/*
 *  Copyright (c) 2018, The OpenThread Authors.
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *  3. Neither the name of the copyright holder nor the
 *     names of its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 */

/**
 * This header file defines the OpenThread core configuration options used in NCP build for `toranj` test framework.
 *
 */

#if !defined(OPENTHREAD_CORE_TORANJ_CONFIG_SIMULATION_H_) && !defined(OPENTHREAD_CORE_TORANJ_CONFIG_POSIX_H_)
#error "This header file should only be included through the platform-specific one"
#endif

#ifndef OPENTHREAD_RADIO
#define OPENTHREAD_RADIO 0
#endif

#ifndef OPENTHREAD_RADIO
#define OPENTHREAD_RADIO_CLI 0
#endif

/**
 * @def OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE
 *
 * Define to 1 to enable Thread Test Harness reference device support.
 *
 */
#define OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_UPTIME_ENABLE
 *
 * Define to 1 to enable tracking the uptime of OpenThread instance.
 *
 */
#define OPENTHREAD_CONFIG_UPTIME_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE
 *
 * Define to 1 to enable Border Router support.
 *
 */
#define OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_COMMISSIONER_ENABLE
 *
 * Define to 1 to enable Commissioner support.
 *
 */
#define OPENTHREAD_CONFIG_COMMISSIONER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES
 *
 * The maximum number of Joiner entries maintained by the Commissioner.
 *
 */
#define OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES 4

/**
 * @def OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE
 *
 * Define to 1 to enable Border Agent support.
 *
 */
#define OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_DIAG_ENABLE
 *
 * Define to 1 to enable Factory Diagnostics support.
 *
 */
#define OPENTHREAD_CONFIG_DIAG_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_JOINER_ENABLE
 *
 * Define to 1 to enable Joiner support.
 *
 */
#define OPENTHREAD_CONFIG_JOINER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE
 *
 * Define to 1 to support injecting Service entries into the Thread Network Data.
 *
 */
#define OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE
 *
 * Define to 1 to enable Network Data Publisher.
 *
 */
#define OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE
 *
 * Define to 1 to enable TMF anycast locator functionality.
 *
 */
#define OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_LEGACY_ENABLE
 *
 * Define to 1 to enable legacy network support.
 *
 */
#define OPENTHREAD_CONFIG_LEGACY_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_ECDSA_ENABLE
 *
 * Define to 1 to enable ECDSA support.
 *
 */
#define OPENTHREAD_CONFIG_ECDSA_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE
 *
 * Define to 1 to enable the Jam Detection service.
 *
 */
#define OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS
 *
 * The number of message buffers in the buffer pool.
 *
 */
#define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS 256

/**
 * @def OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE
 *
 * Whether use heap allocator for message buffers.
 *
 */
#define OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE 0

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES
 *
 * The number of EID-to-RLOC cache entries.
 *
 */
#define OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES 16

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT
 *
 * The timeout value (in seconds) waiting for a address notification response after sending an address query.
 *
 * Default: 3 seconds
 *
 */
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT 6

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY
 *
 * Initial retry delay for address query (in seconds).
 *
 */
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY 4

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY
 *
 * Maximum retry delay for address query (in seconds).
 *
 * Default: 28800 seconds (480 minutes or 8 hours)
 *
 */
#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY 120

/**
 * @def OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_MAX_SNOOP_ENTRIES
 *
 * The maximum number of EID-to-RLOC cache entries that can be uses for "snoop optimization" where an entry is created
 * by inspecting a received message.
 *
 */
#define OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_MAX_SNOOP_ENTRIES 2

/**
 * @def OPENTHREAD_CONFIG_TMF_SNOOP_CACHE_ENTRY_TIMEOUT
 *
 * The timeout value (in seconds) blocking eviction of an address cache entry created through snoop optimization (i.e.,
 * inspection of a received message). After the timeout expires the entry can be reclaimed again. This timeout allows
 * a longer response delay for a received message giving more chance that a snooped entry will be used (avoiding
 * sending Address Query when a response message is sent to same destination from which the message was received
 * earlier).
 *
 */
#define OPENTHREAD_CONFIG_TMF_SNOOP_CACHE_ENTRY_TIMEOUT 3

/**
 * @def OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
 *
 * The maximum number of children.
 *
 */
#define OPENTHREAD_CONFIG_MLE_MAX_CHILDREN 32

/**
 * @def OPENTHREAD_CONFIG_MLE_CHILD_TIMEOUT_DEFAULT
 *
 * The default child timeout value (in seconds).
 *
 */
#define OPENTHREAD_CONFIG_MLE_CHILD_TIMEOUT_DEFAULT 120

/**
 * @def OPENTHREAD_CONFIG_MLE_IP_ADDRS_PER_CHILD
 *
 * The maximum number of supported IPv6 address registrations per child.
 *
 */
#define OPENTHREAD_CONFIG_MLE_IP_ADDRS_PER_CHILD 10

/**
 * @def OPENTHREAD_CONFIG_IP6_MAX_EXT_UCAST_ADDRS
 *
 * The maximum number of supported IPv6 addresses allows to be externally added.
 *
 */
#define OPENTHREAD_CONFIG_IP6_MAX_EXT_UCAST_ADDRS 8

/**
 * @def OPENTHREAD_CONFIG_IP6_MAX_EXT_MCAST_ADDRS
 *
 * The maximum number of supported IPv6 multicast addresses allows to be externally added.
 *
 */
#define OPENTHREAD_CONFIG_IP6_MAX_EXT_MCAST_ADDRS 4

/**
 * @def OPENTHREAD_CONFIG_MAC_FILTER_ENABLE
 *
 * Define to 1 to enable MAC filter support.
 *
 */
#define OPENTHREAD_CONFIG_MAC_FILTER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_MAC_FILTER_SIZE
 *
 * The number of MAC Filter entries.
 *
 */
#define OPENTHREAD_CONFIG_MAC_FILTER_SIZE 80

/**
 * @def OPENTHREAD_CONFIG_LOG_LEVEL
 *
 * The log level (used at compile time).
 *
 */
#define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_INFO

/**
 * @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
 *
 * Define as 1 to enable dynamic log level control.
 *
 */
#define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME
 *
 * Define as 1 to prepend the current uptime to all log messages.
 *
 */
#define OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME 1

/**
 * @def OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL
 *
 * Define to prepend the log level to all log messages
 *
 */
#define OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL 1

/**
 * @def OPENTHREAD_CONFIG_LOG_PREPEND_REGION
 *
 * Define to prepend the log region to all log messages
 *
 */
#define OPENTHREAD_CONFIG_LOG_PREPEND_REGION 1

/**
 * @def OPENTHREAD_CONFIG_LOG_SUFFIX
 *
 * Define suffix to append at the end of logs.
 *
 */
#define OPENTHREAD_CONFIG_LOG_SUFFIX ""

/**
 * @def OPENTHREAD_CONFIG_LOG_PLATFORM
 *
 * Define to enable platform region logging.
 *
 */
#define OPENTHREAD_CONFIG_LOG_PLATFORM 1

/**
 * @def OPENTHREAD_CONFIG_NCP_HDLC_ENABLE
 *
 * Define to 1 to enable NCP HDLC support.
 *
 */
#define OPENTHREAD_CONFIG_NCP_HDLC_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE
 *
 *  The size of NCP message buffer in bytes
 *
 */
#define OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE 4096

/**
 * @def OPENTHREAD_CONFIG_MLE_STEERING_DATA_SET_OOB_ENABLE
 *
 * Enable setting steering data out of band.
 *
 */
#define OPENTHREAD_CONFIG_MLE_STEERING_DATA_SET_OOB_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
 *
 * Define as 1 for a child to inform its previous parent when it attaches to a new parent.
 *
 * If this feature is enabled, when a device attaches to a new parent, it will send an IP message (with empty payload
 * and mesh-local IP address as the source address) to its previous parent.
 *
 */
#define OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH 1

/**
 * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE
 *
 * Define as 1 to enable Channel Manager support.
 *
 */
#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE
 *
 * Define as 1 to enable Channel Monitor support.
 *
 */
#define OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_MINIMUM_DELAY
 *
 * The minimum delay in seconds used by Channel Manager module for performing a channel change.
 *
 * The minimum delay should preferably be longer than maximum data poll interval used by all sleepy-end-devices within
 * the Thread network.
 *
 * Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
 *
 */
#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_MINIMUM_DELAY 2

/**
 * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_SKIP_FAVORED
 *
 * This threshold specifies the minimum occupancy rate difference between two channels for the Channel Manager to
 * prefer an unfavored channel over the best favored one. This is used when (auto) selecting a channel based on the
 * collected channel quality data by "channel monitor" feature.
 *
 * The difference is based on the `ChannelMonitor::GetChannelOccupancy()` definition which provides the average
 * percentage of RSSI samples (within a time window) indicating that channel was busy (i.e., RSSI value higher than
 * a threshold). Value 0 maps to 0% and 0xffff maps to 100%.
 *
 * Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
 *
 */
#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_SKIP_FAVORED (0xffff * 7 / 100)

/**
 * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_CHANGE_CHANNEL
 *
 * This threshold specifies the minimum occupancy rate difference required between the current channel and a newly
 * selected channel for Channel Manager to allow channel change to the new channel.
 *
 * The difference is based on the `ChannelMonitor::GetChannelOccupancy()` definition which provides the average
 * percentage of RSSI samples (within a time window) indicating that channel was busy (i.e., RSSI value higher than
 * a threshold). Value 0 maps to 0% rate and 0xffff maps to 100%.
 *
 * Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
 *
 */
#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_CHANGE_CHANNEL (0xffff * 10 / 100)

/**
 * @def OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE
 *
 * Define to 1 to enable Child Supervision support.
 *
 */
#define OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_TMF_PENDING_DATASET_MINIMUM_DELAY
 *
 * Minimum Delay Timer value for a Pending Operational Dataset (in ms).
 *
 * Thread specification defines this value as 30,000. Changing from the specified value should be done for testing only.
 *
 * For `toranj` test script the value is decreased so that the tests can be run faster.
 *
 */
#define OPENTHREAD_CONFIG_TMF_PENDING_DATASET_MINIMUM_DELAY 1000

/**
 * @def OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL
 *
 * Define to 1 to enable support controlling of desired power state of NCP's micro-controller.
 *
 * The power state specifies the desired power state of NCP's micro-controller (MCU) when the underlying platform's
 * operating system enters idle mode (i.e., all active tasks/events are processed and the MCU can potentially enter a
 * energy-saving power state).
 *
 * The power state primarily determines how the host should interact with the NCP and whether the host needs an
 * external trigger (a "poke") before it can communicate with the NCP or not.
 *
 * When enabled, the platform is expected to provide `otPlatSetMcuPowerState()` and `otPlatGetMcuPowerState()`
 * functions (please see `openthread/platform/misc.h`). Host can then control the power state using
 * `SPINEL_PROP_MCU_POWER_STATE`.
 *
 */
#define OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL 1

/**
 * @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE
 *
 * Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread.
 *
 */
#define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE
 *
 * Define to 1 to enable DNS Client support.
 *
 */
#define OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE
 *
 * Define to 1 to enable SRP Client support.
 *
 */
#define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_SRP_SERVER_ENABLE
 *
 * Define to 1 to enable SRP Server support.
 *
 */
#define OPENTHREAD_CONFIG_SRP_SERVER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_CHANGE_ENABLE
 *
 * Define to 1 for the SRP client implementation to provides APIs to allow domain name to be set/changed.
 *
 */
#define OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_API_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE
 *
 * Define as 1 to enable History Tracker module.
 *
 */
#define OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE
 *
 * Define to 1 to enable DNS-SD Server support.
 *
 */
#define OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE 1

#if OPENTHREAD_RADIO
/**
 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
 *
 * Define to 1 if you want to enable software ACK timeout logic.
 *
 */
#define OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
 *
 * Define to 1 if you want to enable software retransmission logic.
 *
 */
#define OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
 *
 * Define to 1 if you want to enable software CSMA-CA backoff logic.
 *
 */
#define OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
 *
 * Define to 1 if you want to enable software transmission security logic.
 *
 */
#define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE 1

/**
 * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE
 *
 * Define to 1 to enable software transmission target time logic.
 *
 */
#define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE 1
#endif // OPENTHREAD_RADIO