examples/platforms/simulation/openthread-core-simulation-config.h - third_party/openthread - Git at Google

 /*
  *  Copyright (c) 2017, The OpenThread Authors.
  *  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions are met:
  *  1. Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *  2. Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in the
  *     documentation and/or other materials provided with the distribution.
  *  3. Neither the name of the copyright holder nor the
  *     names of its contributors may be used to endorse or promote products
  *     derived from this software without specific prior written permission.
  *
  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  *  POSSIBILITY OF SUCH DAMAGE.
  */

 /**
  * @file
  *   This file includes simulation compile-time configuration constants
  *   for OpenThread.
  */

 #ifndef OPENTHREAD_CORE_SIMULATION_CONFIG_H_
 #define OPENTHREAD_CORE_SIMULATION_CONFIG_H_

 #ifndef OPENTHREAD_RADIO
 #define OPENTHREAD_RADIO 0
 #endif

 /**
  * @def OPENTHREAD_CONFIG_PLATFORM_INFO
  *
  * The platform-specific string to insert into the OpenThread version string.
  *
  */
 #define OPENTHREAD_CONFIG_PLATFORM_INFO "SIMULATION"

 /**
  * @def OPENTHREAD_CONFIG_LOG_OUTPUT
  *
  * Specify where the log output should go.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_OUTPUT /* allow command line override */
 #define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
 #endif

 /**
  * @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE
  *
  * Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread.
  *
  */
 #ifndef OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE /* allows command line override */
 #define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1
 #endif

 #if OPENTHREAD_RADIO
 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
  *
  * Define to 1 if you want to enable software ACK timeout logic.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE
  *
  * Define to 1 if you want to enable software energy scanning logic.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
  *
  * Define to 1 if you want to enable software retransmission logic.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
  *
  * Define to 1 if you want to enable software CSMA-CA backoff logic.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
  *
  * Define to 1 if you want to enable software transmission security logic.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE
  *
  * Define to 1 to enable software transmission target time logic.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE 1
 #endif
 #endif // OPENTHREAD_RADIO

 /**
  * @def OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE
  *
  * Define to 1 if you want to support microsecond timer in platform.
  *
  */
 #define OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE
  *
  * Define to 1 to enable otPlatFlash* APIs to support non-volatile storage.
  *
  * When defined to 1, the platform MUST implement the otPlatFlash* APIs instead of the otPlatSettings* APIs.
  *
  */
 #define OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE 1

 /**
  * @def CLI_COAP_SECURE_USE_COAP_DEFAULT_HANDLER
  *
  * Define to 1 to use DefaultHandler for unhandled requests
  *
  */
 #define CLI_COAP_SECURE_USE_COAP_DEFAULT_HANDLER 1

 /**
  * @def OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE
  *
  * Define to 1 if you want to enable radio coexistence implemented in platform.
  *
  */
 #ifndef OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE
 #define OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE 1
 #endif

 #ifndef OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE
 #define OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_PLATFORM
  *
  * Define to enable platform region logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_PLATFORM
 #define OPENTHREAD_CONFIG_LOG_PLATFORM 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_CLI_MAX_LINE_LENGTH
  *
  * The maximum size of the CLI line in bytes.
  *
  */
 #ifndef OPENTHREAD_CONFIG_CLI_MAX_LINE_LENGTH
 #define OPENTHREAD_CONFIG_CLI_MAX_LINE_LENGTH 640
 #endif

 /**
  * @def OPENTHREAD_CONFIG_CLI_UART_RX_BUFFER_SIZE
  *
  * The size of CLI UART RX buffer in bytes.
  *
  */
 #ifndef OPENTHREAD_CONFIG_CLI_UART_RX_BUFFER_SIZE
 #define OPENTHREAD_CONFIG_CLI_UART_RX_BUFFER_SIZE 640
 #endif

 /**
  * @def OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
  *
  * The maximum number of children.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
 #define OPENTHREAD_CONFIG_MLE_MAX_CHILDREN 128
 #endif

 /**
  * @def OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
  *
  * Define as 1 for a child to inform its previous parent when it attaches to a new parent.
  *
  * If this feature is enabled, when a device attaches to a new parent, it will send an IP message (with empty payload
  * and mesh-local IP address as the source address) to its previous parent.
  *
  */
 #ifndef OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
 #define OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_UPTIME_ENABLE
  *
  * Define to 1 to enable tracking the uptime of OpenThread instance.
  *
  */
 #ifndef OPENTHREAD_CONFIG_UPTIME_ENABLE
 #define OPENTHREAD_CONFIG_UPTIME_ENABLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME
  *
  * Define as 1 to prepend the current uptime to all log messages.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME
 #define OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES
  *
  * Specifies number of service entries in the SRP client service pool.
  *
  * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled.
  *
  */
 #ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES
 #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES 20
 #endif

 #endif // OPENTHREAD_CORE_SIMULATION_CONFIG_H_
	/*
	* Copyright (c) 2017, The OpenThread Authors.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. Neither the name of the copyright holder nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	/**
	* @file
	* This file includes simulation compile-time configuration constants
	* for OpenThread.
	*/

	#ifndef OPENTHREAD_CORE_SIMULATION_CONFIG_H_
	#define OPENTHREAD_CORE_SIMULATION_CONFIG_H_

	#ifndef OPENTHREAD_RADIO
	#define OPENTHREAD_RADIO 0
	#endif

	/**
	* @def OPENTHREAD_CONFIG_PLATFORM_INFO
	*
	* The platform-specific string to insert into the OpenThread version string.
	*
	*/
	#define OPENTHREAD_CONFIG_PLATFORM_INFO "SIMULATION"

	/**
	* @def OPENTHREAD_CONFIG_LOG_OUTPUT
	*
	* Specify where the log output should go.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_OUTPUT /* allow command line override */
	#define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
	#endif

	/**
	* @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE
	*
	* Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE /* allows command line override */
	#define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1
	#endif

	#if OPENTHREAD_RADIO
	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
	*
	* Define to 1 if you want to enable software ACK timeout logic.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE
	*
	* Define to 1 if you want to enable software energy scanning logic.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_ENERGY_SCAN_ENABLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
	*
	* Define to 1 if you want to enable software retransmission logic.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
	*
	* Define to 1 if you want to enable software CSMA-CA backoff logic.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
	*
	* Define to 1 if you want to enable software transmission security logic.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE
	*
	* Define to 1 to enable software transmission target time logic.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE 1
	#endif
	#endif // OPENTHREAD_RADIO

	/**
	* @def OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE
	*
	* Define to 1 if you want to support microsecond timer in platform.
	*
	*/
	#define OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE
	*
	* Define to 1 to enable otPlatFlash* APIs to support non-volatile storage.
	*
	* When defined to 1, the platform MUST implement the otPlatFlash* APIs instead of the otPlatSettings* APIs.
	*
	*/
	#define OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE 1

	/**
	* @def CLI_COAP_SECURE_USE_COAP_DEFAULT_HANDLER
	*
	* Define to 1 to use DefaultHandler for unhandled requests
	*
	*/
	#define CLI_COAP_SECURE_USE_COAP_DEFAULT_HANDLER 1

	/**
	* @def OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE
	*
	* Define to 1 if you want to enable radio coexistence implemented in platform.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE
	#define OPENTHREAD_CONFIG_PLATFORM_RADIO_COEX_ENABLE 1
	#endif

	#ifndef OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE
	#define OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_PLATFORM
	*
	* Define to enable platform region logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_PLATFORM
	#define OPENTHREAD_CONFIG_LOG_PLATFORM 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_CLI_MAX_LINE_LENGTH
	*
	* The maximum size of the CLI line in bytes.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_CLI_MAX_LINE_LENGTH
	#define OPENTHREAD_CONFIG_CLI_MAX_LINE_LENGTH 640
	#endif

	/**
	* @def OPENTHREAD_CONFIG_CLI_UART_RX_BUFFER_SIZE
	*
	* The size of CLI UART RX buffer in bytes.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_CLI_UART_RX_BUFFER_SIZE
	#define OPENTHREAD_CONFIG_CLI_UART_RX_BUFFER_SIZE 640
	#endif

	/**
	* @def OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
	*
	* The maximum number of children.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
	#define OPENTHREAD_CONFIG_MLE_MAX_CHILDREN 128
	#endif

	/**
	* @def OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
	*
	* Define as 1 for a child to inform its previous parent when it attaches to a new parent.
	*
	* If this feature is enabled, when a device attaches to a new parent, it will send an IP message (with empty payload
	* and mesh-local IP address as the source address) to its previous parent.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
	#define OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_UPTIME_ENABLE
	*
	* Define to 1 to enable tracking the uptime of OpenThread instance.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_UPTIME_ENABLE
	#define OPENTHREAD_CONFIG_UPTIME_ENABLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME
	*
	* Define as 1 to prepend the current uptime to all log messages.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME
	#define OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES
	*
	* Specifies number of service entries in the SRP client service pool.
	*
	* This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES
	#define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES 20
	#endif

	#endif // OPENTHREAD_CORE_SIMULATION_CONFIG_H_