/*
 *  Copyright (c) 2019, The OpenThread Authors.
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are met:
 *  1. Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *  2. Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *  3. Neither the name of the copyright holder nor the
 *     names of its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef OPENTHREAD_PLATFORM_CONFIG_H_
#define OPENTHREAD_PLATFORM_CONFIG_H_

#include "openthread-core-config.h"

/**
 * @file
 * @brief
 *   This file includes the POSIX platform-specific configurations.
 */

/**
 * @def OPENTHREAD_POSIX_CONFIG_RCP_PTY_ENABLE
 *
 * Define as 1 to enable PTY RCP support.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_RCP_PTY_ENABLE
#define OPENTHREAD_POSIX_CONFIG_RCP_PTY_ENABLE 1
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_DAEMON_SOCKET_BASENAME
 *
 * Define socket basename used by POSIX app daemon.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_DAEMON_SOCKET_BASENAME
#ifdef __linux__
#define OPENTHREAD_POSIX_CONFIG_DAEMON_SOCKET_BASENAME "/run/openthread-%s"
#else
#define OPENTHREAD_POSIX_CONFIG_DAEMON_SOCKET_BASENAME "/tmp/openthread-%s"
#endif
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_DAEMON_ENABLE
 *
 * Define to 1 to enable POSIX daemon.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_DAEMON_ENABLE
#define OPENTHREAD_POSIX_CONFIG_DAEMON_ENABLE 0
#endif

/**
 * RCP bus UART.
 *
 * @note This value is also for simulated UART bus.
 *
 */
#define OT_POSIX_RCP_BUS_UART 1

/**
 * RCP bus SPI.
 *
 */
#define OT_POSIX_RCP_BUS_SPI 2

/**
 * @def OPENTHREAD_POSIX_CONFIG_RCP_BUS
 *
 * This setting configures what type of RCP bus to use.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_RCP_BUS
#define OPENTHREAD_POSIX_CONFIG_RCP_BUS OT_POSIX_RCP_BUS_UART
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_MAX_POWER_TABLE_ENABLE
 *
 * Define as 1 to enable max power table support.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_MAX_POWER_TABLE_ENABLE
#define OPENTHREAD_POSIX_CONFIG_MAX_POWER_TABLE_ENABLE 0
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_MAX_MULTICAST_FORWARDING_CACHE_TABLE
 *
 * This setting configures the maximum number of Multicast Forwarding Cache table for POSIX native multicast routing.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_MAX_MULTICAST_FORWARDING_CACHE_TABLE
#define OPENTHREAD_POSIX_CONFIG_MAX_MULTICAST_FORWARDING_CACHE_TABLE (OPENTHREAD_CONFIG_MAX_MULTICAST_LISTENERS * 10)
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_SECURE_SETTINGS_ENABLE
 *
 * Define as 1 to enable the secure settings. When defined to 1, the platform MUST implement the otPosixSecureSetting*
 * APIs defined in 'src/posix/platform/include/openthread/platform/secure_settings.h'.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_SECURE_SETTINGS_ENABLE
#define OPENTHREAD_POSIX_CONFIG_SECURE_SETTINGS_ENABLE 0
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_NETIF_PREFIX_ROUTE_METRIC
 *
 * This setting configures the prefix route metric on the Thread network interface.
 * Define as 0 to use use the default prefix route metric.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_NETIF_PREFIX_ROUTE_METRIC
#define OPENTHREAD_POSIX_CONFIG_NETIF_PREFIX_ROUTE_METRIC 0
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_INSTALL_EXTERNAL_ROUTES_ENABLE
 *
 * Define as 1 to add external routes to POSIX kernel when external routes are changed in netdata.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_INSTALL_EXTERNAL_ROUTES_ENABLE
#define OPENTHREAD_POSIX_CONFIG_INSTALL_EXTERNAL_ROUTES_ENABLE 1
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_EXTERNAL_ROUTE_PRIORITY
 *
 * This macro defines the priority of external routes added to kernel. The larger the number, the lower the priority. We
 * need to assign a low priority to such routes so that kernel prefers the infra link rather than thread. Otherwise we
 * may unnecessarily transmit packets via thread, which potentially causes performance issue. In linux, normally infra
 * link routes' metric value is not greater than 1024, hence 65535 should be big enough.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_EXTERNAL_ROUTE_PRIORITY
#define OPENTHREAD_POSIX_CONFIG_EXTERNAL_ROUTE_PRIORITY 65535
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_MAX_EXTERNAL_ROUTE_NUM
 *
 * This macro defines the max number of external routes that can be added to kernel.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_MAX_EXTERNAL_ROUTE_NUM
#define OPENTHREAD_POSIX_CONFIG_MAX_EXTERNAL_ROUTE_NUM 8
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE
 *
 * Define as 1 to enable firewall.
 *
 * The rules are implemented using ip6tables and ipset. The rules are as follows.
 *
 * ip6tables -A $OTBR_FORWARD_INGRESS_CHAIN -m pkttype --pkt-type unicast -i $THREAD_IF -p ip -j DROP
 * ip6tables -A $OTBR_FORWARD_INGRESS_CHAIN -m set --match-set otbr-ingress-deny-src src -p ip -j DROP
 * ip6tables -A $OTBR_FORWARD_INGRESS_CHAIN -m set --match-set otbr-ingress-allow-dst dst -p ip -j ACCEPT
 * ip6tables -A $OTBR_FORWARD_INGRESS_CHAIN -m pkttype --pkt-type unicast -p ip -j DROP
 * ip6tables -A $OTBR_FORWARD_INGRESS_CHAIN -p ip -j ACCEPT
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE
#define OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE 0
#endif

#if OPENTHREAD_POSIX_CONFIG_FIREWALL_ENABLE
#ifndef OPENTHREAD_POSIX_CONFIG_IPSET_BINARY
#define OPENTHREAD_POSIX_CONFIG_IPSET_BINARY "ipset"
#endif
#endif

#ifdef __APPLE__

/**
 * Use built-in utun driver on mac OS
 */
#define OT_POSIX_CONFIG_MACOS_UTUN 1

/**
 * Use open-source tun driver on mac OS
 */
#define OT_POSIX_CONFIG_MACOS_TUN 2

/**
 * @def OPENTHREAD_POSIX_CONFIG_MACOS_TUN_OPTION
 *
 * This setting configures which tunnel driver to use.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_MACOS_TUN_OPTION
#define OPENTHREAD_POSIX_CONFIG_MACOS_TUN_OPTION OT_POSIX_CONFIG_MACOS_UTUN
#endif

#endif // __APPLE__

//---------------------------------------------------------------------------------------------------------------------
// Removed or renamed POSIX specific configs.

#ifdef OPENTHREAD_CONFIG_POSIX_APP_TREL_INTERFACE_NAME
#error "OPENTHREAD_CONFIG_POSIX_APP_TREL_INTERFACE_NAME was removed (no longer applicable with TREL over DNS-SD)."
#endif

#ifdef OPENTHREAD_CONFIG_POSIX_TREL_USE_NETLINK_SOCKET
#error "OPENTHREAD_CONFIG_POSIX_TREL_USE_NETLINK_SOCKET was removed (no longer applicable with TREL over DNS-SD)."
#endif

/**
 * @def OPENTHREAD_POSIX_CONFIG_TREL_UDP_PORT
 *
 * This setting configures the TREL UDP port number.
 * Define as 0 to use an ephemeral port number.
 *
 */
#ifndef OPENTHREAD_POSIX_CONFIG_TREL_UDP_PORT
#define OPENTHREAD_POSIX_CONFIG_TREL_UDP_PORT 0
#endif

#endif // OPENTHREAD_PLATFORM_CONFIG_H_