#
#  Copyright (c) 2020, The OpenThread Authors.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. Neither the name of the copyright holder nor the
#     names of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.
#

.NOTPARALLEL:

AR                              = arm-none-eabi-ar
CCAS                            = arm-none-eabi-as
CPP                             = arm-none-eabi-cpp
CC                              = arm-none-eabi-gcc
CXX                             = arm-none-eabi-g++
LD                              = arm-none-eabi-ld
STRIP                           = arm-none-eabi-strip
NM                              = arm-none-eabi-nm
RANLIB                          = arm-none-eabi-ranlib
OBJCOPY                         = arm-none-eabi-objcopy

BuildJobs                      ?= 10

configure_OPTIONS               = \
    --enable-cli                  \
    --enable-ftd                  \
    --enable-mtd                  \
    --enable-ncp                  \
    --enable-radio-only           \
    --enable-linker-map           \
    --with-examples=efr32mg13     \
    MBEDTLS_CPPFLAGS="$(EFR32_MBEDTLS_CPPFLAGS)" \
    $(NULL)

ifneq ($(DISABLE_BUILTIN_MBEDTLS), 1)
configure_OPTIONS              += MBEDTLS_CPPFLAGS="$(EFR32_MBEDTLS_CPPFLAGS)"
endif

TopSourceDir                    := $(dir $(shell readlink $(firstword $(MAKEFILE_LIST))))..
AbsTopSourceDir                 := $(dir $(realpath $(firstword $(MAKEFILE_LIST))))..


#
# Differentiate between boards
# - BRD4168A / SLWSTK6000B / MGM13P Module / 2.4GHz@19dBm
#
ifeq ($(BOARD),BRD4168A)
MCU = EFR32MG13P732F512GM48
else
$(error Please provide a value for BOARD variable e.g BOARD=BRD4168A (currently supported BRD4168A))
endif

EFR32_MBEDTLS_CPPFLAGS  = -DMBEDTLS_CONFIG_FILE='\"mbedtls-config.h\"'
EFR32_MBEDTLS_CPPFLAGS += -DMBEDTLS_USER_CONFIG_FILE='\"efr32-mbedtls-config.h\"'
EFR32_MBEDTLS_CPPFLAGS += -D$(MCU)
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/examples/platforms/efr32mg13/crypto
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/silabs/gecko_sdk_suite/v2.7/util/third_party/mbedtls/configs
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/silabs/gecko_sdk_suite/v2.7/platform/CMSIS/Include
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/silabs/gecko_sdk_suite/v2.7/util/third_party/mbedtls/sl_crypto/include
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/silabs/gecko_sdk_suite/v2.7/platform/Device/SiliconLabs/EFR32MG13P/Include
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/silabs/gecko_sdk_suite/v2.7/platform/emlib/inc
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/silabs/gecko_sdk_suite/v2.7/platform/radio/rail_lib/chip/efr32/efr32xg1x
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/mbedtls
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/mbedtls/repo/include
EFR32_MBEDTLS_CPPFLAGS += -I$(AbsTopSourceDir)/third_party/mbedtls/repo/include/mbedtls

CONFIG_FILE_PATH = $(AbsTopSourceDir)/examples/platforms/efr32mg13/
HAL_CONF_DIR     = $(CONFIG_FILE_PATH)/$(shell echo $(BOARD) | tr A-Z a-z)

EFR32MG13_CONFIG_FILE_CPPFLAGS  = -DOPENTHREAD_PROJECT_CORE_CONFIG_FILE='\"openthread-core-efr32-config.h\"'
EFR32MG13_CONFIG_FILE_CPPFLAGS += -DOPENTHREAD_CORE_CONFIG_PLATFORM_CHECK_FILE='\"openthread-core-efr32-config-check.h\"'
EFR32MG13_CONFIG_FILE_CPPFLAGS += -I$(CONFIG_FILE_PATH)

COMMONCFLAGS                       := \
    -fdata-sections                   \
    -ffunction-sections               \
    -Os                               \
    -g                                \
    -I$(HAL_CONF_DIR)                 \
    -D__START=main                    \
    -D$(MCU)                          \
    $(EFR32MG13_CONFIG_FILE_CPPFLAGS) \
    $(NULL)

include $(dir $(abspath $(lastword $(MAKEFILE_LIST))))/common-switches.mk

#
# Platform-Specific switches
#

DMP                            ?= 0
RADIODEBUG                     ?= 0

ifeq ($(DMP),1)
COMMONCFLAGS                   += -DRADIO_CONFIG_DMP_SUPPORT=1
endif

ifeq ($(RADIODEBUG),1)
COMMONCFLAGS                   += -DRADIO_CONFIG_DEBUG_COUNTERS_SUPPORT=1
endif

CPPFLAGS                       += \
    $(COMMONCFLAGS)               \
    $(target_CPPFLAGS)            \
    $(NULL)

CFLAGS                         += \
    $(COMMONCFLAGS)               \
    $(target_CFLAGS)              \
    $(NULL)

CXXFLAGS                       += \
    $(COMMONCFLAGS)               \
    $(target_CXXFLAGS)            \
    -fno-exceptions               \
    -fno-rtti                     \
    $(NULL)

LDFLAGS                        += \
    $(COMMONCFLAGS)               \
    $(target_LDFLAGS)             \
    -nostartfiles                 \
    -specs=nano.specs             \
    -specs=nosys.specs            \
    -Wl,--gc-sections             \
    $(NULL)

ECHO                            := @echo
MAKE                            := make
MKDIR_P                         := mkdir -p
LN_S                            := ln -s
RM_F                            := rm -f

INSTALL                         := /usr/bin/install
INSTALLFLAGS                    := -p

BuildPath                       = build
TopBuildDir                     = $(BuildPath)
AbsTopBuildDir                  = $(PWD)/$(TopBuildDir)

ResultPath                      = output
TopResultDir                    = $(ResultPath)
AbsTopResultDir                 = $(PWD)/$(TopResultDir)

TargetTuple                     = efr32mg13

ARCHS                           = cortex-m4

TopTargetLibDir                 = $(TopResultDir)/$(TargetTuple)/lib

ifndef BuildJobs
BuildJobs := $(shell getconf _NPROCESSORS_ONLN)
endif
JOBSFLAG := -j$(BuildJobs)

#
# configure-arch <arch>
#
# Configure OpenThread for the specified architecture.
#
#   arch - The architecture to configure.
#
define configure-arch
$(ECHO) "  CONFIG   $(TargetTuple)..."
(cd $(BuildPath)/$(TargetTuple) && $(AbsTopSourceDir)/configure \
INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
CPP="$(CPP)" CC="$(CC)" CXX="$(CXX)" OBJC="$(OBJC)" OBJCXX="$(OBJCXX)" AR="$(AR)" RANLIB="$(RANLIB)" NM="$(NM)" STRIP="$(STRIP)" CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" CXXFLAGS="$(CXXFLAGS)" LDFLAGS="$(LDFLAGS)" \
--host=arm-none-eabi \
--prefix=/ \
--exec-prefix=/$(TargetTuple) \
$(configure_OPTIONS))
endef # configure-arch

#
# build-arch <arch>
#
# Build the OpenThread intermediate build products for the specified
# architecture.
#
#   arch - The architecture to build.
#
define build-arch
$(ECHO) "  BUILD    $(TargetTuple)"
$(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(TargetTuple) --no-print-directory \
all
endef # build-arch

#
# stage-arch <arch>
#
# Stage (install) the OpenThread final build products for the specified
# architecture.
#
#   arch - The architecture to stage.
#
define stage-arch
$(ECHO) "  STAGE    $(TargetTuple)"
$(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(TargetTuple) --no-print-directory \
DESTDIR=$(AbsTopResultDir) \
install
endef # stage-arch

#
# ARCH_template <arch>
#
# Define macros, targets and rules to configure, build, and stage the
# OpenThread for a single architecture.
#
#   arch - The architecture to instantiate the template for.
#
define ARCH_template
CONFIGURE_TARGETS += configure-$(1)
BUILD_TARGETS     += do-build-$(1)
STAGE_TARGETS     += stage-$(1)
BUILD_DIRS        += $(BuildPath)/$(TargetTuple)
DIRECTORIES       += $(BuildPath)/$(TargetTuple)

configure-$(1): target_CPPFLAGS=$($(1)_target_CPPFLAGS)
configure-$(1): target_CFLAGS=$($(1)_target_CFLAGS)
configure-$(1): target_CXXFLAGS=$($(1)_target_CXXFLAGS)
configure-$(1): target_LDFLAGS=$($(1)_target_LDFLAGS)

configure-$(1): $(BuildPath)/$(TargetTuple)/config.status

$(BuildPath)/$(TargetTuple)/config.status: | $(BuildPath)/$(TargetTuple)
	$$(call configure-arch,$(1))

do-build-$(1): configure-$(1)

do-build-$(1):
	+$$(call build-arch,$(1))

stage-$(1): do-build-$(1)

stage-$(1): | $(TopResultDir)
	$$(call stage-arch,$(1))

$(1): stage-$(1)
endef # ARCH_template

.DEFAULT_GOAL := all

all: stage

#
# cortex-m4
#

cortex-m4_target_ABI                  = cortex-m4
cortex-m4_target_CPPFLAGS             = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb
cortex-m4_target_CFLAGS               = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb
cortex-m4_target_CXXFLAGS             = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb
cortex-m4_target_LDFLAGS              = -mcpu=cortex-m4 -mfloat-abi=soft -mthumb

# Instantiate an architecture-specific build template for each target
# architecture.

$(foreach arch,$(ARCHS),$(eval $(call ARCH_template,$(arch))))

#
# Common / Finalization
#

configure: $(CONFIGURE_TARGETS)

build: $(BUILD_TARGETS)

stage: $(STAGE_TARGETS)

DIRECTORIES     = $(TopResultDir) $(TopResultDir)/$(TargetTuple)/lib $(BUILD_DIRS)

CLEAN_DIRS      = $(TopResultDir) $(BUILD_DIRS)

all: stage

$(DIRECTORIES):
	$(ECHO) "  MKDIR    $@"
	@$(MKDIR_P) "$@"

clean:
	$(ECHO) "  CLEAN"
	@$(RM_F) -r $(CLEAN_DIRS)

help:
	$(ECHO) "Simply type 'make -f $(firstword $(MAKEFILE_LIST))' to build OpenThread for the following "
	$(ECHO) "architectures: "
	$(ECHO) ""
	$(ECHO) "    $(ARCHS)"
	$(ECHO) ""
	$(ECHO) "To build only a particular architecture, specify: "
	$(ECHO) ""
	$(ECHO) "    make -f $(firstword $(MAKEFILE_LIST)) <architecture>"
	$(ECHO) ""