src/net/udp.rs - third_party/mio - Git at Google

 //! Primitives for working with UDP
 //!
 //! The types provided in this module are non-blocking by default and are
 //! designed to be portable across all supported Mio platforms. As long as the
 //! [portability guidelines] are followed, the behavior should be identical no
 //! matter the target platform.
 //!
 /// [portability guidelines]: ../struct.Poll.html#portability

 use {io, sys, Ready, Poll, PollOpt, Token};
 use event::Evented;
 use poll::SelectorId;
 use std::fmt;
 use std::net::{self, Ipv4Addr, Ipv6Addr, SocketAddr};

 /// A User Datagram Protocol socket.
 ///
 /// This is an implementation of a bound UDP socket. This supports both IPv4 and
 /// IPv6 addresses, and there is no corresponding notion of a server because UDP
 /// is a datagram protocol.
 ///
 /// # Examples
 ///
 /// ```
 /// # use std::error::Error;
 /// #
 /// # fn try_main() -> Result<(), Box<Error>> {
 /// // An Echo program:
 /// // SENDER -> sends a message.
 /// // ECHOER -> listens and prints the message received.
 ///
 /// use mio::net::UdpSocket;
 /// use mio::{Events, Ready, Poll, PollOpt, Token};
 /// use std::time::Duration;
 ///
 /// const SENDER: Token = Token(0);
 /// const ECHOER: Token = Token(1);
 ///
 /// // This operation will fail if the address is in use, so we select different ports for each
 /// // socket.
 /// let sender_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
 /// let echoer_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
 ///
 /// // If we do not use connect here, SENDER and ECHOER would need to call send_to and recv_from
 /// // respectively.
 /// sender_socket.connect(echoer_socket.local_addr().unwrap())?;
 ///
 /// // We need a Poll to check if SENDER is ready to be written into, and if ECHOER is ready to be
 /// // read from.
 /// let poll = Poll::new()?;
 ///
 /// // We register our sockets here so that we can check if they are ready to be written/read.
 /// poll.register(&sender_socket, SENDER, Ready::writable(), PollOpt::edge())?;
 /// poll.register(&echoer_socket, ECHOER, Ready::readable(), PollOpt::edge())?;
 ///
 /// let msg_to_send = [9; 9];
 /// let mut buffer = [0; 9];
 ///
 /// let mut events = Events::with_capacity(128);
 /// loop {
 ///     poll.poll(&mut events, Some(Duration::from_millis(100)))?;
 ///     for event in events.iter() {
 ///         match event.token() {
 ///             // Our SENDER is ready to be written into.
 ///             SENDER => {
 ///                 let bytes_sent = sender_socket.send(&msg_to_send)?;
 ///                 assert_eq!(bytes_sent, 9);
 ///                 println!("sent {:?} -> {:?} bytes", msg_to_send, bytes_sent);
 ///             },
 ///             // Our ECHOER is ready to be read from.
 ///             ECHOER => {
 ///                 let num_recv = echoer_socket.recv(&mut buffer)?;
 ///                 println!("echo {:?} -> {:?}", buffer, num_recv);
 ///                 buffer = [0; 9];
 ///                 # return Ok(());
 ///             }
 ///             _ => unreachable!()
 ///         }
 ///     }
 /// }
 /// #
 /// #   Ok(())
 /// # }
 /// #
 /// # fn main() {
 /// #   try_main().unwrap();
 /// # }
 /// ```
 pub struct UdpSocket {
     sys: sys::UdpSocket,
     selector_id: SelectorId,
 }

 impl UdpSocket {
     /// Creates a UDP socket from the given address.
     ///
     /// # Examples
     ///
     /// ```
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// // We must bind it to an open address.
     /// let socket = match UdpSocket::bind(&"127.0.0.1:0".parse()?) {
     ///     Ok(new_socket) => new_socket,
     ///     Err(fail) => {
     ///         // We panic! here, but you could try to bind it again on another address.
     ///         panic!("Failed to bind socket. {:?}", fail);
     ///     }
     /// };
     ///
     /// // Our socket was created, but we should not use it before checking it's readiness.
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn bind(addr: &SocketAddr) -> io::Result<UdpSocket> {
         let socket = net::UdpSocket::bind(addr)?;
         UdpSocket::from_socket(socket)
     }

     /// Creates a new mio-wrapped socket from an underlying and bound std
     /// socket.
     ///
     /// This function requires that `socket` has previously been bound to an
     /// address to work correctly, and returns an I/O object which can be used
     /// with mio to send/receive UDP messages.
     ///
     /// This can be used in conjunction with net2's `UdpBuilder` interface to
     /// configure a socket before it's handed off to mio, such as setting
     /// options like `reuse_address` or binding to multiple addresses.
     pub fn from_socket(socket: net::UdpSocket) -> io::Result<UdpSocket> {
         Ok(UdpSocket {
             sys: sys::UdpSocket::new(socket)?,
             selector_id: SelectorId::new(),
         })
     }

     /// Returns the socket address that this socket was created from.
     ///
     /// # Examples
     ///
     // This assertion is almost, but not quite, universal.  It fails on
     // shared-IP FreeBSD jails.  It's hard for mio to know whether we're jailed,
     // so simply disable the test on FreeBSD.
     #[cfg_attr(not(target_os = "freebsd"), doc = " ```")]
     #[cfg_attr(target_os = "freebsd", doc = " ```no_run")]
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// let addr = "127.0.0.1:0".parse()?;
     /// let socket = UdpSocket::bind(&addr)?;
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn local_addr(&self) -> io::Result<SocketAddr> {
         self.sys.local_addr()
     }

     /// Creates a new independently owned handle to the underlying socket.
     ///
     /// The returned `UdpSocket` is a reference to the same socket that this
     /// object references. Both handles will read and write the same port, and
     /// options set on one socket will be propagated to the other.
     ///
     /// # Examples
     ///
     /// ```
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// // We must bind it to an open address.
     /// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
     /// let cloned_socket = socket.try_clone()?;
     ///
     /// assert_eq!(socket.local_addr()?, cloned_socket.local_addr()?);
     ///
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn try_clone(&self) -> io::Result<UdpSocket> {
         self.sys.try_clone()
             .map(|s| {
                 UdpSocket {
                     sys: s,
                     selector_id: self.selector_id.clone(),
                 }
             })
     }

     /// Sends data on the socket to the given address. On success, returns the
     /// number of bytes written.
     ///
     /// Address type can be any implementor of `ToSocketAddrs` trait. See its
     /// documentation for concrete examples.
     ///
     /// # Examples
     ///
     /// ```no_run
     /// # use std::error::Error;
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
     ///
     /// // We must check if the socket is writable before calling send_to,
     /// // or we could run into a WouldBlock error.
     ///
     /// let bytes_sent = socket.send_to(&[9; 9], &"127.0.0.1:11100".parse()?)?;
     /// assert_eq!(bytes_sent, 9);
     /// #
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn send_to(&self, buf: &[u8], target: &SocketAddr) -> io::Result<usize> {
         self.sys.send_to(buf, target)
     }

     /// Receives data from the socket. On success, returns the number of bytes
     /// read and the address from whence the data came.
     ///
     /// # Examples
     ///
     /// ```no_run
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
     ///
     /// // We must check if the socket is readable before calling recv_from,
     /// // or we could run into a WouldBlock error.
     ///
     /// let mut buf = [0; 9];
     /// let (num_recv, from_addr) = socket.recv_from(&mut buf)?;
     /// println!("Received {:?} -> {:?} bytes from {:?}", buf, num_recv, from_addr);
     /// #
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn recv_from(&self, buf: &mut [u8]) -> io::Result<(usize, SocketAddr)> {
         self.sys.recv_from(buf)
     }

     /// Sends data on the socket to the address previously bound via connect(). On success,
     /// returns the number of bytes written.
     pub fn send(&self, buf: &[u8]) -> io::Result<usize> {
         self.sys.send(buf)
     }

     /// Receives data from the socket previously bound with connect(). On success, returns
     /// the number of bytes read and the address from whence the data came.
     pub fn recv(&self, buf: &mut [u8]) -> io::Result<usize> {
         self.sys.recv(buf)
     }

     /// Connects the UDP socket setting the default destination for `send()`
     /// and limiting packets that are read via `recv` from the address specified
     /// in `addr`.
     pub fn connect(&self, addr: SocketAddr) -> io::Result<()> {
         self.sys.connect(addr)
     }

     /// Sets the value of the `SO_BROADCAST` option for this socket.
     ///
     /// When enabled, this socket is allowed to send packets to a broadcast
     /// address.
     ///
     /// # Examples
     ///
     /// ```
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// let broadcast_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
     /// if broadcast_socket.broadcast()? == false {
     ///     broadcast_socket.set_broadcast(true)?;
     /// }
     ///
     /// assert_eq!(broadcast_socket.broadcast()?, true);
     /// #
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn set_broadcast(&self, on: bool) -> io::Result<()> {
         self.sys.set_broadcast(on)
     }

     /// Gets the value of the `SO_BROADCAST` option for this socket.
     ///
     /// For more information about this option, see
     /// [`set_broadcast`][link].
     ///
     /// [link]: #method.set_broadcast
     ///
     /// # Examples
     ///
     /// ```
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// let broadcast_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
     /// assert_eq!(broadcast_socket.broadcast()?, false);
     /// #
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn broadcast(&self) -> io::Result<bool> {
         self.sys.broadcast()
     }

     /// Sets the value of the `IP_MULTICAST_LOOP` option for this socket.
     ///
     /// If enabled, multicast packets will be looped back to the local socket.
     /// Note that this may not have any affect on IPv6 sockets.
     pub fn set_multicast_loop_v4(&self, on: bool) -> io::Result<()> {
         self.sys.set_multicast_loop_v4(on)
     }

     /// Gets the value of the `IP_MULTICAST_LOOP` option for this socket.
     ///
     /// For more information about this option, see
     /// [`set_multicast_loop_v4`][link].
     ///
     /// [link]: #method.set_multicast_loop_v4
     pub fn multicast_loop_v4(&self) -> io::Result<bool> {
         self.sys.multicast_loop_v4()
     }

     /// Sets the value of the `IP_MULTICAST_TTL` option for this socket.
     ///
     /// Indicates the time-to-live value of outgoing multicast packets for
     /// this socket. The default value is 1 which means that multicast packets
     /// don't leave the local network unless explicitly requested.
     ///
     /// Note that this may not have any affect on IPv6 sockets.
     pub fn set_multicast_ttl_v4(&self, ttl: u32) -> io::Result<()> {
         self.sys.set_multicast_ttl_v4(ttl)
     }

     /// Gets the value of the `IP_MULTICAST_TTL` option for this socket.
     ///
     /// For more information about this option, see
     /// [`set_multicast_ttl_v4`][link].
     ///
     /// [link]: #method.set_multicast_ttl_v4
     pub fn multicast_ttl_v4(&self) -> io::Result<u32> {
         self.sys.multicast_ttl_v4()
     }

     /// Sets the value of the `IPV6_MULTICAST_LOOP` option for this socket.
     ///
     /// Controls whether this socket sees the multicast packets it sends itself.
     /// Note that this may not have any affect on IPv4 sockets.
     pub fn set_multicast_loop_v6(&self, on: bool) -> io::Result<()> {
         self.sys.set_multicast_loop_v6(on)
     }

     /// Gets the value of the `IPV6_MULTICAST_LOOP` option for this socket.
     ///
     /// For more information about this option, see
     /// [`set_multicast_loop_v6`][link].
     ///
     /// [link]: #method.set_multicast_loop_v6
     pub fn multicast_loop_v6(&self) -> io::Result<bool> {
         self.sys.multicast_loop_v6()
     }

     /// Sets the value for the `IP_TTL` option on this socket.
     ///
     /// This value sets the time-to-live field that is used in every packet sent
     /// from this socket.
     ///
     /// # Examples
     ///
     /// ```
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
     /// if socket.ttl()? < 255 {
     ///     socket.set_ttl(255)?;
     /// }
     ///
     /// assert_eq!(socket.ttl()?, 255);
     /// #
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn set_ttl(&self, ttl: u32) -> io::Result<()> {
         self.sys.set_ttl(ttl)
     }

     /// Gets the value of the `IP_TTL` option for this socket.
     ///
     /// For more information about this option, see [`set_ttl`][link].
     ///
     /// [link]: #method.set_ttl
     ///
     /// # Examples
     ///
     /// ```
     /// # use std::error::Error;
     /// #
     /// # fn try_main() -> Result<(), Box<Error>> {
     /// use mio::net::UdpSocket;
     ///
     /// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
     /// socket.set_ttl(255)?;
     ///
     /// assert_eq!(socket.ttl()?, 255);
     /// #
     /// #    Ok(())
     /// # }
     /// #
     /// # fn main() {
     /// #   try_main().unwrap();
     /// # }
     /// ```
     pub fn ttl(&self) -> io::Result<u32> {
         self.sys.ttl()
     }

     /// Executes an operation of the `IP_ADD_MEMBERSHIP` type.
     ///
     /// This function specifies a new multicast group for this socket to join.
     /// The address must be a valid multicast address, and `interface` is the
     /// address of the local interface with which the system should join the
     /// multicast group. If it's equal to `INADDR_ANY` then an appropriate
     /// interface is chosen by the system.
     pub fn join_multicast_v4(&self,
                              multiaddr: &Ipv4Addr,
                              interface: &Ipv4Addr) -> io::Result<()> {
         self.sys.join_multicast_v4(multiaddr, interface)
     }

     /// Executes an operation of the `IPV6_ADD_MEMBERSHIP` type.
     ///
     /// This function specifies a new multicast group for this socket to join.
     /// The address must be a valid multicast address, and `interface` is the
     /// index of the interface to join/leave (or 0 to indicate any interface).
     pub fn join_multicast_v6(&self,
                              multiaddr: &Ipv6Addr,
                              interface: u32) -> io::Result<()> {
         self.sys.join_multicast_v6(multiaddr, interface)
     }

     /// Executes an operation of the `IP_DROP_MEMBERSHIP` type.
     ///
     /// For more information about this option, see
     /// [`join_multicast_v4`][link].
     ///
     /// [link]: #method.join_multicast_v4
     pub fn leave_multicast_v4(&self,
                               multiaddr: &Ipv4Addr,
                               interface: &Ipv4Addr) -> io::Result<()> {
         self.sys.leave_multicast_v4(multiaddr, interface)
     }

     /// Executes an operation of the `IPV6_DROP_MEMBERSHIP` type.
     ///
     /// For more information about this option, see
     /// [`join_multicast_v6`][link].
     ///
     /// [link]: #method.join_multicast_v6
     pub fn leave_multicast_v6(&self,
                               multiaddr: &Ipv6Addr,
                               interface: u32) -> io::Result<()> {
         self.sys.leave_multicast_v6(multiaddr, interface)
     }

     /// Sets the value for the `IPV6_V6ONLY` option on this socket.
     ///
     /// If this is set to `true` then the socket is restricted to sending and
     /// receiving IPv6 packets only. In this case two IPv4 and IPv6 applications
     /// can bind the same port at the same time.
     ///
     /// If this is set to `false` then the socket can be used to send and
     /// receive packets from an IPv4-mapped IPv6 address.
     pub fn set_only_v6(&self, only_v6: bool) -> io::Result<()> {
         self.sys.set_only_v6(only_v6)
     }

     /// Gets the value of the `IPV6_V6ONLY` option for this socket.
     ///
     /// For more information about this option, see [`set_only_v6`][link].
     ///
     /// [link]: #method.set_only_v6
     pub fn only_v6(&self) -> io::Result<bool> {
         self.sys.only_v6()
     }

     /// Get the value of the `SO_ERROR` option on this socket.
     ///
     /// This will retrieve the stored error in the underlying socket, clearing
     /// the field in the process. This can be useful for checking errors between
     /// calls.
     pub fn take_error(&self) -> io::Result<Option<io::Error>> {
         self.sys.take_error()
     }
 }

 impl Evented for UdpSocket {
     fn register(&self, poll: &Poll, token: Token, interest: Ready, opts: PollOpt) -> io::Result<()> {
         self.selector_id.associate_selector(poll)?;
         self.sys.register(poll, token, interest, opts)
     }

     fn reregister(&self, poll: &Poll, token: Token, interest: Ready, opts: PollOpt) -> io::Result<()> {
         self.sys.reregister(poll, token, interest, opts)
     }

     fn deregister(&self, poll: &Poll) -> io::Result<()> {
         self.sys.deregister(poll)
     }
 }

 impl fmt::Debug for UdpSocket {
     fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
         fmt::Debug::fmt(&self.sys, f)
     }
 }

 /*
  *
  * ===== UNIX ext =====
  *
  */

 #[cfg(all(unix, not(target_os = "fuchsia")))]
 use std::os::unix::io::{IntoRawFd, AsRawFd, FromRawFd, RawFd};

 #[cfg(all(unix, not(target_os = "fuchsia")))]
 impl IntoRawFd for UdpSocket {
     fn into_raw_fd(self) -> RawFd {
         self.sys.into_raw_fd()
     }
 }

 #[cfg(all(unix, not(target_os = "fuchsia")))]
 impl AsRawFd for UdpSocket {
     fn as_raw_fd(&self) -> RawFd {
         self.sys.as_raw_fd()
     }
 }

 #[cfg(all(unix, not(target_os = "fuchsia")))]
 impl FromRawFd for UdpSocket {
     unsafe fn from_raw_fd(fd: RawFd) -> UdpSocket {
         UdpSocket {
             sys: FromRawFd::from_raw_fd(fd),
             selector_id: SelectorId::new(),
         }
     }
 }
	//! Primitives for working with UDP
	//!
	//! The types provided in this module are non-blocking by default and are
	//! designed to be portable across all supported Mio platforms. As long as the
	//! [portability guidelines] are followed, the behavior should be identical no
	//! matter the target platform.
	//!
	/// [portability guidelines]: ../struct.Poll.html#portability

	use {io, sys, Ready, Poll, PollOpt, Token};
	use event::Evented;
	use poll::SelectorId;
	use std::fmt;
	use std::net::{self, Ipv4Addr, Ipv6Addr, SocketAddr};

	/// A User Datagram Protocol socket.
	///
	/// This is an implementation of a bound UDP socket. This supports both IPv4 and
	/// IPv6 addresses, and there is no corresponding notion of a server because UDP
	/// is a datagram protocol.
	///
	/// # Examples
	///
	/// ```
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// // An Echo program:
	/// // SENDER -> sends a message.
	/// // ECHOER -> listens and prints the message received.
	///
	/// use mio::net::UdpSocket;
	/// use mio::{Events, Ready, Poll, PollOpt, Token};
	/// use std::time::Duration;
	///
	/// const SENDER: Token = Token(0);
	/// const ECHOER: Token = Token(1);
	///
	/// // This operation will fail if the address is in use, so we select different ports for each
	/// // socket.
	/// let sender_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	/// let echoer_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	///
	/// // If we do not use connect here, SENDER and ECHOER would need to call send_to and recv_from
	/// // respectively.
	/// sender_socket.connect(echoer_socket.local_addr().unwrap())?;
	///
	/// // We need a Poll to check if SENDER is ready to be written into, and if ECHOER is ready to be
	/// // read from.
	/// let poll = Poll::new()?;
	///
	/// // We register our sockets here so that we can check if they are ready to be written/read.
	/// poll.register(&sender_socket, SENDER, Ready::writable(), PollOpt::edge())?;
	/// poll.register(&echoer_socket, ECHOER, Ready::readable(), PollOpt::edge())?;
	///
	/// let msg_to_send = [9; 9];
	/// let mut buffer = [0; 9];
	///
	/// let mut events = Events::with_capacity(128);
	/// loop {
	/// poll.poll(&mut events, Some(Duration::from_millis(100)))?;
	/// for event in events.iter() {
	/// match event.token() {
	/// // Our SENDER is ready to be written into.
	/// SENDER => {
	/// let bytes_sent = sender_socket.send(&msg_to_send)?;
	/// assert_eq!(bytes_sent, 9);
	/// println!("sent {:?} -> {:?} bytes", msg_to_send, bytes_sent);
	/// },
	/// // Our ECHOER is ready to be read from.
	/// ECHOER => {
	/// let num_recv = echoer_socket.recv(&mut buffer)?;
	/// println!("echo {:?} -> {:?}", buffer, num_recv);
	/// buffer = [0; 9];
	/// # return Ok(());
	/// }
	/// _ => unreachable!()
	/// }
	/// }
	/// }
	/// #
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub struct UdpSocket {
	sys: sys::UdpSocket,
	selector_id: SelectorId,
	}

	impl UdpSocket {
	/// Creates a UDP socket from the given address.
	///
	/// # Examples
	///
	/// ```
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// // We must bind it to an open address.
	/// let socket = match UdpSocket::bind(&"127.0.0.1:0".parse()?) {
	/// Ok(new_socket) => new_socket,
	/// Err(fail) => {
	/// // We panic! here, but you could try to bind it again on another address.
	/// panic!("Failed to bind socket. {:?}", fail);
	/// }
	/// };
	///
	/// // Our socket was created, but we should not use it before checking it's readiness.
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn bind(addr: &SocketAddr) -> io::Result<UdpSocket> {
	let socket = net::UdpSocket::bind(addr)?;
	UdpSocket::from_socket(socket)
	}

	/// Creates a new mio-wrapped socket from an underlying and bound std
	/// socket.
	///
	/// This function requires that `socket` has previously been bound to an
	/// address to work correctly, and returns an I/O object which can be used
	/// with mio to send/receive UDP messages.
	///
	/// This can be used in conjunction with net2's `UdpBuilder` interface to
	/// configure a socket before it's handed off to mio, such as setting
	/// options like `reuse_address` or binding to multiple addresses.
	pub fn from_socket(socket: net::UdpSocket) -> io::Result<UdpSocket> {
	Ok(UdpSocket {
	sys: sys::UdpSocket::new(socket)?,
	selector_id: SelectorId::new(),
	})
	}

	/// Returns the socket address that this socket was created from.
	///
	/// # Examples
	///
	// This assertion is almost, but not quite, universal. It fails on
	// shared-IP FreeBSD jails. It's hard for mio to know whether we're jailed,
	// so simply disable the test on FreeBSD.
	#[cfg_attr(not(target_os = "freebsd"), doc = " ```")]
	#[cfg_attr(target_os = "freebsd", doc = " ```no_run")]
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// let addr = "127.0.0.1:0".parse()?;
	/// let socket = UdpSocket::bind(&addr)?;
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn local_addr(&self) -> io::Result<SocketAddr> {
	self.sys.local_addr()
	}

	/// Creates a new independently owned handle to the underlying socket.
	///
	/// The returned `UdpSocket` is a reference to the same socket that this
	/// object references. Both handles will read and write the same port, and
	/// options set on one socket will be propagated to the other.
	///
	/// # Examples
	///
	/// ```
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// // We must bind it to an open address.
	/// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	/// let cloned_socket = socket.try_clone()?;
	///
	/// assert_eq!(socket.local_addr()?, cloned_socket.local_addr()?);
	///
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn try_clone(&self) -> io::Result<UdpSocket> {
	self.sys.try_clone()
	.map(\|s\| {
	UdpSocket {
	sys: s,
	selector_id: self.selector_id.clone(),
	}
	})
	}

	/// Sends data on the socket to the given address. On success, returns the
	/// number of bytes written.
	///
	/// Address type can be any implementor of `ToSocketAddrs` trait. See its
	/// documentation for concrete examples.
	///
	/// # Examples
	///
	/// ```no_run
	/// # use std::error::Error;
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	///
	/// // We must check if the socket is writable before calling send_to,
	/// // or we could run into a WouldBlock error.
	///
	/// let bytes_sent = socket.send_to(&[9; 9], &"127.0.0.1:11100".parse()?)?;
	/// assert_eq!(bytes_sent, 9);
	/// #
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn send_to(&self, buf: &[u8], target: &SocketAddr) -> io::Result<usize> {
	self.sys.send_to(buf, target)
	}

	/// Receives data from the socket. On success, returns the number of bytes
	/// read and the address from whence the data came.
	///
	/// # Examples
	///
	/// ```no_run
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	///
	/// // We must check if the socket is readable before calling recv_from,
	/// // or we could run into a WouldBlock error.
	///
	/// let mut buf = [0; 9];
	/// let (num_recv, from_addr) = socket.recv_from(&mut buf)?;
	/// println!("Received {:?} -> {:?} bytes from {:?}", buf, num_recv, from_addr);
	/// #
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn recv_from(&self, buf: &mut [u8]) -> io::Result<(usize, SocketAddr)> {
	self.sys.recv_from(buf)
	}

	/// Sends data on the socket to the address previously bound via connect(). On success,
	/// returns the number of bytes written.
	pub fn send(&self, buf: &[u8]) -> io::Result<usize> {
	self.sys.send(buf)
	}

	/// Receives data from the socket previously bound with connect(). On success, returns
	/// the number of bytes read and the address from whence the data came.
	pub fn recv(&self, buf: &mut [u8]) -> io::Result<usize> {
	self.sys.recv(buf)
	}

	/// Connects the UDP socket setting the default destination for `send()`
	/// and limiting packets that are read via `recv` from the address specified
	/// in `addr`.
	pub fn connect(&self, addr: SocketAddr) -> io::Result<()> {
	self.sys.connect(addr)
	}

	/// Sets the value of the `SO_BROADCAST` option for this socket.
	///
	/// When enabled, this socket is allowed to send packets to a broadcast
	/// address.
	///
	/// # Examples
	///
	/// ```
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// let broadcast_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	/// if broadcast_socket.broadcast()? == false {
	/// broadcast_socket.set_broadcast(true)?;
	/// }
	///
	/// assert_eq!(broadcast_socket.broadcast()?, true);
	/// #
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn set_broadcast(&self, on: bool) -> io::Result<()> {
	self.sys.set_broadcast(on)
	}

	/// Gets the value of the `SO_BROADCAST` option for this socket.
	///
	/// For more information about this option, see
	/// [`set_broadcast`][link].
	///
	/// [link]: #method.set_broadcast
	///
	/// # Examples
	///
	/// ```
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// let broadcast_socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	/// assert_eq!(broadcast_socket.broadcast()?, false);
	/// #
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn broadcast(&self) -> io::Result<bool> {
	self.sys.broadcast()
	}

	/// Sets the value of the `IP_MULTICAST_LOOP` option for this socket.
	///
	/// If enabled, multicast packets will be looped back to the local socket.
	/// Note that this may not have any affect on IPv6 sockets.
	pub fn set_multicast_loop_v4(&self, on: bool) -> io::Result<()> {
	self.sys.set_multicast_loop_v4(on)
	}

	/// Gets the value of the `IP_MULTICAST_LOOP` option for this socket.
	///
	/// For more information about this option, see
	/// [`set_multicast_loop_v4`][link].
	///
	/// [link]: #method.set_multicast_loop_v4
	pub fn multicast_loop_v4(&self) -> io::Result<bool> {
	self.sys.multicast_loop_v4()
	}

	/// Sets the value of the `IP_MULTICAST_TTL` option for this socket.
	///
	/// Indicates the time-to-live value of outgoing multicast packets for
	/// this socket. The default value is 1 which means that multicast packets
	/// don't leave the local network unless explicitly requested.
	///
	/// Note that this may not have any affect on IPv6 sockets.
	pub fn set_multicast_ttl_v4(&self, ttl: u32) -> io::Result<()> {
	self.sys.set_multicast_ttl_v4(ttl)
	}

	/// Gets the value of the `IP_MULTICAST_TTL` option for this socket.
	///
	/// For more information about this option, see
	/// [`set_multicast_ttl_v4`][link].
	///
	/// [link]: #method.set_multicast_ttl_v4
	pub fn multicast_ttl_v4(&self) -> io::Result<u32> {
	self.sys.multicast_ttl_v4()
	}

	/// Sets the value of the `IPV6_MULTICAST_LOOP` option for this socket.
	///
	/// Controls whether this socket sees the multicast packets it sends itself.
	/// Note that this may not have any affect on IPv4 sockets.
	pub fn set_multicast_loop_v6(&self, on: bool) -> io::Result<()> {
	self.sys.set_multicast_loop_v6(on)
	}

	/// Gets the value of the `IPV6_MULTICAST_LOOP` option for this socket.
	///
	/// For more information about this option, see
	/// [`set_multicast_loop_v6`][link].
	///
	/// [link]: #method.set_multicast_loop_v6
	pub fn multicast_loop_v6(&self) -> io::Result<bool> {
	self.sys.multicast_loop_v6()
	}

	/// Sets the value for the `IP_TTL` option on this socket.
	///
	/// This value sets the time-to-live field that is used in every packet sent
	/// from this socket.
	///
	/// # Examples
	///
	/// ```
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	/// if socket.ttl()? < 255 {
	/// socket.set_ttl(255)?;
	/// }
	///
	/// assert_eq!(socket.ttl()?, 255);
	/// #
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn set_ttl(&self, ttl: u32) -> io::Result<()> {
	self.sys.set_ttl(ttl)
	}

	/// Gets the value of the `IP_TTL` option for this socket.
	///
	/// For more information about this option, see [`set_ttl`][link].
	///
	/// [link]: #method.set_ttl
	///
	/// # Examples
	///
	/// ```
	/// # use std::error::Error;
	/// #
	/// # fn try_main() -> Result<(), Box<Error>> {
	/// use mio::net::UdpSocket;
	///
	/// let socket = UdpSocket::bind(&"127.0.0.1:0".parse()?)?;
	/// socket.set_ttl(255)?;
	///
	/// assert_eq!(socket.ttl()?, 255);
	/// #
	/// # Ok(())
	/// # }
	/// #
	/// # fn main() {
	/// # try_main().unwrap();
	/// # }
	/// ```
	pub fn ttl(&self) -> io::Result<u32> {
	self.sys.ttl()
	}

	/// Executes an operation of the `IP_ADD_MEMBERSHIP` type.
	///
	/// This function specifies a new multicast group for this socket to join.
	/// The address must be a valid multicast address, and `interface` is the
	/// address of the local interface with which the system should join the
	/// multicast group. If it's equal to `INADDR_ANY` then an appropriate
	/// interface is chosen by the system.
	pub fn join_multicast_v4(&self,
	multiaddr: &Ipv4Addr,
	interface: &Ipv4Addr) -> io::Result<()> {
	self.sys.join_multicast_v4(multiaddr, interface)
	}

	/// Executes an operation of the `IPV6_ADD_MEMBERSHIP` type.
	///
	/// This function specifies a new multicast group for this socket to join.
	/// The address must be a valid multicast address, and `interface` is the
	/// index of the interface to join/leave (or 0 to indicate any interface).
	pub fn join_multicast_v6(&self,
	multiaddr: &Ipv6Addr,
	interface: u32) -> io::Result<()> {
	self.sys.join_multicast_v6(multiaddr, interface)
	}

	/// Executes an operation of the `IP_DROP_MEMBERSHIP` type.
	///
	/// For more information about this option, see
	/// [`join_multicast_v4`][link].
	///
	/// [link]: #method.join_multicast_v4
	pub fn leave_multicast_v4(&self,
	multiaddr: &Ipv4Addr,
	interface: &Ipv4Addr) -> io::Result<()> {
	self.sys.leave_multicast_v4(multiaddr, interface)
	}

	/// Executes an operation of the `IPV6_DROP_MEMBERSHIP` type.
	///
	/// For more information about this option, see
	/// [`join_multicast_v6`][link].
	///
	/// [link]: #method.join_multicast_v6
	pub fn leave_multicast_v6(&self,
	multiaddr: &Ipv6Addr,
	interface: u32) -> io::Result<()> {
	self.sys.leave_multicast_v6(multiaddr, interface)
	}

	/// Sets the value for the `IPV6_V6ONLY` option on this socket.
	///
	/// If this is set to `true` then the socket is restricted to sending and
	/// receiving IPv6 packets only. In this case two IPv4 and IPv6 applications
	/// can bind the same port at the same time.
	///
	/// If this is set to `false` then the socket can be used to send and
	/// receive packets from an IPv4-mapped IPv6 address.
	pub fn set_only_v6(&self, only_v6: bool) -> io::Result<()> {
	self.sys.set_only_v6(only_v6)
	}

	/// Gets the value of the `IPV6_V6ONLY` option for this socket.
	///
	/// For more information about this option, see [`set_only_v6`][link].
	///
	/// [link]: #method.set_only_v6
	pub fn only_v6(&self) -> io::Result<bool> {
	self.sys.only_v6()
	}

	/// Get the value of the `SO_ERROR` option on this socket.
	///
	/// This will retrieve the stored error in the underlying socket, clearing
	/// the field in the process. This can be useful for checking errors between
	/// calls.
	pub fn take_error(&self) -> io::Result<Option<io::Error>> {
	self.sys.take_error()
	}
	}

	impl Evented for UdpSocket {
	fn register(&self, poll: &Poll, token: Token, interest: Ready, opts: PollOpt) -> io::Result<()> {
	self.selector_id.associate_selector(poll)?;
	self.sys.register(poll, token, interest, opts)
	}

	fn reregister(&self, poll: &Poll, token: Token, interest: Ready, opts: PollOpt) -> io::Result<()> {
	self.sys.reregister(poll, token, interest, opts)
	}

	fn deregister(&self, poll: &Poll) -> io::Result<()> {
	self.sys.deregister(poll)
	}
	}

	impl fmt::Debug for UdpSocket {
	fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
	fmt::Debug::fmt(&self.sys, f)
	}
	}

	/*
	*
	* ===== UNIX ext =====
	*
	*/

	#[cfg(all(unix, not(target_os = "fuchsia")))]
	use std::os::unix::io::{IntoRawFd, AsRawFd, FromRawFd, RawFd};

	#[cfg(all(unix, not(target_os = "fuchsia")))]
	impl IntoRawFd for UdpSocket {
	fn into_raw_fd(self) -> RawFd {
	self.sys.into_raw_fd()
	}
	}

	#[cfg(all(unix, not(target_os = "fuchsia")))]
	impl AsRawFd for UdpSocket {
	fn as_raw_fd(&self) -> RawFd {
	self.sys.as_raw_fd()
	}
	}

	#[cfg(all(unix, not(target_os = "fuchsia")))]
	impl FromRawFd for UdpSocket {
	unsafe fn from_raw_fd(fd: RawFd) -> UdpSocket {
	UdpSocket {
	sys: FromRawFd::from_raw_fd(fd),
	selector_id: SelectorId::new(),
	}
	}
	}