/*
 *  Copyright (c) 2018, The OpenThread Authors.
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *  3. Neither the name of the copyright holder nor the
 *     names of its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 */

/* Define to 1 if your C++ compiler doesn't accept -c and -o together. */
/* #undef CXX_NO_MINUS_C_MINUS_O */

/* Define to 1 if you have the <dlfcn.h> header file. */
#define HAVE_DLFCN_H 1

/* Define to 1 if you have the <inttypes.h> header file. */
#define HAVE_INTTYPES_H 1

/* Define to 1 if you have the `memcpy' function. */
/* #undef HAVE_MEMCPY */

/* Define to 1 if you have the <memory.h> header file. */
#define HAVE_MEMORY_H 1

/* Define to 1 if stdbool.h conforms to C99. */
#define HAVE_STDBOOL_H 1

/* Define to 1 if you have the <stdint.h> header file. */
#define HAVE_STDINT_H 1

/* Define to 1 if you have the <stdlib.h> header file. */
#define HAVE_STDLIB_H 1

/* Define to 1 if you have the <strings.h> header file. */
#define HAVE_STRINGS_H 1

/* Define to 1 if you have the <string.h> header file. */
#define HAVE_STRING_H 1

/* Define if strlcat exists. */
/* #undef HAVE_STRLCAT */

/* Define if strlcpy exists. */
/* #undef HAVE_STRLCPY */

/* Define if strnlen exists. */
#define HAVE_STRNLEN 1

/* Define to 1 if you have the <sys/stat.h> header file. */
#define HAVE_SYS_STAT_H 1

/* Define to 1 if you have the <sys/types.h> header file. */
#define HAVE_SYS_TYPES_H 1

/* Define to 1 if you have the <unistd.h> header file. */
#define HAVE_UNISTD_H 1

/* Define to 1 if the system has the type `_Bool'. */
#define HAVE__BOOL 1

/* Define to the sub-directory in which libtool stores uninstalled libraries.
   */
#define LT_OBJDIR ".libs/"

/* Define to 1 if your C compiler doesn't accept -c and -o together. */
/* #undef NO_MINUS_C_MINUS_O */

/* Define to 1 if you want to enable CoAP to an application. */
#define OPENTHREAD_ENABLE_APPLICATION_COAP 1

/* Define to 1 to enable the border agent feature. */
#define OPENTHREAD_ENABLE_BORDER_AGENT 1

/* Define to 1 if you want to enable Border Router */
#define OPENTHREAD_ENABLE_BORDER_ROUTER 1

/* Define to 1 if you want to enable log for certification test */
#define OPENTHREAD_ENABLE_CERT_LOG 1

/* Define to 1 if you want to enable channel manager feature */
#define OPENTHREAD_ENABLE_CHANNEL_MANAGER 0

/* Define to 1 if you want to use channel monitor feature */
#define OPENTHREAD_ENABLE_CHANNEL_MONITOR 0

/* Define to 1 if you want to use child supervision feature */
#define OPENTHREAD_ENABLE_CHILD_SUPERVISION 1

/* Define to 1 to enable the commissioner role. */
#define OPENTHREAD_ENABLE_COMMISSIONER 1

/* Define to 1 if you want to enable DHCPv6 Client */
#define OPENTHREAD_ENABLE_DHCP6_CLIENT 1

/* Define to 1 if you want to enable DHCPv6 Server */
#define OPENTHREAD_ENABLE_DHCP6_SERVER 1

/* Define to 1 if you want to use diagnostics module */
#define OPENTHREAD_ENABLE_DIAG 1

/* Define to 1 if you want to enable DNS Client */
#define OPENTHREAD_ENABLE_DNS_CLIENT 1

/* Define to 1 to enable dtls support. */
#define OPENTHREAD_ENABLE_DTLS 1

/* Define to 1 if you want to use jam detection feature */
#define OPENTHREAD_ENABLE_JAM_DETECTION 1

/* Define to 1 to enable the joiner role. */
#define OPENTHREAD_ENABLE_JOINER 1

/* Define to 1 if you want to use legacy network support */
#define OPENTHREAD_ENABLE_LEGACY 1

/* Define to 1 if you want to use MAC filter feature */
#define OPENTHREAD_ENABLE_MAC_FILTER 1

/* Define to 1 to enable network diagnostic for MTD. */
#define OPENTHREAD_ENABLE_MTD_NETWORK_DIAGNOSTIC 0

/* Define to 1 if you want to enable support for multiple OpenThread
   instances. */
#define OPENTHREAD_ENABLE_MULTIPLE_INSTANCES 0

/* Define to 1 to enable the NCP SPI interface. */
#define OPENTHREAD_ENABLE_NCP_SPI 0

/* Define to 1 if using NCP Spinel Encrypter */
#define OPENTHREAD_ENABLE_NCP_SPINEL_ENCRYPTER 0

/* Define to 1 to enable the NCP UART interface. */
#define OPENTHREAD_ENABLE_NCP_UART 1

/* Define to 1 if using NCP vendor hook */
#define OPENTHREAD_ENABLE_NCP_VENDOR_HOOK 0

/* Define to 1 if you want to enable raw link-layer API */
#define OPENTHREAD_ENABLE_RAW_LINK_API 0

/* Define to 1 if you want to enable Service */
#define OPENTHREAD_ENABLE_SERVICE 1

/* Define to 1 to enable the UDP proxy feature. */
#define OPENTHREAD_ENABLE_UDP_PROXY 1

/* OpenThread examples */
#define OPENTHREAD_EXAMPLES none

/* Define to 1 if you want to use cc2538 examples */
/* #undef OPENTHREAD_EXAMPLES_CC2538 */

/* Define to 1 if you want to use cc2650 examples */
/* #undef OPENTHREAD_EXAMPLES_CC2650 */

/* Define to 1 if you want to use cc2652 examples */
/* #undef OPENTHREAD_EXAMPLES_CC2652 */

/* Define to 1 if you want to use da15000 examples */
/* #undef OPENTHREAD_EXAMPLES_DA15000 */

/* Define to 1 if you want to use efr32 examples */
/* #undef OPENTHREAD_EXAMPLES_EFR32 */

/* Define to 1 if you want to use emsk examples */
/* #undef OPENTHREAD_EXAMPLES_EMSK */

/* Define to 1 if you want to use gp712 examples */
/* #undef OPENTHREAD_EXAMPLES_GP712 */

/* Define to 1 if you want to use kw41z examples */
/* #undef OPENTHREAD_EXAMPLES_KW41Z */

/* Define to 1 if you want to use nrf52840 examples */
/* #undef OPENTHREAD_EXAMPLES_NRF52840 */

/* Define to 1 if you want to use posix examples */
/* #undef OPENTHREAD_EXAMPLES_POSIX */

/* Define to 1 if you want to use samr21 examples */
/* #undef OPENTHREAD_EXAMPLES_SAMR21 */

/* Name of package */
#define PACKAGE "openthread"

/* Define to the address where bug reports for this package should be sent. */
#define PACKAGE_BUGREPORT "openthread-devel@googlegroups.com"

/* Define to the full name of this package. */
#define PACKAGE_NAME "OPENTHREAD"

/* Define to the full name and version of this package. */
#define PACKAGE_STRING "OPENTHREAD gcf8d4ec"

/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "openthread"

/* Define to the home page for this package. */
#define PACKAGE_URL "http://github.com/openthread/openthread"

/* Define to the version of this package. */
#define PACKAGE_VERSION "gcf8d4ec"

/* Define to 1 if you have the ANSI C header files. */
#define STDC_HEADERS 1

/* Version number of package */
#define VERSION "gcf8d4ec"

/* Define for Solaris 2.5.1 so the uint32_t typedef from <sys/synch.h>,
   <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
   #define below would cause a syntax error. */
/* #undef _UINT32_T */

/* Define for Solaris 2.5.1 so the uint64_t typedef from <sys/synch.h>,
   <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
   #define below would cause a syntax error. */
/* #undef _UINT64_T */

/* Define for Solaris 2.5.1 so the uint8_t typedef from <sys/synch.h>,
   <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
   #define below would cause a syntax error. */
/* #undef _UINT8_T */

/* Define to the type of a signed integer type of width exactly 16 bits if
   such a type exists and the standard includes do not define it. */
/* #undef int16_t */

/* Define to the type of a signed integer type of width exactly 32 bits if
   such a type exists and the standard includes do not define it. */
/* #undef int32_t */

/* Define to the type of a signed integer type of width exactly 64 bits if
   such a type exists and the standard includes do not define it. */
/* #undef int64_t */

/* Define to the type of a signed integer type of width exactly 8 bits if such
   a type exists and the standard includes do not define it. */
/* #undef int8_t */

/* Define to the type of an unsigned integer type of width exactly 16 bits if
   such a type exists and the standard includes do not define it. */
/* #undef uint16_t */

/* Define to the type of an unsigned integer type of width exactly 32 bits if
   such a type exists and the standard includes do not define it. */
/* #undef uint32_t */

/* Define to the type of an unsigned integer type of width exactly 64 bits if
   such a type exists and the standard includes do not define it. */
/* #undef uint64_t */

/* Define to the type of an unsigned integer type of width exactly 8 bits if
   such a type exists and the standard includes do not define it. */
/* #undef uint8_t */

/* The settings storage path on android. */
#define OPENTHREAD_CONFIG_POSIX_SETTINGS_PATH "/data/thread"