/*-
 * Copyright (c) 2003-2007 Tim Kientzle
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
#include "test.h"
__FBSDID("$FreeBSD$");

/*
 * Write a file using archive_write_data call, read the file
 * back and verify the contents.  The data written includes large
 * blocks of nulls, so it should exercise the sparsification logic
 * if ARCHIVE_EXTRACT_SPARSE is enabled.
 */
static void
verify_write_data(struct archive *a, int sparse)
{
	static const char data[]="abcdefghijklmnopqrstuvwxyz";
	struct stat st;
	struct archive_entry *ae;
	size_t buff_size = 64 * 1024;
	char *buff, *p;
	const char *msg = sparse ? "sparse" : "non-sparse";
	int fd;

	buff = malloc(buff_size);
	assert(buff != NULL);

	ae = archive_entry_new();
	assert(ae != NULL);
	archive_entry_set_size(ae, 8 * buff_size);
	archive_entry_set_pathname(ae, "test_write_data");
	archive_entry_set_mode(ae, AE_IFREG | 0755);
	assertEqualIntA(a, 0, archive_write_header(a, ae));

	/* Use archive_write_data() to write three relatively sparse blocks. */

	/* First has non-null data at beginning. */
	memset(buff, 0, buff_size);
	memcpy(buff, data, sizeof(data));
	failure("%s", msg);
	assertEqualInt(buff_size, archive_write_data(a, buff, buff_size));

	/* Second has non-null data in the middle. */
	memset(buff, 0, buff_size);
	memcpy(buff + buff_size / 2 - 3, data, sizeof(data));
	failure("%s", msg);
	assertEqualInt(buff_size, archive_write_data(a, buff, buff_size));

	/* Third has non-null data at the end. */
	memset(buff, 0, buff_size);
	memcpy(buff + buff_size - sizeof(data), data, sizeof(data));
	failure("%s", msg);
	assertEqualInt(buff_size, archive_write_data(a, buff, buff_size));

	failure("%s", msg);
	assertEqualIntA(a, 0, archive_write_finish_entry(a));

	/* Test the entry on disk. */
	assert(0 == stat(archive_entry_pathname(ae), &st));
        assertEqualInt(st.st_size, 8 * buff_size);
	fd = open(archive_entry_pathname(ae), O_RDONLY);
	if (!assert(fd >= 0))
		return;

	/* Check first block. */
	assertEqualInt(buff_size, read(fd, buff, buff_size));
	failure("%s", msg);
	assertEqualMem(buff, data, sizeof(data));
	for (p = buff + sizeof(data); p < buff + buff_size; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}

	/* Check second block. */
	assertEqualInt(buff_size, read(fd, buff, buff_size));
	for (p = buff; p < buff + buff_size; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (p == buff + buff_size / 2 - 3) {
			assertEqualMem(p, data, sizeof(data));
			p += sizeof(data);
		} else if (!assertEqualInt(0, *p))
			break;
	}

	/* Check third block. */
	assertEqualInt(buff_size, read(fd, buff, buff_size));
	for (p = buff; p < buff + buff_size - sizeof(data); ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}
	failure("%s", msg);
	assertEqualMem(buff + buff_size - sizeof(data), data, sizeof(data));

	/* XXX more XXX */

	assertEqualInt(0, close(fd));
	archive_entry_free(ae);
	free(buff);
}

/*
 * As above, but using the archive_write_data_block() call.
 */
static void
verify_write_data_block(struct archive *a, int sparse)
{
	static const char data[]="abcdefghijklmnopqrstuvwxyz";
	struct stat st;
	struct archive_entry *ae;
	size_t buff_size = 64 * 1024;
	char *buff, *p;
	const char *msg = sparse ? "sparse" : "non-sparse";
	int fd;

	buff = malloc(buff_size);
	assert(buff != NULL);

	ae = archive_entry_new();
	assert(ae != NULL);
	archive_entry_set_size(ae, 8 * buff_size);
	archive_entry_set_pathname(ae, "test_write_data_block");
	archive_entry_set_mode(ae, AE_IFREG | 0755);
	assertEqualIntA(a, 0, archive_write_header(a, ae));

	/* Use archive_write_data_block() to write three
	   relatively sparse blocks. */

	/* First has non-null data at beginning. */
	memset(buff, 0, buff_size);
	memcpy(buff, data, sizeof(data));
	failure("%s", msg);
	assertEqualInt(ARCHIVE_OK,
	    archive_write_data_block(a, buff, buff_size, 100));

	/* Second has non-null data in the middle. */
	memset(buff, 0, buff_size);
	memcpy(buff + buff_size / 2 - 3, data, sizeof(data));
	failure("%s", msg);
	assertEqualInt(ARCHIVE_OK,
	    archive_write_data_block(a, buff, buff_size, buff_size + 200));

	/* Third has non-null data at the end. */
	memset(buff, 0, buff_size);
	memcpy(buff + buff_size - sizeof(data), data, sizeof(data));
	failure("%s", msg);
	assertEqualInt(ARCHIVE_OK,
	    archive_write_data_block(a, buff, buff_size, buff_size * 2 + 300));

	failure("%s", msg);
	assertEqualIntA(a, 0, archive_write_finish_entry(a));

	/* Test the entry on disk. */
	assert(0 == stat(archive_entry_pathname(ae), &st));
        assertEqualInt(st.st_size, 8 * buff_size);
	fd = open(archive_entry_pathname(ae), O_RDONLY);
	if (!assert(fd >= 0))
		return;

	/* Check 100-byte gap at beginning */
	assertEqualInt(100, read(fd, buff, 100));
	failure("%s", msg);
	for (p = buff; p < buff + 100; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}

	/* Check first block. */
	assertEqualInt(buff_size, read(fd, buff, buff_size));
	failure("%s", msg);
	assertEqualMem(buff, data, sizeof(data));
	for (p = buff + sizeof(data); p < buff + buff_size; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}

	/* Check 100-byte gap */
	assertEqualInt(100, read(fd, buff, 100));
	failure("%s", msg);
	for (p = buff; p < buff + 100; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}

	/* Check second block. */
	assertEqualInt(buff_size, read(fd, buff, buff_size));
	for (p = buff; p < buff + buff_size; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (p == buff + buff_size / 2 - 3) {
			assertEqualMem(p, data, sizeof(data));
			p += sizeof(data);
		} else if (!assertEqualInt(0, *p))
			break;
	}

	/* Check 100-byte gap */
	assertEqualInt(100, read(fd, buff, 100));
	failure("%s", msg);
	for (p = buff; p < buff + 100; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}

	/* Check third block. */
	assertEqualInt(buff_size, read(fd, buff, buff_size));
	for (p = buff; p < buff + buff_size - sizeof(data); ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}
	failure("%s", msg);
	assertEqualMem(buff + buff_size - sizeof(data), data, sizeof(data));

	/* Check another block size beyond last we wrote. */
	assertEqualInt(buff_size, read(fd, buff, buff_size));
	failure("%s", msg);
	for (p = buff; p < buff + buff_size; ++p) {
		failure("offset: %d, %s", (int)(p - buff), msg);
		if (!assertEqualInt(0, *p))
			break;
	}


	/* XXX more XXX */

	assertEqualInt(0, close(fd));
	free(buff);
	archive_entry_free(ae);
}

DEFINE_TEST(test_write_disk_sparse)
{
	struct archive *ad;


	/*
	 * The return values, etc, of the write data functions
	 * shouldn't change regardless of whether we've requested
	 * sparsification.  (The performance and pattern of actual
	 * write calls to the disk should vary, of course, but the
	 * client program shouldn't see any difference.)
	 */
	assert((ad = archive_write_disk_new()) != NULL);
        archive_write_disk_set_options(ad, 0);
	verify_write_data(ad, 0);
	verify_write_data_block(ad, 0);
	assertEqualInt(0, archive_write_finish(ad));

	assert((ad = archive_write_disk_new()) != NULL);
        archive_write_disk_set_options(ad, ARCHIVE_EXTRACT_SPARSE);
	verify_write_data(ad, 1);
	verify_write_data_block(ad, 1);
	assertEqualInt(0, archive_write_finish(ad));

}