| /*- |
| * Copyright (c) 2003-2007 Tim Kientzle |
| * Copyright (c) 2009 Andreas Henriksson <andreas@fatal.se> |
| * Copyright (c) 2009-2012 Michihiro NAKAJIMA |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "archive_platform.h" |
| __FBSDID("$FreeBSD: head/lib/libarchive/archive_read_support_format_iso9660.c 201246 2009-12-30 05:30:35Z kientzle $"); |
| |
| #ifdef HAVE_ERRNO_H |
| #include <errno.h> |
| #endif |
| /* #include <stdint.h> */ /* See archive_platform.h */ |
| #include <stdio.h> |
| #ifdef HAVE_STDLIB_H |
| #include <stdlib.h> |
| #endif |
| #ifdef HAVE_STRING_H |
| #include <string.h> |
| #endif |
| #include <time.h> |
| #ifdef HAVE_ZLIB_H |
| #include <zlib.h> |
| #endif |
| |
| #include "archive.h" |
| #include "archive_endian.h" |
| #include "archive_entry.h" |
| #include "archive_entry_locale.h" |
| #include "archive_private.h" |
| #include "archive_read_private.h" |
| #include "archive_string.h" |
| |
| /* |
| * An overview of ISO 9660 format: |
| * |
| * Each disk is laid out as follows: |
| * * 32k reserved for private use |
| * * Volume descriptor table. Each volume descriptor |
| * is 2k and specifies basic format information. |
| * The "Primary Volume Descriptor" (PVD) is defined by the |
| * standard and should always be present; other volume |
| * descriptors include various vendor-specific extensions. |
| * * Files and directories. Each file/dir is specified by |
| * an "extent" (starting sector and length in bytes). |
| * Dirs are just files with directory records packed one |
| * after another. The PVD contains a single dir entry |
| * specifying the location of the root directory. Everything |
| * else follows from there. |
| * |
| * This module works by first reading the volume descriptors, then |
| * building a list of directory entries, sorted by starting |
| * sector. At each step, I look for the earliest dir entry that |
| * hasn't yet been read, seek forward to that location and read |
| * that entry. If it's a dir, I slurp in the new dir entries and |
| * add them to the heap; if it's a regular file, I return the |
| * corresponding archive_entry and wait for the client to request |
| * the file body. This strategy allows us to read most compliant |
| * CDs with a single pass through the data, as required by libarchive. |
| */ |
| #define LOGICAL_BLOCK_SIZE 2048 |
| #define SYSTEM_AREA_BLOCK 16 |
| |
| /* Structure of on-disk primary volume descriptor. */ |
| #define PVD_type_offset 0 |
| #define PVD_type_size 1 |
| #define PVD_id_offset (PVD_type_offset + PVD_type_size) |
| #define PVD_id_size 5 |
| #define PVD_version_offset (PVD_id_offset + PVD_id_size) |
| #define PVD_version_size 1 |
| #define PVD_reserved1_offset (PVD_version_offset + PVD_version_size) |
| #define PVD_reserved1_size 1 |
| #define PVD_system_id_offset (PVD_reserved1_offset + PVD_reserved1_size) |
| #define PVD_system_id_size 32 |
| #define PVD_volume_id_offset (PVD_system_id_offset + PVD_system_id_size) |
| #define PVD_volume_id_size 32 |
| #define PVD_reserved2_offset (PVD_volume_id_offset + PVD_volume_id_size) |
| #define PVD_reserved2_size 8 |
| #define PVD_volume_space_size_offset (PVD_reserved2_offset + PVD_reserved2_size) |
| #define PVD_volume_space_size_size 8 |
| #define PVD_reserved3_offset (PVD_volume_space_size_offset + PVD_volume_space_size_size) |
| #define PVD_reserved3_size 32 |
| #define PVD_volume_set_size_offset (PVD_reserved3_offset + PVD_reserved3_size) |
| #define PVD_volume_set_size_size 4 |
| #define PVD_volume_sequence_number_offset (PVD_volume_set_size_offset + PVD_volume_set_size_size) |
| #define PVD_volume_sequence_number_size 4 |
| #define PVD_logical_block_size_offset (PVD_volume_sequence_number_offset + PVD_volume_sequence_number_size) |
| #define PVD_logical_block_size_size 4 |
| #define PVD_path_table_size_offset (PVD_logical_block_size_offset + PVD_logical_block_size_size) |
| #define PVD_path_table_size_size 8 |
| #define PVD_type_1_path_table_offset (PVD_path_table_size_offset + PVD_path_table_size_size) |
| #define PVD_type_1_path_table_size 4 |
| #define PVD_opt_type_1_path_table_offset (PVD_type_1_path_table_offset + PVD_type_1_path_table_size) |
| #define PVD_opt_type_1_path_table_size 4 |
| #define PVD_type_m_path_table_offset (PVD_opt_type_1_path_table_offset + PVD_opt_type_1_path_table_size) |
| #define PVD_type_m_path_table_size 4 |
| #define PVD_opt_type_m_path_table_offset (PVD_type_m_path_table_offset + PVD_type_m_path_table_size) |
| #define PVD_opt_type_m_path_table_size 4 |
| #define PVD_root_directory_record_offset (PVD_opt_type_m_path_table_offset + PVD_opt_type_m_path_table_size) |
| #define PVD_root_directory_record_size 34 |
| #define PVD_volume_set_id_offset (PVD_root_directory_record_offset + PVD_root_directory_record_size) |
| #define PVD_volume_set_id_size 128 |
| #define PVD_publisher_id_offset (PVD_volume_set_id_offset + PVD_volume_set_id_size) |
| #define PVD_publisher_id_size 128 |
| #define PVD_preparer_id_offset (PVD_publisher_id_offset + PVD_publisher_id_size) |
| #define PVD_preparer_id_size 128 |
| #define PVD_application_id_offset (PVD_preparer_id_offset + PVD_preparer_id_size) |
| #define PVD_application_id_size 128 |
| #define PVD_copyright_file_id_offset (PVD_application_id_offset + PVD_application_id_size) |
| #define PVD_copyright_file_id_size 37 |
| #define PVD_abstract_file_id_offset (PVD_copyright_file_id_offset + PVD_copyright_file_id_size) |
| #define PVD_abstract_file_id_size 37 |
| #define PVD_bibliographic_file_id_offset (PVD_abstract_file_id_offset + PVD_abstract_file_id_size) |
| #define PVD_bibliographic_file_id_size 37 |
| #define PVD_creation_date_offset (PVD_bibliographic_file_id_offset + PVD_bibliographic_file_id_size) |
| #define PVD_creation_date_size 17 |
| #define PVD_modification_date_offset (PVD_creation_date_offset + PVD_creation_date_size) |
| #define PVD_modification_date_size 17 |
| #define PVD_expiration_date_offset (PVD_modification_date_offset + PVD_modification_date_size) |
| #define PVD_expiration_date_size 17 |
| #define PVD_effective_date_offset (PVD_expiration_date_offset + PVD_expiration_date_size) |
| #define PVD_effective_date_size 17 |
| #define PVD_file_structure_version_offset (PVD_effective_date_offset + PVD_effective_date_size) |
| #define PVD_file_structure_version_size 1 |
| #define PVD_reserved4_offset (PVD_file_structure_version_offset + PVD_file_structure_version_size) |
| #define PVD_reserved4_size 1 |
| #define PVD_application_data_offset (PVD_reserved4_offset + PVD_reserved4_size) |
| #define PVD_application_data_size 512 |
| #define PVD_reserved5_offset (PVD_application_data_offset + PVD_application_data_size) |
| #define PVD_reserved5_size (2048 - PVD_reserved5_offset) |
| |
| /* TODO: It would make future maintenance easier to just hardcode the |
| * above values. In particular, ECMA119 states the offsets as part of |
| * the standard. That would eliminate the need for the following check.*/ |
| #if PVD_reserved5_offset != 1395 |
| #error PVD offset and size definitions are wrong. |
| #endif |
| |
| |
| /* Structure of optional on-disk supplementary volume descriptor. */ |
| #define SVD_type_offset 0 |
| #define SVD_type_size 1 |
| #define SVD_id_offset (SVD_type_offset + SVD_type_size) |
| #define SVD_id_size 5 |
| #define SVD_version_offset (SVD_id_offset + SVD_id_size) |
| #define SVD_version_size 1 |
| /* ... */ |
| #define SVD_reserved1_offset 72 |
| #define SVD_reserved1_size 8 |
| #define SVD_volume_space_size_offset 80 |
| #define SVD_volume_space_size_size 8 |
| #define SVD_escape_sequences_offset (SVD_volume_space_size_offset + SVD_volume_space_size_size) |
| #define SVD_escape_sequences_size 32 |
| /* ... */ |
| #define SVD_logical_block_size_offset 128 |
| #define SVD_logical_block_size_size 4 |
| #define SVD_type_L_path_table_offset 140 |
| #define SVD_type_M_path_table_offset 148 |
| /* ... */ |
| #define SVD_root_directory_record_offset 156 |
| #define SVD_root_directory_record_size 34 |
| #define SVD_file_structure_version_offset 881 |
| #define SVD_reserved2_offset 882 |
| #define SVD_reserved2_size 1 |
| #define SVD_reserved3_offset 1395 |
| #define SVD_reserved3_size 653 |
| /* ... */ |
| /* FIXME: validate correctness of last SVD entry offset. */ |
| |
| /* Structure of an on-disk directory record. */ |
| /* Note: ISO9660 stores each multi-byte integer twice, once in |
| * each byte order. The sizes here are the size of just one |
| * of the two integers. (This is why the offset of a field isn't |
| * the same as the offset+size of the previous field.) */ |
| #define DR_length_offset 0 |
| #define DR_length_size 1 |
| #define DR_ext_attr_length_offset 1 |
| #define DR_ext_attr_length_size 1 |
| #define DR_extent_offset 2 |
| #define DR_extent_size 4 |
| #define DR_size_offset 10 |
| #define DR_size_size 4 |
| #define DR_date_offset 18 |
| #define DR_date_size 7 |
| #define DR_flags_offset 25 |
| #define DR_flags_size 1 |
| #define DR_file_unit_size_offset 26 |
| #define DR_file_unit_size_size 1 |
| #define DR_interleave_offset 27 |
| #define DR_interleave_size 1 |
| #define DR_volume_sequence_number_offset 28 |
| #define DR_volume_sequence_number_size 2 |
| #define DR_name_len_offset 32 |
| #define DR_name_len_size 1 |
| #define DR_name_offset 33 |
| |
| #ifdef HAVE_ZLIB_H |
| static const unsigned char zisofs_magic[8] = { |
| 0x37, 0xE4, 0x53, 0x96, 0xC9, 0xDB, 0xD6, 0x07 |
| }; |
| |
| struct zisofs { |
| /* Set 1 if this file compressed by paged zlib */ |
| int pz; |
| int pz_log2_bs; /* Log2 of block size */ |
| uint64_t pz_uncompressed_size; |
| |
| int initialized; |
| unsigned char *uncompressed_buffer; |
| size_t uncompressed_buffer_size; |
| |
| uint32_t pz_offset; |
| unsigned char header[16]; |
| size_t header_avail; |
| int header_passed; |
| unsigned char *block_pointers; |
| size_t block_pointers_alloc; |
| size_t block_pointers_size; |
| size_t block_pointers_avail; |
| size_t block_off; |
| uint32_t block_avail; |
| |
| z_stream stream; |
| int stream_valid; |
| }; |
| #else |
| struct zisofs { |
| /* Set 1 if this file compressed by paged zlib */ |
| int pz; |
| }; |
| #endif |
| |
| struct content { |
| uint64_t offset;/* Offset on disk. */ |
| uint64_t size; /* File size in bytes. */ |
| struct content *next; |
| }; |
| |
| /* In-memory storage for a directory record. */ |
| struct file_info { |
| struct file_info *use_next; |
| struct file_info *parent; |
| struct file_info *next; |
| struct file_info *re_next; |
| int subdirs; |
| uint64_t key; /* Heap Key. */ |
| uint64_t offset; /* Offset on disk. */ |
| uint64_t size; /* File size in bytes. */ |
| uint32_t ce_offset; /* Offset of CE. */ |
| uint32_t ce_size; /* Size of CE. */ |
| char rr_moved; /* Flag to rr_moved. */ |
| char rr_moved_has_re_only; |
| char re; /* Having RRIP "RE" extension. */ |
| char re_descendant; |
| uint64_t cl_offset; /* Having RRIP "CL" extension. */ |
| int birthtime_is_set; |
| time_t birthtime; /* File created time. */ |
| time_t mtime; /* File last modified time. */ |
| time_t atime; /* File last accessed time. */ |
| time_t ctime; /* File attribute change time. */ |
| uint64_t rdev; /* Device number. */ |
| mode_t mode; |
| uid_t uid; |
| gid_t gid; |
| int64_t number; |
| int nlinks; |
| struct archive_string name; /* Pathname */ |
| unsigned char *utf16be_name; |
| size_t utf16be_bytes; |
| char name_continues; /* Non-zero if name continues */ |
| struct archive_string symlink; |
| char symlink_continues; /* Non-zero if link continues */ |
| /* Set 1 if this file compressed by paged zlib(zisofs) */ |
| int pz; |
| int pz_log2_bs; /* Log2 of block size */ |
| uint64_t pz_uncompressed_size; |
| /* Set 1 if this file is multi extent. */ |
| int multi_extent; |
| struct { |
| struct content *first; |
| struct content **last; |
| } contents; |
| struct { |
| struct file_info *first; |
| struct file_info **last; |
| } rede_files; |
| }; |
| |
| struct heap_queue { |
| struct file_info **files; |
| int allocated; |
| int used; |
| }; |
| |
| struct iso9660 { |
| int magic; |
| #define ISO9660_MAGIC 0x96609660 |
| |
| int opt_support_joliet; |
| int opt_support_rockridge; |
| |
| struct archive_string pathname; |
| char seenRockridge; /* Set true if RR extensions are used. */ |
| char seenSUSP; /* Set true if SUSP is being used. */ |
| char seenJoliet; |
| |
| unsigned char suspOffset; |
| struct file_info *rr_moved; |
| struct read_ce_queue { |
| struct read_ce_req { |
| uint64_t offset;/* Offset of CE on disk. */ |
| struct file_info *file; |
| } *reqs; |
| int cnt; |
| int allocated; |
| } read_ce_req; |
| |
| int64_t previous_number; |
| struct archive_string previous_pathname; |
| |
| struct file_info *use_files; |
| struct heap_queue pending_files; |
| struct { |
| struct file_info *first; |
| struct file_info **last; |
| } cache_files; |
| struct { |
| struct file_info *first; |
| struct file_info **last; |
| } re_files; |
| |
| uint64_t current_position; |
| ssize_t logical_block_size; |
| uint64_t volume_size; /* Total size of volume in bytes. */ |
| int32_t volume_block;/* Total size of volume in logical blocks. */ |
| |
| struct vd { |
| int location; /* Location of Extent. */ |
| uint32_t size; |
| } primary, joliet; |
| |
| int64_t entry_sparse_offset; |
| int64_t entry_bytes_remaining; |
| size_t entry_bytes_unconsumed; |
| struct zisofs entry_zisofs; |
| struct content *entry_content; |
| struct archive_string_conv *sconv_utf16be; |
| /* |
| * Buffers for a full pathname in UTF-16BE in Joliet extensions. |
| */ |
| #define UTF16_NAME_MAX 1024 |
| unsigned char *utf16be_path; |
| size_t utf16be_path_len; |
| unsigned char *utf16be_previous_path; |
| size_t utf16be_previous_path_len; |
| /* Null buffer used in bidder to improve its performance. */ |
| unsigned char null[2048]; |
| }; |
| |
| static int archive_read_format_iso9660_bid(struct archive_read *, int); |
| static int archive_read_format_iso9660_options(struct archive_read *, |
| const char *, const char *); |
| static int archive_read_format_iso9660_cleanup(struct archive_read *); |
| static int archive_read_format_iso9660_read_data(struct archive_read *, |
| const void **, size_t *, int64_t *); |
| static int archive_read_format_iso9660_read_data_skip(struct archive_read *); |
| static int archive_read_format_iso9660_read_header(struct archive_read *, |
| struct archive_entry *); |
| static const char *build_pathname(struct archive_string *, struct file_info *, int); |
| static int build_pathname_utf16be(unsigned char *, size_t, size_t *, |
| struct file_info *); |
| #if DEBUG |
| static void dump_isodirrec(FILE *, const unsigned char *isodirrec); |
| #endif |
| static time_t time_from_tm(struct tm *); |
| static time_t isodate17(const unsigned char *); |
| static time_t isodate7(const unsigned char *); |
| static int isBootRecord(struct iso9660 *, const unsigned char *); |
| static int isVolumePartition(struct iso9660 *, const unsigned char *); |
| static int isVDSetTerminator(struct iso9660 *, const unsigned char *); |
| static int isJolietSVD(struct iso9660 *, const unsigned char *); |
| static int isSVD(struct iso9660 *, const unsigned char *); |
| static int isEVD(struct iso9660 *, const unsigned char *); |
| static int isPVD(struct iso9660 *, const unsigned char *); |
| static int next_cache_entry(struct archive_read *, struct iso9660 *, |
| struct file_info **); |
| static int next_entry_seek(struct archive_read *, struct iso9660 *, |
| struct file_info **); |
| static struct file_info * |
| parse_file_info(struct archive_read *a, |
| struct file_info *parent, const unsigned char *isodirrec); |
| static int parse_rockridge(struct archive_read *a, |
| struct file_info *file, const unsigned char *start, |
| const unsigned char *end); |
| static int register_CE(struct archive_read *a, int32_t location, |
| struct file_info *file); |
| static int read_CE(struct archive_read *a, struct iso9660 *iso9660); |
| static void parse_rockridge_NM1(struct file_info *, |
| const unsigned char *, int); |
| static void parse_rockridge_SL1(struct file_info *, |
| const unsigned char *, int); |
| static void parse_rockridge_TF1(struct file_info *, |
| const unsigned char *, int); |
| static void parse_rockridge_ZF1(struct file_info *, |
| const unsigned char *, int); |
| static void register_file(struct iso9660 *, struct file_info *); |
| static void release_files(struct iso9660 *); |
| static unsigned toi(const void *p, int n); |
| static inline void re_add_entry(struct iso9660 *, struct file_info *); |
| static inline struct file_info * re_get_entry(struct iso9660 *); |
| static inline int rede_add_entry(struct file_info *); |
| static inline struct file_info * rede_get_entry(struct file_info *); |
| static inline void cache_add_entry(struct iso9660 *iso9660, |
| struct file_info *file); |
| static inline struct file_info *cache_get_entry(struct iso9660 *iso9660); |
| static int heap_add_entry(struct archive_read *a, struct heap_queue *heap, |
| struct file_info *file, uint64_t key); |
| static struct file_info *heap_get_entry(struct heap_queue *heap); |
| |
| #define add_entry(arch, iso9660, file) \ |
| heap_add_entry(arch, &((iso9660)->pending_files), file, file->offset) |
| #define next_entry(iso9660) \ |
| heap_get_entry(&((iso9660)->pending_files)) |
| |
| int |
| archive_read_support_format_iso9660(struct archive *_a) |
| { |
| struct archive_read *a = (struct archive_read *)_a; |
| struct iso9660 *iso9660; |
| int r; |
| |
| archive_check_magic(_a, ARCHIVE_READ_MAGIC, |
| ARCHIVE_STATE_NEW, "archive_read_support_format_iso9660"); |
| |
| iso9660 = (struct iso9660 *)calloc(1, sizeof(*iso9660)); |
| if (iso9660 == NULL) { |
| archive_set_error(&a->archive, ENOMEM, |
| "Can't allocate iso9660 data"); |
| return (ARCHIVE_FATAL); |
| } |
| iso9660->magic = ISO9660_MAGIC; |
| iso9660->cache_files.first = NULL; |
| iso9660->cache_files.last = &(iso9660->cache_files.first); |
| iso9660->re_files.first = NULL; |
| iso9660->re_files.last = &(iso9660->re_files.first); |
| /* Enable to support Joliet extensions by default. */ |
| iso9660->opt_support_joliet = 1; |
| /* Enable to support Rock Ridge extensions by default. */ |
| iso9660->opt_support_rockridge = 1; |
| |
| r = __archive_read_register_format(a, |
| iso9660, |
| "iso9660", |
| archive_read_format_iso9660_bid, |
| archive_read_format_iso9660_options, |
| archive_read_format_iso9660_read_header, |
| archive_read_format_iso9660_read_data, |
| archive_read_format_iso9660_read_data_skip, |
| NULL, |
| archive_read_format_iso9660_cleanup, |
| NULL, |
| NULL); |
| |
| if (r != ARCHIVE_OK) { |
| free(iso9660); |
| return (r); |
| } |
| return (ARCHIVE_OK); |
| } |
| |
| |
| static int |
| archive_read_format_iso9660_bid(struct archive_read *a, int best_bid) |
| { |
| struct iso9660 *iso9660; |
| ssize_t bytes_read; |
| const unsigned char *p; |
| int seenTerminator; |
| |
| /* If there's already a better bid than we can ever |
| make, don't bother testing. */ |
| if (best_bid > 48) |
| return (-1); |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| |
| /* |
| * Skip the first 32k (reserved area) and get the first |
| * 8 sectors of the volume descriptor table. Of course, |
| * if the I/O layer gives us more, we'll take it. |
| */ |
| #define RESERVED_AREA (SYSTEM_AREA_BLOCK * LOGICAL_BLOCK_SIZE) |
| p = __archive_read_ahead(a, |
| RESERVED_AREA + 8 * LOGICAL_BLOCK_SIZE, |
| &bytes_read); |
| if (p == NULL) |
| return (-1); |
| |
| /* Skip the reserved area. */ |
| bytes_read -= RESERVED_AREA; |
| p += RESERVED_AREA; |
| |
| /* Check each volume descriptor. */ |
| seenTerminator = 0; |
| for (; bytes_read > LOGICAL_BLOCK_SIZE; |
| bytes_read -= LOGICAL_BLOCK_SIZE, p += LOGICAL_BLOCK_SIZE) { |
| /* Do not handle undefined Volume Descriptor Type. */ |
| if (p[0] >= 4 && p[0] <= 254) |
| return (0); |
| /* Standard Identifier must be "CD001" */ |
| if (memcmp(p + 1, "CD001", 5) != 0) |
| return (0); |
| if (isPVD(iso9660, p)) |
| continue; |
| if (!iso9660->joliet.location) { |
| if (isJolietSVD(iso9660, p)) |
| continue; |
| } |
| if (isBootRecord(iso9660, p)) |
| continue; |
| if (isEVD(iso9660, p)) |
| continue; |
| if (isSVD(iso9660, p)) |
| continue; |
| if (isVolumePartition(iso9660, p)) |
| continue; |
| if (isVDSetTerminator(iso9660, p)) { |
| seenTerminator = 1; |
| break; |
| } |
| return (0); |
| } |
| /* |
| * ISO 9660 format must have Primary Volume Descriptor and |
| * Volume Descriptor Set Terminator. |
| */ |
| if (seenTerminator && iso9660->primary.location > 16) |
| return (48); |
| |
| /* We didn't find a valid PVD; return a bid of zero. */ |
| return (0); |
| } |
| |
| static int |
| archive_read_format_iso9660_options(struct archive_read *a, |
| const char *key, const char *val) |
| { |
| struct iso9660 *iso9660; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| |
| if (strcmp(key, "joliet") == 0) { |
| if (val == NULL || strcmp(val, "off") == 0 || |
| strcmp(val, "ignore") == 0 || |
| strcmp(val, "disable") == 0 || |
| strcmp(val, "0") == 0) |
| iso9660->opt_support_joliet = 0; |
| else |
| iso9660->opt_support_joliet = 1; |
| return (ARCHIVE_OK); |
| } |
| if (strcmp(key, "rockridge") == 0 || |
| strcmp(key, "Rockridge") == 0) { |
| iso9660->opt_support_rockridge = val != NULL; |
| return (ARCHIVE_OK); |
| } |
| |
| /* Note: The "warn" return is just to inform the options |
| * supervisor that we didn't handle it. It will generate |
| * a suitable error if no one used this option. */ |
| return (ARCHIVE_WARN); |
| } |
| |
| static int |
| isNull(struct iso9660 *iso9660, const unsigned char *h, unsigned offset, |
| unsigned bytes) |
| { |
| |
| while (bytes >= sizeof(iso9660->null)) { |
| if (!memcmp(iso9660->null, h + offset, sizeof(iso9660->null))) |
| return (0); |
| offset += sizeof(iso9660->null); |
| bytes -= sizeof(iso9660->null); |
| } |
| if (bytes) |
| return memcmp(iso9660->null, h + offset, bytes) == 0; |
| else |
| return (1); |
| } |
| |
| static int |
| isBootRecord(struct iso9660 *iso9660, const unsigned char *h) |
| { |
| (void)iso9660; /* UNUSED */ |
| |
| /* Type of the Volume Descriptor Boot Record must be 0. */ |
| if (h[0] != 0) |
| return (0); |
| |
| /* Volume Descriptor Version must be 1. */ |
| if (h[6] != 1) |
| return (0); |
| |
| return (1); |
| } |
| |
| static int |
| isVolumePartition(struct iso9660 *iso9660, const unsigned char *h) |
| { |
| int32_t location; |
| |
| /* Type of the Volume Partition Descriptor must be 3. */ |
| if (h[0] != 3) |
| return (0); |
| |
| /* Volume Descriptor Version must be 1. */ |
| if (h[6] != 1) |
| return (0); |
| /* Unused Field */ |
| if (h[7] != 0) |
| return (0); |
| |
| location = archive_le32dec(h + 72); |
| if (location <= SYSTEM_AREA_BLOCK || |
| location >= iso9660->volume_block) |
| return (0); |
| if ((uint32_t)location != archive_be32dec(h + 76)) |
| return (0); |
| |
| return (1); |
| } |
| |
| static int |
| isVDSetTerminator(struct iso9660 *iso9660, const unsigned char *h) |
| { |
| (void)iso9660; /* UNUSED */ |
| |
| /* Type of the Volume Descriptor Set Terminator must be 255. */ |
| if (h[0] != 255) |
| return (0); |
| |
| /* Volume Descriptor Version must be 1. */ |
| if (h[6] != 1) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, 7, 2048-7)) |
| return (0); |
| |
| return (1); |
| } |
| |
| static int |
| isJolietSVD(struct iso9660 *iso9660, const unsigned char *h) |
| { |
| const unsigned char *p; |
| ssize_t logical_block_size; |
| int32_t volume_block; |
| |
| /* Check if current sector is a kind of Supplementary Volume |
| * Descriptor. */ |
| if (!isSVD(iso9660, h)) |
| return (0); |
| |
| /* FIXME: do more validations according to joliet spec. */ |
| |
| /* check if this SVD contains joliet extension! */ |
| p = h + SVD_escape_sequences_offset; |
| /* N.B. Joliet spec says p[1] == '\\', but.... */ |
| if (p[0] == '%' && p[1] == '/') { |
| int level = 0; |
| |
| if (p[2] == '@') |
| level = 1; |
| else if (p[2] == 'C') |
| level = 2; |
| else if (p[2] == 'E') |
| level = 3; |
| else /* not joliet */ |
| return (0); |
| |
| iso9660->seenJoliet = level; |
| |
| } else /* not joliet */ |
| return (0); |
| |
| logical_block_size = |
| archive_le16dec(h + SVD_logical_block_size_offset); |
| volume_block = archive_le32dec(h + SVD_volume_space_size_offset); |
| |
| iso9660->logical_block_size = logical_block_size; |
| iso9660->volume_block = volume_block; |
| iso9660->volume_size = logical_block_size * (uint64_t)volume_block; |
| /* Read Root Directory Record in Volume Descriptor. */ |
| p = h + SVD_root_directory_record_offset; |
| iso9660->joliet.location = archive_le32dec(p + DR_extent_offset); |
| iso9660->joliet.size = archive_le32dec(p + DR_size_offset); |
| |
| return (48); |
| } |
| |
| static int |
| isSVD(struct iso9660 *iso9660, const unsigned char *h) |
| { |
| const unsigned char *p; |
| ssize_t logical_block_size; |
| int32_t volume_block; |
| int32_t location; |
| |
| (void)iso9660; /* UNUSED */ |
| |
| /* Type 2 means it's a SVD. */ |
| if (h[SVD_type_offset] != 2) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, SVD_reserved1_offset, SVD_reserved1_size)) |
| return (0); |
| if (!isNull(iso9660, h, SVD_reserved2_offset, SVD_reserved2_size)) |
| return (0); |
| if (!isNull(iso9660, h, SVD_reserved3_offset, SVD_reserved3_size)) |
| return (0); |
| |
| /* File structure version must be 1 for ISO9660/ECMA119. */ |
| if (h[SVD_file_structure_version_offset] != 1) |
| return (0); |
| |
| logical_block_size = |
| archive_le16dec(h + SVD_logical_block_size_offset); |
| if (logical_block_size <= 0) |
| return (0); |
| |
| volume_block = archive_le32dec(h + SVD_volume_space_size_offset); |
| if (volume_block <= SYSTEM_AREA_BLOCK+4) |
| return (0); |
| |
| /* Location of Occurrence of Type L Path Table must be |
| * available location, |
| * >= SYSTEM_AREA_BLOCK(16) + 2 and < Volume Space Size. */ |
| location = archive_le32dec(h+SVD_type_L_path_table_offset); |
| if (location < SYSTEM_AREA_BLOCK+2 || location >= volume_block) |
| return (0); |
| |
| /* The Type M Path Table must be at a valid location (WinISO |
| * and probably other programs omit this, so we allow zero) |
| * |
| * >= SYSTEM_AREA_BLOCK(16) + 2 and < Volume Space Size. */ |
| location = archive_be32dec(h+SVD_type_M_path_table_offset); |
| if ((location > 0 && location < SYSTEM_AREA_BLOCK+2) |
| || location >= volume_block) |
| return (0); |
| |
| /* Read Root Directory Record in Volume Descriptor. */ |
| p = h + SVD_root_directory_record_offset; |
| if (p[DR_length_offset] != 34) |
| return (0); |
| |
| return (48); |
| } |
| |
| static int |
| isEVD(struct iso9660 *iso9660, const unsigned char *h) |
| { |
| const unsigned char *p; |
| ssize_t logical_block_size; |
| int32_t volume_block; |
| int32_t location; |
| |
| (void)iso9660; /* UNUSED */ |
| |
| /* Type of the Enhanced Volume Descriptor must be 2. */ |
| if (h[PVD_type_offset] != 2) |
| return (0); |
| |
| /* EVD version must be 2. */ |
| if (h[PVD_version_offset] != 2) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (h[PVD_reserved1_offset] != 0) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, PVD_reserved2_offset, PVD_reserved2_size)) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, PVD_reserved3_offset, PVD_reserved3_size)) |
| return (0); |
| |
| /* Logical block size must be > 0. */ |
| /* I've looked at Ecma 119 and can't find any stronger |
| * restriction on this field. */ |
| logical_block_size = |
| archive_le16dec(h + PVD_logical_block_size_offset); |
| if (logical_block_size <= 0) |
| return (0); |
| |
| volume_block = |
| archive_le32dec(h + PVD_volume_space_size_offset); |
| if (volume_block <= SYSTEM_AREA_BLOCK+4) |
| return (0); |
| |
| /* File structure version must be 2 for ISO9660:1999. */ |
| if (h[PVD_file_structure_version_offset] != 2) |
| return (0); |
| |
| /* Location of Occurrence of Type L Path Table must be |
| * available location, |
| * >= SYSTEM_AREA_BLOCK(16) + 2 and < Volume Space Size. */ |
| location = archive_le32dec(h+PVD_type_1_path_table_offset); |
| if (location < SYSTEM_AREA_BLOCK+2 || location >= volume_block) |
| return (0); |
| |
| /* Location of Occurrence of Type M Path Table must be |
| * available location, |
| * >= SYSTEM_AREA_BLOCK(16) + 2 and < Volume Space Size. */ |
| location = archive_be32dec(h+PVD_type_m_path_table_offset); |
| if ((location > 0 && location < SYSTEM_AREA_BLOCK+2) |
| || location >= volume_block) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, PVD_reserved4_offset, PVD_reserved4_size)) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, PVD_reserved5_offset, PVD_reserved5_size)) |
| return (0); |
| |
| /* Read Root Directory Record in Volume Descriptor. */ |
| p = h + PVD_root_directory_record_offset; |
| if (p[DR_length_offset] != 34) |
| return (0); |
| |
| return (48); |
| } |
| |
| static int |
| isPVD(struct iso9660 *iso9660, const unsigned char *h) |
| { |
| const unsigned char *p; |
| ssize_t logical_block_size; |
| int32_t volume_block; |
| int32_t location; |
| int i; |
| |
| /* Type of the Primary Volume Descriptor must be 1. */ |
| if (h[PVD_type_offset] != 1) |
| return (0); |
| |
| /* PVD version must be 1. */ |
| if (h[PVD_version_offset] != 1) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (h[PVD_reserved1_offset] != 0) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, PVD_reserved2_offset, PVD_reserved2_size)) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, PVD_reserved3_offset, PVD_reserved3_size)) |
| return (0); |
| |
| /* Logical block size must be > 0. */ |
| /* I've looked at Ecma 119 and can't find any stronger |
| * restriction on this field. */ |
| logical_block_size = |
| archive_le16dec(h + PVD_logical_block_size_offset); |
| if (logical_block_size <= 0) |
| return (0); |
| |
| volume_block = archive_le32dec(h + PVD_volume_space_size_offset); |
| if (volume_block <= SYSTEM_AREA_BLOCK+4) |
| return (0); |
| |
| /* File structure version must be 1 for ISO9660/ECMA119. */ |
| if (h[PVD_file_structure_version_offset] != 1) |
| return (0); |
| |
| /* Location of Occurrence of Type L Path Table must be |
| * available location, |
| * > SYSTEM_AREA_BLOCK(16) + 2 and < Volume Space Size. */ |
| location = archive_le32dec(h+PVD_type_1_path_table_offset); |
| if (location < SYSTEM_AREA_BLOCK+2 || location >= volume_block) |
| return (0); |
| |
| /* The Type M Path Table must also be at a valid location |
| * (although ECMA 119 requires a Type M Path Table, WinISO and |
| * probably other programs omit it, so we permit a zero here) |
| * |
| * >= SYSTEM_AREA_BLOCK(16) + 2 and < Volume Space Size. */ |
| location = archive_be32dec(h+PVD_type_m_path_table_offset); |
| if ((location > 0 && location < SYSTEM_AREA_BLOCK+2) |
| || location >= volume_block) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| /* But accept NetBSD/FreeBSD "makefs" images with 0x20 here. */ |
| for (i = 0; i < PVD_reserved4_size; ++i) |
| if (h[PVD_reserved4_offset + i] != 0 |
| && h[PVD_reserved4_offset + i] != 0x20) |
| return (0); |
| |
| /* Reserved field must be 0. */ |
| if (!isNull(iso9660, h, PVD_reserved5_offset, PVD_reserved5_size)) |
| return (0); |
| |
| /* XXX TODO: Check other values for sanity; reject more |
| * malformed PVDs. XXX */ |
| |
| /* Read Root Directory Record in Volume Descriptor. */ |
| p = h + PVD_root_directory_record_offset; |
| if (p[DR_length_offset] != 34) |
| return (0); |
| |
| if (!iso9660->primary.location) { |
| iso9660->logical_block_size = logical_block_size; |
| iso9660->volume_block = volume_block; |
| iso9660->volume_size = |
| logical_block_size * (uint64_t)volume_block; |
| iso9660->primary.location = |
| archive_le32dec(p + DR_extent_offset); |
| iso9660->primary.size = archive_le32dec(p + DR_size_offset); |
| } |
| |
| return (48); |
| } |
| |
| static int |
| read_children(struct archive_read *a, struct file_info *parent) |
| { |
| struct iso9660 *iso9660; |
| const unsigned char *b, *p; |
| struct file_info *multi; |
| size_t step, skip_size; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| /* flush any remaining bytes from the last round to ensure |
| * we're positioned */ |
| if (iso9660->entry_bytes_unconsumed) { |
| __archive_read_consume(a, iso9660->entry_bytes_unconsumed); |
| iso9660->entry_bytes_unconsumed = 0; |
| } |
| if (iso9660->current_position > parent->offset) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Ignoring out-of-order directory (%s) %jd > %jd", |
| parent->name.s, |
| (intmax_t)iso9660->current_position, |
| (intmax_t)parent->offset); |
| return (ARCHIVE_WARN); |
| } |
| if (parent->offset + parent->size > iso9660->volume_size) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Directory is beyond end-of-media: %s", |
| parent->name.s); |
| return (ARCHIVE_WARN); |
| } |
| if (iso9660->current_position < parent->offset) { |
| int64_t skipsize; |
| |
| skipsize = parent->offset - iso9660->current_position; |
| skipsize = __archive_read_consume(a, skipsize); |
| if (skipsize < 0) |
| return ((int)skipsize); |
| iso9660->current_position = parent->offset; |
| } |
| |
| step = (size_t)(((parent->size + iso9660->logical_block_size -1) / |
| iso9660->logical_block_size) * iso9660->logical_block_size); |
| b = __archive_read_ahead(a, step, NULL); |
| if (b == NULL) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Failed to read full block when scanning " |
| "ISO9660 directory list"); |
| return (ARCHIVE_FATAL); |
| } |
| iso9660->current_position += step; |
| multi = NULL; |
| skip_size = step; |
| while (step) { |
| p = b; |
| b += iso9660->logical_block_size; |
| step -= iso9660->logical_block_size; |
| for (; *p != 0 && p < b && p + *p <= b; p += *p) { |
| struct file_info *child; |
| |
| /* N.B.: these special directory identifiers |
| * are 8 bit "values" even on a |
| * Joliet CD with UCS-2 (16bit) encoding. |
| */ |
| |
| /* Skip '.' entry. */ |
| if (*(p + DR_name_len_offset) == 1 |
| && *(p + DR_name_offset) == '\0') |
| continue; |
| /* Skip '..' entry. */ |
| if (*(p + DR_name_len_offset) == 1 |
| && *(p + DR_name_offset) == '\001') |
| continue; |
| child = parse_file_info(a, parent, p); |
| if (child == NULL) { |
| __archive_read_consume(a, skip_size); |
| return (ARCHIVE_FATAL); |
| } |
| if (child->cl_offset == 0 && |
| (child->multi_extent || multi != NULL)) { |
| struct content *con; |
| |
| if (multi == NULL) { |
| multi = child; |
| multi->contents.first = NULL; |
| multi->contents.last = |
| &(multi->contents.first); |
| } |
| con = malloc(sizeof(struct content)); |
| if (con == NULL) { |
| archive_set_error( |
| &a->archive, ENOMEM, |
| "No memory for multi extent"); |
| __archive_read_consume(a, skip_size); |
| return (ARCHIVE_FATAL); |
| } |
| con->offset = child->offset; |
| con->size = child->size; |
| con->next = NULL; |
| *multi->contents.last = con; |
| multi->contents.last = &(con->next); |
| if (multi == child) { |
| if (add_entry(a, iso9660, child) |
| != ARCHIVE_OK) |
| return (ARCHIVE_FATAL); |
| } else { |
| multi->size += child->size; |
| if (!child->multi_extent) |
| multi = NULL; |
| } |
| } else |
| if (add_entry(a, iso9660, child) != ARCHIVE_OK) |
| return (ARCHIVE_FATAL); |
| } |
| } |
| |
| __archive_read_consume(a, skip_size); |
| |
| /* Read data which recorded by RRIP "CE" extension. */ |
| if (read_CE(a, iso9660) != ARCHIVE_OK) |
| return (ARCHIVE_FATAL); |
| |
| return (ARCHIVE_OK); |
| } |
| |
| static int |
| choose_volume(struct archive_read *a, struct iso9660 *iso9660) |
| { |
| struct file_info *file; |
| int64_t skipsize; |
| struct vd *vd; |
| const void *block; |
| char seenJoliet; |
| |
| vd = &(iso9660->primary); |
| if (!iso9660->opt_support_joliet) |
| iso9660->seenJoliet = 0; |
| if (iso9660->seenJoliet && |
| vd->location > iso9660->joliet.location) |
| /* This condition is unlikely; by way of caution. */ |
| vd = &(iso9660->joliet); |
| |
| skipsize = LOGICAL_BLOCK_SIZE * (int64_t)vd->location; |
| skipsize = __archive_read_consume(a, skipsize); |
| if (skipsize < 0) |
| return ((int)skipsize); |
| iso9660->current_position = skipsize; |
| |
| block = __archive_read_ahead(a, vd->size, NULL); |
| if (block == NULL) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Failed to read full block when scanning " |
| "ISO9660 directory list"); |
| return (ARCHIVE_FATAL); |
| } |
| |
| /* |
| * While reading Root Directory, flag seenJoliet must be zero to |
| * avoid converting special name 0x00(Current Directory) and |
| * next byte to UCS2. |
| */ |
| seenJoliet = iso9660->seenJoliet;/* Save flag. */ |
| iso9660->seenJoliet = 0; |
| file = parse_file_info(a, NULL, block); |
| if (file == NULL) |
| return (ARCHIVE_FATAL); |
| iso9660->seenJoliet = seenJoliet; |
| |
| /* |
| * If the iso image has both RockRidge and Joliet, we preferentially |
| * use RockRidge Extensions rather than Joliet ones. |
| */ |
| if (vd == &(iso9660->primary) && iso9660->seenRockridge |
| && iso9660->seenJoliet) |
| iso9660->seenJoliet = 0; |
| |
| if (vd == &(iso9660->primary) && !iso9660->seenRockridge |
| && iso9660->seenJoliet) { |
| /* Switch reading data from primary to joliet. */ |
| vd = &(iso9660->joliet); |
| skipsize = LOGICAL_BLOCK_SIZE * (int64_t)vd->location; |
| skipsize -= iso9660->current_position; |
| skipsize = __archive_read_consume(a, skipsize); |
| if (skipsize < 0) |
| return ((int)skipsize); |
| iso9660->current_position += skipsize; |
| |
| block = __archive_read_ahead(a, vd->size, NULL); |
| if (block == NULL) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Failed to read full block when scanning " |
| "ISO9660 directory list"); |
| return (ARCHIVE_FATAL); |
| } |
| iso9660->seenJoliet = 0; |
| file = parse_file_info(a, NULL, block); |
| if (file == NULL) |
| return (ARCHIVE_FATAL); |
| iso9660->seenJoliet = seenJoliet; |
| } |
| |
| /* Store the root directory in the pending list. */ |
| if (add_entry(a, iso9660, file) != ARCHIVE_OK) |
| return (ARCHIVE_FATAL); |
| if (iso9660->seenRockridge) { |
| a->archive.archive_format = ARCHIVE_FORMAT_ISO9660_ROCKRIDGE; |
| a->archive.archive_format_name = |
| "ISO9660 with Rockridge extensions"; |
| } |
| |
| return (ARCHIVE_OK); |
| } |
| |
| static int |
| archive_read_format_iso9660_read_header(struct archive_read *a, |
| struct archive_entry *entry) |
| { |
| struct iso9660 *iso9660; |
| struct file_info *file; |
| int r, rd_r = ARCHIVE_OK; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| |
| if (!a->archive.archive_format) { |
| a->archive.archive_format = ARCHIVE_FORMAT_ISO9660; |
| a->archive.archive_format_name = "ISO9660"; |
| } |
| |
| if (iso9660->current_position == 0) { |
| r = choose_volume(a, iso9660); |
| if (r != ARCHIVE_OK) |
| return (r); |
| } |
| |
| file = NULL;/* Eliminate a warning. */ |
| /* Get the next entry that appears after the current offset. */ |
| r = next_entry_seek(a, iso9660, &file); |
| if (r != ARCHIVE_OK) |
| return (r); |
| |
| if (iso9660->seenJoliet) { |
| /* |
| * Convert UTF-16BE of a filename to local locale MBS |
| * and store the result into a filename field. |
| */ |
| if (iso9660->sconv_utf16be == NULL) { |
| iso9660->sconv_utf16be = |
| archive_string_conversion_from_charset( |
| &(a->archive), "UTF-16BE", 1); |
| if (iso9660->sconv_utf16be == NULL) |
| /* Couldn't allocate memory */ |
| return (ARCHIVE_FATAL); |
| } |
| if (iso9660->utf16be_path == NULL) { |
| iso9660->utf16be_path = malloc(UTF16_NAME_MAX); |
| if (iso9660->utf16be_path == NULL) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory"); |
| return (ARCHIVE_FATAL); |
| } |
| } |
| if (iso9660->utf16be_previous_path == NULL) { |
| iso9660->utf16be_previous_path = malloc(UTF16_NAME_MAX); |
| if (iso9660->utf16be_previous_path == NULL) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory"); |
| return (ARCHIVE_FATAL); |
| } |
| } |
| |
| iso9660->utf16be_path_len = 0; |
| if (build_pathname_utf16be(iso9660->utf16be_path, |
| UTF16_NAME_MAX, &(iso9660->utf16be_path_len), file) != 0) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Pathname is too long"); |
| return (ARCHIVE_FATAL); |
| } |
| |
| r = archive_entry_copy_pathname_l(entry, |
| (const char *)iso9660->utf16be_path, |
| iso9660->utf16be_path_len, |
| iso9660->sconv_utf16be); |
| if (r != 0) { |
| if (errno == ENOMEM) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory for Pathname"); |
| return (ARCHIVE_FATAL); |
| } |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Pathname cannot be converted " |
| "from %s to current locale.", |
| archive_string_conversion_charset_name( |
| iso9660->sconv_utf16be)); |
| |
| rd_r = ARCHIVE_WARN; |
| } |
| } else { |
| const char *path = build_pathname(&iso9660->pathname, file, 0); |
| if (path == NULL) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Pathname is too long"); |
| return (ARCHIVE_FATAL); |
| } else { |
| archive_string_empty(&iso9660->pathname); |
| archive_entry_set_pathname(entry, path); |
| } |
| } |
| |
| iso9660->entry_bytes_remaining = file->size; |
| /* Offset for sparse-file-aware clients. */ |
| iso9660->entry_sparse_offset = 0; |
| |
| if (file->offset + file->size > iso9660->volume_size) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "File is beyond end-of-media: %s", |
| archive_entry_pathname(entry)); |
| iso9660->entry_bytes_remaining = 0; |
| return (ARCHIVE_WARN); |
| } |
| |
| /* Set up the entry structure with information about this entry. */ |
| archive_entry_set_mode(entry, file->mode); |
| archive_entry_set_uid(entry, file->uid); |
| archive_entry_set_gid(entry, file->gid); |
| archive_entry_set_nlink(entry, file->nlinks); |
| if (file->birthtime_is_set) |
| archive_entry_set_birthtime(entry, file->birthtime, 0); |
| else |
| archive_entry_unset_birthtime(entry); |
| archive_entry_set_mtime(entry, file->mtime, 0); |
| archive_entry_set_ctime(entry, file->ctime, 0); |
| archive_entry_set_atime(entry, file->atime, 0); |
| /* N.B.: Rock Ridge supports 64-bit device numbers. */ |
| archive_entry_set_rdev(entry, (dev_t)file->rdev); |
| archive_entry_set_size(entry, iso9660->entry_bytes_remaining); |
| if (file->symlink.s != NULL) |
| archive_entry_copy_symlink(entry, file->symlink.s); |
| |
| /* Note: If the input isn't seekable, we can't rewind to |
| * return the same body again, so if the next entry refers to |
| * the same data, we have to return it as a hardlink to the |
| * original entry. */ |
| if (file->number != -1 && |
| file->number == iso9660->previous_number) { |
| if (iso9660->seenJoliet) { |
| r = archive_entry_copy_hardlink_l(entry, |
| (const char *)iso9660->utf16be_previous_path, |
| iso9660->utf16be_previous_path_len, |
| iso9660->sconv_utf16be); |
| if (r != 0) { |
| if (errno == ENOMEM) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory for Linkname"); |
| return (ARCHIVE_FATAL); |
| } |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Linkname cannot be converted " |
| "from %s to current locale.", |
| archive_string_conversion_charset_name( |
| iso9660->sconv_utf16be)); |
| rd_r = ARCHIVE_WARN; |
| } |
| } else |
| archive_entry_set_hardlink(entry, |
| iso9660->previous_pathname.s); |
| archive_entry_unset_size(entry); |
| iso9660->entry_bytes_remaining = 0; |
| return (rd_r); |
| } |
| |
| if ((file->mode & AE_IFMT) != AE_IFDIR && |
| file->offset < iso9660->current_position) { |
| int64_t r64; |
| |
| r64 = __archive_read_seek(a, file->offset, SEEK_SET); |
| if (r64 != (int64_t)file->offset) { |
| /* We can't seek backwards to extract it, so issue |
| * a warning. Note that this can only happen if |
| * this entry was added to the heap after we passed |
| * this offset, that is, only if the directory |
| * mentioning this entry is later than the body of |
| * the entry. Such layouts are very unusual; most |
| * ISO9660 writers lay out and record all directory |
| * information first, then store all file bodies. */ |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Ignoring out-of-order file @%jx (%s) %jd < %jd", |
| (intmax_t)file->number, |
| iso9660->pathname.s, |
| (intmax_t)file->offset, |
| (intmax_t)iso9660->current_position); |
| iso9660->entry_bytes_remaining = 0; |
| return (ARCHIVE_WARN); |
| } |
| iso9660->current_position = (uint64_t)r64; |
| } |
| |
| /* Initialize zisofs variables. */ |
| iso9660->entry_zisofs.pz = file->pz; |
| if (file->pz) { |
| #ifdef HAVE_ZLIB_H |
| struct zisofs *zisofs; |
| |
| zisofs = &iso9660->entry_zisofs; |
| zisofs->initialized = 0; |
| zisofs->pz_log2_bs = file->pz_log2_bs; |
| zisofs->pz_uncompressed_size = file->pz_uncompressed_size; |
| zisofs->pz_offset = 0; |
| zisofs->header_avail = 0; |
| zisofs->header_passed = 0; |
| zisofs->block_pointers_avail = 0; |
| #endif |
| archive_entry_set_size(entry, file->pz_uncompressed_size); |
| } |
| |
| iso9660->previous_number = file->number; |
| if (iso9660->seenJoliet) { |
| memcpy(iso9660->utf16be_previous_path, iso9660->utf16be_path, |
| iso9660->utf16be_path_len); |
| iso9660->utf16be_previous_path_len = iso9660->utf16be_path_len; |
| } else |
| archive_strcpy( |
| &iso9660->previous_pathname, iso9660->pathname.s); |
| |
| /* Reset entry_bytes_remaining if the file is multi extent. */ |
| iso9660->entry_content = file->contents.first; |
| if (iso9660->entry_content != NULL) |
| iso9660->entry_bytes_remaining = iso9660->entry_content->size; |
| |
| if (archive_entry_filetype(entry) == AE_IFDIR) { |
| /* Overwrite nlinks by proper link number which is |
| * calculated from number of sub directories. */ |
| archive_entry_set_nlink(entry, 2 + file->subdirs); |
| /* Directory data has been read completely. */ |
| iso9660->entry_bytes_remaining = 0; |
| } |
| |
| if (rd_r != ARCHIVE_OK) |
| return (rd_r); |
| return (ARCHIVE_OK); |
| } |
| |
| static int |
| archive_read_format_iso9660_read_data_skip(struct archive_read *a) |
| { |
| /* Because read_next_header always does an explicit skip |
| * to the next entry, we don't need to do anything here. */ |
| (void)a; /* UNUSED */ |
| return (ARCHIVE_OK); |
| } |
| |
| #ifdef HAVE_ZLIB_H |
| |
| static int |
| zisofs_read_data(struct archive_read *a, |
| const void **buff, size_t *size, int64_t *offset) |
| { |
| struct iso9660 *iso9660; |
| struct zisofs *zisofs; |
| const unsigned char *p; |
| size_t avail; |
| ssize_t bytes_read; |
| size_t uncompressed_size; |
| int r; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| zisofs = &iso9660->entry_zisofs; |
| |
| p = __archive_read_ahead(a, 1, &bytes_read); |
| if (bytes_read <= 0) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_FILE_FORMAT, |
| "Truncated zisofs file body"); |
| return (ARCHIVE_FATAL); |
| } |
| if (bytes_read > iso9660->entry_bytes_remaining) |
| bytes_read = (ssize_t)iso9660->entry_bytes_remaining; |
| avail = bytes_read; |
| uncompressed_size = 0; |
| |
| if (!zisofs->initialized) { |
| size_t ceil, xsize; |
| |
| /* Allocate block pointers buffer. */ |
| ceil = (size_t)((zisofs->pz_uncompressed_size + |
| (((int64_t)1) << zisofs->pz_log2_bs) - 1) |
| >> zisofs->pz_log2_bs); |
| xsize = (ceil + 1) * 4; |
| if (zisofs->block_pointers_alloc < xsize) { |
| size_t alloc; |
| |
| if (zisofs->block_pointers != NULL) |
| free(zisofs->block_pointers); |
| alloc = ((xsize >> 10) + 1) << 10; |
| zisofs->block_pointers = malloc(alloc); |
| if (zisofs->block_pointers == NULL) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory for zisofs decompression"); |
| return (ARCHIVE_FATAL); |
| } |
| zisofs->block_pointers_alloc = alloc; |
| } |
| zisofs->block_pointers_size = xsize; |
| |
| /* Allocate uncompressed data buffer. */ |
| xsize = (size_t)1UL << zisofs->pz_log2_bs; |
| if (zisofs->uncompressed_buffer_size < xsize) { |
| if (zisofs->uncompressed_buffer != NULL) |
| free(zisofs->uncompressed_buffer); |
| zisofs->uncompressed_buffer = malloc(xsize); |
| if (zisofs->uncompressed_buffer == NULL) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory for zisofs decompression"); |
| return (ARCHIVE_FATAL); |
| } |
| } |
| zisofs->uncompressed_buffer_size = xsize; |
| |
| /* |
| * Read the file header, and check the magic code of zisofs. |
| */ |
| if (zisofs->header_avail < sizeof(zisofs->header)) { |
| xsize = sizeof(zisofs->header) - zisofs->header_avail; |
| if (avail < xsize) |
| xsize = avail; |
| memcpy(zisofs->header + zisofs->header_avail, p, xsize); |
| zisofs->header_avail += xsize; |
| avail -= xsize; |
| p += xsize; |
| } |
| if (!zisofs->header_passed && |
| zisofs->header_avail == sizeof(zisofs->header)) { |
| int err = 0; |
| |
| if (memcmp(zisofs->header, zisofs_magic, |
| sizeof(zisofs_magic)) != 0) |
| err = 1; |
| if (archive_le32dec(zisofs->header + 8) |
| != zisofs->pz_uncompressed_size) |
| err = 1; |
| if (zisofs->header[12] != 4) |
| err = 1; |
| if (zisofs->header[13] != zisofs->pz_log2_bs) |
| err = 1; |
| if (err) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Illegal zisofs file body"); |
| return (ARCHIVE_FATAL); |
| } |
| zisofs->header_passed = 1; |
| } |
| /* |
| * Read block pointers. |
| */ |
| if (zisofs->header_passed && |
| zisofs->block_pointers_avail < zisofs->block_pointers_size) { |
| xsize = zisofs->block_pointers_size |
| - zisofs->block_pointers_avail; |
| if (avail < xsize) |
| xsize = avail; |
| memcpy(zisofs->block_pointers |
| + zisofs->block_pointers_avail, p, xsize); |
| zisofs->block_pointers_avail += xsize; |
| avail -= xsize; |
| p += xsize; |
| if (zisofs->block_pointers_avail |
| == zisofs->block_pointers_size) { |
| /* We've got all block pointers and initialize |
| * related variables. */ |
| zisofs->block_off = 0; |
| zisofs->block_avail = 0; |
| /* Complete a initialization */ |
| zisofs->initialized = 1; |
| } |
| } |
| |
| if (!zisofs->initialized) |
| goto next_data; /* We need more data. */ |
| } |
| |
| /* |
| * Get block offsets from block pointers. |
| */ |
| if (zisofs->block_avail == 0) { |
| uint32_t bst, bed; |
| |
| if (zisofs->block_off + 4 >= zisofs->block_pointers_size) { |
| /* There isn't a pair of offsets. */ |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Illegal zisofs block pointers"); |
| return (ARCHIVE_FATAL); |
| } |
| bst = archive_le32dec( |
| zisofs->block_pointers + zisofs->block_off); |
| if (bst != zisofs->pz_offset + (bytes_read - avail)) { |
| /* TODO: Should we seek offset of current file |
| * by bst ? */ |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Illegal zisofs block pointers(cannot seek)"); |
| return (ARCHIVE_FATAL); |
| } |
| bed = archive_le32dec( |
| zisofs->block_pointers + zisofs->block_off + 4); |
| if (bed < bst) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Illegal zisofs block pointers"); |
| return (ARCHIVE_FATAL); |
| } |
| zisofs->block_avail = bed - bst; |
| zisofs->block_off += 4; |
| |
| /* Initialize compression library for new block. */ |
| if (zisofs->stream_valid) |
| r = inflateReset(&zisofs->stream); |
| else |
| r = inflateInit(&zisofs->stream); |
| if (r != Z_OK) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Can't initialize zisofs decompression."); |
| return (ARCHIVE_FATAL); |
| } |
| zisofs->stream_valid = 1; |
| zisofs->stream.total_in = 0; |
| zisofs->stream.total_out = 0; |
| } |
| |
| /* |
| * Make uncompressed data. |
| */ |
| if (zisofs->block_avail == 0) { |
| memset(zisofs->uncompressed_buffer, 0, |
| zisofs->uncompressed_buffer_size); |
| uncompressed_size = zisofs->uncompressed_buffer_size; |
| } else { |
| zisofs->stream.next_in = (Bytef *)(uintptr_t)(const void *)p; |
| if (avail > zisofs->block_avail) |
| zisofs->stream.avail_in = zisofs->block_avail; |
| else |
| zisofs->stream.avail_in = (uInt)avail; |
| zisofs->stream.next_out = zisofs->uncompressed_buffer; |
| zisofs->stream.avail_out = |
| (uInt)zisofs->uncompressed_buffer_size; |
| |
| r = inflate(&zisofs->stream, 0); |
| switch (r) { |
| case Z_OK: /* Decompressor made some progress.*/ |
| case Z_STREAM_END: /* Found end of stream. */ |
| break; |
| default: |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "zisofs decompression failed (%d)", r); |
| return (ARCHIVE_FATAL); |
| } |
| uncompressed_size = |
| zisofs->uncompressed_buffer_size - zisofs->stream.avail_out; |
| avail -= zisofs->stream.next_in - p; |
| zisofs->block_avail -= (uint32_t)(zisofs->stream.next_in - p); |
| } |
| next_data: |
| bytes_read -= avail; |
| *buff = zisofs->uncompressed_buffer; |
| *size = uncompressed_size; |
| *offset = iso9660->entry_sparse_offset; |
| iso9660->entry_sparse_offset += uncompressed_size; |
| iso9660->entry_bytes_remaining -= bytes_read; |
| iso9660->current_position += bytes_read; |
| zisofs->pz_offset += (uint32_t)bytes_read; |
| iso9660->entry_bytes_unconsumed += bytes_read; |
| |
| return (ARCHIVE_OK); |
| } |
| |
| #else /* HAVE_ZLIB_H */ |
| |
| static int |
| zisofs_read_data(struct archive_read *a, |
| const void **buff, size_t *size, int64_t *offset) |
| { |
| |
| (void)buff;/* UNUSED */ |
| (void)size;/* UNUSED */ |
| (void)offset;/* UNUSED */ |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_FILE_FORMAT, |
| "zisofs is not supported on this platform."); |
| return (ARCHIVE_FAILED); |
| } |
| |
| #endif /* HAVE_ZLIB_H */ |
| |
| static int |
| archive_read_format_iso9660_read_data(struct archive_read *a, |
| const void **buff, size_t *size, int64_t *offset) |
| { |
| ssize_t bytes_read; |
| struct iso9660 *iso9660; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| |
| if (iso9660->entry_bytes_unconsumed) { |
| __archive_read_consume(a, iso9660->entry_bytes_unconsumed); |
| iso9660->entry_bytes_unconsumed = 0; |
| } |
| |
| if (iso9660->entry_bytes_remaining <= 0) { |
| if (iso9660->entry_content != NULL) |
| iso9660->entry_content = iso9660->entry_content->next; |
| if (iso9660->entry_content == NULL) { |
| *buff = NULL; |
| *size = 0; |
| *offset = iso9660->entry_sparse_offset; |
| return (ARCHIVE_EOF); |
| } |
| /* Seek forward to the start of the entry. */ |
| if (iso9660->current_position < iso9660->entry_content->offset) { |
| int64_t step; |
| |
| step = iso9660->entry_content->offset - |
| iso9660->current_position; |
| step = __archive_read_consume(a, step); |
| if (step < 0) |
| return ((int)step); |
| iso9660->current_position = |
| iso9660->entry_content->offset; |
| } |
| if (iso9660->entry_content->offset < iso9660->current_position) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Ignoring out-of-order file (%s) %jd < %jd", |
| iso9660->pathname.s, |
| (intmax_t)iso9660->entry_content->offset, |
| (intmax_t)iso9660->current_position); |
| *buff = NULL; |
| *size = 0; |
| *offset = iso9660->entry_sparse_offset; |
| return (ARCHIVE_WARN); |
| } |
| iso9660->entry_bytes_remaining = iso9660->entry_content->size; |
| } |
| if (iso9660->entry_zisofs.pz) |
| return (zisofs_read_data(a, buff, size, offset)); |
| |
| *buff = __archive_read_ahead(a, 1, &bytes_read); |
| if (bytes_read == 0) |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Truncated input file"); |
| if (*buff == NULL) |
| return (ARCHIVE_FATAL); |
| if (bytes_read > iso9660->entry_bytes_remaining) |
| bytes_read = (ssize_t)iso9660->entry_bytes_remaining; |
| *size = bytes_read; |
| *offset = iso9660->entry_sparse_offset; |
| iso9660->entry_sparse_offset += bytes_read; |
| iso9660->entry_bytes_remaining -= bytes_read; |
| iso9660->entry_bytes_unconsumed = bytes_read; |
| iso9660->current_position += bytes_read; |
| return (ARCHIVE_OK); |
| } |
| |
| static int |
| archive_read_format_iso9660_cleanup(struct archive_read *a) |
| { |
| struct iso9660 *iso9660; |
| int r = ARCHIVE_OK; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| release_files(iso9660); |
| free(iso9660->read_ce_req.reqs); |
| archive_string_free(&iso9660->pathname); |
| archive_string_free(&iso9660->previous_pathname); |
| if (iso9660->pending_files.files) |
| free(iso9660->pending_files.files); |
| #ifdef HAVE_ZLIB_H |
| free(iso9660->entry_zisofs.uncompressed_buffer); |
| free(iso9660->entry_zisofs.block_pointers); |
| if (iso9660->entry_zisofs.stream_valid) { |
| if (inflateEnd(&iso9660->entry_zisofs.stream) != Z_OK) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Failed to clean up zlib decompressor"); |
| r = ARCHIVE_FATAL; |
| } |
| } |
| #endif |
| free(iso9660->utf16be_path); |
| free(iso9660->utf16be_previous_path); |
| free(iso9660); |
| (a->format->data) = NULL; |
| return (r); |
| } |
| |
| /* |
| * This routine parses a single ISO directory record, makes sense |
| * of any extensions, and stores the result in memory. |
| */ |
| static struct file_info * |
| parse_file_info(struct archive_read *a, struct file_info *parent, |
| const unsigned char *isodirrec) |
| { |
| struct iso9660 *iso9660; |
| struct file_info *file, *filep; |
| size_t name_len; |
| const unsigned char *rr_start, *rr_end; |
| const unsigned char *p; |
| size_t dr_len; |
| uint64_t fsize, offset; |
| int32_t location; |
| int flags; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| |
| dr_len = (size_t)isodirrec[DR_length_offset]; |
| name_len = (size_t)isodirrec[DR_name_len_offset]; |
| location = archive_le32dec(isodirrec + DR_extent_offset); |
| fsize = toi(isodirrec + DR_size_offset, DR_size_size); |
| /* Sanity check that dr_len needs at least 34. */ |
| if (dr_len < 34) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Invalid length of directory record"); |
| return (NULL); |
| } |
| /* Sanity check that name_len doesn't exceed dr_len. */ |
| if (dr_len - 33 < name_len || name_len == 0) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Invalid length of file identifier"); |
| return (NULL); |
| } |
| /* Sanity check that location doesn't exceed volume block. |
| * Don't check lower limit of location; it's possibility |
| * the location has negative value when file type is symbolic |
| * link or file size is zero. As far as I know latest mkisofs |
| * do that. |
| */ |
| if (location > 0 && |
| (location + ((fsize + iso9660->logical_block_size -1) |
| / iso9660->logical_block_size)) |
| > (uint32_t)iso9660->volume_block) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Invalid location of extent of file"); |
| return (NULL); |
| } |
| /* Sanity check that location doesn't have a negative value |
| * when the file is not empty. it's too large. */ |
| if (fsize != 0 && location < 0) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Invalid location of extent of file"); |
| return (NULL); |
| } |
| |
| /* Sanity check that this entry does not create a cycle. */ |
| offset = iso9660->logical_block_size * (uint64_t)location; |
| for (filep = parent; filep != NULL; filep = filep->parent) { |
| if (filep->offset == offset) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_FILE_FORMAT, |
| "Directory structure contains loop"); |
| return (NULL); |
| } |
| } |
| |
| /* Create a new file entry and copy data from the ISO dir record. */ |
| file = (struct file_info *)calloc(1, sizeof(*file)); |
| if (file == NULL) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory for file entry"); |
| return (NULL); |
| } |
| file->parent = parent; |
| file->offset = offset; |
| file->size = fsize; |
| file->mtime = isodate7(isodirrec + DR_date_offset); |
| file->ctime = file->atime = file->mtime; |
| file->rede_files.first = NULL; |
| file->rede_files.last = &(file->rede_files.first); |
| |
| p = isodirrec + DR_name_offset; |
| /* Rockridge extensions (if any) follow name. Compute this |
| * before fidgeting the name_len below. */ |
| rr_start = p + name_len + (name_len & 1 ? 0 : 1); |
| rr_end = isodirrec + dr_len; |
| |
| if (iso9660->seenJoliet) { |
| /* Joliet names are max 64 chars (128 bytes) according to spec, |
| * but genisoimage/mkisofs allows recording longer Joliet |
| * names which are 103 UCS2 characters(206 bytes) by their |
| * option '-joliet-long'. |
| */ |
| if (name_len > 206) |
| name_len = 206; |
| name_len &= ~1; |
| |
| /* trim trailing first version and dot from filename. |
| * |
| * Remember we were in UTF-16BE land! |
| * SEPARATOR 1 (.) and SEPARATOR 2 (;) are both |
| * 16 bits big endian characters on Joliet. |
| * |
| * TODO: sanitize filename? |
| * Joliet allows any UCS-2 char except: |
| * *, /, :, ;, ? and \. |
| */ |
| /* Chop off trailing ';1' from files. */ |
| if (name_len > 4 && p[name_len-4] == 0 && p[name_len-3] == ';' |
| && p[name_len-2] == 0 && p[name_len-1] == '1') |
| name_len -= 4; |
| #if 0 /* XXX: this somehow manages to strip of single-character file extensions, like '.c'. */ |
| /* Chop off trailing '.' from filenames. */ |
| if (name_len > 2 && p[name_len-2] == 0 && p[name_len-1] == '.') |
| name_len -= 2; |
| #endif |
| if ((file->utf16be_name = malloc(name_len)) == NULL) { |
| archive_set_error(&a->archive, ENOMEM, |
| "No memory for file name"); |
| goto fail; |
| } |
| memcpy(file->utf16be_name, p, name_len); |
| file->utf16be_bytes = name_len; |
| } else { |
| /* Chop off trailing ';1' from files. */ |
| if (name_len > 2 && p[name_len - 2] == ';' && |
| p[name_len - 1] == '1') |
| name_len -= 2; |
| /* Chop off trailing '.' from filenames. */ |
| if (name_len > 1 && p[name_len - 1] == '.') |
| --name_len; |
| |
| archive_strncpy(&file->name, (const char *)p, name_len); |
| } |
| |
| flags = isodirrec[DR_flags_offset]; |
| if (flags & 0x02) |
| file->mode = AE_IFDIR | 0700; |
| else |
| file->mode = AE_IFREG | 0400; |
| if (flags & 0x80) |
| file->multi_extent = 1; |
| else |
| file->multi_extent = 0; |
| /* |
| * Use a location for the file number, which is treated as an inode |
| * number to find out hardlink target. If Rockridge extensions is |
| * being used, the file number will be overwritten by FILE SERIAL |
| * NUMBER of RRIP "PX" extension. |
| * Note: Old mkisofs did not record that FILE SERIAL NUMBER |
| * in ISO images. |
| * Note2: xorriso set 0 to the location of a symlink file. |
| */ |
| if (file->size == 0 && location >= 0) { |
| /* If file->size is zero, its location points wrong place, |
| * and so we should not use it for the file number. |
| * When the location has negative value, it can be used |
| * for the file number. |
| */ |
| file->number = -1; |
| /* Do not appear before any directory entries. */ |
| file->offset = -1; |
| } else |
| file->number = (int64_t)(uint32_t)location; |
| |
| /* Rockridge extensions overwrite information from above. */ |
| if (iso9660->opt_support_rockridge) { |
| if (parent == NULL && rr_end - rr_start >= 7) { |
| p = rr_start; |
| if (memcmp(p, "SP\x07\x01\xbe\xef", 6) == 0) { |
| /* |
| * SP extension stores the suspOffset |
| * (Number of bytes to skip between |
| * filename and SUSP records.) |
| * It is mandatory by the SUSP standard |
| * (IEEE 1281). |
| * |
| * It allows SUSP to coexist with |
| * non-SUSP uses of the System |
| * Use Area by placing non-SUSP data |
| * before SUSP data. |
| * |
| * SP extension must be in the root |
| * directory entry, disable all SUSP |
| * processing if not found. |
| */ |
| iso9660->suspOffset = p[6]; |
| iso9660->seenSUSP = 1; |
| rr_start += 7; |
| } |
| } |
| if (iso9660->seenSUSP) { |
| int r; |
| |
| file->name_continues = 0; |
| file->symlink_continues = 0; |
| rr_start += iso9660->suspOffset; |
| r = parse_rockridge(a, file, rr_start, rr_end); |
| if (r != ARCHIVE_OK) |
| goto fail; |
| /* |
| * A file size of symbolic link files in ISO images |
| * made by makefs is not zero and its location is |
| * the same as those of next regular file. That is |
| * the same as hard like file and it causes unexpected |
| * error. |
| */ |
| if (file->size > 0 && |
| (file->mode & AE_IFMT) == AE_IFLNK) { |
| file->size = 0; |
| file->number = -1; |
| file->offset = -1; |
| } |
| } else |
| /* If there isn't SUSP, disable parsing |
| * rock ridge extensions. */ |
| iso9660->opt_support_rockridge = 0; |
| } |
| |
| file->nlinks = 1;/* Reset nlink. we'll calculate it later. */ |
| /* Tell file's parent how many children that parent has. */ |
| if (parent != NULL && (flags & 0x02)) |
| parent->subdirs++; |
| |
| if (iso9660->seenRockridge) { |
| if (parent != NULL && parent->parent == NULL && |
| (flags & 0x02) && iso9660->rr_moved == NULL && |
| file->name.s && |
| (strcmp(file->name.s, "rr_moved") == 0 || |
| strcmp(file->name.s, ".rr_moved") == 0)) { |
| iso9660->rr_moved = file; |
| file->rr_moved = 1; |
| file->rr_moved_has_re_only = 1; |
| file->re = 0; |
| parent->subdirs--; |
| } else if (file->re) { |
| /* |
| * Sanity check: file's parent is rr_moved. |
| */ |
| if (parent == NULL || parent->rr_moved == 0) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Invalid Rockridge RE"); |
| goto fail; |
| } |
| /* |
| * Sanity check: file does not have "CL" extension. |
| */ |
| if (file->cl_offset) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Invalid Rockridge RE and CL"); |
| goto fail; |
| } |
| /* |
| * Sanity check: The file type must be a directory. |
| */ |
| if ((flags & 0x02) == 0) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Invalid Rockridge RE"); |
| goto fail; |
| } |
| } else if (parent != NULL && parent->rr_moved) |
| file->rr_moved_has_re_only = 0; |
| else if (parent != NULL && (flags & 0x02) && |
| (parent->re || parent->re_descendant)) |
| file->re_descendant = 1; |
| if (file->cl_offset) { |
| struct file_info *r; |
| |
| if (parent == NULL || parent->parent == NULL) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Invalid Rockridge CL"); |
| goto fail; |
| } |
| /* |
| * Sanity check: The file type must be a regular file. |
| */ |
| if ((flags & 0x02) != 0) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Invalid Rockridge CL"); |
| goto fail; |
| } |
| parent->subdirs++; |
| /* Overwrite an offset and a number of this "CL" entry |
| * to appear before other dirs. "+1" to those is to |
| * make sure to appear after "RE" entry which this |
| * "CL" entry should be connected with. */ |
| file->offset = file->number = file->cl_offset + 1; |
| |
| /* |
| * Sanity check: cl_offset does not point at its |
| * the parents or itself. |
| */ |
| for (r = parent; r; r = r->parent) { |
| if (r->offset == file->cl_offset) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Invalid Rockridge CL"); |
| goto fail; |
| } |
| } |
| if (file->cl_offset == file->offset || |
| parent->rr_moved) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Invalid Rockridge CL"); |
| goto fail; |
| } |
| } |
| } |
| |
| #if DEBUG |
| /* DEBUGGING: Warn about attributes I don't yet fully support. */ |
| if ((flags & ~0x02) != 0) { |
| fprintf(stderr, "\n ** Unrecognized flag: "); |
| dump_isodirrec(stderr, isodirrec); |
| fprintf(stderr, "\n"); |
| } else if (toi(isodirrec + DR_volume_sequence_number_offset, 2) != 1) { |
| fprintf(stderr, "\n ** Unrecognized sequence number: "); |
| dump_isodirrec(stderr, isodirrec); |
| fprintf(stderr, "\n"); |
| } else if (*(isodirrec + DR_file_unit_size_offset) != 0) { |
| fprintf(stderr, "\n ** Unexpected file unit size: "); |
| dump_isodirrec(stderr, isodirrec); |
| fprintf(stderr, "\n"); |
| } else if (*(isodirrec + DR_interleave_offset) != 0) { |
| fprintf(stderr, "\n ** Unexpected interleave: "); |
| dump_isodirrec(stderr, isodirrec); |
| fprintf(stderr, "\n"); |
| } else if (*(isodirrec + DR_ext_attr_length_offset) != 0) { |
| fprintf(stderr, "\n ** Unexpected extended attribute length: "); |
| dump_isodirrec(stderr, isodirrec); |
| fprintf(stderr, "\n"); |
| } |
| #endif |
| register_file(iso9660, file); |
| return (file); |
| fail: |
| archive_string_free(&file->name); |
| free(file); |
| return (NULL); |
| } |
| |
| static int |
| parse_rockridge(struct archive_read *a, struct file_info *file, |
| const unsigned char *p, const unsigned char *end) |
| { |
| struct iso9660 *iso9660; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| |
| while (p + 4 <= end /* Enough space for another entry. */ |
| && p[0] >= 'A' && p[0] <= 'Z' /* Sanity-check 1st char of name. */ |
| && p[1] >= 'A' && p[1] <= 'Z' /* Sanity-check 2nd char of name. */ |
| && p[2] >= 4 /* Sanity-check length. */ |
| && p + p[2] <= end) { /* Sanity-check length. */ |
| const unsigned char *data = p + 4; |
| int data_length = p[2] - 4; |
| int version = p[3]; |
| |
| switch(p[0]) { |
| case 'C': |
| if (p[1] == 'E') { |
| if (version == 1 && data_length == 24) { |
| /* |
| * CE extension comprises: |
| * 8 byte sector containing extension |
| * 8 byte offset w/in above sector |
| * 8 byte length of continuation |
| */ |
| int32_t location = |
| archive_le32dec(data); |
| file->ce_offset = |
| archive_le32dec(data+8); |
| file->ce_size = |
| archive_le32dec(data+16); |
| if (register_CE(a, location, file) |
| != ARCHIVE_OK) |
| return (ARCHIVE_FATAL); |
| } |
| } |
| else if (p[1] == 'L') { |
| if (version == 1 && data_length == 8) { |
| file->cl_offset = (uint64_t) |
| iso9660->logical_block_size * |
| (uint64_t)archive_le32dec(data); |
| iso9660->seenRockridge = 1; |
| } |
| } |
| break; |
| case 'N': |
| if (p[1] == 'M') { |
| if (version == 1) { |
| parse_rockridge_NM1(file, |
| data, data_length); |
| iso9660->seenRockridge = 1; |
| } |
| } |
| break; |
| case 'P': |
| /* |
| * PD extension is padding; |
| * contents are always ignored. |
| * |
| * PL extension won't appear; |
| * contents are always ignored. |
| */ |
| if (p[1] == 'N') { |
| if (version == 1 && data_length == 16) { |
| file->rdev = toi(data,4); |
| file->rdev <<= 32; |
| file->rdev |= toi(data + 8, 4); |
| iso9660->seenRockridge = 1; |
| } |
| } |
| else if (p[1] == 'X') { |
| /* |
| * PX extension comprises: |
| * 8 bytes for mode, |
| * 8 bytes for nlinks, |
| * 8 bytes for uid, |
| * 8 bytes for gid, |
| * 8 bytes for inode. |
| */ |
| if (version == 1) { |
| if (data_length >= 8) |
| file->mode |
| = toi(data, 4); |
| if (data_length >= 16) |
| file->nlinks |
| = toi(data + 8, 4); |
| if (data_length >= 24) |
| file->uid |
| = toi(data + 16, 4); |
| if (data_length >= 32) |
| file->gid |
| = toi(data + 24, 4); |
| if (data_length >= 40) |
| file->number |
| = toi(data + 32, 4); |
| iso9660->seenRockridge = 1; |
| } |
| } |
| break; |
| case 'R': |
| if (p[1] == 'E' && version == 1) { |
| file->re = 1; |
| iso9660->seenRockridge = 1; |
| } |
| else if (p[1] == 'R' && version == 1) { |
| /* |
| * RR extension comprises: |
| * one byte flag value |
| * This extension is obsolete, |
| * so contents are always ignored. |
| */ |
| } |
| break; |
| case 'S': |
| if (p[1] == 'L') { |
| if (version == 1) { |
| parse_rockridge_SL1(file, |
| data, data_length); |
| iso9660->seenRockridge = 1; |
| } |
| } |
| else if (p[1] == 'T' |
| && data_length == 0 && version == 1) { |
| /* |
| * ST extension marks end of this |
| * block of SUSP entries. |
| * |
| * It allows SUSP to coexist with |
| * non-SUSP uses of the System |
| * Use Area by placing non-SUSP data |
| * after SUSP data. |
| */ |
| iso9660->seenSUSP = 0; |
| iso9660->seenRockridge = 0; |
| return (ARCHIVE_OK); |
| } |
| break; |
| case 'T': |
| if (p[1] == 'F') { |
| if (version == 1) { |
| parse_rockridge_TF1(file, |
| data, data_length); |
| iso9660->seenRockridge = 1; |
| } |
| } |
| break; |
| case 'Z': |
| if (p[1] == 'F') { |
| if (version == 1) |
| parse_rockridge_ZF1(file, |
| data, data_length); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| p += p[2]; |
| } |
| return (ARCHIVE_OK); |
| } |
| |
| static int |
| register_CE(struct archive_read *a, int32_t location, |
| struct file_info *file) |
| { |
| struct iso9660 *iso9660; |
| struct read_ce_queue *heap; |
| struct read_ce_req *p; |
| uint64_t offset, parent_offset; |
| int hole, parent; |
| |
| iso9660 = (struct iso9660 *)(a->format->data); |
| offset = ((uint64_t)location) * (uint64_t)iso9660->logical_block_size; |
| if (((file->mode & AE_IFMT) == AE_IFREG && |
| offset >= file->offset) || |
| offset < iso9660->current_position || |
| (((uint64_t)file->ce_offset) + file->ce_size) |
| > (uint64_t)iso9660->logical_block_size || |
| offset + file->ce_offset + file->ce_size |
| > iso9660->volume_size) { |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Invalid parameter in SUSP \"CE\" extension"); |
| return (ARCHIVE_FATAL); |
| } |
| |
| /* Expand our CE list as necessary. */ |
| heap = &(iso9660->read_ce_req); |
| if (heap->cnt >= heap->allocated) { |
| int new_size; |
| |
| if (heap->allocated < 16) |
| new_size = 16; |
| else |
| new_size = heap->allocated * 2; |
| /* Overflow might keep us from growing the list. */ |
| if (new_size <= heap->allocated) { |
| archive_set_error(&a->archive, ENOMEM, "Out of memory"); |
| return (ARCHIVE_FATAL); |
| } |
| p = calloc(new_size, sizeof(p[0])); |
| if (p == NULL) { |
| archive_set_error(&a->archive, ENOMEM, "Out of memory"); |
| return (ARCHIVE_FATAL); |
| } |
| if (heap->reqs != NULL) { |
| memcpy(p, heap->reqs, heap->cnt * sizeof(*p)); |
| free(heap->reqs); |
| } |
| heap->reqs = p; |
| heap->allocated = new_size; |
| } |
| |
| /* |
| * Start with hole at end, walk it up tree to find insertion point. |
| */ |
| hole = heap->cnt++; |
| while (hole > 0) { |
| parent = (hole - 1)/2; |
| parent_offset = heap->reqs[parent].offset; |
| if (offset >= parent_offset) { |
| heap->reqs[hole].offset = offset; |
| heap->reqs[hole].file = file; |
| return (ARCHIVE_OK); |
| } |
| /* Move parent into hole <==> move hole up tree. */ |
| heap->reqs[hole] = heap->reqs[parent]; |
| hole = parent; |
| } |
| heap->reqs[0].offset = offset; |
| heap->reqs[0].file = file; |
| return (ARCHIVE_OK); |
| } |
| |
| static void |
| next_CE(struct read_ce_queue *heap) |
| { |
| uint64_t a_offset, b_offset, c_offset; |
| int a, b, c; |
| struct read_ce_req tmp; |
| |
| if (heap->cnt < 1) |
| return; |
| |
| /* |
| * Move the last item in the heap to the root of the tree |
| */ |
| heap->reqs[0] = heap->reqs[--(heap->cnt)]; |
| |
| /* |
| * Rebalance the heap. |
| */ |
| a = 0; /* Starting element and its offset */ |
| a_offset = heap->reqs[a].offset; |
| for (;;) { |
| b = a + a + 1; /* First child */ |
| if (b >= heap->cnt) |
| return; |
| b_offset = heap->reqs[b].offset; |
| c = b + 1; /* Use second child if it is smaller. */ |
| if (c < heap->cnt) { |
| c_offset = heap->reqs[c].offset; |
| if (c_offset < b_offset) { |
| b = c; |
| b_offset = c_offset; |
| } |
| } |
| if (a_offset <= b_offset) |
| return; |
| tmp = heap->reqs[a]; |
| heap->reqs[a] = heap->reqs[b]; |
| heap->reqs[b] = tmp; |
| a = b; |
| } |
| } |
| |
| |
| static int |
| read_CE(struct archive_read *a, struct iso9660 *iso9660) |
| { |
| struct read_ce_queue *heap; |
| const unsigned char *b, *p, *end; |
| struct file_info *file; |
| size_t step; |
| int r; |
| |
| /* Read data which RRIP "CE" extension points. */ |
| heap = &(iso9660->read_ce_req); |
| step = iso9660->logical_block_size; |
| while (heap->cnt && |
| heap->reqs[0].offset == iso9660->current_position) { |
| b = __archive_read_ahead(a, step, NULL); |
| if (b == NULL) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_MISC, |
| "Failed to read full block when scanning " |
| "ISO9660 directory list"); |
| return (ARCHIVE_FATAL); |
| } |
| do { |
| file = heap->reqs[0].file; |
| if (file->ce_offset + file->ce_size > step) { |
| archive_set_error(&a->archive, |
| ARCHIVE_ERRNO_FILE_FORMAT, |
| "Malformed CE information"); |
| return (ARCHIVE_FATAL); |
| } |
| p = b + file->ce_offset; |
| end = p + file->ce_size; |
| next_CE(heap); |
| r = parse_rockridge(a, file, p, end); |
| if (r != ARCHIVE_OK) |
| return (ARCHIVE_FATAL); |
| } while (heap->cnt && |
| heap->reqs[0].offset == iso9660->current_position); |
| /* NOTE: Do not move this consume's code to front of |
| * do-while loop. Registration of nested CE extension |
| * might cause error because of current position. */ |
| __archive_read_consume(a, step); |
| iso9660->current_position += step; |
| } |
| return (ARCHIVE_OK); |
| } |
| |
| static void |
| parse_rockridge_NM1(struct file_info *file, |
| const unsigned char *data, int data_length) |
| { |
| if (!file->name_continues) |
| archive_string_empty(&file->name); |
| file->name_continues = 0; |
| if (data_length < 1) |
| return; |
| /* |
| * NM version 1 extension comprises: |
| * 1 byte flag, value is one of: |
| * = 0: remainder is name |
| * = 1: remainder is name, next NM entry continues name |
| * = 2: "." |
| * = 4: ".." |
| * = 32: Implementation specific |
| * All other values are reserved. |
| */ |
| switch(data[0]) { |
| case 0: |
| if (data_length < 2) |
| return; |
| archive_strncat(&file->name, |
| (const char *)data + 1, data_length - 1); |
| break; |
| case 1: |
| if (data_length < 2) |
| return; |
| archive_strncat(&file->name, |
| (const char *)data + 1, data_length - 1); |
| file->name_continues = 1; |
| break; |
| case 2: |
| archive_strcat(&file->name, "."); |
| break; |
| case 4: |
| archive_strcat(&file->name, ".."); |
| break; |
| default: |
| return; |
| } |
| |
| } |
| |
| static void |
| parse_rockridge_TF1(struct file_info *file, const unsigned char *data, |
| int data_length) |
| { |
| char flag; |
| /* |
| * TF extension comprises: |
| * one byte flag |
| * create time (optional) |
| * modify time (optional) |
| * access time (optional) |
| * attribute time (optional) |
| * Time format and presence of fields |
| * is controlled by flag bits. |
| */ |
| if (data_length < 1) |
| return; |
| flag = data[0]; |
| ++data; |
| --data_length; |
| if (flag & 0x80) { |
| /* Use 17-byte time format. */ |
| if ((flag & 1) && data_length >= 17) { |
| /* Create time. */ |
| file->birthtime_is_set = 1; |
| file->birthtime = isodate17(data); |
| data += 17; |
| data_length -= 17; |
| } |
| if ((flag & 2) && data_length >= 17) { |
| /* Modify time. */ |
| file->mtime = isodate17(data); |
| data += 17; |
| data_length -= 17; |
| } |
| if ((flag & 4) && data_length >= 17) { |
| /* Access time. */ |
| file->atime = isodate17(data); |
| data += 17; |
| data_length -= 17; |
| } |
| if ((flag & 8) && data_length >= 17) { |
| /* Attribute change time. */ |
| file->ctime = isodate17(data); |
| } |
| } else { |
| /* Use 7-byte time format. */ |
| if ((flag & 1) && data_length >= 7) { |
| /* Create time. */ |
| file->birthtime_is_set = 1; |
| file->birthtime = isodate7(data); |
| data += 7; |
| data_length -= 7; |
| } |
| if ((flag & 2) && data_length >= 7) { |
| /* Modify time. */ |
| file->mtime = isodate7(data); |
| data += 7; |
| data_length -= 7; |
| } |
| if ((flag & 4) && data_length >= 7) { |
| /* Access time. */ |
| file->atime = isodate7(data); |
| data += 7; |
| data_length -= 7; |
| } |
| if ((flag & 8) && data_length >= 7) { |
| /* Attribute change time. */ |
| file->ctime = isodate7(data); |
| } |
| } |
| } |
| |
| static void |
| parse_rockridge_SL1(struct file_info *file, const unsigned char *data, |
| int data_length) |
| { |
| const char *separator = ""; |
| |
| if (!file->symlink_continues || file->symlink.length < 1) |
| archive_string_empty(&file->symlink); |
| file->symlink_continues = 0; |
| |
| /* |
| * Defined flag values: |
| * 0: This is the last SL record for this symbolic link |
| * 1: this symbolic link field continues in next SL entry |
| * All other values are reserved. |
| */ |
| if (data_length < 1) |
| return; |
| switch(*data) { |
| case 0: |
| break; |
| case 1: |
| file->symlink_continues = 1; |
| break; |
| default: |
| return; |
| } |
| ++data; /* Skip flag byte. */ |
| --data_length; |
| |
| /* |
| * SL extension body stores "components". |
| * Basically, this is a complicated way of storing |
| * a POSIX path. It also interferes with using |
| * symlinks for storing non-path data. <sigh> |
| * |
| * Each component is 2 bytes (flag and length) |
| * possibly followed by name data. |
| */ |
| while (data_length >= 2) { |
| unsigned char flag = *data++; |
| unsigned char nlen = *data++; |
| data_length -= 2; |
| |
| archive_strcat(&file->symlink, separator); |
| separator = "/"; |
| |
| switch(flag) { |
| case 0: /* Usual case, this is text. */ |
| if (data_length < nlen) |
| return; |
| archive_strncat(&file->symlink, |
| (const char *)data, nlen); |
| break; |
| case 0x01: /* Text continues in next component. */ |
| if (data_length < nlen) |
| return; |
| archive_strncat(&file->symlink, |
| (const char *)data, nlen); |
| separator = ""; |
| break; |
| case 0x02: /* Current dir. */ |
| archive_strcat(&file->symlink, "."); |
| break; |
| case 0x04: /* Parent dir. */ |
| archive_strcat(&file->symlink, ".."); |
| break; |
| case 0x08: /* Root of filesystem. */ |
| archive_strcat(&file->symlink, "/"); |
| separator = ""; |
| break; |
| case 0x10: /* Undefined (historically "volume root" */ |
| archive_string_empty(&file->symlink); |
| archive_strcat(&file->symlink, "ROOT"); |
| break; |
| case 0x20: /* Undefined (historically "hostname") */ |
| archive_strcat(&file->symlink, "hostname"); |
| break; |
| default: |
| /* TODO: issue a warning ? */ |
| return; |
| } |
| data += nlen; |
| data_length -= nlen; |
| } |
| } |
| |
| static void |
| parse_rockridge_ZF1(struct file_info *file, const unsigned char *data, |
| int data_length) |
| { |
| |
| if (data[0] == 0x70 && data[1] == 0x7a && data_length == 12) { |
| /* paged zlib */ |
| file->pz = 1; |
| file->pz_log2_bs = data[3]; |
| file->pz_uncompressed_size = archive_le32dec(&data[4]); |
| } |
| } |
| |
| static void |
| register_file(struct iso9660 *iso9660, struct file_info *file) |
| { |
| |
| file->use_next = iso9660->use_files; |
| iso9660->use_files = file; |
| } |
| |
| static void |
| release_files(struct iso9660 *iso9660) |
| { |
| struct content *con, *connext; |
| struct file_info *file; |
| |
| file = iso9660->use_files; |
| while (file != NULL) { |
| struct file_info *next = file->use_next; |
| |
| archive_string_free(&file->name); |
| archive_string_free(&file->symlink); |
| free(file->utf16be_name); |
| con = file->contents.first; |
| while (con != NULL) { |
| connext = con->next; |
| free(con); |
| con = connext; |
| } |
| free(file); |
| file = next; |
| } |
| } |
| |
| static int |
| next_entry_seek(struct archive_read *a, struct iso9660 *iso9660, |
| struct file_info **pfile) |
| { |
| struct file_info *file; |
| int r; |
| |
| r = next_cache_entry(a, iso9660, pfile); |
| if (r != ARCHIVE_OK) |
| return (r); |
| file = *pfile; |
| |
| /* Don't waste time seeking for zero-length bodies. */ |
| if (file->size == 0) |
| file->offset = iso9660->current_position; |
| |
| /* flush any remaining bytes from the last round to ensure |
| * we're positioned */ |
| if (iso9660->entry_bytes_unconsumed) { |
| __archive_read_consume(a, iso9660->entry_bytes_unconsumed); |
| iso9660->entry_bytes_unconsumed = 0; |
| } |
| |
| /* Seek forward to the start of the entry. */ |
| if (iso9660->current_position < file->offset) { |
| int64_t step; |
| |
| step = file->offset - iso9660->current_position; |
| step = __archive_read_consume(a, step); |
| if (step < 0) |
| return ((int)step); |
| iso9660->current_position = file->offset; |
| } |
| |
| /* We found body of file; handle it now. */ |
| return (ARCHIVE_OK); |
| } |
| |
| static int |
| next_cache_entry(struct archive_read *a, struct iso9660 *iso9660, |
| struct file_info **pfile) |
| { |
| struct file_info *file; |
| struct { |
| struct file_info *first; |
| struct file_info **last; |
| } empty_files; |
| int64_t number; |
| int count; |
| |
| file = cache_get_entry(iso9660); |
| if (file != NULL) { |
| *pfile = file; |
| return (ARCHIVE_OK); |
| } |
| |
| for (;;) { |
| struct file_info *re, *d; |
| |
| *pfile = file = next_entry(iso9660); |
| if (file == NULL) { |
| /* |
| * If directory entries all which are descendant of |
| * rr_moved are still remaining, expose their. |
| */ |
| if (iso9660->re_files.first != NULL && |
| iso9660->rr_moved != NULL && |
| iso9660->rr_moved->rr_moved_has_re_only) |
| /* Expose "rr_moved" entry. */ |
| cache_add_entry(iso9660, iso9660->rr_moved); |
| while ((re = re_get_entry(iso9660)) != NULL) { |
| /* Expose its descendant dirs. */ |
| while ((d = rede_get_entry(re)) != NULL) |
| cache_add_entry(iso9660, d); |
| } |
| if (iso9660->cache_files.first != NULL) |
| return (next_cache_entry(a, iso9660, pfile)); |
| return (ARCHIVE_EOF); |
| } |
| |
| if (file->cl_offset) { |
| struct file_info *first_re = NULL; |
| int nexted_re = 0; |
| |
| /* |
| * Find "RE" dir for the current file, which |
| * has "CL" flag. |
| */ |
| while ((re = re_get_entry(iso9660)) |
| != first_re) { |
| if (first_re == NULL) |
| first_re = re; |
| if (re->offset == file->cl_offset) { |
| re->parent->subdirs--; |
| re->parent = file->parent; |
| re->re = 0; |
| if (re->parent->re_descendant) { |
| nexted_re = 1; |
| re->re_descendant = 1; |
| if (rede_add_entry(re) < 0) |
| goto fatal_rr; |
| /* Move a list of descendants |
| * to a new ancestor. */ |
| while ((d = rede_get_entry( |
| re)) != NULL) |
| if (rede_add_entry(d) |
| < 0) |
| goto fatal_rr; |
| break; |
| } |
| /* Replace the current file |
| * with "RE" dir */ |
| *pfile = file = re; |
| /* Expose its descendant */ |
| while ((d = rede_get_entry( |
| file)) != NULL) |
| cache_add_entry( |
| iso9660, d); |
| break; |
| } else |
| re_add_entry(iso9660, re); |
| } |
| if (nexted_re) { |
| /* |
| * Do not expose this at this time |
| * because we have not gotten its full-path |
| * name yet. |
| */ |
| continue; |
| } |
| } else if ((file->mode & AE_IFMT) == AE_IFDIR) { |
| int r; |
| |
| /* Read file entries in this dir. */ |
| r = read_children(a, file); |
| if (r != ARCHIVE_OK) |
| return (r); |
| |
| /* |
| * Handle a special dir of Rockridge extensions, |
| * "rr_moved". |
| */ |
| if (file->rr_moved) { |
| /* |
| * If this has only the subdirectories which |
| * have "RE" flags, do not expose at this time. |
| */ |
| if (file->rr_moved_has_re_only) |
| continue; |
| /* Otherwise expose "rr_moved" entry. */ |
| } else if (file->re) { |
| /* |
| * Do not expose this at this time |
| * because we have not gotten its full-path |
| * name yet. |
| */ |
| re_add_entry(iso9660, file); |
| continue; |
| } else if (file->re_descendant) { |
| /* |
| * If the top level "RE" entry of this entry |
| * is not exposed, we, accordingly, should not |
| * expose this entry at this time because |
| * we cannot make its proper full-path name. |
| */ |
| if (rede_add_entry(file) == 0) |
| continue; |
| /* Otherwise we can expose this entry because |
| * it seems its top level "RE" has already been |
| * exposed. */ |
| } |
| } |
| break; |
| } |
| |
| if ((file->mode & AE_IFMT) != AE_IFREG || file->number == -1) |
| return (ARCHIVE_OK); |
| |
| count = 0; |
| number = file->number; |
| iso9660->cache_files.first = NULL; |
| iso9660->cache_files.last = &(iso9660->cache_files.first); |
| empty_files.first = NULL; |
| empty_files.last = &empty_files.first; |
| /* Collect files which has the same file serial number. |
| * Peek pending_files so that file which number is different |
| * is not put back. */ |
| while (iso9660->pending_files.used > 0 && |
| (iso9660->pending_files.files[0]->number == -1 || |
| iso9660->pending_files.files[0]->number == number)) { |
| if (file->number == -1) { |
| /* This file has the same offset |
| * but it's wrong offset which empty files |
| * and symlink files have. |
| * NOTE: This wrong offset was recorded by |
| * old mkisofs utility. If ISO images is |
| * created by latest mkisofs, this does not |
| * happen. |
| */ |
| file->next = NULL; |
| *empty_files.last = file; |
| empty_files.last = &(file->next); |
| } else { |
| count++; |
| cache_add_entry(iso9660, file); |
| } |
| file = next_entry(iso9660); |
| } |
| |
| if (count == 0) { |
| *pfile = file; |
| return ((file == NULL)?ARCHIVE_EOF:ARCHIVE_OK); |
| } |
| if (file->number == -1) { |
| file->next = NULL; |
| *empty_files.last = file; |
| empty_files.last = &(file->next); |
| } else { |
| count++; |
| cache_add_entry(iso9660, file); |
| } |
| |
| if (count > 1) { |
| /* The count is the same as number of hardlink, |
| * so much so that each nlinks of files in cache_file |
| * is overwritten by value of the count. |
| */ |
| for (file = iso9660->cache_files.first; |
| file != NULL; file = file->next) |
| file->nlinks = count; |
| } |
| /* If there are empty files, that files are added |
| * to the tail of the cache_files. */ |
| if (empty_files.first != NULL) { |
| *iso9660->cache_files.last = empty_files.first; |
| iso9660->cache_files.last = empty_files.last; |
| } |
| *pfile = cache_get_entry(iso9660); |
| return ((*pfile == NULL)?ARCHIVE_EOF:ARCHIVE_OK); |
| |
| fatal_rr: |
| archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC, |
| "Failed to connect 'CL' pointer to 'RE' rr_moved pointer of " |
| "Rockridge extensions: current position = %jd, CL offset = %jd", |
| (intmax_t)iso9660->current_position, (intmax_t)file->cl_offset); |
| return (ARCHIVE_FATAL); |
| } |
| |
| static inline void |
| re_add_entry(struct iso9660 *iso9660, struct file_info *file) |
| { |
| file->re_next = NULL; |
| *iso9660->re_files.last = file; |
| iso9660->re_files.last = &(file->re_next); |
| } |
| |
| static inline struct file_info * |
| re_get_entry(struct iso9660 *iso9660) |
| { |
| struct file_info *file; |
| |
| if ((file = iso9660->re_files.first) != NULL) { |
| iso9660->re_files.first = file->re_next; |
| if (iso9660->re_files.first == NULL) |
| iso9660->re_files.last = |
| &(iso9660->re_files.first); |
| } |
| return (file); |
| } |
| |
| static inline int |
| rede_add_entry(struct file_info *file) |
| { |
| struct file_info *re; |
| |
| /* |
| * Find "RE" entry. |
| */ |
| re = file->parent; |
| while (re != NULL && !re->re) |
| re = re->parent; |
| if (re == NULL) |
| return (-1); |
| |
| file->re_next = NULL; |
| *re->rede_files.last = file; |
| re->rede_files.last = &(file->re_next); |
| return (0); |
| } |
| |
| static inline struct file_info * |
| rede_get_entry(struct file_info *re) |
| { |
| struct file_info *file; |
| |
| if |