/*
 * Copyright (C)2009-2015, 2017 D. R. Commander.  All Rights Reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright notice,
 *   this list of conditions and the following disclaimer in the documentation
 *   and/or other materials provided with the distribution.
 * - Neither the name of the libjpeg-turbo Project nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS",
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef __TURBOJPEG_H__
#define __TURBOJPEG_H__

#if defined(_WIN32) && defined(DLLDEFINE)
#define DLLEXPORT __declspec(dllexport)
#else
#define DLLEXPORT
#endif
#define DLLCALL


/**
 * @addtogroup TurboJPEG
 * TurboJPEG API.  This API provides an interface for generating, decoding, and
 * transforming planar YUV and JPEG images in memory.
 *
 * @anchor YUVnotes
 * YUV Image Format Notes
 * ----------------------
 * Technically, the JPEG format uses the YCbCr colorspace (which is technically
 * not a colorspace but a color transform), but per the convention of the
 * digital video community, the TurboJPEG API uses "YUV" to refer to an image
 * format consisting of Y, Cb, and Cr image planes.
 *
 * Each plane is simply a 2D array of bytes, each byte representing the value
 * of one of the components (Y, Cb, or Cr) at a particular location in the
 * image.  The width and height of each plane are determined by the image
 * width, height, and level of chrominance subsampling.   The luminance plane
 * width is the image width padded to the nearest multiple of the horizontal
 * subsampling factor (2 in the case of 4:2:0 and 4:2:2, 4 in the case of
 * 4:1:1, 1 in the case of 4:4:4 or grayscale.)  Similarly, the luminance plane
 * height is the image height padded to the nearest multiple of the vertical
 * subsampling factor (2 in the case of 4:2:0 or 4:4:0, 1 in the case of 4:4:4
 * or grayscale.)  This is irrespective of any additional padding that may be
 * specified as an argument to the various YUV functions.  The chrominance
 * plane width is equal to the luminance plane width divided by the horizontal
 * subsampling factor, and the chrominance plane height is equal to the
 * luminance plane height divided by the vertical subsampling factor.
 *
 * For example, if the source image is 35 x 35 pixels and 4:2:2 subsampling is
 * used, then the luminance plane would be 36 x 35 bytes, and each of the
 * chrominance planes would be 18 x 35 bytes.  If you specify a line padding of
 * 4 bytes on top of this, then the luminance plane would be 36 x 35 bytes, and
 * each of the chrominance planes would be 20 x 35 bytes.
 *
 * @{
 */


/**
 * The number of chrominance subsampling options
 */
#define TJ_NUMSAMP 6

/**
 * Chrominance subsampling options.
 * When pixels are converted from RGB to YCbCr (see #TJCS_YCbCr) or from CMYK
 * to YCCK (see #TJCS_YCCK) as part of the JPEG compression process, some of
 * the Cb and Cr (chrominance) components can be discarded or averaged together
 * to produce a smaller image with little perceptible loss of image clarity
 * (the human eye is more sensitive to small changes in brightness than to
 * small changes in color.)  This is called "chrominance subsampling".
 */
enum TJSAMP
{
  /**
   * 4:4:4 chrominance subsampling (no chrominance subsampling).  The JPEG or
   * YUV image will contain one chrominance component for every pixel in the
   * source image.
   */
  TJSAMP_444=0,
  /**
   * 4:2:2 chrominance subsampling.  The JPEG or YUV image will contain one
   * chrominance component for every 2x1 block of pixels in the source image.
   */
  TJSAMP_422,
  /**
   * 4:2:0 chrominance subsampling.  The JPEG or YUV image will contain one
   * chrominance component for every 2x2 block of pixels in the source image.
   */
  TJSAMP_420,
  /**
   * Grayscale.  The JPEG or YUV image will contain no chrominance components.
   */
  TJSAMP_GRAY,
  /**
   * 4:4:0 chrominance subsampling.  The JPEG or YUV image will contain one
   * chrominance component for every 1x2 block of pixels in the source image.
   *
   * @note 4:4:0 subsampling is not fully accelerated in libjpeg-turbo.
   */
  TJSAMP_440,
  /**
   * 4:1:1 chrominance subsampling.  The JPEG or YUV image will contain one
   * chrominance component for every 4x1 block of pixels in the source image.
   * JPEG images compressed with 4:1:1 subsampling will be almost exactly the
   * same size as those compressed with 4:2:0 subsampling, and in the
   * aggregate, both subsampling methods produce approximately the same
   * perceptual quality.  However, 4:1:1 is better able to reproduce sharp
   * horizontal features.
   *
   * @note 4:1:1 subsampling is not fully accelerated in libjpeg-turbo.
   */
  TJSAMP_411
};

/**
 * MCU block width (in pixels) for a given level of chrominance subsampling.
 * MCU block sizes:
 * - 8x8 for no subsampling or grayscale
 * - 16x8 for 4:2:2
 * - 8x16 for 4:4:0
 * - 16x16 for 4:2:0
 * - 32x8 for 4:1:1
 */
static const int tjMCUWidth[TJ_NUMSAMP]  = {8, 16, 16, 8, 8, 32};

/**
 * MCU block height (in pixels) for a given level of chrominance subsampling.
 * MCU block sizes:
 * - 8x8 for no subsampling or grayscale
 * - 16x8 for 4:2:2
 * - 8x16 for 4:4:0
 * - 16x16 for 4:2:0
 * - 32x8 for 4:1:1
 */
static const int tjMCUHeight[TJ_NUMSAMP] = {8, 8, 16, 8, 16, 8};


/**
 * The number of pixel formats
 */
#define TJ_NUMPF 12

/**
 * Pixel formats
 */
enum TJPF
{
  /**
   * RGB pixel format.  The red, green, and blue components in the image are
   * stored in 3-byte pixels in the order R, G, B from lowest to highest byte
   * address within each pixel.
   */
  TJPF_RGB=0,
  /**
   * BGR pixel format.  The red, green, and blue components in the image are
   * stored in 3-byte pixels in the order B, G, R from lowest to highest byte
   * address within each pixel.
   */
  TJPF_BGR,
  /**
   * RGBX pixel format.  The red, green, and blue components in the image are
   * stored in 4-byte pixels in the order R, G, B from lowest to highest byte
   * address within each pixel.  The X component is ignored when compressing
   * and undefined when decompressing.
   */
  TJPF_RGBX,
  /**
   * BGRX pixel format.  The red, green, and blue components in the image are
   * stored in 4-byte pixels in the order B, G, R from lowest to highest byte
   * address within each pixel.  The X component is ignored when compressing
   * and undefined when decompressing.
   */
  TJPF_BGRX,
  /**
   * XBGR pixel format.  The red, green, and blue components in the image are
   * stored in 4-byte pixels in the order R, G, B from highest to lowest byte
   * address within each pixel.  The X component is ignored when compressing
   * and undefined when decompressing.
   */
  TJPF_XBGR,
  /**
   * XRGB pixel format.  The red, green, and blue components in the image are
   * stored in 4-byte pixels in the order B, G, R from highest to lowest byte
   * address within each pixel.  The X component is ignored when compressing
   * and undefined when decompressing.
   */
  TJPF_XRGB,
  /**
   * Grayscale pixel format.  Each 1-byte pixel represents a luminance
   * (brightness) level from 0 to 255.
   */
  TJPF_GRAY,
  /**
   * RGBA pixel format.  This is the same as @ref TJPF_RGBX, except that when
   * decompressing, the X component is guaranteed to be 0xFF, which can be
   * interpreted as an opaque alpha channel.
   */
  TJPF_RGBA,
  /**
   * BGRA pixel format.  This is the same as @ref TJPF_BGRX, except that when
   * decompressing, the X component is guaranteed to be 0xFF, which can be
   * interpreted as an opaque alpha channel.
   */
  TJPF_BGRA,
  /**
   * ABGR pixel format.  This is the same as @ref TJPF_XBGR, except that when
   * decompressing, the X component is guaranteed to be 0xFF, which can be
   * interpreted as an opaque alpha channel.
   */
  TJPF_ABGR,
  /**
   * ARGB pixel format.  This is the same as @ref TJPF_XRGB, except that when
   * decompressing, the X component is guaranteed to be 0xFF, which can be
   * interpreted as an opaque alpha channel.
   */
  TJPF_ARGB,
  /**
   * CMYK pixel format.  Unlike RGB, which is an additive color model used
   * primarily for display, CMYK (Cyan/Magenta/Yellow/Key) is a subtractive
   * color model used primarily for printing.  In the CMYK color model, the
   * value of each color component typically corresponds to an amount of cyan,
   * magenta, yellow, or black ink that is applied to a white background.  In
   * order to convert between CMYK and RGB, it is necessary to use a color
   * management system (CMS.)  A CMS will attempt to map colors within the
   * printer's gamut to perceptually similar colors in the display's gamut and
   * vice versa, but the mapping is typically not 1:1 or reversible, nor can it
   * be defined with a simple formula.  Thus, such a conversion is out of scope
   * for a codec library.  However, the TurboJPEG API allows for compressing
   * CMYK pixels into a YCCK JPEG image (see #TJCS_YCCK) and decompressing YCCK
   * JPEG images into CMYK pixels.
   */
  TJPF_CMYK
};


/**
 * Red offset (in bytes) for a given pixel format.  This specifies the number
 * of bytes that the red component is offset from the start of the pixel.  For
 * instance, if a pixel of format TJ_BGRX is stored in <tt>char pixel[]</tt>,
 * then the red component will be <tt>pixel[tjRedOffset[TJ_BGRX]]</tt>.
 */
static const int tjRedOffset[TJ_NUMPF] = {0, 2, 0, 2, 3, 1, 0, 0, 2, 3, 1, -1};
/**
 * Green offset (in bytes) for a given pixel format.  This specifies the number
 * of bytes that the green component is offset from the start of the pixel.
 * For instance, if a pixel of format TJ_BGRX is stored in
 * <tt>char pixel[]</tt>, then the green component will be
 * <tt>pixel[tjGreenOffset[TJ_BGRX]]</tt>.
 */
static const int tjGreenOffset[TJ_NUMPF] = {1, 1, 1, 1, 2, 2, 0, 1, 1, 2, 2, -1};
/**
 * Blue offset (in bytes) for a given pixel format.  This specifies the number
 * of bytes that the Blue component is offset from the start of the pixel.  For
 * instance, if a pixel of format TJ_BGRX is stored in <tt>char pixel[]</tt>,
 * then the blue component will be <tt>pixel[tjBlueOffset[TJ_BGRX]]</tt>.
 */
static const int tjBlueOffset[TJ_NUMPF] = {2, 0, 2, 0, 1, 3, 0, 2, 0, 1, 3, -1};
/**
 * Pixel size (in bytes) for a given pixel format.
 */
static const int tjPixelSize[TJ_NUMPF] = {3, 3, 4, 4, 4, 4, 1, 4, 4, 4, 4, 4};


/**
 * The number of JPEG colorspaces
 */
#define TJ_NUMCS 5

/**
 * JPEG colorspaces
 */
enum TJCS
{
  /**
   * RGB colorspace.  When compressing the JPEG image, the R, G, and B
   * components in the source image are reordered into image planes, but no
   * colorspace conversion or subsampling is performed.  RGB JPEG images can be
   * decompressed to any of the extended RGB pixel formats or grayscale, but
   * they cannot be decompressed to YUV images.
   */
  TJCS_RGB=0,
  /**
   * YCbCr colorspace.  YCbCr is not an absolute colorspace but rather a
   * mathematical transformation of RGB designed solely for storage and
   * transmission.  YCbCr images must be converted to RGB before they can
   * actually be displayed.  In the YCbCr colorspace, the Y (luminance)
   * component represents the black & white portion of the original image, and
   * the Cb and Cr (chrominance) components represent the color portion of the
   * original image.  Originally, the analog equivalent of this transformation
   * allowed the same signal to drive both black & white and color televisions,
   * but JPEG images use YCbCr primarily because it allows the color data to be
   * optionally subsampled for the purposes of reducing bandwidth or disk
   * space.  YCbCr is the most common JPEG colorspace, and YCbCr JPEG images
   * can be compressed from and decompressed to any of the extended RGB pixel
   * formats or grayscale, or they can be decompressed to YUV planar images.
   */
  TJCS_YCbCr,
  /**
   * Grayscale colorspace.  The JPEG image retains only the luminance data (Y
   * component), and any color data from the source image is discarded.
   * Grayscale JPEG images can be compressed from and decompressed to any of
   * the extended RGB pixel formats or grayscale, or they can be decompressed
   * to YUV planar images.
   */
  TJCS_GRAY,
  /**
   * CMYK colorspace.  When compressing the JPEG image, the C, M, Y, and K
   * components in the source image are reordered into image planes, but no
   * colorspace conversion or subsampling is performed.  CMYK JPEG images can
   * only be decompressed to CMYK pixels.
   */
  TJCS_CMYK,
  /**
   * YCCK colorspace.  YCCK (AKA "YCbCrK") is not an absolute colorspace but
   * rather a mathematical transformation of CMYK designed solely for storage
   * and transmission.  It is to CMYK as YCbCr is to RGB.  CMYK pixels can be
   * reversibly transformed into YCCK, and as with YCbCr, the chrominance
   * components in the YCCK pixels can be subsampled without incurring major
   * perceptual loss.  YCCK JPEG images can only be compressed from and
   * decompressed to CMYK pixels.
   */
  TJCS_YCCK
};


/**
 * The uncompressed source/destination image is stored in bottom-up (Windows,
 * OpenGL) order, not top-down (X11) order.
 */
#define TJFLAG_BOTTOMUP      2
/**
 * When decompressing an image that was compressed using chrominance
 * subsampling, use the fastest chrominance upsampling algorithm available in
 * the underlying codec.  The default is to use smooth upsampling, which
 * creates a smooth transition between neighboring chrominance components in
 * order to reduce upsampling artifacts in the decompressed image.
 */
#define TJFLAG_FASTUPSAMPLE  256
/**
 * Disable buffer (re)allocation.  If passed to one of the JPEG compression or
 * transform functions, this flag will cause those functions to generate an
 * error if the JPEG image buffer is invalid or too small rather than
 * attempting to allocate or reallocate that buffer.  This reproduces the
 * behavior of earlier versions of TurboJPEG.
 */
#define TJFLAG_NOREALLOC     1024
/**
 * Use the fastest DCT/IDCT algorithm available in the underlying codec.  The
 * default if this flag is not specified is implementation-specific.  For
 * example, the implementation of TurboJPEG for libjpeg[-turbo] uses the fast
 * algorithm by default when compressing, because this has been shown to have
 * only a very slight effect on accuracy, but it uses the accurate algorithm
 * when decompressing, because this has been shown to have a larger effect.
 */
#define TJFLAG_FASTDCT       2048
/**
 * Use the most accurate DCT/IDCT algorithm available in the underlying codec.
 * The default if this flag is not specified is implementation-specific.  For
 * example, the implementation of TurboJPEG for libjpeg[-turbo] uses the fast
 * algorithm by default when compressing, because this has been shown to have
 * only a very slight effect on accuracy, but it uses the accurate algorithm
 * when decompressing, because this has been shown to have a larger effect.
 */
#define TJFLAG_ACCURATEDCT   4096


/**
 * The number of transform operations
 */
#define TJ_NUMXOP 8

/**
 * Transform operations for #tjTransform()
 */
enum TJXOP
{
  /**
   * Do not transform the position of the image pixels
   */
  TJXOP_NONE=0,
  /**
   * Flip (mirror) image horizontally.  This transform is imperfect if there
   * are any partial MCU blocks on the right edge (see #TJXOPT_PERFECT.)
   */
  TJXOP_HFLIP,
  /**
   * Flip (mirror) image vertically.  This transform is imperfect if there are
   * any partial MCU blocks on the bottom edge (see #TJXOPT_PERFECT.)
   */
  TJXOP_VFLIP,
  /**
   * Transpose image (flip/mirror along upper left to lower right axis.)  This
   * transform is always perfect.
   */
  TJXOP_TRANSPOSE,
  /**
   * Transverse transpose image (flip/mirror along upper right to lower left
   * axis.)  This transform is imperfect if there are any partial MCU blocks in
   * the image (see #TJXOPT_PERFECT.)
   */
  TJXOP_TRANSVERSE,
  /**
   * Rotate image clockwise by 90 degrees.  This transform is imperfect if
   * there are any partial MCU blocks on the bottom edge (see
   * #TJXOPT_PERFECT.)
   */
  TJXOP_ROT90,
  /**
   * Rotate image 180 degrees.  This transform is imperfect if there are any
   * partial MCU blocks in the image (see #TJXOPT_PERFECT.)
   */
  TJXOP_ROT180,
  /**
   * Rotate image counter-clockwise by 90 degrees.  This transform is imperfect
   * if there are any partial MCU blocks on the right edge (see
   * #TJXOPT_PERFECT.)
   */
  TJXOP_ROT270
};


/**
 * This option will cause #tjTransform() to return an error if the transform is
 * not perfect.  Lossless transforms operate on MCU blocks, whose size depends
 * on the level of chrominance subsampling used (see #tjMCUWidth
 * and #tjMCUHeight.)  If the image's width or height is not evenly divisible
 * by the MCU block size, then there will be partial MCU blocks on the right
 * and/or bottom edges.  It is not possible to move these partial MCU blocks to
 * the top or left of the image, so any transform that would require that is
 * "imperfect."  If this option is not specified, then any partial MCU blocks
 * that cannot be transformed will be left in place, which will create
 * odd-looking strips on the right or bottom edge of the image.
 */
#define TJXOPT_PERFECT  1
/**
 * This option will cause #tjTransform() to discard any partial MCU blocks that
 * cannot be transformed.
 */
#define TJXOPT_TRIM     2
/**
 * This option will enable lossless cropping.  See #tjTransform() for more
 * information.
 */
#define TJXOPT_CROP     4
/**
 * This option will discard the color data in the input image and produce
 * a grayscale output image.
 */
#define TJXOPT_GRAY     8
/**
 * This option will prevent #tjTransform() from outputting a JPEG image for
 * this particular transform (this can be used in conjunction with a custom
 * filter to capture the transformed DCT coefficients without transcoding
 * them.)
 */
#define TJXOPT_NOOUTPUT 16


/**
 * Scaling factor
 */
typedef struct
{
  /**
   * Numerator
   */
  int num;
  /**
   * Denominator
   */
  int denom;
} tjscalingfactor;

/**
 * Cropping region
 */
typedef struct
{
  /**
   * The left boundary of the cropping region.  This must be evenly divisible
   * by the MCU block width (see #tjMCUWidth.)
   */
  int x;
  /**
   * The upper boundary of the cropping region.  This must be evenly divisible
   * by the MCU block height (see #tjMCUHeight.)
   */
  int y;
  /**
   * The width of the cropping region. Setting this to 0 is the equivalent of
   * setting it to the width of the source JPEG image - x.
   */
  int w;
  /**
   * The height of the cropping region. Setting this to 0 is the equivalent of
   * setting it to the height of the source JPEG image - y.
   */
  int h;
} tjregion;

/**
 * Lossless transform
 */
typedef struct tjtransform
{
  /**
   * Cropping region
   */
  tjregion r;
  /**
   * One of the @ref TJXOP "transform operations"
   */
  int op;
  /**
   * The bitwise OR of one of more of the @ref TJXOPT_CROP "transform options"
   */
  int options;
  /**
   * Arbitrary data that can be accessed within the body of the callback
   * function
   */
  void *data;
  /**
   * A callback function that can be used to modify the DCT coefficients
   * after they are losslessly transformed but before they are transcoded to a
   * new JPEG image.  This allows for custom filters or other transformations
   * to be applied in the frequency domain.
   *
   * @param coeffs pointer to an array of transformed DCT coefficients.  (NOTE:
   * this pointer is not guaranteed to be valid once the callback returns, so
   * applications wishing to hand off the DCT coefficients to another function
   * or library should make a copy of them within the body of the callback.)
   *
   * @param arrayRegion #tjregion structure containing the width and height of
   * the array pointed to by <tt>coeffs</tt> as well as its offset relative to
   * the component plane.  TurboJPEG implementations may choose to split each
   * component plane into multiple DCT coefficient arrays and call the callback
   * function once for each array.
   *
   * @param planeRegion #tjregion structure containing the width and height of
   * the component plane to which <tt>coeffs</tt> belongs
   *
   * @param componentID ID number of the component plane to which
   * <tt>coeffs</tt> belongs (Y, Cb, and Cr have, respectively, ID's of 0, 1,
   * and 2 in typical JPEG images.)
   *
   * @param transformID ID number of the transformed image to which
   * <tt>coeffs</tt> belongs.  This is the same as the index of the transform
   * in the <tt>transforms</tt> array that was passed to #tjTransform().
   *
   * @param transform a pointer to a #tjtransform structure that specifies the
   * parameters and/or cropping region for this transform
   *
   * @return 0 if the callback was successful, or -1 if an error occurred.
   */
  int (*customFilter)(short *coeffs, tjregion arrayRegion,
    tjregion planeRegion, int componentIndex, int transformIndex,
    struct tjtransform *transform);
} tjtransform;

/**
 * TurboJPEG instance handle
 */
typedef void* tjhandle;


/**
 * Pad the given width to the nearest 32-bit boundary
 */
#define TJPAD(width) (((width)+3)&(~3))

/**
 * Compute the scaled value of <tt>dimension</tt> using the given scaling
 * factor.  This macro performs the integer equivalent of <tt>ceil(dimension *
 * scalingFactor)</tt>.
 */
#define TJSCALED(dimension, scalingFactor) ((dimension * scalingFactor.num \
  + scalingFactor.denom - 1) / scalingFactor.denom)


#ifdef __cplusplus
extern "C" {
#endif


/**
 * Create a TurboJPEG compressor instance.
 *
 * @return a handle to the newly-created instance, or NULL if an error
 * occurred (see #tjGetErrorStr().)
 */
DLLEXPORT tjhandle DLLCALL tjInitCompress(void);


/**
 * Compress an RGB, grayscale, or CMYK image into a JPEG image.
 *
 * @param handle a handle to a TurboJPEG compressor or transformer instance
 *
 * @param srcBuf pointer to an image buffer containing RGB, grayscale, or
 * CMYK pixels to be compressed
 *
 * @param width width (in pixels) of the source image
 *
 * @param pitch bytes per line in the source image.  Normally, this should be
 * <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded, or
 * <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of the image
 * is padded to the nearest 32-bit boundary, as is the case for Windows
 * bitmaps.  You can also be clever and use this parameter to skip lines, etc.
 * Setting this parameter to 0 is the equivalent of setting it to
 * <tt>width * #tjPixelSize[pixelFormat]</tt>.
 *
 * @param height height (in pixels) of the source image
 *
 * @param pixelFormat pixel format of the source image (see @ref TJPF
 * "Pixel formats".)
 *
 * @param jpegBuf address of a pointer to an image buffer that will receive the
 * JPEG image.  TurboJPEG has the ability to reallocate the JPEG buffer
 * to accommodate the size of the JPEG image.  Thus, you can choose to:
 * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
 * let TurboJPEG grow the buffer as needed,
 * -# set <tt>*jpegBuf</tt> to NULL to tell TurboJPEG to allocate the buffer
 * for you, or
 * -# pre-allocate the buffer to a "worst case" size determined by calling
 * #tjBufSize().  This should ensure that the buffer never has to be
 * re-allocated (setting #TJFLAG_NOREALLOC guarantees that it won't be.)
 * .
 * If you choose option 1, <tt>*jpegSize</tt> should be set to the size of your
 * pre-allocated buffer.  In any case, unless you have set #TJFLAG_NOREALLOC,
 * you should always check <tt>*jpegBuf</tt> upon return from this function, as
 * it may have changed.
 *
 * @param jpegSize pointer to an unsigned long variable that holds the size of
 * the JPEG image buffer.  If <tt>*jpegBuf</tt> points to a pre-allocated
 * buffer, then <tt>*jpegSize</tt> should be set to the size of the buffer.
 * Upon return, <tt>*jpegSize</tt> will contain the size of the JPEG image (in
 * bytes.)  If <tt>*jpegBuf</tt> points to a JPEG image buffer that is being
 * reused from a previous call to one of the JPEG compression functions, then
 * <tt>*jpegSize</tt> is ignored.
 *
 * @param jpegSubsamp the level of chrominance subsampling to be used when
 * generating the JPEG image (see @ref TJSAMP
 * "Chrominance subsampling options".)
 *
 * @param jpegQual the image quality of the generated JPEG image (1 = worst,
 * 100 = best)
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
*/
DLLEXPORT int DLLCALL tjCompress2(tjhandle handle, const unsigned char *srcBuf,
  int width, int pitch, int height, int pixelFormat, unsigned char **jpegBuf,
  unsigned long *jpegSize, int jpegSubsamp, int jpegQual, int flags);


/**
 * Compress a YUV planar image into a JPEG image.
 *
 * @param handle a handle to a TurboJPEG compressor or transformer instance
 *
 * @param srcBuf pointer to an image buffer containing a YUV planar image to be
 * compressed.  The size of this buffer should match the value returned by
 * #tjBufSizeYUV2() for the given image width, height, padding, and level of
 * chrominance subsampling.  The Y, U (Cb), and V (Cr) image planes should be
 * stored sequentially in the source buffer (refer to @ref YUVnotes
 * "YUV Image Format Notes".)
 *
 * @param width width (in pixels) of the source image.  If the width is not an
 * even multiple of the MCU block width (see #tjMCUWidth), then an intermediate
 * buffer copy will be performed within TurboJPEG.
 *
 * @param pad the line padding used in the source image.  For instance, if each
 * line in each plane of the YUV image is padded to the nearest multiple of 4
 * bytes, then <tt>pad</tt> should be set to 4.
 *
 * @param height height (in pixels) of the source image.  If the height is not
 * an even multiple of the MCU block height (see #tjMCUHeight), then an
 * intermediate buffer copy will be performed within TurboJPEG.
 *
 * @param subsamp the level of chrominance subsampling used in the source
 * image (see @ref TJSAMP "Chrominance subsampling options".)
 *
 * @param jpegBuf address of a pointer to an image buffer that will receive the
 * JPEG image.  TurboJPEG has the ability to reallocate the JPEG buffer to
 * accommodate the size of the JPEG image.  Thus, you can choose to:
 * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
 * let TurboJPEG grow the buffer as needed,
 * -# set <tt>*jpegBuf</tt> to NULL to tell TurboJPEG to allocate the buffer
 * for you, or
 * -# pre-allocate the buffer to a "worst case" size determined by calling
 * #tjBufSize().  This should ensure that the buffer never has to be
 * re-allocated (setting #TJFLAG_NOREALLOC guarantees that it won't be.)
 * .
 * If you choose option 1, <tt>*jpegSize</tt> should be set to the size of your
 * pre-allocated buffer.  In any case, unless you have set #TJFLAG_NOREALLOC,
 * you should always check <tt>*jpegBuf</tt> upon return from this function, as
 * it may have changed.
 *
 * @param jpegSize pointer to an unsigned long variable that holds the size of
 * the JPEG image buffer.  If <tt>*jpegBuf</tt> points to a pre-allocated
 * buffer, then <tt>*jpegSize</tt> should be set to the size of the buffer.
 * Upon return, <tt>*jpegSize</tt> will contain the size of the JPEG image (in
 * bytes.)  If <tt>*jpegBuf</tt> points to a JPEG image buffer that is being
 * reused from a previous call to one of the JPEG compression functions, then
 * <tt>*jpegSize</tt> is ignored.
 *
 * @param jpegQual the image quality of the generated JPEG image (1 = worst,
 * 100 = best)
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
*/
DLLEXPORT int DLLCALL tjCompressFromYUV(tjhandle handle,
  const unsigned char *srcBuf, int width, int pad, int height, int subsamp,
  unsigned char **jpegBuf, unsigned long *jpegSize, int jpegQual, int flags);


/**
 * Compress a set of Y, U (Cb), and V (Cr) image planes into a JPEG image.
 *
 * @param handle a handle to a TurboJPEG compressor or transformer instance
 *
 * @param srcPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
 * (or just a Y plane, if compressing a grayscale image) that contain a YUV
 * image to be compressed.  These planes can be contiguous or non-contiguous in
 * memory.  The size of each plane should match the value returned by
 * #tjPlaneSizeYUV() for the given image width, height, strides, and level of
 * chrominance subsampling.  Refer to @ref YUVnotes "YUV Image Format Notes"
 * for more details.
 *
 * @param width width (in pixels) of the source image.  If the width is not an
 * even multiple of the MCU block width (see #tjMCUWidth), then an intermediate
 * buffer copy will be performed within TurboJPEG.
 *
 * @param strides an array of integers, each specifying the number of bytes per
 * line in the corresponding plane of the YUV source image.  Setting the stride
 * for any plane to 0 is the same as setting it to the plane width (see
 * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
 * the strides for all planes will be set to their respective plane widths.
 * You can adjust the strides in order to specify an arbitrary amount of line
 * padding in each plane or to create a JPEG image from a subregion of a larger
 * YUV planar image.
 *
 * @param height height (in pixels) of the source image.  If the height is not
 * an even multiple of the MCU block height (see #tjMCUHeight), then an
 * intermediate buffer copy will be performed within TurboJPEG.
 *
 * @param subsamp the level of chrominance subsampling used in the source
 * image (see @ref TJSAMP "Chrominance subsampling options".)
 *
 * @param jpegBuf address of a pointer to an image buffer that will receive the
 * JPEG image.  TurboJPEG has the ability to reallocate the JPEG buffer to
 * accommodate the size of the JPEG image.  Thus, you can choose to:
 * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
 * let TurboJPEG grow the buffer as needed,
 * -# set <tt>*jpegBuf</tt> to NULL to tell TurboJPEG to allocate the buffer
 * for you, or
 * -# pre-allocate the buffer to a "worst case" size determined by calling
 * #tjBufSize().  This should ensure that the buffer never has to be
 * re-allocated (setting #TJFLAG_NOREALLOC guarantees that it won't be.)
 * .
 * If you choose option 1, <tt>*jpegSize</tt> should be set to the size of your
 * pre-allocated buffer.  In any case, unless you have set #TJFLAG_NOREALLOC,
 * you should always check <tt>*jpegBuf</tt> upon return from this function, as
 * it may have changed.
 *
 * @param jpegSize pointer to an unsigned long variable that holds the size of
 * the JPEG image buffer.  If <tt>*jpegBuf</tt> points to a pre-allocated
 * buffer, then <tt>*jpegSize</tt> should be set to the size of the buffer.
 * Upon return, <tt>*jpegSize</tt> will contain the size of the JPEG image (in
 * bytes.)  If <tt>*jpegBuf</tt> points to a JPEG image buffer that is being
 * reused from a previous call to one of the JPEG compression functions, then
 * <tt>*jpegSize</tt> is ignored.
 *
 * @param jpegQual the image quality of the generated JPEG image (1 = worst,
 * 100 = best)
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
*/
DLLEXPORT int DLLCALL tjCompressFromYUVPlanes(tjhandle handle,
  const unsigned char **srcPlanes, int width, const int *strides, int height,
  int subsamp, unsigned char **jpegBuf, unsigned long *jpegSize, int jpegQual,
  int flags);


/**
 * The maximum size of the buffer (in bytes) required to hold a JPEG image with
 * the given parameters.  The number of bytes returned by this function is
 * larger than the size of the uncompressed source image.  The reason for this
 * is that the JPEG format uses 16-bit coefficients, and it is thus possible
 * for a very high-quality JPEG image with very high-frequency content to
 * expand rather than compress when converted to the JPEG format.  Such images
 * represent a very rare corner case, but since there is no way to predict the
 * size of a JPEG image prior to compression, the corner case has to be
 * handled.
 *
 * @param width width (in pixels) of the image
 *
 * @param height height (in pixels) of the image
 *
 * @param jpegSubsamp the level of chrominance subsampling to be used when
 * generating the JPEG image (see @ref TJSAMP
 * "Chrominance subsampling options".)
 *
 * @return the maximum size of the buffer (in bytes) required to hold the
 * image, or -1 if the arguments are out of bounds.
 */
DLLEXPORT unsigned long DLLCALL tjBufSize(int width, int height,
  int jpegSubsamp);


/**
 * The size of the buffer (in bytes) required to hold a YUV planar image with
 * the given parameters.
 *
 * @param width width (in pixels) of the image
 *
 * @param pad the width of each line in each plane of the image is padded to
 * the nearest multiple of this number of bytes (must be a power of 2.)
 *
 * @param height height (in pixels) of the image
 *
 * @param subsamp level of chrominance subsampling in the image (see
 * @ref TJSAMP "Chrominance subsampling options".)
 *
 * @return the size of the buffer (in bytes) required to hold the image, or
 * -1 if the arguments are out of bounds.
 */
DLLEXPORT unsigned long DLLCALL tjBufSizeYUV2(int width, int pad, int height,
  int subsamp);


/**
 * The size of the buffer (in bytes) required to hold a YUV image plane with
 * the given parameters.
 *
 * @param componentID ID number of the image plane (0 = Y, 1 = U/Cb, 2 = V/Cr)
 *
 * @param width width (in pixels) of the YUV image.  NOTE: this is the width of
 * the whole image, not the plane width.
 *
 * @param stride bytes per line in the image plane.  Setting this to 0 is the
 * equivalent of setting it to the plane width.
 *
 * @param height height (in pixels) of the YUV image.  NOTE: this is the height
 * of the whole image, not the plane height.
 *
 * @param subsamp level of chrominance subsampling in the image (see
 * @ref TJSAMP "Chrominance subsampling options".)
 *
 * @return the size of the buffer (in bytes) required to hold the YUV image
 * plane, or -1 if the arguments are out of bounds.
 */
DLLEXPORT unsigned long DLLCALL tjPlaneSizeYUV(int componentID, int width,
  int stride, int height, int subsamp);


/**
 * The plane width of a YUV image plane with the given parameters.  Refer to
 * @ref YUVnotes "YUV Image Format Notes" for a description of plane width.
 *
 * @param componentID ID number of the image plane (0 = Y, 1 = U/Cb, 2 = V/Cr)
 *
 * @param width width (in pixels) of the YUV image
 *
 * @param subsamp level of chrominance subsampling in the image (see
 * @ref TJSAMP "Chrominance subsampling options".)
 *
 * @return the plane width of a YUV image plane with the given parameters, or
 * -1 if the arguments are out of bounds.
 */
DLLEXPORT int tjPlaneWidth(int componentID, int width, int subsamp);


/**
 * The plane height of a YUV image plane with the given parameters.  Refer to
 * @ref YUVnotes "YUV Image Format Notes" for a description of plane height.
 *
 * @param componentID ID number of the image plane (0 = Y, 1 = U/Cb, 2 = V/Cr)
 *
 * @param height height (in pixels) of the YUV image
 *
 * @param subsamp level of chrominance subsampling in the image (see
 * @ref TJSAMP "Chrominance subsampling options".)
 *
 * @return the plane height of a YUV image plane with the given parameters, or
 * -1 if the arguments are out of bounds.
 */
DLLEXPORT int tjPlaneHeight(int componentID, int height, int subsamp);


/**
 * Encode an RGB or grayscale image into a YUV planar image.  This function
 * uses the accelerated color conversion routines in the underlying
 * codec but does not execute any of the other steps in the JPEG compression
 * process.
 *
 * @param handle a handle to a TurboJPEG compressor or transformer instance
 *
 * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels
 * to be encoded
 *
 * @param width width (in pixels) of the source image
 *
 * @param pitch bytes per line in the source image.  Normally, this should be
 * <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded, or
 * <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of the image
 * is padded to the nearest 32-bit boundary, as is the case for Windows
 * bitmaps.  You can also be clever and use this parameter to skip lines, etc.
 * Setting this parameter to 0 is the equivalent of setting it to
 * <tt>width * #tjPixelSize[pixelFormat]</tt>.
 *
 * @param height height (in pixels) of the source image
 *
 * @param pixelFormat pixel format of the source image (see @ref TJPF
 * "Pixel formats".)
 *
 * @param dstBuf pointer to an image buffer that will receive the YUV image.
 * Use #tjBufSizeYUV2() to determine the appropriate size for this buffer based
 * on the image width, height, padding, and level of chrominance subsampling.
 * The Y, U (Cb), and V (Cr) image planes will be stored sequentially in the
 * buffer (refer to @ref YUVnotes "YUV Image Format Notes".)
 *
 * @param pad the width of each line in each plane of the YUV image will be
 * padded to the nearest multiple of this number of bytes (must be a power of
 * 2.)  To generate images suitable for X Video, <tt>pad</tt> should be set to
 * 4.
 *
 * @param subsamp the level of chrominance subsampling to be used when
 * generating the YUV image (see @ref TJSAMP
 * "Chrominance subsampling options".)  To generate images suitable for X
 * Video, <tt>subsamp</tt> should be set to @ref TJSAMP_420.  This produces an
 * image compatible with the I420 (AKA "YUV420P") format.
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
*/
DLLEXPORT int DLLCALL tjEncodeYUV3(tjhandle handle,
  const unsigned char *srcBuf, int width, int pitch, int height,
  int pixelFormat, unsigned char *dstBuf, int pad, int subsamp, int flags);


/**
 * Encode an RGB or grayscale image into separate Y, U (Cb), and V (Cr) image
 * planes.  This function uses the accelerated color conversion routines in the
 * underlying codec but does not execute any of the other steps in the JPEG
 * compression process.
 *
 * @param handle a handle to a TurboJPEG compressor or transformer instance
 *
 * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels
 * to be encoded
 *
 * @param width width (in pixels) of the source image
 *
 * @param pitch bytes per line in the source image.  Normally, this should be
 * <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded, or
 * <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of the image
 * is padded to the nearest 32-bit boundary, as is the case for Windows
 * bitmaps.  You can also be clever and use this parameter to skip lines, etc.
 * Setting this parameter to 0 is the equivalent of setting it to
 * <tt>width * #tjPixelSize[pixelFormat]</tt>.
 *
 * @param height height (in pixels) of the source image
 *
 * @param pixelFormat pixel format of the source image (see @ref TJPF
 * "Pixel formats".)
 *
 * @param dstPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
 * (or just a Y plane, if generating a grayscale image) that will receive the
 * encoded image.  These planes can be contiguous or non-contiguous in memory.
 * Use #tjPlaneSizeYUV() to determine the appropriate size for each plane based
 * on the image width, height, strides, and level of chrominance subsampling.
 * Refer to @ref YUVnotes "YUV Image Format Notes" for more details.
 *
 * @param strides an array of integers, each specifying the number of bytes per
 * line in the corresponding plane of the output image.  Setting the stride for
 * any plane to 0 is the same as setting it to the plane width (see
 * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
 * the strides for all planes will be set to their respective plane widths.
 * You can adjust the strides in order to add an arbitrary amount of line
 * padding to each plane or to encode an RGB or grayscale image into a
 * subregion of a larger YUV planar image.
 *
 * @param subsamp the level of chrominance subsampling to be used when
 * generating the YUV image (see @ref TJSAMP
 * "Chrominance subsampling options".)  To generate images suitable for X
 * Video, <tt>subsamp</tt> should be set to @ref TJSAMP_420.  This produces an
 * image compatible with the I420 (AKA "YUV420P") format.
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
*/
DLLEXPORT int DLLCALL tjEncodeYUVPlanes(tjhandle handle,
  const unsigned char *srcBuf, int width, int pitch, int height,
  int pixelFormat, unsigned char **dstPlanes, int *strides, int subsamp,
  int flags);


/**
 * Create a TurboJPEG decompressor instance.
 *
 * @return a handle to the newly-created instance, or NULL if an error
 * occurred (see #tjGetErrorStr().)
*/
DLLEXPORT tjhandle DLLCALL tjInitDecompress(void);


/**
 * Retrieve information about a JPEG image without decompressing it.
 *
 * @param handle a handle to a TurboJPEG decompressor or transformer instance
 *
 * @param jpegBuf pointer to a buffer containing a JPEG image
 *
 * @param jpegSize size of the JPEG image (in bytes)
 *
 * @param width pointer to an integer variable that will receive the width (in
 * pixels) of the JPEG image
 *
 * @param height pointer to an integer variable that will receive the height
 * (in pixels) of the JPEG image
 *
 * @param jpegSubsamp pointer to an integer variable that will receive the
 * level of chrominance subsampling used when the JPEG image was compressed
 * (see @ref TJSAMP "Chrominance subsampling options".)
 *
 * @param jpegColorspace pointer to an integer variable that will receive one
 * of the JPEG colorspace constants, indicating the colorspace of the JPEG
 * image (see @ref TJCS "JPEG colorspaces".)
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
*/
DLLEXPORT int DLLCALL tjDecompressHeader3(tjhandle handle,
  const unsigned char *jpegBuf, unsigned long jpegSize, int *width,
  int *height, int *jpegSubsamp, int *jpegColorspace);


/**
 * Returns a list of fractional scaling factors that the JPEG decompressor in
 * this implementation of TurboJPEG supports.
 *
 * @param numscalingfactors pointer to an integer variable that will receive
 * the number of elements in the list
 *
 * @return a pointer to a list of fractional scaling factors, or NULL if an
 * error is encountered (see #tjGetErrorStr().)
*/
DLLEXPORT tjscalingfactor* DLLCALL tjGetScalingFactors(int *numscalingfactors);


/**
 * Decompress a JPEG image to an RGB, grayscale, or CMYK image.
 *
 * @param handle a handle to a TurboJPEG decompressor or transformer instance
 *
 * @param jpegBuf pointer to a buffer containing the JPEG image to decompress
 *
 * @param jpegSize size of the JPEG image (in bytes)
 *
 * @param dstBuf pointer to an image buffer that will receive the decompressed
 * image.  This buffer should normally be <tt>pitch * scaledHeight</tt> bytes
 * in size, where <tt>scaledHeight</tt> can be determined by calling
 * #TJSCALED() with the JPEG image height and one of the scaling factors
 * returned by #tjGetScalingFactors().  The <tt>dstBuf</tt> pointer may also be
 * used to decompress into a specific region of a larger buffer.
 *
 * @param width desired width (in pixels) of the destination image.  If this is
 * different than the width of the JPEG image being decompressed, then
 * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
 * possible image that will fit within the desired width.  If <tt>width</tt> is
 * set to 0, then only the height will be considered when determining the
 * scaled image size.
 *
 * @param pitch bytes per line in the destination image.  Normally, this is
 * <tt>scaledWidth * #tjPixelSize[pixelFormat]</tt> if the decompressed image
 * is unpadded, else <tt>#TJPAD(scaledWidth * #tjPixelSize[pixelFormat])</tt>
 * if each line of the decompressed image is padded to the nearest 32-bit
 * boundary, as is the case for Windows bitmaps.  (NOTE: <tt>scaledWidth</tt>
 * can be determined by calling #TJSCALED() with the JPEG image width and one
 * of the scaling factors returned by #tjGetScalingFactors().)  You can also be
 * clever and use the pitch parameter to skip lines, etc.  Setting this
 * parameter to 0 is the equivalent of setting it to
 * <tt>scaledWidth * #tjPixelSize[pixelFormat]</tt>.
 *
 * @param height desired height (in pixels) of the destination image.  If this
 * is different than the height of the JPEG image being decompressed, then
 * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
 * possible image that will fit within the desired height.  If <tt>height</tt>
 * is set to 0, then only the width will be considered when determining the
 * scaled image size.
 *
 * @param pixelFormat pixel format of the destination image (see @ref
 * TJPF "Pixel formats".)
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
DLLEXPORT int DLLCALL tjDecompress2(tjhandle handle,
  const unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
  int width, int pitch, int height, int pixelFormat, int flags);


/**
 * Decompress a JPEG image to a YUV planar image.  This function performs JPEG
 * decompression but leaves out the color conversion step, so a planar YUV
 * image is generated instead of an RGB image.
 *
 * @param handle a handle to a TurboJPEG decompressor or transformer instance
 *
 * @param jpegBuf pointer to a buffer containing the JPEG image to decompress
 *
 * @param jpegSize size of the JPEG image (in bytes)
 *
 * @param dstBuf pointer to an image buffer that will receive the YUV image.
 * Use #tjBufSizeYUV2() to determine the appropriate size for this buffer based
 * on the image width, height, padding, and level of subsampling.  The Y,
 * U (Cb), and V (Cr) image planes will be stored sequentially in the buffer
 * (refer to @ref YUVnotes "YUV Image Format Notes".)
 *
 * @param width desired width (in pixels) of the YUV image.  If this is
 * different than the width of the JPEG image being decompressed, then
 * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
 * possible image that will fit within the desired width.  If <tt>width</tt> is
 * set to 0, then only the height will be considered when determining the
 * scaled image size.  If the scaled width is not an even multiple of the MCU
 * block width (see #tjMCUWidth), then an intermediate buffer copy will be
 * performed within TurboJPEG.
 *
 * @param pad the width of each line in each plane of the YUV image will be
 * padded to the nearest multiple of this number of bytes (must be a power of
 * 2.)  To generate images suitable for X Video, <tt>pad</tt> should be set to
 * 4.
 *
 * @param height desired height (in pixels) of the YUV image.  If this is
 * different than the height of the JPEG image being decompressed, then
 * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
 * possible image that will fit within the desired height.  If <tt>height</tt>
 * is set to 0, then only the width will be considered when determining the
 * scaled image size.  If the scaled height is not an even multiple of the MCU
 * block height (see #tjMCUHeight), then an intermediate buffer copy will be
 * performed within TurboJPEG.
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
DLLEXPORT int DLLCALL tjDecompressToYUV2(tjhandle handle,
  const unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
  int width, int pad, int height, int flags);


/**
 * Decompress a JPEG image into separate Y, U (Cb), and V (Cr) image
 * planes.  This function performs JPEG decompression but leaves out the color
 * conversion step, so a planar YUV image is generated instead of an RGB image.
 *
 * @param handle a handle to a TurboJPEG decompressor or transformer instance
 *
 * @param jpegBuf pointer to a buffer containing the JPEG image to decompress
 *
 * @param jpegSize size of the JPEG image (in bytes)
 *
 * @param dstPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
 * (or just a Y plane, if decompressing a grayscale image) that will receive
 * the YUV image.  These planes can be contiguous or non-contiguous in memory.
 * Use #tjPlaneSizeYUV() to determine the appropriate size for each plane based
 * on the scaled image width, scaled image height, strides, and level of
 * chrominance subsampling.  Refer to @ref YUVnotes "YUV Image Format Notes"
 * for more details.
 *
 * @param width desired width (in pixels) of the YUV image.  If this is
 * different than the width of the JPEG image being decompressed, then
 * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
 * possible image that will fit within the desired width.  If <tt>width</tt> is
 * set to 0, then only the height will be considered when determining the
 * scaled image size.  If the scaled width is not an even multiple of the MCU
 * block width (see #tjMCUWidth), then an intermediate buffer copy will be
 * performed within TurboJPEG.
 *
 * @param strides an array of integers, each specifying the number of bytes per
 * line in the corresponding plane of the output image.  Setting the stride for
 * any plane to 0 is the same as setting it to the scaled plane width (see
 * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
 * the strides for all planes will be set to their respective scaled plane
 * widths.  You can adjust the strides in order to add an arbitrary amount of
 * line padding to each plane or to decompress the JPEG image into a subregion
 * of a larger YUV planar image.
 *
 * @param height desired height (in pixels) of the YUV image.  If this is
 * different than the height of the JPEG image being decompressed, then
 * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
 * possible image that will fit within the desired height.  If <tt>height</tt>
 * is set to 0, then only the width will be considered when determining the
 * scaled image size.  If the scaled height is not an even multiple of the MCU
 * block height (see #tjMCUHeight), then an intermediate buffer copy will be
 * performed within TurboJPEG.
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
DLLEXPORT int DLLCALL tjDecompressToYUVPlanes(tjhandle handle,
  const unsigned char *jpegBuf, unsigned long jpegSize,
  unsigned char **dstPlanes, int width, int *strides, int height, int flags);


/**
 * Decode a YUV planar image into an RGB or grayscale image.  This function
 * uses the accelerated color conversion routines in the underlying
 * codec but does not execute any of the other steps in the JPEG decompression
 * process.
 *
 * @param handle a handle to a TurboJPEG decompressor or transformer instance
 *
 * @param srcBuf pointer to an image buffer containing a YUV planar image to be
 * decoded.  The size of this buffer should match the value returned by
 * #tjBufSizeYUV2() for the given image width, height, padding, and level of
 * chrominance subsampling.  The Y, U (Cb), and V (Cr) image planes should be
 * stored sequentially in the source buffer (refer to @ref YUVnotes
 * "YUV Image Format Notes".)
 *
 * @param pad Use this parameter to specify that the width of each line in each
 * plane of the YUV source image is padded to the nearest multiple of this
 * number of bytes (must be a power of 2.)
 *
 * @param subsamp the level of chrominance subsampling used in the YUV source
 * image (see @ref TJSAMP "Chrominance subsampling options".)
 *
 * @param dstBuf pointer to an image buffer that will receive the decoded
 * image.  This buffer should normally be <tt>pitch * height</tt> bytes in
 * size, but the <tt>dstBuf</tt> pointer can also be used to decode into a
 * specific region of a larger buffer.
 *
 * @param width width (in pixels) of the source and destination images
 *
 * @param pitch bytes per line in the destination image.  Normally, this should
 * be <tt>width * #tjPixelSize[pixelFormat]</tt> if the destination image is
 * unpadded, or <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line
 * of the destination image should be padded to the nearest 32-bit boundary, as
 * is the case for Windows bitmaps.  You can also be clever and use the pitch
 * parameter to skip lines, etc.  Setting this parameter to 0 is the equivalent
 * of setting it to <tt>width * #tjPixelSize[pixelFormat]</tt>.
 *
 * @param height height (in pixels) of the source and destination images
 *
 * @param pixelFormat pixel format of the destination image (see @ref TJPF
 * "Pixel formats".)
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
DLLEXPORT int DLLCALL tjDecodeYUV(tjhandle handle, const unsigned char *srcBuf,
  int pad, int subsamp, unsigned char *dstBuf, int width, int pitch,
  int height, int pixelFormat, int flags);


/**
 * Decode a set of Y, U (Cb), and V (Cr) image planes into an RGB or grayscale
 * image.  This function uses the accelerated color conversion routines in the
 * underlying codec but does not execute any of the other steps in the JPEG
 * decompression process.
 *
 * @param handle a handle to a TurboJPEG decompressor or transformer instance
 *
 * @param srcPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
 * (or just a Y plane, if decoding a grayscale image) that contain a YUV image
 * to be decoded.  These planes can be contiguous or non-contiguous in memory.
 * The size of each plane should match the value returned by #tjPlaneSizeYUV()
 * for the given image width, height, strides, and level of chrominance
 * subsampling.  Refer to @ref YUVnotes "YUV Image Format Notes" for more
 * details.
 *
 * @param strides an array of integers, each specifying the number of bytes per
 * line in the corresponding plane of the YUV source image.  Setting the stride
 * for any plane to 0 is the same as setting it to the plane width (see
 * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
 * the strides for all planes will be set to their respective plane widths.
 * You can adjust the strides in order to specify an arbitrary amount of line
 * padding in each plane or to decode a subregion of a larger YUV planar image.
 *
 * @param subsamp the level of chrominance subsampling used in the YUV source
 * image (see @ref TJSAMP "Chrominance subsampling options".)
 *
 * @param dstBuf pointer to an image buffer that will receive the decoded
 * image.  This buffer should normally be <tt>pitch * height</tt> bytes in
 * size, but the <tt>dstBuf</tt> pointer can also be used to decode into a
 * specific region of a larger buffer.
 *
 * @param width width (in pixels) of the source and destination images
 *
 * @param pitch bytes per line in the destination image.  Normally, this should
 * be <tt>width * #tjPixelSize[pixelFormat]</tt> if the destination image is
 * unpadded, or <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line
 * of the destination image should be padded to the nearest 32-bit boundary, as
 * is the case for Windows bitmaps.  You can also be clever and use the pitch
 * parameter to skip lines, etc.  Setting this parameter to 0 is the equivalent
 * of setting it to <tt>width * #tjPixelSize[pixelFormat]</tt>.
 *
 * @param height height (in pixels) of the source and destination images
 *
 * @param pixelFormat pixel format of the destination image (see @ref TJPF
 * "Pixel formats".)
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
DLLEXPORT int DLLCALL tjDecodeYUVPlanes(tjhandle handle,
  const unsigned char **srcPlanes, const int *strides, int subsamp,
  unsigned char *dstBuf, int width, int pitch, int height, int pixelFormat,
  int flags);


/**
 * Create a new TurboJPEG transformer instance.
 *
 * @return a handle to the newly-created instance, or NULL if an error
 * occurred (see #tjGetErrorStr().)
 */
DLLEXPORT tjhandle DLLCALL tjInitTransform(void);


/**
 * Losslessly transform a JPEG image into another JPEG image.  Lossless
 * transforms work by moving the raw DCT coefficients from one JPEG image
 * structure to another without altering the values of the coefficients.  While
 * this is typically faster than decompressing the image, transforming it, and
 * re-compressing it, lossless transforms are not free.  Each lossless
 * transform requires reading and performing Huffman decoding on all of the
 * coefficients in the source image, regardless of the size of the destination
 * image.  Thus, this function provides a means of generating multiple
 * transformed images from the same source or  applying multiple
 * transformations simultaneously, in order to eliminate the need to read the
 * source coefficients multiple times.
 *
 * @param handle a handle to a TurboJPEG transformer instance
 *
 * @param jpegBuf pointer to a buffer containing the JPEG source image to
 * transform
 *
 * @param jpegSize size of the JPEG source image (in bytes)
 *
 * @param n the number of transformed JPEG images to generate
 *
 * @param dstBufs pointer to an array of n image buffers.  <tt>dstBufs[i]</tt>
 * will receive a JPEG image that has been transformed using the parameters in
 * <tt>transforms[i]</tt>.  TurboJPEG has the ability to reallocate the JPEG
 * buffer to accommodate the size of the JPEG image.  Thus, you can choose to:
 * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
 * let TurboJPEG grow the buffer as needed,
 * -# set <tt>dstBufs[i]</tt> to NULL to tell TurboJPEG to allocate the buffer
 * for you, or
 * -# pre-allocate the buffer to a "worst case" size determined by calling
 * #tjBufSize() with the transformed or cropped width and height.  Under normal
 * circumstances, this should ensure that the buffer never has to be
 * re-allocated (setting #TJFLAG_NOREALLOC guarantees that it won't be.)  Note,
 * however, that there are some rare cases (such as transforming images with a
 * large amount of embedded EXIF or ICC profile data) in which the output image
 * will be larger than the worst-case size, and #TJFLAG_NOREALLOC cannot be
 * used in those cases.
 * .
 * If you choose option 1, <tt>dstSizes[i]</tt> should be set to the size of
 * your pre-allocated buffer.  In any case, unless you have set
 * #TJFLAG_NOREALLOC, you should always check <tt>dstBufs[i]</tt> upon return
 * from this function, as it may have changed.
 *
 * @param dstSizes pointer to an array of n unsigned long variables that will
 * receive the actual sizes (in bytes) of each transformed JPEG image.  If
 * <tt>dstBufs[i]</tt> points to a pre-allocated buffer, then
 * <tt>dstSizes[i]</tt> should be set to the size of the buffer.  Upon return,
 * <tt>dstSizes[i]</tt> will contain the size of the JPEG image (in bytes.)
 *
 * @param transforms pointer to an array of n #tjtransform structures, each of
 * which specifies the transform parameters and/or cropping region for the
 * corresponding transformed output image.
 *
 * @param flags the bitwise OR of one or more of the @ref TJFLAG_ACCURATEDCT
 * "flags"
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
DLLEXPORT int DLLCALL tjTransform(tjhandle handle,
  const unsigned char *jpegBuf, unsigned long jpegSize, int n,
  unsigned char **dstBufs, unsigned long *dstSizes, tjtransform *transforms,
  int flags);


/**
 * Destroy a TurboJPEG compressor, decompressor, or transformer instance.
 *
 * @param handle a handle to a TurboJPEG compressor, decompressor or
 * transformer instance
 *
 * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
DLLEXPORT int DLLCALL tjDestroy(tjhandle handle);


/**
 * Allocate an image buffer for use with TurboJPEG.  You should always use
 * this function to allocate the JPEG destination buffer(s) for the compression
 * and transform functions unless you are disabling automatic buffer
 * (re)allocation (by setting #TJFLAG_NOREALLOC.)
 *
 * @param bytes the number of bytes to allocate
 *
 * @return a pointer to a newly-allocated buffer with the specified number of
 * bytes.
 *
 * @sa tjFree()
 */
DLLEXPORT unsigned char* DLLCALL tjAlloc(int bytes);


/**
 * Free an image buffer previously allocated by TurboJPEG.  You should always
 * use this function to free JPEG destination buffer(s) that were automatically
 * (re)allocated by the compression and transform functions or that were
 * manually allocated using #tjAlloc().
 *
 * @param buffer address of the buffer to free
 *
 * @sa tjAlloc()
 */
DLLEXPORT void DLLCALL tjFree(unsigned char *buffer);


/**
 * Returns a descriptive error message explaining why the last command failed.
 *
 * @return a descriptive error message explaining why the last command failed.
 */
DLLEXPORT char* DLLCALL tjGetErrorStr(void);


/* Deprecated functions and macros */
#define TJFLAG_FORCEMMX        8
#define TJFLAG_FORCESSE       16
#define TJFLAG_FORCESSE2      32
#define TJFLAG_FORCESSE3     128


/* Backward compatibility functions and macros (nothing to see here) */
#define NUMSUBOPT TJ_NUMSAMP
#define TJ_444 TJSAMP_444
#define TJ_422 TJSAMP_422
#define TJ_420 TJSAMP_420
#define TJ_411 TJSAMP_420
#define TJ_GRAYSCALE TJSAMP_GRAY

#define TJ_BGR 1
#define TJ_BOTTOMUP TJFLAG_BOTTOMUP
#define TJ_FORCEMMX TJFLAG_FORCEMMX
#define TJ_FORCESSE TJFLAG_FORCESSE
#define TJ_FORCESSE2 TJFLAG_FORCESSE2
#define TJ_ALPHAFIRST 64
#define TJ_FORCESSE3 TJFLAG_FORCESSE3
#define TJ_FASTUPSAMPLE TJFLAG_FASTUPSAMPLE
#define TJ_YUV 512

DLLEXPORT unsigned long DLLCALL TJBUFSIZE(int width, int height);

DLLEXPORT unsigned long DLLCALL TJBUFSIZEYUV(int width, int height,
  int jpegSubsamp);

DLLEXPORT unsigned long DLLCALL tjBufSizeYUV(int width, int height,
  int subsamp);

DLLEXPORT int DLLCALL tjCompress(tjhandle handle, unsigned char *srcBuf,
  int width, int pitch, int height, int pixelSize, unsigned char *dstBuf,
  unsigned long *compressedSize, int jpegSubsamp, int jpegQual, int flags);

DLLEXPORT int DLLCALL tjEncodeYUV(tjhandle handle,
  unsigned char *srcBuf, int width, int pitch, int height, int pixelSize,
  unsigned char *dstBuf, int subsamp, int flags);

DLLEXPORT int DLLCALL tjEncodeYUV2(tjhandle handle,
  unsigned char *srcBuf, int width, int pitch, int height, int pixelFormat,
  unsigned char *dstBuf, int subsamp, int flags);

DLLEXPORT int DLLCALL tjDecompressHeader(tjhandle handle,
  unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height);

DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle handle,
  unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height,
  int *jpegSubsamp);

DLLEXPORT int DLLCALL tjDecompress(tjhandle handle,
  unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
  int width, int pitch, int height, int pixelSize, int flags);

DLLEXPORT int DLLCALL tjDecompressToYUV(tjhandle handle,
  unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
  int flags);


/**
 * @}
 */

#ifdef __cplusplus
}
#endif

#endif