b
(bool8)Set to 1 if the PHY is enabled, set to 0 otherwise. May be directly enabled to bypass higher-level packet processing in order to implement things like packet sniffers. This property can only be written if the SPINEL_CAP_MAC_RAW
capability is present.
C
(uint8)Value is the current channel. Must be set to one of the values contained in PROP_PHY_CHAN_SUPPORTED
.
A(C)
(array of uint8)Value is a list of channel values that are supported by the hardware.
L
(uint32)Value is the radio frequency (in kilohertz) of the current channel.
c
(int8)Value is the CCA (clear-channel assessment) threshold. Set to -128 to disable.
When setting, the value will be rounded down to a value that is supported by the underlying radio hardware.
c
(int8)Value is the transmit power of the radio.
When setting, the value will be rounded down to a value that is supported by the underlying radio hardware.
c
(int8)Value is the current RSSI (Received signal strength indication) from the radio. This value can be used in energy scans and for determining the ambient noise floor for the operating environment.
c
(int8)Value is the radio receive sensitivity. This value can be used as lower bound noise floor for link metrics computation.