diff --git a/.gitignore b/.gitignore
index 0764966..42c626a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -8,17 +8,12 @@
 .#*
 
 # Configure artifacts
-ABOUT-NLS
 Makefile
-Makefile.in
-aclocal.m4
 autom4te.cache
 config.cache
 config.h
-config.h.in
 config.log
 config.status
-configure
 stamp-h1
 
 # Build artifacts
diff --git a/ABOUT-NLS b/ABOUT-NLS
new file mode 100644
index 0000000..b1de1b6
--- /dev/null
+++ b/ABOUT-NLS
@@ -0,0 +1,1282 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international!  The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages.  A few packages already provide translations for their
+messages.
+
+   If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site.  But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+   Installers will find here some useful hints.  These notes also
+explain how users should proceed for getting the programs to use the
+available translations.  They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+1.1 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language.  Most such
+packages use GNU `gettext'.  Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+   By default, this package will be installed to allow translation of
+messages.  It will automatically detect whether the system already
+provides the GNU `gettext' functions.  Installers may use special
+options at configuration time for changing the default behaviour.  The
+command:
+
+     ./configure --disable-nls
+
+will _totally_ disable translation of messages.
+
+   When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl' library
+and will decide to use it.  If not, you may have to to use the
+`--with-libintl-prefix' option to tell `configure' where to look for it.
+
+   Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language.  Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package.  However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.2 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination.  If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect.  Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code.  For example, let's
+suppose that you speak German and live in Germany.  At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+   You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries.  For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil.  The
+country code serves to distinguish the dialects.
+
+   The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc.  On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'.  You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+   Not all programs have translations for all languages.  By default, an
+English message is shown in place of a nonexistent translation.  If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'.  GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries.  For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+   Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003).  During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+   In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect.  For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.3 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list.  The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+   If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended.  For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+     subscribe
+
+   Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around.  If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator@translationproject.org' to
+reach the coordinator for all translator teams.
+
+   The English team is special.  It works at improving and uniformizing
+the terminology in use.  Proven linguistic skills are praised more than
+programming skills, here.
+
+1.4 Available Packages
+======================
+
+Languages are not equally supported in all packages.  The following
+matrix shows the current state of internationalization, as of June
+2010.  The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+     Ready PO files       af am an ar as ast az be be@latin bg bn_IN bs ca
+                        +--------------------------------------------------+
+     a2ps               |                       []                      [] |
+     aegis              |                                                  |
+     ant-phone          |                                                  |
+     anubis             |                                                  |
+     aspell             |                []                             [] |
+     bash               |                                                  |
+     bfd                |                                                  |
+     bibshelf           |                []                                |
+     binutils           |                                                  |
+     bison              |                                                  |
+     bison-runtime      |                []                                |
+     bluez-pin          | []             []                                |
+     bombono-dvd        |                                                  |
+     buzztard           |                                                  |
+     cflow              |                                                  |
+     clisp              |                                                  |
+     coreutils          |                                   []          [] |
+     cpio               |                                                  |
+     cppi               |                                                  |
+     cpplib             |                                               [] |
+     cryptsetup         |                                                  |
+     dfarc              |                                                  |
+     dialog             |                             []                [] |
+     dico               |                                                  |
+     diffutils          |                                               [] |
+     dink               |                                                  |
+     doodle             |                                                  |
+     e2fsprogs          |                                               [] |
+     enscript           |                                               [] |
+     exif               |                                                  |
+     fetchmail          |                                               [] |
+     findutils          |                                   []             |
+     flex               |                                               [] |
+     freedink           |                                                  |
+     gas                |                                                  |
+     gawk               |                []                             [] |
+     gcal               |                                               [] |
+     gcc                |                                                  |
+     gettext-examples   | []             []                 []          [] |
+     gettext-runtime    |                                   []          [] |
+     gettext-tools      |                                   []          [] |
+     gip                |                                   []             |
+     gjay               |                                                  |
+     gliv               |                                   []             |
+     glunarclock        |                []                 []             |
+     gnubiff            |                                                  |
+     gnucash            |                                               [] |
+     gnuedu             |                                                  |
+     gnulib             |                                                  |
+     gnunet             |                                                  |
+     gnunet-gtk         |                                                  |
+     gnutls             |                                                  |
+     gold               |                                                  |
+     gpe-aerial         |                                                  |
+     gpe-beam           |                                                  |
+     gpe-bluetooth      |                                                  |
+     gpe-calendar       |                                                  |
+     gpe-clock          |                []                                |
+     gpe-conf           |                                                  |
+     gpe-contacts       |                                                  |
+     gpe-edit           |                                                  |
+     gpe-filemanager    |                                                  |
+     gpe-go             |                                                  |
+     gpe-login          |                                                  |
+     gpe-ownerinfo      |                []                                |
+     gpe-package        |                                                  |
+     gpe-sketchbook     |                                                  |
+     gpe-su             |                []                                |
+     gpe-taskmanager    |                []                                |
+     gpe-timesheet      |                []                                |
+     gpe-today          |                []                                |
+     gpe-todo           |                                                  |
+     gphoto2            |                                                  |
+     gprof              |                                   []             |
+     gpsdrive           |                                                  |
+     gramadoir          |                                                  |
+     grep               |                                                  |
+     grub               |                []                             [] |
+     gsasl              |                                                  |
+     gss                |                                                  |
+     gst-plugins-bad    |                                   []             |
+     gst-plugins-base   |                                   []             |
+     gst-plugins-good   |                                   []             |
+     gst-plugins-ugly   |                                   []             |
+     gstreamer          | []                                []          [] |
+     gtick              |                                                  |
+     gtkam              |                       []                         |
+     gtkorphan          |                                   []             |
+     gtkspell           | []             []     []                         |
+     gutenprint         |                                                  |
+     hello              |                                   []             |
+     help2man           |                                                  |
+     hylafax            |                                                  |
+     idutils            |                                                  |
+     indent             |                                   []          [] |
+     iso_15924          |                                                  |
+     iso_3166           | []          []        []          []  []   [] [] |
+     iso_3166_2         |                                                  |
+     iso_4217           |                                                  |
+     iso_639            |             [] []     []              []         |
+     iso_639_3          |                                                  |
+     jwhois             |                                                  |
+     kbd                |                                                  |
+     keytouch           |                                               [] |
+     keytouch-editor    |                                                  |
+     keytouch-keyboa... |                                               [] |
+     klavaro            |          []                                      |
+     latrine            |                                                  |
+     ld                 |                                   []             |
+     leafpad            |                                   []          [] |
+     libc               |                                   []          [] |
+     libexif            |                       ()                         |
+     libextractor       |                                                  |
+     libgnutls          |                                                  |
+     libgpewidget       |                                                  |
+     libgpg-error       |                                                  |
+     libgphoto2         |                                                  |
+     libgphoto2_port    |                                                  |
+     libgsasl           |                                                  |
+     libiconv           |                                   []             |
+     libidn             |                                                  |
+     lifelines          |                                                  |
+     liferea            |                             []                [] |
+     lilypond           |                                                  |
+     linkdr             |          []                                      |
+     lordsawar          |                                                  |
+     lprng              |                                                  |
+     lynx               |                                               [] |
+     m4                 |                                                  |
+     mailfromd          |                                                  |
+     mailutils          |                                                  |
+     make               |                                                  |
+     man-db             |                                                  |
+     man-db-manpages    |                                                  |
+     minicom            |                                                  |
+     mkisofs            |                                                  |
+     myserver           |                                                  |
+     nano               |                                   []          [] |
+     opcodes            |                                                  |
+     parted             |                                                  |
+     pies               |                                                  |
+     popt               |                                                  |
+     psmisc             |                                                  |
+     pspp               |                                               [] |
+     pwdutils           |                                                  |
+     radius             |                                               [] |
+     recode             |                       []                      [] |
+     rosegarden         |                                                  |
+     rpm                |                                                  |
+     rush               |                                                  |
+     sarg               |                                                  |
+     screem             |                                                  |
+     scrollkeeper       |                    [] []                      [] |
+     sed                |                []                             [] |
+     sharutils          |                                   []          [] |
+     shishi             |                                                  |
+     skencil            |                                                  |
+     solfege            |                                                  |
+     solfege-manual     |                                                  |
+     soundtracker       |                                                  |
+     sp                 |                                                  |
+     sysstat            |                                                  |
+     tar                |                                   []             |
+     texinfo            |                                                  |
+     tin                |                                                  |
+     unicode-han-tra... |                                                  |
+     unicode-transla... |                                                  |
+     util-linux-ng      |                                               [] |
+     vice               |                                                  |
+     vmm                |                                                  |
+     vorbis-tools       |                                                  |
+     wastesedge         |                                                  |
+     wdiff              |                                                  |
+     wget               |                       []                      [] |
+     wyslij-po          |                                                  |
+     xchat              |                []     []          []          [] |
+     xdg-user-dirs      | []    []    [] []     []    []    []  []      [] |
+     xkeyboard-config   |                                   []          [] |
+                        +--------------------------------------------------+
+                          af am an ar as ast az be be@latin bg bn_IN bs ca
+                           6  0  1  2  3 19   1 10     3    28   3    1 38
+
+                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
+                        +-------------------------------------------------+
+     a2ps               |     [] []  []  []     []            [] []       |
+     aegis              |        []  []                       []          |
+     ant-phone          |        []  ()                                   |
+     anubis             |        []  []                                   |
+     aspell             |     [] []  []         []            []          |
+     bash               |     []                           [] []          |
+     bfd                |                                     []          |
+     bibshelf           |        []  []                       []          |
+     binutils           |                                     []          |
+     bison              |            []  []                               |
+     bison-runtime      |        []  []  []                      []       |
+     bluez-pin          |     [] []  []  []                [] []          |
+     bombono-dvd        |        []                                       |
+     buzztard           |     [] []  []                                   |
+     cflow              |        []  []                                   |
+     clisp              |        []  []     []                []          |
+     coreutils          |     [] []  []                          []       |
+     cpio               |                                                 |
+     cppi               |                                                 |
+     cpplib             |        []  []                       []          |
+     cryptsetup         |            []                                   |
+     dfarc              |        []  []                       []          |
+     dialog             |        []  []                    [] []    []    |
+     dico               |                                                 |
+     diffutils          |     [] []  []  []                [] []          |
+     dink               |        []  []                       []          |
+     doodle             |            []                                   |
+     e2fsprogs          |     []     []                       []          |
+     enscript           |        []  []         []                        |
+     exif               |     () []  []                                   |
+     fetchmail          |     [] []  ()  []     []            []          |
+     findutils          |     [] []  []                                   |
+     flex               |            []                       []          |
+     freedink           |        []  []                       []          |
+     gas                |                                     []          |
+     gawk               |        []  []                       []          |
+     gcal               |                                     []          |
+     gcc                |            []                       []          |
+     gettext-examples   |            []  []                [] []          |
+     gettext-runtime    |        []  []                    [] []          |
+     gettext-tools      |            []                       []    []    |
+     gip                |        []  []                       []    []    |
+     gjay               |            []                                   |
+     gliv               |     [] []  []                                   |
+     glunarclock        |        []  []                                   |
+     gnubiff            |            ()                                   |
+     gnucash            |     []     ()  ()     ()            ()          |
+     gnuedu             |        []                           []          |
+     gnulib             |            []                       []          |
+     gnunet             |                                                 |
+     gnunet-gtk         |        []                                       |
+     gnutls             |     []     []                                   |
+     gold               |                                     []          |
+     gpe-aerial         |     [] []  []                       []          |
+     gpe-beam           |     [] []  []                       []          |
+     gpe-bluetooth      |        []  []                                   |
+     gpe-calendar       |        []                                       |
+     gpe-clock          |     [] []  []                       []          |
+     gpe-conf           |     [] []  []                                   |
+     gpe-contacts       |        []  []                       []          |
+     gpe-edit           |        []  []                                   |
+     gpe-filemanager    |        []  []                       []          |
+     gpe-go             |     [] []  []                       []          |
+     gpe-login          |        []  []                                   |
+     gpe-ownerinfo      |     [] []  []                       []          |
+     gpe-package        |        []  []                       []          |
+     gpe-sketchbook     |     [] []  []                       []          |
+     gpe-su             |     [] []  []                       []          |
+     gpe-taskmanager    |     [] []  []                       []          |
+     gpe-timesheet      |     [] []  []                       []          |
+     gpe-today          |     [] []  []                       []          |
+     gpe-todo           |        []  []                       []          |
+     gphoto2            |     [] []  ()         []            []    []    |
+     gprof              |        []  []                       []          |
+     gpsdrive           |        []                           [] []       |
+     gramadoir          |        []  []                    []             |
+     grep               |     []                                          |
+     grub               |        []  []                                   |
+     gsasl              |            []                                   |
+     gss                |                                                 |
+     gst-plugins-bad    |     [] []  []                       []    []    |
+     gst-plugins-base   |     [] []  []                       []    []    |
+     gst-plugins-good   |     [] []  []  []                   []    []    |
+     gst-plugins-ugly   |     [] []  []  []                   []    []    |
+     gstreamer          |     [] []  []                       []    []    |
+     gtick              |        []  ()                    []             |
+     gtkam              |     [] []  ()                    [] []          |
+     gtkorphan          |     [] []  []                    []             |
+     gtkspell           |     [] []  []  []                [] []    []    |
+     gutenprint         |        []  []         []                        |
+     hello              |        []  []                    [] []          |
+     help2man           |            []                                   |
+     hylafax            |            []                       []          |
+     idutils            |        []  []                                   |
+     indent             |     [] []  []                    [] [] [] []    |
+     iso_15924          |        []      ()                [] []          |
+     iso_3166           | []  [] []  []  ()                [] [] [] ()    |
+     iso_3166_2         |                ()                               |
+     iso_4217           |     [] []  []  ()                   [] []       |
+     iso_639            | []  [] []  []  ()                [] []          |
+     iso_639_3          | []                                              |
+     jwhois             |                                     []          |
+     kbd                |     [] []  []  []                   []          |
+     keytouch           |        []  []                                   |
+     keytouch-editor    |        []  []                                   |
+     keytouch-keyboa... |        []                                       |
+     klavaro            |     [] []  []                    []             |
+     latrine            |        []  ()                                   |
+     ld                 |        []                           []          |
+     leafpad            |     [] []  []  []                   []    []    |
+     libc               |     [] []  []                       []          |
+     libexif            |        []  []         ()                        |
+     libextractor       |                                                 |
+     libgnutls          |     []                                          |
+     libgpewidget       |        []  []                                   |
+     libgpg-error       |     []     []                                   |
+     libgphoto2         |        []  ()                                   |
+     libgphoto2_port    |        []  ()                             []    |
+     libgsasl           |                                                 |
+     libiconv           |     [] []  []                    []    []       |
+     libidn             |     []     []                    []             |
+     lifelines          |        []  ()                                   |
+     liferea            |     []     []  []                   []    []    |
+     lilypond           |     []     []                       []          |
+     linkdr             |        []  []                       []          |
+     lordsawar          |        []                                       |
+     lprng              |                                                 |
+     lynx               |     [] []  []                          []       |
+     m4                 |     [] []  []  []                               |
+     mailfromd          |                                                 |
+     mailutils          |                                     []          |
+     make               |        []  []                       []          |
+     man-db             |                                                 |
+     man-db-manpages    |                                                 |
+     minicom            |     [] []  []                       []          |
+     mkisofs            |                                                 |
+     myserver           |                                                 |
+     nano               |            []                       []    []    |
+     opcodes            |            []                       []          |
+     parted             |     []     []                                   |
+     pies               |                                                 |
+     popt               |     [] []  []                    [] []          |
+     psmisc             |     []     []                             []    |
+     pspp               |                                     []          |
+     pwdutils           |        []                                       |
+     radius             |                                     []          |
+     recode             |     [] []  []  []                [] []          |
+     rosegarden         |     ()     ()                       ()          |
+     rpm                |        []  []                       []          |
+     rush               |                                                 |
+     sarg               |                                                 |
+     screem             |                                                 |
+     scrollkeeper       |     [] []  []         []            []          |
+     sed                |     []     []  []                [] [] []       |
+     sharutils          |        []  []                       [] []       |
+     shishi             |                                                 |
+     skencil            |        []  ()                       []          |
+     solfege            |            []                    []    []       |
+     solfege-manual     |                                  []    []       |
+     soundtracker       |        []  []                       []          |
+     sp                 |            []                                   |
+     sysstat            |        []  []                             []    |
+     tar                |     []     []                          [] []    |
+     texinfo            |            []                    [] []          |
+     tin                |            []                          []       |
+     unicode-han-tra... |                                                 |
+     unicode-transla... |                                                 |
+     util-linux-ng      |     [] []  []                       []          |
+     vice               |        ()  ()                                   |
+     vmm                |            []                                   |
+     vorbis-tools       |     []                           []             |
+     wastesedge         |        []                                       |
+     wdiff              |            []                       []          |
+     wget               |     []     []                          []       |
+     wyslij-po          |                                                 |
+     xchat              |     []     []  []                   [] []       |
+     xdg-user-dirs      | []  [] []  []  []                [] [] [] []    |
+     xkeyboard-config   | []  [] []  []                    [] []          |
+                        +-------------------------------------------------+
+                          crh cs da  de  el en en_GB en_ZA eo es et eu fa
+                           5  64 105 117 18  1   8     0   28 89 18 19  0
+
+                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
+                        +----------------------------------------------------+
+     a2ps               | []  []                          []        []       |
+     aegis              |     []                                 []          |
+     ant-phone          |     []                                 []          |
+     anubis             | []  []                          []     []          |
+     aspell             |     []  []                      []     []          |
+     bash               | []  []                          []        []       |
+     bfd                | []  []                          []                 |
+     bibshelf           | []  []  []                      []     []          |
+     binutils           | []  []                          []                 |
+     bison              | []  []  []                      []                 |
+     bison-runtime      | []  []  []                      []     [] []       |
+     bluez-pin          | []  []  []                [] [] []  []    []       |
+     bombono-dvd        | []                                                 |
+     buzztard           |                                 []                 |
+     cflow              | []      []                      []                 |
+     clisp              |     []                                             |
+     coreutils          |     []  []                []    []     []          |
+     cpio               | []  []  []                      []                 |
+     cppi               | []  []                                             |
+     cpplib             | []  []                          []                 |
+     cryptsetup         |     []                          []     []          |
+     dfarc              | []  []                                 []          |
+     dialog             |     []  [] []                   []  [] [] []       |
+     dico               |                                                    |
+     diffutils          | []  []  [] []    []       []    []     [] []       |
+     dink               |     []                                             |
+     doodle             |         []                             []          |
+     e2fsprogs          |     []                          []                 |
+     enscript           |     []  []             []       []                 |
+     exif               | []  []                          []  [] [] []       |
+     fetchmail          |     []                          []     [] []       |
+     findutils          | []  []  []                []    []     []          |
+     flex               | []  []  []                                         |
+     freedink           | []  []                          []                 |
+     gas                |     []                          []                 |
+     gawk               |     []  []       []             []     () []       |
+     gcal               |     []                                             |
+     gcc                |                                 []                 |
+     gettext-examples   | []  []  []                []    []     [] []       |
+     gettext-runtime    | []  []  []                      []     [] []       |
+     gettext-tools      |     []                          []     [] []       |
+     gip                | []  []  [] []                   []        []       |
+     gjay               | []                                                 |
+     gliv               | []  ()                                             |
+     glunarclock        | []      []                []    []                 |
+     gnubiff            |     ()                          []     ()          |
+     gnucash            | ()  ()           ()       ()           () []       |
+     gnuedu             |     []                                 []          |
+     gnulib             | []  []  []                []           [] []       |
+     gnunet             |                                                    |
+     gnunet-gtk         |     []                                             |
+     gnutls             |     []                                 []          |
+     gold               | []                              []                 |
+     gpe-aerial         | []  []                          []                 |
+     gpe-beam           | []  []                          []        []       |
+     gpe-bluetooth      | []                              []     [] []       |
+     gpe-calendar       | []                                        []       |
+     gpe-clock          | []  []                    []    []        []       |
+     gpe-conf           | []  []                          []        []       |
+     gpe-contacts       | []  []                          []        []       |
+     gpe-edit           | []                              []        []       |
+     gpe-filemanager    | []                        []    []        []       |
+     gpe-go             | []  []                    []    []        []       |
+     gpe-login          | []                              []        []       |
+     gpe-ownerinfo      | []  []                    []    []        []       |
+     gpe-package        | []                              []        []       |
+     gpe-sketchbook     | []  []                          []        []       |
+     gpe-su             | []  []     []             []    []        []       |
+     gpe-taskmanager    | []  []                    []    []        []       |
+     gpe-timesheet      | []  []  []                      []        []       |
+     gpe-today          | []  []  [] []             []    []        []       |
+     gpe-todo           | []                              []        []       |
+     gphoto2            | []  []                    []    []     [] []       |
+     gprof              | []  []  []                      []                 |
+     gpsdrive           |            []                   []     []          |
+     gramadoir          |     []  []                      []                 |
+     grep               | []                                     []          |
+     grub               | []                        []    []     []          |
+     gsasl              | []  []  []                      []     []          |
+     gss                | []  []  []                      []     []          |
+     gst-plugins-bad    | []  []                    []    []     [] []       |
+     gst-plugins-base   | []  []                    []    []     [] []       |
+     gst-plugins-good   | []  []                    []    []     [] []       |
+     gst-plugins-ugly   | []  []                    []    []     [] []       |
+     gstreamer          | []  []                    []    []     []          |
+     gtick              | []  []  []                      []     []          |
+     gtkam              |     []                    []    []     [] []       |
+     gtkorphan          |     []                          []     []          |
+     gtkspell           | []  []  [] []             [] [] []     [] []       |
+     gutenprint         | []  []                    []           []          |
+     hello              | []      []                      []                 |
+     help2man           | []  []                                             |
+     hylafax            |                                 []                 |
+     idutils            | []  []  []                []    []     []          |
+     indent             | []  []  [] []             []    []     [] []       |
+     iso_15924          | []  ()                          []     []          |
+     iso_3166           | []  ()  [] [] [] [] [] [] []    []     [] []       |
+     iso_3166_2         |     ()                    []    []     []          |
+     iso_4217           | []  ()                    []    []     [] []       |
+     iso_639            | []  ()  []    []          []    []     [] []    [] |
+     iso_639_3          |     ()                                 []       [] |
+     jwhois             | []  []                    []    []     []          |
+     kbd                |     []                          []                 |
+     keytouch           | []  []  []                []    []     []          |
+     keytouch-editor    | []      []                []    []     []          |
+     keytouch-keyboa... | []      []                []    []     []          |
+     klavaro            |            []             []                       |
+     latrine            | []                              []     []          |
+     ld                 | []  []  []                      []                 |
+     leafpad            | []  []  []       []       []    []     [] ()       |
+     libc               | []  []     []                   []        []       |
+     libexif            |                                        []          |
+     libextractor       |                                                    |
+     libgnutls          |     []                                 []          |
+     libgpewidget       | []      []                      []        []       |
+     libgpg-error       |     []                                 []          |
+     libgphoto2         |     []                                 [] []       |
+     libgphoto2_port    |     []                                 [] []       |
+     libgsasl           | []  []  []                      []     []          |
+     libiconv           | []  []  []                      []     [] []       |
+     libidn             | []  []                          []     []          |
+     lifelines          |     ()                                             |
+     liferea            |     []                    []           [] []       |
+     lilypond           | []  []                                             |
+     linkdr             | []               []    [] []           []          |
+     lordsawar          |                                                    |
+     lprng              |                                 []                 |
+     lynx               |     []                    []    []     [] []       |
+     m4                 | []  []  [] []                   []        []       |
+     mailfromd          |                                                    |
+     mailutils          |     []                          []                 |
+     make               | []  []  [] []    []    []       []     [] []       |
+     man-db             |                                 []     []          |
+     man-db-manpages    |                                 []                 |
+     minicom            | []  []                    []    []        []       |
+     mkisofs            | []  []                          []     []          |
+     myserver           |                                                    |
+     nano               | []  []  [] []             []           []          |
+     opcodes            | []  []  []                      []                 |
+     parted             |     []                          []     [] []       |
+     pies               |                                                    |
+     popt               | []  []  [] []             []    []  [] [] []       |
+     psmisc             | []  []                          []                 |
+     pspp               |                                                    |
+     pwdutils           |     []                          []                 |
+     radius             |     []                          []                 |
+     recode             | []  []  [] []    []       []    []     []          |
+     rosegarden         | ()  ()                          ()     () ()       |
+     rpm                |                                 []        []       |
+     rush               |                                                    |
+     sarg               |     []                                             |
+     screem             |                                        [] []       |
+     scrollkeeper       | []                        []    []     []          |
+     sed                | []  []  [] []             []    []     [] []       |
+     sharutils          | []  []  []                []    []     [] []       |
+     shishi             |     []                                             |
+     skencil            |     []                                             |
+     solfege            | []  []     []                          []          |
+     solfege-manual     |     []     []                                      |
+     soundtracker       |     []                                 []          |
+     sp                 |     []                                    ()       |
+     sysstat            | []  []                          []     [] []       |
+     tar                | []  []  []                []    []     [] []       |
+     texinfo            |     []                          []     [] []       |
+     tin                |     []                                             |
+     unicode-han-tra... |                                                    |
+     unicode-transla... |     []  []                                         |
+     util-linux-ng      | []  []                    []    []     [] []       |
+     vice               |     ()                    ()           ()          |
+     vmm                |     []                                             |
+     vorbis-tools       |                                 []                 |
+     wastesedge         |     ()                                 ()          |
+     wdiff              | []                                                 |
+     wget               | []  []  []             [] []    []     [] []       |
+     wyslij-po          | []  []                          []                 |
+     xchat              | []  []        []    []    []    []     [] []    [] |
+     xdg-user-dirs      | []  []  [] [] [] [] []    []    []  [] [] []    [] |
+     xkeyboard-config   | []  []                    []    []     []          |
+                        +----------------------------------------------------+
+                          fi  fr  ga gl gu he hi hr hu hy id  is it ja ka kn
+                          105 121 53 20  4  8  3  5 53  2 120  5 84 67  0  4
+
+                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+                        +-----------------------------------------------+
+     a2ps               |                               []              |
+     aegis              |                                               |
+     ant-phone          |                                               |
+     anubis             |                               []    []        |
+     aspell             |                         []                    |
+     bash               |                                               |
+     bfd                |                                               |
+     bibshelf           |                []             []              |
+     binutils           |                                               |
+     bison              |                               []              |
+     bison-runtime      |       []    [] []             []    []        |
+     bluez-pin          |    [] []    [] []             []              |
+     bombono-dvd        |                                               |
+     buzztard           |                                               |
+     cflow              |                                               |
+     clisp              |                                               |
+     coreutils          |          []                                   |
+     cpio               |                                               |
+     cppi               |                                               |
+     cpplib             |                                               |
+     cryptsetup         |                                               |
+     dfarc              |                   []                          |
+     dialog             |    []       [] []             []    []        |
+     dico               |                                               |
+     diffutils          |                []             []              |
+     dink               |                                               |
+     doodle             |                                               |
+     e2fsprogs          |                                               |
+     enscript           |                                               |
+     exif               |                []                             |
+     fetchmail          |                                               |
+     findutils          |                                               |
+     flex               |                                               |
+     freedink           |                                     []        |
+     gas                |                                               |
+     gawk               |                                               |
+     gcal               |                                               |
+     gcc                |                                               |
+     gettext-examples   |       []       []             [] []           |
+     gettext-runtime    | []                                            |
+     gettext-tools      | []                                            |
+     gip                |                []             []              |
+     gjay               |                                               |
+     gliv               |                                               |
+     glunarclock        |                []                             |
+     gnubiff            |                                               |
+     gnucash            | ()          ()                      ()     () |
+     gnuedu             |                                               |
+     gnulib             |                                               |
+     gnunet             |                                               |
+     gnunet-gtk         |                                               |
+     gnutls             |                               []              |
+     gold               |                                               |
+     gpe-aerial         |                []                             |
+     gpe-beam           |                []                             |
+     gpe-bluetooth      |                []                []           |
+     gpe-calendar       |                []                             |
+     gpe-clock          | []    []       []             [] []           |
+     gpe-conf           | []             []                             |
+     gpe-contacts       | []             []                             |
+     gpe-edit           |                []                             |
+     gpe-filemanager    | []             []                             |
+     gpe-go             | []             []                []           |
+     gpe-login          |                []                             |
+     gpe-ownerinfo      |                []             []              |
+     gpe-package        | []             []                             |
+     gpe-sketchbook     | []             []                             |
+     gpe-su             | []    []       []             [] [] []        |
+     gpe-taskmanager    | [] [] []       []             [] []           |
+     gpe-timesheet      |                []             []              |
+     gpe-today          |       []       []             [] []           |
+     gpe-todo           |                []                   []        |
+     gphoto2            |                                               |
+     gprof              |                               []              |
+     gpsdrive           |                                               |
+     gramadoir          |                                               |
+     grep               |                                               |
+     grub               |                                               |
+     gsasl              |                                               |
+     gss                |                                               |
+     gst-plugins-bad    |             [] []                [] []        |
+     gst-plugins-base   |             [] []                             |
+     gst-plugins-good   |                []                []           |
+     gst-plugins-ugly   |             [] []             [] [] []        |
+     gstreamer          |                                               |
+     gtick              |                                               |
+     gtkam              |                                     []        |
+     gtkorphan          |                []                      []     |
+     gtkspell           |       []    [] []       []    []    [] []     |
+     gutenprint         |                                               |
+     hello              | []             []             []              |
+     help2man           |                                               |
+     hylafax            |                                               |
+     idutils            |                                               |
+     indent             |                                               |
+     iso_15924          |             [] []                             |
+     iso_3166           | [] []       () [] [] []    []       []        |
+     iso_3166_2         |                                               |
+     iso_4217           |             []                      []        |
+     iso_639            |                      []    []                 |
+     iso_639_3          |                            []                 |
+     jwhois             |                []                             |
+     kbd                |                                               |
+     keytouch           |                []                             |
+     keytouch-editor    |                []                             |
+     keytouch-keyboa... |                []                             |
+     klavaro            |                                     []        |
+     latrine            |                []                             |
+     ld                 |                                               |
+     leafpad            | []          [] []                             |
+     libc               | []                                            |
+     libexif            |                                               |
+     libextractor       |                                               |
+     libgnutls          |                               []              |
+     libgpewidget       |                []             []              |
+     libgpg-error       |                                               |
+     libgphoto2         |                                               |
+     libgphoto2_port    |                                               |
+     libgsasl           |                                               |
+     libiconv           |                                               |
+     libidn             |                                               |
+     lifelines          |                                               |
+     liferea            |                                               |
+     lilypond           |                                               |
+     linkdr             |                                               |
+     lordsawar          |                                               |
+     lprng              |                                               |
+     lynx               |                                               |
+     m4                 |                                               |
+     mailfromd          |                                               |
+     mailutils          |                                               |
+     make               | []                                            |
+     man-db             |                                               |
+     man-db-manpages    |                                               |
+     minicom            |                                     []        |
+     mkisofs            |                                               |
+     myserver           |                                               |
+     nano               |                               []    []        |
+     opcodes            |                                               |
+     parted             |                                               |
+     pies               |                                               |
+     popt               | []             []                   []        |
+     psmisc             |                                               |
+     pspp               |                                               |
+     pwdutils           |                                               |
+     radius             |                                               |
+     recode             |                                               |
+     rosegarden         |                                               |
+     rpm                |                                               |
+     rush               |                                               |
+     sarg               |                                               |
+     screem             |                                               |
+     scrollkeeper       |                                     []     [] |
+     sed                |                                               |
+     sharutils          |                                               |
+     shishi             |                                               |
+     skencil            |                                               |
+     solfege            |                                     []        |
+     solfege-manual     |                                               |
+     soundtracker       |                                               |
+     sp                 |                                               |
+     sysstat            |                []                             |
+     tar                |       []                                      |
+     texinfo            |                                     []        |
+     tin                |                                               |
+     unicode-han-tra... |                                               |
+     unicode-transla... |                                               |
+     util-linux-ng      |                                               |
+     vice               |                                               |
+     vmm                |                                               |
+     vorbis-tools       |                                               |
+     wastesedge         |                                               |
+     wdiff              |                                               |
+     wget               |             []                                |
+     wyslij-po          |                                               |
+     xchat              | []             [] []                          |
+     xdg-user-dirs      | [] []       [] [] []       []       [] []     |
+     xkeyboard-config   | []    []    []                                |
+                        +-----------------------------------------------+
+                          ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
+                          20  5 10  1 13 48  4  2  2  4 24 10 20  3   1
+
+                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
+                        +---------------------------------------------------+
+     a2ps               | []           []     []  []   [] []       []    [] |
+     aegis              | []                      []      []                |
+     ant-phone          |                         []   []                   |
+     anubis             | []           []                 []                |
+     aspell             | []                           [] []    [] []       |
+     bash               | []                                    []          |
+     bfd                |                                 []                |
+     bibshelf           | []  []                                            |
+     binutils           |                                 []    []          |
+     bison              | []           []                 []                |
+     bison-runtime      | []           []     []  []   [] []       []       |
+     bluez-pin          | []           []         []   [] []    [] []    [] |
+     bombono-dvd        |     []                          ()                |
+     buzztard           | []  []                                            |
+     cflow              |              []                                   |
+     clisp              | []                              []                |
+     coreutils          | []           []     []  []      []       []       |
+     cpio               | []           []                 []                |
+     cppi               |              []                                   |
+     cpplib             | []                                                |
+     cryptsetup         | []                                                |
+     dfarc              |              []                                   |
+     dialog             | []           []         []      []                |
+     dico               |              []                                   |
+     diffutils          | []           []         []   [] []             [] |
+     dink               | ()                                                |
+     doodle             | []                                          []    |
+     e2fsprogs          | []           []                                   |
+     enscript           | []                      []   [] []       []       |
+     exif               | []           []              [] ()    []          |
+     fetchmail          | []           []                 []          []    |
+     findutils          | []           []     []          []       []       |
+     flex               | []           []         []   [] []                |
+     freedink           | []           []                                   |
+     gas                |                                                   |
+     gawk               | []           []         []   []                   |
+     gcal               |                                                   |
+     gcc                |                                                [] |
+     gettext-examples   | []           []     []       [] []    [] []    [] |
+     gettext-runtime    | []  []       []     []       [] []    [] []    [] |
+     gettext-tools      |              []              [] []    [] []    [] |
+     gip                | []           []                 []    []       [] |
+     gjay               |                                                   |
+     gliv               | []           []         []   [] []    []          |
+     glunarclock        | []                      []   []       []       [] |
+     gnubiff            | []                           ()                   |
+     gnucash            | []           ()         ()      ()                |
+     gnuedu             | []                                                |
+     gnulib             | []           []                 []       []       |
+     gnunet             |                                                   |
+     gnunet-gtk         |                                                   |
+     gnutls             | []           []                                   |
+     gold               |                                                   |
+     gpe-aerial         | []                  []  []   [] []       []    [] |
+     gpe-beam           | []                  []  []   [] []       []    [] |
+     gpe-bluetooth      | []                      []                        |
+     gpe-calendar       |                         []      []       []    [] |
+     gpe-clock          | []                  []  []   [] []    [] []    [] |
+     gpe-conf           | []                  []  []   [] []    [] []       |
+     gpe-contacts       |                         []   [] []       []    [] |
+     gpe-edit           | []           []                          []       |
+     gpe-filemanager    | []                              []       []       |
+     gpe-go             | []           []         []   [] []    [] []    [] |
+     gpe-login          | []                      []                        |
+     gpe-ownerinfo      | []                  []  []   [] []    [] []    [] |
+     gpe-package        | []                                       []       |
+     gpe-sketchbook     | []                  []  []   [] []       []    [] |
+     gpe-su             | []                  []  []   [] []    [] []    [] |
+     gpe-taskmanager    | []                  []  []   [] []    [] []    [] |
+     gpe-timesheet      | []                  []  []   [] []    [] []    [] |
+     gpe-today          | []                  []  []   [] []    [] []    [] |
+     gpe-todo           | []                      []      []       []    [] |
+     gphoto2            | []        [] []         []   [] []    []       [] |
+     gprof              | []                      []   []                   |
+     gpsdrive           | []                              []                |
+     gramadoir          | []                                    []          |
+     grep               | []           []                 []    []          |
+     grub               | []           []                 []                |
+     gsasl              | []           []                       []       [] |
+     gss                |              []              []       []          |
+     gst-plugins-bad    | []           []         []      []    []    []    |
+     gst-plugins-base   | []           []         []      []    []          |
+     gst-plugins-good   | []           []         []      []    []          |
+     gst-plugins-ugly   | []           []         []      []    [] []       |
+     gstreamer          | []           []         []      []    []          |
+     gtick              | []                              []    []          |
+     gtkam              | []        [] []         []      []    []          |
+     gtkorphan          | []                                                |
+     gtkspell           | []           []     []  []   [] []    [] [] [] [] |
+     gutenprint         | []                              []                |
+     hello              | []           []                       [] []       |
+     help2man           |              []                 []                |
+     hylafax            | []                                                |
+     idutils            | []           []         []   [] []                |
+     indent             | []           []         []   [] []    []       [] |
+     iso_15924          | []           []                 []       []       |
+     iso_3166           | []  [] [] [] []     ()  []   [] [] [] [] [] [] [] |
+     iso_3166_2         | []           []                          []       |
+     iso_4217           | []  []       []     []          [] []    []    [] |
+     iso_639            | []     [] [] []                 [] [] [] []    [] |
+     iso_639_3          |        [] []                                      |
+     jwhois             | []           []         []   []                   |
+     kbd                | []           []              []                   |
+     keytouch           | []           []                       []          |
+     keytouch-editor    | []           []                       []          |
+     keytouch-keyboa... | []           []                       []          |
+     klavaro            | []                      []                        |
+     latrine            |              []                 []                |
+     ld                 |                                                   |
+     leafpad            | []  []       []     []  []      []    [] []    [] |
+     libc               | []           []                 []    []          |
+     libexif            | []           []         ()            []          |
+     libextractor       |                                                   |
+     libgnutls          | []           []                                   |
+     libgpewidget       | []           []                          []       |
+     libgpg-error       |              []              []                   |
+     libgphoto2         | []           []                                   |
+     libgphoto2_port    | []           []         []      []    []          |
+     libgsasl           | []           []              []       []       [] |
+     libiconv           | []           []                       [] []    [] |
+     libidn             | []           []                                   |
+     lifelines          | []           []                                   |
+     liferea            | []           []     []  []   [] ()    ()    []    |
+     lilypond           | []                                                |
+     linkdr             | []                  []          []                |
+     lordsawar          |                                                   |
+     lprng              |              []                                   |
+     lynx               | []                      []      []                |
+     m4                 | []           []         []   [] []                |
+     mailfromd          |              []                                   |
+     mailutils          |              []                                   |
+     make               | []           []         []      []                |
+     man-db             | []           []                 []                |
+     man-db-manpages    | []           []                 []                |
+     minicom            |              []         []   [] []                |
+     mkisofs            | []           []                 []                |
+     myserver           |                                                   |
+     nano               | []           []         []      []                |
+     opcodes            | []                           []                   |
+     parted             | []           []                 []    []          |
+     pies               |              []                                   |
+     popt               | []           []     []          []                |
+     psmisc             | []           []                 []                |
+     pspp               | []                      []                        |
+     pwdutils           |              []                                   |
+     radius             | []           []                 []                |
+     recode             | []           []     []  []   [] []    [] []       |
+     rosegarden         |              ()                 ()                |
+     rpm                | []           []     []                            |
+     rush               | []           []                                   |
+     sarg               |                                                   |
+     screem             |                                                   |
+     scrollkeeper       | []  []       []              [] []    []    [] [] |
+     sed                | []           []     []  []   [] []    [] []    [] |
+     sharutils          | []           []                 []             [] |
+     shishi             |              []                                   |
+     skencil            |                     []  []                        |
+     solfege            | []           []         []      []                |
+     solfege-manual     | []           []         []                        |
+     soundtracker       |                                       []          |
+     sp                 |                                                   |
+     sysstat            | []           []         []      []                |
+     tar                | []           []                 []       []       |
+     texinfo            | []           []              [] []                |
+     tin                |                                 []                |
+     unicode-han-tra... |                                                   |
+     unicode-transla... |                                                   |
+     util-linux-ng      | []           []         []      []       []       |
+     vice               | []                                                |
+     vmm                | []                                                |
+     vorbis-tools       | []           []                                   |
+     wastesedge         | []                                                |
+     wdiff              | []           []                                   |
+     wget               | []           []     []  []      []    [] []       |
+     wyslij-po          | []  []       []                                   |
+     xchat              | []        [] []     []          []    [] [] [] [] |
+     xdg-user-dirs      | []  [] [] [] []  [] []  []   [] []    [] [] [] [] |
+     xkeyboard-config   | []           []                 []                |
+                        +---------------------------------------------------+
+                          nl  nn or pa pl  ps pt pt_BR ro ru rw sk sl sq sr
+                          135 10  4  7 105  1 29  62   47 91  3 54 46  9 37
+
+                          sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
+                        +---------------------------------------------------+
+     a2ps               | []              [] [] [] []                       | 27
+     aegis              |                          []                       |  9
+     ant-phone          | []                 []    []      []               |  9
+     anubis             | []                 [] [] []                       | 15
+     aspell             |                       [] []  []                   | 20
+     bash               | []                    [] []                       | 12
+     bfd                |                          []                       |  6
+     bibshelf           | []                       []      []               | 16
+     binutils           |                       [] []                       |  8
+     bison              | []                       []                       | 12
+     bison-runtime      | []              []    [] []      []          []   | 29
+     bluez-pin          | []              [] [] [] []  []  []          []   | 37
+     bombono-dvd        |                          []                       |  4
+     buzztard           |                          []                       |  7
+     cflow              |                       [] []      []               |  9
+     clisp              |                                                   | 10
+     coreutils          | []                    [] []      []               | 22
+     cpio               | []                 [] [] []      []          []   | 13
+     cppi               |                       [] []                       |  5
+     cpplib             | []                 [] [] []      []          []   | 14
+     cryptsetup         | []                       []                       |  7
+     dfarc              |                          []                       |  9
+     dialog             | []  []          []       []  []  []          []   | 30
+     dico               |                       []                          |  2
+     diffutils          | []                 [] [] []      []          []   | 30
+     dink               |                                                   |  4
+     doodle             | []                       []                       |  7
+     e2fsprogs          | []                 []    []                       | 11
+     enscript           | []                 [] [] []                       | 17
+     exif               | []                       []      []               | 16
+     fetchmail          |                    []    []      []               | 17
+     findutils          | []                 [] [] []      []               | 20
+     flex               | []                 []    []                  []   | 15
+     freedink           |                          []                       | 10
+     gas                |                    []                             |  4
+     gawk               | []                 []    []      []               | 18
+     gcal               | []                 []                             |  5
+     gcc                | []                 []            []               |  7
+     gettext-examples   | []                 [] [] []      []    []    []   | 34
+     gettext-runtime    | []                 [] [] []      []    []    []   | 29
+     gettext-tools      | []                 [] [] []      []          []   | 22
+     gip                | []                       []      []          []   | 22
+     gjay               |                          []                       |  3
+     gliv               | []                 []    []                       | 14
+     glunarclock        | []                       []  []  []          []   | 19
+     gnubiff            | []                       []                       |  4
+     gnucash            |                    () [] ()      []          ()   | 10
+     gnuedu             |                          []                  []   |  7
+     gnulib             | []                    [] []      []               | 16
+     gnunet             |                          []                       |  1
+     gnunet-gtk         | []                 []    []                       |  5
+     gnutls             | []                       []      []               | 10
+     gold               |                          []                       |  4
+     gpe-aerial         | []                       []      []               | 18
+     gpe-beam           | []                       []      []               | 19
+     gpe-bluetooth      | []                       []      []               | 13
+     gpe-calendar       | []                       []  []  []               | 12
+     gpe-clock          | []                 []    []  []  []               | 28
+     gpe-conf           | []                       []  []  []               | 20
+     gpe-contacts       | []                       []      []               | 17
+     gpe-edit           | []                       []      []               | 12
+     gpe-filemanager    | []                       []  []  []               | 16
+     gpe-go             | []                 []    []  []  []               | 25
+     gpe-login          | []                       []      []               | 11
+     gpe-ownerinfo      | []                 []    []      []          []   | 25
+     gpe-package        | []                       []      []               | 13
+     gpe-sketchbook     | []                       []      []               | 20
+     gpe-su             | []                 []    []  []  []               | 30
+     gpe-taskmanager    | []                 []    []  []  []               | 29
+     gpe-timesheet      | []                 []    []      []          []   | 25
+     gpe-today          | []                 []    []  []  []          []   | 30
+     gpe-todo           | []                       []  []  []               | 17
+     gphoto2            | []                    [] []      []          []   | 24
+     gprof              | []                 []    []                       | 15
+     gpsdrive           | []                       []      []               | 11
+     gramadoir          | []                       []      []               | 11
+     grep               |                 []       []      []               | 10
+     grub               | []                       []      []               | 14
+     gsasl              | []                       []      []          []   | 14
+     gss                | []                       []      []               | 11
+     gst-plugins-bad    | []                 []    []      []               | 26
+     gst-plugins-base   | []                 [] [] []      []               | 24
+     gst-plugins-good   | []                 []    []      []               | 24
+     gst-plugins-ugly   | []                 [] [] []      []               | 29
+     gstreamer          | []                    [] []      []               | 22
+     gtick              |                       [] []      []               | 13
+     gtkam              | []                       []      []               | 20
+     gtkorphan          | []                       []      []               | 14
+     gtkspell           | []              [] [] [] []  []  []    []    []   | 45
+     gutenprint         | []                                                | 10
+     hello              | []              [] []    []      []          []   | 21
+     help2man           | []                       []                       |  7
+     hylafax            |                          []                       |  5
+     idutils            | []                 []    []      []               | 17
+     indent             | []                 [] [] []      []          []   | 30
+     iso_15924          |                 ()    [] ()      []          []   | 16
+     iso_3166           | []        []    () [] [] ()  []  []    []    ()   | 53
+     iso_3166_2         |                 ()    [] ()      []               |  9
+     iso_4217           | []              () [] [] ()      []    []         | 26
+     iso_639            | []     [] []    ()    [] ()  []  []    []    []   | 38
+     iso_639_3          |        []                ()                       |  8
+     jwhois             | []                 []    []      []          []   | 16
+     kbd                | []                 [] [] []      []               | 15
+     keytouch           | []                       []      []               | 16
+     keytouch-editor    | []                       []      []               | 14
+     keytouch-keyboa... | []                       []      []               | 14
+     klavaro            |                          []                       | 11
+     latrine            |                    []    []      []               | 10
+     ld                 | []                 []    []                  []   | 11
+     leafpad            | []                 [] [] []      []          []   | 33
+     libc               | []                 []    []      []          []   | 21
+     libexif            |                          []      ()               |  7
+     libextractor       |                          []                       |  1
+     libgnutls          | []                       []      []               |  9
+     libgpewidget       | []                       []      []               | 14
+     libgpg-error       | []                       []      []               |  9
+     libgphoto2         |                       [] []                       |  8
+     libgphoto2_port    | []                    [] []                  []   | 14
+     libgsasl           | []                       []      []               | 13
+     libiconv           | []                       []  []  []               | 21
+     libidn             | ()                       []      []               | 11
+     lifelines          | []                                                |  4
+     liferea            | []                 []            []               | 21
+     lilypond           |                          []                       |  7
+     linkdr             | []                 []    []      []          []   | 17
+     lordsawar          |                                                   |  1
+     lprng              |                          []                       |  3
+     lynx               | []                 [] [] []                       | 17
+     m4                 | []                       []      []          []   | 19
+     mailfromd          |                       [] []                       |  3
+     mailutils          |                          []                       |  5
+     make               | []                 []    []      []               | 21
+     man-db             | []                       []      []               |  8
+     man-db-manpages    |                                                   |  4
+     minicom            | []                       []                       | 16
+     mkisofs            |                          []      []               |  9
+     myserver           |                                                   |  0
+     nano               | []                       []      []          []   | 21
+     opcodes            | []                 []    []                       | 11
+     parted             | []                 [] [] []                  []   | 15
+     pies               |                       [] []                       |  3
+     popt               | []              [] []    []      []          []   | 27
+     psmisc             | []                       []                       | 11
+     pspp               |                                                   |  4
+     pwdutils           | []                       []                       |  6
+     radius             |                       [] []                       |  9
+     recode             | []                 []    []      []               | 28
+     rosegarden         | ()                                                |  0
+     rpm                | []                       []                  []   | 11
+     rush               |                       [] []                       |  4
+     sarg               |                                                   |  1
+     screem             |                          []                       |  3
+     scrollkeeper       | []                 [] [] []                  []   | 27
+     sed                | []                 []    []      []          []   | 30
+     sharutils          | []                 []    []      []          []   | 22
+     shishi             |                          []                       |  3
+     skencil            | []                       []                       |  7
+     solfege            | []                 []    []      []               | 16
+     solfege-manual     |                    []                             |  8
+     soundtracker       | []                 []    []                       |  9
+     sp                 |                    []                             |  3
+     sysstat            |                          []      []               | 15
+     tar                | []                 [] [] []      []          []   | 23
+     texinfo            | []                 [] [] []      []               | 17
+     tin                |                                                   |  4
+     unicode-han-tra... |                                                   |  0
+     unicode-transla... |                                                   |  2
+     util-linux-ng      | []                 [] [] []                       | 20
+     vice               | ()                 ()                             |  1
+     vmm                |                          []                       |  4
+     vorbis-tools       |                          []                       |  6
+     wastesedge         |                                                   |  2
+     wdiff              | []                       []                       |  7
+     wget               | []                 []    []      []          []   | 26
+     wyslij-po          |                       [] []                       |  8
+     xchat              | []              []    [] []      []          []   | 36
+     xdg-user-dirs      | []     [] []    [] [] [] []      []    []    []   | 63
+     xkeyboard-config   | []                    [] []                       | 22
+                        +---------------------------------------------------+
+       85 teams           sv  sw ta te tg th tr uk vi  wa zh_CN zh_HK zh_TW
+      178 domains         119  1  3  3  0 10 65 51 155 17  98     7    41    2618
+
+   Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect.  This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+   For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer.  There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+   If June 2010 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites.  The most up-to-date
+matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.5 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package.  Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library.  This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+   Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations.  The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project.  Therefore the information given above
+applies also for every other Free Software Project.  Contact
+`coordinator@translationproject.org' to make the `.pot' files available
+to the translation teams.
+
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..cb227f0
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,1313 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# This is a -*-Makefile-*-, or close enough
+#
+# Copyright (C) 1997-2016 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = make$(EXEEXT)
+# Only process if target is MS-Windows
+@WINDOWSENV_TRUE@am__append_1 = $(W32LIB)
+# Only process if target is MS-Windows
+@WINDOWSENV_TRUE@am__append_2 = $(W32INC)
+check_PROGRAMS = loadavg$(EXEEXT)
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 \
+	$(top_srcdir)/config/longlong.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(include_HEADERS) $(noinst_HEADERS) \
+	$(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = tests/config-flags.pm
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \
+	"$(DESTDIR)$(includedir)"
+PROGRAMS = $(bin_PROGRAMS)
+nodist_loadavg_OBJECTS = loadavg-getloadavg.$(OBJEXT)
+loadavg_OBJECTS = $(nodist_loadavg_OBJECTS)
+loadavg_DEPENDENCIES =
+am__make_SOURCES_DIST = ar.c arscan.c commands.c default.c dir.c \
+	expand.c file.c function.c getopt.c getopt1.c guile.c \
+	implicit.c job.c load.c loadapi.c main.c misc.c posixos.c \
+	output.c read.c remake.c rule.c signame.c strcache.c \
+	variable.c version.c vpath.c hash.c remote-stub.c \
+	remote-cstms.c
+@WINDOWSENV_FALSE@am__objects_1 = posixos.$(OBJEXT)
+@USE_CUSTOMS_FALSE@am__objects_2 = remote-stub.$(OBJEXT)
+@USE_CUSTOMS_TRUE@am__objects_2 = remote-cstms.$(OBJEXT)
+am_make_OBJECTS = ar.$(OBJEXT) arscan.$(OBJEXT) commands.$(OBJEXT) \
+	default.$(OBJEXT) dir.$(OBJEXT) expand.$(OBJEXT) \
+	file.$(OBJEXT) function.$(OBJEXT) getopt.$(OBJEXT) \
+	getopt1.$(OBJEXT) guile.$(OBJEXT) implicit.$(OBJEXT) \
+	job.$(OBJEXT) load.$(OBJEXT) loadapi.$(OBJEXT) main.$(OBJEXT) \
+	misc.$(OBJEXT) $(am__objects_1) output.$(OBJEXT) \
+	read.$(OBJEXT) remake.$(OBJEXT) rule.$(OBJEXT) \
+	signame.$(OBJEXT) strcache.$(OBJEXT) variable.$(OBJEXT) \
+	version.$(OBJEXT) vpath.$(OBJEXT) hash.$(OBJEXT) \
+	$(am__objects_2)
+make_OBJECTS = $(am_make_OBJECTS)
+am__DEPENDENCIES_1 =
+@WINDOWSENV_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1)
+make_DEPENDENCIES = @LIBOBJS@ @ALLOCA@ $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(nodist_loadavg_SOURCES) $(make_SOURCES) \
+	$(EXTRA_make_SOURCES)
+DIST_SOURCES = $(am__make_SOURCES_DIST) $(EXTRA_make_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+HEADERS = $(include_HEADERS) $(noinst_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = glob config po doc w32
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/config/ar-lib $(top_srcdir)/config/compile \
+	$(top_srcdir)/config/config.guess \
+	$(top_srcdir)/config/config.rpath \
+	$(top_srcdir)/config/config.sub $(top_srcdir)/config/depcomp \
+	$(top_srcdir)/config/install-sh $(top_srcdir)/config/missing \
+	$(top_srcdir)/tests/config-flags.pm.in ABOUT-NLS AUTHORS \
+	COPYING INSTALL NEWS README alloca.c getloadavg.c
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+DIST_TARGETS = dist-bzip2 dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = -DLOCALEDIR=\"$(localedir)\" -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+
+# --------------- Internationalization Section
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = dist-bzip2 silent-rules std-options
+ACLOCAL_AMFLAGS = -I config
+
+# Only process if target is MS-Windows
+@WINDOWSENV_TRUE@MAYBE_W32 = w32
+@WINDOWSENV_TRUE@W32INC = -I $(top_srcdir)/w32/include
+@WINDOWSENV_TRUE@W32LIB = -Lw32 -lw32
+@WINDOWSENV_FALSE@ossrc = posixos.c
+@WINDOWSENV_TRUE@ossrc = 
+SUBDIRS = glob config po doc $(MAYBE_W32)
+include_HEADERS = gnumake.h
+@USE_CUSTOMS_FALSE@remote = remote-stub.c
+@USE_CUSTOMS_TRUE@remote = remote-cstms.c
+make_SOURCES = ar.c arscan.c commands.c default.c dir.c expand.c file.c \
+		function.c getopt.c getopt1.c guile.c implicit.c job.c load.c \
+		loadapi.c main.c misc.c $(ossrc) output.c read.c remake.c \
+		rule.c signame.c strcache.c variable.c version.c vpath.c \
+		hash.c $(remote)
+
+EXTRA_make_SOURCES = vmsjobs.c remote-stub.c remote-cstms.c
+noinst_HEADERS = commands.h dep.h filedef.h job.h makeint.h rule.h variable.h \
+		debug.h getopt.h gettext.h hash.h output.h os.h
+
+make_LDADD = @LIBOBJS@ @ALLOCA@ $(GLOBLIB) @GETLOADAVG_LIBS@ @LIBINTL@ \
+	$(GUILE_LIBS) $(am__append_1)
+man_MANS = make.1
+AM_CPPFLAGS = $(GLOBINC) $(am__append_2)
+AM_CFLAGS = $(GUILE_CFLAGS)
+
+# Extra stuff to include in the distribution.
+EXTRA_DIST = ChangeLog README build.sh.in $(man_MANS) \
+		README.customs README.OS2 \
+		SCOPTIONS SMakefile \
+		README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h \
+		README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos\
+		README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat \
+		make_msvc_net2003.sln make_msvc_net2003.vcproj \
+		README.VMS makefile.vms makefile.com config.h-vms \
+		vmsdir.h vmsfunctions.c vmsify.c vms_exit.c vms_progname.c \
+		vms_export_symbol.c vms_export_symbol_test.com \
+		gmk-default.scm gmk-default.h
+
+
+# This is built during configure, but behind configure's back
+DISTCLEANFILES = build.sh
+
+# --------------- Local INSTALL Section
+
+# If necessary, change the gid of the app and turn on the setgid flag.
+#
+
+# Whether or not make needs to be installed setgid.
+# The value should be either 'true' or 'false'.
+# On many systems, the getloadavg function (used to implement the '-l'
+# switch) will not work unless make is installed setgid kmem.
+#
+inst_setgid = @NEED_SETGID@
+
+# Install make setgid to this group so it can get the load average.
+#
+inst_group = @KMEM_GROUP@
+nodist_loadavg_SOURCES = getloadavg.c
+loadavg_CPPFLAGS = -DTEST
+loadavg_LDADD = @GETLOADAVG_LIBS@
+
+# > check-regression
+#
+# Look for the make test suite, and run it if found and we can find perl.
+# If we're building outside the tree, we use symlinks to make a local copy of
+# the test suite.  Unfortunately the test suite itself isn't localizable yet.
+#
+MAKETESTFLAGS = 
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+tests/config-flags.pm: $(top_builddir)/config.status $(top_srcdir)/tests/config-flags.pm.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+installcheck-binPROGRAMS: $(bin_PROGRAMS)
+	bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \
+	  case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
+	   *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
+	  esac; \
+	  f=`echo "$$p" | \
+	     sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  for opt in --help --version; do \
+	    if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
+	         2>c$${pid}_.err </dev/null \
+		 && test -n "`cat c$${pid}_.out`" \
+		 && test -z "`cat c$${pid}_.err`"; then :; \
+	    else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
+	  done; \
+	done; rm -f c$${pid}_.???; exit $$bad
+
+clean-checkPROGRAMS:
+	-test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
+
+loadavg$(EXEEXT): $(loadavg_OBJECTS) $(loadavg_DEPENDENCIES) $(EXTRA_loadavg_DEPENDENCIES) 
+	@rm -f loadavg$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(loadavg_OBJECTS) $(loadavg_LDADD) $(LIBS)
+
+make$(EXEEXT): $(make_OBJECTS) $(make_DEPENDENCIES) $(EXTRA_make_DEPENDENCIES) 
+	@rm -f make$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(make_OBJECTS) $(make_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/alloca.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getloadavg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ar.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arscan.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/commands.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/default.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dir.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expand.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/function.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/guile.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/implicit.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/job.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/load.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loadapi.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loadavg-getloadavg.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posixos.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remake.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remote-cstms.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remote-stub.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rule.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signame.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strcache.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/variable.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vmsjobs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vpath.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+loadavg-getloadavg.o: getloadavg.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT loadavg-getloadavg.o -MD -MP -MF $(DEPDIR)/loadavg-getloadavg.Tpo -c -o loadavg-getloadavg.o `test -f 'getloadavg.c' || echo '$(srcdir)/'`getloadavg.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/loadavg-getloadavg.Tpo $(DEPDIR)/loadavg-getloadavg.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='getloadavg.c' object='loadavg-getloadavg.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o loadavg-getloadavg.o `test -f 'getloadavg.c' || echo '$(srcdir)/'`getloadavg.c
+
+loadavg-getloadavg.obj: getloadavg.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT loadavg-getloadavg.obj -MD -MP -MF $(DEPDIR)/loadavg-getloadavg.Tpo -c -o loadavg-getloadavg.obj `if test -f 'getloadavg.c'; then $(CYGPATH_W) 'getloadavg.c'; else $(CYGPATH_W) '$(srcdir)/getloadavg.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/loadavg-getloadavg.Tpo $(DEPDIR)/loadavg-getloadavg.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='getloadavg.c' object='loadavg-getloadavg.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o loadavg-getloadavg.obj `if test -f 'getloadavg.c'; then $(CYGPATH_W) 'getloadavg.c'; else $(CYGPATH_W) '$(srcdir)/getloadavg.c'; fi`
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(DEPDIR) ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-includeHEADERS install-man
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-exec-local
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am: installcheck-binPROGRAMS
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf $(DEPDIR) ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-man
+
+uninstall-man: uninstall-man1
+
+.MAKE: $(am__recursive_targets) all check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am check-local clean clean-binPROGRAMS \
+	clean-checkPROGRAMS clean-cscope clean-generic cscope \
+	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-compile \
+	distclean-generic distclean-hdr distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-exec-local install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-man install-man1 install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installcheck-binPROGRAMS \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-man uninstall-man1
+
+.PRECIOUS: Makefile
+
+
+install-exec-local:
+	@if $(inst_setgid); then \
+	   app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \
+	   if chgrp $(inst_group) $$app && chmod g+s $$app; then \
+	     echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \
+	   else \
+	     echo "$$app needs to be owned by group $(inst_group) and setgid;"; \
+	     echo "otherwise the '-l' option will probably not work."; \
+	     echo "You may need special privileges to complete the installation"; \
+	     echo "of $$app."; \
+	   fi; \
+	 else true; fi
+
+# --------------- Generate the Guile default module content
+
+guile.$(OBJEXT): gmk-default.h
+gmk-default.h: $(srcdir)/gmk-default.scm
+	(echo 'static const char *const GUILE_module_defn = " '\\ \
+	  && sed -e 's/;.*//' -e '/^[ \t]*$$/d' -e 's/"/\\"/g' -e 's/$$/ \\/' \
+		 $(srcdir)/gmk-default.scm \
+	  && echo '";') > $@
+
+# --------------- Local DIST Section
+
+# Install the w32 and tests subdirectories
+#
+dist-hook:
+	(cd $(srcdir); \
+	 sub=`find w32 tests -follow \( -name .git -o -name .deps -o -name work -o -name .gitignore -o -name \*.orig -o -name \*.rej -o -name \*~ -o -name Makefile \) -prune -o -type f -print`; \
+	 tar chf - $$sub) \
+	| (cd $(distdir); tar xfBp -)
+
+# --------------- Local CHECK Section
+
+check-local: check-regression check-loadavg
+	@banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \
+	dashes=`echo "$$banner" | sed s/./=/g`; \
+	echo; \
+	echo "$$dashes"; \
+	echo "$$banner"; \
+	echo "$$dashes"; \
+	echo
+
+.PHONY: check-loadavg check-regression
+
+check-loadavg: loadavg$(EXEEXT)
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code thinks:
+	-./loadavg$(EXEEXT)
+
+check-regression: tests/config-flags.pm
+	@if test -f '$(srcdir)/tests/run_make_tests'; then \
+	  ulimit -n 128; \
+	  if $(PERL) -v >/dev/null 2>&1; then \
+	    case `cd '$(srcdir)'; pwd` in `pwd`) : ;; \
+	      *) test -d tests || mkdir tests; \
+		 rm -f srctests; \
+		 if ln -s '$(srcdir)/tests' srctests; then \
+		   for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \
+		     rm -f tests/$$f; ln -s ../srctests/$$f tests; \
+		   done; fi ;; \
+	    esac; \
+	    echo "cd tests && $(PERL) ./run_make_tests.pl -srcdir $(abs_srcdir) -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \
+	    cd tests && $(PERL) ./run_make_tests.pl -srcdir '$(abs_srcdir)' -make '../make$(EXEEXT)' $(MAKETESTFLAGS); \
+	  else \
+	    echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \
+	  fi; \
+	else \
+	  echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \
+	fi
+
+# --------------- Maintainer's Section
+
+# Tell automake that I haven't forgotten about this file and it will be
+# created before we build a distribution (see maintMakefile in the Git
+# distribution).
+
+README:
+
+@MAINT_MAKEFILE@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..9a790c9
--- /dev/null
+++ b/README.md
@@ -0,0 +1,67 @@
+# GNU Make
+
+This is a fork of GNU Make, with support for running on Fuchsia.
+
+## Building
+
+To build a native version of GNU Make for fuchsia, configure in a new
+directory with:
+```
+  $ <path-to-make>/configure \
+          --host=<arch>-fuchsia \
+          CC=<path-to-compiler>/<arch>-fuchsia-gcc
+```
+  (where `<arch>` is one of: `x86_64`, `aarch64`, or `arm`)
+
+And then simply invoke 'make':
+```
+  $ make
+```
+
+## Rebasing GNU Make
+
+When merging upstream changes, there are a number of files that must be
+regenerated. Here are the steps to follow to regenerate the files from
+a virgin git repo (all commands shown should be run from within the
+source directory):
+
+1. Install the following packages:
+  * automake 1.15
+  * autoconf 2.69
+  * gettext 0.19.8
+  * pkg-config 0.29.1
+
+  These can mostly be installed into a user-specific directory to
+  avoid updating the default versions of these utilities. However,
+  if pkg-config is installed in a user-specific directory, you will
+  need to set the environment variable `ACLOCAL_PATH` to reference the
+  local "share" subdirectory to avoid getting undefined m4 macro
+  errors for `PKG_PROG_PKG_CONFIG`. For example, if pkg-config is
+  installed in `/my/usr/local`, `ACLOCAL_PATH` should be set to
+  `/my/usr/local/share`.
+
+2. Configure the make source directory.
+```
+  $ autoreconf -i
+```
+3. Run configure (we need a Makefile to download the latest versions of
+   some external files):
+```
+  $ ./configure
+```
+
+4. Download the necessary external files:
+```
+  $ make scm-update
+```
+
+5. Clean up our configure artifacts:
+```
+  $ make distclean
+  $ rm -fr autom4te.cache
+```
+
+After these steps, the source tree should be in a state where it can be
+configured/built as needed. Some of these steps are derived from (but
+differ slightly from) those given in `README.git`.
+
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..5389934
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1523 @@
+# generated automatically by aclocal 1.15 -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+dnl pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
+dnl serial 11 (pkg-config-0.29.1)
+dnl
+dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl     [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.1])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+    [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])dnl PKG_PROG_PKG_CONFIG
+
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])dnl _PKG_CONFIG
+
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
+
+
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])dnl PKG_CHECK_MODULES
+
+
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+    [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_INSTALLDIR
+
+
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+    [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_NOARCH_INSTALLDIR
+
+
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])dnl PKG_CHECK_VAR
+
+# Copyright (C) 2002-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.15], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# Copyright (C) 2011-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AR([ACT-IF-FAIL])
+# -------------------------
+# Try to determine the archiver interface, and trigger the ar-lib wrapper
+# if it is needed.  If the detection of archiver interface fails, run
+# ACT-IF-FAIL (default is to abort configure with a proper error message).
+AC_DEFUN([AM_PROG_AR],
+[AC_BEFORE([$0], [LT_INIT])dnl
+AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([ar-lib])dnl
+AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false])
+: ${AR=ar}
+
+AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface],
+  [AC_LANG_PUSH([C])
+   am_cv_ar_interface=ar
+   AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])],
+     [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([am_ar_try])
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+        AC_TRY_EVAL([am_ar_try])
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+     ])
+   AC_LANG_POP([C])])
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  m4_default([$1],
+             [AC_MSG_ERROR([could not determine $AR interface])])
+  ;;
+esac
+AC_SUBST([AR])dnl
+])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([AM_WITH_DMALLOC],
+[AC_MSG_CHECKING([if malloc debugging is wanted])
+AC_ARG_WITH([dmalloc],
+[AS_HELP_STRING([--with-dmalloc],
+                [use dmalloc, as in http://www.dmalloc.com])],
+[if test "$withval" = yes; then
+  AC_MSG_RESULT([yes])
+  AC_DEFINE([WITH_DMALLOC], [1],
+	    [Define if using the dmalloc debugging malloc package])
+  LIBS="$LIBS -ldmalloc"
+  LDFLAGS="$LDFLAGS -g"
+else
+  AC_MSG_RESULT([no])
+fi], [AC_MSG_RESULT([no])])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2014 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([config/dospaths.m4])
+m4_include([config/gettext.m4])
+m4_include([config/iconv.m4])
+m4_include([config/intlmacosx.m4])
+m4_include([config/lib-ld.m4])
+m4_include([config/lib-link.m4])
+m4_include([config/lib-prefix.m4])
+m4_include([config/longlong.m4])
+m4_include([config/nls.m4])
+m4_include([config/po.m4])
+m4_include([config/progtest.m4])
+m4_include([acinclude.m4])
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..437a608
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,509 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if the `closedir' function returns void instead of `int'. */
+#undef CLOSEDIR_VOID
+
+/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
+   systems. This function is required for `alloca.c' support on those systems.
+   */
+#undef CRAY_STACKSEG_END
+
+/* Define to 1 if using `alloca.c'. */
+#undef C_ALLOCA
+
+/* Define to 1 if using `getloadavg.c'. */
+#undef C_GETLOADAVG
+
+/* Define to 1 for DGUX with <sys/dg_sys_info.h>. */
+#undef DGUX
+
+/* Define to 1 if translation of program messages to the user's native
+   language is requested. */
+#undef ENABLE_NLS
+
+/* Use high resolution file timestamps if nonzero. */
+#undef FILE_TIMESTAMP_HI_RES
+
+/* Define to 1 if the `getloadavg' function needs to be run setuid or setgid.
+   */
+#undef GETLOADAVG_PRIVILEGED
+
+/* Define to 1 if you have `alloca', as a function or macro. */
+#undef HAVE_ALLOCA
+
+/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
+   */
+#undef HAVE_ALLOCA_H
+
+/* Define to 1 if you have the `atexit' function. */
+#undef HAVE_ATEXIT
+
+/* Use case insensitive file names */
+#undef HAVE_CASE_INSENSITIVE_FS
+
+/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the
+   CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYCURRENT
+
+/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
+   the CoreFoundation framework. */
+#undef HAVE_CFPREFERENCESCOPYAPPVALUE
+
+/* Define to 1 if you have the clock_gettime function. */
+#undef HAVE_CLOCK_GETTIME
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+   */
+#undef HAVE_DCGETTEXT
+
+/* Define to 1 if you have the declaration of `bsd_signal', and to 0 if you
+   don't. */
+#undef HAVE_DECL_BSD_SIGNAL
+
+/* Define to 1 if you have the declaration of `dlerror', and to 0 if you
+   don't. */
+#undef HAVE_DECL_DLERROR
+
+/* Define to 1 if you have the declaration of `dlopen', and to 0 if you don't.
+   */
+#undef HAVE_DECL_DLOPEN
+
+/* Define to 1 if you have the declaration of `dlsym', and to 0 if you don't.
+   */
+#undef HAVE_DECL_DLSYM
+
+/* Define to 1 if you have the declaration of `sys_siglist', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SYS_SIGLIST
+
+/* Define to 1 if you have the declaration of `_sys_siglist', and to 0 if you
+   don't. */
+#undef HAVE_DECL__SYS_SIGLIST
+
+/* Define to 1 if you have the declaration of `__sys_siglist', and to 0 if you
+   don't. */
+#undef HAVE_DECL___SYS_SIGLIST
+
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_DIRENT_H
+
+/* Use platform specific coding */
+#undef HAVE_DOS_PATHS
+
+/* Define to 1 if you have the `dup' function. */
+#undef HAVE_DUP
+
+/* Define to 1 if you have the `dup2' function. */
+#undef HAVE_DUP2
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the `fdopen' function. */
+#undef HAVE_FDOPEN
+
+/* Define to 1 if you have the `fileno' function. */
+#undef HAVE_FILENO
+
+/* Define to 1 if you have the `fork' function. */
+#undef HAVE_FORK
+
+/* Define to 1 if you have the `getcwd' function. */
+#undef HAVE_GETCWD
+
+/* Define to 1 if you have the `getgroups' function. */
+#undef HAVE_GETGROUPS
+
+/* Define to 1 if you have the `gethostbyname' function. */
+#undef HAVE_GETHOSTBYNAME
+
+/* Define to 1 if you have the `gethostname' function. */
+#undef HAVE_GETHOSTNAME
+
+/* Define to 1 if you have the `getloadavg' function. */
+#undef HAVE_GETLOADAVG
+
+/* Define to 1 if you have the `getrlimit' function. */
+#undef HAVE_GETRLIMIT
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define to 1 if you have a standard gettimeofday function */
+#undef HAVE_GETTIMEOFDAY
+
+/* Embed GNU Guile support */
+#undef HAVE_GUILE
+
+/* Define if you have the iconv() function and it works. */
+#undef HAVE_ICONV
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `isatty' function. */
+#undef HAVE_ISATTY
+
+/* Define to 1 if you have the `dgc' library (-ldgc). */
+#undef HAVE_LIBDGC
+
+/* Define to 1 if you have the `kstat' library (-lkstat). */
+#undef HAVE_LIBKSTAT
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `lstat' function. */
+#undef HAVE_LSTAT
+
+/* Define to 1 if you have the <mach/mach.h> header file. */
+#undef HAVE_MACH_MACH_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `mkstemp' function. */
+#undef HAVE_MKSTEMP
+
+/* Define to 1 if you have the `mktemp' function. */
+#undef HAVE_MKTEMP
+
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the <nlist.h> header file. */
+#undef HAVE_NLIST_H
+
+/* Define to 1 if you have the `pipe' function. */
+#undef HAVE_PIPE
+
+/* Define to 1 if you have the `pselect' function. */
+#undef HAVE_PSELECT
+
+/* Define to 1 if you have the `pstat_getdynamic' function. */
+#undef HAVE_PSTAT_GETDYNAMIC
+
+/* Define to 1 if you have the `readlink' function. */
+#undef HAVE_READLINK
+
+/* Define to 1 if you have the `realpath' function. */
+#undef HAVE_REALPATH
+
+/* Define to 1 if <signal.h> defines the SA_RESTART constant. */
+#undef HAVE_SA_RESTART
+
+/* Define to 1 if you have the `setegid' function. */
+#undef HAVE_SETEGID
+
+/* Define to 1 if you have the `seteuid' function. */
+#undef HAVE_SETEUID
+
+/* Define to 1 if you have the `setlinebuf' function. */
+#undef HAVE_SETLINEBUF
+
+/* Define to 1 if you have the `setlocale' function. */
+#undef HAVE_SETLOCALE
+
+/* Define to 1 if you have the `setregid' function. */
+#undef HAVE_SETREGID
+
+/* Define to 1 if you have the `setreuid' function. */
+#undef HAVE_SETREUID
+
+/* Define to 1 if you have the `setrlimit' function. */
+#undef HAVE_SETRLIMIT
+
+/* Define to 1 if you have the `setvbuf' function. */
+#undef HAVE_SETVBUF
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if you have the `sigsetmask' function. */
+#undef HAVE_SIGSETMASK
+
+/* Define to 1 if you have the `socket' function. */
+#undef HAVE_SOCKET
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strcasecmp' function. */
+#undef HAVE_STRCASECMP
+
+/* Define to 1 if you have the `strcmpi' function. */
+#undef HAVE_STRCMPI
+
+/* Define to 1 if you have the `strcoll' function and it is properly defined.
+   */
+#undef HAVE_STRCOLL
+
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the `stricmp' function. */
+#undef HAVE_STRICMP
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strncasecmp' function. */
+#undef HAVE_STRNCASECMP
+
+/* Define to 1 if you have the `strncmpi' function. */
+#undef HAVE_STRNCMPI
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnicmp' function. */
+#undef HAVE_STRNICMP
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if `n_un.n_name' is a member of `struct nlist'. */
+#undef HAVE_STRUCT_NLIST_N_UN_N_NAME
+
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_DIR_H
+
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+   */
+#undef HAVE_SYS_NDIR_H
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/resource.h> header file. */
+#undef HAVE_SYS_RESOURCE_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/timeb.h> header file. */
+#undef HAVE_SYS_TIMEB_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/wait.h> header file. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the `ttyname' function. */
+#undef HAVE_TTYNAME
+
+/* Define to 1 if the system has the type `uintmax_t'. */
+#undef HAVE_UINTMAX_T
+
+/* Define to 1 if you have the `umask' function. */
+#undef HAVE_UMASK
+
+/* Define to 1 if you have the 'union wait' type in <sys/wait.h>. */
+#undef HAVE_UNION_WAIT
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if the system has the type 'unsigned long long int'. */
+#undef HAVE_UNSIGNED_LONG_LONG_INT
+
+/* Define to 1 if you have the `vfork' function. */
+#undef HAVE_VFORK
+
+/* Define to 1 if you have the <vfork.h> header file. */
+#undef HAVE_VFORK_H
+
+/* Define to 1 if you have the `wait3' function. */
+#undef HAVE_WAIT3
+
+/* Define to 1 if you have the `waitpid' function. */
+#undef HAVE_WAITPID
+
+/* Define to 1 if `fork' works. */
+#undef HAVE_WORKING_FORK
+
+/* Define to 1 if `vfork' works. */
+#undef HAVE_WORKING_VFORK
+
+/* Build host information. */
+#undef MAKE_HOST
+
+/* Define to 1 to enable job server support in GNU make. */
+#undef MAKE_JOBSERVER
+
+/* Define to 1 to enable 'load' support in GNU make. */
+#undef MAKE_LOAD
+
+/* Define to 1 to enable symbolic link timestamp checking. */
+#undef MAKE_SYMLINKS
+
+/* Define to 1 if your `struct nlist' has an `n_un' member. Obsolete, depend
+   on `HAVE_STRUCT_NLIST_N_UN_N_NAME */
+#undef NLIST_NAME_UNION
+
+/* Define to 1 if struct nlist.n_name is a pointer rather than an array. */
+#undef NLIST_STRUCT
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to the character that separates directories in PATH. */
+#undef PATH_SEPARATOR_CHAR
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#undef RETSIGTYPE
+
+/* Define to the name of the SCCS 'get' command. */
+#undef SCCS_GET
+
+/* Define to 1 if the SCCS 'get' command understands the '-G<file>' option. */
+#undef SCCS_GET_MINUS_G
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at runtime.
+	STACK_DIRECTION > 0 => grows toward higher addresses
+	STACK_DIRECTION < 0 => grows toward lower addresses
+	STACK_DIRECTION = 0 => direction of growth unknown */
+#undef STACK_DIRECTION
+
+/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+#undef STAT_MACROS_BROKEN
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define if struct stat contains a nanoseconds field */
+#undef ST_MTIM_NSEC
+
+/* Define to 1 on System V Release 4. */
+#undef SVR4
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define to 1 for Encore UMAX. */
+#undef UMAX
+
+/* Define to 1 for Encore UMAX 4.3 that has <inq_status/cpustats.h> instead of
+   <sys/cpustats.h>. */
+#undef UMAX4_3
+
+/* Enable extensions on AIX 3, Interix.  */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them.  */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris.  */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop.  */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Version number of package */
+#undef VERSION
+
+/* Use platform specific coding */
+#undef WINDOWS32
+
+/* Define if using the dmalloc debugging malloc package */
+#undef WITH_DMALLOC
+
+/* Enable large inode numbers on Mac OS X 10.5.  */
+#ifndef _DARWIN_USE_64_BIT_INODE
+# define _DARWIN_USE_64_BIT_INODE 1
+#endif
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef gid_t
+
+/* Define to `long int' if <sys/types.h> does not define. */
+#undef off_t
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef ssize_t
+
+/* Define to `int' if <sys/types.h> doesn't define. */
+#undef uid_t
+
+/* Define to the widest unsigned integer type if <stdint.h> and <inttypes.h>
+   do not define. */
+#undef uintmax_t
+
+/* Define as `fork' if `vfork' does not work. */
+#undef vfork
diff --git a/config/.gitignore b/config/.gitignore
index d11a488..f66f65f 100644
--- a/config/.gitignore
+++ b/config/.gitignore
@@ -1,12 +1 @@
-ar-lib
-compile
-config.guess
-config.rpath
-config.sub
-depcomp
-install-sh
-mdate-sh
-missing
-texinfo.tex
-*.m4
 !dospaths.m4
diff --git a/config/Makefile.in b/config/Makefile.in
new file mode 100644
index 0000000..57fbfe3
--- /dev/null
+++ b/config/Makefile.in
@@ -0,0 +1,468 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*-Makefile-*-, or close enough
+# Copyright (C) 2002-2016 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 3 of the License, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = config
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 \
+	$(top_srcdir)/config/longlong.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in ar-lib compile config.guess \
+	config.rpath config.sub depcomp install-sh missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign config/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign config/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+	ctags-am distclean distclean-generic distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Autoconf / automake know how to handle this directory.
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/config/ar-lib b/config/ar-lib
new file mode 100755
index 0000000..463b9ec
--- /dev/null
+++ b/config/ar-lib
@@ -0,0 +1,270 @@
+#! /bin/sh
+# Wrapper for Microsoft lib.exe
+
+me=ar-lib
+scriptversion=2012-03-01.08; # UTC
+
+# Copyright (C) 2010-2014 Free Software Foundation, Inc.
+# Written by Peter Rosin <peda@lysator.liu.se>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+
+# func_error message
+func_error ()
+{
+  echo "$me: $1" 1>&2
+  exit 1
+}
+
+file_conv=
+
+# func_file_conv build_file
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv in
+	mingw)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_at_file at_file operation archive
+# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
+# for each of them.
+# When interpreting the content of the @FILE, do NOT use func_file_conv,
+# since the user would need to supply preconverted file names to
+# binutils ar, at least for MinGW.
+func_at_file ()
+{
+  operation=$2
+  archive=$3
+  at_file_contents=`cat "$1"`
+  eval set x "$at_file_contents"
+  shift
+
+  for member
+  do
+    $AR -NOLOGO $operation:"$member" "$archive" || exit $?
+  done
+}
+
+case $1 in
+  '')
+     func_error "no command.  Try '$0 --help' for more information."
+     ;;
+  -h | --h*)
+    cat <<EOF
+Usage: $me [--help] [--version] PROGRAM ACTION ARCHIVE [MEMBER...]
+
+Members may be specified in a file named with @FILE.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "$me, version $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test $# -lt 3; then
+  func_error "you must specify a program, an action and an archive"
+fi
+
+AR=$1
+shift
+while :
+do
+  if test $# -lt 2; then
+    func_error "you must specify a program, an action and an archive"
+  fi
+  case $1 in
+    -lib | -LIB \
+    | -ltcg | -LTCG \
+    | -machine* | -MACHINE* \
+    | -subsystem* | -SUBSYSTEM* \
+    | -verbose | -VERBOSE \
+    | -wx* | -WX* )
+      AR="$AR $1"
+      shift
+      ;;
+    *)
+      action=$1
+      shift
+      break
+      ;;
+  esac
+done
+orig_archive=$1
+shift
+func_file_conv "$orig_archive"
+archive=$file
+
+# strip leading dash in $action
+action=${action#-}
+
+delete=
+extract=
+list=
+quick=
+replace=
+index=
+create=
+
+while test -n "$action"
+do
+  case $action in
+    d*) delete=yes  ;;
+    x*) extract=yes ;;
+    t*) list=yes    ;;
+    q*) quick=yes   ;;
+    r*) replace=yes ;;
+    s*) index=yes   ;;
+    S*)             ;; # the index is always updated implicitly
+    c*) create=yes  ;;
+    u*)             ;; # TODO: don't ignore the update modifier
+    v*)             ;; # TODO: don't ignore the verbose modifier
+    *)
+      func_error "unknown action specified"
+      ;;
+  esac
+  action=${action#?}
+done
+
+case $delete$extract$list$quick$replace,$index in
+  yes,* | ,yes)
+    ;;
+  yesyes*)
+    func_error "more than one action specified"
+    ;;
+  *)
+    func_error "no action specified"
+    ;;
+esac
+
+if test -n "$delete"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  for member
+  do
+    case $1 in
+      @*)
+        func_at_file "${1#@}" -REMOVE "$archive"
+        ;;
+      *)
+        func_file_conv "$1"
+        $AR -NOLOGO -REMOVE:"$file" "$archive" || exit $?
+        ;;
+    esac
+  done
+
+elif test -n "$extract"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  if test $# -gt 0; then
+    for member
+    do
+      case $1 in
+        @*)
+          func_at_file "${1#@}" -EXTRACT "$archive"
+          ;;
+        *)
+          func_file_conv "$1"
+          $AR -NOLOGO -EXTRACT:"$file" "$archive" || exit $?
+          ;;
+      esac
+    done
+  else
+    $AR -NOLOGO -LIST "$archive" | sed -e 's/\\/\\\\/g' | while read member
+    do
+      $AR -NOLOGO -EXTRACT:"$member" "$archive" || exit $?
+    done
+  fi
+
+elif test -n "$quick$replace"; then
+  if test ! -f "$orig_archive"; then
+    if test -z "$create"; then
+      echo "$me: creating $orig_archive"
+    fi
+    orig_archive=
+  else
+    orig_archive=$archive
+  fi
+
+  for member
+  do
+    case $1 in
+    @*)
+      func_file_conv "${1#@}"
+      set x "$@" "@$file"
+      ;;
+    *)
+      func_file_conv "$1"
+      set x "$@" "$file"
+      ;;
+    esac
+    shift
+    shift
+  done
+
+  if test -n "$orig_archive"; then
+    $AR -NOLOGO -OUT:"$archive" "$orig_archive" "$@" || exit $?
+  else
+    $AR -NOLOGO -OUT:"$archive" "$@" || exit $?
+  fi
+
+elif test -n "$list"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  $AR -NOLOGO -LIST "$archive" || exit $?
+fi
diff --git a/config/codeset.m4 b/config/codeset.m4
new file mode 100644
index 0000000..d7de8d6
--- /dev/null
+++ b/config/codeset.m4
@@ -0,0 +1,23 @@
+# codeset.m4 serial 5 (gettext-0.18.2)
+dnl Copyright (C) 2000-2002, 2006, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+  AC_CACHE_CHECK([for nl_langinfo and CODESET], [am_cv_langinfo_codeset],
+    [AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <langinfo.h>]],
+          [[char* cs = nl_langinfo(CODESET); return !cs;]])],
+       [am_cv_langinfo_codeset=yes],
+       [am_cv_langinfo_codeset=no])
+    ])
+  if test $am_cv_langinfo_codeset = yes; then
+    AC_DEFINE([HAVE_LANGINFO_CODESET], [1],
+      [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+  fi
+])
diff --git a/config/compile b/config/compile
new file mode 100755
index 0000000..a85b723
--- /dev/null
+++ b/config/compile
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/config.guess b/config/config.guess
new file mode 100644
index 0000000..bbd48b6
--- /dev/null
+++ b/config/config.guess
@@ -0,0 +1,1462 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2017 Free Software Foundation, Inc.
+
+timestamp='2017-01-01'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2017 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+	    /sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || \
+	    echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    earmv*)
+		arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+		endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
+		machine=${arch}${endian}-unknown
+		;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently (or will in the future) and ABI.
+	case "${UNAME_MACHINE_ARCH}" in
+	    earm*)
+		os=netbsdelf
+		;;
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# Determine ABI tags.
+	case "${UNAME_MACHINE_ARCH}" in
+	    earm*)
+		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+		abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}${abi}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:LibertyBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:Sortix:*:*)
+	echo ${UNAME_MACHINE}-unknown-sortix
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE=alpha ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE=alphaev5 ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE=alphaev56 ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE=alphapca56 ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE=alphapca57 ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE=alphaev6 ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE=alphaev67 ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE=alphaev69 ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE=alphaev7 ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE=alphaev79 ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH=i386
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH=x86_64
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/lslpp ] ; then
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH=hppa2.0n ;;
+			  64) HP_ARCH=hppa2.0w ;;
+			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = hppa2.0w ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH=hppa2.0w
+	    else
+		HP_ARCH=hppa64
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    *:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    cris:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    crisv32:Linux:*:*)
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    e2k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    frv:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:Linux:*:*)
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    k1om:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+	;;
+    mips64el:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-${LIBC}
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-${LIBC}
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
+	exit ;;
+    riscv32:Linux:*:* | riscv64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+	exit ;;
+    x86_64:Linux:*:*)
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configure will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-ACE:SUPER-UX:*:*)
+	echo sxace-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+	    if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		    (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		    grep IS_64BIT_ARCH >/dev/null
+		then
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = x86; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = 386; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'`
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
+    amd64:Isilon\ OneFS:*:*)
+	echo x86_64-unknown-onefs
+	exit ;;
+esac
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite
+config.guess and config.sub with the latest versions from:
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config/config.rpath b/config/config.rpath
new file mode 100755
index 0000000..b625621
--- /dev/null
+++ b/config/config.rpath
@@ -0,0 +1,684 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+#   Copyright 1996-2014 Free Software Foundation, Inc.
+#   Taken from GNU libtool, 2001
+#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+#   This file is free software; the Free Software Foundation gives
+#   unlimited permission to copy and/or distribute it, with or without
+#   modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+#   than 256 bytes, otherwise the compiler driver will dump core. The only
+#   known workaround is to choose shorter directory names for the build
+#   directory and/or the installation directory.
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+  wl='-Wl,'
+else
+  case "$host_os" in
+    aix*)
+      wl='-Wl,'
+      ;;
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      wl='-Wl,'
+      ;;
+    irix5* | irix6* | nonstopux*)
+      wl='-Wl,'
+      ;;
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+        ecc*)
+          wl='-Wl,'
+          ;;
+        icc* | ifort*)
+          wl='-Wl,'
+          ;;
+        lf95*)
+          wl='-Wl,'
+          ;;
+        nagfor*)
+          wl='-Wl,-Wl,,'
+          ;;
+        pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+          wl='-Wl,'
+          ;;
+        ccc*)
+          wl='-Wl,'
+          ;;
+        xl* | bgxl* | bgf* | mpixl*)
+          wl='-Wl,'
+          ;;
+        como)
+          wl='-lopt='
+          ;;
+        *)
+          case `$CC -V 2>&1 | sed 5q` in
+            *Sun\ F* | *Sun*Fortran*)
+              wl=
+              ;;
+            *Sun\ C*)
+              wl='-Wl,'
+              ;;
+          esac
+          ;;
+      esac
+      ;;
+    newsos6)
+      ;;
+    *nto* | *qnx*)
+      ;;
+    osf3* | osf4* | osf5*)
+      wl='-Wl,'
+      ;;
+    rdos*)
+      ;;
+    solaris*)
+      case $cc_basename in
+        f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+          wl='-Qoption ld '
+          ;;
+        *)
+          wl='-Wl,'
+          ;;
+      esac
+      ;;
+    sunos4*)
+      wl='-Qoption ld '
+      ;;
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      wl='-Wl,'
+      ;;
+    sysv4*MP*)
+      ;;
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      wl='-Wl,'
+      ;;
+    unicos*)
+      wl='-Wl,'
+      ;;
+    uts4*)
+      ;;
+  esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # Set some defaults for GNU ld with shared library support. These
+  # are reset later if shared libraries are not supported. Putting them
+  # here allows them to be overridden if necessary.
+  # Unlike libtool, we use -rpath here, not --rpath, since the documented
+  # option of GNU ld is called -rpath, not --rpath.
+  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+  case "$host_os" in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+        ld_shlibs=no
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    haiku*)
+      ;;
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      ;;
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    netbsd*)
+      ;;
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+        ld_shlibs=no
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+          ld_shlibs=no
+          ;;
+        *)
+          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+          else
+            ld_shlibs=no
+          fi
+          ;;
+      esac
+      ;;
+    sunos4*)
+      hardcode_direct=yes
+      ;;
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+  esac
+  if test "$ld_shlibs" = no; then
+    hardcode_libdir_flag_spec=
+  fi
+else
+  case "$host_os" in
+    aix3*)
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes; then
+        # Neither direct hardcoding nor static linking is supported with a
+        # broken collect2.
+        hardcode_direct=unsupported
+      fi
+      ;;
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+        # On IA64, the linker does run time linking by default, so we don't
+        # have to do anything special.
+        aix_use_runtimelinking=no
+      else
+        aix_use_runtimelinking=no
+        # Test if we are trying to use run time linking or normal
+        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+        # need to do runtime linking.
+        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+          for ld_flag in $LDFLAGS; do
+            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+              aix_use_runtimelinking=yes
+              break
+            fi
+          done
+          ;;
+        esac
+      fi
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      if test "$GCC" = yes; then
+        case $host_os in aix4.[012]|aix4.[012].*)
+          collect2name=`${CC} -print-prog-name=collect2`
+          if test -f "$collect2name" && \
+            strings "$collect2name" | grep resolve_lib_name >/dev/null
+          then
+            # We have reworked collect2
+            :
+          else
+            # We have old collect2
+            hardcode_direct=unsupported
+            hardcode_minus_L=yes
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_libdir_separator=
+          fi
+          ;;
+        esac
+      fi
+      # Begin _LT_AC_SYS_LIBPATH_AIX.
+      echo 'int main () { return 0; }' > conftest.c
+      ${CC} ${LDFLAGS} conftest.c -o conftest
+      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      if test -z "$aix_libpath"; then
+        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      fi
+      if test -z "$aix_libpath"; then
+        aix_libpath="/usr/lib:/lib"
+      fi
+      rm -f conftest.c conftest
+      # End _LT_AC_SYS_LIBPATH_AIX.
+      if test "$aix_use_runtimelinking" = yes; then
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+      else
+        if test "$host_cpu" = ia64; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+        else
+          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        fi
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    bsdi[45]*)
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      libext=lib
+      ;;
+    darwin* | rhapsody*)
+      hardcode_direct=no
+      if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    dgux*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    freebsd2.[01]*)
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    freebsd* | dragonfly*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    hpux9*)
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      ;;
+    hpux10*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        hardcode_direct=yes
+        # hardcode_minus_L: Not really in the search PATH,
+        # but as the default location of the library.
+        hardcode_minus_L=yes
+      fi
+      ;;
+    hpux11*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct=no
+            ;;
+          *)
+            hardcode_direct=yes
+            # hardcode_minus_L: Not really in the search PATH,
+            # but as the default location of the library.
+            hardcode_minus_L=yes
+            ;;
+        esac
+      fi
+      ;;
+    irix5* | irix6* | nonstopux*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    netbsd*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    newsos6)
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    *nto* | *qnx*)
+      ;;
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+        hardcode_direct=yes
+        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        else
+          case "$host_os" in
+            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+              hardcode_libdir_flag_spec='-R$libdir'
+              ;;
+            *)
+              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+              ;;
+          esac
+        fi
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      ;;
+    osf3*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    osf4* | osf5*)
+      if test "$GCC" = yes; then
+        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+        # Both cc and cxx compiler support -rpath directly
+        hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+    solaris*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      ;;
+    sunos4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    sysv4)
+      case $host_vendor in
+        sni)
+          hardcode_direct=yes # is this really true???
+          ;;
+        siemens)
+          hardcode_direct=no
+          ;;
+        motorola)
+          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+          ;;
+      esac
+      ;;
+    sysv4.3*)
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        ld_shlibs=yes
+      fi
+      ;;
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      ;;
+    sysv5* | sco3.2v5* | sco5v6*)
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      ;;
+    uts4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    *)
+      ld_shlibs=no
+      ;;
+  esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec=      # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+  aix3*)
+    library_names_spec='$libname.a'
+    ;;
+  aix[4-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  amigaos*)
+    case "$host_cpu" in
+      powerpc*)
+        library_names_spec='$libname$shrext' ;;
+      m68k)
+        library_names_spec='$libname.a' ;;
+    esac
+    ;;
+  beos*)
+    library_names_spec='$libname$shrext'
+    ;;
+  bsdi[45]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  cygwin* | mingw* | pw32* | cegcc*)
+    shrext=.dll
+    library_names_spec='$libname.dll.a $libname.lib'
+    ;;
+  darwin* | rhapsody*)
+    shrext=.dylib
+    library_names_spec='$libname$shrext'
+    ;;
+  dgux*)
+    library_names_spec='$libname$shrext'
+    ;;
+  freebsd[23].*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  freebsd* | dragonfly*)
+    library_names_spec='$libname$shrext'
+    ;;
+  gnu*)
+    library_names_spec='$libname$shrext'
+    ;;
+  haiku*)
+    library_names_spec='$libname$shrext'
+    ;;
+  hpux9* | hpux10* | hpux11*)
+    case $host_cpu in
+      ia64*)
+        shrext=.so
+        ;;
+      hppa*64*)
+        shrext=.sl
+        ;;
+      *)
+        shrext=.sl
+        ;;
+    esac
+    library_names_spec='$libname$shrext'
+    ;;
+  interix[3-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  irix5* | irix6* | nonstopux*)
+    library_names_spec='$libname$shrext'
+    case "$host_os" in
+      irix5* | nonstopux*)
+        libsuff= shlibsuff=
+        ;;
+      *)
+        case $LD in
+          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+          *) libsuff= shlibsuff= ;;
+        esac
+        ;;
+    esac
+    ;;
+  linux*oldld* | linux*aout* | linux*coff*)
+    ;;
+  linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  knetbsd*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  netbsd*)
+    library_names_spec='$libname$shrext'
+    ;;
+  newsos6)
+    library_names_spec='$libname$shrext'
+    ;;
+  *nto* | *qnx*)
+    library_names_spec='$libname$shrext'
+    ;;
+  openbsd*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  os2*)
+    libname_spec='$name'
+    shrext=.dll
+    library_names_spec='$libname.a'
+    ;;
+  osf3* | osf4* | osf5*)
+    library_names_spec='$libname$shrext'
+    ;;
+  rdos*)
+    ;;
+  solaris*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sunos4*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  sysv4 | sysv4.3*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv4*MP*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    library_names_spec='$libname$shrext'
+    ;;
+  tpf*)
+    library_names_spec='$libname$shrext'
+    ;;
+  uts4*)
+    library_names_spec='$libname$shrext'
+    ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff --git a/config/config.sub b/config/config.sub
new file mode 100644
index 0000000..7e792b4
--- /dev/null
+++ b/config/config.sub
@@ -0,0 +1,1828 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2017 Free Software Foundation, Inc.
+
+timestamp='2017-01-01'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2017 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+  kopensolaris*-gnu* | cloudabi*-eabi* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze*)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| aarch64 | aarch64_be \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| ba \
+	| be32 | be64 \
+	| bfin \
+	| c4x | c8051 | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| e2k | epiphany \
+	| fido | fr30 | frv | ft32 \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| k1om \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
+	| ns16k | ns32k \
+	| open8 | or1k | or1knd | or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pru \
+	| pyramid \
+	| riscv32 | riscv64 \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| visium \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	leon|leon[3-9])
+		basic_machine=sparc-$basic_machine
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| aarch64-* | aarch64_be-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| ba-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| e2k-* | elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| k1om-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| or1k*-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pru-* \
+	| pyramid-* \
+	| riscv32-* | riscv64-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| visium-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	asmjs)
+		basic_machine=asmjs-unknown
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	e500v[12])
+		basic_machine=powerpc-unknown
+		os=$os"spe"
+		;;
+	e500v[12]-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=$os"spe"
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	leon-*|leon[3-9]-*)
+		basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze*)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
+	mingw32)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i686-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* | -cloudabi* | -sortix* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+	      | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-ios)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	c8051-*)
+		os=-elf
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	pru-*)
+		os=-elf
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config/depcomp b/config/depcomp
new file mode 100755
index 0000000..fc98710
--- /dev/null
+++ b/config/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2013-05-30.07; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/extern-inline.m4 b/config/extern-inline.m4
new file mode 100644
index 0000000..0edbe3c
--- /dev/null
+++ b/config/extern-inline.m4
@@ -0,0 +1,100 @@
+dnl 'extern inline' a la ISO C99.
+
+dnl Copyright 2012-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_EXTERN_INLINE],
+[
+  AH_VERBATIM([extern_inline],
+[/* Please see the Gnulib manual for how to use these macros.
+
+   Suppress extern inline with HP-UX cc, as it appears to be broken; see
+   <http://lists.gnu.org/archive/html/bug-texinfo/2013-02/msg00030.html>.
+
+   Suppress extern inline with Sun C in standards-conformance mode, as it
+   mishandles inline functions that call each other.  E.g., for 'inline void f
+   (void) { } inline void g (void) { f (); }', c99 incorrectly complains
+   'reference to static identifier "f" in extern inline function'.
+   This bug was observed with Sun C 5.12 SunOS_i386 2011/11/16.
+
+   Suppress extern inline (with or without __attribute__ ((__gnu_inline__)))
+   on configurations that mistakenly use 'static inline' to implement
+   functions or macros in standard C headers like <ctype.h>.  For example,
+   if isdigit is mistakenly implemented via a static inline function,
+   a program containing an extern inline function that calls isdigit
+   may not work since the C standard prohibits extern inline functions
+   from calling static functions.  This bug is known to occur on:
+
+     OS X 10.8 and earlier; see:
+     http://lists.gnu.org/archive/html/bug-gnulib/2012-12/msg00023.html
+
+     DragonFly; see
+     http://muscles.dragonflybsd.org/bulk/bleeding-edge-potential/latest-per-pkg/ah-tty-0.3.12.log
+
+     FreeBSD; see:
+     http://lists.gnu.org/archive/html/bug-gnulib/2014-07/msg00104.html
+
+   OS X 10.9 has a macro __header_inline indicating the bug is fixed for C and
+   for clang but remains for g++; see <http://trac.macports.org/ticket/41033>.
+   Assume DragonFly and FreeBSD will be similar.  */
+#if (((defined __APPLE__ && defined __MACH__) \
+      || defined __DragonFly__ || defined __FreeBSD__) \
+     && (defined __header_inline \
+         ? (defined __cplusplus && defined __GNUC_STDC_INLINE__ \
+            && ! defined __clang__) \
+         : ((! defined _DONT_USE_CTYPE_INLINE_ \
+             && (defined __GNUC__ || defined __cplusplus)) \
+            || (defined _FORTIFY_SOURCE && 0 < _FORTIFY_SOURCE \
+                && defined __GNUC__ && ! defined __cplusplus))))
+# define _GL_EXTERN_INLINE_STDHEADER_BUG
+#endif
+#if ((__GNUC__ \
+      ? defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__ \
+      : (199901L <= __STDC_VERSION__ \
+         && !defined __HP_cc \
+         && !(defined __SUNPRO_C && __STDC__))) \
+     && !defined _GL_EXTERN_INLINE_STDHEADER_BUG)
+# define _GL_INLINE inline
+# define _GL_EXTERN_INLINE extern inline
+# define _GL_EXTERN_INLINE_IN_USE
+#elif (2 < __GNUC__ + (7 <= __GNUC_MINOR__) && !defined __STRICT_ANSI__ \
+       && !defined _GL_EXTERN_INLINE_STDHEADER_BUG)
+# if defined __GNUC_GNU_INLINE__ && __GNUC_GNU_INLINE__
+   /* __gnu_inline__ suppresses a GCC 4.2 diagnostic.  */
+#  define _GL_INLINE extern inline __attribute__ ((__gnu_inline__))
+# else
+#  define _GL_INLINE extern inline
+# endif
+# define _GL_EXTERN_INLINE extern
+# define _GL_EXTERN_INLINE_IN_USE
+#else
+# define _GL_INLINE static _GL_UNUSED
+# define _GL_EXTERN_INLINE static _GL_UNUSED
+#endif
+
+/* In GCC, suppress bogus "no previous prototype for 'FOO'"
+   and "no previous declaration for 'FOO'" diagnostics,
+   when FOO is an inline function in the header; see
+   <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54113> and
+   <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=63877>.  */
+#if 4 < __GNUC__ + (6 <= __GNUC_MINOR__)
+# if defined __GNUC_STDC_INLINE__ && __GNUC_STDC_INLINE__
+#  define _GL_INLINE_HEADER_CONST_PRAGMA
+# else
+#  define _GL_INLINE_HEADER_CONST_PRAGMA \
+     _Pragma ("GCC diagnostic ignored \"-Wsuggest-attribute=const\"")
+# endif
+# define _GL_INLINE_HEADER_BEGIN \
+    _Pragma ("GCC diagnostic push") \
+    _Pragma ("GCC diagnostic ignored \"-Wmissing-prototypes\"") \
+    _Pragma ("GCC diagnostic ignored \"-Wmissing-declarations\"") \
+    _GL_INLINE_HEADER_CONST_PRAGMA
+# define _GL_INLINE_HEADER_END \
+    _Pragma ("GCC diagnostic pop")
+#else
+# define _GL_INLINE_HEADER_BEGIN
+# define _GL_INLINE_HEADER_END
+#endif])
+])
diff --git a/config/fcntl-o.m4 b/config/fcntl-o.m4
new file mode 100644
index 0000000..43c9312
--- /dev/null
+++ b/config/fcntl-o.m4
@@ -0,0 +1,134 @@
+# fcntl-o.m4 serial 4
+dnl Copyright (C) 2006, 2009-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Written by Paul Eggert.
+
+# Test whether the flags O_NOATIME and O_NOFOLLOW actually work.
+# Define HAVE_WORKING_O_NOATIME to 1 if O_NOATIME works, or to 0 otherwise.
+# Define HAVE_WORKING_O_NOFOLLOW to 1 if O_NOFOLLOW works, or to 0 otherwise.
+AC_DEFUN([gl_FCNTL_O_FLAGS],
+[
+  dnl Persuade glibc <fcntl.h> to define O_NOATIME and O_NOFOLLOW.
+  dnl AC_USE_SYSTEM_EXTENSIONS was introduced in autoconf 2.60 and obsoletes
+  dnl AC_GNU_SOURCE.
+  m4_ifdef([AC_USE_SYSTEM_EXTENSIONS],
+    [AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])],
+    [AC_REQUIRE([AC_GNU_SOURCE])])
+
+  AC_CHECK_HEADERS_ONCE([unistd.h])
+  AC_CHECK_FUNCS_ONCE([symlink])
+  AC_CACHE_CHECK([for working fcntl.h], [gl_cv_header_working_fcntl_h],
+    [AC_RUN_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <sys/types.h>
+           #include <sys/stat.h>
+           #if HAVE_UNISTD_H
+           # include <unistd.h>
+           #else /* on Windows with MSVC */
+           # include <io.h>
+           # include <stdlib.h>
+           # defined sleep(n) _sleep ((n) * 1000)
+           #endif
+           #include <fcntl.h>
+           #ifndef O_NOATIME
+            #define O_NOATIME 0
+           #endif
+           #ifndef O_NOFOLLOW
+            #define O_NOFOLLOW 0
+           #endif
+           static int const constants[] =
+            {
+              O_CREAT, O_EXCL, O_NOCTTY, O_TRUNC, O_APPEND,
+              O_NONBLOCK, O_SYNC, O_ACCMODE, O_RDONLY, O_RDWR, O_WRONLY
+            };
+          ]],
+          [[
+            int result = !constants;
+            #if HAVE_SYMLINK
+            {
+              static char const sym[] = "conftest.sym";
+              if (symlink ("/dev/null", sym) != 0)
+                result |= 2;
+              else
+                {
+                  int fd = open (sym, O_WRONLY | O_NOFOLLOW | O_CREAT, 0);
+                  if (fd >= 0)
+                    {
+                      close (fd);
+                      result |= 4;
+                    }
+                }
+              if (unlink (sym) != 0 || symlink (".", sym) != 0)
+                result |= 2;
+              else
+                {
+                  int fd = open (sym, O_RDONLY | O_NOFOLLOW);
+                  if (fd >= 0)
+                    {
+                      close (fd);
+                      result |= 4;
+                    }
+                }
+              unlink (sym);
+            }
+            #endif
+            {
+              static char const file[] = "confdefs.h";
+              int fd = open (file, O_RDONLY | O_NOATIME);
+              if (fd < 0)
+                result |= 8;
+              else
+                {
+                  struct stat st0;
+                  if (fstat (fd, &st0) != 0)
+                    result |= 16;
+                  else
+                    {
+                      char c;
+                      sleep (1);
+                      if (read (fd, &c, 1) != 1)
+                        result |= 24;
+                      else
+                        {
+                          if (close (fd) != 0)
+                            result |= 32;
+                          else
+                            {
+                              struct stat st1;
+                              if (stat (file, &st1) != 0)
+                                result |= 40;
+                              else
+                                if (st0.st_atime != st1.st_atime)
+                                  result |= 64;
+                            }
+                        }
+                    }
+                }
+            }
+            return result;]])],
+       [gl_cv_header_working_fcntl_h=yes],
+       [case $? in #(
+        4) gl_cv_header_working_fcntl_h='no (bad O_NOFOLLOW)';; #(
+        64) gl_cv_header_working_fcntl_h='no (bad O_NOATIME)';; #(
+        68) gl_cv_header_working_fcntl_h='no (bad O_NOATIME, O_NOFOLLOW)';; #(
+         *) gl_cv_header_working_fcntl_h='no';;
+        esac],
+       [gl_cv_header_working_fcntl_h=cross-compiling])])
+
+  case $gl_cv_header_working_fcntl_h in #(
+  *O_NOATIME* | no | cross-compiling) ac_val=0;; #(
+  *) ac_val=1;;
+  esac
+  AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOATIME], [$ac_val],
+    [Define to 1 if O_NOATIME works.])
+
+  case $gl_cv_header_working_fcntl_h in #(
+  *O_NOFOLLOW* | no | cross-compiling) ac_val=0;; #(
+  *) ac_val=1;;
+  esac
+  AC_DEFINE_UNQUOTED([HAVE_WORKING_O_NOFOLLOW], [$ac_val],
+    [Define to 1 if O_NOFOLLOW works.])
+])
diff --git a/config/gettext.m4 b/config/gettext.m4
new file mode 100644
index 0000000..be247bf
--- /dev/null
+++ b/config/gettext.m4
@@ -0,0 +1,401 @@
+# gettext.m4 serial 66 (gettext-0.18.2)
+dnl Copyright (C) 1995-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl    default (if it is not specified or empty) is 'no-libtool'.
+dnl    INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl    and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl    If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl    depending on --{enable,disable}-{shared,static} and on the presence of
+dnl    AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl    $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl    implementations (in libc or libintl) without the ngettext() function
+dnl    will be ignored.  If NEEDSYMBOL is specified and is
+dnl    'need-formatstring-macros', then GNU gettext implementations that don't
+dnl    support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries.  If empty,
+dnl    the value '$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl    and used.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl    Catalog format: none
+dnl    Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+  dnl Argument checking.
+  ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+    [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+  ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
+    [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
+  ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+    [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+  define([gt_included_intl],
+    ifelse([$1], [external],
+      ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
+      [yes]))
+  define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+  gt_NEEDS_INIT
+  AM_GNU_GETTEXT_NEED([$2])
+
+  AC_REQUIRE([AM_PO_SUBDIRS])dnl
+  ifelse(gt_included_intl, yes, [
+    AC_REQUIRE([AM_INTL_SUBDIR])dnl
+  ])
+
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Sometimes libintl requires libiconv, so first search for libiconv.
+  dnl Ideally we would do this search only after the
+  dnl      if test "$USE_NLS" = "yes"; then
+  dnl        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+  dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+  dnl the configure script would need to contain the same shell code
+  dnl again, outside any 'if'. There are two solutions:
+  dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+  dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+  dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+  dnl documented, we avoid it.
+  ifelse(gt_included_intl, yes, , [
+    AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+  ])
+
+  dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation.
+  gt_INTL_MACOSX
+
+  dnl Set USE_NLS.
+  AC_REQUIRE([AM_NLS])
+
+  ifelse(gt_included_intl, yes, [
+    BUILD_INCLUDED_LIBINTL=no
+    USE_INCLUDED_LIBINTL=no
+  ])
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+  dnl Add a version number to the cache macros.
+  case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+  dnl If we use NLS figure out what method
+  if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+    ifelse(gt_included_intl, yes, [
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH([included-gettext],
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+    ])
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If GNU gettext is available we use this.  Else we have
+        dnl to fall back to GNU NLS library.
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+         [AC_LINK_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+               ]],
+               [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+               ]])],
+            [eval "$gt_func_gnugettext_libc=yes"],
+            [eval "$gt_func_gnugettext_libc=no"])])
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+          dnl Sometimes libintl requires libiconv, so first search for libiconv.
+          ifelse(gt_included_intl, yes, , [
+            AM_ICONV_LINK
+          ])
+          dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+          dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+          dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+          dnl even if libiconv doesn't exist.
+          AC_LIB_LINKFLAGS_BODY([intl])
+          AC_CACHE_CHECK([for GNU gettext in libintl],
+            [$gt_func_gnugettext_libintl],
+           [gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+            dnl Now see whether libintl exists and does not depend on libiconv.
+            AC_LINK_IFELSE(
+              [AC_LANG_PROGRAM(
+                 [[
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+                 ]],
+                 [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+                 ]])],
+              [eval "$gt_func_gnugettext_libintl=yes"],
+              [eval "$gt_func_gnugettext_libintl=no"])
+            dnl Now see whether libintl exists and depends on libiconv.
+            if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              AC_LINK_IFELSE(
+                [AC_LANG_PROGRAM(
+                   [[
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+                   ]],
+                   [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+                   ]])],
+                [LIBINTL="$LIBINTL $LIBICONV"
+                 LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                 eval "$gt_func_gnugettext_libintl=yes"
+                ])
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"])
+        fi
+
+        dnl If an already present or preinstalled GNU gettext() is found,
+        dnl use it.  But if this macro is used in GNU gettext, and GNU
+        dnl gettext is already preinstalled in libintl, we update this
+        dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+          dnl Reset the values set by searching for libintl.
+          LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+    ifelse(gt_included_intl, yes, [
+        if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+          dnl GNU gettext is not found in the C library.
+          dnl Fall back on included GNU gettext library.
+          nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        BUILD_INCLUDED_LIBINTL=yes
+        USE_INCLUDED_LIBINTL=yes
+        LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
+        LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
+        LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+      fi
+
+      CATOBJEXT=
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions to use GNU gettext tools.
+        CATOBJEXT=.gmo
+      fi
+    ])
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Some extra flags are needed during linking.
+        LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+      AC_DEFINE([ENABLE_NLS], [1],
+        [Define to 1 if translation of program messages to the user's native language
+   is requested.])
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  AC_MSG_CHECKING([whether to use NLS])
+  AC_MSG_RESULT([$USE_NLS])
+  if test "$USE_NLS" = "yes"; then
+    AC_MSG_CHECKING([where the gettext function comes from])
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    AC_MSG_RESULT([$gt_source])
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        AC_MSG_CHECKING([how to link with libintl])
+        AC_MSG_RESULT([$LIBINTL])
+        AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+      fi
+
+      dnl For backward compatibility. Some packages may be using this.
+      AC_DEFINE([HAVE_GETTEXT], [1],
+       [Define if the GNU gettext() function is already present or preinstalled.])
+      AC_DEFINE([HAVE_DCGETTEXT], [1],
+       [Define if the GNU dcgettext() function is already present or preinstalled.])
+    fi
+
+    dnl We need to process the po/ directory.
+    POSUB=po
+  fi
+
+  ifelse(gt_included_intl, yes, [
+    dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+    dnl to 'yes' because some of the testsuite requires it.
+    if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+      BUILD_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST([BUILD_INCLUDED_LIBINTL])
+    AC_SUBST([USE_INCLUDED_LIBINTL])
+    AC_SUBST([CATOBJEXT])
+
+    dnl For backward compatibility. Some configure.ins may be using this.
+    nls_cv_header_intl=
+    nls_cv_header_libgt=
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    DATADIRNAME=share
+    AC_SUBST([DATADIRNAME])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INSTOBJEXT=.mo
+    AC_SUBST([INSTOBJEXT])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    GENCAT=gencat
+    AC_SUBST([GENCAT])
+
+    dnl For backward compatibility. Some Makefiles may be using this.
+    INTLOBJS=
+    if test "$USE_INCLUDED_LIBINTL" = yes; then
+      INTLOBJS="\$(GETTOBJS)"
+    fi
+    AC_SUBST([INTLOBJS])
+
+    dnl Enable libtool support if the surrounding package wishes it.
+    INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+    AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
+  ])
+
+  dnl For backward compatibility. Some Makefiles may be using this.
+  INTLLIBS="$LIBINTL"
+  AC_SUBST([INTLLIBS])
+
+  dnl Make all documented variables known to autoconf.
+  AC_SUBST([LIBINTL])
+  AC_SUBST([LTLIBINTL])
+  AC_SUBST([POSUB])
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+  m4_divert_text([DEFAULTS], [gt_needs=])
+  m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+  m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
diff --git a/config/glibc2.m4 b/config/glibc2.m4
new file mode 100644
index 0000000..71dd8a1
--- /dev/null
+++ b/config/glibc2.m4
@@ -0,0 +1,31 @@
+# glibc2.m4 serial 3
+dnl Copyright (C) 2000-2002, 2004, 2008, 2010-2014 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.0 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([gt_GLIBC2],
+  [
+    AC_CACHE_CHECK([whether we are using the GNU C Library 2 or newer],
+      [ac_cv_gnu_library_2],
+      [AC_EGREP_CPP([Lucky GNU user],
+        [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ >= 2) && !defined __UCLIBC__
+  Lucky GNU user
+ #endif
+#endif
+        ],
+        [ac_cv_gnu_library_2=yes],
+        [ac_cv_gnu_library_2=no])
+      ]
+    )
+    AC_SUBST([GLIBC2])
+    GLIBC2="$ac_cv_gnu_library_2"
+  ]
+)
diff --git a/config/glibc21.m4 b/config/glibc21.m4
new file mode 100644
index 0000000..ab58b71
--- /dev/null
+++ b/config/glibc21.m4
@@ -0,0 +1,34 @@
+# glibc21.m4 serial 5
+dnl Copyright (C) 2000-2002, 2004, 2008, 2010-2014 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.1 or newer, or uClibc.
+# From Bruno Haible.
+
+AC_DEFUN([gl_GLIBC21],
+  [
+    AC_CACHE_CHECK([whether we are using the GNU C Library >= 2.1 or uClibc],
+      [ac_cv_gnu_library_2_1],
+      [AC_EGREP_CPP([Lucky],
+        [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+  Lucky GNU user
+ #endif
+#endif
+#ifdef __UCLIBC__
+ Lucky user
+#endif
+        ],
+        [ac_cv_gnu_library_2_1=yes],
+        [ac_cv_gnu_library_2_1=no])
+      ]
+    )
+    AC_SUBST([GLIBC21])
+    GLIBC21="$ac_cv_gnu_library_2_1"
+  ]
+)
diff --git a/config/iconv.m4 b/config/iconv.m4
new file mode 100644
index 0000000..4e37363
--- /dev/null
+++ b/config/iconv.m4
@@ -0,0 +1,271 @@
+# iconv.m4 serial 19 (gettext-0.18.2)
+dnl Copyright (C) 2000-2002, 2007-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+  dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+  dnl those with the standalone portable GNU libiconv installed).
+  AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+  dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed libiconv and not disabled its use
+  dnl via --without-libiconv-prefix, he wants to use it. The first
+  dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
+  am_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+  AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    AC_LINK_IFELSE(
+      [AC_LANG_PROGRAM(
+         [[
+#include <stdlib.h>
+#include <iconv.h>
+         ]],
+         [[iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);]])],
+      [am_cv_func_iconv=yes])
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      AC_LINK_IFELSE(
+        [AC_LANG_PROGRAM(
+           [[
+#include <stdlib.h>
+#include <iconv.h>
+           ]],
+           [[iconv_t cd = iconv_open("","");
+             iconv(cd,NULL,NULL,NULL,NULL);
+             iconv_close(cd);]])],
+        [am_cv_lib_iconv=yes]
+        [am_cv_func_iconv=yes])
+      LIBS="$am_save_LIBS"
+    fi
+  ])
+  if test "$am_cv_func_iconv" = yes; then
+    AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
+      dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
+      dnl Solaris 10.
+      am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      am_cv_func_iconv_works=no
+      for ac_iconv_const in '' 'const'; do
+        AC_RUN_IFELSE(
+          [AC_LANG_PROGRAM(
+             [[
+#include <iconv.h>
+#include <string.h>
+
+#ifndef ICONV_CONST
+# define ICONV_CONST $ac_iconv_const
+#endif
+             ]],
+             [[int result = 0;
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 1;
+        iconv_close (cd_utf8_to_88591);
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\263";
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 2;
+        iconv_close (cd_ascii_to_88591);
+      }
+  }
+  /* Test against AIX 6.1..7.1 bug: Buffer overrun.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304";
+        static char buf[2] = { (char)0xDE, (char)0xAD };
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = 1;
+        char *outptr = buf;
+        size_t outbytesleft = 1;
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+          result |= 4;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          result |= 8;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  if (/* Try standardized names.  */
+      iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+      /* Try IRIX, OSF/1 names.  */
+      && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+      /* Try AIX names.  */
+      && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+      /* Try HP-UX names.  */
+      && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+    result |= 16;
+  return result;
+]])],
+          [am_cv_func_iconv_works=yes], ,
+          [case "$host_os" in
+             aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+             *)            am_cv_func_iconv_works="guessing yes" ;;
+           esac])
+        test "$am_cv_func_iconv_works" = no || break
+      done
+      LIBS="$am_save_LIBS"
+    ])
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+    AC_DEFINE([HAVE_ICONV], [1],
+      [Define if you have the iconv() function and it works.])
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    AC_MSG_CHECKING([how to link with libiconv])
+    AC_MSG_RESULT([$LIBICONV])
+  else
+    dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+    dnl either.
+    CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+  AC_SUBST([LIBICONV])
+  AC_SUBST([LTLIBICONV])
+])
+
+dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
+dnl avoid warnings like
+dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
+dnl This is tricky because of the way 'aclocal' is implemented:
+dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
+dnl   Otherwise aclocal's initial scan pass would miss the macro definition.
+dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
+dnl   Otherwise aclocal would emit many "Use of uninitialized value $1"
+dnl   warnings.
+m4_define([gl_iconv_AC_DEFUN],
+  m4_version_prereq([2.64],
+    [[AC_DEFUN_ONCE(
+        [$1], [$2])]],
+    [m4_ifdef([gl_00GNULIB],
+       [[AC_DEFUN_ONCE(
+           [$1], [$2])]],
+       [[AC_DEFUN(
+           [$1], [$2])]])]))
+gl_iconv_AC_DEFUN([AM_ICONV],
+[
+  AM_ICONV_LINK
+  if test "$am_cv_func_iconv" = yes; then
+    AC_MSG_CHECKING([for iconv declaration])
+    AC_CACHE_VAL([am_cv_proto_iconv], [
+      AC_COMPILE_IFELSE(
+        [AC_LANG_PROGRAM(
+           [[
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+           ]],
+           [[]])],
+        [am_cv_proto_iconv_arg1=""],
+        [am_cv_proto_iconv_arg1="const"])
+      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+    am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+    AC_MSG_RESULT([
+         $am_cv_proto_iconv])
+    AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
+      [Define as const if the declaration of iconv() needs const.])
+    dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
+    m4_ifdef([gl_ICONV_H_DEFAULTS],
+      [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
+       if test -n "$am_cv_proto_iconv_arg1"; then
+         ICONV_CONST="const"
+       fi
+      ])
+  fi
+])
diff --git a/config/install-sh b/config/install-sh
new file mode 100755
index 0000000..0b0fdcb
--- /dev/null
+++ b/config/install-sh
@@ -0,0 +1,501 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2013-12-25.23; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/intdiv0.m4 b/config/intdiv0.m4
new file mode 100644
index 0000000..afa9acb
--- /dev/null
+++ b/config/intdiv0.m4
@@ -0,0 +1,87 @@
+# intdiv0.m4 serial 6 (gettext-0.18.2)
+dnl Copyright (C) 2002, 2007-2008, 2010-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+  AC_REQUIRE([AC_PROG_CC])dnl
+  AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+  AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+    gt_cv_int_divbyzero_sigfpe,
+    [
+      gt_cv_int_divbyzero_sigfpe=
+changequote(,)dnl
+      case "$host_os" in
+        macos* | darwin[6-9]* | darwin[1-9][0-9]*)
+          # On Mac OS X 10.2 or newer, just assume the same as when cross-
+          # compiling. If we were to perform the real test, 1 Crash Report
+          # dialog window would pop up.
+          case "$host_cpu" in
+            i[34567]86 | x86_64)
+              gt_cv_int_divbyzero_sigfpe="guessing yes" ;;
+          esac
+          ;;
+      esac
+changequote([,])dnl
+      if test -z "$gt_cv_int_divbyzero_sigfpe"; then
+        AC_RUN_IFELSE(
+          [AC_LANG_SOURCE([[
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+sigfpe_handler (int sig)
+{
+  /* Exit with code 0 if SIGFPE, with code 1 if any other signal.  */
+  exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+  signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP.  */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+  signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL.  */
+#if defined (__sparc__) && defined (__linux__)
+  signal (SIGILL, sigfpe_handler);
+#endif
+
+  z = x / y;
+  nan = y / y;
+  exit (2);
+}
+]])],
+          [gt_cv_int_divbyzero_sigfpe=yes],
+          [gt_cv_int_divbyzero_sigfpe=no],
+          [
+            # Guess based on the CPU.
+changequote(,)dnl
+            case "$host_cpu" in
+              alpha* | i[34567]86 | x86_64 | m68k | s390*)
+                gt_cv_int_divbyzero_sigfpe="guessing yes";;
+              *)
+                gt_cv_int_divbyzero_sigfpe="guessing no";;
+            esac
+changequote([,])dnl
+          ])
+      fi
+    ])
+  case "$gt_cv_int_divbyzero_sigfpe" in
+    *yes) value=1;;
+    *) value=0;;
+  esac
+  AC_DEFINE_UNQUOTED([INTDIV0_RAISES_SIGFPE], [$value],
+    [Define if integer division by zero raises signal SIGFPE.])
+])
diff --git a/config/intl.m4 b/config/intl.m4
new file mode 100644
index 0000000..0c29ad0
--- /dev/null
+++ b/config/intl.m4
@@ -0,0 +1,298 @@
+# intl.m4 serial 28 (gettext-0.19)
+dnl Copyright (C) 1995-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2009.
+
+AC_PREREQ([2.60])
+
+dnl Checks for all prerequisites of the intl subdirectory,
+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
+dnl            USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
+AC_DEFUN([AM_INTL_SUBDIR],
+[
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+  AC_REQUIRE([AC_PROG_CC])dnl
+  AC_REQUIRE([AC_CANONICAL_HOST])dnl
+  AC_REQUIRE([gt_GLIBC2])dnl
+  AC_REQUIRE([AC_PROG_RANLIB])dnl
+  AC_REQUIRE([gl_VISIBILITY])dnl
+  AC_REQUIRE([gt_INTL_SUBDIR_CORE])dnl
+  AC_REQUIRE([AC_TYPE_LONG_LONG_INT])dnl
+  AC_REQUIRE([gt_TYPE_WCHAR_T])dnl
+  AC_REQUIRE([gt_TYPE_WINT_T])dnl
+  AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+  AC_REQUIRE([gt_TYPE_INTMAX_T])
+  AC_REQUIRE([gt_PRINTF_POSIX])
+  AC_REQUIRE([gl_GLIBC21])dnl
+  AC_REQUIRE([gl_XSIZE])dnl
+  AC_REQUIRE([gl_FCNTL_O_FLAGS])dnl
+  AC_REQUIRE([gt_INTL_MACOSX])dnl
+  AC_REQUIRE([gl_EXTERN_INLINE])dnl
+  AC_REQUIRE([gt_GL_ATTRIBUTE])dnl
+
+  dnl Support for automake's --enable-silent-rules.
+  case "$enable_silent_rules" in
+    yes) INTL_DEFAULT_VERBOSITY=0;;
+    no)  INTL_DEFAULT_VERBOSITY=1;;
+    *)   INTL_DEFAULT_VERBOSITY=1;;
+  esac
+  AC_SUBST([INTL_DEFAULT_VERBOSITY])
+
+  AC_CHECK_TYPE([ptrdiff_t], ,
+    [AC_DEFINE([ptrdiff_t], [long],
+       [Define as the type of the result of subtracting two pointers, if the system doesn't define it.])
+    ])
+  AC_CHECK_HEADERS([features.h stddef.h stdlib.h string.h])
+  AC_CHECK_FUNCS([asprintf fwprintf newlocale putenv setenv setlocale \
+    snprintf strnlen wcslen wcsnlen mbrtowc wcrtomb])
+
+  dnl Use the _snprintf function only if it is declared (because on NetBSD it
+  dnl is defined as a weak alias of snprintf; we prefer to use the latter).
+  AC_CHECK_DECLS([_snprintf, _snwprintf], , , [#include <stdio.h>])
+
+  dnl Use the *_unlocked functions only if they are declared.
+  dnl (because some of them were defined without being declared in Solaris
+  dnl 2.5.1 but were removed in Solaris 2.6, whereas we want binaries built
+  dnl on Solaris 2.5.1 to run on Solaris 2.6).
+  AC_CHECK_DECLS([getc_unlocked], , , [#include <stdio.h>])
+
+  case $gt_cv_func_printf_posix in
+    *yes) HAVE_POSIX_PRINTF=1 ;;
+    *) HAVE_POSIX_PRINTF=0 ;;
+  esac
+  AC_SUBST([HAVE_POSIX_PRINTF])
+  if test "$ac_cv_func_asprintf" = yes; then
+    HAVE_ASPRINTF=1
+  else
+    HAVE_ASPRINTF=0
+  fi
+  AC_SUBST([HAVE_ASPRINTF])
+  if test "$ac_cv_func_snprintf" = yes; then
+    HAVE_SNPRINTF=1
+  else
+    HAVE_SNPRINTF=0
+  fi
+  AC_SUBST([HAVE_SNPRINTF])
+  if test "$ac_cv_func_newlocale" = yes; then
+    HAVE_NEWLOCALE=1
+  else
+    HAVE_NEWLOCALE=0
+  fi
+  AC_SUBST([HAVE_NEWLOCALE])
+  if test "$ac_cv_func_wprintf" = yes; then
+    HAVE_WPRINTF=1
+  else
+    HAVE_WPRINTF=0
+  fi
+  AC_SUBST([HAVE_WPRINTF])
+
+  AM_LANGINFO_CODESET
+  gt_LC_MESSAGES
+
+  dnl Compilation on mingw and Cygwin needs special Makefile rules, because
+  dnl 1. when we install a shared library, we must arrange to export
+  dnl    auxiliary pointer variables for every exported variable,
+  dnl 2. when we install a shared library and a static library simultaneously,
+  dnl    the include file specifies __declspec(dllimport) and therefore we
+  dnl    must arrange to define the auxiliary pointer variables for the
+  dnl    exported variables _also_ in the static library.
+  if test "$enable_shared" = yes; then
+    case "$host_os" in
+      mingw* | cygwin*) is_woe32dll=yes ;;
+      *) is_woe32dll=no ;;
+    esac
+  else
+    is_woe32dll=no
+  fi
+  WOE32DLL=$is_woe32dll
+  AC_SUBST([WOE32DLL])
+
+  dnl On mingw and Cygwin, we can activate special Makefile rules which add
+  dnl version information to the shared libraries and executables.
+  case "$host_os" in
+    mingw* | cygwin*) is_woe32=yes ;;
+    *) is_woe32=no ;;
+  esac
+  WOE32=$is_woe32
+  AC_SUBST([WOE32])
+  if test $WOE32 = yes; then
+    dnl Check for a program that compiles Windows resource files.
+    AC_CHECK_TOOL([WINDRES], [windres])
+  fi
+
+  dnl Determine whether when creating a library, "-lc" should be passed to
+  dnl libtool or not. On many platforms, it is required for the libtool option
+  dnl -no-undefined to work. On HP-UX, however, the -lc - stored by libtool
+  dnl in the *.la files - makes it impossible to create multithreaded programs,
+  dnl because libtool also reorders the -lc to come before the -pthread, and
+  dnl this disables pthread_create() <http://docs.hp.com/en/1896/pthreads.html>.
+  case "$host_os" in
+    hpux*) LTLIBC="" ;;
+    *)     LTLIBC="-lc" ;;
+  esac
+  AC_SUBST([LTLIBC])
+
+  dnl Rename some macros and functions used for locking.
+  AH_BOTTOM([
+#define __libc_lock_t                   gl_lock_t
+#define __libc_lock_define              gl_lock_define
+#define __libc_lock_define_initialized  gl_lock_define_initialized
+#define __libc_lock_init                gl_lock_init
+#define __libc_lock_lock                gl_lock_lock
+#define __libc_lock_unlock              gl_lock_unlock
+#define __libc_lock_recursive_t                   gl_recursive_lock_t
+#define __libc_lock_define_recursive              gl_recursive_lock_define
+#define __libc_lock_define_initialized_recursive  gl_recursive_lock_define_initialized
+#define __libc_lock_init_recursive                gl_recursive_lock_init
+#define __libc_lock_lock_recursive                gl_recursive_lock_lock
+#define __libc_lock_unlock_recursive              gl_recursive_lock_unlock
+#define glthread_in_use  libintl_thread_in_use
+#define glthread_lock_init_func     libintl_lock_init_func
+#define glthread_lock_lock_func     libintl_lock_lock_func
+#define glthread_lock_unlock_func   libintl_lock_unlock_func
+#define glthread_lock_destroy_func  libintl_lock_destroy_func
+#define glthread_rwlock_init_multithreaded     libintl_rwlock_init_multithreaded
+#define glthread_rwlock_init_func              libintl_rwlock_init_func
+#define glthread_rwlock_rdlock_multithreaded   libintl_rwlock_rdlock_multithreaded
+#define glthread_rwlock_rdlock_func            libintl_rwlock_rdlock_func
+#define glthread_rwlock_wrlock_multithreaded   libintl_rwlock_wrlock_multithreaded
+#define glthread_rwlock_wrlock_func            libintl_rwlock_wrlock_func
+#define glthread_rwlock_unlock_multithreaded   libintl_rwlock_unlock_multithreaded
+#define glthread_rwlock_unlock_func            libintl_rwlock_unlock_func
+#define glthread_rwlock_destroy_multithreaded  libintl_rwlock_destroy_multithreaded
+#define glthread_rwlock_destroy_func           libintl_rwlock_destroy_func
+#define glthread_recursive_lock_init_multithreaded     libintl_recursive_lock_init_multithreaded
+#define glthread_recursive_lock_init_func              libintl_recursive_lock_init_func
+#define glthread_recursive_lock_lock_multithreaded     libintl_recursive_lock_lock_multithreaded
+#define glthread_recursive_lock_lock_func              libintl_recursive_lock_lock_func
+#define glthread_recursive_lock_unlock_multithreaded   libintl_recursive_lock_unlock_multithreaded
+#define glthread_recursive_lock_unlock_func            libintl_recursive_lock_unlock_func
+#define glthread_recursive_lock_destroy_multithreaded  libintl_recursive_lock_destroy_multithreaded
+#define glthread_recursive_lock_destroy_func           libintl_recursive_lock_destroy_func
+#define glthread_once_func            libintl_once_func
+#define glthread_once_singlethreaded  libintl_once_singlethreaded
+#define glthread_once_multithreaded   libintl_once_multithreaded
+])
+])
+
+
+dnl Checks for the core files of the intl subdirectory:
+dnl   dcigettext.c
+dnl   eval-plural.h
+dnl   explodename.c
+dnl   finddomain.c
+dnl   gettextP.h
+dnl   gmo.h
+dnl   hash-string.h hash-string.c
+dnl   l10nflist.c
+dnl   libgnuintl.h.in (except the *printf stuff)
+dnl   loadinfo.h
+dnl   loadmsgcat.c
+dnl   localealias.c
+dnl   log.c
+dnl   plural-exp.h plural-exp.c
+dnl   plural.y
+dnl Used by libglocale.
+AC_DEFUN([gt_INTL_SUBDIR_CORE],
+[
+  AC_REQUIRE([AC_C_INLINE])dnl
+  AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+  AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+  AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+  AC_REQUIRE([AC_FUNC_MMAP])dnl
+  AC_REQUIRE([gt_INTDIV0])dnl
+  AC_REQUIRE([gl_AC_TYPE_UINTMAX_T])dnl
+  AC_REQUIRE([gt_INTTYPES_PRI])dnl
+  AC_REQUIRE([gl_LOCK])dnl
+
+  AC_LINK_IFELSE(
+    [AC_LANG_PROGRAM(
+       [[int foo (int a) { a = __builtin_expect (a, 10); return a == 10 ? 0 : 1; }]],
+       [[]])],
+    [AC_DEFINE([HAVE_BUILTIN_EXPECT], [1],
+       [Define to 1 if the compiler understands __builtin_expect.])])
+
+  AC_CHECK_HEADERS([argz.h inttypes.h limits.h unistd.h sys/param.h])
+  AC_CHECK_FUNCS([getcwd getegid geteuid getgid getuid mempcpy munmap \
+    stpcpy strcasecmp strdup strtoul tsearch uselocale argz_count \
+    argz_stringify argz_next __fsetlocking])
+
+  dnl Use the *_unlocked functions only if they are declared.
+  dnl (because some of them were defined without being declared in Solaris
+  dnl 2.5.1 but were removed in Solaris 2.6, whereas we want binaries built
+  dnl on Solaris 2.5.1 to run on Solaris 2.6).
+  AC_CHECK_DECLS([feof_unlocked, fgets_unlocked], , , [#include <stdio.h>])
+
+  AM_ICONV
+
+  dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+  dnl because plural.y uses bison specific features. It requires at least
+  dnl bison-2.7 for %define api.pure.
+  dnl bison is only needed for the maintainer (who touches plural.y). But in
+  dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+  dnl the rule in general Makefile. Now, some people carelessly touch the
+  dnl files or have a broken "make" program, hence the plural.c rule will
+  dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+  dnl present or too old.
+  AC_CHECK_PROGS([INTLBISON], [bison])
+  if test -z "$INTLBISON"; then
+    ac_verc_fail=yes
+  else
+    dnl Found it, now check the version.
+    AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+    ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+    case $ac_prog_version in
+      '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+      2.[7-9]* | [3-9].*)
+changequote([,])dnl
+         ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+      *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+    esac
+    AC_MSG_RESULT([$ac_prog_version])
+  fi
+  if test $ac_verc_fail = yes; then
+    INTLBISON=:
+  fi
+])
+
+dnl Copies _GL_UNUSED and _GL_ATTRIBUTE_PURE definitions from
+dnl gnulib-common.m4 as a fallback, if the project isn't using Gnulib.
+AC_DEFUN([gt_GL_ATTRIBUTE], [
+  m4_ifndef([gl_[]COMMON],
+    AH_VERBATIM([gt_gl_attribute],
+[/* Define as a marker that can be attached to declarations that might not
+    be used.  This helps to reduce warnings, such as from
+    GCC -Wunused-parameter.  */
+#ifndef _GL_UNUSED
+# if __GNUC__ >= 3 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 7)
+#  define _GL_UNUSED __attribute__ ((__unused__))
+# else
+#  define _GL_UNUSED
+# endif
+#endif
+
+/* The __pure__ attribute was added in gcc 2.96.  */
+#ifndef _GL_ATTRIBUTE_PURE
+# if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 96)
+#  define _GL_ATTRIBUTE_PURE __attribute__ ((__pure__))
+# else
+#  define _GL_ATTRIBUTE_PURE /* empty */
+# endif
+#endif
+]))])
diff --git a/config/intldir.m4 b/config/intldir.m4
new file mode 100644
index 0000000..73b672a
--- /dev/null
+++ b/config/intldir.m4
@@ -0,0 +1,19 @@
+# intldir.m4 serial 2 (gettext-0.18)
+dnl Copyright (C) 2006, 2009-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+AC_PREREQ([2.52])
+
+dnl Tells the AM_GNU_GETTEXT macro to consider an intl/ directory.
+AC_DEFUN([AM_GNU_GETTEXT_INTL_SUBDIR], [])
diff --git a/config/intlmacosx.m4 b/config/intlmacosx.m4
new file mode 100644
index 0000000..8a045f6
--- /dev/null
+++ b/config/intlmacosx.m4
@@ -0,0 +1,56 @@
+# intlmacosx.m4 serial 5 (gettext-0.18.2)
+dnl Copyright (C) 2004-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Checks for special options needed on Mac OS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+  dnl Check for API introduced in Mac OS X 10.2.
+  AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+    [gt_cv_func_CFPreferencesCopyAppValue],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFPreferences.h>]],
+          [[CFPreferencesCopyAppValue(NULL, NULL)]])],
+       [gt_cv_func_CFPreferencesCopyAppValue=yes],
+       [gt_cv_func_CFPreferencesCopyAppValue=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+    AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
+      [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+  fi
+  dnl Check for API introduced in Mac OS X 10.3.
+  AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFLocale.h>]],
+          [[CFLocaleCopyCurrent();]])],
+       [gt_cv_func_CFLocaleCopyCurrent=yes],
+       [gt_cv_func_CFLocaleCopyCurrent=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
+      [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+  AC_SUBST([INTL_MACOSX_LIBS])
+])
diff --git a/config/intmax.m4 b/config/intmax.m4
new file mode 100644
index 0000000..f70ceee
--- /dev/null
+++ b/config/intmax.m4
@@ -0,0 +1,36 @@
+# intmax.m4 serial 6 (gettext-0.18.2)
+dnl Copyright (C) 2002-2005, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the system has the 'intmax_t' type, but don't attempt to
+dnl find a replacement if it is lacking.
+
+AC_DEFUN([gt_TYPE_INTMAX_T],
+[
+  AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+  AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+  AC_CACHE_CHECK([for intmax_t], [gt_cv_c_intmax_t],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[
+#include <stddef.h>
+#include <stdlib.h>
+#if HAVE_STDINT_H_WITH_UINTMAX
+#include <stdint.h>
+#endif
+#if HAVE_INTTYPES_H_WITH_UINTMAX
+#include <inttypes.h>
+#endif
+          ]],
+          [[intmax_t x = -1;
+            return !x;]])],
+       [gt_cv_c_intmax_t=yes],
+       [gt_cv_c_intmax_t=no])])
+  if test $gt_cv_c_intmax_t = yes; then
+    AC_DEFINE([HAVE_INTMAX_T], [1],
+      [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+  fi
+])
diff --git a/config/inttypes-pri.m4 b/config/inttypes-pri.m4
new file mode 100644
index 0000000..00251e1
--- /dev/null
+++ b/config/inttypes-pri.m4
@@ -0,0 +1,42 @@
+# inttypes-pri.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1997-2002, 2006, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.53])
+
+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
+# macros to non-string values.  This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+  AC_CHECK_HEADERS([inttypes.h])
+  if test $ac_cv_header_inttypes_h = yes; then
+    AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+      [gt_cv_inttypes_pri_broken],
+      [
+        AC_COMPILE_IFELSE(
+          [AC_LANG_PROGRAM(
+             [[
+#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+             ]],
+             [[]])],
+          [gt_cv_inttypes_pri_broken=no],
+          [gt_cv_inttypes_pri_broken=yes])
+      ])
+  fi
+  if test "$gt_cv_inttypes_pri_broken" = yes; then
+    AC_DEFINE_UNQUOTED([PRI_MACROS_BROKEN], [1],
+      [Define if <inttypes.h> exists and defines unusable PRI* macros.])
+    PRI_MACROS_BROKEN=1
+  else
+    PRI_MACROS_BROKEN=0
+  fi
+  AC_SUBST([PRI_MACROS_BROKEN])
+])
diff --git a/config/inttypes_h.m4 b/config/inttypes_h.m4
new file mode 100644
index 0000000..87be9cf
--- /dev/null
+++ b/config/inttypes_h.m4
@@ -0,0 +1,29 @@
+# inttypes_h.m4 serial 10
+dnl Copyright (C) 1997-2004, 2006, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_INTTYPES_H],
+[
+  AC_CACHE_CHECK([for inttypes.h], [gl_cv_header_inttypes_h],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[
+#include <sys/types.h>
+#include <inttypes.h>
+          ]],
+          [[uintmax_t i = (uintmax_t) -1; return !i;]])],
+       [gl_cv_header_inttypes_h=yes],
+       [gl_cv_header_inttypes_h=no])])
+  if test $gl_cv_header_inttypes_h = yes; then
+    AC_DEFINE_UNQUOTED([HAVE_INTTYPES_H_WITH_UINTMAX], [1],
+      [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+       and declares uintmax_t. ])
+  fi
+])
diff --git a/config/lcmessage.m4 b/config/lcmessage.m4
new file mode 100644
index 0000000..7470ec5
--- /dev/null
+++ b/config/lcmessage.m4
@@ -0,0 +1,35 @@
+# lcmessage.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1995-2002, 2004-2005, 2008-2014 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+
+AC_DEFUN([gt_LC_MESSAGES],
+[
+  AC_CACHE_CHECK([for LC_MESSAGES], [gt_cv_val_LC_MESSAGES],
+    [AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <locale.h>]],
+          [[return LC_MESSAGES]])],
+       [gt_cv_val_LC_MESSAGES=yes],
+       [gt_cv_val_LC_MESSAGES=no])])
+  if test $gt_cv_val_LC_MESSAGES = yes; then
+    AC_DEFINE([HAVE_LC_MESSAGES], [1],
+      [Define if your <locale.h> file defines LC_MESSAGES.])
+  fi
+])
diff --git a/config/lib-ld.m4 b/config/lib-ld.m4
new file mode 100644
index 0000000..ddc569f
--- /dev/null
+++ b/config/lib-ld.m4
@@ -0,0 +1,119 @@
+# lib-ld.m4 serial 6
+dnl Copyright (C) 1996-2003, 2009-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid
+dnl collision with libtool.m4.
+
+dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes
+  ;;
+*)
+  acl_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-2.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+        [assume the C compiler uses GNU ld [default=no]])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'`
+      while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL([acl_cv_path_LD],
+[if test -z "$LD"; then
+  acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$acl_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+        test "$with_gnu_ld" != no && break
+        ;;
+      *)
+        test "$with_gnu_ld" != yes && break
+        ;;
+      esac
+    fi
+  done
+  IFS="$acl_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT([$LD])
+else
+  AC_MSG_RESULT([no])
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
diff --git a/config/lib-link.m4 b/config/lib-link.m4
new file mode 100644
index 0000000..3522d99
--- /dev/null
+++ b/config/lib-link.m4
@@ -0,0 +1,777 @@
+# lib-link.m4 serial 26 (gettext-0.18.2)
+dnl Copyright (C) 2001-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.54])
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[m4_translit([$1],[./+-], [____])])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+    AC_LIB_LINKFLAGS_BODY([$1], [$2])
+    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+    ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+  ])
+  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+  LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+  dnl results of this search when this library appears as a dependency.
+  HAVE_LIB[]NAME=yes
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. The missing-message
+dnl defaults to 'no' and may contain additional hints for the user.
+dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
+dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[m4_translit([$1],[./+-], [____])])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+
+  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed lib[]Name and not disabled its use
+  dnl via --without-lib[]Name-prefix, he wants to use it.
+  ac_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+    ac_save_LIBS="$LIBS"
+    dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
+    dnl because these -l options might require -L options that are present in
+    dnl LIBS. -l options benefit only from the -L options listed before it.
+    dnl Otherwise, add it to the front of LIBS, because it may be a static
+    dnl library that depends on another static library that is present in LIBS.
+    dnl Static libraries benefit only from the static libraries listed after
+    dnl it.
+    case " $LIB[]NAME" in
+      *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
+      *)       LIBS="$LIB[]NAME $LIBS" ;;
+    esac
+    AC_LINK_IFELSE(
+      [AC_LANG_PROGRAM([[$3]], [[$4]])],
+      [ac_cv_lib[]Name=yes],
+      [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
+    LIBS="$ac_save_LIBS"
+  ])
+  if test "$ac_cv_lib[]Name" = yes; then
+    HAVE_LIB[]NAME=yes
+    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
+    AC_MSG_CHECKING([how to link with lib[]$1])
+    AC_MSG_RESULT([$LIB[]NAME])
+  else
+    HAVE_LIB[]NAME=no
+    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+    dnl $INC[]NAME either.
+    CPPFLAGS="$ac_save_CPPFLAGS"
+    LIB[]NAME=
+    LTLIB[]NAME=
+    LIB[]NAME[]_PREFIX=
+  fi
+  AC_SUBST([HAVE_LIB]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl   acl_libext,
+dnl   acl_shlibext,
+dnl   acl_libname_spec,
+dnl   acl_library_names_spec,
+dnl   acl_hardcode_libdir_flag_spec,
+dnl   acl_hardcode_libdir_separator,
+dnl   acl_hardcode_direct,
+dnl   acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+  dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+  m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
+  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
+  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
+  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+  AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+  ])
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+  dnl Determine whether the user wants rpath handling at all.
+  AC_ARG_ENABLE([rpath],
+    [  --disable-rpath         do not hardcode runtime library paths],
+    :, enable_rpath=yes)
+])
+
+dnl AC_LIB_FROMPACKAGE(name, package)
+dnl declares that libname comes from the given package. The configure file
+dnl will then not have a --with-libname-prefix option but a
+dnl --with-package-prefix option. Several libraries can come from the same
+dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
+dnl macro call that searches for libname.
+AC_DEFUN([AC_LIB_FROMPACKAGE],
+[
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  define([acl_frompackage_]NAME, [$2])
+  popdef([NAME])
+  pushdef([PACK],[$2])
+  pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+                                     [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  define([acl_libsinpackage_]PACKUP,
+    m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1])
+  popdef([PACKUP])
+  popdef([PACK])
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
+  pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+                                     [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
+  dnl Autoconf >= 2.61 supports dots in --with options.
+  pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[m4_translit(PACK,[.],[_])],PACK)])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH(P_A_C_K[-prefix],
+[[  --with-]]P_A_C_K[[-prefix[=DIR]  search for ]PACKLIBS[ in DIR/include and DIR/lib
+  --without-]]P_A_C_K[[-prefix     don't search for ]PACKLIBS[ in includedir and libdir]],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+])
+  dnl Search the library and its dependencies in $additional_libdir and
+  dnl $LDFLAGS. Using breadth-first-seach.
+  LIB[]NAME=
+  LTLIB[]NAME=
+  INC[]NAME=
+  LIB[]NAME[]_PREFIX=
+  dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
+  dnl computed. So it has to be reset here.
+  HAVE_LIB[]NAME=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='$1 $2'
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+        dnl or AC_LIB_HAVE_LINKFLAGS call.
+        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+          else
+            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+            dnl that this library doesn't exist. So just drop it.
+            :
+          fi
+        else
+          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+          dnl and the already constructed $LIBNAME/$LTLIBNAME.
+          found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+            dnl The same code as in the loop below:
+            dnl First look for a shared library.
+            if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+            dnl Then look for a static library.
+            if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIB[]NAME; do
+              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                  dnl First look for a shared library.
+                  if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                  dnl Then look for a static library.
+                  if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+            dnl Found the library.
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+              dnl Linking with a shared library. We attempt to hardcode its
+              dnl directory into the executable's runpath, unless it's the
+              dnl standard /usr/lib.
+              if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                dnl No hardcoding is needed.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+              else
+                dnl Use an explicit option to hardcode DIR into the resulting
+                dnl binary.
+                dnl Potentially add DIR to ltrpathdirs.
+                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                dnl The hardcoding into $LIBNAME is system dependent.
+                if test "$acl_hardcode_direct" = yes; then
+                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+                  dnl resulting binary.
+                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                    dnl Use an explicit option to hardcode DIR into the resulting
+                    dnl binary.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    dnl Potentially add DIR to rpathdirs.
+                    dnl The rpathdirs will be appended to $LIBNAME at the end.
+                    haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                    dnl Rely on "-L$found_dir".
+                    dnl But don't add it if it's already contained in the LDFLAGS
+                    dnl or the already constructed $LIBNAME
+                    haveit=
+                    for x in $LDFLAGS $LIB[]NAME; do
+                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    else
+                      dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+                      dnl here, because this doesn't fit in flags passed to the
+                      dnl compiler. So give up. No hardcoding. This affects only
+                      dnl very old systems.
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                dnl Linking with a static library.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+              else
+                dnl We shouldn't come here, but anyway it's good to have a
+                dnl fallback.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+              fi
+            fi
+            dnl Assume the include files are nearby.
+            additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+              dnl Potentially add $additional_includedir to $INCNAME.
+              dnl But don't add it
+              dnl   1. if it's the standard /usr/include,
+              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
+              dnl   3. if it's already present in $CPPFLAGS or the already
+              dnl      constructed $INCNAME,
+              dnl   4. if it doesn't exist as a directory.
+              if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INC[]NAME; do
+                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                      dnl Really add $additional_includedir to $INCNAME.
+                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+            dnl Look for dependencies.
+            if test -n "$found_la"; then
+              dnl Read the .la file. It defines the variables
+              dnl dlname, library_names, old_library, dependency_libs, current,
+              dnl age, revision, installed, dlopen, dlpreopen, libdir.
+              save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+              dnl We use only dependency_libs.
+              for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+                    dnl But don't add it
+                    dnl   1. if it's the standard /usr/lib,
+                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
+                    dnl   3. if it's already present in $LDFLAGS or the already
+                    dnl      constructed $LIBNAME,
+                    dnl   4. if it doesn't exist as a directory.
+                    if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LIBNAME.
+                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LTLIBNAME.
+                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                      dnl Potentially add DIR to rpathdirs.
+                      dnl The rpathdirs will be appended to $LIBNAME at the end.
+                      haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                      dnl Potentially add DIR to ltrpathdirs.
+                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                      haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                    dnl Handle this in the next round.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                    dnl Handle this in the next round. Throw away the .la's
+                    dnl directory; it is already contained in a preceding -L
+                    dnl option.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                    dnl Most likely an immediate library name.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+            dnl Didn't find the library; assume it is in the system directories
+            dnl known to the linker and runtime loader. (All the system
+            dnl directories known to the linker should also be known to the
+            dnl runtime loader, otherwise the system is severely misconfigured.)
+            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+      dnl Weird platform: only the last -rpath option counts, the user must
+      dnl pass all path elements in one option. We can arrange that for a
+      dnl single library, but not when more than one $LIBNAMEs are used.
+      alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+      dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+      acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+    else
+      dnl The -rpath options are cumulative.
+      for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+    dnl When using libtool, the option that works for both libraries and
+    dnl executables is -R. The -R options are cumulative.
+    for found_dir in $ltrpathdirs; do
+      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+    done
+  fi
+  popdef([P_A_C_K])
+  popdef([PACKLIBS])
+  popdef([PACKUP])
+  popdef([PACK])
+  popdef([NAME])
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+  for element in [$2]; do
+    haveit=
+    for x in $[$1]; do
+      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      [$1]="${[$1]}${[$1]:+ }$element"
+    fi
+  done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+  AC_REQUIRE([AC_LIB_RPATH])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  $1=
+  if test "$enable_rpath" != no; then
+    if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+      dnl Use an explicit option to hardcode directories into the resulting
+      dnl binary.
+      rpathdirs=
+      next=
+      for opt in $2; do
+        if test -n "$next"; then
+          dir="$next"
+          dnl No need to hardcode the standard /usr/lib.
+          if test "X$dir" != "X/usr/$acl_libdirstem" \
+             && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+            rpathdirs="$rpathdirs $dir"
+          fi
+          next=
+        else
+          case $opt in
+            -L) next=yes ;;
+            -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+                 dnl No need to hardcode the standard /usr/lib.
+                 if test "X$dir" != "X/usr/$acl_libdirstem" \
+                    && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+                   rpathdirs="$rpathdirs $dir"
+                 fi
+                 next= ;;
+            *) next= ;;
+          esac
+        fi
+      done
+      if test "X$rpathdirs" != "X"; then
+        if test -n ""$3""; then
+          dnl libtool is used for linking. Use -R options.
+          for dir in $rpathdirs; do
+            $1="${$1}${$1:+ }-R$dir"
+          done
+        else
+          dnl The linker is used for linking directly.
+          if test -n "$acl_hardcode_libdir_separator"; then
+            dnl Weird platform: only the last -rpath option counts, the user
+            dnl must pass all path elements in one option.
+            alldirs=
+            for dir in $rpathdirs; do
+              alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+            done
+            acl_save_libdir="$libdir"
+            libdir="$alldirs"
+            eval flag=\"$acl_hardcode_libdir_flag_spec\"
+            libdir="$acl_save_libdir"
+            $1="$flag"
+          else
+            dnl The -rpath options are cumulative.
+            for dir in $rpathdirs; do
+              acl_save_libdir="$libdir"
+              libdir="$dir"
+              eval flag=\"$acl_hardcode_libdir_flag_spec\"
+              libdir="$acl_save_libdir"
+              $1="${$1}${$1:+ }$flag"
+            done
+          fi
+        fi
+      fi
+    fi
+  fi
+  AC_SUBST([$1])
+])
diff --git a/config/lib-prefix.m4 b/config/lib-prefix.m4
new file mode 100644
index 0000000..31f49e4
--- /dev/null
+++ b/config/lib-prefix.m4
@@ -0,0 +1,224 @@
+# lib-prefix.m4 serial 7 (gettext-0.18)
+dnl Copyright (C) 2001-2005, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+  AC_REQUIRE([AC_PROG_CC])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_LIB_ARG_WITH([lib-prefix],
+[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+  --without-lib-prefix    don't search for libraries in includedir and libdir],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+      fi
+    fi
+])
+  if test $use_additional = yes; then
+    dnl Potentially add $additional_includedir to $CPPFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/include,
+    dnl   2. if it's already present in $CPPFLAGS,
+    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_includedir" != "X/usr/include"; then
+      haveit=
+      for x in $CPPFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-I$additional_includedir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_includedir" = "X/usr/local/include"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_includedir"; then
+            dnl Really add $additional_includedir to $CPPFLAGS.
+            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+          fi
+        fi
+      fi
+    fi
+    dnl Potentially add $additional_libdir to $LDFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/lib,
+    dnl   2. if it's already present in $LDFLAGS,
+    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+      haveit=
+      for x in $LDFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-L$additional_libdir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux*) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_libdir"; then
+            dnl Really add $additional_libdir to $LDFLAGS.
+            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+          fi
+        fi
+      fi
+    fi
+  fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+  dnl Unfortunately, prefix and exec_prefix get only finally determined
+  dnl at the end of configure.
+  if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  $1
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates
+dnl - a variable acl_libdirstem, containing the basename of the libdir, either
+dnl   "lib" or "lib64" or "lib/64",
+dnl - a variable acl_libdirstem2, as a secondary possible value for
+dnl   acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
+dnl   "lib/amd64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+  dnl There is no formal standard regarding lib and lib64.
+  dnl On glibc systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
+  dnl the compiler's default mode by looking at the compiler's library search
+  dnl path. If at least one of its elements ends in /lib64 or points to a
+  dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
+  dnl Otherwise we use the default, namely "lib".
+  dnl On Solaris systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
+  dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  acl_libdirstem=lib
+  acl_libdirstem2=
+  case "$host_os" in
+    solaris*)
+      dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
+      dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
+      dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
+      dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
+      dnl symlink is missing, so we set acl_libdirstem2 too.
+      AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
+        [AC_EGREP_CPP([sixtyfour bits], [
+#ifdef _LP64
+sixtyfour bits
+#endif
+           ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
+        ])
+      if test $gl_cv_solaris_64bit = yes; then
+        acl_libdirstem=lib/64
+        case "$host_cpu" in
+          sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+          i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+        esac
+      fi
+      ;;
+    *)
+      searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+      if test -n "$searchpath"; then
+        acl_save_IFS="${IFS= 	}"; IFS=":"
+        for searchdir in $searchpath; do
+          if test -d "$searchdir"; then
+            case "$searchdir" in
+              */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+              */../ | */.. )
+                # Better ignore directories of this form. They are misleading.
+                ;;
+              *) searchdir=`cd "$searchdir" && pwd`
+                 case "$searchdir" in
+                   */lib64 ) acl_libdirstem=lib64 ;;
+                 esac ;;
+            esac
+          fi
+        done
+        IFS="$acl_save_IFS"
+      fi
+      ;;
+  esac
+  test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+])
diff --git a/config/lock.m4 b/config/lock.m4
new file mode 100644
index 0000000..73a3c54
--- /dev/null
+++ b/config/lock.m4
@@ -0,0 +1,42 @@
+# lock.m4 serial 13 (gettext-0.18.2)
+dnl Copyright (C) 2005-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gl_LOCK],
+[
+  AC_REQUIRE([gl_THREADLIB])
+  if test "$gl_threads_api" = posix; then
+    # OSF/1 4.0 and Mac OS X 10.1 lack the pthread_rwlock_t type and the
+    # pthread_rwlock_* functions.
+    AC_CHECK_TYPE([pthread_rwlock_t],
+      [AC_DEFINE([HAVE_PTHREAD_RWLOCK], [1],
+         [Define if the POSIX multithreading library has read/write locks.])],
+      [],
+      [#include <pthread.h>])
+    # glibc defines PTHREAD_MUTEX_RECURSIVE as enum, not as a macro.
+    AC_COMPILE_IFELSE([
+      AC_LANG_PROGRAM(
+        [[#include <pthread.h>]],
+        [[
+#if __FreeBSD__ == 4
+error "No, in FreeBSD 4.0 recursive mutexes actually don't work."
+#elif (defined __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ \
+       && __ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__ < 1070)
+error "No, in Mac OS X < 10.7 recursive mutexes actually don't work."
+#else
+int x = (int)PTHREAD_MUTEX_RECURSIVE;
+return !x;
+#endif
+        ]])],
+      [AC_DEFINE([HAVE_PTHREAD_MUTEX_RECURSIVE], [1],
+         [Define if the <pthread.h> defines PTHREAD_MUTEX_RECURSIVE.])])
+  fi
+  gl_PREREQ_LOCK
+])
+
+# Prerequisites of lib/glthread/lock.c.
+AC_DEFUN([gl_PREREQ_LOCK], [:])
diff --git a/config/longlong.m4 b/config/longlong.m4
new file mode 100644
index 0000000..eefb37c
--- /dev/null
+++ b/config/longlong.m4
@@ -0,0 +1,113 @@
+# longlong.m4 serial 17
+dnl Copyright (C) 1999-2007, 2009-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_LONG_LONG_INT if 'long long int' works.
+# This fixes a bug in Autoconf 2.61, and can be faster
+# than what's in Autoconf 2.62 through 2.68.
+
+# Note: If the type 'long long int' exists but is only 32 bits large
+# (as on some very old compilers), HAVE_LONG_LONG_INT will not be
+# defined. In this case you can treat 'long long int' like 'long int'.
+
+AC_DEFUN([AC_TYPE_LONG_LONG_INT],
+[
+  AC_REQUIRE([AC_TYPE_UNSIGNED_LONG_LONG_INT])
+  AC_CACHE_CHECK([for long long int], [ac_cv_type_long_long_int],
+     [ac_cv_type_long_long_int=yes
+      if test "x${ac_cv_prog_cc_c99-no}" = xno; then
+        ac_cv_type_long_long_int=$ac_cv_type_unsigned_long_long_int
+        if test $ac_cv_type_long_long_int = yes; then
+          dnl Catch a bug in Tandem NonStop Kernel (OSS) cc -O circa 2004.
+          dnl If cross compiling, assume the bug is not important, since
+          dnl nobody cross compiles for this platform as far as we know.
+          AC_RUN_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[@%:@include <limits.h>
+                 @%:@ifndef LLONG_MAX
+                 @%:@ define HALF \
+                          (1LL << (sizeof (long long int) * CHAR_BIT - 2))
+                 @%:@ define LLONG_MAX (HALF - 1 + HALF)
+                 @%:@endif]],
+               [[long long int n = 1;
+                 int i;
+                 for (i = 0; ; i++)
+                   {
+                     long long int m = n << i;
+                     if (m >> i != n)
+                       return 1;
+                     if (LLONG_MAX / 2 < m)
+                       break;
+                   }
+                 return 0;]])],
+            [],
+            [ac_cv_type_long_long_int=no],
+            [:])
+        fi
+      fi])
+  if test $ac_cv_type_long_long_int = yes; then
+    AC_DEFINE([HAVE_LONG_LONG_INT], [1],
+      [Define to 1 if the system has the type 'long long int'.])
+  fi
+])
+
+# Define HAVE_UNSIGNED_LONG_LONG_INT if 'unsigned long long int' works.
+# This fixes a bug in Autoconf 2.61, and can be faster
+# than what's in Autoconf 2.62 through 2.68.
+
+# Note: If the type 'unsigned long long int' exists but is only 32 bits
+# large (as on some very old compilers), AC_TYPE_UNSIGNED_LONG_LONG_INT
+# will not be defined. In this case you can treat 'unsigned long long int'
+# like 'unsigned long int'.
+
+AC_DEFUN([AC_TYPE_UNSIGNED_LONG_LONG_INT],
+[
+  AC_CACHE_CHECK([for unsigned long long int],
+    [ac_cv_type_unsigned_long_long_int],
+    [ac_cv_type_unsigned_long_long_int=yes
+     if test "x${ac_cv_prog_cc_c99-no}" = xno; then
+       AC_LINK_IFELSE(
+         [_AC_TYPE_LONG_LONG_SNIPPET],
+         [],
+         [ac_cv_type_unsigned_long_long_int=no])
+     fi])
+  if test $ac_cv_type_unsigned_long_long_int = yes; then
+    AC_DEFINE([HAVE_UNSIGNED_LONG_LONG_INT], [1],
+      [Define to 1 if the system has the type 'unsigned long long int'.])
+  fi
+])
+
+# Expands to a C program that can be used to test for simultaneous support
+# of 'long long' and 'unsigned long long'. We don't want to say that
+# 'long long' is available if 'unsigned long long' is not, or vice versa,
+# because too many programs rely on the symmetry between signed and unsigned
+# integer types (excluding 'bool').
+AC_DEFUN([_AC_TYPE_LONG_LONG_SNIPPET],
+[
+  AC_LANG_PROGRAM(
+    [[/* For now, do not test the preprocessor; as of 2007 there are too many
+         implementations with broken preprocessors.  Perhaps this can
+         be revisited in 2012.  In the meantime, code should not expect
+         #if to work with literals wider than 32 bits.  */
+      /* Test literals.  */
+      long long int ll = 9223372036854775807ll;
+      long long int nll = -9223372036854775807LL;
+      unsigned long long int ull = 18446744073709551615ULL;
+      /* Test constant expressions.   */
+      typedef int a[((-9223372036854775807LL < 0 && 0 < 9223372036854775807ll)
+                     ? 1 : -1)];
+      typedef int b[(18446744073709551615ULL <= (unsigned long long int) -1
+                     ? 1 : -1)];
+      int i = 63;]],
+    [[/* Test availability of runtime routines for shift and division.  */
+      long long int llmax = 9223372036854775807ll;
+      unsigned long long int ullmax = 18446744073709551615ull;
+      return ((ll << 63) | (ll >> 63) | (ll < i) | (ll > i)
+              | (llmax / ll) | (llmax % ll)
+              | (ull << 63) | (ull >> 63) | (ull << i) | (ull >> i)
+              | (ullmax / ull) | (ullmax % ull));]])
+])
diff --git a/config/mdate-sh b/config/mdate-sh
new file mode 100755
index 0000000..e8dfaca
--- /dev/null
+++ b/config/mdate-sh
@@ -0,0 +1,224 @@
+#!/bin/sh
+# Get modification time of a file or directory and pretty-print it.
+
+scriptversion=2010-08-21.06; # UTC
+
+# Copyright (C) 1995-2014 Free Software Foundation, Inc.
+# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+fi
+
+case $1 in
+  '')
+     echo "$0: No file.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: mdate-sh [--help] [--version] FILE
+
+Pretty-print the modification day of FILE, in the format:
+1 January 1970
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "mdate-sh $scriptversion"
+    exit $?
+    ;;
+esac
+
+error ()
+{
+  echo "$0: $1" >&2
+  exit 1
+}
+
+
+# Prevent date giving response in another language.
+LANG=C
+export LANG
+LC_ALL=C
+export LC_ALL
+LC_TIME=C
+export LC_TIME
+
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable.  Since we cannot assume 'unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+  TIME_STYLE=posix-long-iso
+  export TIME_STYLE
+fi
+
+save_arg1=$1
+
+# Find out how to get the extended ls output of a file or directory.
+if ls -L /dev/null 1>/dev/null 2>&1; then
+  ls_command='ls -L -l -d'
+else
+  ls_command='ls -l -d'
+fi
+# Avoid user/group names that might have spaces, when possible.
+if ls -n /dev/null 1>/dev/null 2>&1; then
+  ls_command="$ls_command -n"
+fi
+
+# A 'ls -l' line looks as follows on OS/2.
+#  drwxrwx---        0 Aug 11  2001 foo
+# This differs from Unix, which adds ownership information.
+#  drwxrwx---   2 root  root      4096 Aug 11  2001 foo
+#
+# To find the date, we split the line on spaces and iterate on words
+# until we find a month.  This cannot work with files whose owner is a
+# user named "Jan", or "Feb", etc.  However, it's unlikely that '/'
+# will be owned by a user whose name is a month.  So we first look at
+# the extended ls output of the root directory to decide how many
+# words should be skipped to get the date.
+
+# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
+set x`$ls_command /`
+
+# Find which argument is the month.
+month=
+command=
+until test $month
+do
+  test $# -gt 0 || error "failed parsing '$ls_command /' output"
+  shift
+  # Add another shift to the command.
+  command="$command shift;"
+  case $1 in
+    Jan) month=January; nummonth=1;;
+    Feb) month=February; nummonth=2;;
+    Mar) month=March; nummonth=3;;
+    Apr) month=April; nummonth=4;;
+    May) month=May; nummonth=5;;
+    Jun) month=June; nummonth=6;;
+    Jul) month=July; nummonth=7;;
+    Aug) month=August; nummonth=8;;
+    Sep) month=September; nummonth=9;;
+    Oct) month=October; nummonth=10;;
+    Nov) month=November; nummonth=11;;
+    Dec) month=December; nummonth=12;;
+  esac
+done
+
+test -n "$month" || error "failed parsing '$ls_command /' output"
+
+# Get the extended ls output of the file or directory.
+set dummy x`eval "$ls_command \"\\\$save_arg1\""`
+
+# Remove all preceding arguments
+eval $command
+
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
+  Jan) month=January; nummonth=1;;
+  Feb) month=February; nummonth=2;;
+  Mar) month=March; nummonth=3;;
+  Apr) month=April; nummonth=4;;
+  May) month=May; nummonth=5;;
+  Jun) month=June; nummonth=6;;
+  Jul) month=July; nummonth=7;;
+  Aug) month=August; nummonth=8;;
+  Sep) month=September; nummonth=9;;
+  Oct) month=October; nummonth=10;;
+  Nov) month=November; nummonth=11;;
+  Dec) month=December; nummonth=12;;
+esac
+
+case $3 in
+  ???*) day=$1;;
+  *) day=$3; shift;;
+esac
+
+# Here we have to deal with the problem that the ls output gives either
+# the time of day or the year.
+case $3 in
+  *:*) set `date`; eval year=\$$#
+       case $2 in
+	 Jan) nummonthtod=1;;
+	 Feb) nummonthtod=2;;
+	 Mar) nummonthtod=3;;
+	 Apr) nummonthtod=4;;
+	 May) nummonthtod=5;;
+	 Jun) nummonthtod=6;;
+	 Jul) nummonthtod=7;;
+	 Aug) nummonthtod=8;;
+	 Sep) nummonthtod=9;;
+	 Oct) nummonthtod=10;;
+	 Nov) nummonthtod=11;;
+	 Dec) nummonthtod=12;;
+       esac
+       # For the first six month of the year the time notation can also
+       # be used for files modified in the last year.
+       if (expr $nummonth \> $nummonthtod) > /dev/null;
+       then
+	 year=`expr $year - 1`
+       fi;;
+  *) year=$3;;
+esac
+
+# The result.
+echo $day $month $year
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/missing b/config/missing
new file mode 100755
index 0000000..f62bbae
--- /dev/null
+++ b/config/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2013-10-28.13; # UTC
+
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config/nls.m4 b/config/nls.m4
new file mode 100644
index 0000000..53cdc8b
--- /dev/null
+++ b/config/nls.m4
@@ -0,0 +1,32 @@
+# nls.m4 serial 5 (gettext-0.18)
+dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_NLS],
+[
+  AC_MSG_CHECKING([whether NLS is requested])
+  dnl Default is enabled NLS
+  AC_ARG_ENABLE([nls],
+    [  --disable-nls           do not use Native Language Support],
+    USE_NLS=$enableval, USE_NLS=yes)
+  AC_MSG_RESULT([$USE_NLS])
+  AC_SUBST([USE_NLS])
+])
diff --git a/config/po.m4 b/config/po.m4
new file mode 100644
index 0000000..43012dc
--- /dev/null
+++ b/config/po.m4
@@ -0,0 +1,453 @@
+# po.m4 serial 24 (gettext-0.19)
+dnl Copyright (C) 1995-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.60])
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+  AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+  AC_REQUIRE([AC_PROG_SED])dnl
+  AC_REQUIRE([AM_NLS])dnl
+
+  dnl Release version of the gettext macros. This is used to ensure that
+  dnl the gettext macros and po/Makefile.in.in are in sync.
+  AC_SUBST([GETTEXT_MACRO_VERSION], [0.19])
+
+  dnl Perform the following tests also if --disable-nls has been given,
+  dnl because they are needed for "make dist" to work.
+
+  dnl Search for GNU msgfmt in the PATH.
+  dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+  dnl The second test excludes FreeBSD msgfmt.
+  AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+    [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
+
+  dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+  case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+    *) MSGFMT_015=$MSGFMT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([GMSGFMT_015])
+
+  dnl Search for GNU xgettext 0.12 or newer in the PATH.
+  dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+  dnl The second test excludes FreeBSD xgettext.
+  AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+    [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  dnl Remove leftover from FreeBSD xgettext call.
+  rm -f messages.po
+
+  dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+  case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([XGETTEXT_015])
+
+  dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+  AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+    [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+  dnl Installation directories.
+  dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
+  dnl have to define it here, so that it can be used in po/Makefile.
+  test -n "$localedir" || localedir='${datadir}/locale'
+  AC_SUBST([localedir])
+
+  dnl Support for AM_XGETTEXT_OPTION.
+  test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+  AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+  AC_CONFIG_COMMANDS([po-directories], [[
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          gt_tab=`printf '\t'`
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            # Hide the ALL_LINGUAS assignment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            # Hide the ALL_LINGUAS assignment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done]],
+   [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+    # from automake < 1.5.
+    eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+   ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+  # When this code is run, in config.status, two variables have already been
+  # set:
+  # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+  # - LINGUAS is the value of the environment variable LINGUAS at configure
+  #   time.
+
+changequote(,)dnl
+  # Adjust a relative srcdir.
+  ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+  ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+  ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+  # In autoconf-2.13 it is called $ac_given_srcdir.
+  # In autoconf-2.50 it is called $srcdir.
+  test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+  case "$ac_given_srcdir" in
+    .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+    /*) top_srcdir="$ac_given_srcdir" ;;
+    *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  # Find a way to echo strings without interpreting backslash.
+  if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+    gt_echo='echo'
+  else
+    if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+      gt_echo='printf %s\n'
+    else
+      echo_func () {
+        cat <<EOT
+$*
+EOT
+      }
+      gt_echo='echo_func'
+    fi
+  fi
+
+  # A sed script that extracts the value of VARIABLE from a Makefile.
+  tab=`printf '\t'`
+  sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
+  # Seen the first line of the variable definition.
+  s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
+  ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+  # Set POTFILES to the value of the Makefile variable POTFILES.
+  sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+  POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+  # Compute POTFILES_DEPS as
+  #   $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+  POTFILES_DEPS=
+  for file in $POTFILES; do
+    POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+  done
+  POMAKEFILEDEPS=""
+
+  if test -n "$OBSOLETE_ALL_LINGUAS"; then
+    test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+  fi
+  if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+    # The LINGUAS file contains the set of available languages.
+    ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+    POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+  else
+    # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+    sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+    ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+  fi
+  # Hide the ALL_LINGUAS assignment from automake < 1.5.
+  eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+  # Compute POFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+  # Compute UPDATEPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+  # Compute DUMMYPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+  # Compute GMOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+  # Compute PROPERTIESFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+  # Compute CLASSFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+  # Compute QMFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+  # Compute MSGFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+  # Compute RESOURCESDLLFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+  case "$ac_given_srcdir" in
+    .) srcdirpre= ;;
+    *) srcdirpre='$(srcdir)/' ;;
+  esac
+  POFILES=
+  UPDATEPOFILES=
+  DUMMYPOFILES=
+  GMOFILES=
+  PROPERTIESFILES=
+  CLASSFILES=
+  QMFILES=
+  MSGFILES=
+  RESOURCESDLLFILES=
+  for lang in $ALL_LINGUAS; do
+    POFILES="$POFILES $srcdirpre$lang.po"
+    UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+    DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+    GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+    PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+    CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+    QMFILES="$QMFILES $srcdirpre$lang.qm"
+    frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+    MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+    frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+    RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+  done
+  # CATALOGS depends on both $ac_dir and the user's LINGUAS
+  # environment variable.
+  INST_LINGUAS=
+  if test -n "$ALL_LINGUAS"; then
+    for presentlang in $ALL_LINGUAS; do
+      useit=no
+      if test "%UNSET%" != "$LINGUAS"; then
+        desiredlanguages="$LINGUAS"
+      else
+        desiredlanguages="$ALL_LINGUAS"
+      fi
+      for desiredlang in $desiredlanguages; do
+        # Use the presentlang catalog if desiredlang is
+        #   a. equal to presentlang, or
+        #   b. a variant of presentlang (because in this case,
+        #      presentlang can be used as a fallback for messages
+        #      which are not translated in the desiredlang catalog).
+        case "$desiredlang" in
+          "$presentlang"*) useit=yes;;
+        esac
+      done
+      if test $useit = yes; then
+        INST_LINGUAS="$INST_LINGUAS $presentlang"
+      fi
+    done
+  fi
+  CATALOGS=
+  JAVACATALOGS=
+  QTCATALOGS=
+  TCLCATALOGS=
+  CSHARPCATALOGS=
+  if test -n "$INST_LINGUAS"; then
+    for lang in $INST_LINGUAS; do
+      CATALOGS="$CATALOGS $lang.gmo"
+      JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+      QTCATALOGS="$QTCATALOGS $lang.qm"
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+    done
+  fi
+
+  sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+  tab=`printf '\t'`
+  if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if test -n "$POMAKEFILEDEPS"; then
+    cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+  fi
+  mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+  XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+  AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+  XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
diff --git a/config/printf-posix.m4 b/config/printf-posix.m4
new file mode 100644
index 0000000..3be95c1
--- /dev/null
+++ b/config/printf-posix.m4
@@ -0,0 +1,48 @@
+# printf-posix.m4 serial 6 (gettext-0.18.2)
+dnl Copyright (C) 2003, 2007, 2009-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the printf() function supports POSIX/XSI format strings with
+dnl positions.
+
+AC_DEFUN([gt_PRINTF_POSIX],
+[
+  AC_REQUIRE([AC_PROG_CC])
+  AC_CACHE_CHECK([whether printf() supports POSIX/XSI format strings],
+    gt_cv_func_printf_posix,
+    [
+      AC_RUN_IFELSE(
+        [AC_LANG_SOURCE([[
+#include <stdio.h>
+#include <string.h>
+/* The string "%2$d %1$d", with dollar characters protected from the shell's
+   dollar expansion (possibly an autoconf bug).  */
+static char format[] = { '%', '2', '$', 'd', ' ', '%', '1', '$', 'd', '\0' };
+static char buf[100];
+int main ()
+{
+  sprintf (buf, format, 33, 55);
+  return (strcmp (buf, "55 33") != 0);
+}]])],
+        [gt_cv_func_printf_posix=yes],
+        [gt_cv_func_printf_posix=no],
+        [
+          AC_EGREP_CPP([notposix], [
+#if defined __NetBSD__ || defined __BEOS__ || defined _MSC_VER || defined __MINGW32__ || defined __CYGWIN__
+  notposix
+#endif
+            ],
+            [gt_cv_func_printf_posix="guessing no"],
+            [gt_cv_func_printf_posix="guessing yes"])
+        ])
+    ])
+  case $gt_cv_func_printf_posix in
+    *yes)
+      AC_DEFINE([HAVE_POSIX_PRINTF], [1],
+        [Define if your printf() function supports format strings with positions.])
+      ;;
+  esac
+])
diff --git a/config/progtest.m4 b/config/progtest.m4
new file mode 100644
index 0000000..b499f79
--- /dev/null
+++ b/config/progtest.m4
@@ -0,0 +1,91 @@
+# progtest.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1996-2003, 2005, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+AC_PREREQ([2.50])
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL([ac_cv_path_$1],
+[case "[$]$1" in
+  [[\\/]]* | ?:[[\\/]]*)
+    ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in ifelse([$5], , $PATH, [$5]); do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+          if [$3]; then
+            ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+    ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+  AC_MSG_RESULT([$][$1])
+else
+  AC_MSG_RESULT([no])
+fi
+AC_SUBST([$1])dnl
+])
diff --git a/config/size_max.m4 b/config/size_max.m4
new file mode 100644
index 0000000..7e192d5
--- /dev/null
+++ b/config/size_max.m4
@@ -0,0 +1,79 @@
+# size_max.m4 serial 10
+dnl Copyright (C) 2003, 2005-2006, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gl_SIZE_MAX],
+[
+  AC_CHECK_HEADERS([stdint.h])
+  dnl First test whether the system already has SIZE_MAX.
+  AC_CACHE_CHECK([for SIZE_MAX], [gl_cv_size_max], [
+    gl_cv_size_max=
+    AC_EGREP_CPP([Found it], [
+#include <limits.h>
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef SIZE_MAX
+Found it
+#endif
+], [gl_cv_size_max=yes])
+    if test -z "$gl_cv_size_max"; then
+      dnl Define it ourselves. Here we assume that the type 'size_t' is not wider
+      dnl than the type 'unsigned long'. Try hard to find a definition that can
+      dnl be used in a preprocessor #if, i.e. doesn't contain a cast.
+      AC_COMPUTE_INT([size_t_bits_minus_1], [sizeof (size_t) * CHAR_BIT - 1],
+        [#include <stddef.h>
+#include <limits.h>], [size_t_bits_minus_1=])
+      AC_COMPUTE_INT([fits_in_uint], [sizeof (size_t) <= sizeof (unsigned int)],
+        [#include <stddef.h>], [fits_in_uint=])
+      if test -n "$size_t_bits_minus_1" && test -n "$fits_in_uint"; then
+        if test $fits_in_uint = 1; then
+          dnl Even though SIZE_MAX fits in an unsigned int, it must be of type
+          dnl 'unsigned long' if the type 'size_t' is the same as 'unsigned long'.
+          AC_COMPILE_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[#include <stddef.h>
+                 extern size_t foo;
+                 extern unsigned long foo;
+               ]],
+               [[]])],
+            [fits_in_uint=0])
+        fi
+        dnl We cannot use 'expr' to simplify this expression, because 'expr'
+        dnl works only with 'long' integers in the host environment, while we
+        dnl might be cross-compiling from a 32-bit platform to a 64-bit platform.
+        if test $fits_in_uint = 1; then
+          gl_cv_size_max="(((1U << $size_t_bits_minus_1) - 1) * 2 + 1)"
+        else
+          gl_cv_size_max="(((1UL << $size_t_bits_minus_1) - 1) * 2 + 1)"
+        fi
+      else
+        dnl Shouldn't happen, but who knows...
+        gl_cv_size_max='((size_t)~(size_t)0)'
+      fi
+    fi
+  ])
+  if test "$gl_cv_size_max" != yes; then
+    AC_DEFINE_UNQUOTED([SIZE_MAX], [$gl_cv_size_max],
+      [Define as the maximum value of type 'size_t', if the system doesn't define it.])
+  fi
+  dnl Don't redefine SIZE_MAX in config.h if config.h is re-included after
+  dnl <stdint.h>. Remember that the #undef in AH_VERBATIM gets replaced with
+  dnl #define by AC_DEFINE_UNQUOTED.
+  AH_VERBATIM([SIZE_MAX],
+[/* Define as the maximum value of type 'size_t', if the system doesn't define
+   it. */
+#ifndef SIZE_MAX
+# undef SIZE_MAX
+#endif])
+])
+
+dnl Autoconf >= 2.61 has AC_COMPUTE_INT built-in.
+dnl Remove this when we can assume autoconf >= 2.61.
+m4_ifdef([AC_COMPUTE_INT], [], [
+  AC_DEFUN([AC_COMPUTE_INT], [_AC_COMPUTE_INT([$2],[$1],[$3],[$4])])
+])
diff --git a/config/stdint_h.m4 b/config/stdint_h.m4
new file mode 100644
index 0000000..7fc2ce9
--- /dev/null
+++ b/config/stdint_h.m4
@@ -0,0 +1,27 @@
+# stdint_h.m4 serial 9
+dnl Copyright (C) 1997-2004, 2006, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_STDINT_H],
+[
+  AC_CACHE_CHECK([for stdint.h], [gl_cv_header_stdint_h],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <sys/types.h>
+            #include <stdint.h>]],
+          [[uintmax_t i = (uintmax_t) -1; return !i;]])],
+       [gl_cv_header_stdint_h=yes],
+       [gl_cv_header_stdint_h=no])])
+  if test $gl_cv_header_stdint_h = yes; then
+    AC_DEFINE_UNQUOTED([HAVE_STDINT_H_WITH_UINTMAX], [1],
+      [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+       and declares uintmax_t. ])
+  fi
+])
diff --git a/config/texinfo.tex b/config/texinfo.tex
new file mode 100644
index 0000000..c8913ab
--- /dev/null
+++ b/config/texinfo.tex
@@ -0,0 +1,11676 @@
+% texinfo.tex -- TeX macros to handle Texinfo files.
+% 
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2016-09-18.18}
+%
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
+% Free Software Foundation, Inc.
+%
+% This texinfo.tex file is free software: you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation, either version 3 of the
+% License, or (at your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program.  If not, see <http://www.gnu.org/licenses/>.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction. This Exception is an additional permission under section 7
+% of the GNU General Public License, version 3 ("GPLv3").
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org.  Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem.  Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution.  For a simple
+% manual foo.texi, however, you can get away with this:
+%   tex foo.texi
+%   texindex foo.??
+%   tex foo.texi
+%   tex foo.texi
+%   dvips foo.dvi -o  # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent.  You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+  \catcode`+=\active \catcode`\_=\active}
+
+% LaTeX's \typeout.  This ensures that the messages it is used for
+% are identical in format to the corresponding ones from latex/pdflatex.
+\def\typeout{\immediate\write17}%
+
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
+\let\ptexb=\b
+\let\ptexbullet=\bullet
+\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
+\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexraggedright=\raggedright
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexsp=\sp
+\let\ptexstar=\*
+\let\ptexsup=\sup
+\let\ptext=\t
+\let\ptextop=\top
+{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
+
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putworderror\undefined     \gdef\putworderror{error}\fi
+\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
+
+% Give the space character the catcode for a space.
+\def\spaceisspace{\catcode`\ =10\relax}
+
+\chardef\dashChar  = `\-
+\chardef\slashChar = `\/
+\chardef\underChar = `\_
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+  ap-pen-dix bit-map bit-maps
+  data-base data-bases eshell fall-ing half-way long-est man-u-script
+  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  spell-ing spell-ings
+  stand-alone strong-est time-stamp time-stamps which-ever white-space
+  wide-spread wrap-around
+}
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal.  We don't just call \tracingall here,
+% since that produces some useless output on the terminal.  We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+  \tracingstats2
+  \tracingpages1
+  \tracinglostchars2  % 2 gives us more in etex
+  \tracingparagraphs1
+  \tracingoutput1
+  \tracingmacros2
+  \tracingrestores1
+  \showboxbreadth\maxdimen \showboxdepth\maxdimen
+  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
+    \tracingscantokens1
+    \tracingifs1
+    \tracinggroups1
+    \tracingnesting2
+    \tracingassigns1
+  \fi
+  \tracingcommands3  % 3 gives us more in etex
+  \errorcontextlines16
+}%
+
+% @errormsg{MSG}.  Do the index-like expansions on MSG, but if things
+% aren't perfect, it's not the end of the world, being an error message,
+% after all.
+% 
+\def\errormsg{\begingroup \indexnofonts \doerrormsg}
+\def\doerrormsg#1{\errmessage{#1}}
+
+% add check for \lastpenalty to plain's definitions.  If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+  \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+  \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+  \removelastskip\penalty-200\bigskip\fi\fi}
+
+% Output routine
+%
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt }
+
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
+%
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong  \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page.
+
+% \domark is called twice inside \chapmacro, to add one
+% mark before the section break, and one after.
+%   In the second call \prevchapterdefs is the same as \lastchapterdefs,
+% and \prevsectiondefs is the same as \lastsectiondefs.
+%   Then if the page is not broken at the mark, some of the previous
+% section appears on the page, and we can get the name of this section
+% from \firstmark for @everyheadingmarks top.
+%   @everyheadingmarks bottom uses \botmark.
+%
+% See page 260 of The TeXbook.
+\def\domark{%
+  \toks0=\expandafter{\lastchapterdefs}%
+  \toks2=\expandafter{\lastsectiondefs}%
+  \toks4=\expandafter{\prevchapterdefs}%
+  \toks6=\expandafter{\prevsectiondefs}%
+  \toks8=\expandafter{\lastcolordefs}%
+  \mark{%
+                   \the\toks0 \the\toks2  % 0: marks for @everyheadingmarks top
+      \noexpand\or \the\toks4 \the\toks6  % 1: for @everyheadingmarks bottom
+    \noexpand\else \the\toks8             % 2: color marks
+  }%
+}
+
+% \gettopheadingmarks, \getbottomheadingmarks,
+% \getcolormarks - extract needed part of mark.
+%
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\lastsection{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\txipagewidth \newdimen\txipageheight
+
+% Main output routine.
+%
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
+
+% \onepageout takes a vbox as an argument.
+% \shipout a vbox for a single page, adding an optional header, footer,
+% cropmarks, and footnote.  This also causes index entries for this page
+% to be written to the auxiliary files.
+%
+\def\onepageout#1{%
+  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+  %
+  \ifodd\pageno  \advance\hoffset by \bindingoffset
+  \else \advance\hoffset by -\bindingoffset\fi
+  %
+  % Common context changes for both heading and footing.
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \def\commmonheadfootline{\let\hsize=\txipagewidth \texinfochars}
+  %
+  % Retrieve the information for the headings from the marks in the page,
+  % and call Plain TeX's \makeheadline and \makefootline, which use the
+  % values in \headline and \footline.
+  %
+  % This is used to check if we are on the first page of a chapter.
+  \ifcase1\topmark\fi
+  \let\prevchaptername\thischaptername
+  \ifcase0\firstmark\fi
+  \let\curchaptername\thischaptername
+  %
+  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
+  %
+  \ifx\curchaptername\prevchaptername
+    \let\thischapterheading\thischapter
+  \else
+    % \thischapterheading is the same as \thischapter except it is blank
+    % for the first page of a chapter.  This is to prevent the chapter name 
+    % being shown twice.
+    \def\thischapterheading{}%
+  \fi
+  %
+  \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
+  \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}%
+  %
+  {%
+    % Set context for writing to auxiliary files like index files.
+    % Have to do this stuff outside the \shipout because we want it to
+    % take effect in \write's, yet the group defined by the \vbox ends
+    % before the \shipout runs.
+    %
+    \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be
+               % {\code {{\backslashcurfont }acronym}
+    \shipout\vbox{%
+      % Do this early so pdf references go to the beginning of the page.
+      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+      %
+      \ifcropmarks \vbox to \outervsize\bgroup
+        \hsize = \outerhsize
+        \vskip-\topandbottommargin
+        \vtop to0pt{%
+          \line{\ewtop\hfil\ewtop}%
+          \nointerlineskip
+          \line{%
+            \vbox{\moveleft\cornerthick\nstop}%
+            \hfill
+            \vbox{\moveright\cornerthick\nstop}%
+          }%
+          \vss}%
+        \vskip\topandbottommargin
+        \line\bgroup
+          \hfil % center the page within the outer (page) hsize.
+          \ifodd\pageno\hskip\bindingoffset\fi
+          \vbox\bgroup
+      \fi
+      %
+      \unvbox\headlinebox
+      \pagebody{#1}%
+      \ifdim\ht\footlinebox > 0pt
+        % Only leave this space if the footline is nonempty.
+        % (We lessened \vsize for it in \oddfootingyyy.)
+        % The \baselineskip=24pt in plain's \makefootline has no effect.
+        \vskip 24pt
+        \unvbox\footlinebox
+      \fi
+      %
+      \ifcropmarks
+          \egroup % end of \vbox\bgroup
+        \hfil\egroup % end of (centering) \line\bgroup
+        \vskip\topandbottommargin plus1fill minus1fill
+        \boxmaxdepth = \cornerthick
+        \vbox to0pt{\vss
+          \line{%
+            \vbox{\moveleft\cornerthick\nsbot}%
+            \hfill
+            \vbox{\moveright\cornerthick\nsbot}%
+          }%
+          \nointerlineskip
+          \line{\ewbot\hfil\ewbot}%
+        }%
+      \egroup % \vbox from first cropmarks clause
+      \fi
+    }% end of \shipout\vbox
+  }% end of group with \indexdummies
+  \advancepageno
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
+
+% Main part of page, including any footnotes
+\def\pagebody#1{\vbox to\txipageheight{\boxmaxdepth=\maxdepth #1}}
+{\catcode`\@ =11
+\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
+\dimen@=\dp#1\relax \unvbox#1\relax
+\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
+\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
+}
+
+% Here are the rules for the cropmarks.  Note that they are
+% offset so that the space between them is truly \outerhsize or \outervsize
+% (P. A. MacKay, 12 November, 1986)
+%
+\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
+\def\nstop{\vbox
+  {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
+\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
+\def\nsbot{\vbox
+  {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+
+% Argument parsing
+
+% Parse an argument, then pass it to #1.  The argument is the rest of
+% the input line (except we remove a trailing comment).  #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+% For example, \def\foo{\parsearg\fooxxx}.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+  \def\argtorun{#2}%
+  \begingroup
+    \obeylines
+    \spaceisspace
+    #1%
+    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
+
+{\obeylines %
+  \gdef\parseargline#1^^M{%
+    \endgroup % End of the group started in \parsearg.
+    \argremovecomment #1\comment\ArgTerm%
+  }%
+}
+
+% First remove any @comment, then any @c comment.  Also remove a @texinfoc
+% comment (see \scanmacro for details).  Pass the result on to \argcheckspaces.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argremovetexinfoc #1\texinfoc\ArgTerm}
+\def\argremovetexinfoc#1\texinfoc#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+%    @end itemize  @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+  \def\temp{#3}%
+  \ifx\temp\empty
+    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
+    \let\temp\finishparsearg
+  \else
+    \let\temp\argcheckspaces
+  \fi
+  % Put the space token in:
+  \temp#1 #3\ArgTerm
+}
+
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \argtorun.
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
+
+
+% \parseargdef - define a command taking an argument on the line
+%
+% \parseargdef\foo{...}
+%	is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+\def\parseargdef#1{%
+  \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+  \def#2{\parsearg#1}%
+  \def#1##1%
+}
+
+% Several utility definitions with active space:
+{
+  \obeyspaces
+  \gdef\obeyedspace{ }
+
+  % Make each space character in the input produce a normal interword
+  % space in the output.  Don't allow a line break at this space, as this
+  % is used only in environments like @example, where each line of input
+  % should produce a line of output anyway.
+  %
+  \gdef\sepspaces{\obeyspaces\let =\tie}
+
+  % If an index command is used in an @example environment, any spaces
+  % therein should become regular spaces in the raw index file, not the
+  % expansion of \tie (\leavevmode \penalty \@M \ ).
+  \gdef\unsepspaces{\let =\space}
+}
+
+
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex.  It's used like this:
+%
+%   \envdef\foo{...}
+%   \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo.  \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches.  The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as environments; they don't open a group.  (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At run-time, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+  \def\temp{#1}%
+  \ifx\thisenv\temp
+  \else
+    \badenverr
+  \fi
+}
+
+% Environment mismatch, #1 expected:
+\def\badenverr{%
+  \errhelp = \EMsimple
+  \errmessage{This command can appear only \inenvironment\temp,
+    not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+  \ifx#1\empty
+    outside of any environment%
+  \else
+    in environment \expandafter\string#1%
+  \fi
+}
+
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+  \if 1\csname iscond.#1\endcsname
+  \else
+    % The general wording of \badenverr may not be ideal.
+    \expandafter\checkenv\csname#1\endcsname
+    \csname E#1\endcsname
+    \endgroup
+  \fi
+}
+
+\newhelp\EMsimple{Press RETURN to continue.}
+
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
+% @: forces normal size whitespace following.
+\def\:{\spacefactor=1000 }
+
+% @* forces a line break.
+\def\*{\unskip\hfil\break\hbox{}\ignorespaces}
+
+% @/ allows a line break.
+\let\/=\allowbreak
+
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
+
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
+
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
+  \fi\fi
+}
+
+% @w prevents a word break.  Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line.  According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0).  If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large.  This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material.  In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom.  The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+  \ifnum\catcode`\^^M=\active \else
+    \errhelp = \groupinvalidhelp
+    \errmessage{@group invalid in context where filling is enabled}%
+  \fi
+  \startsavinginserts
+  %
+  \setbox\groupbox = \vtop\bgroup
+    % Do @comment since we are called inside an environment such as
+    % @example, where each end-of-line in the input causes an
+    % end-of-line in the output.  We don't want the end-of-line after
+    % the `@group' to put extra space in the output.  Since @group
+    % should appear on a line by itself (according to the Texinfo
+    % manual), we don't worry about eating any user text.
+    \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it.  Thus, space below is not quite equal to space
+% above.  But it's pretty close.
+\def\Egroup{%
+    % To get correct interline space between the last line of the group
+    % and the first line afterwards, we have to propagate \prevdepth.
+    \endgraf % Not \par, as it may have been set to \lisppar.
+    \global\dimen1 = \prevdepth
+  \egroup           % End the \vtop.
+  \addgroupbox
+  \prevdepth = \dimen1
+  \checkinserts
+}
+
+\def\addgroupbox{
+  % \dimen0 is the vertical size of the group's box.
+  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+  % \dimen2 is how much space is left on the page (more or less).
+  \dimen2 = \txipageheight   \advance\dimen2 by -\pagetotal
+  % if the group doesn't fit on the current page, and it's a big big
+  % group, force a page break.
+  \ifdim \dimen0 > \dimen2
+    \ifdim \pagetotal < \vfilllimit\txipageheight
+      \page
+    \fi
+  \fi
+  \box\groupbox
+}
+
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil  \mil=0.001in
+
+\parseargdef\need{%
+  % Ensure vertical mode, so we don't make a big box in the middle of a
+  % paragraph.
+  \par
+  %
+  % If the @need value is less than one line space, it's useless.
+  \dimen0 = #1\mil
+  \dimen2 = \ht\strutbox
+  \advance\dimen2 by \dp\strutbox
+  \ifdim\dimen0 > \dimen2
+    %
+    % Do a \strut just to make the height of this box be normal, so the
+    % normal leading is inserted relative to the preceding line.
+    % And a page break here is fine.
+    \vtop to #1\mil{\strut\vfil}%
+    %
+    % TeX does not even consider page breaks if a penalty added to the
+    % main vertical list is 10000 or more.  But in order to see if the
+    % empty box we just added fits on the page, we must make it consider
+    % page breaks.  On the other hand, we don't want to actually break the
+    % page after the empty box.  So we use a penalty of 9999.
+    %
+    % There is an extremely small chance that TeX will actually break the
+    % page at this \penalty, if there are no other feasible breakpoints in
+    % sight.  (If the user is using lots of big @group commands, which
+    % almost-but-not-quite fill up a page, TeX will have a hard time doing
+    % good page breaking, for example.)  However, I could not construct an
+    % example where a page broke at this \penalty; if it happens in a real
+    % document, then we can reconsider our strategy.
+    \penalty9999
+    %
+    % Back up by the size of the box, whether we did a page break or not.
+    \kern -#1\mil
+    %
+    % Do not allow a page break right after this kern.
+    \nobreak
+  \fi
+}
+
+% @br   forces paragraph break (and is undocumented).
+
+\let\br = \par
+
+% @page forces the start of a new page.
+%
+\def\page{\par\vfill\supereject}
+
+% @exdent text....
+% outputs text on separate line in roman font, starting at standard page margin
+
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
+
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+  \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph.  For more general purposes, use the \margin insertion
+% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+  \nobreak
+  \kern-\strutdepth
+  \vtop to \strutdepth{%
+    \baselineskip=\strutdepth
+    \vss
+    % if you have multiple lines of stuff to put here, you'll need to
+    % make the vbox yourself of the appropriate size.
+    \ifx#1l%
+      \llap{\ignorespaces #2\hskip\inmarginspacing}%
+    \else
+      \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+    \fi
+    \null
+  }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+  \setbox0 = \hbox{\ignorespaces #2}%
+  \ifdim\wd0 > 0pt
+    \def\lefttext{#1}%  have both texts
+    \def\righttext{#2}%
+  \else
+    \def\lefttext{#1}%  have only one text
+    \def\righttext{#1}%
+  \fi
+  %
+  \ifodd\pageno
+    \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+  \else
+    \def\temp{\inleftmargin\lefttext}%
+  \fi
+  \temp
+}
+
+% @include FILE -- \input text of FILE.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+  \pushthisfilestack
+  \def\thisfile{#1}%
+  {%
+    \makevalueexpandable  % we want to expand any @value in FILE.
+    \turnoffactive        % and allow special characters in the expansion
+    \indexnofonts         % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @include of #1^^J}%
+    \edef\temp{\noexpand\input #1 }%
+    %
+    % This trickery is to read FILE outside of a group, in case it makes
+    % definitions, etc.
+    \expandafter
+  }\temp
+  \popthisfilestack
+}
+\def\filenamecatcodes{%
+  \catcode`\\=\other
+  \catcode`~=\other
+  \catcode`^=\other
+  \catcode`_=\other
+  \catcode`|=\other
+  \catcode`<=\other
+  \catcode`>=\other
+  \catcode`+=\other
+  \catcode`-=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
+}
+
+\def\pushthisfilestack{%
+  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+  \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+  the stack of filenames is empty.}}
+%
+\def\thisfile{}
+
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+  \ifhmode
+    \let\centersub\centerH
+  \else
+    \let\centersub\centerV
+  \fi
+  \centersub{\hfil \ignorespaces#1\unskip \hfil}%
+  \let\centersub\relax % don't let the definition persist, just in case
+}
+\def\centerH#1{{%
+  \hfil\break
+  \advance\hsize by -\leftskip
+  \advance\hsize by -\rightskip
+  \line{#1}%
+  \break
+}}
+%
+\newcount\centerpenalty
+\def\centerV#1{%
+  % The idea here is the same as in \startdefun, \cartouche, etc.: if
+  % @center is the first thing after a section heading, we need to wipe
+  % out the negative parskip inserted by \sectionheading, but still
+  % prevent a page break here.
+  \centerpenalty = \lastpenalty
+  \ifnum\centerpenalty>10000 \vskip\parskip \fi
+  \ifnum\centerpenalty>9999 \penalty\centerpenalty \fi
+  \line{\kern\leftskip #1\kern\rightskip}%
+}
+
+% @sp n   outputs n lines of vertical space
+%
+\parseargdef\sp{\vskip #1\baselineskip}
+
+% @comment ...line which is ignored...
+% @c is the same as @comment
+% @ignore ... @end ignore  is another way to write a comment
+%
+\def\comment{\begingroup \catcode`\^^M=\active%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other\commentxxx}%
+
+{\catcode`\^^M=\active%
+\gdef\commentxxx#1^^M{\endgroup%
+\futurelet\nexttoken\commentxxxx}%
+\gdef\commentxxxx{\ifx\nexttoken\aftermacro\expandafter\comment\fi}%
+}
+
+\def\c{\begingroup \catcode`\^^M=\active%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\cxxx}
+{\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}}
+% See comment in \scanmacro about why the definitions of @c and @comment differ
+
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \defaultparindent = 0pt
+    \else
+      \defaultparindent = #1em
+    \fi
+  \fi
+  \parindent = \defaultparindent
+}
+
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \lispnarrowing = 0pt
+    \else
+      \lispnarrowing = #1em
+    \fi
+  \fi
+}
+
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading.  If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\noneword
+    \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+  \else\ifx\temp\insertword
+    \let\suppressfirstparagraphindent = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @firstparagraphindent option `\temp'}%
+  \fi\fi
+}
+
+% Here is how we actually suppress indentation.  Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+  \gdef\indent  {\restorefirstparagraphindent \indent}%
+  \gdef\noindent{\restorefirstparagraphindent \noindent}%
+  \global\everypar = {\kern -\parindent \restorefirstparagraphindent}%
+}
+%
+\gdef\restorefirstparagraphindent{%
+  \global\let\indent = \ptexindent
+  \global\let\noindent = \ptexnoindent
+  \global\everypar = {}%
+}
+
+
+% @refill is a no-op.
+\let\refill=\relax
+
+% @setfilename INFO-FILENAME - ignored
+\let\setfilename=\comment
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newbox\boxB
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+%
+% For LuaTeX
+%
+
+\newif\iftxiuseunicodedestname
+\txiuseunicodedestnamefalse % For pdfTeX etc.
+
+\ifx\luatexversion\thisisundefined
+\else
+  % Use Unicode destination names
+  \txiuseunicodedestnametrue
+  % Escape PDF strings with converting UTF-16 from UTF-8
+  \begingroup
+    \catcode`\%=12
+    \directlua{
+      function UTF16oct(str)
+        tex.sprint(string.char(0x5c) .. '376' .. string.char(0x5c) .. '377')
+        for c in string.utfvalues(str) do
+          if c < 0x10000 then
+            tex.sprint(
+              string.format(string.char(0x5c) .. string.char(0x25) .. '03o' ..
+                            string.char(0x5c) .. string.char(0x25) .. '03o',
+                            (c / 256), (c % 256)))
+          else
+            c = c - 0x10000
+            local c_hi = c / 1024 + 0xd800
+            local c_lo = c % 1024 + 0xdc00
+            tex.sprint(
+              string.format(string.char(0x5c) .. string.char(0x25) .. '03o' ..
+                            string.char(0x5c) .. string.char(0x25) .. '03o' ..
+                            string.char(0x5c) .. string.char(0x25) .. '03o' ..
+                            string.char(0x5c) .. string.char(0x25) .. '03o',
+                            (c_hi / 256), (c_hi % 256),
+                            (c_lo / 256), (c_lo % 256)))
+          end
+        end
+      end
+    }
+  \endgroup
+  \def\pdfescapestrutfsixteen#1{\directlua{UTF16oct('\luaescapestring{#1}')}}
+  % Escape PDF strings without converting
+  \begingroup
+    \directlua{
+      function PDFescstr(str)
+        for c in string.bytes(str) do
+          if c <= 0x20 or c >= 0x80 or c == 0x28 or c == 0x29 or c == 0x5c then
+            tex.sprint(
+              string.format(string.char(0x5c) .. string.char(0x25) .. '03o',
+                            c))
+          else
+            tex.sprint(string.char(c))
+          end
+        end
+      end
+    }
+  \endgroup
+  \def\pdfescapestring#1{\directlua{PDFescstr('\luaescapestring{#1}')}}
+  \ifnum\luatexversion>84
+    % For LuaTeX >= 0.85
+    \def\pdfdest{\pdfextension dest}
+    \let\pdfoutput\outputmode
+    \def\pdfliteral{\pdfextension literal}
+    \def\pdfcatalog{\pdfextension catalog}
+    \def\pdftexversion{\numexpr\pdffeedback version\relax}
+    \let\pdfximage\saveimageresource
+    \let\pdfrefximage\useimageresource
+    \let\pdflastximage\lastsavedimageresourceindex
+    \def\pdfendlink{\pdfextension endlink\relax}
+    \def\pdfoutline{\pdfextension outline}
+    \def\pdfstartlink{\pdfextension startlink}
+    \def\pdffontattr{\pdfextension fontattr}
+    \def\pdfobj{\pdfextension obj}
+    \def\pdflastobj{\numexpr\pdffeedback lastobj\relax}
+    \let\pdfpagewidth\pagewidth
+    \let\pdfpageheight\pageheight
+    \edef\pdfhorigin{\pdfvariable horigin}
+    \edef\pdfvorigin{\pdfvariable vorigin}
+  \fi
+\fi
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set).  So we test for \relax and 0 as well as being undefined.
+\ifx\pdfoutput\thisisundefined
+\else
+  \ifx\pdfoutput\relax
+  \else
+    \ifcase\pdfoutput
+    \else
+      \pdftrue
+    \fi
+  \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% 
+% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
+% related messages.  The final outcome is that it is up to the TeX user
+% to double the backslashes and otherwise make the string valid, so
+% that's what we do.  pdftex 1.30.0 (ca.2005) introduced a primitive to
+% do this reliably, so we use it.
+
+% #1 is a control sequence in which to do the replacements,
+% which we \xdef.
+\def\txiescapepdf#1{%
+  \ifx\pdfescapestring\thisisundefined
+    % No primitive available; should we give a warning or log?
+    % Many times it won't matter.
+    \xdef#1{#1}%
+  \else
+    % The expandable \pdfescapestring primitive escapes parentheses,
+    % backslashes, and other special chars.
+    \xdef#1{\pdfescapestring{#1}}%
+  \fi
+}
+\def\txiescapepdfutfsixteen#1{%
+  \ifx\pdfescapestrutfsixteen\thisisundefined
+    % No UTF-16 converting macro available.
+    \txiescapepdf{#1}%
+  \else
+    \xdef#1{\pdfescapestrutfsixteen{#1}}%
+  \fi
+}
+
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found.  (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
+
+\ifpdf
+  %
+  % Color manipulation macros using ideas from pdfcolor.tex,
+  % except using rgb instead of cmyk; the latter is said to render as a
+  % very dark gray on-screen and a very dark halftone in print, instead
+  % of actual black. The dark red here is dark enough to print on paper as
+  % nearly black, but still distinguishable for online viewing.  We use
+  % black by default, though.
+  \def\rgbDarkRed{0.50 0.09 0.12}
+  \def\rgbBlack{0 0 0}
+  %
+  % rg sets the color for filling (usual text, etc.);
+  % RG sets the color for stroking (thin rules, e.g., normal _'s).
+  \def\pdfsetcolor#1{\pdfliteral{#1 rg  #1 RG}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\rgbBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  %
+  \pdfcatalog{/PageMode /UseOutlines}
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+  \def\dopdfimage#1#2#3{%
+    \def\pdfimagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\pdfimageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % pdftex (and the PDF format) support .pdf, .png, .jpg (among
+    % others).  Let's try in that order, PDF first since if
+    % someone has a scalable image, presumably better to use that than a
+    % bitmap.
+    \let\pdfimgext=\empty
+    \begingroup
+      \openin 1 #1.pdf \ifeof 1
+        \openin 1 #1.PDF \ifeof 1
+          \openin 1 #1.png \ifeof 1
+            \openin 1 #1.jpg \ifeof 1
+              \openin 1 #1.jpeg \ifeof 1
+                \openin 1 #1.JPG \ifeof 1
+                  \errhelp = \nopdfimagehelp
+                  \errmessage{Could not find image file #1 for pdf}%
+                \else \gdef\pdfimgext{JPG}%
+                \fi
+              \else \gdef\pdfimgext{jpeg}%
+              \fi
+            \else \gdef\pdfimgext{jpg}%
+            \fi
+          \else \gdef\pdfimgext{png}%
+          \fi
+        \else \gdef\pdfimgext{PDF}%
+        \fi
+      \else \gdef\pdfimgext{pdf}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    % without \immediate, ancient pdftex seg faults when the same image is
+    % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
+    \ifnum\pdftexversion < 14
+      \immediate\pdfimage
+    \else
+      \immediate\pdfximage
+    \fi
+      \ifdim \wd0 >0pt width \pdfimagewidth \fi
+      \ifdim \wd2 >0pt height \pdfimageheight \fi
+      \ifnum\pdftexversion<13
+         #1.\pdfimgext
+       \else
+         {#1.\pdfimgext}%
+       \fi
+    \ifnum\pdftexversion < 14 \else
+      \pdfrefximage \pdflastximage
+    \fi}
+  %
+  \def\setpdfdestname#1{{%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \indexnofonts
+    \makevalueexpandable
+    \turnoffactive
+    \iftxiuseunicodedestname
+      \ifx \declaredencoding \latone
+        % Pass through Latin-1 characters.
+        % LuaTeX with byte wise I/O converts Latin-1 characters to Unicode.
+      \else
+        \ifx \declaredencoding \utfeight
+          % Pass through Unicode characters.
+        \else
+          % Use ASCII approximations in destination names.
+          \passthroughcharsfalse
+        \fi
+      \fi
+    \else
+      % Use ASCII approximations in destination names.
+      \passthroughcharsfalse
+    \fi
+    \def\pdfdestname{#1}%
+    \txiescapepdf\pdfdestname
+  }}
+  %
+  \def\setpdfoutlinetext#1{{%
+    \indexnofonts
+    \makevalueexpandable
+    \turnoffactive
+    \ifx \declaredencoding \latone
+      % The PDF format can use an extended form of Latin-1 in bookmark
+      % strings.  See Appendix D of the PDF Reference, Sixth Edition, for
+      % the "PDFDocEncoding".
+      \passthroughcharstrue
+      % Pass through Latin-1 characters.
+      %   LuaTeX: Convert to Unicode
+      %   pdfTeX: Use Latin-1 as PDFDocEncoding
+      \def\pdfoutlinetext{#1}%
+    \else
+      \ifx \declaredencoding \utfeight
+        \ifx\luatexversion\thisisundefined
+          % For pdfTeX  with UTF-8.
+          % TODO: the PDF format can use UTF-16 in bookmark strings,
+          % but the code for this isn't done yet.
+          % Use ASCII approximations.
+          \passthroughcharsfalse
+          \def\pdfoutlinetext{#1}%
+        \else
+          % For LuaTeX with UTF-8.
+          % Pass through Unicode characters for title texts.
+          \passthroughcharstrue
+          \def\pdfoutlinetext{#1}%
+        \fi
+      \else
+        % For non-Latin-1 or non-UTF-8 encodings.
+        % Use ASCII approximations.
+        \passthroughcharsfalse
+        \def\pdfoutlinetext{#1}%
+      \fi
+    \fi
+    % LuaTeX: Convert to UTF-16
+    % pdfTeX: Use Latin-1 as PDFDocEncoding
+    \txiescapepdfutfsixteen\pdfoutlinetext
+  }}
+  %
+  \def\pdfmkdest#1{%
+    \setpdfdestname{#1}%
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
+  }
+  %
+  % used to mark target names; must be expandable.
+  \def\pdfmkpgn#1{#1}
+  %
+  % by default, use black for everything.
+  \def\urlcolor{\rgbBlack}
+  \def\linkcolor{\rgbBlack}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
+  % Adding outlines to PDF; macros for calculating structure of outlines
+  % come from Petr Olsak
+  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+    \else \csname#1\endcsname \fi}
+  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+    \advance\tempnum by 1
+    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+  %
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
+  %
+  \def\dopdfoutline#1#2#3#4{%
+    % Generate a link to the node text if that exists; else, use the
+    % page number.  We could generate a destination for the section
+    % text in the case where a section has no node, but it doesn't
+    % seem worth the trouble, since most documents are normally structured.
+    \setpdfoutlinetext{#1}
+    \setpdfdestname{#3}
+    \ifx\pdfdestname\empty
+      \def\pdfdestname{#4}%
+    \fi
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfdestname}}#2{\pdfoutlinetext}%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
+      % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
+      \def\numchapentry##1##2##3##4{%
+	\def\thischapnum{##2}%
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsecentry##1##2##3##4{%
+	\advancenumber{chap\thischapnum}%
+	\def\thissecnum{##2}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsubsecentry##1##2##3##4{%
+	\advancenumber{sec\thissecnum}%
+	\def\thissubsecnum{##2}%
+      }%
+      \def\numsubsubsecentry##1##2##3##4{%
+	\advancenumber{subsec\thissubsecnum}%
+      }%
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
+      %
+      % use \def rather than \let here because we redefine \chapentry et
+      % al. a second time, below.
+      \def\appentry{\numchapentry}%
+      \def\appsecentry{\numsecentry}%
+      \def\appsubsecentry{\numsubsecentry}%
+      \def\appsubsubsecentry{\numsubsubsecentry}%
+      \def\unnchapentry{\numchapentry}%
+      \def\unnsecentry{\numsecentry}%
+      \def\unnsubsecentry{\numsubsecentry}%
+      \def\unnsubsubsecentry{\numsubsubsecentry}%
+      \readdatafile{toc}%
+      %
+      % Read toc second time, this time actually producing the outlines.
+      % The `-' means take the \expnumber as the absolute number of
+      % subentries, which we calculated on our first read of the .toc above.
+      %
+      % We use the node names as the destinations.
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{% count is always zero
+        \dopdfoutline{##1}{}{##3}{##4}}%
+      %
+      % PDF outlines are displayed using system fonts, instead of
+      % document fonts.  Therefore we cannot use special characters,
+      % since the encoding is unknown.  For example, the eogonek from
+      % Latin 2 (0xea) gets translated to a | character.  Info from
+      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+      %
+      % TODO this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Too
+      % much work for too little return.  Just use the ASCII equivalents
+      % we use for the index sort strings.
+      % 
+      \indexnofonts
+      \setupdatafile
+      % We can have normal brace characters in the PDF outlines, unlike
+      % Texinfo index files.  So set that up.
+      \def\{{\lbracecharliteral}%
+      \def\}{\rbracecharliteral}%
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
+    \endgroup
+  }
+  {\catcode`[=1 \catcode`]=2
+   \catcode`{=\other \catcode`}=\other
+   \gdef\lbracecharliteral[{]%
+   \gdef\rbracecharliteral[}]%
+  ]
+  %
+  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+    \ifx\PP\D\let\nextsp\relax
+    \else\let\nextsp\skipspaces
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
+    \fi
+    \nextsp}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
+  \ifnum\pdftexversion < 14
+    \let \startlink \pdfannotlink
+  \else
+    \let \startlink \pdfstartlink
+  \fi
+  % make a live url in pdf output.
+  \def\pdfurl#1{%
+    \begingroup
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
+      \makevalueexpandable
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
+      \startlink attr{/Border [0 0 0]}%
+        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+    \endgroup}
+  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+  \def\maketoks{%
+    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \ifx\first0\adn0
+    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+    \else
+      \ifnum0=\countA\else\makelink\fi
+      \ifx\first.\let\next=\done\else
+        \let\next=\maketoks
+        \addtokens{\toksB}{\the\toksD}
+        \ifx\first,\addtokens{\toksB}{\space}\fi
+      \fi
+    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+    \next}
+  \def\makelink{\addtokens{\toksB}%
+    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+  \def\pdflink#1{%
+    \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+    \setcolor{\linkcolor}#1\endlink}
+  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+  % non-pdf mode
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\setcolor = \gobble
+  \let\pdfsetcolor = \gobble
+  \let\pdfmakeoutlines = \relax
+\fi  % \ifx\pdfoutput
+
+%
+% For XeTeX
+%
+\ifx\XeTeXrevision\thisisundefined
+\else
+  %
+  % XeTeX version check
+  %
+  \ifnum\strcmp{\the\XeTeXversion\XeTeXrevision}{0.99996}>-1
+    % TeX Live 2016 contains XeTeX 0.99996 and xdvipdfmx 20160307.
+    % It can use the `dvipdfmx:config' special (from TeX Live SVN r40941).
+    % For avoiding PDF destination name replacement, we use this special
+    % instead of xdvipdfmx's command line option `-C 0x0010'.
+    \special{dvipdfmx:config C 0x0010}
+    % XeTeX 0.99995+ comes with xdvipdfmx 20160307+.
+    % It can handle Unicode destination names for PDF.
+    \txiuseunicodedestnametrue
+  \else
+    % XeTeX < 0.99996 (TeX Live < 2016) cannot use the
+    % `dvipdfmx:config' special.
+    % So for avoiding PDF destination name replacement,
+    % xdvipdfmx's command line option `-C 0x0010' is necessary.
+    %
+    % XeTeX < 0.99995 can not handle Unicode destination names for PDF
+    % because xdvipdfmx 20150315 has a UTF-16 conversion issue.
+    % It is fixed by xdvipdfmx 20160106 (TeX Live SVN r39753).
+    \txiuseunicodedestnamefalse
+  \fi
+  %
+  % Color support
+  %
+  \def\rgbDarkRed{0.50 0.09 0.12}
+  \def\rgbBlack{0 0 0}
+  %
+  \def\pdfsetcolor#1{\special{pdf:scolor [#1]}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\rgbBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  % PDF outline support
+  %
+  % Emulate pdfTeX primitive
+  \def\pdfdest name#1 xyz{%
+    \special{pdf:dest (#1) [@thispage /XYZ @xpos @ypos null]}%
+  }
+  %
+  \def\setpdfdestname#1{{%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \indexnofonts
+    \makevalueexpandable
+    \turnoffactive
+    \iftxiuseunicodedestname
+      % Pass through Unicode characters.
+    \else
+      % Use ASCII approximations in destination names.
+      \passthroughcharsfalse
+    \fi
+    \def\pdfdestname{#1}%
+    \txiescapepdf\pdfdestname
+  }}
+  %
+  \def\setpdfoutlinetext#1{{%
+    \turnoffactive
+    % Always use Unicode characters in title texts.
+    \def\pdfoutlinetext{#1}%
+    % For XeTeX, xdvipdfmx converts to UTF-16.
+    % So we do not convert.
+    \txiescapepdf\pdfoutlinetext
+  }}
+  %
+  \def\pdfmkdest#1{%
+    \setpdfdestname{#1}%
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
+  }
+  %
+  % by default, use black for everything.
+  \def\urlcolor{\rgbBlack}
+  \def\linkcolor{\rgbBlack}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
+  \def\dopdfoutline#1#2#3#4{%
+    \setpdfoutlinetext{#1}
+    \setpdfdestname{#3}
+    \ifx\pdfdestname\empty
+      \def\pdfdestname{#4}%
+    \fi
+    %
+    \special{pdf:out [-] #2 << /Title (\pdfoutlinetext) /A
+      << /S /GoTo /D (\pdfdestname) >> >> }%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
+      %
+      % For XeTeX, counts of subentries are not necessary.
+      % Therefore, we read toc only once.
+      %
+      % We use node names as destinations.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{1}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{2}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{3}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{4}{##3}{##4}}%
+      %
+      \let\appentry\numchapentry%
+      \let\appsecentry\numsecentry%
+      \let\appsubsecentry\numsubsecentry%
+      \let\appsubsubsecentry\numsubsubsecentry%
+      \let\unnchapentry\numchapentry%
+      \let\unnsecentry\numsecentry%
+      \let\unnsubsecentry\numsubsecentry%
+      \let\unnsubsubsecentry\numsubsubsecentry%
+      %
+      % For XeTeX, xdvipdfmx converts strings to UTF-16.
+      % Therefore, the encoding and the language may not be considered.
+      %
+      \indexnofonts
+      \setupdatafile
+      % We can have normal brace characters in the PDF outlines, unlike
+      % Texinfo index files.  So set that up.
+      \def\{{\lbracecharliteral}%
+      \def\}{\rbracecharliteral}%
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
+    \endgroup
+  }
+  {\catcode`[=1 \catcode`]=2
+   \catcode`{=\other \catcode`}=\other
+   \gdef\lbracecharliteral[{]%
+   \gdef\rbracecharliteral[}]%
+  ]
+
+  \special{pdf:docview << /PageMode /UseOutlines >> }
+  % ``\special{pdf:tounicode ...}'' is not necessary
+  % because xdvipdfmx converts strings from UTF-8 to UTF-16 without it.
+  % However, due to a UTF-16 conversion issue of xdvipdfmx 20150315,
+  % ``\special{pdf:dest ...}'' cannot handle non-ASCII strings.
+  % It is fixed by xdvipdfmx 20160106 (TeX Live SVN r39753).
+%
+  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+    \ifx\PP\D\let\nextsp\relax
+    \else\let\nextsp\skipspaces
+      \addtokens{\filename}{\PP}%
+      \advance\filenamelength by 1
+    \fi
+    \nextsp}
+  \def\getfilename#1{%
+    \filenamelength=0
+    % If we don't expand the argument now, \skipspaces will get
+    % snagged on things like "@value{foo}".
+    \edef\temp{#1}%
+    \expandafter\skipspaces\temp|\relax
+  }
+  % make a live url in pdf output.
+  \def\pdfurl#1{%
+    \begingroup
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
+      \makevalueexpandable
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
+      \special{pdf:bann << /Border [0 0 0]
+        /Subtype /Link /A << /S /URI /URI (#1) >> >>}%
+    \endgroup}
+  \def\endlink{\setcolor{\maincolor}\special{pdf:eann}}
+  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+  \def\maketoks{%
+    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \ifx\first0\adn0
+    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+    \else
+      \ifnum0=\countA\else\makelink\fi
+      \ifx\first.\let\next=\done\else
+        \let\next=\maketoks
+        \addtokens{\toksB}{\the\toksD}
+        \ifx\first,\addtokens{\toksB}{\space}\fi
+      \fi
+    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+    \next}
+  \def\makelink{\addtokens{\toksB}%
+    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+  \def\pdflink#1{%
+    \special{pdf:bann << /Border [0 0 0]
+      /Type /Annot /Subtype /Link /A << /S /GoTo /D (#1) >> >>}%
+    \setcolor{\linkcolor}#1\endlink}
+  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+%
+  %
+  % @image support
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+  \def\doxeteximage#1#2#3{%
+    \def\xeteximagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\xeteximageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % XeTeX (and the PDF format) supports .pdf, .png, .jpg (among
+    % others).  Let's try in that order, PDF first since if
+    % someone has a scalable image, presumably better to use that than a
+    % bitmap.
+    \let\xeteximgext=\empty
+    \begingroup
+      \openin 1 #1.pdf \ifeof 1
+        \openin 1 #1.PDF \ifeof 1
+          \openin 1 #1.png \ifeof 1
+            \openin 1 #1.jpg \ifeof 1
+              \openin 1 #1.jpeg \ifeof 1
+                \openin 1 #1.JPG \ifeof 1
+                  \errmessage{Could not find image file #1 for XeTeX}%
+                \else \gdef\xeteximgext{JPG}%
+                \fi
+              \else \gdef\xeteximgext{jpeg}%
+              \fi
+            \else \gdef\xeteximgext{jpg}%
+            \fi
+          \else \gdef\xeteximgext{png}%
+          \fi
+        \else \gdef\xeteximgext{PDF}%
+        \fi
+      \else \gdef\xeteximgext{pdf}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    \def\xetexpdfext{pdf}%
+    \ifx\xeteximgext\xetexpdfext
+      \XeTeXpdffile "#1".\xeteximgext ""
+    \else
+      \def\xetexpdfext{PDF}%
+      \ifx\xeteximgext\xetexpdfext
+        \XeTeXpdffile "#1".\xeteximgext ""
+      \else
+        \XeTeXpicfile "#1".\xeteximgext ""
+      \fi
+    \fi
+    \ifdim \wd0 >0pt width \xeteximagewidth \fi
+    \ifdim \wd2 >0pt height \xeteximageheight \fi \relax
+  }
+\fi
+
+
+%
+\message{fonts,}
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly.  There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+% can get a sort of poor man's double spacing by redefining this.
+\def\baselinefactor{1}
+%
+\newdimen\textleading
+\def\setleading#1{%
+  \dimen0 = #1\relax
+  \normalbaselineskip = \baselinefactor\dimen0
+  \normallineskip = \lineskipfactor\normalbaselineskip
+  \normalbaselines
+  \setbox\strutbox =\hbox{%
+    \vrule width0pt height\strutheightpercent\baselineskip
+                    depth \strutdepthpercent \baselineskip
+  }%
+}
+
+% PDF CMaps.  See also LaTeX's t1.cmap.
+%
+% do nothing with this by default.
+\expandafter\let\csname cmapOT1\endcsname\gobble
+\expandafter\let\csname cmapOT1IT\endcsname\gobble
+\expandafter\let\csname cmapOT1TT\endcsname\gobble
+
+% if we are producing pdf, and we have \pdffontattr, then define cmaps.
+% (\pdffontattr was introduced many years ago, but people still run
+% older pdftex's; it's easy to conditionalize, so we do.)
+\ifpdf \ifx\pdffontattr\thisisundefined \else
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1-0)
+%%Title: (TeX-OT1-0 TeX OT1 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<23> <26> <0023>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+40 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1IT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1IT-0)
+%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1IT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1IT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<25> <26> <0025>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+42 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<23> <0023>
+<24> <00A3>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1TT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1TT-0)
+%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1TT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1TT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+5 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<21> <26> <0021>
+<28> <5F> <0028>
+<61> <7E> <0061>
+endbfrange
+32 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <2191>
+<0C> <2193>
+<0D> <0027>
+<0E> <00A1>
+<0F> <00BF>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<20> <2423>
+<27> <2019>
+<60> <2018>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+\fi\fi
+
+
+% Set the font macro #1 to the font named \fontprefix#2.
+% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
+% encoding (only OT1, OT1IT and OT1TT are allowed, or empty to omit).
+% Example:
+% #1 = \textrm
+% #2 = \rmshape
+% #3 = 10
+% #4 = \mainmagstep
+% #5 = OT1
+%
+\def\setfont#1#2#3#4#5{%
+  \font#1=\fontprefix#2#3 scaled #4
+  \csname cmap#5\endcsname#1%
+}
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+%
+% (end of cmaps)
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\thisisundefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx}               % where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Definitions for a main text size of 11pt.  (The default in Texinfo.)
+%
+\def\definetextfontsizexi{%
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1095}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}{OT1}
+\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defsl\slshape{10}{\magstep1}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
+\def\df{\let\ttfont=\deftt \let\bffont = \defbf
+\let\ttslfont=\defttsl \let\slfont=\defsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
+\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
+\setfont\chapsf\sfbshape{17}{1000}{OT1}
+\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+\def\chapecsize{1728}
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secrmnotbold\rmshape{12}{\magstep1}{OT1}
+\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep2}{OT1}
+\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}{OT1}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+\def\sececsize{1440}
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
+\setfont\ssecit\itbshape{10}{1315}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1315}{OT1}
+\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}{OT1}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+\def\ssececsize{1200}
+
+% Reduced fonts for @acronym in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}{OT1}
+\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{1000}{OT1}
+\setfont\reducedit\itshape{10}{1000}{OT1IT}
+\setfont\reducedsl\slshape{10}{1000}{OT1}
+\setfont\reducedsf\sfshape{10}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{1000}{OT1}
+\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+\def\reducedecsize{1000}
+
+\textleading = 13.2pt % line spacing for 11pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 11pt text font size definitions, \definetextfontsizexi
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit.  This is for the GNU
+% Press printing of the Emacs 22 manual.  Maybe other manuals in the
+% future.  Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1000}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
+\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defsl\slshape{10}{\magstephalf}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
+\def\df{\let\ttfont=\deftt \let\bffont = \defbf
+\let\slfont=\defsl \let\ttslfont=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
+\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+\def\chapecsize{1440}
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}{OT1}
+\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep1}{OT1}
+\setfont\sectt\ttbshape{12}{1000}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
+\setfont\secsf\sfbshape{12}{1000}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}{OT1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+\def\sececsize{1200}
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}{OT1}
+\setfont\ssecit\itbshape{10}{1000}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1000}{OT1}
+\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
+\setfont\ssecsf\sfbshape{10}{1000}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}{OT1}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+\def\ssececsize{1000}
+
+% Reduced fonts for @acronym in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}{OT1}
+\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{900}{OT1}
+\setfont\reducedit\itshape{9}{1000}{OT1IT}
+\setfont\reducedsl\slshape{9}{1000}{OT1}
+\setfont\reducedsf\sfshape{9}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{900}{OT1}
+\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+\def\reducedecsize{0900}
+
+\divide\parskip by 2  % reduce space between paragraphs
+\textleading = 12pt   % line spacing for 10pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 10pt text font size definitions, \definetextfontsizex
+
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+
+% We provide the user-level command
+%   @fonttextsize 10
+% (or 11) to redefine the text font size.  pt is assumed.
+%
+\def\xiword{11}
+\def\xword{10}
+\def\xwordpt{10pt}
+%
+\parseargdef\fonttextsize{%
+  \def\textsizearg{#1}%
+  %\wlog{doing @fonttextsize \textsizearg}%
+  %
+  % Set \globaldefs so that documents can use this inside @tex, since
+  % makeinfo 4.8 does not support it, but we need it nonetheless.
+  %
+ \begingroup \globaldefs=1
+  \ifx\textsizearg\xword \definetextfontsizex
+  \else \ifx\textsizearg\xiword \definetextfontsizexi
+  \else
+    \errhelp=\EMsimple
+    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+  \fi\fi
+ \endgroup
+}
+
+%
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+  \csname #1font\endcsname  % change the current font
+}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families.  We don't
+% bother to reset \scriptfont and \scriptscriptfont; awaiting user need.
+%
+\def\resetmathfonts{%
+  \textfont0=\rmfont \textfont1=\ifont \textfont2=\syfont
+  \textfont\itfam=\itfont \textfont\slfam=\slfont \textfont\bffam=\bffont
+  \textfont\ttfam=\ttfont \textfont\sffam=\sffont
+}
+
+%
+
+% The font-changing commands (all called \...fonts) redefine the meanings
+% of \STYLEfont, instead of just \STYLE.  We do this because \STYLE needs
+% to also set the current \fam for math mode.  Our \STYLE (e.g., \rm)
+% commands hardwire \STYLEfont to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower).  These relative commands are used
+% in, e.g., the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+
+\def\assignfonts#1{%
+  \expandafter\let\expandafter\rmfont\csname #1rm\endcsname
+  \expandafter\let\expandafter\itfont\csname #1it\endcsname
+  \expandafter\let\expandafter\slfont\csname #1sl\endcsname
+  \expandafter\let\expandafter\bffont\csname #1bf\endcsname
+  \expandafter\let\expandafter\ttfont\csname #1tt\endcsname
+  \expandafter\let\expandafter\smallcaps\csname #1sc\endcsname
+  \expandafter\let\expandafter\sffont  \csname #1sf\endcsname
+  \expandafter\let\expandafter\ifont   \csname #1i\endcsname
+  \expandafter\let\expandafter\syfont  \csname #1sy\endcsname
+  \expandafter\let\expandafter\ttslfont\csname #1ttsl\endcsname
+}
+
+\newif\ifrmisbold
+
+% Select smaller font size with the current style.  Used to change font size
+% in, e.g., the LaTeX logo and acronyms.  If we are using bold fonts for
+% normal roman text, also use bold fonts for roman text in the smaller size.
+\def\switchtolllsize{%
+   \expandafter\assignfonts\expandafter{\lllsize}%
+   \ifrmisbold
+     \let\rmfont\bffont
+   \fi
+   \csname\curfontstyle\endcsname
+}%
+
+\def\switchtolsize{%
+   \expandafter\assignfonts\expandafter{\lsize}%
+   \ifrmisbold
+     \let\rmfont\bffont
+   \fi
+   \csname\curfontstyle\endcsname
+}%
+
+\def\definefontsetatsize#1#2#3#4#5{%
+\expandafter\def\csname #1fonts\endcsname{%
+  \def\curfontsize{#1}%
+  \def\lsize{#2}\def\lllsize{#3}%
+  \csname rmisbold#5\endcsname
+  \assignfonts{#1}%
+  \resetmathfonts
+  \setleading{#4}%
+}}
+
+\definefontsetatsize{text}   {reduced}{smaller}{\textleading}{false}
+\definefontsetatsize{title}  {chap}   {subsec} {27pt}  {true}
+\definefontsetatsize{chap}   {sec}    {text}   {19pt}  {true}
+\definefontsetatsize{sec}    {subsec} {reduced}{17pt}  {true}
+\definefontsetatsize{ssec}   {text}   {small}  {15pt}  {true}
+\definefontsetatsize{reduced}{small}  {smaller}{10.5pt}{false}
+\definefontsetatsize{small}  {smaller}{smaller}{10.5pt}{false}
+\definefontsetatsize{smaller}{smaller}{smaller}{9.5pt} {false}
+
+\def\titlefont#1{{\titlefonts\rm #1}}
+\let\subsecfonts = \ssecfonts
+\let\subsubsecfonts = \ssecfonts
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+%   8.5x11=86   smallbook=72  a4=90  a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+%   8.5x11=90+  smallbook=80  a4=90+  a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt.  So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+%   8.5x11=71  smallbook=60  a4=75  a5=58
+% --karl, 24jan03.
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\definetextfontsizexi
+
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+  \csname markup#1true\endcsname
+  \def\currentmarkupstyle{#1}%
+  \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+  \expandafter\def\expandafter\markupstylesetup
+    \expandafter{\markupstylesetup #1}%
+  \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuplq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuprq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+%
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+%
+\let\markupsetuplqkbd     \markupsetcodequoteleft
+\let\markupsetuprqkbd     \markupsetcodequoteright
+%
+\let\markupsetuplqsamp \markupsetcodequoteleft
+\let\markupsetuprqsamp \markupsetcodequoteright
+%
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+%
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+% Allow an option to not use regular directed right quote/apostrophe
+% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
+% The undirected quote is ugly, so don't make it the default, but it
+% works for pasting with more pdf viewers (at least evince), the
+% lilypond developers report.  xpdf does work with the regular 0x27.
+%
+\def\codequoteright{%
+  \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+    \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+      '%
+    \else \char'15 \fi
+  \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+  \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+    \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+      % [Knuth] pp. 380,381,391
+      % \relax disables Spanish ligatures ?` and !` of \tt font.
+      \relax`%
+    \else \char'22 \fi
+  \else \char'22 \fi
+}
+
+% Commands to set the quote options.
+% 
+\parseargdef\codequoteundirected{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
+  \fi\fi
+}
+%
+\parseargdef\codequotebacktick{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
+  \fi\fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
+
+% Count depth in font-changes, for error checks
+\newcount\fontdepth \fontdepth=0
+
+% Font commands.
+
+% #1 is the font command (\sl or \it), #2 is the text to slant.
+% If we are in a monospaced environment, however, 1) always use \ttsl,
+% and 2) do not add an italic correction.
+\def\dosmartslant#1#2{%
+  \ifusingtt 
+    {{\ttsl #2}\let\next=\relax}%
+    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
+  \next
+}
+\def\smartslanted{\dosmartslant\sl}
+\def\smartitalic{\dosmartslant\it}
+
+% Output an italic correction unless \next (presumed to be the following
+% character) is such as not to need one.
+\def\smartitaliccorrection{%
+  \ifx\next,%
+  \else\ifx\next-%
+  \else\ifx\next.%
+  \else\ifx\next\.%
+  \else\ifx\next\comma%
+  \else\ptexslash
+  \fi\fi\fi\fi\fi
+  \aftersmartic
+}
+
+% Unconditional use \ttsl, and no ic.  @var is set to this for defuns.
+\def\ttslanted#1{{\ttsl #1}}
+
+% @cite is like \smartslanted except unconditionally use \sl.  We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+
+\def\aftersmartic{}
+\def\var#1{%
+  \let\saveaftersmartic = \aftersmartic
+  \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}%
+  \smartslanted{#1}%
+}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @b, explicit bold.  Also @strong.
+\def\b#1{{\bf #1}}
+\let\strong=\b
+
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph.  Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+  \def\plainfrenchspacing{%
+    \sfcode`\.=\@m \sfcode`\?=\@m \sfcode`\!=\@m
+    \sfcode`\:=\@m \sfcode`\;=\@m \sfcode`\,=\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
+  }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+% @t, explicit typewriter.
+\def\t#1{%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
+  \null
+}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% @indicateurl is \samp, that is, with quotes.
+\let\indicateurl=\samp
+
+% @code (and similar) prints in typewriter, but with spaces the same
+% size as normal in the surrounding text, without hyphenation, etc.
+% This is a subroutine for that.
+\def\tclose#1{%
+  {%
+    % Change normal interword space to be same as for the current font.
+    \spaceskip = \fontdimen2\font
+    %
+    % Switch to typewriter.
+    \tt
+    %
+    % But `\ ' produces the large typewriter interword space.
+    \def\ {{\spaceskip = 0pt{} }}%
+    %
+    % Turn off hyphenation.
+    \nohyphenation
+    %
+    \rawbackslash
+    \plainfrenchspacing
+    #1%
+  }%
+  \null % reset spacefactor to 1000
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% (But see \codedashfinish below.)
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+%
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash. -- rms.
+{
+  \catcode`\-=\active \catcode`\_=\active
+  \catcode`\'=\active \catcode`\`=\active
+  \global\let'=\rq \global\let`=\lq  % default definitions
+  %
+  \global\def\code{\begingroup
+    \setupmarkupstyle{code}%
+    % The following should really be moved into \setupmarkupstyle handlers.
+    \catcode\dashChar=\active  \catcode\underChar=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\normaldash
+     \let_\realunder
+    \fi
+    % Given -foo (with a single dash), we do not want to allow a break
+    % after the hyphen.
+    \global\let\codedashprev=\codedash
+    %
+    \codex
+  }
+  %
+  \gdef\codedash{\futurelet\next\codedashfinish}
+  \gdef\codedashfinish{%
+    \normaldash % always output the dash character itself.
+    % 
+    % Now, output a discretionary to allow a line break, unless
+    % (a) the next character is a -, or
+    % (b) the preceding character is a -.
+    % E.g., given --posix, we do not want to allow a break after either -.
+    % Given --foo-bar, we do want to allow a break between the - and the b.
+    \ifx\next\codedash \else
+      \ifx\codedashprev\codedash 
+      \else \discretionary{}{}{}\fi
+    \fi
+    % we need the space after the = for the case when \next itself is a
+    % space token; it would get swallowed otherwise.  As in @code{- a}.
+    \global\let\codedashprev= \next
+  }
+}
+\def\normaldash{-}
+%
+\def\codex #1{\tclose{#1}\endgroup}
+
+\def\codeunder{%
+  % this is all so @math{@code{var_name}+1} can work.  In math mode, _
+  % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+  % will therefore expand the active definition of _, which is us
+  % (inside @code that is), therefore an endless loop.
+  \ifusingtt{\ifmmode
+               \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+             \else\normalunderscore \fi
+             \discretionary{}{}{}}%
+            {\_}%
+}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is bad.
+% @allowcodebreaks provides a document-level way to turn breaking at -
+% and _ on and off.
+%
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
+  \fi\fi
+}
+
+% For @command, @env, @file, @option quotes seem unnecessary,
+% so use \code rather than \samp.
+\let\command=\code
+\let\env=\code
+\let\file=\code
+\let\option=\code
+
+% @uref (abbreviation for `urlref') aka @url takes an optional
+% (comma-separated) second argument specifying the text to display and
+% an optional third arg as text to display instead of (rather than in
+% addition to) the url itself.  First (mandatory) arg is the url.
+
+% TeX-only option to allow changing PDF output to show only the second
+% arg (if given), and not the url (which is then just the link target).
+\newif\ifurefurlonlylink
+
+% The main macro is \urefbreak, which allows breaking at expected
+% places within the url.  (There used to be another version, which
+% didn't support automatic breaking.)
+\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
+\let\uref=\urefbreak
+%
+\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
+\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}% look for second arg
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        % For pdfTeX and LuaTeX
+        \ifurefurlonlylink
+          % PDF plus option to not display url, show just arg
+          \unhbox0             
+        \else
+          % PDF, normally display both arg and url for consistency,
+          % visibility, if the pdf is eventually used to print, etc.
+          \unhbox0\ (\urefcode{#1})%
+        \fi
+      \else
+        \ifx\XeTeXrevision\thisisundefined
+          \unhbox0\ (\urefcode{#1})% DVI, always show arg and url
+        \else
+          % For XeTeX
+          \ifurefurlonlylink
+            % PDF plus option to not display url, show just arg
+            \unhbox0             
+          \else
+            % PDF, normally display both arg and url for consistency,
+            % visibility, if the pdf is eventually used to print, etc.
+            \unhbox0\ (\urefcode{#1})%
+          \fi
+        \fi
+      \fi
+    \else
+      \urefcode{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% Allow line breaks around only a few characters (only).
+\def\urefcatcodes{%
+  \catcode`\&=\active \catcode`\.=\active
+  \catcode`\#=\active \catcode`\?=\active
+  \catcode`\/=\active
+}
+{
+  \urefcatcodes
+  %
+  \global\def\urefcode{\begingroup
+    \setupmarkupstyle{code}%
+    \urefcatcodes
+    \let&\urefcodeamp
+    \let.\urefcodedot
+    \let#\urefcodehash
+    \let?\urefcodequest
+    \let/\urefcodeslash
+    \codex
+  }
+  %
+  % By default, they are just regular characters.
+  \global\def&{\normalamp}
+  \global\def.{\normaldot}
+  \global\def#{\normalhash}
+  \global\def?{\normalquest}
+  \global\def/{\normalslash}
+}
+
+% we put a little stretch before and after the breakable chars, to help
+% line breaking of long url's.  The unequal skips make look better in
+% cmtt at least, especially for dots.
+\def\urefprestretchamount{.13em}
+\def\urefpoststretchamount{.1em}
+\def\urefprestretch{\urefprebreak \hskip0pt plus\urefprestretchamount\relax}
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus\urefprestretchamount\relax}
+%
+\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
+\def\urefcodedot{\urefprestretch .\urefpoststretch}
+\def\urefcodehash{\urefprestretch \#\urefpoststretch}
+\def\urefcodequest{\urefprestretch ?\urefpoststretch}
+\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
+{
+  \catcode`\/=\active
+  \global\def\urefcodeslashfinish{%
+    \urefprestretch \slashChar
+    % Allow line break only after the final / in a sequence of
+    % slashes, to avoid line break between the slashes in http://.
+    \ifx\next/\else \urefpoststretch \fi
+  }
+}
+
+% One more complication: by default we'll break after the special
+% characters, but some people like to break before the special chars, so
+% allow that.  Also allow no breaking at all, for manual control.
+% 
+\parseargdef\urefbreakstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\wordnone
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordbefore
+    \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordafter
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\wordafter{after}
+\def\wordbefore{before}
+\def\wordnone{none}
+
+\urefbreakstyle after
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+  \def\email#1{\doemail#1,,\finish}
+  \def\doemail#1,#2,#3\finish{\begingroup
+    \unsepspaces
+    \pdfurl{mailto:#1}%
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+    \endlink
+  \endgroup}
+\else
+  \ifx\XeTeXrevision\thisisundefined
+    \let\email=\uref
+  \else
+    \def\email#1{\doemail#1,,\finish}
+    \def\doemail#1,#2,#3\finish{\begingroup
+      \unsepspaces
+      \pdfurl{mailto:#1}%
+      \setbox0 = \hbox{\ignorespaces #2}%
+      \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+      \endlink
+    \endgroup}
+  \fi
+\fi
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct'.
+\kbdinputstyle distinct
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\def\look{#1}\expandafter\kbdsub\look??\par}}
+
+\def\xkey{\key}
+\def\kbdsub#1#2#3\par{%
+  \def\one{#1}\def\three{#3}\def\threex{??}%
+  \ifx\one\xkey\ifx\threex\three \key{#2}%
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+  \else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
+
+% Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+  {\switchtolsize #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+  {\plainfrenchspacing #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+  \null % reset \spacefactor=1000
+}
+
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode`\_ = \active
+  \gdef\mathunderscore{%
+    \catcode`\_=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a math (or tt) \.
+% FYI, plain.tex uses \\ as a temporary control sequence (for no
+% particular reason), but this is not advertised and we don't care.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \ifmmode\else % only go into math if not in math mode already
+    \tex
+    \mathunderscore
+    \let\\ = \mathbackslash
+    \mathactive
+    % make the texinfo accent commands work in math mode
+    \let\"=\ddot
+    \let\'=\acute
+    \let\==\bar
+    \let\^=\hat
+    \let\`=\grave
+    \let\u=\breve
+    \let\v=\check
+    \let\~=\tilde
+    \let\dotaccent=\dot
+    % have to provide another name for sup operator
+    \let\mathopsup=\sup
+  $\expandafter\finishmath\fi
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \catcode`' = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+    \let' = \ptexquoteright
+  }
+}
+
+% for @sub and @sup, if in math mode, just do a normal sub/superscript.
+% If in text, use math to place as sub/superscript, but switch
+% into text mode, with smaller fonts.  This is a different font than the
+% one used for real math sub/superscripts (8pt vs. 7pt), but let's not
+% fix it (significant additions to font machinery) until someone notices.
+%
+\def\sub{\ifmmode \expandafter\sb \else \expandafter\finishsub\fi}
+\def\finishsub#1{$\sb{\hbox{\switchtolllsize #1}}$}%
+%
+\def\sup{\ifmmode \expandafter\ptexsp \else \expandafter\finishsup\fi}
+\def\finishsup#1{$\ptexsp{\hbox{\switchtolllsize #1}}$}%
+
+% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
+% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
+% except specified as a normal braced arg, so no newlines to worry about.
+% 
+\def\outfmtnametex{tex}
+%
+\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
+\long\def\doinlinefmt#1,#2,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
+}
+% 
+% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
+% FMTNAME is tex, else ELSE-TEXT.
+\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
+\long\def\doinlinefmtifelse#1,#2,#3,#4,\finish{%
+  \def\inlinefmtname{#1}%
+  \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\else \ignorespaces #3\fi
+}
+%
+% For raw, must switch into @tex before parsing the argument, to avoid
+% setting catcodes prematurely.  Doing it this way means that, for
+% example, @inlineraw{html, foo{bar} gets a parse error instead of being
+% ignored.  But this isn't important because if people want a literal
+% *right* brace they would have to use a command anyway, so they may as
+% well use a command to get a left brace too.  We could re-use the
+% delimiter character idea from \verb, but it seems like overkill.
+% 
+\long\def\inlineraw{\tex \doinlineraw}
+\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
+\def\doinlinerawtwo#1,#2,\finish{%
+  \def\inlinerawname{#1}%
+  \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi
+  \endgroup % close group opened by \tex.
+}
+
+% @inlineifset{VAR, TEXT} expands TEXT if VAR is @set.
+%
+\long\def\inlineifset#1{\doinlineifset #1,\finish}
+\long\def\doinlineifset#1,#2,\finish{%
+  \def\inlinevarname{#1}%
+  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax
+  \else\ignorespaces#2\fi
+}
+
+% @inlineifclear{VAR, TEXT} expands TEXT if VAR is not @set.
+%
+\long\def\inlineifclear#1{\doinlineifclear #1,\finish}
+\long\def\doinlineifclear#1,#2,\finish{%
+  \def\inlinevarname{#1}%
+  \expandafter\ifx\csname SET\inlinevarname\endcsname\relax \ignorespaces#2\fi
+}
+
+
+\message{glyphs,}
+% and logos.
+
+% @@ prints an @, as does @atchar{}.
+\def\@{\char64 }
+\let\atchar=\@
+
+% @{ @} @lbracechar{} @rbracechar{} all generate brace characters.
+\def\lbracechar{{\ifmonospace\char123\else\ensuremath\lbrace\fi}}
+\def\rbracechar{{\ifmonospace\char125\else\ensuremath\rbrace\fi}}
+\let\{=\lbracechar
+\let\}=\rbracechar
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \ptexc
+\let\dotaccent = \ptexdot
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \ptext
+\let\ubaraccent = \ptexb
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\switchtolllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\switchtolllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{%
+     \ifx\textnominalsize\xwordpt
+       % for 10pt running text, lllsize (8pt) is too small for the A in LaTeX.
+       % Revert to plain's \scriptsize, which is 7pt.
+       \count255=\the\fam $\fam\count255 \scriptstyle A$%
+     \else
+       % For 11pt, we can use our lllsize.
+       \switchtolllsize A%
+     \fi
+     }%
+     \vss
+  }}%
+  \kern-.15em
+  \TeX
+}
+
+% Some math mode symbols.  Define \ensuremath to switch into math mode
+% unless we are already there.  Expansion tricks may not be needed here,
+% but safer, and can't hurt.
+\def\ensuremath{\ifmmode \expandafter\asis \else\expandafter\ensuredmath \fi}
+\def\ensuredmath#1{$\relax#1$}
+%
+\def\bullet{\ensuremath\ptexbullet}
+\def\geq{\ensuremath\ge}
+\def\leq{\ensuremath\le}
+\def\minus{\ensuremath-}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
+%
+\def\dots{%
+  \leavevmode
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\ttfont \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  %
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  %
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  %
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
+% Glyphs from the EC fonts.  We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
+\def\guillemetleft{{\ecfont \char"13}}
+\def\guillemotleft{\guillemetleft}
+\def\guillemetright{{\ecfont \char"14}}
+\def\guillemotright{\guillemetright}
+\def\guilsinglleft{{\ecfont \char"0E}}
+\def\guilsinglright{{\ecfont \char"0F}}
+\def\quotedblbase{{\ecfont \char"12}}
+\def\quotesinglbase{{\ecfont \char"0D}}
+%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases.  We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+  \def\temp{#1}%
+  \ifx\temp\macrocharA\Aogonek
+  \else\ifx\temp\macrochara\aogonek
+  \else\ifx\temp\macrocharE\Eogonek
+  \else\ifx\temp\macrochare\eogonek
+  \else
+    \ecfont \setbox0=\hbox{#1}%
+    \ifdim\ht0=1ex\accent"0C #1%
+    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+    \fi
+  \fi\fi\fi\fi
+  }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
+% Use the European Computer Modern fonts (cm-super in outline format)
+% for non-CM glyphs.  That is ec* for regular text and tc* for the text
+% companion symbols (LaTeX TS1 encoding).  Both are part of the ec
+% package and follow the same conventions.
+% 
+\def\ecfont{\etcfont{e}}
+\def\tcfont{\etcfont{t}}
+%
+\def\etcfont#1{%
+  % We can't distinguish serif/sans and italic/slanted, but this
+  % is used for crude hacks anyway (like adding French and German
+  % quotes to documents typeset with CM, where we lose kerning), so
+  % hopefully nobody will notice/care.
+  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
+  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
+  \ifmonospace
+    % typewriter:
+    \font\thisecfont = #1ctt\ecsize \space at \nominalsize
+  \else
+    \ifx\curfontstyle\bfstylename
+      % bold:
+      \font\thisecfont = #1cb\ifusingit{i}{x}\ecsize \space at \nominalsize
+    \else
+      % regular:
+      \font\thisecfont = #1c\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+    \fi
+  \fi
+  \thisecfont
+}
+
+% @registeredsymbol - R in a circle.  The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{\switchtolllsize R}%
+               \hfil\crcr\Orb}}%
+    }$%
+}
+
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
+% Laurent Siebenmann reports \Orb undefined with:
+%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\thisisundefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+% Quotes.
+\chardef\quotedblleft="5C
+\chardef\quotedblright=`\"
+\chardef\quoteleft=`\`
+\chardef\quoteright=`\'
+
+
+\message{page headings,}
+
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page.  Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% @setcontentsaftertitlepage used to do an implicit @contents or
+% @shortcontents after @end titlepage, but it is now obsolete.
+\def\setcontentsaftertitlepage{%
+  \errmessage{@setcontentsaftertitlepage has been removed as a Texinfo
+              command; move your @contents command if you want the contents
+              after the title page.}}%
+\def\setshortcontentsaftertitlepage{%
+  \errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
+              command; move your @shortcontents and @contents commands if you 
+              want the contents after the title page.}}%
+
+\parseargdef\shorttitlepage{%
+  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+  \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+  % Open one extra group, as we want to close it in the middle of \Etitlepage.
+  \begingroup
+    \parindent=0pt \textfonts
+    % Leave some space at the very top of the page.
+    \vglue\titlepagetopglue
+    % No rule at page bottom unless we print one at the top with @title.
+    \finishedtitlepagetrue
+    %
+    % Most title ``pages'' are actually two pages long, with space
+    % at the top of the second.  We don't want the ragged left on the second.
+    \let\oldpage = \page
+    \def\page{%
+      \iffinishedtitlepage\else
+	 \finishtitlepage
+      \fi
+      \let\page = \oldpage
+      \page
+      \null
+    }%
+}
+
+\def\Etitlepage{%
+    \iffinishedtitlepage\else
+	\finishtitlepage
+    \fi
+    % It is important to do the page break before ending the group,
+    % because the headline and footline are only empty inside the group.
+    % If we use the new definition of \page, we always get a blank page
+    % after the title page, which we certainly don't want.
+    \oldpage
+  \endgroup
+  %
+  % Need this before the \...aftertitlepage checks so that if they are
+  % in effect the toc pages will come out with page numbers.
+  \HEADINGSon
+}
+
+\def\finishtitlepage{%
+  \vskip4pt \hrule height 2pt width \hsize
+  \vskip\titlepagebottomglue
+  \finishedtitlepagetrue
+}
+
+% Settings used for typesetting titles: no hyphenation, no indentation,
+% don't worry much about spacing, ragged right.  This should be used
+% inside a \vbox, and fonts need to be set appropriately first. \par should
+% be specified before the end of the \vbox, since a vbox is a group.
+% 
+\def\raggedtitlesettings{%
+  \rm
+  \hyphenpenalty=10000
+  \parindent=0pt
+  \tolerance=5000
+  \ptexraggedright
+}
+
+% Macros to be used within @titlepage:
+
+\let\subtitlerm=\rmfont
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\parseargdef\title{%
+  \checkenv\titlepage
+  \vbox{\titlefonts \raggedtitlesettings #1\par}%
+  % print a rule at the page bottom also.
+  \finishedtitlepagefalse
+  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+  \checkenv\titlepage
+  {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+  \def\temp{\quotation}%
+  \ifx\thisenv\temp
+    \def\quotationauthor{#1}% printed in \Equotation.
+  \else
+    \checkenv\titlepage
+    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+    {\secfonts\rm \leftline{#1}}%
+  \fi
+}
+
+
+% Set up page headings and footings.
+
+\let\thispage=\folio
+
+\newtoks\evenheadline    % headline on even pages
+\newtoks\oddheadline     % headline on odd pages
+\newtoks\evenfootline    % footline on even pages
+\newtoks\oddfootline     % footline on odd pages
+
+% Now make \makeheadline and \makefootline in Plain TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+                            \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+                            \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
+
+% Commands to set those variables.
+% For example, this is what  @headings on  does
+% @evenheading @thistitle|@thispage|@thischapter
+% @oddheading @thischapter|@thispage|@thistitle
+% @evenfooting @thisfile||
+% @oddfooting ||@thisfile
+
+
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+  %
+  % Leave some space for the footline.  Hopefully ok to assume
+  % @evenfooting will not be used by itself.
+  \global\advance\txipageheight by -12pt
+  \global\advance\vsize by -12pt
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
+% @evenheadingmarks top     \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+% These define \getoddheadingmarks, \getevenheadingmarks,
+% \getoddfootingmarks, and \getevenfootingmarks, each to one of
+% \gettopheadingmarks, \getbottomheadingmarks.
+%
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\parseargdef\everyheadingmarks{\headingmarks{even}{heading}{#1}
+                          \headingmarks{odd}{heading}{#1} }
+\parseargdef\everyfootingmarks{\headingmarks{even}{footing}{#1}
+                          \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+  \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
+
+% @headings double      turns headings on for double-sided printing.
+% @headings single      turns headings on for single-sided printing.
+% @headings off         turns them off.
+% @headings on          same as @headings double, retained for compatibility.
+% @headings after       turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
+
+\parseargdef\headings{\csname HEADINGS#1\endcsname}
+
+\def\headingsoff{% non-global headings elimination
+  \evenheadline={\hfil}\evenfootline={\hfil}%
+   \oddheadline={\hfil}\oddfootline={\hfil}%
+}
+
+\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
+\HEADINGSoff  % it's the default
+
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
+% title on inside top of left hand pages, and page numbers on outside top
+% edge of all pages.
+\def\HEADINGSdouble{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapterheading\hfil\folio}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapterheading\hfil\folio}}
+\global\oddheadline={\line{\thischapterheading\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+
+% Subroutines used in generating headings
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\thisisundefined
+\def\today{%
+  \number\day\space
+  \ifcase\month
+  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+  \fi
+  \space\number\year}
+\fi
+
+% @settitle line...  specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
+
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
+
+% default indentation of table text
+\newdimen\tableindent \tableindent=.8in
+% default indentation of @itemize and @enumerate text
+\newdimen\itemindent  \itemindent=.3in
+% margin between end of table item and start of table text.
+\newdimen\itemmargin  \itemmargin=.1in
+
+% used internally for \itemindent minus \itemmargin
+\newdimen\itemmax
+
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+  \advance\hsize by -\rightskip
+  \advance\hsize by -\tableindent
+  \setbox0=\hbox{\itemindicate{#1}}%
+  \itemindex{#1}%
+  \nobreak % This prevents a break before @itemx.
+  %
+  % If the item text does not fit in the space we have, put it on a line
+  % by itself, and do not allow a page break either before or after that
+  % line.  We do not start a paragraph here because then if the next
+  % command is, e.g., @kindex, the whatsit would get put into the
+  % horizontal list on a line by itself, resulting in extra blank space.
+  \ifdim \wd0>\itemmax
+    %
+    % Make this a paragraph so we get the \parskip glue and wrapping,
+    % but leave it ragged-right.
+    \begingroup
+      \advance\leftskip by-\tableindent
+      \advance\hsize by\tableindent
+      \advance\rightskip by0pt plus1fil\relax
+      \leavevmode\unhbox0\par
+    \endgroup
+    %
+    % We're going to be starting a paragraph, but we don't want the
+    % \parskip glue -- logically it's part of the @item we just started.
+    \nobreak \vskip-\parskip
+    %
+    % Stop a page break at the \parskip glue coming up.  However, if
+    % what follows is an environment such as @example, there will be no
+    % \parskip glue; then the negative vskip we just inserted would
+    % cause the example and the item to crash together.  So we use this
+    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+    % \parskip glue after all.  Section titles are handled this way also.
+    %
+    \penalty 10001
+    \endgroup
+    \itemxneedsnegativevskipfalse
+  \else
+    % The item text fits into the space.  Start a paragraph, so that the
+    % following text (if any) will end up on the same line.
+    \noindent
+    % Do this with kerns and \unhbox so that if there is a footnote in
+    % the item text, it can migrate to the main vertical list and
+    % eventually be printed.
+    \nobreak\kern-\tableindent
+    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+    \unhbox0
+    \nobreak\kern\dimen0
+    \endgroup
+    \itemxneedsnegativevskiptrue
+  \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+  \let\itemindex\gobble
+  \tablecheck{table}%
+}
+\envdef\ftable{%
+  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+  \tablecheck{ftable}%
+}
+\envdef\vtable{%
+  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
+}
+\def\tablex#1{%
+  \def\itemindicate{#1}%
+  \parsearg\tabley
+}
+\def\tabley#1{%
+  {%
+    \makevalueexpandable
+    \edef\temp{\noexpand\tablez #1\space\space\space}%
+    \expandafter
+  }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+  \aboveenvbreak
+  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+  \ifnum 0#2>0 \tableindent=#2\mil \fi
+  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+  \itemmax=\tableindent
+  \advance \itemmax by -\itemmargin
+  \advance \leftskip by \tableindent
+  \exdentamount=\tableindent
+  \parindent = 0pt
+  \parskip = \smallskipamount
+  \ifdim \parskip=0pt \parskip=2pt \fi
+  \let\item = \internalBitem
+  \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+  \aboveenvbreak
+  \itemmax=\itemindent
+  \advance\itemmax by -\itemmargin
+  \advance\leftskip by \itemindent
+  \exdentamount=\itemindent
+  \parindent=0pt
+  \parskip=\smallskipamount
+  \ifdim\parskip=0pt \parskip=2pt \fi
+  %
+  % Try typesetting the item mark so that if the document erroneously says
+  % something like @itemize @samp (intending @table), there's an error
+  % right away at the @itemize.  It's not the best error message in the
+  % world, but it's better than leaving it to the @item.  This means if
+  % the user wants an empty mark, they have to say @w{} not just @w.
+  \def\itemcontents{#1}%
+  \setbox0 = \hbox{\itemcontents}%
+  %
+  % @itemize with no arg is equivalent to @itemize @bullet.
+  \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  %
+  \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+  \advance\itemno by 1  % for enumerations
+  {\let\par=\endgraf \smallbreak}% reasonable place to break
+  {%
+   % If the document has an @itemize directly after a section title, a
+   % \nobreak will be last on the list, and \sectionheading will have
+   % done a \vskip-\parskip.  In that case, we don't want to zero
+   % parskip, or the item text will crash with the heading.  On the
+   % other hand, when there is normal text preceding the item (as there
+   % usually is), we do want to zero parskip, or there would be too much
+   % space.  In that case, we won't have a \nobreak before.  At least
+   % that's the theory.
+   \ifnum\lastpenalty<10000 \parskip=0in \fi
+   \noindent
+   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   %
+   \ifinner\else
+     \vadjust{\penalty 1200}% not good to break after first line of item.
+   \fi
+   % We can be in inner vertical mode in a footnote, although an
+   % @itemize looks awful there.
+  }%
+  \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list.  No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+  % If we were given no argument, pretend we were given `1'.
+  \def\thearg{#1}%
+  \ifx\thearg\empty \def\thearg{1}\fi
+  %
+  % Detect if the argument is a single token.  If so, it might be a
+  % letter.  Otherwise, the only valid thing it can be is a number.
+  % (We will always have one token, because of the test we just made.
+  % This is a good thing, since \splitoff doesn't work given nothing at
+  % all -- the first parameter is undelimited.)
+  \expandafter\splitoff\thearg\endmark
+  \ifx\rest\empty
+    % Only one token in the argument.  It could still be anything.
+    % A ``lowercase letter'' is one whose \lccode is nonzero.
+    % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+    %   not equal to itself.
+    % Otherwise, we assume it's a number.
+    %
+    % We need the \relax at the end of the \ifnum lines to stop TeX from
+    % continuing to look for a <number>.
+    %
+    \ifnum\lccode\expandafter`\thearg=0\relax
+      \numericenumerate % a number (we hope)
+    \else
+      % It's a letter.
+      \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+        \lowercaseenumerate % lowercase letter
+      \else
+        \uppercaseenumerate % uppercase letter
+      \fi
+    \fi
+  \else
+    % Multiple tokens in the argument.  We hope it's a number.
+    \numericenumerate
+  \fi
+}
+
+% An @enumerate whose labels are integers.  The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+  \itemno = \thearg
+  \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more lowercase letters in @enumerate; get a bigger
+                  alphabet}%
+    \fi
+    \char\lccode\itemno
+  }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more uppercase letters in @enumerate; get a bigger
+                  alphabet}
+    \fi
+    \char\uccode\itemno
+  }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments.  Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+  \advance\itemno by -1
+  \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble.  Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+%   @multitable @columnfractions .25 .3 .45
+%   @item ...
+%
+%   Numbers following @columnfractions are the percent of the total
+%   current hsize to be used for each column. You may use as many
+%   columns as desired.
+
+
+% Or use a template:
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item ...
+%   using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item first col stuff @tab second col stuff @tab third col
+%   @item
+%   first col stuff
+%   @tab
+%   second col stuff
+%   @tab
+%   third col
+%   @item first col stuff @tab second col stuff
+%   @tab Many paragraphs of text may be used in any column.
+%
+%         They will wrap at the width determined by the template.
+%   @item@tab@tab This will be in third column.
+%   @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+%                                                            to baseline.
+%   0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1.  We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+  \global\advance\colcount by 1
+  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+  \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+  \def\firstarg{#1}%
+  \ifx\firstarg\xendsetuptable
+    \let\go = \relax
+  \else
+    \ifx\firstarg\xcolumnfractions
+      \global\setpercenttrue
+    \else
+      \ifsetpercent
+         \let\go\pickupwholefraction
+      \else
+         \global\advance\colcount by 1
+         \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+                   % separator; typically that is always in the input, anyway.
+         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+      \fi
+    \fi
+    \ifx\go\pickupwholefraction
+      % Put the argument back for the \pickupwholefraction call, so
+      % we'll always have a period there to be parsed.
+      \def\go{\pickupwholefraction#1}%
+    \else
+      \let\go = \setuptable
+    \fi%
+  \fi
+  \go
+}
+
+% multitable-only commands.
+% 
+% @headitem starts a heading row, which we typeset in bold.  Assignments
+% have to be global since we are inside the implicit group of an
+% alignment entry.  \everycr below resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+  \checkenv\multitable
+  \crcr
+  \gdef\headitemcrhook{\nobreak}% attempt to avoid page break after headings
+  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+  \the\everytab % for the first item
+}%
+%
+% default for tables with no headings.
+\let\headitemcrhook=\relax
+%
+% A \tab used to include \hskip1sp.  But then the space in a template
+% line is not enough.  That is bad.  So let's go back to just `&' until
+% we again encounter the problem the 1sp was intended to solve.
+%					--karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab  % insert after every tab.
+%
+\envdef\multitable{%
+  \vskip\parskip
+  \startsavinginserts
+  %
+  % @item within a multitable starts a normal row.
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
+  %
+  \tolerance=9500
+  \hbadness=9500
+  \setmultitablespacing
+  \parskip=\multitableparskip
+  \parindent=\multitableparindent
+  \overfullrule=0pt
+  \global\colcount=0
+  %
+  \everycr = {%
+    \noalign{%
+      \global\everytab={}% Reset from possible headitem.
+      \global\colcount=0 % Reset the column counter.
+      %
+      % Check for saved footnotes, etc.:
+      \checkinserts
+      %
+      % Perhaps a \nobreak, then reset:
+      \headitemcrhook
+      \global\let\headitemcrhook=\relax
+    }%
+  }%
+  %
+  \parsearg\domultitable
+}
+\def\domultitable#1{%
+  % To parse everything between @multitable and @item:
+  \setuptable#1 \endsetuptable
+  %
+  % This preamble sets up a generic column definition, which will
+  % be used as many times as user calls for columns.
+  % \vtop will set a single line and will also let text wrap and
+  % continue for many paragraphs if desired.
+  \halign\bgroup &%
+    \global\advance\colcount by 1
+    \multistrut
+    \vtop{%
+      % Use the current \colcount to find the correct column width:
+      \hsize=\expandafter\csname col\the\colcount\endcsname
+      %
+      % In order to keep entries from bumping into each other
+      % we will add a \leftskip of \multitablecolspace to all columns after
+      % the first one.
+      %
+      % If a template has been used, we will add \multitablecolspace
+      % to the width of each template entry.
+      %
+      % If the user has set preamble in terms of percent of \hsize we will
+      % use that dimension as the width of the column, and the \leftskip
+      % will keep entries from bumping into each other.  Table will start at
+      % left margin and final column will justify at right margin.
+      %
+      % Make sure we don't inherit \rightskip from the outer environment.
+      \rightskip=0pt
+      \ifnum\colcount=1
+	% The first column will be indented with the surrounding text.
+	\advance\hsize by\leftskip
+      \else
+	\ifsetpercent \else
+	  % If user has not set preamble in terms of percent of \hsize
+	  % we will advance \hsize by \multitablecolspace.
+	  \advance\hsize by \multitablecolspace
+	\fi
+       % In either case we will make \leftskip=\multitablecolspace:
+      \leftskip=\multitablecolspace
+      \fi
+      % Ignoring space at the beginning and end avoids an occasional spurious
+      % blank line, when TeX decides to break the line at the space before the
+      % box from the multistrut, so the strut ends up on a line by itself.
+      % For example:
+      % @multitable @columnfractions .11 .89
+      % @item @code{#}
+      % @tab Legal holiday which is valid in major parts of the whole country.
+      % Is automatically provided with highlighting sequences respectively
+      % marking characters.
+      \noindent\ignorespaces##\unskip\multistrut
+    }\cr
+}
+\def\Emultitable{%
+  \crcr
+  \egroup % end the \halign
+  \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+%        If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed.  They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested.  But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+  \expandafter\let\csname #1\endcsname = \relax
+  \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+  % Scan in ``verbatim'' mode:
+  \obeylines
+  \catcode`\@ = \other
+  \catcode`\{ = \other
+  \catcode`\} = \other
+  %
+  % Make sure that spaces turn into tokens that match what \doignoretext wants.
+  \spaceisspace
+  %
+  % Count number of #1's that we've seen.
+  \doignorecount = 0
+  %
+  % Swallow text until we reach the matching `@end #1'.
+  \dodoignore{#1}%
+}
+
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+  \obeylines %
+  %
+  \gdef\dodoignore#1{%
+    % #1 contains the command name as a string, e.g., `ifinfo'.
+    %
+    % Define a command to find the next `@end #1'.
+    \long\def\doignoretext##1^^M@end #1{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
+    %
+    % And this command to find another #1 command, at the beginning of a
+    % line.  (Otherwise, we would consider a line `@c @ifset', for
+    % example, to count as an @ifset for nesting.)
+    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+    %
+    % And now expand that command.
+    \doignoretext ^^M%
+  }%
+}
+
+\def\doignoreyyy#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty			% Nothing found.
+    \let\next\doignoretextzzz
+  \else					% Found a nested condition, ...
+    \advance\doignorecount by 1
+    \let\next\doignoretextyyy		% ..., look for another.
+    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \fi
+  \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+  \ifnum\doignorecount = 0	% We have just found the outermost @end.
+    \let\next\enddoignore
+  \else				% Still inside a nested condition.
+    \advance\doignorecount by -1
+    \let\next\doignoretext      % Look for the next @end.
+  \fi
+  \next
+}
+
+% Finish off ignored text.
+{ \obeylines%
+  % Ignore anything after the last `@end #1'; this matters in verbatim
+  % environments, where otherwise the newline after an ignored conditional
+  % would result in a blank line in the output.
+  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
+
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+  {%
+    \makevalueexpandable
+    \def\temp{#2}%
+    \edef\next{\gdef\makecsname{SET#1}}%
+    \ifx\temp\empty
+      \next{}%
+    \else
+      \setzzz#2\endsetzzz
+    \fi
+  }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+  {%
+    \makevalueexpandable
+    \global\expandafter\let\csname SET#1\endcsname=\relax
+  }%
+}
+
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+  \catcode`\-=\active \catcode`\_=\active
+  %
+  \gdef\makevalueexpandable{%
+    \let\value = \expandablevalue
+    % We don't want these characters active, ...
+    \catcode`\-=\other \catcode`\_=\other
+    % ..., but we might end up with active ones in the argument if
+    % we're called from @code, as @code{@value{foo-bar_}}, though.
+    % So \let them to their normal equivalents.
+    \let-\normaldash \let_\normalunderscore
+  }
+}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file.  This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+% 
+% Unfortunately, this has the consequence that when _ is in the *value*
+% of an @set, it does not print properly in the roman fonts (get the cmr
+% dot accent at position 126 instead).  No fix comes to mind, and it's
+% been this way since 2003 or earlier, so just ignore it.
+% 
+\def\expandablevalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {[No value for ``#1'']}%
+    \message{Variable `#1', used in @value, is not set.}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% Like \expandablevalue, but completely expandable (the \message in the
+% definition above operates at the execution level of TeX).  Used when
+% writing to auxiliary files, due to the expansion that \write does.
+% If flag is undefined, pass through an unexpanded @value command: maybe it 
+% will be set by the time it is read back in.
+%
+% NB flag names containing - or _ may not work here.
+\def\dummyvalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    \noexpand\value{#1}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% Used for @value's in index entries to form the sort key: expand the @value
+% if possible, otherwise sort late.
+\def\indexnofontsvalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    ZZZZZZZ
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+% 
+% To get the special treatment we need for `@end ifset,' we call
+% \makecond and then redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+  {%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname SET#2\endcsname\relax
+      #1% If not set, redefine \next.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifsetfail{\doignore{ifset}}
+
+% @ifclear VAR ... @end executes the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
+
+% @ifcommandisdefined CMD ... @end executes the `...' if CMD (written
+% without the @) is in fact defined.  We can only feasibly check at the
+% TeX level, so something like `mathcode' is going to considered
+% defined even though it is not a Texinfo command.
+% 
+\makecond{ifcommanddefined}
+\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
+%
+\def\doifcmddefined#1#2{{%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname #2\endcsname\relax
+      #1% If not defined, \let\next as above.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifcmddefinedfail{\doignore{ifcommanddefined}}
+
+% @ifcommandnotdefined CMD ... handled similar to @ifclear above.
+\makecond{ifcommandnotdefined}
+\def\ifcommandnotdefined{%
+  \parsearg{\doifcmddefined{\else \let\next=\ifcmdnotdefinedfail}}}
+\def\ifcmdnotdefinedfail{\doignore{ifcommandnotdefined}}
+
+% Set the `txicommandconditionals' variable, so documents have a way to
+% test if the @ifcommand...defined conditionals are available.
+\set txicommandconditionals
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
+
+% \newindex {foo} defines an index named IX.
+% It automatically defines \IXindex such that
+% \IXindex ...rest of line... puts an entry in the index IX.
+% It also defines \IXindfile to be the number of the output channel for
+% the file that accumulates this index.  The file's extension is IX.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+  \expandafter\chardef\csname#1indfile\endcsname=0
+  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
+    \noexpand\doindex{#1}}
+}
+
+% @defindex foo  ==  \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+  \expandafter\chardef\csname#1indfile\endcsname=0
+  \expandafter\xdef\csname#1index\endcsname{%
+    \noexpand\docodeindex{#1}}%
+}
+
+% The default indices:
+\newindex{cp}%      concepts,
+\newcodeindex{fn}%  functions,
+\newcodeindex{vr}%  variables,
+\newcodeindex{tp}%  types,
+\newcodeindex{ky}%  keys
+\newcodeindex{pg}%  and programs.
+
+
+% @synindex foo bar    makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar   similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+  \requireopenindexfile{#3}%
+  % redefine \fooindfile:
+  \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+  \expandafter\let\csname#2indfile\endcsname=\temp
+  % redefine \fooindex:
+  \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all index macros.
+% Argument #1 is generated by the calling \fooindex macro,
+% and it is the two-letter name of the index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\doindexxxx}
+\def\doindexxxx #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
+\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}}
+
+
+% Used when writing an index entry out to an index file to prevent
+% expansion of Texinfo commands that can appear in an index entry.
+%
+\def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
+  \definedummyletter\@%
+  \definedummyletter\ %
+  %
+  % For texindex which always views { and } as separators.
+  \def\{{\lbracechar{}}%
+  \def\}{\rbracechar{}}%
+  %
+  % Do the redefinitions.
+  \definedummies
+}
+
+% Used for the aux and toc files, where @ is the escape character.
+%
+\def\atdummies{%
+  \definedummyletter\@%
+  \definedummyletter\ %
+  \definedummyletter\{%
+  \definedummyletter\}%
+  %
+  % Do the redefinitions.
+  \definedummies
+  \otherbackslash
+}
+
+% \definedummyword defines \#1 as \string\#1\space, thus effectively
+% preventing its expansion.  This is used only for control words,
+% not control letters, because the \space would be incorrect for
+% control characters, but is needed to separate the control word
+% from whatever follows.
+%
+% These can be used both for control words that take an argument and
+% those that do not.  If it is followed by {arg} in the input, then
+% that will dutifully get written to the index (or wherever).
+%
+% For control letters, we have \definedummyletter, which omits the
+% space.
+%
+\def\definedummyword  #1{\def#1{\string#1\space}}%
+\def\definedummyletter#1{\def#1{\string#1}}%
+\let\definedummyaccent\definedummyletter
+
+% Called from \indexdummies and \atdummies, to effectively prevent
+% the expansion of commands.
+%
+\def\definedummies{%
+  %
+  \let\commondummyword\definedummyword
+  \let\commondummyletter\definedummyletter
+  \let\commondummyaccent\definedummyaccent
+  \commondummiesnofonts
+  %
+  \definedummyletter\_%
+  \definedummyletter\-%
+  %
+  % Non-English letters.
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\DH
+  \definedummyword\L
+  \definedummyword\O
+  \definedummyword\OE
+  \definedummyword\TH
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\dh
+  \definedummyword\exclamdown
+  \definedummyword\l
+  \definedummyword\o
+  \definedummyword\oe
+  \definedummyword\ordf
+  \definedummyword\ordm
+  \definedummyword\questiondown
+  \definedummyword\ss
+  \definedummyword\th
+  %
+  % Although these internal commands shouldn't show up, sometimes they do.
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
+  %
+  \definedummyword\LaTeX
+  \definedummyword\TeX
+  %
+  % Assorted special characters.
+  \definedummyword\atchar
+  \definedummyword\arrow
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\entrybreak
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\geq
+  \definedummyword\guillemetleft
+  \definedummyword\guillemetright
+  \definedummyword\guilsinglleft
+  \definedummyword\guilsinglright
+  \definedummyword\lbracechar
+  \definedummyword\leq
+  \definedummyword\mathopsup
+  \definedummyword\minus
+  \definedummyword\ogonek
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\quotedblbase
+  \definedummyword\quotedblleft
+  \definedummyword\quotedblright
+  \definedummyword\quoteleft
+  \definedummyword\quoteright
+  \definedummyword\quotesinglbase
+  \definedummyword\rbracechar
+  \definedummyword\result
+  \definedummyword\sub
+  \definedummyword\sup
+  \definedummyword\textdegree
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  \let\value\dummyvalue
+  %
+  \normalturnoffactive
+}
+
+% \commondummiesnofonts: common to \definedummies and \indexnofonts.
+% Define \commondummyletter, \commondummyaccent and \commondummyword before
+% using.  Used for accents, font commands, and various control letters.
+%
+\def\commondummiesnofonts{%
+  % Control letters and accents.
+  \commondummyletter\!%
+  \commondummyaccent\"%
+  \commondummyaccent\'%
+  \commondummyletter\*%
+  \commondummyaccent\,%
+  \commondummyletter\.%
+  \commondummyletter\/%
+  \commondummyletter\:%
+  \commondummyaccent\=%
+  \commondummyletter\?%
+  \commondummyaccent\^%
+  \commondummyaccent\`%
+  \commondummyaccent\~%
+  \commondummyword\u
+  \commondummyword\v
+  \commondummyword\H
+  \commondummyword\dotaccent
+  \commondummyword\ogonek
+  \commondummyword\ringaccent
+  \commondummyword\tieaccent
+  \commondummyword\ubaraccent
+  \commondummyword\udotaccent
+  \commondummyword\dotless
+  %
+  % Texinfo font commands.
+  \commondummyword\b
+  \commondummyword\i
+  \commondummyword\r
+  \commondummyword\sansserif
+  \commondummyword\sc
+  \commondummyword\slanted
+  \commondummyword\t
+  %
+  % Commands that take arguments.
+  \commondummyword\abbr
+  \commondummyword\acronym
+  \commondummyword\anchor
+  \commondummyword\cite
+  \commondummyword\code
+  \commondummyword\command
+  \commondummyword\dfn
+  \commondummyword\dmn
+  \commondummyword\email
+  \commondummyword\emph
+  \commondummyword\env
+  \commondummyword\file
+  \commondummyword\image
+  \commondummyword\indicateurl
+  \commondummyword\inforef
+  \commondummyword\kbd
+  \commondummyword\key
+  \commondummyword\math
+  \commondummyword\option
+  \commondummyword\pxref
+  \commondummyword\ref
+  \commondummyword\samp
+  \commondummyword\strong
+  \commondummyword\tie
+  \commondummyword\U
+  \commondummyword\uref
+  \commondummyword\url
+  \commondummyword\var
+  \commondummyword\verb
+  \commondummyword\w
+  \commondummyword\xref
+}
+
+% For testing: output @{ and @} in index sort strings as \{ and \}.
+\newif\ifusebracesinindexes
+
+\let\indexlbrace\relax
+\let\indexrbrace\relax
+
+{\catcode`\@=0
+\catcode`\\=13
+  @gdef@backslashdisappear{@def\{}}
+}
+
+{
+\catcode`\<=13
+\catcode`\-=13
+\catcode`\`=13
+  \gdef\indexnonalnumdisappear{%
+    \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax\else
+      % @set txiindexlquoteignore makes us ignore left quotes in the sort term.
+      % (Introduced for FSFS 2nd ed.)
+      \let`=\empty
+    \fi
+    %
+    \expandafter\ifx\csname SETtxiindexbackslashignore\endcsname\relax\else
+      \backslashdisappear
+    \fi
+    %
+    \expandafter\ifx\csname SETtxiindexhyphenignore\endcsname\relax\else
+      \def-{}%
+    \fi
+    \expandafter\ifx\csname SETtxiindexlessthanignore\endcsname\relax\else
+      \def<{}%
+    \fi
+    \expandafter\ifx\csname SETtxiindexatsignignore\endcsname\relax\else
+      \def\@{}%
+    \fi
+  }
+
+  \gdef\indexnonalnumreappear{%
+    \useindexbackslash
+    \let-\normaldash
+    \let<\normalless
+    \def\@{@}%
+  }
+}
+
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names.  It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+  % Accent commands should become @asis.
+  \def\commondummyaccent##1{\let##1\asis}%
+  % We can just ignore other control letters.
+  \def\commondummyletter##1{\let##1\empty}%
+  % All control words become @asis by default; overrides below.
+  \let\commondummyword\commondummyaccent
+  \commondummiesnofonts
+  %
+  % Don't no-op \tt, since it isn't a user-level command
+  % and is used in the definitions of the active chars like <, >, |, etc.
+  % Likewise with the other plain tex font commands.
+  %\let\tt=\asis
+  %
+  \def\ { }%
+  \def\@{@}%
+  \def\_{\normalunderscore}%
+  \def\-{}% @- shouldn't affect sorting
+  %
+  \uccode`\1=`\{ \uppercase{\def\{{1}}%
+  \uccode`\1=`\} \uppercase{\def\}{1}}%
+  \let\lbracechar\{%
+  \let\rbracechar\}%
+  %
+  % Non-English letters.
+  \def\AA{AA}%
+  \def\AE{AE}%
+  \def\DH{DZZ}%
+  \def\L{L}%
+  \def\OE{OE}%
+  \def\O{O}%
+  \def\TH{TH}%
+  \def\aa{aa}%
+  \def\ae{ae}%
+  \def\dh{dzz}%
+  \def\exclamdown{!}%
+  \def\l{l}%
+  \def\oe{oe}%
+  \def\ordf{a}%
+  \def\ordm{o}%
+  \def\o{o}%
+  \def\questiondown{?}%
+  \def\ss{ss}%
+  \def\th{th}%
+  %
+  \def\LaTeX{LaTeX}%
+  \def\TeX{TeX}%
+  %
+  % Assorted special characters.  \defglyph gives the control sequence a
+  % definition that removes the {} that follows its use.
+  \defglyph\atchar{@}%
+  \defglyph\arrow{->}%
+  \defglyph\bullet{bullet}%
+  \defglyph\comma{,}%
+  \defglyph\copyright{copyright}%
+  \defglyph\dots{...}%
+  \defglyph\enddots{...}%
+  \defglyph\equiv{==}%
+  \defglyph\error{error}%
+  \defglyph\euro{euro}%
+  \defglyph\expansion{==>}%
+  \defglyph\geq{>=}%
+  \defglyph\guillemetleft{<<}%
+  \defglyph\guillemetright{>>}%
+  \defglyph\guilsinglleft{<}%
+  \defglyph\guilsinglright{>}%
+  \defglyph\leq{<=}%
+  \defglyph\lbracechar{\{}%
+  \defglyph\minus{-}%
+  \defglyph\point{.}%
+  \defglyph\pounds{pounds}%
+  \defglyph\print{-|}%
+  \defglyph\quotedblbase{"}%
+  \defglyph\quotedblleft{"}%
+  \defglyph\quotedblright{"}%
+  \defglyph\quoteleft{`}%
+  \defglyph\quoteright{'}%
+  \defglyph\quotesinglbase{,}%
+  \defglyph\rbracechar{\}}%
+  \defglyph\registeredsymbol{R}%
+  \defglyph\result{=>}%
+  \defglyph\textdegree{o}%
+  %
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  %
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  %
+  \macrolist
+  \let\value\indexnofontsvalue
+}
+\def\defglyph#1#2{\def#1##1{#2}} % see above
+
+
+
+
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+% TODO: Two-level index?  Operation index?
+
+% Workhorse for all indexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+  \iflinks
+  {%
+    \requireopenindexfile{#1}%
+    % Store the main index entry text (including the third arg).
+    \toks0 = {#2}%
+    % If third arg is present, precede it with a space.
+    \def\thirdarg{#3}%
+    \ifx\thirdarg\empty \else
+      \toks0 = \expandafter{\the\toks0 \space #3}%
+    \fi
+    %
+    \edef\writeto{\csname#1indfile\endcsname}%
+    %
+    \safewhatsit\dosubindwrite
+  }%
+  \fi
+}
+
+% Check if an index file has been opened, and if not, open it.
+\def\requireopenindexfile#1{%
+\ifnum\csname #1indfile\endcsname=0
+  \expandafter\newwrite \csname#1indfile\endcsname
+  \edef\suffix{#1}%
+  % A .fls suffix would conflict with the file extension for the output
+  % of -recorder, so use .f1s instead.
+  \ifx\suffix\indexisfl\def\suffix{f1}\fi
+  % Open the file
+  \immediate\openout\csname#1indfile\endcsname \jobname.\suffix
+  % Using \immediate above here prevents an object entering into the current 
+  % box, which could confound checks such as those in \safewhatsit for
+  % preceding skips.
+  \typeout{Writing index file \jobname.\suffix}%
+\fi}
+\def\indexisfl{fl}
+
+% Output \ as {\indexbackslash}, because \ is an escape character in
+% the index files.
+\let\indexbackslash=\relax
+{\catcode`\@=0 \catcode`\\=\active
+  @gdef@useindexbackslash{@def\{{@indexbackslash}}}
+}
+
+% Definition for writing index entry text.
+\def\sortas#1{\ignorespaces}%
+
+% Definition for writing index entry sort key.  Should occur at the at
+% the beginning of the index entry, like
+%     @cindex @sortas{september} \september
+% The \ignorespaces takes care of following space, but there's no way
+% to remove space before it.
+{
+\catcode`\-=13
+\gdef\indexwritesortas{%
+  \begingroup
+  \indexnonalnumreappear
+  \indexwritesortasxxx}
+\gdef\indexwritesortasxxx#1{%
+  \xdef\indexsortkey{#1}\endgroup}
+}
+
+
+% Write the entry in \toks0 to the index file.
+%
+\def\dosubindwrite{%
+  % Put the index entry in the margin if desired.
+  \ifx\SETmarginindex\relax\else
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+  \fi
+  %
+  % Remember, we are within a group.
+  \indexdummies % Must do this here, since \bf, etc expand at this stage
+  \useindexbackslash % \indexbackslash isn't defined now so it will be output 
+                     % as is; and it will print as backslash.
+  % The braces around \indexbrace are recognized by texindex.
+  %
+  % Get the string to sort by, by processing the index entry with all
+  % font commands turned off.
+  {\indexnofonts
+   \def\lbracechar{{\indexlbrace}}%
+   \def\rbracechar{{\indexrbrace}}%
+   \let\{=\lbracechar
+   \let\}=\rbracechar
+   \indexnonalnumdisappear
+   \xdef\indexsortkey{}%
+   \let\sortas=\indexwritesortas
+   \edef\temp{\the\toks0}%
+   \setbox\dummybox = \hbox{\temp}% Make sure to execute any \sortas
+   \ifx\indexsortkey\empty
+     \xdef\indexsortkey{\temp}%
+     \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi
+   \fi
+  }%
+  %
+  % Set up the complete index entry, with both the sort key and
+  % the original text, including any font commands.  We write
+  % three arguments to \entry to the .?? file (four in the
+  % subentry case), texindex reduces to two when writing the .??s
+  % sorted result.
+  \edef\temp{%
+    \write\writeto{%
+      \string\entry{\indexsortkey}{\noexpand\folio}{\the\toks0}}%
+  }%
+  \temp
+}
+\newbox\dummybox % used above
+
+% Take care of unwanted page breaks/skips around a whatsit:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again.  Otherwise, the whatsit generated by the
+% \write or \pdfdest will make \lastskip zero.  The result is that
+% sequences like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode.  We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip.  \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip.  The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+\newskip\whatsitskip
+\newcount\whatsitpenalty
+%
+% ..., ready, GO:
+%
+\def\safewhatsit#1{\ifhmode
+  #1%
+ \else
+  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+  \whatsitskip = \lastskip
+  \edef\lastskipmacro{\the\lastskip}%
+  \whatsitpenalty = \lastpenalty
+  %
+  % If \lastskip is nonzero, that means the last item was a
+  % skip.  And since a skip is discardable, that means this
+  % -\whatsitskip glue we're inserting is preceded by a
+  % non-discardable item, therefore it is not a potential
+  % breakpoint, therefore no \nobreak needed.
+  \ifx\lastskipmacro\zeroskipmacro
+  \else
+    \vskip-\whatsitskip
+  \fi
+  %
+  #1%
+  %
+  \ifx\lastskipmacro\zeroskipmacro
+    % If \lastskip was zero, perhaps the last item was a penalty, and
+    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
+    % to re-insert the same penalty (values >10000 are used for various
+    % signals); since we just inserted a non-discardable item, any
+    % following glue (such as a \parskip) would be a breakpoint.  For example:
+    %   @deffn deffn-whatever
+    %   @vindex index-whatever
+    %   Description.
+    % would allow a break between the index-whatever whatsit
+    % and the "Description." paragraph.
+    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
+  \else
+    % On the other hand, if we had a nonzero \lastskip,
+    % this make-up glue would be preceded by a non-discardable item
+    % (the whatsit from the \write), so we must insert a \nobreak.
+    \nobreak\vskip\whatsitskip
+  \fi
+\fi}
+
+% The index entry written in the file actually looks like
+%  \entry {sortstring}{page}{topic}
+% or
+%  \entry {sortstring}{page}{topic}{subtopic}
+% The texindex program reads in these files and writes files
+% containing these kinds of lines:
+%  \initial {c}
+%     before the first topic whose initial is c
+%  \entry {topic}{pagelist}
+%     for a topic that is used without subtopics
+%  \primary {topic}
+%     for the beginning of a topic that is used with subtopics
+%  \secondary {subtopic}{pagelist}
+%     for each subtopic.
+
+% Define the user-accessible indexing commands
+% @findex, @vindex, @kindex, @cindex.
+
+\def\findex {\fnindex}
+\def\kindex {\kyindex}
+\def\cindex {\cpindex}
+\def\vindex {\vrindex}
+\def\tindex {\tpindex}
+\def\pindex {\pgindex}
+
+\def\cindexsub {\begingroup\obeylines\cindexsub}
+{\obeylines %
+\gdef\cindexsub "#1" #2^^M{\endgroup %
+\dosubind{cp}{#2}{#1}}}
+
+% Define the macros used in formatting output of the sorted index material.
+
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+  \dobreak \chapheadingskip{10000}%
+  %
+  \smallfonts \rm
+  \tolerance = 9500
+  \plainfrenchspacing
+  \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+  %
+  % See if the index file exists and is nonempty.
+  % Change catcode of @ here so that if the index file contains
+  % \initial {@}
+  % as its first line, TeX doesn't complain about mismatched braces
+  % (because it thinks @} is a control sequence).
+  \catcode`\@ = 12
+  % See comment in \requireopenindexfile.
+  \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi
+  \openin 1 \jobname.\indexname s
+  \ifeof 1
+    % \enddoublecolumns gets confused if there is no text in the index,
+    % and it loses the chapter title and the aux file entries for the
+    % index.  The easiest way to prevent this problem is to make sure
+    % there is some text.
+    \putwordIndexNonexistent
+    \typeout{No file \jobname.\indexname s.}%
+  \else
+    \catcode`\\ = 0
+    %
+    % If the index file exists but is empty, then \openin leaves \ifeof
+    % false.  We have to make TeX try to read something from the file, so
+    % it can discover if there is anything in it.
+    \read 1 to \thisline
+    \ifeof 1
+      \putwordIndexIsEmpty
+    \else
+      % Index files are almost Texinfo source, but we use \ as the escape
+      % character.  It would be better to use @, but that's too big a change
+      % to make right now.
+      \def\indexbackslash{\ttbackslash}%
+      \let\indexlbrace\{   % Likewise, set these sequences for braces
+      \let\indexrbrace\}   % used in the sort key.
+      \begindoublecolumns
+      \let\entrywidowpenalty=\indexwidowpenalty
+      %
+      % Read input from the index file line by line.
+      \loopdo
+        \ifeof1
+          \let\firsttoken\relax
+        \else
+          \read 1 to \nextline
+          \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}%
+          \act
+        \fi
+        \thisline
+        %
+        \ifeof1\else
+        \let\thisline\nextline
+      \repeat
+      %%
+      \enddoublecolumns
+    \fi
+  \fi
+  \closein 1
+\endgroup}
+
+\def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken}
+\long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1}
+
+\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx}
+\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next}
+
+% These macros are used by the sorted index file itself.
+% Change them to control the appearance of the index.
+
+{\catcode`\/=13 \catcode`\-=13 \catcode`\^=13 \catcode`\~=13 \catcode`\_=13
+\catcode`\|=13 \catcode`\<=13 \catcode`\>=13 \catcode`\+=13 \catcode`\"=13
+\catcode`\$=3
+\gdef\initialglyphs{%
+  % Some changes for non-alphabetic characters.  Using the glyphs from the
+  % math fonts looks more consistent than the typewriter font used elsewhere
+  % for these characters.
+  \def\indexbackslash{\math{\backslash}}%
+  \let\\=\indexbackslash
+  %
+  % Can't get bold backslash so don't use bold forward slash
+  \catcode`\/=13
+  \def/{{\secrmnotbold \normalslash}}%
+  \def-{{\normaldash\normaldash}}% en dash `--'
+  \def^{{\chapbf \normalcaret}}%
+  \def~{{\chapbf \normaltilde}}%
+  \def\_{%
+     \leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }%
+  \def|{$\vert$}%
+  \def<{$\less$}%
+  \def>{$\gtr$}%
+  \def+{$\normalplus$}%
+}}
+
+\def\initial{%
+  \bgroup
+  \initialglyphs
+  \initialx
+}
+
+\def\initialx#1{%
+  % Remove any glue we may have, we'll be inserting our own.
+  \removelastskip
+  %
+  % We like breaks before the index initials, so insert a bonus.
+  % The glue before the bonus allows a little bit of space at the
+  % bottom of a column to reduce an increase in inter-line spacing.
+  \nobreak
+  \vskip 0pt plus 5\baselineskip
+  \penalty -300 
+  \vskip 0pt plus -5\baselineskip
+  %
+  % Typeset the initial.  Making this add up to a whole number of
+  % baselineskips increases the chance of the dots lining up from column
+  % to column.  It still won't often be perfect, because of the stretch
+  % we need before each entry, but it's better.
+  %
+  % No shrink because it confuses \balancecolumns.
+  \vskip 1.67\baselineskip plus 1\baselineskip
+  \leftline{\secfonts \kern-0.05em \secbf #1}%
+  % \secfonts is inside the argument of \leftline so that the change of
+  % \baselineskip will not affect any glue inserted before the vbox that
+  % \leftline creates.
+  % Do our best not to break after the initial.
+  \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
+  \egroup % \initialglyphs
+}
+
+\newdimen\entryrightmargin
+\entryrightmargin=0pt
+
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin.  It is used for index
+% and table of contents entries.  The paragraph is indented by \leftskip.
+%
+\def\entry{%
+  \begingroup
+    %
+    % For pdfTeX and XeTeX.
+    % The redefinition of \domark stops marks being added in \pdflink to 
+    % preserve coloured links across page boundaries.  Otherwise the marks
+    % would get in the way of \lastbox in \insertindexentrybox.
+    \let\domark\relax
+    %
+    % Start a new paragraph if necessary, so our assignments below can't
+    % affect previous text.
+    \par
+    %
+    % No extra space above this paragraph.
+    \parskip = 0in
+    %
+    % When reading the text of entry, convert explicit line breaks
+    % from @* into spaces.  The user might give these in long section
+    % titles, for instance.
+    \def\*{\unskip\space\ignorespaces}%
+    \def\entrybreak{\hfil\break}% An undocumented command
+    %
+    % Swallow the left brace of the text (first parameter):
+    \afterassignment\doentry
+    \let\temp =
+}
+\def\entrybreak{\unskip\space\ignorespaces}%
+\def\doentry{%
+    % Save the text of the entry
+    \global\setbox\boxA=\hbox\bgroup
+    \bgroup % Instead of the swallowed brace.
+      \noindent
+      \aftergroup\finishentry
+      % And now comes the text of the entry.
+      % Not absorbing as a macro argument reduces the chance of problems
+      % with catcodes occurring.
+}
+{\catcode`\@=11
+\gdef\finishentry#1{%
+    \egroup % end box A
+    \dimen@ = \wd\boxA % Length of text of entry
+    \global\setbox\boxA=\hbox\bgroup\unhbox\boxA
+    % #1 is the page number.
+    %
+    % Get the width of the page numbers, and only use
+    % leaders if they are present.
+    \global\setbox\boxB = \hbox{#1}%
+    \ifdim\wd\boxB = 0pt
+      \null\nobreak\hfill\ %
+    \else
+      %
+      \null\nobreak\indexdotfill % Have leaders before the page number.
+      %
+      \ifpdf
+        \pdfgettoks#1.%
+        \hskip\skip\thinshrinkable\the\toksA
+      \else
+        \ifx\XeTeXrevision\thisisundefined
+          \hskip\skip\thinshrinkable #1%
+        \else
+          \pdfgettoks#1.%
+          \hskip\skip\thinshrinkable\the\toksA
+        \fi
+      \fi
+    \fi
+    \egroup % end \boxA
+    \ifdim\wd\boxB = 0pt
+      \global\setbox\entryindexbox=\vbox{\unhbox\boxA}%
+    \else
+    \global\setbox\entryindexbox=\vbox\bgroup
+      % We want the text of the entries to be aligned to the left, and the
+      % page numbers to be aligned to the right.
+      %
+      \parindent = 0pt
+      \advance\leftskip by 0pt plus 1fil
+      \advance\leftskip by 0pt plus -1fill
+      \rightskip = 0pt plus -1fil
+      \advance\rightskip by 0pt plus 1fill
+      % Cause last line, which could consist of page numbers on their own
+      % if the list of page numbers is long, to be aligned to the right.
+      \parfillskip=0pt plus -1fill
+      %
+      \advance\rightskip by \entryrightmargin
+      % Determine how far we can stretch into the margin.
+      % This allows, e.g., "Appendix H  GNU Free Documentation License" to
+      % fit on one line in @letterpaper format.
+      \ifdim\entryrightmargin>2.1em
+        \dimen@i=2.1em
+      \else
+        \dimen@i=0em
+      \fi
+      \advance \parfillskip by 0pt minus 1\dimen@i
+      %
+      \dimen@ii = \hsize
+      \advance\dimen@ii by -1\leftskip
+      \advance\dimen@ii by -1\entryrightmargin
+      \advance\dimen@ii by 1\dimen@i
+      \ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
+      \ifdim\dimen@ > 0.8\dimen@ii   % due to long index text
+        \dimen@ = 0.7\dimen@ % Try to split the text roughly evenly
+        \dimen@ii = \hsize
+        \ifnum\dimen@>\dimen@ii
+          % If the entry is too long, use the whole line
+          \dimen@ = \dimen@ii
+        \fi
+        \advance\leftskip by 0pt plus 1fill % ragged right
+        \advance \dimen@ by 1\rightskip
+        \parshape = 2 0pt \dimen@ 0em \dimen@ii
+        % Ideally we'd add a finite glue at the end of the first line only,
+        % instead of using \parshape with explicit line lengths, but TeX
+        % doesn't seem to provide a way to do such a thing.
+        %
+        \leftskip = 1em
+        \parindent = -1em
+      \fi\fi
+      \indent % start paragraph
+      \unhbox\boxA
+      %
+      % Do not prefer a separate line ending with a hyphen to fewer lines.
+      \finalhyphendemerits = 0
+      %
+      % Word spacing - no stretch
+      \spaceskip=\fontdimen2\font minus \fontdimen4\font
+      %
+      \linepenalty=1000  % Discourage line breaks.
+      \hyphenpenalty=5000  % Discourage hyphenation.
+      %
+      \par % format the paragraph
+    \egroup % The \vbox
+    \fi
+  \endgroup
+  % delay text of entry until after penalty
+  \bgroup\aftergroup\insertindexentrybox
+  \entrywidowpenalty
+}}
+
+\newskip\thinshrinkable
+\skip\thinshrinkable=.15em minus .15em
+
+\newbox\entryindexbox
+\def\insertindexentrybox{%
+  \ourunvbox\entryindexbox
+}
+
+% Use \lastbox to take apart vbox box by box, and add each sub-box
+% to the current vertical list.
+\def\ourunvbox#1{%
+\bgroup % for local binding of \delayedbox
+  % Remove the last box from box #1
+  \global\setbox#1=\vbox{%
+    \unvbox#1%
+    \unskip % remove any glue
+    \unpenalty
+    \global\setbox\interbox=\lastbox
+  }%
+  \setbox\delayedbox=\box\interbox
+  \ifdim\ht#1=0pt\else
+    \ourunvbox#1 % Repeat on what's left of the box
+    \nobreak
+  \fi
+  \box\delayedbox
+\egroup
+}
+\newbox\delayedbox
+\newbox\interbox
+
+% Default is no penalty
+\let\entrywidowpenalty\egroup
+
+% Used from \printindex.  \firsttoken should be the first token
+% after the \entry.  If it's not another \entry, we are at the last
+% line of a group of index entries, so insert a penalty to discourage
+% widowed index entries.
+\long\def\indexwidowpenalty{%
+  \def\isentry{\entry}%
+  \ifx\firsttoken\isentry
+  \else
+    \penalty 9000
+  \fi
+  \egroup % now comes the box added with \aftergroup
+}
+
+% Like plain.tex's \dotfill, except uses up at least 1 em.
+% The filll stretch here overpowers both the fil and fill stretch to push
+% the page number to the right.
+\def\indexdotfill{\cleaders
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1filll}
+
+
+\def\primary #1{\line{#1\hfil}}
+
+\newskip\secondaryindent \secondaryindent=0.5cm
+\def\secondary#1#2{{%
+  \parfillskip=0in
+  \parskip=0in
+  \hangindent=1in
+  \hangafter=1
+  \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+  \ifpdf
+    \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+  \else
+    \ifx\XeTeXrevision\thisisundefined
+      #2
+    \else
+      \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+    \fi
+  \fi
+  \par
+}}
+
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11  % private names
+
+\newbox\partialpage
+\newdimen\doublecolumnhsize
+
+% Use inside an output routine to save \topmark and \firstmark
+\def\savemarks{%
+  \global\savedtopmark=\expandafter{\topmark }%
+  \global\savedfirstmark=\expandafter{\firstmark }%
+}
+\newtoks\savedtopmark
+\newtoks\savedfirstmark
+
+% Set \topmark and \firstmark for next time \output runs.
+% Can't be run from withinside \output (because any material
+% added while an output routine is active, including 
+% penalties, is saved for after it finishes).  The page so far
+% should be empty, otherwise what's on it will be thrown away.
+\def\restoremarks{%
+  \mark{\the\savedtopmark}%
+  \bgroup\output = {%
+    \setbox\dummybox=\box\PAGE
+  }abc\eject\egroup
+  % "abc" because output routine doesn't fire for a completely empty page.
+  \mark{\the\savedfirstmark}%
+}
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+  % If not much space left on page, start a new page.
+  \ifdim\pagetotal>0.8\vsize\vfill\eject\fi
+  %
+  % Grab any single-column material above us.
+  \output = {%
+    %
+    % Here is a possibility not foreseen in manmac: if we accumulate a
+    % whole lot of material, we might end up calling this \output
+    % routine twice in a row (see the doublecol-lose test, which is
+    % essentially a couple of indexes with @setchapternewpage off).  In
+    % that case we just ship out what is in \partialpage with the normal
+    % output routine.  Generally, \partialpage will be empty when this
+    % runs and this will be a no-op.  See the indexspread.tex test case.
+    \ifvoid\partialpage \else
+      \onepageout{\pagecontents\partialpage}%
+    \fi
+    %
+    \global\setbox\partialpage = \vbox{%
+      % Unvbox the main output page.
+      \unvbox\PAGE
+      \kern-\topskip \kern\baselineskip
+    }%
+    \savemarks
+  }%
+  \eject % run that output routine to set \partialpage
+  \restoremarks
+  %
+  % We recover the two marks that the last output routine saved in order
+  % to propagate the information in marks added around a chapter heading,
+  % which could be otherwise be lost by the time the final page is output.
+  %
+  %
+  % Use the double-column output routine for subsequent pages.
+  \output = {\doublecolumnout}%
+  %
+  % Change the page size parameters.  We could do this once outside this
+  % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+  % format, but then we repeat the same computation.  Repeating a couple
+  % of assignments once per index is clearly meaningless for the
+  % execution time, so we may as well do it in one place.
+  %
+  % First we halve the line length, less a little for the gutter between
+  % the columns.  We compute the gutter based on the line length, so it
+  % changes automatically with the paper format.  The magic constant
+  % below is chosen so that the gutter has the same value (well, +-<1pt)
+  % as it did when we hard-coded it.
+  %
+  % We put the result in a separate register, \doublecolumhsize, so we
+  % can restore it in \pagesofar, after \hsize itself has (potentially)
+  % been clobbered.
+  %
+  \doublecolumnhsize = \hsize
+    \advance\doublecolumnhsize by -.04154\hsize
+    \divide\doublecolumnhsize by 2
+  \hsize = \doublecolumnhsize
+  %
+  % Double the \vsize as well.  (We don't need a separate register here,
+  % since nobody clobbers \vsize.)
+  \vsize = 2\vsize
+  %
+  % For the benefit of balancing columns
+  \advance\baselineskip by 0pt plus 0.5pt
+}
+
+% The double-column output routine for all double-column pages except
+% the last, which is done by \balancecolumns.
+%
+\def\doublecolumnout{%
+  %
+  \splittopskip=\topskip \splitmaxdepth=\maxdepth
+  % Get the available space for the double columns -- the normal
+  % (undoubled) page height minus any material left over from the
+  % previous page.
+  \dimen@ = \vsize
+  \divide\dimen@ by 2
+  \advance\dimen@ by -\ht\partialpage
+  %
+  % box0 will be the left-hand column, box2 the right.
+  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \onepageout\pagesofar
+  \unvbox255
+  \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+  \unvbox\partialpage
+  %
+  \hsize = \doublecolumnhsize
+  \wd0=\hsize \wd2=\hsize
+  \hbox to\txipagewidth{\box0\hfil\box2}%
+}
+
+
+% Finished with with double columns.
+\def\enddoublecolumns{%
+  % The following penalty ensures that the page builder is exercised
+  % _before_ we change the output routine.  This is necessary in the
+  % following situation:
+  %
+  % The last section of the index consists only of a single entry.
+  % Before this section, \pagetotal is less than \pagegoal, so no
+  % break occurs before the last section starts.  However, the last
+  % section, consisting of \initial and the single \entry, does not
+  % fit on the page and has to be broken off.  Without the following
+  % penalty the page builder will not be exercised until \eject
+  % below, and by that time we'll already have changed the output
+  % routine to the \balancecolumns version, so the next-to-last
+  % double-column page will be processed with \balancecolumns, which
+  % is wrong:  The two columns will go to the main vertical list, with
+  % the broken-off section in the recent contributions.  As soon as
+  % the output routine finishes, TeX starts reconsidering the page
+  % break.  The two columns and the broken-off section both fit on the
+  % page, because the two columns now take up only half of the page
+  % goal.  When TeX sees \eject from below which follows the final
+  % section, it invokes the new output routine that we've set after
+  % \balancecolumns below; \onepageout will try to fit the two columns
+  % and the final section into the vbox of \txipageheight (see
+  % \pagebody), causing an overfull box.
+  %
+  % Note that glue won't work here, because glue does not exercise the
+  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
+  \penalty0
+  %
+  \output = {%
+    % Split the last of the double-column material.
+    \savemarks
+    \balancecolumns
+    %
+    % Having called \balancecolumns once, we do not
+    % want to call it again.  Therefore, reset \output to its normal
+    % definition right away.
+    \global\output = {\onepageout{\pagecontents\PAGE}}%
+  }%
+  \eject
+  \endgroup % started in \begindoublecolumns
+  \restoremarks
+  % Leave the double-column material on the current page, no automatic
+  % page break.
+  \box\balancedcolumns
+  %
+  % \pagegoal was set to the doubled \vsize above, since we restarted
+  % the current page.  We're now back to normal single-column
+  % typesetting, so reset \pagegoal to the normal \vsize (after the
+  % \endgroup where \vsize got restored).
+  \pagegoal = \vsize
+}
+\newbox\balancedcolumns
+\setbox\balancedcolumns=\vbox{shouldnt see this}%
+%
+% Only called for the last of the double column material.  \doublecolumnout 
+% does the others.
+\def\balancecolumns{%
+  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \dimen@ = \ht0
+  \advance\dimen@ by \topskip
+  \advance\dimen@ by-\baselineskip
+  \ifdim\dimen@<5\baselineskip
+    % Don't split a short final column in two.
+    \setbox2=\vbox{}%
+  \else
+    \divide\dimen@ by 2 % target to split to
+    \dimen@ii = \dimen@
+    \splittopskip = \topskip
+    % Loop until left column is at least as high as the right column.
+    {%
+      \vbadness = 10000
+      \loop
+        \global\setbox3 = \copy0
+        \global\setbox1 = \vsplit3 to \dimen@
+      \ifdim\ht1<\ht3
+        \global\advance\dimen@ by 1pt
+      \repeat
+    }%
+    % Now the left column is in box 1, and the right column in box 3.
+    % Check whether the left column has come out higher than the page itself.  
+    % (Note that we have doubled \vsize for the double columns, so
+    % the actual height of the page is 0.5\vsize).
+    \ifdim2\ht1>\vsize
+      % Just split the last of the double column material roughly in half.
+      \setbox2=\box0
+      \setbox0 = \vsplit2 to \dimen@ii
+      \setbox0=\vbox to \dimen@ii {\unvbox0\vfill}%
+      \setbox2=\vbox to \dimen@ii {\unvbox2\vfill}%
+    \else
+      % Compare the heights of the two columns.
+      \ifdim4\ht1>5\ht3
+        % Column heights are too different, so don't make their bottoms
+        % flush with each other.
+        \setbox2=\vbox to \ht1 {\unvbox3\vfill}%
+        \setbox0=\vbox to \ht1 {\unvbox1\vfill}%
+      \else
+        % Make column bottoms flush with each other.
+        \setbox2=\vbox to\ht1{\unvbox3\unskip}%
+        \setbox0=\vbox to\ht1{\unvbox1\unskip}%
+      \fi
+    \fi
+  \fi
+  %
+  \global\setbox\balancedcolumns=\vbox{\pagesofar}%
+}
+\catcode`\@ = \other
+
+
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% Let's start with @part.
+\outer\parseargdef\part{\partzzz{#1}}
+\def\partzzz#1{%
+  \chapoddpage
+  \null
+  \vskip.3\vsize  % move it down on the page a bit
+  \begingroup
+    \noindent \titlefonts\rm #1\par % the text
+    \let\lastnode=\empty      % no node to associate with
+    \writetocentry{part}{#1}{}% but put it in the toc
+    \headingsoff              % no headline or footline on the part page
+    % This outputs a mark at the end of the page that clears \thischapter
+    % and \thissection, as is done in \startcontents.
+    \let\pchapsepmacro\relax
+    \chapmacro{}{Yomitfromtoc}{}%
+    \chapoddpage
+  \endgroup
+}
+
+% \unnumberedno is an oxymoron.  But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number".  We avoid collisions with chapter
+% numbers by starting them at 10000.  (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno        \secno=0
+\newcount\subsecno     \subsecno=0
+\newcount\subsubsecno  \subsubsecno=0
+
+% This counter is funny since it counts through charcodes of letters A, B, ...
+\newcount\appendixno  \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+  \ifnum\appendixno=`A A%
+  \else\ifnum\appendixno=`B B%
+  \else\ifnum\appendixno=`C C%
+  \else\ifnum\appendixno=`D D%
+  \else\ifnum\appendixno=`E E%
+  \else\ifnum\appendixno=`F F%
+  \else\ifnum\appendixno=`G G%
+  \else\ifnum\appendixno=`H H%
+  \else\ifnum\appendixno=`I I%
+  \else\ifnum\appendixno=`J J%
+  \else\ifnum\appendixno=`K K%
+  \else\ifnum\appendixno=`L L%
+  \else\ifnum\appendixno=`M M%
+  \else\ifnum\appendixno=`N N%
+  \else\ifnum\appendixno=`O O%
+  \else\ifnum\appendixno=`P P%
+  \else\ifnum\appendixno=`Q Q%
+  \else\ifnum\appendixno=`R R%
+  \else\ifnum\appendixno=`S S%
+  \else\ifnum\appendixno=`T T%
+  \else\ifnum\appendixno=`U U%
+  \else\ifnum\appendixno=`V V%
+  \else\ifnum\appendixno=`W W%
+  \else\ifnum\appendixno=`X X%
+  \else\ifnum\appendixno=`Y Y%
+  \else\ifnum\appendixno=`Z Z%
+  % The \the is necessary, despite appearances, because \appendixletter is
+  % expanded while writing the .toc file.  \char\appendixno is not
+  % expandable, thus it is written literally, thus all appendixes come out
+  % with the same letter (or @) in the toc without it.
+  \else\char\the\appendixno
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter.  Page headings and footings can use
+% these.  @section does likewise.
+\def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
+\def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achieve this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unnlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+  % Compute the abs. sec. level:
+  \absseclevel=#2
+  \advance\absseclevel by \secbase
+  % Make sure \absseclevel doesn't fall outside the range:
+  \ifnum \absseclevel < 0
+    \absseclevel = 0
+  \else
+    \ifnum \absseclevel > 3
+      \absseclevel = 3
+    \fi
+  \fi
+  % The heading type:
+  \def\headtype{#1}%
+  \if \headtype U%
+    \ifnum \absseclevel < \unnlevel
+      \chardef\unnlevel = \absseclevel
+    \fi
+  \else
+    % Check for appendix sections:
+    \ifnum \absseclevel = 0
+      \edef\chapheadtype{\headtype}%
+    \else
+      \if \headtype A\if \chapheadtype N%
+	\errmessage{@appendix... within a non-appendix chapter}%
+      \fi\fi
+    \fi
+    % Check for numbered within unnumbered:
+    \ifnum \absseclevel > \unnlevel
+      \def\headtype{U}%
+    \else
+      \chardef\unnlevel = 3
+    \fi
+  \fi
+  % Now print the heading:
+  \if \headtype U%
+    \ifcase\absseclevel
+	\unnumberedzzz{#3}%
+    \or \unnumberedseczzz{#3}%
+    \or \unnumberedsubseczzz{#3}%
+    \or \unnumberedsubsubseczzz{#3}%
+    \fi
+  \else
+    \if \headtype A%
+      \ifcase\absseclevel
+	  \appendixzzz{#3}%
+      \or \appendixsectionzzz{#3}%
+      \or \appendixsubseczzz{#3}%
+      \or \appendixsubsubseczzz{#3}%
+      \fi
+    \else
+      \ifcase\absseclevel
+	  \chapterzzz{#3}%
+      \or \seczzz{#3}%
+      \or \numberedsubseczzz{#3}%
+      \or \numberedsubsubseczzz{#3}%
+      \fi
+    \fi
+  \fi
+  \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v.  By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+  % section resetting is \global in case the chapter is in a group, such
+  % as an @include file.
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\chapno by 1
+  %
+  % Used for \float.
+  \gdef\chaplevelprefix{\the\chapno.}%
+  \resetallfloatnos
+  %
+  % \putwordChapter can contain complex things in translations.
+  \toks0=\expandafter{\putwordChapter}%
+  \message{\the\toks0 \space \the\chapno}%
+  %
+  % Write the actual heading.
+  \chapmacro{#1}{Ynumbered}{\the\chapno}%
+  %
+  % So @section and the like are numbered underneath this chapter.
+  \global\let\section = \numberedsec
+  \global\let\subsection = \numberedsubsec
+  \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
+\def\appendixzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\appendixno by 1
+  \gdef\chaplevelprefix{\appendixletter.}%
+  \resetallfloatnos
+  %
+  % \putwordAppendix can contain complex things in translations.
+  \toks0=\expandafter{\putwordAppendix}%
+  \message{\the\toks0 \space \appendixletter}%
+  %
+  \chapmacro{#1}{Yappendix}{\appendixletter}%
+  %
+  \global\let\section = \appendixsec
+  \global\let\subsection = \appendixsubsec
+  \global\let\subsubsection = \appendixsubsubsec
+}
+
+% normally unnmhead0 calls unnumberedzzz:
+\outer\parseargdef\unnumbered{\unnmhead0{#1}}
+\def\unnumberedzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\unnumberedno by 1
+  %
+  % Since an unnumbered has no number, no prefix for figures.
+  \global\let\chaplevelprefix = \empty
+  \resetallfloatnos
+  %
+  % This used to be simply \message{#1}, but TeX fully expands the
+  % argument to \message.  Therefore, if #1 contained @-commands, TeX
+  % expanded them.  For example, in `@unnumbered The @cite{Book}', TeX
+  % expanded @cite (which turns out to cause errors because \cite is meant
+  % to be executed, not expanded).
+  %
+  % Anyway, we don't want the fully-expanded definition of @cite to appear
+  % as a result of the \message, we just want `@cite' itself.  We use
+  % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+  % simply yielding the contents of <toks register>.  (We also do this for
+  % the toc entries.)
+  \toks0 = {#1}%
+  \message{(\the\toks0)}%
+  %
+  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+  %
+  \global\let\section = \unnumberedsec
+  \global\let\subsection = \unnumberedsubsec
+  \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+  \let\centerparametersmaybe = \centerparameters
+  \unnmhead0{#1}%
+  \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+% 
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+% normally calls appendixsectionzzz:
+\outer\parseargdef\appendixsection{\apphead1{#1}}
+\def\appendixsectionzzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+% normally calls unnumberedseczzz:
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
+\def\unnumberedseczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+% 
+% normally calls numberedsubseczzz:
+\outer\parseargdef\numberedsubsec{\numhead2{#1}}
+\def\numberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+% normally calls appendixsubseczzz:
+\outer\parseargdef\appendixsubsec{\apphead2{#1}}
+\def\appendixsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+% normally calls unnumberedsubseczzz:
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
+\def\unnumberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+% 
+% normally numberedsubsubseczzz:
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
+\def\numberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynumbered}%
+                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally appendixsubsubseczzz:
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
+\def\appendixsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally unnumberedsubsubseczzz:
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
+\def\unnumberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
+% Define @majorheading, @heading and @subheading
+
+\def\majorheading{%
+  {\advance\chapheadingskip by 10pt \chapbreak }%
+  \parsearg\chapheadingzzz
+}
+
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+  \vbox{\chapfonts \raggedtitlesettings #1\par}%
+  \nobreak\bigskip \nobreak
+  \suppressfirstparagraphindent
+}
+
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+
+% These macros generate a chapter, section, etc. heading only
+% (including whitespace, linebreaking, etc. around it),
+% given all the information in convenient, parsed form.
+
+% Args are the skip and penalty (usually negative)
+\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+
+% Parameter controlling skip before chapter headings (if needed)
+\newskip\chapheadingskip
+
+% Define plain chapter starts, and page on/off switching for it.
+\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+
+% Start a new page
+\def\chappager{\par\vfill\supereject}
+
+% \chapoddpage - start on an odd page for a new chapter
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong.  But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+  \chappager
+  \ifodd\pageno \else
+    \begingroup
+      \headingsoff
+      \null
+      \chappager
+    \endgroup
+  \fi
+}
+
+\parseargdef\setchapternewpage{\csname CHAPPAG#1\endcsname}
+
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chapbreak
+\global\let\pagealignmacro=\chappager}
+
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chappager
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
+
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
+\global\let\pchapsepmacro=\chapoddpage
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% \chapmacro - Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+% Not used for @heading series.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yappendixkeyword{Yappendix}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+%
+\def\chapmacro#1#2#3{%
+  \expandafter\ifx\thisenv\titlepage\else
+    \checkenv{}% chapters, etc., should not start inside an environment.
+  \fi
+  % FIXME: \chapmacro is currently called from inside \titlepage when
+  % \setcontentsaftertitlepage to print the "Table of Contents" heading, but
+  % this should probably be done by \sectionheading with an option to print
+  % in chapter size.
+  %
+  % Insert the first mark before the heading break (see notes for \domark).
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+                        \gdef\thissection{}}%
+  %
+  \def\temptype{#2}%
+  \ifx\temptype\Ynothingkeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{\thischaptername}}%
+  \else\ifx\temptype\Yomitfromtockeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{}}%
+  \else\ifx\temptype\Yappendixkeyword
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\appendixletter}%
+      % \noexpand\putwordAppendix avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \else
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\the\chapno}%
+      % \noexpand\putwordChapter avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \fi\fi\fi
+  %
+  % Output the mark.  Pass it through \safewhatsit, to take care of
+  % the preceding space.
+  \safewhatsit\domark
+  %
+  % Insert the chapter heading break.
+  \pchapsepmacro
+  %
+  % Now the second mark, after the heading break.  No break points
+  % between here and the heading.
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \domark
+  %
+  {%
+    \chapfonts \rm
+    \let\footnote=\errfootnoteheading % give better error message
+    %
+    % Have to define \lastsection before calling \donoderef, because the
+    % xref code eventually uses it.  On the other hand, it has to be called
+    % after \pchapsepmacro, or the headline will change too soon.
+    \gdef\lastsection{#1}%
+    %
+    % Only insert the separating space if we have a chapter/appendix
+    % number, and don't print the unnumbered ``number''.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unnchap}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+      \def\toctype{omit}%
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+      \def\toctype{app}%
+    \else
+      \setbox0 = \hbox{#3\enspace}%
+      \def\toctype{numchap}%
+    \fi\fi\fi
+    %
+    % Write the toc entry for this chapter.  Must come before the
+    % \donoderef, because we include the current node name in the toc
+    % entry, and \donoderef resets it to empty.
+    \writetocentry{\toctype}{#1}{#3}%
+    %
+    % For pdftex, we have to write out the node definition (aka, make
+    % the pdfdest) after any page break, but before the actual text has
+    % been typeset.  If the destination for the pdf outline is after the
+    % text, then jumping from the outline may wind up with the text not
+    % being visible, for instance under high magnification.
+    \donoderef{#2}%
+    %
+    % Typeset the actual heading.
+    \nobreak % Avoid page breaks at the interline glue.
+    \vbox{\raggedtitlesettings \hangindent=\wd0 \centerparametersmaybe
+          \unhbox0 #1\par}%
+  }%
+  \nobreak\bigskip % no page break after a chapter title
+  \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+  \advance\rightskip by 3\rightskip
+  \leftskip = \rightskip
+  \parfillskip = 0pt
+}
+
+
+% Section titles.  These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text of the title,
+% #2 is the section level (sec/subsec/subsubsec),
+% #3 is the section type (Ynumbered, Ynothing, Yappendix, Yomitfromtoc),
+% #4 is the section number.
+%
+\def\seckeyword{sec}
+%
+\def\sectionheading#1#2#3#4{%
+  {%
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    % It is ok for the @heading series commands to appear inside an
+    % environment (it's been historically allowed, though the logic is
+    % dubious), but not the others.
+    \ifx\temptype\Yomitfromtockeyword\else
+      \checkenv{}% non-@*heading should not be in an environment.
+    \fi
+    \let\footnote=\errfootnoteheading
+    %
+    % Switch to the right set of fonts.
+    \csname #2fonts\endcsname \rm
+    %
+    % Insert first mark before the heading break (see notes for \domark).
+    \let\prevsectiondefs=\lastsectiondefs
+    \ifx\temptype\Ynothingkeyword
+      \ifx\sectionlevel\seckeyword
+        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+                              \gdef\thissection{\thissectionname}}%
+      \fi
+    \else\ifx\temptype\Yomitfromtockeyword
+      % Don't redefine \thissection.
+    \else\ifx\temptype\Yappendixkeyword
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \else
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \fi\fi\fi
+    %
+    % Go into vertical mode.  Usually we'll already be there, but we
+    % don't want the following whatsit to end up in a preceding paragraph
+    % if the document didn't happen to have a blank line.
+    \par
+    %
+    % Output the mark.  Pass it through \safewhatsit, to take care of
+    % the preceding space.
+    \safewhatsit\domark
+    %
+    % Insert space above the heading.
+    \csname #2headingbreak\endcsname
+    %
+    % Now the second mark, after the heading break.  No break points
+    % between here and the heading.
+    \global\let\prevsectiondefs=\lastsectiondefs
+    \domark
+    %
+    % Only insert the space after the number if we have a section number.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unn}%
+      \gdef\lastsection{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      % for @headings -- no section number, don't include in toc,
+      % and don't redefine \lastsection.
+      \setbox0 = \hbox{}%
+      \def\toctype{omit}%
+      \let\sectionlevel=\empty
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{app}%
+      \gdef\lastsection{#1}%
+    \else
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{num}%
+      \gdef\lastsection{#1}%
+    \fi\fi\fi
+    %
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
+    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    %
+    % Write the node reference (= pdf destination for pdftex).
+    % Again, see comments in \chapmacro.
+    \donoderef{#3}%
+    %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
+    % Output the actual section heading.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
+          \hangindent=\wd0  % zero if no section number
+          \unhbox0 #1}%
+  }%
+  % Add extra space after the heading -- half of whatever came above it.
+  % Don't allow stretch, though.
+  \kern .5 \csname #2headingskip\endcsname
+  %
+  % Do not let the kern be a potential breakpoint, as it would be if it
+  % was followed by glue.
+  \nobreak
+  %
+  % We'll almost certainly start a paragraph next, so don't let that
+  % glue accumulate.  (Not a breakpoint because it's preceded by a
+  % discardable item.)  However, when a paragraph is not started next
+  % (\startdefun, \cartouche, \center, etc.), this needs to be wiped out
+  % or the negative glue will cause weirdly wrong output, typically
+  % obscuring the section heading with something else.
+  \vskip-\parskip
+  %
+  % This is so the last item on the main vertical list is a known
+  % \penalty > 10000, so \startdefun, etc., can recognize the situation
+  % and do the needful.
+  \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this.  The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything.  This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+  \edef\writetoctype{#1}%
+  \ifx\writetoctype\omitkeyword \else
+    \iftocfileopened\else
+      \immediate\openout\tocfile = \jobname.toc
+      \global\tocfileopenedtrue
+    \fi
+    %
+    \iflinks
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }%
+    \fi
+  \fi
+  %
+  % Tell \shipout to create a pdf destination on each page, if we're
+  % writing pdf.  These are used in the table of contents.  We can't
+  % just write one on every page because the title pages are numbered
+  % 1 and 2 (the page numbers aren't printed), and so are the first
+  % two pages of the document.  Thus, we'd have two destinations named
+  % `1', and two named `2'.
+  \ifpdf
+    \global\pdfmakepagedesttrue
+  \else
+    \ifx\XeTeXrevision\thisisundefined
+    \else
+      \global\pdfmakepagedesttrue
+    \fi
+  \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \tocreadfilename
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+  % If @setchapternewpage on, and @headings double, the contents should
+  % start on an odd page, unlike chapters.  Thus, we maintain
+  % \contentsalignmacro in parallel with \pagealignmacro.
+  % From: Torbjorn Granlund <tege@matematik.su.se>
+  \contentsalignmacro
+  \immediate\closeout\tocfile
+  %
+  % Don't need to put `Contents' or `Short Contents' in the headline.
+  % It is abundantly clear what they are.
+  \chapmacro{#1}{Yomitfromtoc}{}%
+  %
+  \savepageno = \pageno
+  \begingroup                  % Set up to handle contents files properly.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
+    \entryrightmargin=\contentsrightmargin % Don't use the full line length.
+    %
+    % Roman numerals for page numbers.
+    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+% redefined for the two-volume lispref.  We always output on
+% \jobname.toc even if this is redefined.
+%
+\def\tocreadfilename{\jobname.toc}
+
+% Normal (long) toc.
+%
+\def\contents{%
+  \startcontents{\putwordTOC}%
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+    \ifeof 1 \else
+      \pdfmakeoutlines
+    \fi
+    \closein 1
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+  \startcontents{\putwordShortTOC}%
+    %
+    \let\partentry = \shortpartentry
+    \let\numchapentry = \shortchapentry
+    \let\appentry = \shortchapentry
+    \let\unnchapentry = \shortunnchapentry
+    % We want a true roman here for the page numbers.
+    \secfonts
+    \let\rm=\shortcontrm \let\bf=\shortcontbf
+    \let\sl=\shortcontsl \let\tt=\shortconttt
+    \rm
+    \hyphenpenalty = 10000
+    \advance\baselineskip by 1pt % Open it up a little.
+    \def\numsecentry##1##2##3##4{}
+    \let\appsecentry = \numsecentry
+    \let\unnsecentry = \numsecentry
+    \let\numsubsecentry = \numsecentry
+    \let\appsubsecentry = \numsecentry
+    \let\unnsubsecentry = \numsecentry
+    \let\numsubsubsecentry = \numsecentry
+    \let\appsubsubsecentry = \numsecentry
+    \let\unnsubsubsecentry = \numsecentry
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \closein 1
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  %
+  % We'd like to right-justify chapter numbers, but that looks strange
+  % with appendix letters.  And right-justifying numbers and
+  % left-justifying letters looks strange when there is less than 10
+  % chapters.  Have to read the whole toc once to know how many chapters
+  % there are before deciding ...
+  \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Parts, in the main contents.  Replace the part number, which doesn't
+% exist, with an empty box.  Let's hope all the numbers have the same width.
+% Also ignore the page number, which is conventionally not printed.
+\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
+\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+%
+% Parts, in the short toc.
+\def\shortpartentry#1#2#3#4{%
+  \penalty-300
+  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
+  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
+}
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+  % We use M since it's probably the widest letter.
+  \setbox0 = \hbox{\putwordAppendix{} M}%
+  \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\hskip.7em#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+   \begingroup
+     % Move the page numbers slightly to the right
+     \advance\entryrightmargin by -0.05em
+     \chapentryfonts
+     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+   \endgroup
+   \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+  \secentryfonts \leftskip=\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+  \subsecentryfonts \leftskip=2\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+  \subsubsecentryfonts \leftskip=3\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @tex ... @end tex    escapes into raw TeX temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain @ character.
+
+\envdef\tex{%
+  \setupmarkupstyle{tex}%
+  \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+  \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+  \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+  \catcode `\%=14
+  \catcode `\+=\other
+  \catcode `\"=\other
+  \catcode `\|=\other
+  \catcode `\<=\other
+  \catcode `\>=\other
+  \catcode `\`=\other
+  \catcode `\'=\other
+  %
+  % ' is active in math mode (mathcode"8000).  So reset it, and all our
+  % other math active characters (just in case), to plain's definitions.
+  \mathactive
+  %
+  % Inverse of the list at the beginning of the file.
+  \let\b=\ptexb
+  \let\bullet=\ptexbullet
+  \let\c=\ptexc
+  \let\,=\ptexcomma
+  \let\.=\ptexdot
+  \let\dots=\ptexdots
+  \let\equiv=\ptexequiv
+  \let\!=\ptexexclam
+  \let\i=\ptexi
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \let\{=\ptexlbrace
+  \let\+=\tabalign
+  \let\}=\ptexrbrace
+  \let\/=\ptexslash
+  \let\sp=\ptexsp
+  \let\*=\ptexstar
+  %\let\sup=\ptexsup % do not redefine, we want @sup to work in math mode
+  \let\t=\ptext
+  \expandafter \let\csname top\endcsname=\ptextop  % we've made it outer
+  \let\frenchspacing=\plainfrenchspacing
+  %
+  \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+  \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+  \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments.  \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical.  We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      \ifnum\lastpenalty<10000
+        % Penalize breaking before the environment, because preceding text
+        % often leads into it.
+        \penalty100
+      \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+\def\afterenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      % it's not a good place to break if the last penalty was \nobreak
+      % or better ...
+      \ifnum\lastpenalty<10000 \penalty-50 \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
+
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+        \ctl\leaders\hrule height\circthick\hfil\ctr
+        \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+        \cbl\leaders\hrule height\circthick\hfil\cbr
+        \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+  \ifhmode\par\fi  % can't be in the midst of a paragraph.
+  \startsavinginserts
+  \lskip=\leftskip \rskip=\rightskip
+  \leftskip=0pt\rightskip=0pt % we want these *outside*.
+  \cartinner=\hsize \advance\cartinner by-\lskip
+  \advance\cartinner by-\rskip
+  \cartouter=\hsize
+  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
+				% side, and for 6pt waste from
+				% each corner char, and rule thickness
+  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+  %
+  % If this cartouche directly follows a sectioning command, we need the
+  % \parskip glue (backspaced over by default) or the cartouche can
+  % collide with the section heading.
+  \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
+  %
+  \setbox\groupbox=\vbox\bgroup
+      \baselineskip=0pt\parskip=0pt\lineskip=0pt
+      \carttop
+      \hbox\bgroup
+	  \hskip\lskip
+	  \vrule\kern3pt
+	  \vbox\bgroup
+	      \kern3pt
+	      \hsize=\cartinner
+	      \baselineskip=\normbskip
+	      \lineskip=\normlskip
+	      \parskip=\normpskip
+	      \vskip -\parskip
+	      \comment % For explanation, see the end of def\group.
+}
+\def\Ecartouche{%
+              \ifhmode\par\fi
+	      \kern3pt
+	  \egroup
+	  \kern3pt\vrule
+	  \hskip\rskip
+      \egroup
+      \cartbot
+  \egroup
+  \addgroupbox
+  \checkinserts
+}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\newdimen\nonfillparindent
+\def\nonfillstart{%
+  \aboveenvbreak
+  \ifdim\hfuzz < 12pt \hfuzz = 12pt \fi % Don't be fussy
+  \sepspaces % Make spaces be word-separators rather than space tokens.
+  \let\par = \lisppar % don't ignore blank lines
+  \obeylines % each line of input is a line of output
+  \parskip = 0pt
+  % Turn off paragraph indentation but redefine \indent to emulate
+  % the normal \indent.
+  \nonfillparindent=\parindent
+  \parindent = 0pt
+  \let\indent\nonfillindent
+  %
+  \emergencystretch = 0pt % don't try to avoid overfull boxes
+  \ifx\nonarrowing\relax
+    \advance \leftskip by \lispnarrowing
+    \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \let\exdent=\nofillexdent
+}
+
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+%    @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+  \ifx\SETdispenvsize\smallword
+    % end paragraph for sake of leading, in case document has no blank
+    % line.  This is redundant with what happens in \aboveenvbreak, but
+    % we need to do it before changing the fonts, and it's inconvenient
+    % to change the fonts afterward.
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+\def\setsmalldispenv{%
+  \ifx\SETdispenvsize\nosmallword
+  \else
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it in one command.  #1 is the env name, #2 the definition.
+\def\makedispenvdef#1#2{%
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
+  \expandafter\let\csname E#1\endcsname \afterenvbreak
+  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% Define two environment synonyms (#1 and #2) for an environment.
+\def\maketwodispenvdef#1#2#3{%
+  \makedispenvdef{#1}{#3}%
+  \makedispenvdef{#2}{#3}%
+}
+%
+% @lisp: indented, narrowed, typewriter font;
+% @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvdef{lisp}{example}{%
+  \nonfillstart
+  \tt\setupmarkupstyle{example}%
+  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+  \gobble % eat return
+}
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenvdef{display}{%
+  \nonfillstart
+  \gobble
+}
+
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenvdef{format}{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+\let\Eflushleft = \afterenvbreak
+
+% @flushright.
+%
+\envdef\flushright{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \advance\leftskip by 0pt plus 1fill\relax
+  \gobble
+}
+\let\Eflushright = \afterenvbreak
+
+
+% @raggedright does more-or-less normal line breaking but no right
+% justification.  From plain.tex.  Don't stretch around special
+% characters in urls in this environment, since the stretch at the right
+% should be enough.
+\envdef\raggedright{%
+  \rightskip0pt plus2.4em \spaceskip.3333em \xspaceskip.5em\relax
+  \def\urefprestretchamount{0pt}%
+  \def\urefpoststretchamount{0pt}%
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+  \parindent=0pt \leftskip0pt plus2em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins.  We keep \parskip nonzero in general, since
+% we're doing normal filling.  So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\makedispenvdef{quotation}{\quotationstart}
+%
+\def\quotationstart{%
+  \indentedblockstart % same as \indentedblock, but increase right margin too.
+  \ifx\nonarrowing\relax
+    \advance\rightskip by \lispnarrowing
+  \fi
+  \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+  \par
+  \ifx\quotationauthor\thisisundefined\else
+    % indent a bit.
+    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+  \fi
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallquotation{\Equotation}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty \else
+    {\bf #1: }%
+  \fi
+}
+
+% @indentedblock is like @quotation, but indents only on the left and
+% has no optional argument.
+% 
+\makedispenvdef{indentedblock}{\indentedblockstart}
+%
+\def\indentedblockstart{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+}
+
+% Keep a nonzero parskip for the environment, since we're doing normal filling.
+%
+\def\Eindentedblock{%
+  \par
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallindentedblock{\Eindentedblock}
+
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command.  --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996.  The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too.  Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+  \do\ \do\\\do\{\do\}\do\$\do\&%
+  \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+  \do\<\do\>\do\|\do\@\do+\do\"%
+  % Don't do the quotes -- if we do, @set txicodequoteundirected and
+  % @set txicodequotebacktick will not have effect on @verb and
+  % @verbatim, and ?` and !` ligatures won't get disabled.
+  %\do\`\do\'%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+  \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+  \tt  % easiest (and conventionally used) font for verbatim
+  \def\par{\leavevmode\endgraf}%
+  \setupmarkupstyle{verb}%
+  \tabeightspaces
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count
+  % must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion.
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+% We typeset each line of the verbatim in an \hbox, so we can handle
+% tabs.  The \global is in case the verbatim line starts with an accent,
+% or some other command that starts with a begin-group.  Otherwise, the
+% entire \verbbox would disappear at the corresponding end-group, before
+% it is typeset.  Meanwhile, we can't have nested verbatim commands
+% (can we?), so the \global won't be overwriting itself.
+\newbox\verbbox
+\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
+%
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabexpand{%
+    \catcode`\^^I=\active
+    \def^^I{\leavevmode\egroup
+      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
+      \divide\dimen\verbbox by\tabw
+      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
+      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
+      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
+    }%
+  }
+\endgroup
+
+% start the verbatim environment.
+\def\setupverbatim{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \tt % easiest (and conventionally used) font for verbatim
+  % The \leavevmode here is for blank lines.  Otherwise, we would
+  % never \starttabox and the \egroup would end verbatim mode.
+  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
+  \tabexpand
+  \setupmarkupstyle{verbatim}%
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count.
+  % Must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+  \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters.  Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+%    \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+  \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+%     \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+  \catcode`\ =\active
+  \obeylines %
+  % ignore everything up to the first ^^M, that's the newline at the end
+  % of the @verbatim input line itself.  Otherwise we get an extra blank
+  % line in the output.
+  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+  % We really want {...\end verbatim} in the body of the macro, but
+  % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+    \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
+
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+  {%
+    \makevalueexpandable
+    \setupverbatim
+    \indexnofonts       % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
+    \input #1
+    \afterenvbreak
+  }%
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+  \begingroup
+    \parindent = 0pt  % paragraph indentation looks wrong on title page
+    \scanexp\copyingtext
+  \endgroup
+}
+
+
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
+\newcount\defunpenalty
+
+% Start the processing of @deffn:
+\def\startdefun{%
+  \ifnum\lastpenalty<10000
+    \medbreak
+    \defunpenalty=10003 % Will keep this @deffn together with the
+                        % following @def command, see below.
+  \else
+    % If there are two @def commands in a row, we'll have a \nobreak,
+    % which is there to keep the function description together with its
+    % header.  But if there's nothing but headers, we need to allow a
+    % break somewhere.  Check specifically for penalty 10002, inserted
+    % by \printdefunline, instead of 10000, since the sectioning
+    % commands also insert a nobreak penalty, and we don't want to allow
+    % a break between a section heading and a defun.
+    %
+    % As a further refinement, we avoid "club" headers by signalling
+    % with penalty of 10003 after the very first @deffn in the
+    % sequence (see above), and penalty of 10002 after any following
+    % @def command.
+    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
+    %
+    % Similarly, after a section heading, do not allow a break.
+    % But do insert the glue.
+    \medskip  % preceded by discardable penalty, so not a breakpoint
+  \fi
+  %
+  \parindent=0in
+  \advance\leftskip by \defbodyindent
+  \exdentamount=\defbodyindent
+}
+
+\def\dodefunx#1{%
+  % First, check whether we are in the right environment:
+  \checkenv#1%
+  %
+  % As above, allow line break if we have multiple x headers in a row.
+  % It's not a great place, though.
+  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
+  %
+  % And now, it's time to reuse the body of the original defun:
+  \expandafter\gobbledefun#1%
+}
+\def\gobbledefun#1\startdefun{}
+
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+  \begingroup
+    % call \deffnheader:
+    #1#2 \endheader
+    % common ending:
+    \interlinepenalty = 10000
+    \advance\rightskip by 0pt plus 1fil\relax
+    \endgraf
+    \nobreak\vskip -\parskip
+    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
+    % Some of the @defun-type tags do not enable magic parentheses,
+    % rendering the following check redundant.  But we don't optimize.
+    \checkparencounts
+  \endgroup
+}
+
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remaining is to define \deffnheader.
+%
+\def\makedefun#1{%
+  \expandafter\let\csname E#1\endcsname = \Edefun
+  \edef\temp{\noexpand\domakedefun
+    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+  \temp
+}
+
+% \domakedefun \deffn \deffnx \deffnheader { (defn. of \deffnheader) }
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+  \envdef#1{%
+    \startdefun
+    \doingtypefnfalse    % distinguish typed functions from all else
+    \parseargusing\activeparens{\printdefunline#3}%
+  }%
+  \def#2{\dodefunx#1}%
+  \def#3%
+}
+
+\newif\ifdoingtypefn       % doing typed function?
+\newif\ifrettypeownline    % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line.  This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+% 
+\parseargdef\deftypefnnewline{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @txideftypefnnl value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% Untyped functions:
+
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
+
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+  % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+  \dosubind{fn}{\code{#3}}{#1}%
+  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
+
+% Typed functions:
+
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{fn}{\code{#4}}{#1}%
+  \doingtypefntrue
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Typed variables:
+
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
+
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{vr}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Untyped variables:
+
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+
+% Types:
+
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+  \doind{tp}{\code{#2}}%
+  \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
+
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+  \par
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \advance\leftskip by -\defbodyindent
+  %
+  % Determine if we are typesetting the return type of a typed function
+  % on a line by itself.
+  \rettypeownlinefalse
+  \ifdoingtypefn  % doing a typed function specifically?
+    % then check user option for putting return type on its own line:
+    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+      \rettypeownlinetrue
+    \fi
+  \fi
+  %
+  % How we'll format the category name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \def\temp{#1}%
+  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+  %
+  % Figure out line sizes for the paragraph shape.  We'll always have at
+  % least two.
+  \tempnum = 2
+  %
+  % The first line needs space for \box0; but if \rightskip is nonzero,
+  % we need only space for the part of \box0 which exceeds it:
+  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  %
+  % If doing a return type on its own line, we'll have another line.
+  \ifrettypeownline
+    \advance\tempnum by 1
+    \def\maybeshapeline{0in \hsize}%
+  \else
+    \def\maybeshapeline{}%
+  \fi
+  %
+  % The continuations:
+  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
+  %
+  % The final paragraph shape:
+  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
+  %
+  % Put the category name at the right margin.
+  \noindent
+  \hbox to 0pt{%
+    \hfil\box0 \kern-\hsize
+    % \hsize has to be shortened this way:
+    \kern\leftskip
+    % Intentionally do not respect \rightskip, since we need the space.
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \exdentamount=\defbodyindent
+  {%
+    % defun fonts. We use typewriter by default (used to be bold) because:
+    % . we're printing identifiers, they should be in tt in principle.
+    % . in languages with many accents, such as Czech or French, it's
+    %   common to leave accents off identifiers.  The result looks ok in
+    %   tt, but exceedingly strange in rm.
+    % . we don't want -- and --- to be treated as ligatures.
+    % . this still does not fix the ?` and !` ligatures, but so far no
+    %   one has made identifiers using them :).
+    \df \tt
+    \def\temp{#2}% text of the return type
+    \ifx\temp\empty\else
+      \tclose{\temp}% typeset the return type
+      \ifrettypeownline
+        % put return type on its own line; prohibit line break following:
+        \hfil\vadjust{\nobreak}\break  
+      \else
+        \space  % type on same line, so just followed by a space
+      \fi
+    \fi           % no return type
+    #3% output function name
+  }%
+  {\rm\enskip}% hskip 0.5 em of \rmfont
+  %
+  \boldbrax
+  % arguments will be output next, if any.
+}
+
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name.  This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable.  Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+  % use sl by default (not ttsl),
+  % tt for the names.
+  \df \sl \hyphenchar\font=0
+  %
+  % On the other hand, if an argument has two dashes (for instance), we
+  % want a way to get ttsl.  We used to recommend @var for that, so
+  % leave the code in, but it's strange for @var to lead to typewriter.
+  % Nowadays we recommend @code, since the difference between a ttsl hyphen
+  % and a tt hyphen is pretty tiny.  @code also disables ?` !`.
+  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
+  #1%
+  \sl\hyphenchar\font=45
+}
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\[=\active \catcode`\]=\active
+  \catcode`\&=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+  \activeparens
+  \global\let(=\lparen \global\let)=\rparen
+  \global\let[=\lbrack \global\let]=\rbrack
+  \global\let& = \&
+
+  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+  \gdef\magicamp{\let&=\amprm}
+}
+
+\newcount\parencount
+
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\&#1 }}
+
+\def\parenfont{%
+  \ifampseen
+    % At the first level, print parens in roman,
+    % otherwise use the default font.
+    \ifnum \parencount=1 \rm \fi
+  \else
+    % The \sf parens (in \boldbrax) actually are a little bolder than
+    % the contained text.  This is especially needed for [ and ] .
+    \sf
+  \fi
+}
+\def\infirstlevel#1{%
+  \ifampseen
+    \ifnum\parencount=1
+      #1%
+    \fi
+  \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+  \global\advance\parencount by 1
+  {\parenfont(}%
+  \infirstlevel \bfafterword
+}
+\def\clnr{%
+  {\parenfont)}%
+  \infirstlevel \sl
+  \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+  \global\advance\brackcount by 1
+  {\bf[}%
+}
+\def\rbrb{%
+  {\bf]}%
+  \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+  \ifnum\parencount=0 \else \badparencount \fi
+  \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+% these should not use \errmessage; the glibc manual, at least, actually
+% has such constructs (when documenting function pointers).
+\def\badparencount{%
+  \message{Warning: unbalanced parentheses in @def...}%
+  \global\parencount=0
+}
+\def\badbrackcount{%
+  \message{Warning: unbalanced square brackets in @def...}%
+  \global\brackcount=0
+}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\thisisundefined
+  \newwrite\macscribble
+  \def\scantokens#1{%
+    \toks0={#1}%
+    \immediate\openout\macscribble=\jobname.tmp
+    \immediate\write\macscribble{\the\toks0}%
+    \immediate\closeout\macscribble
+    \input \jobname.tmp
+  }
+\fi
+
+\let\aftermacroxxx\relax
+\def\aftermacro{\aftermacroxxx}
+
+% alias because \c means cedilla in @tex or @math
+\let\texinfoc=\c
+
+\newcount\savedcatcodeone
+\newcount\savedcatcodetwo
+
+% Used at the time of macro expansion.
+% Argument is macro body with arguments substituted
+\def\scanmacro#1{%
+  \newlinechar`\^^M
+  \def\xeatspaces{\eatspaces}%
+  %
+  % Temporarily undo catcode changes of \printindex.  Set catcode of @ to
+  % 0 so that @-commands in macro expansions aren't printed literally when 
+  % formatting an index file, where \ is used as the escape character.
+  \savedcatcodeone=\catcode`\@
+  \savedcatcodetwo=\catcode`\\
+  \catcode`\@=0
+  \catcode`\\=\active
+  %
+  % Process the macro body under the current catcode regime.
+  \scantokens{#1@texinfoc}\aftermacro%
+  %
+  \catcode`\@=\savedcatcodeone
+  \catcode`\\=\savedcatcodetwo
+  %
+  % The \texinfoc is to remove the \newlinechar added by \scantokens, and
+  % can be noticed by \parsearg.
+  %   The \aftermacro allows a \comment at the end of the macro definition
+  % to duplicate itself past the final \newlinechar added by \scantokens:
+  % this is used in the definition of \group to comment out a newline.  We
+  % don't do the same for \c to support Texinfo files with macros that ended
+  % with a @c, which should no longer be necessary.
+  %   We avoid surrounding the call to \scantokens with \bgroup and \egroup
+  % to allow macros to open or close groups themselves.
+}
+
+% Used for copying and captions
+\def\scanexp#1{%
+  \expandafter\scanmacro\expandafter{#1}%
+}
+
+\newcount\paramno   % Count of parameters
+\newtoks\macname    % Macro name
+\newif\ifrecursive  % Is it recursive?
+
+% List of all defined macros in the form
+%    \commondummyword\macro1\commondummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\commondummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
+
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
+\def\cslet#1#2{%
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \
+% to recognize macro arguments; this is the job of \mbodybackslash.
+%
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion.  Must do this non-globally, to
+% confine the change to the current group.
+%
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+%
+\def\scanctxt{% used as subroutine
+  \catcode`\"=\other
+  \catcode`\+=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\~=\other
+  \passthroughcharstrue
+}
+
+\def\scanargctxt{% used for copying and captions, not macros.
+  \scanctxt
+  \catcode`\@=\other
+  \catcode`\\=\other
+  \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{% used for @macro definitions
+  \scanctxt
+  \catcode`\ =\other
+  \catcode`\@=\other
+  \catcode`\{=\other
+  \catcode`\}=\other
+  \catcode`\^^M=\other
+  \usembodybackslash
+}
+
+% Used when scanning braced macro arguments.  Note, however, that catcode
+% changes here are ineffectual if the macro invocation was nested inside
+% an argument to another Texinfo command.
+\def\macroargctxt{%
+  \scanctxt
+  \catcode`\ =\active
+  \catcode`\^^M=\other
+  \catcode`\\=\active
+}
+
+\def\macrolineargctxt{% used for whole-line arguments without braces
+  \scanctxt
+  \catcode`\{=\other
+  \catcode`\}=\other
+}
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+%
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\margbackslash#1{\char`\#1 }
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+  \getargs{#1}% now \macname is the macname and \argl the arglist
+  \ifx\argl\empty       % no arguments
+     \paramno=0\relax
+  \else
+     \expandafter\parsemargdef \argl;%
+     \if\paramno>256\relax
+       \ifx\eTeXversion\thisisundefined
+         \errhelp = \EMsimple
+         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+       \fi
+     \fi
+  \fi
+  \if1\csname ismacro.\the\macname\endcsname
+     \message{Warning: redefining \the\macname}%
+  \else
+     \expandafter\ifx\csname \the\macname\endcsname \relax
+     \else \errmessage{Macro name \the\macname\space already defined}\fi
+     \global\cslet{macsave.\the\macname}{\the\macname}%
+     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+     \addtomacrolist{\the\macname}%
+  \fi
+  \begingroup \macrobodyctxt
+  \ifrecursive \expandafter\parsermacbody
+  \else \expandafter\parsemacbody
+  \fi}
+
+\parseargdef\unmacro{%
+  \if1\csname ismacro.#1\endcsname
+    \global\cslet{#1}{macsave.#1}%
+    \global\expandafter\let \csname ismacro.#1\endcsname=0%
+    % Remove the macro name from \macrolist:
+    \begingroup
+      \expandafter\let\csname#1\endcsname \relax
+      \let\commondummyword\unmacrodo
+      \xdef\macrolist{\macrolist}%
+    \endgroup
+  \else
+    \errmessage{Macro #1 not defined}%
+  \fi
+}
+
+% Called by \do from \dounmacro on each macro.  The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+  \ifx #1\relax
+    % remove this
+  \else
+    \noexpand\commondummyword \noexpand#1%
+  \fi
+}
+
+% \getargs -- Parse the arguments to a @macro line.  Set \macname to
+% the name of the macro, and \argl to the braced argument list.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname#1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+% This made use of the feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+
+% Parse the optional {params} list to @macro or @rmacro.
+% Set \paramno to the number of arguments,
+% and \paramlist to a parameter text for the macro (e.g. #1,#2,#3 for a
+% three-param macro.)  Define \macarg.BLAH for each BLAH in the params
+% list to some hook where the argument is to be expanded.  If there are
+% less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.  
+%
+% That gets used by \mbodybackslash (above).
+%
+% If there are 10 or more arguments, a different technique is used: see
+% \parsemmanyargdef.
+%
+\def\parsemargdef#1;{%
+  \paramno=0\def\paramlist{}%
+  \let\hash\relax
+  % \hash is redefined to `#' later to get it into definitions
+  \let\xeatspaces\relax
+  \parsemargdefxxx#1,;,%
+  \ifnum\paramno<10\relax\else
+    \paramno0\relax
+    \parsemmanyargdef@@#1,;,% 10 or more arguments
+  \fi
+}
+\def\parsemargdefxxx#1,{%
+  \if#1;\let\next=\relax
+  \else \let\next=\parsemargdefxxx
+    \advance\paramno by 1
+    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+        {\xeatspaces{\hash\the\paramno}}%
+    \edef\paramlist{\paramlist\hash\the\paramno,}%
+  \fi\next}
+
+% \parsemacbody, \parsermacbody
+%
+% Read recursive and nonrecursive macro bodies. (They're different since
+% rec and nonrec macros end differently.)
+% 
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro 
+% body to be transformed.
+% Set \macrobody to the body of the macro, and call \defmacro.
+%
+{\catcode`\ =\other\long\gdef\parsemacbody#1@end macro{%
+\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
+{\catcode`\ =\other\long\gdef\parsermacbody#1@end rmacro{%
+\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
+
+% Make @ a letter, so that we can make private-to-Texinfo macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
+
+%%%%%%%%%%%%%% Code for > 10 arguments only   %%%%%%%%%%%%%%%%%%
+
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef the body (nothing else will expand because of
+% the catcode regime under which the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, no macro can have more than 256 arguments (else error).
+%
+% In case that there are 10 or more arguments we parse again the arguments
+% list to set new definitions for the \macarg.BLAH macros corresponding to
+% each BLAH argument. It was anyhow needed to parse already once this list
+% in order to count the arguments, and as macros with at most 9 arguments
+% are by far more frequent than macro with 10 or more arguments, defining
+% twice the \macarg.BLAH macros does not cost too much processing power.
+\def\parsemmanyargdef@@#1,{%
+  \if#1;\let\next=\relax
+  \else 
+    \let\next=\parsemmanyargdef@@
+    \edef\tempb{\eatspaces{#1}}%
+    \expandafter\def\expandafter\tempa
+       \expandafter{\csname macarg.\tempb\endcsname}%
+    % Note that we need some extra \noexpand\noexpand, this is because we
+    % don't want \the  to be expanded in the \parsermacbody  as it uses an
+    % \xdef .
+    \expandafter\edef\tempa
+      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+    \advance\paramno by 1\relax
+  \fi\next}
+
+
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition.  It gets all the arguments' values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+  \def\macargdeflist@{}%
+  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+  \def\paramlist{#2,\nil@}%
+  \def\macroname{#1}%
+  \begingroup
+  \macroargctxt
+  \def\argvaluelist{#3,\nil@}%
+  \def\@tempa{#3}%
+  \ifx\@tempa\empty
+    \setemptyargvalues@
+  \else
+    \getargvals@@
+  \fi
+}
+\def\getargvals@@{%
+  \ifx\paramlist\nilm@
+      % Some sanity check needed here that \argvaluelist is also empty.
+      \ifx\argvaluelist\nillm@
+      \else
+        \errhelp = \EMsimple
+        \errmessage{Too many arguments in macro `\macroname'!}%
+      \fi
+      \let\next\macargexpandinbody@
+  \else
+    \ifx\argvaluelist\nillm@
+       % No more arguments values passed to macro.  Set remaining named-arg
+       % macros to empty.
+       \let\next\setemptyargvalues@
+    \else
+      % pop current arg name into \@tempb
+      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\paramlist}%
+       % pop current argument value into \@tempc
+      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\argvaluelist}%
+       % Here \@tempb is the current arg name and \@tempc is the current arg value.
+       % First place the new argument macro definition into \@tempd
+       \expandafter\macname\expandafter{\@tempc}%
+       \expandafter\let\csname macarg.\@tempb\endcsname\relax
+       \expandafter\def\expandafter\@tempe\expandafter{%
+         \csname macarg.\@tempb\endcsname}%
+       \edef\@tempd{\long\def\@tempe{\the\macname}}%
+       \push@\@tempd\macargdeflist@
+       \let\next\getargvals@@
+    \fi
+  \fi
+  \next
+}
+
+\def\push@#1#2{%
+  \expandafter\expandafter\expandafter\def
+  \expandafter\expandafter\expandafter#2%
+  \expandafter\expandafter\expandafter{%
+  \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa.
+% 
+\def\macvalstoargs@{%
+  %  To do this we use the property that token registers that are \the'ed
+  % within an \edef  expand only once. So we are going to place all argument
+  % values into respective token registers.
+  %
+  % First we save the token context, and initialize argument numbering.
+  \begingroup
+    \paramno0\relax
+    % Then, for each argument number #N, we place the corresponding argument
+    % value into a new token list register \toks#N
+    \expandafter\putargsintokens@\saveparamlist@,;,%
+    % Then, we expand the body so that argument are replaced by their
+    % values. The trick for values not to be expanded themselves is that they
+    % are within tokens and that tokens expand only once in an \edef .
+    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+    % Now we restore the token stack pointer to free the token list registers
+    % which we have used, but we make sure that expanded body is saved after
+    % group.
+    \expandafter
+  \endgroup
+  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+  }
+
+% Define the named-macro outside of this group and then close this group. 
+% 
+\def\macargexpandinbody@{% 
+  \expandafter
+  \endgroup
+  \macargdeflist@
+  % First the replace in body the macro arguments by their values, the result
+  % is in \@tempa .
+  \macvalstoargs@
+  % Then we point at the \norecurse or \gobble (for recursive) macro value
+  % with \@tempb .
+  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+  % Depending on whether it is recursive or not, we need some tailing
+  % \egroup .
+  \ifx\@tempb\gobble
+     \let\@tempc\relax
+  \else
+     \let\@tempc\egroup
+  \fi
+  % And now we do the real job:
+  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+  \@tempd
+}
+
+\def\putargsintokens@#1,{%
+  \if#1;\let\next\relax
+  \else
+    \let\next\putargsintokens@
+    % First we allocate the new token list register, and give it a temporary
+    % alias \@tempb .
+    \toksdef\@tempb\the\paramno
+    % Then we place the argument value into that token list register.
+    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+    \expandafter\@tempb\expandafter{\@tempa}%
+    \advance\paramno by 1\relax
+  \fi
+  \next
+}
+
+% Trailing missing arguments are set to empty.
+% 
+\def\setemptyargvalues@{%
+  \ifx\paramlist\nilm@
+    \let\next\macargexpandinbody@
+  \else
+    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+    \let\next\setemptyargvalues@
+  \fi
+  \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+  \expandafter\def\expandafter\@tempa\expandafter{%
+    \expandafter\def\csname macarg.#1\endcsname{}}%
+  \push@\@tempa\macargdeflist@
+  \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+   \def#1{#3}%
+   \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+   \long\def#1{#3}%
+   \long\def#2{#4}%
+}
+
+
+%%%%%%%%%%%%%% End of code for > 10 arguments %%%%%%%%%%%%%%%%%%
+
+
+% This defines a Texinfo @macro or @rmacro, called by \parsemacbody.
+%    \macrobody has the body of the macro in it, with placeholders for
+% its parameters, looking like "\xeatspaces{\hash 1}".
+%    \paramno is the number of parameters
+%    \paramlist is a TeX parameter text, e.g. "#1,#2,#3,"
+% There are four cases: macros of zero, one, up to nine, and many arguments.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in: @include reads the file inside a group.
+%
+\def\defmacro{%
+  \let\hash=##% convert placeholders to macro parameter chars
+  \ifnum\paramno=1
+    \def\xeatspaces##1{##1}%
+    % This removes the pair of braces around the argument.  We don't
+    % use \eatspaces, because this can cause ends of lines to be lost
+    % when the argument to \eatspaces is read, leading to line-based
+    % commands like "@itemize" not being read correctly.
+  \else
+    \let\xeatspaces\relax % suppress expansion
+  \fi
+  \ifcase\paramno
+  % 0
+    \expandafter\xdef\csname\the\macname\endcsname{%
+      \noexpand\scanmacro{\macrobody}}%
+  \or % 1
+    \expandafter\xdef\csname\the\macname\endcsname{%
+       \bgroup
+       \noexpand\braceorline
+       \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+    \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+      \egroup
+      \noexpand\scanmacro{\macrobody}%
+      }%
+  \else % at most 9
+    \ifnum\paramno<10\relax
+      % @MACNAME sets the context for reading the macro argument
+      % @MACNAME@@ gets the argument, processes backslashes and appends a 
+      % comma.
+      % @MACNAME@@@ removes braces surrounding the argument list.
+      % @MACNAME@@@@ scans the macro body with arguments substituted.
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \bgroup
+        \noexpand\expandafter  % This \expandafter skip any spaces after the
+        \noexpand\macroargctxt % macro before we change the catcode of space.
+        \noexpand\expandafter
+        \expandafter\noexpand\csname\the\macname @@\endcsname}%
+      \expandafter\xdef\csname\the\macname @@\endcsname##1{%
+          \noexpand\passargtomacro
+          \expandafter\noexpand\csname\the\macname @@@\endcsname{##1,}}%
+      \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+          \expandafter\noexpand\csname\the\macname @@@@\endcsname ##1}%
+      \expandafter\expandafter
+      \expandafter\xdef
+      \expandafter\expandafter
+        \csname\the\macname @@@@\endcsname\paramlist{%
+          \egroup\noexpand\scanmacro{\macrobody}}%
+    \else % 10 or more:
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\getargvals@{\the\macname}{\argl}%
+      }%
+      \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody
+      \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+    \fi
+  \fi}
+
+\catcode `\@\texiatcatcode\relax % end private-to-Texinfo catcodes
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+{\catcode`\@=0 \catcode`\\=13  % We need to manipulate \ so use @ as escape
+@catcode`@_=11  % private names
+@catcode`@!=11  % used as argument separator
+
+% \passargtomacro#1#2 -
+% Call #1 with a list of tokens #2, with any doubled backslashes in #2
+% compressed to one.
+%
+% This implementation works by expansion, and not execution (so we cannot use 
+% \def or similar).  This reduces the risk of this failing in contexts where 
+% complete expansion is done with no execution (for example, in writing out to 
+% an auxiliary file for an index entry).
+% 
+% State is kept in the input stream: the argument passed to
+% @look_ahead, @gobble_and_check_finish and @add_segment is
+%
+% THE_MACRO ARG_RESULT ! {PENDING_BS} NEXT_TOKEN  (... rest of input)
+%
+% where:
+% THE_MACRO - name of the macro we want to call
+% ARG_RESULT - argument list we build to pass to that macro
+% PENDING_BS - either a backslash or nothing
+% NEXT_TOKEN - used to look ahead in the input stream to see what's coming next
+
+@gdef@passargtomacro#1#2{%
+  @add_segment #1!{}@relax#2\@_finish\%
+}
+@gdef@_finish{@_finishx} @global@let@_finishx@relax
+
+% #1 - THE_MACRO ARG_RESULT
+% #2 - PENDING_BS
+% #3 - NEXT_TOKEN
+% #4 used to look ahead
+%
+% If the next token is not a backslash, process the rest of the argument; 
+% otherwise, remove the next token.
+@gdef@look_ahead#1!#2#3#4{%
+  @ifx#4\%
+   @expandafter@gobble_and_check_finish 
+  @else
+   @expandafter@add_segment
+  @fi#1!{#2}#4#4%
+}
+
+% #1 - THE_MACRO ARG_RESULT
+% #2 - PENDING_BS
+% #3 - NEXT_TOKEN
+% #4 should be a backslash, which is gobbled.
+% #5 looks ahead
+%
+% Double backslash found.  Add a single backslash, and look ahead.
+@gdef@gobble_and_check_finish#1!#2#3#4#5{%
+  @add_segment#1\!{}#5#5%
+}
+
+@gdef@is_fi{@fi}
+
+% #1 - THE_MACRO ARG_RESULT
+% #2 - PENDING_BS
+% #3 - NEXT_TOKEN
+% #4 is input stream until next backslash
+%
+% Input stream is either at the start of the argument, or just after a 
+% backslash sequence, either a lone backslash, or a doubled backslash.  
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish, 
+% finish; otherwise, append to ARG_RESULT the segment of the argument up until
+% the next backslash.  PENDING_BACKSLASH contains a backslash to represent
+% a backslash just before the start of the input stream that has not been
+% added to ARG_RESULT.
+@gdef@add_segment#1!#2#3#4\{%
+@ifx#3@_finish
+  @call_the_macro#1!%
+@else
+  % append the pending backslash to the result, followed by the next segment
+  @expandafter@is_fi@look_ahead#1#2#4!{\}@fi
+  % this @fi is discarded by @look_ahead.
+  % we can't get rid of it with \expandafter because we don't know how 
+  % long #4 is.
+}
+
+% #1 - THE_MACRO
+% #2 - ARG_RESULT
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the 
+% conditional.
+@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
+
+}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% \braceorline MAC is used for a one-argument macro MAC.  It checks
+% whether the next non-whitespace character is a {.  It sets the context
+% for reading the argument (slightly different in the two cases).  Then,
+% to read the argument, in the whole-line case, it then calls the regular
+% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
+% 
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+  \ifx\nchar\bgroup
+    \macroargctxt
+    \expandafter\passargtomacro
+  \else
+    \macrolineargctxt\expandafter\parsearg
+  \fi \macnamexxx}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign.  Make them active and then expand them all to nothing.
+%
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+  {%
+    \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
+    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+  }%
+  \next
+}
+
+
+\message{cross references,}
+
+\newwrite\auxfile
+\newif\ifhavexrefs    % True if xref values are known.
+\newif\ifwarnedxrefs  % True if we warned once that they aren't known.
+
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{%
+  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+  node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.  The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross,  ,  , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
+\let\nwnode=\node
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node.  #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+  \ifx\lastnode\empty\else
+    \setref{\lastnode}{#1}%
+    \global\let\lastnode=\empty
+  \fi
+}
+
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \lastsection,
+%                 or the anchor name.
+% 2) NAME-snt   - section number and type, passed as the SNT arg, or
+%                 empty for anchors.
+% 3) NAME-pg    - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat.  In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof   - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+  \pdfmkdest{#1}%
+  \iflinks
+    {%
+      \requireauxfile
+      \atdummies  % preserve commands, but don't expand them
+      % match definition in \xrdef, \refx, \xrefX.
+      \def\value##1{##1}%
+      \edef\writexrdef##1##2{%
+	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+	  ##1}{##2}}% these are parameters of \writexrdef
+      }%
+      \toks0 = \expandafter{\lastsection}%
+      \immediate \writexrdef{title}{\the\toks0 }%
+      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
+    }%
+  \fi
+}
+
+% @xrefautosectiontitle on|off says whether @section(ing) names are used
+% automatically in xrefs, if the third arg is not explicitly specified.
+% This was provided as a "secret" @set xref-automatic-section-title
+% variable, now it's official.
+% 
+\parseargdef\xrefautomaticsectiontitle{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% 
+% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual.  All but the node name can be omitted.
+%
+\def\pxref{\putwordsee{} \xrefXX}
+\def\xref{\putwordSee{} \xrefXX}
+\def\ref{\xrefXX}
+
+\def\xrefXX#1{\def\xrefXXarg{#1}\futurelet\tokenafterxref\xrefXXX}
+\def\xrefXXX{\expandafter\xrefX\expandafter[\xrefXXarg,,,,,,,]}
+%
+\newbox\toprefbox
+\newbox\printedrefnamebox
+\newbox\infofilenamebox
+\newbox\printedmanualbox
+%
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+  \unsepspaces
+  %
+  % Get args without leading/trailing spaces.
+  \def\printedrefname{\ignorespaces #3}%
+  \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}%
+  %
+  \def\infofilename{\ignorespaces #4}%
+  \setbox\infofilenamebox = \hbox{\infofilename\unskip}%
+  %
+  \def\printedmanual{\ignorespaces #5}%
+  \setbox\printedmanualbox  = \hbox{\printedmanual\unskip}%
+  %
+  % If the printed reference name (arg #3) was not explicitly given in
+  % the @xref, figure out what we want to use.
+  \ifdim \wd\printedrefnamebox = 0pt
+    % No printed node name was explicitly given.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+      % Not auto section-title: use node name inside the square brackets.
+      \def\printedrefname{\ignorespaces #1}%
+    \else
+      % Auto section-title: use chapter/section title inside
+      % the square brackets if we have it.
+      \ifdim \wd\printedmanualbox > 0pt
+        % It is in another manual, so we don't have it; use node name.
+        \def\printedrefname{\ignorespaces #1}%
+      \else
+        \ifhavexrefs
+          % We (should) know the real title if we have the xref values.
+          \def\printedrefname{\refx{#1-title}{}}%
+        \else
+          % Otherwise just copy the Info node name.
+          \def\printedrefname{\ignorespaces #1}%
+        \fi%
+      \fi
+    \fi
+  \fi
+  %
+  % Make link in pdf output.
+  \ifpdf
+    % For pdfTeX and LuaTeX
+    {\indexnofonts
+     \makevalueexpandable
+     \turnoffactive
+     % This expands tokens, so do it after making catcode changes, so _
+     % etc. don't get their TeX definitions.  This ignores all spaces in
+     % #4, including (wrongly) those in the middle of the filename.
+     \getfilename{#4}%
+     %
+     % This (wrongly) does not take account of leading or trailing
+     % spaces in #1, which should be ignored.
+     \setpdfdestname{#1}%
+     %
+     \ifx\pdfdestname\empty
+       \def\pdfdestname{Top}% no empty targets
+     \fi
+     %
+     \leavevmode
+     \startlink attr{/Border [0 0 0]}%
+     \ifnum\filenamelength>0
+       goto file{\the\filename.pdf} name{\pdfdestname}%
+     \else
+       goto name{\pdfmkpgn{\pdfdestname}}%
+     \fi
+    }%
+    \setcolor{\linkcolor}%
+  \else
+    \ifx\XeTeXrevision\thisisundefined
+    \else
+      % For XeTeX
+      {\indexnofonts
+       \makevalueexpandable
+       \turnoffactive
+       % This expands tokens, so do it after making catcode changes, so _
+       % etc. don't get their TeX definitions.  This ignores all spaces in
+       % #4, including (wrongly) those in the middle of the filename.
+       \getfilename{#4}%
+       %
+       % This (wrongly) does not take account of leading or trailing
+       % spaces in #1, which should be ignored.
+       \setpdfdestname{#1}%
+       %
+       \ifx\pdfdestname\empty
+         \def\pdfdestname{Top}% no empty targets
+       \fi
+       %
+       \leavevmode
+       \ifnum\filenamelength>0
+         % With default settings,
+         % XeTeX (xdvipdfmx) replaces link destination names with integers.
+         % In this case, the replaced destination names of
+         % remote PDFs are no longer known.  In order to avoid a replacement,
+         % you can use xdvipdfmx's command line option `-C 0x0010'.
+         % If you use XeTeX 0.99996+ (TeX Live 2016+),
+         % this command line option is no longer necessary
+         % because we can use the `dvipdfmx:config' special.
+         \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
+           << /S /GoToR /F (\the\filename.pdf) /D (\pdfdestname) >> >>}%
+       \else
+         \special{pdf:bann << /Border [0 0 0] /Type /Annot /Subtype /Link /A
+           << /S /GoTo /D (\pdfdestname) >> >>}%
+       \fi
+      }%
+      \setcolor{\linkcolor}%
+    \fi
+  \fi
+  {%
+    % Have to otherify everything special to allow the \csname to
+    % include an _ in the xref name, etc.
+    \indexnofonts
+    \turnoffactive
+    \def\value##1{##1}%
+    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+      \csname XR#1-title\endcsname
+  }%
+  %
+  % Float references are printed completely differently: "Figure 1.2"
+  % instead of "[somenode], p.3".  \iffloat distinguishes them by
+  % \Xthisreftitle being set to a magic string.
+  \iffloat\Xthisreftitle
+    % If the user specified the print name (third arg) to the ref,
+    % print it instead of our usual "Figure 1.2".
+    \ifdim\wd\printedrefnamebox = 0pt
+      \refx{#1-snt}{}%
+    \else
+      \printedrefname
+    \fi
+    %
+    % If the user also gave the printed manual name (fifth arg), append
+    % "in MANUALNAME".
+    \ifdim \wd\printedmanualbox > 0pt
+      \space \putwordin{} \cite{\printedmanual}%
+    \fi
+  \else
+    % node/anchor (non-float) references.
+    % 
+    % If we use \unhbox to print the node names, TeX does not insert
+    % empty discretionaries after hyphens, which means that it will not
+    % find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens,
+    % this is a loss.  Therefore, we give the text of the node name
+    % again, so it is as if TeX is seeing it for the first time.
+    % 
+    \ifdim \wd\printedmanualbox > 0pt
+      % Cross-manual reference with a printed manual name.
+      % 
+      \crossmanualxref{\cite{\printedmanual\unskip}}%
+    %
+    \else\ifdim \wd\infofilenamebox > 0pt
+      % Cross-manual reference with only an info filename (arg 4), no
+      % printed manual name (arg 5).  This is essentially the same as
+      % the case above; we output the filename, since we have nothing else.
+      % 
+      \crossmanualxref{\code{\infofilename\unskip}}%
+    %
+    \else
+      % Reference within this manual.
+      %
+      % _ (for example) has to be the character _ for the purposes of the
+      % control sequence corresponding to the node, but it has to expand
+      % into the usual \leavevmode...\vrule stuff for purposes of
+      % printing. So we \turnoffactive for the \refx-snt, back on for the
+      % printing, back off for the \refx-pg.
+      {\turnoffactive
+       % Only output a following space if the -snt ref is nonempty; for
+       % @unnumbered and @anchor, it won't be.
+       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+      }%
+      % output the `[mynode]' via the macro below so it can be overridden.
+      \xrefprintnodename\printedrefname
+      %
+      % But we always want a comma and a space:
+      ,\space
+      %
+      % output the `page 3'.
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+      % Add a , if xref followed by a space
+      \if\space\noexpand\tokenafterxref ,%
+      \else\ifx\	\tokenafterxref ,% @TAB
+      \else\ifx\*\tokenafterxref ,%   @*
+      \else\ifx\ \tokenafterxref ,%   @SPACE
+      \else\ifx\
+                \tokenafterxref ,%    @NL
+      \else\ifx\tie\tokenafterxref ,% @tie
+      \fi\fi\fi\fi\fi\fi
+    \fi\fi
+  \fi
+  \endlink
+\endgroup}
+
+% Output a cross-manual xref to #1.  Used just above (twice).
+% 
+% Only include the text "Section ``foo'' in" if the foo is neither
+% missing or Top.  Thus, @xref{,,,foo,The Foo Manual} outputs simply
+% "see The Foo Manual", the idea being to refer to the whole manual.
+% 
+% But, this being TeX, we can't easily compare our node name against the
+% string "Top" while ignoring the possible spaces before and after in
+% the input.  By adding the arbitrary 7sp below, we make it much less
+% likely that a real node name would have the same width as "Top" (e.g.,
+% in a monospaced font).  Hopefully it will never happen in practice.
+% 
+% For the same basic reason, we retypeset the "Top" at every
+% reference, since the current font is indeterminate.
+% 
+\def\crossmanualxref#1{%
+  \setbox\toprefbox = \hbox{Top\kern7sp}%
+  \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
+  \ifdim \wd2 > 7sp  % nonempty?
+    \ifdim \wd2 = \wd\toprefbox \else  % same as Top?
+      \putwordSection{} ``\printedrefname'' \putwordin{}\space
+    \fi
+  \fi
+  #1%
+}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output.  It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents.  Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
+
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+  \ifnum\secno=0
+    \putwordChapter@tie \the\chapno
+  \else \ifnum\subsecno=0
+    \putwordSection@tie \the\chapno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+\def\Yappendix{%
+  \ifnum\secno=0
+     \putwordAppendix@tie @char\the\appendixno{}%
+  \else \ifnum\subsecno=0
+     \putwordSection@tie @char\the\appendixno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie
+      @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+
+% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME.  SUFFIX 
+% is output afterwards if non-empty.
+\def\refx#1#2{%
+  \requireauxfile
+  {%
+    \indexnofonts
+    \otherbackslash
+    \def\value##1{##1}%
+    \expandafter\global\expandafter\let\expandafter\thisrefX
+      \csname XR#1\endcsname
+  }%
+  \ifx\thisrefX\relax
+    % If not defined, say something at least.
+    \angleleft un\-de\-fined\angleright
+    \iflinks
+      \ifhavexrefs
+        {\toks0 = {#1}% avoid expansion of possibly-complex value
+         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
+      \else
+        \ifwarnedxrefs\else
+          \global\warnedxrefstrue
+          \message{Cross reference values unknown; you must run TeX again.}%
+        \fi
+      \fi
+    \fi
+  \else
+    % It's defined, so just use it.
+    \thisrefX
+  \fi
+  #2% Output the suffix in any case.
+}
+
+% This is the macro invoked by entries in the aux file.  Define a control 
+% sequence for a cross-reference target (we prepend XR to the control sequence 
+% name to avoid collisions).  The value is the page number.  If this is a float 
+% type, we have more work to do.
+%
+\def\xrdef#1#2{%
+  {% Expand the node or anchor name to remove control sequences.
+   % \turnoffactive stops 8-bit characters being changed to commands
+   % like @'e.  \refx does the same to retrieve the value in the definition.
+    \indexnofonts
+    \turnoffactive
+    \def\value##1{##1}%
+    \xdef\safexrefname{#1}%
+  }%
+  %
+  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
+  %
+  % Was that xref control sequence that we just defined for a float?
+  \expandafter\iffloat\csname XR\safexrefname\endcsname
+    % it was a float, and we have the (safe) float type in \iffloattype.
+    \expandafter\let\expandafter\floatlist
+      \csname floatlist\iffloattype\endcsname
+    %
+    % Is this the first time we've seen this float type?
+    \expandafter\ifx\floatlist\relax
+      \toks0 = {\do}% yes, so just \do
+    \else
+      % had it before, so preserve previous elements in list.
+      \toks0 = \expandafter{\floatlist\do}%
+    \fi
+    %
+    % Remember this xref in the control sequence \floatlistFLOATTYPE,
+    % for later use in \listoffloats.
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+      {\safexrefname}}%
+  \fi
+}
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate at the beginning of the file.
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% Used when writing to the aux file, or when using data from it.
+\def\requireauxfile{%
+  \iflinks
+    \tryauxfile
+    % Open the new aux file.  TeX will close it automatically at exit.
+    \immediate\openout\auxfile=\jobname.aux
+  \fi
+  \global\let\requireauxfile=\relax   % Only do this once.
+}
+
+% Read the last existing aux file, if any.  No error if none exists.
+%
+\def\tryauxfile{%
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \readdatafile{aux}%
+    \global\havexrefstrue
+  \fi
+  \closein 1
+}
+
+\def\setupdatafile{%
+  \catcode`\^^@=\other
+  \catcode`\^^A=\other
+  \catcode`\^^B=\other
+  \catcode`\^^C=\other
+  \catcode`\^^D=\other
+  \catcode`\^^E=\other
+  \catcode`\^^F=\other
+  \catcode`\^^G=\other
+  \catcode`\^^H=\other
+  \catcode`\^^K=\other
+  \catcode`\^^L=\other
+  \catcode`\^^N=\other
+  \catcode`\^^P=\other
+  \catcode`\^^Q=\other
+  \catcode`\^^R=\other
+  \catcode`\^^S=\other
+  \catcode`\^^T=\other
+  \catcode`\^^U=\other
+  \catcode`\^^V=\other
+  \catcode`\^^W=\other
+  \catcode`\^^X=\other
+  \catcode`\^^Z=\other
+  \catcode`\^^[=\other
+  \catcode`\^^\=\other
+  \catcode`\^^]=\other
+  \catcode`\^^^=\other
+  \catcode`\^^_=\other
+  % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
+  % supported in the main text, it doesn't seem desirable.  Furthermore,
+  % that is not enough: for node names that actually contain a ^
+  % character, we would end up writing a line like this: 'xrdef {'hat
+  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+  % argument, and \hat is not an expandable control sequence.  It could
+  % all be worked out, but why?  Either we support ^^ or we don't.
+  %
+  % The other change necessary for this was to define \auxhat:
+  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+  % and then to call \auxhat in \setq.
+  %
+  \catcode`\^=\other
+  %
+  % Special characters.  Should be turned off anyway, but...
+  \catcode`\~=\other
+  \catcode`\[=\other
+  \catcode`\]=\other
+  \catcode`\"=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\$=\other
+  \catcode`\#=\other
+  \catcode`\&=\other
+  \catcode`\%=\other
+  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+  %
+  % This is to support \ in node names and titles, since the \
+  % characters end up in a \csname.  It's easier than
+  % leaving it active and making its active definition an actual \
+  % character.  What I don't understand is why it works in the *value*
+  % of the xrdef.  Seems like it should be a catcode12 \, and that
+  % should not typeset properly.  But it works, so I'm moving on for
+  % now.  --karl, 15jan04.
+  \catcode`\\=\other
+  %
+  % @ is our escape character in .aux files, and we need braces.
+  \catcode`\{=1
+  \catcode`\}=2
+  \catcode`\@=0
+}
+
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
+\endgroup}
+
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for Info output only.
+\let\footnotestyle=\comment
+
+{\catcode `\@=11
+%
+% Auto-number footnotes.  Otherwise like plain.
+\gdef\footnote{%
+  \global\advance\footnoteno by \@ne
+  \edef\thisfootno{$^{\the\footnoteno}$}%
+  %
+  % In case the footnote comes at the end of a sentence, preserve the
+  % extra spacing after we do the footnote number.
+  \let\@sf\empty
+  \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+  %
+  % Remove inadvertent blank space before typesetting the footnote number.
+  \unskip
+  \thisfootno\@sf
+  \dofootnote
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter.  Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read.  --karl, 16nov96.
+%
+\gdef\dofootnote{%
+  \insert\footins\bgroup
+  %
+  % Nested footnotes are not supported in TeX, that would take a lot
+  % more work.  (\startsavinginserts does not suffice.)
+  \let\footnote=\errfootnotenest
+  %
+  % We want to typeset this text as a normal paragraph, even if the
+  % footnote reference occurs in (for example) a display environment.
+  % So reset some parameters.
+  \hsize=\txipagewidth
+  \interlinepenalty\interfootnotelinepenalty
+  \splittopskip\ht\strutbox % top baseline for broken footnotes
+  \splitmaxdepth\dp\strutbox
+  \floatingpenalty\@MM
+  \leftskip\z@skip
+  \rightskip\z@skip
+  \spaceskip\z@skip
+  \xspaceskip\z@skip
+  \parindent\defaultparindent
+  %
+  \smallfonts \rm
+  %
+  % Because we use hanging indentation in footnotes, a @noindent appears
+  % to exdent this text, so make it be a no-op.  makeinfo does not use
+  % hanging indentation so @noindent can still be needed within footnote
+  % text after an @example or the like (not that this is good style).
+  \let\noindent = \relax
+  %
+  % Hang the footnote text off the number.  Use \everypar in case the
+  % footnote extends for more than one paragraph.
+  \everypar = {\hang}%
+  \textindent{\thisfootno}%
+  %
+  % Don't crash into the line above the footnote text.  Since this
+  % expands into a box, it must come within the paragraph, lest it
+  % provide a place where TeX can split the footnote.
+  \footstrut
+  %
+  % Invoke rest of plain TeX footnote routine.
+  \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
+
+\def\errfootnotenest{%
+  \errhelp=\EMsimple
+  \errmessage{Nested footnotes not supported in texinfo.tex,
+    even though they work in makeinfo; sorry}
+}
+
+\def\errfootnoteheading{%
+  \errhelp=\EMsimple
+  \errmessage{Footnotes in chapters, sections, etc., are not supported}
+}
+
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished.  Otherwise, the insertion
+% would be lost.
+% Similarly, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes.  --kasal, 16nov03.
+%
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+  \ifx \insert\ptexinsert
+    \let\insert\saveinsert
+  \else
+    \let\checkinserts\relax
+  \fi
+}
+
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+  \afterassignment\next
+  % swallow the left brace
+  \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+    {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
+  \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+  \next
+}
+\def\newsaveinsX #1{%
+  \csname newbox\endcsname #1%
+  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+    \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
+
+% @image.  We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front.  If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+  % Do not bother showing banner with epsf.tex v2.7k (available in
+  % doc/epsf.tex and on ctan).
+  \def\epsfannounce{\toks0 = }%
+  \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+  work.  It is also included in the Texinfo distribution, or you can get
+  it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+  \ifx\epsfbox\thisisundefined
+    \ifwarnednoepsf \else
+      \errhelp = \noepsfhelp
+      \errmessage{epsf.tex not found, images will be ignored}%
+      \global\warnednoepsftrue
+    \fi
+  \else
+    \imagexxx #1,,,,,\finish
+  \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+  \catcode`\^^M = 5     % in case we're inside an example
+  \normalturnoffactive  % allow _ et al. in names
+  \def\xprocessmacroarg{\eatspaces}% in case we are being used via a macro
+  % If the image is by itself, center it.
+  \ifvmode
+    \imagevmodetrue
+  \else \ifx\centersub\centerV
+    % for @center @image, we need a vbox so we can have our vertical space
+    \imagevmodetrue
+    \vbox\bgroup % vbox has better behavior than vtop herev
+  \fi\fi
+  %
+  \ifimagevmode
+    \nobreak\medskip
+    % Usually we'll have text after the image which will insert
+    % \parskip glue, so insert it here too to equalize the space
+    % above and below.
+    \nobreak\vskip\parskip
+    \nobreak
+  \fi
+  %
+  % Leave vertical mode so that indentation from an enclosing
+  %  environment such as @quotation is respected.
+  % However, if we're at the top level, we don't want the
+  %  normal paragraph indentation.
+  % On the other hand, if we are in the case of @center @image, we don't
+  %  want to start a paragraph, which will create a hsize-width box and
+  %  eradicate the centering.
+  \ifx\centersub\centerV\else \noindent \fi
+  %
+  % Output the image.
+  \ifpdf
+    % For pdfTeX and LuaTeX <= 0.80
+    \dopdfimage{#1}{#2}{#3}%
+  \else
+    \ifx\XeTeXrevision\thisisundefined
+      % For epsf.tex
+      % \epsfbox itself resets \epsf?size at each figure.
+      \setbox0 = \hbox{\ignorespaces #2}%
+        \ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+      \setbox0 = \hbox{\ignorespaces #3}%
+        \ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+      \epsfbox{#1.eps}%
+    \else
+      % For XeTeX
+      \doxeteximage{#1}{#2}{#3}%
+    \fi
+  \fi
+  %
+  \ifimagevmode
+    \medskip  % space after a standalone image
+  \fi  
+  \ifx\centersub\centerV \egroup \fi
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc.  We don't actually implement floating yet, we always include the
+% float "here".  But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label.  Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored.  It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+  \let\thiscaption=\empty
+  \let\thisshortcaption=\empty
+  %
+  % don't lose footnotes inside @float.
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
+  \startsavinginserts
+  %
+  % We can't be used inside a paragraph.
+  \par
+  %
+  \vtop\bgroup
+    \def\floattype{#1}%
+    \def\floatlabel{#2}%
+    \def\floatloc{#3}% we do nothing with this yet.
+    %
+    \ifx\floattype\empty
+      \let\safefloattype=\empty
+    \else
+      {%
+        % the floattype might have accents or other special characters,
+        % but we need to use it in a control sequence name.
+        \indexnofonts
+        \turnoffactive
+        \xdef\safefloattype{\floattype}%
+      }%
+    \fi
+    %
+    % If label is given but no type, we handle that as the empty type.
+    \ifx\floatlabel\empty \else
+      % We want each FLOATTYPE to be numbered separately (Figure 1,
+      % Table 1, Figure 2, ...).  (And if no label, no number.)
+      %
+      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+      \global\advance\floatno by 1
+      %
+      {%
+        % This magic value for \lastsection is output by \setref as the
+        % XREFLABEL-title value.  \xrefX uses it to distinguish float
+        % labels (which have a completely different output format) from
+        % node and anchor labels.  And \xrdef uses it to construct the
+        % lists of floats.
+        %
+        \edef\lastsection{\floatmagic=\safefloattype}%
+        \setref{\floatlabel}{Yfloat}%
+      }%
+    \fi
+    %
+    % start with \parskip glue, I guess.
+    \vskip\parskip
+    %
+    % Don't suppress indentation if a float happens to start a section.
+    \restorefirstparagraphindent
+}
+
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption:    Foo 1.1
+% @float Foo & @caption{Cap}:     Foo: Cap
+% @float Foo & no caption:        Foo
+% @float ,lbl & Caption{Cap}:     1.1: Cap
+% @float ,lbl & no caption:       1.1
+% @float & @caption{Cap}:         Cap
+% @float & no caption:
+%
+\def\Efloat{%
+    \let\floatident = \empty
+    %
+    % In all cases, if we have a float type, it comes first.
+    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+    %
+    % If we have an xref label, the number comes next.
+    \ifx\floatlabel\empty \else
+      \ifx\floattype\empty \else % if also had float type, need tie first.
+        \appendtomacro\floatident{\tie}%
+      \fi
+      % the number.
+      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+    \fi
+    %
+    % Start the printed caption with what we've constructed in
+    % \floatident, but keep it separate; we need \floatident again.
+    \let\captionline = \floatident
+    %
+    \ifx\thiscaption\empty \else
+      \ifx\floatident\empty \else
+        \appendtomacro\captionline{: }% had ident, so need a colon between
+      \fi
+      %
+      % caption text.
+      \appendtomacro\captionline{\scanexp\thiscaption}%
+    \fi
+    %
+    % If we have anything to print, print it, with space before.
+    % Eventually this needs to become an \insert.
+    \ifx\captionline\empty \else
+      \vskip.5\parskip
+      \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
+    \fi
+    %
+    % If have an xref label, write the list of floats info.  Do this
+    % after the caption, to avoid chance of it being a breakpoint.
+    \ifx\floatlabel\empty \else
+      % Write the text that goes in the lof to the aux file as
+      % \floatlabel-lof.  Besides \floatident, we include the short
+      % caption if specified, else the full caption if specified, else nothing.
+      {%
+        \requireauxfile
+        \atdummies
+        %
+        \ifx\thisshortcaption\empty
+          \def\gtemp{\thiscaption}%
+        \else
+          \def\gtemp{\thisshortcaption}%
+        \fi
+        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+          \ifx\gtemp\empty \else : \gtemp \fi}}%
+      }%
+    \fi
+  \egroup  % end of \vtop
+  %
+  \checkinserts
+}
+
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+  \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
+
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use.  Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+  \ifx#1\relax
+      % Haven't seen this figure type before.
+      \csname newcount\endcsname #1%
+      %
+      % Remember to reset this floatno at the next chap.
+      \expandafter\gdef\expandafter\resetallfloatnos
+        \expandafter{\resetallfloatnos #1=0 }%
+  \fi
+  \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref.  That is, the magic
+% \lastsection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
+% (safe) float type for this float.  We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+  \def\temp{#1}%
+  \def\iffloattype{#2}%
+  \ifx\temp\floatmagic
+}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+  \def\floattype{#1}% floattype
+  {%
+    % the floattype might have accents or other special characters,
+    % but we need to use it in a control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safefloattype{\floattype}%
+  }%
+  %
+  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+    \ifhavexrefs
+      % if the user said @listoffloats foo but never @float foo.
+      \message{\linenumber No `\safefloattype' floats to list.}%
+    \fi
+  \else
+    \begingroup
+      \leftskip=\tocindent  % indent these entries like a toc
+      \let\do=\listoffloatsdo
+      \csname floatlist\safefloattype\endcsname
+    \endgroup
+  \fi
+}
+
+% This is called on each entry in a list of floats.  We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file.  We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+  % Can't fully expand XR#1-lof because it can contain anything.  Just
+  % pass the control sequence.  On the other hand, XR#1-pg is just the
+  % page number, and we want to fully expand that so we can get a link
+  % in pdf output.
+  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+  %
+  % use the same \entry macro we use to generate the TOC and index.
+  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+  \writeentry
+}}
+
+
+\message{localization,}
+
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding.  Single argument is the language
+% (de) or locale (de_DE) abbreviation.
+%
+{
+  \catcode`\_ = \active
+  \globaldefs=1
+\parseargdef\documentlanguage{%
+  \tex % read txi-??.tex file in plain TeX.
+    % Read the file by the name they passed if it exists.
+    \let_ = \normalunderscore  % normal _ character for filename test
+    \openin 1 txi-#1.tex
+    \ifeof 1
+      \documentlanguagetrywithoutunderscore #1_\finish
+    \else
+      \globaldefs = 1  % everything in the txi-LL files needs to persist
+      \input txi-#1.tex
+    \fi
+    \closein 1
+  \endgroup % end raw TeX
+}
+%
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
+  \openin 1 txi-#1.tex
+  \ifeof 1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+  \else
+    \globaldefs = 1  % everything in the txi-LL files needs to persist
+    \input txi-#1.tex
+  \fi
+  \closein 1
+}
+}% end of special _ catcode
+%
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty.  Maybe you need to install it?  Putting it in the current
+directory should work if nowhere else does.}
+
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages.  This means we can support hyphenation in
+% Texinfo, at least to some extent.  (This still doesn't solve the
+% accented characters problem.)
+%
+\catcode`@=11
+\def\txisetlanguage#1#2#3{%
+  % do not set the language if the name is undefined in the current TeX.
+  \expandafter\ifx\csname lang@#1\endcsname \relax
+    \message{no patterns for #1}%
+  \else
+    \global\language = \csname lang@#1\endcsname
+  \fi
+  % but there is no harm in adjusting the hyphenmin values regardless.
+  \global\lefthyphenmin = #2\relax
+  \global\righthyphenmin = #3\relax
+}
+
+% XeTeX and LuaTeX can handle Unicode natively.
+% Their default I/O uses UTF-8 sequences instead of a byte-wise operation.
+% Other TeX engines' I/O (pdfTeX, etc.) is byte-wise.
+%
+\newif\iftxinativeunicodecapable
+\newif\iftxiusebytewiseio
+
+\ifx\XeTeXrevision\thisisundefined
+  \ifx\luatexversion\thisisundefined
+    \txinativeunicodecapablefalse
+    \txiusebytewiseiotrue
+  \else
+    \txinativeunicodecapabletrue
+    \txiusebytewiseiofalse
+  \fi
+\else
+  \txinativeunicodecapabletrue
+  \txiusebytewiseiofalse
+\fi
+
+% Set I/O by bytes instead of UTF-8 sequence for XeTeX and LuaTex
+% for non-UTF-8 (byte-wise) encodings.
+%
+\def\setbytewiseio{%
+  \ifx\XeTeXrevision\thisisundefined
+  \else
+    \XeTeXdefaultencoding "bytes"  % For subsequent files to be read
+    \XeTeXinputencoding "bytes"  % For document root file
+    % Unfortunately, there seems to be no corresponding XeTeX command for
+    % output encoding.  This is a problem for auxiliary index and TOC files.
+    % The only solution would be perhaps to write out @U{...} sequences in
+    % place of non-ASCII characters.
+  \fi
+
+  \ifx\luatexversion\thisisundefined
+  \else
+    \directlua{
+    local utf8_char, byte, gsub = unicode.utf8.char, string.byte, string.gsub
+    local function convert_char (char)
+      return utf8_char(byte(char))
+    end
+
+    local function convert_line (line)
+      return gsub(line, ".", convert_char)
+    end
+
+    callback.register("process_input_buffer", convert_line)
+
+    local function convert_line_out (line)
+      local line_out = ""
+      for c in string.utfvalues(line) do
+         line_out = line_out .. string.char(c)
+      end
+      return line_out
+    end
+
+    callback.register("process_output_buffer", convert_line_out)
+    }
+  \fi
+
+  \txiusebytewiseiotrue
+}
+
+
+% Helpers for encodings.
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \global\catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+\def\setnonasciicharscatcodenonglobal#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\def\documentencoding{\parseargusing\filenamecatcodes\documentencodingzzz}
+\def\documentencodingzzz#1{%
+  %
+  % Encoding being declared for the document.
+  \def\declaredencoding{\csname #1.enc\endcsname}%
+  %
+  % Supported encodings: names converted to tokens in order to be able
+  % to compare them with \ifx.
+  \def\ascii{\csname US-ASCII.enc\endcsname}%
+  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+  \def\latone{\csname ISO-8859-1.enc\endcsname}%
+  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+  \def\utfeight{\csname UTF-8.enc\endcsname}%
+  %
+  \ifx \declaredencoding \ascii
+     \asciichardefs
+  %
+  \else \ifx \declaredencoding \lattwo
+     \iftxinativeunicodecapable
+       \setbytewiseio
+     \fi
+     \setnonasciicharscatcode\active
+     \lattwochardefs
+  %
+  \else \ifx \declaredencoding \latone
+     \iftxinativeunicodecapable
+       \setbytewiseio
+     \fi
+     \setnonasciicharscatcode\active
+     \latonechardefs
+  %
+  \else \ifx \declaredencoding \latnine
+     \iftxinativeunicodecapable
+       \setbytewiseio
+     \fi
+     \setnonasciicharscatcode\active
+     \latninechardefs
+  %
+  \else \ifx \declaredencoding \utfeight
+     \iftxinativeunicodecapable
+       % For native Unicode handling (XeTeX and LuaTeX)
+       \nativeunicodechardefs
+     \else
+       % For treating UTF-8 as byte sequences (TeX, eTeX and pdfTeX)
+       \setnonasciicharscatcode\active
+       % since we already invoked \utfeightchardefs at the top level
+       % (below), do not re-invoke it, otherwise our check for duplicated
+       % definitions gets triggered.  Making non-ascii chars active is
+       % sufficient.
+     \fi
+  %
+  \else
+    \message{Ignoring unknown document encoding: #1.}%
+  %
+  \fi % utfeight
+  \fi % latnine
+  \fi % latone
+  \fi % lattwo
+  \fi % ascii
+  %
+  \ifx\XeTeXrevision\thisisundefined
+  \else
+    \ifx \declaredencoding \utfeight
+    \else
+      \ifx \declaredencoding \ascii
+      \else
+        \message{Warning: XeTeX with non-UTF-8 encodings cannot handle %
+        non-ASCII characters in auxiliary files.}%
+      \fi
+    \fi
+  \fi
+}
+
+% emacs-page
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing, sorry: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+
+\def\gdefchar#1#2{%
+\gdef#1{%
+   \ifpassthroughchars
+     \string#1%
+   \else
+     #2%
+   \fi
+}}
+
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+  \gdefchar^^a0{\tie}
+  \gdefchar^^a1{\exclamdown}
+  \gdefchar^^a2{{\tcfont \char162}} % cent
+  \gdefchar^^a3{\pounds{}}
+  \gdefchar^^a4{{\tcfont \char164}} % currency
+  \gdefchar^^a5{{\tcfont \char165}} % yen
+  \gdefchar^^a6{{\tcfont \char166}} % broken bar
+  \gdefchar^^a7{\S}
+  \gdefchar^^a8{\"{}}
+  \gdefchar^^a9{\copyright{}}
+  \gdefchar^^aa{\ordf}
+  \gdefchar^^ab{\guillemetleft{}}
+  \gdefchar^^ac{\ensuremath\lnot}
+  \gdefchar^^ad{\-}
+  \gdefchar^^ae{\registeredsymbol{}}
+  \gdefchar^^af{\={}}
+  %
+  \gdefchar^^b0{\textdegree}
+  \gdefchar^^b1{$\pm$}
+  \gdefchar^^b2{$^2$}
+  \gdefchar^^b3{$^3$}
+  \gdefchar^^b4{\'{}}
+  \gdefchar^^b5{$\mu$}
+  \gdefchar^^b6{\P}
+  \gdefchar^^b7{\ensuremath\cdot}
+  \gdefchar^^b8{\cedilla\ }
+  \gdefchar^^b9{$^1$}
+  \gdefchar^^ba{\ordm}
+  \gdefchar^^bb{\guillemetright{}}
+  \gdefchar^^bc{$1\over4$}
+  \gdefchar^^bd{$1\over2$}
+  \gdefchar^^be{$3\over4$}
+  \gdefchar^^bf{\questiondown}
+  %
+  \gdefchar^^c0{\`A}
+  \gdefchar^^c1{\'A}
+  \gdefchar^^c2{\^A}
+  \gdefchar^^c3{\~A}
+  \gdefchar^^c4{\"A}
+  \gdefchar^^c5{\ringaccent A}
+  \gdefchar^^c6{\AE}
+  \gdefchar^^c7{\cedilla C}
+  \gdefchar^^c8{\`E}
+  \gdefchar^^c9{\'E}
+  \gdefchar^^ca{\^E}
+  \gdefchar^^cb{\"E}
+  \gdefchar^^cc{\`I}
+  \gdefchar^^cd{\'I}
+  \gdefchar^^ce{\^I}
+  \gdefchar^^cf{\"I}
+  %
+  \gdefchar^^d0{\DH}
+  \gdefchar^^d1{\~N}
+  \gdefchar^^d2{\`O}
+  \gdefchar^^d3{\'O}
+  \gdefchar^^d4{\^O}
+  \gdefchar^^d5{\~O}
+  \gdefchar^^d6{\"O}
+  \gdefchar^^d7{$\times$}
+  \gdefchar^^d8{\O}
+  \gdefchar^^d9{\`U}
+  \gdefchar^^da{\'U}
+  \gdefchar^^db{\^U}
+  \gdefchar^^dc{\"U}
+  \gdefchar^^dd{\'Y}
+  \gdefchar^^de{\TH}
+  \gdefchar^^df{\ss}
+  %
+  \gdefchar^^e0{\`a}
+  \gdefchar^^e1{\'a}
+  \gdefchar^^e2{\^a}
+  \gdefchar^^e3{\~a}
+  \gdefchar^^e4{\"a}
+  \gdefchar^^e5{\ringaccent a}
+  \gdefchar^^e6{\ae}
+  \gdefchar^^e7{\cedilla c}
+  \gdefchar^^e8{\`e}
+  \gdefchar^^e9{\'e}
+  \gdefchar^^ea{\^e}
+  \gdefchar^^eb{\"e}
+  \gdefchar^^ec{\`{\dotless i}}
+  \gdefchar^^ed{\'{\dotless i}}
+  \gdefchar^^ee{\^{\dotless i}}
+  \gdefchar^^ef{\"{\dotless i}}
+  %
+  \gdefchar^^f0{\dh}
+  \gdefchar^^f1{\~n}
+  \gdefchar^^f2{\`o}
+  \gdefchar^^f3{\'o}
+  \gdefchar^^f4{\^o}
+  \gdefchar^^f5{\~o}
+  \gdefchar^^f6{\"o}
+  \gdefchar^^f7{$\div$}
+  \gdefchar^^f8{\o}
+  \gdefchar^^f9{\`u}
+  \gdefchar^^fa{\'u}
+  \gdefchar^^fb{\^u}
+  \gdefchar^^fc{\"u}
+  \gdefchar^^fd{\'y}
+  \gdefchar^^fe{\th}
+  \gdefchar^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+  % Encoding is almost identical to Latin1.
+  \latonechardefs
+  %
+  \gdefchar^^a4{\euro{}}
+  \gdefchar^^a6{\v S}
+  \gdefchar^^a8{\v s}
+  \gdefchar^^b4{\v Z}
+  \gdefchar^^b8{\v z}
+  \gdefchar^^bc{\OE}
+  \gdefchar^^bd{\oe}
+  \gdefchar^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+  \gdefchar^^a0{\tie}
+  \gdefchar^^a1{\ogonek{A}}
+  \gdefchar^^a2{\u{}}
+  \gdefchar^^a3{\L}
+  \gdefchar^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdefchar^^a5{\v L}
+  \gdefchar^^a6{\'S}
+  \gdefchar^^a7{\S}
+  \gdefchar^^a8{\"{}}
+  \gdefchar^^a9{\v S}
+  \gdefchar^^aa{\cedilla S}
+  \gdefchar^^ab{\v T}
+  \gdefchar^^ac{\'Z}
+  \gdefchar^^ad{\-}
+  \gdefchar^^ae{\v Z}
+  \gdefchar^^af{\dotaccent Z}
+  %
+  \gdefchar^^b0{\textdegree{}}
+  \gdefchar^^b1{\ogonek{a}}
+  \gdefchar^^b2{\ogonek{ }}
+  \gdefchar^^b3{\l}
+  \gdefchar^^b4{\'{}}
+  \gdefchar^^b5{\v l}
+  \gdefchar^^b6{\'s}
+  \gdefchar^^b7{\v{}}
+  \gdefchar^^b8{\cedilla\ }
+  \gdefchar^^b9{\v s}
+  \gdefchar^^ba{\cedilla s}
+  \gdefchar^^bb{\v t}
+  \gdefchar^^bc{\'z}
+  \gdefchar^^bd{\H{}}
+  \gdefchar^^be{\v z}
+  \gdefchar^^bf{\dotaccent z}
+  %
+  \gdefchar^^c0{\'R}
+  \gdefchar^^c1{\'A}
+  \gdefchar^^c2{\^A}
+  \gdefchar^^c3{\u A}
+  \gdefchar^^c4{\"A}
+  \gdefchar^^c5{\'L}
+  \gdefchar^^c6{\'C}
+  \gdefchar^^c7{\cedilla C}
+  \gdefchar^^c8{\v C}
+  \gdefchar^^c9{\'E}
+  \gdefchar^^ca{\ogonek{E}}
+  \gdefchar^^cb{\"E}
+  \gdefchar^^cc{\v E}
+  \gdefchar^^cd{\'I}
+  \gdefchar^^ce{\^I}
+  \gdefchar^^cf{\v D}
+  %
+  \gdefchar^^d0{\DH}
+  \gdefchar^^d1{\'N}
+  \gdefchar^^d2{\v N}
+  \gdefchar^^d3{\'O}
+  \gdefchar^^d4{\^O}
+  \gdefchar^^d5{\H O}
+  \gdefchar^^d6{\"O}
+  \gdefchar^^d7{$\times$}
+  \gdefchar^^d8{\v R}
+  \gdefchar^^d9{\ringaccent U}
+  \gdefchar^^da{\'U}
+  \gdefchar^^db{\H U}
+  \gdefchar^^dc{\"U}
+  \gdefchar^^dd{\'Y}
+  \gdefchar^^de{\cedilla T}
+  \gdefchar^^df{\ss}
+  %
+  \gdefchar^^e0{\'r}
+  \gdefchar^^e1{\'a}
+  \gdefchar^^e2{\^a}
+  \gdefchar^^e3{\u a}
+  \gdefchar^^e4{\"a}
+  \gdefchar^^e5{\'l}
+  \gdefchar^^e6{\'c}
+  \gdefchar^^e7{\cedilla c}
+  \gdefchar^^e8{\v c}
+  \gdefchar^^e9{\'e}
+  \gdefchar^^ea{\ogonek{e}}
+  \gdefchar^^eb{\"e}
+  \gdefchar^^ec{\v e}
+  \gdefchar^^ed{\'{\dotless{i}}}
+  \gdefchar^^ee{\^{\dotless{i}}}
+  \gdefchar^^ef{\v d}
+  %
+  \gdefchar^^f0{\dh}
+  \gdefchar^^f1{\'n}
+  \gdefchar^^f2{\v n}
+  \gdefchar^^f3{\'o}
+  \gdefchar^^f4{\^o}
+  \gdefchar^^f5{\H o}
+  \gdefchar^^f6{\"o}
+  \gdefchar^^f7{$\div$}
+  \gdefchar^^f8{\v r}
+  \gdefchar^^f9{\ringaccent u}
+  \gdefchar^^fa{\'u}
+  \gdefchar^^fb{\H u}
+  \gdefchar^^fc{\"u}
+  \gdefchar^^fd{\'y}
+  \gdefchar^^fe{\cedilla t}
+  \gdefchar^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions.  It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
+
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
+%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+  \ifx #1\relax
+    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+  \else
+    \expandafter #1%
+  \fi
+}
+
+% Give non-ASCII bytes the active definitions for processing UTF-8 sequences
+\begingroup
+  \catcode`\~13
+  \catcode`\$12
+  \catcode`\"12
+
+  % Loop from \countUTFx to \countUTFy, performing \UTFviiiTmp
+  % substituting ~ and $ with a character token of that value.
+  \def\UTFviiiLoop{%
+    \global\catcode\countUTFx\active
+    \uccode`\~\countUTFx
+    \uccode`\$\countUTFx
+    \uppercase\expandafter{\UTFviiiTmp}%
+    \advance\countUTFx by 1
+    \ifnum\countUTFx < \countUTFy
+      \expandafter\UTFviiiLoop
+    \fi}
+
+  % For bytes other than the first in a UTF-8 sequence.  Not expected to
+  % be expanded except when writing to auxiliary files.
+  \countUTFx = "80
+  \countUTFy = "C2
+  \def\UTFviiiTmp{%
+    \gdef~{%
+        \ifpassthroughchars $\fi}}%
+  \UTFviiiLoop
+
+  \countUTFx = "C2
+  \countUTFy = "E0
+  \def\UTFviiiTmp{%
+    \gdef~{%
+        \ifpassthroughchars $%
+        \else\expandafter\UTFviiiTwoOctets\expandafter$\fi}}%
+  \UTFviiiLoop
+
+  \countUTFx = "E0
+  \countUTFy = "F0
+  \def\UTFviiiTmp{%
+    \gdef~{%
+        \ifpassthroughchars $%
+        \else\expandafter\UTFviiiThreeOctets\expandafter$\fi}}%
+  \UTFviiiLoop
+
+  \countUTFx = "F0
+  \countUTFy = "F4
+  \def\UTFviiiTmp{%
+    \gdef~{%
+        \ifpassthroughchars $%
+        \else\expandafter\UTFviiiFourOctets\expandafter$\fi
+        }}%
+  \UTFviiiLoop
+\endgroup
+
+\def\globallet{\global\let} % save some \expandafter's below
+
+% @U{xxxx} to produce U+xxxx, if we support it.
+\def\U#1{%
+  \expandafter\ifx\csname uni:#1\endcsname \relax
+    \iftxinativeunicodecapable
+      % All Unicode characters can be used if native Unicode handling is
+      % active.  However, if the font does not have the glyph,
+      % letters are missing.
+      \begingroup
+        \uccode`\.="#1\relax
+        \uppercase{.}
+      \endgroup
+    \else
+      \errhelp = \EMsimple	
+      \errmessage{Unicode character U+#1 not supported, sorry}%
+    \fi
+  \else
+    \csname uni:#1\endcsname
+  \fi
+}
+
+% These macros are used here to construct the name of a control
+% sequence to be defined.
+\def\UTFviiiTwoOctetsName#1#2{%
+  \csname u8:#1\string #2\endcsname}%
+\def\UTFviiiThreeOctetsName#1#2#3{%
+  \csname u8:#1\string #2\string #3\endcsname}%
+\def\UTFviiiFourOctetsName#1#2#3#4{%
+  \csname u8:#1\string #2\string #3\string #4\endcsname}%
+
+% For UTF-8 byte sequences (TeX, e-TeX and pdfTeX),
+% provide a definition macro to replace a Unicode character;
+% this gets used by the @U command
+%
+\begingroup
+  \catcode`\"=12
+  \catcode`\<=12
+  \catcode`\.=12
+  \catcode`\,=12
+  \catcode`\;=12
+  \catcode`\!=12
+  \catcode`\~=13
+  \gdef\DeclareUnicodeCharacterUTFviii#1#2{%
+    \countUTFz = "#1\relax
+    \begingroup
+      \parseXMLCharref
+    
+      % Give \u8:... its definition.  The sequence of seven \expandafter's
+      % expands after the \gdef three times, e.g.
+      %
+      % 1.  \UTFviiTwoOctetsName B1 B2
+      % 2.  \csname u8:B1 \string B2 \endcsname
+      % 3.  \u8: B1 B2  (a single control sequence token)
+      %
+      \expandafter\expandafter
+      \expandafter\expandafter
+      \expandafter\expandafter
+      \expandafter\gdef       \UTFviiiTmp{#2}%
+      % 
+      \expandafter\ifx\csname uni:#1\endcsname \relax \else
+       \message{Internal error, already defined: #1}%
+      \fi
+      %
+      % define an additional control sequence for this code point.
+      \expandafter\globallet\csname uni:#1\endcsname \UTFviiiTmp
+    \endgroup}
+  %
+  % Given the value in \countUTFz as a Unicode code point, set \UTFviiiTmp
+  % to the corresponding UTF-8 sequence.
+  \gdef\parseXMLCharref{%
+    \ifnum\countUTFz < "A0\relax
+      \errhelp = \EMsimple
+      \errmessage{Cannot define Unicode char value < 00A0}%
+    \else\ifnum\countUTFz < "800\relax
+      \parseUTFviiiA,%
+      \parseUTFviiiB C\UTFviiiTwoOctetsName.,%
+    \else\ifnum\countUTFz < "10000\relax
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiB E\UTFviiiThreeOctetsName.{,;}%
+    \else
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiA!%
+      \parseUTFviiiB F\UTFviiiFourOctetsName.{!,;}%
+    \fi\fi\fi
+  }
+
+  % Extract a byte from the end of the UTF-8 representation of \countUTFx.
+  % It must be a non-initial byte in the sequence.
+  % Change \uccode of #1 for it to be used in \parseUTFviiiB as one
+  % of the bytes.
+  \gdef\parseUTFviiiA#1{%
+    \countUTFx = \countUTFz
+    \divide\countUTFz by 64
+    \countUTFy = \countUTFz  % Save to be the future value of \countUTFz.
+    \multiply\countUTFz by 64
+    
+    % \countUTFz is now \countUTFx with the last 5 bits cleared.  Subtract
+    % in order to get the last five bits.
+    \advance\countUTFx by -\countUTFz
+
+    % Convert this to the byte in the UTF-8 sequence.
+    \advance\countUTFx by 128
+    \uccode `#1\countUTFx
+    \countUTFz = \countUTFy}
+
+  % Used to put a UTF-8 byte sequence into \UTFviiiTmp
+  % #1 is the increment for \countUTFz to yield a the first byte of the UTF-8
+  %    sequence.
+  % #2 is one of the \UTFviii*OctetsName macros.
+  % #3 is always a full stop (.)
+  % #4 is a template for the other bytes in the sequence.  The values for these
+  %    bytes is substituted in here with \uppercase using the \uccode's.
+  \gdef\parseUTFviiiB#1#2#3#4{%
+    \advance\countUTFz by "#10\relax
+    \uccode `#3\countUTFz
+    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+% For native Unicode handling (XeTeX and LuaTeX),
+% provide a definition macro that sets a catcode to `other' non-globally
+%
+\def\DeclareUnicodeCharacterNativeOther#1#2{%
+  \catcode"#1=\other
+}
+
+% https://en.wikipedia.org/wiki/Plane_(Unicode)#Basic_M
+% U+0000..U+007F = https://en.wikipedia.org/wiki/Basic_Latin_(Unicode_block)
+% U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
+% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
+% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
+% 
+% Many of our renditions are less than wonderful, and all the missing
+% characters are available somewhere.  Loading the necessary fonts
+% awaits user request.  We can't truly support Unicode without
+% reimplementing everything that's been done in LaTeX for many years,
+% plus probably using luatex or xetex, and who knows what else.
+% We won't be doing that here in this simple file.  But we can try to at
+% least make most of the characters not bomb out.
+%
+\def\unicodechardefs{%
+  \DeclareUnicodeCharacter{00A0}{\tie}%
+  \DeclareUnicodeCharacter{00A1}{\exclamdown}%
+  \DeclareUnicodeCharacter{00A2}{{\tcfont \char162}}% 0242=cent
+  \DeclareUnicodeCharacter{00A3}{\pounds{}}%
+  \DeclareUnicodeCharacter{00A4}{{\tcfont \char164}}% 0244=currency
+  \DeclareUnicodeCharacter{00A5}{{\tcfont \char165}}% 0245=yen
+  \DeclareUnicodeCharacter{00A6}{{\tcfont \char166}}% 0246=brokenbar
+  \DeclareUnicodeCharacter{00A7}{\S}%
+  \DeclareUnicodeCharacter{00A8}{\"{ }}%
+  \DeclareUnicodeCharacter{00A9}{\copyright{}}%
+  \DeclareUnicodeCharacter{00AA}{\ordf}%
+  \DeclareUnicodeCharacter{00AB}{\guillemetleft{}}%
+  \DeclareUnicodeCharacter{00AC}{\ensuremath\lnot}%
+  \DeclareUnicodeCharacter{00AD}{\-}%
+  \DeclareUnicodeCharacter{00AE}{\registeredsymbol{}}%
+  \DeclareUnicodeCharacter{00AF}{\={ }}%
+  %
+  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}%
+  \DeclareUnicodeCharacter{00B1}{\ensuremath\pm}%
+  \DeclareUnicodeCharacter{00B2}{$^2$}%
+  \DeclareUnicodeCharacter{00B3}{$^3$}%
+  \DeclareUnicodeCharacter{00B4}{\'{ }}%
+  \DeclareUnicodeCharacter{00B5}{$\mu$}%
+  \DeclareUnicodeCharacter{00B6}{\P}%
+  \DeclareUnicodeCharacter{00B7}{\ensuremath\cdot}%
+  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}%
+  \DeclareUnicodeCharacter{00B9}{$^1$}%
+  \DeclareUnicodeCharacter{00BA}{\ordm}%
+  \DeclareUnicodeCharacter{00BB}{\guillemetright{}}%
+  \DeclareUnicodeCharacter{00BC}{$1\over4$}%
+  \DeclareUnicodeCharacter{00BD}{$1\over2$}%
+  \DeclareUnicodeCharacter{00BE}{$3\over4$}%
+  \DeclareUnicodeCharacter{00BF}{\questiondown}%
+  %
+  \DeclareUnicodeCharacter{00C0}{\`A}%
+  \DeclareUnicodeCharacter{00C1}{\'A}%
+  \DeclareUnicodeCharacter{00C2}{\^A}%
+  \DeclareUnicodeCharacter{00C3}{\~A}%
+  \DeclareUnicodeCharacter{00C4}{\"A}%
+  \DeclareUnicodeCharacter{00C5}{\AA}%
+  \DeclareUnicodeCharacter{00C6}{\AE}%
+  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}%
+  \DeclareUnicodeCharacter{00C8}{\`E}%
+  \DeclareUnicodeCharacter{00C9}{\'E}%
+  \DeclareUnicodeCharacter{00CA}{\^E}%
+  \DeclareUnicodeCharacter{00CB}{\"E}%
+  \DeclareUnicodeCharacter{00CC}{\`I}%
+  \DeclareUnicodeCharacter{00CD}{\'I}%
+  \DeclareUnicodeCharacter{00CE}{\^I}%
+  \DeclareUnicodeCharacter{00CF}{\"I}%
+  %
+  \DeclareUnicodeCharacter{00D0}{\DH}%
+  \DeclareUnicodeCharacter{00D1}{\~N}%
+  \DeclareUnicodeCharacter{00D2}{\`O}%
+  \DeclareUnicodeCharacter{00D3}{\'O}%
+  \DeclareUnicodeCharacter{00D4}{\^O}%
+  \DeclareUnicodeCharacter{00D5}{\~O}%
+  \DeclareUnicodeCharacter{00D6}{\"O}%
+  \DeclareUnicodeCharacter{00D7}{\ensuremath\times}%
+  \DeclareUnicodeCharacter{00D8}{\O}%
+  \DeclareUnicodeCharacter{00D9}{\`U}%
+  \DeclareUnicodeCharacter{00DA}{\'U}%
+  \DeclareUnicodeCharacter{00DB}{\^U}%
+  \DeclareUnicodeCharacter{00DC}{\"U}%
+  \DeclareUnicodeCharacter{00DD}{\'Y}%
+  \DeclareUnicodeCharacter{00DE}{\TH}%
+  \DeclareUnicodeCharacter{00DF}{\ss}%
+  %
+  \DeclareUnicodeCharacter{00E0}{\`a}%
+  \DeclareUnicodeCharacter{00E1}{\'a}%
+  \DeclareUnicodeCharacter{00E2}{\^a}%
+  \DeclareUnicodeCharacter{00E3}{\~a}%
+  \DeclareUnicodeCharacter{00E4}{\"a}%
+  \DeclareUnicodeCharacter{00E5}{\aa}%
+  \DeclareUnicodeCharacter{00E6}{\ae}%
+  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}%
+  \DeclareUnicodeCharacter{00E8}{\`e}%
+  \DeclareUnicodeCharacter{00E9}{\'e}%
+  \DeclareUnicodeCharacter{00EA}{\^e}%
+  \DeclareUnicodeCharacter{00EB}{\"e}%
+  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}%
+  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}%
+  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}%
+  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}%
+  %
+  \DeclareUnicodeCharacter{00F0}{\dh}%
+  \DeclareUnicodeCharacter{00F1}{\~n}%
+  \DeclareUnicodeCharacter{00F2}{\`o}%
+  \DeclareUnicodeCharacter{00F3}{\'o}%
+  \DeclareUnicodeCharacter{00F4}{\^o}%
+  \DeclareUnicodeCharacter{00F5}{\~o}%
+  \DeclareUnicodeCharacter{00F6}{\"o}%
+  \DeclareUnicodeCharacter{00F7}{\ensuremath\div}%
+  \DeclareUnicodeCharacter{00F8}{\o}%
+  \DeclareUnicodeCharacter{00F9}{\`u}%
+  \DeclareUnicodeCharacter{00FA}{\'u}%
+  \DeclareUnicodeCharacter{00FB}{\^u}%
+  \DeclareUnicodeCharacter{00FC}{\"u}%
+  \DeclareUnicodeCharacter{00FD}{\'y}%
+  \DeclareUnicodeCharacter{00FE}{\th}%
+  \DeclareUnicodeCharacter{00FF}{\"y}%
+  %
+  \DeclareUnicodeCharacter{0100}{\=A}%
+  \DeclareUnicodeCharacter{0101}{\=a}%
+  \DeclareUnicodeCharacter{0102}{\u{A}}%
+  \DeclareUnicodeCharacter{0103}{\u{a}}%
+  \DeclareUnicodeCharacter{0104}{\ogonek{A}}%
+  \DeclareUnicodeCharacter{0105}{\ogonek{a}}%
+  \DeclareUnicodeCharacter{0106}{\'C}%
+  \DeclareUnicodeCharacter{0107}{\'c}%
+  \DeclareUnicodeCharacter{0108}{\^C}%
+  \DeclareUnicodeCharacter{0109}{\^c}%
+  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}%
+  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}%
+  \DeclareUnicodeCharacter{010C}{\v{C}}%
+  \DeclareUnicodeCharacter{010D}{\v{c}}%
+  \DeclareUnicodeCharacter{010E}{\v{D}}%
+  \DeclareUnicodeCharacter{010F}{d'}%
+  %
+  \DeclareUnicodeCharacter{0110}{\DH}%
+  \DeclareUnicodeCharacter{0111}{\dh}%
+  \DeclareUnicodeCharacter{0112}{\=E}%
+  \DeclareUnicodeCharacter{0113}{\=e}%
+  \DeclareUnicodeCharacter{0114}{\u{E}}%
+  \DeclareUnicodeCharacter{0115}{\u{e}}%
+  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}%
+  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}%
+  \DeclareUnicodeCharacter{0118}{\ogonek{E}}%
+  \DeclareUnicodeCharacter{0119}{\ogonek{e}}%
+  \DeclareUnicodeCharacter{011A}{\v{E}}%
+  \DeclareUnicodeCharacter{011B}{\v{e}}%
+  \DeclareUnicodeCharacter{011C}{\^G}%
+  \DeclareUnicodeCharacter{011D}{\^g}%
+  \DeclareUnicodeCharacter{011E}{\u{G}}%
+  \DeclareUnicodeCharacter{011F}{\u{g}}%
+  %
+  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}%
+  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}%
+  \DeclareUnicodeCharacter{0122}{\cedilla{G}}%
+  \DeclareUnicodeCharacter{0123}{\cedilla{g}}%
+  \DeclareUnicodeCharacter{0124}{\^H}%
+  \DeclareUnicodeCharacter{0125}{\^h}%
+  \DeclareUnicodeCharacter{0126}{\missingcharmsg{H WITH STROKE}}%
+  \DeclareUnicodeCharacter{0127}{\missingcharmsg{h WITH STROKE}}%
+  \DeclareUnicodeCharacter{0128}{\~I}%
+  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}%
+  \DeclareUnicodeCharacter{012A}{\=I}%
+  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}%
+  \DeclareUnicodeCharacter{012C}{\u{I}}%
+  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}%
+  \DeclareUnicodeCharacter{012E}{\ogonek{I}}%
+  \DeclareUnicodeCharacter{012F}{\ogonek{i}}%
+  %
+  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}%
+  \DeclareUnicodeCharacter{0131}{\dotless{i}}%
+  \DeclareUnicodeCharacter{0132}{IJ}%
+  \DeclareUnicodeCharacter{0133}{ij}%
+  \DeclareUnicodeCharacter{0134}{\^J}%
+  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}%
+  \DeclareUnicodeCharacter{0136}{\cedilla{K}}%
+  \DeclareUnicodeCharacter{0137}{\cedilla{k}}%
+  \DeclareUnicodeCharacter{0138}{\ensuremath\kappa}%
+  \DeclareUnicodeCharacter{0139}{\'L}%
+  \DeclareUnicodeCharacter{013A}{\'l}%
+  \DeclareUnicodeCharacter{013B}{\cedilla{L}}%
+  \DeclareUnicodeCharacter{013C}{\cedilla{l}}%
+  \DeclareUnicodeCharacter{013D}{L'}% should kern
+  \DeclareUnicodeCharacter{013E}{l'}% should kern
+  \DeclareUnicodeCharacter{013F}{L\U{00B7}}%
+  %
+  \DeclareUnicodeCharacter{0140}{l\U{00B7}}%
+  \DeclareUnicodeCharacter{0141}{\L}%
+  \DeclareUnicodeCharacter{0142}{\l}%
+  \DeclareUnicodeCharacter{0143}{\'N}%
+  \DeclareUnicodeCharacter{0144}{\'n}%
+  \DeclareUnicodeCharacter{0145}{\cedilla{N}}%
+  \DeclareUnicodeCharacter{0146}{\cedilla{n}}%
+  \DeclareUnicodeCharacter{0147}{\v{N}}%
+  \DeclareUnicodeCharacter{0148}{\v{n}}%
+  \DeclareUnicodeCharacter{0149}{'n}%
+  \DeclareUnicodeCharacter{014A}{\missingcharmsg{ENG}}%
+  \DeclareUnicodeCharacter{014B}{\missingcharmsg{eng}}%
+  \DeclareUnicodeCharacter{014C}{\=O}%
+  \DeclareUnicodeCharacter{014D}{\=o}%
+  \DeclareUnicodeCharacter{014E}{\u{O}}%
+  \DeclareUnicodeCharacter{014F}{\u{o}}%
+  %
+  \DeclareUnicodeCharacter{0150}{\H{O}}%
+  \DeclareUnicodeCharacter{0151}{\H{o}}%
+  \DeclareUnicodeCharacter{0152}{\OE}%
+  \DeclareUnicodeCharacter{0153}{\oe}%
+  \DeclareUnicodeCharacter{0154}{\'R}%
+  \DeclareUnicodeCharacter{0155}{\'r}%
+  \DeclareUnicodeCharacter{0156}{\cedilla{R}}%
+  \DeclareUnicodeCharacter{0157}{\cedilla{r}}%
+  \DeclareUnicodeCharacter{0158}{\v{R}}%
+  \DeclareUnicodeCharacter{0159}{\v{r}}%
+  \DeclareUnicodeCharacter{015A}{\'S}%
+  \DeclareUnicodeCharacter{015B}{\'s}%
+  \DeclareUnicodeCharacter{015C}{\^S}%
+  \DeclareUnicodeCharacter{015D}{\^s}%
+  \DeclareUnicodeCharacter{015E}{\cedilla{S}}%
+  \DeclareUnicodeCharacter{015F}{\cedilla{s}}%
+  %
+  \DeclareUnicodeCharacter{0160}{\v{S}}%
+  \DeclareUnicodeCharacter{0161}{\v{s}}%
+  \DeclareUnicodeCharacter{0162}{\cedilla{T}}%
+  \DeclareUnicodeCharacter{0163}{\cedilla{t}}%
+  \DeclareUnicodeCharacter{0164}{\v{T}}%
+  \DeclareUnicodeCharacter{0165}{\v{t}}%
+  \DeclareUnicodeCharacter{0166}{\missingcharmsg{H WITH STROKE}}%
+  \DeclareUnicodeCharacter{0167}{\missingcharmsg{h WITH STROKE}}%
+  \DeclareUnicodeCharacter{0168}{\~U}%
+  \DeclareUnicodeCharacter{0169}{\~u}%
+  \DeclareUnicodeCharacter{016A}{\=U}%
+  \DeclareUnicodeCharacter{016B}{\=u}%
+  \DeclareUnicodeCharacter{016C}{\u{U}}%
+  \DeclareUnicodeCharacter{016D}{\u{u}}%
+  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}%
+  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}%
+  %
+  \DeclareUnicodeCharacter{0170}{\H{U}}%
+  \DeclareUnicodeCharacter{0171}{\H{u}}%
+  \DeclareUnicodeCharacter{0172}{\ogonek{U}}%
+  \DeclareUnicodeCharacter{0173}{\ogonek{u}}%
+  \DeclareUnicodeCharacter{0174}{\^W}%
+  \DeclareUnicodeCharacter{0175}{\^w}%
+  \DeclareUnicodeCharacter{0176}{\^Y}%
+  \DeclareUnicodeCharacter{0177}{\^y}%
+  \DeclareUnicodeCharacter{0178}{\"Y}%
+  \DeclareUnicodeCharacter{0179}{\'Z}%
+  \DeclareUnicodeCharacter{017A}{\'z}%
+  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}%
+  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}%
+  \DeclareUnicodeCharacter{017D}{\v{Z}}%
+  \DeclareUnicodeCharacter{017E}{\v{z}}%
+  \DeclareUnicodeCharacter{017F}{\missingcharmsg{LONG S}}%
+  %
+  \DeclareUnicodeCharacter{01C4}{D\v{Z}}%
+  \DeclareUnicodeCharacter{01C5}{D\v{z}}%
+  \DeclareUnicodeCharacter{01C6}{d\v{z}}%
+  \DeclareUnicodeCharacter{01C7}{LJ}%
+  \DeclareUnicodeCharacter{01C8}{Lj}%
+  \DeclareUnicodeCharacter{01C9}{lj}%
+  \DeclareUnicodeCharacter{01CA}{NJ}%
+  \DeclareUnicodeCharacter{01CB}{Nj}%
+  \DeclareUnicodeCharacter{01CC}{nj}%
+  \DeclareUnicodeCharacter{01CD}{\v{A}}%
+  \DeclareUnicodeCharacter{01CE}{\v{a}}%
+  \DeclareUnicodeCharacter{01CF}{\v{I}}%
+  %
+  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}%
+  \DeclareUnicodeCharacter{01D1}{\v{O}}%
+  \DeclareUnicodeCharacter{01D2}{\v{o}}%
+  \DeclareUnicodeCharacter{01D3}{\v{U}}%
+  \DeclareUnicodeCharacter{01D4}{\v{u}}%
+  %
+  \DeclareUnicodeCharacter{01E2}{\={\AE}}%
+  \DeclareUnicodeCharacter{01E3}{\={\ae}}%
+  \DeclareUnicodeCharacter{01E6}{\v{G}}%
+  \DeclareUnicodeCharacter{01E7}{\v{g}}%
+  \DeclareUnicodeCharacter{01E8}{\v{K}}%
+  \DeclareUnicodeCharacter{01E9}{\v{k}}%
+  %
+  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}%
+  \DeclareUnicodeCharacter{01F1}{DZ}%
+  \DeclareUnicodeCharacter{01F2}{Dz}%
+  \DeclareUnicodeCharacter{01F3}{dz}%
+  \DeclareUnicodeCharacter{01F4}{\'G}%
+  \DeclareUnicodeCharacter{01F5}{\'g}%
+  \DeclareUnicodeCharacter{01F8}{\`N}%
+  \DeclareUnicodeCharacter{01F9}{\`n}%
+  \DeclareUnicodeCharacter{01FC}{\'{\AE}}%
+  \DeclareUnicodeCharacter{01FD}{\'{\ae}}%
+  \DeclareUnicodeCharacter{01FE}{\'{\O}}%
+  \DeclareUnicodeCharacter{01FF}{\'{\o}}%
+  %
+  \DeclareUnicodeCharacter{021E}{\v{H}}%
+  \DeclareUnicodeCharacter{021F}{\v{h}}%
+  %
+  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}%
+  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}%
+  \DeclareUnicodeCharacter{0228}{\cedilla{E}}%
+  \DeclareUnicodeCharacter{0229}{\cedilla{e}}%
+  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}%
+  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}%
+  %
+  \DeclareUnicodeCharacter{0232}{\=Y}%
+  \DeclareUnicodeCharacter{0233}{\=y}%
+  \DeclareUnicodeCharacter{0237}{\dotless{j}}%
+  %
+  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}%
+  %
+  % Greek letters upper case
+  \DeclareUnicodeCharacter{0391}{{\it A}}%
+  \DeclareUnicodeCharacter{0392}{{\it B}}%
+  \DeclareUnicodeCharacter{0393}{\ensuremath{\mit\Gamma}}%
+  \DeclareUnicodeCharacter{0394}{\ensuremath{\mit\Delta}}%
+  \DeclareUnicodeCharacter{0395}{{\it E}}%
+  \DeclareUnicodeCharacter{0396}{{\it Z}}%
+  \DeclareUnicodeCharacter{0397}{{\it H}}%
+  \DeclareUnicodeCharacter{0398}{\ensuremath{\mit\Theta}}%
+  \DeclareUnicodeCharacter{0399}{{\it I}}%
+  \DeclareUnicodeCharacter{039A}{{\it K}}%
+  \DeclareUnicodeCharacter{039B}{\ensuremath{\mit\Lambda}}%
+  \DeclareUnicodeCharacter{039C}{{\it M}}%
+  \DeclareUnicodeCharacter{039D}{{\it N}}%
+  \DeclareUnicodeCharacter{039E}{\ensuremath{\mit\Xi}}%
+  \DeclareUnicodeCharacter{039F}{{\it O}}%
+  \DeclareUnicodeCharacter{03A0}{\ensuremath{\mit\Pi}}%
+  \DeclareUnicodeCharacter{03A1}{{\it P}}%
+  %\DeclareUnicodeCharacter{03A2}{} % none - corresponds to final sigma
+  \DeclareUnicodeCharacter{03A3}{\ensuremath{\mit\Sigma}}%
+  \DeclareUnicodeCharacter{03A4}{{\it T}}%
+  \DeclareUnicodeCharacter{03A5}{\ensuremath{\mit\Upsilon}}%
+  \DeclareUnicodeCharacter{03A6}{\ensuremath{\mit\Phi}}%
+  \DeclareUnicodeCharacter{03A7}{{\it X}}%
+  \DeclareUnicodeCharacter{03A8}{\ensuremath{\mit\Psi}}%
+  \DeclareUnicodeCharacter{03A9}{\ensuremath{\mit\Omega}}%
+  %
+  % Vowels with accents
+  \DeclareUnicodeCharacter{0390}{\ensuremath{\ddot{\acute\iota}}}%
+  \DeclareUnicodeCharacter{03AC}{\ensuremath{\acute\alpha}}%
+  \DeclareUnicodeCharacter{03AD}{\ensuremath{\acute\epsilon}}%
+  \DeclareUnicodeCharacter{03AE}{\ensuremath{\acute\eta}}%
+  \DeclareUnicodeCharacter{03AF}{\ensuremath{\acute\iota}}%
+  \DeclareUnicodeCharacter{03B0}{\ensuremath{\acute{\ddot\upsilon}}}%
+  %
+  % Standalone accent
+  \DeclareUnicodeCharacter{0384}{\ensuremath{\acute{\ }}}%
+  %
+  % Greek letters lower case
+  \DeclareUnicodeCharacter{03B1}{\ensuremath\alpha}%
+  \DeclareUnicodeCharacter{03B2}{\ensuremath\beta}%
+  \DeclareUnicodeCharacter{03B3}{\ensuremath\gamma}%
+  \DeclareUnicodeCharacter{03B4}{\ensuremath\delta}%
+  \DeclareUnicodeCharacter{03B5}{\ensuremath\epsilon}%
+  \DeclareUnicodeCharacter{03B6}{\ensuremath\zeta}%
+  \DeclareUnicodeCharacter{03B7}{\ensuremath\eta}%
+  \DeclareUnicodeCharacter{03B8}{\ensuremath\theta}%
+  \DeclareUnicodeCharacter{03B9}{\ensuremath\iota}%
+  \DeclareUnicodeCharacter{03BA}{\ensuremath\kappa}%
+  \DeclareUnicodeCharacter{03BB}{\ensuremath\lambda}%
+  \DeclareUnicodeCharacter{03BC}{\ensuremath\mu}%
+  \DeclareUnicodeCharacter{03BD}{\ensuremath\nu}%
+  \DeclareUnicodeCharacter{03BE}{\ensuremath\xi}%
+  \DeclareUnicodeCharacter{03BF}{{\it o}}% omicron
+  \DeclareUnicodeCharacter{03C0}{\ensuremath\pi}%
+  \DeclareUnicodeCharacter{03C1}{\ensuremath\rho}%
+  \DeclareUnicodeCharacter{03C2}{\ensuremath\varsigma}%
+  \DeclareUnicodeCharacter{03C3}{\ensuremath\sigma}%
+  \DeclareUnicodeCharacter{03C4}{\ensuremath\tau}%
+  \DeclareUnicodeCharacter{03C5}{\ensuremath\upsilon}%
+  \DeclareUnicodeCharacter{03C6}{\ensuremath\phi}%
+  \DeclareUnicodeCharacter{03C7}{\ensuremath\chi}%
+  \DeclareUnicodeCharacter{03C8}{\ensuremath\psi}%
+  \DeclareUnicodeCharacter{03C9}{\ensuremath\omega}%
+  %
+  % More Greek vowels with accents
+  \DeclareUnicodeCharacter{03CA}{\ensuremath{\ddot\iota}}%
+  \DeclareUnicodeCharacter{03CB}{\ensuremath{\ddot\upsilon}}%
+  \DeclareUnicodeCharacter{03CC}{\ensuremath{\acute o}}%
+  \DeclareUnicodeCharacter{03CD}{\ensuremath{\acute\upsilon}}%
+  \DeclareUnicodeCharacter{03CE}{\ensuremath{\acute\omega}}%
+  %
+  % Variant Greek letters
+  \DeclareUnicodeCharacter{03D1}{\ensuremath\vartheta}%
+  \DeclareUnicodeCharacter{03D6}{\ensuremath\varpi}%
+  \DeclareUnicodeCharacter{03F1}{\ensuremath\varrho}%
+  %
+  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}%
+  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}%
+  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}%
+  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}%
+  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}%
+  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}%
+  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}%
+  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}%
+  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}%
+  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}%
+  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}%
+  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}%
+  %
+  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}%
+  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}%
+  %
+  \DeclareUnicodeCharacter{1E20}{\=G}%
+  \DeclareUnicodeCharacter{1E21}{\=g}%
+  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}%
+  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}%
+  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}%
+  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}%
+  \DeclareUnicodeCharacter{1E26}{\"H}%
+  \DeclareUnicodeCharacter{1E27}{\"h}%
+  %
+  \DeclareUnicodeCharacter{1E30}{\'K}%
+  \DeclareUnicodeCharacter{1E31}{\'k}%
+  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}%
+  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}%
+  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}%
+  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}%
+  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}%
+  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}%
+  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}%
+  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}%
+  \DeclareUnicodeCharacter{1E3E}{\'M}%
+  \DeclareUnicodeCharacter{1E3F}{\'m}%
+  %
+  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}%
+  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}%
+  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}%
+  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}%
+  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}%
+  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}%
+  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}%
+  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}%
+  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}%
+  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}%
+  %
+  \DeclareUnicodeCharacter{1E54}{\'P}%
+  \DeclareUnicodeCharacter{1E55}{\'p}%
+  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}%
+  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}%
+  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}%
+  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}%
+  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}%
+  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}%
+  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}%
+  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}%
+  %
+  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}%
+  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}%
+  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}%
+  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}%
+  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}%
+  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}%
+  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}%
+  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}%
+  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}%
+  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}%
+  %
+  \DeclareUnicodeCharacter{1E7C}{\~V}%
+  \DeclareUnicodeCharacter{1E7D}{\~v}%
+  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}%
+  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}%
+  %
+  \DeclareUnicodeCharacter{1E80}{\`W}%
+  \DeclareUnicodeCharacter{1E81}{\`w}%
+  \DeclareUnicodeCharacter{1E82}{\'W}%
+  \DeclareUnicodeCharacter{1E83}{\'w}%
+  \DeclareUnicodeCharacter{1E84}{\"W}%
+  \DeclareUnicodeCharacter{1E85}{\"w}%
+  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}%
+  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}%
+  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}%
+  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}%
+  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}%
+  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}%
+  \DeclareUnicodeCharacter{1E8C}{\"X}%
+  \DeclareUnicodeCharacter{1E8D}{\"x}%
+  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}%
+  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}%
+  %
+  \DeclareUnicodeCharacter{1E90}{\^Z}%
+  \DeclareUnicodeCharacter{1E91}{\^z}%
+  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}%
+  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}%
+  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}%
+  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}%
+  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}%
+  \DeclareUnicodeCharacter{1E97}{\"t}%
+  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}%
+  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}%
+  %
+  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}%
+  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}%
+  %
+  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}%
+  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}%
+  \DeclareUnicodeCharacter{1EBC}{\~E}%
+  \DeclareUnicodeCharacter{1EBD}{\~e}%
+  %
+  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}%
+  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}%
+  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}%
+  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}%
+  %
+  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}%
+  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}%
+  %
+  \DeclareUnicodeCharacter{1EF2}{\`Y}%
+  \DeclareUnicodeCharacter{1EF3}{\`y}%
+  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}%
+  %
+  \DeclareUnicodeCharacter{1EF8}{\~Y}%
+  \DeclareUnicodeCharacter{1EF9}{\~y}%
+  %
+  % Punctuation
+  \DeclareUnicodeCharacter{2013}{--}%
+  \DeclareUnicodeCharacter{2014}{---}%
+  \DeclareUnicodeCharacter{2018}{\quoteleft{}}%
+  \DeclareUnicodeCharacter{2019}{\quoteright{}}%
+  \DeclareUnicodeCharacter{201A}{\quotesinglbase{}}%
+  \DeclareUnicodeCharacter{201C}{\quotedblleft{}}%
+  \DeclareUnicodeCharacter{201D}{\quotedblright{}}%
+  \DeclareUnicodeCharacter{201E}{\quotedblbase{}}%
+  \DeclareUnicodeCharacter{2020}{\ensuremath\dagger}%
+  \DeclareUnicodeCharacter{2021}{\ensuremath\ddagger}%
+  \DeclareUnicodeCharacter{2022}{\bullet{}}%
+  \DeclareUnicodeCharacter{202F}{\thinspace}%
+  \DeclareUnicodeCharacter{2026}{\dots{}}%
+  \DeclareUnicodeCharacter{2039}{\guilsinglleft{}}%
+  \DeclareUnicodeCharacter{203A}{\guilsinglright{}}%
+  %
+  \DeclareUnicodeCharacter{20AC}{\euro{}}%
+  %
+  \DeclareUnicodeCharacter{2192}{\expansion{}}%
+  \DeclareUnicodeCharacter{21D2}{\result{}}%
+  %
+  % Mathematical symbols
+  \DeclareUnicodeCharacter{2200}{\ensuremath\forall}%
+  \DeclareUnicodeCharacter{2203}{\ensuremath\exists}%
+  \DeclareUnicodeCharacter{2208}{\ensuremath\in}%
+  \DeclareUnicodeCharacter{2212}{\minus{}}%
+  \DeclareUnicodeCharacter{2217}{\ast}%
+  \DeclareUnicodeCharacter{221E}{\ensuremath\infty}%
+  \DeclareUnicodeCharacter{2225}{\ensuremath\parallel}%
+  \DeclareUnicodeCharacter{2227}{\ensuremath\wedge}%
+  \DeclareUnicodeCharacter{2229}{\ensuremath\cap}%
+  \DeclareUnicodeCharacter{2261}{\equiv{}}%
+  \DeclareUnicodeCharacter{2264}{\ensuremath\leq}%
+  \DeclareUnicodeCharacter{2265}{\ensuremath\geq}%
+  \DeclareUnicodeCharacter{2282}{\ensuremath\subset}%
+  \DeclareUnicodeCharacter{2287}{\ensuremath\supseteq}%
+  %
+  \DeclareUnicodeCharacter{2016}{\ensuremath\Vert}%
+  \DeclareUnicodeCharacter{2032}{\ensuremath\prime}%
+  \DeclareUnicodeCharacter{210F}{\ensuremath\hbar}%
+  \DeclareUnicodeCharacter{2111}{\ensuremath\Im}%
+  \DeclareUnicodeCharacter{2113}{\ensuremath\ell}%
+  \DeclareUnicodeCharacter{2118}{\ensuremath\wp}%
+  \DeclareUnicodeCharacter{211C}{\ensuremath\Re}%
+  \DeclareUnicodeCharacter{2127}{\ensuremath\mho}%
+  \DeclareUnicodeCharacter{2135}{\ensuremath\aleph}%
+  \DeclareUnicodeCharacter{2190}{\ensuremath\leftarrow}%
+  \DeclareUnicodeCharacter{2191}{\ensuremath\uparrow}%
+  \DeclareUnicodeCharacter{2193}{\ensuremath\downarrow}%
+  \DeclareUnicodeCharacter{2194}{\ensuremath\leftrightarrow}%
+  \DeclareUnicodeCharacter{2195}{\ensuremath\updownarrow}%
+  \DeclareUnicodeCharacter{2196}{\ensuremath\nwarrow}%
+  \DeclareUnicodeCharacter{2197}{\ensuremath\nearrow}%
+  \DeclareUnicodeCharacter{2198}{\ensuremath\searrow}%
+  \DeclareUnicodeCharacter{2199}{\ensuremath\swarrow}%
+  \DeclareUnicodeCharacter{21A6}{\ensuremath\mapsto}%
+  \DeclareUnicodeCharacter{21A9}{\ensuremath\hookleftarrow}%
+  \DeclareUnicodeCharacter{21AA}{\ensuremath\hookrightarrow}%
+  \DeclareUnicodeCharacter{21BC}{\ensuremath\leftharpoonup}%
+  \DeclareUnicodeCharacter{21BD}{\ensuremath\leftharpoondown}%
+  \DeclareUnicodeCharacter{21BE}{\ensuremath\upharpoonright}%
+  \DeclareUnicodeCharacter{21C0}{\ensuremath\rightharpoonup}%
+  \DeclareUnicodeCharacter{21C1}{\ensuremath\rightharpoondown}%
+  \DeclareUnicodeCharacter{21CC}{\ensuremath\rightleftharpoons}%
+  \DeclareUnicodeCharacter{21D0}{\ensuremath\Leftarrow}%
+  \DeclareUnicodeCharacter{21D1}{\ensuremath\Uparrow}%
+  \DeclareUnicodeCharacter{21D3}{\ensuremath\Downarrow}%
+  \DeclareUnicodeCharacter{21D4}{\ensuremath\Leftrightarrow}%
+  \DeclareUnicodeCharacter{21D5}{\ensuremath\Updownarrow}%
+  \DeclareUnicodeCharacter{21DD}{\ensuremath\leadsto}%
+  \DeclareUnicodeCharacter{2201}{\ensuremath\complement}%
+  \DeclareUnicodeCharacter{2202}{\ensuremath\partial}%
+  \DeclareUnicodeCharacter{2205}{\ensuremath\emptyset}%
+  \DeclareUnicodeCharacter{2207}{\ensuremath\nabla}%
+  \DeclareUnicodeCharacter{2209}{\ensuremath\notin}%
+  \DeclareUnicodeCharacter{220B}{\ensuremath\owns}%
+  \DeclareUnicodeCharacter{220F}{\ensuremath\prod}%
+  \DeclareUnicodeCharacter{2210}{\ensuremath\coprod}%
+  \DeclareUnicodeCharacter{2211}{\ensuremath\sum}%
+  \DeclareUnicodeCharacter{2213}{\ensuremath\mp}%
+  \DeclareUnicodeCharacter{2218}{\ensuremath\circ}%
+  \DeclareUnicodeCharacter{221A}{\ensuremath\surd}%
+  \DeclareUnicodeCharacter{221D}{\ensuremath\propto}%
+  \DeclareUnicodeCharacter{2220}{\ensuremath\angle}%
+  \DeclareUnicodeCharacter{2223}{\ensuremath\mid}%
+  \DeclareUnicodeCharacter{2228}{\ensuremath\vee}%
+  \DeclareUnicodeCharacter{222A}{\ensuremath\cup}%
+  \DeclareUnicodeCharacter{222B}{\ensuremath\smallint}%
+  \DeclareUnicodeCharacter{222E}{\ensuremath\oint}%
+  \DeclareUnicodeCharacter{223C}{\ensuremath\sim}%
+  \DeclareUnicodeCharacter{2240}{\ensuremath\wr}%
+  \DeclareUnicodeCharacter{2243}{\ensuremath\simeq}%
+  \DeclareUnicodeCharacter{2245}{\ensuremath\cong}%
+  \DeclareUnicodeCharacter{2248}{\ensuremath\approx}%
+  \DeclareUnicodeCharacter{224D}{\ensuremath\asymp}%
+  \DeclareUnicodeCharacter{2250}{\ensuremath\doteq}%
+  \DeclareUnicodeCharacter{2260}{\ensuremath\neq}%
+  \DeclareUnicodeCharacter{226A}{\ensuremath\ll}%
+  \DeclareUnicodeCharacter{226B}{\ensuremath\gg}%
+  \DeclareUnicodeCharacter{227A}{\ensuremath\prec}%
+  \DeclareUnicodeCharacter{227B}{\ensuremath\succ}%
+  \DeclareUnicodeCharacter{2283}{\ensuremath\supset}%
+  \DeclareUnicodeCharacter{2286}{\ensuremath\subseteq}%
+  \DeclareUnicodeCharacter{228E}{\ensuremath\uplus}%
+  \DeclareUnicodeCharacter{228F}{\ensuremath\sqsubset}%
+  \DeclareUnicodeCharacter{2290}{\ensuremath\sqsupset}%
+  \DeclareUnicodeCharacter{2291}{\ensuremath\sqsubseteq}%
+  \DeclareUnicodeCharacter{2292}{\ensuremath\sqsupseteq}%
+  \DeclareUnicodeCharacter{2293}{\ensuremath\sqcap}%
+  \DeclareUnicodeCharacter{2294}{\ensuremath\sqcup}%
+  \DeclareUnicodeCharacter{2295}{\ensuremath\oplus}%
+  \DeclareUnicodeCharacter{2296}{\ensuremath\ominus}%
+  \DeclareUnicodeCharacter{2297}{\ensuremath\otimes}%
+  \DeclareUnicodeCharacter{2298}{\ensuremath\oslash}%
+  \DeclareUnicodeCharacter{2299}{\ensuremath\odot}%
+  \DeclareUnicodeCharacter{22A2}{\ensuremath\vdash}%
+  \DeclareUnicodeCharacter{22A3}{\ensuremath\dashv}%
+  \DeclareUnicodeCharacter{22A4}{\ensuremath\ptextop}%
+  \DeclareUnicodeCharacter{22A5}{\ensuremath\bot}%
+  \DeclareUnicodeCharacter{22A8}{\ensuremath\models}%
+  \DeclareUnicodeCharacter{22B4}{\ensuremath\unlhd}%
+  \DeclareUnicodeCharacter{22B5}{\ensuremath\unrhd}%
+  \DeclareUnicodeCharacter{22C0}{\ensuremath\bigwedge}%
+  \DeclareUnicodeCharacter{22C1}{\ensuremath\bigvee}%
+  \DeclareUnicodeCharacter{22C2}{\ensuremath\bigcap}%
+  \DeclareUnicodeCharacter{22C3}{\ensuremath\bigcup}%
+  \DeclareUnicodeCharacter{22C4}{\ensuremath\diamond}%
+  \DeclareUnicodeCharacter{22C5}{\ensuremath\cdot}%
+  \DeclareUnicodeCharacter{22C6}{\ensuremath\star}%
+  \DeclareUnicodeCharacter{22C8}{\ensuremath\bowtie}%
+  \DeclareUnicodeCharacter{2308}{\ensuremath\lceil}%
+  \DeclareUnicodeCharacter{2309}{\ensuremath\rceil}%
+  \DeclareUnicodeCharacter{230A}{\ensuremath\lfloor}%
+  \DeclareUnicodeCharacter{230B}{\ensuremath\rfloor}%
+  \DeclareUnicodeCharacter{2322}{\ensuremath\frown}%
+  \DeclareUnicodeCharacter{2323}{\ensuremath\smile}%
+  %
+  \DeclareUnicodeCharacter{25A1}{\ensuremath\Box}%
+  \DeclareUnicodeCharacter{25B3}{\ensuremath\triangle}%
+  \DeclareUnicodeCharacter{25B7}{\ensuremath\triangleright}%
+  \DeclareUnicodeCharacter{25BD}{\ensuremath\bigtriangledown}%
+  \DeclareUnicodeCharacter{25C1}{\ensuremath\triangleleft}%
+  \DeclareUnicodeCharacter{25C7}{\ensuremath\Diamond}%
+  \DeclareUnicodeCharacter{2660}{\ensuremath\spadesuit}%
+  \DeclareUnicodeCharacter{2661}{\ensuremath\heartsuit}%
+  \DeclareUnicodeCharacter{2662}{\ensuremath\diamondsuit}%
+  \DeclareUnicodeCharacter{2663}{\ensuremath\clubsuit}%
+  \DeclareUnicodeCharacter{266D}{\ensuremath\flat}%
+  \DeclareUnicodeCharacter{266E}{\ensuremath\natural}%
+  \DeclareUnicodeCharacter{266F}{\ensuremath\sharp}%
+  \DeclareUnicodeCharacter{26AA}{\ensuremath\bigcirc}%
+  \DeclareUnicodeCharacter{27B9}{\ensuremath\rangle}%
+  \DeclareUnicodeCharacter{27C2}{\ensuremath\perp}%
+  \DeclareUnicodeCharacter{27E8}{\ensuremath\langle}%
+  \DeclareUnicodeCharacter{27F5}{\ensuremath\longleftarrow}%
+  \DeclareUnicodeCharacter{27F6}{\ensuremath\longrightarrow}%
+  \DeclareUnicodeCharacter{27F7}{\ensuremath\longleftrightarrow}%
+  \DeclareUnicodeCharacter{27FC}{\ensuremath\longmapsto}%
+  \DeclareUnicodeCharacter{29F5}{\ensuremath\setminus}%
+  \DeclareUnicodeCharacter{2A00}{\ensuremath\bigodot}%
+  \DeclareUnicodeCharacter{2A01}{\ensuremath\bigoplus}%
+  \DeclareUnicodeCharacter{2A02}{\ensuremath\bigotimes}%
+  \DeclareUnicodeCharacter{2A04}{\ensuremath\biguplus}%
+  \DeclareUnicodeCharacter{2A06}{\ensuremath\bigsqcup}%
+  \DeclareUnicodeCharacter{2A1D}{\ensuremath\Join}%
+  \DeclareUnicodeCharacter{2A3F}{\ensuremath\amalg}%
+  \DeclareUnicodeCharacter{2AAF}{\ensuremath\preceq}%
+  \DeclareUnicodeCharacter{2AB0}{\ensuremath\succeq}%
+  %
+  \global\mathchardef\checkmark="1370% actually the square root sign
+  \DeclareUnicodeCharacter{2713}{\ensuremath\checkmark}%
+}% end of \unicodechardefs
+
+% UTF-8 byte sequence (pdfTeX) definitions (replacing and @U command)
+% It makes the setting that replace UTF-8 byte sequence.
+\def\utfeightchardefs{%
+  \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterUTFviii
+  \unicodechardefs
+}
+
+% Whether the active definitions of non-ASCII characters expand to
+% non-active tokens with the same character code.  This is used to
+% write characters literally, instead of using active definitions for
+% printing the correct glyphs.
+\newif\ifpassthroughchars
+\passthroughcharsfalse
+
+% For native Unicode handling (XeTeX and LuaTeX),
+% provide a definition macro to replace/pass-through a Unicode character
+%
+\def\DeclareUnicodeCharacterNative#1#2{%
+  \catcode"#1=\active
+  \def\dodeclareunicodecharacternative##1##2##3{%
+    \begingroup
+      \uccode`\~="##2\relax
+      \uppercase{\gdef~}{%
+        \ifpassthroughchars
+          ##1%
+        \else
+          ##3%
+        \fi
+      }
+    \endgroup
+  }
+  \begingroup
+    \uccode`\.="#1\relax
+    \uppercase{\def\UTFNativeTmp{.}}%
+    \expandafter\dodeclareunicodecharacternative\UTFNativeTmp{#1}{#2}%
+  \endgroup
+}
+
+% Native Unicode handling (XeTeX and LuaTeX) character replacing definition.
+% It activates the setting that replaces Unicode characters.
+\def\nativeunicodechardefs{%
+  \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterNative
+  \unicodechardefs
+}
+
+% For native Unicode handling (XeTeX and LuaTeX),
+% make the character token expand
+% to the sequences given in \unicodechardefs for printing.
+\def\DeclareUnicodeCharacterNativeAtU#1#2{%
+  \def\UTFAtUTmp{#2}
+  \expandafter\globallet\csname uni:#1\endcsname \UTFAtUTmp
+}
+
+% @U command definitions for native Unicode handling (XeTeX and LuaTeX).
+\def\nativeunicodechardefsatu{%
+  \let\DeclareUnicodeCharacter\DeclareUnicodeCharacterNativeAtU
+  \unicodechardefs
+}
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+   \relax
+}
+
+% define all Unicode characters we know about, for the sake of @U.
+\iftxinativeunicodecapable
+  \nativeunicodechardefsatu
+\else
+  \utfeightchardefs
+\fi
+
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be very finicky about underfull hboxes, either.
+\hbadness = 6666
+
+% Following George Bush, get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything.  We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize.  We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+  \ifx\emergencystretch\thisisundefined
+    % Allow us to assign to \emergencystretch anyway.
+    \def\emergencystretch{\dimen0}%
+  \else
+    \emergencystretch = .15\hsize
+  \fi
+}
+
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading.  The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+  \voffset = #3\relax
+  \topskip = #6\relax
+  \splittopskip = \topskip
+  %
+  \vsize = #1\relax
+  \advance\vsize by \topskip
+  \outervsize = \vsize
+  \advance\outervsize by 2\topandbottommargin
+  \txipageheight = \vsize
+  %
+  \hsize = #2\relax
+  \outerhsize = \hsize
+  \advance\outerhsize by 0.5in
+  \txipagewidth = \hsize
+  %
+  \normaloffset = #4\relax
+  \bindingoffset = #5\relax
+  %
+  \ifpdf
+    \pdfpageheight #7\relax
+    \pdfpagewidth #8\relax
+    % if we don't reset these, they will remain at "1 true in" of
+    % whatever layout pdftex was dumped with.
+    \pdfhorigin = 1 true in
+    \pdfvorigin = 1 true in
+  \else
+    \ifx\XeTeXrevision\thisisundefined
+    \else
+      \pdfpageheight #7\relax
+      \pdfpagewidth #8\relax
+      % XeTeX does not have \pdfhorigin and \pdfvorigin.
+    \fi
+  \fi
+  %
+  \setleading{\textleading}
+  %
+  \parindent = \defaultparindent
+  \setemergencystretch
+}
+
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % If page is nothing but text, make it come out even.
+  \internalpagesizes{607.2pt}{6in}% that's 46 lines
+                    {\voffset}{.25in}%
+                    {\bindingoffset}{36pt}%
+                    {11in}{8.5in}%
+}}
+
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+  \parskip = 2pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.5in}{5in}%
+                    {-.2in}{0in}%
+                    {\bindingoffset}{16pt}%
+                    {9.25in}{7in}%
+  %
+  \lispnarrowing = 0.3in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .5cm
+}}
+
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % Double-side printing via postscript on Laserjet 4050
+  % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+  % To change the settings for a different printer or situation, adjust
+  % \normaloffset until the front-side and back-side texts align.  Then
+  % do the same for \bindingoffset.  You can set these for testing in
+  % your texinfo source file like this:
+  % @tex
+  % \global\normaloffset = -6mm
+  % \global\bindingoffset = 10mm
+  % @end tex
+  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{44pt}%
+                    {297mm}{210mm}%
+  %
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 5mm
+}}
+
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+  \parskip = 2pt plus 1pt minus 0.1pt
+  \textleading = 12.5pt
+  %
+  \internalpagesizes{160mm}{120mm}%
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{8pt}%
+                    {210mm}{148mm}%
+  %
+  \lispnarrowing = 0.2in
+  \tolerance = 800
+  \hfuzz = 1.2pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 2mm
+  \tableindent = 12mm
+}}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{237mm}{150mm}%
+                    {\voffset}{4.6mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  %
+  % Must explicitly reset to 0 because we call \afourpaper.
+  \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{241mm}{165mm}%
+                    {\voffset}{-2.95mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+  \globaldefs = 1
+  %
+  \parskip = 3pt plus 2pt minus 1pt
+  \setleading{\textleading}%
+  %
+  \dimen0 = #1\relax
+  \advance\dimen0 by \voffset
+  %
+  \dimen2 = \hsize
+  \advance\dimen2 by \normaloffset
+  %
+  \internalpagesizes{#1}{\hsize}%
+                    {\voffset}{\normaloffset}%
+                    {\bindingoffset}{44pt}%
+                    {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
+
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other \def\normaldoublequote{"}
+\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
+\catcode`\+=\other \def\normalplus{+}
+\catcode`\<=\other \def\normalless{<}
+\catcode`\>=\other \def\normalgreater{>}
+\catcode`\^=\other \def\normalcaret{^}
+\catcode`\_=\other \def\normalunderscore{_}
+\catcode`\|=\other \def\normalverticalbar{|}
+\catcode`\~=\other \def\normaltilde{~}
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise.  Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font.  Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts.  But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
+% Set catcodes for Texinfo file
+
+% Active characters for printing the wanted glyph.
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
+%
+\catcode`\"=\active
+\def\activedoublequote{{\tt\char34}}
+\let"=\activedoublequote
+\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde
+\chardef\hatchar=`\^
+\catcode`\^=\active \def\activehat{{\tt \hatchar}} \let^ = \activehat
+
+\catcode`\_=\active
+\def_{\ifusingtt\normalunderscore\_}
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+\let\realunder=_
+
+\catcode`\|=\active \def|{{\tt\char124}}
+
+\chardef \less=`\<
+\catcode`\<=\active \def\activeless{{\tt \less}}\let< = \activeless
+\chardef \gtr=`\>
+\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr
+\catcode`\+=\active \def+{{\tt \char 43}}
+\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+\catcode`\-=\active \let-=\normaldash
+
+
+% used for headline/footline in the output routine, in case the page
+% breaks in the middle of an @tex block.
+\def\texinfochars{%
+  \let< = \activeless
+  \let> = \activegtr
+  \let~ = \activetilde 
+  \let^ = \activehat
+  \markupsetuplqdefault \markupsetuprqdefault 
+  \let\b = \strong
+  \let\i = \smartitalic
+  % in principle, all other definitions in \tex have to be undone too.
+}
+
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+  \normalturnoffactive
+  \otherbackslash
+}
+
+\catcode`\@=0
+
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In Texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active  % @ for escape char from now on.
+
+% Print a typewriter backslash.  For math mode, we can't simply use
+% \backslashcurfont: the story here is that in math mode, the \char
+% of \backslashcurfont ends up printing the roman \ from the math symbol
+% font (because \char in math mode uses the \mathcode, and plain.tex
+% sets \mathcode`\\="026E).  Hence we use an explicit \mathchar,
+% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
+% ignored family value; char position "5C).  We can't use " for the
+% usual hex value because it has already been made active.
+
+@def@ttbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}}
+@let@backslashchar = @ttbackslash % @backslashchar{} is for user documents.
+
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.  We switch back and forth between these.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+{@catcode`- = @active
+ @gdef@normalturnoffactive{%
+   @passthroughcharstrue
+   @let-=@normaldash
+   @let"=@normaldoublequote
+   @let$=@normaldollar %$ font-lock fix
+   @let+=@normalplus
+   @let<=@normalless
+   @let>=@normalgreater
+   @let^=@normalcaret
+   @let_=@normalunderscore
+   @let|=@normalverticalbar
+   @let~=@normaltilde
+   @let\=@ttbackslash
+   @markupsetuplqdefault
+   @markupsetuprqdefault
+   @unsepspaces
+ }
+}
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have @fixbackslash turn them back on.
+@catcode`+=@other @catcode`@_=@other
+
+% \enablebackslashhack - allow file to begin `\input texinfo'
+%
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+% If the file did not have a `\input texinfo', then it is turned off after
+% the first line; otherwise the first `\' in the file would cause an error.
+% This is used on the very last line of this file, texinfo.tex.
+% We also use @c to call @fixbackslash, in case ends of lines are hidden.
+{
+@catcode`@^=7
+@catcode`@^^M=13@gdef@enablebackslashhack{%
+  @global@let\ = @eatinput%
+  @catcode`@^^M=13%
+  @def@c{@fixbackslash@c}%
+  % Definition for the newline at the end of this file.
+  @def ^^M{@let^^M@secondlinenl}%
+  % Definition for a newline in the main Texinfo file.
+  @gdef @secondlinenl{@fixbackslash}%
+}}
+
+{@catcode`@^=7 @catcode`@^^M=13%
+@gdef@eatinput input texinfo#1^^M{@fixbackslash}}
+
+% Emergency active definition of newline, in case an active newline token
+% appears by mistake.
+{@catcode`@^=7 @catcode13=13%
+@gdef@enableemergencynewline{%
+  @gdef^^M{%
+    @par%
+    %<warning: active newline>@par%
+}}}
+
+
+@gdef@fixbackslash{%
+  @ifx\@eatinput @let\ = @ttbackslash @fi
+  @catcode13=5 % regular end of line
+  @enableemergencynewline
+  @let@c=@texinfoc
+  % Also turn back on active characters that might appear in the input
+  % file name, in case not using a pre-dumped format.
+  @catcode`+=@active
+  @catcode`@_=@active
+  %
+  % If texinfo.cnf is present on the system, read it.
+  % Useful for site-wide @afourpaper, etc.  This macro, @fixbackslash, gets
+  % called at the beginning of every Texinfo file.  Not opening texinfo.cnf
+  % directly in this file, texinfo.tex, makes it possible to make a format
+  % file for Texinfo.
+  %
+  @openin 1 texinfo.cnf
+  @ifeof 1 @else @input texinfo.cnf @fi
+  @closein 1
+}
+
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
+
+% These (along with & and #) are made active for url-breaking, so need
+% active definitions as the normal characters.
+@def@normaldot{.}
+@def@normalquest{?}
+@def@normalslash{/}
+
+% These look ok in all fonts, so just make them not special.
+% @hashchar{} gets its own user-level command, because of #line.
+@catcode`@& = @other @def@normalamp{&}
+@catcode`@# = @other @def@normalhash{#}
+@catcode`@% = @other @def@normalpercent{%}
+
+@let @hashchar = @normalhash
+
+@c Finally, make ` and ' active, so that txicodequoteundirected and
+@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
+@c don't make ` and ' active, @code will not get them as active chars.
+@c Do this last of all since we use ` in the previous @catcode assignments.
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
+
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message\\|emacs-page"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@enablebackslashhack
diff --git a/config/threadlib.m4 b/config/threadlib.m4
new file mode 100644
index 0000000..dc9a3d8
--- /dev/null
+++ b/config/threadlib.m4
@@ -0,0 +1,389 @@
+# threadlib.m4 serial 11 (gettext-0.18.2)
+dnl Copyright (C) 2005-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl gl_THREADLIB
+dnl ------------
+dnl Tests for a multithreading library to be used.
+dnl If the configure.ac contains a definition of the gl_THREADLIB_DEFAULT_NO
+dnl (it must be placed before the invocation of gl_THREADLIB_EARLY!), then the
+dnl default is 'no', otherwise it is system dependent. In both cases, the user
+dnl can change the choice through the options --enable-threads=choice or
+dnl --disable-threads.
+dnl Defines at most one of the macros USE_POSIX_THREADS, USE_SOLARIS_THREADS,
+dnl USE_PTH_THREADS, USE_WINDOWS_THREADS
+dnl Sets the variables LIBTHREAD and LTLIBTHREAD to the linker options for use
+dnl in a Makefile (LIBTHREAD for use without libtool, LTLIBTHREAD for use with
+dnl libtool).
+dnl Sets the variables LIBMULTITHREAD and LTLIBMULTITHREAD similarly, for
+dnl programs that really need multithread functionality. The difference
+dnl between LIBTHREAD and LIBMULTITHREAD is that on platforms supporting weak
+dnl symbols, typically LIBTHREAD is empty whereas LIBMULTITHREAD is not.
+dnl Adds to CPPFLAGS the flag -D_REENTRANT or -D_THREAD_SAFE if needed for
+dnl multithread-safe programs.
+
+AC_DEFUN([gl_THREADLIB_EARLY],
+[
+  AC_REQUIRE([gl_THREADLIB_EARLY_BODY])
+])
+
+dnl The guts of gl_THREADLIB_EARLY. Needs to be expanded only once.
+
+AC_DEFUN([gl_THREADLIB_EARLY_BODY],
+[
+  dnl Ordering constraints: This macro modifies CPPFLAGS in a way that
+  dnl influences the result of the autoconf tests that test for *_unlocked
+  dnl declarations, on AIX 5 at least. Therefore it must come early.
+  AC_BEFORE([$0], [gl_FUNC_GLIBC_UNLOCKED_IO])dnl
+  AC_BEFORE([$0], [gl_ARGP])dnl
+
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  dnl _GNU_SOURCE is needed for pthread_rwlock_t on glibc systems.
+  dnl AC_USE_SYSTEM_EXTENSIONS was introduced in autoconf 2.60 and obsoletes
+  dnl AC_GNU_SOURCE.
+  m4_ifdef([AC_USE_SYSTEM_EXTENSIONS],
+    [AC_REQUIRE([AC_USE_SYSTEM_EXTENSIONS])],
+    [AC_REQUIRE([AC_GNU_SOURCE])])
+  dnl Check for multithreading.
+  m4_ifdef([gl_THREADLIB_DEFAULT_NO],
+    [m4_divert_text([DEFAULTS], [gl_use_threads_default=no])],
+    [m4_divert_text([DEFAULTS], [gl_use_threads_default=])])
+  AC_ARG_ENABLE([threads],
+AC_HELP_STRING([--enable-threads={posix|solaris|pth|windows}], [specify multithreading API])m4_ifdef([gl_THREADLIB_DEFAULT_NO], [], [
+AC_HELP_STRING([--disable-threads], [build without multithread safety])]),
+    [gl_use_threads=$enableval],
+    [if test -n "$gl_use_threads_default"; then
+       gl_use_threads="$gl_use_threads_default"
+     else
+changequote(,)dnl
+       case "$host_os" in
+         dnl Disable multithreading by default on OSF/1, because it interferes
+         dnl with fork()/exec(): When msgexec is linked with -lpthread, its
+         dnl child process gets an endless segmentation fault inside execvp().
+         dnl Disable multithreading by default on Cygwin 1.5.x, because it has
+         dnl bugs that lead to endless loops or crashes. See
+         dnl <http://cygwin.com/ml/cygwin/2009-08/msg00283.html>.
+         osf*) gl_use_threads=no ;;
+         cygwin*)
+               case `uname -r` in
+                 1.[0-5].*) gl_use_threads=no ;;
+                 *)         gl_use_threads=yes ;;
+               esac
+               ;;
+         *)    gl_use_threads=yes ;;
+       esac
+changequote([,])dnl
+     fi
+    ])
+  if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then
+    # For using <pthread.h>:
+    case "$host_os" in
+      osf*)
+        # On OSF/1, the compiler needs the flag -D_REENTRANT so that it
+        # groks <pthread.h>. cc also understands the flag -pthread, but
+        # we don't use it because 1. gcc-2.95 doesn't understand -pthread,
+        # 2. putting a flag into CPPFLAGS that has an effect on the linker
+        # causes the AC_LINK_IFELSE test below to succeed unexpectedly,
+        # leading to wrong values of LIBTHREAD and LTLIBTHREAD.
+        CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+        ;;
+    esac
+    # Some systems optimize for single-threaded programs by default, and
+    # need special flags to disable these optimizations. For example, the
+    # definition of 'errno' in <errno.h>.
+    case "$host_os" in
+      aix* | freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;;
+      solaris*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" ;;
+    esac
+  fi
+])
+
+dnl The guts of gl_THREADLIB. Needs to be expanded only once.
+
+AC_DEFUN([gl_THREADLIB_BODY],
+[
+  AC_REQUIRE([gl_THREADLIB_EARLY_BODY])
+  gl_threads_api=none
+  LIBTHREAD=
+  LTLIBTHREAD=
+  LIBMULTITHREAD=
+  LTLIBMULTITHREAD=
+  if test "$gl_use_threads" != no; then
+    dnl Check whether the compiler and linker support weak declarations.
+    AC_CACHE_CHECK([whether imported symbols can be declared weak],
+      [gl_cv_have_weak],
+      [gl_cv_have_weak=no
+       dnl First, test whether the compiler accepts it syntactically.
+       AC_LINK_IFELSE(
+         [AC_LANG_PROGRAM(
+            [[extern void xyzzy ();
+#pragma weak xyzzy]],
+            [[xyzzy();]])],
+         [gl_cv_have_weak=maybe])
+       if test $gl_cv_have_weak = maybe; then
+         dnl Second, test whether it actually works. On Cygwin 1.7.2, with
+         dnl gcc 4.3, symbols declared weak always evaluate to the address 0.
+         AC_RUN_IFELSE(
+           [AC_LANG_SOURCE([[
+#include <stdio.h>
+#pragma weak fputs
+int main ()
+{
+  return (fputs == NULL);
+}]])],
+           [gl_cv_have_weak=yes],
+           [gl_cv_have_weak=no],
+           [dnl When cross-compiling, assume that only ELF platforms support
+            dnl weak symbols.
+            AC_EGREP_CPP([Extensible Linking Format],
+              [#ifdef __ELF__
+               Extensible Linking Format
+               #endif
+              ],
+              [gl_cv_have_weak="guessing yes"],
+              [gl_cv_have_weak="guessing no"])
+           ])
+       fi
+      ])
+    if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then
+      # On OSF/1, the compiler needs the flag -pthread or -D_REENTRANT so that
+      # it groks <pthread.h>. It's added above, in gl_THREADLIB_EARLY_BODY.
+      AC_CHECK_HEADER([pthread.h],
+        [gl_have_pthread_h=yes], [gl_have_pthread_h=no])
+      if test "$gl_have_pthread_h" = yes; then
+        # Other possible tests:
+        #   -lpthreads (FSU threads, PCthreads)
+        #   -lgthreads
+        gl_have_pthread=
+        # Test whether both pthread_mutex_lock and pthread_mutexattr_init exist
+        # in libc. IRIX 6.5 has the first one in both libc and libpthread, but
+        # the second one only in libpthread, and lock.c needs it.
+        #
+        # If -pthread works, prefer it to -lpthread, since Ubuntu 14.04
+        # needs -pthread for some reason.  See:
+        # http://lists.gnu.org/archive/html/bug-gnulib/2014-09/msg00023.html
+        save_LIBS=$LIBS
+        for gl_pthread in '' '-pthread'; do
+          LIBS="$LIBS $gl_pthread"
+          AC_LINK_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[#include <pthread.h>
+                 pthread_mutex_t m;
+                 pthread_mutexattr_t ma;
+               ]],
+               [[pthread_mutex_lock (&m);
+                 pthread_mutexattr_init (&ma);]])],
+            [gl_have_pthread=yes
+             LIBTHREAD=$gl_pthread LTLIBTHREAD=$gl_pthread
+             LIBMULTITHREAD=$gl_pthread LTLIBMULTITHREAD=$gl_pthread])
+          LIBS=$save_LIBS
+          test -n "$gl_have_pthread" && break
+        done
+
+        # Test for libpthread by looking for pthread_kill. (Not pthread_self,
+        # since it is defined as a macro on OSF/1.)
+        if test -n "$gl_have_pthread" && test -z "$LIBTHREAD"; then
+          # The program links fine without libpthread. But it may actually
+          # need to link with libpthread in order to create multiple threads.
+          AC_CHECK_LIB([pthread], [pthread_kill],
+            [LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread
+             # On Solaris and HP-UX, most pthread functions exist also in libc.
+             # Therefore pthread_in_use() needs to actually try to create a
+             # thread: pthread_create from libc will fail, whereas
+             # pthread_create will actually create a thread.
+             case "$host_os" in
+               solaris* | hpux*)
+                 AC_DEFINE([PTHREAD_IN_USE_DETECTION_HARD], [1],
+                   [Define if the pthread_in_use() detection is hard.])
+             esac
+            ])
+        elif test -z "$gl_have_pthread"; then
+          # Some library is needed. Try libpthread and libc_r.
+          AC_CHECK_LIB([pthread], [pthread_kill],
+            [gl_have_pthread=yes
+             LIBTHREAD=-lpthread LTLIBTHREAD=-lpthread
+             LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread])
+          if test -z "$gl_have_pthread"; then
+            # For FreeBSD 4.
+            AC_CHECK_LIB([c_r], [pthread_kill],
+              [gl_have_pthread=yes
+               LIBTHREAD=-lc_r LTLIBTHREAD=-lc_r
+               LIBMULTITHREAD=-lc_r LTLIBMULTITHREAD=-lc_r])
+          fi
+        fi
+        if test -n "$gl_have_pthread"; then
+          gl_threads_api=posix
+          AC_DEFINE([USE_POSIX_THREADS], [1],
+            [Define if the POSIX multithreading library can be used.])
+          if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+            if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+              AC_DEFINE([USE_POSIX_THREADS_WEAK], [1],
+                [Define if references to the POSIX multithreading library should be made weak.])
+              LIBTHREAD=
+              LTLIBTHREAD=
+            fi
+          fi
+        fi
+      fi
+    fi
+    if test -z "$gl_have_pthread"; then
+      if test "$gl_use_threads" = yes || test "$gl_use_threads" = solaris; then
+        gl_have_solaristhread=
+        gl_save_LIBS="$LIBS"
+        LIBS="$LIBS -lthread"
+        AC_LINK_IFELSE(
+          [AC_LANG_PROGRAM(
+             [[
+#include <thread.h>
+#include <synch.h>
+             ]],
+             [[thr_self();]])],
+          [gl_have_solaristhread=yes])
+        LIBS="$gl_save_LIBS"
+        if test -n "$gl_have_solaristhread"; then
+          gl_threads_api=solaris
+          LIBTHREAD=-lthread
+          LTLIBTHREAD=-lthread
+          LIBMULTITHREAD="$LIBTHREAD"
+          LTLIBMULTITHREAD="$LTLIBTHREAD"
+          AC_DEFINE([USE_SOLARIS_THREADS], [1],
+            [Define if the old Solaris multithreading library can be used.])
+          if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+            AC_DEFINE([USE_SOLARIS_THREADS_WEAK], [1],
+              [Define if references to the old Solaris multithreading library should be made weak.])
+            LIBTHREAD=
+            LTLIBTHREAD=
+          fi
+        fi
+      fi
+    fi
+    if test "$gl_use_threads" = pth; then
+      gl_save_CPPFLAGS="$CPPFLAGS"
+      AC_LIB_LINKFLAGS([pth])
+      gl_have_pth=
+      gl_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBPTH"
+      AC_LINK_IFELSE(
+        [AC_LANG_PROGRAM([[#include <pth.h>]], [[pth_self();]])],
+        [gl_have_pth=yes])
+      LIBS="$gl_save_LIBS"
+      if test -n "$gl_have_pth"; then
+        gl_threads_api=pth
+        LIBTHREAD="$LIBPTH"
+        LTLIBTHREAD="$LTLIBPTH"
+        LIBMULTITHREAD="$LIBTHREAD"
+        LTLIBMULTITHREAD="$LTLIBTHREAD"
+        AC_DEFINE([USE_PTH_THREADS], [1],
+          [Define if the GNU Pth multithreading library can be used.])
+        if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+          if case "$gl_cv_have_weak" in *yes) true;; *) false;; esac; then
+            AC_DEFINE([USE_PTH_THREADS_WEAK], [1],
+              [Define if references to the GNU Pth multithreading library should be made weak.])
+            LIBTHREAD=
+            LTLIBTHREAD=
+          fi
+        fi
+      else
+        CPPFLAGS="$gl_save_CPPFLAGS"
+      fi
+    fi
+    if test -z "$gl_have_pthread"; then
+      case "$gl_use_threads" in
+        yes | windows | win32) # The 'win32' is for backward compatibility.
+          if { case "$host_os" in
+                 mingw*) true;;
+                 *) false;;
+               esac
+             }; then
+            gl_threads_api=windows
+            AC_DEFINE([USE_WINDOWS_THREADS], [1],
+              [Define if the native Windows multithreading API can be used.])
+          fi
+          ;;
+      esac
+    fi
+  fi
+  AC_MSG_CHECKING([for multithread API to use])
+  AC_MSG_RESULT([$gl_threads_api])
+  AC_SUBST([LIBTHREAD])
+  AC_SUBST([LTLIBTHREAD])
+  AC_SUBST([LIBMULTITHREAD])
+  AC_SUBST([LTLIBMULTITHREAD])
+])
+
+AC_DEFUN([gl_THREADLIB],
+[
+  AC_REQUIRE([gl_THREADLIB_EARLY])
+  AC_REQUIRE([gl_THREADLIB_BODY])
+])
+
+
+dnl gl_DISABLE_THREADS
+dnl ------------------
+dnl Sets the gl_THREADLIB default so that threads are not used by default.
+dnl The user can still override it at installation time, by using the
+dnl configure option '--enable-threads'.
+
+AC_DEFUN([gl_DISABLE_THREADS], [
+  m4_divert_text([INIT_PREPARE], [gl_use_threads_default=no])
+])
+
+
+dnl Survey of platforms:
+dnl
+dnl Platform           Available  Compiler    Supports   test-lock
+dnl                    flavours   option      weak       result
+dnl ---------------    ---------  ---------   --------   ---------
+dnl Linux 2.4/glibc    posix      -lpthread       Y      OK
+dnl
+dnl GNU Hurd/glibc     posix
+dnl
+dnl Ubuntu 14.04       posix      -pthread        Y      OK
+dnl
+dnl FreeBSD 5.3        posix      -lc_r           Y
+dnl                    posix      -lkse ?         Y
+dnl                    posix      -lpthread ?     Y
+dnl                    posix      -lthr           Y
+dnl
+dnl FreeBSD 5.2        posix      -lc_r           Y
+dnl                    posix      -lkse           Y
+dnl                    posix      -lthr           Y
+dnl
+dnl FreeBSD 4.0,4.10   posix      -lc_r           Y      OK
+dnl
+dnl NetBSD 1.6         --
+dnl
+dnl OpenBSD 3.4        posix      -lpthread       Y      OK
+dnl
+dnl Mac OS X 10.[123]  posix      -lpthread       Y      OK
+dnl
+dnl Solaris 7,8,9      posix      -lpthread       Y      Sol 7,8: 0.0; Sol 9: OK
+dnl                    solaris    -lthread        Y      Sol 7,8: 0.0; Sol 9: OK
+dnl
+dnl HP-UX 11           posix      -lpthread       N (cc) OK
+dnl                                               Y (gcc)
+dnl
+dnl IRIX 6.5           posix      -lpthread       Y      0.5
+dnl
+dnl AIX 4.3,5.1        posix      -lpthread       N      AIX 4: 0.5; AIX 5: OK
+dnl
+dnl OSF/1 4.0,5.1      posix      -pthread (cc)   N      OK
+dnl                               -lpthread (gcc) Y
+dnl
+dnl Cygwin             posix      -lpthread       Y      OK
+dnl
+dnl Any of the above   pth        -lpth                  0.0
+dnl
+dnl Mingw              windows                    N      OK
+dnl
+dnl BeOS 5             --
+dnl
+dnl The test-lock result shows what happens if in test-lock.c EXPLICIT_YIELD is
+dnl turned off:
+dnl   OK if all three tests terminate OK,
+dnl   0.5 if the first test terminates OK but the second one loops endlessly,
+dnl   0.0 if the first test already loops endlessly.
diff --git a/config/uintmax_t.m4 b/config/uintmax_t.m4
new file mode 100644
index 0000000..0a94f17
--- /dev/null
+++ b/config/uintmax_t.m4
@@ -0,0 +1,30 @@
+# uintmax_t.m4 serial 12
+dnl Copyright (C) 1997-2004, 2007-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+AC_PREREQ([2.13])
+
+# Define uintmax_t to 'unsigned long' or 'unsigned long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+AC_DEFUN([gl_AC_TYPE_UINTMAX_T],
+[
+  AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+  AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+  if test $gl_cv_header_inttypes_h = no && test $gl_cv_header_stdint_h = no; then
+    AC_REQUIRE([AC_TYPE_UNSIGNED_LONG_LONG_INT])
+    test $ac_cv_type_unsigned_long_long_int = yes \
+      && ac_type='unsigned long long' \
+      || ac_type='unsigned long'
+    AC_DEFINE_UNQUOTED([uintmax_t], [$ac_type],
+      [Define to unsigned long or unsigned long long
+       if <stdint.h> and <inttypes.h> don't define.])
+  else
+    AC_DEFINE([HAVE_UINTMAX_T], [1],
+      [Define if you have the 'uintmax_t' type in <stdint.h> or <inttypes.h>.])
+  fi
+])
diff --git a/config/visibility.m4 b/config/visibility.m4
new file mode 100644
index 0000000..552e397
--- /dev/null
+++ b/config/visibility.m4
@@ -0,0 +1,77 @@
+# visibility.m4 serial 5 (gettext-0.18.2)
+dnl Copyright (C) 2005, 2008, 2010-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl Tests whether the compiler supports the command-line option
+dnl -fvisibility=hidden and the function and variable attributes
+dnl __attribute__((__visibility__("hidden"))) and
+dnl __attribute__((__visibility__("default"))).
+dnl Does *not* test for __visibility__("protected") - which has tricky
+dnl semantics (see the 'vismain' test in glibc) and does not exist e.g. on
+dnl Mac OS X.
+dnl Does *not* test for __visibility__("internal") - which has processor
+dnl dependent semantics.
+dnl Does *not* test for #pragma GCC visibility push(hidden) - which is
+dnl "really only recommended for legacy code".
+dnl Set the variable CFLAG_VISIBILITY.
+dnl Defines and sets the variable HAVE_VISIBILITY.
+
+AC_DEFUN([gl_VISIBILITY],
+[
+  AC_REQUIRE([AC_PROG_CC])
+  CFLAG_VISIBILITY=
+  HAVE_VISIBILITY=0
+  if test -n "$GCC"; then
+    dnl First, check whether -Werror can be added to the command line, or
+    dnl whether it leads to an error because of some other option that the
+    dnl user has put into $CC $CFLAGS $CPPFLAGS.
+    AC_MSG_CHECKING([whether the -Werror option is usable])
+    AC_CACHE_VAL([gl_cv_cc_vis_werror], [
+      gl_save_CFLAGS="$CFLAGS"
+      CFLAGS="$CFLAGS -Werror"
+      AC_COMPILE_IFELSE(
+        [AC_LANG_PROGRAM([[]], [[]])],
+        [gl_cv_cc_vis_werror=yes],
+        [gl_cv_cc_vis_werror=no])
+      CFLAGS="$gl_save_CFLAGS"])
+    AC_MSG_RESULT([$gl_cv_cc_vis_werror])
+    dnl Now check whether visibility declarations are supported.
+    AC_MSG_CHECKING([for simple visibility declarations])
+    AC_CACHE_VAL([gl_cv_cc_visibility], [
+      gl_save_CFLAGS="$CFLAGS"
+      CFLAGS="$CFLAGS -fvisibility=hidden"
+      dnl We use the option -Werror and a function dummyfunc, because on some
+      dnl platforms (Cygwin 1.7) the use of -fvisibility triggers a warning
+      dnl "visibility attribute not supported in this configuration; ignored"
+      dnl at the first function definition in every compilation unit, and we
+      dnl don't want to use the option in this case.
+      if test $gl_cv_cc_vis_werror = yes; then
+        CFLAGS="$CFLAGS -Werror"
+      fi
+      AC_COMPILE_IFELSE(
+        [AC_LANG_PROGRAM(
+           [[extern __attribute__((__visibility__("hidden"))) int hiddenvar;
+             extern __attribute__((__visibility__("default"))) int exportedvar;
+             extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
+             extern __attribute__((__visibility__("default"))) int exportedfunc (void);
+             void dummyfunc (void) {}
+           ]],
+           [[]])],
+        [gl_cv_cc_visibility=yes],
+        [gl_cv_cc_visibility=no])
+      CFLAGS="$gl_save_CFLAGS"])
+    AC_MSG_RESULT([$gl_cv_cc_visibility])
+    if test $gl_cv_cc_visibility = yes; then
+      CFLAG_VISIBILITY="-fvisibility=hidden"
+      HAVE_VISIBILITY=1
+    fi
+  fi
+  AC_SUBST([CFLAG_VISIBILITY])
+  AC_SUBST([HAVE_VISIBILITY])
+  AC_DEFINE_UNQUOTED([HAVE_VISIBILITY], [$HAVE_VISIBILITY],
+    [Define to 1 or 0, depending whether the compiler supports simple visibility declarations.])
+])
diff --git a/config/wchar_t.m4 b/config/wchar_t.m4
new file mode 100644
index 0000000..839a04c
--- /dev/null
+++ b/config/wchar_t.m4
@@ -0,0 +1,24 @@
+# wchar_t.m4 serial 4 (gettext-0.18.2)
+dnl Copyright (C) 2002-2003, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <stddef.h> has the 'wchar_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WCHAR_T],
+[
+  AC_CACHE_CHECK([for wchar_t], [gt_cv_c_wchar_t],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <stddef.h>
+            wchar_t foo = (wchar_t)'\0';]],
+          [[]])],
+       [gt_cv_c_wchar_t=yes],
+       [gt_cv_c_wchar_t=no])])
+  if test $gt_cv_c_wchar_t = yes; then
+    AC_DEFINE([HAVE_WCHAR_T], [1], [Define if you have the 'wchar_t' type.])
+  fi
+])
diff --git a/config/wint_t.m4 b/config/wint_t.m4
new file mode 100644
index 0000000..9b07b07
--- /dev/null
+++ b/config/wint_t.m4
@@ -0,0 +1,32 @@
+# wint_t.m4 serial 5 (gettext-0.18.2)
+dnl Copyright (C) 2003, 2007-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <wchar.h> has the 'wint_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WINT_T],
+[
+  AC_CACHE_CHECK([for wint_t], [gt_cv_c_wint_t],
+    [AC_COMPILE_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[
+/* Tru64 with Desktop Toolkit C has a bug: <stdio.h> must be included before
+   <wchar.h>.
+   BSD/OS 4.0.1 has a bug: <stddef.h>, <stdio.h> and <time.h> must be included
+   before <wchar.h>.  */
+#include <stddef.h>
+#include <stdio.h>
+#include <time.h>
+#include <wchar.h>
+            wint_t foo = (wchar_t)'\0';]],
+          [[]])],
+       [gt_cv_c_wint_t=yes],
+       [gt_cv_c_wint_t=no])])
+  if test $gt_cv_c_wint_t = yes; then
+    AC_DEFINE([HAVE_WINT_T], [1], [Define if you have the 'wint_t' type.])
+  fi
+])
diff --git a/config/xsize.m4 b/config/xsize.m4
new file mode 100644
index 0000000..3af23ec
--- /dev/null
+++ b/config/xsize.m4
@@ -0,0 +1,12 @@
+# xsize.m4 serial 5
+dnl Copyright (C) 2003-2004, 2008-2014 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_XSIZE],
+[
+  dnl Prerequisites of lib/xsize.h.
+  AC_REQUIRE([gl_SIZE_MAX])
+  AC_CHECK_HEADERS([stdint.h])
+])
diff --git a/configure b/configure
new file mode 100755
index 0000000..d3e26b6
--- /dev/null
+++ b/configure
@@ -0,0 +1,13314 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for GNU make 4.2.90.
+#
+# Report bugs to <bug-make@gnu.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and bug-make@gnu.org
+$0: about your system, including any error possibly output
+$0: before this message. Then install a modern shell, or
+$0: manually run the script under such a shell if you do
+$0: have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='GNU make'
+PACKAGE_TARNAME='make'
+PACKAGE_VERSION='4.2.90'
+PACKAGE_STRING='GNU make 4.2.90'
+PACKAGE_BUGREPORT='bug-make@gnu.org'
+PACKAGE_URL='http://www.gnu.org/software/make/'
+
+ac_unique_file="vpath.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+gt_needs=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+WINDOWSENV_FALSE
+WINDOWSENV_TRUE
+MAKE_HOST
+USE_LOCAL_GLOB_FALSE
+USE_LOCAL_GLOB_TRUE
+GLOBLIB
+GLOBINC
+AM_LDFLAGS
+USE_CUSTOMS_FALSE
+USE_CUSTOMS_TRUE
+REMOTE
+GETLOADAVG_LIBS
+KMEM_GROUP
+NEED_SETGID
+LIBOBJS
+HAVE_GUILE_FALSE
+HAVE_GUILE_TRUE
+GUILE_LIBS
+GUILE_CFLAGS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+ALLOCA
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+LTLIBICONV
+LIBICONV
+INTL_MACOSX_LIBS
+XGETTEXT_EXTRA_OPTIONS
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+MSGFMT_015
+GMSGFMT
+MSGFMT
+GETTEXT_MACRO_VERSION
+USE_NLS
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+ac_ct_AR
+PERL
+AR
+RANLIB
+EGREP
+GREP
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files='MAINT_MAKEFILE'
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_dependency_tracking
+enable_nls
+with_gnu_ld
+enable_rpath
+with_libiconv_prefix
+with_libintl_prefix
+enable_largefile
+with_guile
+with_customs
+enable_case_insensitive_file_system
+enable_job_server
+enable_load
+with_dmalloc
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+GUILE_CFLAGS
+GUILE_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures GNU make 4.2.90 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/make]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of GNU make 4.2.90:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --disable-nls           do not use Native Language Support
+  --disable-rpath         do not hardcode runtime library paths
+  --disable-largefile     omit support for large files
+  --enable-case-insensitive-file-system
+                          assume file systems are case insensitive
+  --disable-job-server    disallow recursive make communication during -jN
+  --disable-load          disable support for the 'load' operation
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
+  --without-libiconv-prefix     don't search for libiconv in includedir and libdir
+  --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
+  --without-libintl-prefix     don't search for libintl in includedir and libdir
+  --with-guile            Support GNU Guile for embedded scripting
+  --with-customs=DIR      enable remote jobs via Customs--see README.customs
+  --with-dmalloc          use dmalloc, as in http://www.dmalloc.com
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  PKG_CONFIG  path to pkg-config utility
+  PKG_CONFIG_PATH
+              directories to add to pkg-config's search path
+  PKG_CONFIG_LIBDIR
+              path overriding pkg-config's built-in search path
+  GUILE_CFLAGS
+              C compiler flags for GUILE, overriding pkg-config
+  GUILE_LIBS  linker flags for GUILE, overriding pkg-config
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-make@gnu.org>.
+GNU make home page: <http://www.gnu.org/software/make/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+GNU make configure 4.2.90
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------- ##
+## Report this to bug-make@gnu.org ##
+## ------------------------------- ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if eval \${$4+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_member
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by GNU make $as_me 4.2.90, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+gt_needs="$gt_needs "
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+# Autoconf setup
+ac_aux_dir=
+for ac_dir in config "$srcdir"/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in config \"$srcdir\"/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+# Automake setup
+# We have to enable "foreign" because ChangeLog is auto-generated
+# We cannot enable -Werror because gettext 0.18.1 has invalid content
+# When we update gettext to 0.18.3 or better we can add it again.
+am__api_version='1.15'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='make'
+ VERSION='4.2.90'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar  pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
+
+# Checks for programs.
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+  MINIX=yes
+else
+  MINIX=
+fi
+
+
+  if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#         define __EXTENSIONS__ 1
+          $ac_includes_default
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_safe_to_define___extensions__=yes
+else
+  ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+  test $ac_cv_safe_to_define___extensions__ = yes &&
+    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="ar"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+# Perl is needed for the test suite (only)
+# Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_PERL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$PERL"; then
+  ac_cv_prog_PERL="$PERL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_PERL="perl"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_prog_PERL" && ac_cv_prog_PERL="perl"
+fi
+fi
+PERL=$ac_cv_prog_PERL
+if test -n "$PERL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5
+$as_echo "$PERL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+# Needed for w32/Makefile.am
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar lib "link -lib"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar lib "link -lib"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
+$as_echo_n "checking the archiver ($AR) interface... " >&6; }
+if ${am_cv_ar_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+   am_cv_ar_interface=ar
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int some_variable = 0;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
+        { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
+$as_echo "$am_cv_ar_interface" >&6; }
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  as_fn_error $? "could not determine $AR interface" "$LINENO" 5
+  ;;
+esac
+
+
+# Specialized system macros
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
+$as_echo_n "checking for library containing strerror... " >&6; }
+if ${ac_cv_search_strerror+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char strerror ();
+int
+main ()
+{
+return strerror ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' cposix; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_strerror=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_strerror+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_strerror+:} false; then :
+
+else
+  ac_cv_search_strerror=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
+$as_echo "$ac_cv_search_strerror" >&6; }
+ac_res=$ac_cv_search_strerror
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+
+
+# Enable gettext, in "external" mode.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+    # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+  enableval=$enable_nls; USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+      GETTEXT_MACRO_VERSION=0.19
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGFMT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+    ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GMSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $GMSGFMT in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+    case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+    *) MSGFMT_015=$MSGFMT ;;
+  esac
+
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_XGETTEXT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$XGETTEXT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+    ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+    rm -f messages.po
+
+    case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGMERGE+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGMERGE" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+            ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+    ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+        test -n "$localedir" || localedir='${datadir}/locale'
+
+
+    test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+
+
+  ac_config_commands="$ac_config_commands po-directories"
+
+
+
+      if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo "$ac_prog"| sed 's%\\\\%/%g'`
+      while echo "$ac_prog" | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${acl_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$acl_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      acl_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+        test "$with_gnu_ld" != no && break
+        ;;
+      *)
+        test "$with_gnu_ld" != yes && break
+        ;;
+      esac
+    fi
+  done
+  IFS="$acl_save_ifs"
+else
+  acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${acl_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes
+  ;;
+*)
+  acl_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+                                                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if ${acl_cv_rpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+    # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+  enableval=$enable_rpath; :
+else
+  enable_rpath=yes
+fi
+
+
+
+
+  acl_libdirstem=lib
+  acl_libdirstem2=
+  case "$host_os" in
+    solaris*)
+                                    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
+$as_echo_n "checking for 64-bit host... " >&6; }
+if ${gl_cv_solaris_64bit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef _LP64
+sixtyfour bits
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
+  gl_cv_solaris_64bit=yes
+else
+  gl_cv_solaris_64bit=no
+fi
+rm -f conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
+$as_echo "$gl_cv_solaris_64bit" >&6; }
+      if test $gl_cv_solaris_64bit = yes; then
+        acl_libdirstem=lib/64
+        case "$host_cpu" in
+          sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+          i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+        esac
+      fi
+      ;;
+    *)
+      searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+      if test -n "$searchpath"; then
+        acl_save_IFS="${IFS= 	}"; IFS=":"
+        for searchdir in $searchpath; do
+          if test -d "$searchdir"; then
+            case "$searchdir" in
+              */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+              */../ | */.. )
+                # Better ignore directories of this form. They are misleading.
+                ;;
+              *) searchdir=`cd "$searchdir" && pwd`
+                 case "$searchdir" in
+                   */lib64 ) acl_libdirstem=lib64 ;;
+                 esac ;;
+            esac
+          fi
+        done
+        IFS="$acl_save_IFS"
+      fi
+      ;;
+  esac
+  test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+  withval=$with_libiconv_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBICONV=
+  LTLIBICONV=
+  INCICONV=
+  LIBICONV_PREFIX=
+      HAVE_LIBICONV=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='iconv '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+              else
+                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+                    LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+            LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+  gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+  fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyCurrent=yes
+else
+  gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+
+
+
+
+
+
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+    case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+    if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if eval \${$gt_func_gnugettext_libc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libc=yes"
+else
+  eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+          am_save_CPPFLAGS="$CPPFLAGS"
+
+  for element in $INCICONV; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if ${am_cv_func_iconv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+             iconv(cd,NULL,NULL,NULL,NULL);
+             iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_lib_iconv=yes
+        am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+      LIBS="$am_save_LIBS"
+    fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+  if test "$am_cv_func_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
+$as_echo_n "checking for working iconv... " >&6; }
+if ${am_cv_func_iconv_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+                  am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      am_cv_func_iconv_works=no
+      for ac_iconv_const in '' 'const'; do
+        if test "$cross_compiling" = yes; then :
+  case "$host_os" in
+             aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+             *)            am_cv_func_iconv_works="guessing yes" ;;
+           esac
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <iconv.h>
+#include <string.h>
+
+#ifndef ICONV_CONST
+# define ICONV_CONST $ac_iconv_const
+#endif
+
+int
+main ()
+{
+int result = 0;
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 1;
+        iconv_close (cd_utf8_to_88591);
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\263";
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 2;
+        iconv_close (cd_ascii_to_88591);
+      }
+  }
+  /* Test against AIX 6.1..7.1 bug: Buffer overrun.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304";
+        static char buf[2] = { (char)0xDE, (char)0xAD };
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = 1;
+        char *outptr = buf;
+        size_t outbytesleft = 1;
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+          result |= 4;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          result |= 8;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  if (/* Try standardized names.  */
+      iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+      /* Try IRIX, OSF/1 names.  */
+      && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+      /* Try AIX names.  */
+      && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+      /* Try HP-UX names.  */
+      && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+    result |= 16;
+  return result;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  am_cv_func_iconv_works=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+        test "$am_cv_func_iconv_works" = no || break
+      done
+      LIBS="$am_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
+$as_echo "$am_cv_func_iconv_works" >&6; }
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+  else
+            CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+  withval=$with_libintl_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && ! test -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBINTL=
+  LTLIBINTL=
+  INCINTL=
+  LIBINTL_PREFIX=
+      HAVE_LIBINTL=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='intl '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+              else
+                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+                    LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+            LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if eval \${$gt_func_gnugettext_libintl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+                        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libintl=yes"
+else
+  eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+                        if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  LIBINTL="$LIBINTL $LIBICONV"
+                 LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                 eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+        fi
+
+                                        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+                    LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+                LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+  if test "$USE_NLS" = "yes"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+  for element in $INCINTL; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+      fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+    fi
+
+        POSUB=po
+  fi
+
+
+
+    INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+# This test must come as early as possible after the compiler configuration
+# tests, because the choice of the file model can (in principle) affect
+# whether functions and headers are available, whether they work, etc.
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+  enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_sys_largefile_CC=no
+     if test "$GCC" != yes; then
+       ac_save_CC=$CC
+       while :; do
+	 # IRIX 6.2 and later do not support large files by default,
+	 # so use the C compiler's -n32 option if that helps.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 CC="$CC -n32"
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 break
+       done
+       CC=$ac_save_CC
+       rm -f conftest.$ac_ext
+    fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+  if test "$ac_cv_sys_largefile_CC" != no; then
+    CC=$CC$ac_cv_sys_largefile_CC
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_file_offset_bits=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  if test $ac_cv_sys_file_offset_bits = unknown; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_large_files=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  fi
+
+
+fi
+
+
+# Checks for libraries.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing getpwnam" >&5
+$as_echo_n "checking for library containing getpwnam... " >&6; }
+if ${ac_cv_search_getpwnam+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getpwnam ();
+int
+main ()
+{
+return getpwnam ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' sun; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_getpwnam=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_getpwnam+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_getpwnam+:} false; then :
+
+else
+  ac_cv_search_getpwnam=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_getpwnam" >&5
+$as_echo "$ac_cv_search_getpwnam" >&6; }
+ac_res=$ac_cv_search_getpwnam
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+
+# Checks for header files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+ac_header_dirent=no
+for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
+  as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
+$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; }
+if eval \${$as_ac_Header+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <$ac_hdr>
+
+int
+main ()
+{
+if ((DIR *) 0)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$as_ac_Header=yes"
+else
+  eval "$as_ac_Header=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$as_ac_Header
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+_ACEOF
+
+ac_header_dirent=$ac_hdr; break
+fi
+
+done
+# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
+if test $ac_header_dirent = dirent.h; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dir; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if ${ac_cv_search_opendir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char opendir ();
+int
+main ()
+{
+return opendir ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' x; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_opendir+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_opendir+:} false; then :
+
+else
+  ac_cv_search_opendir=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5
+$as_echo_n "checking whether stat file-mode macros are broken... " >&6; }
+if ${ac_cv_header_stat_broken+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#if defined S_ISBLK && defined S_IFDIR
+extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1];
+#endif
+
+#if defined S_ISBLK && defined S_IFCHR
+extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1];
+#endif
+
+#if defined S_ISLNK && defined S_IFREG
+extern char c3[S_ISLNK (S_IFREG) ? -1 : 1];
+#endif
+
+#if defined S_ISSOCK && defined S_IFREG
+extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1];
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stat_broken=no
+else
+  ac_cv_header_stat_broken=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5
+$as_echo "$ac_cv_header_stat_broken" >&6; }
+if test $ac_cv_header_stat_broken = yes; then
+
+$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
+$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
+if ${ac_cv_header_time+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_time=yes
+else
+  ac_cv_header_time=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
+$as_echo "$ac_cv_header_time" >&6; }
+if test $ac_cv_header_time = yes; then
+
+$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
+
+fi
+
+for ac_header in stdlib.h locale.h unistd.h limits.h fcntl.h string.h \
+                  memory.h sys/param.h sys/resource.h sys/time.h sys/timeb.h \
+                  sys/select.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this sort of thing.  */
+  typedef int charset[2];
+  const charset cs = { 0, 0 };
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_const=yes
+else
+  ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if ${ac_cv_type_signal+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <signal.h>
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_type_signal=int
+else
+  ac_cv_type_signal=void
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5
+$as_echo_n "checking for uid_t in sys/types.h... " >&6; }
+if ${ac_cv_type_uid_t+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "uid_t" >/dev/null 2>&1; then :
+  ac_cv_type_uid_t=yes
+else
+  ac_cv_type_uid_t=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5
+$as_echo "$ac_cv_type_uid_t" >&6; }
+if test $ac_cv_type_uid_t = no; then
+
+$as_echo "#define uid_t int" >>confdefs.h
+
+
+$as_echo "#define gid_t int" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default"
+if test "x$ac_cv_type_off_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define off_t long int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default"
+if test "x$ac_cv_type_ssize_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define ssize_t int
+_ACEOF
+
+fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for unsigned long long int" >&5
+$as_echo_n "checking for unsigned long long int... " >&6; }
+if ${ac_cv_type_unsigned_long_long_int+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_type_unsigned_long_long_int=yes
+     if test "x${ac_cv_prog_cc_c99-no}" = xno; then
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+  /* For now, do not test the preprocessor; as of 2007 there are too many
+         implementations with broken preprocessors.  Perhaps this can
+         be revisited in 2012.  In the meantime, code should not expect
+         #if to work with literals wider than 32 bits.  */
+      /* Test literals.  */
+      long long int ll = 9223372036854775807ll;
+      long long int nll = -9223372036854775807LL;
+      unsigned long long int ull = 18446744073709551615ULL;
+      /* Test constant expressions.   */
+      typedef int a[((-9223372036854775807LL < 0 && 0 < 9223372036854775807ll)
+                     ? 1 : -1)];
+      typedef int b[(18446744073709551615ULL <= (unsigned long long int) -1
+                     ? 1 : -1)];
+      int i = 63;
+int
+main ()
+{
+/* Test availability of runtime routines for shift and division.  */
+      long long int llmax = 9223372036854775807ll;
+      unsigned long long int ullmax = 18446744073709551615ull;
+      return ((ll << 63) | (ll >> 63) | (ll < i) | (ll > i)
+              | (llmax / ll) | (llmax % ll)
+              | (ull << 63) | (ull >> 63) | (ull << i) | (ull >> i)
+              | (ullmax / ull) | (ullmax % ull));
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+else
+  ac_cv_type_unsigned_long_long_int=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_unsigned_long_long_int" >&5
+$as_echo "$ac_cv_type_unsigned_long_long_int" >&6; }
+  if test $ac_cv_type_unsigned_long_long_int = yes; then
+
+$as_echo "#define HAVE_UNSIGNED_LONG_LONG_INT 1" >>confdefs.h
+
+  fi
+
+
+
+  ac_fn_c_check_type "$LINENO" "uintmax_t" "ac_cv_type_uintmax_t" "$ac_includes_default"
+if test "x$ac_cv_type_uintmax_t" = xyes; then :
+
+$as_echo "#define HAVE_UINTMAX_T 1" >>confdefs.h
+
+else
+  test $ac_cv_type_unsigned_long_long_int = yes \
+       && ac_type='unsigned long long int' \
+       || ac_type='unsigned long int'
+
+cat >>confdefs.h <<_ACEOF
+#define uintmax_t $ac_type
+_ACEOF
+
+fi
+
+
+
+# Find out whether our struct stat returns nanosecond resolution timestamps.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for nanoseconds field of struct stat" >&5
+$as_echo_n "checking for nanoseconds field of struct stat... " >&6; }
+if ${ac_cv_struct_st_mtim_nsec+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_CPPFLAGS="$CPPFLAGS"
+    ac_cv_struct_st_mtim_nsec=no
+    # st_mtim.tv_nsec -- the usual case
+    # st_mtim._tv_nsec -- Solaris 2.6, if
+    #	(defined _XOPEN_SOURCE && _XOPEN_SOURCE_EXTENDED == 1
+    #	 && !defined __EXTENSIONS__)
+    # st_mtim.st__tim.tv_nsec -- UnixWare 2.1.2
+    # st_mtime_n -- AIX 5.2 and above
+    # st_mtimespec.tv_nsec -- Darwin (Mac OSX)
+    for ac_val in st_mtim.tv_nsec st_mtim._tv_nsec st_mtim.st__tim.tv_nsec st_mtime_n st_mtimespec.tv_nsec; do
+      CPPFLAGS="$ac_save_CPPFLAGS -DST_MTIM_NSEC=$ac_val"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/stat.h>
+
+int
+main ()
+{
+struct stat s; s.ST_MTIM_NSEC;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_struct_st_mtim_nsec=$ac_val; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    done
+    CPPFLAGS="$ac_save_CPPFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_st_mtim_nsec" >&5
+$as_echo "$ac_cv_struct_st_mtim_nsec" >&6; }
+
+  if test $ac_cv_struct_st_mtim_nsec != no; then
+
+cat >>confdefs.h <<_ACEOF
+#define ST_MTIM_NSEC $ac_cv_struct_st_mtim_nsec
+_ACEOF
+
+  fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use high resolution file timestamps" >&5
+$as_echo_n "checking whether to use high resolution file timestamps... " >&6; }
+if ${make_cv_file_timestamp_hi_res+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   make_cv_file_timestamp_hi_res=no
+  if test "$ac_cv_struct_st_mtim_nsec" != no; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+int
+main ()
+{
+char a[0x7fffffff < (uintmax_t)-1 >> 30 ? 1 : -1];
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  make_cv_file_timestamp_hi_res=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_file_timestamp_hi_res" >&5
+$as_echo "$make_cv_file_timestamp_hi_res" >&6; }
+if test "$make_cv_file_timestamp_hi_res" = yes; then :
+  val=1
+else
+  val=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define FILE_TIMESTAMP_HI_RES $val
+_ACEOF
+
+
+if test "$make_cv_file_timestamp_hi_res" = yes; then :
+   # Solaris 2.5.1 needs -lposix4 to get the clock_gettime function.
+  # Solaris 7 prefers the library name -lrt to the obsolescent name -lposix4.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5
+$as_echo_n "checking for library containing clock_gettime... " >&6; }
+if ${ac_cv_search_clock_gettime+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char clock_gettime ();
+int
+main ()
+{
+return clock_gettime ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' rt posix4; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_clock_gettime=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_clock_gettime+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_clock_gettime+:} false; then :
+
+else
+  ac_cv_search_clock_gettime=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5
+$as_echo "$ac_cv_search_clock_gettime" >&6; }
+ac_res=$ac_cv_search_clock_gettime
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+fi
+
+  if test "$ac_cv_search_clock_gettime" != no; then :
+
+$as_echo "#define HAVE_CLOCK_GETTIME 1" >>confdefs.h
+
+
+fi
+
+fi
+
+# Check for DOS-style pathnames.
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether system uses MSDOS-style paths" >&5
+$as_echo_n "checking whether system uses MSDOS-style paths... " >&6; }
+if ${ac_cv_dos_paths+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#if !defined _WIN32 && !defined __WIN32__ && !defined __MSDOS__ && !defined __EMX__ && !defined __MSYS__ && !defined __CYGWIN__
+neither MSDOS nor Windows nor OS2
+#endif
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_dos_paths=yes
+else
+  ac_cv_dos_paths=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_dos_paths" >&5
+$as_echo "$ac_cv_dos_paths" >&6; }
+
+  if test x"$ac_cv_dos_paths" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DOS_PATHS 1
+_ACEOF
+
+fi
+
+
+# See if we have a standard version of gettimeofday().  Since actual
+# implementations can differ, just make sure we have the most common
+# one.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for standard gettimeofday" >&5
+$as_echo_n "checking for standard gettimeofday... " >&6; }
+if ${ac_cv_func_gettimeofday+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_func_gettimeofday=no
+   if test "$cross_compiling" = yes; then :
+  ac_cv_func_gettimeofday="no (cross-compiling)"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/time.h>
+                  int main ()
+                  {
+                    struct timeval t; t.tv_sec = -1; t.tv_usec = -1;
+                    exit (gettimeofday (&t, 0) != 0
+                          || t.tv_sec < 0 || t.tv_usec < 0);
+                  }
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_gettimeofday=yes
+else
+  ac_cv_func_gettimeofday=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_gettimeofday" >&5
+$as_echo "$ac_cv_func_gettimeofday" >&6; }
+if test "$ac_cv_func_gettimeofday" = yes; then :
+
+$as_echo "#define HAVE_GETTIMEOFDAY 1" >>confdefs.h
+
+
+fi
+
+for ac_func in strdup strndup umask mkstemp mktemp fdopen fileno \
+                dup dup2 getcwd realpath sigsetmask sigaction \
+                getgroups seteuid setegid setlinebuf setreuid setregid \
+                getrlimit setrlimit setvbuf pipe strerror strsignal \
+                lstat readlink atexit isatty ttyname pselect
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# We need to check declarations, not just existence, because on Tru64 this
+# function is not declared without special flags, which themselves cause
+# other problems.  We'll just use our own.
+ac_fn_c_check_decl "$LINENO" "bsd_signal" "ac_cv_have_decl_bsd_signal" "#define _GNU_SOURCE 1
+#include <signal.h>
+"
+if test "x$ac_cv_have_decl_bsd_signal" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_BSD_SIGNAL $ac_have_decl
+_ACEOF
+
+
+for ac_header in vfork.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default"
+if test "x$ac_cv_header_vfork_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_VFORK_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in fork vfork
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+if test "x$ac_cv_func_fork" = xyes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5
+$as_echo_n "checking for working fork... " >&6; }
+if ${ac_cv_func_fork_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_fork_works=cross
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+
+	  /* By Ruediger Kuhlmann. */
+	  return fork () < 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_fork_works=yes
+else
+  ac_cv_func_fork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5
+$as_echo "$ac_cv_func_fork_works" >&6; }
+
+else
+  ac_cv_func_fork_works=$ac_cv_func_fork
+fi
+if test "x$ac_cv_func_fork_works" = xcross; then
+  case $host in
+    *-*-amigaos* | *-*-msdosdjgpp*)
+      # Override, as these systems have only a dummy fork() stub
+      ac_cv_func_fork_works=no
+      ;;
+    *)
+      ac_cv_func_fork_works=yes
+      ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;}
+fi
+ac_cv_func_vfork_works=$ac_cv_func_vfork
+if test "x$ac_cv_func_vfork" = xyes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5
+$as_echo_n "checking for working vfork... " >&6; }
+if ${ac_cv_func_vfork_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_vfork_works=cross
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Thanks to Paul Eggert for this test.  */
+$ac_includes_default
+#include <sys/wait.h>
+#ifdef HAVE_VFORK_H
+# include <vfork.h>
+#endif
+/* On some sparc systems, changes by the child to local and incoming
+   argument registers are propagated back to the parent.  The compiler
+   is told about this with #include <vfork.h>, but some compilers
+   (e.g. gcc -O) don't grok <vfork.h>.  Test for this by using a
+   static variable whose address is put into a register that is
+   clobbered by the vfork.  */
+static void
+#ifdef __cplusplus
+sparc_address_test (int arg)
+# else
+sparc_address_test (arg) int arg;
+#endif
+{
+  static pid_t child;
+  if (!child) {
+    child = vfork ();
+    if (child < 0) {
+      perror ("vfork");
+      _exit(2);
+    }
+    if (!child) {
+      arg = getpid();
+      write(-1, "", 0);
+      _exit (arg);
+    }
+  }
+}
+
+int
+main ()
+{
+  pid_t parent = getpid ();
+  pid_t child;
+
+  sparc_address_test (0);
+
+  child = vfork ();
+
+  if (child == 0) {
+    /* Here is another test for sparc vfork register problems.  This
+       test uses lots of local variables, at least as many local
+       variables as main has allocated so far including compiler
+       temporaries.  4 locals are enough for gcc 1.40.3 on a Solaris
+       4.1.3 sparc, but we use 8 to be safe.  A buggy compiler should
+       reuse the register of parent for one of the local variables,
+       since it will think that parent can't possibly be used any more
+       in this routine.  Assigning to the local variable will thus
+       munge parent in the parent process.  */
+    pid_t
+      p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(),
+      p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid();
+    /* Convince the compiler that p..p7 are live; otherwise, it might
+       use the same hardware register for all 8 local variables.  */
+    if (p != p1 || p != p2 || p != p3 || p != p4
+	|| p != p5 || p != p6 || p != p7)
+      _exit(1);
+
+    /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent
+       from child file descriptors.  If the child closes a descriptor
+       before it execs or exits, this munges the parent's descriptor
+       as well.  Test for this by closing stdout in the child.  */
+    _exit(close(fileno(stdout)) != 0);
+  } else {
+    int status;
+    struct stat st;
+
+    while (wait(&status) != child)
+      ;
+    return (
+	 /* Was there some problem with vforking?  */
+	 child < 0
+
+	 /* Did the child fail?  (This shouldn't happen.)  */
+	 || status
+
+	 /* Did the vfork/compiler bug occur?  */
+	 || parent != getpid()
+
+	 /* Did the file descriptor bug occur?  */
+	 || fstat(fileno(stdout), &st) != 0
+	 );
+  }
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_vfork_works=yes
+else
+  ac_cv_func_vfork_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5
+$as_echo "$ac_cv_func_vfork_works" >&6; }
+
+fi;
+if test "x$ac_cv_func_fork_works" = xcross; then
+  ac_cv_func_vfork_works=$ac_cv_func_vfork
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5
+$as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;}
+fi
+
+if test "x$ac_cv_func_vfork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h
+
+else
+
+$as_echo "#define vfork fork" >>confdefs.h
+
+fi
+if test "x$ac_cv_func_fork_works" = xyes; then
+
+$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h
+
+fi
+
+
+if ${ac_cv_func_setvbuf_reversed+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_func_setvbuf_reversed=no
+fi
+
+
+
+# Rumor has it that strcasecmp lives in -lresolv on some odd systems.
+# It doesn't hurt much to use our own if we can't find it so I don't
+# make the effort here.
+for ac_func in strcasecmp strncasecmp strcmpi strncmpi stricmp strnicmp
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# strcoll() is used by the GNU glob library
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strcoll" >&5
+$as_echo_n "checking for working strcoll... " >&6; }
+if ${ac_cv_func_strcoll_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_strcoll_works=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+return (strcoll ("abc", "def") >= 0 ||
+	 strcoll ("ABC", "DEF") >= 0 ||
+	 strcoll ("123", "456") >= 0)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_strcoll_works=yes
+else
+  ac_cv_func_strcoll_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strcoll_works" >&5
+$as_echo "$ac_cv_func_strcoll_works" >&6; }
+if test $ac_cv_func_strcoll_works = yes; then
+
+$as_echo "#define HAVE_STRCOLL 1" >>confdefs.h
+
+fi
+
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
+$as_echo_n "checking for working alloca.h... " >&6; }
+if ${ac_cv_working_alloca_h+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <alloca.h>
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+			  if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_working_alloca_h=yes
+else
+  ac_cv_working_alloca_h=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
+$as_echo "$ac_cv_working_alloca_h" >&6; }
+if test $ac_cv_working_alloca_h = yes; then
+
+$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
+$as_echo_n "checking for alloca... " >&6; }
+if ${ac_cv_func_alloca_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+void *alloca (size_t);
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int
+main ()
+{
+char *p = (char *) alloca (1);
+				    if (p) return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_alloca_works=yes
+else
+  ac_cv_func_alloca_works=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
+$as_echo "$ac_cv_func_alloca_works" >&6; }
+
+if test $ac_cv_func_alloca_works = yes; then
+
+$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
+
+else
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble.  Some versions do not even contain alloca or
+# contain a buggy version.  If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
+
+$as_echo "#define C_ALLOCA 1" >>confdefs.h
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
+$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
+if ${ac_cv_os_cray+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined CRAY && ! defined CRAY2
+webecray
+#else
+wenotbecray
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "webecray" >/dev/null 2>&1; then :
+  ac_cv_os_cray=yes
+else
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
+$as_echo "$ac_cv_os_cray" >&6; }
+if test $ac_cv_os_cray = yes; then
+  for ac_func in _getb67 GETB67 getb67; do
+    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+
+    break
+fi
+
+  done
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
+$as_echo_n "checking stack direction for C alloca... " >&6; }
+if ${ac_cv_c_stack_direction+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_c_stack_direction=0
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+find_stack_direction (int *addr, int depth)
+{
+  int dir, dummy = 0;
+  if (! addr)
+    addr = &dummy;
+  *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
+  dir = depth ? find_stack_direction (addr, depth - 1) : 0;
+  return dir + dummy;
+}
+
+int
+main (int argc, char **argv)
+{
+  return find_stack_direction (0, argc + !argv + 20) < 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_stack_direction=1
+else
+  ac_cv_c_stack_direction=-1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
+$as_echo "$ac_cv_c_stack_direction" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether closedir returns void" >&5
+$as_echo_n "checking whether closedir returns void... " >&6; }
+if ${ac_cv_func_closedir_void+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_closedir_void=yes
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header_dirent>
+#ifndef __cplusplus
+int closedir ();
+#endif
+
+int
+main ()
+{
+return closedir (opendir (".")) != 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_closedir_void=no
+else
+  ac_cv_func_closedir_void=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_closedir_void" >&5
+$as_echo "$ac_cv_func_closedir_void" >&6; }
+if test $ac_cv_func_closedir_void = yes; then
+
+$as_echo "#define CLOSEDIR_VOID 1" >>confdefs.h
+
+fi
+
+
+# See if the user wants to add (or not) GNU Guile support
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+  ac_pt_PKG_CONFIG=$PKG_CONFIG
+  # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $ac_pt_PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_pt_PKG_CONFIG" = x; then
+    PKG_CONFIG=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    PKG_CONFIG=$ac_pt_PKG_CONFIG
+  fi
+else
+  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=0.9.0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	else
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+		PKG_CONFIG=""
+	fi
+fi
+
+# Check whether --with-guile was given.
+if test "${with_guile+set}" = set; then :
+  withval=$with_guile;
+fi
+
+
+# For some strange reason, at least on Ubuntu, each version of Guile
+# comes with it's own PC file so we have to specify them as individual
+# packages.  Ugh.
+if test "x$with_guile" != xno; then :
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUILE" >&5
+$as_echo_n "checking for GUILE... " >&6; }
+
+if test -n "$GUILE_CFLAGS"; then
+    pkg_cv_GUILE_CFLAGS="$GUILE_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-2.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-2.0") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_CFLAGS=`$PKG_CONFIG --cflags "guile-2.0" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$GUILE_LIBS"; then
+    pkg_cv_GUILE_LIBS="$GUILE_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-2.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-2.0") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_LIBS=`$PKG_CONFIG --libs "guile-2.0" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "guile-2.0" 2>&1`
+        else
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "guile-2.0" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$GUILE_PKG_ERRORS" >&5
+
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUILE" >&5
+$as_echo_n "checking for GUILE... " >&6; }
+
+if test -n "$GUILE_CFLAGS"; then
+    pkg_cv_GUILE_CFLAGS="$GUILE_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_CFLAGS=`$PKG_CONFIG --cflags "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$GUILE_LIBS"; then
+    pkg_cv_GUILE_LIBS="$GUILE_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_LIBS=`$PKG_CONFIG --libs "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "guile-1.8" 2>&1`
+        else
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "guile-1.8" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$GUILE_PKG_ERRORS" >&5
+
+	have_guile=no
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	have_guile=no
+else
+	GUILE_CFLAGS=$pkg_cv_GUILE_CFLAGS
+	GUILE_LIBS=$pkg_cv_GUILE_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	have_guile=yes
+fi
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GUILE" >&5
+$as_echo_n "checking for GUILE... " >&6; }
+
+if test -n "$GUILE_CFLAGS"; then
+    pkg_cv_GUILE_CFLAGS="$GUILE_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_CFLAGS=`$PKG_CONFIG --cflags "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$GUILE_LIBS"; then
+    pkg_cv_GUILE_LIBS="$GUILE_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"guile-1.8\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "guile-1.8") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_GUILE_LIBS=`$PKG_CONFIG --libs "guile-1.8" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+   	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "guile-1.8" 2>&1`
+        else
+	        GUILE_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "guile-1.8" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$GUILE_PKG_ERRORS" >&5
+
+	have_guile=no
+elif test $pkg_failed = untried; then
+     	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+	have_guile=no
+else
+	GUILE_CFLAGS=$pkg_cv_GUILE_CFLAGS
+	GUILE_LIBS=$pkg_cv_GUILE_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	have_guile=yes
+fi
+else
+	GUILE_CFLAGS=$pkg_cv_GUILE_CFLAGS
+	GUILE_LIBS=$pkg_cv_GUILE_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	have_guile=yes
+fi
+
+fi
+
+if test "$have_guile" = yes; then :
+
+$as_echo "#define HAVE_GUILE 1" >>confdefs.h
+
+fi
+
+ if test "$have_guile" = yes; then
+  HAVE_GUILE_TRUE=
+  HAVE_GUILE_FALSE='#'
+else
+  HAVE_GUILE_TRUE='#'
+  HAVE_GUILE_FALSE=
+fi
+
+
+ac_have_func=no # yes means we've found a way to get the load average.
+
+# Make sure getloadavg.c is where it belongs, at configure-time.
+test -f "$srcdir/$ac_config_libobj_dir/getloadavg.c" ||
+  as_fn_error $? "$srcdir/$ac_config_libobj_dir/getloadavg.c is missing" "$LINENO" 5
+
+ac_save_LIBS=$LIBS
+
+# Check for getloadavg, but be sure not to touch the cache variable.
+(ac_fn_c_check_func "$LINENO" "getloadavg" "ac_cv_func_getloadavg"
+if test "x$ac_cv_func_getloadavg" = xyes; then :
+  exit 0
+else
+  exit 1
+fi
+) && ac_have_func=yes
+
+# On HPUX9, an unprivileged user can get load averages through this function.
+for ac_func in pstat_getdynamic
+do :
+  ac_fn_c_check_func "$LINENO" "pstat_getdynamic" "ac_cv_func_pstat_getdynamic"
+if test "x$ac_cv_func_pstat_getdynamic" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_PSTAT_GETDYNAMIC 1
+_ACEOF
+
+fi
+done
+
+
+# Solaris has libkstat which does not require root.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for kstat_open in -lkstat" >&5
+$as_echo_n "checking for kstat_open in -lkstat... " >&6; }
+if ${ac_cv_lib_kstat_kstat_open+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lkstat  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char kstat_open ();
+int
+main ()
+{
+return kstat_open ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_kstat_kstat_open=yes
+else
+  ac_cv_lib_kstat_kstat_open=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kstat_kstat_open" >&5
+$as_echo "$ac_cv_lib_kstat_kstat_open" >&6; }
+if test "x$ac_cv_lib_kstat_kstat_open" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBKSTAT 1
+_ACEOF
+
+  LIBS="-lkstat $LIBS"
+
+fi
+
+test $ac_cv_lib_kstat_kstat_open = yes && ac_have_func=yes
+
+# Some systems with -lutil have (and need) -lkvm as well, some do not.
+# On Solaris, -lkvm requires nlist from -lelf, so check that first
+# to get the right answer into the cache.
+# For kstat on solaris, we need libelf to force the definition of SVR4 below.
+if test $ac_have_func = no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for elf_begin in -lelf" >&5
+$as_echo_n "checking for elf_begin in -lelf... " >&6; }
+if ${ac_cv_lib_elf_elf_begin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lelf  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char elf_begin ();
+int
+main ()
+{
+return elf_begin ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_elf_elf_begin=yes
+else
+  ac_cv_lib_elf_elf_begin=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_elf_elf_begin" >&5
+$as_echo "$ac_cv_lib_elf_elf_begin" >&6; }
+if test "x$ac_cv_lib_elf_elf_begin" = xyes; then :
+  LIBS="-lelf $LIBS"
+fi
+
+fi
+if test $ac_have_func = no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for kvm_open in -lkvm" >&5
+$as_echo_n "checking for kvm_open in -lkvm... " >&6; }
+if ${ac_cv_lib_kvm_kvm_open+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lkvm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char kvm_open ();
+int
+main ()
+{
+return kvm_open ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_kvm_kvm_open=yes
+else
+  ac_cv_lib_kvm_kvm_open=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kvm_kvm_open" >&5
+$as_echo "$ac_cv_lib_kvm_kvm_open" >&6; }
+if test "x$ac_cv_lib_kvm_kvm_open" = xyes; then :
+  LIBS="-lkvm $LIBS"
+fi
+
+  # Check for the 4.4BSD definition of getloadavg.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for getloadavg in -lutil" >&5
+$as_echo_n "checking for getloadavg in -lutil... " >&6; }
+if ${ac_cv_lib_util_getloadavg+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lutil  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getloadavg ();
+int
+main ()
+{
+return getloadavg ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_util_getloadavg=yes
+else
+  ac_cv_lib_util_getloadavg=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_getloadavg" >&5
+$as_echo "$ac_cv_lib_util_getloadavg" >&6; }
+if test "x$ac_cv_lib_util_getloadavg" = xyes; then :
+  LIBS="-lutil $LIBS" ac_have_func=yes ac_cv_func_getloadavg_setgid=yes
+fi
+
+fi
+
+if test $ac_have_func = no; then
+  # There is a commonly available library for RS/6000 AIX.
+  # Since it is not a standard part of AIX, it might be installed locally.
+  ac_getloadavg_LIBS=$LIBS
+  LIBS="-L/usr/local/lib $LIBS"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for getloadavg in -lgetloadavg" >&5
+$as_echo_n "checking for getloadavg in -lgetloadavg... " >&6; }
+if ${ac_cv_lib_getloadavg_getloadavg+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgetloadavg  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char getloadavg ();
+int
+main ()
+{
+return getloadavg ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_getloadavg_getloadavg=yes
+else
+  ac_cv_lib_getloadavg_getloadavg=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_getloadavg_getloadavg" >&5
+$as_echo "$ac_cv_lib_getloadavg_getloadavg" >&6; }
+if test "x$ac_cv_lib_getloadavg_getloadavg" = xyes; then :
+  LIBS="-lgetloadavg $LIBS"
+else
+  LIBS=$ac_getloadavg_LIBS
+fi
+
+fi
+
+# Make sure it is really in the library, if we think we found it,
+# otherwise set up the replacement function.
+for ac_func in getloadavg
+do :
+  ac_fn_c_check_func "$LINENO" "getloadavg" "ac_cv_func_getloadavg"
+if test "x$ac_cv_func_getloadavg" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETLOADAVG 1
+_ACEOF
+
+else
+  case " $LIBOBJS " in
+  *" getloadavg.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS getloadavg.$ac_objext"
+ ;;
+esac
+
+
+$as_echo "#define C_GETLOADAVG 1" >>confdefs.h
+
+# Figure out what our getloadavg.c needs.
+ac_have_func=no
+ac_fn_c_check_header_mongrel "$LINENO" "sys/dg_sys_info.h" "ac_cv_header_sys_dg_sys_info_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_dg_sys_info_h" = xyes; then :
+  ac_have_func=yes
+
+$as_echo "#define DGUX 1" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dg_sys_info in -ldgc" >&5
+$as_echo_n "checking for dg_sys_info in -ldgc... " >&6; }
+if ${ac_cv_lib_dgc_dg_sys_info+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldgc  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dg_sys_info ();
+int
+main ()
+{
+return dg_sys_info ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dgc_dg_sys_info=yes
+else
+  ac_cv_lib_dgc_dg_sys_info=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dgc_dg_sys_info" >&5
+$as_echo "$ac_cv_lib_dgc_dg_sys_info" >&6; }
+if test "x$ac_cv_lib_dgc_dg_sys_info" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBDGC 1
+_ACEOF
+
+  LIBS="-ldgc $LIBS"
+
+fi
+
+fi
+
+
+
+ac_fn_c_check_header_mongrel "$LINENO" "locale.h" "ac_cv_header_locale_h" "$ac_includes_default"
+if test "x$ac_cv_header_locale_h" = xyes; then :
+
+fi
+
+
+for ac_func in setlocale
+do :
+  ac_fn_c_check_func "$LINENO" "setlocale" "ac_cv_func_setlocale"
+if test "x$ac_cv_func_setlocale" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_SETLOCALE 1
+_ACEOF
+
+fi
+done
+
+
+# We cannot check for <dwarf.h>, because Solaris 2 does not use dwarf (it
+# uses stabs), but it is still SVR4.  We cannot check for <elf.h> because
+# Irix 4.0.5F has the header but not the library.
+if test $ac_have_func = no && test "$ac_cv_lib_elf_elf_begin" = yes \
+    && test "$ac_cv_lib_kvm_kvm_open" = yes; then
+  ac_have_func=yes
+
+$as_echo "#define SVR4 1" >>confdefs.h
+
+fi
+
+if test $ac_have_func = no; then
+  ac_fn_c_check_header_mongrel "$LINENO" "inq_stats/cpustats.h" "ac_cv_header_inq_stats_cpustats_h" "$ac_includes_default"
+if test "x$ac_cv_header_inq_stats_cpustats_h" = xyes; then :
+  ac_have_func=yes
+
+$as_echo "#define UMAX 1" >>confdefs.h
+
+
+$as_echo "#define UMAX4_3 1" >>confdefs.h
+
+fi
+
+
+fi
+
+if test $ac_have_func = no; then
+  ac_fn_c_check_header_mongrel "$LINENO" "sys/cpustats.h" "ac_cv_header_sys_cpustats_h" "$ac_includes_default"
+if test "x$ac_cv_header_sys_cpustats_h" = xyes; then :
+  ac_have_func=yes; $as_echo "#define UMAX 1" >>confdefs.h
+
+fi
+
+
+fi
+
+if test $ac_have_func = no; then
+  for ac_header in mach/mach.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "mach/mach.h" "ac_cv_header_mach_mach_h" "$ac_includes_default"
+if test "x$ac_cv_header_mach_mach_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_MACH_MACH_H 1
+_ACEOF
+
+fi
+
+done
+
+fi
+
+for ac_header in nlist.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "nlist.h" "ac_cv_header_nlist_h" "$ac_includes_default"
+if test "x$ac_cv_header_nlist_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_NLIST_H 1
+_ACEOF
+ ac_fn_c_check_member "$LINENO" "struct nlist" "n_un.n_name" "ac_cv_member_struct_nlist_n_un_n_name" "#include <nlist.h>
+"
+if test "x$ac_cv_member_struct_nlist_n_un_n_name" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STRUCT_NLIST_N_UN_N_NAME 1
+_ACEOF
+
+
+$as_echo "#define NLIST_NAME_UNION 1" >>confdefs.h
+
+fi
+
+
+fi
+
+done
+
+fi
+done
+
+
+# Some definitions of getloadavg require that the program be installed setgid.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getloadavg requires setgid" >&5
+$as_echo_n "checking whether getloadavg requires setgid... " >&6; }
+if ${ac_cv_func_getloadavg_setgid+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include "$srcdir/$ac_config_libobj_dir/getloadavg.c"
+#ifdef LDAV_PRIVILEGED
+Yowza Am I SETGID yet
+#endif
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "Yowza Am I SETGID yet" >/dev/null 2>&1; then :
+  ac_cv_func_getloadavg_setgid=yes
+else
+  ac_cv_func_getloadavg_setgid=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_getloadavg_setgid" >&5
+$as_echo "$ac_cv_func_getloadavg_setgid" >&6; }
+if test $ac_cv_func_getloadavg_setgid = yes; then
+  NEED_SETGID=true
+
+$as_echo "#define GETLOADAVG_PRIVILEGED 1" >>confdefs.h
+
+else
+  NEED_SETGID=false
+fi
+
+if test $ac_cv_func_getloadavg_setgid = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking group of /dev/kmem" >&5
+$as_echo_n "checking group of /dev/kmem... " >&6; }
+if ${ac_cv_group_kmem+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   # On Solaris, /dev/kmem is a symlink.  Get info on the real file.
+  ac_ls_output=`ls -lgL /dev/kmem 2>/dev/null`
+  # If we got an error (system does not support symlinks), try without -L.
+  test -z "$ac_ls_output" && ac_ls_output=`ls -lg /dev/kmem`
+  ac_cv_group_kmem=`$as_echo "$ac_ls_output" \
+    | sed -ne 's/[	 ][	 ]*/ /g;
+	       s/^.[sSrwx-]* *[0-9]* *\([^0-9]*\)  *.*/\1/;
+	       / /s/.* //;p;'`
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_group_kmem" >&5
+$as_echo "$ac_cv_group_kmem" >&6; }
+  KMEM_GROUP=$ac_cv_group_kmem
+fi
+if test "x$ac_save_LIBS" = x; then
+  GETLOADAVG_LIBS=$LIBS
+else
+  GETLOADAVG_LIBS=`$as_echo "$LIBS" | sed "s|$ac_save_LIBS||"`
+fi
+LIBS=$ac_save_LIBS
+
+
+
+# AC_FUNC_GETLOADAVG is documented to set the NLIST_STRUCT value, but it
+# doesn't.  So, we will.
+
+if test "$ac_cv_header_nlist_h" = yes; then :
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <nlist.h>
+int
+main ()
+{
+struct nlist nl;
+          nl.n_name = "string";
+          return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  make_cv_nlist_struct=yes
+else
+  make_cv_nlist_struct=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  if test "$make_cv_nlist_struct" = yes; then :
+
+$as_echo "#define NLIST_STRUCT 1" >>confdefs.h
+
+
+fi
+
+fi
+
+ac_fn_c_check_decl "$LINENO" "sys_siglist" "ac_cv_have_decl_sys_siglist" "$ac_includes_default
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl_sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SYS_SIGLIST $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "_sys_siglist" "ac_cv_have_decl__sys_siglist" "$ac_includes_default
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl__sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL__SYS_SIGLIST $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "__sys_siglist" "ac_cv_have_decl___sys_siglist" "$ac_includes_default
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl___sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL___SYS_SIGLIST $ac_have_decl
+_ACEOF
+
+
+
+# Check out the wait reality.
+for ac_header in sys/wait.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "sys/wait.h" "ac_cv_header_sys_wait_h" "#include <sys/types.h>
+"
+if test "x$ac_cv_header_sys_wait_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_SYS_WAIT_H 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in waitpid wait3
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for union wait" >&5
+$as_echo_n "checking for union wait... " >&6; }
+if ${make_cv_union_wait+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+#include <sys/wait.h>
+int
+main ()
+{
+union wait status; int pid; pid = wait (&status);
+#ifdef WEXITSTATUS
+/* Some POSIXoid systems have both the new-style macros and the old
+   union wait type, and they do not work together.  If union wait
+   conflicts with WEXITSTATUS et al, we don't want to use it at all.  */
+        if (WEXITSTATUS (status) != 0) pid = -1;
+#ifdef WTERMSIG
+        /* If we have WEXITSTATUS and WTERMSIG, just use them on ints.  */
+        -- blow chunks here --
+#endif
+#endif
+#ifdef HAVE_WAITPID
+        /* Make sure union wait works with waitpid.  */
+        pid = waitpid (-1, &status, 0);
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  make_cv_union_wait=yes
+else
+  make_cv_union_wait=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_union_wait" >&5
+$as_echo "$make_cv_union_wait" >&6; }
+if test "$make_cv_union_wait" = yes; then :
+
+$as_echo "#define HAVE_UNION_WAIT 1" >>confdefs.h
+
+
+fi
+
+
+# If we're building on Windows/DOS/OS/2, add some support for DOS drive specs.
+if test "$PATH_SEPARATOR" = ';'; then :
+
+$as_echo "#define HAVE_DOS_PATHS 1" >>confdefs.h
+
+
+fi
+
+# See if the user wants to use pmake's "customs" distributed build capability
+ REMOTE=stub
+use_customs=false
+
+# Check whether --with-customs was given.
+if test "${with_customs+set}" = set; then :
+  withval=$with_customs;  case $withval in #(
+  n|no) :
+    : ;; #(
+  *) :
+    make_cppflags="$CPPFLAGS"
+     case $withval in #(
+  y|ye|yes) :
+    : ;; #(
+  *) :
+    CPPFLAGS="$CPPFLAGS -I$with_customs/include/customs"
+              make_ldflags="$LDFLAGS -L$with_customs/lib" ;;
+esac
+
+cf_test_netlibs=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for network libraries" >&5
+$as_echo_n "checking for network libraries... " >&6; }
+if ${cf_cv_netlibs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: working..." >&5
+$as_echo "working..." >&6; }
+cf_cv_netlibs=""
+cf_test_netlibs=yes
+for ac_func in gethostname
+do :
+  ac_fn_c_check_func "$LINENO" "gethostname" "ac_cv_func_gethostname"
+if test "x$ac_cv_func_gethostname" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETHOSTNAME 1
+_ACEOF
+
+else
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostname in -lnsl" >&5
+$as_echo_n "checking for gethostname in -lnsl... " >&6; }
+if ${ac_cv_lib_nsl_gethostname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lnsl $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostname ();
+int
+main ()
+{
+return gethostname ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_nsl_gethostname=yes
+else
+  ac_cv_lib_nsl_gethostname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostname" >&5
+$as_echo "$ac_cv_lib_nsl_gethostname" >&6; }
+if test "x$ac_cv_lib_nsl_gethostname" = xyes; then :
+
+
+cf_tr_func=`echo gethostname | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_gethostname=yes
+	cf_cv_netlibs="-lnsl $cf_cv_netlibs"
+else
+
+	ac_cv_func_gethostname=unknown
+	unset ac_cv_func_gethostname 2>/dev/null
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostname in -lsocket" >&5
+$as_echo_n "checking for gethostname in -lsocket... " >&6; }
+if ${ac_cv_lib_socket_gethostname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostname ();
+int
+main ()
+{
+return gethostname ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_socket_gethostname=yes
+else
+  ac_cv_lib_socket_gethostname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_gethostname" >&5
+$as_echo "$ac_cv_lib_socket_gethostname" >&6; }
+if test "x$ac_cv_lib_socket_gethostname" = xyes; then :
+
+
+cf_tr_func=`echo gethostname | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_gethostname=yes
+	cf_cv_netlibs="-lsocket $cf_cv_netlibs"
+else
+
+	ac_cv_func_gethostname=unknown
+	unset ac_cv_func_gethostname 2>/dev/null
+
+fi
+
+
+fi
+
+
+fi
+done
+
+#
+# FIXME:  sequent needs this library (i.e., -lsocket -linet -lnsl), but
+# I don't know the entrypoints - 97/7/22 TD
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -linet" >&5
+$as_echo_n "checking for main in -linet... " >&6; }
+if ${ac_cv_lib_inet_main+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-linet  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+return main ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_inet_main=yes
+else
+  ac_cv_lib_inet_main=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_inet_main" >&5
+$as_echo "$ac_cv_lib_inet_main" >&6; }
+if test "x$ac_cv_lib_inet_main" = xyes; then :
+  cf_cv_netlibs="-linet $cf_cv_netlibs"
+fi
+
+#
+if test "$ac_cv_func_lsocket" != no ; then
+for ac_func in socket
+do :
+  ac_fn_c_check_func "$LINENO" "socket" "ac_cv_func_socket"
+if test "x$ac_cv_func_socket" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_SOCKET 1
+_ACEOF
+
+else
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lsocket" >&5
+$as_echo_n "checking for socket in -lsocket... " >&6; }
+if ${ac_cv_lib_socket_socket+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
+int
+main ()
+{
+return socket ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_socket_socket=yes
+else
+  ac_cv_lib_socket_socket=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_socket" >&5
+$as_echo "$ac_cv_lib_socket_socket" >&6; }
+if test "x$ac_cv_lib_socket_socket" = xyes; then :
+
+
+cf_tr_func=`echo socket | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_socket=yes
+	cf_cv_netlibs="-lsocket $cf_cv_netlibs"
+else
+
+	ac_cv_func_socket=unknown
+	unset ac_cv_func_socket 2>/dev/null
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lbsd" >&5
+$as_echo_n "checking for socket in -lbsd... " >&6; }
+if ${ac_cv_lib_bsd_socket+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lbsd $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char socket ();
+int
+main ()
+{
+return socket ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_bsd_socket=yes
+else
+  ac_cv_lib_bsd_socket=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_socket" >&5
+$as_echo "$ac_cv_lib_bsd_socket" >&6; }
+if test "x$ac_cv_lib_bsd_socket" = xyes; then :
+
+
+cf_tr_func=`echo socket | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_socket=yes
+	cf_cv_netlibs="-lbsd $cf_cv_netlibs"
+else
+
+	ac_cv_func_socket=unknown
+	unset ac_cv_func_socket 2>/dev/null
+
+fi
+
+
+fi
+
+
+fi
+done
+
+fi
+#
+for ac_func in gethostbyname
+do :
+  ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname"
+if test "x$ac_cv_func_gethostbyname" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_GETHOSTBYNAME 1
+_ACEOF
+
+else
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
+$as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
+if ${ac_cv_lib_nsl_gethostbyname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lnsl $cf_cv_netlibs $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostbyname ();
+int
+main ()
+{
+return gethostbyname ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_nsl_gethostbyname=yes
+else
+  ac_cv_lib_nsl_gethostbyname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
+$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
+if test "x$ac_cv_lib_nsl_gethostbyname" = xyes; then :
+
+
+cf_tr_func=`echo gethostbyname | tr '[a-z]' '[A-Z]'`
+
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_$cf_tr_func 1
+_ACEOF
+
+	ac_cv_func_gethostbyname=yes
+	cf_cv_netlibs="-lnsl $cf_cv_netlibs"
+else
+
+	ac_cv_func_gethostbyname=unknown
+	unset ac_cv_func_gethostbyname 2>/dev/null
+
+fi
+
+
+fi
+done
+
+
+fi
+
+LIBS="$LIBS $cf_cv_netlibs"
+test $cf_test_netlibs = no && echo "$cf_cv_netlibs" >&6
+
+     ac_fn_c_check_header_mongrel "$LINENO" "customs.h" "ac_cv_header_customs_h" "$ac_includes_default"
+if test "x$ac_cv_header_customs_h" = xyes; then :
+  use_customs=true
+                      REMOTE=cstms
+                      LIBS="$LIBS -lcustoms" LDFLAGS="$make_ldflags"
+else
+  with_customs=no
+                      CPPFLAGS="$make_cppflags" make_badcust=yes
+fi
+
+
+     ;;
+esac
+
+fi
+
+
+# Tell automake about this, so it can include the right .c files.
+ if test "$use_customs" = true; then
+  USE_CUSTOMS_TRUE=
+  USE_CUSTOMS_FALSE='#'
+else
+  USE_CUSTOMS_TRUE='#'
+  USE_CUSTOMS_FALSE=
+fi
+
+
+# See if the user asked to handle case insensitive file systems.
+
+# Check whether --enable-case-insensitive-file-system was given.
+if test "${enable_case_insensitive_file_system+set}" = set; then :
+  enableval=$enable_case_insensitive_file_system; if test "$enableval" = yes; then :
+  $as_echo "#define HAVE_CASE_INSENSITIVE_FS 1" >>confdefs.h
+
+fi
+fi
+
+
+# See if we can handle the job server feature, and if the user wants it.
+# Check whether --enable-job-server was given.
+if test "${enable_job_server+set}" = set; then :
+  enableval=$enable_job_server; make_cv_job_server="$enableval" user_job_server="$enableval"
+else
+  make_cv_job_server="yes"
+fi
+
+
+if test "$ac_cv_func_waitpid" = no && test "$ac_cv_func_wait3" = no; then :
+  has_wait_nohang=no
+else
+  has_wait_nohang=yes
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SA_RESTART" >&5
+$as_echo_n "checking for SA_RESTART... " >&6; }
+if ${make_cv_sa_restart+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <signal.h>
+int
+main ()
+{
+return SA_RESTART;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  make_cv_sa_restart=yes
+else
+  make_cv_sa_restart=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_sa_restart" >&5
+$as_echo "$make_cv_sa_restart" >&6; }
+
+if test "$make_cv_sa_restart" != no; then :
+
+$as_echo "#define HAVE_SA_RESTART 1" >>confdefs.h
+
+
+fi
+
+# Only allow jobserver on systems that support it
+case /$ac_cv_func_pipe/$ac_cv_func_sigaction/$make_cv_sa_restart/$has_wait_nohang/ in #(
+  */no/*) :
+    make_cv_job_server=no ;; #(
+  *) :
+     ;;
+esac
+
+# Also supported on OS2 and MinGW
+case $host_os in #(
+  os2*|mingw*) :
+    make_cv_job_server=yes ;; #(
+  *) :
+     ;;
+esac
+
+# If we support it and the user didn't disable it, build with jobserver
+case /$make_cv_job_server/$user_job_server/ in #(
+  */no/*) :
+    : no jobserver ;; #(
+  *) :
+
+$as_echo "#define MAKE_JOBSERVER 1" >>confdefs.h
+
+   ;;
+esac
+
+# If dl*() functions are supported we can enable the load operation
+ac_fn_c_check_decl "$LINENO" "dlopen" "ac_cv_have_decl_dlopen" "#include <dlfcn.h>
+"
+if test "x$ac_cv_have_decl_dlopen" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DLOPEN $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "dlsym" "ac_cv_have_decl_dlsym" "#include <dlfcn.h>
+"
+if test "x$ac_cv_have_decl_dlsym" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DLSYM $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "dlerror" "ac_cv_have_decl_dlerror" "#include <dlfcn.h>
+"
+if test "x$ac_cv_have_decl_dlerror" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DLERROR $ac_have_decl
+_ACEOF
+
+
+# Check whether --enable-load was given.
+if test "${enable_load+set}" = set; then :
+  enableval=$enable_load; make_cv_load="$enableval" user_load="$enableval"
+else
+  make_cv_load="yes"
+fi
+
+
+case /$ac_cv_have_decl_dlopen/$ac_cv_have_decl_dlsym/$ac_cv_have_decl_dlerror/ in #(
+  */no/*) :
+    make_cv_load=no ;; #(
+  *) :
+     ;;
+esac
+
+# We might need -ldl
+if test "$make_cv_load" = yes; then :
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if ${ac_cv_search_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_dlopen+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_dlopen+:} false; then :
+
+else
+  ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+else
+  make_cv_load=
+fi
+
+
+fi
+
+case /$make_cv_load/$user_load/ in #(
+  */no/*) :
+    make_cv_load=no ;; #(
+  *) :
+
+$as_echo "#define MAKE_LOAD 1" >>confdefs.h
+
+   ;;
+esac
+
+# If we want load support, we might need to link with export-dynamic.
+# See if we can figure it out.  Unfortunately this is very difficult.
+# For example passing -rdynamic to the SunPRO linker gives a warning
+# but succeeds and creates a shared object, not an executable!
+if test "$make_cv_load" = yes; then :
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking If the linker accepts -Wl,--export-dynamic" >&5
+$as_echo_n "checking If the linker accepts -Wl,--export-dynamic... " >&6; }
+  old_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int main(){}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+     AM_LDFLAGS=-Wl,--export-dynamic
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+     { $as_echo "$as_me:${as_lineno-$LINENO}: checking If the linker accepts -rdynamic" >&5
+$as_echo_n "checking If the linker accepts -rdynamic... " >&6; }
+     LDFLAGS="$old_LDFLAGS -rdynamic"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int main(){}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+        AM_LDFLAGS=-rdynamic
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS="$old_LDFLAGS"
+
+fi
+
+# if we have both lstat() and readlink() then we can support symlink
+# timechecks.
+if test "$ac_cv_func_lstat" = yes && test "$ac_cv_func_readlink" = yes; then :
+
+$as_echo "#define MAKE_SYMLINKS 1" >>confdefs.h
+
+
+fi
+
+# Find the SCCS commands, so we can include them in our default rules.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for location of SCCS get command" >&5
+$as_echo_n "checking for location of SCCS get command... " >&6; }
+if ${make_cv_path_sccs_get+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+  if test -f /usr/sccs/get; then :
+  make_cv_path_sccs_get=/usr/sccs/get
+else
+  make_cv_path_sccs_get=get
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_path_sccs_get" >&5
+$as_echo "$make_cv_path_sccs_get" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define SCCS_GET "$make_cv_path_sccs_get"
+_ACEOF
+
+
+ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later.
+if (/usr/sccs/admin -n s.conftest || admin -n s.conftest) >/dev/null 2>&1 &&
+   test -f s.conftest; then :
+   # We successfully created an SCCS file.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if SCCS get command understands -G" >&5
+$as_echo_n "checking if SCCS get command understands -G... " >&6; }
+if ${make_cv_sys_get_minus_G+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $make_cv_path_sccs_get -Gconftoast s.conftest >/dev/null 2>&1 &&
+            test -f conftoast; then :
+  make_cv_sys_get_minus_G=yes
+else
+  make_cv_sys_get_minus_G=no
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_sys_get_minus_G" >&5
+$as_echo "$make_cv_sys_get_minus_G" >&6; }
+  if test "$make_cv_sys_get_minus_G" = yes; then :
+
+$as_echo "#define SCCS_GET_MINUS_G 1" >>confdefs.h
+
+
+fi
+
+fi
+rm -f s.conftest conftoast
+
+# Check the system to see if it provides GNU glob.  If not, use our
+# local version.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if system libc has GNU glob" >&5
+$as_echo_n "checking if system libc has GNU glob... " >&6; }
+if ${make_cv_sys_gnu_glob+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <features.h>
+#include <glob.h>
+#include <fnmatch.h>
+
+#define GLOB_INTERFACE_VERSION 1
+#if !defined _LIBC && defined __GNU_LIBRARY__ && __GNU_LIBRARY__ > 1
+# include <gnu-versions.h>
+# if _GNU_GLOB_INTERFACE_VERSION == GLOB_INTERFACE_VERSION
+   gnu glob
+# endif
+#endif
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "gnu glob" >/dev/null 2>&1; then :
+  make_cv_sys_gnu_glob=yes
+else
+  make_cv_sys_gnu_glob=no
+fi
+rm -f conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $make_cv_sys_gnu_glob" >&5
+$as_echo "$make_cv_sys_gnu_glob" >&6; }
+if test "$make_cv_sys_gnu_glob" = no; then :
+   GLOBINC='-I$(srcdir)/glob'
+  GLOBLIB=glob/libglob.a
+
+fi
+
+
+
+# Tell automake about this, so it can build the right .c files.
+ if test "$make_cv_sys_gnu_glob" = no; then
+  USE_LOCAL_GLOB_TRUE=
+  USE_LOCAL_GLOB_FALSE='#'
+else
+  USE_LOCAL_GLOB_TRUE='#'
+  USE_LOCAL_GLOB_FALSE=
+fi
+
+
+# Let the makefile know what our build host is
+
+
+cat >>confdefs.h <<_ACEOF
+#define MAKE_HOST "$host"
+_ACEOF
+
+MAKE_HOST="$host"
+
+
+w32_target_env=no
+ if false; then
+  WINDOWSENV_TRUE=
+  WINDOWSENV_FALSE='#'
+else
+  WINDOWSENV_TRUE='#'
+  WINDOWSENV_FALSE=
+fi
+
+
+case $host in #(
+  *-*-mingw32) :
+     if true; then
+  WINDOWSENV_TRUE=
+  WINDOWSENV_FALSE='#'
+else
+  WINDOWSENV_TRUE='#'
+  WINDOWSENV_FALSE=
+fi
+
+    w32_target_env=yes
+
+$as_echo "#define WINDOWS32 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DOS_PATHS 1" >>confdefs.h
+
+   ;; #(
+  *) :
+     ;;
+esac
+
+
+cat >>confdefs.h <<_ACEOF
+#define PATH_SEPARATOR_CHAR '$PATH_SEPARATOR'
+_ACEOF
+
+
+# Include the Maintainer's Makefile section, if it's here.
+
+MAINT_MAKEFILE=/dev/null
+if test -r "$srcdir/maintMakefile"; then :
+   MAINT_MAKEFILE="$srcdir/maintMakefile"
+
+fi
+
+
+# Allow building with dmalloc
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if malloc debugging is wanted" >&5
+$as_echo_n "checking if malloc debugging is wanted... " >&6; }
+
+# Check whether --with-dmalloc was given.
+if test "${with_dmalloc+set}" = set; then :
+  withval=$with_dmalloc; if test "$withval" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define WITH_DMALLOC 1" >>confdefs.h
+
+  LIBS="$LIBS -ldmalloc"
+  LDFLAGS="$LDFLAGS -g"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+# Forcibly disable SET_MAKE.  If it's set it breaks things like the test
+# scripts, etc.
+SET_MAKE=
+
+# Sanity check and inform the user of what we found
+
+if test "x$make_badcust" = xyes; then :
+
+echo
+echo "WARNING: --with-customs specified but no customs.h could be found;"
+echo "         disabling Customs support."
+echo
+
+fi
+
+case $with_customs in #(
+  ""|n|no|y|ye|yes) :
+    : ;; #(
+  *) :
+    if test -f "$with_customs/lib/libcustoms.a"; then :
+  :
+else
+   echo
+  echo "WARNING: '$with_customs/lib' does not appear to contain the"
+  echo "         Customs library.  You must build and install Customs"
+  echo "         before compiling GNU make."
+  echo
+
+fi ;;
+esac
+
+if test "x$has_wait_nohang" = xno; then :
+   echo
+  echo "WARNING: Your system has neither waitpid() nor wait3()."
+  echo "         Without one of these, signal handling is unreliable."
+  echo "         You should be aware that running GNU make with -j"
+  echo "         could result in erratic behavior."
+  echo
+
+fi
+
+if test "x$make_cv_job_server" = xno && test "x$user_job_server" = xyes; then :
+   echo
+  echo "WARNING: Make job server requires a POSIX-ish system that"
+  echo "         supports the pipe(), sigaction(), and either"
+  echo "         waitpid() or wait3() functions.  Your system doesn't"
+  echo "         appear to provide one or more of those."
+  echo "         Disabling job server support."
+  echo
+
+fi
+
+if test "x$make_cv_load" = xno && test "x$user_load" = xyes; then :
+   echo
+  echo "WARNING: 'load' support requires a POSIX-ish system that"
+  echo "         supports the dlopen(), dlsym(), and dlerror() functions."
+  echo "         Your system doesn't appear to provide one or more of these."
+  echo "         Disabling 'load' support."
+  echo
+
+fi
+
+# Specify what files are to be created.
+ac_config_files="$ac_config_files Makefile glob/Makefile po/Makefile.in config/Makefile doc/Makefile w32/Makefile tests/config-flags.pm"
+
+
+# OK, do it!
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_GUILE_TRUE}" && test -z "${HAVE_GUILE_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_GUILE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_CUSTOMS_TRUE}" && test -z "${USE_CUSTOMS_FALSE}"; then
+  as_fn_error $? "conditional \"USE_CUSTOMS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_LOCAL_GLOB_TRUE}" && test -z "${USE_LOCAL_GLOB_FALSE}"; then
+  as_fn_error $? "conditional \"USE_LOCAL_GLOB\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${WINDOWSENV_TRUE}" && test -z "${WINDOWSENV_FALSE}"; then
+  as_fn_error $? "conditional \"WINDOWSENV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${WINDOWSENV_TRUE}" && test -z "${WINDOWSENV_FALSE}"; then
+  as_fn_error $? "conditional \"WINDOWSENV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by GNU make $as_me 4.2.90, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-make@gnu.org>.
+GNU make home page: <http://www.gnu.org/software/make/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+GNU make config.status 4.2.90
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+    # from automake < 1.5.
+    eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "glob/Makefile") CONFIG_FILES="$CONFIG_FILES glob/Makefile" ;;
+    "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+    "config/Makefile") CONFIG_FILES="$CONFIG_FILES config/Makefile" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+    "w32/Makefile") CONFIG_FILES="$CONFIG_FILES w32/Makefile" ;;
+    "tests/config-flags.pm") CONFIG_FILES="$CONFIG_FILES tests/config-flags.pm" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+if $AWK 'BEGIN { getline <"/dev/null" }' </dev/null 2>/dev/null; then
+  ac_cs_awk_getline=:
+  ac_cs_awk_pipe_init=
+  ac_cs_awk_read_file='
+      while ((getline aline < (F[key])) > 0)
+	print(aline)
+      close(F[key])'
+  ac_cs_awk_pipe_fini=
+else
+  ac_cs_awk_getline=false
+  ac_cs_awk_pipe_init="print \"cat <<'|#_!!_#|' &&\""
+  ac_cs_awk_read_file='
+      print "|#_!!_#|"
+      print "cat " F[key] " &&"
+      '$ac_cs_awk_pipe_init
+  # The final `:' finishes the AND list.
+  ac_cs_awk_pipe_fini='END { print "|#_!!_#|"; print ":" }'
+fi
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+# Create commands to substitute file output variables.
+{
+  echo "cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1" &&
+  echo 'cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&' &&
+  echo "$ac_subst_files" | sed 's/.*/F["&"]="$&"/' &&
+  echo "_ACAWK" &&
+  echo "_ACEOF"
+} >conf$$files.sh &&
+. ./conf$$files.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+rm -f conf$$files.sh
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+  \$ac_cs_awk_pipe_init
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+  if (nfields == 3 && !substed) {
+    key = field[2]
+    if (F[key] != "" && line ~ /^[	 ]*@.*@[	 ]*$/) {
+      \$ac_cs_awk_read_file
+      next
+    }
+  }
+  print line
+}
+\$ac_cs_awk_pipe_fini
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" |
+if $ac_cs_awk_getline; then
+  $AWK -f "$ac_tmp/subs.awk"
+else
+  $AWK -f "$ac_tmp/subs.awk" | $SHELL
+fi \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named 'Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running 'make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "$am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "po-directories":C)
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          gt_tab=`printf '\t'`
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            # Hide the ALL_LINGUAS assignment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            # Hide the ALL_LINGUAS assignment from automake < 1.5.
+            eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
+# We only generate the build.sh if we have a build.sh.in; we won't have
+# one before we've created a distribution.
+if test -f "$srcdir/build.sh.in"; then :
+   ./config.status --file build.sh
+  chmod +x build.sh
+
+fi
+
diff --git a/doc/.gitignore b/doc/.gitignore
index ca68d2d..ddd032e 100644
--- a/doc/.gitignore
+++ b/doc/.gitignore
@@ -1,10 +1,5 @@
 manual/
 gendocs_template
-fdl.texi
-make-stds.texi
-stamp-vti
-version.texi
-make.info*
 make*.html
 make.aux
 make.cp
diff --git a/doc/Makefile.in b/doc/Makefile.in
new file mode 100644
index 0000000..c5f05e5
--- /dev/null
+++ b/doc/Makefile.in
@@ -0,0 +1,807 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*-Makefile-*-, or close enough
+# Copyright (C) 2000-2016 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 \
+	$(top_srcdir)/config/longlong.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/version.texi \
+	$(srcdir)/stamp-vti $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo "  DVIPS   " $@;
+am__v_DVIPS_1 = 
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
+am__v_MAKEINFO_1 = 
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
+am__v_INFOHTML_1 = 
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
+am__v_TEXI2DVI_1 = 
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
+am__v_TEXI2PDF_1 = 
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 = 
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 = 
+INFO_DEPS = $(srcdir)/make.info
+TEXINFO_TEX = $(top_srcdir)/config/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/config
+DVIS = make.dvi
+PDFS = make.pdf
+PSS = make.ps
+HTMLS = make.html
+TEXINFOS = make.texi
+TEXI2DVI = texi2dvi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__installdirs = "$(DESTDIR)$(infodir)"
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(make_TEXINFOS) $(srcdir)/Makefile.in \
+	$(top_srcdir)/config/mdate-sh $(top_srcdir)/config/texinfo.tex
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+TEXI2HTML = texi2html
+TEXI2HTML_FLAGS = -split_chapter
+info_TEXINFOS = make.texi
+make_TEXINFOS = fdl.texi make-stds.texi
+CLEANFILES = make*.html
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign doc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+.texi.info:
+	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
+	rm -rf $$backupdir && mkdir $$backupdir && \
+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+	  done; \
+	else :; fi && \
+	cd "$$am__cwd"; \
+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $@ $<; \
+	then \
+	  rc=0; \
+	  $(am__cd) $(srcdir); \
+	else \
+	  rc=$$?; \
+	  $(am__cd) $(srcdir) && \
+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+	fi; \
+	rm -rf $$backupdir; exit $$rc
+
+.texi.dvi:
+	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+	$<
+
+.texi.pdf:
+	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+	$<
+
+.texi.html:
+	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $(@:.html=.htp) $<; \
+	then \
+	  rm -rf $@ && mv $(@:.html=.htp) $@; \
+	else \
+	  rm -rf $(@:.html=.htp); exit 1; \
+	fi
+$(srcdir)/make.info: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.dvi: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.pdf: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+make.html: make.texi $(srcdir)/version.texi $(make_TEXINFOS)
+$(srcdir)/version.texi:  $(srcdir)/stamp-vti
+$(srcdir)/stamp-vti: make.texi $(top_srcdir)/configure
+	@(dir=.; test -f ./make.texi || dir=$(srcdir); \
+	set `$(SHELL) $(top_srcdir)/config/mdate-sh $$dir/make.texi`; \
+	echo "@set UPDATED $$1 $$2 $$3"; \
+	echo "@set UPDATED-MONTH $$2 $$3"; \
+	echo "@set EDITION $(VERSION)"; \
+	echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
+	(cmp -s vti.tmp$$$$ $(srcdir)/version.texi \
+	  || (echo "Updating $(srcdir)/version.texi" && \
+	      cp vti.tmp$$$$ $(srcdir)/version.texi.tmp$$$$ && \
+	      mv $(srcdir)/version.texi.tmp$$$$ $(srcdir)/version.texi)) && \
+	rm -f vti.tmp$$$$ $(srcdir)/version.texi.$$$$
+	@cp $(srcdir)/version.texi $@
+
+mostlyclean-vti:
+	-rm -f vti.tmp* $(srcdir)/version.texi.tmp*
+
+maintainer-clean-vti:
+	-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
+.dvi.ps:
+	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) $(AM_V_texinfo) -o $@ $<
+
+uninstall-dvi-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+	done
+
+uninstall-html-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+	done
+
+uninstall-info-am:
+	@$(PRE_UNINSTALL)
+	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+	  done; \
+	else :; fi
+	@$(NORMAL_UNINSTALL)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+	   else :; fi); \
+	done
+
+uninstall-pdf-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+	done
+
+uninstall-ps-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
+	done
+
+dist-info: $(INFO_DEPS)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for base in $$list; do \
+	  case $$base in \
+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
+	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+	    if test -f $$file; then \
+	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	      test -f "$(distdir)/$$relfile" || \
+		cp -p $$file "$(distdir)/$$relfile"; \
+	    else :; fi; \
+	  done; \
+	done
+
+mostlyclean-aminfo:
+	-rm -rf make.t2d make.t2p
+
+clean-aminfo:
+	-test -z "make.dvi make.pdf make.ps make.html" \
+	|| rm -rf make.dvi make.pdf make.ps make.html
+
+maintainer-clean-aminfo:
+	@list='$(INFO_DEPS)'; for i in $$list; do \
+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+	done
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-info
+check-am: all-am
+check: check-am
+all-am: Makefile $(INFO_DEPS)
+installdirs:
+	for dir in "$(DESTDIR)$(infodir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-aminfo clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am: $(DVIS)
+
+html: html-am
+
+html-am: $(HTMLS)
+
+info: info-am
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am
+
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+	@$(NORMAL_INSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+	done
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  d2=$$d$$p; \
+	  if test -d "$$d2"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d2"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+	fi; \
+	for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+	    if test -f $$ifile; then \
+	      echo "$$ifile"; \
+	    else : ; fi; \
+	  done; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+	@$(POST_INSTALL)
+	@if $(am__can_run_installinfo); then \
+	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+	  done; \
+	else : ; fi
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+	@$(NORMAL_INSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-pdf-am uninstall-ps-am
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
+	cscopelist-am ctags-am dist-info distclean distclean-generic \
+	distdir dvi dvi-am html html-am info info-am install \
+	install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti mostlyclean \
+	mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
+	pdf-am ps ps-am tags-am uninstall uninstall-am \
+	uninstall-dvi-am uninstall-html-am uninstall-info-am \
+	uninstall-pdf-am uninstall-ps-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/doc/fdl.texi b/doc/fdl.texi
new file mode 100644
index 0000000..9c3bbe5
--- /dev/null
+++ b/doc/fdl.texi
@@ -0,0 +1,505 @@
+@c The GNU Free Documentation License.
+@center Version 1.3, 3 November 2008
+
+@c This file is intended to be included within another document,
+@c hence no sectioning command or @node.
+
+@display
+Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+@uref{http://fsf.org/}
+
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+@end display
+
+@enumerate 0
+@item
+PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+functional and useful document @dfn{free} in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+
+This License is a kind of ``copyleft'', which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+
+@item
+APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License.  Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein.  The ``Document'', below,
+refers to any such manual or work.  Any member of the public is a
+licensee, and is addressed as ``you''.  You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+
+A ``Modified Version'' of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A ``Secondary Section'' is a named appendix or a front-matter section
+of the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject.  (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The ``Invariant Sections'' are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.  If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant.  The Document may contain zero
+Invariant Sections.  If the Document does not identify any Invariant
+Sections then there are none.
+
+The ``Cover Texts'' are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.  A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+
+A ``Transparent'' copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text.  A copy that is not ``Transparent'' is called ``Opaque''.
+
+Examples of suitable formats for Transparent copies include plain
+ASCII without markup, Texinfo input format, La@TeX{} input
+format, SGML or XML using a publicly available
+DTD, and standard-conforming simple HTML,
+PostScript or PDF designed for human modification.  Examples
+of transparent image formats include PNG, XCF and
+JPG@.  Opaque formats include proprietary formats that can be
+read and edited only by proprietary word processors, SGML or
+XML for which the DTD and/or processing tools are
+not generally available, and the machine-generated HTML,
+PostScript or PDF produced by some word processors for
+output purposes only.
+
+The ``Title Page'' means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, ``Title Page'' means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+The ``publisher'' means any person or entity that distributes copies
+of the Document to the public.
+
+A section ``Entitled XYZ'' means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language.  (Here XYZ stands for a
+specific section name mentioned below, such as ``Acknowledgements'',
+``Dedications'', ``Endorsements'', or ``History''.)  To ``Preserve the Title''
+of such a section when you modify the Document means that it remains a
+section ``Entitled XYZ'' according to this definition.
+
+The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document.  These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+
+@item
+VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+@item
+COPYING IN QUANTITY
+
+If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document's license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+@item
+MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+
+@enumerate A
+@item
+Use in the Title Page (and on the covers, if any) a title distinct
+from that of the Document, and from those of previous versions
+(which should, if there were any, be listed in the History section
+of the Document).  You may use the same title as a previous version
+if the original publisher of that version gives permission.
+
+@item
+List on the Title Page, as authors, one or more persons or entities
+responsible for authorship of the modifications in the Modified
+Version, together with at least five of the principal authors of the
+Document (all of its principal authors, if it has fewer than five),
+unless they release you from this requirement.
+
+@item
+State on the Title page the name of the publisher of the
+Modified Version, as the publisher.
+
+@item
+Preserve all the copyright notices of the Document.
+
+@item
+Add an appropriate copyright notice for your modifications
+adjacent to the other copyright notices.
+
+@item
+Include, immediately after the copyright notices, a license notice
+giving the public permission to use the Modified Version under the
+terms of this License, in the form shown in the Addendum below.
+
+@item
+Preserve in that license notice the full lists of Invariant Sections
+and required Cover Texts given in the Document's license notice.
+
+@item
+Include an unaltered copy of this License.
+
+@item
+Preserve the section Entitled ``History'', Preserve its Title, and add
+to it an item stating at least the title, year, new authors, and
+publisher of the Modified Version as given on the Title Page.  If
+there is no section Entitled ``History'' in the Document, create one
+stating the title, year, authors, and publisher of the Document as
+given on its Title Page, then add an item describing the Modified
+Version as stated in the previous sentence.
+
+@item
+Preserve the network location, if any, given in the Document for
+public access to a Transparent copy of the Document, and likewise
+the network locations given in the Document for previous versions
+it was based on.  These may be placed in the ``History'' section.
+You may omit a network location for a work that was published at
+least four years before the Document itself, or if the original
+publisher of the version it refers to gives permission.
+
+@item
+For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
+the Title of the section, and preserve in the section all the
+substance and tone of each of the contributor acknowledgements and/or
+dedications given therein.
+
+@item
+Preserve all the Invariant Sections of the Document,
+unaltered in their text and in their titles.  Section numbers
+or the equivalent are not considered part of the section titles.
+
+@item
+Delete any section Entitled ``Endorsements''.  Such a section
+may not be included in the Modified Version.
+
+@item
+Do not retitle any existing section to be Entitled ``Endorsements'' or
+to conflict in title with any Invariant Section.
+
+@item
+Preserve any Warranty Disclaimers.
+@end enumerate
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section Entitled ``Endorsements'', provided it contains
+nothing but endorsements of your Modified Version by various
+parties---for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+@item
+COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections Entitled ``History''
+in the various original documents, forming one section Entitled
+``History''; likewise combine any sections Entitled ``Acknowledgements'',
+and any sections Entitled ``Dedications''.  You must delete all
+sections Entitled ``Endorsements.''
+
+@item
+COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+@item
+AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an ``aggregate'' if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation's users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document's Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+
+@item
+TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers.  In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+
+If a section in the Document is Entitled ``Acknowledgements'',
+``Dedications'', or ``History'', the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+
+@item
+TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense, or distribute it is void, and
+will automatically terminate your rights under this License.
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, receipt of a copy of some or all of the same material does
+not give you any rights to use it.
+
+@item
+FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time.  Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.  See
+@uref{http://www.gnu.org/copyleft/}.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License ``or any later version'' applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.  If the Document
+specifies that a proxy can decide which future versions of this
+License can be used, that proxy's public statement of acceptance of a
+version permanently authorizes you to choose that version for the
+Document.
+
+@item
+RELICENSING
+
+``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any
+World Wide Web server that publishes copyrightable works and also
+provides prominent facilities for anybody to edit those works.  A
+public wiki that anybody can edit is an example of such a server.  A
+``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the
+site means any set of copyrightable works thus published on the MMC
+site.
+
+``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0
+license published by Creative Commons Corporation, a not-for-profit
+corporation with a principal place of business in San Francisco,
+California, as well as future copyleft versions of that license
+published by that same organization.
+
+``Incorporate'' means to publish or republish a Document, in whole or
+in part, as part of another Document.
+
+An MMC is ``eligible for relicensing'' if it is licensed under this
+License, and if all works that were first published under this License
+somewhere other than this MMC, and subsequently incorporated in whole
+or in part into the MMC, (1) had no cover texts or invariant sections,
+and (2) were thus incorporated prior to November 1, 2008.
+
+The operator of an MMC Site may republish an MMC contained in the site
+under CC-BY-SA on the same site at any time before August 1, 2009,
+provided the MMC is eligible for relicensing.
+
+@end enumerate
+
+@page
+@heading ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+@group
+  Copyright (C)  @var{year}  @var{your name}.
+  Permission is granted to copy, distribute and/or modify this document
+  under the terms of the GNU Free Documentation License, Version 1.3
+  or any later version published by the Free Software Foundation;
+  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+  Texts.  A copy of the license is included in the section entitled ``GNU
+  Free Documentation License''.
+@end group
+@end smallexample
+
+If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the ``with@dots{}Texts.''@: line with this:
+
+@smallexample
+@group
+    with the Invariant Sections being @var{list their titles}, with
+    the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
+    being @var{list}.
+@end group
+@end smallexample
+
+If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
+@c Local Variables:
+@c ispell-local-pdict: "ispell-dict"
+@c End:
diff --git a/doc/make-stds.texi b/doc/make-stds.texi
new file mode 100644
index 0000000..d37b244
--- /dev/null
+++ b/doc/make-stds.texi
@@ -0,0 +1,1173 @@
+@comment This file is included by both standards.texi and make.texinfo.
+@comment It was broken out of standards.texi on 1/6/93 by roland.
+
+@node Makefile Conventions
+@chapter Makefile Conventions
+@cindex makefile, conventions for
+@cindex conventions for makefiles
+@cindex standards for makefiles
+
+@c Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001,
+@c 2004, 2005, 2006, 2007, 2008, 2010, 2013, 2014, 2015
+@c Free Software Foundation, Inc.
+@c
+@c Permission is granted to copy, distribute and/or modify this document
+@c under the terms of the GNU Free Documentation License, Version 1.3
+@c or any later version published by the Free Software Foundation;
+@c with no Invariant Sections, with no
+@c Front-Cover Texts, and with no Back-Cover Texts.
+@c A copy of the license is included in the section entitled ``GNU
+@c Free Documentation License''.
+
+This
+@ifinfo
+node
+@end ifinfo
+@iftex
+@ifset CODESTD
+section
+@end ifset
+@ifclear CODESTD
+chapter
+@end ifclear
+@end iftex
+describes conventions for writing the Makefiles for GNU programs.
+Using Automake will help you write a Makefile that follows these
+conventions.  For more information on portable Makefiles, see
+@sc{posix} and @ref{Portable Make, Portable Make Programming,, autoconf,
+Autoconf}.
+
+
+@menu
+* Makefile Basics::             General conventions for Makefiles.
+* Utilities in Makefiles::      Utilities to be used in Makefiles.
+* Command Variables::           Variables for specifying commands.
+* DESTDIR::                     Supporting staged installs.
+* Directory Variables::         Variables for installation directories.
+* Standard Targets::            Standard targets for users.
+* Install Command Categories::  Three categories of commands in the @samp{install}
+                                  rule: normal, pre-install and post-install.
+@end menu
+
+@node Makefile Basics
+@section General Conventions for Makefiles
+
+Every Makefile should contain this line:
+
+@example
+SHELL = /bin/sh
+@end example
+
+@noindent
+to avoid trouble on systems where the @code{SHELL} variable might be
+inherited from the environment.  (This is never a problem with GNU
+@code{make}.)
+
+Different @code{make} programs have incompatible suffix lists and
+implicit rules, and this sometimes creates confusion or misbehavior.  So
+it is a good idea to set the suffix list explicitly using only the
+suffixes you need in the particular Makefile, like this:
+
+@example
+.SUFFIXES:
+.SUFFIXES: .c .o
+@end example
+
+@noindent
+The first line clears out the suffix list, the second introduces all
+suffixes which may be subject to implicit rules in this Makefile.
+
+Don't assume that @file{.} is in the path for command execution.  When
+you need to run programs that are a part of your package during the
+make, please make sure that it uses @file{./} if the program is built as
+part of the make or @file{$(srcdir)/} if the file is an unchanging part
+of the source code.  Without one of these prefixes, the current search
+path is used.
+
+The distinction between @file{./} (the @dfn{build directory}) and
+@file{$(srcdir)/} (the @dfn{source directory}) is important because
+users can build in a separate directory using the @samp{--srcdir} option
+to @file{configure}.  A rule of the form:
+
+@smallexample
+foo.1 : foo.man sedscript
+        sed -f sedscript foo.man > foo.1
+@end smallexample
+
+@noindent
+will fail when the build directory is not the source directory, because
+@file{foo.man} and @file{sedscript} are in the source directory.
+
+When using GNU @code{make}, relying on @samp{VPATH} to find the source
+file will work in the case where there is a single dependency file,
+since the @code{make} automatic variable @samp{$<} will represent the
+source file wherever it is.  (Many versions of @code{make} set @samp{$<}
+only in implicit rules.)  A Makefile target like
+
+@smallexample
+foo.o : bar.c
+        $(CC) -I. -I$(srcdir) $(CFLAGS) -c bar.c -o foo.o
+@end smallexample
+
+@noindent
+should instead be written as
+
+@smallexample
+foo.o : bar.c
+        $(CC) -I. -I$(srcdir) $(CFLAGS) -c $< -o $@@
+@end smallexample
+
+@noindent
+in order to allow @samp{VPATH} to work correctly.  When the target has
+multiple dependencies, using an explicit @samp{$(srcdir)} is the easiest
+way to make the rule work well.  For example, the target above for
+@file{foo.1} is best written as:
+
+@smallexample
+foo.1 : foo.man sedscript
+        sed -f $(srcdir)/sedscript $(srcdir)/foo.man > $@@
+@end smallexample
+
+GNU distributions usually contain some files which are not source
+files---for example, Info files, and the output from Autoconf, Automake,
+Bison or Flex.  Since these files normally appear in the source
+directory, they should always appear in the source directory, not in the
+build directory.  So Makefile rules to update them should put the
+updated files in the source directory.
+
+However, if a file does not appear in the distribution, then the
+Makefile should not put it in the source directory, because building a
+program in ordinary circumstances should not modify the source directory
+in any way.
+
+Try to make the build and installation targets, at least (and all their
+subtargets) work correctly with a parallel @code{make}.
+
+@node Utilities in Makefiles
+@section Utilities in Makefiles
+
+Write the Makefile commands (and any shell scripts, such as
+@code{configure}) to run under @code{sh} (both the traditional Bourne
+shell and the @sc{posix} shell), not @code{csh}.  Don't use any
+special features of @code{ksh} or @code{bash}, or @sc{posix} features
+not widely supported in traditional Bourne @code{sh}.
+
+The @code{configure} script and the Makefile rules for building and
+installation should not use any utilities directly except these:
+
+@c dd find
+@c gunzip gzip md5sum
+@c mkfifo mknod tee uname
+
+@example
+awk cat cmp cp diff echo egrep expr false grep install-info ln ls
+mkdir mv printf pwd rm rmdir sed sleep sort tar test touch tr true
+@end example
+
+Compression programs such as @code{gzip} can be used in the
+@code{dist} rule.
+
+Generally, stick to the widely-supported (usually
+@sc{posix}-specified) options and features of these programs.  For
+example, don't use @samp{mkdir -p}, convenient as it may be, because a
+few systems don't support it at all and with others, it is not safe
+for parallel execution.  For a list of known incompatibilities, see
+@ref{Portable Shell, Portable Shell Programming,, autoconf, Autoconf}.
+
+
+It is a good idea to avoid creating symbolic links in makefiles, since a
+few file systems don't support them.
+
+The Makefile rules for building and installation can also use compilers
+and related programs, but should do so via @code{make} variables so that the
+user can substitute alternatives.  Here are some of the programs we
+mean:
+
+@example
+ar bison cc flex install ld ldconfig lex
+make makeinfo ranlib texi2dvi yacc
+@end example
+
+Use the following @code{make} variables to run those programs:
+
+@example
+$(AR) $(BISON) $(CC) $(FLEX) $(INSTALL) $(LD) $(LDCONFIG) $(LEX)
+$(MAKE) $(MAKEINFO) $(RANLIB) $(TEXI2DVI) $(YACC)
+@end example
+
+When you use @code{ranlib} or @code{ldconfig}, you should make sure
+nothing bad happens if the system does not have the program in question.
+Arrange to ignore an error from that command, and print a message before
+the command to tell the user that failure of this command does not mean
+a problem.  (The Autoconf @samp{AC_PROG_RANLIB} macro can help with
+this.)
+
+If you use symbolic links, you should implement a fallback for systems
+that don't have symbolic links.
+
+Additional utilities that can be used via Make variables are:
+
+@example
+chgrp chmod chown mknod
+@end example
+
+It is ok to use other utilities in Makefile portions (or scripts)
+intended only for particular systems where you know those utilities
+exist.
+
+@node Command Variables
+@section Variables for Specifying Commands
+
+Makefiles should provide variables for overriding certain commands, options,
+and so on.
+
+In particular, you should run most utility programs via variables.
+Thus, if you use Bison, have a variable named @code{BISON} whose default
+value is set with @samp{BISON = bison}, and refer to it with
+@code{$(BISON)} whenever you need to use Bison.
+
+File management utilities such as @code{ln}, @code{rm}, @code{mv}, and
+so on, need not be referred to through variables in this way, since users
+don't need to replace them with other programs.
+
+Each program-name variable should come with an options variable that is
+used to supply options to the program.  Append @samp{FLAGS} to the
+program-name variable name to get the options variable name---for
+example, @code{BISONFLAGS}.  (The names @code{CFLAGS} for the C
+compiler, @code{YFLAGS} for yacc, and @code{LFLAGS} for lex, are
+exceptions to this rule, but we keep them because they are standard.)
+Use @code{CPPFLAGS} in any compilation command that runs the
+preprocessor, and use @code{LDFLAGS} in any compilation command that
+does linking as well as in any direct use of @code{ld}.
+
+If there are C compiler options that @emph{must} be used for proper
+compilation of certain files, do not include them in @code{CFLAGS}.
+Users expect to be able to specify @code{CFLAGS} freely themselves.
+Instead, arrange to pass the necessary options to the C compiler
+independently of @code{CFLAGS}, by writing them explicitly in the
+compilation commands or by defining an implicit rule, like this:
+
+@smallexample
+CFLAGS = -g
+ALL_CFLAGS = -I. $(CFLAGS)
+.c.o:
+        $(CC) -c $(CPPFLAGS) $(ALL_CFLAGS) $<
+@end smallexample
+
+Do include the @samp{-g} option in @code{CFLAGS}, because that is not
+@emph{required} for proper compilation.  You can consider it a default
+that is only recommended.  If the package is set up so that it is
+compiled with GCC by default, then you might as well include @samp{-O}
+in the default value of @code{CFLAGS} as well.
+
+Put @code{CFLAGS} last in the compilation command, after other variables
+containing compiler options, so the user can use @code{CFLAGS} to
+override the others.
+
+@code{CFLAGS} should be used in every invocation of the C compiler,
+both those which do compilation and those which do linking.
+
+Every Makefile should define the variable @code{INSTALL}, which is the
+basic command for installing a file into the system.
+
+Every Makefile should also define the variables @code{INSTALL_PROGRAM}
+and @code{INSTALL_DATA}.  (The default for @code{INSTALL_PROGRAM} should
+be @code{$(INSTALL)}; the default for @code{INSTALL_DATA} should be
+@code{$@{INSTALL@} -m 644}.)  Then it should use those variables as the
+commands for actual installation, for executables and non-executables
+respectively.  Minimal use of these variables is as follows:
+
+@example
+$(INSTALL_PROGRAM) foo $(bindir)/foo
+$(INSTALL_DATA) libfoo.a $(libdir)/libfoo.a
+@end example
+
+However, it is preferable to support a @code{DESTDIR} prefix on the
+target files, as explained in the next section.
+
+It is acceptable, but not required, to install multiple files in one
+command, with the final argument being a directory, as in:
+
+@example
+$(INSTALL_PROGRAM) foo bar baz $(bindir)
+@end example
+
+
+@node DESTDIR
+@section @code{DESTDIR}: Support for Staged Installs
+
+@vindex DESTDIR
+@cindex staged installs
+@cindex installations, staged
+
+@code{DESTDIR} is a variable prepended to each installed target file,
+like this:
+
+@example
+$(INSTALL_PROGRAM) foo $(DESTDIR)$(bindir)/foo
+$(INSTALL_DATA) libfoo.a $(DESTDIR)$(libdir)/libfoo.a
+@end example
+
+The @code{DESTDIR} variable is specified by the user on the @code{make}
+command line as an absolute file name.  For example:
+
+@example
+make DESTDIR=/tmp/stage install
+@end example
+
+@noindent
+@code{DESTDIR} should be supported only in the @code{install*} and
+@code{uninstall*} targets, as those are the only targets where it is
+useful.
+
+If your installation step would normally install
+@file{/usr/local/bin/foo} and @file{/usr/@/local/@/lib/@/libfoo.a}, then an
+installation invoked as in the example above would install
+@file{/tmp/stage/usr/local/bin/foo} and
+@file{/tmp/stage/usr/local/lib/libfoo.a} instead.
+
+Prepending the variable @code{DESTDIR} to each target in this way
+provides for @dfn{staged installs}, where the installed files are not
+placed directly into their expected location but are instead copied
+into a temporary location (@code{DESTDIR}).  However, installed files
+maintain their relative directory structure and any embedded file names
+will not be modified.
+
+You should not set the value of @code{DESTDIR} in your @file{Makefile}
+at all; then the files are installed into their expected locations by
+default.  Also, specifying @code{DESTDIR} should not change the
+operation of the software in any way, so its value should not be
+included in any file contents.
+
+@code{DESTDIR} support is commonly used in package creation.  It is
+also helpful to users who want to understand what a given package will
+install where, and to allow users who don't normally have permissions
+to install into protected areas to build and install before gaining
+those permissions.  Finally, it can be useful with tools such as
+@code{stow}, where code is installed in one place but made to appear
+to be installed somewhere else using symbolic links or special mount
+operations.  So, we strongly recommend GNU packages support
+@code{DESTDIR}, though it is not an absolute requirement.
+
+
+@node Directory Variables
+@section Variables for Installation Directories
+
+Installation directories should always be named by variables, so it is
+easy to install in a nonstandard place.  The standard names for these
+variables and the values they should have in GNU packages are
+described below.  They are based on a standard file system layout;
+variants of it are used in GNU/Linux and other modern operating
+systems.
+
+Installers are expected to override these values when calling
+@command{make} (e.g., @kbd{make prefix=/usr install}) or
+@command{configure} (e.g., @kbd{configure --prefix=/usr}).  GNU
+packages should not try to guess which value should be appropriate for
+these variables on the system they are being installed onto: use the
+default settings specified here so that all GNU packages behave
+identically, allowing the installer to achieve any desired layout.
+
+@cindex directories, creating installation
+@cindex installation directories, creating
+All installation directories, and their parent directories, should be
+created (if necessary) before they are installed into.
+
+These first two variables set the root for the installation.  All the
+other installation directories should be subdirectories of one of
+these two, and nothing should be directly installed into these two
+directories.
+
+@table @code
+@item prefix
+@vindex prefix
+A prefix used in constructing the default values of the variables listed
+below.  The default value of @code{prefix} should be @file{/usr/local}.
+When building the complete GNU system, the prefix will be empty and
+@file{/usr} will be a symbolic link to @file{/}.
+(If you are using Autoconf, write it as @samp{@@prefix@@}.)
+
+Running @samp{make install} with a different value of @code{prefix} from
+the one used to build the program should @emph{not} recompile the
+program.
+
+@item exec_prefix
+@vindex exec_prefix
+A prefix used in constructing the default values of some of the
+variables listed below.  The default value of @code{exec_prefix} should
+be @code{$(prefix)}.
+(If you are using Autoconf, write it as @samp{@@exec_prefix@@}.)
+
+Generally, @code{$(exec_prefix)} is used for directories that contain
+machine-specific files (such as executables and subroutine libraries),
+while @code{$(prefix)} is used directly for other directories.
+
+Running @samp{make install} with a different value of @code{exec_prefix}
+from the one used to build the program should @emph{not} recompile the
+program.
+@end table
+
+Executable programs are installed in one of the following directories.
+
+@table @code
+@item bindir
+@vindex bindir
+The directory for installing executable programs that users can run.
+This should normally be @file{/usr/local/bin}, but write it as
+@file{$(exec_prefix)/bin}.
+(If you are using Autoconf, write it as @samp{@@bindir@@}.)
+
+@item sbindir
+@vindex sbindir
+The directory for installing executable programs that can be run from
+the shell, but are only generally useful to system administrators.  This
+should normally be @file{/usr/local/sbin}, but write it as
+@file{$(exec_prefix)/sbin}.
+(If you are using Autoconf, write it as @samp{@@sbindir@@}.)
+
+@item libexecdir
+@vindex libexecdir
+@comment This paragraph adjusted to avoid overfull hbox --roland 5jul94
+The directory for installing executable programs to be run by other
+programs rather than by users.  This directory should normally be
+@file{/usr/local/libexec}, but write it as @file{$(exec_prefix)/libexec}.
+(If you are using Autoconf, write it as @samp{@@libexecdir@@}.)
+
+The definition of @samp{libexecdir} is the same for all packages, so
+you should install your data in a subdirectory thereof.  Most packages
+install their data under @file{$(libexecdir)/@var{package-name}/},
+possibly within additional subdirectories thereof, such as
+@file{$(libexecdir)/@var{package-name}/@var{machine}/@var{version}}.
+@end table
+
+Data files used by the program during its execution are divided into
+categories in two ways.
+
+@itemize @bullet
+@item
+Some files are normally modified by programs; others are never normally
+modified (though users may edit some of these).
+
+@item
+Some files are architecture-independent and can be shared by all
+machines at a site; some are architecture-dependent and can be shared
+only by machines of the same kind and operating system; others may never
+be shared between two machines.
+@end itemize
+
+This makes for six different possibilities.  However, we want to
+discourage the use of architecture-dependent files, aside from object
+files and libraries.  It is much cleaner to make other data files
+architecture-independent, and it is generally not hard.
+
+Here are the variables Makefiles should use to specify directories
+to put these various kinds of files in:
+
+@table @samp
+@item datarootdir
+The root of the directory tree for read-only architecture-independent
+data files.  This should normally be @file{/usr/local/share}, but
+write it as @file{$(prefix)/share}.  (If you are using Autoconf, write
+it as @samp{@@datarootdir@@}.)  @samp{datadir}'s default value is
+based on this variable; so are @samp{infodir}, @samp{mandir}, and
+others.
+
+@item datadir
+The directory for installing idiosyncratic read-only
+architecture-independent data files for this program.  This is usually
+the same place as @samp{datarootdir}, but we use the two separate
+variables so that you can move these program-specific files without
+altering the location for Info files, man pages, etc.
+
+@c raggedright  (not until next Texinfo release)
+This should normally be @file{/usr/local/share}, but write it as
+@file{$(datarootdir)}.  (If you are using Autoconf, write it as
+@samp{@@datadir@@}.)
+@c end raggedright
+
+The definition of @samp{datadir} is the same for all packages, so you
+should install your data in a subdirectory thereof.  Most packages
+install their data under @file{$(datadir)/@var{package-name}/}.
+
+@item sysconfdir
+The directory for installing read-only data files that pertain to a
+single machine--that is to say, files for configuring a host.  Mailer
+and network configuration files, @file{/etc/passwd}, and so forth belong
+here.  All the files in this directory should be ordinary ASCII text
+files.  This directory should normally be @file{/usr/local/etc}, but
+write it as @file{$(prefix)/etc}.
+(If you are using Autoconf, write it as @samp{@@sysconfdir@@}.)
+
+Do not install executables here in this directory (they probably belong
+in @file{$(libexecdir)} or @file{$(sbindir)}).  Also do not install
+files that are modified in the normal course of their use (programs
+whose purpose is to change the configuration of the system excluded).
+Those probably belong in @file{$(localstatedir)}.
+
+@item sharedstatedir
+The directory for installing architecture-independent data files which
+the programs modify while they run.  This should normally be
+@file{/usr/local/com}, but write it as @file{$(prefix)/com}.
+(If you are using Autoconf, write it as @samp{@@sharedstatedir@@}.)
+
+@item localstatedir
+The directory for installing data files which the programs modify while
+they run, and that pertain to one specific machine.  Users should never
+need to modify files in this directory to configure the package's
+operation; put such configuration information in separate files that go
+in @file{$(datadir)} or @file{$(sysconfdir)}.  @file{$(localstatedir)}
+should normally be @file{/usr/local/var}, but write it as
+@file{$(prefix)/var}.
+(If you are using Autoconf, write it as @samp{@@localstatedir@@}.)
+
+@item runstatedir
+The directory for installing data files which the programs modify
+while they run, that pertain to one specific machine, and which need
+not persist longer than the execution of the program---which is
+generally long-lived, for example, until the next reboot.  PID files
+for system daemons are a typical use.  In addition, this directory
+should not be cleaned except perhaps at reboot, while the general
+@file{/tmp} (@code{TMPDIR}) may be cleaned arbitrarily.  This should
+normally be @file{/var/run}, but write it as
+@file{$(localstatedir)/run}.  Having it as a separate variable allows
+the use of @file{/run} if desired, for example.  (If you are using
+Autoconf 2.70 or later, write it as @samp{@@runstatedir@@}.)
+@end table
+
+These variables specify the directory for installing certain specific
+types of files, if your program has them.  Every GNU package should
+have Info files, so every program needs @samp{infodir}, but not all
+need @samp{libdir} or @samp{lispdir}.
+
+@table @samp
+@item includedir
+The directory for installing header files to be included by user
+programs with the C @samp{#include} preprocessor directive.  This
+should normally be @file{/usr/local/include}, but write it as
+@file{$(prefix)/include}.
+(If you are using Autoconf, write it as @samp{@@includedir@@}.)
+
+Most compilers other than GCC do not look for header files in directory
+@file{/usr/local/include}.  So installing the header files this way is
+only useful with GCC.  Sometimes this is not a problem because some
+libraries are only really intended to work with GCC.  But some libraries
+are intended to work with other compilers.  They should install their
+header files in two places, one specified by @code{includedir} and one
+specified by @code{oldincludedir}.
+
+@item oldincludedir
+The directory for installing @samp{#include} header files for use with
+compilers other than GCC.  This should normally be @file{/usr/include}.
+(If you are using Autoconf, you can write it as @samp{@@oldincludedir@@}.)
+
+The Makefile commands should check whether the value of
+@code{oldincludedir} is empty.  If it is, they should not try to use
+it; they should cancel the second installation of the header files.
+
+A package should not replace an existing header in this directory unless
+the header came from the same package.  Thus, if your Foo package
+provides a header file @file{foo.h}, then it should install the header
+file in the @code{oldincludedir} directory if either (1) there is no
+@file{foo.h} there or (2) the @file{foo.h} that exists came from the Foo
+package.
+
+To tell whether @file{foo.h} came from the Foo package, put a magic
+string in the file---part of a comment---and @code{grep} for that string.
+
+@item docdir
+The directory for installing documentation files (other than Info) for
+this package.  By default, it should be
+@file{/usr/local/share/doc/@var{yourpkg}}, but it should be written as
+@file{$(datarootdir)/doc/@var{yourpkg}}.  (If you are using Autoconf,
+write it as @samp{@@docdir@@}.)  The @var{yourpkg} subdirectory, which
+may include a version number, prevents collisions among files with
+common names, such as @file{README}.
+
+@item infodir
+The directory for installing the Info files for this package.  By
+default, it should be @file{/usr/local/share/info}, but it should be
+written as @file{$(datarootdir)/info}.  (If you are using Autoconf,
+write it as @samp{@@infodir@@}.)  @code{infodir} is separate from
+@code{docdir} for compatibility with existing practice.
+
+@item htmldir
+@itemx dvidir
+@itemx pdfdir
+@itemx psdir
+Directories for installing documentation files in the particular
+format.  They should all be set to @code{$(docdir)} by default.  (If
+you are using Autoconf, write them as @samp{@@htmldir@@},
+@samp{@@dvidir@@}, etc.)  Packages which supply several translations
+of their documentation should install them in
+@samp{$(htmldir)/}@var{ll}, @samp{$(pdfdir)/}@var{ll}, etc. where
+@var{ll} is a locale abbreviation such as @samp{en} or @samp{pt_BR}.
+
+@item libdir
+The directory for object files and libraries of object code.  Do not
+install executables here, they probably ought to go in @file{$(libexecdir)}
+instead.  The value of @code{libdir} should normally be
+@file{/usr/local/lib}, but write it as @file{$(exec_prefix)/lib}.
+(If you are using Autoconf, write it as @samp{@@libdir@@}.)
+
+@item lispdir
+The directory for installing any Emacs Lisp files in this package.  By
+default, it should be @file{/usr/local/share/emacs/site-lisp}, but it
+should be written as @file{$(datarootdir)/emacs/site-lisp}.
+
+If you are using Autoconf, write the default as @samp{@@lispdir@@}.
+In order to make @samp{@@lispdir@@} work, you need the following lines
+in your @file{configure.ac} file:
+
+@example
+lispdir='$@{datarootdir@}/emacs/site-lisp'
+AC_SUBST(lispdir)
+@end example
+
+@item localedir
+The directory for installing locale-specific message catalogs for this
+package.  By default, it should be @file{/usr/local/share/locale}, but
+it should be written as @file{$(datarootdir)/locale}.  (If you are
+using Autoconf, write it as @samp{@@localedir@@}.)  This directory
+usually has a subdirectory per locale.
+@end table
+
+Unix-style man pages are installed in one of the following:
+
+@table @samp
+@item mandir
+The top-level directory for installing the man pages (if any) for this
+package.  It will normally be @file{/usr/local/share/man}, but you
+should write it as @file{$(datarootdir)/man}.  (If you are using
+Autoconf, write it as @samp{@@mandir@@}.)
+
+@item man1dir
+The directory for installing section 1 man pages.  Write it as
+@file{$(mandir)/man1}.
+@item man2dir
+The directory for installing section 2 man pages.  Write it as
+@file{$(mandir)/man2}
+@item @dots{}
+
+@strong{Don't make the primary documentation for any GNU software be a
+man page.  Write a manual in Texinfo instead.  Man pages are just for
+the sake of people running GNU software on Unix, which is a secondary
+application only.}
+
+@item manext
+The file name extension for the installed man page.  This should contain
+a period followed by the appropriate digit; it should normally be @samp{.1}.
+
+@item man1ext
+The file name extension for installed section 1 man pages.
+@item man2ext
+The file name extension for installed section 2 man pages.
+@item @dots{}
+Use these names instead of @samp{manext} if the package needs to install man
+pages in more than one section of the manual.
+@end table
+
+And finally, you should set the following variable:
+
+@table @samp
+@item srcdir
+The directory for the sources being compiled.  The value of this
+variable is normally inserted by the @code{configure} shell script.
+(If you are using Autoconf, use @samp{srcdir = @@srcdir@@}.)
+@end table
+
+For example:
+
+@smallexample
+@c I have changed some of the comments here slightly to fix an overfull
+@c hbox, so the make manual can format correctly. --roland
+# Common prefix for installation directories.
+# NOTE: This directory must exist when you start the install.
+prefix = /usr/local
+datarootdir = $(prefix)/share
+datadir = $(datarootdir)
+exec_prefix = $(prefix)
+# Where to put the executable for the command 'gcc'.
+bindir = $(exec_prefix)/bin
+# Where to put the directories used by the compiler.
+libexecdir = $(exec_prefix)/libexec
+# Where to put the Info files.
+infodir = $(datarootdir)/info
+@end smallexample
+
+If your program installs a large number of files into one of the
+standard user-specified directories, it might be useful to group them
+into a subdirectory particular to that program.  If you do this, you
+should write the @code{install} rule to create these subdirectories.
+
+Do not expect the user to include the subdirectory name in the value of
+any of the variables listed above.  The idea of having a uniform set of
+variable names for installation directories is to enable the user to
+specify the exact same values for several different GNU packages.  In
+order for this to be useful, all the packages must be designed so that
+they will work sensibly when the user does so.
+
+At times, not all of these variables may be implemented in the current
+release of Autoconf and/or Automake; but as of Autoconf@tie{}2.60, we
+believe all of them are.  When any are missing, the descriptions here
+serve as specifications for what Autoconf will implement.  As a
+programmer, you can either use a development version of Autoconf or
+avoid using these variables until a stable release is made which
+supports them.
+
+
+@node Standard Targets
+@section Standard Targets for Users
+
+All GNU programs should have the following targets in their Makefiles:
+
+@table @samp
+@item all
+Compile the entire program.  This should be the default target.  This
+target need not rebuild any documentation files; Info files should
+normally be included in the distribution, and DVI (and other
+documentation format) files should be made only when explicitly asked
+for.
+
+By default, the Make rules should compile and link with @samp{-g}, so
+that executable programs have debugging symbols.  Otherwise, you are
+essentially helpless in the face of a crash, and it is often far from
+easy to reproduce with a fresh build.
+
+@item install
+Compile the program and copy the executables, libraries, and so on to
+the file names where they should reside for actual use.  If there is a
+simple test to verify that a program is properly installed, this target
+should run that test.
+
+Do not strip executables when installing them.  This helps eventual
+debugging that may be needed later, and nowadays disk space is cheap
+and dynamic loaders typically ensure debug sections are not loaded during
+normal execution.  Users that need stripped binaries may invoke the
+@code{install-strip} target to do that.
+
+If possible, write the @code{install} target rule so that it does not
+modify anything in the directory where the program was built, provided
+@samp{make all} has just been done.  This is convenient for building the
+program under one user name and installing it under another.
+
+The commands should create all the directories in which files are to be
+installed, if they don't already exist.  This includes the directories
+specified as the values of the variables @code{prefix} and
+@code{exec_prefix}, as well as all subdirectories that are needed.
+One way to do this is by means of an @code{installdirs} target
+as described below.
+
+Use @samp{-} before any command for installing a man page, so that
+@code{make} will ignore any errors.  This is in case there are systems
+that don't have the Unix man page documentation system installed.
+
+The way to install Info files is to copy them into @file{$(infodir)}
+with @code{$(INSTALL_DATA)} (@pxref{Command Variables}), and then run
+the @code{install-info} program if it is present.  @code{install-info}
+is a program that edits the Info @file{dir} file to add or update the
+menu entry for the given Info file; it is part of the Texinfo package.
+
+Here is a sample rule to install an Info file that also tries to
+handle some additional situations, such as @code{install-info} not
+being present.
+
+@comment This example has been carefully formatted for the Make manual.
+@comment Please do not reformat it without talking to bug-make@gnu.org.
+@smallexample
+do-install-info: foo.info installdirs
+        $(NORMAL_INSTALL)
+# Prefer an info file in . to one in srcdir.
+        if test -f foo.info; then d=.; \
+         else d="$(srcdir)"; fi; \
+        $(INSTALL_DATA) $$d/foo.info \
+          "$(DESTDIR)$(infodir)/foo.info"
+# Run install-info only if it exists.
+# Use 'if' instead of just prepending '-' to the
+# line so we notice real errors from install-info.
+# Use '$(SHELL) -c' because some shells do not
+# fail gracefully when there is an unknown command.
+        $(POST_INSTALL)
+        if $(SHELL) -c 'install-info --version' \
+           >/dev/null 2>&1; then \
+          install-info --dir-file="$(DESTDIR)$(infodir)/dir" \
+                       "$(DESTDIR)$(infodir)/foo.info"; \
+        else true; fi
+@end smallexample
+
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands.  @xref{Install Command
+Categories}.
+
+@item install-html
+@itemx install-dvi
+@itemx install-pdf
+@itemx install-ps
+These targets install documentation in formats other than Info;
+they're intended to be called explicitly by the person installing the
+package, if that format is desired.  GNU prefers Info files, so these
+must be installed by the @code{install} target.
+
+When you have many documentation files to install, we recommend that
+you avoid collisions and clutter by arranging for these targets to
+install in subdirectories of the appropriate installation directory,
+such as @code{htmldir}.  As one example, if your package has multiple
+manuals, and you wish to install HTML documentation with many files
+(such as the ``split'' mode output by @code{makeinfo --html}), you'll
+certainly want to use subdirectories, or two nodes with the same name
+in different manuals will overwrite each other.
+
+Please make these @code{install-@var{format}} targets invoke the
+commands for the @var{format} target, for example, by making
+@var{format} a dependency.
+
+@item uninstall
+Delete all the installed files---the copies that the @samp{install}
+and @samp{install-*} targets create.
+
+This rule should not modify the directories where compilation is done,
+only the directories where files are installed.
+
+The uninstallation commands are divided into three categories, just like
+the installation commands.  @xref{Install Command Categories}.
+
+@item install-strip
+Like @code{install}, but strip the executable files while installing
+them.  In simple cases, this target can use the @code{install} target in
+a simple way:
+
+@smallexample
+install-strip:
+        $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \
+                install
+@end smallexample
+
+But if the package installs scripts as well as real executables, the
+@code{install-strip} target can't just refer to the @code{install}
+target; it has to strip the executables but not the scripts.
+
+@code{install-strip} should not strip the executables in the build
+directory which are being copied for installation.  It should only strip
+the copies that are installed.
+
+Normally we do not recommend stripping an executable unless you are sure
+the program has no bugs.  However, it can be reasonable to install a
+stripped executable for actual execution while saving the unstripped
+executable elsewhere in case there is a bug.
+
+@item clean
+Delete all files in the current directory that are normally created by
+building the program.  Also delete files in other directories if they
+are created by this makefile.  However, don't delete the files that
+record the configuration.  Also preserve files that could be made by
+building, but normally aren't because the distribution comes with
+them.  There is no need to delete parent directories that were created
+with @samp{mkdir -p}, since they could have existed anyway.
+
+Delete @file{.dvi} files here if they are not part of the distribution.
+
+@item distclean
+Delete all files in the current directory (or created by this
+makefile) that are created by configuring or building the program.  If
+you have unpacked the source and built the program without creating
+any other files, @samp{make distclean} should leave only the files
+that were in the distribution.  However, there is no need to delete
+parent directories that were created with @samp{mkdir -p}, since they
+could have existed anyway.
+
+@item mostlyclean
+Like @samp{clean}, but may refrain from deleting a few files that people
+normally don't want to recompile.  For example, the @samp{mostlyclean}
+target for GCC does not delete @file{libgcc.a}, because recompiling it
+is rarely necessary and takes a lot of time.
+
+@item maintainer-clean
+Delete almost everything that can be reconstructed with this Makefile.
+This typically includes everything deleted by @code{distclean}, plus
+more: C source files produced by Bison, tags tables, Info files, and
+so on.
+
+The reason we say ``almost everything'' is that running the command
+@samp{make maintainer-clean} should not delete @file{configure} even
+if @file{configure} can be remade using a rule in the Makefile.  More
+generally, @samp{make maintainer-clean} should not delete anything
+that needs to exist in order to run @file{configure} and then begin to
+build the program.  Also, there is no need to delete parent
+directories that were created with @samp{mkdir -p}, since they could
+have existed anyway.  These are the only exceptions;
+@code{maintainer-clean} should delete everything else that can be
+rebuilt.
+
+The @samp{maintainer-clean} target is intended to be used by a maintainer of
+the package, not by ordinary users.  You may need special tools to
+reconstruct some of the files that @samp{make maintainer-clean} deletes.
+Since these files are normally included in the distribution, we don't
+take care to make them easy to reconstruct.  If you find you need to
+unpack the full distribution again, don't blame us.
+
+To help make users aware of this, the commands for the special
+@code{maintainer-clean} target should start with these two:
+
+@smallexample
+@@echo 'This command is intended for maintainers to use; it'
+@@echo 'deletes files that may need special tools to rebuild.'
+@end smallexample
+
+@item TAGS
+Update a tags table for this program.
+@c ADR: how?
+
+@item info
+Generate any Info files needed.  The best way to write the rules is as
+follows:
+
+@smallexample
+info: foo.info
+
+foo.info: foo.texi chap1.texi chap2.texi
+        $(MAKEINFO) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{MAKEINFO} in the Makefile.  It should
+run the @code{makeinfo} program, which is part of the Texinfo
+distribution.
+
+Normally a GNU distribution comes with Info files, and that means the
+Info files are present in the source directory.  Therefore, the Make
+rule for an info file should update it in the source directory.  When
+users build the package, ordinarily Make will not update the Info files
+because they will already be up to date.
+
+@item dvi
+@itemx html
+@itemx pdf
+@itemx ps
+Generate documentation files in the given format.  These targets
+should always exist, but any or all can be a no-op if the given output
+format cannot be generated.  These targets should not be dependencies
+of the @code{all} target; the user must manually invoke them.
+
+Here's an example rule for generating DVI files from Texinfo:
+
+@smallexample
+dvi: foo.dvi
+
+foo.dvi: foo.texi chap1.texi chap2.texi
+        $(TEXI2DVI) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+You must define the variable @code{TEXI2DVI} in the Makefile.  It
+should run the program @code{texi2dvi}, which is part of the Texinfo
+distribution.  (@code{texi2dvi} uses @TeX{} to do the real work of
+formatting. @TeX{} is not distributed with Texinfo.)  Alternatively,
+write only the dependencies, and allow GNU @code{make} to provide the
+command.
+
+Here's another example, this one for generating HTML from Texinfo:
+
+@smallexample
+html: foo.html
+
+foo.html: foo.texi chap1.texi chap2.texi
+        $(TEXI2HTML) $(srcdir)/foo.texi
+@end smallexample
+
+@noindent
+Again, you would define the variable @code{TEXI2HTML} in the Makefile;
+for example, it might run @code{makeinfo --no-split --html}
+(@command{makeinfo} is part of the Texinfo distribution).
+
+@item dist
+Create a distribution tar file for this program.  The tar file should be
+set up so that the file names in the tar file start with a subdirectory
+name which is the name of the package it is a distribution for.  This
+name can include the version number.
+
+For example, the distribution tar file of GCC version 1.40 unpacks into
+a subdirectory named @file{gcc-1.40}.
+
+The easiest way to do this is to create a subdirectory appropriately
+named, use @code{ln} or @code{cp} to install the proper files in it, and
+then @code{tar} that subdirectory.
+
+Compress the tar file with @code{gzip}.  For example, the actual
+distribution file for GCC version 1.40 is called @file{gcc-1.40.tar.gz}.
+It is ok to support other free compression formats as well.
+
+The @code{dist} target should explicitly depend on all non-source files
+that are in the distribution, to make sure they are up to date in the
+distribution.
+@ifset CODESTD
+@xref{Releases, , Making Releases}.
+@end ifset
+@ifclear CODESTD
+@xref{Releases, , Making Releases, standards, GNU Coding Standards}.
+@end ifclear
+
+@item check
+Perform self-tests (if any).  The user must build the program before
+running the tests, but need not install the program; you should write
+the self-tests so that they work when the program is built but not
+installed.
+@end table
+
+The following targets are suggested as conventional names, for programs
+in which they are useful.
+
+@table @code
+@item installcheck
+Perform installation tests (if any).  The user must build and install
+the program before running the tests.  You should not assume that
+@file{$(bindir)} is in the search path.
+
+@item installdirs
+It's useful to add a target named @samp{installdirs} to create the
+directories where files are installed, and their parent directories.
+There is a script called @file{mkinstalldirs} which is convenient for
+this; you can find it in the Gnulib package.
+You can use a rule like this:
+
+@comment This has been carefully formatted to look decent in the Make manual.
+@comment Please be sure not to make it extend any further to the right.--roland
+@smallexample
+# Make sure all installation directories (e.g. $(bindir))
+# actually exist by making them if necessary.
+installdirs: mkinstalldirs
+        $(srcdir)/mkinstalldirs $(bindir) $(datadir) \
+                                $(libdir) $(infodir) \
+                                $(mandir)
+@end smallexample
+
+@noindent
+or, if you wish to support @env{DESTDIR} (strongly encouraged),
+
+@smallexample
+# Make sure all installation directories (e.g. $(bindir))
+# actually exist by making them if necessary.
+installdirs: mkinstalldirs
+        $(srcdir)/mkinstalldirs \
+            $(DESTDIR)$(bindir) $(DESTDIR)$(datadir) \
+            $(DESTDIR)$(libdir) $(DESTDIR)$(infodir) \
+            $(DESTDIR)$(mandir)
+@end smallexample
+
+This rule should not modify the directories where compilation is done.
+It should do nothing but create installation directories.
+@end table
+
+@node Install Command Categories
+@section Install Command Categories
+
+@cindex pre-installation commands
+@cindex post-installation commands
+When writing the @code{install} target, you must classify all the
+commands into three categories: normal ones, @dfn{pre-installation}
+commands and @dfn{post-installation} commands.
+
+Normal commands move files into their proper places, and set their
+modes.  They may not alter any files except the ones that come entirely
+from the package they belong to.
+
+Pre-installation and post-installation commands may alter other files;
+in particular, they can edit global configuration files or data bases.
+
+Pre-installation commands are typically executed before the normal
+commands, and post-installation commands are typically run after the
+normal commands.
+
+The most common use for a post-installation command is to run
+@code{install-info}.  This cannot be done with a normal command, since
+it alters a file (the Info directory) which does not come entirely and
+solely from the package being installed.  It is a post-installation
+command because it needs to be done after the normal command which
+installs the package's Info files.
+
+Most programs don't need any pre-installation commands, but we have the
+feature just in case it is needed.
+
+To classify the commands in the @code{install} rule into these three
+categories, insert @dfn{category lines} among them.  A category line
+specifies the category for the commands that follow.
+
+A category line consists of a tab and a reference to a special Make
+variable, plus an optional comment at the end.  There are three
+variables you can use, one for each category; the variable name
+specifies the category.  Category lines are no-ops in ordinary execution
+because these three Make variables are normally undefined (and you
+@emph{should not} define them in the makefile).
+
+Here are the three possible category lines, each with a comment that
+explains what it means:
+
+@smallexample
+        $(PRE_INSTALL)     # @r{Pre-install commands follow.}
+        $(POST_INSTALL)    # @r{Post-install commands follow.}
+        $(NORMAL_INSTALL)  # @r{Normal commands follow.}
+@end smallexample
+
+If you don't use a category line at the beginning of the @code{install}
+rule, all the commands are classified as normal until the first category
+line.  If you don't use any category lines, all the commands are
+classified as normal.
+
+These are the category lines for @code{uninstall}:
+
+@smallexample
+        $(PRE_UNINSTALL)     # @r{Pre-uninstall commands follow.}
+        $(POST_UNINSTALL)    # @r{Post-uninstall commands follow.}
+        $(NORMAL_UNINSTALL)  # @r{Normal commands follow.}
+@end smallexample
+
+Typically, a pre-uninstall command would be used for deleting entries
+from the Info directory.
+
+If the @code{install} or @code{uninstall} target has any dependencies
+which act as subroutines of installation, then you should start
+@emph{each} dependency's commands with a category line, and start the
+main target's commands with a category line also.  This way, you can
+ensure that each command is placed in the right category regardless of
+which of the dependencies actually run.
+
+Pre-installation and post-installation commands should not run any
+programs except for these:
+
+@example
+[ basename bash cat chgrp chmod chown cmp cp dd diff echo
+egrep expand expr false fgrep find getopt grep gunzip gzip
+hostname install install-info kill ldconfig ln ls md5sum
+mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee
+test touch true uname xargs yes
+@end example
+
+@cindex binary packages
+The reason for distinguishing the commands in this way is for the sake
+of making binary packages.  Typically a binary package contains all the
+executables and other files that need to be installed, and has its own
+method of installing them---so it does not need to run the normal
+installation commands.  But installing the binary package does need to
+execute the pre-installation and post-installation commands.
+
+Programs to build binary packages work by extracting the
+pre-installation and post-installation commands.  Here is one way of
+extracting the pre-installation commands (the @option{-s} option to
+@command{make} is needed to silence messages about entering
+subdirectories):
+
+@smallexample
+make -s -n install -o all \
+      PRE_INSTALL=pre-install \
+      POST_INSTALL=post-install \
+      NORMAL_INSTALL=normal-install \
+  | gawk -f pre-install.awk
+@end smallexample
+
+@noindent
+where the file @file{pre-install.awk} could contain this:
+
+@smallexample
+$0 ~ /^(normal-install|post-install)[ \t]*$/ @{on = 0@}
+on @{print $0@}
+$0 ~ /^pre-install[ \t]*$/ @{on = 1@}
+@end smallexample
diff --git a/doc/make.info b/doc/make.info
new file mode 100644
index 0000000..0c4ccd7
--- /dev/null
+++ b/doc/make.info
@@ -0,0 +1,205 @@
+This is make.info, produced by makeinfo version 5.2 from make.texi.
+
+This file documents the GNU 'make' utility, which determines
+automatically which pieces of a large program need to be recompiled, and
+issues the commands to recompile them.
+
+   This is Edition 0.74, last updated 3 January 2017, of 'The GNU Make
+Manual', for GNU 'make' version 4.2.90.
+
+   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+2010, 2011, 2012, 2013, 2014, 2015, 2016 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, with the Front-Cover Texts
+     being "A GNU Manual," and with the Back-Cover Texts as in (a)
+     below.  A copy of the license is included in the section entitled
+     "GNU Free Documentation License."
+
+     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
+     modify this GNU manual.  Buying copies from the FSF supports it in
+     developing GNU and promoting software freedom."
+INFO-DIR-SECTION Software development
+START-INFO-DIR-ENTRY
+* Make: (make).            Remake files automatically.
+END-INFO-DIR-ENTRY
+
+
+Indirect:
+make.info-1: 1357
+make.info-2: 307029
+
+Tag Table:
+(Indirect)
+Node: Top1357
+Node: Overview16543
+Node: Preparing17556
+Node: Reading18524
+Node: Bugs19451
+Node: Introduction21280
+Node: Rule Introduction22873
+Node: Simple Makefile24806
+Node: How Make Works28542
+Node: Variables Simplify31191
+Node: make Deduces33397
+Node: Combine By Prerequisite35130
+Node: Cleanup36159
+Node: Makefiles37577
+Node: Makefile Contents38413
+Node: Splitting Lines41586
+Node: Makefile Names43346
+Node: Include44953
+Ref: Include-Footnote-148697
+Node: MAKEFILES Variable48831
+Node: Remaking Makefiles50372
+Node: Overriding Makefiles54597
+Node: Reading Makefiles56625
+Node: Secondary Expansion60087
+Node: Rules67548
+Node: Rule Example70221
+Node: Rule Syntax71074
+Node: Prerequisite Types73669
+Node: Wildcards76536
+Node: Wildcard Examples78255
+Node: Wildcard Pitfall79605
+Node: Wildcard Function81394
+Node: Directory Search83178
+Node: General Search84313
+Node: Selective Search86020
+Node: Search Algorithm89010
+Node: Recipes/Search91528
+Node: Implicit/Search92851
+Node: Libraries/Search93793
+Node: Phony Targets95764
+Node: Force Targets100601
+Node: Empty Targets101638
+Node: Special Targets102940
+Node: Multiple Targets110740
+Node: Multiple Rules112600
+Node: Static Pattern114818
+Node: Static Usage115470
+Node: Static versus Implicit119189
+Node: Double-Colon120929
+Node: Automatic Prerequisites122689
+Node: Recipes126950
+Node: Recipe Syntax128122
+Node: Splitting Recipe Lines130237
+Node: Variables in Recipes133390
+Node: Echoing134716
+Node: Execution135928
+Ref: Execution-Footnote-1137341
+Node: One Shell137486
+Node: Choosing the Shell140804
+Node: Parallel144948
+Node: Parallel Output147617
+Node: Parallel Input152044
+Node: Errors153163
+Node: Interrupts156827
+Node: Recursion158410
+Node: MAKE Variable160507
+Node: Variables/Recursion162750
+Node: Options/Recursion168195
+Node: -w Option174201
+Node: Canned Recipes175196
+Node: Empty Recipes178179
+Node: Using Variables179619
+Node: Reference183047
+Node: Flavors184605
+Node: Advanced190584
+Node: Substitution Refs191089
+Node: Computed Names192642
+Node: Values197190
+Node: Setting198107
+Node: Appending201146
+Node: Override Directive205088
+Node: Multi-Line206715
+Node: Undefine Directive209539
+Node: Environment210628
+Node: Target-specific212880
+Node: Pattern-specific215907
+Node: Suppressing Inheritance217754
+Node: Special Variables219207
+Node: Conditionals225616
+Node: Conditional Example226329
+Node: Conditional Syntax228892
+Node: Testing Flags234652
+Node: Functions235753
+Node: Syntax of Functions237313
+Node: Text Functions239647
+Node: File Name Functions248212
+Node: Conditional Functions253438
+Node: Foreach Function255813
+Node: File Function259026
+Node: Call Function261583
+Node: Value Function264468
+Node: Eval Function265905
+Node: Origin Function268181
+Node: Flavor Function271407
+Node: Make Control Functions272451
+Node: Shell Function274137
+Node: Guile Function275896
+Node: Running276646
+Node: Makefile Arguments278627
+Node: Goals279343
+Node: Instead of Execution284082
+Node: Avoiding Compilation287797
+Node: Overriding289772
+Node: Testing292084
+Node: Options Summary293968
+Node: Implicit Rules307029
+Node: Using Implicit309166
+Node: Catalogue of Rules312685
+Node: Implicit Variables322029
+Node: Chained Rules327102
+Node: Pattern Rules331112
+Node: Pattern Intro332646
+Node: Pattern Examples335228
+Node: Automatic Variables337035
+Node: Pattern Match344385
+Node: Match-Anything Rules347708
+Node: Canceling Rules351587
+Node: Last Resort352301
+Node: Suffix Rules354130
+Node: Implicit Rule Search357855
+Node: Archives361354
+Node: Archive Members362059
+Node: Archive Update363669
+Node: Archive Symbols365580
+Node: Archive Pitfalls366813
+Node: Archive Suffix Rules367535
+Node: Extending make369083
+Node: Guile Integration370228
+Node: Guile Types371456
+Node: Guile Interface373876
+Node: Guile Example375162
+Node: Loading Objects377353
+Node: load Directive378843
+Node: Remaking Loaded Objects381597
+Node: Loaded Object API382231
+Node: Loaded Object Example388993
+Node: Integrating make391240
+Node: Job Slots391991
+Node: POSIX Jobserver395423
+Node: Windows Jobserver397817
+Node: Terminal Output399170
+Node: Features401559
+Node: Missing410728
+Node: Makefile Conventions414453
+Node: Makefile Basics415432
+Node: Utilities in Makefiles418599
+Node: Command Variables421098
+Node: DESTDIR424338
+Node: Directory Variables426505
+Node: Standard Targets441862
+Node: Install Command Categories455968
+Node: Quick Reference460494
+Node: Error Messages473208
+Node: Complex Makefile481162
+Node: GNU Free Documentation License489780
+Node: Concept Index514922
+Node: Name Index586511
+
+End Tag Table
diff --git a/doc/make.info-1 b/doc/make.info-1
new file mode 100644
index 0000000..75cce74
--- /dev/null
+++ b/doc/make.info-1
@@ -0,0 +1,7348 @@
+This is make.info, produced by makeinfo version 5.2 from make.texi.
+
+This file documents the GNU 'make' utility, which determines
+automatically which pieces of a large program need to be recompiled, and
+issues the commands to recompile them.
+
+   This is Edition 0.74, last updated 3 January 2017, of 'The GNU Make
+Manual', for GNU 'make' version 4.2.90.
+
+   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+2010, 2011, 2012, 2013, 2014, 2015, 2016 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, with the Front-Cover Texts
+     being "A GNU Manual," and with the Back-Cover Texts as in (a)
+     below.  A copy of the license is included in the section entitled
+     "GNU Free Documentation License."
+
+     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
+     modify this GNU manual.  Buying copies from the FSF supports it in
+     developing GNU and promoting software freedom."
+INFO-DIR-SECTION Software development
+START-INFO-DIR-ENTRY
+* Make: (make).            Remake files automatically.
+END-INFO-DIR-ENTRY
+
+
+File: make.info,  Node: Top,  Next: Overview,  Prev: (dir),  Up: (dir)
+
+GNU 'make'
+**********
+
+This file documents the GNU 'make' utility, which determines
+automatically which pieces of a large program need to be recompiled, and
+issues the commands to recompile them.
+
+   This is Edition 0.74, last updated 3 January 2017, of 'The GNU Make
+Manual', for GNU 'make' version 4.2.90.
+
+   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
+1997, 1998, 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,
+2010, 2011, 2012, 2013, 2014, 2015, 2016 Free Software Foundation, Inc.
+
+     Permission is granted to copy, distribute and/or modify this
+     document under the terms of the GNU Free Documentation License,
+     Version 1.3 or any later version published by the Free Software
+     Foundation; with no Invariant Sections, with the Front-Cover Texts
+     being "A GNU Manual," and with the Back-Cover Texts as in (a)
+     below.  A copy of the license is included in the section entitled
+     "GNU Free Documentation License."
+
+     (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
+     modify this GNU manual.  Buying copies from the FSF supports it in
+     developing GNU and promoting software freedom."
+
+* Menu:
+
+* Overview::                    Overview of 'make'.
+* Introduction::                An introduction to 'make'.
+* Makefiles::                   Makefiles tell 'make' what to do.
+* Rules::                       Rules describe when a file must be remade.
+* Recipes::                     Recipes say how to remake a file.
+* Using Variables::             You can use variables to avoid repetition.
+* Conditionals::                Use or ignore parts of the makefile based
+                                  on the values of variables.
+* Functions::                   Many powerful ways to manipulate text.
+* Invoking make: Running.       How to invoke 'make' on the command line.
+* Implicit Rules::              Use implicit rules to treat many files alike,
+                                  based on their file names.
+* Archives::                    How 'make' can update library archives.
+* Extending make::              Using extensions to 'make'.
+* Integrating make::            Integrating 'make' with other tools.
+* Features::                    Features GNU 'make' has over other 'make's.
+* Missing::                     What GNU 'make' lacks from other 'make's.
+* Makefile Conventions::        Conventions for writing makefiles for
+                                  GNU programs.
+* Quick Reference::             A quick reference for experienced users.
+* Error Messages::              A list of common errors generated by 'make'.
+* Complex Makefile::            A real example of a straightforward,
+                                  but nontrivial, makefile.
+
+* GNU Free Documentation License::  License for copying this manual.
+* Concept Index::               Index of Concepts.
+* Name Index::                  Index of Functions, Variables, & Directives.
+
+ -- The Detailed Node Listing --
+
+Overview of 'make'
+
+* Preparing::                   Preparing and running 'make'.
+* Reading::                     On reading this text.
+* Bugs::                        Problems and bugs.
+
+An Introduction to Makefiles
+
+* Rule Introduction::           What a rule looks like.
+* Simple Makefile::             A simple makefile.
+* How Make Works::              How 'make' processes this makefile.
+* Variables Simplify::          Variables make makefiles simpler.
+* make Deduces::                Letting 'make' deduce the recipes.
+* Combine By Prerequisite::     Another style of makefile.
+* Cleanup::                     Rules for cleaning the directory.
+
+Writing Makefiles
+
+* Makefile Contents::           What makefiles contain.
+* Makefile Names::              How to name your makefile.
+* Include::                     How one makefile can use another makefile.
+* MAKEFILES Variable::          The environment can specify extra makefiles.
+* Remaking Makefiles::          How makefiles get remade.
+* Overriding Makefiles::        How to override part of one makefile
+                                  with another makefile.
+* Reading Makefiles::           How makefiles are parsed.
+* Secondary Expansion::         How and when secondary expansion is performed.
+
+What Makefiles Contain
+
+* Splitting Lines::             Splitting long lines in makefiles
+
+Writing Rules
+
+* Rule Example::                An example explained.
+* Rule Syntax::                 General syntax explained.
+* Prerequisite Types::          There are two types of prerequisites.
+* Wildcards::                   Using wildcard characters such as '*'.
+* Directory Search::            Searching other directories for source files.
+* Phony Targets::               Using a target that is not a real file's name.
+* Force Targets::               You can use a target without a recipe
+                                  or prerequisites to mark other targets
+                                  as phony.
+* Empty Targets::               When only the date matters and the
+                                  files are empty.
+* Special Targets::             Targets with special built-in meanings.
+* Multiple Targets::            When to make use of several targets in a rule.
+* Multiple Rules::              How to use several rules with the same target.
+* Static Pattern::              Static pattern rules apply to multiple targets
+                                  and can vary the prerequisites according to
+                                  the target name.
+* Double-Colon::                How to use a special kind of rule to allow
+                                  several independent rules for one target.
+* Automatic Prerequisites::     How to automatically generate rules giving
+                                  prerequisites from source files themselves.
+
+Using Wildcard Characters in File Names
+
+* Wildcard Examples::           Several examples.
+* Wildcard Pitfall::            Problems to avoid.
+* Wildcard Function::           How to cause wildcard expansion where
+                                  it does not normally take place.
+
+Searching Directories for Prerequisites
+
+* General Search::              Specifying a search path that applies
+                                  to every prerequisite.
+* Selective Search::            Specifying a search path
+                                  for a specified class of names.
+* Search Algorithm::            When and how search paths are applied.
+* Recipes/Search::              How to write recipes that work together
+                                  with search paths.
+* Implicit/Search::             How search paths affect implicit rules.
+* Libraries/Search::            Directory search for link libraries.
+
+Static Pattern Rules
+
+* Static Usage::                The syntax of static pattern rules.
+* Static versus Implicit::      When are they better than implicit rules?
+
+Writing Recipes in Rules
+
+* Recipe Syntax::               Recipe syntax features and pitfalls.
+* Echoing::                     How to control when recipes are echoed.
+* Execution::                   How recipes are executed.
+* Parallel::                    How recipes can be executed in parallel.
+* Errors::                      What happens after a recipe execution error.
+* Interrupts::                  What happens when a recipe is interrupted.
+* Recursion::                   Invoking 'make' from makefiles.
+* Canned Recipes::              Defining canned recipes.
+* Empty Recipes::               Defining useful, do-nothing recipes.
+
+Recipe Syntax
+
+* Splitting Recipe Lines::      Breaking long recipe lines for readability.
+* Variables in Recipes::        Using 'make' variables in recipes.
+
+Recipe Execution
+
+* One Shell::                   One shell for all lines in a recipe.
+* Choosing the Shell::          How 'make' chooses the shell used
+                                  to run recipes.
+
+Parallel Execution
+
+* Parallel Output::             Handling output during parallel execution
+* Parallel Input::              Handling input during parallel execution
+
+Recursive Use of 'make'
+
+* MAKE Variable::               The special effects of using '$(MAKE)'.
+* Variables/Recursion::         How to communicate variables to a sub-'make'.
+* Options/Recursion::           How to communicate options to a sub-'make'.
+* -w Option::                   How the '-w' or '--print-directory' option
+                                  helps debug use of recursive 'make' commands.
+
+How to Use Variables
+
+* Reference::                   How to use the value of a variable.
+* Flavors::                     Variables come in two flavors.
+* Advanced::                    Advanced features for referencing a variable.
+* Values::                      All the ways variables get their values.
+* Setting::                     How to set a variable in the makefile.
+* Appending::                   How to append more text to the old value
+                                  of a variable.
+* Override Directive::          How to set a variable in the makefile even if
+                                  the user has set it with a command argument.
+* Multi-Line::                  An alternate way to set a variable
+                                  to a multi-line string.
+* Undefine Directive::          How to undefine a variable so that it appears
+                                  as if it was never set.
+* Environment::                 Variable values can come from the environment.
+* Target-specific::             Variable values can be defined on a per-target
+                                  basis.
+* Pattern-specific::            Target-specific variable values can be applied
+                                  to a group of targets that match a pattern.
+* Suppressing Inheritance::     Suppress inheritance of variables.
+* Special Variables::           Variables with special meaning or behavior.
+
+Advanced Features for Reference to Variables
+
+* Substitution Refs::           Referencing a variable with
+                                  substitutions on the value.
+* Computed Names::              Computing the name of the variable to refer to.
+
+Conditional Parts of Makefiles
+
+* Conditional Example::         Example of a conditional
+* Conditional Syntax::          The syntax of conditionals.
+* Testing Flags::               Conditionals that test flags.
+
+Functions for Transforming Text
+
+* Syntax of Functions::         How to write a function call.
+* Text Functions::              General-purpose text manipulation functions.
+* File Name Functions::         Functions for manipulating file names.
+* Conditional Functions::       Functions that implement conditions.
+* Foreach Function::            Repeat some text with controlled variation.
+* File Function::               Write text to a file.
+* Call Function::               Expand a user-defined function.
+* Value Function::              Return the un-expanded value of a variable.
+* Eval Function::               Evaluate the arguments as makefile syntax.
+* Origin Function::             Find where a variable got its value.
+* Flavor Function::             Find out the flavor of a variable.
+* Make Control Functions::      Functions that control how make runs.
+* Shell Function::              Substitute the output of a shell command.
+* Guile Function::              Use GNU Guile embedded scripting language.
+
+How to Run 'make'
+
+* Makefile Arguments::          How to specify which makefile to use.
+* Goals::                       How to use goal arguments to specify which
+                                  parts of the makefile to use.
+* Instead of Execution::        How to use mode flags to specify what
+                                  kind of thing to do with the recipes
+                                  in the makefile other than simply
+                                  execute them.
+* Avoiding Compilation::        How to avoid recompiling certain files.
+* Overriding::                  How to override a variable to specify
+                                  an alternate compiler and other things.
+* Testing::                     How to proceed past some errors, to
+                                  test compilation.
+* Options Summary::             Summary of Options
+
+Using Implicit Rules
+
+* Using Implicit::              How to use an existing implicit rule
+                                  to get the recipes for updating a file.
+* Catalogue of Rules::          A list of built-in rules.
+* Implicit Variables::          How to change what predefined rules do.
+* Chained Rules::               How to use a chain of implicit rules.
+* Pattern Rules::               How to define new implicit rules.
+* Last Resort::                 How to define a recipe for rules which
+                                  cannot find any.
+* Suffix Rules::                The old-fashioned style of implicit rule.
+* Implicit Rule Search::        The precise algorithm for applying
+                                  implicit rules.
+
+Defining and Redefining Pattern Rules
+
+* Pattern Intro::               An introduction to pattern rules.
+* Pattern Examples::            Examples of pattern rules.
+* Automatic Variables::         How to use automatic variables in the
+                                  recipe of implicit rules.
+* Pattern Match::               How patterns match.
+* Match-Anything Rules::        Precautions you should take prior to
+                                  defining rules that can match any
+                                  target file whatever.
+* Canceling Rules::             How to override or cancel built-in rules.
+
+Using 'make' to Update Archive Files
+
+* Archive Members::             Archive members as targets.
+* Archive Update::              The implicit rule for archive member targets.
+* Archive Pitfalls::            Dangers to watch out for when using archives.
+* Archive Suffix Rules::        You can write a special kind of suffix rule
+                                  for updating archives.
+
+Implicit Rule for Archive Member Targets
+
+* Archive Symbols::             How to update archive symbol directories.
+
+Extending GNU 'make'
+
+* Guile Integration::           Using Guile as an embedded scripting language.
+* Loading Objects::             Loading dynamic objects as extensions.
+
+GNU Guile Integration
+
+* Guile Types::                 Converting Guile types to 'make' strings.
+* Guile Interface::             Invoking 'make' functions from Guile.
+* Guile Example::               Example using Guile in 'make'.
+
+Loading Dynamic Objects
+
+* load Directive::              Loading dynamic objects as extensions.
+* Remaking Loaded Objects::     How loaded objects get remade.
+* Loaded Object API::           Programmatic interface for loaded objects.
+* Loaded Object Example::       Example of a loaded object
+
+Integrating GNU 'make'
+
+* Job Slots::                   Share job slots with GNU 'make'.
+* Terminal Output::             Control output to terminals.
+
+Sharing Job Slots with GNU 'make'
+
+* POSIX Jobserver::             Using the jobserver on POSIX systems.
+* Windows Jobserver::           Using the jobserver on Windows systems.
+
+
+
+File: make.info,  Node: Overview,  Next: Introduction,  Prev: Top,  Up: Top
+
+1 Overview of 'make'
+********************
+
+The 'make' utility automatically determines which pieces of a large
+program need to be recompiled, and issues commands to recompile them.
+This manual describes GNU 'make', which was implemented by Richard
+Stallman and Roland McGrath.  Development since Version 3.76 has been
+handled by Paul D. Smith.
+
+   GNU 'make' conforms to section 6.2 of 'IEEE Standard 1003.2-1992'
+(POSIX.2).
+
+   Our examples show C programs, since they are most common, but you can
+use 'make' with any programming language whose compiler can be run with
+a shell command.  Indeed, 'make' is not limited to programs.  You can
+use it to describe any task where some files must be updated
+automatically from others whenever the others change.
+
+* Menu:
+
+* Preparing::                   Preparing and running 'make'.
+* Reading::                     On reading this text.
+* Bugs::                        Problems and bugs.
+
+
+File: make.info,  Node: Preparing,  Next: Reading,  Prev: Overview,  Up: Overview
+
+Preparing and Running Make
+==========================
+
+To prepare to use 'make', you must write a file called the "makefile"
+that describes the relationships among files in your program and
+provides commands for updating each file.  In a program, typically, the
+executable file is updated from object files, which are in turn made by
+compiling source files.
+
+   Once a suitable makefile exists, each time you change some source
+files, this simple shell command:
+
+     make
+
+suffices to perform all necessary recompilations.  The 'make' program
+uses the makefile data base and the last-modification times of the files
+to decide which of the files need to be updated.  For each of those
+files, it issues the recipes recorded in the data base.
+
+   You can provide command line arguments to 'make' to control which
+files should be recompiled, or how.  *Note How to Run 'make': Running.
+
+
+File: make.info,  Node: Reading,  Next: Bugs,  Prev: Preparing,  Up: Overview
+
+1.1 How to Read This Manual
+===========================
+
+If you are new to 'make', or are looking for a general introduction,
+read the first few sections of each chapter, skipping the later
+sections.  In each chapter, the first few sections contain introductory
+or general information and the later sections contain specialized or
+technical information.  The exception is the second chapter, *note An
+Introduction to Makefiles: Introduction, all of which is introductory.
+
+   If you are familiar with other 'make' programs, see *note Features of
+GNU 'make': Features, which lists the enhancements GNU 'make' has, and
+*note Incompatibilities and Missing Features: Missing, which explains
+the few things GNU 'make' lacks that others have.
+
+   For a quick summary, see *note Options Summary::, *note Quick
+Reference::, and *note Special Targets::.
+
+
+File: make.info,  Node: Bugs,  Prev: Reading,  Up: Overview
+
+1.2 Problems and Bugs
+=====================
+
+If you have problems with GNU 'make' or think you've found a bug, please
+report it to the developers; we cannot promise to do anything but we
+might well want to fix it.
+
+   Before reporting a bug, make sure you've actually found a real bug.
+Carefully reread the documentation and see if it really says you can do
+what you're trying to do.  If it's not clear whether you should be able
+to do something or not, report that too; it's a bug in the
+documentation!
+
+   Before reporting a bug or trying to fix it yourself, try to isolate
+it to the smallest possible makefile that reproduces the problem.  Then
+send us the makefile and the exact results 'make' gave you, including
+any error or warning messages.  Please don't paraphrase these messages:
+it's best to cut and paste them into your report.  When generating this
+small makefile, be sure to not use any non-free or unusual tools in your
+recipes: you can almost always emulate what such a tool would do with
+simple shell commands.  Finally, be sure to explain what you expected to
+occur; this will help us decide whether the problem was really in the
+documentation.
+
+   Once you have a precise problem you can report it in one of two ways.
+Either send electronic mail to:
+
+         bug-make@gnu.org
+
+or use our Web-based project management tool, at:
+
+         http://savannah.gnu.org/projects/make/
+
+In addition to the information above, please be careful to include the
+version number of 'make' you are using.  You can get this information
+with the command 'make --version'.  Be sure also to include the type of
+machine and operating system you are using.  One way to obtain this
+information is by looking at the final lines of output from the command
+'make --help'.
+
+
+File: make.info,  Node: Introduction,  Next: Makefiles,  Prev: Overview,  Up: Top
+
+2 An Introduction to Makefiles
+******************************
+
+You need a file called a "makefile" to tell 'make' what to do.  Most
+often, the makefile tells 'make' how to compile and link a program.
+
+   In this chapter, we will discuss a simple makefile that describes how
+to compile and link a text editor which consists of eight C source files
+and three header files.  The makefile can also tell 'make' how to run
+miscellaneous commands when explicitly asked (for example, to remove
+certain files as a clean-up operation).  To see a more complex example
+of a makefile, see *note Complex Makefile::.
+
+   When 'make' recompiles the editor, each changed C source file must be
+recompiled.  If a header file has changed, each C source file that
+includes the header file must be recompiled to be safe.  Each
+compilation produces an object file corresponding to the source file.
+Finally, if any source file has been recompiled, all the object files,
+whether newly made or saved from previous compilations, must be linked
+together to produce the new executable editor.
+
+* Menu:
+
+* Rule Introduction::           What a rule looks like.
+* Simple Makefile::             A simple makefile.
+* How Make Works::              How 'make' processes this makefile.
+* Variables Simplify::          Variables make makefiles simpler.
+* make Deduces::                Letting 'make' deduce the recipes.
+* Combine By Prerequisite::     Another style of makefile.
+* Cleanup::                     Rules for cleaning the directory.
+
+
+File: make.info,  Node: Rule Introduction,  Next: Simple Makefile,  Prev: Introduction,  Up: Introduction
+
+2.1 What a Rule Looks Like
+==========================
+
+A simple makefile consists of "rules" with the following shape:
+
+     TARGET ... : PREREQUISITES ...
+             RECIPE
+             ...
+             ...
+
+   A "target" is usually the name of a file that is generated by a
+program; examples of targets are executable or object files.  A target
+can also be the name of an action to carry out, such as 'clean' (*note
+Phony Targets::).
+
+   A "prerequisite" is a file that is used as input to create the
+target.  A target often depends on several files.
+
+   A "recipe" is an action that 'make' carries out.  A recipe may have
+more than one command, either on the same line or each on its own line.
+*Please note:* you need to put a tab character at the beginning of every
+recipe line!  This is an obscurity that catches the unwary.  If you
+prefer to prefix your recipes with a character other than tab, you can
+set the '.RECIPEPREFIX' variable to an alternate character (*note
+Special Variables::).
+
+   Usually a recipe is in a rule with prerequisites and serves to create
+a target file if any of the prerequisites change.  However, the rule
+that specifies a recipe for the target need not have prerequisites.  For
+example, the rule containing the delete command associated with the
+target 'clean' does not have prerequisites.
+
+   A "rule", then, explains how and when to remake certain files which
+are the targets of the particular rule.  'make' carries out the recipe
+on the prerequisites to create or update the target.  A rule can also
+explain how and when to carry out an action.  *Note Writing Rules:
+Rules.
+
+   A makefile may contain other text besides rules, but a simple
+makefile need only contain rules.  Rules may look somewhat more
+complicated than shown in this template, but all fit the pattern more or
+less.
+
+
+File: make.info,  Node: Simple Makefile,  Next: How Make Works,  Prev: Rule Introduction,  Up: Introduction
+
+2.2 A Simple Makefile
+=====================
+
+Here is a straightforward makefile that describes the way an executable
+file called 'edit' depends on eight object files which, in turn, depend
+on eight C source and three header files.
+
+   In this example, all the C files include 'defs.h', but only those
+defining editing commands include 'command.h', and only low level files
+that change the editor buffer include 'buffer.h'.
+
+     edit : main.o kbd.o command.o display.o \
+            insert.o search.o files.o utils.o
+             cc -o edit main.o kbd.o command.o display.o \
+                        insert.o search.o files.o utils.o
+
+     main.o : main.c defs.h
+             cc -c main.c
+     kbd.o : kbd.c defs.h command.h
+             cc -c kbd.c
+     command.o : command.c defs.h command.h
+             cc -c command.c
+     display.o : display.c defs.h buffer.h
+             cc -c display.c
+     insert.o : insert.c defs.h buffer.h
+             cc -c insert.c
+     search.o : search.c defs.h buffer.h
+             cc -c search.c
+     files.o : files.c defs.h buffer.h command.h
+             cc -c files.c
+     utils.o : utils.c defs.h
+             cc -c utils.c
+     clean :
+             rm edit main.o kbd.o command.o display.o \
+                insert.o search.o files.o utils.o
+
+We split each long line into two lines using backslash/newline; this is
+like using one long line, but is easier to read.  *Note Splitting Long
+Lines: Splitting Lines.
+
+   To use this makefile to create the executable file called 'edit',
+type:
+
+     make
+
+   To use this makefile to delete the executable file and all the object
+files from the directory, type:
+
+     make clean
+
+   In the example makefile, the targets include the executable file
+'edit', and the object files 'main.o' and 'kbd.o'.  The prerequisites
+are files such as 'main.c' and 'defs.h'.  In fact, each '.o' file is
+both a target and a prerequisite.  Recipes include 'cc -c main.c' and
+'cc -c kbd.c'.
+
+   When a target is a file, it needs to be recompiled or relinked if any
+of its prerequisites change.  In addition, any prerequisites that are
+themselves automatically generated should be updated first.  In this
+example, 'edit' depends on each of the eight object files; the object
+file 'main.o' depends on the source file 'main.c' and on the header file
+'defs.h'.
+
+   A recipe may follow each line that contains a target and
+prerequisites.  These recipes say how to update the target file.  A tab
+character (or whatever character is specified by the '.RECIPEPREFIX'
+variable; *note Special Variables::) must come at the beginning of every
+line in the recipe to distinguish recipes from other lines in the
+makefile.  (Bear in mind that 'make' does not know anything about how
+the recipes work.  It is up to you to supply recipes that will update
+the target file properly.  All 'make' does is execute the recipe you
+have specified when the target file needs to be updated.)
+
+   The target 'clean' is not a file, but merely the name of an action.
+Since you normally do not want to carry out the actions in this rule,
+'clean' is not a prerequisite of any other rule.  Consequently, 'make'
+never does anything with it unless you tell it specifically.  Note that
+this rule not only is not a prerequisite, it also does not have any
+prerequisites, so the only purpose of the rule is to run the specified
+recipe.  Targets that do not refer to files but are just actions are
+called "phony targets".  *Note Phony Targets::, for information about
+this kind of target.  *Note Errors in Recipes: Errors, to see how to
+cause 'make' to ignore errors from 'rm' or any other command.
+
+
+File: make.info,  Node: How Make Works,  Next: Variables Simplify,  Prev: Simple Makefile,  Up: Introduction
+
+2.3 How 'make' Processes a Makefile
+===================================
+
+By default, 'make' starts with the first target (not targets whose names
+start with '.').  This is called the "default goal".  ("Goals" are the
+targets that 'make' strives ultimately to update.  You can override this
+behavior using the command line (*note Arguments to Specify the Goals:
+Goals.) or with the '.DEFAULT_GOAL' special variable (*note Other
+Special Variables: Special Variables.).
+
+   In the simple example of the previous section, the default goal is to
+update the executable program 'edit'; therefore, we put that rule first.
+
+   Thus, when you give the command:
+
+     make
+
+'make' reads the makefile in the current directory and begins by
+processing the first rule.  In the example, this rule is for relinking
+'edit'; but before 'make' can fully process this rule, it must process
+the rules for the files that 'edit' depends on, which in this case are
+the object files.  Each of these files is processed according to its own
+rule.  These rules say to update each '.o' file by compiling its source
+file.  The recompilation must be done if the source file, or any of the
+header files named as prerequisites, is more recent than the object
+file, or if the object file does not exist.
+
+   The other rules are processed because their targets appear as
+prerequisites of the goal.  If some other rule is not depended on by the
+goal (or anything it depends on, etc.), that rule is not processed,
+unless you tell 'make' to do so (with a command such as 'make clean').
+
+   Before recompiling an object file, 'make' considers updating its
+prerequisites, the source file and header files.  This makefile does not
+specify anything to be done for them--the '.c' and '.h' files are not
+the targets of any rules--so 'make' does nothing for these files.  But
+'make' would update automatically generated C programs, such as those
+made by Bison or Yacc, by their own rules at this time.
+
+   After recompiling whichever object files need it, 'make' decides
+whether to relink 'edit'.  This must be done if the file 'edit' does not
+exist, or if any of the object files are newer than it.  If an object
+file was just recompiled, it is now newer than 'edit', so 'edit' is
+relinked.
+
+   Thus, if we change the file 'insert.c' and run 'make', 'make' will
+compile that file to update 'insert.o', and then link 'edit'.  If we
+change the file 'command.h' and run 'make', 'make' will recompile the
+object files 'kbd.o', 'command.o' and 'files.o' and then link the file
+'edit'.
+
+
+File: make.info,  Node: Variables Simplify,  Next: make Deduces,  Prev: How Make Works,  Up: Introduction
+
+2.4 Variables Make Makefiles Simpler
+====================================
+
+In our example, we had to list all the object files twice in the rule
+for 'edit' (repeated here):
+
+     edit : main.o kbd.o command.o display.o \
+                   insert.o search.o files.o utils.o
+             cc -o edit main.o kbd.o command.o display.o \
+                        insert.o search.o files.o utils.o
+
+   Such duplication is error-prone; if a new object file is added to the
+system, we might add it to one list and forget the other.  We can
+eliminate the risk and simplify the makefile by using a variable.
+"Variables" allow a text string to be defined once and substituted in
+multiple places later (*note How to Use Variables: Using Variables.).
+
+   It is standard practice for every makefile to have a variable named
+'objects', 'OBJECTS', 'objs', 'OBJS', 'obj', or 'OBJ' which is a list of
+all object file names.  We would define such a variable 'objects' with a
+line like this in the makefile:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+Then, each place we want to put a list of the object file names, we can
+substitute the variable's value by writing '$(objects)' (*note How to
+Use Variables: Using Variables.).
+
+   Here is how the complete simple makefile looks when you use a
+variable for the object files:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+     edit : $(objects)
+             cc -o edit $(objects)
+     main.o : main.c defs.h
+             cc -c main.c
+     kbd.o : kbd.c defs.h command.h
+             cc -c kbd.c
+     command.o : command.c defs.h command.h
+             cc -c command.c
+     display.o : display.c defs.h buffer.h
+             cc -c display.c
+     insert.o : insert.c defs.h buffer.h
+             cc -c insert.c
+     search.o : search.c defs.h buffer.h
+             cc -c search.c
+     files.o : files.c defs.h buffer.h command.h
+             cc -c files.c
+     utils.o : utils.c defs.h
+             cc -c utils.c
+     clean :
+             rm edit $(objects)
+
+
+File: make.info,  Node: make Deduces,  Next: Combine By Prerequisite,  Prev: Variables Simplify,  Up: Introduction
+
+2.5 Letting 'make' Deduce the Recipes
+=====================================
+
+It is not necessary to spell out the recipes for compiling the
+individual C source files, because 'make' can figure them out: it has an
+"implicit rule" for updating a '.o' file from a correspondingly named
+'.c' file using a 'cc -c' command.  For example, it will use the recipe
+'cc -c main.c -o main.o' to compile 'main.c' into 'main.o'.  We can
+therefore omit the recipes from the rules for the object files.  *Note
+Using Implicit Rules: Implicit Rules.
+
+   When a '.c' file is used automatically in this way, it is also
+automatically added to the list of prerequisites.  We can therefore omit
+the '.c' files from the prerequisites, provided we omit the recipe.
+
+   Here is the entire example, with both of these changes, and a
+variable 'objects' as suggested above:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+     edit : $(objects)
+             cc -o edit $(objects)
+
+     main.o : defs.h
+     kbd.o : defs.h command.h
+     command.o : defs.h command.h
+     display.o : defs.h buffer.h
+     insert.o : defs.h buffer.h
+     search.o : defs.h buffer.h
+     files.o : defs.h buffer.h command.h
+     utils.o : defs.h
+
+     .PHONY : clean
+     clean :
+             rm edit $(objects)
+
+This is how we would write the makefile in actual practice.  (The
+complications associated with 'clean' are described elsewhere.  See
+*note Phony Targets::, and *note Errors in Recipes: Errors.)
+
+   Because implicit rules are so convenient, they are important.  You
+will see them used frequently.
+
+
+File: make.info,  Node: Combine By Prerequisite,  Next: Cleanup,  Prev: make Deduces,  Up: Introduction
+
+2.6 Another Style of Makefile
+=============================
+
+When the objects of a makefile are created only by implicit rules, an
+alternative style of makefile is possible.  In this style of makefile,
+you group entries by their prerequisites instead of by their targets.
+Here is what one looks like:
+
+     objects = main.o kbd.o command.o display.o \
+               insert.o search.o files.o utils.o
+
+     edit : $(objects)
+             cc -o edit $(objects)
+
+     $(objects) : defs.h
+     kbd.o command.o files.o : command.h
+     display.o insert.o search.o files.o : buffer.h
+
+Here 'defs.h' is given as a prerequisite of all the object files;
+'command.h' and 'buffer.h' are prerequisites of the specific object
+files listed for them.
+
+   Whether this is better is a matter of taste: it is more compact, but
+some people dislike it because they find it clearer to put all the
+information about each target in one place.
+
+
+File: make.info,  Node: Cleanup,  Prev: Combine By Prerequisite,  Up: Introduction
+
+2.7 Rules for Cleaning the Directory
+====================================
+
+Compiling a program is not the only thing you might want to write rules
+for.  Makefiles commonly tell how to do a few other things besides
+compiling a program: for example, how to delete all the object files and
+executables so that the directory is 'clean'.
+
+   Here is how we could write a 'make' rule for cleaning our example
+editor:
+
+     clean:
+             rm edit $(objects)
+
+   In practice, we might want to write the rule in a somewhat more
+complicated manner to handle unanticipated situations.  We would do
+this:
+
+     .PHONY : clean
+     clean :
+             -rm edit $(objects)
+
+This prevents 'make' from getting confused by an actual file called
+'clean' and causes it to continue in spite of errors from 'rm'.  (See
+*note Phony Targets::, and *note Errors in Recipes: Errors.)
+
+A rule such as this should not be placed at the beginning of the
+makefile, because we do not want it to run by default!  Thus, in the
+example makefile, we want the rule for 'edit', which recompiles the
+editor, to remain the default goal.
+
+   Since 'clean' is not a prerequisite of 'edit', this rule will not run
+at all if we give the command 'make' with no arguments.  In order to
+make the rule run, we have to type 'make clean'.  *Note How to Run
+'make': Running.
+
+
+File: make.info,  Node: Makefiles,  Next: Rules,  Prev: Introduction,  Up: Top
+
+3 Writing Makefiles
+*******************
+
+The information that tells 'make' how to recompile a system comes from
+reading a data base called the "makefile".
+
+* Menu:
+
+* Makefile Contents::           What makefiles contain.
+* Makefile Names::              How to name your makefile.
+* Include::                     How one makefile can use another makefile.
+* MAKEFILES Variable::          The environment can specify extra makefiles.
+* Remaking Makefiles::          How makefiles get remade.
+* Overriding Makefiles::        How to override part of one makefile
+                                  with another makefile.
+* Reading Makefiles::           How makefiles are parsed.
+* Secondary Expansion::         How and when secondary expansion is performed.
+
+
+File: make.info,  Node: Makefile Contents,  Next: Makefile Names,  Prev: Makefiles,  Up: Makefiles
+
+3.1 What Makefiles Contain
+==========================
+
+Makefiles contain five kinds of things: "explicit rules", "implicit
+rules", "variable definitions", "directives", and "comments".  Rules,
+variables, and directives are described at length in later chapters.
+
+   * An "explicit rule" says when and how to remake one or more files,
+     called the rule's "targets".  It lists the other files that the
+     targets depend on, called the "prerequisites" of the target, and
+     may also give a recipe to use to create or update the targets.
+     *Note Writing Rules: Rules.
+
+   * An "implicit rule" says when and how to remake a class of files
+     based on their names.  It describes how a target may depend on a
+     file with a name similar to the target and gives a recipe to create
+     or update such a target.  *Note Using Implicit Rules: Implicit
+     Rules.
+
+   * A "variable definition" is a line that specifies a text string
+     value for a variable that can be substituted into the text later.
+     The simple makefile example shows a variable definition for
+     'objects' as a list of all object files (*note Variables Make
+     Makefiles Simpler: Variables Simplify.).
+
+   * A "directive" is an instruction for 'make' to do something special
+     while reading the makefile.  These include:
+
+        * Reading another makefile (*note Including Other Makefiles:
+          Include.).
+
+        * Deciding (based on the values of variables) whether to use or
+          ignore a part of the makefile (*note Conditional Parts of
+          Makefiles: Conditionals.).
+
+        * Defining a variable from a verbatim string containing multiple
+          lines (*note Defining Multi-Line Variables: Multi-Line.).
+
+   * '#' in a line of a makefile starts a "comment".  It and the rest of
+     the line are ignored, except that a trailing backslash not escaped
+     by another backslash will continue the comment across multiple
+     lines.  A line containing just a comment (with perhaps spaces
+     before it) is effectively blank, and is ignored.  If you want a
+     literal '#', escape it with a backslash (e.g., '\#').  Comments may
+     appear on any line in the makefile, although they are treated
+     specially in certain situations.
+
+     You cannot use comments within variable references or function
+     calls: any instance of '#' will be treated literally (rather than
+     as the start of a comment) inside a variable reference or function
+     call.
+
+     Comments within a recipe are passed to the shell, just as with any
+     other recipe text.  The shell decides how to interpret it: whether
+     or not this is a comment is up to the shell.
+
+     Within a 'define' directive, comments are not ignored during the
+     definition of the variable, but rather kept intact in the value of
+     the variable.  When the variable is expanded they will either be
+     treated as 'make' comments or as recipe text, depending on the
+     context in which the variable is evaluated.
+
+* Menu:
+
+* Splitting Lines::             Splitting long lines in makefiles
+
+
+File: make.info,  Node: Splitting Lines,  Prev: Makefile Contents,  Up: Makefile Contents
+
+3.1.1 Splitting Long Lines
+--------------------------
+
+Makefiles use a "line-based" syntax in which the newline character is
+special and marks the end of a statement.  GNU 'make' has no limit on
+the length of a statement line, up to the amount of memory in your
+computer.
+
+   However, it is difficult to read lines which are too long to display
+without wrapping or scrolling.  So, you can format your makefiles for
+readability by adding newlines into the middle of a statement: you do
+this by escaping the internal newlines with a backslash ('\') character.
+Where we need to make a distinction we will refer to "physical lines" as
+a single line ending with a newline (regardless of whether it is
+escaped) and a "logical line" being a complete statement including all
+escaped newlines up to the first non-escaped newline.
+
+   The way in which backslash/newline combinations are handled depends
+on whether the statement is a recipe line or a non-recipe line.
+Handling of backslash/newline in a recipe line is discussed later (*note
+Splitting Recipe Lines::).
+
+   Outside of recipe lines, backslash/newlines are converted into a
+single space character.  Once that is done, all whitespace around the
+backslash/newline is condensed into a single space: this includes all
+whitespace preceding the backslash, all whitespace at the beginning of
+the line after the backslash/newline, and any consecutive
+backslash/newline combinations.
+
+   If the '.POSIX' special target is defined then backslash/newline
+handling is modified slightly to conform to POSIX.2: first, whitespace
+preceding a backslash is not removed and second, consecutive
+backslash/newlines are not condensed.
+
+
+File: make.info,  Node: Makefile Names,  Next: Include,  Prev: Makefile Contents,  Up: Makefiles
+
+3.2 What Name to Give Your Makefile
+===================================
+
+By default, when 'make' looks for the makefile, it tries the following
+names, in order: 'GNUmakefile', 'makefile' and 'Makefile'.
+
+   Normally you should call your makefile either 'makefile' or
+'Makefile'.  (We recommend 'Makefile' because it appears prominently
+near the beginning of a directory listing, right near other important
+files such as 'README'.)  The first name checked, 'GNUmakefile', is not
+recommended for most makefiles.  You should use this name if you have a
+makefile that is specific to GNU 'make', and will not be understood by
+other versions of 'make'.  Other 'make' programs look for 'makefile' and
+'Makefile', but not 'GNUmakefile'.
+
+   If 'make' finds none of these names, it does not use any makefile.
+Then you must specify a goal with a command argument, and 'make' will
+attempt to figure out how to remake it using only its built-in implicit
+rules.  *Note Using Implicit Rules: Implicit Rules.
+
+   If you want to use a nonstandard name for your makefile, you can
+specify the makefile name with the '-f' or '--file' option.  The
+arguments '-f NAME' or '--file=NAME' tell 'make' to read the file NAME
+as the makefile.  If you use more than one '-f' or '--file' option, you
+can specify several makefiles.  All the makefiles are effectively
+concatenated in the order specified.  The default makefile names
+'GNUmakefile', 'makefile' and 'Makefile' are not checked automatically
+if you specify '-f' or '--file'.
+
+
+File: make.info,  Node: Include,  Next: MAKEFILES Variable,  Prev: Makefile Names,  Up: Makefiles
+
+3.3 Including Other Makefiles
+=============================
+
+The 'include' directive tells 'make' to suspend reading the current
+makefile and read one or more other makefiles before continuing.  The
+directive is a line in the makefile that looks like this:
+
+     include FILENAMES...
+
+FILENAMES can contain shell file name patterns.  If FILENAMES is empty,
+nothing is included and no error is printed.
+
+   Extra spaces are allowed and ignored at the beginning of the line,
+but the first character must not be a tab (or the value of
+'.RECIPEPREFIX')--if the line begins with a tab, it will be considered a
+recipe line.  Whitespace is required between 'include' and the file
+names, and between file names; extra whitespace is ignored there and at
+the end of the directive.  A comment starting with '#' is allowed at the
+end of the line.  If the file names contain any variable or function
+references, they are expanded.  *Note How to Use Variables: Using
+Variables.
+
+   For example, if you have three '.mk' files, 'a.mk', 'b.mk', and
+'c.mk', and '$(bar)' expands to 'bish bash', then the following
+expression
+
+     include foo *.mk $(bar)
+
+   is equivalent to
+
+     include foo a.mk b.mk c.mk bish bash
+
+   When 'make' processes an 'include' directive, it suspends reading of
+the containing makefile and reads from each listed file in turn.  When
+that is finished, 'make' resumes reading the makefile in which the
+directive appears.
+
+   One occasion for using 'include' directives is when several programs,
+handled by individual makefiles in various directories, need to use a
+common set of variable definitions (*note Setting Variables: Setting.)
+or pattern rules (*note Defining and Redefining Pattern Rules: Pattern
+Rules.).
+
+   Another such occasion is when you want to generate prerequisites from
+source files automatically; the prerequisites can be put in a file that
+is included by the main makefile.  This practice is generally cleaner
+than that of somehow appending the prerequisites to the end of the main
+makefile as has been traditionally done with other versions of 'make'.
+*Note Automatic Prerequisites::.
+
+   If the specified name does not start with a slash, and the file is
+not found in the current directory, several other directories are
+searched.  First, any directories you have specified with the '-I' or
+'--include-dir' option are searched (*note Summary of Options: Options
+Summary.).  Then the following directories (if they exist) are searched,
+in this order: 'PREFIX/include' (normally '/usr/local/include' (1))
+'/usr/gnu/include', '/usr/local/include', '/usr/include'.
+
+   If an included makefile cannot be found in any of these directories,
+a warning message is generated, but it is not an immediately fatal
+error; processing of the makefile containing the 'include' continues.
+Once it has finished reading makefiles, 'make' will try to remake any
+that are out of date or don't exist.  *Note How Makefiles Are Remade:
+Remaking Makefiles.  Only after it has tried to find a way to remake a
+makefile and failed, will 'make' diagnose the missing makefile as a
+fatal error.
+
+   If you want 'make' to simply ignore a makefile which does not exist
+or cannot be remade, with no error message, use the '-include' directive
+instead of 'include', like this:
+
+     -include FILENAMES...
+
+   This acts like 'include' in every way except that there is no error
+(not even a warning) if any of the FILENAMES (or any prerequisites of
+any of the FILENAMES) do not exist or cannot be remade.
+
+   For compatibility with some other 'make' implementations, 'sinclude'
+is another name for '-include'.
+
+   ---------- Footnotes ----------
+
+   (1) GNU Make compiled for MS-DOS and MS-Windows behaves as if PREFIX
+has been defined to be the root of the DJGPP tree hierarchy.
+
+
+File: make.info,  Node: MAKEFILES Variable,  Next: Remaking Makefiles,  Prev: Include,  Up: Makefiles
+
+3.4 The Variable 'MAKEFILES'
+============================
+
+If the environment variable 'MAKEFILES' is defined, 'make' considers its
+value as a list of names (separated by whitespace) of additional
+makefiles to be read before the others.  This works much like the
+'include' directive: various directories are searched for those files
+(*note Including Other Makefiles: Include.).  In addition, the default
+goal is never taken from one of these makefiles (or any makefile
+included by them) and it is not an error if the files listed in
+'MAKEFILES' are not found.
+
+   The main use of 'MAKEFILES' is in communication between recursive
+invocations of 'make' (*note Recursive Use of 'make': Recursion.).  It
+usually is not desirable to set the environment variable before a
+top-level invocation of 'make', because it is usually better not to mess
+with a makefile from outside.  However, if you are running 'make'
+without a specific makefile, a makefile in 'MAKEFILES' can do useful
+things to help the built-in implicit rules work better, such as defining
+search paths (*note Directory Search::).
+
+   Some users are tempted to set 'MAKEFILES' in the environment
+automatically on login, and program makefiles to expect this to be done.
+This is a very bad idea, because such makefiles will fail to work if run
+by anyone else.  It is much better to write explicit 'include'
+directives in the makefiles.  *Note Including Other Makefiles: Include.
+
+
+File: make.info,  Node: Remaking Makefiles,  Next: Overriding Makefiles,  Prev: MAKEFILES Variable,  Up: Makefiles
+
+3.5 How Makefiles Are Remade
+============================
+
+Sometimes makefiles can be remade from other files, such as RCS or SCCS
+files.  If a makefile can be remade from other files, you probably want
+'make' to get an up-to-date version of the makefile to read in.
+
+   To this end, after reading in all makefiles, 'make' will consider
+each as a goal target and attempt to update it.  If a makefile has a
+rule which says how to update it (found either in that very makefile or
+in another one) or if an implicit rule applies to it (*note Using
+Implicit Rules: Implicit Rules.), it will be updated if necessary.
+After all makefiles have been checked, if any have actually been
+changed, 'make' starts with a clean slate and reads all the makefiles
+over again.  (It will also attempt to update each of them over again,
+but normally this will not change them again, since they are already up
+to date.)
+
+   If you know that one or more of your makefiles cannot be remade and
+you want to keep 'make' from performing an implicit rule search on them,
+perhaps for efficiency reasons, you can use any normal method of
+preventing implicit rule look-up to do so.  For example, you can write
+an explicit rule with the makefile as the target, and an empty recipe
+(*note Using Empty Recipes: Empty Recipes.).
+
+   If the makefiles specify a double-colon rule to remake a file with a
+recipe but no prerequisites, that file will always be remade (*note
+Double-Colon::).  In the case of makefiles, a makefile that has a
+double-colon rule with a recipe but no prerequisites will be remade
+every time 'make' is run, and then again after 'make' starts over and
+reads the makefiles in again.  This would cause an infinite loop: 'make'
+would constantly remake the makefile, and never do anything else.  So,
+to avoid this, 'make' will *not* attempt to remake makefiles which are
+specified as targets of a double-colon rule with a recipe but no
+prerequisites.
+
+   If you do not specify any makefiles to be read with '-f' or '--file'
+options, 'make' will try the default makefile names; *note What Name to
+Give Your Makefile: Makefile Names.  Unlike makefiles explicitly
+requested with '-f' or '--file' options, 'make' is not certain that
+these makefiles should exist.  However, if a default makefile does not
+exist but can be created by running 'make' rules, you probably want the
+rules to be run so that the makefile can be used.
+
+   Therefore, if none of the default makefiles exists, 'make' will try
+to make each of them in the same order in which they are searched for
+(*note What Name to Give Your Makefile: Makefile Names.) until it
+succeeds in making one, or it runs out of names to try.  Note that it is
+not an error if 'make' cannot find or make any makefile; a makefile is
+not always necessary.
+
+   When you use the '-t' or '--touch' option (*note Instead of Executing
+Recipes: Instead of Execution.), you would not want to use an
+out-of-date makefile to decide which targets to touch.  So the '-t'
+option has no effect on updating makefiles; they are really updated even
+if '-t' is specified.  Likewise, '-q' (or '--question') and '-n' (or
+'--just-print') do not prevent updating of makefiles, because an
+out-of-date makefile would result in the wrong output for other targets.
+Thus, 'make -f mfile -n foo' will update 'mfile', read it in, and then
+print the recipe to update 'foo' and its prerequisites without running
+it.  The recipe printed for 'foo' will be the one specified in the
+updated contents of 'mfile'.
+
+   However, on occasion you might actually wish to prevent updating of
+even the makefiles.  You can do this by specifying the makefiles as
+goals in the command line as well as specifying them as makefiles.  When
+the makefile name is specified explicitly as a goal, the options '-t'
+and so on do apply to them.
+
+   Thus, 'make -f mfile -n mfile foo' would read the makefile 'mfile',
+print the recipe needed to update it without actually running it, and
+then print the recipe needed to update 'foo' without running that.  The
+recipe for 'foo' will be the one specified by the existing contents of
+'mfile'.
+
+
+File: make.info,  Node: Overriding Makefiles,  Next: Reading Makefiles,  Prev: Remaking Makefiles,  Up: Makefiles
+
+3.6 Overriding Part of Another Makefile
+=======================================
+
+Sometimes it is useful to have a makefile that is mostly just like
+another makefile.  You can often use the 'include' directive to include
+one in the other, and add more targets or variable definitions.
+However, it is invalid for two makefiles to give different recipes for
+the same target.  But there is another way.
+
+   In the containing makefile (the one that wants to include the other),
+you can use a match-anything pattern rule to say that to remake any
+target that cannot be made from the information in the containing
+makefile, 'make' should look in another makefile.  *Note Pattern
+Rules::, for more information on pattern rules.
+
+   For example, if you have a makefile called 'Makefile' that says how
+to make the target 'foo' (and other targets), you can write a makefile
+called 'GNUmakefile' that contains:
+
+     foo:
+             frobnicate > foo
+
+     %: force
+             @$(MAKE) -f Makefile $@
+     force: ;
+
+   If you say 'make foo', 'make' will find 'GNUmakefile', read it, and
+see that to make 'foo', it needs to run the recipe 'frobnicate > foo'.
+If you say 'make bar', 'make' will find no way to make 'bar' in
+'GNUmakefile', so it will use the recipe from the pattern rule: 'make -f
+Makefile bar'.  If 'Makefile' provides a rule for updating 'bar', 'make'
+will apply the rule.  And likewise for any other target that
+'GNUmakefile' does not say how to make.
+
+   The way this works is that the pattern rule has a pattern of just
+'%', so it matches any target whatever.  The rule specifies a
+prerequisite 'force', to guarantee that the recipe will be run even if
+the target file already exists.  We give the 'force' target an empty
+recipe to prevent 'make' from searching for an implicit rule to build
+it--otherwise it would apply the same match-anything rule to 'force'
+itself and create a prerequisite loop!
+
+
+File: make.info,  Node: Reading Makefiles,  Next: Secondary Expansion,  Prev: Overriding Makefiles,  Up: Makefiles
+
+3.7 How 'make' Reads a Makefile
+===============================
+
+GNU 'make' does its work in two distinct phases.  During the first phase
+it reads all the makefiles, included makefiles, etc.  and internalizes
+all the variables and their values, implicit and explicit rules, and
+constructs a dependency graph of all the targets and their
+prerequisites.  During the second phase, 'make' uses these internal
+structures to determine what targets will need to be rebuilt and to
+invoke the rules necessary to do so.
+
+   It's important to understand this two-phase approach because it has a
+direct impact on how variable and function expansion happens; this is
+often a source of some confusion when writing makefiles.  Here we will
+present a summary of the phases in which expansion happens for different
+constructs within the makefile.  We say that expansion is "immediate" if
+it happens during the first phase: in this case 'make' will expand any
+variables or functions in that section of a construct as the makefile is
+parsed.  We say that expansion is "deferred" if expansion is not
+performed immediately.  Expansion of a deferred construct is not
+performed until either the construct appears later in an immediate
+context, or until the second phase.
+
+   You may not be familiar with some of these constructs yet.  You can
+reference this section as you become familiar with them, in later
+chapters.
+
+Variable Assignment
+-------------------
+
+Variable definitions are parsed as follows:
+
+     IMMEDIATE = DEFERRED
+     IMMEDIATE ?= DEFERRED
+     IMMEDIATE := IMMEDIATE
+     IMMEDIATE ::= IMMEDIATE
+     IMMEDIATE += DEFERRED or IMMEDIATE
+     IMMEDIATE != IMMEDIATE
+
+     define IMMEDIATE
+       DEFERRED
+     endef
+
+     define IMMEDIATE =
+       DEFERRED
+     endef
+
+     define IMMEDIATE ?=
+       DEFERRED
+     endef
+
+     define IMMEDIATE :=
+       IMMEDIATE
+     endef
+
+     define IMMEDIATE ::=
+       IMMEDIATE
+     endef
+
+     define IMMEDIATE +=
+       DEFERRED or IMMEDIATE
+     endef
+
+     define IMMEDIATE !=
+       IMMEDIATE
+     endef
+
+   For the append operator, '+=', the right-hand side is considered
+immediate if the variable was previously set as a simple variable (':='
+or '::='), and deferred otherwise.
+
+   For the shell assignment operator, '!=', the right-hand side is
+evaluated immediately and handed to the shell.  The result is stored in
+the variable named on the left, and that variable becomes a simple
+variable (and will thus be re-evaluated on each reference).
+
+Conditional Directives
+----------------------
+
+Conditional directives are parsed immediately.  This means, for example,
+that automatic variables cannot be used in conditional directives, as
+automatic variables are not set until the recipe for that rule is
+invoked.  If you need to use automatic variables in a conditional
+directive you _must_ move the condition into the recipe and use shell
+conditional syntax instead.
+
+Rule Definition
+---------------
+
+A rule is always expanded the same way, regardless of the form:
+
+     IMMEDIATE : IMMEDIATE ; DEFERRED
+             DEFERRED
+
+   That is, the target and prerequisite sections are expanded
+immediately, and the recipe used to construct the target is always
+deferred.  This general rule is true for explicit rules, pattern rules,
+suffix rules, static pattern rules, and simple prerequisite definitions.
+
+
+File: make.info,  Node: Secondary Expansion,  Prev: Reading Makefiles,  Up: Makefiles
+
+3.8 Secondary Expansion
+=======================
+
+In the previous section we learned that GNU 'make' works in two distinct
+phases: a read-in phase and a target-update phase (*note How 'make'
+Reads a Makefile: Reading Makefiles.).  GNU make also has the ability to
+enable a _second expansion_ of the prerequisites (only) for some or all
+targets defined in the makefile.  In order for this second expansion to
+occur, the special target '.SECONDEXPANSION' must be defined before the
+first prerequisite list that makes use of this feature.
+
+   If that special target is defined then in between the two phases
+mentioned above, right at the end of the read-in phase, all the
+prerequisites of the targets defined after the special target are
+expanded a _second time_.  In most circumstances this secondary
+expansion will have no effect, since all variable and function
+references will have been expanded during the initial parsing of the
+makefiles.  In order to take advantage of the secondary expansion phase
+of the parser, then, it's necessary to _escape_ the variable or function
+reference in the makefile.  In this case the first expansion merely
+un-escapes the reference but doesn't expand it, and expansion is left to
+the secondary expansion phase.  For example, consider this makefile:
+
+     .SECONDEXPANSION:
+     ONEVAR = onefile
+     TWOVAR = twofile
+     myfile: $(ONEVAR) $$(TWOVAR)
+
+   After the first expansion phase the prerequisites list of the
+'myfile' target will be 'onefile' and '$(TWOVAR)'; the first (unescaped)
+variable reference to ONEVAR is expanded, while the second (escaped)
+variable reference is simply unescaped, without being recognized as a
+variable reference.  Now during the secondary expansion the first word
+is expanded again but since it contains no variable or function
+references it remains the value 'onefile', while the second word is now
+a normal reference to the variable TWOVAR, which is expanded to the
+value 'twofile'.  The final result is that there are two prerequisites,
+'onefile' and 'twofile'.
+
+   Obviously, this is not a very interesting case since the same result
+could more easily have been achieved simply by having both variables
+appear, unescaped, in the prerequisites list.  One difference becomes
+apparent if the variables are reset; consider this example:
+
+     .SECONDEXPANSION:
+     AVAR = top
+     onefile: $(AVAR)
+     twofile: $$(AVAR)
+     AVAR = bottom
+
+   Here the prerequisite of 'onefile' will be expanded immediately, and
+resolve to the value 'top', while the prerequisite of 'twofile' will not
+be full expanded until the secondary expansion and yield a value of
+'bottom'.
+
+   This is marginally more exciting, but the true power of this feature
+only becomes apparent when you discover that secondary expansions always
+take place within the scope of the automatic variables for that target.
+This means that you can use variables such as '$@', '$*', etc.  during
+the second expansion and they will have their expected values, just as
+in the recipe.  All you have to do is defer the expansion by escaping
+the '$'.  Also, secondary expansion occurs for both explicit and
+implicit (pattern) rules.  Knowing this, the possible uses for this
+feature increase dramatically.  For example:
+
+     .SECONDEXPANSION:
+     main_OBJS := main.o try.o test.o
+     lib_OBJS := lib.o api.o
+
+     main lib: $$($$@_OBJS)
+
+   Here, after the initial expansion the prerequisites of both the
+'main' and 'lib' targets will be '$($@_OBJS)'.  During the secondary
+expansion, the '$@' variable is set to the name of the target and so the
+expansion for the 'main' target will yield '$(main_OBJS)', or 'main.o
+try.o test.o', while the secondary expansion for the 'lib' target will
+yield '$(lib_OBJS)', or 'lib.o api.o'.
+
+   You can also mix in functions here, as long as they are properly
+escaped:
+
+     main_SRCS := main.c try.c test.c
+     lib_SRCS := lib.c api.c
+
+     .SECONDEXPANSION:
+     main lib: $$(patsubst %.c,%.o,$$($$@_SRCS))
+
+   This version allows users to specify source files rather than object
+files, but gives the same resulting prerequisites list as the previous
+example.
+
+   Evaluation of automatic variables during the secondary expansion
+phase, especially of the target name variable '$$@', behaves similarly
+to evaluation within recipes.  However, there are some subtle
+differences and "corner cases" which come into play for the different
+types of rule definitions that 'make' understands.  The subtleties of
+using the different automatic variables are described below.
+
+Secondary Expansion of Explicit Rules
+-------------------------------------
+
+During the secondary expansion of explicit rules, '$$@' and '$$%'
+evaluate, respectively, to the file name of the target and, when the
+target is an archive member, the target member name.  The '$$<' variable
+evaluates to the first prerequisite in the first rule for this target.
+'$$^' and '$$+' evaluate to the list of all prerequisites of rules _that
+have already appeared_ for the same target ('$$+' with repetitions and
+'$$^' without).  The following example will help illustrate these
+behaviors:
+
+     .SECONDEXPANSION:
+
+     foo: foo.1 bar.1 $$< $$^ $$+    # line #1
+
+     foo: foo.2 bar.2 $$< $$^ $$+    # line #2
+
+     foo: foo.3 bar.3 $$< $$^ $$+    # line #3
+
+   In the first prerequisite list, all three variables ('$$<', '$$^',
+and '$$+') expand to the empty string.  In the second, they will have
+values 'foo.1', 'foo.1 bar.1', and 'foo.1 bar.1' respectively.  In the
+third they will have values 'foo.1', 'foo.1 bar.1 foo.2 bar.2', and
+'foo.1 bar.1 foo.2 bar.2 foo.1 foo.1 bar.1 foo.1 bar.1' respectively.
+
+   Rules undergo secondary expansion in makefile order, except that the
+rule with the recipe is always evaluated last.
+
+   The variables '$$?' and '$$*' are not available and expand to the
+empty string.
+
+Secondary Expansion of Static Pattern Rules
+-------------------------------------------
+
+Rules for secondary expansion of static pattern rules are identical to
+those for explicit rules, above, with one exception: for static pattern
+rules the '$$*' variable is set to the pattern stem.  As with explicit
+rules, '$$?' is not available and expands to the empty string.
+
+Secondary Expansion of Implicit Rules
+-------------------------------------
+
+As 'make' searches for an implicit rule, it substitutes the stem and
+then performs secondary expansion for every rule with a matching target
+pattern.  The value of the automatic variables is derived in the same
+fashion as for static pattern rules.  As an example:
+
+     .SECONDEXPANSION:
+
+     foo: bar
+
+     foo foz: fo%: bo%
+
+     %oo: $$< $$^ $$+ $$*
+
+   When the implicit rule is tried for target 'foo', '$$<' expands to
+'bar', '$$^' expands to 'bar boo', '$$+' also expands to 'bar boo', and
+'$$*' expands to 'f'.
+
+   Note that the directory prefix (D), as described in *note Implicit
+Rule Search Algorithm: Implicit Rule Search, is appended (after
+expansion) to all the patterns in the prerequisites list.  As an
+example:
+
+     .SECONDEXPANSION:
+
+     /tmp/foo.o:
+
+     %.o: $$(addsuffix /%.c,foo bar) foo.h
+             @echo $^
+
+   The prerequisite list printed, after the secondary expansion and
+directory prefix reconstruction, will be '/tmp/foo/foo.c /tmp/bar/foo.c
+foo.h'.  If you are not interested in this reconstruction, you can use
+'$$*' instead of '%' in the prerequisites list.
+
+
+File: make.info,  Node: Rules,  Next: Recipes,  Prev: Makefiles,  Up: Top
+
+4 Writing Rules
+***************
+
+A "rule" appears in the makefile and says when and how to remake certain
+files, called the rule's "targets" (most often only one per rule).  It
+lists the other files that are the "prerequisites" of the target, and
+the "recipe" to use to create or update the target.
+
+   The order of rules is not significant, except for determining the
+"default goal": the target for 'make' to consider, if you do not
+otherwise specify one.  The default goal is the target of the first rule
+in the first makefile.  If the first rule has multiple targets, only the
+first target is taken as the default.  There are two exceptions: a
+target starting with a period is not a default unless it contains one or
+more slashes, '/', as well; and, a target that defines a pattern rule
+has no effect on the default goal.  (*Note Defining and Redefining
+Pattern Rules: Pattern Rules.)
+
+   Therefore, we usually write the makefile so that the first rule is
+the one for compiling the entire program or all the programs described
+by the makefile (often with a target called 'all').  *Note Arguments to
+Specify the Goals: Goals.
+
+* Menu:
+
+* Rule Example::                An example explained.
+* Rule Syntax::                 General syntax explained.
+* Prerequisite Types::          There are two types of prerequisites.
+* Wildcards::                   Using wildcard characters such as '*'.
+* Directory Search::            Searching other directories for source files.
+* Phony Targets::               Using a target that is not a real file's name.
+* Force Targets::               You can use a target without a recipe
+                                  or prerequisites to mark other targets
+                                  as phony.
+* Empty Targets::               When only the date matters and the
+                                  files are empty.
+* Special Targets::             Targets with special built-in meanings.
+* Multiple Targets::            When to make use of several targets in a rule.
+* Multiple Rules::              How to use several rules with the same target.
+* Static Pattern::              Static pattern rules apply to multiple targets
+                                  and can vary the prerequisites according to
+                                  the target name.
+* Double-Colon::                How to use a special kind of rule to allow
+                                  several independent rules for one target.
+* Automatic Prerequisites::     How to automatically generate rules giving
+                                  prerequisites from source files themselves.
+
+
+File: make.info,  Node: Rule Example,  Next: Rule Syntax,  Prev: Rules,  Up: Rules
+
+4.1 Rule Example
+================
+
+Here is an example of a rule:
+
+     foo.o : foo.c defs.h       # module for twiddling the frobs
+             cc -c -g foo.c
+
+   Its target is 'foo.o' and its prerequisites are 'foo.c' and 'defs.h'.
+It has one command in the recipe: 'cc -c -g foo.c'.  The recipe starts
+with a tab to identify it as a recipe.
+
+   This rule says two things:
+
+   * How to decide whether 'foo.o' is out of date: it is out of date if
+     it does not exist, or if either 'foo.c' or 'defs.h' is more recent
+     than it.
+
+   * How to update the file 'foo.o': by running 'cc' as stated.  The
+     recipe does not explicitly mention 'defs.h', but we presume that
+     'foo.c' includes it, and that that is why 'defs.h' was added to the
+     prerequisites.
+
+
+File: make.info,  Node: Rule Syntax,  Next: Prerequisite Types,  Prev: Rule Example,  Up: Rules
+
+4.2 Rule Syntax
+===============
+
+In general, a rule looks like this:
+
+     TARGETS : PREREQUISITES
+             RECIPE
+             ...
+
+or like this:
+
+     TARGETS : PREREQUISITES ; RECIPE
+             RECIPE
+             ...
+
+   The TARGETS are file names, separated by spaces.  Wildcard characters
+may be used (*note Using Wildcard Characters in File Names: Wildcards.)
+and a name of the form 'A(M)' represents member M in archive file A
+(*note Archive Members as Targets: Archive Members.).  Usually there is
+only one target per rule, but occasionally there is a reason to have
+more (*note Multiple Targets in a Rule: Multiple Targets.).
+
+   The RECIPE lines start with a tab character (or the first character
+in the value of the '.RECIPEPREFIX' variable; *note Special
+Variables::).  The first recipe line may appear on the line after the
+prerequisites, with a tab character, or may appear on the same line,
+with a semicolon.  Either way, the effect is the same.  There are other
+differences in the syntax of recipes.  *Note Writing Recipes in Rules:
+Recipes.
+
+   Because dollar signs are used to start 'make' variable references, if
+you really want a dollar sign in a target or prerequisite you must write
+two of them, '$$' (*note How to Use Variables: Using Variables.).  If
+you have enabled secondary expansion (*note Secondary Expansion::) and
+you want a literal dollar sign in the prerequisites list, you must
+actually write _four_ dollar signs ('$$$$').
+
+   You may split a long line by inserting a backslash followed by a
+newline, but this is not required, as 'make' places no limit on the
+length of a line in a makefile.
+
+   A rule tells 'make' two things: when the targets are out of date, and
+how to update them when necessary.
+
+   The criterion for being out of date is specified in terms of the
+PREREQUISITES, which consist of file names separated by spaces.
+(Wildcards and archive members (*note Archives::) are allowed here too.)
+A target is out of date if it does not exist or if it is older than any
+of the prerequisites (by comparison of last-modification times).  The
+idea is that the contents of the target file are computed based on
+information in the prerequisites, so if any of the prerequisites
+changes, the contents of the existing target file are no longer
+necessarily valid.
+
+   How to update is specified by a RECIPE.  This is one or more lines to
+be executed by the shell (normally 'sh'), but with some extra features
+(*note Writing Recipes in Rules: Recipes.).
+
+
+File: make.info,  Node: Prerequisite Types,  Next: Wildcards,  Prev: Rule Syntax,  Up: Rules
+
+4.3 Types of Prerequisites
+==========================
+
+There are actually two different types of prerequisites understood by
+GNU 'make': normal prerequisites such as described in the previous
+section, and "order-only" prerequisites.  A normal prerequisite makes
+two statements: first, it imposes an order in which recipes will be
+invoked: the recipes for all prerequisites of a target will be completed
+before the recipe for the target is run.  Second, it imposes a
+dependency relationship: if any prerequisite is newer than the target,
+then the target is considered out-of-date and must be rebuilt.
+
+   Normally, this is exactly what you want: if a target's prerequisite
+is updated, then the target should also be updated.
+
+   Occasionally, however, you have a situation where you want to impose
+a specific ordering on the rules to be invoked _without_ forcing the
+target to be updated if one of those rules is executed.  In that case,
+you want to define "order-only" prerequisites.  Order-only prerequisites
+can be specified by placing a pipe symbol ('|') in the prerequisites
+list: any prerequisites to the left of the pipe symbol are normal; any
+prerequisites to the right are order-only:
+
+     TARGETS : NORMAL-PREREQUISITES | ORDER-ONLY-PREREQUISITES
+
+   The normal prerequisites section may of course be empty.  Also, you
+may still declare multiple lines of prerequisites for the same target:
+they are appended appropriately (normal prerequisites are appended to
+the list of normal prerequisites; order-only prerequisites are appended
+to the list of order-only prerequisites).  Note that if you declare the
+same file to be both a normal and an order-only prerequisite, the normal
+prerequisite takes precedence (since they have a strict superset of the
+behavior of an order-only prerequisite).
+
+   Consider an example where your targets are to be placed in a separate
+directory, and that directory might not exist before 'make' is run.  In
+this situation, you want the directory to be created before any targets
+are placed into it but, because the timestamps on directories change
+whenever a file is added, removed, or renamed, we certainly don't want
+to rebuild all the targets whenever the directory's timestamp changes.
+One way to manage this is with order-only prerequisites: make the
+directory an order-only prerequisite on all the targets:
+
+     OBJDIR := objdir
+     OBJS := $(addprefix $(OBJDIR)/,foo.o bar.o baz.o)
+
+     $(OBJDIR)/%.o : %.c
+             $(COMPILE.c) $(OUTPUT_OPTION) $<
+
+     all: $(OBJS)
+
+     $(OBJS): | $(OBJDIR)
+
+     $(OBJDIR):
+             mkdir $(OBJDIR)
+
+   Now the rule to create the 'objdir' directory will be run, if needed,
+before any '.o' is built, but no '.o' will be built because the 'objdir'
+directory timestamp changed.
+
+
+File: make.info,  Node: Wildcards,  Next: Directory Search,  Prev: Prerequisite Types,  Up: Rules
+
+4.4 Using Wildcard Characters in File Names
+===========================================
+
+A single file name can specify many files using "wildcard characters".
+The wildcard characters in 'make' are '*', '?' and '[...]', the same as
+in the Bourne shell.  For example, '*.c' specifies a list of all the
+files (in the working directory) whose names end in '.c'.
+
+   The character '~' at the beginning of a file name also has special
+significance.  If alone, or followed by a slash, it represents your home
+directory.  For example '~/bin' expands to '/home/you/bin'.  If the '~'
+is followed by a word, the string represents the home directory of the
+user named by that word.  For example '~john/bin' expands to
+'/home/john/bin'.  On systems which don't have a home directory for each
+user (such as MS-DOS or MS-Windows), this functionality can be simulated
+by setting the environment variable HOME.
+
+   Wildcard expansion is performed by 'make' automatically in targets
+and in prerequisites.  In recipes, the shell is responsible for wildcard
+expansion.  In other contexts, wildcard expansion happens only if you
+request it explicitly with the 'wildcard' function.
+
+   The special significance of a wildcard character can be turned off by
+preceding it with a backslash.  Thus, 'foo\*bar' would refer to a
+specific file whose name consists of 'foo', an asterisk, and 'bar'.
+
+* Menu:
+
+* Wildcard Examples::           Several examples.
+* Wildcard Pitfall::            Problems to avoid.
+* Wildcard Function::           How to cause wildcard expansion where
+                                  it does not normally take place.
+
+
+File: make.info,  Node: Wildcard Examples,  Next: Wildcard Pitfall,  Prev: Wildcards,  Up: Wildcards
+
+4.4.1 Wildcard Examples
+-----------------------
+
+Wildcards can be used in the recipe of a rule, where they are expanded
+by the shell.  For example, here is a rule to delete all the object
+files:
+
+     clean:
+             rm -f *.o
+
+   Wildcards are also useful in the prerequisites of a rule.  With the
+following rule in the makefile, 'make print' will print all the '.c'
+files that have changed since the last time you printed them:
+
+     print: *.c
+             lpr -p $?
+             touch print
+
+This rule uses 'print' as an empty target file; see *note Empty Target
+Files to Record Events: Empty Targets.  (The automatic variable '$?' is
+used to print only those files that have changed; see *note Automatic
+Variables::.)
+
+   Wildcard expansion does not happen when you define a variable.  Thus,
+if you write this:
+
+     objects = *.o
+
+then the value of the variable 'objects' is the actual string '*.o'.
+However, if you use the value of 'objects' in a target or prerequisite,
+wildcard expansion will take place there.  If you use the value of
+'objects' in a recipe, the shell may perform wildcard expansion when the
+recipe runs.  To set 'objects' to the expansion, instead use:
+
+     objects := $(wildcard *.o)
+
+*Note Wildcard Function::.
+
+
+File: make.info,  Node: Wildcard Pitfall,  Next: Wildcard Function,  Prev: Wildcard Examples,  Up: Wildcards
+
+4.4.2 Pitfalls of Using Wildcards
+---------------------------------
+
+Now here is an example of a naive way of using wildcard expansion, that
+does not do what you would intend.  Suppose you would like to say that
+the executable file 'foo' is made from all the object files in the
+directory, and you write this:
+
+     objects = *.o
+
+     foo : $(objects)
+             cc -o foo $(CFLAGS) $(objects)
+
+The value of 'objects' is the actual string '*.o'.  Wildcard expansion
+happens in the rule for 'foo', so that each _existing_ '.o' file becomes
+a prerequisite of 'foo' and will be recompiled if necessary.
+
+   But what if you delete all the '.o' files?  When a wildcard matches
+no files, it is left as it is, so then 'foo' will depend on the
+oddly-named file '*.o'.  Since no such file is likely to exist, 'make'
+will give you an error saying it cannot figure out how to make '*.o'.
+This is not what you want!
+
+   Actually it is possible to obtain the desired result with wildcard
+expansion, but you need more sophisticated techniques, including the
+'wildcard' function and string substitution.  *Note The Function
+'wildcard': Wildcard Function.
+
+   Microsoft operating systems (MS-DOS and MS-Windows) use backslashes
+to separate directories in pathnames, like so:
+
+       c:\foo\bar\baz.c
+
+   This is equivalent to the Unix-style 'c:/foo/bar/baz.c' (the 'c:'
+part is the so-called drive letter).  When 'make' runs on these systems,
+it supports backslashes as well as the Unix-style forward slashes in
+pathnames.  However, this support does _not_ include the wildcard
+expansion, where backslash is a quote character.  Therefore, you _must_
+use Unix-style slashes in these cases.
+
+
+File: make.info,  Node: Wildcard Function,  Prev: Wildcard Pitfall,  Up: Wildcards
+
+4.4.3 The Function 'wildcard'
+-----------------------------
+
+Wildcard expansion happens automatically in rules.  But wildcard
+expansion does not normally take place when a variable is set, or inside
+the arguments of a function.  If you want to do wildcard expansion in
+such places, you need to use the 'wildcard' function, like this:
+
+     $(wildcard PATTERN...)
+
+This string, used anywhere in a makefile, is replaced by a
+space-separated list of names of existing files that match one of the
+given file name patterns.  If no existing file name matches a pattern,
+then that pattern is omitted from the output of the 'wildcard' function.
+Note that this is different from how unmatched wildcards behave in
+rules, where they are used verbatim rather than ignored (*note Wildcard
+Pitfall::).
+
+   One use of the 'wildcard' function is to get a list of all the C
+source files in a directory, like this:
+
+     $(wildcard *.c)
+
+   We can change the list of C source files into a list of object files
+by replacing the '.c' suffix with '.o' in the result, like this:
+
+     $(patsubst %.c,%.o,$(wildcard *.c))
+
+(Here we have used another function, 'patsubst'.  *Note Functions for
+String Substitution and Analysis: Text Functions.)
+
+   Thus, a makefile to compile all C source files in the directory and
+then link them together could be written as follows:
+
+     objects := $(patsubst %.c,%.o,$(wildcard *.c))
+
+     foo : $(objects)
+             cc -o foo $(objects)
+
+(This takes advantage of the implicit rule for compiling C programs, so
+there is no need to write explicit rules for compiling the files.  *Note
+The Two Flavors of Variables: Flavors, for an explanation of ':=', which
+is a variant of '='.)
+
+
+File: make.info,  Node: Directory Search,  Next: Phony Targets,  Prev: Wildcards,  Up: Rules
+
+4.5 Searching Directories for Prerequisites
+===========================================
+
+For large systems, it is often desirable to put sources in a separate
+directory from the binaries.  The "directory search" features of 'make'
+facilitate this by searching several directories automatically to find a
+prerequisite.  When you redistribute the files among directories, you do
+not need to change the individual rules, just the search paths.
+
+* Menu:
+
+* General Search::              Specifying a search path that applies
+                                  to every prerequisite.
+* Selective Search::            Specifying a search path
+                                  for a specified class of names.
+* Search Algorithm::            When and how search paths are applied.
+* Recipes/Search::              How to write recipes that work together
+                                  with search paths.
+* Implicit/Search::             How search paths affect implicit rules.
+* Libraries/Search::            Directory search for link libraries.
+
+
+File: make.info,  Node: General Search,  Next: Selective Search,  Prev: Directory Search,  Up: Directory Search
+
+4.5.1 'VPATH': Search Path for All Prerequisites
+------------------------------------------------
+
+The value of the 'make' variable 'VPATH' specifies a list of directories
+that 'make' should search.  Most often, the directories are expected to
+contain prerequisite files that are not in the current directory;
+however, 'make' uses 'VPATH' as a search list for both prerequisites and
+targets of rules.
+
+   Thus, if a file that is listed as a target or prerequisite does not
+exist in the current directory, 'make' searches the directories listed
+in 'VPATH' for a file with that name.  If a file is found in one of
+them, that file may become the prerequisite (see below).  Rules may then
+specify the names of files in the prerequisite list as if they all
+existed in the current directory.  *Note Writing Recipes with Directory
+Search: Recipes/Search.
+
+   In the 'VPATH' variable, directory names are separated by colons or
+blanks.  The order in which directories are listed is the order followed
+by 'make' in its search.  (On MS-DOS and MS-Windows, semi-colons are
+used as separators of directory names in 'VPATH', since the colon can be
+used in the pathname itself, after the drive letter.)
+
+   For example,
+
+     VPATH = src:../headers
+
+specifies a path containing two directories, 'src' and '../headers',
+which 'make' searches in that order.
+
+   With this value of 'VPATH', the following rule,
+
+     foo.o : foo.c
+
+is interpreted as if it were written like this:
+
+     foo.o : src/foo.c
+
+assuming the file 'foo.c' does not exist in the current directory but is
+found in the directory 'src'.
+
+
+File: make.info,  Node: Selective Search,  Next: Search Algorithm,  Prev: General Search,  Up: Directory Search
+
+4.5.2 The 'vpath' Directive
+---------------------------
+
+Similar to the 'VPATH' variable, but more selective, is the 'vpath'
+directive (note lower case), which allows you to specify a search path
+for a particular class of file names: those that match a particular
+pattern.  Thus you can supply certain search directories for one class
+of file names and other directories (or none) for other file names.
+
+   There are three forms of the 'vpath' directive:
+
+'vpath PATTERN DIRECTORIES'
+     Specify the search path DIRECTORIES for file names that match
+     PATTERN.
+
+     The search path, DIRECTORIES, is a list of directories to be
+     searched, separated by colons (semi-colons on MS-DOS and
+     MS-Windows) or blanks, just like the search path used in the
+     'VPATH' variable.
+
+'vpath PATTERN'
+     Clear out the search path associated with PATTERN.
+
+'vpath'
+
+     Clear all search paths previously specified with 'vpath'
+     directives.
+
+   A 'vpath' pattern is a string containing a '%' character.  The string
+must match the file name of a prerequisite that is being searched for,
+the '%' character matching any sequence of zero or more characters (as
+in pattern rules; *note Defining and Redefining Pattern Rules: Pattern
+Rules.).  For example, '%.h' matches files that end in '.h'.  (If there
+is no '%', the pattern must match the prerequisite exactly, which is not
+useful very often.)
+
+   '%' characters in a 'vpath' directive's pattern can be quoted with
+preceding backslashes ('\').  Backslashes that would otherwise quote '%'
+characters can be quoted with more backslashes.  Backslashes that quote
+'%' characters or other backslashes are removed from the pattern before
+it is compared to file names.  Backslashes that are not in danger of
+quoting '%' characters go unmolested.
+
+   When a prerequisite fails to exist in the current directory, if the
+PATTERN in a 'vpath' directive matches the name of the prerequisite
+file, then the DIRECTORIES in that directive are searched just like (and
+before) the directories in the 'VPATH' variable.
+
+   For example,
+
+     vpath %.h ../headers
+
+tells 'make' to look for any prerequisite whose name ends in '.h' in the
+directory '../headers' if the file is not found in the current
+directory.
+
+   If several 'vpath' patterns match the prerequisite file's name, then
+'make' processes each matching 'vpath' directive one by one, searching
+all the directories mentioned in each directive.  'make' handles
+multiple 'vpath' directives in the order in which they appear in the
+makefile; multiple directives with the same pattern are independent of
+each other.
+
+   Thus,
+
+     vpath %.c foo
+     vpath %   blish
+     vpath %.c bar
+
+will look for a file ending in '.c' in 'foo', then 'blish', then 'bar',
+while
+
+     vpath %.c foo:bar
+     vpath %   blish
+
+will look for a file ending in '.c' in 'foo', then 'bar', then 'blish'.
+
+
+File: make.info,  Node: Search Algorithm,  Next: Recipes/Search,  Prev: Selective Search,  Up: Directory Search
+
+4.5.3 How Directory Searches are Performed
+------------------------------------------
+
+When a prerequisite is found through directory search, regardless of
+type (general or selective), the pathname located may not be the one
+that 'make' actually provides you in the prerequisite list.  Sometimes
+the path discovered through directory search is thrown away.
+
+   The algorithm 'make' uses to decide whether to keep or abandon a path
+found via directory search is as follows:
+
+  1. If a target file does not exist at the path specified in the
+     makefile, directory search is performed.
+
+  2. If the directory search is successful, that path is kept and this
+     file is tentatively stored as the target.
+
+  3. All prerequisites of this target are examined using this same
+     method.
+
+  4. After processing the prerequisites, the target may or may not need
+     to be rebuilt:
+
+       a. If the target does _not_ need to be rebuilt, the path to the
+          file found during directory search is used for any
+          prerequisite lists which contain this target.  In short, if
+          'make' doesn't need to rebuild the target then you use the
+          path found via directory search.
+
+       b. If the target _does_ need to be rebuilt (is out-of-date), the
+          pathname found during directory search is _thrown away_, and
+          the target is rebuilt using the file name specified in the
+          makefile.  In short, if 'make' must rebuild, then the target
+          is rebuilt locally, not in the directory found via directory
+          search.
+
+   This algorithm may seem complex, but in practice it is quite often
+exactly what you want.
+
+   Other versions of 'make' use a simpler algorithm: if the file does
+not exist, and it is found via directory search, then that pathname is
+always used whether or not the target needs to be built.  Thus, if the
+target is rebuilt it is created at the pathname discovered during
+directory search.
+
+   If, in fact, this is the behavior you want for some or all of your
+directories, you can use the 'GPATH' variable to indicate this to
+'make'.
+
+   'GPATH' has the same syntax and format as 'VPATH' (that is, a space-
+or colon-delimited list of pathnames).  If an out-of-date target is
+found by directory search in a directory that also appears in 'GPATH',
+then that pathname is not thrown away.  The target is rebuilt using the
+expanded path.
+
+
+File: make.info,  Node: Recipes/Search,  Next: Implicit/Search,  Prev: Search Algorithm,  Up: Directory Search
+
+4.5.4 Writing Recipes with Directory Search
+-------------------------------------------
+
+When a prerequisite is found in another directory through directory
+search, this cannot change the recipe of the rule; they will execute as
+written.  Therefore, you must write the recipe with care so that it will
+look for the prerequisite in the directory where 'make' finds it.
+
+   This is done with the "automatic variables" such as '$^' (*note
+Automatic Variables::).  For instance, the value of '$^' is a list of
+all the prerequisites of the rule, including the names of the
+directories in which they were found, and the value of '$@' is the
+target.  Thus:
+
+     foo.o : foo.c
+             cc -c $(CFLAGS) $^ -o $@
+
+(The variable 'CFLAGS' exists so you can specify flags for C compilation
+by implicit rules; we use it here for consistency so it will affect all
+C compilations uniformly; *note Variables Used by Implicit Rules:
+Implicit Variables.)
+
+   Often the prerequisites include header files as well, which you do
+not want to mention in the recipe.  The automatic variable '$<' is just
+the first prerequisite:
+
+     VPATH = src:../headers
+     foo.o : foo.c defs.h hack.h
+             cc -c $(CFLAGS) $< -o $@
+
+
+File: make.info,  Node: Implicit/Search,  Next: Libraries/Search,  Prev: Recipes/Search,  Up: Directory Search
+
+4.5.5 Directory Search and Implicit Rules
+-----------------------------------------
+
+The search through the directories specified in 'VPATH' or with 'vpath'
+also happens during consideration of implicit rules (*note Using
+Implicit Rules: Implicit Rules.).
+
+   For example, when a file 'foo.o' has no explicit rule, 'make'
+considers implicit rules, such as the built-in rule to compile 'foo.c'
+if that file exists.  If such a file is lacking in the current
+directory, the appropriate directories are searched for it.  If 'foo.c'
+exists (or is mentioned in the makefile) in any of the directories, the
+implicit rule for C compilation is applied.
+
+   The recipes of implicit rules normally use automatic variables as a
+matter of necessity; consequently they will use the file names found by
+directory search with no extra effort.
+
+
+File: make.info,  Node: Libraries/Search,  Prev: Implicit/Search,  Up: Directory Search
+
+4.5.6 Directory Search for Link Libraries
+-----------------------------------------
+
+Directory search applies in a special way to libraries used with the
+linker.  This special feature comes into play when you write a
+prerequisite whose name is of the form '-lNAME'.  (You can tell
+something strange is going on here because the prerequisite is normally
+the name of a file, and the _file name_ of a library generally looks
+like 'libNAME.a', not like '-lNAME'.)
+
+   When a prerequisite's name has the form '-lNAME', 'make' handles it
+specially by searching for the file 'libNAME.so', and, if it is not
+found, for the file 'libNAME.a' in the current directory, in directories
+specified by matching 'vpath' search paths and the 'VPATH' search path,
+and then in the directories '/lib', '/usr/lib', and 'PREFIX/lib'
+(normally '/usr/local/lib', but MS-DOS/MS-Windows versions of 'make'
+behave as if PREFIX is defined to be the root of the DJGPP installation
+tree).
+
+   For example, if there is a '/usr/lib/libcurses.a' library on your
+system (and no '/usr/lib/libcurses.so' file), then
+
+     foo : foo.c -lcurses
+             cc $^ -o $@
+
+would cause the command 'cc foo.c /usr/lib/libcurses.a -o foo' to be
+executed when 'foo' is older than 'foo.c' or than
+'/usr/lib/libcurses.a'.
+
+   Although the default set of files to be searched for is 'libNAME.so'
+and 'libNAME.a', this is customizable via the '.LIBPATTERNS' variable.
+Each word in the value of this variable is a pattern string.  When a
+prerequisite like '-lNAME' is seen, 'make' will replace the percent in
+each pattern in the list with NAME and perform the above directory
+searches using each library file name.
+
+   The default value for '.LIBPATTERNS' is 'lib%.so lib%.a', which
+provides the default behavior described above.
+
+   You can turn off link library expansion completely by setting this
+variable to an empty value.
+
+
+File: make.info,  Node: Phony Targets,  Next: Force Targets,  Prev: Directory Search,  Up: Rules
+
+4.6 Phony Targets
+=================
+
+A phony target is one that is not really the name of a file; rather it
+is just a name for a recipe to be executed when you make an explicit
+request.  There are two reasons to use a phony target: to avoid a
+conflict with a file of the same name, and to improve performance.
+
+   If you write a rule whose recipe will not create the target file, the
+recipe will be executed every time the target comes up for remaking.
+Here is an example:
+
+     clean:
+             rm *.o temp
+
+Because the 'rm' command does not create a file named 'clean', probably
+no such file will ever exist.  Therefore, the 'rm' command will be
+executed every time you say 'make clean'.
+
+   In this example, the 'clean' target will not work properly if a file
+named 'clean' is ever created in this directory.  Since it has no
+prerequisites, 'clean' would always be considered up to date and its
+recipe would not be executed.  To avoid this problem you can explicitly
+declare the target to be phony by making it a prerequisite of the
+special target '.PHONY' (*note Special Built-in Target Names: Special
+Targets.) as follows:
+
+     .PHONY: clean
+     clean:
+             rm *.o temp
+
+Once this is done, 'make clean' will run the recipe regardless of
+whether there is a file named 'clean'.
+
+   Phony targets are also useful in conjunction with recursive
+invocations of 'make' (*note Recursive Use of 'make': Recursion.).  In
+this situation the makefile will often contain a variable which lists a
+number of sub-directories to be built.  A simplistic way to handle this
+is to define one rule with a recipe that loops over the sub-directories,
+like this:
+
+     SUBDIRS = foo bar baz
+
+     subdirs:
+             for dir in $(SUBDIRS); do \
+               $(MAKE) -C $$dir; \
+             done
+
+   There are problems with this method, however.  First, any error
+detected in a sub-make is ignored by this rule, so it will continue to
+build the rest of the directories even when one fails.  This can be
+overcome by adding shell commands to note the error and exit, but then
+it will do so even if 'make' is invoked with the '-k' option, which is
+unfortunate.  Second, and perhaps more importantly, you cannot take
+advantage of 'make''s ability to build targets in parallel (*note
+Parallel Execution: Parallel.), since there is only one rule.
+
+   By declaring the sub-directories as '.PHONY' targets (you must do
+this as the sub-directory obviously always exists; otherwise it won't be
+built) you can remove these problems:
+
+     SUBDIRS = foo bar baz
+
+     .PHONY: subdirs $(SUBDIRS)
+
+     subdirs: $(SUBDIRS)
+
+     $(SUBDIRS):
+             $(MAKE) -C $@
+
+     foo: baz
+
+   Here we've also declared that the 'foo' sub-directory cannot be built
+until after the 'baz' sub-directory is complete; this kind of
+relationship declaration is particularly important when attempting
+parallel builds.
+
+   The implicit rule search (*note Implicit Rules::) is skipped for
+'.PHONY' targets.  This is why declaring a target as '.PHONY' is good
+for performance, even if you are not worried about the actual file
+existing.
+
+   A phony target should not be a prerequisite of a real target file; if
+it is, its recipe will be run every time 'make' goes to update that
+file.  As long as a phony target is never a prerequisite of a real
+target, the phony target recipe will be executed only when the phony
+target is a specified goal (*note Arguments to Specify the Goals:
+Goals.).
+
+   Phony targets can have prerequisites.  When one directory contains
+multiple programs, it is most convenient to describe all of the programs
+in one makefile './Makefile'.  Since the target remade by default will
+be the first one in the makefile, it is common to make this a phony
+target named 'all' and give it, as prerequisites, all the individual
+programs.  For example:
+
+     all : prog1 prog2 prog3
+     .PHONY : all
+
+     prog1 : prog1.o utils.o
+             cc -o prog1 prog1.o utils.o
+
+     prog2 : prog2.o
+             cc -o prog2 prog2.o
+
+     prog3 : prog3.o sort.o utils.o
+             cc -o prog3 prog3.o sort.o utils.o
+
+Now you can say just 'make' to remake all three programs, or specify as
+arguments the ones to remake (as in 'make prog1 prog3').  Phoniness is
+not inherited: the prerequisites of a phony target are not themselves
+phony, unless explicitly declared to be so.
+
+   When one phony target is a prerequisite of another, it serves as a
+subroutine of the other.  For example, here 'make cleanall' will delete
+the object files, the difference files, and the file 'program':
+
+     .PHONY: cleanall cleanobj cleandiff
+
+     cleanall : cleanobj cleandiff
+             rm program
+
+     cleanobj :
+             rm *.o
+
+     cleandiff :
+             rm *.diff
+
+
+File: make.info,  Node: Force Targets,  Next: Empty Targets,  Prev: Phony Targets,  Up: Rules
+
+4.7 Rules without Recipes or Prerequisites
+==========================================
+
+If a rule has no prerequisites or recipe, and the target of the rule is
+a nonexistent file, then 'make' imagines this target to have been
+updated whenever its rule is run.  This implies that all targets
+depending on this one will always have their recipe run.
+
+   An example will illustrate this:
+
+     clean: FORCE
+             rm $(objects)
+     FORCE:
+
+   Here the target 'FORCE' satisfies the special conditions, so the
+target 'clean' that depends on it is forced to run its recipe.  There is
+nothing special about the name 'FORCE', but that is one name commonly
+used this way.
+
+   As you can see, using 'FORCE' this way has the same results as using
+'.PHONY: clean'.
+
+   Using '.PHONY' is more explicit and more efficient.  However, other
+versions of 'make' do not support '.PHONY'; thus 'FORCE' appears in many
+makefiles.  *Note Phony Targets::.
+
+
+File: make.info,  Node: Empty Targets,  Next: Special Targets,  Prev: Force Targets,  Up: Rules
+
+4.8 Empty Target Files to Record Events
+=======================================
+
+The "empty target" is a variant of the phony target; it is used to hold
+recipes for an action that you request explicitly from time to time.
+Unlike a phony target, this target file can really exist; but the file's
+contents do not matter, and usually are empty.
+
+   The purpose of the empty target file is to record, with its
+last-modification time, when the rule's recipe was last executed.  It
+does so because one of the commands in the recipe is a 'touch' command
+to update the target file.
+
+   The empty target file should have some prerequisites (otherwise it
+doesn't make sense).  When you ask to remake the empty target, the
+recipe is executed if any prerequisite is more recent than the target;
+in other words, if a prerequisite has changed since the last time you
+remade the target.  Here is an example:
+
+     print: foo.c bar.c
+             lpr -p $?
+             touch print
+
+With this rule, 'make print' will execute the 'lpr' command if either
+source file has changed since the last 'make print'.  The automatic
+variable '$?' is used to print only those files that have changed (*note
+Automatic Variables::).
+
+
+File: make.info,  Node: Special Targets,  Next: Multiple Targets,  Prev: Empty Targets,  Up: Rules
+
+4.9 Special Built-in Target Names
+=================================
+
+Certain names have special meanings if they appear as targets.
+
+'.PHONY'
+
+     The prerequisites of the special target '.PHONY' are considered to
+     be phony targets.  When it is time to consider such a target,
+     'make' will run its recipe unconditionally, regardless of whether a
+     file with that name exists or what its last-modification time is.
+     *Note Phony Targets: Phony Targets.
+
+'.SUFFIXES'
+
+     The prerequisites of the special target '.SUFFIXES' are the list of
+     suffixes to be used in checking for suffix rules.  *Note
+     Old-Fashioned Suffix Rules: Suffix Rules.
+
+'.DEFAULT'
+
+     The recipe specified for '.DEFAULT' is used for any target for
+     which no rules are found (either explicit rules or implicit rules).
+     *Note Last Resort::.  If a '.DEFAULT' recipe is specified, every
+     file mentioned as a prerequisite, but not as a target in a rule,
+     will have that recipe executed on its behalf.  *Note Implicit Rule
+     Search Algorithm: Implicit Rule Search.
+
+'.PRECIOUS'
+
+     The targets which '.PRECIOUS' depends on are given the following
+     special treatment: if 'make' is killed or interrupted during the
+     execution of their recipes, the target is not deleted.  *Note
+     Interrupting or Killing 'make': Interrupts.  Also, if the target is
+     an intermediate file, it will not be deleted after it is no longer
+     needed, as is normally done.  *Note Chains of Implicit Rules:
+     Chained Rules.  In this latter respect it overlaps with the
+     '.SECONDARY' special target.
+
+     You can also list the target pattern of an implicit rule (such as
+     '%.o') as a prerequisite file of the special target '.PRECIOUS' to
+     preserve intermediate files created by rules whose target patterns
+     match that file's name.
+
+'.INTERMEDIATE'
+
+     The targets which '.INTERMEDIATE' depends on are treated as
+     intermediate files.  *Note Chains of Implicit Rules: Chained Rules.
+     '.INTERMEDIATE' with no prerequisites has no effect.
+
+'.SECONDARY'
+
+     The targets which '.SECONDARY' depends on are treated as
+     intermediate files, except that they are never automatically
+     deleted.  *Note Chains of Implicit Rules: Chained Rules.
+
+     '.SECONDARY' with no prerequisites causes all targets to be treated
+     as secondary (i.e., no target is removed because it is considered
+     intermediate).
+
+'.SECONDEXPANSION'
+
+     If '.SECONDEXPANSION' is mentioned as a target anywhere in the
+     makefile, then all prerequisite lists defined _after_ it appears
+     will be expanded a second time after all makefiles have been read
+     in.  *Note Secondary Expansion: Secondary Expansion.
+
+'.DELETE_ON_ERROR'
+
+     If '.DELETE_ON_ERROR' is mentioned as a target anywhere in the
+     makefile, then 'make' will delete the target of a rule if it has
+     changed and its recipe exits with a nonzero exit status, just as it
+     does when it receives a signal.  *Note Errors in Recipes: Errors.
+
+'.IGNORE'
+
+     If you specify prerequisites for '.IGNORE', then 'make' will ignore
+     errors in execution of the recipe for those particular files.  The
+     recipe for '.IGNORE' (if any) is ignored.
+
+     If mentioned as a target with no prerequisites, '.IGNORE' says to
+     ignore errors in execution of recipes for all files.  This usage of
+     '.IGNORE' is supported only for historical compatibility.  Since
+     this affects every recipe in the makefile, it is not very useful;
+     we recommend you use the more selective ways to ignore errors in
+     specific recipes.  *Note Errors in Recipes: Errors.
+
+'.LOW_RESOLUTION_TIME'
+
+     If you specify prerequisites for '.LOW_RESOLUTION_TIME', 'make'
+     assumes that these files are created by commands that generate low
+     resolution time stamps.  The recipe for the '.LOW_RESOLUTION_TIME'
+     target are ignored.
+
+     The high resolution file time stamps of many modern file systems
+     lessen the chance of 'make' incorrectly concluding that a file is
+     up to date.  Unfortunately, some hosts do not provide a way to set
+     a high resolution file time stamp, so commands like 'cp -p' that
+     explicitly set a file's time stamp must discard its sub-second
+     part.  If a file is created by such a command, you should list it
+     as a prerequisite of '.LOW_RESOLUTION_TIME' so that 'make' does not
+     mistakenly conclude that the file is out of date.  For example:
+
+          .LOW_RESOLUTION_TIME: dst
+          dst: src
+                  cp -p src dst
+
+     Since 'cp -p' discards the sub-second part of 'src''s time stamp,
+     'dst' is typically slightly older than 'src' even when it is up to
+     date.  The '.LOW_RESOLUTION_TIME' line causes 'make' to consider
+     'dst' to be up to date if its time stamp is at the start of the
+     same second that 'src''s time stamp is in.
+
+     Due to a limitation of the archive format, archive member time
+     stamps are always low resolution.  You need not list archive
+     members as prerequisites of '.LOW_RESOLUTION_TIME', as 'make' does
+     this automatically.
+
+'.SILENT'
+
+     If you specify prerequisites for '.SILENT', then 'make' will not
+     print the recipe used to remake those particular files before
+     executing them.  The recipe for '.SILENT' is ignored.
+
+     If mentioned as a target with no prerequisites, '.SILENT' says not
+     to print any recipes before executing them.  You may also use more
+     selective ways to silence specific recipe command lines.  *Note
+     Recipe Echoing: Echoing.  If you want to silence all recipes for a
+     particular run of 'make', use the '-s' or '--silent' option (*note
+     Options Summary::).
+
+'.EXPORT_ALL_VARIABLES'
+
+     Simply by being mentioned as a target, this tells 'make' to export
+     all variables to child processes by default.  *Note Communicating
+     Variables to a Sub-'make': Variables/Recursion.
+
+'.NOTPARALLEL'
+
+     If '.NOTPARALLEL' is mentioned as a target, then this invocation of
+     'make' will be run serially, even if the '-j' option is given.  Any
+     recursively invoked 'make' command will still run recipes in
+     parallel (unless its makefile also contains this target).  Any
+     prerequisites on this target are ignored.
+
+'.ONESHELL'
+
+     If '.ONESHELL' is mentioned as a target, then when a target is
+     built all lines of the recipe will be given to a single invocation
+     of the shell rather than each line being invoked separately (*note
+     Recipe Execution: Execution.).
+
+'.POSIX'
+
+     If '.POSIX' is mentioned as a target, then the makefile will be
+     parsed and run in POSIX-conforming mode.  This does _not_ mean that
+     only POSIX-conforming makefiles will be accepted: all advanced GNU
+     'make' features are still available.  Rather, this target causes
+     'make' to behave as required by POSIX in those areas where 'make''s
+     default behavior differs.
+
+     In particular, if this target is mentioned then recipes will be
+     invoked as if the shell had been passed the '-e' flag: the first
+     failing command in a recipe will cause the recipe to fail
+     immediately.
+
+   Any defined implicit rule suffix also counts as a special target if
+it appears as a target, and so does the concatenation of two suffixes,
+such as '.c.o'.  These targets are suffix rules, an obsolete way of
+defining implicit rules (but a way still widely used).  In principle,
+any target name could be special in this way if you break it in two and
+add both pieces to the suffix list.  In practice, suffixes normally
+begin with '.', so these special target names also begin with '.'.
+*Note Old-Fashioned Suffix Rules: Suffix Rules.
+
+
+File: make.info,  Node: Multiple Targets,  Next: Multiple Rules,  Prev: Special Targets,  Up: Rules
+
+4.10 Multiple Targets in a Rule
+===============================
+
+A rule with multiple targets is equivalent to writing many rules, each
+with one target, and all identical aside from that.  The same recipe
+applies to all the targets, but its effect may vary because you can
+substitute the actual target name into the recipe using '$@'.  The rule
+contributes the same prerequisites to all the targets also.
+
+   This is useful in two cases.
+
+   * You want just prerequisites, no recipe.  For example:
+
+          kbd.o command.o files.o: command.h
+
+     gives an additional prerequisite to each of the three object files
+     mentioned.
+
+   * Similar recipes work for all the targets.  The recipes do not need
+     to be absolutely identical, since the automatic variable '$@' can
+     be used to substitute the particular target to be remade into the
+     commands (*note Automatic Variables::).  For example:
+
+          bigoutput littleoutput : text.g
+                  generate text.g -$(subst output,,$@) > $@
+
+     is equivalent to
+
+          bigoutput : text.g
+                  generate text.g -big > bigoutput
+          littleoutput : text.g
+                  generate text.g -little > littleoutput
+
+     Here we assume the hypothetical program 'generate' makes two types
+     of output, one if given '-big' and one if given '-little'.  *Note
+     Functions for String Substitution and Analysis: Text Functions, for
+     an explanation of the 'subst' function.
+
+   Suppose you would like to vary the prerequisites according to the
+target, much as the variable '$@' allows you to vary the recipe.  You
+cannot do this with multiple targets in an ordinary rule, but you can do
+it with a "static pattern rule".  *Note Static Pattern Rules: Static
+Pattern.
+
+
+File: make.info,  Node: Multiple Rules,  Next: Static Pattern,  Prev: Multiple Targets,  Up: Rules
+
+4.11 Multiple Rules for One Target
+==================================
+
+One file can be the target of several rules.  All the prerequisites
+mentioned in all the rules are merged into one list of prerequisites for
+the target.  If the target is older than any prerequisite from any rule,
+the recipe is executed.
+
+   There can only be one recipe to be executed for a file.  If more than
+one rule gives a recipe for the same file, 'make' uses the last one
+given and prints an error message.  (As a special case, if the file's
+name begins with a dot, no error message is printed.  This odd behavior
+is only for compatibility with other implementations of 'make'... you
+should avoid using it).  Occasionally it is useful to have the same
+target invoke multiple recipes which are defined in different parts of
+your makefile; you can use "double-colon rules" (*note Double-Colon::)
+for this.
+
+   An extra rule with just prerequisites can be used to give a few extra
+prerequisites to many files at once.  For example, makefiles often have
+a variable, such as 'objects', containing a list of all the compiler
+output files in the system being made.  An easy way to say that all of
+them must be recompiled if 'config.h' changes is to write the following:
+
+     objects = foo.o bar.o
+     foo.o : defs.h
+     bar.o : defs.h test.h
+     $(objects) : config.h
+
+   This could be inserted or taken out without changing the rules that
+really specify how to make the object files, making it a convenient form
+to use if you wish to add the additional prerequisite intermittently.
+
+   Another wrinkle is that the additional prerequisites could be
+specified with a variable that you set with a command line argument to
+'make' (*note Overriding Variables: Overriding.).  For example,
+
+     extradeps=
+     $(objects) : $(extradeps)
+
+means that the command 'make extradeps=foo.h' will consider 'foo.h' as a
+prerequisite of each object file, but plain 'make' will not.
+
+   If none of the explicit rules for a target has a recipe, then 'make'
+searches for an applicable implicit rule to find one *note Using
+Implicit Rules: Implicit Rules.).
+
+
+File: make.info,  Node: Static Pattern,  Next: Double-Colon,  Prev: Multiple Rules,  Up: Rules
+
+4.12 Static Pattern Rules
+=========================
+
+"Static pattern rules" are rules which specify multiple targets and
+construct the prerequisite names for each target based on the target
+name.  They are more general than ordinary rules with multiple targets
+because the targets do not have to have identical prerequisites.  Their
+prerequisites must be _analogous_, but not necessarily _identical_.
+
+* Menu:
+
+* Static Usage::                The syntax of static pattern rules.
+* Static versus Implicit::      When are they better than implicit rules?
+
+
+File: make.info,  Node: Static Usage,  Next: Static versus Implicit,  Prev: Static Pattern,  Up: Static Pattern
+
+4.12.1 Syntax of Static Pattern Rules
+-------------------------------------
+
+Here is the syntax of a static pattern rule:
+
+     TARGETS ...: TARGET-PATTERN: PREREQ-PATTERNS ...
+             RECIPE
+             ...
+
+The TARGETS list specifies the targets that the rule applies to.  The
+targets can contain wildcard characters, just like the targets of
+ordinary rules (*note Using Wildcard Characters in File Names:
+Wildcards.).
+
+   The TARGET-PATTERN and PREREQ-PATTERNS say how to compute the
+prerequisites of each target.  Each target is matched against the
+TARGET-PATTERN to extract a part of the target name, called the "stem".
+This stem is substituted into each of the PREREQ-PATTERNS to make the
+prerequisite names (one from each PREREQ-PATTERN).
+
+   Each pattern normally contains the character '%' just once.  When the
+TARGET-PATTERN matches a target, the '%' can match any part of the
+target name; this part is called the "stem".  The rest of the pattern
+must match exactly.  For example, the target 'foo.o' matches the pattern
+'%.o', with 'foo' as the stem.  The targets 'foo.c' and 'foo.out' do not
+match that pattern.
+
+   The prerequisite names for each target are made by substituting the
+stem for the '%' in each prerequisite pattern.  For example, if one
+prerequisite pattern is '%.c', then substitution of the stem 'foo' gives
+the prerequisite name 'foo.c'.  It is legitimate to write a prerequisite
+pattern that does not contain '%'; then this prerequisite is the same
+for all targets.
+
+   '%' characters in pattern rules can be quoted with preceding
+backslashes ('\').  Backslashes that would otherwise quote '%'
+characters can be quoted with more backslashes.  Backslashes that quote
+'%' characters or other backslashes are removed from the pattern before
+it is compared to file names or has a stem substituted into it.
+Backslashes that are not in danger of quoting '%' characters go
+unmolested.  For example, the pattern 'the\%weird\\%pattern\\' has
+'the%weird\' preceding the operative '%' character, and 'pattern\\'
+following it.  The final two backslashes are left alone because they
+cannot affect any '%' character.
+
+   Here is an example, which compiles each of 'foo.o' and 'bar.o' from
+the corresponding '.c' file:
+
+     objects = foo.o bar.o
+
+     all: $(objects)
+
+     $(objects): %.o: %.c
+             $(CC) -c $(CFLAGS) $< -o $@
+
+Here '$<' is the automatic variable that holds the name of the
+prerequisite and '$@' is the automatic variable that holds the name of
+the target; see *note Automatic Variables::.
+
+   Each target specified must match the target pattern; a warning is
+issued for each target that does not.  If you have a list of files, only
+some of which will match the pattern, you can use the 'filter' function
+to remove non-matching file names (*note Functions for String
+Substitution and Analysis: Text Functions.):
+
+     files = foo.elc bar.o lose.o
+
+     $(filter %.o,$(files)): %.o: %.c
+             $(CC) -c $(CFLAGS) $< -o $@
+     $(filter %.elc,$(files)): %.elc: %.el
+             emacs -f batch-byte-compile $<
+
+In this example the result of '$(filter %.o,$(files))' is 'bar.o
+lose.o', and the first static pattern rule causes each of these object
+files to be updated by compiling the corresponding C source file.  The
+result of '$(filter %.elc,$(files))' is 'foo.elc', so that file is made
+from 'foo.el'.
+
+   Another example shows how to use '$*' in static pattern rules:
+
+     bigoutput littleoutput : %output : text.g
+             generate text.g -$* > $@
+
+When the 'generate' command is run, '$*' will expand to the stem, either
+'big' or 'little'.
+
+
+File: make.info,  Node: Static versus Implicit,  Prev: Static Usage,  Up: Static Pattern
+
+4.12.2 Static Pattern Rules versus Implicit Rules
+-------------------------------------------------
+
+A static pattern rule has much in common with an implicit rule defined
+as a pattern rule (*note Defining and Redefining Pattern Rules: Pattern
+Rules.).  Both have a pattern for the target and patterns for
+constructing the names of prerequisites.  The difference is in how
+'make' decides _when_ the rule applies.
+
+   An implicit rule _can_ apply to any target that matches its pattern,
+but it _does_ apply only when the target has no recipe otherwise
+specified, and only when the prerequisites can be found.  If more than
+one implicit rule appears applicable, only one applies; the choice
+depends on the order of rules.
+
+   By contrast, a static pattern rule applies to the precise list of
+targets that you specify in the rule.  It cannot apply to any other
+target and it invariably does apply to each of the targets specified.
+If two conflicting rules apply, and both have recipes, that's an error.
+
+   The static pattern rule can be better than an implicit rule for these
+reasons:
+
+   * You may wish to override the usual implicit rule for a few files
+     whose names cannot be categorized syntactically but can be given in
+     an explicit list.
+
+   * If you cannot be sure of the precise contents of the directories
+     you are using, you may not be sure which other irrelevant files
+     might lead 'make' to use the wrong implicit rule.  The choice might
+     depend on the order in which the implicit rule search is done.
+     With static pattern rules, there is no uncertainty: each rule
+     applies to precisely the targets specified.
+
+
+File: make.info,  Node: Double-Colon,  Next: Automatic Prerequisites,  Prev: Static Pattern,  Up: Rules
+
+4.13 Double-Colon Rules
+=======================
+
+"Double-colon" rules are explicit rules written with '::' instead of ':'
+after the target names.  They are handled differently from ordinary
+rules when the same target appears in more than one rule.  Pattern rules
+with double-colons have an entirely different meaning (*note
+Match-Anything Rules::).
+
+   When a target appears in multiple rules, all the rules must be the
+same type: all ordinary, or all double-colon.  If they are double-colon,
+each of them is independent of the others.  Each double-colon rule's
+recipe is executed if the target is older than any prerequisites of that
+rule.  If there are no prerequisites for that rule, its recipe is always
+executed (even if the target already exists).  This can result in
+executing none, any, or all of the double-colon rules.
+
+   Double-colon rules with the same target are in fact completely
+separate from one another.  Each double-colon rule is processed
+individually, just as rules with different targets are processed.
+
+   The double-colon rules for a target are executed in the order they
+appear in the makefile.  However, the cases where double-colon rules
+really make sense are those where the order of executing the recipes
+would not matter.
+
+   Double-colon rules are somewhat obscure and not often very useful;
+they provide a mechanism for cases in which the method used to update a
+target differs depending on which prerequisite files caused the update,
+and such cases are rare.
+
+   Each double-colon rule should specify a recipe; if it does not, an
+implicit rule will be used if one applies.  *Note Using Implicit Rules:
+Implicit Rules.
+
+
+File: make.info,  Node: Automatic Prerequisites,  Prev: Double-Colon,  Up: Rules
+
+4.14 Generating Prerequisites Automatically
+===========================================
+
+In the makefile for a program, many of the rules you need to write often
+say only that some object file depends on some header file.  For
+example, if 'main.c' uses 'defs.h' via an '#include', you would write:
+
+     main.o: defs.h
+
+You need this rule so that 'make' knows that it must remake 'main.o'
+whenever 'defs.h' changes.  You can see that for a large program you
+would have to write dozens of such rules in your makefile.  And, you
+must always be very careful to update the makefile every time you add or
+remove an '#include'.
+
+   To avoid this hassle, most modern C compilers can write these rules
+for you, by looking at the '#include' lines in the source files.
+Usually this is done with the '-M' option to the compiler.  For example,
+the command:
+
+     cc -M main.c
+
+generates the output:
+
+     main.o : main.c defs.h
+
+Thus you no longer have to write all those rules yourself.  The compiler
+will do it for you.
+
+   Note that such a rule constitutes mentioning 'main.o' in a makefile,
+so it can never be considered an intermediate file by implicit rule
+search.  This means that 'make' won't ever remove the file after using
+it; *note Chains of Implicit Rules: Chained Rules.
+
+   With old 'make' programs, it was traditional practice to use this
+compiler feature to generate prerequisites on demand with a command like
+'make depend'.  That command would create a file 'depend' containing all
+the automatically-generated prerequisites; then the makefile could use
+'include' to read them in (*note Include::).
+
+   In GNU 'make', the feature of remaking makefiles makes this practice
+obsolete--you need never tell 'make' explicitly to regenerate the
+prerequisites, because it always regenerates any makefile that is out of
+date.  *Note Remaking Makefiles::.
+
+   The practice we recommend for automatic prerequisite generation is to
+have one makefile corresponding to each source file.  For each source
+file 'NAME.c' there is a makefile 'NAME.d' which lists what files the
+object file 'NAME.o' depends on.  That way only the source files that
+have changed need to be rescanned to produce the new prerequisites.
+
+   Here is the pattern rule to generate a file of prerequisites (i.e., a
+makefile) called 'NAME.d' from a C source file called 'NAME.c':
+
+     %.d: %.c
+             @set -e; rm -f $@; \
+              $(CC) -M $(CPPFLAGS) $< > $@.$$$$; \
+              sed 's,\($*\)\.o[ :]*,\1.o $@ : ,g' < $@.$$$$ > $@; \
+              rm -f $@.$$$$
+
+*Note Pattern Rules::, for information on defining pattern rules.  The
+'-e' flag to the shell causes it to exit immediately if the '$(CC)'
+command (or any other command) fails (exits with a nonzero status).
+
+   With the GNU C compiler, you may wish to use the '-MM' flag instead
+of '-M'.  This omits prerequisites on system header files.  *Note
+Options Controlling the Preprocessor: (gcc)Preprocessor Options, for
+details.
+
+   The purpose of the 'sed' command is to translate (for example):
+
+     main.o : main.c defs.h
+
+into:
+
+     main.o main.d : main.c defs.h
+
+This makes each '.d' file depend on all the source and header files that
+the corresponding '.o' file depends on.  'make' then knows it must
+regenerate the prerequisites whenever any of the source or header files
+changes.
+
+   Once you've defined the rule to remake the '.d' files, you then use
+the 'include' directive to read them all in.  *Note Include::.  For
+example:
+
+     sources = foo.c bar.c
+
+     include $(sources:.c=.d)
+
+(This example uses a substitution variable reference to translate the
+list of source files 'foo.c bar.c' into a list of prerequisite
+makefiles, 'foo.d bar.d'.  *Note Substitution Refs::, for full
+information on substitution references.)  Since the '.d' files are
+makefiles like any others, 'make' will remake them as necessary with no
+further work from you.  *Note Remaking Makefiles::.
+
+   Note that the '.d' files contain target definitions; you should be
+sure to place the 'include' directive _after_ the first, default goal in
+your makefiles or run the risk of having a random object file become the
+default goal.  *Note How Make Works::.
+
+
+File: make.info,  Node: Recipes,  Next: Using Variables,  Prev: Rules,  Up: Top
+
+5 Writing Recipes in Rules
+**************************
+
+The recipe of a rule consists of one or more shell command lines to be
+executed, one at a time, in the order they appear.  Typically, the
+result of executing these commands is that the target of the rule is
+brought up to date.
+
+   Users use many different shell programs, but recipes in makefiles are
+always interpreted by '/bin/sh' unless the makefile specifies otherwise.
+*Note Recipe Execution: Execution.
+
+* Menu:
+
+* Recipe Syntax::               Recipe syntax features and pitfalls.
+* Echoing::                     How to control when recipes are echoed.
+* Execution::                   How recipes are executed.
+* Parallel::                    How recipes can be executed in parallel.
+* Errors::                      What happens after a recipe execution error.
+* Interrupts::                  What happens when a recipe is interrupted.
+* Recursion::                   Invoking 'make' from makefiles.
+* Canned Recipes::              Defining canned recipes.
+* Empty Recipes::               Defining useful, do-nothing recipes.
+
+
+File: make.info,  Node: Recipe Syntax,  Next: Echoing,  Prev: Recipes,  Up: Recipes
+
+5.1 Recipe Syntax
+=================
+
+Makefiles have the unusual property that there are really two distinct
+syntaxes in one file.  Most of the makefile uses 'make' syntax (*note
+Writing Makefiles: Makefiles.).  However, recipes are meant to be
+interpreted by the shell and so they are written using shell syntax.
+The 'make' program does not try to understand shell syntax: it performs
+only a very few specific translations on the content of the recipe
+before handing it to the shell.
+
+   Each line in the recipe must start with a tab (or the first character
+in the value of the '.RECIPEPREFIX' variable; *note Special
+Variables::), except that the first recipe line may be attached to the
+target-and-prerequisites line with a semicolon in between.  _Any_ line
+in the makefile that begins with a tab and appears in a "rule context"
+(that is, after a rule has been started until another rule or variable
+definition) will be considered part of a recipe for that rule.  Blank
+lines and lines of just comments may appear among the recipe lines; they
+are ignored.
+
+   Some consequences of these rules include:
+
+   * A blank line that begins with a tab is not blank: it's an empty
+     recipe (*note Empty Recipes::).
+
+   * A comment in a recipe is not a 'make' comment; it will be passed to
+     the shell as-is.  Whether the shell treats it as a comment or not
+     depends on your shell.
+
+   * A variable definition in a "rule context" which is indented by a
+     tab as the first character on the line, will be considered part of
+     a recipe, not a 'make' variable definition, and passed to the
+     shell.
+
+   * A conditional expression ('ifdef', 'ifeq', etc.  *note Syntax of
+     Conditionals: Conditional Syntax.) in a "rule context" which is
+     indented by a tab as the first character on the line, will be
+     considered part of a recipe and be passed to the shell.
+
+* Menu:
+
+* Splitting Recipe Lines::      Breaking long recipe lines for readability.
+* Variables in Recipes::        Using 'make' variables in recipes.
+
+
+File: make.info,  Node: Splitting Recipe Lines,  Next: Variables in Recipes,  Prev: Recipe Syntax,  Up: Recipe Syntax
+
+5.1.1 Splitting Recipe Lines
+----------------------------
+
+One of the few ways in which 'make' does interpret recipes is checking
+for a backslash just before the newline.  As in normal makefile syntax,
+a single logical recipe line can be split into multiple physical lines
+in the makefile by placing a backslash before each newline.  A sequence
+of lines like this is considered a single recipe line, and one instance
+of the shell will be invoked to run it.
+
+   However, in contrast to how they are treated in other places in a
+makefile (*note Splitting Long Lines: Splitting Lines.),
+backslash/newline pairs are _not_ removed from the recipe.  Both the
+backslash and the newline characters are preserved and passed to the
+shell.  How the backslash/newline is interpreted depends on your shell.
+If the first character of the next line after the backslash/newline is
+the recipe prefix character (a tab by default; *note Special
+Variables::), then that character (and only that character) is removed.
+Whitespace is never added to the recipe.
+
+   For example, the recipe for the all target in this makefile:
+
+     all :
+             @echo no\
+     space
+             @echo no\
+             space
+             @echo one \
+             space
+             @echo one\
+              space
+
+consists of four separate shell commands where the output is:
+
+     nospace
+     nospace
+     one space
+     one space
+
+   As a more complex example, this makefile:
+
+     all : ; @echo 'hello \
+             world' ; echo "hello \
+         world"
+
+will invoke one shell with a command of:
+
+     echo 'hello \
+     world' ; echo "hello \
+         world"
+
+which, according to shell quoting rules, will yield the following
+output:
+
+     hello \
+     world
+     hello     world
+
+Notice how the backslash/newline pair was removed inside the string
+quoted with double quotes ('"..."'), but not from the string quoted with
+single quotes (''...'').  This is the way the default shell ('/bin/sh')
+handles backslash/newline pairs.  If you specify a different shell in
+your makefiles it may treat them differently.
+
+   Sometimes you want to split a long line inside of single quotes, but
+you don't want the backslash/newline to appear in the quoted content.
+This is often the case when passing scripts to languages such as Perl,
+where extraneous backslashes inside the script can change its meaning or
+even be a syntax error.  One simple way of handling this is to place the
+quoted string, or even the entire command, into a 'make' variable then
+use the variable in the recipe.  In this situation the newline quoting
+rules for makefiles will be used, and the backslash/newline will be
+removed.  If we rewrite our example above using this method:
+
+     HELLO = 'hello \
+     world'
+
+     all : ; @echo $(HELLO)
+
+we will get output like this:
+
+     hello world
+
+   If you like, you can also use target-specific variables (*note
+Target-specific Variable Values: Target-specific.) to obtain a tighter
+correspondence between the variable and the recipe that uses it.
+
+
+File: make.info,  Node: Variables in Recipes,  Prev: Splitting Recipe Lines,  Up: Recipe Syntax
+
+5.1.2 Using Variables in Recipes
+--------------------------------
+
+The other way in which 'make' processes recipes is by expanding any
+variable references in them (*note Basics of Variable References:
+Reference.).  This occurs after make has finished reading all the
+makefiles and the target is determined to be out of date; so, the
+recipes for targets which are not rebuilt are never expanded.
+
+   Variable and function references in recipes have identical syntax and
+semantics to references elsewhere in the makefile.  They also have the
+same quoting rules: if you want a dollar sign to appear in your recipe,
+you must double it ('$$').  For shells like the default shell, that use
+dollar signs to introduce variables, it's important to keep clear in
+your mind whether the variable you want to reference is a 'make'
+variable (use a single dollar sign) or a shell variable (use two dollar
+signs).  For example:
+
+     LIST = one two three
+     all:
+             for i in $(LIST); do \
+                 echo $$i; \
+             done
+
+results in the following command being passed to the shell:
+
+     for i in one two three; do \
+         echo $i; \
+     done
+
+which generates the expected result:
+
+     one
+     two
+     three
+
+
+File: make.info,  Node: Echoing,  Next: Execution,  Prev: Recipe Syntax,  Up: Recipes
+
+5.2 Recipe Echoing
+==================
+
+Normally 'make' prints each line of the recipe before it is executed.
+We call this "echoing" because it gives the appearance that you are
+typing the lines yourself.
+
+   When a line starts with '@', the echoing of that line is suppressed.
+The '@' is discarded before the line is passed to the shell.  Typically
+you would use this for a command whose only effect is to print
+something, such as an 'echo' command to indicate progress through the
+makefile:
+
+     @echo About to make distribution files
+
+   When 'make' is given the flag '-n' or '--just-print' it only echoes
+most recipes, without executing them.  *Note Summary of Options: Options
+Summary.  In this case even the recipe lines starting with '@' are
+printed.  This flag is useful for finding out which recipes 'make'
+thinks are necessary without actually doing them.
+
+   The '-s' or '--silent' flag to 'make' prevents all echoing, as if all
+recipes started with '@'.  A rule in the makefile for the special target
+'.SILENT' without prerequisites has the same effect (*note Special
+Built-in Target Names: Special Targets.).
+
+
+File: make.info,  Node: Execution,  Next: Parallel,  Prev: Echoing,  Up: Recipes
+
+5.3 Recipe Execution
+====================
+
+When it is time to execute recipes to update a target, they are executed
+by invoking a new sub-shell for each line of the recipe, unless the
+'.ONESHELL' special target is in effect (*note Using One Shell: One
+Shell.) (In practice, 'make' may take shortcuts that do not affect the
+results.)
+
+   *Please note:* this implies that setting shell variables and invoking
+shell commands such as 'cd' that set a context local to each process
+will not affect the following lines in the recipe.(1)  If you want to
+use 'cd' to affect the next statement, put both statements in a single
+recipe line.  Then 'make' will invoke one shell to run the entire line,
+and the shell will execute the statements in sequence.  For example:
+
+     foo : bar/lose
+             cd $(@D) && gobble $(@F) > ../$@
+
+Here we use the shell AND operator ('&&') so that if the 'cd' command
+fails, the script will fail without trying to invoke the 'gobble'
+command in the wrong directory, which could cause problems (in this case
+it would certainly cause '../foo' to be truncated, at least).
+
+* Menu:
+
+* One Shell::                   One shell for all lines in a recipe.
+* Choosing the Shell::          How 'make' chooses the shell used
+                                  to run recipes.
+
+   ---------- Footnotes ----------
+
+   (1) On MS-DOS, the value of current working directory is *global*, so
+changing it _will_ affect the following recipe lines on those systems.
+
+
+File: make.info,  Node: One Shell,  Next: Choosing the Shell,  Prev: Execution,  Up: Execution
+
+5.3.1 Using One Shell
+---------------------
+
+Sometimes you would prefer that all the lines in the recipe be passed to
+a single invocation of the shell.  There are generally two situations
+where this is useful: first, it can improve performance in makefiles
+where recipes consist of many command lines, by avoiding extra
+processes.  Second, you might want newlines to be included in your
+recipe command (for example perhaps you are using a very different
+interpreter as your 'SHELL').  If the '.ONESHELL' special target appears
+anywhere in the makefile then _all_ recipe lines for each target will be
+provided to a single invocation of the shell.  Newlines between recipe
+lines will be preserved.  For example:
+
+     .ONESHELL:
+     foo : bar/lose
+             cd $(@D)
+             gobble $(@F) > ../$@
+
+would now work as expected even though the commands are on different
+recipe lines.
+
+   If '.ONESHELL' is provided, then only the first line of the recipe
+will be checked for the special prefix characters ('@', '-', and '+').
+Subsequent lines will include the special characters in the recipe line
+when the 'SHELL' is invoked.  If you want your recipe to start with one
+of these special characters you'll need to arrange for them to not be
+the first characters on the first line, perhaps by adding a comment or
+similar.  For example, this would be a syntax error in Perl because the
+first '@' is removed by make:
+
+     .ONESHELL:
+     SHELL = /usr/bin/perl
+     .SHELLFLAGS = -e
+     show :
+             @f = qw(a b c);
+             print "@f\n";
+
+However, either of these alternatives would work properly:
+
+     .ONESHELL:
+     SHELL = /usr/bin/perl
+     .SHELLFLAGS = -e
+     show :
+             # Make sure "@" is not the first character on the first line
+             @f = qw(a b c);
+             print "@f\n";
+
+or
+
+     .ONESHELL:
+     SHELL = /usr/bin/perl
+     .SHELLFLAGS = -e
+     show :
+             my @f = qw(a b c);
+             print "@f\n";
+
+   As a special feature, if 'SHELL' is determined to be a POSIX-style
+shell, the special prefix characters in "internal" recipe lines will be
+_removed_ before the recipe is processed.  This feature is intended to
+allow existing makefiles to add the '.ONESHELL' special target and still
+run properly without extensive modifications.  Since the special prefix
+characters are not legal at the beginning of a line in a POSIX shell
+script this is not a loss in functionality.  For example, this works as
+expected:
+
+     .ONESHELL:
+     foo : bar/lose
+             @cd $(@D)
+             @gobble $(@F) > ../$@
+
+   Even with this special feature, however, makefiles with '.ONESHELL'
+will behave differently in ways that could be noticeable.  For example,
+normally if any line in the recipe fails, that causes the rule to fail
+and no more recipe lines are processed.  Under '.ONESHELL' a failure of
+any but the final recipe line will not be noticed by 'make'.  You can
+modify '.SHELLFLAGS' to add the '-e' option to the shell which will
+cause any failure anywhere in the command line to cause the shell to
+fail, but this could itself cause your recipe to behave differently.
+Ultimately you may need to harden your recipe lines to allow them to
+work with '.ONESHELL'.
+
+
+File: make.info,  Node: Choosing the Shell,  Prev: One Shell,  Up: Execution
+
+5.3.2 Choosing the Shell
+------------------------
+
+The program used as the shell is taken from the variable 'SHELL'.  If
+this variable is not set in your makefile, the program '/bin/sh' is used
+as the shell.  The argument(s) passed to the shell are taken from the
+variable '.SHELLFLAGS'.  The default value of '.SHELLFLAGS' is '-c'
+normally, or '-ec' in POSIX-conforming mode.
+
+   Unlike most variables, the variable 'SHELL' is never set from the
+environment.  This is because the 'SHELL' environment variable is used
+to specify your personal choice of shell program for interactive use.
+It would be very bad for personal choices like this to affect the
+functioning of makefiles.  *Note Variables from the Environment:
+Environment.
+
+   Furthermore, when you do set 'SHELL' in your makefile that value is
+_not_ exported in the environment to recipe lines that 'make' invokes.
+Instead, the value inherited from the user's environment, if any, is
+exported.  You can override this behavior by explicitly exporting
+'SHELL' (*note Communicating Variables to a Sub-'make':
+Variables/Recursion.), forcing it to be passed in the environment to
+recipe lines.
+
+   However, on MS-DOS and MS-Windows the value of 'SHELL' in the
+environment *is* used, since on those systems most users do not set this
+variable, and therefore it is most likely set specifically to be used by
+'make'.  On MS-DOS, if the setting of 'SHELL' is not suitable for
+'make', you can set the variable 'MAKESHELL' to the shell that 'make'
+should use; if set it will be used as the shell instead of the value of
+'SHELL'.
+
+Choosing a Shell in DOS and Windows
+...................................
+
+Choosing a shell in MS-DOS and MS-Windows is much more complex than on
+other systems.
+
+   On MS-DOS, if 'SHELL' is not set, the value of the variable 'COMSPEC'
+(which is always set) is used instead.
+
+   The processing of lines that set the variable 'SHELL' in Makefiles is
+different on MS-DOS. The stock shell, 'command.com', is ridiculously
+limited in its functionality and many users of 'make' tend to install a
+replacement shell.  Therefore, on MS-DOS, 'make' examines the value of
+'SHELL', and changes its behavior based on whether it points to a
+Unix-style or DOS-style shell.  This allows reasonable functionality
+even if 'SHELL' points to 'command.com'.
+
+   If 'SHELL' points to a Unix-style shell, 'make' on MS-DOS
+additionally checks whether that shell can indeed be found; if not, it
+ignores the line that sets 'SHELL'.  In MS-DOS, GNU 'make' searches for
+the shell in the following places:
+
+  1. In the precise place pointed to by the value of 'SHELL'.  For
+     example, if the makefile specifies 'SHELL = /bin/sh', 'make' will
+     look in the directory '/bin' on the current drive.
+
+  2. In the current directory.
+
+  3. In each of the directories in the 'PATH' variable, in order.
+
+   In every directory it examines, 'make' will first look for the
+specific file ('sh' in the example above).  If this is not found, it
+will also look in that directory for that file with one of the known
+extensions which identify executable files.  For example '.exe', '.com',
+'.bat', '.btm', '.sh', and some others.
+
+   If any of these attempts is successful, the value of 'SHELL' will be
+set to the full pathname of the shell as found.  However, if none of
+these is found, the value of 'SHELL' will not be changed, and thus the
+line that sets it will be effectively ignored.  This is so 'make' will
+only support features specific to a Unix-style shell if such a shell is
+actually installed on the system where 'make' runs.
+
+   Note that this extended search for the shell is limited to the cases
+where 'SHELL' is set from the Makefile; if it is set in the environment
+or command line, you are expected to set it to the full pathname of the
+shell, exactly as things are on Unix.
+
+   The effect of the above DOS-specific processing is that a Makefile
+that contains 'SHELL = /bin/sh' (as many Unix makefiles do), will work
+on MS-DOS unaltered if you have e.g. 'sh.exe' installed in some
+directory along your 'PATH'.
+
+
+File: make.info,  Node: Parallel,  Next: Errors,  Prev: Execution,  Up: Recipes
+
+5.4 Parallel Execution
+======================
+
+GNU 'make' knows how to execute several recipes at once.  Normally,
+'make' will execute only one recipe at a time, waiting for it to finish
+before executing the next.  However, the '-j' or '--jobs' option tells
+'make' to execute many recipes simultaneously.  You can inhibit
+parallelism in a particular makefile with the '.NOTPARALLEL'
+pseudo-target (*note Special Built-in Target Names: Special Targets.).
+
+   On MS-DOS, the '-j' option has no effect, since that system doesn't
+support multi-processing.
+
+   If the '-j' option is followed by an integer, this is the number of
+recipes to execute at once; this is called the number of "job slots".
+If there is nothing looking like an integer after the '-j' option, there
+is no limit on the number of job slots.  The default number of job slots
+is one, which means serial execution (one thing at a time).
+
+   Handling recursive 'make' invocations raises issues for parallel
+execution.  For more information on this, see *note Communicating
+Options to a Sub-'make': Options/Recursion.
+
+   If a recipe fails (is killed by a signal or exits with a nonzero
+status), and errors are not ignored for that recipe (*note Errors in
+Recipes: Errors.), the remaining recipe lines to remake the same target
+will not be run.  If a recipe fails and the '-k' or '--keep-going'
+option was not given (*note Summary of Options: Options Summary.),
+'make' aborts execution.  If make terminates for any reason (including a
+signal) with child processes running, it waits for them to finish before
+actually exiting.
+
+   When the system is heavily loaded, you will probably want to run
+fewer jobs than when it is lightly loaded.  You can use the '-l' option
+to tell 'make' to limit the number of jobs to run at once, based on the
+load average.  The '-l' or '--max-load' option is followed by a
+floating-point number.  For example,
+
+     -l 2.5
+
+will not let 'make' start more than one job if the load average is above
+2.5.  The '-l' option with no following number removes the load limit,
+if one was given with a previous '-l' option.
+
+   More precisely, when 'make' goes to start up a job, and it already
+has at least one job running, it checks the current load average; if it
+is not lower than the limit given with '-l', 'make' waits until the load
+average goes below that limit, or until all the other jobs finish.
+
+   By default, there is no load limit.
+
+* Menu:
+
+* Parallel Output::             Handling output during parallel execution
+* Parallel Input::              Handling input during parallel execution
+
+
+File: make.info,  Node: Parallel Output,  Next: Parallel Input,  Prev: Parallel,  Up: Parallel
+
+5.4.1 Output During Parallel Execution
+--------------------------------------
+
+When running several recipes in parallel the output from each recipe
+appears as soon as it is generated, with the result that messages from
+different recipes may be interspersed, sometimes even appearing on the
+same line.  This can make reading the output very difficult.
+
+   To avoid this you can use the '--output-sync' ('-O') option.  This
+option instructs 'make' to save the output from the commands it invokes
+and print it all once the commands are completed.  Additionally, if
+there are multiple recursive 'make' invocations running in parallel,
+they will communicate so that only one of them is generating output at a
+time.
+
+   If working directory printing is enabled (*note The
+'--print-directory' Option: -w Option.), the enter/leave messages are
+printed around each output grouping.  If you prefer not to see these
+messages add the '--no-print-directory' option to 'MAKEFLAGS'.
+
+   There are four levels of granularity when synchronizing output,
+specified by giving an argument to the option (e.g., '-Oline' or
+'--output-sync=recurse').
+
+'none'
+     This is the default: all output is sent directly as it is generated
+     and no synchronization is performed.
+
+'line'
+     Output from each individual line of the recipe is grouped and
+     printed as soon as that line is complete.  If a recipe consists of
+     multiple lines, they may be interspersed with lines from other
+     recipes.
+
+'target'
+     Output from the entire recipe for each target is grouped and
+     printed once the target is complete.  This is the default if the
+     '--output-sync' or '-O' option is given with no argument.
+
+'recurse'
+     Output from each recursive invocation of 'make' is grouped and
+     printed once the recursive invocation is complete.
+
+   Regardless of the mode chosen, the total build time will be the same.
+The only difference is in how the output appears.
+
+   The 'target' and 'recurse' modes both collect the output of the
+entire recipe of a target and display it uninterrupted when the recipe
+completes.  The difference between them is in how recipes that contain
+recursive invocations of 'make' are treated (*note Recursive Use of
+'make': Recursion.).  For all recipes which have no recursive lines, the
+'target' and 'recurse' modes behave identically.
+
+   If the 'recurse' mode is chosen, recipes that contain recursive
+'make' invocations are treated the same as other targets: the output
+from the recipe, including the output from the recursive 'make', is
+saved and printed after the entire recipe is complete.  This ensures
+output from all the targets built by a given recursive 'make' instance
+are grouped together, which may make the output easier to understand.
+However it also leads to long periods of time during the build where no
+output is seen, followed by large bursts of output.  If you are not
+watching the build as it proceeds, but instead viewing a log of the
+build after the fact, this may be the best option for you.
+
+   If you are watching the output, the long gaps of quiet during the
+build can be frustrating.  The 'target' output synchronization mode
+detects when 'make' is going to be invoked recursively, using the
+standard methods, and it will not synchronize the output of those lines.
+The recursive 'make' will perform the synchronization for its targets
+and the output from each will be displayed immediately when it
+completes.  Be aware that output from recursive lines of the recipe are
+not synchronized (for example if the recursive line prints a message
+before running 'make', that message will not be synchronized).
+
+   The 'line' mode can be useful for front-ends that are watching the
+output of 'make' to track when recipes are started and completed.
+
+   Some programs invoked by 'make' may behave differently if they
+determine they're writing output to a terminal versus a file (often
+described as "interactive" vs.  "non-interactive" modes).  For example,
+many programs that can display colorized output will not do so if they
+determine they are not writing to a terminal.  If your makefile invokes
+a program like this then using the output synchronization options will
+cause the program to believe it's running in "non-interactive" mode even
+though the output will ultimately go to the terminal.
+
+
+File: make.info,  Node: Parallel Input,  Prev: Parallel Output,  Up: Parallel
+
+5.4.2 Input During Parallel Execution
+-------------------------------------
+
+Two processes cannot both take input from the same device at the same
+time.  To make sure that only one recipe tries to take input from the
+terminal at once, 'make' will invalidate the standard input streams of
+all but one running recipe.  If another recipe attempts to read from
+standard input it will usually incur a fatal error (a 'Broken pipe'
+signal).
+
+   It is unpredictable which recipe will have a valid standard input
+stream (which will come from the terminal, or wherever you redirect the
+standard input of 'make').  The first recipe run will always get it
+first, and the first recipe started after that one finishes will get it
+next, and so on.
+
+   We will change how this aspect of 'make' works if we find a better
+alternative.  In the mean time, you should not rely on any recipe using
+standard input at all if you are using the parallel execution feature;
+but if you are not using this feature, then standard input works
+normally in all recipes.
+
+
+File: make.info,  Node: Errors,  Next: Interrupts,  Prev: Parallel,  Up: Recipes
+
+5.5 Errors in Recipes
+=====================
+
+After each shell invocation returns, 'make' looks at its exit status.
+If the shell completed successfully (the exit status is zero), the next
+line in the recipe is executed in a new shell; after the last line is
+finished, the rule is finished.
+
+   If there is an error (the exit status is nonzero), 'make' gives up on
+the current rule, and perhaps on all rules.
+
+   Sometimes the failure of a certain recipe line does not indicate a
+problem.  For example, you may use the 'mkdir' command to ensure that a
+directory exists.  If the directory already exists, 'mkdir' will report
+an error, but you probably want 'make' to continue regardless.
+
+   To ignore errors in a recipe line, write a '-' at the beginning of
+the line's text (after the initial tab).  The '-' is discarded before
+the line is passed to the shell for execution.
+
+   For example,
+
+     clean:
+             -rm -f *.o
+
+This causes 'make' to continue even if 'rm' is unable to remove a file.
+
+   When you run 'make' with the '-i' or '--ignore-errors' flag, errors
+are ignored in all recipes of all rules.  A rule in the makefile for the
+special target '.IGNORE' has the same effect, if there are no
+prerequisites.  These ways of ignoring errors are obsolete because '-'
+is more flexible.
+
+   When errors are to be ignored, because of either a '-' or the '-i'
+flag, 'make' treats an error return just like success, except that it
+prints out a message that tells you the status code the shell exited
+with, and says that the error has been ignored.
+
+   When an error happens that 'make' has not been told to ignore, it
+implies that the current target cannot be correctly remade, and neither
+can any other that depends on it either directly or indirectly.  No
+further recipes will be executed for these targets, since their
+preconditions have not been achieved.
+
+   Normally 'make' gives up immediately in this circumstance, returning
+a nonzero status.  However, if the '-k' or '--keep-going' flag is
+specified, 'make' continues to consider the other prerequisites of the
+pending targets, remaking them if necessary, before it gives up and
+returns nonzero status.  For example, after an error in compiling one
+object file, 'make -k' will continue compiling other object files even
+though it already knows that linking them will be impossible.  *Note
+Summary of Options: Options Summary.
+
+   The usual behavior assumes that your purpose is to get the specified
+targets up to date; once 'make' learns that this is impossible, it might
+as well report the failure immediately.  The '-k' option says that the
+real purpose is to test as many of the changes made in the program as
+possible, perhaps to find several independent problems so that you can
+correct them all before the next attempt to compile.  This is why Emacs'
+'compile' command passes the '-k' flag by default.
+
+   Usually when a recipe line fails, if it has changed the target file
+at all, the file is corrupted and cannot be used--or at least it is not
+completely updated.  Yet the file's time stamp says that it is now up to
+date, so the next time 'make' runs, it will not try to update that file.
+The situation is just the same as when the shell is killed by a signal;
+*note Interrupts::.  So generally the right thing to do is to delete the
+target file if the recipe fails after beginning to change the file.
+'make' will do this if '.DELETE_ON_ERROR' appears as a target.  This is
+almost always what you want 'make' to do, but it is not historical
+practice; so for compatibility, you must explicitly request it.
+
+
+File: make.info,  Node: Interrupts,  Next: Recursion,  Prev: Errors,  Up: Recipes
+
+5.6 Interrupting or Killing 'make'
+==================================
+
+If 'make' gets a fatal signal while a shell is executing, it may delete
+the target file that the recipe was supposed to update.  This is done if
+the target file's last-modification time has changed since 'make' first
+checked it.
+
+   The purpose of deleting the target is to make sure that it is remade
+from scratch when 'make' is next run.  Why is this?  Suppose you type
+'Ctrl-c' while a compiler is running, and it has begun to write an
+object file 'foo.o'.  The 'Ctrl-c' kills the compiler, resulting in an
+incomplete file whose last-modification time is newer than the source
+file 'foo.c'.  But 'make' also receives the 'Ctrl-c' signal and deletes
+this incomplete file.  If 'make' did not do this, the next invocation of
+'make' would think that 'foo.o' did not require updating--resulting in a
+strange error message from the linker when it tries to link an object
+file half of which is missing.
+
+   You can prevent the deletion of a target file in this way by making
+the special target '.PRECIOUS' depend on it.  Before remaking a target,
+'make' checks to see whether it appears on the prerequisites of
+'.PRECIOUS', and thereby decides whether the target should be deleted if
+a signal happens.  Some reasons why you might do this are that the
+target is updated in some atomic fashion, or exists only to record a
+modification-time (its contents do not matter), or must exist at all
+times to prevent other sorts of trouble.
+
+
+File: make.info,  Node: Recursion,  Next: Canned Recipes,  Prev: Interrupts,  Up: Recipes
+
+5.7 Recursive Use of 'make'
+===========================
+
+Recursive use of 'make' means using 'make' as a command in a makefile.
+This technique is useful when you want separate makefiles for various
+subsystems that compose a larger system.  For example, suppose you have
+a sub-directory 'subdir' which has its own makefile, and you would like
+the containing directory's makefile to run 'make' on the sub-directory.
+You can do it by writing this:
+
+     subsystem:
+             cd subdir && $(MAKE)
+
+or, equivalently, this (*note Summary of Options: Options Summary.):
+
+     subsystem:
+             $(MAKE) -C subdir
+
+   You can write recursive 'make' commands just by copying this example,
+but there are many things to know about how they work and why, and about
+how the sub-'make' relates to the top-level 'make'.  You may also find
+it useful to declare targets that invoke recursive 'make' commands as
+'.PHONY' (for more discussion on when this is useful, see *note Phony
+Targets::).
+
+   For your convenience, when GNU 'make' starts (after it has processed
+any '-C' options) it sets the variable 'CURDIR' to the pathname of the
+current working directory.  This value is never touched by 'make' again:
+in particular note that if you include files from other directories the
+value of 'CURDIR' does not change.  The value has the same precedence it
+would have if it were set in the makefile (by default, an environment
+variable 'CURDIR' will not override this value).  Note that setting this
+variable has no impact on the operation of 'make' (it does not cause
+'make' to change its working directory, for example).
+
+* Menu:
+
+* MAKE Variable::               The special effects of using '$(MAKE)'.
+* Variables/Recursion::         How to communicate variables to a sub-'make'.
+* Options/Recursion::           How to communicate options to a sub-'make'.
+* -w Option::                   How the '-w' or '--print-directory' option
+                                  helps debug use of recursive 'make' commands.
+
+
+File: make.info,  Node: MAKE Variable,  Next: Variables/Recursion,  Prev: Recursion,  Up: Recursion
+
+5.7.1 How the 'MAKE' Variable Works
+-----------------------------------
+
+Recursive 'make' commands should always use the variable 'MAKE', not the
+explicit command name 'make', as shown here:
+
+     subsystem:
+             cd subdir && $(MAKE)
+
+   The value of this variable is the file name with which 'make' was
+invoked.  If this file name was '/bin/make', then the recipe executed is
+'cd subdir && /bin/make'.  If you use a special version of 'make' to run
+the top-level makefile, the same special version will be executed for
+recursive invocations.
+
+   As a special feature, using the variable 'MAKE' in the recipe of a
+rule alters the effects of the '-t' ('--touch'), '-n' ('--just-print'),
+or '-q' ('--question') option.  Using the 'MAKE' variable has the same
+effect as using a '+' character at the beginning of the recipe line.
+*Note Instead of Executing the Recipes: Instead of Execution.  This
+special feature is only enabled if the 'MAKE' variable appears directly
+in the recipe: it does not apply if the 'MAKE' variable is referenced
+through expansion of another variable.  In the latter case you must use
+the '+' token to get these special effects.
+
+   Consider the command 'make -t' in the above example.  (The '-t'
+option marks targets as up to date without actually running any recipes;
+see *note Instead of Execution::.)  Following the usual definition of
+'-t', a 'make -t' command in the example would create a file named
+'subsystem' and do nothing else.  What you really want it to do is run 'cd subdir &&
+make -t'; but that would require executing the recipe, and '-t' says not
+to execute recipes.
+
+   The special feature makes this do what you want: whenever a recipe
+line of a rule contains the variable 'MAKE', the flags '-t', '-n' and
+'-q' do not apply to that line.  Recipe lines containing 'MAKE' are
+executed normally despite the presence of a flag that causes most
+recipes not to be run.  The usual 'MAKEFLAGS' mechanism passes the flags
+to the sub-'make' (*note Communicating Options to a Sub-'make':
+Options/Recursion.), so your request to touch the files, or print the
+recipes, is propagated to the subsystem.
+
+
+File: make.info,  Node: Variables/Recursion,  Next: Options/Recursion,  Prev: MAKE Variable,  Up: Recursion
+
+5.7.2 Communicating Variables to a Sub-'make'
+---------------------------------------------
+
+Variable values of the top-level 'make' can be passed to the sub-'make'
+through the environment by explicit request.  These variables are
+defined in the sub-'make' as defaults, but they do not override
+variables defined in the makefile used by the sub-'make' unless you use
+the '-e' switch (*note Summary of Options: Options Summary.).
+
+   To pass down, or "export", a variable, 'make' adds the variable and
+its value to the environment for running each line of the recipe.  The
+sub-'make', in turn, uses the environment to initialize its table of
+variable values.  *Note Variables from the Environment: Environment.
+
+   Except by explicit request, 'make' exports a variable only if it is
+either defined in the environment initially or set on the command line,
+and if its name consists only of letters, numbers, and underscores.
+Some shells cannot cope with environment variable names consisting of
+characters other than letters, numbers, and underscores.
+
+   The value of the 'make' variable 'SHELL' is not exported.  Instead,
+the value of the 'SHELL' variable from the invoking environment is
+passed to the sub-'make'.  You can force 'make' to export its value for
+'SHELL' by using the 'export' directive, described below.  *Note
+Choosing the Shell::.
+
+   The special variable 'MAKEFLAGS' is always exported (unless you
+unexport it).  'MAKEFILES' is exported if you set it to anything.
+
+   'make' automatically passes down variable values that were defined on
+the command line, by putting them in the 'MAKEFLAGS' variable.  *Note
+Options/Recursion::.
+
+   Variables are _not_ normally passed down if they were created by
+default by 'make' (*note Variables Used by Implicit Rules: Implicit
+Variables.).  The sub-'make' will define these for itself.
+
+   If you want to export specific variables to a sub-'make', use the
+'export' directive, like this:
+
+     export VARIABLE ...
+
+If you want to _prevent_ a variable from being exported, use the
+'unexport' directive, like this:
+
+     unexport VARIABLE ...
+
+In both of these forms, the arguments to 'export' and 'unexport' are
+expanded, and so could be variables or functions which expand to a (list
+of) variable names to be (un)exported.
+
+   As a convenience, you can define a variable and export it at the same
+time by doing:
+
+     export VARIABLE = value
+
+has the same result as:
+
+     VARIABLE = value
+     export VARIABLE
+
+and
+
+     export VARIABLE := value
+
+has the same result as:
+
+     VARIABLE := value
+     export VARIABLE
+
+   Likewise,
+
+     export VARIABLE += value
+
+is just like:
+
+     VARIABLE += value
+     export VARIABLE
+
+*Note Appending More Text to Variables: Appending.
+
+   You may notice that the 'export' and 'unexport' directives work in
+'make' in the same way they work in the shell, 'sh'.
+
+   If you want all variables to be exported by default, you can use
+'export' by itself:
+
+     export
+
+This tells 'make' that variables which are not explicitly mentioned in
+an 'export' or 'unexport' directive should be exported.  Any variable
+given in an 'unexport' directive will still _not_ be exported.  If you
+use 'export' by itself to export variables by default, variables whose
+names contain characters other than alphanumerics and underscores will
+not be exported unless specifically mentioned in an 'export' directive.
+
+   The behavior elicited by an 'export' directive by itself was the
+default in older versions of GNU 'make'.  If your makefiles depend on
+this behavior and you want to be compatible with old versions of 'make',
+you can write a rule for the special target '.EXPORT_ALL_VARIABLES'
+instead of using the 'export' directive.  This will be ignored by old
+'make's, while the 'export' directive will cause a syntax error.
+
+   Likewise, you can use 'unexport' by itself to tell 'make' _not_ to
+export variables by default.  Since this is the default behavior, you
+would only need to do this if 'export' had been used by itself earlier
+(in an included makefile, perhaps).  You *cannot* use 'export' and
+'unexport' by themselves to have variables exported for some recipes and
+not for others.  The last 'export' or 'unexport' directive that appears
+by itself determines the behavior for the entire run of 'make'.
+
+   As a special feature, the variable 'MAKELEVEL' is changed when it is
+passed down from level to level.  This variable's value is a string
+which is the depth of the level as a decimal number.  The value is '0'
+for the top-level 'make'; '1' for a sub-'make', '2' for a
+sub-sub-'make', and so on.  The incrementation happens when 'make' sets
+up the environment for a recipe.
+
+   The main use of 'MAKELEVEL' is to test it in a conditional directive
+(*note Conditional Parts of Makefiles: Conditionals.); this way you can
+write a makefile that behaves one way if run recursively and another way
+if run directly by you.
+
+   You can use the variable 'MAKEFILES' to cause all sub-'make' commands
+to use additional makefiles.  The value of 'MAKEFILES' is a
+whitespace-separated list of file names.  This variable, if defined in
+the outer-level makefile, is passed down through the environment; then
+it serves as a list of extra makefiles for the sub-'make' to read before
+the usual or specified ones.  *Note The Variable 'MAKEFILES': MAKEFILES
+Variable.
+
+
+File: make.info,  Node: Options/Recursion,  Next: -w Option,  Prev: Variables/Recursion,  Up: Recursion
+
+5.7.3 Communicating Options to a Sub-'make'
+-------------------------------------------
+
+Flags such as '-s' and '-k' are passed automatically to the sub-'make'
+through the variable 'MAKEFLAGS'.  This variable is set up automatically
+by 'make' to contain the flag letters that 'make' received.  Thus, if
+you do 'make -ks' then 'MAKEFLAGS' gets the value 'ks'.
+
+   As a consequence, every sub-'make' gets a value for 'MAKEFLAGS' in
+its environment.  In response, it takes the flags from that value and
+processes them as if they had been given as arguments.  *Note Summary of
+Options: Options Summary.
+
+   Likewise variables defined on the command line are passed to the
+sub-'make' through 'MAKEFLAGS'.  Words in the value of 'MAKEFLAGS' that
+contain '=', 'make' treats as variable definitions just as if they
+appeared on the command line.  *Note Overriding Variables: Overriding.
+
+   The options '-C', '-f', '-o', and '-W' are not put into 'MAKEFLAGS';
+these options are not passed down.
+
+   The '-j' option is a special case (*note Parallel Execution:
+Parallel.).  If you set it to some numeric value 'N' and your operating
+system supports it (most any UNIX system will; others typically won't),
+the parent 'make' and all the sub-'make's will communicate to ensure
+that there are only 'N' jobs running at the same time between them all.
+Note that any job that is marked recursive (*note Instead of Executing
+Recipes: Instead of Execution.) doesn't count against the total jobs
+(otherwise we could get 'N' sub-'make's running and have no slots left
+over for any real work!)
+
+   If your operating system doesn't support the above communication,
+then no '-j' is added to 'MAKEFLAGS', so that sub-'make's run in
+non-parallel mode.  If the '-j' option were passed down to sub-'make's
+you would get many more jobs running in parallel than you asked for.  If
+you give '-j' with no numeric argument, meaning to run as many jobs as
+possible in parallel, this is passed down, since multiple infinities are
+no more than one.
+
+   If you do not want to pass the other flags down, you must change the
+value of 'MAKEFLAGS', like this:
+
+     subsystem:
+             cd subdir && $(MAKE) MAKEFLAGS=
+
+   The command line variable definitions really appear in the variable
+'MAKEOVERRIDES', and 'MAKEFLAGS' contains a reference to this variable.
+If you do want to pass flags down normally, but don't want to pass down
+the command line variable definitions, you can reset 'MAKEOVERRIDES' to
+empty, like this:
+
+     MAKEOVERRIDES =
+
+This is not usually useful to do.  However, some systems have a small
+fixed limit on the size of the environment, and putting so much
+information into the value of 'MAKEFLAGS' can exceed it.  If you see the
+error message 'Arg list too long', this may be the problem.  (For strict
+compliance with POSIX.2, changing 'MAKEOVERRIDES' does not affect
+'MAKEFLAGS' if the special target '.POSIX' appears in the makefile.  You
+probably do not care about this.)
+
+   A similar variable 'MFLAGS' exists also, for historical
+compatibility.  It has the same value as 'MAKEFLAGS' except that it does
+not contain the command line variable definitions, and it always begins
+with a hyphen unless it is empty ('MAKEFLAGS' begins with a hyphen only
+when it begins with an option that has no single-letter version, such as
+'--warn-undefined-variables').  'MFLAGS' was traditionally used
+explicitly in the recursive 'make' command, like this:
+
+     subsystem:
+             cd subdir && $(MAKE) $(MFLAGS)
+
+but now 'MAKEFLAGS' makes this usage redundant.  If you want your
+makefiles to be compatible with old 'make' programs, use this technique;
+it will work fine with more modern 'make' versions too.
+
+   The 'MAKEFLAGS' variable can also be useful if you want to have
+certain options, such as '-k' (*note Summary of Options: Options
+Summary.), set each time you run 'make'.  You simply put a value for
+'MAKEFLAGS' in your environment.  You can also set 'MAKEFLAGS' in a
+makefile, to specify additional flags that should also be in effect for
+that makefile.  (Note that you cannot use 'MFLAGS' this way.  That
+variable is set only for compatibility; 'make' does not interpret a
+value you set for it in any way.)
+
+   When 'make' interprets the value of 'MAKEFLAGS' (either from the
+environment or from a makefile), it first prepends a hyphen if the value
+does not already begin with one.  Then it chops the value into words
+separated by blanks, and parses these words as if they were options
+given on the command line (except that '-C', '-f', '-h', '-o', '-W', and
+their long-named versions are ignored; and there is no error for an
+invalid option).
+
+   If you do put 'MAKEFLAGS' in your environment, you should be sure not
+to include any options that will drastically affect the actions of
+'make' and undermine the purpose of makefiles and of 'make' itself.  For
+instance, the '-t', '-n', and '-q' options, if put in one of these
+variables, could have disastrous consequences and would certainly have
+at least surprising and probably annoying effects.
+
+   If you'd like to run other implementations of 'make' in addition to
+GNU 'make', and hence do not want to add GNU 'make'-specific flags to
+the 'MAKEFLAGS' variable, you can add them to the 'GNUMAKEFLAGS'
+variable instead.  This variable is parsed just before 'MAKEFLAGS', in
+the same way as 'MAKEFLAGS'.  When 'make' constructs 'MAKEFLAGS' to pass
+to a recursive 'make' it will include all flags, even those taken from
+'GNUMAKEFLAGS'.  As a result, after parsing 'GNUMAKEFLAGS' GNU 'make'
+sets this variable to the empty string to avoid duplicating flags during
+recursion.
+
+   It's best to use 'GNUMAKEFLAGS' only with flags which won't
+materially change the behavior of your makefiles.  If your makefiles
+require GNU make anyway then simply use 'MAKEFLAGS'.  Flags such as
+'--no-print-directory' or '--output-sync' may be appropriate for
+'GNUMAKEFLAGS'.
+
+
+File: make.info,  Node: -w Option,  Prev: Options/Recursion,  Up: Recursion
+
+5.7.4 The '--print-directory' Option
+------------------------------------
+
+If you use several levels of recursive 'make' invocations, the '-w' or '--print-directory'
+option can make the output a lot easier to understand by showing each
+directory as 'make' starts processing it and as 'make' finishes
+processing it.  For example, if 'make -w' is run in the directory
+'/u/gnu/make', 'make' will print a line of the form:
+
+     make: Entering directory `/u/gnu/make'.
+
+before doing anything else, and a line of the form:
+
+     make: Leaving directory `/u/gnu/make'.
+
+when processing is completed.
+
+   Normally, you do not need to specify this option because 'make' does
+it for you: '-w' is turned on automatically when you use the '-C'
+option, and in sub-'make's.  'make' will not automatically turn on '-w'
+if you also use '-s', which says to be silent, or if you use
+'--no-print-directory' to explicitly disable it.
+
+
+File: make.info,  Node: Canned Recipes,  Next: Empty Recipes,  Prev: Recursion,  Up: Recipes
+
+5.8 Defining Canned Recipes
+===========================
+
+When the same sequence of commands is useful in making various targets,
+you can define it as a canned sequence with the 'define' directive, and
+refer to the canned sequence from the recipes for those targets.  The
+canned sequence is actually a variable, so the name must not conflict
+with other variable names.
+
+   Here is an example of defining a canned recipe:
+
+     define run-yacc =
+     yacc $(firstword $^)
+     mv y.tab.c $@
+     endef
+
+Here 'run-yacc' is the name of the variable being defined; 'endef' marks
+the end of the definition; the lines in between are the commands.  The
+'define' directive does not expand variable references and function
+calls in the canned sequence; the '$' characters, parentheses, variable
+names, and so on, all become part of the value of the variable you are
+defining.  *Note Defining Multi-Line Variables: Multi-Line, for a
+complete explanation of 'define'.
+
+   The first command in this example runs Yacc on the first prerequisite
+of whichever rule uses the canned sequence.  The output file from Yacc
+is always named 'y.tab.c'.  The second command moves the output to the
+rule's target file name.
+
+   To use the canned sequence, substitute the variable into the recipe
+of a rule.  You can substitute it like any other variable (*note Basics
+of Variable References: Reference.).  Because variables defined by
+'define' are recursively expanded variables, all the variable references
+you wrote inside the 'define' are expanded now.  For example:
+
+     foo.c : foo.y
+             $(run-yacc)
+
+'foo.y' will be substituted for the variable '$^' when it occurs in
+'run-yacc''s value, and 'foo.c' for '$@'.
+
+   This is a realistic example, but this particular one is not needed in
+practice because 'make' has an implicit rule to figure out these
+commands based on the file names involved (*note Using Implicit Rules:
+Implicit Rules.).
+
+   In recipe execution, each line of a canned sequence is treated just
+as if the line appeared on its own in the rule, preceded by a tab.  In
+particular, 'make' invokes a separate sub-shell for each line.  You can
+use the special prefix characters that affect command lines ('@', '-',
+and '+') on each line of a canned sequence.  *Note Writing Recipes in
+Rules: Recipes.  For example, using this canned sequence:
+
+     define frobnicate =
+     @echo "frobnicating target $@"
+     frob-step-1 $< -o $@-step-1
+     frob-step-2 $@-step-1 -o $@
+     endef
+
+'make' will not echo the first line, the 'echo' command.  But it _will_
+echo the following two recipe lines.
+
+   On the other hand, prefix characters on the recipe line that refers
+to a canned sequence apply to every line in the sequence.  So the rule:
+
+     frob.out: frob.in
+             @$(frobnicate)
+
+does not echo _any_ recipe lines.  (*Note Recipe Echoing: Echoing, for a
+full explanation of '@'.)
+
+
+File: make.info,  Node: Empty Recipes,  Prev: Canned Recipes,  Up: Recipes
+
+5.9 Using Empty Recipes
+=======================
+
+It is sometimes useful to define recipes which do nothing.  This is done
+simply by giving a recipe that consists of nothing but whitespace.  For
+example:
+
+     target: ;
+
+defines an empty recipe for 'target'.  You could also use a line
+beginning with a recipe prefix character to define an empty recipe, but
+this would be confusing because such a line looks empty.
+
+   You may be wondering why you would want to define a recipe that does
+nothing.  One reason this is useful is to prevent a target from getting
+implicit recipes (from implicit rules or the '.DEFAULT' special target;
+*note Implicit Rules:: and *note Defining Last-Resort Default Rules:
+Last Resort.).
+
+   Empty recipes can also be used to avoid errors for targets that will
+be created as a side-effect of another recipe: if the target does not
+exist the empty recipe ensures that 'make' won't complain that it
+doesn't know how to build the target, and 'make' will assume the target
+is out of date.
+
+   You may be inclined to define empty recipes for targets that are not
+actual files, but only exist so that their prerequisites can be remade.
+However, this is not the best way to do that, because the prerequisites
+may not be remade properly if the target file actually does exist.
+*Note Phony Targets: Phony Targets, for a better way to do this.
+
+
+File: make.info,  Node: Using Variables,  Next: Conditionals,  Prev: Recipes,  Up: Top
+
+6 How to Use Variables
+**********************
+
+A "variable" is a name defined in a makefile to represent a string of
+text, called the variable's "value".  These values are substituted by
+explicit request into targets, prerequisites, recipes, and other parts
+of the makefile.  (In some other versions of 'make', variables are
+called "macros".)
+
+   Variables and functions in all parts of a makefile are expanded when
+read, except for in recipes, the right-hand sides of variable
+definitions using '=', and the bodies of variable definitions using the
+'define' directive.
+
+   Variables can represent lists of file names, options to pass to
+compilers, programs to run, directories to look in for source files,
+directories to write output in, or anything else you can imagine.
+
+   A variable name may be any sequence of characters not containing ':',
+'#', '=', or whitespace.  However, variable names containing characters
+other than letters, numbers, and underscores should be considered
+carefully, as in some shells they cannot be passed through the
+environment to a sub-'make' (*note Communicating Variables to a
+Sub-'make': Variables/Recursion.).  Variable names beginning with '.'
+and an uppercase letter may be given special meaning in future versions
+of 'make'.
+
+   Variable names are case-sensitive.  The names 'foo', 'FOO', and 'Foo'
+all refer to different variables.
+
+   It is traditional to use upper case letters in variable names, but we
+recommend using lower case letters for variable names that serve
+internal purposes in the makefile, and reserving upper case for
+parameters that control implicit rules or for parameters that the user
+should override with command options (*note Overriding Variables:
+Overriding.).
+
+   A few variables have names that are a single punctuation character or
+just a few characters.  These are the "automatic variables", and they
+have particular specialized uses.  *Note Automatic Variables::.
+
+* Menu:
+
+* Reference::                   How to use the value of a variable.
+* Flavors::                     Variables come in two flavors.
+* Advanced::                    Advanced features for referencing a variable.
+* Values::                      All the ways variables get their values.
+* Setting::                     How to set a variable in the makefile.
+* Appending::                   How to append more text to the old value
+                                  of a variable.
+* Override Directive::          How to set a variable in the makefile even if
+                                  the user has set it with a command argument.
+* Multi-Line::                  An alternate way to set a variable
+                                  to a multi-line string.
+* Undefine Directive::          How to undefine a variable so that it appears
+                                  as if it was never set.
+* Environment::                 Variable values can come from the environment.
+* Target-specific::             Variable values can be defined on a per-target
+                                  basis.
+* Pattern-specific::            Target-specific variable values can be applied
+                                  to a group of targets that match a pattern.
+* Suppressing Inheritance::     Suppress inheritance of variables.
+* Special Variables::           Variables with special meaning or behavior.
+
+
+File: make.info,  Node: Reference,  Next: Flavors,  Prev: Using Variables,  Up: Using Variables
+
+6.1 Basics of Variable References
+=================================
+
+To substitute a variable's value, write a dollar sign followed by the
+name of the variable in parentheses or braces: either '$(foo)' or
+'${foo}' is a valid reference to the variable 'foo'.  This special
+significance of '$' is why you must write '$$' to have the effect of a
+single dollar sign in a file name or recipe.
+
+   Variable references can be used in any context: targets,
+prerequisites, recipes, most directives, and new variable values.  Here
+is an example of a common case, where a variable holds the names of all
+the object files in a program:
+
+     objects = program.o foo.o utils.o
+     program : $(objects)
+             cc -o program $(objects)
+
+     $(objects) : defs.h
+
+   Variable references work by strict textual substitution.  Thus, the
+rule
+
+     foo = c
+     prog.o : prog.$(foo)
+             $(foo)$(foo) -$(foo) prog.$(foo)
+
+could be used to compile a C program 'prog.c'.  Since spaces before the
+variable value are ignored in variable assignments, the value of 'foo'
+is precisely 'c'.  (Don't actually write your makefiles this way!)
+
+   A dollar sign followed by a character other than a dollar sign,
+open-parenthesis or open-brace treats that single character as the
+variable name.  Thus, you could reference the variable 'x' with '$x'.
+However, this practice is strongly discouraged, except in the case of
+the automatic variables (*note Automatic Variables::).
+
+
+File: make.info,  Node: Flavors,  Next: Advanced,  Prev: Reference,  Up: Using Variables
+
+6.2 The Two Flavors of Variables
+================================
+
+There are two ways that a variable in GNU 'make' can have a value; we
+call them the two "flavors" of variables.  The two flavors are
+distinguished in how they are defined and in what they do when expanded.
+
+   The first flavor of variable is a "recursively expanded" variable.
+Variables of this sort are defined by lines using '=' (*note Setting
+Variables: Setting.) or by the 'define' directive (*note Defining
+Multi-Line Variables: Multi-Line.).  The value you specify is installed
+verbatim; if it contains references to other variables, these references
+are expanded whenever this variable is substituted (in the course of
+expanding some other string).  When this happens, it is called
+"recursive expansion".
+
+   For example,
+
+     foo = $(bar)
+     bar = $(ugh)
+     ugh = Huh?
+
+     all:;echo $(foo)
+
+will echo 'Huh?': '$(foo)' expands to '$(bar)' which expands to '$(ugh)'
+which finally expands to 'Huh?'.
+
+   This flavor of variable is the only sort supported by most other
+versions of 'make'.  It has its advantages and its disadvantages.  An
+advantage (most would say) is that:
+
+     CFLAGS = $(include_dirs) -O
+     include_dirs = -Ifoo -Ibar
+
+will do what was intended: when 'CFLAGS' is expanded in a recipe, it
+will expand to '-Ifoo -Ibar -O'.  A major disadvantage is that you
+cannot append something on the end of a variable, as in
+
+     CFLAGS = $(CFLAGS) -O
+
+because it will cause an infinite loop in the variable expansion.
+(Actually 'make' detects the infinite loop and reports an error.)
+
+   Another disadvantage is that any functions (*note Functions for
+Transforming Text: Functions.) referenced in the definition will be
+executed every time the variable is expanded.  This makes 'make' run
+slower; worse, it causes the 'wildcard' and 'shell' functions to give
+unpredictable results because you cannot easily control when they are
+called, or even how many times.
+
+   To avoid all the problems and inconveniences of recursively expanded
+variables, there is another flavor: simply expanded variables.
+
+   "Simply expanded variables" are defined by lines using ':=' or '::='
+(*note Setting Variables: Setting.).  Both forms are equivalent in GNU
+'make'; however only the '::=' form is described by the POSIX standard
+(support for '::=' was added to the POSIX standard in 2012, so older
+versions of 'make' won't accept this form either).
+
+   The value of a simply expanded variable is scanned once and for all,
+expanding any references to other variables and functions, when the
+variable is defined.  The actual value of the simply expanded variable
+is the result of expanding the text that you write.  It does not contain
+any references to other variables; it contains their values _as of the
+time this variable was defined_.  Therefore,
+
+     x := foo
+     y := $(x) bar
+     x := later
+
+is equivalent to
+
+     y := foo bar
+     x := later
+
+   When a simply expanded variable is referenced, its value is
+substituted verbatim.
+
+   Here is a somewhat more complicated example, illustrating the use of
+':=' in conjunction with the 'shell' function.  (*Note The 'shell'
+Function: Shell Function.)  This example also shows use of the variable
+'MAKELEVEL', which is changed when it is passed down from level to
+level.  (*Note Communicating Variables to a Sub-'make':
+Variables/Recursion, for information about 'MAKELEVEL'.)
+
+     ifeq (0,${MAKELEVEL})
+     whoami    := $(shell whoami)
+     host-type := $(shell arch)
+     MAKE := ${MAKE} host-type=${host-type} whoami=${whoami}
+     endif
+
+An advantage of this use of ':=' is that a typical 'descend into a
+directory' recipe then looks like this:
+
+     ${subdirs}:
+             ${MAKE} -C $@ all
+
+   Simply expanded variables generally make complicated makefile
+programming more predictable because they work like variables in most
+programming languages.  They allow you to redefine a variable using its
+own value (or its value processed in some way by one of the expansion
+functions) and to use the expansion functions much more efficiently
+(*note Functions for Transforming Text: Functions.).
+
+   You can also use them to introduce controlled leading whitespace into
+variable values.  Leading whitespace characters are discarded from your
+input before substitution of variable references and function calls;
+this means you can include leading spaces in a variable value by
+protecting them with variable references, like this:
+
+     nullstring :=
+     space := $(nullstring) # end of the line
+
+Here the value of the variable 'space' is precisely one space.  The
+comment '# end of the line' is included here just for clarity.  Since
+trailing space characters are _not_ stripped from variable values, just
+a space at the end of the line would have the same effect (but be rather
+hard to read).  If you put whitespace at the end of a variable value, it
+is a good idea to put a comment like that at the end of the line to make
+your intent clear.  Conversely, if you do _not_ want any whitespace
+characters at the end of your variable value, you must remember not to
+put a random comment on the end of the line after some whitespace, such
+as this:
+
+     dir := /foo/bar    # directory to put the frobs in
+
+Here the value of the variable 'dir' is '/foo/bar    ' (with four
+trailing spaces), which was probably not the intention.  (Imagine
+something like '$(dir)/file' with this definition!)
+
+   There is another assignment operator for variables, '?='.  This is
+called a conditional variable assignment operator, because it only has
+an effect if the variable is not yet defined.  This statement:
+
+     FOO ?= bar
+
+is exactly equivalent to this (*note The 'origin' Function: Origin
+Function.):
+
+     ifeq ($(origin FOO), undefined)
+       FOO = bar
+     endif
+
+   Note that a variable set to an empty value is still defined, so '?='
+will not set that variable.
+
+
+File: make.info,  Node: Advanced,  Next: Values,  Prev: Flavors,  Up: Using Variables
+
+6.3 Advanced Features for Reference to Variables
+================================================
+
+This section describes some advanced features you can use to reference
+variables in more flexible ways.
+
+* Menu:
+
+* Substitution Refs::           Referencing a variable with
+                                  substitutions on the value.
+* Computed Names::              Computing the name of the variable to refer to.
+
+
+File: make.info,  Node: Substitution Refs,  Next: Computed Names,  Prev: Advanced,  Up: Advanced
+
+6.3.1 Substitution References
+-----------------------------
+
+A "substitution reference" substitutes the value of a variable with
+alterations that you specify.  It has the form '$(VAR:A=B)' (or
+'${VAR:A=B}') and its meaning is to take the value of the variable VAR,
+replace every A at the end of a word with B in that value, and
+substitute the resulting string.
+
+   When we say "at the end of a word", we mean that A must appear either
+followed by whitespace or at the end of the value in order to be
+replaced; other occurrences of A in the value are unaltered.  For
+example:
+
+     foo := a.o b.o c.o
+     bar := $(foo:.o=.c)
+
+sets 'bar' to 'a.c b.c c.c'.  *Note Setting Variables: Setting.
+
+   A substitution reference is actually an abbreviation for use of the
+'patsubst' expansion function (*note Functions for String Substitution
+and Analysis: Text Functions.).  We provide substitution references as
+well as 'patsubst' for compatibility with other implementations of
+'make'.
+
+   Another type of substitution reference lets you use the full power of
+the 'patsubst' function.  It has the same form '$(VAR:A=B)' described
+above, except that now A must contain a single '%' character.  This case
+is equivalent to '$(patsubst A,B,$(VAR))'.  *Note Functions for String
+Substitution and Analysis: Text Functions, for a description of the
+'patsubst' function.
+
+For example:
+
+     foo := a.o b.o c.o
+     bar := $(foo:%.o=%.c)
+
+sets 'bar' to 'a.c b.c c.c'.
+
+
+File: make.info,  Node: Computed Names,  Prev: Substitution Refs,  Up: Advanced
+
+6.3.2 Computed Variable Names
+-----------------------------
+
+Computed variable names are a complicated concept needed only for
+sophisticated makefile programming.  For most purposes you need not
+consider them, except to know that making a variable with a dollar sign
+in its name might have strange results.  However, if you are the type
+that wants to understand everything, or you are actually interested in
+what they do, read on.
+
+   Variables may be referenced inside the name of a variable.  This is
+called a "computed variable name" or a "nested variable reference".  For
+example,
+
+     x = y
+     y = z
+     a := $($(x))
+
+defines 'a' as 'z': the '$(x)' inside '$($(x))' expands to 'y', so
+'$($(x))' expands to '$(y)' which in turn expands to 'z'.  Here the name
+of the variable to reference is not stated explicitly; it is computed by
+expansion of '$(x)'.  The reference '$(x)' here is nested within the
+outer variable reference.
+
+   The previous example shows two levels of nesting, but any number of
+levels is possible.  For example, here are three levels:
+
+     x = y
+     y = z
+     z = u
+     a := $($($(x)))
+
+Here the innermost '$(x)' expands to 'y', so '$($(x))' expands to '$(y)'
+which in turn expands to 'z'; now we have '$(z)', which becomes 'u'.
+
+   References to recursively-expanded variables within a variable name
+are re-expanded in the usual fashion.  For example:
+
+     x = $(y)
+     y = z
+     z = Hello
+     a := $($(x))
+
+defines 'a' as 'Hello': '$($(x))' becomes '$($(y))' which becomes '$(z)'
+which becomes 'Hello'.
+
+   Nested variable references can also contain modified references and
+function invocations (*note Functions for Transforming Text:
+Functions.), just like any other reference.  For example, using the
+'subst' function (*note Functions for String Substitution and Analysis:
+Text Functions.):
+
+     x = variable1
+     variable2 := Hello
+     y = $(subst 1,2,$(x))
+     z = y
+     a := $($($(z)))
+
+eventually defines 'a' as 'Hello'.  It is doubtful that anyone would
+ever want to write a nested reference as convoluted as this one, but it
+works: '$($($(z)))' expands to '$($(y))' which becomes '$($(subst
+1,2,$(x)))'.  This gets the value 'variable1' from 'x' and changes it by
+substitution to 'variable2', so that the entire string becomes
+'$(variable2)', a simple variable reference whose value is 'Hello'.
+
+   A computed variable name need not consist entirely of a single
+variable reference.  It can contain several variable references, as well
+as some invariant text.  For example,
+
+     a_dirs := dira dirb
+     1_dirs := dir1 dir2
+
+     a_files := filea fileb
+     1_files := file1 file2
+
+     ifeq "$(use_a)" "yes"
+     a1 := a
+     else
+     a1 := 1
+     endif
+
+     ifeq "$(use_dirs)" "yes"
+     df := dirs
+     else
+     df := files
+     endif
+
+     dirs := $($(a1)_$(df))
+
+will give 'dirs' the same value as 'a_dirs', '1_dirs', 'a_files' or
+'1_files' depending on the settings of 'use_a' and 'use_dirs'.
+
+   Computed variable names can also be used in substitution references:
+
+     a_objects := a.o b.o c.o
+     1_objects := 1.o 2.o 3.o
+
+     sources := $($(a1)_objects:.o=.c)
+
+defines 'sources' as either 'a.c b.c c.c' or '1.c 2.c 3.c', depending on
+the value of 'a1'.
+
+   The only restriction on this sort of use of nested variable
+references is that they cannot specify part of the name of a function to
+be called.  This is because the test for a recognized function name is
+done before the expansion of nested references.  For example,
+
+     ifdef do_sort
+     func := sort
+     else
+     func := strip
+     endif
+
+     bar := a d b g q c
+
+     foo := $($(func) $(bar))
+
+attempts to give 'foo' the value of the variable 'sort a d b g q c' or
+'strip a d b g q c', rather than giving 'a d b g q c' as the argument to
+either the 'sort' or the 'strip' function.  This restriction could be
+removed in the future if that change is shown to be a good idea.
+
+   You can also use computed variable names in the left-hand side of a
+variable assignment, or in a 'define' directive, as in:
+
+     dir = foo
+     $(dir)_sources := $(wildcard $(dir)/*.c)
+     define $(dir)_print =
+     lpr $($(dir)_sources)
+     endef
+
+This example defines the variables 'dir', 'foo_sources', and
+'foo_print'.
+
+   Note that "nested variable references" are quite different from
+"recursively expanded variables" (*note The Two Flavors of Variables:
+Flavors.), though both are used together in complex ways when doing
+makefile programming.
+
+
+File: make.info,  Node: Values,  Next: Setting,  Prev: Advanced,  Up: Using Variables
+
+6.4 How Variables Get Their Values
+==================================
+
+Variables can get values in several different ways:
+
+   * You can specify an overriding value when you run 'make'.  *Note
+     Overriding Variables: Overriding.
+
+   * You can specify a value in the makefile, either with an assignment
+     (*note Setting Variables: Setting.) or with a verbatim definition
+     (*note Defining Multi-Line Variables: Multi-Line.).
+
+   * Variables in the environment become 'make' variables.  *Note
+     Variables from the Environment: Environment.
+
+   * Several "automatic" variables are given new values for each rule.
+     Each of these has a single conventional use.  *Note Automatic
+     Variables::.
+
+   * Several variables have constant initial values.  *Note Variables
+     Used by Implicit Rules: Implicit Variables.
+
+
+File: make.info,  Node: Setting,  Next: Appending,  Prev: Values,  Up: Using Variables
+
+6.5 Setting Variables
+=====================
+
+To set a variable from the makefile, write a line starting with the
+variable name followed by '=', ':=', or '::='.  Whatever follows the
+'=', ':=', or '::=' on the line becomes the value.  For example,
+
+     objects = main.o foo.o bar.o utils.o
+
+defines a variable named 'objects'.  Whitespace around the variable name
+and immediately after the '=' is ignored.
+
+   Variables defined with '=' are "recursively expanded" variables.
+Variables defined with ':=' or '::=' are "simply expanded" variables;
+these definitions can contain variable references which will be expanded
+before the definition is made.  *Note The Two Flavors of Variables:
+Flavors.
+
+   The variable name may contain function and variable references, which
+are expanded when the line is read to find the actual variable name to
+use.
+
+   There is no limit on the length of the value of a variable except the
+amount of memory on the computer.  You can split the value of a variable
+into multiple physical lines for readability (*note Splitting Long
+Lines: Splitting Lines.).
+
+   Most variable names are considered to have the empty string as a
+value if you have never set them.  Several variables have built-in
+initial values that are not empty, but you can set them in the usual
+ways (*note Variables Used by Implicit Rules: Implicit Variables.).
+Several special variables are set automatically to a new value for each
+rule; these are called the "automatic" variables (*note Automatic
+Variables::).
+
+   If you'd like a variable to be set to a value only if it's not
+already set, then you can use the shorthand operator '?=' instead of
+'='.  These two settings of the variable 'FOO' are identical (*note The
+'origin' Function: Origin Function.):
+
+     FOO ?= bar
+
+and
+
+     ifeq ($(origin FOO), undefined)
+     FOO = bar
+     endif
+
+   The shell assignment operator '!=' can be used to execute a shell
+script and set a variable to its output.  This operator first evaluates
+the right-hand side, then passes that result to the shell for execution.
+If the result of the execution ends in a newline, that one newline is
+removed; all other newlines are replaced by spaces.  The resulting
+string is then placed into the named recursively-expanded variable.  For
+example:
+
+     hash != printf '\043'
+     file_list != find . -name '*.c'
+
+   If the result of the execution could produce a '$', and you don't
+intend what follows that to be interpreted as a make variable or
+function reference, then you must replace every '$' with '$$' as part of
+the execution.  Alternatively, you can set a simply expanded variable to
+the result of running a program using the 'shell' function call.  *Note
+The 'shell' Function: Shell Function.  For example:
+
+     hash := $(shell printf '\043')
+     var := $(shell find . -name "*.c")
+
+   As with the 'shell' function, the exit status of the just-invoked
+shell script is stored in the '.SHELLSTATUS' variable.
+
+
+File: make.info,  Node: Appending,  Next: Override Directive,  Prev: Setting,  Up: Using Variables
+
+6.6 Appending More Text to Variables
+====================================
+
+Often it is useful to add more text to the value of a variable already
+defined.  You do this with a line containing '+=', like this:
+
+     objects += another.o
+
+This takes the value of the variable 'objects', and adds the text
+'another.o' to it (preceded by a single space).  Thus:
+
+     objects = main.o foo.o bar.o utils.o
+     objects += another.o
+
+sets 'objects' to 'main.o foo.o bar.o utils.o another.o'.
+
+   Using '+=' is similar to:
+
+     objects = main.o foo.o bar.o utils.o
+     objects := $(objects) another.o
+
+but differs in ways that become important when you use more complex
+values.
+
+   When the variable in question has not been defined before, '+=' acts
+just like normal '=': it defines a recursively-expanded variable.
+However, when there _is_ a previous definition, exactly what '+=' does
+depends on what flavor of variable you defined originally.  *Note The
+Two Flavors of Variables: Flavors, for an explanation of the two flavors
+of variables.
+
+   When you add to a variable's value with '+=', 'make' acts essentially
+as if you had included the extra text in the initial definition of the
+variable.  If you defined it first with ':=' or '::=', making it a
+simply-expanded variable, '+=' adds to that simply-expanded definition,
+and expands the new text before appending it to the old value just as
+':=' does (see *note Setting Variables: Setting, for a full explanation
+of ':=' or '::=').  In fact,
+
+     variable := value
+     variable += more
+
+is exactly equivalent to:
+
+     variable := value
+     variable := $(variable) more
+
+   On the other hand, when you use '+=' with a variable that you defined
+first to be recursively-expanded using plain '=', 'make' does something
+a bit different.  Recall that when you define a recursively-expanded
+variable, 'make' does not expand the value you set for variable and
+function references immediately.  Instead it stores the text verbatim,
+and saves these variable and function references to be expanded later,
+when you refer to the new variable (*note The Two Flavors of Variables:
+Flavors.).  When you use '+=' on a recursively-expanded variable, it is
+this unexpanded text to which 'make' appends the new text you specify.
+
+     variable = value
+     variable += more
+
+is roughly equivalent to:
+
+     temp = value
+     variable = $(temp) more
+
+except that of course it never defines a variable called 'temp'.  The
+importance of this comes when the variable's old value contains variable
+references.  Take this common example:
+
+     CFLAGS = $(includes) -O
+     ...
+     CFLAGS += -pg # enable profiling
+
+The first line defines the 'CFLAGS' variable with a reference to another
+variable, 'includes'.  ('CFLAGS' is used by the rules for C compilation;
+*note Catalogue of Built-In Rules: Catalogue of Rules.)  Using '=' for
+the definition makes 'CFLAGS' a recursively-expanded variable, meaning '$(includes) -O'
+is _not_ expanded when 'make' processes the definition of 'CFLAGS'.
+Thus, 'includes' need not be defined yet for its value to take effect.
+It only has to be defined before any reference to 'CFLAGS'.  If we tried
+to append to the value of 'CFLAGS' without using '+=', we might do it
+like this:
+
+     CFLAGS := $(CFLAGS) -pg # enable profiling
+
+This is pretty close, but not quite what we want.  Using ':=' redefines
+'CFLAGS' as a simply-expanded variable; this means 'make' expands the
+text '$(CFLAGS) -pg' before setting the variable.  If 'includes' is not
+yet defined, we get ' -O -pg', and a later definition of 'includes' will
+have no effect.  Conversely, by using '+=' we set 'CFLAGS' to the
+_unexpanded_ value '$(includes) -O -pg'.  Thus we preserve the reference
+to 'includes', so if that variable gets defined at any later point, a
+reference like '$(CFLAGS)' still uses its value.
+
+
+File: make.info,  Node: Override Directive,  Next: Multi-Line,  Prev: Appending,  Up: Using Variables
+
+6.7 The 'override' Directive
+============================
+
+If a variable has been set with a command argument (*note Overriding
+Variables: Overriding.), then ordinary assignments in the makefile are
+ignored.  If you want to set the variable in the makefile even though it
+was set with a command argument, you can use an 'override' directive,
+which is a line that looks like this:
+
+     override VARIABLE = VALUE
+
+or
+
+     override VARIABLE := VALUE
+
+   To append more text to a variable defined on the command line, use:
+
+     override VARIABLE += MORE TEXT
+
+*Note Appending More Text to Variables: Appending.
+
+   Variable assignments marked with the 'override' flag have a higher
+priority than all other assignments, except another 'override'.
+Subsequent assignments or appends to this variable which are not marked
+'override' will be ignored.
+
+   The 'override' directive was not invented for escalation in the war
+between makefiles and command arguments.  It was invented so you can
+alter and add to values that the user specifies with command arguments.
+
+   For example, suppose you always want the '-g' switch when you run the
+C compiler, but you would like to allow the user to specify the other
+switches with a command argument just as usual.  You could use this
+'override' directive:
+
+     override CFLAGS += -g
+
+   You can also use 'override' directives with 'define' directives.
+This is done as you might expect:
+
+     override define foo =
+     bar
+     endef
+
+*Note Defining Multi-Line Variables: Multi-Line.
+
+
+File: make.info,  Node: Multi-Line,  Next: Undefine Directive,  Prev: Override Directive,  Up: Using Variables
+
+6.8 Defining Multi-Line Variables
+=================================
+
+Another way to set the value of a variable is to use the 'define'
+directive.  This directive has an unusual syntax which allows newline
+characters to be included in the value, which is convenient for defining
+both canned sequences of commands (*note Defining Canned Recipes: Canned
+Recipes.), and also sections of makefile syntax to use with 'eval'
+(*note Eval Function::).
+
+   The 'define' directive is followed on the same line by the name of
+the variable being defined and an (optional) assignment operator, and
+nothing more.  The value to give the variable appears on the following
+lines.  The end of the value is marked by a line containing just the
+word 'endef'.  Aside from this difference in syntax, 'define' works just
+like any other variable definition.  The variable name may contain
+function and variable references, which are expanded when the directive
+is read to find the actual variable name to use.
+
+   You may omit the variable assignment operator if you prefer.  If
+omitted, 'make' assumes it to be '=' and creates a recursively-expanded
+variable (*note The Two Flavors of Variables: Flavors.).  When using a
+'+=' operator, the value is appended to the previous value as with any
+other append operation: with a single space separating the old and new
+values.
+
+   You may nest 'define' directives: 'make' will keep track of nested
+directives and report an error if they are not all properly closed with
+'endef'.  Note that lines beginning with the recipe prefix character are
+considered part of a recipe, so any 'define' or 'endef' strings
+appearing on such a line will not be considered 'make' directives.
+
+     define two-lines =
+     echo foo
+     echo $(bar)
+     endef
+
+   The value in an ordinary assignment cannot contain a newline; but the
+newlines that separate the lines of the value in a 'define' become part
+of the variable's value (except for the final newline which precedes the
+'endef' and is not considered part of the value).
+
+   When used in a recipe, the previous example is functionally
+equivalent to this:
+
+     two-lines = echo foo; echo $(bar)
+
+since two commands separated by semicolon behave much like two separate
+shell commands.  However, note that using two separate lines means
+'make' will invoke the shell twice, running an independent sub-shell for
+each line.  *Note Recipe Execution: Execution.
+
+   If you want variable definitions made with 'define' to take
+precedence over command-line variable definitions, you can use the
+'override' directive together with 'define':
+
+     override define two-lines =
+     foo
+     $(bar)
+     endef
+
+*Note The 'override' Directive: Override Directive.
+
+
+File: make.info,  Node: Undefine Directive,  Next: Environment,  Prev: Multi-Line,  Up: Using Variables
+
+6.9 Undefining Variables
+========================
+
+If you want to clear a variable, setting its value to empty is usually
+sufficient.  Expanding such a variable will yield the same result (empty
+string) regardless of whether it was set or not.  However, if you are
+using the 'flavor' (*note Flavor Function::) and 'origin' (*note Origin
+Function::) functions, there is a difference between a variable that was
+never set and a variable with an empty value.  In such situations you
+may want to use the 'undefine' directive to make a variable appear as if
+it was never set.  For example:
+
+     foo := foo
+     bar = bar
+
+     undefine foo
+     undefine bar
+
+     $(info $(origin foo))
+     $(info $(flavor bar))
+
+   This example will print "undefined" for both variables.
+
+   If you want to undefine a command-line variable definition, you can
+use the 'override' directive together with 'undefine', similar to how
+this is done for variable definitions:
+
+     override undefine CFLAGS
+
+
+File: make.info,  Node: Environment,  Next: Target-specific,  Prev: Undefine Directive,  Up: Using Variables
+
+6.10 Variables from the Environment
+===================================
+
+Variables in 'make' can come from the environment in which 'make' is
+run.  Every environment variable that 'make' sees when it starts up is
+transformed into a 'make' variable with the same name and value.
+However, an explicit assignment in the makefile, or with a command
+argument, overrides the environment.  (If the '-e' flag is specified,
+then values from the environment override assignments in the makefile.
+*Note Summary of Options: Options Summary.  But this is not recommended
+practice.)
+
+   Thus, by setting the variable 'CFLAGS' in your environment, you can
+cause all C compilations in most makefiles to use the compiler switches
+you prefer.  This is safe for variables with standard or conventional
+meanings because you know that no makefile will use them for other
+things.  (Note this is not totally reliable; some makefiles set 'CFLAGS'
+explicitly and therefore are not affected by the value in the
+environment.)
+
+   When 'make' runs a recipe, variables defined in the makefile are
+placed into the environment of each shell.  This allows you to pass
+values to sub-'make' invocations (*note Recursive Use of 'make':
+Recursion.).  By default, only variables that came from the environment
+or the command line are passed to recursive invocations.  You can use
+the 'export' directive to pass other variables.  *Note Communicating
+Variables to a Sub-'make': Variables/Recursion, for full details.
+
+   Other use of variables from the environment is not recommended.  It
+is not wise for makefiles to depend for their functioning on environment
+variables set up outside their control, since this would cause different
+users to get different results from the same makefile.  This is against
+the whole purpose of most makefiles.
+
+   Such problems would be especially likely with the variable 'SHELL',
+which is normally present in the environment to specify the user's
+choice of interactive shell.  It would be very undesirable for this
+choice to affect 'make'; so, 'make' handles the 'SHELL' environment
+variable in a special way; see *note Choosing the Shell::.
+
+
+File: make.info,  Node: Target-specific,  Next: Pattern-specific,  Prev: Environment,  Up: Using Variables
+
+6.11 Target-specific Variable Values
+====================================
+
+Variable values in 'make' are usually global; that is, they are the same
+regardless of where they are evaluated (unless they're reset, of
+course).  One exception to that is automatic variables (*note Automatic
+Variables::).
+
+   The other exception is "target-specific variable values".  This
+feature allows you to define different values for the same variable,
+based on the target that 'make' is currently building.  As with
+automatic variables, these values are only available within the context
+of a target's recipe (and in other target-specific assignments).
+
+   Set a target-specific variable value like this:
+
+     TARGET ... : VARIABLE-ASSIGNMENT
+
+   Target-specific variable assignments can be prefixed with any or all
+of the special keywords 'export', 'override', or 'private'; these apply
+their normal behavior to this instance of the variable only.
+
+   Multiple TARGET values create a target-specific variable value for
+each member of the target list individually.
+
+   The VARIABLE-ASSIGNMENT can be any valid form of assignment;
+recursive ('='), simple (':=' or '::='), appending ('+='), or
+conditional ('?=').  All variables that appear within the
+VARIABLE-ASSIGNMENT are evaluated within the context of the target:
+thus, any previously-defined target-specific variable values will be in
+effect.  Note that this variable is actually distinct from any "global"
+value: the two variables do not have to have the same flavor (recursive
+vs. simple).
+
+   Target-specific variables have the same priority as any other
+makefile variable.  Variables provided on the command line (and in the
+environment if the '-e' option is in force) will take precedence.
+Specifying the 'override' directive will allow the target-specific
+variable value to be preferred.
+
+   There is one more special feature of target-specific variables: when
+you define a target-specific variable that variable value is also in
+effect for all prerequisites of this target, and all their
+prerequisites, etc. (unless those prerequisites override that variable
+with their own target-specific variable value).  So, for example, a
+statement like this:
+
+     prog : CFLAGS = -g
+     prog : prog.o foo.o bar.o
+
+will set 'CFLAGS' to '-g' in the recipe for 'prog', but it will also set
+'CFLAGS' to '-g' in the recipes that create 'prog.o', 'foo.o', and
+'bar.o', and any recipes which create their prerequisites.
+
+   Be aware that a given prerequisite will only be built once per
+invocation of make, at most.  If the same file is a prerequisite of
+multiple targets, and each of those targets has a different value for
+the same target-specific variable, then the first target to be built
+will cause that prerequisite to be built and the prerequisite will
+inherit the target-specific value from the first target.  It will ignore
+the target-specific values from any other targets.
+
+
+File: make.info,  Node: Pattern-specific,  Next: Suppressing Inheritance,  Prev: Target-specific,  Up: Using Variables
+
+6.12 Pattern-specific Variable Values
+=====================================
+
+In addition to target-specific variable values (*note Target-specific
+Variable Values: Target-specific.), GNU 'make' supports pattern-specific
+variable values.  In this form, the variable is defined for any target
+that matches the pattern specified.
+
+   Set a pattern-specific variable value like this:
+
+     PATTERN ... : VARIABLE-ASSIGNMENT
+   where PATTERN is a %-pattern.  As with target-specific variable
+values, multiple PATTERN values create a pattern-specific variable value
+for each pattern individually.  The VARIABLE-ASSIGNMENT can be any valid
+form of assignment.  Any command line variable setting will take
+precedence, unless 'override' is specified.
+
+   For example:
+
+     %.o : CFLAGS = -O
+
+will assign 'CFLAGS' the value of '-O' for all targets matching the
+pattern '%.o'.
+
+   If a target matches more than one pattern, the matching
+pattern-specific variables with longer stems are interpreted first.
+This results in more specific variables taking precedence over the more
+generic ones, for example:
+
+     %.o: %.c
+             $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+     lib/%.o: CFLAGS := -fPIC -g
+     %.o: CFLAGS := -g
+
+     all: foo.o lib/bar.o
+
+   In this example the first definition of the 'CFLAGS' variable will be
+used to update 'lib/bar.o' even though the second one also applies to
+this target.  Pattern-specific variables which result in the same stem
+length are considered in the order in which they were defined in the
+makefile.
+
+   Pattern-specific variables are searched after any target-specific
+variables defined explicitly for that target, and before target-specific
+variables defined for the parent target.
+
+
+File: make.info,  Node: Suppressing Inheritance,  Next: Special Variables,  Prev: Pattern-specific,  Up: Using Variables
+
+6.13 Suppressing Inheritance
+============================
+
+As described in previous sections, 'make' variables are inherited by
+prerequisites.  This capability allows you to modify the behavior of a
+prerequisite based on which targets caused it to be rebuilt.  For
+example, you might set a target-specific variable on a 'debug' target,
+then running 'make debug' will cause that variable to be inherited by
+all prerequisites of 'debug', while just running 'make all' (for
+example) would not have that assignment.
+
+   Sometimes, however, you may not want a variable to be inherited.  For
+these situations, 'make' provides the 'private' modifier.  Although this
+modifier can be used with any variable assignment, it makes the most
+sense with target- and pattern-specific variables.  Any variable marked
+'private' will be visible to its local target but will not be inherited
+by prerequisites of that target.  A global variable marked 'private'
+will be visible in the global scope but will not be inherited by any
+target, and hence will not be visible in any recipe.
+
+   As an example, consider this makefile:
+     EXTRA_CFLAGS =
+
+     prog: private EXTRA_CFLAGS = -L/usr/local/lib
+     prog: a.o b.o
+
+   Due to the 'private' modifier, 'a.o' and 'b.o' will not inherit the
+'EXTRA_CFLAGS' variable assignment from the 'prog' target.
+
+
+File: make.info,  Node: Special Variables,  Prev: Suppressing Inheritance,  Up: Using Variables
+
+6.14 Other Special Variables
+============================
+
+GNU 'make' supports some variables that have special properties.
+
+'MAKEFILE_LIST'
+     Contains the name of each makefile that is parsed by 'make', in the
+     order in which it was parsed.  The name is appended just before
+     'make' begins to parse the makefile.  Thus, if the first thing a
+     makefile does is examine the last word in this variable, it will be
+     the name of the current makefile.  Once the current makefile has
+     used 'include', however, the last word will be the just-included
+     makefile.
+
+     If a makefile named 'Makefile' has this content:
+
+          name1 := $(lastword $(MAKEFILE_LIST))
+
+          include inc.mk
+
+          name2 := $(lastword $(MAKEFILE_LIST))
+
+          all:
+                  @echo name1 = $(name1)
+                  @echo name2 = $(name2)
+
+     then you would expect to see this output:
+
+          name1 = Makefile
+          name2 = inc.mk
+
+'.DEFAULT_GOAL'
+     Sets the default goal to be used if no targets were specified on
+     the command line (*note Arguments to Specify the Goals: Goals.).
+     The '.DEFAULT_GOAL' variable allows you to discover the current
+     default goal, restart the default goal selection algorithm by
+     clearing its value, or to explicitly set the default goal.  The
+     following example illustrates these cases:
+
+          # Query the default goal.
+          ifeq ($(.DEFAULT_GOAL),)
+            $(warning no default goal is set)
+          endif
+
+          .PHONY: foo
+          foo: ; @echo $@
+
+          $(warning default goal is $(.DEFAULT_GOAL))
+
+          # Reset the default goal.
+          .DEFAULT_GOAL :=
+
+          .PHONY: bar
+          bar: ; @echo $@
+
+          $(warning default goal is $(.DEFAULT_GOAL))
+
+          # Set our own.
+          .DEFAULT_GOAL := foo
+
+     This makefile prints:
+
+          no default goal is set
+          default goal is foo
+          default goal is bar
+          foo
+
+     Note that assigning more than one target name to '.DEFAULT_GOAL' is
+     invalid and will result in an error.
+
+'MAKE_RESTARTS'
+     This variable is set only if this instance of 'make' has restarted
+     (*note How Makefiles Are Remade: Remaking Makefiles.): it will
+     contain the number of times this instance has restarted.  Note this
+     is not the same as recursion (counted by the 'MAKELEVEL' variable).
+     You should not set, modify, or export this variable.
+
+'MAKE_TERMOUT'
+'MAKE_TERMERR'
+     When 'make' starts it will check whether stdout and stderr will
+     show their output on a terminal.  If so, it will set 'MAKE_TERMOUT'
+     and 'MAKE_TERMERR', respectively, to the name of the terminal
+     device (or 'true' if this cannot be determined).  If set these
+     variables will be marked for export.  These variables will not be
+     changed by 'make' and they will not be modified if already set.
+
+     These values can be used (particularly in combination with output
+     synchronization (*note Output During Parallel Execution: Parallel
+     Output.) to determine whether 'make' itself is writing to a
+     terminal; they can be tested to decide whether to force recipe
+     commands to generate colorized output for example.
+
+     If you invoke a sub-'make' and redirect its stdout or stderr it is
+     your responsibility to reset or unexport these variables as well,
+     if your makefiles rely on them.
+
+'.RECIPEPREFIX'
+     The first character of the value of this variable is used as the
+     character make assumes is introducing a recipe line.  If the
+     variable is empty (as it is by default) that character is the
+     standard tab character.  For example, this is a valid makefile:
+
+          .RECIPEPREFIX = >
+          all:
+          > @echo Hello, world
+
+     The value of '.RECIPEPREFIX' can be changed multiple times; once
+     set it stays in effect for all rules parsed until it is modified.
+
+'.VARIABLES'
+     Expands to a list of the _names_ of all global variables defined so
+     far.  This includes variables which have empty values, as well as
+     built-in variables (*note Variables Used by Implicit Rules:
+     Implicit Variables.), but does not include any variables which are
+     only defined in a target-specific context.  Note that any value you
+     assign to this variable will be ignored; it will always return its
+     special value.
+
+'.FEATURES'
+     Expands to a list of special features supported by this version of
+     'make'.  Possible values include, but are not limited to:
+
+     'archives'
+          Supports 'ar' (archive) files using special file name syntax.
+          *Note Using 'make' to Update Archive Files: Archives.
+
+     'check-symlink'
+          Supports the '-L' ('--check-symlink-times') flag.  *Note
+          Summary of Options: Options Summary.
+
+     'else-if'
+          Supports "else if" non-nested conditionals.  *Note Syntax of
+          Conditionals: Conditional Syntax.
+
+     'jobserver'
+          Supports "job server" enhanced parallel builds.  *Note
+          Parallel Execution: Parallel.
+
+     'oneshell'
+          Supports the '.ONESHELL' special target.  *Note Using One
+          Shell: One Shell.
+
+     'order-only'
+          Supports order-only prerequisites.  *Note Types of
+          Prerequisites: Prerequisite Types.
+
+     'second-expansion'
+          Supports secondary expansion of prerequisite lists.
+
+     'shortest-stem'
+          Uses the "shortest stem" method of choosing which pattern, of
+          multiple applicable options, will be used.  *Note How Patterns
+          Match: Pattern Match.
+
+     'target-specific'
+          Supports target-specific and pattern-specific variable
+          assignments.  *Note Target-specific Variable Values:
+          Target-specific.
+
+     'undefine'
+          Supports the 'undefine' directive.  *Note Undefine
+          Directive::.
+
+     'guile'
+          Has GNU Guile available as an embedded extension language.
+          *Note GNU Guile Integration: Guile Integration.
+
+     'load'
+          Supports dynamically loadable objects for creating custom
+          extensions.  *Note Loading Dynamic Objects: Loading Objects.
+
+'.INCLUDE_DIRS'
+     Expands to a list of directories that 'make' searches for included
+     makefiles (*note Including Other Makefiles: Include.).
+
+
+File: make.info,  Node: Conditionals,  Next: Functions,  Prev: Using Variables,  Up: Top
+
+7 Conditional Parts of Makefiles
+********************************
+
+A "conditional" directive causes part of a makefile to be obeyed or
+ignored depending on the values of variables.  Conditionals can compare
+the value of one variable to another, or the value of a variable to a
+constant string.  Conditionals control what 'make' actually "sees" in
+the makefile, so they _cannot_ be used to control recipes at the time of
+execution.
+
+* Menu:
+
+* Conditional Example::         Example of a conditional
+* Conditional Syntax::          The syntax of conditionals.
+* Testing Flags::               Conditionals that test flags.
+
+
+File: make.info,  Node: Conditional Example,  Next: Conditional Syntax,  Prev: Conditionals,  Up: Conditionals
+
+7.1 Example of a Conditional
+============================
+
+The following example of a conditional tells 'make' to use one set of
+libraries if the 'CC' variable is 'gcc', and a different set of
+libraries otherwise.  It works by controlling which of two recipe lines
+will be used for the rule.  The result is that 'CC=gcc' as an argument
+to 'make' changes not only which compiler is used but also which
+libraries are linked.
+
+     libs_for_gcc = -lgnu
+     normal_libs =
+
+     foo: $(objects)
+     ifeq ($(CC),gcc)
+             $(CC) -o foo $(objects) $(libs_for_gcc)
+     else
+             $(CC) -o foo $(objects) $(normal_libs)
+     endif
+
+   This conditional uses three directives: one 'ifeq', one 'else' and
+one 'endif'.
+
+   The 'ifeq' directive begins the conditional, and specifies the
+condition.  It contains two arguments, separated by a comma and
+surrounded by parentheses.  Variable substitution is performed on both
+arguments and then they are compared.  The lines of the makefile
+following the 'ifeq' are obeyed if the two arguments match; otherwise
+they are ignored.
+
+   The 'else' directive causes the following lines to be obeyed if the
+previous conditional failed.  In the example above, this means that the
+second alternative linking command is used whenever the first
+alternative is not used.  It is optional to have an 'else' in a
+conditional.
+
+   The 'endif' directive ends the conditional.  Every conditional must
+end with an 'endif'.  Unconditional makefile text follows.
+
+   As this example illustrates, conditionals work at the textual level:
+the lines of the conditional are treated as part of the makefile, or
+ignored, according to the condition.  This is why the larger syntactic
+units of the makefile, such as rules, may cross the beginning or the end
+of the conditional.
+
+   When the variable 'CC' has the value 'gcc', the above example has
+this effect:
+
+     foo: $(objects)
+             $(CC) -o foo $(objects) $(libs_for_gcc)
+
+When the variable 'CC' has any other value, the effect is this:
+
+     foo: $(objects)
+             $(CC) -o foo $(objects) $(normal_libs)
+
+   Equivalent results can be obtained in another way by conditionalizing
+a variable assignment and then using the variable unconditionally:
+
+     libs_for_gcc = -lgnu
+     normal_libs =
+
+     ifeq ($(CC),gcc)
+       libs=$(libs_for_gcc)
+     else
+       libs=$(normal_libs)
+     endif
+
+     foo: $(objects)
+             $(CC) -o foo $(objects) $(libs)
+
+
+File: make.info,  Node: Conditional Syntax,  Next: Testing Flags,  Prev: Conditional Example,  Up: Conditionals
+
+7.2 Syntax of Conditionals
+==========================
+
+The syntax of a simple conditional with no 'else' is as follows:
+
+     CONDITIONAL-DIRECTIVE
+     TEXT-IF-TRUE
+     endif
+
+The TEXT-IF-TRUE may be any lines of text, to be considered as part of
+the makefile if the condition is true.  If the condition is false, no
+text is used instead.
+
+   The syntax of a complex conditional is as follows:
+
+     CONDITIONAL-DIRECTIVE
+     TEXT-IF-TRUE
+     else
+     TEXT-IF-FALSE
+     endif
+
+   or:
+
+     CONDITIONAL-DIRECTIVE-ONE
+     TEXT-IF-ONE-IS-TRUE
+     else CONDITIONAL-DIRECTIVE-TWO
+     TEXT-IF-TWO-IS-TRUE
+     else
+     TEXT-IF-ONE-AND-TWO-ARE-FALSE
+     endif
+
+There can be as many "'else' CONDITIONAL-DIRECTIVE" clauses as
+necessary.  Once a given condition is true, TEXT-IF-TRUE is used and no
+other clause is used; if no condition is true then TEXT-IF-FALSE is
+used.  The TEXT-IF-TRUE and TEXT-IF-FALSE can be any number of lines of
+text.
+
+   The syntax of the CONDITIONAL-DIRECTIVE is the same whether the
+conditional is simple or complex; after an 'else' or not.  There are
+four different directives that test different conditions.  Here is a
+table of them:
+
+'ifeq (ARG1, ARG2)'
+'ifeq 'ARG1' 'ARG2''
+'ifeq "ARG1" "ARG2"'
+'ifeq "ARG1" 'ARG2''
+'ifeq 'ARG1' "ARG2"'
+     Expand all variable references in ARG1 and ARG2 and compare them.
+     If they are identical, the TEXT-IF-TRUE is effective; otherwise,
+     the TEXT-IF-FALSE, if any, is effective.
+
+     Often you want to test if a variable has a non-empty value.  When
+     the value results from complex expansions of variables and
+     functions, expansions you would consider empty may actually contain
+     whitespace characters and thus are not seen as empty.  However, you
+     can use the 'strip' function (*note Text Functions::) to avoid
+     interpreting whitespace as a non-empty value.  For example:
+
+          ifeq ($(strip $(foo)),)
+          TEXT-IF-EMPTY
+          endif
+
+     will evaluate TEXT-IF-EMPTY even if the expansion of '$(foo)'
+     contains whitespace characters.
+
+'ifneq (ARG1, ARG2)'
+'ifneq 'ARG1' 'ARG2''
+'ifneq "ARG1" "ARG2"'
+'ifneq "ARG1" 'ARG2''
+'ifneq 'ARG1' "ARG2"'
+     Expand all variable references in ARG1 and ARG2 and compare them.
+     If they are different, the TEXT-IF-TRUE is effective; otherwise,
+     the TEXT-IF-FALSE, if any, is effective.
+
+'ifdef VARIABLE-NAME'
+     The 'ifdef' form takes the _name_ of a variable as its argument,
+     not a reference to a variable.  If the value of that variable has a
+     non-empty value, the TEXT-IF-TRUE is effective; otherwise, the
+     TEXT-IF-FALSE, if any, is effective.  Variables that have never
+     been defined have an empty value.  The text VARIABLE-NAME is
+     expanded, so it could be a variable or function that expands to the
+     name of a variable.  For example:
+
+          bar = true
+          foo = bar
+          ifdef $(foo)
+          frobozz = yes
+          endif
+
+     The variable reference '$(foo)' is expanded, yielding 'bar', which
+     is considered to be the name of a variable.  The variable 'bar' is
+     not expanded, but its value is examined to determine if it is
+     non-empty.
+
+     Note that 'ifdef' only tests whether a variable has a value.  It
+     does not expand the variable to see if that value is nonempty.
+     Consequently, tests using 'ifdef' return true for all definitions
+     except those like 'foo ='.  To test for an empty value, use
+     'ifeq ($(foo),)'.  For example,
+
+          bar =
+          foo = $(bar)
+          ifdef foo
+          frobozz = yes
+          else
+          frobozz = no
+          endif
+
+     sets 'frobozz' to 'yes', while:
+
+          foo =
+          ifdef foo
+          frobozz = yes
+          else
+          frobozz = no
+          endif
+
+     sets 'frobozz' to 'no'.
+
+'ifndef VARIABLE-NAME'
+     If the variable VARIABLE-NAME has an empty value, the TEXT-IF-TRUE
+     is effective; otherwise, the TEXT-IF-FALSE, if any, is effective.
+     The rules for expansion and testing of VARIABLE-NAME are identical
+     to the 'ifdef' directive.
+
+   Extra spaces are allowed and ignored at the beginning of the
+conditional directive line, but a tab is not allowed.  (If the line
+begins with a tab, it will be considered part of a recipe for a rule.)
+Aside from this, extra spaces or tabs may be inserted with no effect
+anywhere except within the directive name or within an argument.  A
+comment starting with '#' may appear at the end of the line.
+
+   The other two directives that play a part in a conditional are 'else'
+and 'endif'.  Each of these directives is written as one word, with no
+arguments.  Extra spaces are allowed and ignored at the beginning of the
+line, and spaces or tabs at the end.  A comment starting with '#' may
+appear at the end of the line.
+
+   Conditionals affect which lines of the makefile 'make' uses.  If the
+condition is true, 'make' reads the lines of the TEXT-IF-TRUE as part of
+the makefile; if the condition is false, 'make' ignores those lines
+completely.  It follows that syntactic units of the makefile, such as
+rules, may safely be split across the beginning or the end of the
+conditional.
+
+   'make' evaluates conditionals when it reads a makefile.
+Consequently, you cannot use automatic variables in the tests of
+conditionals because they are not defined until recipes are run (*note
+Automatic Variables::).
+
+   To prevent intolerable confusion, it is not permitted to start a
+conditional in one makefile and end it in another.  However, you may
+write an 'include' directive within a conditional, provided you do not
+attempt to terminate the conditional inside the included file.
+
+
+File: make.info,  Node: Testing Flags,  Prev: Conditional Syntax,  Up: Conditionals
+
+7.3 Conditionals that Test Flags
+================================
+
+You can write a conditional that tests 'make' command flags such as '-t'
+by using the variable 'MAKEFLAGS' together with the 'findstring'
+function (*note Functions for String Substitution and Analysis: Text
+Functions.).  This is useful when 'touch' is not enough to make a file
+appear up to date.
+
+   The 'findstring' function determines whether one string appears as a
+substring of another.  If you want to test for the '-t' flag, use 't' as
+the first string and the value of 'MAKEFLAGS' as the other.
+
+   For example, here is how to arrange to use 'ranlib -t' to finish
+marking an archive file up to date:
+
+     archive.a: ...
+     ifneq (,$(findstring t,$(MAKEFLAGS)))
+             +touch archive.a
+             +ranlib -t archive.a
+     else
+             ranlib archive.a
+     endif
+
+The '+' prefix marks those recipe lines as "recursive" so that they will
+be executed despite use of the '-t' flag.  *Note Recursive Use of
+'make': Recursion.
+
+
+File: make.info,  Node: Functions,  Next: Running,  Prev: Conditionals,  Up: Top
+
+8 Functions for Transforming Text
+*********************************
+
+"Functions" allow you to do text processing in the makefile to compute
+the files to operate on or the commands to use in recipes.  You use a
+function in a "function call", where you give the name of the function
+and some text (the "arguments") for the function to operate on.  The
+result of the function's processing is substituted into the makefile at
+the point of the call, just as a variable might be substituted.
+
+* Menu:
+
+* Syntax of Functions::         How to write a function call.
+* Text Functions::              General-purpose text manipulation functions.
+* File Name Functions::         Functions for manipulating file names.
+* Conditional Functions::       Functions that implement conditions.
+* Foreach Function::            Repeat some text with controlled variation.
+* File Function::               Write text to a file.
+* Call Function::               Expand a user-defined function.
+* Value Function::              Return the un-expanded value of a variable.
+* Eval Function::               Evaluate the arguments as makefile syntax.
+* Origin Function::             Find where a variable got its value.
+* Flavor Function::             Find out the flavor of a variable.
+* Make Control Functions::      Functions that control how make runs.
+* Shell Function::              Substitute the output of a shell command.
+* Guile Function::              Use GNU Guile embedded scripting language.
+
+
+File: make.info,  Node: Syntax of Functions,  Next: Text Functions,  Prev: Functions,  Up: Functions
+
+8.1 Function Call Syntax
+========================
+
+A function call resembles a variable reference.  It can appear anywhere
+a variable reference can appear, and it is expanded using the same rules
+as variable references.  A function call looks like this:
+
+     $(FUNCTION ARGUMENTS)
+
+or like this:
+
+     ${FUNCTION ARGUMENTS}
+
+   Here FUNCTION is a function name; one of a short list of names that
+are part of 'make'.  You can also essentially create your own functions
+by using the 'call' built-in function.
+
+   The ARGUMENTS are the arguments of the function.  They are separated
+from the function name by one or more spaces or tabs, and if there is
+more than one argument, then they are separated by commas.  Such
+whitespace and commas are not part of an argument's value.  The
+delimiters which you use to surround the function call, whether
+parentheses or braces, can appear in an argument only in matching pairs;
+the other kind of delimiters may appear singly.  If the arguments
+themselves contain other function calls or variable references, it is
+wisest to use the same kind of delimiters for all the references; write
+'$(subst a,b,$(x))', not '$(subst a,b,${x})'.  This is because it is
+clearer, and because only one type of delimiter is matched to find the
+end of the reference.
+
+   The text written for each argument is processed by substitution of
+variables and function calls to produce the argument value, which is the
+text on which the function acts.  The substitution is done in the order
+in which the arguments appear.
+
+   Commas and unmatched parentheses or braces cannot appear in the text
+of an argument as written; leading spaces cannot appear in the text of
+the first argument as written.  These characters can be put into the
+argument value by variable substitution.  First define variables 'comma'
+and 'space' whose values are isolated comma and space characters, then
+substitute these variables where such characters are wanted, like this:
+
+     comma:= ,
+     empty:=
+     space:= $(empty) $(empty)
+     foo:= a b c
+     bar:= $(subst $(space),$(comma),$(foo))
+     # bar is now 'a,b,c'.
+
+Here the 'subst' function replaces each space with a comma, through the
+value of 'foo', and substitutes the result.
+
+
+File: make.info,  Node: Text Functions,  Next: File Name Functions,  Prev: Syntax of Functions,  Up: Functions
+
+8.2 Functions for String Substitution and Analysis
+==================================================
+
+Here are some functions that operate on strings:
+
+'$(subst FROM,TO,TEXT)'
+     Performs a textual replacement on the text TEXT: each occurrence of
+     FROM is replaced by TO.  The result is substituted for the function
+     call.  For example,
+
+          $(subst ee,EE,feet on the street)
+
+     substitutes the string 'fEEt on the strEEt'.
+
+'$(patsubst PATTERN,REPLACEMENT,TEXT)'
+     Finds whitespace-separated words in TEXT that match PATTERN and
+     replaces them with REPLACEMENT.  Here PATTERN may contain a '%'
+     which acts as a wildcard, matching any number of any characters
+     within a word.  If REPLACEMENT also contains a '%', the '%' is
+     replaced by the text that matched the '%' in PATTERN.  Only the
+     first '%' in the PATTERN and REPLACEMENT is treated this way; any
+     subsequent '%' is unchanged.
+
+     '%' characters in 'patsubst' function invocations can be quoted
+     with preceding backslashes ('\').  Backslashes that would otherwise
+     quote '%' characters can be quoted with more backslashes.
+     Backslashes that quote '%' characters or other backslashes are
+     removed from the pattern before it is compared file names or has a
+     stem substituted into it.  Backslashes that are not in danger of
+     quoting '%' characters go unmolested.  For example, the pattern
+     'the\%weird\\%pattern\\' has 'the%weird\' preceding the operative
+     '%' character, and 'pattern\\' following it.  The final two
+     backslashes are left alone because they cannot affect any '%'
+     character.
+
+     Whitespace between words is folded into single space characters;
+     leading and trailing whitespace is discarded.
+
+     For example,
+
+          $(patsubst %.c,%.o,x.c.c bar.c)
+
+     produces the value 'x.c.o bar.o'.
+
+     Substitution references (*note Substitution References:
+     Substitution Refs.) are a simpler way to get the effect of the
+     'patsubst' function:
+
+          $(VAR:PATTERN=REPLACEMENT)
+
+     is equivalent to
+
+          $(patsubst PATTERN,REPLACEMENT,$(VAR))
+
+     The second shorthand simplifies one of the most common uses of
+     'patsubst': replacing the suffix at the end of file names.
+
+          $(VAR:SUFFIX=REPLACEMENT)
+
+     is equivalent to
+
+          $(patsubst %SUFFIX,%REPLACEMENT,$(VAR))
+
+     For example, you might have a list of object files:
+
+          objects = foo.o bar.o baz.o
+
+     To get the list of corresponding source files, you could simply
+     write:
+
+          $(objects:.o=.c)
+
+     instead of using the general form:
+
+          $(patsubst %.o,%.c,$(objects))
+
+'$(strip STRING)'
+     Removes leading and trailing whitespace from STRING and replaces
+     each internal sequence of one or more whitespace characters with a
+     single space.  Thus, '$(strip a b c )' results in 'a b c'.
+
+     The function 'strip' can be very useful when used in conjunction
+     with conditionals.  When comparing something with the empty string
+     '' using 'ifeq' or 'ifneq', you usually want a string of just
+     whitespace to match the empty string (*note Conditionals::).
+
+     Thus, the following may fail to have the desired results:
+
+          .PHONY: all
+          ifneq   "$(needs_made)" ""
+          all: $(needs_made)
+          else
+          all:;@echo 'Nothing to make!'
+          endif
+
+     Replacing the variable reference '$(needs_made)' with the function
+     call '$(strip $(needs_made))' in the 'ifneq' directive would make
+     it more robust.
+
+'$(findstring FIND,IN)'
+     Searches IN for an occurrence of FIND.  If it occurs, the value is
+     FIND; otherwise, the value is empty.  You can use this function in
+     a conditional to test for the presence of a specific substring in a
+     given string.  Thus, the two examples,
+
+          $(findstring a,a b c)
+          $(findstring a,b c)
+
+     produce the values 'a' and '' (the empty string), respectively.
+     *Note Testing Flags::, for a practical application of 'findstring'.
+
+'$(filter PATTERN...,TEXT)'
+     Returns all whitespace-separated words in TEXT that _do_ match any
+     of the PATTERN words, removing any words that _do not_ match.  The
+     patterns are written using '%', just like the patterns used in the
+     'patsubst' function above.
+
+     The 'filter' function can be used to separate out different types
+     of strings (such as file names) in a variable.  For example:
+
+          sources := foo.c bar.c baz.s ugh.h
+          foo: $(sources)
+                  cc $(filter %.c %.s,$(sources)) -o foo
+
+     says that 'foo' depends of 'foo.c', 'bar.c', 'baz.s' and 'ugh.h'
+     but only 'foo.c', 'bar.c' and 'baz.s' should be specified in the
+     command to the compiler.
+
+'$(filter-out PATTERN...,TEXT)'
+     Returns all whitespace-separated words in TEXT that _do not_ match
+     any of the PATTERN words, removing the words that _do_ match one or
+     more.  This is the exact opposite of the 'filter' function.
+
+     For example, given:
+
+          objects=main1.o foo.o main2.o bar.o
+          mains=main1.o main2.o
+
+     the following generates a list which contains all the object files
+     not in 'mains':
+
+          $(filter-out $(mains),$(objects))
+
+'$(sort LIST)'
+     Sorts the words of LIST in lexical order, removing duplicate words.
+     The output is a list of words separated by single spaces.  Thus,
+
+          $(sort foo bar lose)
+
+     returns the value 'bar foo lose'.
+
+     Incidentally, since 'sort' removes duplicate words, you can use it
+     for this purpose even if you don't care about the sort order.
+
+'$(word N,TEXT)'
+     Returns the Nth word of TEXT.  The legitimate values of N start
+     from 1.  If N is bigger than the number of words in TEXT, the value
+     is empty.  For example,
+
+          $(word 2, foo bar baz)
+
+     returns 'bar'.
+
+'$(wordlist S,E,TEXT)'
+     Returns the list of words in TEXT starting with word S and ending
+     with word E (inclusive).  The legitimate values of S start from 1;
+     E may start from 0.  If S is bigger than the number of words in
+     TEXT, the value is empty.  If E is bigger than the number of words
+     in TEXT, words up to the end of TEXT are returned.  If S is greater
+     than E, nothing is returned.  For example,
+
+          $(wordlist 2, 3, foo bar baz)
+
+     returns 'bar baz'.
+
+'$(words TEXT)'
+     Returns the number of words in TEXT.  Thus, the last word of TEXT
+     is '$(word $(words TEXT),TEXT)'.
+
+'$(firstword NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace.  The value is the first name in the series.  The rest
+     of the names are ignored.
+
+     For example,
+
+          $(firstword foo bar)
+
+     produces the result 'foo'.  Although '$(firstword TEXT)' is the
+     same as '$(word 1,TEXT)', the 'firstword' function is retained for
+     its simplicity.
+
+'$(lastword NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace.  The value is the last name in the series.
+
+     For example,
+
+          $(lastword foo bar)
+
+     produces the result 'bar'.  Although '$(lastword TEXT)' is the same
+     as '$(word $(words TEXT),TEXT)', the 'lastword' function was added
+     for its simplicity and better performance.
+
+   Here is a realistic example of the use of 'subst' and 'patsubst'.
+Suppose that a makefile uses the 'VPATH' variable to specify a list of
+directories that 'make' should search for prerequisite files (*note
+'VPATH' Search Path for All Prerequisites: General Search.).  This
+example shows how to tell the C compiler to search for header files in
+the same list of directories.
+
+   The value of 'VPATH' is a list of directories separated by colons,
+such as 'src:../headers'.  First, the 'subst' function is used to change
+the colons to spaces:
+
+     $(subst :, ,$(VPATH))
+
+This produces 'src ../headers'.  Then 'patsubst' is used to turn each
+directory name into a '-I' flag.  These can be added to the value of the
+variable 'CFLAGS', which is passed automatically to the C compiler, like
+this:
+
+     override CFLAGS += $(patsubst %,-I%,$(subst :, ,$(VPATH)))
+
+The effect is to append the text '-Isrc -I../headers' to the previously
+given value of 'CFLAGS'.  The 'override' directive is used so that the
+new value is assigned even if the previous value of 'CFLAGS' was
+specified with a command argument (*note The 'override' Directive:
+Override Directive.).
+
+
+File: make.info,  Node: File Name Functions,  Next: Conditional Functions,  Prev: Text Functions,  Up: Functions
+
+8.3 Functions for File Names
+============================
+
+Several of the built-in expansion functions relate specifically to
+taking apart file names or lists of file names.
+
+   Each of the following functions performs a specific transformation on
+a file name.  The argument of the function is regarded as a series of
+file names, separated by whitespace.  (Leading and trailing whitespace
+is ignored.)  Each file name in the series is transformed in the same
+way and the results are concatenated with single spaces between them.
+
+'$(dir NAMES...)'
+     Extracts the directory-part of each file name in NAMES.  The
+     directory-part of the file name is everything up through (and
+     including) the last slash in it.  If the file name contains no
+     slash, the directory part is the string './'.  For example,
+
+          $(dir src/foo.c hacks)
+
+     produces the result 'src/ ./'.
+
+'$(notdir NAMES...)'
+     Extracts all but the directory-part of each file name in NAMES.  If
+     the file name contains no slash, it is left unchanged.  Otherwise,
+     everything through the last slash is removed from it.
+
+     A file name that ends with a slash becomes an empty string.  This
+     is unfortunate, because it means that the result does not always
+     have the same number of whitespace-separated file names as the
+     argument had; but we do not see any other valid alternative.
+
+     For example,
+
+          $(notdir src/foo.c hacks)
+
+     produces the result 'foo.c hacks'.
+
+'$(suffix NAMES...)'
+     Extracts the suffix of each file name in NAMES.  If the file name
+     contains a period, the suffix is everything starting with the last
+     period.  Otherwise, the suffix is the empty string.  This
+     frequently means that the result will be empty when NAMES is not,
+     and if NAMES contains multiple file names, the result may contain
+     fewer file names.
+
+     For example,
+
+          $(suffix src/foo.c src-1.0/bar.c hacks)
+
+     produces the result '.c .c'.
+
+'$(basename NAMES...)'
+     Extracts all but the suffix of each file name in NAMES.  If the
+     file name contains a period, the basename is everything starting up
+     to (and not including) the last period.  Periods in the directory
+     part are ignored.  If there is no period, the basename is the
+     entire file name.  For example,
+
+          $(basename src/foo.c src-1.0/bar hacks)
+
+     produces the result 'src/foo src-1.0/bar hacks'.
+
+'$(addsuffix SUFFIX,NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace; SUFFIX is used as a unit.  The value of SUFFIX is
+     appended to the end of each individual name and the resulting
+     larger names are concatenated with single spaces between them.  For
+     example,
+
+          $(addsuffix .c,foo bar)
+
+     produces the result 'foo.c bar.c'.
+
+'$(addprefix PREFIX,NAMES...)'
+     The argument NAMES is regarded as a series of names, separated by
+     whitespace; PREFIX is used as a unit.  The value of PREFIX is
+     prepended to the front of each individual name and the resulting
+     larger names are concatenated with single spaces between them.  For
+     example,
+
+          $(addprefix src/,foo bar)
+
+     produces the result 'src/foo src/bar'.
+
+'$(join LIST1,LIST2)'
+     Concatenates the two arguments word by word: the two first words
+     (one from each argument) concatenated form the first word of the
+     result, the two second words form the second word of the result,
+     and so on.  So the Nth word of the result comes from the Nth word
+     of each argument.  If one argument has more words that the other,
+     the extra words are copied unchanged into the result.
+
+     For example, '$(join a b,.c .o)' produces 'a.c b.o'.
+
+     Whitespace between the words in the lists is not preserved; it is
+     replaced with a single space.
+
+     This function can merge the results of the 'dir' and 'notdir'
+     functions, to produce the original list of files which was given to
+     those two functions.
+
+'$(wildcard PATTERN)'
+     The argument PATTERN is a file name pattern, typically containing
+     wildcard characters (as in shell file name patterns).  The result
+     of 'wildcard' is a space-separated list of the names of existing
+     files that match the pattern.  *Note Using Wildcard Characters in
+     File Names: Wildcards.
+
+'$(realpath NAMES...)'
+     For each file name in NAMES return the canonical absolute name.  A
+     canonical name does not contain any '.' or '..' components, nor any
+     repeated path separators ('/') or symlinks.  In case of a failure
+     the empty string is returned.  Consult the 'realpath(3)'
+     documentation for a list of possible failure causes.
+
+'$(abspath NAMES...)'
+     For each file name in NAMES return an absolute name that does not
+     contain any '.' or '..' components, nor any repeated path
+     separators ('/').  Note that, in contrast to 'realpath' function,
+     'abspath' does not resolve symlinks and does not require the file
+     names to refer to an existing file or directory.  Use the
+     'wildcard' function to test for existence.
+
+
+File: make.info,  Node: Conditional Functions,  Next: Foreach Function,  Prev: File Name Functions,  Up: Functions
+
+8.4 Functions for Conditionals
+==============================
+
+There are three functions that provide conditional expansion.  A key
+aspect of these functions is that not all of the arguments are expanded
+initially.  Only those arguments which need to be expanded, will be
+expanded.
+
+'$(if CONDITION,THEN-PART[,ELSE-PART])'
+     The 'if' function provides support for conditional expansion in a
+     functional context (as opposed to the GNU 'make' makefile
+     conditionals such as 'ifeq' (*note Syntax of Conditionals:
+     Conditional Syntax.).
+
+     The first argument, CONDITION, first has all preceding and trailing
+     whitespace stripped, then is expanded.  If it expands to any
+     non-empty string, then the condition is considered to be true.  If
+     it expands to an empty string, the condition is considered to be
+     false.
+
+     If the condition is true then the second argument, THEN-PART, is
+     evaluated and this is used as the result of the evaluation of the
+     entire 'if' function.
+
+     If the condition is false then the third argument, ELSE-PART, is
+     evaluated and this is the result of the 'if' function.  If there is
+     no third argument, the 'if' function evaluates to nothing (the
+     empty string).
+
+     Note that only one of the THEN-PART or the ELSE-PART will be
+     evaluated, never both.  Thus, either can contain side-effects (such
+     as 'shell' function calls, etc.)
+
+'$(or CONDITION1[,CONDITION2[,CONDITION3...]])'
+     The 'or' function provides a "short-circuiting" OR operation.  Each
+     argument is expanded, in order.  If an argument expands to a
+     non-empty string the processing stops and the result of the
+     expansion is that string.  If, after all arguments are expanded,
+     all of them are false (empty), then the result of the expansion is
+     the empty string.
+
+'$(and CONDITION1[,CONDITION2[,CONDITION3...]])'
+     The 'and' function provides a "short-circuiting" AND operation.
+     Each argument is expanded, in order.  If an argument expands to an
+     empty string the processing stops and the result of the expansion
+     is the empty string.  If all arguments expand to a non-empty string
+     then the result of the expansion is the expansion of the last
+     argument.
+
+
+File: make.info,  Node: Foreach Function,  Next: File Function,  Prev: Conditional Functions,  Up: Functions
+
+8.5 The 'foreach' Function
+==========================
+
+The 'foreach' function is very different from other functions.  It
+causes one piece of text to be used repeatedly, each time with a
+different substitution performed on it.  It resembles the 'for' command
+in the shell 'sh' and the 'foreach' command in the C-shell 'csh'.
+
+   The syntax of the 'foreach' function is:
+
+     $(foreach VAR,LIST,TEXT)
+
+The first two arguments, VAR and LIST, are expanded before anything else
+is done; note that the last argument, TEXT, is *not* expanded at the
+same time.  Then for each word of the expanded value of LIST, the
+variable named by the expanded value of VAR is set to that word, and
+TEXT is expanded.  Presumably TEXT contains references to that variable,
+so its expansion will be different each time.
+
+   The result is that TEXT is expanded as many times as there are
+whitespace-separated words in LIST.  The multiple expansions of TEXT are
+concatenated, with spaces between them, to make the result of 'foreach'.
+
+   This simple example sets the variable 'files' to the list of all
+files in the directories in the list 'dirs':
+
+     dirs := a b c d
+     files := $(foreach dir,$(dirs),$(wildcard $(dir)/*))
+
+   Here TEXT is '$(wildcard $(dir)/*)'.  The first repetition finds the
+value 'a' for 'dir', so it produces the same result as '$(wildcard
+a/*)'; the second repetition produces the result of '$(wildcard b/*)';
+and the third, that of '$(wildcard c/*)'.
+
+   This example has the same result (except for setting 'dirs') as the
+following example:
+
+     files := $(wildcard a/* b/* c/* d/*)
+
+   When TEXT is complicated, you can improve readability by giving it a
+name, with an additional variable:
+
+     find_files = $(wildcard $(dir)/*)
+     dirs := a b c d
+     files := $(foreach dir,$(dirs),$(find_files))
+
+Here we use the variable 'find_files' this way.  We use plain '=' to
+define a recursively-expanding variable, so that its value contains an
+actual function call to be re-expanded under the control of 'foreach'; a
+simply-expanded variable would not do, since 'wildcard' would be called
+only once at the time of defining 'find_files'.
+
+   The 'foreach' function has no permanent effect on the variable VAR;
+its value and flavor after the 'foreach' function call are the same as
+they were beforehand.  The other values which are taken from LIST are in
+effect only temporarily, during the execution of 'foreach'.  The
+variable VAR is a simply-expanded variable during the execution of
+'foreach'.  If VAR was undefined before the 'foreach' function call, it
+is undefined after the call.  *Note The Two Flavors of Variables:
+Flavors.
+
+   You must take care when using complex variable expressions that
+result in variable names because many strange things are valid variable
+names, but are probably not what you intended.  For example,
+
+     files := $(foreach Esta-escrito-en-espanol!,b c ch,$(find_files))
+
+might be useful if the value of 'find_files' references the variable
+whose name is 'Esta-escrito-en-espanol!' (es un nombre bastante largo,
+no?), but it is more likely to be a mistake.
+
+
+File: make.info,  Node: File Function,  Next: Call Function,  Prev: Foreach Function,  Up: Functions
+
+8.6 The 'file' Function
+=======================
+
+The 'file' function allows the makefile to write to or read from a file.
+Two modes of writing are supported: overwrite, where the text is written
+to the beginning of the file and any existing content is lost, and
+append, where the text is written to the end of the file, preserving the
+existing content.  In both cases the file is created if it does not
+exist.  It is a fatal error if the file cannot be opened for writing, or
+if the write operation fails.  The 'file' function expands to the empty
+string when writing to a file.
+
+   When reading from a file, the 'file' function expands to the verbatim
+contents of the file, except that the final newline (if there is one)
+will be stripped.  Attempting to read from a non-existent file expands
+to the empty string.
+
+   The syntax of the 'file' function is:
+
+     $(file OP FILENAME[,TEXT])
+
+   When the 'file' function is evaluated all its arguments are expanded
+first, then the file indicated by FILENAME will be opened in the mode
+described by OP.
+
+   The operator OP can be '>' to indicate the file will be overwritten
+with new content, '>>' to indicate the current contents of the file will
+be appended to, or '<' to indicate the contents of the file will be read
+in.  The FILENAME specifies the file to be written to or read from.
+There may optionally be whitespace between the operator and the file
+name.
+
+   When reading files, it is an error to provide a TEXT value.
+
+   When writing files, TEXT will be written to the file.  If TEXT does
+not already end in a newline a final newline will be written (even if
+TEXT is the empty string).  If the TEXT argument is not given at all,
+nothing will be written.
+
+   For example, the 'file' function can be useful if your build system
+has a limited command line size and your recipe runs a command that can
+accept arguments from a file as well.  Many commands use the convention
+that an argument prefixed with an '@' specifies a file containing more
+arguments.  Then you might write your recipe in this way:
+
+     program: $(OBJECTS)
+             $(file >$@.in,$^)
+             $(CMD) $(CMDFLAGS) @$@.in
+             @rm $@.in
+
+   If the command required each argument to be on a separate line of the
+input file, you might write your recipe like this:
+
+     program: $(OBJECTS)
+             $(file >$@.in) $(foreach O,$^,$(file >>$@.in,$O))
+             $(CMD) $(CMDFLAGS) @$@.in
+             @rm $@.in
+
+
+File: make.info,  Node: Call Function,  Next: Value Function,  Prev: File Function,  Up: Functions
+
+8.7 The 'call' Function
+=======================
+
+The 'call' function is unique in that it can be used to create new
+parameterized functions.  You can write a complex expression as the
+value of a variable, then use 'call' to expand it with different values.
+
+   The syntax of the 'call' function is:
+
+     $(call VARIABLE,PARAM,PARAM,...)
+
+   When 'make' expands this function, it assigns each PARAM to temporary
+variables '$(1)', '$(2)', etc.  The variable '$(0)' will contain
+VARIABLE.  There is no maximum number of parameter arguments.  There is
+no minimum, either, but it doesn't make sense to use 'call' with no
+parameters.
+
+   Then VARIABLE is expanded as a 'make' variable in the context of
+these temporary assignments.  Thus, any reference to '$(1)' in the value
+of VARIABLE will resolve to the first PARAM in the invocation of 'call'.
+
+   Note that VARIABLE is the _name_ of a variable, not a _reference_ to
+that variable.  Therefore you would not normally use a '$' or
+parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   If VARIABLE is the name of a built-in function, the built-in function
+is always invoked (even if a 'make' variable by that name also exists).
+
+   The 'call' function expands the PARAM arguments before assigning them
+to temporary variables.  This means that VARIABLE values containing
+references to built-in functions that have special expansion rules, like
+'foreach' or 'if', may not work as you expect.
+
+   Some examples may make this clearer.
+
+   This macro simply reverses its arguments:
+
+     reverse = $(2) $(1)
+
+     foo = $(call reverse,a,b)
+
+Here FOO will contain 'b a'.
+
+   This one is slightly more interesting: it defines a macro to search
+for the first instance of a program in 'PATH':
+
+     pathsearch = $(firstword $(wildcard $(addsuffix /$(1),$(subst :, ,$(PATH)))))
+
+     LS := $(call pathsearch,ls)
+
+Now the variable LS contains '/bin/ls' or similar.
+
+   The 'call' function can be nested.  Each recursive invocation gets
+its own local values for '$(1)', etc. that mask the values of
+higher-level 'call'.  For example, here is an implementation of a "map"
+function:
+
+     map = $(foreach a,$(2),$(call $(1),$(a)))
+
+   Now you can MAP a function that normally takes only one argument,
+such as 'origin', to multiple values in one step:
+
+     o = $(call map,origin,o map MAKE)
+
+   and end up with O containing something like 'file file default'.
+
+   A final caution: be careful when adding whitespace to the arguments
+to 'call'.  As with other functions, any whitespace contained in the
+second and subsequent arguments is kept; this can cause strange effects.
+It's generally safest to remove all extraneous whitespace when providing
+parameters to 'call'.
+
+
+File: make.info,  Node: Value Function,  Next: Eval Function,  Prev: Call Function,  Up: Functions
+
+8.8 The 'value' Function
+========================
+
+The 'value' function provides a way for you to use the value of a
+variable _without_ having it expanded.  Please note that this does not
+undo expansions which have already occurred; for example if you create a
+simply expanded variable its value is expanded during the definition; in
+that case the 'value' function will return the same result as using the
+variable directly.
+
+   The syntax of the 'value' function is:
+
+     $(value VARIABLE)
+
+   Note that VARIABLE is the _name_ of a variable, not a _reference_ to
+that variable.  Therefore you would not normally use a '$' or
+parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   The result of this function is a string containing the value of
+VARIABLE, without any expansion occurring.  For example, in this
+makefile:
+
+     FOO = $PATH
+
+     all:
+             @echo $(FOO)
+             @echo $(value FOO)
+
+The first output line would be 'ATH', since the "$P" would be expanded
+as a 'make' variable, while the second output line would be the current
+value of your '$PATH' environment variable, since the 'value' function
+avoided the expansion.
+
+   The 'value' function is most often used in conjunction with the
+'eval' function (*note Eval Function::).
+
+
+File: make.info,  Node: Eval Function,  Next: Origin Function,  Prev: Value Function,  Up: Functions
+
+8.9 The 'eval' Function
+=======================
+
+The 'eval' function is very special: it allows you to define new
+makefile constructs that are not constant; which are the result of
+evaluating other variables and functions.  The argument to the 'eval'
+function is expanded, then the results of that expansion are parsed as
+makefile syntax.  The expanded results can define new 'make' variables,
+targets, implicit or explicit rules, etc.
+
+   The result of the 'eval' function is always the empty string; thus,
+it can be placed virtually anywhere in a makefile without causing syntax
+errors.
+
+   It's important to realize that the 'eval' argument is expanded
+_twice_; first by the 'eval' function, then the results of that
+expansion are expanded again when they are parsed as makefile syntax.
+This means you may need to provide extra levels of escaping for "$"
+characters when using 'eval'.  The 'value' function (*note Value
+Function::) can sometimes be useful in these situations, to circumvent
+unwanted expansions.
+
+   Here is an example of how 'eval' can be used; this example combines a
+number of concepts and other functions.  Although it might seem overly
+complex to use 'eval' in this example, rather than just writing out the
+rules, consider two things: first, the template definition (in
+'PROGRAM_template') could need to be much more complex than it is here;
+and second, you might put the complex, "generic" part of this example
+into another makefile, then include it in all the individual makefiles.
+Now your individual makefiles are quite straightforward.
+
+     PROGRAMS    = server client
+
+     server_OBJS = server.o server_priv.o server_access.o
+     server_LIBS = priv protocol
+
+     client_OBJS = client.o client_api.o client_mem.o
+     client_LIBS = protocol
+
+     # Everything after this is generic
+
+     .PHONY: all
+     all: $(PROGRAMS)
+
+     define PROGRAM_template =
+      $(1): $$($(1)_OBJS) $$($(1)_LIBS:%=-l%)
+      ALL_OBJS   += $$($(1)_OBJS)
+     endef
+
+     $(foreach prog,$(PROGRAMS),$(eval $(call PROGRAM_template,$(prog))))
+
+     $(PROGRAMS):
+             $(LINK.o) $^ $(LDLIBS) -o $@
+
+     clean:
+             rm -f $(ALL_OBJS) $(PROGRAMS)
+
+
+File: make.info,  Node: Origin Function,  Next: Flavor Function,  Prev: Eval Function,  Up: Functions
+
+8.10 The 'origin' Function
+==========================
+
+The 'origin' function is unlike most other functions in that it does not
+operate on the values of variables; it tells you something _about_ a
+variable.  Specifically, it tells you where it came from.
+
+   The syntax of the 'origin' function is:
+
+     $(origin VARIABLE)
+
+   Note that VARIABLE is the _name_ of a variable to inquire about, not
+a _reference_ to that variable.  Therefore you would not normally use a
+'$' or parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   The result of this function is a string telling you how the variable
+VARIABLE was defined:
+
+'undefined'
+
+     if VARIABLE was never defined.
+
+'default'
+
+     if VARIABLE has a default definition, as is usual with 'CC' and so
+     on.  *Note Variables Used by Implicit Rules: Implicit Variables.
+     Note that if you have redefined a default variable, the 'origin'
+     function will return the origin of the later definition.
+
+'environment'
+
+     if VARIABLE was inherited from the environment provided to 'make'.
+
+'environment override'
+
+     if VARIABLE was inherited from the environment provided to 'make',
+     and is overriding a setting for VARIABLE in the makefile as a
+     result of the '-e' option (*note Summary of Options: Options
+     Summary.).
+
+'file'
+
+     if VARIABLE was defined in a makefile.
+
+'command line'
+
+     if VARIABLE was defined on the command line.
+
+'override'
+
+     if VARIABLE was defined with an 'override' directive in a makefile
+     (*note The 'override' Directive: Override Directive.).
+
+'automatic'
+
+     if VARIABLE is an automatic variable defined for the execution of
+     the recipe for each rule (*note Automatic Variables::).
+
+   This information is primarily useful (other than for your curiosity)
+to determine if you want to believe the value of a variable.  For
+example, suppose you have a makefile 'foo' that includes another
+makefile 'bar'.  You want a variable 'bletch' to be defined in 'bar' if
+you run the command 'make -f bar', even if the environment contains a
+definition of 'bletch'.  However, if 'foo' defined 'bletch' before
+including 'bar', you do not want to override that definition.  This
+could be done by using an 'override' directive in 'foo', giving that
+definition precedence over the later definition in 'bar'; unfortunately,
+the 'override' directive would also override any command line
+definitions.  So, 'bar' could include:
+
+     ifdef bletch
+     ifeq "$(origin bletch)" "environment"
+     bletch = barf, gag, etc.
+     endif
+     endif
+
+If 'bletch' has been defined from the environment, this will redefine
+it.
+
+   If you want to override a previous definition of 'bletch' if it came
+from the environment, even under '-e', you could instead write:
+
+     ifneq "$(findstring environment,$(origin bletch))" ""
+     bletch = barf, gag, etc.
+     endif
+
+   Here the redefinition takes place if '$(origin bletch)' returns
+either 'environment' or 'environment override'.  *Note Functions for
+String Substitution and Analysis: Text Functions.
+
+
+File: make.info,  Node: Flavor Function,  Next: Make Control Functions,  Prev: Origin Function,  Up: Functions
+
+8.11 The 'flavor' Function
+==========================
+
+The 'flavor' function, like the 'origin' function, does not operate on
+the values of variables but rather it tells you something _about_ a
+variable.  Specifically, it tells you the flavor of a variable (*note
+The Two Flavors of Variables: Flavors.).
+
+   The syntax of the 'flavor' function is:
+
+     $(flavor VARIABLE)
+
+   Note that VARIABLE is the _name_ of a variable to inquire about, not
+a _reference_ to that variable.  Therefore you would not normally use a
+'$' or parentheses when writing it.  (You can, however, use a variable
+reference in the name if you want the name not to be a constant.)
+
+   The result of this function is a string that identifies the flavor of
+the variable VARIABLE:
+
+'undefined'
+
+     if VARIABLE was never defined.
+
+'recursive'
+
+     if VARIABLE is a recursively expanded variable.
+
+'simple'
+
+     if VARIABLE is a simply expanded variable.
+
+
+File: make.info,  Node: Make Control Functions,  Next: Shell Function,  Prev: Flavor Function,  Up: Functions
+
+8.12 Functions That Control Make
+================================
+
+These functions control the way make runs.  Generally, they are used to
+provide information to the user of the makefile or to cause make to stop
+if some sort of environmental error is detected.
+
+'$(error TEXT...)'
+     Generates a fatal error where the message is TEXT.  Note that the
+     error is generated whenever this function is evaluated.  So, if you
+     put it inside a recipe or on the right side of a recursive variable
+     assignment, it won't be evaluated until later.  The TEXT will be
+     expanded before the error is generated.
+
+     For example,
+
+          ifdef ERROR1
+          $(error error is $(ERROR1))
+          endif
+
+     will generate a fatal error during the read of the makefile if the
+     'make' variable 'ERROR1' is defined.  Or,
+
+          ERR = $(error found an error!)
+
+          .PHONY: err
+          err: ; $(ERR)
+
+     will generate a fatal error while 'make' is running, if the 'err'
+     target is invoked.
+
+'$(warning TEXT...)'
+     This function works similarly to the 'error' function, above,
+     except that 'make' doesn't exit.  Instead, TEXT is expanded and the
+     resulting message is displayed, but processing of the makefile
+     continues.
+
+     The result of the expansion of this function is the empty string.
+
+'$(info TEXT...)'
+     This function does nothing more than print its (expanded)
+     argument(s) to standard output.  No makefile name or line number is
+     added.  The result of the expansion of this function is the empty
+     string.
+
+
+File: make.info,  Node: Shell Function,  Next: Guile Function,  Prev: Make Control Functions,  Up: Functions
+
+8.13 The 'shell' Function
+=========================
+
+The 'shell' function is unlike any other function other than the
+'wildcard' function (*note The Function 'wildcard': Wildcard Function.)
+in that it communicates with the world outside of 'make'.
+
+   The 'shell' function performs the same function that backquotes ('`')
+perform in most shells: it does "command expansion".  This means that it
+takes as an argument a shell command and evaluates to the output of the
+command.  The only processing 'make' does on the result is to convert
+each newline (or carriage-return / newline pair) to a single space.  If
+there is a trailing (carriage-return and) newline it will simply be
+removed.
+
+   The commands run by calls to the 'shell' function are run when the
+function calls are expanded (*note How 'make' Reads a Makefile: Reading
+Makefiles.).  Because this function involves spawning a new shell, you
+should carefully consider the performance implications of using the
+'shell' function within recursively expanded variables vs. simply
+expanded variables (*note The Two Flavors of Variables: Flavors.).
+
+   After the 'shell' function or '!=' assignment operator is used, its
+exit status is placed in the '.SHELLSTATUS' variable.
+
+   Here are some examples of the use of the 'shell' function:
+
+     contents := $(shell cat foo)
+
+sets 'contents' to the contents of the file 'foo', with a space (rather
+than a newline) separating each line.
+
+     files := $(shell echo *.c)
+
+sets 'files' to the expansion of '*.c'.  Unless 'make' is using a very
+strange shell, this has the same result as '$(wildcard *.c)' (as long as
+at least one '.c' file exists).
+
+
+File: make.info,  Node: Guile Function,  Prev: Shell Function,  Up: Functions
+
+8.14 The 'guile' Function
+=========================
+
+If GNU 'make' is built with support for GNU Guile as an embedded
+extension language then the 'guile' function will be available.  The
+'guile' function takes one argument which is first expanded by 'make' in
+the normal fashion, then passed to the GNU Guile evaluator.  The result
+of the evaluator is converted into a string and used as the expansion of
+the 'guile' function in the makefile.  See *note GNU Guile Integration:
+Guile Integration. for details on writing extensions to 'make' in Guile.
+
+   You can determine whether GNU Guile support is available by checking
+the '.FEATURES' variable for the word GUILE.
+
+
+File: make.info,  Node: Running,  Next: Implicit Rules,  Prev: Functions,  Up: Top
+
+9 How to Run 'make'
+*******************
+
+A makefile that says how to recompile a program can be used in more than
+one way.  The simplest use is to recompile every file that is out of
+date.  Usually, makefiles are written so that if you run 'make' with no
+arguments, it does just that.
+
+   But you might want to update only some of the files; you might want
+to use a different compiler or different compiler options; you might
+want just to find out which files are out of date without changing them.
+
+   By giving arguments when you run 'make', you can do any of these
+things and many others.
+
+   The exit status of 'make' is always one of three values:
+'0'
+     The exit status is zero if 'make' is successful.
+'2'
+     The exit status is two if 'make' encounters any errors.  It will
+     print messages describing the particular errors.
+'1'
+     The exit status is one if you use the '-q' flag and 'make'
+     determines that some target is not already up to date.  *Note
+     Instead of Executing Recipes: Instead of Execution.
+
+* Menu:
+
+* Makefile Arguments::          How to specify which makefile to use.
+* Goals::                       How to use goal arguments to specify which
+                                  parts of the makefile to use.
+* Instead of Execution::        How to use mode flags to specify what
+                                  kind of thing to do with the recipes
+                                  in the makefile other than simply
+                                  execute them.
+* Avoiding Compilation::        How to avoid recompiling certain files.
+* Overriding::                  How to override a variable to specify
+                                  an alternate compiler and other things.
+* Testing::                     How to proceed past some errors, to
+                                  test compilation.
+* Options Summary::             Summary of Options
+
+
+File: make.info,  Node: Makefile Arguments,  Next: Goals,  Prev: Running,  Up: Running
+
+9.1 Arguments to Specify the Makefile
+=====================================
+
+The way to specify the name of the makefile is with the '-f' or '--file'
+option ('--makefile' also works).  For example, '-f altmake' says to use
+the file 'altmake' as the makefile.
+
+   If you use the '-f' flag several times and follow each '-f' with an
+argument, all the specified files are used jointly as makefiles.
+
+   If you do not use the '-f' or '--file' flag, the default is to try
+'GNUmakefile', 'makefile', and 'Makefile', in that order, and use the
+first of these three which exists or can be made (*note Writing
+Makefiles: Makefiles.).
+
+
+File: make.info,  Node: Goals,  Next: Instead of Execution,  Prev: Makefile Arguments,  Up: Running
+
+9.2 Arguments to Specify the Goals
+==================================
+
+The "goals" are the targets that 'make' should strive ultimately to
+update.  Other targets are updated as well if they appear as
+prerequisites of goals, or prerequisites of prerequisites of goals, etc.
+
+   By default, the goal is the first target in the makefile (not
+counting targets that start with a period).  Therefore, makefiles are
+usually written so that the first target is for compiling the entire
+program or programs they describe.  If the first rule in the makefile
+has several targets, only the first target in the rule becomes the
+default goal, not the whole list.  You can manage the selection of the
+default goal from within your makefile using the '.DEFAULT_GOAL'
+variable (*note Other Special Variables: Special Variables.).
+
+   You can also specify a different goal or goals with command line
+arguments to 'make'.  Use the name of the goal as an argument.  If you
+specify several goals, 'make' processes each of them in turn, in the
+order you name them.
+
+   Any target in the makefile may be specified as a goal (unless it
+starts with '-' or contains an '=', in which case it will be parsed as a
+switch or variable definition, respectively).  Even targets not in the
+makefile may be specified, if 'make' can find implicit rules that say
+how to make them.
+
+   'Make' will set the special variable 'MAKECMDGOALS' to the list of
+goals you specified on the command line.  If no goals were given on the
+command line, this variable is empty.  Note that this variable should be
+used only in special circumstances.
+
+   An example of appropriate use is to avoid including '.d' files during
+'clean' rules (*note Automatic Prerequisites::), so 'make' won't create
+them only to immediately remove them again:
+
+     sources = foo.c bar.c
+
+     ifneq ($(MAKECMDGOALS),clean)
+     include $(sources:.c=.d)
+     endif
+
+   One use of specifying a goal is if you want to compile only a part of
+the program, or only one of several programs.  Specify as a goal each
+file that you wish to remake.  For example, consider a directory
+containing several programs, with a makefile that starts like this:
+
+     .PHONY: all
+     all: size nm ld ar as
+
+   If you are working on the program 'size', you might want to say 'make size'
+so that only the files of that program are recompiled.
+
+   Another use of specifying a goal is to make files that are not
+normally made.  For example, there may be a file of debugging output, or
+a version of the program that is compiled specially for testing, which
+has a rule in the makefile but is not a prerequisite of the default
+goal.
+
+   Another use of specifying a goal is to run the recipe associated with
+a phony target (*note Phony Targets::) or empty target (*note Empty
+Target Files to Record Events: Empty Targets.).  Many makefiles contain
+a phony target named 'clean' which deletes everything except source
+files.  Naturally, this is done only if you request it explicitly with
+'make clean'.  Following is a list of typical phony and empty target
+names.  *Note Standard Targets::, for a detailed list of all the
+standard target names which GNU software packages use.
+
+'all'
+     Make all the top-level targets the makefile knows about.
+
+'clean'
+     Delete all files that are normally created by running 'make'.
+
+'mostlyclean'
+     Like 'clean', but may refrain from deleting a few files that people
+     normally don't want to recompile.  For example, the 'mostlyclean'
+     target for GCC does not delete 'libgcc.a', because recompiling it
+     is rarely necessary and takes a lot of time.
+
+'distclean'
+'realclean'
+'clobber'
+     Any of these targets might be defined to delete _more_ files than
+     'clean' does.  For example, this would delete configuration files
+     or links that you would normally create as preparation for
+     compilation, even if the makefile itself cannot create these files.
+
+'install'
+     Copy the executable file into a directory that users typically
+     search for commands; copy any auxiliary files that the executable
+     uses into the directories where it will look for them.
+
+'print'
+     Print listings of the source files that have changed.
+
+'tar'
+     Create a tar file of the source files.
+
+'shar'
+     Create a shell archive (shar file) of the source files.
+
+'dist'
+     Create a distribution file of the source files.  This might be a
+     tar file, or a shar file, or a compressed version of one of the
+     above, or even more than one of the above.
+
+'TAGS'
+     Update a tags table for this program.
+
+'check'
+'test'
+     Perform self tests on the program this makefile builds.
+
+
+File: make.info,  Node: Instead of Execution,  Next: Avoiding Compilation,  Prev: Goals,  Up: Running
+
+9.3 Instead of Executing Recipes
+================================
+
+The makefile tells 'make' how to tell whether a target is up to date,
+and how to update each target.  But updating the targets is not always
+what you want.  Certain options specify other activities for 'make'.
+
+'-n'
+'--just-print'
+'--dry-run'
+'--recon'
+
+     "No-op".  Causes 'make' to print the recipes that are needed to
+     make the targets up to date, but not actually execute them.  Note
+     that some recipes are still executed, even with this flag (*note
+     How the 'MAKE' Variable Works: MAKE Variable.).  Also any recipes
+     needed to update included makefiles are still executed (*note How
+     Makefiles Are Remade: Remaking Makefiles.).
+
+'-t'
+'--touch'
+
+     "Touch".  Marks targets as up to date without actually changing
+     them.  In other words, 'make' pretends to update the targets but
+     does not really change their contents; instead only their modified
+     times are updated.
+
+'-q'
+'--question'
+
+     "Question".  Silently check whether the targets are up to date, but
+     do not execute recipes; the exit code shows whether any updates are
+     needed.
+
+'-W FILE'
+'--what-if=FILE'
+'--assume-new=FILE'
+'--new-file=FILE'
+
+     "What if".  Each '-W' flag is followed by a file name.  The given
+     files' modification times are recorded by 'make' as being the
+     present time, although the actual modification times remain the
+     same.  You can use the '-W' flag in conjunction with the '-n' flag
+     to see what would happen if you were to modify specific files.
+
+   With the '-n' flag, 'make' prints the recipe that it would normally
+execute but usually does not execute it.
+
+   With the '-t' flag, 'make' ignores the recipes in the rules and uses
+(in effect) the command 'touch' for each target that needs to be remade.
+The 'touch' command is also printed, unless '-s' or '.SILENT' is used.
+For speed, 'make' does not actually invoke the program 'touch'.  It does
+the work directly.
+
+   With the '-q' flag, 'make' prints nothing and executes no recipes,
+but the exit status code it returns is zero if and only if the targets
+to be considered are already up to date.  If the exit status is one,
+then some updating needs to be done.  If 'make' encounters an error, the
+exit status is two, so you can distinguish an error from a target that
+is not up to date.
+
+   It is an error to use more than one of these three flags in the same
+invocation of 'make'.
+
+   The '-n', '-t', and '-q' options do not affect recipe lines that
+begin with '+' characters or contain the strings '$(MAKE)' or '${MAKE}'.
+Note that only the line containing the '+' character or the strings
+'$(MAKE)' or '${MAKE}' is run regardless of these options.  Other lines
+in the same rule are not run unless they too begin with '+' or contain
+'$(MAKE)' or '${MAKE}' (*Note How the 'MAKE' Variable Works: MAKE
+Variable.)
+
+   The '-t' flag prevents phony targets (*note Phony Targets::) from
+being updated, unless there are recipe lines beginning with '+' or
+containing '$(MAKE)' or '${MAKE}'.
+
+   The '-W' flag provides two features:
+
+   * If you also use the '-n' or '-q' flag, you can see what 'make'
+     would do if you were to modify some files.
+
+   * Without the '-n' or '-q' flag, when 'make' is actually executing
+     recipes, the '-W' flag can direct 'make' to act as if some files
+     had been modified, without actually running the recipes for those
+     files.
+
+   Note that the options '-p' and '-v' allow you to obtain other
+information about 'make' or about the makefiles in use (*note Summary of
+Options: Options Summary.).
+
+
+File: make.info,  Node: Avoiding Compilation,  Next: Overriding,  Prev: Instead of Execution,  Up: Running
+
+9.4 Avoiding Recompilation of Some Files
+========================================
+
+Sometimes you may have changed a source file but you do not want to
+recompile all the files that depend on it.  For example, suppose you add
+a macro or a declaration to a header file that many other files depend
+on.  Being conservative, 'make' assumes that any change in the header
+file requires recompilation of all dependent files, but you know that
+they do not need to be recompiled and you would rather not waste the
+time waiting for them to compile.
+
+   If you anticipate the problem before changing the header file, you
+can use the '-t' flag.  This flag tells 'make' not to run the recipes in
+the rules, but rather to mark the target up to date by changing its
+last-modification date.  You would follow this procedure:
+
+  1. Use the command 'make' to recompile the source files that really
+     need recompilation, ensuring that the object files are up-to-date
+     before you begin.
+
+  2. Make the changes in the header files.
+
+  3. Use the command 'make -t' to mark all the object files as up to
+     date.  The next time you run 'make', the changes in the header
+     files will not cause any recompilation.
+
+   If you have already changed the header file at a time when some files
+do need recompilation, it is too late to do this.  Instead, you can use
+the '-o FILE' flag, which marks a specified file as "old" (*note Summary
+of Options: Options Summary.).  This means that the file itself will not
+be remade, and nothing else will be remade on its account.  Follow this
+procedure:
+
+  1. Recompile the source files that need compilation for reasons
+     independent of the particular header file, with 'make -o
+     HEADERFILE'.  If several header files are involved, use a separate
+     '-o' option for each header file.
+
+  2. Touch all the object files with 'make -t'.
+
+
+File: make.info,  Node: Overriding,  Next: Testing,  Prev: Avoiding Compilation,  Up: Running
+
+9.5 Overriding Variables
+========================
+
+An argument that contains '=' specifies the value of a variable: 'V=X'
+sets the value of the variable V to X.  If you specify a value in this
+way, all ordinary assignments of the same variable in the makefile are
+ignored; we say they have been "overridden" by the command line
+argument.
+
+   The most common way to use this facility is to pass extra flags to
+compilers.  For example, in a properly written makefile, the variable
+'CFLAGS' is included in each recipe that runs the C compiler, so a file
+'foo.c' would be compiled something like this:
+
+     cc -c $(CFLAGS) foo.c
+
+   Thus, whatever value you set for 'CFLAGS' affects each compilation
+that occurs.  The makefile probably specifies the usual value for
+'CFLAGS', like this:
+
+     CFLAGS=-g
+
+   Each time you run 'make', you can override this value if you wish.
+For example, if you say 'make CFLAGS='-g -O'', each C compilation will
+be done with 'cc -c -g -O'.  (This also illustrates how you can use
+quoting in the shell to enclose spaces and other special characters in
+the value of a variable when you override it.)
+
+   The variable 'CFLAGS' is only one of many standard variables that
+exist just so that you can change them this way.  *Note Variables Used
+by Implicit Rules: Implicit Variables, for a complete list.
+
+   You can also program the makefile to look at additional variables of
+your own, giving the user the ability to control other aspects of how
+the makefile works by changing the variables.
+
+   When you override a variable with a command line argument, you can
+define either a recursively-expanded variable or a simply-expanded
+variable.  The examples shown above make a recursively-expanded
+variable; to make a simply-expanded variable, write ':=' or '::='
+instead of '='.  But, unless you want to include a variable reference or
+function call in the _value_ that you specify, it makes no difference
+which kind of variable you create.
+
+   There is one way that the makefile can change a variable that you
+have overridden.  This is to use the 'override' directive, which is a
+line that looks like this: 'override VARIABLE = VALUE' (*note The
+'override' Directive: Override Directive.).
+
+
+File: make.info,  Node: Testing,  Next: Options Summary,  Prev: Overriding,  Up: Running
+
+9.6 Testing the Compilation of a Program
+========================================
+
+Normally, when an error happens in executing a shell command, 'make'
+gives up immediately, returning a nonzero status.  No further recipes
+are executed for any target.  The error implies that the goal cannot be
+correctly remade, and 'make' reports this as soon as it knows.
+
+   When you are compiling a program that you have just changed, this is
+not what you want.  Instead, you would rather that 'make' try compiling
+every file that can be tried, to show you as many compilation errors as
+possible.
+
+   On these occasions, you should use the '-k' or '--keep-going' flag.
+This tells 'make' to continue to consider the other prerequisites of the
+pending targets, remaking them if necessary, before it gives up and
+returns nonzero status.  For example, after an error in compiling one
+object file, 'make -k' will continue compiling other object files even
+though it already knows that linking them will be impossible.  In
+addition to continuing after failed shell commands, 'make -k' will
+continue as much as possible after discovering that it does not know how
+to make a target or prerequisite file.  This will always cause an error
+message, but without '-k', it is a fatal error (*note Summary of
+Options: Options Summary.).
+
+   The usual behavior of 'make' assumes that your purpose is to get the
+goals up to date; once 'make' learns that this is impossible, it might
+as well report the failure immediately.  The '-k' flag says that the
+real purpose is to test as much as possible of the changes made in the
+program, perhaps to find several independent problems so that you can
+correct them all before the next attempt to compile.  This is why Emacs'
+'M-x compile' command passes the '-k' flag by default.
+
+
+File: make.info,  Node: Options Summary,  Prev: Testing,  Up: Running
+
+9.7 Summary of Options
+======================
+
+Here is a table of all the options 'make' understands:
+
+'-b'
+'-m'
+     These options are ignored for compatibility with other versions of
+     'make'.
+
+'-B'
+'--always-make'
+     Consider all targets out-of-date.  GNU 'make' proceeds to consider
+     targets and their prerequisites using the normal algorithms;
+     however, all targets so considered are always remade regardless of
+     the status of their prerequisites.  To avoid infinite recursion, if
+     'MAKE_RESTARTS' (*note Other Special Variables: Special Variables.)
+     is set to a number greater than 0 this option is disabled when
+     considering whether to remake makefiles (*note How Makefiles Are
+     Remade: Remaking Makefiles.).
+
+'-C DIR'
+'--directory=DIR'
+     Change to directory DIR before reading the makefiles.  If multiple
+     '-C' options are specified, each is interpreted relative to the
+     previous one: '-C / -C etc' is equivalent to '-C /etc'.  This is
+     typically used with recursive invocations of 'make' (*note
+     Recursive Use of 'make': Recursion.).
+
+'-d'
+
+     Print debugging information in addition to normal processing.  The
+     debugging information says which files are being considered for
+     remaking, which file-times are being compared and with what
+     results, which files actually need to be remade, which implicit
+     rules are considered and which are applied--everything interesting
+     about how 'make' decides what to do.  The '-d' option is equivalent
+     to '--debug=a' (see below).
+
+'--debug[=OPTIONS]'
+
+     Print debugging information in addition to normal processing.
+     Various levels and types of output can be chosen.  With no
+     arguments, print the "basic" level of debugging.  Possible
+     arguments are below; only the first character is considered, and
+     values must be comma- or space-separated.
+
+     'a (all)'
+          All types of debugging output are enabled.  This is equivalent
+          to using '-d'.
+
+     'b (basic)'
+          Basic debugging prints each target that was found to be
+          out-of-date, and whether the build was successful or not.
+
+     'v (verbose)'
+          A level above 'basic'; includes messages about which makefiles
+          were parsed, prerequisites that did not need to be rebuilt,
+          etc.  This option also enables 'basic' messages.
+
+     'i (implicit)'
+          Prints messages describing the implicit rule searches for each
+          target.  This option also enables 'basic' messages.
+
+     'j (jobs)'
+          Prints messages giving details on the invocation of specific
+          sub-commands.
+
+     'm (makefile)'
+          By default, the above messages are not enabled while trying to
+          remake the makefiles.  This option enables messages while
+          rebuilding makefiles, too.  Note that the 'all' option does
+          enable this option.  This option also enables 'basic'
+          messages.
+
+     'n (none)'
+          Disable all debugging currently enabled.  If additional
+          debugging flags are encountered after this they will still
+          take effect.
+
+'-e'
+'--environment-overrides'
+     Give variables taken from the environment precedence over variables
+     from makefiles.  *Note Variables from the Environment: Environment.
+
+'-E STRING'
+'--eval=STRING'
+
+     Evaluate STRING as makefile syntax.  This is a command-line version
+     of the 'eval' function (*note Eval Function::).  The evaluation is
+     performed after the default rules and variables have been defined,
+     but before any makefiles are read.
+
+'-f FILE'
+'--file=FILE'
+'--makefile=FILE'
+     Read the file named FILE as a makefile.  *Note Writing Makefiles:
+     Makefiles.
+
+'-h'
+'--help'
+
+     Remind you of the options that 'make' understands and then exit.
+
+'-i'
+'--ignore-errors'
+     Ignore all errors in recipes executed to remake files.  *Note
+     Errors in Recipes: Errors.
+
+'-I DIR'
+'--include-dir=DIR'
+     Specifies a directory DIR to search for included makefiles.  *Note
+     Including Other Makefiles: Include.  If several '-I' options are
+     used to specify several directories, the directories are searched
+     in the order specified.
+
+'-j [JOBS]'
+'--jobs[=JOBS]'
+     Specifies the number of recipes (jobs) to run simultaneously.  With
+     no argument, 'make' runs as many recipes simultaneously as
+     possible.  If there is more than one '-j' option, the last one is
+     effective.  *Note Parallel Execution: Parallel, for more
+     information on how recipes are run.  Note that this option is
+     ignored on MS-DOS.
+
+'-k'
+'--keep-going'
+     Continue as much as possible after an error.  While the target that
+     failed, and those that depend on it, cannot be remade, the other
+     prerequisites of these targets can be processed all the same.
+     *Note Testing the Compilation of a Program: Testing.
+
+'-l [LOAD]'
+'--load-average[=LOAD]'
+'--max-load[=LOAD]'
+     Specifies that no new recipes should be started if there are other
+     recipes running and the load average is at least LOAD (a
+     floating-point number).  With no argument, removes a previous load
+     limit.  *Note Parallel Execution: Parallel.
+
+'-L'
+'--check-symlink-times'
+     On systems that support symbolic links, this option causes 'make'
+     to consider the timestamps on any symbolic links in addition to the
+     timestamp on the file referenced by those links.  When this option
+     is provided, the most recent timestamp among the file and the
+     symbolic links is taken as the modification time for this target
+     file.
+
+'-n'
+'--just-print'
+'--dry-run'
+'--recon'
+
+     Print the recipe that would be executed, but do not execute it
+     (except in certain circumstances).  *Note Instead of Executing
+     Recipes: Instead of Execution.
+
+'-o FILE'
+'--old-file=FILE'
+'--assume-old=FILE'
+     Do not remake the file FILE even if it is older than its
+     prerequisites, and do not remake anything on account of changes in
+     FILE.  Essentially the file is treated as very old and its rules
+     are ignored.  *Note Avoiding Recompilation of Some Files: Avoiding
+     Compilation.
+
+'-O[TYPE]'
+'--output-sync[=TYPE]'
+     Ensure that the complete output from each recipe is printed in one
+     uninterrupted sequence.  This option is only useful when using the
+     '--jobs' option to run multiple recipes simultaneously (*note
+     Parallel Execution: Parallel.) Without this option output will be
+     displayed as it is generated by the recipes.
+
+     With no type or the type 'target', output from the entire recipe of
+     each target is grouped together.  With the type 'line', output from
+     each line in the recipe is grouped together.  With the type
+     'recurse', the output from an entire recursive make is grouped
+     together.  With the type 'none', no output synchronization is
+     performed.  *Note Output During Parallel Execution: Parallel
+     Output.
+
+'-p'
+'--print-data-base'
+     Print the data base (rules and variable values) that results from
+     reading the makefiles; then execute as usual or as otherwise
+     specified.  This also prints the version information given by the
+     '-v' switch (see below).  To print the data base without trying to
+     remake any files, use 'make -qp'.  To print the data base of
+     predefined rules and variables, use 'make -p -f /dev/null'.  The
+     data base output contains file name and line number information for
+     recipe and variable definitions, so it can be a useful debugging
+     tool in complex environments.
+
+'-q'
+'--question'
+     "Question mode".  Do not run any recipes, or print anything; just
+     return an exit status that is zero if the specified targets are
+     already up to date, one if any remaking is required, or two if an
+     error is encountered.  *Note Instead of Executing Recipes: Instead
+     of Execution.
+
+'-r'
+'--no-builtin-rules'
+     Eliminate use of the built-in implicit rules (*note Using Implicit
+     Rules: Implicit Rules.).  You can still define your own by writing
+     pattern rules (*note Defining and Redefining Pattern Rules: Pattern
+     Rules.).  The '-r' option also clears out the default list of
+     suffixes for suffix rules (*note Old-Fashioned Suffix Rules: Suffix
+     Rules.).  But you can still define your own suffixes with a rule
+     for '.SUFFIXES', and then define your own suffix rules.  Note that
+     only _rules_ are affected by the '-r' option; default variables
+     remain in effect (*note Variables Used by Implicit Rules: Implicit
+     Variables.); see the '-R' option below.
+
+'-R'
+'--no-builtin-variables'
+     Eliminate use of the built-in rule-specific variables (*note
+     Variables Used by Implicit Rules: Implicit Variables.).  You can
+     still define your own, of course.  The '-R' option also
+     automatically enables the '-r' option (see above), since it doesn't
+     make sense to have implicit rules without any definitions for the
+     variables that they use.
+
+'-s'
+'--silent'
+'--quiet'
+
+     Silent operation; do not print the recipes as they are executed.
+     *Note Recipe Echoing: Echoing.
+
+'-S'
+'--no-keep-going'
+'--stop'
+
+     Cancel the effect of the '-k' option.  This is never necessary
+     except in a recursive 'make' where '-k' might be inherited from the
+     top-level 'make' via 'MAKEFLAGS' (*note Recursive Use of 'make':
+     Recursion.) or if you set '-k' in 'MAKEFLAGS' in your environment.
+
+'-t'
+'--touch'
+
+     Touch files (mark them up to date without really changing them)
+     instead of running their recipes.  This is used to pretend that the
+     recipes were done, in order to fool future invocations of 'make'.
+     *Note Instead of Executing Recipes: Instead of Execution.
+
+'--trace'
+     Show tracing information for 'make' execution.  Prints the entire
+     recipe to be executed, even for recipes that are normally silent
+     (due to '.SILENT' or '@').  Also prints the makefile name and line
+     number where the recipe was defined, and information on why the
+     target is being rebuilt.
+
+'-v'
+'--version'
+     Print the version of the 'make' program plus a copyright, a list of
+     authors, and a notice that there is no warranty; then exit.
+
+'-w'
+'--print-directory'
+     Print a message containing the working directory both before and
+     after executing the makefile.  This may be useful for tracking down
+     errors from complicated nests of recursive 'make' commands.  *Note
+     Recursive Use of 'make': Recursion.  (In practice, you rarely need
+     to specify this option since 'make' does it for you; see *note The
+     '--print-directory' Option: -w Option.)
+
+'--no-print-directory'
+     Disable printing of the working directory under '-w'.  This option
+     is useful when '-w' is turned on automatically, but you do not want
+     to see the extra messages.  *Note The '--print-directory' Option:
+     -w Option.
+
+'-W FILE'
+'--what-if=FILE'
+'--new-file=FILE'
+'--assume-new=FILE'
+     Pretend that the target FILE has just been modified.  When used
+     with the '-n' flag, this shows you what would happen if you were to
+     modify that file.  Without '-n', it is almost the same as running a
+     'touch' command on the given file before running 'make', except
+     that the modification time is changed only in the imagination of
+     'make'.  *Note Instead of Executing Recipes: Instead of Execution.
+
+'--warn-undefined-variables'
+     Issue a warning message whenever 'make' sees a reference to an
+     undefined variable.  This can be helpful when you are trying to
+     debug makefiles which use variables in complex ways.
+
diff --git a/doc/make.info-2 b/doc/make.info-2
new file mode 100644
index 0000000..4982e37
--- /dev/null
+++ b/doc/make.info-2
Binary files differ
diff --git a/doc/stamp-vti b/doc/stamp-vti
new file mode 100644
index 0000000..bd0f5a2
--- /dev/null
+++ b/doc/stamp-vti
@@ -0,0 +1,4 @@
+@set UPDATED 3 January 2017
+@set UPDATED-MONTH January 2017
+@set EDITION 4.2.90
+@set VERSION 4.2.90
diff --git a/doc/version.texi b/doc/version.texi
new file mode 100644
index 0000000..bd0f5a2
--- /dev/null
+++ b/doc/version.texi
@@ -0,0 +1,4 @@
+@set UPDATED 3 January 2017
+@set UPDATED-MONTH January 2017
+@set EDITION 4.2.90
+@set VERSION 4.2.90
diff --git a/glob/Makefile.in b/glob/Makefile.in
new file mode 100644
index 0000000..96fc8bf
--- /dev/null
+++ b/glob/Makefile.in
@@ -0,0 +1,603 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# -*-Makefile-*-, or close enough
+# Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = glob
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 \
+	$(top_srcdir)/config/longlong.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo "  AR      " $@;
+am__v_AR_1 = 
+libglob_a_AR = $(AR) $(ARFLAGS)
+libglob_a_LIBADD =
+am_libglob_a_OBJECTS = glob.$(OBJEXT) fnmatch.$(OBJEXT)
+libglob_a_OBJECTS = $(am_libglob_a_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libglob_a_SOURCES)
+DIST_SOURCES = $(libglob_a_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/config/depcomp \
+	COPYING.LIB ChangeLog
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign
+
+# Only build the library when the system doesn't already have GNU glob.
+@USE_LOCAL_GLOB_TRUE@noinst_LIBRARIES = libglob.a
+libglob_a_SOURCES = glob.c glob.h fnmatch.c fnmatch.h
+EXTRA_DIST = COPYING.LIB Makefile.ami SCOPTIONS SMakefile \
+			configure.bat
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign glob/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign glob/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+libglob.a: $(libglob_a_OBJECTS) $(libglob_a_DEPENDENCIES) $(EXTRA_libglob_a_DEPENDENCIES) 
+	$(AM_V_at)-rm -f libglob.a
+	$(AM_V_AR)$(libglob_a_AR) libglob.a $(libglob_a_OBJECTS) $(libglob_a_LIBADD)
+	$(AM_V_at)$(RANLIB) libglob.a
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fnmatch.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/glob.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+	clean-noinstLIBRARIES cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/po/.gitignore b/po/.gitignore
index d7261f5..7fd42a7 100644
--- a/po/.gitignore
+++ b/po/.gitignore
@@ -1,15 +1,3 @@
-Makefile.in.in
-Makevars.template
 POTFILES
-Rules-quot
-boldquot.sed
-en@boldquot.header
-en@quot.header
-insert-header.sin
-make.pot
-quot.sed
-remove-potcdate.sin
 remove-potcdate.sed
 stamp-po
-*.gmo
-*.po
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
new file mode 100644
index 0000000..65184f6
--- /dev/null
+++ b/po/Makefile.in.in
@@ -0,0 +1,475 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.19
+GETTEXT_MACRO_VERSION = 0.19
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SED = @SED@
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+	@echo "$(MSGFMT) -c -o $@ $<"; \
+	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
+	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch stamp-po" && \
+	  echo timestamp > stamp-poT && \
+	  mv stamp-poT stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+		 LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f \
+			       -size -10000000c -exec grep 'GNU @PACKAGE@' \
+			       /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+		 LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}@PACKAGE@" \
+	      --package-version='@VERSION@' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot; \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && @SHELL@ ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/po/Makevars.template b/po/Makevars.template
new file mode 100644
index 0000000..0648ec7
--- /dev/null
+++ b/po/Makevars.template
@@ -0,0 +1,78 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty.  If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU =
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context.  Possible values are "yes" and "no".  Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = no
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+#   --previous            to keep previous msgids of translated messages,
+#   --quiet               to reduce the verbosity.
+MSGMERGE_OPTIONS =
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed.  Possible values are "yes" and "no".  Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist".  Possible values are "yes" and
+# "no".  Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
diff --git a/po/Rules-quot b/po/Rules-quot
new file mode 100644
index 0000000..9dc9630
--- /dev/null
+++ b/po/Rules-quot
@@ -0,0 +1,58 @@
+# This file, Rules-quot, can be copied and used freely without restrictions.
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+	   | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+	   { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	     '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+	       $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+	       ;; \
+	     *) \
+	       $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+	       ;; \
+	     esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+	     ; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff --git a/po/boldquot.sed b/po/boldquot.sed
new file mode 100644
index 0000000..4b937aa
--- /dev/null
+++ b/po/boldquot.sed
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“[1m/g
+s/”/[0m”/g
+s/‘/‘[1m/g
+s/’/[0m’/g
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
new file mode 100644
index 0000000..fedb6a0
--- /dev/null
+++ b/po/en@boldquot.header
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff --git a/po/en@quot.header b/po/en@quot.header
new file mode 100644
index 0000000..a9647fc
--- /dev/null
+++ b/po/en@quot.header
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff --git a/po/insert-header.sin b/po/insert-header.sin
new file mode 100644
index 0000000..b26de01
--- /dev/null
+++ b/po/insert-header.sin
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/po/make.pot b/po/make.pot
new file mode 100644
index 0000000..142f757
--- /dev/null
+++ b/po/make.pot
@@ -0,0 +1,2128 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Free Software Foundation, Inc.
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: GNU make 4.2.90\n"
+"Report-Msgid-Bugs-To: bug-make@gnu.org\n"
+"POT-Creation-Date: 2017-01-03 18:05-0800\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ar.c:46
+#, c-format
+msgid "attempt to use unsupported feature: '%s'"
+msgstr ""
+
+#: ar.c:123
+#, c-format
+msgid "touch archive member is not available on VMS"
+msgstr ""
+
+#: ar.c:147
+#, c-format
+msgid "touch: Archive '%s' does not exist"
+msgstr ""
+
+#: ar.c:150
+#, c-format
+msgid "touch: '%s' is not a valid archive"
+msgstr ""
+
+#: ar.c:157
+#, c-format
+msgid "touch: Member '%s' does not exist in '%s'"
+msgstr ""
+
+#: ar.c:164
+#, c-format
+msgid "touch: Bad return code from ar_member_touch on '%s'"
+msgstr ""
+
+#: arscan.c:130
+#, c-format
+msgid "lbr$set_module() failed to extract module info, status = %d"
+msgstr ""
+
+#: arscan.c:236
+#, c-format
+msgid "lbr$ini_control() failed with status = %d"
+msgstr ""
+
+#: arscan.c:261
+#, c-format
+msgid "unable to open library '%s' to lookup member status %d"
+msgstr ""
+
+#: arscan.c:940
+#, c-format
+msgid "Member '%s'%s: %ld bytes at %ld (%ld).\n"
+msgstr ""
+
+#: arscan.c:941
+msgid " (name might be truncated)"
+msgstr ""
+
+#: arscan.c:943
+#, c-format
+msgid "  Date %s"
+msgstr ""
+
+#: arscan.c:944
+#, c-format
+msgid "  uid = %d, gid = %d, mode = 0%o.\n"
+msgstr ""
+
+#: commands.c:402
+#, c-format
+msgid "Recipe has too many lines (%ud)"
+msgstr ""
+
+#: commands.c:503
+msgid "*** Break.\n"
+msgstr ""
+
+#: commands.c:627
+#, c-format
+msgid "*** [%s] Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:631
+#, c-format
+msgid "*** Archive member '%s' may be bogus; not deleted"
+msgstr ""
+
+#: commands.c:645
+#, c-format
+msgid "*** [%s] Deleting file '%s'"
+msgstr ""
+
+#: commands.c:647
+#, c-format
+msgid "*** Deleting file '%s'"
+msgstr ""
+
+#: commands.c:683
+msgid "#  recipe to execute"
+msgstr ""
+
+#: commands.c:686
+msgid " (built-in):"
+msgstr ""
+
+#: commands.c:688
+#, c-format
+msgid " (from '%s', line %lu):\n"
+msgstr ""
+
+#: dir.c:1069
+msgid ""
+"\n"
+"# Directories\n"
+msgstr ""
+
+#: dir.c:1081
+#, c-format
+msgid "# %s: could not be stat'd.\n"
+msgstr ""
+
+#: dir.c:1085
+msgid "# %s (key %s, mtime %I64u): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1090
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1095
+#, c-format
+msgid "# %s (device %ld, inode %ld): could not be opened.\n"
+msgstr ""
+
+#: dir.c:1122
+msgid "# %s (key %s, mtime %I64u): "
+msgstr ""
+
+#: dir.c:1127
+#, c-format
+msgid "# %s (device %d, inode [%d,%d,%d]): "
+msgstr ""
+
+#: dir.c:1132
+#, c-format
+msgid "# %s (device %ld, inode %ld): "
+msgstr ""
+
+#: dir.c:1138 dir.c:1159
+msgid "No"
+msgstr ""
+
+#: dir.c:1141 dir.c:1162
+msgid " files, "
+msgstr ""
+
+#: dir.c:1143 dir.c:1164
+msgid "no"
+msgstr ""
+
+#: dir.c:1146
+msgid " impossibilities"
+msgstr ""
+
+#: dir.c:1150
+msgid " so far."
+msgstr ""
+
+#: dir.c:1167
+#, c-format
+msgid " impossibilities in %lu directories.\n"
+msgstr ""
+
+#: expand.c:125
+#, c-format
+msgid "Recursive variable '%s' references itself (eventually)"
+msgstr ""
+
+#: expand.c:271
+#, c-format
+msgid "unterminated variable reference"
+msgstr ""
+
+#: file.c:278
+#, c-format
+msgid "Recipe was specified for file '%s' at %s:%lu,"
+msgstr ""
+
+#: file.c:283
+#, c-format
+msgid "Recipe for file '%s' was found by implicit rule search,"
+msgstr ""
+
+#: file.c:287
+#, c-format
+msgid "but '%s' is now considered the same file as '%s'."
+msgstr ""
+
+#: file.c:290
+#, c-format
+msgid "Recipe for '%s' will be ignored in favor of the one for '%s'."
+msgstr ""
+
+#: file.c:310
+#, c-format
+msgid "can't rename single-colon '%s' to double-colon '%s'"
+msgstr ""
+
+#: file.c:316
+#, c-format
+msgid "can't rename double-colon '%s' to single-colon '%s'"
+msgstr ""
+
+#: file.c:408
+#, c-format
+msgid "*** Deleting intermediate file '%s'"
+msgstr ""
+
+#: file.c:412
+#, c-format
+msgid "Removing intermediate files...\n"
+msgstr ""
+
+#: file.c:818
+msgid "Current time"
+msgstr ""
+
+#: file.c:822
+#, c-format
+msgid "%s: Timestamp out of range; substituting %s"
+msgstr ""
+
+#: file.c:962
+msgid "# Not a target:"
+msgstr ""
+
+#: file.c:967
+msgid "#  Precious file (prerequisite of .PRECIOUS)."
+msgstr ""
+
+#: file.c:969
+msgid "#  Phony target (prerequisite of .PHONY)."
+msgstr ""
+
+#: file.c:971
+msgid "#  Command line target."
+msgstr ""
+
+#: file.c:973
+msgid "#  A default, MAKEFILES, or -include/sinclude makefile."
+msgstr ""
+
+#: file.c:975
+msgid "#  Builtin rule"
+msgstr ""
+
+#: file.c:977
+msgid "#  Implicit rule search has been done."
+msgstr ""
+
+#: file.c:978
+msgid "#  Implicit rule search has not been done."
+msgstr ""
+
+#: file.c:980
+#, c-format
+msgid "#  Implicit/static pattern stem: '%s'\n"
+msgstr ""
+
+#: file.c:982
+msgid "#  File is an intermediate prerequisite."
+msgstr ""
+
+#: file.c:986
+msgid "#  Also makes:"
+msgstr ""
+
+#: file.c:992
+msgid "#  Modification time never checked."
+msgstr ""
+
+#: file.c:994
+msgid "#  File does not exist."
+msgstr ""
+
+#: file.c:996
+msgid "#  File is very old."
+msgstr ""
+
+#: file.c:1001
+#, c-format
+msgid "#  Last modified %s\n"
+msgstr ""
+
+#: file.c:1004
+msgid "#  File has been updated."
+msgstr ""
+
+#: file.c:1004
+msgid "#  File has not been updated."
+msgstr ""
+
+#: file.c:1008
+msgid "#  Recipe currently running (THIS IS A BUG)."
+msgstr ""
+
+#: file.c:1011
+msgid "#  Dependencies recipe running (THIS IS A BUG)."
+msgstr ""
+
+#: file.c:1020
+msgid "#  Successfully updated."
+msgstr ""
+
+#: file.c:1024
+msgid "#  Needs to be updated (-q is set)."
+msgstr ""
+
+#: file.c:1027
+msgid "#  Failed to be updated."
+msgstr ""
+
+#: file.c:1032
+msgid "#  Invalid value in 'command_state' member!"
+msgstr ""
+
+#: file.c:1051
+msgid ""
+"\n"
+"# Files"
+msgstr ""
+
+#: file.c:1055
+msgid ""
+"\n"
+"# files hash-table stats:\n"
+"# "
+msgstr ""
+
+#: file.c:1065
+#, c-format
+msgid "%s: Field '%s' not cached: %s"
+msgstr ""
+
+#: function.c:790
+msgid "non-numeric first argument to 'word' function"
+msgstr ""
+
+#: function.c:795
+#, c-format
+msgid "first argument to 'word' function must be greater than 0"
+msgstr ""
+
+#: function.c:815
+msgid "non-numeric first argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:817
+msgid "non-numeric second argument to 'wordlist' function"
+msgstr ""
+
+#: function.c:1526
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(In) failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1550
+#, c-format
+msgid "windows32_openpipe: DuplicateHandle(Err) failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1557
+#, c-format
+msgid "CreatePipe() failed (e=%ld)\n"
+msgstr ""
+
+#: function.c:1565
+#, c-format
+msgid "windows32_openpipe(): process_init_fd() failed\n"
+msgstr ""
+
+#: function.c:1859
+#, c-format
+msgid "Cleaning up temporary batch file %s\n"
+msgstr ""
+
+#: function.c:2216 function.c:2241
+#, c-format
+msgid "file: missing filename"
+msgstr ""
+
+#: function.c:2220 function.c:2251
+#, c-format
+msgid "open: %s: %s"
+msgstr ""
+
+#: function.c:2228
+#, c-format
+msgid "write: %s: %s"
+msgstr ""
+
+#: function.c:2231 function.c:2268
+#, c-format
+msgid "close: %s: %s"
+msgstr ""
+
+#: function.c:2244
+#, c-format
+msgid "file: too many arguments"
+msgstr ""
+
+#: function.c:2263
+#, c-format
+msgid "read: %s: %s"
+msgstr ""
+
+#: function.c:2276
+#, c-format
+msgid "file: invalid file operation: %s"
+msgstr ""
+
+#: function.c:2391
+#, c-format
+msgid "insufficient number of arguments (%d) to function '%s'"
+msgstr ""
+
+#: function.c:2403
+#, c-format
+msgid "unimplemented on this platform: function '%s'"
+msgstr ""
+
+#: function.c:2467
+#, c-format
+msgid "unterminated call to function '%s': missing '%c'"
+msgstr ""
+
+#: function.c:2651
+#, c-format
+msgid "Empty function name"
+msgstr ""
+
+#: function.c:2653
+#, c-format
+msgid "Invalid function name: %s"
+msgstr ""
+
+#: function.c:2655
+#, c-format
+msgid "Function name too long: %s"
+msgstr ""
+
+#: function.c:2658
+#, c-format
+msgid "Invalid minimum argument count (%u) for function %s"
+msgstr ""
+
+#: function.c:2661
+#, c-format
+msgid "Invalid maximum argument count (%u) for function %s"
+msgstr ""
+
+#: getopt.c:659
+#, c-format
+msgid "%s: option '%s' is ambiguous\n"
+msgstr ""
+
+#: getopt.c:683
+#, c-format
+msgid "%s: option '--%s' doesn't allow an argument\n"
+msgstr ""
+
+#: getopt.c:688
+#, c-format
+msgid "%s: option '%c%s' doesn't allow an argument\n"
+msgstr ""
+
+#: getopt.c:705 getopt.c:878
+#, c-format
+msgid "%s: option '%s' requires an argument\n"
+msgstr ""
+
+#: getopt.c:734
+#, c-format
+msgid "%s: unrecognized option '--%s'\n"
+msgstr ""
+
+#: getopt.c:738
+#, c-format
+msgid "%s: unrecognized option '%c%s'\n"
+msgstr ""
+
+#: getopt.c:764
+#, c-format
+msgid "%s: illegal option -- %c\n"
+msgstr ""
+
+#: getopt.c:767
+#, c-format
+msgid "%s: invalid option -- %c\n"
+msgstr ""
+
+#: getopt.c:797 getopt.c:927
+#, c-format
+msgid "%s: option requires an argument -- %c\n"
+msgstr ""
+
+#: getopt.c:844
+#, c-format
+msgid "%s: option '-W %s' is ambiguous\n"
+msgstr ""
+
+#: getopt.c:862
+#, c-format
+msgid "%s: option '-W %s' doesn't allow an argument\n"
+msgstr ""
+
+#: guile.c:58
+#, c-format
+msgid "guile: Expanding '%s'\n"
+msgstr ""
+
+#: guile.c:74
+#, c-format
+msgid "guile: Evaluating '%s'\n"
+msgstr ""
+
+#: hash.c:49
+#, c-format
+msgid "can't allocate %lu bytes for hash table: memory exhausted"
+msgstr ""
+
+#: hash.c:279
+#, c-format
+msgid "Load=%lu/%lu=%.0f%%, "
+msgstr ""
+
+#: hash.c:281
+#, c-format
+msgid "Rehash=%u, "
+msgstr ""
+
+#: hash.c:282
+#, c-format
+msgid "Collisions=%lu/%lu=%.0f%%"
+msgstr ""
+
+#: implicit.c:38
+#, c-format
+msgid "Looking for an implicit rule for '%s'.\n"
+msgstr ""
+
+#: implicit.c:54
+#, c-format
+msgid "Looking for archive-member implicit rule for '%s'.\n"
+msgstr ""
+
+#: implicit.c:311
+#, c-format
+msgid "Avoiding implicit rule recursion.\n"
+msgstr ""
+
+#: implicit.c:486
+#, c-format
+msgid "Stem too long: '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:491
+#, c-format
+msgid "Trying pattern rule with stem '%.*s'.\n"
+msgstr ""
+
+#: implicit.c:697
+#, c-format
+msgid "Rejecting impossible rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:698
+#, c-format
+msgid "Rejecting impossible implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:711
+#, c-format
+msgid "Trying rule prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:712
+#, c-format
+msgid "Trying implicit prerequisite '%s'.\n"
+msgstr ""
+
+#: implicit.c:751
+#, c-format
+msgid "Found prerequisite '%s' as VPATH '%s'\n"
+msgstr ""
+
+#: implicit.c:765
+#, c-format
+msgid "Looking for a rule with intermediate file '%s'.\n"
+msgstr ""
+
+#: job.c:366
+msgid "Cannot create a temporary file\n"
+msgstr ""
+
+#: job.c:488
+msgid " (core dumped)"
+msgstr ""
+
+#: job.c:493
+msgid " (ignored)"
+msgstr ""
+
+#: job.c:497 job.c:1831
+msgid "<builtin>"
+msgstr ""
+
+#: job.c:513
+#, c-format
+msgid "%s[%s: %s] Error %d%s"
+msgstr ""
+
+#: job.c:602
+#, c-format
+msgid "*** Waiting for unfinished jobs...."
+msgstr ""
+
+#: job.c:632
+#, c-format
+msgid "Live child %p (%s) PID %s %s\n"
+msgstr ""
+
+#: job.c:634 job.c:836 job.c:955 job.c:1586
+#, c-format
+msgid " (remote)"
+msgstr ""
+
+#: job.c:834
+#, c-format
+msgid "Reaping losing child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:835
+#, c-format
+msgid "Reaping winning child %p PID %s %s\n"
+msgstr ""
+
+#: job.c:842
+#, c-format
+msgid "Cleaning up temp batch file %s\n"
+msgstr ""
+
+#: job.c:848
+#, c-format
+msgid "Cleaning up temp batch file %s failed (%d)\n"
+msgstr ""
+
+#: job.c:954
+#, c-format
+msgid "Removing child %p PID %s%s from chain.\n"
+msgstr ""
+
+#: job.c:1009
+#, c-format
+msgid "Released token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:1511 job.c:2204
+#, c-format
+msgid "process_easy() failed to launch process (e=%ld)\n"
+msgstr ""
+
+#: job.c:1515 job.c:2208
+#, c-format
+msgid ""
+"\n"
+"Counted %d args in failed launch\n"
+msgstr ""
+
+#: job.c:1584
+#, c-format
+msgid "Putting child %p (%s) PID %s%s on the chain.\n"
+msgstr ""
+
+#: job.c:1814
+#, c-format
+msgid "Obtained token for child %p (%s).\n"
+msgstr ""
+
+#: job.c:1841
+#, c-format
+msgid "%s: target '%s' does not exist"
+msgstr ""
+
+#: job.c:1844
+#, c-format
+msgid "%s: update target '%s' due to: %s"
+msgstr ""
+
+#: job.c:1959
+#, c-format
+msgid "cannot enforce load limits on this operating system"
+msgstr ""
+
+#: job.c:1961
+msgid "cannot enforce load limit: "
+msgstr ""
+
+#: job.c:2051
+#, c-format
+msgid "no more file handles: could not duplicate stdin\n"
+msgstr ""
+
+#: job.c:2063
+#, c-format
+msgid "no more file handles: could not duplicate stdout\n"
+msgstr ""
+
+#: job.c:2077
+#, c-format
+msgid "no more file handles: could not duplicate stderr\n"
+msgstr ""
+
+#: job.c:2092
+#, c-format
+msgid "Could not restore stdin\n"
+msgstr ""
+
+#: job.c:2100
+#, c-format
+msgid "Could not restore stdout\n"
+msgstr ""
+
+#: job.c:2108
+#, c-format
+msgid "Could not restore stderr\n"
+msgstr ""
+
+#: job.c:2237
+#, c-format
+msgid "make reaped child pid %s, still waiting for pid %s\n"
+msgstr ""
+
+#: job.c:2278
+#, c-format
+msgid "%s: %s: Command not found\n"
+msgstr ""
+
+#: job.c:2280
+#, c-format
+msgid "%s[%u]: %s: Command not found\n"
+msgstr ""
+
+#: job.c:2340
+#, c-format
+msgid "%s: Shell program not found"
+msgstr ""
+
+#: job.c:2349
+#, c-format
+msgid "spawnvpe: environment space might be exhausted"
+msgstr ""
+
+#: job.c:2587
+#, c-format
+msgid "$SHELL changed (was '%s', now '%s')\n"
+msgstr ""
+
+#: job.c:3025 job.c:3210
+#, c-format
+msgid "Creating temporary batch file %s\n"
+msgstr ""
+
+#: job.c:3033
+#, c-format
+msgid ""
+"Batch file contents:\n"
+"\t@echo off\n"
+msgstr ""
+
+#: job.c:3222
+#, c-format
+msgid ""
+"Batch file contents:%s\n"
+"\t%s\n"
+msgstr ""
+
+#: job.c:3330
+#, c-format
+msgid "%s (line %d) Bad shell context (!unixy && !batch_mode_shell)\n"
+msgstr ""
+
+#: job.h:43
+#, c-format
+msgid "-O[TYPE] (--output-sync[=TYPE]) is not configured for this build."
+msgstr ""
+
+#: load.c:60
+#, c-format
+msgid "Failed to open global symbol table: %s"
+msgstr ""
+
+#: load.c:97
+#, c-format
+msgid "Loaded object %s is not declared to be GPL compatible"
+msgstr ""
+
+#: load.c:104
+#, c-format
+msgid "Failed to load symbol %s from %s: %s"
+msgstr ""
+
+#: load.c:149
+#, c-format
+msgid "Empty symbol name for load: %s"
+msgstr ""
+
+#: load.c:204
+#, c-format
+msgid "Loading symbol %s from %s\n"
+msgstr ""
+
+#: load.c:256
+#, c-format
+msgid "The 'load' operation is not supported on this platform."
+msgstr ""
+
+#: main.c:337
+msgid "Options:\n"
+msgstr ""
+
+#: main.c:338
+msgid "  -b, -m                      Ignored for compatibility.\n"
+msgstr ""
+
+#: main.c:340
+msgid "  -B, --always-make           Unconditionally make all targets.\n"
+msgstr ""
+
+#: main.c:342
+msgid ""
+"  -C DIRECTORY, --directory=DIRECTORY\n"
+"                              Change to DIRECTORY before doing anything.\n"
+msgstr ""
+
+#: main.c:345
+msgid "  -d                          Print lots of debugging information.\n"
+msgstr ""
+
+#: main.c:347
+msgid ""
+"  --debug[=FLAGS]             Print various types of debugging information.\n"
+msgstr ""
+
+#: main.c:349
+msgid ""
+"  -e, --environment-overrides\n"
+"                              Environment variables override makefiles.\n"
+msgstr ""
+
+#: main.c:352
+msgid ""
+"  -E STRING, --eval=STRING    Evaluate STRING as a makefile statement.\n"
+msgstr ""
+
+#: main.c:354
+msgid ""
+"  -f FILE, --file=FILE, --makefile=FILE\n"
+"                              Read FILE as a makefile.\n"
+msgstr ""
+
+#: main.c:357
+msgid "  -h, --help                  Print this message and exit.\n"
+msgstr ""
+
+#: main.c:359
+msgid "  -i, --ignore-errors         Ignore errors from recipes.\n"
+msgstr ""
+
+#: main.c:361
+msgid ""
+"  -I DIRECTORY, --include-dir=DIRECTORY\n"
+"                              Search DIRECTORY for included makefiles.\n"
+msgstr ""
+
+#: main.c:364
+msgid ""
+"  -j [N], --jobs[=N]          Allow N jobs at once; infinite jobs with no "
+"arg.\n"
+msgstr ""
+
+#: main.c:366
+msgid ""
+"  -k, --keep-going            Keep going when some targets can't be made.\n"
+msgstr ""
+
+#: main.c:368
+msgid ""
+"  -l [N], --load-average[=N], --max-load[=N]\n"
+"                              Don't start multiple jobs unless load is below "
+"N.\n"
+msgstr ""
+
+#: main.c:371
+msgid ""
+"  -L, --check-symlink-times   Use the latest mtime between symlinks and "
+"target.\n"
+msgstr ""
+
+#: main.c:373
+msgid ""
+"  -n, --just-print, --dry-run, --recon\n"
+"                              Don't actually run any recipe; just print "
+"them.\n"
+msgstr ""
+
+#: main.c:376
+msgid ""
+"  -o FILE, --old-file=FILE, --assume-old=FILE\n"
+"                              Consider FILE to be very old and don't remake "
+"it.\n"
+msgstr ""
+
+#: main.c:379
+msgid ""
+"  -O[TYPE], --output-sync[=TYPE]\n"
+"                              Synchronize output of parallel jobs by TYPE.\n"
+msgstr ""
+
+#: main.c:382
+msgid "  -p, --print-data-base       Print make's internal database.\n"
+msgstr ""
+
+#: main.c:384
+msgid ""
+"  -q, --question              Run no recipe; exit status says if up to "
+"date.\n"
+msgstr ""
+
+#: main.c:386
+msgid "  -r, --no-builtin-rules      Disable the built-in implicit rules.\n"
+msgstr ""
+
+#: main.c:388
+msgid "  -R, --no-builtin-variables  Disable the built-in variable settings.\n"
+msgstr ""
+
+#: main.c:390
+msgid "  -s, --silent, --quiet       Don't echo recipes.\n"
+msgstr ""
+
+#: main.c:392
+msgid "  --no-silent                 Echo recipes (disable --silent mode).\n"
+msgstr ""
+
+#: main.c:394
+msgid ""
+"  -S, --no-keep-going, --stop\n"
+"                              Turns off -k.\n"
+msgstr ""
+
+#: main.c:397
+msgid "  -t, --touch                 Touch targets instead of remaking them.\n"
+msgstr ""
+
+#: main.c:399
+msgid "  --trace                     Print tracing information.\n"
+msgstr ""
+
+#: main.c:401
+msgid ""
+"  -v, --version               Print the version number of make and exit.\n"
+msgstr ""
+
+#: main.c:403
+msgid "  -w, --print-directory       Print the current directory.\n"
+msgstr ""
+
+#: main.c:405
+msgid ""
+"  --no-print-directory        Turn off -w, even if it was turned on "
+"implicitly.\n"
+msgstr ""
+
+#: main.c:407
+msgid ""
+"  -W FILE, --what-if=FILE, --new-file=FILE, --assume-new=FILE\n"
+"                              Consider FILE to be infinitely new.\n"
+msgstr ""
+
+#: main.c:410
+msgid ""
+"  --warn-undefined-variables  Warn when an undefined variable is "
+"referenced.\n"
+msgstr ""
+
+#: main.c:681
+#, c-format
+msgid "empty string invalid as file name"
+msgstr ""
+
+#: main.c:764
+#, c-format
+msgid "unknown debug level specification '%s'"
+msgstr ""
+
+#: main.c:804
+#, c-format
+msgid "unknown output-sync type '%s'"
+msgstr ""
+
+#: main.c:859
+#, c-format
+msgid "%s: Interrupt/Exception caught (code = 0x%lx, addr = 0x%p)\n"
+msgstr ""
+
+#: main.c:866
+#, c-format
+msgid ""
+"\n"
+"Unhandled exception filter called from program %s\n"
+"ExceptionCode = %lx\n"
+"ExceptionFlags = %lx\n"
+"ExceptionAddress = 0x%p\n"
+msgstr ""
+
+#: main.c:874
+#, c-format
+msgid "Access violation: write operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:875
+#, c-format
+msgid "Access violation: read operation at address 0x%p\n"
+msgstr ""
+
+#: main.c:951 main.c:966
+#, c-format
+msgid "find_and_set_shell() setting default_shell = %s\n"
+msgstr ""
+
+#: main.c:1019
+#, c-format
+msgid "find_and_set_shell() path search set default_shell = %s\n"
+msgstr ""
+
+#: main.c:1536
+#, c-format
+msgid "%s is suspending for 30 seconds..."
+msgstr ""
+
+#: main.c:1538
+#, c-format
+msgid "done sleep(30). Continuing.\n"
+msgstr ""
+
+#: main.c:1625
+#, c-format
+msgid ""
+"warning: jobserver unavailable: using -j1.  Add '+' to parent make rule."
+msgstr ""
+
+#: main.c:1633
+#, c-format
+msgid "warning: -jN forced in submake: disabling jobserver mode."
+msgstr ""
+
+#: main.c:1803
+#, c-format
+msgid "Makefile from standard input specified twice."
+msgstr ""
+
+#: main.c:1841 vmsjobs.c:1252
+msgid "fopen (temporary file)"
+msgstr ""
+
+#: main.c:1847
+msgid "fwrite (temporary file)"
+msgstr ""
+
+#: main.c:2046
+#, c-format
+msgid "Parallel jobs (-j) are not supported on this platform."
+msgstr ""
+
+#: main.c:2047
+#, c-format
+msgid "Resetting to single job (-j1) mode."
+msgstr ""
+
+#: main.c:2086
+#, c-format
+msgid "Symbolic links not supported: disabling -L."
+msgstr ""
+
+#: main.c:2167
+#, c-format
+msgid "Updating makefiles....\n"
+msgstr ""
+
+#: main.c:2203
+#, c-format
+msgid "Makefile '%s' might loop; not remaking it.\n"
+msgstr ""
+
+#: main.c:2280
+#, c-format
+msgid "Failed to remake makefile '%s'."
+msgstr ""
+
+#: main.c:2300
+#, c-format
+msgid "Included makefile '%s' was not found."
+msgstr ""
+
+#: main.c:2305
+#, c-format
+msgid "Makefile '%s' was not found"
+msgstr ""
+
+#: main.c:2371
+#, c-format
+msgid "Couldn't change back to original directory."
+msgstr ""
+
+#: main.c:2379
+#, c-format
+msgid "Re-executing[%u]:"
+msgstr ""
+
+#: main.c:2488
+msgid "unlink (temporary file): "
+msgstr ""
+
+#: main.c:2521
+#, c-format
+msgid ".DEFAULT_GOAL contains more than one target"
+msgstr ""
+
+#: main.c:2545
+#, c-format
+msgid "No targets"
+msgstr ""
+
+#: main.c:2547
+#, c-format
+msgid "No targets specified and no makefile found"
+msgstr ""
+
+#: main.c:2552
+#, c-format
+msgid "Updating goal targets....\n"
+msgstr ""
+
+#: main.c:2576
+#, c-format
+msgid "warning:  Clock skew detected.  Your build may be incomplete."
+msgstr ""
+
+#: main.c:2770
+#, c-format
+msgid "Usage: %s [options] [target] ...\n"
+msgstr ""
+
+#: main.c:2776
+#, c-format
+msgid ""
+"\n"
+"This program built for %s\n"
+msgstr ""
+
+#: main.c:2778
+#, c-format
+msgid ""
+"\n"
+"This program built for %s (%s)\n"
+msgstr ""
+
+#: main.c:2781
+#, c-format
+msgid "Report bugs to <bug-make@gnu.org>\n"
+msgstr ""
+
+#: main.c:2867
+#, c-format
+msgid "the '%s%s' option requires a non-empty string argument"
+msgstr ""
+
+#: main.c:2931
+#, c-format
+msgid "the '-%c' option requires a positive integer argument"
+msgstr ""
+
+#: main.c:3325
+#, c-format
+msgid "%sBuilt for %s\n"
+msgstr ""
+
+#: main.c:3327
+#, c-format
+msgid "%sBuilt for %s (%s)\n"
+msgstr ""
+
+#: main.c:3338
+#, c-format
+msgid ""
+"%sLicense GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl."
+"html>\n"
+"%sThis is free software: you are free to change and redistribute it.\n"
+"%sThere is NO WARRANTY, to the extent permitted by law.\n"
+msgstr ""
+
+#: main.c:3359
+#, c-format
+msgid ""
+"\n"
+"# Make data base, printed on %s"
+msgstr ""
+
+#: main.c:3369
+#, c-format
+msgid ""
+"\n"
+"# Finished Make data base on %s\n"
+msgstr ""
+
+#: misc.c:202
+#, c-format
+msgid "Unknown error %d"
+msgstr ""
+
+#: misc.c:508
+#, c-format
+msgid "%s: user %lu (real %lu), group %lu (real %lu)\n"
+msgstr ""
+
+#: misc.c:529
+msgid "Initialized access"
+msgstr ""
+
+#: misc.c:608
+msgid "User access"
+msgstr ""
+
+#: misc.c:656
+msgid "Make access"
+msgstr ""
+
+#: misc.c:690
+msgid "Child access"
+msgstr ""
+
+#: output.c:112
+#, c-format
+msgid "%s: Entering an unknown directory\n"
+msgstr ""
+
+#: output.c:114
+#, c-format
+msgid "%s: Leaving an unknown directory\n"
+msgstr ""
+
+#: output.c:117
+#, c-format
+msgid "%s: Entering directory '%s'\n"
+msgstr ""
+
+#: output.c:119
+#, c-format
+msgid "%s: Leaving directory '%s'\n"
+msgstr ""
+
+#: output.c:123
+#, c-format
+msgid "%s[%u]: Entering an unknown directory\n"
+msgstr ""
+
+#: output.c:125
+#, c-format
+msgid "%s[%u]: Leaving an unknown directory\n"
+msgstr ""
+
+#: output.c:128
+#, c-format
+msgid "%s[%u]: Entering directory '%s'\n"
+msgstr ""
+
+#: output.c:130
+#, c-format
+msgid "%s[%u]: Leaving directory '%s'\n"
+msgstr ""
+
+#: output.c:518 output.c:520
+#, c-format
+msgid "write error: stdout"
+msgstr ""
+
+#: output.c:700
+msgid ".  Stop.\n"
+msgstr ""
+
+#: output.c:734
+#, c-format
+msgid "%s%s: %s"
+msgstr ""
+
+#: output.c:743
+#, c-format
+msgid "%s: %s"
+msgstr ""
+
+#: posixos.c:69
+msgid "creating jobs pipe"
+msgstr ""
+
+#: posixos.c:72 posixos.c:227
+msgid "duping jobs pipe"
+msgstr ""
+
+#: posixos.c:78
+msgid "init jobserver pipe"
+msgstr ""
+
+#: posixos.c:90
+#, c-format
+msgid "internal error: invalid --jobserver-auth string '%s'"
+msgstr ""
+
+#: posixos.c:93
+#, c-format
+msgid "Jobserver client (fds %d,%d)\n"
+msgstr ""
+
+#: posixos.c:109
+msgid "jobserver pipeline"
+msgstr ""
+
+#: posixos.c:154
+msgid "write jobserver"
+msgstr ""
+
+#: posixos.c:268
+msgid "pselect jobs pipe"
+msgstr ""
+
+#: posixos.c:279 posixos.c:391
+msgid "read jobs pipe"
+msgstr ""
+
+#: read.c:178
+#, c-format
+msgid "Reading makefiles...\n"
+msgstr ""
+
+#: read.c:333
+#, c-format
+msgid "Reading makefile '%s'"
+msgstr ""
+
+#: read.c:335
+#, c-format
+msgid " (no default goal)"
+msgstr ""
+
+#: read.c:337
+#, c-format
+msgid " (search path)"
+msgstr ""
+
+#: read.c:339
+#, c-format
+msgid " (don't care)"
+msgstr ""
+
+#: read.c:341
+#, c-format
+msgid " (no ~ expansion)"
+msgstr ""
+
+#: read.c:650
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile '%s'\n"
+msgstr ""
+
+#: read.c:653
+#, c-format
+msgid "Skipping UTF-8 BOM in makefile buffer\n"
+msgstr ""
+
+#: read.c:782
+#, c-format
+msgid "invalid syntax in conditional"
+msgstr ""
+
+#: read.c:955
+#, c-format
+msgid "%s: failed to load"
+msgstr ""
+
+#: read.c:981
+#, c-format
+msgid "recipe commences before first target"
+msgstr ""
+
+#: read.c:1030
+#, c-format
+msgid "missing rule before recipe"
+msgstr ""
+
+#: read.c:1120
+#, c-format
+msgid "missing separator (did you mean TAB instead of 8 spaces?)"
+msgstr ""
+
+#: read.c:1122
+#, c-format
+msgid "missing separator"
+msgstr ""
+
+#: read.c:1258
+#, c-format
+msgid "missing target pattern"
+msgstr ""
+
+#: read.c:1260
+#, c-format
+msgid "multiple target patterns"
+msgstr ""
+
+#: read.c:1264
+#, c-format
+msgid "target pattern contains no '%%'"
+msgstr ""
+
+#: read.c:1386
+#, c-format
+msgid "missing 'endif'"
+msgstr ""
+
+#: read.c:1425 read.c:1470 variable.c:1576
+#, c-format
+msgid "empty variable name"
+msgstr ""
+
+#: read.c:1460
+#, c-format
+msgid "extraneous text after 'define' directive"
+msgstr ""
+
+#: read.c:1485
+#, c-format
+msgid "missing 'endef', unterminated 'define'"
+msgstr ""
+
+#: read.c:1513
+#, c-format
+msgid "extraneous text after 'endef' directive"
+msgstr ""
+
+#: read.c:1585
+#, c-format
+msgid "extraneous text after '%s' directive"
+msgstr ""
+
+#: read.c:1586
+#, c-format
+msgid "extraneous '%s'"
+msgstr ""
+
+#: read.c:1614
+#, c-format
+msgid "only one 'else' per conditional"
+msgstr ""
+
+#: read.c:1889
+#, c-format
+msgid "Malformed target-specific variable definition"
+msgstr ""
+
+#: read.c:1947
+#, c-format
+msgid "prerequisites cannot be defined in recipes"
+msgstr ""
+
+#: read.c:2006
+#, c-format
+msgid "mixed implicit and static pattern rules"
+msgstr ""
+
+#: read.c:2029
+#, c-format
+msgid "mixed implicit and normal rules"
+msgstr ""
+
+#: read.c:2082
+#, c-format
+msgid "target '%s' doesn't match the target pattern"
+msgstr ""
+
+#: read.c:2097 read.c:2143
+#, c-format
+msgid "target file '%s' has both : and :: entries"
+msgstr ""
+
+#: read.c:2103
+#, c-format
+msgid "target '%s' given more than once in the same rule"
+msgstr ""
+
+#: read.c:2113
+#, c-format
+msgid "warning: overriding recipe for target '%s'"
+msgstr ""
+
+#: read.c:2116
+#, c-format
+msgid "warning: ignoring old recipe for target '%s'"
+msgstr ""
+
+#: read.c:2220
+#, c-format
+msgid "*** mixed implicit and normal rules: deprecated syntax"
+msgstr ""
+
+#: read.c:2539
+#, c-format
+msgid "warning: NUL character seen; rest of line ignored"
+msgstr ""
+
+#: remake.c:226
+#, c-format
+msgid "Nothing to be done for '%s'."
+msgstr ""
+
+#: remake.c:227
+#, c-format
+msgid "'%s' is up to date."
+msgstr ""
+
+#: remake.c:323
+#, c-format
+msgid "Pruning file '%s'.\n"
+msgstr ""
+
+#: remake.c:389
+#, c-format
+msgid "%sNo rule to make target '%s', needed by '%s'%s"
+msgstr ""
+
+#: remake.c:399
+#, c-format
+msgid "%sNo rule to make target '%s'%s"
+msgstr ""
+
+#: remake.c:425
+#, c-format
+msgid "Considering target file '%s'.\n"
+msgstr ""
+
+#: remake.c:432
+#, c-format
+msgid "Recently tried and failed to update file '%s'.\n"
+msgstr ""
+
+#: remake.c:444
+#, c-format
+msgid "File '%s' was considered already.\n"
+msgstr ""
+
+#: remake.c:454
+#, c-format
+msgid "Still updating file '%s'.\n"
+msgstr ""
+
+#: remake.c:457
+#, c-format
+msgid "Finished updating file '%s'.\n"
+msgstr ""
+
+#: remake.c:486
+#, c-format
+msgid "File '%s' does not exist.\n"
+msgstr ""
+
+#: remake.c:494
+#, c-format
+msgid ""
+"*** Warning: .LOW_RESOLUTION_TIME file '%s' has a high resolution time stamp"
+msgstr ""
+
+#: remake.c:507 remake.c:1039
+#, c-format
+msgid "Found an implicit rule for '%s'.\n"
+msgstr ""
+
+#: remake.c:509 remake.c:1041
+#, c-format
+msgid "No implicit rule found for '%s'.\n"
+msgstr ""
+
+#: remake.c:515
+#, c-format
+msgid "Using default recipe for '%s'.\n"
+msgstr ""
+
+#: remake.c:549 remake.c:1088
+#, c-format
+msgid "Circular %s <- %s dependency dropped."
+msgstr ""
+
+#: remake.c:674
+#, c-format
+msgid "Finished prerequisites of target file '%s'.\n"
+msgstr ""
+
+#: remake.c:680
+#, c-format
+msgid "The prerequisites of '%s' are being made.\n"
+msgstr ""
+
+#: remake.c:694
+#, c-format
+msgid "Giving up on target file '%s'.\n"
+msgstr ""
+
+#: remake.c:699
+#, c-format
+msgid "Target '%s' not remade because of errors."
+msgstr ""
+
+#: remake.c:751
+#, c-format
+msgid "Prerequisite '%s' is order-only for target '%s'.\n"
+msgstr ""
+
+#: remake.c:756
+#, c-format
+msgid "Prerequisite '%s' of target '%s' does not exist.\n"
+msgstr ""
+
+#: remake.c:761
+#, c-format
+msgid "Prerequisite '%s' is newer than target '%s'.\n"
+msgstr ""
+
+#: remake.c:764
+#, c-format
+msgid "Prerequisite '%s' is older than target '%s'.\n"
+msgstr ""
+
+#: remake.c:782
+#, c-format
+msgid "Target '%s' is double-colon and has no prerequisites.\n"
+msgstr ""
+
+#: remake.c:789
+#, c-format
+msgid "No recipe for '%s' and no prerequisites actually changed.\n"
+msgstr ""
+
+#: remake.c:794
+#, c-format
+msgid "Making '%s' due to always-make flag.\n"
+msgstr ""
+
+#: remake.c:802
+#, c-format
+msgid "No need to remake target '%s'"
+msgstr ""
+
+#: remake.c:804
+#, c-format
+msgid "; using VPATH name '%s'"
+msgstr ""
+
+#: remake.c:824
+#, c-format
+msgid "Must remake target '%s'.\n"
+msgstr ""
+
+#: remake.c:830
+#, c-format
+msgid "  Ignoring VPATH name '%s'.\n"
+msgstr ""
+
+#: remake.c:839
+#, c-format
+msgid "Recipe of '%s' is being run.\n"
+msgstr ""
+
+#: remake.c:846
+#, c-format
+msgid "Failed to remake target file '%s'.\n"
+msgstr ""
+
+#: remake.c:849
+#, c-format
+msgid "Successfully remade target file '%s'.\n"
+msgstr ""
+
+#: remake.c:852
+#, c-format
+msgid "Target file '%s' needs to be remade under -q.\n"
+msgstr ""
+
+#: remake.c:1047
+#, c-format
+msgid "Using default commands for '%s'.\n"
+msgstr ""
+
+#: remake.c:1422
+#, c-format
+msgid "Warning: File '%s' has modification time %s s in the future"
+msgstr ""
+
+#: remake.c:1624
+#, c-format
+msgid ".LIBPATTERNS element '%s' is not a pattern"
+msgstr ""
+
+#: remote-cstms.c:122
+#, c-format
+msgid "Customs won't export: %s\n"
+msgstr ""
+
+#: rule.c:496
+msgid ""
+"\n"
+"# Implicit Rules"
+msgstr ""
+
+#: rule.c:511
+msgid ""
+"\n"
+"# No implicit rules."
+msgstr ""
+
+#: rule.c:514
+#, c-format
+msgid ""
+"\n"
+"# %u implicit rules, %u (%.1f%%) terminal."
+msgstr ""
+
+#: rule.c:523
+#, c-format
+msgid "BUG: num_pattern_rules is wrong!  %u != %u"
+msgstr ""
+
+#: signame.c:84
+msgid "unknown signal"
+msgstr ""
+
+#: signame.c:92
+msgid "Hangup"
+msgstr ""
+
+#: signame.c:95
+msgid "Interrupt"
+msgstr ""
+
+#: signame.c:98
+msgid "Quit"
+msgstr ""
+
+#: signame.c:101
+msgid "Illegal Instruction"
+msgstr ""
+
+#: signame.c:104
+msgid "Trace/breakpoint trap"
+msgstr ""
+
+#: signame.c:109
+msgid "Aborted"
+msgstr ""
+
+#: signame.c:112
+msgid "IOT trap"
+msgstr ""
+
+#: signame.c:115
+msgid "EMT trap"
+msgstr ""
+
+#: signame.c:118
+msgid "Floating point exception"
+msgstr ""
+
+#: signame.c:121
+msgid "Killed"
+msgstr ""
+
+#: signame.c:124
+msgid "Bus error"
+msgstr ""
+
+#: signame.c:127
+msgid "Segmentation fault"
+msgstr ""
+
+#: signame.c:130
+msgid "Bad system call"
+msgstr ""
+
+#: signame.c:133
+msgid "Broken pipe"
+msgstr ""
+
+#: signame.c:136
+msgid "Alarm clock"
+msgstr ""
+
+#: signame.c:139
+msgid "Terminated"
+msgstr ""
+
+#: signame.c:142
+msgid "User defined signal 1"
+msgstr ""
+
+#: signame.c:145
+msgid "User defined signal 2"
+msgstr ""
+
+#: signame.c:150 signame.c:153
+msgid "Child exited"
+msgstr ""
+
+#: signame.c:156
+msgid "Power failure"
+msgstr ""
+
+#: signame.c:159
+msgid "Stopped"
+msgstr ""
+
+#: signame.c:162
+msgid "Stopped (tty input)"
+msgstr ""
+
+#: signame.c:165
+msgid "Stopped (tty output)"
+msgstr ""
+
+#: signame.c:168
+msgid "Stopped (signal)"
+msgstr ""
+
+#: signame.c:171
+msgid "CPU time limit exceeded"
+msgstr ""
+
+#: signame.c:174
+msgid "File size limit exceeded"
+msgstr ""
+
+#: signame.c:177
+msgid "Virtual timer expired"
+msgstr ""
+
+#: signame.c:180
+msgid "Profiling timer expired"
+msgstr ""
+
+#: signame.c:186
+msgid "Window changed"
+msgstr ""
+
+#: signame.c:189
+msgid "Continued"
+msgstr ""
+
+#: signame.c:192
+msgid "Urgent I/O condition"
+msgstr ""
+
+#: signame.c:199 signame.c:208
+msgid "I/O possible"
+msgstr ""
+
+#: signame.c:202
+msgid "SIGWIND"
+msgstr ""
+
+#: signame.c:205
+msgid "SIGPHONE"
+msgstr ""
+
+#: signame.c:211
+msgid "Resource lost"
+msgstr ""
+
+#: signame.c:214
+msgid "Danger signal"
+msgstr ""
+
+#: signame.c:217
+msgid "Information request"
+msgstr ""
+
+#: signame.c:220
+msgid "Floating point co-processor not available"
+msgstr ""
+
+#: strcache.c:274
+#, c-format
+msgid ""
+"\n"
+"%s No strcache buffers\n"
+msgstr ""
+
+#: strcache.c:304
+#, c-format
+msgid ""
+"\n"
+"%s strcache buffers: %lu (%lu) / strings = %lu / storage = %lu B / avg = %lu "
+"B\n"
+msgstr ""
+
+#: strcache.c:308
+#, c-format
+msgid ""
+"%s current buf: size = %hu B / used = %hu B / count = %hu / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:319
+#, c-format
+msgid "%s other used: total = %lu B / count = %lu / avg = %lu B\n"
+msgstr ""
+
+#: strcache.c:322
+#, c-format
+msgid ""
+"%s other free: total = %lu B / max = %lu B / min = %lu B / avg = %hu B\n"
+msgstr ""
+
+#: strcache.c:326
+#, c-format
+msgid ""
+"\n"
+"%s strcache performance: lookups = %lu / hit rate = %lu%%\n"
+msgstr ""
+
+#: strcache.c:328
+msgid ""
+"# hash-table stats:\n"
+"# "
+msgstr ""
+
+#: variable.c:1629
+msgid "automatic"
+msgstr ""
+
+#: variable.c:1632
+msgid "default"
+msgstr ""
+
+#: variable.c:1635
+msgid "environment"
+msgstr ""
+
+#: variable.c:1638
+msgid "makefile"
+msgstr ""
+
+#: variable.c:1641
+msgid "environment under -e"
+msgstr ""
+
+#: variable.c:1644
+msgid "command line"
+msgstr ""
+
+#: variable.c:1647
+msgid "'override' directive"
+msgstr ""
+
+#: variable.c:1658
+#, c-format
+msgid " (from '%s', line %lu)"
+msgstr ""
+
+#: variable.c:1721
+msgid "# variable set hash-table stats:\n"
+msgstr ""
+
+#: variable.c:1732
+msgid ""
+"\n"
+"# Variables\n"
+msgstr ""
+
+#: variable.c:1736
+msgid ""
+"\n"
+"# Pattern-specific Variable Values"
+msgstr ""
+
+#: variable.c:1750
+msgid ""
+"\n"
+"# No pattern-specific variable values."
+msgstr ""
+
+#: variable.c:1752
+#, c-format
+msgid ""
+"\n"
+"# %u pattern-specific variable values"
+msgstr ""
+
+#: variable.h:224
+#, c-format
+msgid "warning: undefined variable '%.*s'"
+msgstr ""
+
+#: vmsfunctions.c:91
+#, c-format
+msgid "sys$search() failed with %d\n"
+msgstr ""
+
+#: vmsjobs.c:242
+#, c-format
+msgid "-warning, you may have to re-enable CTRL-Y handling from DCL.\n"
+msgstr ""
+
+#: vmsjobs.c:679
+#, c-format
+msgid "BUILTIN CD %s\n"
+msgstr ""
+
+#: vmsjobs.c:1228
+#, c-format
+msgid "DCL: %s\n"
+msgstr ""
+
+#: vmsjobs.c:1288
+#, c-format
+msgid "Append output to %s\n"
+msgstr ""
+
+#: vmsjobs.c:1313
+#, c-format
+msgid "Append %.*s and cleanup\n"
+msgstr ""
+
+#: vmsjobs.c:1326
+#, c-format
+msgid "Executing %s instead\n"
+msgstr ""
+
+#: vpath.c:603
+msgid ""
+"\n"
+"# VPATH Search Paths\n"
+msgstr ""
+
+#: vpath.c:620
+msgid "# No 'vpath' search paths."
+msgstr ""
+
+#: vpath.c:622
+#, c-format
+msgid ""
+"\n"
+"# %u 'vpath' search paths.\n"
+msgstr ""
+
+#: vpath.c:625
+msgid ""
+"\n"
+"# No general ('VPATH' variable) search path."
+msgstr ""
+
+#: vpath.c:631
+msgid ""
+"\n"
+"# General ('VPATH' variable) search path:\n"
+"# "
+msgstr ""
+
+#: w32/w32os.c:44
+#, c-format
+msgid "Jobserver slots limited to %d\n"
+msgstr ""
+
+#: w32/w32os.c:60
+#, c-format
+msgid "creating jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: w32/w32os.c:79
+#, c-format
+msgid ""
+"internal error: unable to open jobserver semaphore '%s': (Error %ld: %s)"
+msgstr ""
+
+#: w32/w32os.c:82
+#, c-format
+msgid "Jobserver client (semaphore %s)\n"
+msgstr ""
+
+#: w32/w32os.c:123
+#, c-format
+msgid "release jobserver semaphore: (Error %ld: %s)"
+msgstr ""
+
+#: w32/w32os.c:194
+#, c-format
+msgid "semaphore or child process wait: (Error %ld: %s)"
+msgstr ""
diff --git a/po/quot.sed b/po/quot.sed
new file mode 100644
index 0000000..0122c46
--- /dev/null
+++ b/po/quot.sed
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
new file mode 100644
index 0000000..2436c49
--- /dev/null
+++ b/po/remove-potcdate.sin
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/w32/Makefile.in b/w32/Makefile.in
new file mode 100644
index 0000000..4102c13
--- /dev/null
+++ b/w32/Makefile.in
@@ -0,0 +1,726 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am to create libw32.a for mingw32 host.
+# Copyright (C) 1997-2016 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+#
+# GNU Make is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free Software
+# Foundation; either version 3 of the License, or (at your option) any later
+# version.
+#
+# GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY
+# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+# FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program.  If not, see <http://www.gnu.org/licenses/>.
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = w32
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \
+	$(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \
+	$(top_srcdir)/config/intlmacosx.m4 \
+	$(top_srcdir)/config/lib-ld.m4 \
+	$(top_srcdir)/config/lib-link.m4 \
+	$(top_srcdir)/config/lib-prefix.m4 \
+	$(top_srcdir)/config/longlong.m4 $(top_srcdir)/config/nls.m4 \
+	$(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \
+	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+AM_V_AR = $(am__v_AR_@AM_V@)
+am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
+am__v_AR_0 = @echo "  AR      " $@;
+am__v_AR_1 = 
+libw32_a_AR = $(AR) $(ARFLAGS)
+libw32_a_LIBADD =
+am__dirstamp = $(am__leading_dot)dirstamp
+am_libw32_a_OBJECTS = subproc/libw32_a-misc.$(OBJEXT) \
+	subproc/libw32_a-sub_proc.$(OBJEXT) \
+	subproc/libw32_a-w32err.$(OBJEXT) \
+	compat/libw32_a-posixfcn.$(OBJEXT) \
+	libw32_a-pathstuff.$(OBJEXT) libw32_a-w32os.$(OBJEXT)
+libw32_a_OBJECTS = $(am_libw32_a_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libw32_a_SOURCES)
+DIST_SOURCES = $(libw32_a_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/config/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_LDFLAGS = @AM_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GETLOADAVG_LIBS = @GETLOADAVG_LIBS@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GLOBINC = @GLOBINC@
+GLOBLIB = @GLOBLIB@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GUILE_CFLAGS = @GUILE_CFLAGS@
+GUILE_LIBS = @GUILE_LIBS@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KMEM_GROUP = @KMEM_GROUP@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HOST = @MAKE_HOST@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NEED_SETGID = @NEED_SETGID@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+REMOTE = @REMOTE@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = subdir-objects
+noinst_LIBRARIES = libw32.a
+libw32_a_SOURCES = subproc/misc.c subproc/sub_proc.c subproc/w32err.c \
+		    compat/posixfcn.c pathstuff.c w32os.c
+
+libw32_a_CPPFLAGS = -I$(srcdir)/include -I$(srcdir)/subproc -I$(top_srcdir) \
+		    -I$(top_srcdir)/glob
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign w32/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign w32/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+subproc/$(am__dirstamp):
+	@$(MKDIR_P) subproc
+	@: > subproc/$(am__dirstamp)
+subproc/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) subproc/$(DEPDIR)
+	@: > subproc/$(DEPDIR)/$(am__dirstamp)
+subproc/libw32_a-misc.$(OBJEXT): subproc/$(am__dirstamp) \
+	subproc/$(DEPDIR)/$(am__dirstamp)
+subproc/libw32_a-sub_proc.$(OBJEXT): subproc/$(am__dirstamp) \
+	subproc/$(DEPDIR)/$(am__dirstamp)
+subproc/libw32_a-w32err.$(OBJEXT): subproc/$(am__dirstamp) \
+	subproc/$(DEPDIR)/$(am__dirstamp)
+compat/$(am__dirstamp):
+	@$(MKDIR_P) compat
+	@: > compat/$(am__dirstamp)
+compat/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) compat/$(DEPDIR)
+	@: > compat/$(DEPDIR)/$(am__dirstamp)
+compat/libw32_a-posixfcn.$(OBJEXT): compat/$(am__dirstamp) \
+	compat/$(DEPDIR)/$(am__dirstamp)
+
+libw32.a: $(libw32_a_OBJECTS) $(libw32_a_DEPENDENCIES) $(EXTRA_libw32_a_DEPENDENCIES) 
+	$(AM_V_at)-rm -f libw32.a
+	$(AM_V_AR)$(libw32_a_AR) libw32.a $(libw32_a_OBJECTS) $(libw32_a_LIBADD)
+	$(AM_V_at)$(RANLIB) libw32.a
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+	-rm -f compat/*.$(OBJEXT)
+	-rm -f subproc/*.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libw32_a-pathstuff.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libw32_a-w32os.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@compat/$(DEPDIR)/libw32_a-posixfcn.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@subproc/$(DEPDIR)/libw32_a-misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@subproc/$(DEPDIR)/libw32_a-sub_proc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@subproc/$(DEPDIR)/libw32_a-w32err.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+subproc/libw32_a-misc.o: subproc/misc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-misc.o -MD -MP -MF subproc/$(DEPDIR)/libw32_a-misc.Tpo -c -o subproc/libw32_a-misc.o `test -f 'subproc/misc.c' || echo '$(srcdir)/'`subproc/misc.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-misc.Tpo subproc/$(DEPDIR)/libw32_a-misc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/misc.c' object='subproc/libw32_a-misc.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-misc.o `test -f 'subproc/misc.c' || echo '$(srcdir)/'`subproc/misc.c
+
+subproc/libw32_a-misc.obj: subproc/misc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-misc.obj -MD -MP -MF subproc/$(DEPDIR)/libw32_a-misc.Tpo -c -o subproc/libw32_a-misc.obj `if test -f 'subproc/misc.c'; then $(CYGPATH_W) 'subproc/misc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/misc.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-misc.Tpo subproc/$(DEPDIR)/libw32_a-misc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/misc.c' object='subproc/libw32_a-misc.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-misc.obj `if test -f 'subproc/misc.c'; then $(CYGPATH_W) 'subproc/misc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/misc.c'; fi`
+
+subproc/libw32_a-sub_proc.o: subproc/sub_proc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-sub_proc.o -MD -MP -MF subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo -c -o subproc/libw32_a-sub_proc.o `test -f 'subproc/sub_proc.c' || echo '$(srcdir)/'`subproc/sub_proc.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo subproc/$(DEPDIR)/libw32_a-sub_proc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/sub_proc.c' object='subproc/libw32_a-sub_proc.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-sub_proc.o `test -f 'subproc/sub_proc.c' || echo '$(srcdir)/'`subproc/sub_proc.c
+
+subproc/libw32_a-sub_proc.obj: subproc/sub_proc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-sub_proc.obj -MD -MP -MF subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo -c -o subproc/libw32_a-sub_proc.obj `if test -f 'subproc/sub_proc.c'; then $(CYGPATH_W) 'subproc/sub_proc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/sub_proc.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-sub_proc.Tpo subproc/$(DEPDIR)/libw32_a-sub_proc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/sub_proc.c' object='subproc/libw32_a-sub_proc.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-sub_proc.obj `if test -f 'subproc/sub_proc.c'; then $(CYGPATH_W) 'subproc/sub_proc.c'; else $(CYGPATH_W) '$(srcdir)/subproc/sub_proc.c'; fi`
+
+subproc/libw32_a-w32err.o: subproc/w32err.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-w32err.o -MD -MP -MF subproc/$(DEPDIR)/libw32_a-w32err.Tpo -c -o subproc/libw32_a-w32err.o `test -f 'subproc/w32err.c' || echo '$(srcdir)/'`subproc/w32err.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-w32err.Tpo subproc/$(DEPDIR)/libw32_a-w32err.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/w32err.c' object='subproc/libw32_a-w32err.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-w32err.o `test -f 'subproc/w32err.c' || echo '$(srcdir)/'`subproc/w32err.c
+
+subproc/libw32_a-w32err.obj: subproc/w32err.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT subproc/libw32_a-w32err.obj -MD -MP -MF subproc/$(DEPDIR)/libw32_a-w32err.Tpo -c -o subproc/libw32_a-w32err.obj `if test -f 'subproc/w32err.c'; then $(CYGPATH_W) 'subproc/w32err.c'; else $(CYGPATH_W) '$(srcdir)/subproc/w32err.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) subproc/$(DEPDIR)/libw32_a-w32err.Tpo subproc/$(DEPDIR)/libw32_a-w32err.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='subproc/w32err.c' object='subproc/libw32_a-w32err.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o subproc/libw32_a-w32err.obj `if test -f 'subproc/w32err.c'; then $(CYGPATH_W) 'subproc/w32err.c'; else $(CYGPATH_W) '$(srcdir)/subproc/w32err.c'; fi`
+
+compat/libw32_a-posixfcn.o: compat/posixfcn.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT compat/libw32_a-posixfcn.o -MD -MP -MF compat/$(DEPDIR)/libw32_a-posixfcn.Tpo -c -o compat/libw32_a-posixfcn.o `test -f 'compat/posixfcn.c' || echo '$(srcdir)/'`compat/posixfcn.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) compat/$(DEPDIR)/libw32_a-posixfcn.Tpo compat/$(DEPDIR)/libw32_a-posixfcn.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='compat/posixfcn.c' object='compat/libw32_a-posixfcn.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o compat/libw32_a-posixfcn.o `test -f 'compat/posixfcn.c' || echo '$(srcdir)/'`compat/posixfcn.c
+
+compat/libw32_a-posixfcn.obj: compat/posixfcn.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT compat/libw32_a-posixfcn.obj -MD -MP -MF compat/$(DEPDIR)/libw32_a-posixfcn.Tpo -c -o compat/libw32_a-posixfcn.obj `if test -f 'compat/posixfcn.c'; then $(CYGPATH_W) 'compat/posixfcn.c'; else $(CYGPATH_W) '$(srcdir)/compat/posixfcn.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) compat/$(DEPDIR)/libw32_a-posixfcn.Tpo compat/$(DEPDIR)/libw32_a-posixfcn.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='compat/posixfcn.c' object='compat/libw32_a-posixfcn.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o compat/libw32_a-posixfcn.obj `if test -f 'compat/posixfcn.c'; then $(CYGPATH_W) 'compat/posixfcn.c'; else $(CYGPATH_W) '$(srcdir)/compat/posixfcn.c'; fi`
+
+libw32_a-pathstuff.o: pathstuff.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libw32_a-pathstuff.o -MD -MP -MF $(DEPDIR)/libw32_a-pathstuff.Tpo -c -o libw32_a-pathstuff.o `test -f 'pathstuff.c' || echo '$(srcdir)/'`pathstuff.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libw32_a-pathstuff.Tpo $(DEPDIR)/libw32_a-pathstuff.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='pathstuff.c' object='libw32_a-pathstuff.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libw32_a-pathstuff.o `test -f 'pathstuff.c' || echo '$(srcdir)/'`pathstuff.c
+
+libw32_a-pathstuff.obj: pathstuff.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libw32_a-pathstuff.obj -MD -MP -MF $(DEPDIR)/libw32_a-pathstuff.Tpo -c -o libw32_a-pathstuff.obj `if test -f 'pathstuff.c'; then $(CYGPATH_W) 'pathstuff.c'; else $(CYGPATH_W) '$(srcdir)/pathstuff.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libw32_a-pathstuff.Tpo $(DEPDIR)/libw32_a-pathstuff.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='pathstuff.c' object='libw32_a-pathstuff.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libw32_a-pathstuff.obj `if test -f 'pathstuff.c'; then $(CYGPATH_W) 'pathstuff.c'; else $(CYGPATH_W) '$(srcdir)/pathstuff.c'; fi`
+
+libw32_a-w32os.o: w32os.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libw32_a-w32os.o -MD -MP -MF $(DEPDIR)/libw32_a-w32os.Tpo -c -o libw32_a-w32os.o `test -f 'w32os.c' || echo '$(srcdir)/'`w32os.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libw32_a-w32os.Tpo $(DEPDIR)/libw32_a-w32os.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='w32os.c' object='libw32_a-w32os.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libw32_a-w32os.o `test -f 'w32os.c' || echo '$(srcdir)/'`w32os.c
+
+libw32_a-w32os.obj: w32os.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libw32_a-w32os.obj -MD -MP -MF $(DEPDIR)/libw32_a-w32os.Tpo -c -o libw32_a-w32os.obj `if test -f 'w32os.c'; then $(CYGPATH_W) 'w32os.c'; else $(CYGPATH_W) '$(srcdir)/w32os.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libw32_a-w32os.Tpo $(DEPDIR)/libw32_a-w32os.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='w32os.c' object='libw32_a-w32os.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libw32_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libw32_a-w32os.obj `if test -f 'w32os.c'; then $(CYGPATH_W) 'w32os.c'; else $(CYGPATH_W) '$(srcdir)/w32os.c'; fi`
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-rm -f compat/$(DEPDIR)/$(am__dirstamp)
+	-rm -f compat/$(am__dirstamp)
+	-rm -f subproc/$(DEPDIR)/$(am__dirstamp)
+	-rm -f subproc/$(am__dirstamp)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR) compat/$(DEPDIR) subproc/$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR) compat/$(DEPDIR) subproc/$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
+	clean-noinstLIBRARIES cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: