| # NOTE: If you have no `make' program at all to process this makefile, run |
| # `build.sh' instead. |
| # |
| # Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc. |
| # This file is part of GNU Make. |
| # |
| # GNU Make is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2, or (at your option) |
| # any later version. |
| # |
| # GNU Make is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with GNU Make; see the file COPYING. If not, write to |
| # the Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| # Boston, MA 02111-1307, USA. |
| |
| # |
| # Makefile for GNU Make |
| # |
| |
| # Ultrix 2.2 make doesn't expand the value of VPATH. |
| VPATH = /make-%VERSION%/ |
| # This must repeat the value, because configure will remove `VPATH = .'. |
| srcdir = /make-%VERSION%/ |
| |
| CC = sc |
| RM = delete |
| MAKE = smake |
| |
| CFLAGS = |
| CPPFLAGS = |
| LDFLAGS = |
| |
| # Define these for your system as follows: |
| # -DNO_ARCHIVES To disable `ar' archive support. |
| # -DNO_FLOAT To avoid using floating-point numbers. |
| # -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2. |
| # Some compilers apparently accept this |
| # without complaint but produce losing code, |
| # so beware. |
| # NeXT 1.0a uses an old version of GCC, which required -D__inline=inline. |
| # See also `config.h'. |
| defines = |
| |
| # Which flavor of remote job execution support to use. |
| # The code is found in `remote-$(REMOTE).c'. |
| REMOTE = stub |
| |
| # If you are using the GNU C library, or have the GNU getopt functions in |
| # your C library, you can comment these out. |
| GETOPT = getopt.o getopt1.o |
| GETOPT_SRC = $(srcdir)getopt.c $(srcdir)getopt1.c $(srcdir)getopt.h |
| |
| # If you are using the GNU C library, or have the GNU glob functions in |
| # your C library, you can comment this out. GNU make uses special hooks |
| # into the glob functions to be more efficient (by using make's directory |
| # cache for globbing), so you must use the GNU functions even if your |
| # system's C library has the 1003.2 glob functions already. Also, the glob |
| # functions in the AIX and HPUX C libraries are said to be buggy. |
| GLOB = Lib glob/glob.lib |
| |
| # If your system doesn't have alloca, or the one provided is bad, define this. |
| ALLOCA = alloca.o |
| ALLOCA_SRC = $(srcdir)alloca.c |
| |
| # If your system needs extra libraries loaded in, define them here. |
| # System V probably need -lPW for alloca. HP-UX 7.0's alloca in |
| # libPW.a is broken on HP9000s300 and HP9000s400 machines. Use |
| # alloca.c instead on those machines. |
| LOADLIBES = |
| |
| # Any extra object files your system needs. |
| extras = amiga.o |
| |
| # Common prefix for machine-independent installed files. |
| prefix = |
| # Common prefix for machine-dependent installed files. |
| exec_prefix = |
| |
| # Directory to install `make' in. |
| bindir = sc:c |
| # Directory to find libraries in for `-lXXX'. |
| libdir = lib: |
| # Directory to search by default for included makefiles. |
| includedir = include: |
| # Directory to install the Info files in. |
| infodir = doc: |
| # Directory to install the man page in. |
| mandir = t: |
| # Number to put on the man page filename. |
| manext = 1 |
| # Prefix to put on installed `make' binary file name. |
| binprefix = |
| # Prefix to put on installed `make' man page file name. |
| manprefix = $(binprefix) |
| |
| # Whether or not make needs to be installed setgid. |
| # The value should be either `true' or `false'. |
| # On many systems, the getloadavg function (used to implement the `-l' |
| # switch) will not work unless make is installed setgid kmem. |
| install_setgid = false |
| # Install make setgid to this group so it can read /dev/kmem. |
| group = sys |
| |
| # Program to install `make'. |
| INSTALL_PROGRAM = copy |
| # Program to install the man page. |
| INSTALL_DATA = copy |
| # Generic install program. |
| INSTALL = copy |
| |
| # Program to format Texinfo source into Info files. |
| MAKEINFO = makeinfo |
| # Program to format Texinfo source into DVI files. |
| TEXI2DVI = texi2dvi |
| |
| # Programs to make tags files. |
| ETAGS = etags -w |
| CTAGS = ctags -w |
| |
| objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o \ |
| rule.o implicit.o default.o variable.o expand.o function.o \ |
| vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o \ |
| $(GLOB) $(GETOPT) $(ALLOCA) $(extras) |
| srcs = $(srcdir)commands.c $(srcdir)job.c $(srcdir)dir.c \ |
| $(srcdir)file.c $(srcdir)getloadavg.c $(srcdir)misc.c \ |
| $(srcdir)main.c $(srcdir)read.c $(srcdir)remake.c \ |
| $(srcdir)rule.c $(srcdir)implicit.c $(srcdir)default.c \ |
| $(srcdir)variable.c $(srcdir)expand.c $(srcdir)function.c \ |
| $(srcdir)vpath.c $(srcdir)version.c \ |
| $(srcdir)remote-$(REMOTE).c \ |
| $(srcdir)ar.c $(srcdir)arscan.c \ |
| $(srcdir)signame.c $(srcdir)signame.h $(GETOPT_SRC) \ |
| $(srcdir)commands.h $(srcdir)dep.h $(srcdir)file.h \ |
| $(srcdir)job.h $(srcdir)make.h $(srcdir)rule.h \ |
| $(srcdir)variable.h $(ALLOCA_SRC) $(srcdir)config.h.in |
| |
| |
| .SUFFIXES: |
| .SUFFIXES: .o .c .h .ps .dvi .info .texinfo |
| |
| all: make |
| info: make.info |
| dvi: make.dvi |
| # Some makes apparently use .PHONY as the default goal if it is before `all'. |
| .PHONY: all check info dvi |
| |
| make.info: make.texinfo |
| $(MAKEINFO) -I$(srcdir) $(srcdir)make.texinfo -o make.info |
| |
| make.dvi: make.texinfo |
| $(TEXI2DVI) $(srcdir)make.texinfo |
| |
| make.ps: make.dvi |
| dvi2ps make.dvi > make.ps |
| |
| make: $(objs) glob/glob.lib |
| $(CC) Link $(LDFLAGS) $(objs) $(LOADLIBES) To make.new |
| -delete quiet make |
| rename make.new make |
| |
| # -I. is needed to find config.h in the build directory. |
| .c.o: |
| $(CC) $(defines) IDir "" IDir $(srcdir)glob \ |
| $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION) |
| |
| glob/glob.lib: |
| execute << |
| cd glob |
| smake |
| < |
| |
| tagsrcs = $(srcs) $(srcdir)remote-*.c |
| TAGS: $(tagsrcs) |
| $(ETAGS) $(tagsrcs) |
| tags: $(tagsrcs) |
| $(CTAGS) $(tagsrcs) |
| |
| .PHONY: install installdirs |
| install: |
| copy make sc:c |
| |
| loadavg: loadavg.c config.h |
| $(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \ |
| loadavg.c $(LOADLIBES) -o $@ |
| |
| clean: glob-clean |
| -$(RM) -f make loadavg *.o core make.dvi |
| |
| distclean: clean glob-realclean |
| -$(RM) -f Makefile config.h config.status build.sh |
| -$(RM) -f config.log config.cache |
| -$(RM) -f TAGS tags |
| -$(RM) -f make.?? make.??s make.log make.toc make.*aux |
| -$(RM) -f loadavg.c |
| |
| realclean: distclean |
| -$(RM) -f make.info* |
| |
| mostlyclean: clean |
| |
| .PHONY: glob-clean glob-realclean |
| |
| glob-clean glob-realclean: |
| execute << |
| cd glob |
| smake $@ |
| < |