| Basic Installation |
| ================== |
| |
| The `configure' shell script attempts to guess correct values for |
| various system-dependent variables used during compilation. It uses |
| those values to create a `Makefile' in each directory of the package. |
| It may also create one or more `.h' files containing system-dependent |
| definitions. Finally, it creates a shell script `config.status' that |
| you can run in the future to recreate the current configuration, a file |
| `config.cache' that saves the results of its tests to speed up |
| reconfiguring, and a file `config.log' containing compiler output |
| (useful mainly for debugging `configure'). |
| |
| If you need to do unusual things to compile the package, please try |
| to figure out how `configure' could check whether to do them, and mail |
| diffs or instructions to the address given in the `README' so they can |
| be considered for the next release. If at some point `config.cache' |
| contains results you don't want to keep, you may remove or edit it. |
| |
| The file `configure.in' is used to create `configure' by a program |
| called `autoconf'. You only need `configure.in' if you want to change |
| it or regenerate `configure' using a newer version of `autoconf'. |
| |
| The simplest way to compile this package is: |
| |
| 1. `cd' to the directory containing the package's source code and type |
| `./configure' to configure the package for your system. If you're |
| using `csh' on an old version of System V, you might need to type |
| `sh ./configure' instead to prevent `csh' from trying to execute |
| `configure' itself. |
| |
| Running `configure' takes awhile. While running, it prints some |
| messages telling which features it is checking for. |
| |
| 2. Type `make' to compile the package. |
| |
| If you're building GNU make on a system which does not already have |
| a `make', you can use the build.sh shell script to compile. Run |
| `sh ./build.sh'. This should compile the program in the current |
| directory. Then you will have a Make program that you can use for |
| `make install', or whatever else. |
| |
| 3. Optionally, type `./make check' to run any self-tests that come with |
| the package. |
| |
| 4. Type `make install' to install the programs and any data files and |
| documentation. |
| |
| 5. You can remove the program binaries and object files from the |
| source code directory by typing `make clean'. To also remove the |
| files that `configure' created (so you can compile the package for |
| a different kind of computer), type `make distclean'. There is |
| also a `make maintainer-clean' target, but that is intended mainly |
| for the package's developers. If you use it, you may have to get |
| all sorts of other programs in order to regenerate files that came |
| with the distribution. |
| |
| Compilers and Options |
| ===================== |
| |
| Some systems require unusual options for compilation or linking that |
| the `configure' script does not know about. You can give `configure' |
| initial values for variables by setting them in the environment. Using |
| a Bourne-compatible shell, you can do that on the command line like |
| this: |
| CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure |
| |
| Or on systems that have the `env' program, you can do it like this: |
| env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure |
| |
| Compiling For Multiple Architectures |
| ==================================== |
| |
| You can compile the package for more than one kind of computer at the |
| same time, by placing the object files for each architecture in their |
| own directory. To do this, you must use a version of `make' that |
| supports the `VPATH' variable, such as GNU `make'. `cd' to the |
| directory where you want the object files and executables to go and run |
| the `configure' script. `configure' automatically checks for the |
| source code in the directory that `configure' is in and in `..'. |
| |
| If you have to use a `make' that does not supports the `VPATH' |
| variable, you have to compile the package for one architecture at a time |
| in the source code directory. After you have installed the package for |
| one architecture, use `make distclean' before reconfiguring for another |
| architecture. |
| |
| Installation Names |
| ================== |
| |
| By default, `make install' will install the package's files in |
| `/usr/local/bin', `/usr/local/man', etc. You can specify an |
| installation prefix other than `/usr/local' by giving `configure' the |
| option `--prefix=PATH'. |
| |
| You can specify separate installation prefixes for |
| architecture-specific files and architecture-independent files. If you |
| give `configure' the option `--exec-prefix=PATH', the package will use |
| PATH as the prefix for installing programs and libraries. |
| Documentation and other data files will still use the regular prefix. |
| |
| In addition, if you use an unusual directory layout you can give |
| options like `--bindir=PATH' to specify different values for particular |
| kinds of files. Run `configure --help' for a list of the directories |
| you can set and what kinds of files go in them. |
| |
| If the package supports it, you can cause programs to be installed |
| with an extra prefix or suffix on their names by giving `configure' the |
| option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. |
| |
| Optional Features |
| ================= |
| |
| Some packages pay attention to `--enable-FEATURE' options to |
| `configure', where FEATURE indicates an optional part of the package. |
| They may also pay attention to `--with-PACKAGE' options, where PACKAGE |
| is something like `gnu-as' or `x' (for the X Window System). The |
| `README' should mention any `--enable-' and `--with-' options that the |
| package recognizes. |
| |
| For packages that use the X Window System, `configure' can usually |
| find the X include and library files automatically, but if it doesn't, |
| you can use the `configure' options `--x-includes=DIR' and |
| `--x-libraries=DIR' to specify their locations. |
| |
| Specifying the System Type |
| ========================== |
| |
| There may be some features `configure' can not figure out |
| automatically, but needs to determine by the type of host the package |
| will run on. Usually `configure' can figure that out, but if it prints |
| a message saying it can not guess the host type, give it the |
| `--host=TYPE' option. TYPE can either be a short name for the system |
| type, such as `sun4', or a canonical name with three fields: |
| CPU-COMPANY-SYSTEM |
| |
| See the file `config.sub' for the possible values of each field. If |
| `config.sub' isn't included in this package, then this package doesn't |
| need to know the host type. |
| |
| If you are building compiler tools for cross-compiling, you can also |
| use the `--target=TYPE' option to select the type of system they will |
| produce code for and the `--build=TYPE' option to select the type of |
| system on which you are compiling the package. |
| |
| Sharing Defaults |
| ================ |
| |
| If you want to set default values for `configure' scripts to share, |
| you can create a site shell script called `config.site' that gives |
| default values for variables like `CC', `cache_file', and `prefix'. |
| `configure' looks for `PREFIX/share/config.site' if it exists, then |
| `PREFIX/etc/config.site' if it exists. Or, you can set the |
| `CONFIG_SITE' environment variable to the location of the site script. |
| A warning: not all `configure' scripts look for a site script. |
| |
| Operation Controls |
| ================== |
| |
| `configure' recognizes the following options to control how it |
| operates. |
| |
| `--cache-file=FILE' |
| Use and save the results of the tests in FILE instead of |
| `./config.cache'. Set FILE to `/dev/null' to disable caching, for |
| debugging `configure'. |
| |
| `--help' |
| Print a summary of the options to `configure', and exit. |
| |
| `--quiet' |
| `--silent' |
| `-q' |
| Do not print messages saying which checks are being made. To |
| suppress all normal output, redirect it to `/dev/null' (any error |
| messages will still be shown). |
| |
| `--srcdir=DIR' |
| Look for the package's source code in directory DIR. Usually |
| `configure' can determine that directory automatically. |
| |
| `--version' |
| Print the version of Autoconf used to generate the `configure' |
| script, and exit. |
| |
| `configure' also accepts some other, not widely useful, options. |
| |