#!/usr/bin/env python3
#
#  Copyright (c) 2016, The OpenThread Authors.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. Neither the name of the copyright holder nor the
#     names of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.
#

import unittest

import mle
import network_layer
import thread_cert
from pktverify.consts import MLE_ADVERTISEMENT, MLE_PARENT_REQUEST, MLE_CHILD_ID_REQUEST, ADDR_SOL_URI, MODE_TLV, TIMEOUT_TLV, CHALLENGE_TLV, RESPONSE_TLV, LINK_LAYER_FRAME_COUNTER_TLV, ROUTE64_TLV, ADDRESS16_TLV, LEADER_DATA_TLV, NETWORK_DATA_TLV, TLV_REQUEST_TLV, SCAN_MASK_TLV, VERSION_TLV, ADDRESS_REGISTRATION_TLV, NL_MAC_EXTENDED_ADDRESS_TLV, NL_STATUS_TLV, NL_RLOC16_TLV
from pktverify.packet_verifier import PacketVerifier

LEADER = 1
ROUTER1 = 2
ROUTER2 = 3

# Test Purpose and Description:
# -----------------------------
# The purpose of this test case is to verify that after the removal of the
# Leader from the network, the DUT will first attempt to reattach to the
# original partition, then attach to a new partition and request its
# original short address.
#
# Test Topology:
# -------------
#        Leader              Router_2
#       /     \         ->     |
# Router_1  -   Router_2     Router_1[DUT]
#
# DUT Types:
# ----------
# Router


class Cert_5_1_03_RouterAddressReallocation(thread_cert.TestCase):
    USE_MESSAGE_FACTORY = False

    TOPOLOGY = {
        LEADER: {
            'name': 'LEADER',
            'mode': 'rdn',
            'allowlist': [ROUTER1, ROUTER2]
        },
        ROUTER1: {
            'name': 'ROUTER_1',
            'mode': 'rdn',
            'allowlist': [LEADER, ROUTER2]
        },
        ROUTER2: {
            'name': 'ROUTER_2',
            'mode': 'rdn',
            'allowlist': [LEADER, ROUTER1]
        },
    }

    def test(self):
        self.nodes[LEADER].start()
        self.simulator.go(5)
        self.assertEqual(self.nodes[LEADER].get_state(), 'leader')

        self.nodes[ROUTER1].start()
        self.simulator.go(5)
        self.assertEqual(self.nodes[ROUTER1].get_state(), 'router')

        self.nodes[ROUTER2].start()
        self.simulator.go(5)
        self.assertEqual(self.nodes[ROUTER2].get_state(), 'router')

        self.nodes[ROUTER2].set_network_id_timeout(110)
        self.nodes[LEADER].stop()
        self.simulator.go(140)

        self.assertEqual(self.nodes[ROUTER2].get_state(), 'leader')
        self.assertEqual(self.nodes[ROUTER1].get_state(), 'router')
        self.collect_rloc16s()

    def verify(self, pv):
        pkts = pv.pkts
        pv.summary.show()

        LEADER = pv.vars['LEADER']
        LEADER_RLOC16 = pv.vars['LEADER_RLOC16']
        ROUTER_1 = pv.vars['ROUTER_1']
        ROUTER_2 = pv.vars['ROUTER_2']
        ROUTER_2_RLOC16 = pv.vars['ROUTER_2_RLOC16']

        # Step 2: Verify topology is formed correctly.
        pv.verify_attached('ROUTER_1')
        _pkt_as = pkts.filter_wpan_src64(LEADER).\
            filter_coap_ack(ADDR_SOL_URI).\
            must_next()

        pv.verify_attached('ROUTER_2')
        _pkt_pt = pkts.filter_wpan_src64(ROUTER_2).\
                   filter_LLANMA().\
                   filter_mle_cmd(MLE_ADVERTISEMENT).\
                   must_next()

        # Step 5: Router_1 MUST attempt to reattach to its original partition
        #         by sending a MLE Parent Request with a hop limit of 255 to
        #         the All-Routers multicast address (FF02::2).
        #         The following TLVs MUST be present in the MLE Parent Request:
        #            - Challenge TLV
        #            - Mode TLV
        #            - Scan Mask TLV (MUST have E and R flags set)
        #            - Version TLV
        #         The DUT MUST make two separate attempts to reconnect to its
        #         original partition in this manner

        with pkts.save_index():
            for i in range(2):
                pkts.filter_wpan_src64(ROUTER_1).\
                    filter_LLARMA().\
                    filter_mle_cmd(MLE_PARENT_REQUEST).\
                    filter(lambda p: {
                                      CHALLENGE_TLV,
                                      MODE_TLV,
                                      SCAN_MASK_TLV,
                                      VERSION_TLV
                                      } <= set(p.mle.tlv.type) and\
                           p.ipv6.hlim == 255 and\
                           p.mle.tlv.scan_mask.r == 1 and\
                           p.mle.tlv.scan_mask.e == 1).\
                    must_next()

        # Step 6: Router_1 MUST attempt to attach to any other partition
        #         within range by sending a MLE Parent Request.
        #         The following TLVs MUST be present in the MLE Parent Request:
        #            - Challenge TLV
        #            - Mode TLV
        #            - Scan Mask TLV
        #            - Version TLV

        pkts.filter_wpan_src64(ROUTER_2).\
                   filter_mle_cmd(MLE_ADVERTISEMENT).\
                   filter_LLANMA().\
                   filter(lambda p:\
                               p.mle.tlv.leader_data.partition_id !=
                               _pkt_pt.mle.tlv.leader_data.partition_id).\
                   must_next()

        pkts.filter_wpan_src64(ROUTER_1).\
            filter_LLARMA().\
            filter_mle_cmd(MLE_PARENT_REQUEST).\
            filter(lambda p: {
                              CHALLENGE_TLV,
                              MODE_TLV,
                              SCAN_MASK_TLV,
                              VERSION_TLV
                              } <= set(p.mle.tlv.type) and\
                   p.mle.tlv.scan_mask.r == 1 and\
                   p.mle.tlv.scan_mask.e == 0 and\
                   p.ipv6.hlim == 255).\
            must_next()

        # Step 7: Router_1 sends a MLE Child ID Request to Router_2.
        #         The following TLVs MUST be present in the MLE Child ID Request:
        #             - Link-layer Frame Counter TLV
        #             - Mode TLV
        #             - Response TLV
        #             - Timeout TLV
        #             - TLV Request TLV
        #             - Version TLV
        #             - MLE Frame Counter TLV (optional)
        #         The following TLV MUST NOT be present in the MLE Child ID Request:
        #             - Address Registration TLV

        _pkt = pkts.filter_wpan_src64(ROUTER_1).\
            filter_wpan_dst64(ROUTER_2).\
            filter_mle_cmd(MLE_CHILD_ID_REQUEST).\
            filter(lambda p: {
                              LINK_LAYER_FRAME_COUNTER_TLV,
                              MODE_TLV,
                              RESPONSE_TLV,
                              TIMEOUT_TLV,
                              TLV_REQUEST_TLV,
                              VERSION_TLV
            } <= set(p.mle.tlv.type)).\
                   must_next()
        _pkt.must_not_verify(lambda p: (ADDRESS_REGISTRATION_TLV) in p.mle.tlv.type)

        # Step 8: Router_1 sends an Address Solicit Request.
        #         Ensure the Address Solicit Request is properly formatted:
        #         CoAP Request URI
        #             coap://<leader address>:MM/a/as
        #         CoAP Payload
        #             - MAC Extended Address TLV
        #             - Status TLV
        #             - RLOC16 TLV

        _pkt = pkts.filter_wpan_src64(ROUTER_1).\
            filter_wpan_dst16(ROUTER_2_RLOC16).\
            filter_coap_request(ADDR_SOL_URI).\
            filter(lambda p: {
                              NL_MAC_EXTENDED_ADDRESS_TLV,
                              NL_STATUS_TLV,
                              NL_RLOC16_TLV
                              } <= set(p.coap.tlv.type) and\
                   p.thread_address.tlv.rloc16 ==
                   _pkt_as.thread_address.tlv.rloc16).\
           must_next()

        # Step 9: Router_2 automatically sends an Address Solicit Response.

        pkts.filter_wpan_src64(ROUTER_2).\
            filter_wpan_dst16(_pkt.wpan.src16).\
            filter_coap_ack(ADDR_SOL_URI).\
            filter(lambda p: p.thread_address.tlv.rloc16 ==
                   _pkt_as.thread_address.tlv.rloc16 and\
                   p.thread_address.tlv.status == 0).\
            must_next()


if __name__ == '__main__':
    unittest.main()