blob: 1b056add7ac355b55caa70873df22a23ed5edeb5 [file] [log] [blame]
#
# Copyright (c) 2019, The OpenThread Authors.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 3. Neither the name of the copyright holder nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
.NOTPARALLEL:
AR = arm-none-eabi-ar
CCAS = $(CCPREFIX) arm-none-eabi-gcc
CPP = arm-none-eabi-cpp
CC = $(CCPREFIX) arm-none-eabi-gcc
CXX = $(CCPREFIX) arm-none-eabi-g++
LD = arm-none-eabi-ld
STRIP = arm-none-eabi-strip
NM = arm-none-eabi-nm
RANLIB = arm-none-eabi-ranlib
OBJCOPY = arm-none-eabi-objcopy
BuildJobs ?= 10
GCCVersion = $(shell expr `$(CC) -dumpversion | cut -f1 -d.`)
configure_OPTIONS = \
--enable-cli \
--enable-ftd \
--enable-mtd \
--enable-ncp \
--enable-radio-only \
--enable-linker-map \
--with-examples=qpg6095 \
MBEDTLS_CPPFLAGS="$(QPG6095_MBEDTLS_CPPFLAGS)" \
$(NULL)
TopSourceDir := $(dir $(shell readlink $(firstword $(MAKEFILE_LIST))))..
AbsTopSourceDir := $(dir $(realpath $(firstword $(MAKEFILE_LIST))))..
QPG6095_CONFIG_FILE_CPPFLAGS = -DOPENTHREAD_PROJECT_CORE_CONFIG_FILE='\"openthread-core-qpg6095-config.h\"'
QPG6095_CONFIG_FILE_CPPFLAGS += -DOPENTHREAD_CORE_CONFIG_PLATFORM_CHECK_FILE='\"openthread-core-qpg6095-config-check.h\"'
QPG6095_CONFIG_FILE_CPPFLAGS += -I$(PWD)/examples/platforms/qpg6095/
QPG6095_MBEDTLS_CPPFLAGS = -DMBEDTLS_CONFIG_FILE='\"mbedtls-config.h\"'
QPG6095_MBEDTLS_CPPFLAGS += -DMBEDTLS_USER_CONFIG_FILE='\"qpg6095-mbedtls-config.h\"'
QPG6095_MBEDTLS_CPPFLAGS += -I$(PWD)/examples/platforms/qpg6095/crypto
QPG6095_MBEDTLS_CPPFLAGS += -I$(PWD)/third_party/mbedtls
QPG6095_MBEDTLS_CPPFLAGS += -I$(PWD)/third_party/mbedtls/repo/include
QPG6095_MBEDTLS_CPPFLAGS += -I$(PWD)/third_party/mbedtls/repo/include/mbedtls
COMMONCFLAGS := \
-fdata-sections \
-ffunction-sections \
-Os \
-g \
$(QPG6095_CONFIG_FILE_CPPFLAGS) \
$(NULL)
include $(dir $(abspath $(lastword $(MAKEFILE_LIST))))/common-switches.mk
CPPFLAGS += \
$(COMMONCFLAGS) \
$(target_CPPFLAGS) \
$(NULL)
CFLAGS += \
$(COMMONCFLAGS) \
$(target_CFLAGS) \
$(NULL)
CXXFLAGS += \
$(COMMONCFLAGS) \
$(target_CXXFLAGS) \
-fno-exceptions \
-fno-rtti \
$(NULL)
LDFLAGS += \
$(COMMONCFLAGS) \
$(target_LDFLAGS) \
-specs=nano.specs \
-specs=nosys.specs \
-Wl,--gc-sections \
$(NULL)
ECHO := @echo
MAKE := make
MKDIR_P := mkdir -p
LN_S := ln -s
RM_F := rm -f
INSTALL := /usr/bin/install
INSTALLFLAGS := -p
BuildPath = build
TopBuildDir = $(BuildPath)
AbsTopBuildDir = $(PWD)/$(TopBuildDir)
ResultPath = output
TopResultDir = $(ResultPath)
AbsTopResultDir = $(PWD)/$(TopResultDir)
TargetTuple = qpg6095
ARCHS = cortex-m4
TopTargetLibDir = $(TopResultDir)/$(TargetTuple)/lib
ifndef BuildJobs
BuildJobs := $(shell getconf _NPROCESSORS_ONLN)
endif
JOBSFLAG := -j$(BuildJobs)
#
# configure-arch <arch>
#
# Configure OpenThread for the specified architecture.
#
# arch - The architecture to configure.
#
define configure-arch
$(ECHO) " CONFIG $(TargetTuple)..."
(cd $(BuildPath)/$(TargetTuple) && $(AbsTopSourceDir)/configure \
INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
CPP="$(CPP)" CC="$(CC)" CXX="$(CXX)" CCAS="$(CCAS)" OBJC="$(OBJC)" OBJCXX="$(OBJCXX)" AR="$(AR)" RANLIB="$(RANLIB)" NM="$(NM)" STRIP="$(STRIP)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" CXXFLAGS="$(CXXFLAGS)" CCASFLAGS="$(CCASFLAGS)" LDFLAGS="$(LDFLAGS)" \
--host=arm-none-eabi \
--prefix=/ \
--exec-prefix=/$(TargetTuple) \
$(configure_OPTIONS))
endef # configure-arch
#
# build-arch <arch>
#
# Build the OpenThread intermediate build products for the specified
# architecture.
#
# arch - The architecture to build.
#
define build-arch
$(ECHO) " BUILD $(TargetTuple)"
$(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(TargetTuple) --no-print-directory \
all
endef # build-arch
#
# stage-arch <arch>
#
# Stage (install) the OpenThread final build products for the specified
# architecture.
#
# arch - The architecture to stage.
#
define stage-arch
$(ECHO) " STAGE $(TargetTuple)"
$(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(TargetTuple) --no-print-directory \
DESTDIR=$(AbsTopResultDir) \
install
endef # stage-arch
# @FIXME: get the filenames of the targets of OBJCOPY (now they are hardcoded)
define hex-arch
$(ECHO) " HEX $(TargetTuple)"
$(OBJCOPY) -O ihex $(AbsTopResultDir)/$(TargetTuple)/bin/ot-cli-mtd $(AbsTopResultDir)/$(TargetTuple)/bin/ot-cli-mtd.hex
$(OBJCOPY) -O ihex $(AbsTopResultDir)/$(TargetTuple)/bin/ot-cli-ftd $(AbsTopResultDir)/$(TargetTuple)/bin/ot-cli-ftd.hex
endef # hex-arch
#
# ARCH_template <arch>
#
# Define macros, targets and rules to configure, build, and stage the
# OpenThread for a single architecture.
#
# arch - The architecture to instantiate the template for.
#
define ARCH_template
CONFIGURE_TARGETS += configure-$(1)
BUILD_TARGETS += do-build-$(1)
HEX_TARGETS += hex-$(1)
STAGE_TARGETS += stage-$(1)
BUILD_DIRS += $(BuildPath)/$(TargetTuple)
DIRECTORIES += $(BuildPath)/$(TargetTuple)
configure-$(1): target_CPPFLAGS=$($(1)_target_CPPFLAGS)
configure-$(1): target_CFLAGS=$($(1)_target_CFLAGS)
configure-$(1): target_CXXFLAGS=$($(1)_target_CXXFLAGS)
configure-$(1): target_LDFLAGS=$($(1)_target_LDFLAGS)
configure-$(1): target_CCASFLAGS=$($(1)_target_CCASFLAGS)
configure-$(1): $(BuildPath)/$(TargetTuple)/config.status
$(BuildPath)/$(TargetTuple)/config.status: | $(BuildPath)/$(TargetTuple)
$$(call configure-arch,$(1))
do-build-$(1): configure-$(1)
do-build-$(1):
+$$(call build-arch,$(1))
hex-$(1): stage-$(1)
hex-$(1):
$$(call hex-arch,$(1))
$(1): hex-$(1)
stage-$(1): do-build-$(1)
stage-$(1): | $(TopResultDir)
$$(call stage-arch,$(1))
endef # ARCH_template
.DEFAULT_GOAL := all
all: hex
#
# cortex-m4
#
cortex-m4_target_ABI = cortex-m4
cortex-m4_target_CPPFLAGS = -mcpu=cortex-m4 -mthumb -ffunction-sections
cortex-m4_target_CFLAGS = -mcpu=cortex-m4 -mthumb -ffunction-sections
cortex-m4_target_CXXFLAGS = -mcpu=cortex-m4 -mthumb -ffunction-sections
cortex-m4_target_LDFLAGS = -mcpu=cortex-m4 -mthumb -ffunction-sections
# Instantiate an architecture-specific build template for each target
# architecture.
$(foreach arch,$(ARCHS),$(eval $(call ARCH_template,$(arch))))
#
# Common / Finalization
#
configure: $(CONFIGURE_TARGETS)
build: $(BUILD_TARGETS)
stage: $(STAGE_TARGETS)
hex: $(HEX_TARGETS)
DIRECTORIES = $(TopResultDir) $(TopResultDir)/$(TargetTuple)/lib $(BUILD_DIRS)
CLEAN_DIRS = $(TopResultDir) $(BUILD_DIRS)
all: hex
$(DIRECTORIES):
$(ECHO) " MKDIR $@"
@$(MKDIR_P) "$@"
clean:
$(ECHO) " CLEAN"
@$(RM_F) -r $(CLEAN_DIRS)
help:
$(ECHO) "Simply type 'make -f $(firstword $(MAKEFILE_LIST))' to build OpenThread for the following "
$(ECHO) "architectures: "
$(ECHO) ""
$(ECHO) " $(ARCHS)"
$(ECHO) ""
$(ECHO) "To build only a particular architecture, specify: "
$(ECHO) ""
$(ECHO) " make -f $(firstword $(MAKEFILE_LIST)) <architecture>"
$(ECHO) ""