Usage : br [command] ...
Usage: br help
Print BR command help menu.
> br help counters disable enable omrprefix onlinkprefix prefixtable rioprf routeprf state Done
Usage: br init <interface> <enabled>
Initializes the Border Routing Manager on given infrastructure interface.
> br init 2 1 Done
Usage: br enable
Enable the Border Routing functionality.
> br enable Done
Usage: br disable
Disable the Border Routing functionality.
> br disable Done
Usage: br state
Get the Border Routing state:
uninitialized: Routing Manager is uninitialized.disabled: Routing Manager is initialized but disabled.stopped: Routing Manager in initialized and enabled but currently stopped.running: Routing Manager is initialized, enabled, and running.> br state running
Usage : br counters
Get the Border Router counter.
> br counters Inbound Unicast: Packets 4 Bytes 320 Inbound Multicast: Packets 0 Bytes 0 Outbound Unicast: Packets 2 Bytes 160 Outbound Multicast: Packets 0 Bytes 0 RA Rx: 4 RA TxSuccess: 2 RA TxFailed: 0 RS Rx: 0 RS TxSuccess: 2 RS TxFailed: 0 Done
Usage: br omrprefix [local|favored]
Get local or favored or both off-mesh-routable prefixes of the Border Router.
> br omrprefix Local: fdfc:1ff5:1512:5622::/64 Favored: fdfc:1ff5:1512:5622::/64 prf:low Done > br omrprefix favored fdfc:1ff5:1512:5622::/64 prf:low Done > br omrprefix local fdfc:1ff5:1512:5622::/64 Done
Usage: br onlinkprefix [local|favored]
Get local or favored or both on-link prefixes of the Border Router.
> br onlinkprefix Local: fd41:2650:a6f5:0::/64 Favored: 2600::0:1234:da12::/64 Done > br onlinkprefix favored 2600::0:1234:da12::/64 Done > br onlinkprefix local fd41:2650:a6f5:0::/64 Done
Usage: br nat64prefix [local|favored]
Get local or favored or both NAT64 prefixes of the Border Router.
OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE is required.
> br nat64prefix Local: fd14:1078:b3d5:b0b0:0:0::/96 Favored: fd14:1078:b3d5:b0b0:0:0::/96 prf:low Done > br nat64prefix favored fd14:1078:b3d5:b0b0:0:0::/96 prf:low Done > br nat64prefix fd14:1078:b3d5:b0b0:0:0::/96 Done
Usage: br prefixtable
Get the discovered prefixes by Border Routing Manager on the infrastructure link.
> br prefixtable prefix:fd00:1234:5678:0::/64, on-link:no, ms-since-rx:29526, lifetime:1800, route-prf:med, router:ff02:0:0:0:0:0:0:1 prefix:1200:abba:baba:0::/64, on-link:yes, ms-since-rx:29527, lifetime:1800, preferred:1800, router:ff02:0:0:0:0:0:0:1 Done
Usage: br rioprf
Get the preference used when advertising Route Info Options (e.g., for discovered OMR prefixes) in emitted Router Advertisement message.
> br rioprf med Done
Usage: br rioprf high|med|low
Set the preference (which may be ‘high’, ‘med’, or ‘low’) to use when advertising Route Info Options (e.g., for discovered OMR prefixes) in emitted Router Advertisement message.
> br rioprf low Done
Usage: br rioprf clear
Clear a previously set preference value for advertising Route Info Options (e.g., for discovered OMR prefixes) in emitted Router Advertisement message. When cleared BR will use device's role to determine the RIO preference: Medium preference when in router/leader role and low preference when in child role.
> br rioprf clear Done
Usage: br routeprf
Get the preference used for publishing routes in Thread Network Data. This may be the automatically determined route preference, or an administratively set fixed route preference - if applicable.
> br routeprf med Done
Usage: br routeprf high|med|low
Set the preference (which may be ‘high’, ‘med’, or ‘low’) to use publishing routes in Thread Network Data. Setting a preference value overrides the automatic route preference determination. It is used only for an explicit administrative configuration of a Border Router.
> br routeprf low Done
Usage: br routeprf clear
Clear a previously set preference value for publishing routes in Thread Network Data. When cleared BR will automatically determine the route preference based on device's role and link quality to parent (when acting as end-device).
> br routeprf clear Done