#
#  Octtools 3.0 Makefile
#
#  TimberWolfMC - Macro-Cell place and route program
#
#  Makefile created on Tue Jan 24 16:06:52 PST 1989 by octtools (using 'create-octtools-makefile')
#
#  Copyright (c) 1988, 1989, Regents of the University of California
#
#
# Description of the 'targets':
#
#  all:			create the tags file, run lint, build the tool/package
#  install:		build the tool/package and install all the necessary files
#  uninstall:		remove the files that would be installed with 'make install'
#  debug:		build and install the debug versions of the package
#				(for tools, build the debug versions and leave in the
#				source directories; note: debug versions of tools
#				MUST be built using 'make debug' or 'make debug-*')
#  header:		install the exported header files for the package
#  lint:		run lint
#  clean:		remove the binary, object files, and temporary files
#  require:		echo a list of packages used in the compilation of the tool/package
#  toolrequire:		echo a list of tools used in the running of the tool
#  test:		run a simple test on the tool/package
#  tags:		build the 'tags' file (for 'vi')
#  TAGS:		build the 'TAGS' file (for 'emacs')
#  info:		echo a one-line description of the tool/package
#  print:		print out the man page or doc file for the tool/package
#  dist:		dist the tool/package
#  test-dist:		tell what would be disted in 'make dist' were run
#  depend:		generate the dependency information
#  strip-depend:	remove the dependency information
#
#
# Description of the 'variables':
#
#  BUILD:		name of the program that builds a 'Makefile' from
#				'Makefile.template'
#  CAD:			location of the CAD tools (for installation)
#  CADROOT:		run-time location of the CAD libraries (can have '~')
#  CC:			name of the C-compiler
#  COMPFLAG:		compilation level (usually nothing, -g, -pg, or -O)
#  CP:			name of the program used for installation ('cp' for installing
#				the file each time, 'ln -s' for installing a link)
#  LDFLAGS:		flags used for linking (e.g., -lXMenu -lX -lm)
#  LINTCREATEFLAG:	flag used by 'lint' for creating lint libraries
#				(-C for BSD, ULTRIX 2.2; -o for IBM RT/PC, ULTRIX 3.0)
#  PRINTER:		name of the printer
#  SHELL:		shell used by 'make' (should always be the bourne shell)
#
#
#------------------------------------------------------------------------------

# for HPUX
SHELL	= /bin/sh

CAD	= /net/shambhala/users/octtools-3.0
CADROOT	= ~octtools
UTILS	= /net/shambhala/users/octtools-3.0/utils

LINTCREATEFLAG = -C
COMPFLAG=
CP = cp
BUILD = ${UTILS}/bin/create-octtools-makefile

NAME	= TimberWolfMC

# packages required for this package/tool
REQUIRE	= mm port

# tools required for this tool
TOOLREQUIRE = 

SRCS1 = 23tree.c addpins.c analyze.c bellman.c buster.c changraph.c checkpen.c config1.c config2.c config3.c density.c doborder.c doublecheck.c finalout.c finalpin.c
OBJS1 = 23tree.o addpins.o analyze.o bellman.o buster.o changraph.o checkpen.o config1.o config2.o config3.o density.o doborder.o doublecheck.o finalout.o finalpin.o

SRC	= ${SRCS1} findcheck.c findcost.c findloc.c findnodes.c findside.c fixpenal.c fulllink.c fuloop.c genorient.c gentwf.c ggenorien.c gglobals.c globals.c gmain.c goverlap.c goverlapf.c goverlapx.c gpass2.c grdcell.c grepair.c hash.c hprobes.c initbb.c loadbins.c loadpg.c main.c makebins.c makelink.c makesite.c move.c mshortest.c mt.c neworient.c outbig.c outgeo.c outpin.c output.c outsmall.c parser.c pass2.c perimeter.c placepads.c placepin.c prboard.c prepair.c prestrict.c printgph.c printnets.c procesnet.c readcells.c readgeo.c readgraph.c readnets.c readpar.c readpnode.c rebin.c reduceg.c rglobals.c rmain.c routenet.c savewolf.c scrapnet.c scrappin.c selectpin.c setpwates.c shortpath.c test2loop.c testloop.c twstats.c uaspect.c ufixnet.c ufixpin.c uloop.c unbust.c upin.c upinswap.c usite0.c usite1.c usite2.c usiteo1.c usiteo2.c usoftnet.c usoftpin.c utemp.c vprobes.c watesides.c wirecosts.c wireest.c wireratio.c woverlap.c woverlapf.c woverlapx.c xgraph.c ygraph.c
LSRC	= ${SRCS1} findcheck.c findcost.c findloc.c findnodes.c findside.c fixpenal.c fulllink.c fuloop.c genorient.c gentwf.c ggenorien.c gglobals.c globals.c gmain.c goverlap.c goverlapf.c goverlapx.c gpass2.c grdcell.c grepair.c hash.c hprobes.c initbb.c loadbins.c loadpg.c main.c makebins.c makelink.c makesite.c move.c mshortest.c mt.c neworient.c outbig.c outgeo.c outpin.c output.c outsmall.c parser.c pass2.c perimeter.c placepads.c placepin.c prboard.c prepair.c prestrict.c printgph.c printnets.c procesnet.c readcells.c readgeo.c readgraph.c readnets.c readpar.c readpnode.c rebin.c reduceg.c rglobals.c rmain.c routenet.c savewolf.c scrapnet.c scrappin.c selectpin.c setpwates.c shortpath.c test2loop.c testloop.c twstats.c uaspect.c ufixnet.c ufixpin.c uloop.c unbust.c upin.c upinswap.c usite0.c usite1.c usite2.c usiteo1.c usiteo2.c usoftnet.c usoftpin.c utemp.c vprobes.c watesides.c wirecosts.c wireest.c wireratio.c woverlap.c woverlapf.c woverlapx.c xgraph.c ygraph.c
OBJ	= ${OBJS1} findcheck.o findcost.o findloc.o findnodes.o findside.o fixpenal.o fulllink.o fuloop.o genorient.o gentwf.o ggenorien.o gglobals.o globals.o gmain.o goverlap.o goverlapf.o goverlapx.o gpass2.o grdcell.o grepair.o hash.o hprobes.o initbb.o loadbins.o loadpg.o main.o makebins.o makelink.o makesite.o move.o mshortest.o mt.o neworient.o outbig.o outgeo.o outpin.o output.o outsmall.o parser.o pass2.o perimeter.o placepads.o placepin.o prboard.o prepair.o prestrict.o printgph.o printnets.o procesnet.o readcells.o readgeo.o readgraph.o readnets.o readpar.o readpnode.o rebin.o reduceg.o rglobals.o rmain.o routenet.o savewolf.o scrapnet.o scrappin.o selectpin.o setpwates.o shortpath.o test2loop.o testloop.o twstats.o uaspect.o ufixnet.o ufixpin.o uloop.o unbust.o upin.o upinswap.o usite0.o usite1.o usite2.o usiteo1.o usiteo2.o usoftnet.o usoftpin.o utemp.o vprobes.o watesides.o wirecosts.o wireest.o wireratio.o woverlap.o woverlapf.o woverlapx.o xgraph.o ygraph.o
HDR	= 23tree.h custom.h geo.h kenk.h lists.h mt.h route.h

TOOLINSTALL= ${CAD}/bin/${TARGET} ${CAD}/man/man1/${MAN}
INSTALL	= ${PKGINSTALL} ${TOOLINSTALL} 

DISTDEST= ${CAD}/src/${NAME}
DISTHOST= octtools@shambhala
MISC	= Makefile Makefile.template 

LIBS	= $(CAD)/lib/libmm$(COMPFLAG).a $(CAD)/lib/liberrtrap$(COMPFLAG).a $(CAD)/lib/libuprintf$(COMPFLAG).a $(CAD)/lib/libport$(COMPFLAG).a
LINTLIBS= $(CAD)/lib/llib-lmm.ln $(CAD)/lib/llib-lport.ln

TARGET	= ${NAME}
TARGETG	= ${NAME}-g
TARGETPG	= ${NAME}-pg
MAN	= ${NAME}.1

PRINTER	= lps40
MACROS	= -man.4.3
PRINT	= enscript
TROFF	= ptroff
TBL	= tbl

MAKEVARS =	\
		"CAD=${CAD}" \
		"CADROOT=${CADROOT}" \
		"CC=${CC}" \
		"CP=${CP}" \
		"COMPFLAG=${COMPFLAG}" \
		"LINTCREATEFLAG=${LINTCREATEFLAG}" \
		"MAKE=$(MAKE)" \
		"MACROS=${MACROS}" \
		"P=${P}" \
		"PRINT=${PRINT}" \
		"PRINTER=${PRINTER}" \
		"TBL=${TBL}" \
		"TROFF=${TROFF}" \
		"UTILS=${UTILS}" \
		"VPATH=${VPATH}"

INCLUDE	= -I${CAD}/include 
CFLAGS	= ${COMPFLAG} ${INCLUDE} '-DCADROOT="${CADROOT}"'
VERSION	= "-DCUR_DATE=\"`date | awk '{print $$2, $$3, $$6}'`\"" \
	  "-DCUR_TIME=\"`date | awk '{print $$4}'`\""
LINTFLAGS= ${INCLUDE} '-DCADROOT="${CADROOT}"'
LDFLAGS	= -lm

#-----------------------------------------------------------------------

all: ${SRC}
	indep-frend -I. -I../include ${SRC} -lmm -lerrtrap -luprintf -lport ${LDFLAGS} ; rm database


#all: tags lint ${TARGET}

#build: Makefile.template
#	${BUILD} Makefile.template
build:

install: ${INSTALL}

uninstall:
	rm -f ${INSTALL}

version.o: version.c
	${CC} ${CFLAGS} ${VERSION} -c version.c
	touch version.c

debug: debug-g debug-pg


debug-g:
	rm -f ${OBJ}
	$(MAKE) COMPFLAG=-g ${MFLAGS} ${MAKEVARS} ${TARGETG}

debug-pg:
	rm -f ${OBJ}
	$(MAKE) COMPFLAG=-pg ${MFLAGS} ${MAKEVARS} ${TARGETPG}


${TARGET} ${TARGETG} ${TARGETPG}: ${OBJ} ${LIBS}
	${CC} ${COMPFLAG} -o $@ ${OBJ} ${LIBS} ${LDFLAGS}

header::

${CAD}/bin/${TARGET}: ${TARGET}
	rm -f $@
	${CP} $? $@
	strip $@

${CAD}/man/man1/${MAN}: ${MAN}
	${TBL} < $? > $@

lint: ${LSRC} ${DRVRSRC} ${HDR} ${LINTLIBS}
	lint ${LINTFLAGS} ${LSRC} ${DRVRSRC} ${LINTLIBS} ${LDFLAGS} | tee lint

clean::
	rm -f ${OBJ} ${DRVROBJ} ${TARGET} ${TARGETG} ${TARGETPG} ${DRIVER} tags TAGS ${LIB} ${LIBG} ${LIBPG} ${LINTLIB} lint make.out mktemp

require:
	@echo ${REQUIRE}

toolrequire:
	@echo ${TOOLREQUIRE}

test::
	@test -f ${CAD}/bin/${TARGET}

tags: ${LSRC} ${DRVRSRC} ${HDR}
	ctags ${LSRC} ${DRVRSRC} ${HDR}

TAGS: ${LSRC} ${DRVRSRC} ${HDR}
	etags ${LSRC} ${DRVRSRC} ${HDR}

info:
	@echo '${NAME}:  Macro-Cell place and route program'

print: ${DOC} ${MAN}
	${TBL} < ${MAN} | ${TROFF} -P${PRINTER} ${MACROS}

dist: ${SRC} ${DRVRSRC} ${HDR} ${DOC} ${MAN}
	rdist -Rich ${SRC} ${DRVRSRC} ${HDR} ${DOC} ${MAN} ${MISC} ${DISTHOST}:${DISTDEST}

test-dist: ${SRC} ${DRVRSRC} ${HDR} ${DOC} ${MAN}
	rdist -Richv ${SRC} ${DRVRSRC} ${HDR} ${DOC} ${MAN} ${MISC} ${DISTHOST}:${DISTDEST}

depend: ${SRC} ${DRVRSRC} ${HDR}
	@rm -f mktemp
	@sed '/^#--DO NOT CHANGE ANYTHING AFTER THIS LINE/,$$d' Makefile > mktemp
	@echo '#--DO NOT CHANGE ANYTHING AFTER THIS LINE' >> mktemp
	@${UTILS}/bin/cc-M ${INCLUDE} ${SRC} ${DRVRSRC} | sed 's|${CAD}|$${CAD}|g' >>mktemp
	@mv mktemp Makefile

strip-depend:
	@rm -f mktemp
	@sed '/^#--DO NOT CHANGE ANYTHING AFTER THIS LINE/,$$d' Makefile > mktemp
	@mv mktemp Makefile

#--EXTRA TARGETS