| /* |
| * Copyright (c) 2016, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * @brief |
| * This file defines the OpenThread Network Data API. |
| */ |
| |
| #ifndef OPENTHREAD_NETDATA_H_ |
| #define OPENTHREAD_NETDATA_H_ |
| |
| #include <openthread/ip6.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * @addtogroup api-thread-general |
| * |
| * @{ |
| * |
| */ |
| |
| #define OT_NETWORK_DATA_ITERATOR_INIT 0 ///< Value to initialize `otNetworkDataIterator`. |
| |
| typedef uint32_t otNetworkDataIterator; ///< Used to iterate through Network Data information. |
| |
| /** |
| * This structure represents a Border Router configuration. |
| */ |
| typedef struct otBorderRouterConfig |
| { |
| otIp6Prefix mPrefix; ///< The IPv6 prefix. |
| signed int mPreference : 2; ///< A 2-bit signed int preference (`OT_ROUTE_PREFERENCE_*` values). |
| bool mPreferred : 1; ///< Whether prefix is preferred. |
| bool mSlaac : 1; ///< Whether prefix can be used for address auto-configuration (SLAAC). |
| bool mDhcp : 1; ///< Whether border router is DHCPv6 Agent. |
| bool mConfigure : 1; ///< Whether DHCPv6 Agent supplying other config data. |
| bool mDefaultRoute : 1; ///< Whether border router is a default router for prefix. |
| bool mOnMesh : 1; ///< Whether this prefix is considered on-mesh. |
| bool mStable : 1; ///< Whether this configuration is considered Stable Network Data. |
| bool mNdDns : 1; ///< Whether this border router can supply DNS information via ND. |
| bool mDp : 1; ///< Whether prefix is a Thread Domain Prefix (added since Thread 1.2). |
| uint16_t mRloc16; ///< The border router's RLOC16 (value ignored on config add). |
| } otBorderRouterConfig; |
| |
| /** |
| * This structure represents an External Route configuration. |
| * |
| */ |
| typedef struct otExternalRouteConfig |
| { |
| otIp6Prefix mPrefix; ///< The IPv6 prefix. |
| uint16_t mRloc16; ///< The border router's RLOC16 (value ignored on config add). |
| signed int mPreference : 2; ///< A 2-bit signed int preference (`OT_ROUTE_PREFERENCE_*` values). |
| bool mNat64 : 1; ///< Whether this is a NAT64 prefix. |
| bool mStable : 1; ///< Whether this configuration is considered Stable Network Data. |
| bool mNextHopIsThisDevice : 1; ///< Whether the next hop is this device (value ignored on config add). |
| } otExternalRouteConfig; |
| |
| /** |
| * Defines valid values for `mPreference` in `otExternalRouteConfig` and `otBorderRouterConfig`. |
| * |
| */ |
| typedef enum otRoutePreference |
| { |
| OT_ROUTE_PREFERENCE_LOW = -1, ///< Low route preference. |
| OT_ROUTE_PREFERENCE_MED = 0, ///< Medium route preference. |
| OT_ROUTE_PREFERENCE_HIGH = 1, ///< High route preference. |
| } otRoutePreference; |
| |
| #define OT_SERVICE_DATA_MAX_SIZE 252 ///< Max size of Service Data in bytes. |
| #define OT_SERVER_DATA_MAX_SIZE 248 ///< Max size of Server Data in bytes. Theoretical limit, practically much lower. |
| |
| /** |
| * This structure represents a Server configuration. |
| * |
| */ |
| typedef struct otServerConfig |
| { |
| bool mStable : 1; ///< Whether this config is considered Stable Network Data. |
| uint8_t mServerDataLength; ///< Length of server data. |
| uint8_t mServerData[OT_SERVER_DATA_MAX_SIZE]; ///< Server data bytes. |
| uint16_t mRloc16; ///< The Server RLOC16. |
| } otServerConfig; |
| |
| /** |
| * This structure represents a Service configuration. |
| * |
| */ |
| typedef struct otServiceConfig |
| { |
| uint8_t mServiceId; ///< Service ID (when iterating over the Network Data). |
| uint32_t mEnterpriseNumber; ///< IANA Enterprise Number. |
| uint8_t mServiceDataLength; ///< Length of service data. |
| uint8_t mServiceData[OT_SERVICE_DATA_MAX_SIZE]; ///< Service data bytes. |
| otServerConfig mServerConfig; ///< The Server configuration. |
| } otServiceConfig; |
| |
| /** |
| * This method provides a full or stable copy of the Partition's Thread Network Data. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * @param[in] aStable TRUE when copying the stable version, FALSE when copying the full version. |
| * @param[out] aData A pointer to the data buffer. |
| * @param[in,out] aDataLength On entry, size of the data buffer pointed to by @p aData. |
| * On exit, number of copied bytes. |
| * |
| */ |
| otError otNetDataGet(otInstance *aInstance, bool aStable, uint8_t *aData, uint8_t *aDataLength); |
| |
| /** |
| * This function gets the next On Mesh Prefix in the partition's Network Data. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * @param[in,out] aIterator A pointer to the Network Data iterator context. To get the first on-mesh entry |
| it should be set to OT_NETWORK_DATA_ITERATOR_INIT. |
| * @param[out] aConfig A pointer to where the On Mesh Prefix information will be placed. |
| * |
| * @retval OT_ERROR_NONE Successfully found the next On Mesh prefix. |
| * @retval OT_ERROR_NOT_FOUND No subsequent On Mesh prefix exists in the Thread Network Data. |
| * |
| */ |
| otError otNetDataGetNextOnMeshPrefix(otInstance * aInstance, |
| otNetworkDataIterator *aIterator, |
| otBorderRouterConfig * aConfig); |
| |
| /** |
| * This function gets the next external route in the partition's Network Data. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * @param[in,out] aIterator A pointer to the Network Data iterator context. To get the first external route entry |
| it should be set to OT_NETWORK_DATA_ITERATOR_INIT. |
| * @param[out] aConfig A pointer to where the External Route information will be placed. |
| * |
| * @retval OT_ERROR_NONE Successfully found the next External Route. |
| * @retval OT_ERROR_NOT_FOUND No subsequent external route entry exists in the Thread Network Data. |
| * |
| */ |
| otError otNetDataGetNextRoute(otInstance *aInstance, otNetworkDataIterator *aIterator, otExternalRouteConfig *aConfig); |
| |
| /** |
| * This function gets the next service in the partition's Network Data. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * @param[in,out] aIterator A pointer to the Network Data iterator context. To get the first service entry |
| it should be set to OT_NETWORK_DATA_ITERATOR_INIT. |
| * @param[out] aConfig A pointer to where the service information will be placed. |
| * |
| * @retval OT_ERROR_NONE Successfully found the next service. |
| * @retval OT_ERROR_NOT_FOUND No subsequent service exists in the partition's Network Data. |
| * |
| */ |
| otError otNetDataGetNextService(otInstance *aInstance, otNetworkDataIterator *aIterator, otServiceConfig *aConfig); |
| |
| /** |
| * Get the Network Data Version. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * |
| * @returns The Network Data Version. |
| * |
| */ |
| uint8_t otNetDataGetVersion(otInstance *aInstance); |
| |
| /** |
| * Get the Stable Network Data Version. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * |
| * @returns The Stable Network Data Version. |
| * |
| */ |
| uint8_t otNetDataGetStableVersion(otInstance *aInstance); |
| |
| /** |
| * Check if the steering data includes a Joiner. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * @param[in] aEui64 A pointer to the Joiner's IEEE EUI-64. |
| * |
| * @retval OT_ERROR_NONE @p aEui64 is included in the steering data. |
| * @retval OT_ERROR_INVALID_STATE No steering data present. |
| * @retval OT_ERROR_NOT_FOUND @p aEui64 is not included in the steering data. |
| * |
| */ |
| otError otNetDataSteeringDataCheckJoiner(otInstance *aInstance, const otExtAddress *aEui64); |
| |
| // Forward declaration |
| struct otJoinerDiscerner; |
| |
| /** |
| * Check if the steering data includes a Joiner with a given discerner value. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * @param[in] aDiscerner A pointer to the Joiner Discerner. |
| * |
| * @retval OT_ERROR_NONE @p aDiscerner is included in the steering data. |
| * @retval OT_ERROR_INVALID_STATE No steering data present. |
| * @retval OT_ERROR_NOT_FOUND @p aDiscerner is not included in the steering data. |
| * |
| */ |
| otError otNetDataSteeringDataCheckJoinerWithDiscerner(otInstance * aInstance, |
| const struct otJoinerDiscerner *aDiscerner); |
| |
| /** |
| * This function checks whether a given Prefix can act as a valid OMR prefix and also the Leader's Network Data contains |
| * this prefix. |
| * |
| * @param[in] aInstance A pointer to an OpenThread instance. |
| * @param[in] aPrefix A pointer to the IPv6 prefix. |
| * |
| * @returns Whether @p aPrefix is a valid OMR prefix and Leader's Network Data contains the OMR prefix @p aPrefix. |
| * |
| * @note This API is only available when `OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE` is used. |
| * |
| */ |
| bool otNetDataContainsOmrPrefix(otInstance *aInstance, const otIp6Prefix *aPrefix); |
| |
| /** |
| * @} |
| * |
| */ |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif |
| |
| #endif // OPENTHREAD_NETDATA_H_ |