/*
 * Copyright (C) the libgit2 contributors. All rights reserved.
 *
 * This file is part of libgit2, distributed under the GNU GPL v2 with
 * a Linking Exception. For full terms see the included COPYING file.
 */
#ifndef INCLUDE_sys_git_filter_h__
#define INCLUDE_sys_git_filter_h__

#include "git2/filter.h"

/**
 * @file git2/sys/filter.h
 * @brief Git filter backend and plugin routines
 * @defgroup git_backend Git custom backend APIs
 * @ingroup Git
 * @{
 */
GIT_BEGIN_DECL

/**
 * Look up a filter by name
 *
 * @param name The name of the filter
 * @return Pointer to the filter object or NULL if not found
 */
GIT_EXTERN(git_filter *) git_filter_lookup(const char *name);

#define GIT_FILTER_CRLF  "crlf"
#define GIT_FILTER_IDENT "ident"

/**
 * This is priority that the internal CRLF filter will be registered with
 */
#define GIT_FILTER_CRLF_PRIORITY 0

/**
 * This is priority that the internal ident filter will be registered with
 */
#define GIT_FILTER_IDENT_PRIORITY 100

/**
 * This is priority to use with a custom filter to imitate a core Git
 * filter driver, so that it will be run last on checkout and first on
 * checkin.  You do not have to use this, but it helps compatibility.
 */
#define GIT_FILTER_DRIVER_PRIORITY 200

/**
 * Create a new empty filter list
 *
 * Normally you won't use this because `git_filter_list_load` will create
 * the filter list for you, but you can use this in combination with the
 * `git_filter_lookup` and `git_filter_list_push` functions to assemble
 * your own chains of filters.
 */
GIT_EXTERN(int) git_filter_list_new(
	git_filter_list **out,
	git_repository *repo,
	git_filter_mode_t mode,
	uint32_t options);

/**
 * Add a filter to a filter list with the given payload.
 *
 * Normally you won't have to do this because the filter list is created
 * by calling the "check" function on registered filters when the filter
 * attributes are set, but this does allow more direct manipulation of
 * filter lists when desired.
 *
 * Note that normally the "check" function can set up a payload for the
 * filter.  Using this function, you can either pass in a payload if you
 * know the expected payload format, or you can pass NULL.  Some filters
 * may fail with a NULL payload.  Good luck!
 */
GIT_EXTERN(int) git_filter_list_push(
	git_filter_list *fl, git_filter *filter, void *payload);

/**
 * Look up how many filters are in the list
 *
 * We will attempt to apply all of these filters to any data passed in,
 * but note that the filter apply action still has the option of skipping
 * data that is passed in (for example, the CRLF filter will skip data
 * that appears to be binary).
 *
 * @param fl A filter list
 * @return The number of filters in the list
 */
GIT_EXTERN(size_t) git_filter_list_length(const git_filter_list *fl);

/**
 * A filter source represents a file/blob to be processed
 */
typedef struct git_filter_source git_filter_source;

/**
 * Get the repository that the source data is coming from.
 */
GIT_EXTERN(git_repository *) git_filter_source_repo(const git_filter_source *src);

/**
 * Get the path that the source data is coming from.
 */
GIT_EXTERN(const char *) git_filter_source_path(const git_filter_source *src);

/**
 * Get the file mode of the source file
 * If the mode is unknown, this will return 0
 */
GIT_EXTERN(uint16_t) git_filter_source_filemode(const git_filter_source *src);

/**
 * Get the OID of the source
 * If the OID is unknown (often the case with GIT_FILTER_CLEAN) then
 * this will return NULL.
 */
GIT_EXTERN(const git_oid *) git_filter_source_id(const git_filter_source *src);

/**
 * Get the git_filter_mode_t to be used
 */
GIT_EXTERN(git_filter_mode_t) git_filter_source_mode(const git_filter_source *src);

/**
 * Get the combination git_filter_flag_t options to be applied
 */
GIT_EXTERN(uint32_t) git_filter_source_flags(const git_filter_source *src);

/**
 * Initialize callback on filter
 *
 * Specified as `filter.initialize`, this is an optional callback invoked
 * before a filter is first used.  It will be called once at most.
 *
 * If non-NULL, the filter's `initialize` callback will be invoked right
 * before the first use of the filter, so you can defer expensive
 * initialization operations (in case libgit2 is being used in a way that
 * doesn't need the filter).
 */
typedef int (*git_filter_init_fn)(git_filter *self);

/**
 * Shutdown callback on filter
 *
 * Specified as `filter.shutdown`, this is an optional callback invoked
 * when the filter is unregistered or when libgit2 is shutting down.  It
 * will be called once at most and should release resources as needed.
 * This may be called even if the `initialize` callback was not made.
 *
 * Typically this function will free the `git_filter` object itself.
 */
typedef void (*git_filter_shutdown_fn)(git_filter *self);

/**
 * Callback to decide if a given source needs this filter
 *
 * Specified as `filter.check`, this is an optional callback that checks
 * if filtering is needed for a given source.
 *
 * It should return 0 if the filter should be applied (i.e. success),
 * GIT_PASSTHROUGH if the filter should not be applied, or an error code
 * to fail out of the filter processing pipeline and return to the caller.
 *
 * The `attr_values` will be set to the values of any attributes given in
 * the filter definition.  See `git_filter` below for more detail.
 *
 * The `payload` will be a pointer to a reference payload for the filter.
 * This will start as NULL, but `check` can assign to this pointer for
 * later use by the `apply` callback.  Note that the value should be heap
 * allocated (not stack), so that it doesn't go away before the `apply`
 * callback can use it.  If a filter allocates and assigns a value to the
 * `payload`, it will need a `cleanup` callback to free the payload.
 */
typedef int (*git_filter_check_fn)(
	git_filter  *self,
	void       **payload, /* points to NULL ptr on entry, may be set */
	const git_filter_source *src,
	const char **attr_values);

/**
 * Callback to actually perform the data filtering
 *
 * Specified as `filter.apply`, this is the callback that actually filters
 * data.  If it successfully writes the output, it should return 0.  Like
 * `check`, it can return GIT_PASSTHROUGH to indicate that the filter
 * doesn't want to run.  Other error codes will stop filter processing and
 * return to the caller.
 *
 * The `payload` value will refer to any payload that was set by the
 * `check` callback.  It may be read from or written to as needed.
 */
typedef int (*git_filter_apply_fn)(
	git_filter    *self,
	void         **payload, /* may be read and/or set */
	git_buf       *to,
	const git_buf *from,
	const git_filter_source *src);

typedef int (*git_filter_stream_fn)(
	git_writestream **out,
	git_filter *self,
	void **payload,
	const git_filter_source *src,
	git_writestream *next);

/**
 * Callback to clean up after filtering has been applied
 *
 * Specified as `filter.cleanup`, this is an optional callback invoked
 * after the filter has been applied.  If the `check` or `apply` callbacks
 * allocated a `payload` to keep per-source filter state, use this
 * callback to free that payload and release resources as required.
 */
typedef void (*git_filter_cleanup_fn)(
	git_filter *self,
	void       *payload);

/**
 * Filter structure used to register custom filters.
 *
 * To associate extra data with a filter, allocate extra data and put the
 * `git_filter` struct at the start of your data buffer, then cast the
 * `self` pointer to your larger structure when your callback is invoked.
 */
struct git_filter {
	/** The `version` field should be set to `GIT_FILTER_VERSION`. */
	unsigned int           version;

 	/**
	 * A whitespace-separated list of attribute names to check for this
	 * filter (e.g. "eol crlf text").  If the attribute name is bare, it
	 * will be simply loaded and passed to the `check` callback.  If it
	 * has a value (i.e. "name=value"), the attribute must match that
	 * value for the filter to be applied.  The value may be a wildcard
	 * (eg, "name=*"), in which case the filter will be invoked for any
	 * value for the given attribute name.  See the attribute parameter
	 * of the `check` callback for the attribute value that was specified.
	 */
	const char            *attributes;

	/** Called when the filter is first used for any file. */
	git_filter_init_fn     initialize;

	/** Called when the filter is removed or unregistered from the system. */
	git_filter_shutdown_fn shutdown;

	/**
	 * Called to determine whether the filter should be invoked for a
	 * given file.  If this function returns `GIT_PASSTHROUGH` then the
	 * `apply` function will not be invoked and the contents will be passed
	 * through unmodified.
	 */
	git_filter_check_fn    check;

	/**
	 * Called to actually apply the filter to file contents.  If this
	 * function returns `GIT_PASSTHROUGH` then the contents will be passed
	 * through unmodified.
	 */
	git_filter_apply_fn    apply;

	/**
	 * Called to apply the filter in a streaming manner.  If this is not
	 * specified then the system will call `apply` with the whole buffer.
	 */
	git_filter_stream_fn   stream;

	/** Called when the system is done filtering for a file. */
	git_filter_cleanup_fn  cleanup;
};

#define GIT_FILTER_VERSION 1
#define GIT_FILTER_INIT {GIT_FILTER_VERSION}
/**
 * Register a filter under a given name with a given priority.
 *
 * As mentioned elsewhere, the initialize callback will not be invoked
 * immediately.  It is deferred until the filter is used in some way.
 *
 * A filter's attribute checks and `check` and `apply` callbacks will be
 * issued in order of `priority` on smudge (to workdir), and in reverse
 * order of `priority` on clean (to odb).
 *
 * Two filters are preregistered with libgit2:
 * - GIT_FILTER_CRLF with priority 0
 * - GIT_FILTER_IDENT with priority 100
 *
 * Currently the filter registry is not thread safe, so any registering or
 * deregistering of filters must be done outside of any possible usage of
 * the filters (i.e. during application setup or shutdown).
 *
 * @param name A name by which the filter can be referenced.  Attempting
 * 			to register with an in-use name will return GIT_EEXISTS.
 * @param filter The filter definition.  This pointer will be stored as is
 * 			by libgit2 so it must be a durable allocation (either static
 * 			or on the heap).
 * @param priority The priority for filter application
 * @return 0 on successful registry, error code <0 on failure
 */
GIT_EXTERN(int) git_filter_register(
	const char *name, git_filter *filter, int priority);

/**
 * Remove the filter with the given name
 *
 * Attempting to remove the builtin libgit2 filters is not permitted and
 * will return an error.
 *
 * Currently the filter registry is not thread safe, so any registering or
 * deregistering of filters must be done outside of any possible usage of
 * the filters (i.e. during application setup or shutdown).
 *
 * @param name The name under which the filter was registered
 * @return 0 on success, error code <0 on failure
 */
GIT_EXTERN(int) git_filter_unregister(const char *name);

/** @} */
GIT_END_DECL
#endif