blob: 7afb8814fe52d8967834d547fe4e89ad87353121 [file] [log] [blame]
//===- InstCombineSelect.cpp ----------------------------------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements the visitSelect function.
//
//===----------------------------------------------------------------------===//
#include "InstCombineInternal.h"
#include "llvm/Analysis/ConstantFolding.h"
#include "llvm/Analysis/InstructionSimplify.h"
#include "llvm/Analysis/ValueTracking.h"
#include "llvm/IR/MDBuilder.h"
#include "llvm/IR/PatternMatch.h"
#include "llvm/Support/KnownBits.h"
using namespace llvm;
using namespace PatternMatch;
#define DEBUG_TYPE "instcombine"
static SelectPatternFlavor
getInverseMinMaxSelectPattern(SelectPatternFlavor SPF) {
switch (SPF) {
default:
llvm_unreachable("unhandled!");
case SPF_SMIN:
return SPF_SMAX;
case SPF_UMIN:
return SPF_UMAX;
case SPF_SMAX:
return SPF_SMIN;
case SPF_UMAX:
return SPF_UMIN;
}
}
static CmpInst::Predicate getCmpPredicateForMinMax(SelectPatternFlavor SPF,
bool Ordered=false) {
switch (SPF) {
default:
llvm_unreachable("unhandled!");
case SPF_SMIN:
return ICmpInst::ICMP_SLT;
case SPF_UMIN:
return ICmpInst::ICMP_ULT;
case SPF_SMAX:
return ICmpInst::ICMP_SGT;
case SPF_UMAX:
return ICmpInst::ICMP_UGT;
case SPF_FMINNUM:
return Ordered ? FCmpInst::FCMP_OLT : FCmpInst::FCMP_ULT;
case SPF_FMAXNUM:
return Ordered ? FCmpInst::FCMP_OGT : FCmpInst::FCMP_UGT;
}
}
static Value *generateMinMaxSelectPattern(InstCombiner::BuilderTy *Builder,
SelectPatternFlavor SPF, Value *A,
Value *B) {
CmpInst::Predicate Pred = getCmpPredicateForMinMax(SPF);
assert(CmpInst::isIntPredicate(Pred));
return Builder->CreateSelect(Builder->CreateICmp(Pred, A, B), A, B);
}
/// We want to turn code that looks like this:
/// %C = or %A, %B
/// %D = select %cond, %C, %A
/// into:
/// %C = select %cond, %B, 0
/// %D = or %A, %C
///
/// Assuming that the specified instruction is an operand to the select, return
/// a bitmask indicating which operands of this instruction are foldable if they
/// equal the other incoming value of the select.
///
static unsigned getSelectFoldableOperands(Instruction *I) {
switch (I->getOpcode()) {
case Instruction::Add:
case Instruction::Mul:
case Instruction::And:
case Instruction::Or:
case Instruction::Xor:
return 3; // Can fold through either operand.
case Instruction::Sub: // Can only fold on the amount subtracted.
case Instruction::Shl: // Can only fold on the shift amount.
case Instruction::LShr:
case Instruction::AShr:
return 1;
default:
return 0; // Cannot fold
}
}
/// For the same transformation as the previous function, return the identity
/// constant that goes into the select.
static Constant *getSelectFoldableConstant(Instruction *I) {
switch (I->getOpcode()) {
default: llvm_unreachable("This cannot happen!");
case Instruction::Add:
case Instruction::Sub:
case Instruction::Or:
case Instruction::Xor:
case Instruction::Shl:
case Instruction::LShr:
case Instruction::AShr:
return Constant::getNullValue(I->getType());
case Instruction::And:
return Constant::getAllOnesValue(I->getType());
case Instruction::Mul:
return ConstantInt::get(I->getType(), 1);
}
}
/// We have (select c, TI, FI), and we know that TI and FI have the same opcode.
Instruction *InstCombiner::foldSelectOpOp(SelectInst &SI, Instruction *TI,
Instruction *FI) {
// Don't break up min/max patterns. The hasOneUse checks below prevent that
// for most cases, but vector min/max with bitcasts can be transformed. If the
// one-use restrictions are eased for other patterns, we still don't want to
// obfuscate min/max.
if ((match(&SI, m_SMin(m_Value(), m_Value())) ||
match(&SI, m_SMax(m_Value(), m_Value())) ||
match(&SI, m_UMin(m_Value(), m_Value())) ||
match(&SI, m_UMax(m_Value(), m_Value()))))
return nullptr;
// If this is a cast from the same type, merge.
if (TI->getNumOperands() == 1 && TI->isCast()) {
Type *FIOpndTy = FI->getOperand(0)->getType();
if (TI->getOperand(0)->getType() != FIOpndTy)
return nullptr;
// The select condition may be a vector. We may only change the operand
// type if the vector width remains the same (and matches the condition).
Type *CondTy = SI.getCondition()->getType();
if (CondTy->isVectorTy()) {
if (!FIOpndTy->isVectorTy())
return nullptr;
if (CondTy->getVectorNumElements() != FIOpndTy->getVectorNumElements())
return nullptr;
// TODO: If the backend knew how to deal with casts better, we could
// remove this limitation. For now, there's too much potential to create
// worse codegen by promoting the select ahead of size-altering casts
// (PR28160).
//
// Note that ValueTracking's matchSelectPattern() looks through casts
// without checking 'hasOneUse' when it matches min/max patterns, so this
// transform may end up happening anyway.
if (TI->getOpcode() != Instruction::BitCast &&
(!TI->hasOneUse() || !FI->hasOneUse()))
return nullptr;
} else if (!TI->hasOneUse() || !FI->hasOneUse()) {
// TODO: The one-use restrictions for a scalar select could be eased if
// the fold of a select in visitLoadInst() was enhanced to match a pattern
// that includes a cast.
return nullptr;
}
// Fold this by inserting a select from the input values.
Value *NewSI =
Builder->CreateSelect(SI.getCondition(), TI->getOperand(0),
FI->getOperand(0), SI.getName() + ".v", &SI);
return CastInst::Create(Instruction::CastOps(TI->getOpcode()), NewSI,
TI->getType());
}
// Only handle binary operators with one-use here. As with the cast case
// above, it may be possible to relax the one-use constraint, but that needs
// be examined carefully since it may not reduce the total number of
// instructions.
BinaryOperator *BO = dyn_cast<BinaryOperator>(TI);
if (!BO || !TI->hasOneUse() || !FI->hasOneUse())
return nullptr;
// Figure out if the operations have any operands in common.
Value *MatchOp, *OtherOpT, *OtherOpF;
bool MatchIsOpZero;
if (TI->getOperand(0) == FI->getOperand(0)) {
MatchOp = TI->getOperand(0);
OtherOpT = TI->getOperand(1);
OtherOpF = FI->getOperand(1);
MatchIsOpZero = true;
} else if (TI->getOperand(1) == FI->getOperand(1)) {
MatchOp = TI->getOperand(1);
OtherOpT = TI->getOperand(0);
OtherOpF = FI->getOperand(0);
MatchIsOpZero = false;
} else if (!TI->isCommutative()) {
return nullptr;
} else if (TI->getOperand(0) == FI->getOperand(1)) {
MatchOp = TI->getOperand(0);
OtherOpT = TI->getOperand(1);
OtherOpF = FI->getOperand(0);
MatchIsOpZero = true;
} else if (TI->getOperand(1) == FI->getOperand(0)) {
MatchOp = TI->getOperand(1);
OtherOpT = TI->getOperand(0);
OtherOpF = FI->getOperand(1);
MatchIsOpZero = true;
} else {
return nullptr;
}
// If we reach here, they do have operations in common.
Value *NewSI = Builder->CreateSelect(SI.getCondition(), OtherOpT, OtherOpF,
SI.getName() + ".v", &SI);
Value *Op0 = MatchIsOpZero ? MatchOp : NewSI;
Value *Op1 = MatchIsOpZero ? NewSI : MatchOp;
return BinaryOperator::Create(BO->getOpcode(), Op0, Op1);
}
static bool isSelect01(Constant *C1, Constant *C2) {
ConstantInt *C1I = dyn_cast<ConstantInt>(C1);
if (!C1I)
return false;
ConstantInt *C2I = dyn_cast<ConstantInt>(C2);
if (!C2I)
return false;
if (!C1I->isZero() && !C2I->isZero()) // One side must be zero.
return false;
return C1I->isOne() || C1I->isAllOnesValue() ||
C2I->isOne() || C2I->isAllOnesValue();
}
/// Try to fold the select into one of the operands to allow further
/// optimization.
Instruction *InstCombiner::foldSelectIntoOp(SelectInst &SI, Value *TrueVal,
Value *FalseVal) {
// See the comment above GetSelectFoldableOperands for a description of the
// transformation we are doing here.
if (Instruction *TVI = dyn_cast<Instruction>(TrueVal)) {
if (TVI->hasOneUse() && TVI->getNumOperands() == 2 &&
!isa<Constant>(FalseVal)) {
if (unsigned SFO = getSelectFoldableOperands(TVI)) {
unsigned OpToFold = 0;
if ((SFO & 1) && FalseVal == TVI->getOperand(0)) {
OpToFold = 1;
} else if ((SFO & 2) && FalseVal == TVI->getOperand(1)) {
OpToFold = 2;
}
if (OpToFold) {
Constant *C = getSelectFoldableConstant(TVI);
Value *OOp = TVI->getOperand(2-OpToFold);
// Avoid creating select between 2 constants unless it's selecting
// between 0, 1 and -1.
if (!isa<Constant>(OOp) || isSelect01(C, cast<Constant>(OOp))) {
Value *NewSel = Builder->CreateSelect(SI.getCondition(), OOp, C);
NewSel->takeName(TVI);
BinaryOperator *TVI_BO = cast<BinaryOperator>(TVI);
BinaryOperator *BO = BinaryOperator::Create(TVI_BO->getOpcode(),
FalseVal, NewSel);
BO->copyIRFlags(TVI_BO);
return BO;
}
}
}
}
}
if (Instruction *FVI = dyn_cast<Instruction>(FalseVal)) {
if (FVI->hasOneUse() && FVI->getNumOperands() == 2 &&
!isa<Constant>(TrueVal)) {
if (unsigned SFO = getSelectFoldableOperands(FVI)) {
unsigned OpToFold = 0;
if ((SFO & 1) && TrueVal == FVI->getOperand(0)) {
OpToFold = 1;
} else if ((SFO & 2) && TrueVal == FVI->getOperand(1)) {
OpToFold = 2;
}
if (OpToFold) {
Constant *C = getSelectFoldableConstant(FVI);
Value *OOp = FVI->getOperand(2-OpToFold);
// Avoid creating select between 2 constants unless it's selecting
// between 0, 1 and -1.
if (!isa<Constant>(OOp) || isSelect01(C, cast<Constant>(OOp))) {
Value *NewSel = Builder->CreateSelect(SI.getCondition(), C, OOp);
NewSel->takeName(FVI);
BinaryOperator *FVI_BO = cast<BinaryOperator>(FVI);
BinaryOperator *BO = BinaryOperator::Create(FVI_BO->getOpcode(),
TrueVal, NewSel);
BO->copyIRFlags(FVI_BO);
return BO;
}
}
}
}
}
return nullptr;
}
/// We want to turn:
/// (select (icmp eq (and X, C1), 0), Y, (or Y, C2))
/// into:
/// (or (shl (and X, C1), C3), y)
/// iff:
/// C1 and C2 are both powers of 2
/// where:
/// C3 = Log(C2) - Log(C1)
///
/// This transform handles cases where:
/// 1. The icmp predicate is inverted
/// 2. The select operands are reversed
/// 3. The magnitude of C2 and C1 are flipped
static Value *foldSelectICmpAndOr(const SelectInst &SI, Value *TrueVal,
Value *FalseVal,
InstCombiner::BuilderTy *Builder) {
const ICmpInst *IC = dyn_cast<ICmpInst>(SI.getCondition());
if (!IC || !IC->isEquality() || !SI.getType()->isIntegerTy())
return nullptr;
Value *CmpLHS = IC->getOperand(0);
Value *CmpRHS = IC->getOperand(1);
if (!match(CmpRHS, m_Zero()))
return nullptr;
Value *X;
const APInt *C1;
if (!match(CmpLHS, m_And(m_Value(X), m_Power2(C1))))
return nullptr;
const APInt *C2;
bool OrOnTrueVal = false;
bool OrOnFalseVal = match(FalseVal, m_Or(m_Specific(TrueVal), m_Power2(C2)));
if (!OrOnFalseVal)
OrOnTrueVal = match(TrueVal, m_Or(m_Specific(FalseVal), m_Power2(C2)));
if (!OrOnFalseVal && !OrOnTrueVal)
return nullptr;
Value *V = CmpLHS;
Value *Y = OrOnFalseVal ? TrueVal : FalseVal;
unsigned C1Log = C1->logBase2();
unsigned C2Log = C2->logBase2();
if (C2Log > C1Log) {
V = Builder->CreateZExtOrTrunc(V, Y->getType());
V = Builder->CreateShl(V, C2Log - C1Log);
} else if (C1Log > C2Log) {
V = Builder->CreateLShr(V, C1Log - C2Log);
V = Builder->CreateZExtOrTrunc(V, Y->getType());
} else
V = Builder->CreateZExtOrTrunc(V, Y->getType());
ICmpInst::Predicate Pred = IC->getPredicate();
if ((Pred == ICmpInst::ICMP_NE && OrOnFalseVal) ||
(Pred == ICmpInst::ICMP_EQ && OrOnTrueVal))
V = Builder->CreateXor(V, *C2);
return Builder->CreateOr(V, Y);
}
/// Attempt to fold a cttz/ctlz followed by a icmp plus select into a single
/// call to cttz/ctlz with flag 'is_zero_undef' cleared.
///
/// For example, we can fold the following code sequence:
/// \code
/// %0 = tail call i32 @llvm.cttz.i32(i32 %x, i1 true)
/// %1 = icmp ne i32 %x, 0
/// %2 = select i1 %1, i32 %0, i32 32
/// \code
///
/// into:
/// %0 = tail call i32 @llvm.cttz.i32(i32 %x, i1 false)
static Value *foldSelectCttzCtlz(ICmpInst *ICI, Value *TrueVal, Value *FalseVal,
InstCombiner::BuilderTy *Builder) {
ICmpInst::Predicate Pred = ICI->getPredicate();
Value *CmpLHS = ICI->getOperand(0);
Value *CmpRHS = ICI->getOperand(1);
// Check if the condition value compares a value for equality against zero.
if (!ICI->isEquality() || !match(CmpRHS, m_Zero()))
return nullptr;
Value *Count = FalseVal;
Value *ValueOnZero = TrueVal;
if (Pred == ICmpInst::ICMP_NE)
std::swap(Count, ValueOnZero);
// Skip zero extend/truncate.
Value *V = nullptr;
if (match(Count, m_ZExt(m_Value(V))) ||
match(Count, m_Trunc(m_Value(V))))
Count = V;
// Check if the value propagated on zero is a constant number equal to the
// sizeof in bits of 'Count'.
unsigned SizeOfInBits = Count->getType()->getScalarSizeInBits();
if (!match(ValueOnZero, m_SpecificInt(SizeOfInBits)))
return nullptr;
// Check that 'Count' is a call to intrinsic cttz/ctlz. Also check that the
// input to the cttz/ctlz is used as LHS for the compare instruction.
if (match(Count, m_Intrinsic<Intrinsic::cttz>(m_Specific(CmpLHS))) ||
match(Count, m_Intrinsic<Intrinsic::ctlz>(m_Specific(CmpLHS)))) {
IntrinsicInst *II = cast<IntrinsicInst>(Count);
// Explicitly clear the 'undef_on_zero' flag.
IntrinsicInst *NewI = cast<IntrinsicInst>(II->clone());
Type *Ty = NewI->getArgOperand(1)->getType();
NewI->setArgOperand(1, Constant::getNullValue(Ty));
Builder->Insert(NewI);
return Builder->CreateZExtOrTrunc(NewI, ValueOnZero->getType());
}
return nullptr;
}
/// Return true if we find and adjust an icmp+select pattern where the compare
/// is with a constant that can be incremented or decremented to match the
/// minimum or maximum idiom.
static bool adjustMinMax(SelectInst &Sel, ICmpInst &Cmp) {
ICmpInst::Predicate Pred = Cmp.getPredicate();
Value *CmpLHS = Cmp.getOperand(0);
Value *CmpRHS = Cmp.getOperand(1);
Value *TrueVal = Sel.getTrueValue();
Value *FalseVal = Sel.getFalseValue();
// We may move or edit the compare, so make sure the select is the only user.
const APInt *CmpC;
if (!Cmp.hasOneUse() || !match(CmpRHS, m_APInt(CmpC)))
return false;
// These transforms only work for selects of integers or vector selects of
// integer vectors.
Type *SelTy = Sel.getType();
auto *SelEltTy = dyn_cast<IntegerType>(SelTy->getScalarType());
if (!SelEltTy || SelTy->isVectorTy() != Cmp.getType()->isVectorTy())
return false;
Constant *AdjustedRHS;
if (Pred == ICmpInst::ICMP_UGT || Pred == ICmpInst::ICMP_SGT)
AdjustedRHS = ConstantInt::get(CmpRHS->getType(), *CmpC + 1);
else if (Pred == ICmpInst::ICMP_ULT || Pred == ICmpInst::ICMP_SLT)
AdjustedRHS = ConstantInt::get(CmpRHS->getType(), *CmpC - 1);
else
return false;
// X > C ? X : C+1 --> X < C+1 ? C+1 : X
// X < C ? X : C-1 --> X > C-1 ? C-1 : X
if ((CmpLHS == TrueVal && AdjustedRHS == FalseVal) ||
(CmpLHS == FalseVal && AdjustedRHS == TrueVal)) {
; // Nothing to do here. Values match without any sign/zero extension.
}
// Types do not match. Instead of calculating this with mixed types, promote
// all to the larger type. This enables scalar evolution to analyze this
// expression.
else if (CmpRHS->getType()->getScalarSizeInBits() < SelEltTy->getBitWidth()) {
Constant *SextRHS = ConstantExpr::getSExt(AdjustedRHS, SelTy);
// X = sext x; x >s c ? X : C+1 --> X = sext x; X <s C+1 ? C+1 : X
// X = sext x; x <s c ? X : C-1 --> X = sext x; X >s C-1 ? C-1 : X
// X = sext x; x >u c ? X : C+1 --> X = sext x; X <u C+1 ? C+1 : X
// X = sext x; x <u c ? X : C-1 --> X = sext x; X >u C-1 ? C-1 : X
if (match(TrueVal, m_SExt(m_Specific(CmpLHS))) && SextRHS == FalseVal) {
CmpLHS = TrueVal;
AdjustedRHS = SextRHS;
} else if (match(FalseVal, m_SExt(m_Specific(CmpLHS))) &&
SextRHS == TrueVal) {
CmpLHS = FalseVal;
AdjustedRHS = SextRHS;
} else if (Cmp.isUnsigned()) {
Constant *ZextRHS = ConstantExpr::getZExt(AdjustedRHS, SelTy);
// X = zext x; x >u c ? X : C+1 --> X = zext x; X <u C+1 ? C+1 : X
// X = zext x; x <u c ? X : C-1 --> X = zext x; X >u C-1 ? C-1 : X
// zext + signed compare cannot be changed:
// 0xff <s 0x00, but 0x00ff >s 0x0000
if (match(TrueVal, m_ZExt(m_Specific(CmpLHS))) && ZextRHS == FalseVal) {
CmpLHS = TrueVal;
AdjustedRHS = ZextRHS;
} else if (match(FalseVal, m_ZExt(m_Specific(CmpLHS))) &&
ZextRHS == TrueVal) {
CmpLHS = FalseVal;
AdjustedRHS = ZextRHS;
} else {
return false;
}
} else {
return false;
}
} else {
return false;
}
Pred = ICmpInst::getSwappedPredicate(Pred);
CmpRHS = AdjustedRHS;
std::swap(FalseVal, TrueVal);
Cmp.setPredicate(Pred);
Cmp.setOperand(0, CmpLHS);
Cmp.setOperand(1, CmpRHS);
Sel.setOperand(1, TrueVal);
Sel.setOperand(2, FalseVal);
Sel.swapProfMetadata();
// Move the compare instruction right before the select instruction. Otherwise
// the sext/zext value may be defined after the compare instruction uses it.
Cmp.moveBefore(&Sel);
return true;
}
/// If this is an integer min/max (icmp + select) with a constant operand,
/// create the canonical icmp for the min/max operation and canonicalize the
/// constant to the 'false' operand of the select:
/// select (icmp Pred X, C1), C2, X --> select (icmp Pred' X, C2), X, C2
/// Note: if C1 != C2, this will change the icmp constant to the existing
/// constant operand of the select.
static Instruction *
canonicalizeMinMaxWithConstant(SelectInst &Sel, ICmpInst &Cmp,
InstCombiner::BuilderTy &Builder) {
if (!Cmp.hasOneUse() || !isa<Constant>(Cmp.getOperand(1)))
return nullptr;
// Canonicalize the compare predicate based on whether we have min or max.
Value *LHS, *RHS;
ICmpInst::Predicate NewPred;
SelectPatternResult SPR = matchSelectPattern(&Sel, LHS, RHS);
switch (SPR.Flavor) {
case SPF_SMIN: NewPred = ICmpInst::ICMP_SLT; break;
case SPF_UMIN: NewPred = ICmpInst::ICMP_ULT; break;
case SPF_SMAX: NewPred = ICmpInst::ICMP_SGT; break;
case SPF_UMAX: NewPred = ICmpInst::ICMP_UGT; break;
default: return nullptr;
}
// Is this already canonical?
if (Cmp.getOperand(0) == LHS && Cmp.getOperand(1) == RHS &&
Cmp.getPredicate() == NewPred)
return nullptr;
// Create the canonical compare and plug it into the select.
Sel.setCondition(Builder.CreateICmp(NewPred, LHS, RHS));
// If the select operands did not change, we're done.
if (Sel.getTrueValue() == LHS && Sel.getFalseValue() == RHS)
return &Sel;
// If we are swapping the select operands, swap the metadata too.
assert(Sel.getTrueValue() == RHS && Sel.getFalseValue() == LHS &&
"Unexpected results from matchSelectPattern");
Sel.setTrueValue(LHS);
Sel.setFalseValue(RHS);
Sel.swapProfMetadata();
return &Sel;
}
/// Visit a SelectInst that has an ICmpInst as its first operand.
Instruction *InstCombiner::foldSelectInstWithICmp(SelectInst &SI,
ICmpInst *ICI) {
if (Instruction *NewSel = canonicalizeMinMaxWithConstant(SI, *ICI, *Builder))
return NewSel;
bool Changed = adjustMinMax(SI, *ICI);
ICmpInst::Predicate Pred = ICI->getPredicate();
Value *CmpLHS = ICI->getOperand(0);
Value *CmpRHS = ICI->getOperand(1);
Value *TrueVal = SI.getTrueValue();
Value *FalseVal = SI.getFalseValue();
// Transform (X >s -1) ? C1 : C2 --> ((X >>s 31) & (C2 - C1)) + C1
// and (X <s 0) ? C2 : C1 --> ((X >>s 31) & (C2 - C1)) + C1
// FIXME: Type and constness constraints could be lifted, but we have to
// watch code size carefully. We should consider xor instead of
// sub/add when we decide to do that.
if (IntegerType *Ty = dyn_cast<IntegerType>(CmpLHS->getType())) {
if (TrueVal->getType() == Ty) {
if (ConstantInt *Cmp = dyn_cast<ConstantInt>(CmpRHS)) {
ConstantInt *C1 = nullptr, *C2 = nullptr;
if (Pred == ICmpInst::ICMP_SGT && Cmp->isAllOnesValue()) {
C1 = dyn_cast<ConstantInt>(TrueVal);
C2 = dyn_cast<ConstantInt>(FalseVal);
} else if (Pred == ICmpInst::ICMP_SLT && Cmp->isNullValue()) {
C1 = dyn_cast<ConstantInt>(FalseVal);
C2 = dyn_cast<ConstantInt>(TrueVal);
}
if (C1 && C2) {
// This shift results in either -1 or 0.
Value *AShr = Builder->CreateAShr(CmpLHS, Ty->getBitWidth()-1);
// Check if we can express the operation with a single or.
if (C2->isAllOnesValue())
return replaceInstUsesWith(SI, Builder->CreateOr(AShr, C1));
Value *And = Builder->CreateAnd(AShr, C2->getValue()-C1->getValue());
return replaceInstUsesWith(SI, Builder->CreateAdd(And, C1));
}
}
}
}
// NOTE: if we wanted to, this is where to detect integer MIN/MAX
if (CmpRHS != CmpLHS && isa<Constant>(CmpRHS)) {
if (CmpLHS == TrueVal && Pred == ICmpInst::ICMP_EQ) {
// Transform (X == C) ? X : Y -> (X == C) ? C : Y
SI.setOperand(1, CmpRHS);
Changed = true;
} else if (CmpLHS == FalseVal && Pred == ICmpInst::ICMP_NE) {
// Transform (X != C) ? Y : X -> (X != C) ? Y : C
SI.setOperand(2, CmpRHS);
Changed = true;
}
}
// FIXME: This code is nearly duplicated in InstSimplify. Using/refactoring
// decomposeBitTestICmp() might help.
{
unsigned BitWidth =
DL.getTypeSizeInBits(TrueVal->getType()->getScalarType());
APInt MinSignedValue = APInt::getSignedMinValue(BitWidth);
Value *X;
const APInt *Y, *C;
bool TrueWhenUnset;
bool IsBitTest = false;
if (ICmpInst::isEquality(Pred) &&
match(CmpLHS, m_And(m_Value(X), m_Power2(Y))) &&
match(CmpRHS, m_Zero())) {
IsBitTest = true;
TrueWhenUnset = Pred == ICmpInst::ICMP_EQ;
} else if (Pred == ICmpInst::ICMP_SLT && match(CmpRHS, m_Zero())) {
X = CmpLHS;
Y = &MinSignedValue;
IsBitTest = true;
TrueWhenUnset = false;
} else if (Pred == ICmpInst::ICMP_SGT && match(CmpRHS, m_AllOnes())) {
X = CmpLHS;
Y = &MinSignedValue;
IsBitTest = true;
TrueWhenUnset = true;
}
if (IsBitTest) {
Value *V = nullptr;
// (X & Y) == 0 ? X : X ^ Y --> X & ~Y
if (TrueWhenUnset && TrueVal == X &&
match(FalseVal, m_Xor(m_Specific(X), m_APInt(C))) && *Y == *C)
V = Builder->CreateAnd(X, ~(*Y));
// (X & Y) != 0 ? X ^ Y : X --> X & ~Y
else if (!TrueWhenUnset && FalseVal == X &&
match(TrueVal, m_Xor(m_Specific(X), m_APInt(C))) && *Y == *C)
V = Builder->CreateAnd(X, ~(*Y));
// (X & Y) == 0 ? X ^ Y : X --> X | Y
else if (TrueWhenUnset && FalseVal == X &&
match(TrueVal, m_Xor(m_Specific(X), m_APInt(C))) && *Y == *C)
V = Builder->CreateOr(X, *Y);
// (X & Y) != 0 ? X : X ^ Y --> X | Y
else if (!TrueWhenUnset && TrueVal == X &&
match(FalseVal, m_Xor(m_Specific(X), m_APInt(C))) && *Y == *C)
V = Builder->CreateOr(X, *Y);
if (V)
return replaceInstUsesWith(SI, V);
}
}
if (Value *V = foldSelectICmpAndOr(SI, TrueVal, FalseVal, Builder))
return replaceInstUsesWith(SI, V);
if (Value *V = foldSelectCttzCtlz(ICI, TrueVal, FalseVal, Builder))
return replaceInstUsesWith(SI, V);
return Changed ? &SI : nullptr;
}
/// SI is a select whose condition is a PHI node (but the two may be in
/// different blocks). See if the true/false values (V) are live in all of the
/// predecessor blocks of the PHI. For example, cases like this can't be mapped:
///
/// X = phi [ C1, BB1], [C2, BB2]
/// Y = add
/// Z = select X, Y, 0
///
/// because Y is not live in BB1/BB2.
///
static bool canSelectOperandBeMappingIntoPredBlock(const Value *V,
const SelectInst &SI) {
// If the value is a non-instruction value like a constant or argument, it
// can always be mapped.
const Instruction *I = dyn_cast<Instruction>(V);
if (!I) return true;
// If V is a PHI node defined in the same block as the condition PHI, we can
// map the arguments.
const PHINode *CondPHI = cast<PHINode>(SI.getCondition());
if (const PHINode *VP = dyn_cast<PHINode>(I))
if (VP->getParent() == CondPHI->getParent())
return true;
// Otherwise, if the PHI and select are defined in the same block and if V is
// defined in a different block, then we can transform it.
if (SI.getParent() == CondPHI->getParent() &&
I->getParent() != CondPHI->getParent())
return true;
// Otherwise we have a 'hard' case and we can't tell without doing more
// detailed dominator based analysis, punt.
return false;
}
/// We have an SPF (e.g. a min or max) of an SPF of the form:
/// SPF2(SPF1(A, B), C)
Instruction *InstCombiner::foldSPFofSPF(Instruction *Inner,
SelectPatternFlavor SPF1,
Value *A, Value *B,
Instruction &Outer,
SelectPatternFlavor SPF2, Value *C) {
if (Outer.getType() != Inner->getType())
return nullptr;
if (C == A || C == B) {
// MAX(MAX(A, B), B) -> MAX(A, B)
// MIN(MIN(a, b), a) -> MIN(a, b)
if (SPF1 == SPF2)
return replaceInstUsesWith(Outer, Inner);
// MAX(MIN(a, b), a) -> a
// MIN(MAX(a, b), a) -> a
if ((SPF1 == SPF_SMIN && SPF2 == SPF_SMAX) ||
(SPF1 == SPF_SMAX && SPF2 == SPF_SMIN) ||
(SPF1 == SPF_UMIN && SPF2 == SPF_UMAX) ||
(SPF1 == SPF_UMAX && SPF2 == SPF_UMIN))
return replaceInstUsesWith(Outer, C);
}
if (SPF1 == SPF2) {
const APInt *CB, *CC;
if (match(B, m_APInt(CB)) && match(C, m_APInt(CC))) {
// MIN(MIN(A, 23), 97) -> MIN(A, 23)
// MAX(MAX(A, 97), 23) -> MAX(A, 97)
if ((SPF1 == SPF_UMIN && CB->ule(*CC)) ||
(SPF1 == SPF_SMIN && CB->sle(*CC)) ||
(SPF1 == SPF_UMAX && CB->uge(*CC)) ||
(SPF1 == SPF_SMAX && CB->sge(*CC)))
return replaceInstUsesWith(Outer, Inner);
// MIN(MIN(A, 97), 23) -> MIN(A, 23)
// MAX(MAX(A, 23), 97) -> MAX(A, 97)
if ((SPF1 == SPF_UMIN && CB->ugt(*CC)) ||
(SPF1 == SPF_SMIN && CB->sgt(*CC)) ||
(SPF1 == SPF_UMAX && CB->ult(*CC)) ||
(SPF1 == SPF_SMAX && CB->slt(*CC))) {
Outer.replaceUsesOfWith(Inner, A);
return &Outer;
}
}
}
// ABS(ABS(X)) -> ABS(X)
// NABS(NABS(X)) -> NABS(X)
if (SPF1 == SPF2 && (SPF1 == SPF_ABS || SPF1 == SPF_NABS)) {
return replaceInstUsesWith(Outer, Inner);
}
// ABS(NABS(X)) -> ABS(X)
// NABS(ABS(X)) -> NABS(X)
if ((SPF1 == SPF_ABS && SPF2 == SPF_NABS) ||
(SPF1 == SPF_NABS && SPF2 == SPF_ABS)) {
SelectInst *SI = cast<SelectInst>(Inner);
Value *NewSI =
Builder->CreateSelect(SI->getCondition(), SI->getFalseValue(),
SI->getTrueValue(), SI->getName(), SI);
return replaceInstUsesWith(Outer, NewSI);
}
auto IsFreeOrProfitableToInvert =
[&](Value *V, Value *&NotV, bool &ElidesXor) {
if (match(V, m_Not(m_Value(NotV)))) {
// If V has at most 2 uses then we can get rid of the xor operation
// entirely.
ElidesXor |= !V->hasNUsesOrMore(3);
return true;
}
if (IsFreeToInvert(V, !V->hasNUsesOrMore(3))) {
NotV = nullptr;
return true;
}
return false;
};
Value *NotA, *NotB, *NotC;
bool ElidesXor = false;
// MIN(MIN(~A, ~B), ~C) == ~MAX(MAX(A, B), C)
// MIN(MAX(~A, ~B), ~C) == ~MAX(MIN(A, B), C)
// MAX(MIN(~A, ~B), ~C) == ~MIN(MAX(A, B), C)
// MAX(MAX(~A, ~B), ~C) == ~MIN(MIN(A, B), C)
//
// This transform is performance neutral if we can elide at least one xor from
// the set of three operands, since we'll be tacking on an xor at the very
// end.
if (SelectPatternResult::isMinOrMax(SPF1) &&
SelectPatternResult::isMinOrMax(SPF2) &&
IsFreeOrProfitableToInvert(A, NotA, ElidesXor) &&
IsFreeOrProfitableToInvert(B, NotB, ElidesXor) &&
IsFreeOrProfitableToInvert(C, NotC, ElidesXor) && ElidesXor) {
if (!NotA)
NotA = Builder->CreateNot(A);
if (!NotB)
NotB = Builder->CreateNot(B);
if (!NotC)
NotC = Builder->CreateNot(C);
Value *NewInner = generateMinMaxSelectPattern(
Builder, getInverseMinMaxSelectPattern(SPF1), NotA, NotB);
Value *NewOuter = Builder->CreateNot(generateMinMaxSelectPattern(
Builder, getInverseMinMaxSelectPattern(SPF2), NewInner, NotC));
return replaceInstUsesWith(Outer, NewOuter);
}
return nullptr;
}
/// If one of the constants is zero (we know they can't both be) and we have an
/// icmp instruction with zero, and we have an 'and' with the non-constant value
/// and a power of two we can turn the select into a shift on the result of the
/// 'and'.
static Value *foldSelectICmpAnd(const SelectInst &SI, ConstantInt *TrueVal,
ConstantInt *FalseVal,
InstCombiner::BuilderTy *Builder) {
const ICmpInst *IC = dyn_cast<ICmpInst>(SI.getCondition());
if (!IC || !IC->isEquality() || !SI.getType()->isIntegerTy())
return nullptr;
if (!match(IC->getOperand(1), m_Zero()))
return nullptr;
ConstantInt *AndRHS;
Value *LHS = IC->getOperand(0);
if (!match(LHS, m_And(m_Value(), m_ConstantInt(AndRHS))))
return nullptr;
// If both select arms are non-zero see if we have a select of the form
// 'x ? 2^n + C : C'. Then we can offset both arms by C, use the logic
// for 'x ? 2^n : 0' and fix the thing up at the end.
ConstantInt *Offset = nullptr;
if (!TrueVal->isZero() && !FalseVal->isZero()) {
if ((TrueVal->getValue() - FalseVal->getValue()).isPowerOf2())
Offset = FalseVal;
else if ((FalseVal->getValue() - TrueVal->getValue()).isPowerOf2())
Offset = TrueVal;
else
return nullptr;
// Adjust TrueVal and FalseVal to the offset.
TrueVal = ConstantInt::get(Builder->getContext(),
TrueVal->getValue() - Offset->getValue());
FalseVal = ConstantInt::get(Builder->getContext(),
FalseVal->getValue() - Offset->getValue());
}
// Make sure the mask in the 'and' and one of the select arms is a power of 2.
if (!AndRHS->getValue().isPowerOf2() ||
(!TrueVal->getValue().isPowerOf2() &&
!FalseVal->getValue().isPowerOf2()))
return nullptr;
// Determine which shift is needed to transform result of the 'and' into the
// desired result.
ConstantInt *ValC = !TrueVal->isZero() ? TrueVal : FalseVal;
unsigned ValZeros = ValC->getValue().logBase2();
unsigned AndZeros = AndRHS->getValue().logBase2();
// If types don't match we can still convert the select by introducing a zext
// or a trunc of the 'and'. The trunc case requires that all of the truncated
// bits are zero, we can figure that out by looking at the 'and' mask.
if (AndZeros >= ValC->getBitWidth())
return nullptr;
Value *V = Builder->CreateZExtOrTrunc(LHS, SI.getType());
if (ValZeros > AndZeros)
V = Builder->CreateShl(V, ValZeros - AndZeros);
else if (ValZeros < AndZeros)
V = Builder->CreateLShr(V, AndZeros - ValZeros);
// Okay, now we know that everything is set up, we just don't know whether we
// have a icmp_ne or icmp_eq and whether the true or false val is the zero.
bool ShouldNotVal = !TrueVal->isZero();
ShouldNotVal ^= IC->getPredicate() == ICmpInst::ICMP_NE;
if (ShouldNotVal)
V = Builder->CreateXor(V, ValC);
// Apply an offset if needed.
if (Offset)
V = Builder->CreateAdd(V, Offset);
return V;
}
/// Turn select C, (X + Y), (X - Y) --> (X + (select C, Y, (-Y))).
/// This is even legal for FP.
static Instruction *foldAddSubSelect(SelectInst &SI,
InstCombiner::BuilderTy &Builder) {
Value *CondVal = SI.getCondition();
Value *TrueVal = SI.getTrueValue();
Value *FalseVal = SI.getFalseValue();
auto *TI = dyn_cast<Instruction>(TrueVal);
auto *FI = dyn_cast<Instruction>(FalseVal);
if (!TI || !FI || !TI->hasOneUse() || !FI->hasOneUse())
return nullptr;
Instruction *AddOp = nullptr, *SubOp = nullptr;
if ((TI->getOpcode() == Instruction::Sub &&
FI->getOpcode() == Instruction::Add) ||
(TI->getOpcode() == Instruction::FSub &&
FI->getOpcode() == Instruction::FAdd)) {
AddOp = FI;
SubOp = TI;
} else if ((FI->getOpcode() == Instruction::Sub &&
TI->getOpcode() == Instruction::Add) ||
(FI->getOpcode() == Instruction::FSub &&
TI->getOpcode() == Instruction::FAdd)) {
AddOp = TI;
SubOp = FI;
}
if (AddOp) {
Value *OtherAddOp = nullptr;
if (SubOp->getOperand(0) == AddOp->getOperand(0)) {
OtherAddOp = AddOp->getOperand(1);
} else if (SubOp->getOperand(0) == AddOp->getOperand(1)) {
OtherAddOp = AddOp->getOperand(0);
}
if (OtherAddOp) {
// So at this point we know we have (Y -> OtherAddOp):
// select C, (add X, Y), (sub X, Z)
Value *NegVal; // Compute -Z
if (SI.getType()->isFPOrFPVectorTy()) {
NegVal = Builder.CreateFNeg(SubOp->getOperand(1));
if (Instruction *NegInst = dyn_cast<Instruction>(NegVal)) {
FastMathFlags Flags = AddOp->getFastMathFlags();
Flags &= SubOp->getFastMathFlags();
NegInst->setFastMathFlags(Flags);
}
} else {
NegVal = Builder.CreateNeg(SubOp->getOperand(1));
}
Value *NewTrueOp = OtherAddOp;
Value *NewFalseOp = NegVal;
if (AddOp != TI)
std::swap(NewTrueOp, NewFalseOp);
Value *NewSel = Builder.CreateSelect(CondVal, NewTrueOp, NewFalseOp,
SI.getName() + ".p", &SI);
if (SI.getType()->isFPOrFPVectorTy()) {
Instruction *RI =
BinaryOperator::CreateFAdd(SubOp->getOperand(0), NewSel);
FastMathFlags Flags = AddOp->getFastMathFlags();
Flags &= SubOp->getFastMathFlags();
RI->setFastMathFlags(Flags);
return RI;
} else
return BinaryOperator::CreateAdd(SubOp->getOperand(0), NewSel);
}
}
return nullptr;
}
Instruction *InstCombiner::foldSelectExtConst(SelectInst &Sel) {
Instruction *ExtInst;
if (!match(Sel.getTrueValue(), m_Instruction(ExtInst)) &&
!match(Sel.getFalseValue(), m_Instruction(ExtInst)))
return nullptr;
auto ExtOpcode = ExtInst->getOpcode();
if (ExtOpcode != Instruction::ZExt && ExtOpcode != Instruction::SExt)
return nullptr;
// TODO: Handle larger types? That requires adjusting FoldOpIntoSelect too.
Value *X = ExtInst->getOperand(0);
Type *SmallType = X->getType();
if (!SmallType->getScalarType()->isIntegerTy(1))
return nullptr;
Constant *C;
if (!match(Sel.getTrueValue(), m_Constant(C)) &&
!match(Sel.getFalseValue(), m_Constant(C)))
return nullptr;
// If the constant is the same after truncation to the smaller type and
// extension to the original type, we can narrow the select.
Value *Cond = Sel.getCondition();
Type *SelType = Sel.getType();
Constant *TruncC = ConstantExpr::getTrunc(C, SmallType);
Constant *ExtC = ConstantExpr::getCast(ExtOpcode, TruncC, SelType);
if (ExtC == C) {
Value *TruncCVal = cast<Value>(TruncC);
if (ExtInst == Sel.getFalseValue())
std::swap(X, TruncCVal);
// select Cond, (ext X), C --> ext(select Cond, X, C')
// select Cond, C, (ext X) --> ext(select Cond, C', X)
Value *NewSel = Builder->CreateSelect(Cond, X, TruncCVal, "narrow", &Sel);
return CastInst::Create(Instruction::CastOps(ExtOpcode), NewSel, SelType);
}
// If one arm of the select is the extend of the condition, replace that arm
// with the extension of the appropriate known bool value.
if (Cond == X) {
if (ExtInst == Sel.getTrueValue()) {
// select X, (sext X), C --> select X, -1, C
// select X, (zext X), C --> select X, 1, C
Constant *One = ConstantInt::getTrue(SmallType);
Constant *AllOnesOrOne = ConstantExpr::getCast(ExtOpcode, One, SelType);
return SelectInst::Create(Cond, AllOnesOrOne, C, "", nullptr, &Sel);
} else {
// select X, C, (sext X) --> select X, C, 0
// select X, C, (zext X) --> select X, C, 0
Constant *Zero = ConstantInt::getNullValue(SelType);
return SelectInst::Create(Cond, C, Zero, "", nullptr, &Sel);
}
}
return nullptr;
}
/// Try to transform a vector select with a constant condition vector into a
/// shuffle for easier combining with other shuffles and insert/extract.
static Instruction *canonicalizeSelectToShuffle(SelectInst &SI) {
Value *CondVal = SI.getCondition();
Constant *CondC;
if (!CondVal->getType()->isVectorTy() || !match(CondVal, m_Constant(CondC)))
return nullptr;
unsigned NumElts = CondVal->getType()->getVectorNumElements();
SmallVector<Constant *, 16> Mask;
Mask.reserve(NumElts);
Type *Int32Ty = Type::getInt32Ty(CondVal->getContext());
for (unsigned i = 0; i != NumElts; ++i) {
Constant *Elt = CondC->getAggregateElement(i);
if (!Elt)
return nullptr;
if (Elt->isOneValue()) {
// If the select condition element is true, choose from the 1st vector.
Mask.push_back(ConstantInt::get(Int32Ty, i));
} else if (Elt->isNullValue()) {
// If the select condition element is false, choose from the 2nd vector.
Mask.push_back(ConstantInt::get(Int32Ty, i + NumElts));
} else if (isa<UndefValue>(Elt)) {
// Undef in a select condition (choose one of the operands) does not mean
// the same thing as undef in a shuffle mask (any value is acceptable), so
// give up.
return nullptr;
} else {
// Bail out on a constant expression.
return nullptr;
}
}
return new ShuffleVectorInst(SI.getTrueValue(), SI.getFalseValue(),
ConstantVector::get(Mask));
}
/// Reuse bitcasted operands between a compare and select:
/// select (cmp (bitcast C), (bitcast D)), (bitcast' C), (bitcast' D) -->
/// bitcast (select (cmp (bitcast C), (bitcast D)), (bitcast C), (bitcast D))
static Instruction *foldSelectCmpBitcasts(SelectInst &Sel,
InstCombiner::BuilderTy &Builder) {
Value *Cond = Sel.getCondition();
Value *TVal = Sel.getTrueValue();
Value *FVal = Sel.getFalseValue();
CmpInst::Predicate Pred;
Value *A, *B;
if (!match(Cond, m_Cmp(Pred, m_Value(A), m_Value(B))))
return nullptr;
// The select condition is a compare instruction. If the select's true/false
// values are already the same as the compare operands, there's nothing to do.
if (TVal == A || TVal == B || FVal == A || FVal == B)
return nullptr;
Value *C, *D;
if (!match(A, m_BitCast(m_Value(C))) || !match(B, m_BitCast(m_Value(D))))
return nullptr;
// select (cmp (bitcast C), (bitcast D)), (bitcast TSrc), (bitcast FSrc)
Value *TSrc, *FSrc;
if (!match(TVal, m_BitCast(m_Value(TSrc))) ||
!match(FVal, m_BitCast(m_Value(FSrc))))
return nullptr;
// If the select true/false values are *different bitcasts* of the same source
// operands, make the select operands the same as the compare operands and
// cast the result. This is the canonical select form for min/max.
Value *NewSel;
if (TSrc == C && FSrc == D) {
// select (cmp (bitcast C), (bitcast D)), (bitcast' C), (bitcast' D) -->
// bitcast (select (cmp A, B), A, B)
NewSel = Builder.CreateSelect(Cond, A, B, "", &Sel);
} else if (TSrc == D && FSrc == C) {
// select (cmp (bitcast C), (bitcast D)), (bitcast' D), (bitcast' C) -->
// bitcast (select (cmp A, B), B, A)
NewSel = Builder.CreateSelect(Cond, B, A, "", &Sel);
} else {
return nullptr;
}
return CastInst::CreateBitOrPointerCast(NewSel, Sel.getType());
}
Instruction *InstCombiner::visitSelectInst(SelectInst &SI) {
Value *CondVal = SI.getCondition();
Value *TrueVal = SI.getTrueValue();
Value *FalseVal = SI.getFalseValue();
Type *SelType = SI.getType();
if (Value *V = SimplifySelectInst(CondVal, TrueVal, FalseVal, SQ))
return replaceInstUsesWith(SI, V);
if (Instruction *I = canonicalizeSelectToShuffle(SI))
return I;
if (SelType->getScalarType()->isIntegerTy(1) &&
TrueVal->getType() == CondVal->getType()) {
if (match(TrueVal, m_One())) {
// Change: A = select B, true, C --> A = or B, C
return BinaryOperator::CreateOr(CondVal, FalseVal);
}
if (match(TrueVal, m_Zero())) {
// Change: A = select B, false, C --> A = and !B, C
Value *NotCond = Builder->CreateNot(CondVal, "not." + CondVal->getName());
return BinaryOperator::CreateAnd(NotCond, FalseVal);
}
if (match(FalseVal, m_Zero())) {
// Change: A = select B, C, false --> A = and B, C
return BinaryOperator::CreateAnd(CondVal, TrueVal);
}
if (match(FalseVal, m_One())) {
// Change: A = select B, C, true --> A = or !B, C
Value *NotCond = Builder->CreateNot(CondVal, "not." + CondVal->getName());
return BinaryOperator::CreateOr(NotCond, TrueVal);
}
// select a, a, b -> a | b
// select a, b, a -> a & b
if (CondVal == TrueVal)
return BinaryOperator::CreateOr(CondVal, FalseVal);
if (CondVal == FalseVal)
return BinaryOperator::CreateAnd(CondVal, TrueVal);
// select a, ~a, b -> (~a) & b
// select a, b, ~a -> (~a) | b
if (match(TrueVal, m_Not(m_Specific(CondVal))))
return BinaryOperator::CreateAnd(TrueVal, FalseVal);
if (match(FalseVal, m_Not(m_Specific(CondVal))))
return BinaryOperator::CreateOr(TrueVal, FalseVal);
}
// Selecting between two integer or vector splat integer constants?
//
// Note that we don't handle a scalar select of vectors:
// select i1 %c, <2 x i8> <1, 1>, <2 x i8> <0, 0>
// because that may need 3 instructions to splat the condition value:
// extend, insertelement, shufflevector.
if (CondVal->getType()->isVectorTy() == SelType->isVectorTy()) {
// select C, 1, 0 -> zext C to int
if (match(TrueVal, m_One()) && match(FalseVal, m_Zero()))
return new ZExtInst(CondVal, SelType);
// select C, -1, 0 -> sext C to int
if (match(TrueVal, m_AllOnes()) && match(FalseVal, m_Zero()))
return new SExtInst(CondVal, SelType);
// select C, 0, 1 -> zext !C to int
if (match(TrueVal, m_Zero()) && match(FalseVal, m_One())) {
Value *NotCond = Builder->CreateNot(CondVal, "not." + CondVal->getName());
return new ZExtInst(NotCond, SelType);
}
// select C, 0, -1 -> sext !C to int
if (match(TrueVal, m_Zero()) && match(FalseVal, m_AllOnes())) {
Value *NotCond = Builder->CreateNot(CondVal, "not." + CondVal->getName());
return new SExtInst(NotCond, SelType);
}
}
if (ConstantInt *TrueValC = dyn_cast<ConstantInt>(TrueVal))
if (ConstantInt *FalseValC = dyn_cast<ConstantInt>(FalseVal))
if (Value *V = foldSelectICmpAnd(SI, TrueValC, FalseValC, Builder))
return replaceInstUsesWith(SI, V);
// See if we are selecting two values based on a comparison of the two values.
if (FCmpInst *FCI = dyn_cast<FCmpInst>(CondVal)) {
if (FCI->getOperand(0) == TrueVal && FCI->getOperand(1) == FalseVal) {
// Transform (X == Y) ? X : Y -> Y
if (FCI->getPredicate() == FCmpInst::FCMP_OEQ) {
// This is not safe in general for floating point:
// consider X== -0, Y== +0.
// It becomes safe if either operand is a nonzero constant.
ConstantFP *CFPt, *CFPf;
if (((CFPt = dyn_cast<ConstantFP>(TrueVal)) &&
!CFPt->getValueAPF().isZero()) ||
((CFPf = dyn_cast<ConstantFP>(FalseVal)) &&
!CFPf->getValueAPF().isZero()))
return replaceInstUsesWith(SI, FalseVal);
}
// Transform (X une Y) ? X : Y -> X
if (FCI->getPredicate() == FCmpInst::FCMP_UNE) {
// This is not safe in general for floating point:
// consider X== -0, Y== +0.
// It becomes safe if either operand is a nonzero constant.
ConstantFP *CFPt, *CFPf;
if (((CFPt = dyn_cast<ConstantFP>(TrueVal)) &&
!CFPt->getValueAPF().isZero()) ||
((CFPf = dyn_cast<ConstantFP>(FalseVal)) &&
!CFPf->getValueAPF().isZero()))
return replaceInstUsesWith(SI, TrueVal);
}
// Canonicalize to use ordered comparisons by swapping the select
// operands.
//
// e.g.
// (X ugt Y) ? X : Y -> (X ole Y) ? Y : X
if (FCI->hasOneUse() && FCmpInst::isUnordered(FCI->getPredicate())) {
FCmpInst::Predicate InvPred = FCI->getInversePredicate();
IRBuilder<>::FastMathFlagGuard FMFG(*Builder);
Builder->setFastMathFlags(FCI->getFastMathFlags());
Value *NewCond = Builder->CreateFCmp(InvPred, TrueVal, FalseVal,
FCI->getName() + ".inv");
return SelectInst::Create(NewCond, FalseVal, TrueVal,
SI.getName() + ".p");
}
// NOTE: if we wanted to, this is where to detect MIN/MAX
} else if (FCI->getOperand(0) == FalseVal && FCI->getOperand(1) == TrueVal){
// Transform (X == Y) ? Y : X -> X
if (FCI->getPredicate() == FCmpInst::FCMP_OEQ) {
// This is not safe in general for floating point:
// consider X== -0, Y== +0.
// It becomes safe if either operand is a nonzero constant.
ConstantFP *CFPt, *CFPf;
if (((CFPt = dyn_cast<ConstantFP>(TrueVal)) &&
!CFPt->getValueAPF().isZero()) ||
((CFPf = dyn_cast<ConstantFP>(FalseVal)) &&
!CFPf->getValueAPF().isZero()))
return replaceInstUsesWith(SI, FalseVal);
}
// Transform (X une Y) ? Y : X -> Y
if (FCI->getPredicate() == FCmpInst::FCMP_UNE) {
// This is not safe in general for floating point:
// consider X== -0, Y== +0.
// It becomes safe if either operand is a nonzero constant.
ConstantFP *CFPt, *CFPf;
if (((CFPt = dyn_cast<ConstantFP>(TrueVal)) &&
!CFPt->getValueAPF().isZero()) ||
((CFPf = dyn_cast<ConstantFP>(FalseVal)) &&
!CFPf->getValueAPF().isZero()))
return replaceInstUsesWith(SI, TrueVal);
}
// Canonicalize to use ordered comparisons by swapping the select
// operands.
//
// e.g.
// (X ugt Y) ? X : Y -> (X ole Y) ? X : Y
if (FCI->hasOneUse() && FCmpInst::isUnordered(FCI->getPredicate())) {
FCmpInst::Predicate InvPred = FCI->getInversePredicate();
IRBuilder<>::FastMathFlagGuard FMFG(*Builder);
Builder->setFastMathFlags(FCI->getFastMathFlags());
Value *NewCond = Builder->CreateFCmp(InvPred, FalseVal, TrueVal,
FCI->getName() + ".inv");
return SelectInst::Create(NewCond, FalseVal, TrueVal,
SI.getName() + ".p");
}
// NOTE: if we wanted to, this is where to detect MIN/MAX
}
// NOTE: if we wanted to, this is where to detect ABS
}
// See if we are selecting two values based on a comparison of the two values.
if (ICmpInst *ICI = dyn_cast<ICmpInst>(CondVal))
if (Instruction *Result = foldSelectInstWithICmp(SI, ICI))
return Result;
if (Instruction *Add = foldAddSubSelect(SI, *Builder))
return Add;
// Turn (select C, (op X, Y), (op X, Z)) -> (op X, (select C, Y, Z))
auto *TI = dyn_cast<Instruction>(TrueVal);
auto *FI = dyn_cast<Instruction>(FalseVal);
if (TI && FI && TI->getOpcode() == FI->getOpcode())
if (Instruction *IV = foldSelectOpOp(SI, TI, FI))
return IV;
if (Instruction *I = foldSelectExtConst(SI))
return I;
// See if we can fold the select into one of our operands.
if (SelType->isIntOrIntVectorTy() || SelType->isFPOrFPVectorTy()) {
if (Instruction *FoldI = foldSelectIntoOp(SI, TrueVal, FalseVal))
return FoldI;
Value *LHS, *RHS, *LHS2, *RHS2;
Instruction::CastOps CastOp;
SelectPatternResult SPR = matchSelectPattern(&SI, LHS, RHS, &CastOp);
auto SPF = SPR.Flavor;
if (SelectPatternResult::isMinOrMax(SPF)) {
// Canonicalize so that type casts are outside select patterns.
if (LHS->getType()->getPrimitiveSizeInBits() !=
SelType->getPrimitiveSizeInBits()) {
CmpInst::Predicate Pred = getCmpPredicateForMinMax(SPF, SPR.Ordered);
Value *Cmp;
if (CmpInst::isIntPredicate(Pred)) {
Cmp = Builder->CreateICmp(Pred, LHS, RHS);
} else {
IRBuilder<>::FastMathFlagGuard FMFG(*Builder);
auto FMF = cast<FPMathOperator>(SI.getCondition())->getFastMathFlags();
Builder->setFastMathFlags(FMF);
Cmp = Builder->CreateFCmp(Pred, LHS, RHS);
}
Value *NewSI = Builder->CreateCast(
CastOp, Builder->CreateSelect(Cmp, LHS, RHS, SI.getName(), &SI),
SelType);
return replaceInstUsesWith(SI, NewSI);
}
}
if (SPF) {
// MAX(MAX(a, b), a) -> MAX(a, b)
// MIN(MIN(a, b), a) -> MIN(a, b)
// MAX(MIN(a, b), a) -> a
// MIN(MAX(a, b), a) -> a
// ABS(ABS(a)) -> ABS(a)
// NABS(NABS(a)) -> NABS(a)
if (SelectPatternFlavor SPF2 = matchSelectPattern(LHS, LHS2, RHS2).Flavor)
if (Instruction *R = foldSPFofSPF(cast<Instruction>(LHS),SPF2,LHS2,RHS2,
SI, SPF, RHS))
return R;
if (SelectPatternFlavor SPF2 = matchSelectPattern(RHS, LHS2, RHS2).Flavor)
if (Instruction *R = foldSPFofSPF(cast<Instruction>(RHS),SPF2,LHS2,RHS2,
SI, SPF, LHS))
return R;
}
// MAX(~a, ~b) -> ~MIN(a, b)
if ((SPF == SPF_SMAX || SPF == SPF_UMAX) &&
IsFreeToInvert(LHS, LHS->hasNUses(2)) &&
IsFreeToInvert(RHS, RHS->hasNUses(2))) {
// For this transform to be profitable, we need to eliminate at least two
// 'not' instructions if we're going to add one 'not' instruction.
int NumberOfNots =
(LHS->hasNUses(2) && match(LHS, m_Not(m_Value()))) +
(RHS->hasNUses(2) && match(RHS, m_Not(m_Value()))) +
(SI.hasOneUse() && match(*SI.user_begin(), m_Not(m_Value())));
if (NumberOfNots >= 2) {
Value *NewLHS = Builder->CreateNot(LHS);
Value *NewRHS = Builder->CreateNot(RHS);
Value *NewCmp = SPF == SPF_SMAX
? Builder->CreateICmpSLT(NewLHS, NewRHS)
: Builder->CreateICmpULT(NewLHS, NewRHS);
Value *NewSI =
Builder->CreateNot(Builder->CreateSelect(NewCmp, NewLHS, NewRHS));
return replaceInstUsesWith(SI, NewSI);
}
}
// TODO.
// ABS(-X) -> ABS(X)
}
// See if we can fold the select into a phi node if the condition is a select.
if (auto *PN = dyn_cast<PHINode>(SI.getCondition()))
// The true/false values have to be live in the PHI predecessor's blocks.
if (canSelectOperandBeMappingIntoPredBlock(TrueVal, SI) &&
canSelectOperandBeMappingIntoPredBlock(FalseVal, SI))
if (Instruction *NV = foldOpIntoPhi(SI, PN))
return NV;
if (SelectInst *TrueSI = dyn_cast<SelectInst>(TrueVal)) {
if (TrueSI->getCondition()->getType() == CondVal->getType()) {
// select(C, select(C, a, b), c) -> select(C, a, c)
if (TrueSI->getCondition() == CondVal) {
if (SI.getTrueValue() == TrueSI->getTrueValue())
return nullptr;
SI.setOperand(1, TrueSI->getTrueValue());
return &SI;
}
// select(C0, select(C1, a, b), b) -> select(C0&C1, a, b)
// We choose this as normal form to enable folding on the And and shortening
// paths for the values (this helps GetUnderlyingObjects() for example).
if (TrueSI->getFalseValue() == FalseVal && TrueSI->hasOneUse()) {
Value *And = Builder->CreateAnd(CondVal, TrueSI->getCondition());
SI.setOperand(0, And);
SI.setOperand(1, TrueSI->getTrueValue());
return &SI;
}
}
}
if (SelectInst *FalseSI = dyn_cast<SelectInst>(FalseVal)) {
if (FalseSI->getCondition()->getType() == CondVal->getType()) {
// select(C, a, select(C, b, c)) -> select(C, a, c)
if (FalseSI->getCondition() == CondVal) {
if (SI.getFalseValue() == FalseSI->getFalseValue())
return nullptr;
SI.setOperand(2, FalseSI->getFalseValue());
return &SI;
}
// select(C0, a, select(C1, a, b)) -> select(C0|C1, a, b)
if (FalseSI->getTrueValue() == TrueVal && FalseSI->hasOneUse()) {
Value *Or = Builder->CreateOr(CondVal, FalseSI->getCondition());
SI.setOperand(0, Or);
SI.setOperand(2, FalseSI->getFalseValue());
return &SI;
}
}
}
if (BinaryOperator::isNot(CondVal)) {
SI.setOperand(0, BinaryOperator::getNotArgument(CondVal));
SI.setOperand(1, FalseVal);
SI.setOperand(2, TrueVal);
return &SI;
}
if (VectorType *VecTy = dyn_cast<VectorType>(SelType)) {
unsigned VWidth = VecTy->getNumElements();
APInt UndefElts(VWidth, 0);
APInt AllOnesEltMask(APInt::getAllOnesValue(VWidth));
if (Value *V = SimplifyDemandedVectorElts(&SI, AllOnesEltMask, UndefElts)) {
if (V != &SI)
return replaceInstUsesWith(SI, V);
return &SI;
}
if (isa<ConstantAggregateZero>(CondVal)) {
return replaceInstUsesWith(SI, FalseVal);
}
}
// See if we can determine the result of this select based on a dominating
// condition.
BasicBlock *Parent = SI.getParent();
if (BasicBlock *Dom = Parent->getSinglePredecessor()) {
auto *PBI = dyn_cast_or_null<BranchInst>(Dom->getTerminator());
if (PBI && PBI->isConditional() &&
PBI->getSuccessor(0) != PBI->getSuccessor(1) &&
(PBI->getSuccessor(0) == Parent || PBI->getSuccessor(1) == Parent)) {
bool CondIsFalse = PBI->getSuccessor(1) == Parent;
Optional<bool> Implication = isImpliedCondition(
PBI->getCondition(), SI.getCondition(), DL, CondIsFalse);
if (Implication) {
Value *V = *Implication ? TrueVal : FalseVal;
return replaceInstUsesWith(SI, V);
}
}
}
// If we can compute the condition, there's no need for a select.
// Like the above fold, we are attempting to reduce compile-time cost by
// putting this fold here with limitations rather than in InstSimplify.
// The motivation for this call into value tracking is to take advantage of
// the assumption cache, so make sure that is populated.
if (!CondVal->getType()->isVectorTy() && !AC.assumptions().empty()) {
KnownBits Known(1);
computeKnownBits(CondVal, Known, 0, &SI);
if (Known.One == 1)
return replaceInstUsesWith(SI, TrueVal);
if (Known.Zero == 1)
return replaceInstUsesWith(SI, FalseVal);
}
if (Instruction *BitCastSel = foldSelectCmpBitcasts(SI, *Builder))
return BitCastSel;
return nullptr;
}