# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = testsuite
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/fficonfig.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
DEJATOOL = $(PACKAGE)
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMTAR = @AMTAR@
AM_LTLDFLAGS = @AM_LTLDFLAGS@
AM_RUNTESTFLAGS = 
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FFI_EXEC_TRAMPOLINE_TABLE = @FFI_EXEC_TRAMPOLINE_TABLE@
FGREP = @FGREP@
GREP = @GREP@
HAVE_LONG_DOUBLE = @HAVE_LONG_DOUBLE@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TARGET = @TARGET@
TARGETDIR = @TARGETDIR@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sys_symbol_underscore = @sys_symbol_underscore@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
toolexecdir = @toolexecdir@
toolexeclibdir = @toolexeclibdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign dejagnu

# Setup the testing framework, if you have one
EXPECT = `if [ -f $(top_builddir)/../expect/expect ] ; then \
            echo $(top_builddir)/../expect/expect ; \
          else echo expect ; fi`

RUNTEST = `if [ -f $(top_srcdir)/../dejagnu/runtest ] ; then \
	       echo $(top_srcdir)/../dejagnu/runtest ; \
	    else echo runtest; fi`

CLEANFILES = *.exe core* *.log *.sum
EXTRA_DIST = libffi.special/special.exp	\
libffi.special/unwindtest_ffi_call.cc libffi.special/unwindtest.cc \
libffi.special/ffitestcxx.h config/default.exp lib/target-libpath.exp \
lib/libffi.exp lib/wrapper.exp libffi.call/float.c \
libffi.call/cls_multi_schar.c libffi.call/float3.c \
libffi.call/cls_3_1byte.c libffi.call/stret_large2.c \
libffi.call/cls_5_1_byte.c libffi.call/stret_medium.c \
libffi.call/promotion.c libffi.call/cls_dbls_struct.c \
libffi.call/nested_struct.c libffi.call/closure_fn1.c \
libffi.call/cls_4_1byte.c libffi.call/cls_float.c \
libffi.call/cls_2byte.c libffi.call/closure_fn4.c \
libffi.call/return_fl2.c libffi.call/nested_struct7.c \
libffi.call/cls_uint.c libffi.call/cls_align_sint64.c \
libffi.call/float1.c libffi.call/cls_19byte.c \
libffi.call/nested_struct1.c libffi.call/cls_4byte.c \
libffi.call/return_fl1.c libffi.call/cls_align_pointer.c \
libffi.call/nested_struct4.c libffi.call/nested_struct3.c \
libffi.call/struct7.c libffi.call/nested_struct9.c \
libffi.call/cls_sshort.c libffi.call/cls_ulonglong.c \
libffi.call/cls_pointer_stack.c libffi.call/cls_multi_uchar.c \
libffi.call/testclosure.c libffi.call/cls_3byte1.c \
libffi.call/struct6.c libffi.call/return_uc.c libffi.call/return_ll1.c \
libffi.call/cls_ushort.c libffi.call/stret_medium2.c \
libffi.call/cls_multi_ushortchar.c libffi.call/return_dbl2.c \
libffi.call/closure_loc_fn0.c libffi.call/return_sc.c \
libffi.call/nested_struct8.c libffi.call/cls_7_1_byte.c	\
libffi.call/return_ll.c libffi.call/cls_pointer.c \
libffi.call/err_bad_abi.c libffi.call/return_dbl1.c \
libffi.call/call.exp libffi.call/ffitest.h libffi.call/strlen.c	\
libffi.call/return_sl.c libffi.call/cls_1_1byte.c \
libffi.call/struct1.c libffi.call/cls_64byte.c libffi.call/return_ul.c \
libffi.call/cls_double.c libffi.call/many_win32.c \
libffi.call/cls_16byte.c libffi.call/cls_align_double.c	\
libffi.call/cls_align_uint16.c libffi.call/cls_9byte1.c	\
libffi.call/cls_multi_sshortchar.c libffi.call/cls_multi_ushort.c \
libffi.call/closure_stdcall.c libffi.call/return_fl.c \
libffi.call/strlen_win32.c libffi.call/return_ldl.c \
libffi.call/cls_align_float.c libffi.call/struct3.c \
libffi.call/cls_uchar.c libffi.call/cls_sint.c libffi.call/float2.c \
libffi.call/cls_align_longdouble_split.c \
libffi.call/cls_longdouble_va.c libffi.call/cls_multi_sshort.c \
libffi.call/stret_large.c libffi.call/cls_align_sint16.c \
libffi.call/nested_struct6.c libffi.call/cls_5byte.c \
libffi.call/return_dbl.c libffi.call/cls_20byte.c \
libffi.call/cls_8byte.c libffi.call/pyobjc-tc.c	\
libffi.call/cls_24byte.c libffi.call/cls_align_longdouble_split2.c \
libffi.call/cls_6_1_byte.c libffi.call/cls_schar.c \
libffi.call/cls_18byte.c libffi.call/closure_fn3.c \
libffi.call/err_bad_typedef.c libffi.call/closure_fn2.c	\
libffi.call/struct2.c libffi.call/cls_3byte2.c \
libffi.call/cls_align_longdouble.c libffi.call/cls_20byte1.c \
libffi.call/return_fl3.c libffi.call/cls_align_uint32.c	\
libffi.call/problem1.c libffi.call/float4.c \
libffi.call/cls_align_uint64.c libffi.call/struct9.c \
libffi.call/closure_fn5.c libffi.call/cls_align_sint32.c \
libffi.call/closure_fn0.c libffi.call/closure_fn6.c \
libffi.call/struct4.c libffi.call/nested_struct2.c \
libffi.call/cls_6byte.c libffi.call/cls_7byte.c libffi.call/many.c \
libffi.call/struct8.c libffi.call/negint.c libffi.call/struct5.c \
libffi.call/cls_12byte.c libffi.call/cls_double_va.c \
libffi.call/cls_longdouble.c libffi.call/cls_9byte2.c \
libffi.call/nested_struct10.c libffi.call/nested_struct5.c \
libffi.call/huge_struct.c

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign testsuite/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign testsuite/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


check-DEJAGNU: site.exp
	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	runtest=$(RUNTEST); \
	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
	  exit_status=0; l='$(DEJATOOL)'; for tool in $$l; do \
	    if $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
	    then :; else exit_status=1; fi; \
	  done; \
	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
	fi; \
	exit $$exit_status
site.exp: Makefile
	@echo 'Making a new site.exp file...'
	@echo '## these variables are automatically generated by make ##' >site.tmp
	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
	@echo '# edit the last section' >>site.tmp
	@echo 'set srcdir $(srcdir)' >>site.tmp
	@echo "set objdir `pwd`" >>site.tmp
	@echo 'set build_alias "$(build_alias)"' >>site.tmp
	@echo 'set build_triplet $(build_triplet)' >>site.tmp
	@echo 'set host_alias "$(host_alias)"' >>site.tmp
	@echo 'set host_triplet $(host_triplet)' >>site.tmp
	@echo 'set target_alias "$(target_alias)"' >>site.tmp
	@echo 'set target_triplet $(target_triplet)' >>site.tmp
	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
	@test ! -f site.exp || \
	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
	@-rm -f site.bak
	@test ! -f site.exp || mv site.exp site.bak
	@mv site.tmp site.exp

distclean-DEJAGNU:
	-rm -f site.exp site.bak
	-l='$(DEJATOOL)'; for tool in $$l; do \
	  rm -f $$tool.sum $$tool.log; \
	done

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-DEJAGNU distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: check-am install-am install-strip

.PHONY: all all-am check check-DEJAGNU check-am clean clean-generic \
	clean-libtool distclean distclean-DEJAGNU distclean-generic \
	distclean-libtool distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: