Add boostrap for keepalive, keepidle option
diff --git a/Makefile.in b/Makefile.in index e8b89f7..d2073fb 100644 --- a/Makefile.in +++ b/Makefile.in
@@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.17 from Makefile.am. +# Makefile.in generated by automake 1.16.5 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2024 Free Software Foundation, Inc. +# Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -69,8 +69,6 @@ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -am__rm_f = rm -f $(am__rm_f_notfound) -am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -172,8 +170,8 @@ top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \ - ; rm -rf "$(distdir)" \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) @@ -203,16 +201,14 @@ done; \ reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = -9 +GZIP_ENV = --best DIST_TARGETS = dist-gzip # Exists only to be overridden by the user if desired. AM_DISTCHECK_DVI_TARGET = dvi distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = \ - find . \( -type f -a \! \ - \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print +distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ @@ -241,7 +237,6 @@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ -FILECMD = @FILECMD@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ @@ -299,10 +294,8 @@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ -am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ -am__xargs_n = @am__xargs_n@ ax_pthread_config = @ax_pthread_config@ bindir = @bindir@ build = @build@ @@ -504,7 +497,7 @@ distdir-am: $(DISTFILES) $(am__remove_distdir) - $(AM_V_at)$(MKDIR_P) "$(distdir)" + test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -615,7 +608,7 @@ distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ @@ -625,7 +618,7 @@ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ *.tar.zst*) \ @@ -725,8 +718,8 @@ clean-generic: distclean-generic: - -$(am__rm_f) $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -826,10 +819,3 @@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: - -# Tell GNU make to disable its built-in pattern rules. -%:: %,v -%:: RCS/%,v -%:: RCS/% -%:: s.% -%:: SCCS/s.%
diff --git a/aclocal.m4 b/aclocal.m4 index 8abca22..04bbdaf 100644 --- a/aclocal.m4 +++ b/aclocal.m4
@@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.17 -*- Autoconf -*- +# generated automatically by aclocal 1.16.5 -*- Autoconf -*- -# Copyright (C) 1996-2024 Free Software Foundation, Inc. +# Copyright (C) 1996-2021 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -14,16 +14,15 @@ m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.72],, -[m4_warning([this file was generated for autoconf 2.72. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.71],, +[m4_warning([this file was generated for autoconf 2.71. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # -# Copyright (C) 1996-2001, 2003-2019, 2021-2024 Free Software -# Foundation, Inc. +# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives @@ -31,13 +30,13 @@ # modifications, as long as this notice is preserved. m4_define([_LT_COPYING], [dnl -# Copyright (C) 2024 Free Software Foundation, Inc. +# Copyright (C) 2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or +# the Free Software Foundation; either version 2 of of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, if you @@ -54,7 +53,7 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. ]) -# serial 63 LT_INIT +# serial 58 LT_INIT # LT_PREREQ(VERSION) @@ -82,7 +81,7 @@ # LT_INIT([OPTIONS]) # ------------------ AC_DEFUN([LT_INIT], -[AC_PREREQ([2.64])dnl We use AC_PATH_PROGS_FEATURE_CHECK +[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl AC_BEFORE([$0], [LT_LANG])dnl AC_BEFORE([$0], [LT_OUTPUT])dnl @@ -204,7 +203,6 @@ m4_require([_LT_CHECK_SHELL_FEATURES])dnl m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_DECL_FILECMD])dnl m4_require([_LT_CHECK_MAGIC_METHOD])dnl m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl m4_require([_LT_CMD_OLD_ARCHIVE])dnl @@ -243,8 +241,8 @@ ofile=libtool can_build_shared=yes -# All known linkers require a '.a' archive for static linking (except MSVC and -# ICC, which need '.lib'). +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld @@ -632,7 +630,7 @@ # LT_OUTPUT # --------- # This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), in case it is used in configure for compilation +# AC_OUTPUT is called), incase it is used in configure for compilation # tests. AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} @@ -667,9 +665,9 @@ m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) configured by $[0], generated by m4_PACKAGE_STRING. -Copyright (C) 2024 Free Software Foundation, Inc. +Copyright (C) 2011 Free Software Foundation, Inc. This config.lt script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." +gives unlimited permision to copy, distribute and modify it." while test 0 != $[#] do @@ -795,7 +793,7 @@ # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? - $SED '$q' "$ltmain" >> "$cfgfile" \ + sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || @@ -988,7 +986,6 @@ $RM -r conftest* ])# _LT_LINKER_BOILERPLATE - # _LT_REQUIRED_DARWIN_CHECKS # ------------------------- m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ @@ -1039,21 +1036,6 @@ rm -f conftest.* fi]) - # Feature test to disable chained fixups since it is not - # compatible with '-undefined dynamic_lookup' - AC_CACHE_CHECK([for -no_fixup_chains linker flag], - [lt_cv_support_no_fixup_chains], - [ save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-no_fixup_chains" - AC_LINK_IFELSE( - [AC_LANG_PROGRAM([],[])], - lt_cv_support_no_fixup_chains=yes, - lt_cv_support_no_fixup_chains=no - ) - LDFLAGS=$save_LDFLAGS - ] - ) - AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no @@ -1073,12 +1055,12 @@ _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR $AR_FLAGS libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR $AR_FLAGS libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$AR cr libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cr libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF -int main(void) { return 0;} +int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err @@ -1098,37 +1080,23 @@ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) - case $MACOSX_DEPLOYMENT_TARGET,$host in - 10.[[012]],*|,*powerpc*-darwin[[5-8]]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - *) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' - if test yes = "$lt_cv_support_no_fixup_chains"; then - AS_VAR_APPEND([_lt_dar_allow_undefined], [' $wl-no_fixup_chains']) - fi - ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[912]]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[[012]][[,.]]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*|11.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - _lt_dar_needs_single_mod=no - case $host_os in - rhapsody* | darwin1.*) - _lt_dar_needs_single_mod=yes ;; - darwin*) - # When targeting Mac OS X 10.4 (darwin 8) or later, - # -single_module is the default and -multi_module is unsupported. - # The toolchain on macOS 10.14 (darwin 18) and later cannot - # target any OS version that needs -single_module. - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*-darwin[[567]].*|10.[[0-3]],*-darwin[[5-9]].*|10.[[0-3]],*-darwin1[[0-7]].*) - _lt_dar_needs_single_mod=yes ;; - esac - ;; - esac if test yes = "$lt_cv_ld_exported_symbols_list"; then _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else @@ -1171,12 +1139,12 @@ output_verbose_link_cmd=func_echo_all _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - _LT_TAGVAR(module_expsym_cmds, $1)="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" m4_if([$1], [CXX], -[ if test yes = "$_lt_dar_needs_single_mod" -a yes != "$lt_cv_apple_cc_single_mod"; then +[ if test yes != "$lt_cv_apple_cc_single_mod"; then _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil" - _LT_TAGVAR(archive_expsym_cmds, $1)="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil" fi ],[]) else @@ -1290,8 +1258,7 @@ # _LT_WITH_SYSROOT # ---------------- AC_DEFUN([_LT_WITH_SYSROOT], -[m4_require([_LT_DECL_SED])dnl -AC_MSG_CHECKING([for sysroot]) +[AC_MSG_CHECKING([for sysroot]) AC_ARG_WITH([sysroot], [AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@], [Search for dependent libraries within DIR (or the compiler's sysroot @@ -1304,13 +1271,11 @@ case $with_sysroot in #( yes) if test yes = "$GCC"; then - # Trim trailing / since we'll always append absolute paths and we want - # to avoid //, if only for less confusing output for the user. - lt_sysroot=`$CC --print-sysroot 2>/dev/null | $SED 's:/\+$::'` + lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) - lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"` + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( @@ -1340,7 +1305,7 @@ # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE=32 ;; @@ -1357,7 +1322,7 @@ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test yes = "$lt_cv_prog_gnu_ld"; then - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; @@ -1369,7 +1334,7 @@ ;; esac else - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -1391,7 +1356,7 @@ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then emul=elf - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) emul="${emul}32" ;; @@ -1399,7 +1364,7 @@ emul="${emul}64" ;; esac - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *MSB*) emul="${emul}btsmip" ;; @@ -1407,7 +1372,7 @@ emul="${emul}ltsmip" ;; esac - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *N32*) emul="${emul}n32" ;; @@ -1418,7 +1383,7 @@ ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*|x86_64-gnu*) +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. Note that the listed cases only cover the # situations where additional linker options are needed (such as when @@ -1427,14 +1392,14 @@ # not appear in the list. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case `$FILECMD conftest.o` in + case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; - x86_64-*linux*|x86_64-gnu*) - case `$FILECMD conftest.o` in + x86_64-*linux*) + case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; @@ -1462,7 +1427,7 @@ x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; - x86_64-*linux*|x86_64-gnu*) + x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*linux*) @@ -1502,7 +1467,7 @@ # options accordingly. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case `$FILECMD conftest.o` in + case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) @@ -1541,22 +1506,9 @@ m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} +: ${AR_FLAGS=cr} _LT_DECL([], [AR], [1], [The archiver]) - -# Use ARFLAGS variable as AR's operation code to sync the variable naming with -# Automake. If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have -# higher priority because that's what people were doing historically (setting -# ARFLAGS for automake and AR_FLAGS for libtool). FIXME: Make the AR_FLAGS -# variable obsoleted/removed. - -test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr} -lt_ar_flags=$AR_FLAGS -_LT_DECL([], [lt_ar_flags], [0], [Flags to create an archive (by configure)]) - -# Make AR_FLAGS overridable by 'make ARFLAGS='. Don't try to run-time override -# by AR_FLAGS because that was never working and AR_FLAGS is about to die. -_LT_DECL([], [AR_FLAGS], [\@S|@{ARFLAGS-"\@S|@lt_ar_flags"}], - [Flags to create an archive]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no @@ -1595,7 +1547,7 @@ test -z "$STRIP" && STRIP=: _LT_DECL([], [STRIP], [1], [A symbol stripping program]) -AC_REQUIRE([AC_PROG_RANLIB]) +AC_CHECK_TOOL(RANLIB, ranlib, :) test -z "$RANLIB" && RANLIB=: _LT_DECL([], [RANLIB], [1], [Commands used to install an old-style archive]) @@ -1606,8 +1558,15 @@ old_postuninstall_cmds= if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in @@ -1739,14 +1698,14 @@ lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; - gnu* | ironclad*) - # Under GNU Hurd and Ironclad, this test is not required because there - # is no limit to the length of command line arguments. + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; - cygwin* | mingw* | windows* | cegcc*) + cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, @@ -1768,7 +1727,7 @@ lt_cv_sys_max_cmd_len=8192; ;; - darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -1811,7 +1770,7 @@ sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[[ ]]//'` + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi @@ -1928,11 +1887,11 @@ /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord (void) __attribute__((visibility("default"))); +int fnord () __attribute__((visibility("default"))); #endif -int fnord (void) { return 42; } -int main (void) +int fnord () { return 42; } +int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; @@ -1989,7 +1948,7 @@ lt_cv_dlopen_self=yes ;; - mingw* | windows* | pw32* | cegcc*) + mingw* | pw32* | cegcc*) lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; @@ -2261,35 +2220,26 @@ striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -z "$STRIP"; then - AC_MSG_RESULT([no]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) else - if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - old_striplib="$STRIP --strip-debug" - striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) - else - case $host_os in - darwin*) - # FIXME - insert some real tests, host_os isn't really good enough +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) - ;; - freebsd*) - if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then - old_striplib="$STRIP --strip-debug" - striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) + else AC_MSG_RESULT([no]) - ;; - esac - fi + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) @@ -2357,7 +2307,7 @@ *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | windows* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;; *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` @@ -2415,7 +2365,7 @@ # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in - mingw* | windows* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` @@ -2490,7 +2440,7 @@ # Unfortunately, runtime linking may impact performance, so we do # not want this to be the default eventually. Also, we use the # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --enable-aix-soname=svr4 only. + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. # To allow for filename-based versioning support, we need to create # libNAME.so.V as an archive file, containing: # *) an Import File, referring to the versioned filename of the @@ -2584,7 +2534,7 @@ # libtool to hard-code these into programs ;; -cygwin* | mingw* | windows* | pw32* | cegcc*) +cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=.dll need_version=no @@ -2595,29 +2545,15 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - # If user builds GCC with multilib enabled, - # it should just install on $(libdir) - # not on $(libdir)/../bin or 32 bits dlls would override 64 bit ones. - if test xyes = x"$multilib"; then - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - $install_prog $dir/$dlname $destdir/$dlname~ - chmod a+x $destdir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib $destdir/$dlname'\'' || exit \$?; - fi' - else - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - fi + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' @@ -2626,30 +2562,30 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; - mingw* | windows* | cegcc*) + mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' ;; - *,cl* | *,icl*) - # Native MSVC or ICC + *,cl*) + # Native MSVC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' case $build_os in - mingw* | windows*) + mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' @@ -2662,7 +2598,7 @@ done IFS=$lt_save_ifs # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form @@ -2699,7 +2635,7 @@ ;; *) - # Assume MSVC and ICC wrapper + # Assume MSVC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; @@ -2732,7 +2668,7 @@ shlibpath_var=LD_LIBRARY_PATH ;; -freebsd* | dragonfly* | midnightbsd*) +freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then @@ -2756,21 +2692,7 @@ need_version=yes ;; esac - case $host_cpu in - powerpc64) - # On FreeBSD bi-arch platforms, a different variable is used for 32-bit - # binaries. See <https://man.freebsd.org/cgi/man.cgi?query=ld.so>. - AC_COMPILE_IFELSE( - [AC_LANG_SOURCE( - [[int test_pointer_size[sizeof (void *) - 5]; - ]])], - [shlibpath_var=LD_LIBRARY_PATH], - [shlibpath_var=LD_32_LIBRARY_PATH]) - ;; - *) - shlibpath_var=LD_LIBRARY_PATH - ;; - esac + shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes @@ -2800,9 +2722,8 @@ soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/boot/system/non-packaged/develop/lib /boot/system/develop/lib' - sys_lib_dlsearch_path_spec='/boot/home/config/non-packaged/lib /boot/home/config/lib /boot/system/non-packaged/lib /boot/system/lib' - hardcode_into_libs=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) @@ -2912,7 +2833,7 @@ version_type=none # Android doesn't support versioned libraries. need_lib_prefix=no need_version=no - library_names_spec='$libname$release$shared_ext $libname$shared_ext' + library_names_spec='$libname$release$shared_ext' soname_spec='$libname$release$shared_ext' finish_cmds= shlibpath_var=LD_LIBRARY_PATH @@ -2924,9 +2845,8 @@ hardcode_into_libs=yes dynamic_linker='Android linker' - # -rpath works at least for libraries that are not overridden by - # libraries installed in system locations. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' + # Don't embed -rpath directories since the linker doesn't support them. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' ;; # This must be glibc/ELF. @@ -2960,7 +2880,7 @@ # before this can be enabled. hardcode_into_libs=yes - # Ideally, we could use ldconfig to report *all* directories which are + # Ideally, we could use ldconfig to report *all* directores which are # searched for libraries, however this is still not possible. Aside from not # being certain /sbin/ldconfig is available, command # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, @@ -2984,8 +2904,8 @@ version_type=linux need_lib_prefix=no need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -3010,18 +2930,6 @@ hardcode_into_libs=yes ;; -*-mlibc) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='mlibc ld.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' @@ -3041,7 +2949,7 @@ dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no @@ -3101,17 +3009,6 @@ dynamic_linker=no ;; -serenity*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - dynamic_linker='SerenityOS LibELF' - ;; - solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no @@ -3209,21 +3106,6 @@ shlibpath_var=LD_LIBRARY_PATH ;; -emscripten*) - version_type=none - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - dynamic_linker="Emscripten linker" - _LT_COMPILER_PIC($1)='-fPIC' - _LT_TAGVAR(archive_cmds, $1)='$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib -s EXPORTED_FUNCTIONS=@$output_objdir/$soname.expsym' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(no_undefined_flag, $1)= - ;; - *) dynamic_linker=no ;; @@ -3399,7 +3281,7 @@ # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in - *-*-mingw* | *-*-windows*) + *-*-mingw*) # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) @@ -3508,7 +3390,7 @@ esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) if test yes != "$GCC"; then reload_cmds=false fi @@ -3580,6 +3462,7 @@ # 'none' -- dependencies not supported. # 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # that responds to the $file_magic_cmd with a given extended regex. # If you have 'file' or equivalent on your system and you're not sure @@ -3596,7 +3479,7 @@ bsdi[[45]]*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='$FILECMD -L' + lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; @@ -3606,7 +3489,7 @@ lt_cv_file_magic_cmd='func_win32_libid' ;; -mingw* | windows* | pw32*) +mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. @@ -3615,7 +3498,7 @@ lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64|pe-aarch64)' + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; @@ -3630,14 +3513,14 @@ lt_cv_deplibs_check_method=pass_all ;; -freebsd* | dragonfly* | midnightbsd*) +freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac @@ -3651,7 +3534,7 @@ ;; hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' @@ -3688,10 +3571,6 @@ lt_cv_deplibs_check_method=pass_all ;; -*-mlibc) - lt_cv_deplibs_check_method=pass_all - ;; - netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' @@ -3702,7 +3581,7 @@ newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; @@ -3710,7 +3589,7 @@ lt_cv_deplibs_check_method=pass_all ;; -openbsd*) +openbsd* | bitrig*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else @@ -3726,10 +3605,6 @@ lt_cv_deplibs_check_method=pass_all ;; -serenity*) - lt_cv_deplibs_check_method=pass_all - ;; - solaris*) lt_cv_deplibs_check_method=pass_all ;; @@ -3778,7 +3653,7 @@ want_nocaseglob=no if test "$build" = "$host"; then case $host_os in - mingw* | windows* | pw32*) + mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else @@ -3830,16 +3705,16 @@ # Tru64's nm complains that /dev/null is an invalid object file # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty case $build_os in - mingw* | windows*) lt_bad_file=conftest.nm/nofile ;; + mingw*) lt_bad_file=conftest.nm/nofile ;; *) lt_bad_file=/dev/null ;; esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break 2 ;; *) - case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break 2 @@ -3865,7 +3740,7 @@ # Let the user override the test. else AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols -headers" ;; @@ -3921,7 +3796,7 @@ [lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in -cygwin* | mingw* | windows* | pw32* | cegcc*) +cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh; # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in @@ -3953,16 +3828,16 @@ m4_defun([_LT_PATH_MANIFEST_TOOL], [AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_manifest_tool], - [lt_cv_path_manifest_tool=no +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&AS_MESSAGE_LOG_FD if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_manifest_tool=yes + lt_cv_path_mainfest_tool=yes fi rm -f conftest*]) -if test yes != "$lt_cv_path_manifest_tool"; then +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi _LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl @@ -3991,7 +3866,7 @@ [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-mingw* | *-*-pw32* | *-*-darwin*) +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) @@ -4066,7 +3941,7 @@ aix*) symcode='[[BCDT]]' ;; -cygwin* | mingw* | windows* | pw32* | cegcc*) +cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; hpux*) @@ -4081,7 +3956,7 @@ symcode='[[BCDEGQRST]]' ;; solaris*) - symcode='[[BCDRT]]' + symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' @@ -4105,7 +3980,7 @@ if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'" + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" # Adjust the below global symbol transforms to fixup imported variables. lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" @@ -4123,20 +3998,20 @@ # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="$SED -n"\ +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ $lt_cdecl_hook\ " -e 's/^T .* \(.*\)$/extern int \1();/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\ +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ $lt_c_name_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" # Transform an extracted symbol line into symbol name with lib prefix and # symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ $lt_c_name_lib_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ @@ -4145,7 +4020,7 @@ # Handle CRLF in mingw tool chain opt_cr= case $build_os in -mingw* | windows*) +mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac @@ -4160,7 +4035,7 @@ if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++ or ICC, + # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ @@ -4178,9 +4053,9 @@ " s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx]" else - lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'" + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no @@ -4196,7 +4071,7 @@ #ifdef __cplusplus } #endif -int main(void){nm_test_var='a';nm_test_func();return(0);} +int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if AC_TRY_EVAL(ac_compile); then @@ -4373,7 +4248,7 @@ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; - mingw* | windows* | cygwin* | os2* | pw32* | cegcc*) + mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style @@ -4449,7 +4324,7 @@ ;; esac ;; - mingw* | windows* | cygwin* | os2* | pw32* | cegcc*) + mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], @@ -4468,7 +4343,7 @@ ;; esac ;; - freebsd* | dragonfly* | midnightbsd*) + freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) @@ -4551,7 +4426,7 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) - case `$CC -V 2>&1 | $SED 5q` in + case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' @@ -4577,8 +4452,6 @@ ;; netbsd* | netbsdelf*-gnu) ;; - *-mlibc) - ;; *qnx* | *nto*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. @@ -4607,8 +4480,6 @@ ;; psos*) ;; - serenity*) - ;; solaris*) case $cc_basename in CC* | sunCC*) @@ -4701,7 +4572,7 @@ # PIC is the default for these OSes. ;; - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style @@ -4805,7 +4676,7 @@ esac ;; - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], @@ -4847,8 +4718,8 @@ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; - *flang* | ftn | f18* | f95*) - # Flang compiler. + # flang / f18. f95 an alias for gfortran or flang on Debian + flang* | f18* | f95*) _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' @@ -4897,7 +4768,7 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) - case `$CC -V 2>&1 | $SED 5q` in + case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' @@ -4935,12 +4806,6 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; - *-mlibc) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. @@ -4957,9 +4822,6 @@ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - serenity*) - ;; - solaris*) _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' @@ -5089,15 +4951,15 @@ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds ;; - cygwin* | mingw* | windows* | cegcc*) + cygwin* | mingw* | cegcc*) case $cc_basename in - cl* | icl*) + cl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) @@ -5106,6 +4968,9 @@ ;; esac ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; *) _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; @@ -5153,18 +5018,24 @@ extract_expsyms_cmds= case $host_os in - cygwin* | mingw* | windows* | pw32* | cegcc*) - # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using - # Microsoft Visual C++ or Intel C++ Compiler. + # Microsoft Visual C++. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC) + # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; esac _LT_TAGVAR(ld_shlibs, $1)=yes @@ -5211,7 +5082,7 @@ _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no - case `$LD -v | $SED -e 's/([[^)]]\+)\s\+//' 2>&1` in + case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -5265,7 +5136,7 @@ fi ;; - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' @@ -5275,7 +5146,6 @@ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - _LT_TAGVAR(file_list_spec, $1)='@' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -5295,7 +5165,7 @@ haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=yes ;; os2*) @@ -5322,9 +5192,8 @@ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' ;; interix[[3-9]]*) @@ -5339,7 +5208,7 @@ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) @@ -5382,7 +5251,7 @@ _LT_TAGVAR(compiler_needs_object, $1)=yes ;; esac - case `$CC -V 2>&1 | $SED 5q` in + case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' _LT_TAGVAR(compiler_needs_object, $1)=yes @@ -5394,14 +5263,13 @@ if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in tcc*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic' ;; xlf* | bgf* | bgxlf* | mpixlf*) @@ -5411,7 +5279,7 @@ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi @@ -5422,11 +5290,6 @@ fi ;; - *-mlibc) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' @@ -5548,7 +5411,7 @@ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no @@ -5729,14 +5592,14 @@ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using - # Microsoft Visual C++ or Intel C++ Compiler. + # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in - cl* | icl*) - # Native MSVC or ICC + cl*) + # Native MSVC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes @@ -5746,14 +5609,14 @@ # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -Fe$output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ - $CC -Fe$tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' @@ -5777,7 +5640,7 @@ fi' ;; *) - # Assume MSVC and ICC wrapper + # Assume MSVC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. @@ -5825,7 +5688,7 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly* | midnightbsd*) + freebsd* | dragonfly*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_TAGVAR(hardcode_direct, $1)=yes @@ -5948,6 +5811,7 @@ if test yes = "$lt_cv_irix_exported_symbol"; then _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi + _LT_TAGVAR(link_all_deplibs, $1)=no else _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' @@ -5965,14 +5829,10 @@ # Fabrice Bellard et al's Tiny C Compiler _LT_TAGVAR(ld_shlibs, $1)=yes _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir' ;; esac ;; - *-mlibc) - ;; - netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -5995,7 +5855,7 @@ *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -6038,9 +5898,8 @@ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' ;; osf3*) @@ -6074,9 +5933,6 @@ _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; - serenity*) - ;; - solaris*) _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test yes = "$GCC"; then @@ -6335,7 +6191,7 @@ _LT_TAGDECL([], [hardcode_direct_absolute], [0], [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes DIR into the resulting binary and the resulting library dependency is - "absolute", i.e. impossible to change by setting $shlibpath_var if the + "absolute", i.e impossible to change by setting $shlibpath_var if the library is relocated]) _LT_TAGDECL([], [hardcode_minus_L], [0], [Set to "yes" if using the -LDIR flag during linking hardcodes DIR @@ -6393,7 +6249,7 @@ lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests -lt_simple_link_test_code='int main(void){return(0);}' +lt_simple_link_test_code='int main(){return(0);}' _LT_TAG_COMPILER # Save the default compiler, since it gets overwritten when the other @@ -6578,7 +6434,8 @@ wlarc='$wl' # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' else _LT_TAGVAR(whole_archive_flag_spec, $1)= @@ -6598,7 +6455,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " [[-]]L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' else GXX=no @@ -6807,10 +6664,10 @@ esac ;; - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in - ,cl* | no,cl* | ,icl* | no,icl*) - # Native MSVC or ICC + ,cl* | no,cl*) + # Native MSVC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' @@ -6860,7 +6717,6 @@ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=no _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -6907,9 +6763,8 @@ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' ;; dgux*) @@ -6940,7 +6795,7 @@ _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; - freebsd* | dragonfly* | midnightbsd*) + freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_TAGVAR(ld_shlibs, $1)=yes @@ -6948,7 +6803,7 @@ haiku*) _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=yes ;; hpux9*) @@ -6975,7 +6830,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "[[-]]L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes = "$GXX"; then @@ -7040,7 +6895,7 @@ # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP " [[-]]L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP " \-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' ;; *) if test yes = "$GXX"; then @@ -7077,7 +6932,7 @@ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in @@ -7217,13 +7072,13 @@ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' if test yes = "$supports_anon_versioning"; then _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi ;; *) - case `$CC -V 2>&1 | $SED 5q` in + case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' @@ -7272,10 +7127,6 @@ esac ;; - *-mlibc) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - netbsd*) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' @@ -7292,7 +7143,7 @@ _LT_TAGVAR(ld_shlibs, $1)=yes ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then _LT_TAGVAR(hardcode_direct, $1)=yes _LT_TAGVAR(hardcode_shlibpath_var, $1)=no @@ -7383,7 +7234,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " [[-]]L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' else # FIXME: insert proper C++ library support @@ -7398,9 +7249,6 @@ _LT_TAGVAR(ld_shlibs, $1)=no ;; - serenity*) - ;; - sunos4*) case $cc_basename in CC*) @@ -7470,7 +7318,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " [[-]]L"' + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' else # g++ 2.7 appears to require '-G' NOT '-shared' on this # platform. @@ -7481,7 +7329,7 @@ # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " [[-]]L"' + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP " \-L"' fi _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir' @@ -7719,11 +7567,10 @@ case $prev$p in -L* | -R* | -l*) - # Some compilers place space between "-{L,R,l}" and the path. + # Some compilers place space between "-{L,R}" and the path. # Remove the space. - if test x-L = x"$p" || - test x-R = x"$p" || - test x-l = x"$p"; then + if test x-L = "$p" || + test x-R = "$p"; then prev=$p continue fi @@ -8369,14 +8216,6 @@ AC_SUBST([DLLTOOL]) ]) -# _LT_DECL_FILECMD -# ---------------- -# Check for a file(cmd) program that can be used to detect file type and magic -m4_defun([_LT_DECL_FILECMD], -[AC_CHECK_PROG([FILECMD], [file], [file], [:]) -_LT_DECL([], [FILECMD], [1], [A file(cmd) program that detects file types]) -])# _LD_DECL_FILECMD - # _LT_DECL_SED # ------------ # Check for a fully-functional sed program, that truncates @@ -8389,6 +8228,71 @@ _LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], [Sed that helps us avoid accidentally triggering echo(1) options like -n]) ])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f "$lt_ac_sed" && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test 10 -lt "$lt_ac_count" && break + lt_ac_count=`expr $lt_ac_count + 1` + if test "$lt_ac_count" -gt "$lt_ac_max"; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) dnl aclocal-1.4 backwards compatibility: dnl AC_DEFUN([LT_AC_PROG_SED], []) @@ -8435,7 +8339,7 @@ [case $host in *-*-mingw* ) case $build in - *-*-mingw* | *-*-windows* ) # actually msys + *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) @@ -8448,7 +8352,7 @@ ;; *-*-cygwin* ) case $build in - *-*-mingw* | *-*-windows* ) # actually msys + *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) @@ -8474,9 +8378,9 @@ [#assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in - *-*-mingw* | *-*-windows* ) + *-*-mingw* ) case $build in - *-*-mingw* | *-*-windows* ) # actually msys + *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac @@ -8491,15 +8395,15 @@ # Helper functions for option handling. -*- Autoconf -*- # -# Copyright (C) 2004-2005, 2007-2009, 2011-2019, 2021-2024 Free -# Software Foundation, Inc. +# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software +# Foundation, Inc. # Written by Gary V. Vaughan, 2004 # # This file is free software; the Free Software Foundation gives # unlimited permission to copy and/or distribute it, with or without # modifications, as long as this notice is preserved. -# serial 10 ltoptions.m4 +# serial 8 ltoptions.m4 # This is to help aclocal find these macros, as it can't see m4_define. AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) @@ -8616,7 +8520,7 @@ [enable_win32_dll=yes case $host in -*-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-cegcc*) +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) @@ -8811,39 +8715,29 @@ # _LT_WITH_AIX_SONAME([DEFAULT]) # ---------------------------------- -# implement the --enable-aix-soname configure option, and support the -# `aix-soname=aix' and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. -# DEFAULT is either `aix', `both', or `svr4'. If omitted, it defaults to `aix'. +# implement the --with-aix-soname flag, and support the `aix-soname=aix' +# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT +# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'. m4_define([_LT_WITH_AIX_SONAME], [m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl shared_archive_member_spec= case $host,$enable_shared in power*-*-aix[[5-9]]*,yes) AC_MSG_CHECKING([which variant of shared library versioning to provide]) - AC_ARG_ENABLE([aix-soname], - [AS_HELP_STRING([--enable-aix-soname=aix|svr4|both], + AC_ARG_WITH([aix-soname], + [AS_HELP_STRING([--with-aix-soname=aix|svr4|both], [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])], - [case $enableval in - aix|svr4|both) - ;; - *) - AC_MSG_ERROR([Unknown argument to --enable-aix-soname]) - ;; - esac - lt_cv_with_aix_soname=$enable_aix_soname], - [_AC_ENABLE_IF([with], [aix-soname], - [case $withval in - aix|svr4|both) - ;; - *) - AC_MSG_ERROR([Unknown argument to --with-aix-soname]) - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname], - [AC_CACHE_VAL([lt_cv_with_aix_soname], - [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)]) - enable_aix_soname=$lt_cv_with_aix_soname]) - with_aix_soname=$enable_aix_soname + [case $withval in + aix|svr4|both) + ;; + *) + AC_MSG_ERROR([Unknown argument to --with-aix-soname]) + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname], + [AC_CACHE_VAL([lt_cv_with_aix_soname], + [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT) + with_aix_soname=$lt_cv_with_aix_soname]) AC_MSG_RESULT([$with_aix_soname]) if test aix != "$with_aix_soname"; then # For the AIX way of multilib, we name the shared archive member @@ -8874,50 +8768,30 @@ # _LT_WITH_PIC([MODE]) # -------------------- -# implement the --enable-pic flag, and support the 'pic-only' and 'no-pic' +# implement the --with-pic flag, and support the 'pic-only' and 'no-pic' # LT_INIT options. # MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'. m4_define([_LT_WITH_PIC], -[AC_ARG_ENABLE([pic], - [AS_HELP_STRING([--enable-pic@<:@=PKGS@:>@], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [lt_p=${PACKAGE-default} - case $enableval in - yes|no) pic_mode=$enableval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [dnl Continue to support --with-pic and --without-pic, for backward - dnl compatibility. - _AC_ENABLE_IF([with], [pic], - [lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac], - [pic_mode=m4_default([$1], [default])])] - ) + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac], + [pic_mode=m4_default([$1], [default])]) _LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl ])# _LT_WITH_PIC @@ -8953,7 +8827,7 @@ # ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # -# Copyright (C) 2004-2005, 2007-2008, 2011-2019, 2021-2024 Free Software +# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software # Foundation, Inc. # Written by Gary V. Vaughan, 2004 # @@ -9078,8 +8952,7 @@ # ltversion.m4 -- version numbers -*- Autoconf -*- # -# Copyright (C) 2004, 2011-2019, 2021-2024 Free Software Foundation, -# Inc. +# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives @@ -9088,23 +8961,23 @@ # @configure_input@ -# serial 4441 ltversion.m4 +# serial 4179 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.5.4]) -m4_define([LT_PACKAGE_REVISION], [2.5.4]) +m4_define([LT_PACKAGE_VERSION], [2.4.6]) +m4_define([LT_PACKAGE_REVISION], [2.4.6]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.5.4' -macro_revision='2.5.4' +[macro_version='2.4.6' +macro_revision='2.4.6' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # -# Copyright (C) 2004-2005, 2007, 2009, 2011-2019, 2021-2024 Free -# Software Foundation, Inc. +# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software +# Foundation, Inc. # Written by Scott James Remnant, 2004. # # This file is free software; the Free Software Foundation gives @@ -9201,7 +9074,7 @@ m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) -# Copyright (C) 2002-2024 Free Software Foundation, Inc. +# Copyright (C) 2002-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9213,10 +9086,10 @@ # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.17' +[am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.17], [], +m4_if([$1], [1.16.5], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -9232,14 +9105,14 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.17])dnl +[AM_AUTOMAKE_VERSION([1.16.5])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2024 Free Software Foundation, Inc. +# Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9291,7 +9164,7 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2024 Free Software Foundation, Inc. +# Copyright (C) 1997-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9322,7 +9195,7 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2024 Free Software Foundation, Inc. +# Copyright (C) 1999-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9454,7 +9327,7 @@ # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thus: + # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported @@ -9513,7 +9386,7 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2024 Free Software Foundation, Inc. +# Copyright (C) 1999-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9581,7 +9454,7 @@ # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2024 Free Software Foundation, Inc. +# Copyright (C) 1996-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9715,7 +9588,7 @@ fi AC_SUBST([CSCOPE]) -AC_REQUIRE([_AM_SILENT_RULES])dnl +AC_REQUIRE([AM_SILENT_RULES])dnl dnl The testsuite driver may need to know about EXEEXT, so add the dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. @@ -9723,9 +9596,47 @@ [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -AC_REQUIRE([_AM_PROG_RM_F]) -AC_REQUIRE([_AM_PROG_XARGS_N]) +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542> + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: <https://www.gnu.org/software/coreutils/>. + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi dnl The trailing newline in this macro's definition is deliberate, for dnl backward compatibility and to allow trailing 'dnl'-style comments dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. @@ -9758,7 +9669,7 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2024 Free Software Foundation, Inc. +# Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9779,7 +9690,7 @@ fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2024 Free Software Foundation, Inc. +# Copyright (C) 2003-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9801,7 +9712,7 @@ # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering -# Copyright (C) 1996-2024 Free Software Foundation, Inc. +# Copyright (C) 1996-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9836,7 +9747,7 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2024 Free Software Foundation, Inc. +# Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9879,7 +9790,7 @@ # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2024 Free Software Foundation, Inc. +# Copyright (C) 1997-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9913,7 +9824,7 @@ # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2024 Free Software Foundation, Inc. +# Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9942,7 +9853,7 @@ AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2024 Free Software Foundation, Inc. +# Copyright (C) 1999-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9989,23 +9900,7 @@ # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2022-2024 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_RM_F -# --------------- -# Check whether 'rm -f' without any arguments works. -# https://bugs.gnu.org/10828 -AC_DEFUN([_AM_PROG_RM_F], -[am__rm_f_notfound= -AS_IF([(rm -f && rm -fr && rm -rf) 2>/dev/null], [], [am__rm_f_notfound='""']) -AC_SUBST(am__rm_f_notfound) -]) - -# Copyright (C) 2001-2024 Free Software Foundation, Inc. +# Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10024,169 +9919,16 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2024 Free Software Foundation, Inc. +# Copyright (C) 1996-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# _AM_SLEEP_FRACTIONAL_SECONDS -# ---------------------------- -AC_DEFUN([_AM_SLEEP_FRACTIONAL_SECONDS], [dnl -AC_CACHE_CHECK([whether sleep supports fractional seconds], - am_cv_sleep_fractional_seconds, [dnl -AS_IF([sleep 0.001 2>/dev/null], [am_cv_sleep_fractional_seconds=yes], - [am_cv_sleep_fractional_seconds=no]) -])]) - -# _AM_FILESYSTEM_TIMESTAMP_RESOLUTION -# ----------------------------------- -# Determine the filesystem's resolution for file modification -# timestamps. The coarsest we know of is FAT, with a resolution -# of only two seconds, even with the most recent "exFAT" extensions. -# The finest (e.g. ext4 with large inodes, XFS, ZFS) is one -# nanosecond, matching clock_gettime. However, it is probably not -# possible to delay execution of a shell script for less than one -# millisecond, due to process creation overhead and scheduling -# granularity, so we don't check for anything finer than that. (See below.) -AC_DEFUN([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION], [dnl -AC_REQUIRE([_AM_SLEEP_FRACTIONAL_SECONDS]) -AC_CACHE_CHECK([filesystem timestamp resolution], - am_cv_filesystem_timestamp_resolution, [dnl -# Default to the worst case. -am_cv_filesystem_timestamp_resolution=2 - -# Only try to go finer than 1 sec if sleep can do it. -# Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work, -# - 1 sec is not much of a win compared to 2 sec, and -# - it takes 2 seconds to perform the test whether 1 sec works. -# -# Instead, just use the default 2s on platforms that have 1s resolution, -# accept the extra 1s delay when using $sleep in the Automake tests, in -# exchange for not incurring the 2s delay for running the test for all -# packages. -# -am_try_resolutions= -if test "$am_cv_sleep_fractional_seconds" = yes; then - # Even a millisecond often causes a bunch of false positives, - # so just try a hundredth of a second. The time saved between .001 and - # .01 is not terribly consequential. - am_try_resolutions="0.01 0.1 $am_try_resolutions" -fi - -# In order to catch current-generation FAT out, we must *modify* files -# that already exist; the *creation* timestamp is finer. Use names -# that make ls -t sort them differently when they have equal -# timestamps than when they have distinct timestamps, keeping -# in mind that ls -t prints the *newest* file first. -rm -f conftest.ts? -: > conftest.ts1 -: > conftest.ts2 -: > conftest.ts3 - -# Make sure ls -t actually works. Do 'set' in a subshell so we don't -# clobber the current shell's arguments. (Outer-level square brackets -# are removed by m4; they're present so that m4 does not expand -# <dollar><star>; be careful, easy to get confused.) -if ( - set X `[ls -t conftest.ts[12]]` && - { - test "$[]*" != "X conftest.ts1 conftest.ts2" || - test "$[]*" != "X conftest.ts2 conftest.ts1"; - } -); then :; else - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - _AS_ECHO_UNQUOTED( - ["Bad output from ls -t: \"`[ls -t conftest.ts[12]]`\""], - [AS_MESSAGE_LOG_FD]) - AC_MSG_FAILURE([ls -t produces unexpected output. -Make sure there is not a broken ls alias in your environment.]) -fi - -for am_try_res in $am_try_resolutions; do - # Any one fine-grained sleep might happen to cross the boundary - # between two values of a coarser actual resolution, but if we do - # two fine-grained sleeps in a row, at least one of them will fall - # entirely within a coarse interval. - echo alpha > conftest.ts1 - sleep $am_try_res - echo beta > conftest.ts2 - sleep $am_try_res - echo gamma > conftest.ts3 - - # We assume that 'ls -t' will make use of high-resolution - # timestamps if the operating system supports them at all. - if (set X `ls -t conftest.ts?` && - test "$[]2" = conftest.ts3 && - test "$[]3" = conftest.ts2 && - test "$[]4" = conftest.ts1); then - # - # Ok, ls -t worked. If we're at a resolution of 1 second, we're done, - # because we don't need to test make. - make_ok=true - if test $am_try_res != 1; then - # But if we've succeeded so far with a subsecond resolution, we - # have one more thing to check: make. It can happen that - # everything else supports the subsecond mtimes, but make doesn't; - # notably on macOS, which ships make 3.81 from 2006 (the last one - # released under GPLv2). https://bugs.gnu.org/68808 - # - # We test $MAKE if it is defined in the environment, else "make". - # It might get overridden later, but our hope is that in practice - # it does not matter: it is the system "make" which is (by far) - # the most likely to be broken, whereas if the user overrides it, - # probably they did so with a better, or at least not worse, make. - # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html - # - # Create a Makefile (real tab character here): - rm -f conftest.mk - echo 'conftest.ts1: conftest.ts2' >conftest.mk - echo ' touch conftest.ts2' >>conftest.mk - # - # Now, running - # touch conftest.ts1; touch conftest.ts2; make - # should touch ts1 because ts2 is newer. This could happen by luck, - # but most often, it will fail if make's support is insufficient. So - # test for several consecutive successes. - # - # (We reuse conftest.ts[12] because we still want to modify existing - # files, not create new ones, per above.) - n=0 - make=${MAKE-make} - until test $n -eq 3; do - echo one > conftest.ts1 - sleep $am_try_res - echo two > conftest.ts2 # ts2 should now be newer than ts1 - if $make -f conftest.mk | grep 'up to date' >/dev/null; then - make_ok=false - break # out of $n loop - fi - n=`expr $n + 1` - done - fi - # - if $make_ok; then - # Everything we know to check worked out, so call this resolution good. - am_cv_filesystem_timestamp_resolution=$am_try_res - break # out of $am_try_res loop - fi - # Otherwise, we'll go on to check the next resolution. - fi -done -rm -f conftest.ts? -# (end _am_filesystem_timestamp_resolution) -])]) - # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], -[AC_REQUIRE([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION]) -# This check should not be cached, as it may vary across builds of -# different projects. -AC_MSG_CHECKING([whether build environment is sane]) +[AC_MSG_CHECKING([whether build environment is sane]) # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' @@ -10205,40 +9947,49 @@ # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). -am_build_env_is_sane=no -am_has_slept=no -rm -f conftest.file -for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[]*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - test "$[]2" = conftest.file - ); then - am_build_env_is_sane=yes - break - fi - # Just in case. - sleep "$am_cv_filesystem_timestamp_resolution" - am_has_slept=yes -done +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then -AC_MSG_RESULT([$am_build_env_is_sane]) -if test "$am_build_env_is_sane" = no; then - AC_MSG_ERROR([newly created file is older than distributed files! + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi - +AC_MSG_RESULT([yes]) # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= -AS_IF([test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1],, [dnl - ( sleep "$am_cv_filesystem_timestamp_resolution" ) & +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & am_sleep_pid=$! -]) +fi AC_CONFIG_COMMANDS_PRE( [AC_MSG_CHECKING([that generated files are newer than configure]) if test -n "$am_sleep_pid"; then @@ -10249,18 +10000,18 @@ rm -f conftest.file ]) -# Copyright (C) 2009-2024 Free Software Foundation, Inc. +# Copyright (C) 2009-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# _AM_SILENT_RULES -# ---------------- -# Enable less verbose build rules support. -AC_DEFUN([_AM_SILENT_RULES], -[AM_DEFAULT_VERBOSITY=1 -AC_ARG_ENABLE([silent-rules], [dnl +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl AS_HELP_STRING( [--enable-silent-rules], [less verbose build output (undo: "make V=1")]) @@ -10268,6 +10019,11 @@ [--disable-silent-rules], [verbose build output (undo: "make V=0")])dnl ]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac dnl dnl A few 'make' implementations (e.g., NonStop OS and NextStep) dnl do not support nested variable expansions. @@ -10286,21 +10042,6 @@ else am_cv_make_support_nested_variables=no fi]) -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -dnl Delay evaluation of AM_DEFAULT_VERBOSITY to the end to allow multiple calls -dnl to AM_SILENT_RULES to change the default value. -AC_CONFIG_COMMANDS_PRE([dnl -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; -esac if test $am_cv_make_support_nested_variables = yes; then dnl Using '$V' instead of '$(V)' breaks IRIX make. AM_V='$(V)' @@ -10309,18 +10050,17 @@ AM_V=$AM_DEFAULT_VERBOSITY AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY fi -])dnl +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Set the default verbosity level to DEFAULT ("yes" being less verbose, "no" or -# empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_REQUIRE([_AM_SILENT_RULES]) -AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1])]) - -# Copyright (C) 2001-2024 Free Software Foundation, Inc. +# Copyright (C) 2001-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10348,7 +10088,7 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2024 Free Software Foundation, Inc. +# Copyright (C) 2006-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10367,7 +10107,7 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2024 Free Software Foundation, Inc. +# Copyright (C) 2004-2021 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10413,19 +10153,15 @@ am_uid=`id -u || echo unknown` am_gid=`id -g || echo unknown` AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test x$am_uid = xunknown; then - AC_MSG_WARN([ancient id detected; assuming current UID is ok, but dist-ustar might not work]) - elif test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) else - AC_MSG_RESULT([no]) - _am_tools=none + AC_MSG_RESULT([no]) + _am_tools=none fi AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test x$gm_gid = xunknown; then - AC_MSG_WARN([ancient id detected; assuming current GID is ok, but dist-ustar might not work]) - elif test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) _am_tools=none @@ -10502,23 +10238,3 @@ AC_SUBST([am__untar]) ]) # _AM_PROG_TAR -# Copyright (C) 2022-2024 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_XARGS_N -# ---------------- -# Check whether 'xargs -n' works. It should work everywhere, so the fallback -# is not optimized at all as we never expect to use it. -AC_DEFUN([_AM_PROG_XARGS_N], -[AC_CACHE_CHECK([xargs -n works], am_cv_xargs_n_works, [dnl -AS_IF([test "`echo 1 2 3 | xargs -n2 echo`" = "1 2 -3"], [am_cv_xargs_n_works=yes], [am_cv_xargs_n_works=no])]) -AS_IF([test "$am_cv_xargs_n_works" = yes], [am__xargs_n='xargs -n'], [dnl - am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "$@" "$am__xargs_n_arg"; done; }' -])dnl -AC_SUBST(am__xargs_n) -]) -
diff --git a/config/compile b/config/compile index 49b3d05..df363c8 100755 --- a/config/compile +++ b/config/compile
@@ -1,9 +1,9 @@ #! /bin/sh # Wrapper for compilers which do not understand '-c -o'. -scriptversion=2024-06-19.01; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1999-2024 Free Software Foundation, Inc. +# Copyright (C) 1999-2021 Free Software Foundation, Inc. # Written by Tom Tromey <tromey@cygnus.com>. # # This program is free software; you can redistribute it and/or modify @@ -143,7 +143,7 @@ # configure might choose to run compile as 'compile cc -o foo foo.c'. eat=1 case $2 in - *.o | *.lo | *.[oO][bB][jJ]) + *.o | *.[oO][bB][jJ]) func_file_conv "$2" set x "$@" -Fo"$file" shift @@ -248,17 +248,14 @@ right script to run: please start by reading the file 'INSTALL'. Report bugs to <bug-automake@gnu.org>. -GNU Automake home page: <https://www.gnu.org/software/automake/>. -General help using GNU software: <https://www.gnu.org/gethelp/>. EOF exit $? ;; -v | --v*) - echo "compile (GNU Automake) $scriptversion" + echo "compile $scriptversion" exit $? ;; cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ - clang-cl | *[/\\]clang-cl | clang-cl.exe | *[/\\]clang-cl.exe | \ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) func_cl_wrapper "$@" # Doesn't return... ;;
diff --git a/config/config.guess b/config/config.guess index f6d217a..7f76b62 100755 --- a/config/config.guess +++ b/config/config.guess
@@ -1,10 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2024 Free Software Foundation, Inc. +# Copyright 1992-2022 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale -timestamp='2024-01-01' +timestamp='2022-01-09' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -47,7 +47,7 @@ usage="\ Usage: $0 [OPTION] -Output the configuration name of the system '$me' is run on. +Output the configuration name of the system \`$me' is run on. Options: -h, --help print this help, then exit @@ -60,13 +60,13 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2024 Free Software Foundation, Inc. +Copyright 1992-2022 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" -Try '$me --help' for more information." +Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do @@ -102,8 +102,8 @@ # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. -# Historically, 'CC_FOR_BUILD' used to be named 'HOST_CC'. We still -# use 'HOST_CC' if defined, but it is deprecated. +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. @@ -155,9 +155,6 @@ set_cc_for_build cat <<-EOF > "$dummy.c" - #if defined(__ANDROID__) - LIBC=android - #else #include <features.h> #if defined(__UCLIBC__) LIBC=uclibc @@ -165,8 +162,6 @@ LIBC=dietlibc #elif defined(__GLIBC__) LIBC=gnu - #elif defined(__LLVM_LIBC__) - LIBC=llvm #else #include <stdarg.h> /* First heuristic to detect musl libc. */ @@ -174,7 +169,6 @@ LIBC=musl #endif #endif - #endif EOF cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` eval "$cc_set_libc" @@ -465,7 +459,7 @@ UNAME_RELEASE=`uname -v` ;; esac - # Japanese Language versions have a version number like '4.1.3-JL'. + # Japanese Language versions have a version number like `4.1.3-JL'. SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'` GUESS=sparc-sun-sunos$SUN_REL ;; @@ -910,7 +904,7 @@ fi ;; *:FreeBSD:*:*) - UNAME_PROCESSOR=`uname -p` + UNAME_PROCESSOR=`/usr/bin/uname -p` case $UNAME_PROCESSOR in amd64) UNAME_PROCESSOR=x86_64 ;; @@ -972,37 +966,11 @@ GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'` GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC ;; - x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*) - GUESS="$UNAME_MACHINE-pc-managarm-mlibc" - ;; - *:[Mm]anagarm:*:*) - GUESS="$UNAME_MACHINE-unknown-managarm-mlibc" - ;; *:Minix:*:*) GUESS=$UNAME_MACHINE-unknown-minix ;; aarch64:Linux:*:*) - set_cc_for_build - CPU=$UNAME_MACHINE - LIBCABI=$LIBC - if test "$CC_FOR_BUILD" != no_compiler_found; then - ABI=64 - sed 's/^ //' << EOF > "$dummy.c" - #ifdef __ARM_EABI__ - #ifdef __ARM_PCS_VFP - ABI=eabihf - #else - ABI=eabi - #endif - #endif -EOF - cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` - eval "$cc_set_abi" - case $ABI in - eabi | eabihf) CPU=armv8l; LIBCABI=$LIBC$ABI ;; - esac - fi - GUESS=$CPU-unknown-linux-$LIBCABI + GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be @@ -1068,16 +1036,7 @@ k1om:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; - kvx:Linux:*:*) - GUESS=$UNAME_MACHINE-unknown-linux-$LIBC - ;; - kvx:cos:*:*) - GUESS=$UNAME_MACHINE-unknown-cos - ;; - kvx:mbr:*:*) - GUESS=$UNAME_MACHINE-unknown-mbr - ;; - loongarch32:Linux:*:* | loongarch64:Linux:*:*) + loongarch32:Linux:*:* | loongarch64:Linux:*:* | loongarchx32:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC ;; m32r*:Linux:*:*) @@ -1192,27 +1151,16 @@ ;; x86_64:Linux:*:*) set_cc_for_build - CPU=$UNAME_MACHINE LIBCABI=$LIBC if test "$CC_FOR_BUILD" != no_compiler_found; then - ABI=64 - sed 's/^ //' << EOF > "$dummy.c" - #ifdef __i386__ - ABI=x86 - #else - #ifdef __ILP32__ - ABI=x32 - #endif - #endif -EOF - cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'` - eval "$cc_set_abi" - case $ABI in - x86) CPU=i686 ;; - x32) LIBCABI=${LIBC}x32 ;; - esac + if (echo '#ifdef __ILP32__'; echo IS_X32; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_X32 >/dev/null + then + LIBCABI=${LIBC}x32 + fi fi - GUESS=$CPU-pc-linux-$LIBCABI + GUESS=$UNAME_MACHINE-pc-linux-$LIBCABI ;; xtensa*:Linux:*:*) GUESS=$UNAME_MACHINE-unknown-linux-$LIBC @@ -1232,7 +1180,7 @@ GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION ;; i*86:OS/2:*:*) - # If we were able to find 'uname', then EMX Unix compatibility + # If we were able to find `uname', then EMX Unix compatibility # is probably installed. GUESS=$UNAME_MACHINE-pc-os2-emx ;; @@ -1373,7 +1321,7 @@ GUESS=ns32k-sni-sysv fi ;; - PENTIUM:*:4.0*:*) # Unisys 'ClearPath HMP IX 4000' SVR4/MP effort + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says <Richard.M.Bartel@ccMail.Census.GOV> GUESS=i586-unisys-sysv4 ;; @@ -1419,11 +1367,8 @@ BePC:Haiku:*:*) # Haiku running on Intel PC compatible. GUESS=i586-pc-haiku ;; - ppc:Haiku:*:*) # Haiku running on Apple PowerPC - GUESS=powerpc-apple-haiku - ;; - *:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat) - GUESS=$UNAME_MACHINE-unknown-haiku + x86_64:Haiku:*:*) + GUESS=x86_64-unknown-haiku ;; SX-4:SUPER-UX:*:*) GUESS=sx4-nec-superux$UNAME_RELEASE @@ -1595,9 +1540,6 @@ *:Unleashed:*:*) GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE ;; - *:Ironclad:*:*) - GUESS=$UNAME_MACHINE-unknown-ironclad - ;; esac # Do we have a guess based on uname results?
diff --git a/config/config.sub b/config/config.sub index 2c6a07a..dba16e8 100755 --- a/config/config.sub +++ b/config/config.sub
@@ -1,10 +1,10 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright 1992-2024 Free Software Foundation, Inc. +# Copyright 1992-2022 Free Software Foundation, Inc. # shellcheck disable=SC2006,SC2268 # see below for rationale -timestamp='2024-01-01' +timestamp='2022-01-03' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -76,13 +76,13 @@ version="\ GNU config.sub ($timestamp) -Copyright 1992-2024 Free Software Foundation, Inc. +Copyright 1992-2022 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" -Try '$me --help' for more information." +Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do @@ -130,7 +130,7 @@ # Separate into logical components for further validation case $1 in *-*-*-*-*) - echo "Invalid configuration '$1': more than four components" >&2 + echo Invalid configuration \`"$1"\': more than four components >&2 exit 1 ;; *-*-*-*) @@ -145,8 +145,7 @@ nto-qnx* | linux-* | uclinux-uclibc* \ | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ - | storm-chaos* | os2-emx* | rtmk-nova* | managarm-* \ - | windows-* ) + | storm-chaos* | os2-emx* | rtmk-nova*) basic_machine=$field1 basic_os=$maybe_os ;; @@ -944,7 +943,7 @@ EOF IFS=$saved_IFS ;; - # We use 'pc' rather than 'unknown' + # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) @@ -1076,7 +1075,7 @@ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) cpu=i586 ;; - pentiumpro-* | p6-* | 6x86-* | athlon-* | athlon_*-*) + pentiumpro-* | p6-* | 6x86-* | athlon-* | athalon_*-*) cpu=i686 ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) @@ -1181,7 +1180,7 @@ case $cpu in 1750a | 580 \ | a29k \ - | aarch64 | aarch64_be | aarch64c | arm64ec \ + | aarch64 | aarch64_be \ | abacus \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] \ @@ -1200,29 +1199,50 @@ | d10v | d30v | dlx | dsp16xx \ | e2k | elxsi | epiphany \ | f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \ - | javascript \ | h8300 | h8500 \ | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ | i370 | i*86 | i860 | i960 | ia16 | ia64 \ | ip2k | iq2000 \ | k1om \ - | kvx \ | le32 | le64 \ | lm32 \ - | loongarch32 | loongarch64 \ + | loongarch32 | loongarch64 | loongarchx32 \ | m32c | m32r | m32rle \ | m5200 | m68000 | m680[012346]0 | m68360 | m683?2 | m68k \ | m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \ | m88110 | m88k | maxq | mb | mcore | mep | metag \ | microblaze | microblazeel \ - | mips* \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64eb | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa32r3 | mipsisa32r3el \ + | mipsisa32r5 | mipsisa32r5el \ + | mipsisa32r6 | mipsisa32r6el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64r3 | mipsisa64r3el \ + | mipsisa64r5 | mipsisa64r5el \ + | mipsisa64r6 | mipsisa64r6el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipsr5900 | mipsr5900el \ + | mipstx39 | mipstx39el \ | mmix \ | mn10200 | mn10300 \ | moxie \ | mt \ | msp430 \ - | nanomips* \ | nds32 | nds32le | nds32be \ | nfp \ | nios | nios2 | nios2eb | nios2el \ @@ -1254,7 +1274,6 @@ | ubicom32 \ | v70 | v850 | v850e | v850e1 | v850es | v850e2 | v850e2v3 \ | vax \ - | vc4 \ | visium \ | w65 \ | wasm32 | wasm64 \ @@ -1266,7 +1285,7 @@ ;; *) - echo "Invalid configuration '$1': machine '$cpu-$vendor' not recognized" 1>&2 + echo Invalid configuration \`"$1"\': machine \`"$cpu-$vendor"\' not recognized 1>&2 exit 1 ;; esac @@ -1287,12 +1306,11 @@ # Decode manufacturer-specific aliases for certain operating systems. -if test x"$basic_os" != x +if test x$basic_os != x then # First recognize some ad-hoc cases, or perhaps split kernel-os, or else just # set os. -obj= case $basic_os in gnu/linux*) kernel=linux @@ -1323,10 +1341,6 @@ kernel=linux os=`echo "$basic_os" | sed -e 's|linux|gnu|'` ;; - managarm*) - kernel=managarm - os=`echo "$basic_os" | sed -e 's|managarm|mlibc|'` - ;; *) kernel= os=$basic_os @@ -1492,16 +1506,10 @@ os=eabi ;; *) - os= - obj=elf + os=elf ;; esac ;; - aout* | coff* | elf* | pe*) - # These are machine code file formats, not OSes - obj=$os - os= - ;; *) # No normalization, but not necessarily accepted, that comes below. ;; @@ -1520,15 +1528,12 @@ # system, and we'll never get to this point. kernel= -obj= case $cpu-$vendor in score-*) - os= - obj=elf + os=elf ;; spu-*) - os= - obj=elf + os=elf ;; *-acorn) os=riscix1.2 @@ -1538,35 +1543,28 @@ os=gnu ;; arm*-semi) - os= - obj=aout + os=aout ;; c4x-* | tic4x-*) - os= - obj=coff + os=coff ;; c8051-*) - os= - obj=elf + os=elf ;; clipper-intergraph) os=clix ;; hexagon-*) - os= - obj=elf + os=elf ;; tic54x-*) - os= - obj=coff + os=coff ;; tic55x-*) - os= - obj=coff + os=coff ;; tic6x-*) - os= - obj=coff + os=coff ;; # This must come before the *-dec entry. pdp10-*) @@ -1588,24 +1586,19 @@ os=sunos3 ;; m68*-cisco) - os= - obj=aout + os=aout ;; mep-*) - os= - obj=elf + os=elf ;; mips*-cisco) - os= - obj=elf + os=elf ;; - mips*-*|nanomips*-*) - os= - obj=elf + mips*-*) + os=elf ;; or32-*) - os= - obj=coff + os=coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=sysv3 @@ -1614,8 +1607,7 @@ os=sunos4.1.1 ;; pru-*) - os= - obj=elf + os=elf ;; *-be) os=beos @@ -1696,12 +1688,10 @@ os=uxpv ;; *-rom68k) - os= - obj=coff + os=coff ;; *-*bug) - os= - obj=coff + os=coff ;; *-apple) os=macos @@ -1719,11 +1709,10 @@ fi -# Now, validate our (potentially fixed-up) individual pieces (OS, OBJ). - +# Now, validate our (potentially fixed-up) OS. case $os in # Sometimes we do "kernel-libc", so those need to count as OSes. - llvm* | musl* | newlib* | relibc* | uclibc*) + musl* | newlib* | relibc* | uclibc*) ;; # Likewise for "kernel-abi" eabi* | gnueabi*) @@ -1731,9 +1720,6 @@ # VxWorks passes extra cpu info in the 4th filed. simlinux | simwindows | spe) ;; - # See `case $cpu-$os` validation below - ghcjs) - ;; # Now accept the basic system types. # The portable systems comes first. # Each alternative MUST end in a * to match a version number. @@ -1742,7 +1728,7 @@ | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ | sym* | plan9* | psp* | sim* | xray* | os68k* | v88r* \ | hiux* | abug | nacl* | netware* | windows* \ - | os9* | macos* | osx* | ios* | tvos* | watchos* \ + | os9* | macos* | osx* | ios* \ | mpw* | magic* | mmixware* | mon960* | lnews* \ | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ | aos* | aros* | cloudabi* | sortix* | twizzler* \ @@ -1751,11 +1737,11 @@ | mirbsd* | netbsd* | dicos* | openedition* | ose* \ | bitrig* | openbsd* | secbsd* | solidbsd* | libertybsd* | os108* \ | ekkobsd* | freebsd* | riscix* | lynxos* | os400* \ - | bosx* | nextstep* | cxux* | oabi* \ - | ptx* | ecoff* | winnt* | domain* | vsta* \ + | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ + | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ | udi* | lites* | ieee* | go32* | aux* | hcos* \ | chorusrdb* | cegcc* | glidix* | serenity* \ - | cygwin* | msys* | moss* | proelf* | rtems* \ + | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ | midipix* | mingw32* | mingw64* | mint* \ | uxpv* | beos* | mpeix* | udk* | moxiebox* \ | interix* | uwin* | mks* | rhapsody* | darwin* \ @@ -1768,116 +1754,49 @@ | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \ | nsk* | powerunix* | genode* | zvmoe* | qnx* | emx* | zephyr* \ - | fiwix* | mlibc* | cos* | mbr* | ironclad* ) + | fiwix* ) ;; # This one is extra strict with allowed versions sco3.2v2 | sco3.2v[4-9]* | sco5v6*) # Don't forget version if it is 3.2v4 or newer. ;; - # This refers to builds using the UEFI calling convention - # (which depends on the architecture) and PE file format. - # Note that this is both a different calling convention and - # different file format than that of GNU-EFI - # (x86_64-w64-mingw32). - uefi) - ;; none) ;; - kernel* | msvc* ) - # Restricted further below - ;; - '') - if test x"$obj" = x - then - echo "Invalid configuration '$1': Blank OS only allowed with explicit machine code file format" 1>&2 - fi - ;; *) - echo "Invalid configuration '$1': OS '$os' not recognized" 1>&2 - exit 1 - ;; -esac - -case $obj in - aout* | coff* | elf* | pe*) - ;; - '') - # empty is fine - ;; - *) - echo "Invalid configuration '$1': Machine code format '$obj' not recognized" 1>&2 - exit 1 - ;; -esac - -# Here we handle the constraint that a (synthetic) cpu and os are -# valid only in combination with each other and nowhere else. -case $cpu-$os in - # The "javascript-unknown-ghcjs" triple is used by GHC; we - # accept it here in order to tolerate that, but reject any - # variations. - javascript-ghcjs) - ;; - javascript-* | *-ghcjs) - echo "Invalid configuration '$1': cpu '$cpu' is not valid with os '$os$obj'" 1>&2 + echo Invalid configuration \`"$1"\': OS \`"$os"\' not recognized 1>&2 exit 1 ;; esac # As a final step for OS-related things, validate the OS-kernel combination # (given a valid OS), if there is a kernel. -case $kernel-$os-$obj in - linux-gnu*- | linux-android*- | linux-dietlibc*- | linux-llvm*- \ - | linux-mlibc*- | linux-musl*- | linux-newlib*- \ - | linux-relibc*- | linux-uclibc*- ) +case $kernel-$os in + linux-gnu* | linux-dietlibc* | linux-android* | linux-newlib* \ + | linux-musl* | linux-relibc* | linux-uclibc* ) ;; - uclinux-uclibc*- ) + uclinux-uclibc* ) ;; - managarm-mlibc*- | managarm-kernel*- ) - ;; - windows*-msvc*-) - ;; - -dietlibc*- | -llvm*- | -mlibc*- | -musl*- | -newlib*- | -relibc*- \ - | -uclibc*- ) + -dietlibc* | -newlib* | -musl* | -relibc* | -uclibc* ) # These are just libc implementations, not actual OSes, and thus # require a kernel. - echo "Invalid configuration '$1': libc '$os' needs explicit kernel." 1>&2 + echo "Invalid configuration \`$1': libc \`$os' needs explicit kernel." 1>&2 exit 1 ;; - -kernel*- ) - echo "Invalid configuration '$1': '$os' needs explicit kernel." 1>&2 - exit 1 + kfreebsd*-gnu* | kopensolaris*-gnu*) ;; - *-kernel*- ) - echo "Invalid configuration '$1': '$kernel' does not support '$os'." 1>&2 - exit 1 + vxworks-simlinux | vxworks-simwindows | vxworks-spe) ;; - *-msvc*- ) - echo "Invalid configuration '$1': '$os' needs 'windows'." 1>&2 - exit 1 + nto-qnx*) ;; - kfreebsd*-gnu*- | kopensolaris*-gnu*-) + os2-emx) ;; - vxworks-simlinux- | vxworks-simwindows- | vxworks-spe-) + *-eabi* | *-gnueabi*) ;; - nto-qnx*-) - ;; - os2-emx-) - ;; - *-eabi*- | *-gnueabi*-) - ;; - none--*) - # None (no kernel, i.e. freestanding / bare metal), - # can be paired with an machine code file format - ;; - -*-) + -*) # Blank kernel with real OS is always fine. ;; - --*) - # Blank kernel and OS with real machine code file format is always fine. - ;; - *-*-*) - echo "Invalid configuration '$1': Kernel '$kernel' not known to work with OS '$os'." 1>&2 + *-*) + echo "Invalid configuration \`$1': Kernel \`$kernel' not known to work with OS \`$os'." 1>&2 exit 1 ;; esac @@ -1960,7 +1879,7 @@ ;; esac -echo "$cpu-$vendor${kernel:+-$kernel}${os:+-$os}${obj:+-$obj}" +echo "$cpu-$vendor-${kernel:+$kernel-}$os" exit # Local variables:
diff --git a/config/depcomp b/config/depcomp index 1f0aa97..715e343 100755 --- a/config/depcomp +++ b/config/depcomp
@@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2024-06-19.01; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1999-2024 Free Software Foundation, Inc. +# Copyright (C) 1999-2021 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -47,13 +47,11 @@ libtool Whether libtool is used (yes/no). Report bugs to <bug-automake@gnu.org>. -GNU Automake home page: <https://www.gnu.org/software/automake/>. -General help using GNU software: <https://www.gnu.org/gethelp/>. EOF exit $? ;; -v | --v*) - echo "depcomp (GNU Automake) $scriptversion" + echo "depcomp $scriptversion" exit $? ;; esac @@ -115,6 +113,7 @@ # These definitions help. upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ lower=abcdefghijklmnopqrstuvwxyz +digits=0123456789 alpha=${upper}${lower} if test -z "$depmode" || test -z "$source" || test -z "$object"; then @@ -129,7 +128,7 @@ rm -f "$tmpdepfile" -# Avoid interference from the environment. +# Avoid interferences from the environment. gccflag= dashmflag= # Some modes work just like other modes, but use different flags. We @@ -199,8 +198,8 @@ ;; gcc) -## Note that this doesn't just cater to obsolete pre-3.x GCC compilers. -## but also to in-use compilers like IBM xlc/xlC and the HP C compiler. +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. ## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method:
diff --git a/config/install-sh b/config/install-sh index b1d7a6f..ec298b5 100755 --- a/config/install-sh +++ b/config/install-sh
@@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2024-06-19.01; # UTC +scriptversion=2020-11-14.01; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -124,9 +124,9 @@ If -S is not specified, no backups are attempted. -Report bugs to <bug-automake@gnu.org>. -GNU Automake home page: <https://www.gnu.org/software/automake/>. -General help using GNU software: <https://www.gnu.org/gethelp/>." +Email bug reports to bug-automake@gnu.org. +Automake home page: https://www.gnu.org/software/automake/ +" while test $# -ne 0; do case $1 in @@ -170,7 +170,7 @@ -T) is_target_a_directory=never;; - --version) echo "$0 (GNU Automake) $scriptversion"; exit $?;; + --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; @@ -345,7 +345,7 @@ ' 0 # Because "mkdir -p" follows existing symlinks and we likely work - # directly in world-writable /tmp, make sure that the '$tmpdir' + # directly in world-writeable /tmp, make sure that the '$tmpdir' # directory is successfully created first before we actually test # 'mkdir -p'. if (umask $mkdir_umask && @@ -353,7 +353,7 @@ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { - # Check for POSIX incompatibility with -m. + # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
diff --git a/config/ltmain.sh b/config/ltmain.sh old mode 100644 new mode 100755 index 3e6a3db..540a92a --- a/config/ltmain.sh +++ b/config/ltmain.sh
@@ -1,12 +1,12 @@ -#! /usr/bin/env sh +#! /bin/sh ## DO NOT EDIT - This file generated from ./build-aux/ltmain.in -## by inline-source v2019-02-19.15 +## by inline-source v2014-01-03.01 -# libtool (GNU libtool) 2.5.4 +# libtool (GNU libtool) 2.4.6 # Provide generalized library-building support services. # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# Copyright (C) 1996-2019, 2021-2024 Free Software Foundation, Inc. +# Copyright (C) 1996-2015 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -31,8 +31,8 @@ PROGRAM=libtool PACKAGE=libtool -VERSION=2.5.4 -package_revision=2.5.4 +VERSION="2.4.6 Debian-2.4.6-15build2" +package_revision=2.4.6 ## ------ ## @@ -64,25 +64,34 @@ # libraries, which are installed to $pkgauxdir. # Set a version string for this script. -scriptversion=2019-02-19.15; # UTC +scriptversion=2015-01-20.17; # UTC # General shell script boiler plate, and helper functions. # Written by Gary V. Vaughan, 2004 -# This is free software. There is NO warranty; not even for -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -# -# Copyright (C) 2004-2019, 2021, 2023-2024 Bootstrap Authors -# -# This file is dual licensed under the terms of the MIT license -# <https://opensource.org/licenses/MIT>, and GPL version 2 or later -# <https://www.gnu.org/licenses/gpl-2.0.html>. You must apply one of -# these licenses when using or redistributing this software or any of -# the files within it. See the URLs above, or the file `LICENSE` -# included in the Bootstrap distribution for the full license texts. +# Copyright (C) 2004-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -# Please report bugs or propose patches to: -# <https://github.com/gnulib-modules/bootstrap/issues> +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. + +# As a special exception to the GNU General Public License, if you distribute +# this file as part of a program or library that is built using GNU Libtool, +# you may include this file under the same distribution terms that you use +# for the rest of that program. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Please report bugs or propose patches to gary@gnu.org. ## ------ ## @@ -130,12 +139,9 @@ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\" fi" done -# These NLS vars are set unconditionally (bootstrap issue #24). Unset those -# in case the environment reset is needed later and the $save_* variant is not -# defined (see the code above). -LC_ALL=C -LANGUAGE=C -export LANGUAGE LC_ALL + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Make sure IFS has a sensible default sp=' ' @@ -143,7 +149,7 @@ ' IFS="$sp $nl" -# There are apparently some systems that use ';' as a PATH separator! +# There are apparently some retarded systems that use ';' as a PATH separator! if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { @@ -153,26 +159,6 @@ fi -# func_unset VAR -# -------------- -# Portably unset VAR. -# In some shells, an 'unset VAR' statement leaves a non-zero return -# status if VAR is already unset, which might be problematic if the -# statement is used at the end of a function (thus poisoning its return -# value) or when 'set -e' is active (causing even a spurious abort of -# the script in this case). -func_unset () -{ - { eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; } -} - - -# Make sure CDPATH doesn't cause `cd` commands to output the target dir. -func_unset CDPATH - -# Make sure ${,E,F}GREP behave sanely. -func_unset GREP_OPTIONS - ## ------------------------- ## ## Locate command utilities. ## @@ -273,7 +259,7 @@ rm -f conftest.in conftest.tmp conftest.nl conftest.out } - func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin" + func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin rm -f conftest.sed SED=$func_path_progs_result } @@ -309,7 +295,7 @@ rm -f conftest.in conftest.tmp conftest.nl conftest.out } - func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin" + func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin GREP=$func_path_progs_result } @@ -374,35 +360,6 @@ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g s/\n//g" -# require_check_ifs_backslash -# --------------------------- -# Check if we can use backslash as IFS='\' separator, and set -# $check_ifs_backshlash_broken to ':' or 'false'. -require_check_ifs_backslash=func_require_check_ifs_backslash -func_require_check_ifs_backslash () -{ - _G_save_IFS=$IFS - IFS='\' - _G_check_ifs_backshlash='a\\b' - for _G_i in $_G_check_ifs_backshlash - do - case $_G_i in - a) - check_ifs_backshlash_broken=false - ;; - '') - break - ;; - *) - check_ifs_backshlash_broken=: - break - ;; - esac - done - IFS=$_G_save_IFS - require_check_ifs_backslash=: -} - ## ----------------- ## ## Global variables. ## @@ -430,7 +387,7 @@ # putting '$debug_cmd' at the start of all your functions, you can get # bash to show function call trace with: # -# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name +# debug_cmd='echo "${FUNCNAME[0]} $*" >&2' bash your-script-name debug_cmd=${debug_cmd-":"} exit_cmd=: @@ -589,7 +546,7 @@ # _G_HAVE_PLUSEQ_OP # Can be empty, in which case the shell is probed, "yes" if += is - # usable or anything else if it does not work. + # useable or anything else if it does not work. test -z "$_G_HAVE_PLUSEQ_OP" \ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \ && _G_HAVE_PLUSEQ_OP=yes @@ -623,16 +580,16 @@ { $debug_cmd - func_quote_arg pretty "$2" - eval "$1+=\\ \$func_quote_arg_result" + func_quote_for_eval "$2" + eval "$1+=\\ \$func_quote_for_eval_result" }' else func_append_quoted () { $debug_cmd - func_quote_arg pretty "$2" - eval "$1=\$$1\\ \$func_quote_arg_result" + func_quote_for_eval "$2" + eval "$1=\$$1\\ \$func_quote_for_eval_result" } fi @@ -739,7 +696,7 @@ # to NONDIR_REPLACEMENT. # value returned in "$func_dirname_result" # basename: Compute filename of FILE. -# value returned in "$func_basename_result" +# value retuned in "$func_basename_result" # For efficiency, we do not delegate to the functions above but instead # duplicate the functionality here. eval 'func_dirname_and_basename () @@ -897,7 +854,7 @@ # While some portion of DIR does not yet exist... while test ! -d "$_G_directory_path"; do # ...make a list in topmost first order. Use a colon delimited - # list in case some portion of path contains whitespace. + # list incase some portion of path contains whitespace. _G_dir_list=$_G_directory_path:$_G_dir_list # If the last portion added has no slash in it, the list is done @@ -1134,206 +1091,88 @@ } -# func_quote_portable EVAL ARG -# ---------------------------- -# Internal function to portably implement func_quote_arg. Note that we still -# keep attention to performance here so we as much as possible try to avoid -# calling sed binary (so far O(N) complexity as long as func_append is O(1)). -func_quote_portable () +# func_quote_for_eval ARG... +# -------------------------- +# Aesthetically quote ARGs to be evaled later. +# This function returns two values: +# i) func_quote_for_eval_result +# double-quoted, suitable for a subsequent eval +# ii) func_quote_for_eval_unquoted_result +# has all characters that are still active within double +# quotes backslashified. +func_quote_for_eval () { $debug_cmd - $require_check_ifs_backslash - - func_quote_portable_result=$2 - - # one-time-loop (easy break) - while true - do - if $1; then - func_quote_portable_result=`$ECHO "$2" | $SED \ - -e "$sed_double_quote_subst" -e "$sed_double_backslash"` - break + func_quote_for_eval_unquoted_result= + func_quote_for_eval_result= + while test 0 -lt $#; do + case $1 in + *[\\\`\"\$]*) + _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; + *) + _G_unquoted_arg=$1 ;; + esac + if test -n "$func_quote_for_eval_unquoted_result"; then + func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" + else + func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" fi - # Quote for eval. - case $func_quote_portable_result in - *[\\\`\"\$]*) - # Fallback to sed for $func_check_bs_ifs_broken=:, or when the string - # contains the shell wildcard characters. - case $check_ifs_backshlash_broken$func_quote_portable_result in - :*|*[\[\*\?]*) - func_quote_portable_result=`$ECHO "$func_quote_portable_result" \ - | $SED "$sed_quote_subst"` - break - ;; - esac - - func_quote_portable_old_IFS=$IFS - for _G_char in '\' '`' '"' '$' - do - # STATE($1) PREV($2) SEPARATOR($3) - set start "" "" - func_quote_portable_result=dummy"$_G_char$func_quote_portable_result$_G_char"dummy - IFS=$_G_char - for _G_part in $func_quote_portable_result - do - case $1 in - quote) - func_append func_quote_portable_result "$3$2" - set quote "$_G_part" "\\$_G_char" - ;; - start) - set first "" "" - func_quote_portable_result= - ;; - first) - set quote "$_G_part" "" - ;; - esac - done - done - IFS=$func_quote_portable_old_IFS - ;; - *) ;; - esac - break - done - - func_quote_portable_unquoted_result=$func_quote_portable_result - case $func_quote_portable_result in - # double-quote args containing shell metacharacters to delay - # word splitting, command substitution and variable expansion - # for a subsequent eval. - # many bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_portable_result=\"$func_quote_portable_result\" - ;; - esac -} - - -# func_quotefast_eval ARG -# ----------------------- -# Quote one ARG (internal). This is equivalent to 'func_quote_arg eval ARG', -# but optimized for speed. Result is stored in $func_quotefast_eval. -if test xyes = `(x=; printf -v x %q yes; echo x"$x") 2>/dev/null`; then - printf -v _GL_test_printf_tilde %q '~' - if test '\~' = "$_GL_test_printf_tilde"; then - func_quotefast_eval () - { - printf -v func_quotefast_eval_result %q "$1" - } - else - # Broken older Bash implementations. Make those faster too if possible. - func_quotefast_eval () - { - case $1 in - '~'*) - func_quote_portable false "$1" - func_quotefast_eval_result=$func_quote_portable_result + case $_G_unquoted_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_quoted_arg=\"$_G_unquoted_arg\" ;; *) - printf -v func_quotefast_eval_result %q "$1" - ;; + _G_quoted_arg=$_G_unquoted_arg + ;; esac - } - fi -else - func_quotefast_eval () - { - func_quote_portable false "$1" - func_quotefast_eval_result=$func_quote_portable_result - } -fi - -# func_quote_arg MODEs ARG -# ------------------------ -# Quote one ARG to be evaled later. MODEs argument may contain zero or more -# specifiers listed below separated by ',' character. This function returns two -# values: -# i) func_quote_arg_result -# double-quoted (when needed), suitable for a subsequent eval -# ii) func_quote_arg_unquoted_result -# has all characters that are still active within double -# quotes backslashified. Available only if 'unquoted' is specified. -# -# Available modes: -# ---------------- -# 'eval' (default) -# - escape shell special characters -# 'expand' -# - the same as 'eval'; but do not quote variable references -# 'pretty' -# - request aesthetic output, i.e. '"a b"' instead of 'a\ b'. This might -# be used later in func_quote to get output like: 'echo "a b"' instead -# of 'echo a\ b'. This is slower than default on some shells. -# 'unquoted' -# - produce also $func_quote_arg_unquoted_result which does not contain -# wrapping double-quotes. -# -# Examples for 'func_quote_arg pretty,unquoted string': -# -# string | *_result | *_unquoted_result -# ------------+-----------------------+------------------- -# " | \" | \" -# a b | "a b" | a b -# "a b" | "\"a b\"" | \"a b\" -# * | "*" | * -# z="${x-$y}" | "z=\"\${x-\$y}\"" | z=\"\${x-\$y}\" -# -# Examples for 'func_quote_arg pretty,unquoted,expand string': -# -# string | *_result | *_unquoted_result -# --------------+---------------------+-------------------- -# z="${x-$y}" | "z=\"${x-$y}\"" | z=\"${x-$y}\" -func_quote_arg () -{ - _G_quote_expand=false - case ,$1, in - *,expand,*) - _G_quote_expand=: - ;; - esac - - case ,$1, in - *,pretty,*|*,expand,*|*,unquoted,*) - func_quote_portable $_G_quote_expand "$2" - func_quote_arg_result=$func_quote_portable_result - func_quote_arg_unquoted_result=$func_quote_portable_unquoted_result - ;; - *) - # Faster quote-for-eval for some shells. - func_quotefast_eval "$2" - func_quote_arg_result=$func_quotefast_eval_result - ;; - esac -} - - -# func_quote MODEs ARGs... -# ------------------------ -# Quote all ARGs to be evaled later and join them into single command. See -# func_quote_arg's description for more info. -func_quote () -{ - $debug_cmd - _G_func_quote_mode=$1 ; shift - func_quote_result= - while test 0 -lt $#; do - func_quote_arg "$_G_func_quote_mode" "$1" - if test -n "$func_quote_result"; then - func_append func_quote_result " $func_quote_arg_result" + if test -n "$func_quote_for_eval_result"; then + func_append func_quote_for_eval_result " $_G_quoted_arg" else - func_append func_quote_result "$func_quote_arg_result" + func_append func_quote_for_eval_result "$_G_quoted_arg" fi shift done } +# func_quote_for_expand ARG +# ------------------------- +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + $debug_cmd + + case $1 in + *[\\\`\"]*) + _G_arg=`$ECHO "$1" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; + *) + _G_arg=$1 ;; + esac + + case $_G_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + _G_arg=\"$_G_arg\" + ;; + esac + + func_quote_for_expand_result=$_G_arg +} + + # func_stripname PREFIX SUFFIX NAME # --------------------------------- # strip PREFIX and SUFFIX from NAME, and store in func_stripname_result. @@ -1376,8 +1215,8 @@ _G_cmd=$1 _G_fail_exp=${2-':'} - func_quote_arg pretty,expand "$_G_cmd" - eval "func_notquiet $func_quote_arg_result" + func_quote_for_expand "$_G_cmd" + eval "func_notquiet $func_quote_for_expand_result" $opt_dry_run || { eval "$_G_cmd" @@ -1402,8 +1241,8 @@ _G_fail_exp=${2-':'} $opt_quiet || { - func_quote_arg expand,pretty "$_G_cmd" - eval "func_echo $func_quote_arg_result" + func_quote_for_expand "$_G_cmd" + eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || { @@ -1530,26 +1369,30 @@ # End: #! /bin/sh +# Set a version string for this script. +scriptversion=2015-10-07.11; # UTC + # A portable, pluggable option parser for Bourne shell. # Written by Gary V. Vaughan, 2010 -# This is free software. There is NO warranty; not even for -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -# -# Copyright (C) 2010-2019, 2021, 2023-2024 Bootstrap Authors -# -# This file is dual licensed under the terms of the MIT license -# <https://opensource.org/licenses/MIT>, and GPL version 2 or later -# <https://www.gnu.org/licenses/gpl-2.0.html>. You must apply one of -# these licenses when using or redistributing this software or any of -# the files within it. See the URLs above, or the file `LICENSE` -# included in the Bootstrap distribution for the full license texts. +# Copyright (C) 2010-2015 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -# Please report bugs or propose patches to: -# <https://github.com/gnulib-modules/bootstrap/issues> +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. -# Set a version string for this script. -scriptversion=2019-02-19.15; # UTC +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# Please report bugs or propose patches to gary@gnu.org. ## ------ ## @@ -1572,7 +1415,7 @@ # # In order for the '--version' option to work, you will need to have a # suitably formatted comment like the one at the top of this file -# starting with '# Written by ' and ending with '# Copyright'. +# starting with '# Written by ' and ending with '# warranty; '. # # For '-h' and '--help' to work, you will also need a one line # description of your script's purpose in a comment directly above the @@ -1584,7 +1427,7 @@ # to display verbose messages only when your user has specified # '--verbose'. # -# After sourcing this file, you can plug in processing for additional +# After sourcing this file, you can plug processing for additional # options by amending the variables from the 'Configuration' section # below, and following the instructions in the 'Option parsing' # section further down. @@ -1633,8 +1476,8 @@ ## ------------------------- ## # This section contains functions for adding, removing, and running hooks -# in the main code. A hook is just a list of function names that can be -# run in order later on. +# to the main code. A hook is just a named list of of function, that can +# be run in order later on. # func_hookable FUNC_NAME # ----------------------- @@ -1667,8 +1510,7 @@ # func_remove_hook FUNC_NAME HOOK_FUNC # ------------------------------------ -# Remove HOOK_FUNC from the list of hook functions to be called by -# FUNC_NAME. +# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. func_remove_hook () { $debug_cmd @@ -1677,28 +1519,10 @@ } -# func_propagate_result FUNC_NAME_A FUNC_NAME_B -# --------------------------------------------- -# If the *_result variable of FUNC_NAME_A _is set_, assign its value to -# *_result variable of FUNC_NAME_B. -func_propagate_result () -{ - $debug_cmd - - func_propagate_result_result=: - if eval "test \"\${${1}_result+set}\" = set" - then - eval "${2}_result=\$${1}_result" - else - func_propagate_result_result=false - fi -} - - # func_run_hooks FUNC_NAME [ARG]... # --------------------------------- # Run all hook functions registered to FUNC_NAME. -# It's assumed that the list of hook functions contains nothing more +# It is assumed that the list of hook functions contains nothing more # than a whitespace-delimited list of legal shell function names, and # no effort is wasted trying to catch shell meta-characters or preserve # whitespace. @@ -1706,21 +1530,26 @@ { $debug_cmd + _G_rc_run_hooks=false + case " $hookable_fns " in *" $1 "*) ;; - *) func_fatal_error "'$1' does not support hook functions." ;; + *) func_fatal_error "'$1' does not support hook funcions.n" ;; esac eval _G_hook_fns=\$$1_hooks; shift for _G_hook in $_G_hook_fns; do - func_unset "${_G_hook}_result" - eval $_G_hook '${1+"$@"}' - func_propagate_result $_G_hook func_run_hooks - if $func_propagate_result_result; then - eval set dummy "$func_run_hooks_result"; shift + if eval $_G_hook '"$@"'; then + # store returned options list back into positional + # parameters for next 'cmd' execution. + eval _G_hook_result=\$${_G_hook}_result + eval set dummy "$_G_hook_result"; shift + _G_rc_run_hooks=: fi done + + $_G_rc_run_hooks && func_run_hooks_result=$_G_hook_result } @@ -1730,16 +1559,14 @@ ## --------------- ## # In order to add your own option parsing hooks, you must accept the -# full positional parameter list from your hook function. You may remove -# or edit any options that you action, and then pass back the remaining -# unprocessed options in '<hooked_function_name>_result', escaped -# suitably for 'eval'. -# -# The '<hooked_function_name>_result' variable is automatically unset -# before your hook gets called; for best performance, only set the -# *_result variable when necessary (i.e. don't call the 'func_quote' -# function unnecessarily because it can be an expensive operation on some -# machines). +# full positional parameter list in your hook function, you may remove/edit +# any options that you action, and then pass back the remaining unprocessed +# options in '<hooked_function_name>_result', escaped suitably for +# 'eval'. In this case you also must return $EXIT_SUCCESS to let the +# hook's caller know that it should pay attention to +# '<hooked_function_name>_result'. Returning $EXIT_FAILURE signalizes that +# arguments are left untouched by the hook and therefore caller will ignore the +# result variable. # # Like this: # @@ -1751,8 +1578,11 @@ # usage_message=$usage_message' # -s, --silent don'\''t print informational messages # ' -# # No change in '$@' (ignored completely by this hook). Leave -# # my_options_prep_result variable intact. +# # No change in '$@' (ignored completely by this hook). There is +# # no need to do the equivalent (but slower) action: +# # func_quote_for_eval ${1+"$@"} +# # my_options_prep_result=$func_quote_for_eval_result +# false # } # func_add_hook func_options_prep my_options_prep # @@ -1763,7 +1593,7 @@ # # args_changed=false # -# # Note that, for efficiency, we parse as many options as we can +# # Note that for efficiency, we parse as many options as we can # # recognise in a loop before passing the remainder back to the # # caller on the first unrecognised argument we encounter. # while test $# -gt 0; do @@ -1780,17 +1610,18 @@ # args_changed=: # ;; # *) # Make sure the first unrecognised option "$_G_opt" -# # is added back to "$@" in case we need it later, -# # if $args_changed was set to 'true'. +# # is added back to "$@", we could need that later +# # if $args_changed is true. # set dummy "$_G_opt" ${1+"$@"}; shift; break ;; # esac # done # -# # Only call 'func_quote' here if we processed at least one argument. # if $args_changed; then -# func_quote eval ${1+"$@"} -# my_silent_option_result=$func_quote_result +# func_quote_for_eval ${1+"$@"} +# my_silent_option_result=$func_quote_for_eval_result # fi +# +# $args_changed # } # func_add_hook func_parse_options my_silent_option # @@ -1801,6 +1632,8 @@ # # $opt_silent && $opt_verbose && func_fatal_help "\ # '--silent' and '--verbose' options are mutually exclusive." +# +# false # } # func_add_hook func_validate_options my_option_validation # @@ -1816,8 +1649,13 @@ { $debug_cmd - func_run_hooks func_options ${1+"$@"} - func_propagate_result func_run_hooks func_options_finish + _G_func_options_finish_exit=false + if func_run_hooks func_options ${1+"$@"}; then + func_options_finish_result=$func_run_hooks_result + _G_func_options_finish_exit=: + fi + + $_G_func_options_finish_exit } @@ -1830,27 +1668,28 @@ { $debug_cmd - _G_options_quoted=false + _G_rc_options=false for my_func in options_prep parse_options validate_options options_finish do - func_unset func_${my_func}_result - func_unset func_run_hooks_result - eval func_$my_func '${1+"$@"}' - func_propagate_result func_$my_func func_options - if $func_propagate_result_result; then - eval set dummy "$func_options_result"; shift - _G_options_quoted=: + if eval func_$my_func '${1+"$@"}'; then + eval _G_res_var='$'"func_${my_func}_result" + eval set dummy "$_G_res_var" ; shift + _G_rc_options=: fi done - $_G_options_quoted || { - # As we (func_options) are top-level options-parser function and - # nobody quoted "$@" for us yet, we need to do it explicitly for - # caller. - func_quote eval ${1+"$@"} - func_options_result=$func_quote_result - } + # Save modified positional parameters for caller. As a top-level + # options-parser function we always need to set the 'func_options_result' + # variable (regardless the $_G_rc_options value). + if $_G_rc_options; then + func_options_result=$_G_res_var + else + func_quote_for_eval ${1+"$@"} + func_options_result=$func_quote_for_eval_result + fi + + $_G_rc_options } @@ -1860,7 +1699,8 @@ # Note that when calling hook functions, we pass through the list of # positional parameters. If a hook function modifies that list, and # needs to propagate that back to rest of this script, then the complete -# modified list must be put in 'func_run_hooks_result' before returning. +# modified list must be put in 'func_run_hooks_result' before +# returning $EXIT_SUCCESS (otherwise $EXIT_FAILURE is returned). func_hookable func_options_prep func_options_prep () { @@ -1870,8 +1710,14 @@ opt_verbose=false opt_warning_types= - func_run_hooks func_options_prep ${1+"$@"} - func_propagate_result func_run_hooks func_options_prep + _G_rc_options_prep=false + if func_run_hooks func_options_prep ${1+"$@"}; then + _G_rc_options_prep=: + # save modified positional parameters for caller + func_options_prep_result=$func_run_hooks_result + fi + + $_G_rc_options_prep } @@ -1883,32 +1729,27 @@ { $debug_cmd - _G_parse_options_requote=false + func_parse_options_result= + + _G_rc_parse_options=false # this just eases exit handling while test $# -gt 0; do # Defer to hook functions for initial option parsing, so they # get priority in the event of reusing an option name. - func_run_hooks func_parse_options ${1+"$@"} - func_propagate_result func_run_hooks func_parse_options - if $func_propagate_result_result; then - eval set dummy "$func_parse_options_result"; shift - # Even though we may have changed "$@", we passed the "$@" array - # down into the hook and it quoted it for us (because we are in - # this if-branch). No need to quote it again. - _G_parse_options_requote=false + if func_run_hooks func_parse_options ${1+"$@"}; then + eval set dummy "$func_run_hooks_result"; shift + _G_rc_parse_options=: fi # Break out of the loop if we already parsed every option. test $# -gt 0 || break - # We expect that one of the options parsed in this function matches - # and thus we remove _G_opt from "$@" and need to re-quote. _G_match_parse_options=: _G_opt=$1 shift case $_G_opt in --debug|-x) debug_cmd='set -x' - func_echo "enabling shell trace mode" >&2 + func_echo "enabling shell trace mode" $debug_cmd ;; @@ -1919,7 +1760,7 @@ --warnings|--warning|-W) if test $# = 0 && func_missing_arg $_G_opt; then - _G_parse_options_requote=: + _G_rc_parse_options=: break fi case " $warning_categories $1" in @@ -1974,7 +1815,7 @@ shift ;; - --) _G_parse_options_requote=: ; break ;; + --) _G_rc_parse_options=: ; break ;; -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; *) set dummy "$_G_opt" ${1+"$@"}; shift _G_match_parse_options=false @@ -1982,16 +1823,17 @@ ;; esac - if $_G_match_parse_options; then - _G_parse_options_requote=: - fi + $_G_match_parse_options && _G_rc_parse_options=: done - if $_G_parse_options_requote; then + + if $_G_rc_parse_options; then # save modified positional parameters for caller - func_quote eval ${1+"$@"} - func_parse_options_result=$func_quote_result + func_quote_for_eval ${1+"$@"} + func_parse_options_result=$func_quote_for_eval_result fi + + $_G_rc_parse_options } @@ -2004,14 +1846,21 @@ { $debug_cmd + _G_rc_validate_options=false + # Display all warnings if -W was not given. test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" - func_run_hooks func_validate_options ${1+"$@"} - func_propagate_result func_run_hooks func_validate_options + if func_run_hooks func_validate_options ${1+"$@"}; then + # save modified positional parameters for caller + func_validate_options_result=$func_run_hooks_result + _G_rc_validate_options=: + fi # Bail if the options were screwed! $exit_cmd $EXIT_FAILURE + + $_G_rc_validate_options } @@ -2067,8 +1916,8 @@ # func_split_equals STRING # ------------------------ -# Set func_split_equals_lhs and func_split_equals_rhs shell variables -# after splitting STRING at the '=' sign. +# Set func_split_equals_lhs and func_split_equals_rhs shell variables after +# splitting STRING at the '=' sign. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ @@ -2083,9 +1932,8 @@ func_split_equals_lhs=${1%%=*} func_split_equals_rhs=${1#*=} - if test "x$func_split_equals_lhs" = "x$1"; then - func_split_equals_rhs= - fi + test "x$func_split_equals_lhs" = "x$1" \ + && func_split_equals_rhs= }' else # ...otherwise fall back to using expr, which is often a shell builtin. @@ -2095,7 +1943,7 @@ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'` func_split_equals_rhs= - test "x$func_split_equals_lhs=" = "x$1" \ + test "x$func_split_equals_lhs" = "x$1" \ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'` } fi #func_split_equals @@ -2121,7 +1969,7 @@ { $debug_cmd - func_split_short_opt_name=`expr "x$1" : 'x\(-.\)'` + func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'` func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'` } fi #func_split_short_opt @@ -2163,44 +2011,31 @@ # func_version # ------------ # Echo version message to standard output and exit. -# The version message is extracted from the calling file's header -# comments, with leading '# ' stripped: -# 1. First display the progname and version -# 2. Followed by the header comment line matching /^# Written by / -# 3. Then a blank line followed by the first following line matching -# /^# Copyright / -# 4. Immediately followed by any lines between the previous matches, -# except lines preceding the intervening completely blank line. -# For example, see the header comments of this file. func_version () { $debug_cmd printf '%s\n' "$progname $scriptversion" $SED -n ' - /^# Written by /!b - s|^# ||; p; n - - :fwd2blnk - /./ { - n - b fwd2blnk + /(C)/!b go + :more + /\./!{ + N + s|\n# | | + b more } - p; n - - :holdwrnt - s|^# || - s|^# *$|| - /^Copyright /!{ - /./H - n - b holdwrnt + :go + /^# Written by /,/# warranty; / { + s|^# || + s|^# *$|| + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + p } - - s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| - G - s|\(\n\)\n*|\1|g - p; q' < "$progpath" + /^# Written by / { + s|^# || + p + } + /^warranty; /q' < "$progpath" exit $? } @@ -2210,35 +2045,12 @@ # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "30/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: # Set a version string. -scriptversion='(GNU libtool) 2.5.4' - -# func_version -# ------------ -# Echo version message to standard output and exit. -func_version () -{ - $debug_cmd - - year=`date +%Y` - - cat <<EOF -$progname $scriptversion -Copyright (C) $year Free Software Foundation, Inc. -License GPLv2+: GNU GPL version 2 or later <https://gnu.org/licenses/gpl.html> -This is free software: you are free to change and redistribute it. -There is NO WARRANTY, to the extent permitted by law. - -Originally written by Gordon Matzigkeit, 1996 -(See AUTHORS for complete contributor listing) -EOF - - exit $? -} +scriptversion='(GNU libtool) 2.4.6' # func_echo ARG... @@ -2261,6 +2073,18 @@ } +# func_warning ARG... +# ------------------- +# Libtool warnings are not categorized, so override funclib.sh +# func_warning with this simpler definition. +func_warning () +{ + $debug_cmd + + $warning_func ${1+"$@"} +} + + ## ---------------- ## ## Options parsing. ## ## ---------------- ## @@ -2272,23 +2096,19 @@ # Short help message in response to '-h'. usage_message="Options: - --config show all configuration variables - --debug enable verbose shell tracing - -n, --dry-run display commands without modifying any files - --features display basic configuration information - --finish use operation '--mode=finish' - --mode=MODE use operation mode MODE - --no-finish don't update shared library cache - --no-quiet, --no-silent print default informational messages - --no-warnings equivalent to '-Wnone' - --preserve-dup-deps don't remove duplicate dependency libraries - --quiet, --silent don't print informational messages - --reorder-cache=DIRS reorder shared library cache for preferred DIRS - --tag=TAG use configuration variables from tag TAG - -v, --verbose print more informational messages than default - --version print version information - -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] - -h, --help, --help-all print short, long, or detailed help message + --config show all configuration variables + --debug enable verbose shell tracing + -n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --mode=MODE use operation mode MODE + --no-warnings equivalent to '-Wnone' + --preserve-dup-deps don't remove duplicate dependency libraries + --quiet, --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + -v, --verbose print more informational messages than default + --version print version information + -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all] + -h, --help, --help-all print short, long, or detailed help message " # Additional text appended to 'usage_message' in response to '--help'. @@ -2321,13 +2141,13 @@ compiler: $LTCC compiler flags: $LTCFLAGS linker: $LD (gnu? $with_gnu_ld) - version: $progname $scriptversion + version: $progname $scriptversion Debian-2.4.6-15build2 automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` Report bugs to <bug-libtool@gnu.org>. -GNU libtool home page: <https://www.gnu.org/software/libtool/>. -General help using GNU software: <https://www.gnu.org/gethelp/>." +GNU libtool home page: <http://www.gnu.org/s/libtool/>. +General help using GNU software: <http://www.gnu.org/gethelp/>." exit 0 } @@ -2377,7 +2197,7 @@ # a configuration failure hint, and exit. func_fatal_configuration () { - func_fatal_error ${1+"$@"} \ + func__fatal_error ${1+"$@"} \ "See the $PACKAGE documentation for more information." \ "Fatal configuration error." } @@ -2517,11 +2337,8 @@ opt_dry_run=false opt_help=false opt_mode= - opt_reorder_cache=false opt_preserve_dup_deps=false opt_quiet=false - opt_finishing=true - opt_warning= nonopt= preserve_args= @@ -2558,9 +2375,11 @@ if $_G_rc_lt_options_prep; then # Pass back the list of options. - func_quote eval ${1+"$@"} - libtool_options_prep_result=$func_quote_result + func_quote_for_eval ${1+"$@"} + libtool_options_prep_result=$func_quote_for_eval_result fi + + $_G_rc_lt_options_prep } func_add_hook func_options_prep libtool_options_prep @@ -2611,18 +2430,14 @@ clean|compile|execute|finish|install|link|relink|uninstall) ;; # Catch anything else as an error - *) func_error "invalid argument '$1' for $_G_opt" + *) func_error "invalid argument for $_G_opt" exit_cmd=exit + break ;; esac shift ;; - --no-finish) - opt_finishing=false - func_append preserve_args " $_G_opt" - ;; - --no-silent|--no-quiet) opt_quiet=false func_append preserve_args " $_G_opt" @@ -2638,24 +2453,6 @@ func_append preserve_args " $_G_opt" ;; - --reorder-cache) - opt_reorder_cache=true - shared_lib_dirs=$1 - if test -n "$shared_lib_dirs"; then - case $1 in - # Must begin with /: - /*) ;; - - # Catch anything else as an error (relative paths) - *) func_error "invalid argument '$1' for $_G_opt" - func_error "absolute paths are required for $_G_opt" - exit_cmd=exit - ;; - esac - fi - shift - ;; - --silent|--quiet) opt_quiet=: opt_verbose=false @@ -2685,25 +2482,15 @@ if $_G_rc_lt_parse_options; then # save modified positional parameters for caller - func_quote eval ${1+"$@"} - libtool_parse_options_result=$func_quote_result + func_quote_for_eval ${1+"$@"} + libtool_parse_options_result=$func_quote_for_eval_result fi + + $_G_rc_lt_parse_options } func_add_hook func_parse_options libtool_parse_options -# func_warning ARG... -# ------------------- -# Libtool warnings are not categorized, so override funclib.sh -# func_warning with this simpler definition. -func_warning () -{ - if $opt_warning; then - $debug_cmd - $warning_func ${1+"$@"} - fi -} - # libtool_validate_options [ARG]... # --------------------------------- @@ -2720,10 +2507,10 @@ # preserve --debug test : = "$debug_cmd" || func_append preserve_args " --debug" - case $host_os in + case $host in # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452 # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788 - cygwin* | mingw* | windows* | pw32* | cegcc* | solaris2* | os2*) + *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*) # don't eliminate duplications in $postdeps and $predeps opt_duplicate_compiler_generated_deps=: ;; @@ -2756,8 +2543,8 @@ } # Pass back the unparsed argument list - func_quote eval ${1+"$@"} - libtool_validate_options_result=$func_quote_result + func_quote_for_eval ${1+"$@"} + libtool_validate_options_result=$func_quote_for_eval_result } func_add_hook func_validate_options libtool_validate_options @@ -3055,7 +2842,7 @@ # func_convert_core_file_wine_to_w32 ARG # Helper function used by file name conversion functions when $build is *nix, -# and $host is mingw, windows, cygwin, or some other w32 environment. Relies on a +# and $host is mingw, cygwin, or some other w32 environment. Relies on a # correctly configured wine environment available, with the winepath program # in $build's $PATH. # @@ -3087,10 +2874,9 @@ # func_convert_core_path_wine_to_w32 ARG # Helper function used by path conversion functions when $build is *nix, and -# $host is mingw, windows, cygwin, or some other w32 environment. Relies on a -# correctly configured wine environment available, with the winepath program -# in $build's $PATH. Assumes ARG has no leading or trailing path separator -# characters. +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. # # ARG is path to be converted from $build format to win32. # Result is available in $func_convert_core_path_wine_to_w32_result. @@ -3233,15 +3019,6 @@ # end func_convert_path_front_back_pathsep -# func_convert_delimited_path PATH ORIG_DELIMITER NEW_DELIMITER -# Replaces a delimiter for a given path. -func_convert_delimited_path () -{ - converted_path=`$ECHO "$1" | $SED "s#$2#$3#g"` -} -# end func_convert_delimited_path - - ################################################## # $build to $host FILE NAME CONVERSION FUNCTIONS # ################################################## @@ -3576,65 +3353,6 @@ } -# func_reorder_shared_lib_cache DIRS -# Reorder the shared library cache by unconfiguring previous shared library cache -# and configuring preferred search directories before previous search directories. -# Previous shared library cache: /usr/lib /usr/local/lib -# Preferred search directories: /tmp/testing -# Reordered shared library cache: /tmp/testing /usr/lib /usr/local/lib -func_reorder_shared_lib_cache () -{ - $debug_cmd - - case $host_os in - openbsd*) - get_search_directories=`PATH="$PATH:/sbin" ldconfig -r | $GREP "search directories" | $SED "s#.*search directories:\ ##g"` - func_convert_delimited_path "$get_search_directories" ':' '\ ' - save_search_directories=$converted_path - func_convert_delimited_path "$1" ':' '\ ' - - # Ensure directories exist - for dir in $converted_path; do - # Ensure each directory is an absolute path - case $dir in - /*) ;; - *) func_error "Directory '$dir' is not an absolute path" - exit $EXIT_FAILURE ;; - esac - # Ensure no trailing slashes - func_stripname '' '/' "$dir" - dir=$func_stripname_result - if test -d "$dir"; then - if test -n "$preferred_search_directories"; then - preferred_search_directories="$preferred_search_directories $dir" - else - preferred_search_directories=$dir - fi - else - func_error "Directory '$dir' does not exist" - exit $EXIT_FAILURE - fi - done - - PATH="$PATH:/sbin" ldconfig -U $save_search_directories - PATH="$PATH:/sbin" ldconfig -m $preferred_search_directories $save_search_directories - get_search_directories=`PATH="$PATH:/sbin" ldconfig -r | $GREP "search directories" | $SED "s#.*search directories:\ ##g"` - func_convert_delimited_path "$get_search_directories" ':' '\ ' - reordered_search_directories=$converted_path - - $ECHO "Original: $save_search_directories" - $ECHO "Reordered: $reordered_search_directories" - exit $EXIT_SUCCESS - ;; - *) - func_error "--reorder-cache is not supported for host_os=$host_os." - exit $EXIT_FAILURE - ;; - esac -} -# end func_reorder_shared_lib_cache - - # func_mode_compile arg... func_mode_compile () { @@ -3792,8 +3510,8 @@ esac done - func_quote_arg pretty "$libobj" - test "X$libobj" != "X$func_quote_arg_result" \ + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" @@ -3813,7 +3531,7 @@ # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in - cygwin* | mingw* | windows* | pw32* | os2* | cegcc*) + cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac @@ -3866,8 +3584,8 @@ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result - func_quote_arg pretty "$srcfile" - qsrcfile=$func_quote_arg_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test yes = "$build_libtool_libs"; then @@ -4022,8 +3740,7 @@ -prefer-non-pic try to build non-PIC objects only -shared do not build a '.o' file suitable for static linking -static only build a '.o' file suitable for static linking - -Wc,FLAG - -Xcompiler FLAG pass FLAG directly to the compiler + -Wc,FLAG pass FLAG directly to the compiler COMPILE-COMMAND is a command to be used in creating a 'standard' object file from the given SOURCEFILE. @@ -4129,8 +3846,6 @@ -weak LIBNAME declare that the target provides the LIBNAME interface -Wc,FLAG -Xcompiler FLAG pass linker-specific FLAG directly to the compiler - -Wa,FLAG - -Xassembler FLAG pass linker-specific FLAG directly to the assembler -Wl,FLAG -Xlinker FLAG pass linker-specific FLAG directly to the linker -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) @@ -4207,12 +3922,6 @@ fi -# If option '--reorder-cache', reorder the shared library cache and exit. -if $opt_reorder_cache; then - func_reorder_shared_lib_cache $shared_lib_dirs -fi - - # func_mode_execute arg... func_mode_execute () { @@ -4397,7 +4106,7 @@ fi fi - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs" && $opt_finishing; then + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. @@ -4422,12 +4131,6 @@ for libdir in $libdirs; do $ECHO " $libdir" done - if test "false" = "$opt_finishing"; then - echo - echo "NOTE: finish_cmds were not executed during testing, so you must" - echo "manually run ldconfig to add a given test directory, LIBDIR, to" - echo "the search path for generated executables." - fi echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" @@ -4485,8 +4188,8 @@ case $nonopt in *shtool*) :;; *) false;; esac then # Aesthetically quote it. - func_quote_arg pretty "$nonopt" - install_prog="$func_quote_arg_result " + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " arg=$1 shift else @@ -4496,8 +4199,8 @@ # The real first argument should be the name of the installation program. # Aesthetically quote it. - func_quote_arg pretty "$arg" - func_append install_prog "$func_quote_arg_result" + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; @@ -4554,12 +4257,12 @@ esac # Aesthetically quote the argument. - func_quote_arg pretty "$arg" - func_append install_prog " $func_quote_arg_result" + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" if test -n "$arg2"; then - func_quote_arg pretty "$arg2" + func_quote_for_eval "$arg2" fi - func_append install_shared_prog " $func_quote_arg_result" + func_append install_shared_prog " $func_quote_for_eval_result" done test -z "$install_prog" && \ @@ -4570,8 +4273,8 @@ if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else - func_quote_arg pretty "$install_override_mode" - func_append install_shared_prog " -m $func_quote_arg_result" + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" fi fi @@ -4664,15 +4367,8 @@ func_append dir "$objdir" if test -n "$relink_command"; then - # Strip any trailing slash from the destination. - func_stripname '' '/' "$libdir" - destlibdir=$func_stripname_result - - func_stripname '' '/' "$destdir" - s_destdir=$func_stripname_result - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"` + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` # Don't allow the user to place us outside of our expected # location b/c this prevents finding dependent libraries that @@ -4709,7 +4405,7 @@ 'exit $?' tstripme=$stripme case $host_os in - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) case $realname in *.dll.a) tstripme= @@ -4822,7 +4518,7 @@ # Do a test to see if this is really a libtool program. case $host in - *cygwin* | *mingw* | *windows*) + *cygwin* | *mingw*) if func_ltwrapper_executable_p "$file"; then func_ltwrapper_scriptname "$file" wrapper=$func_ltwrapper_scriptname_result @@ -4874,8 +4570,8 @@ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_quiet || { - func_quote_arg expand,pretty "$relink_command" - eval "func_echo $func_quote_arg_result" + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" } if eval "$relink_command"; then : else @@ -5050,7 +4746,7 @@ $RM $export_symbols eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' case $host in - *cygwin* | *mingw* | *windows* | *cegcc* ) + *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ;; @@ -5062,7 +4758,7 @@ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' eval '$MV "$nlist"T "$nlist"' case $host in - *cygwin* | *mingw* | *windows* | *cegcc* ) + *cygwin* | *mingw* | *cegcc* ) eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ;; @@ -5076,7 +4772,7 @@ func_basename "$dlprefile" name=$func_basename_result case $host in - *cygwin* | *mingw* | *windows* | *cegcc* ) + *cygwin* | *mingw* | *cegcc* ) # if an import library, we need to obtain dlname if func_win32_import_lib_p "$dlprefile"; then func_tr_sh "$dlprefile" @@ -5102,16 +4798,8 @@ eval '$ECHO ": $name " >> "$nlist"' fi func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 - case $host in - i[3456]86-*-mingw32*) - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" - ;; - *) - eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | - $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/__nm_//' >> '$nlist'" - ;; - esac + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" } else # not an import lib $opt_dry_run || { @@ -5259,7 +4947,7 @@ # Transform the symbol file into the correct name. symfileobj=$output_objdir/${my_outputname}S.$objext case $host in - *cygwin* | *mingw* | *windows* | *cegcc* ) + *cygwin* | *mingw* | *cegcc* ) if test -f "$output_objdir/$my_outputname.def"; then compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` @@ -5335,7 +5023,7 @@ *ar\ archive*) # could be an import, or static # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64|pe-aarch64)' >/dev/null; then + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then case $nm_interface in "MS dumpbin") if func_cygming_ms_implib_p "$1" || @@ -5602,7 +5290,7 @@ # # Emit a libtool wrapper script on stdout. # Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw/windows +# incorporate the script contents within a cygwin/mingw # wrapper executable. Must ONLY be called from within # func_mode_link because it depends on a number of variables # set therein. @@ -5610,7 +5298,7 @@ # ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR # variable will take. If 'yes', then the emitted script # will assume that the directory where it is stored is -# the $objdir directory. This is a cygwin/mingw/windows-specific +# the $objdir directory. This is a cygwin/mingw-specific # behavior. func_emit_wrapper () { @@ -5662,8 +5350,7 @@ if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" - func_quote_arg pretty "$ECHO" - qECHO=$func_quote_arg_result + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` $ECHO "\ # A function that is used when there is no print builtin or printf. @@ -5673,7 +5360,7 @@ \$1 _LTECHO_EOF' } - ECHO=$qECHO + ECHO=\"$qECHO\" fi # Very basic option parsing. These options are (a) specific to @@ -5735,7 +5422,7 @@ " case $host in # Backslashes separate directories on plain windows - *-*-mingw* | *-*-windows* | *-*-os2* | *-cegcc*) + *-*-mingw | *-*-os2* | *-cegcc*) $ECHO "\ if test -n \"\$lt_option_debug\"; then \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2 @@ -5803,7 +5490,7 @@ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` done - # Usually 'no', except on cygwin/mingw/windows when embedded into + # Usually 'no', except on cygwin/mingw when embedded into # the cwrapper. WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then @@ -5935,7 +5622,7 @@ #endif #include <stdio.h> #include <stdlib.h> -#if defined _WIN32 && !defined __GNUC__ +#ifdef _MSC_VER # include <direct.h> # include <process.h> # include <io.h> @@ -5960,7 +5647,7 @@ /* declarations of non-ANSI functions */ #if defined __MINGW32__ # ifdef __STRICT_ANSI__ -_CRTIMP int __cdecl _putenv (const char *); +int _putenv (const char *); # endif #elif defined __CYGWIN__ # ifdef __STRICT_ANSI__ @@ -6158,7 +5845,7 @@ { EOF case $host in - *mingw* | *windows* | *cygwin* ) + *mingw* | *cygwin* ) # make stdout use "unix" line endings echo " setmode(1,_O_BINARY);" ;; @@ -6177,7 +5864,7 @@ { /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX namespace, but it is not one of the ones we know about and - have already dealt with, above (including dump-script), then + have already dealt with, above (inluding dump-script), then report an error. Otherwise, targets might begin to believe they are allowed to use options in the LTWRAPPER_OPTION_PREFIX namespace. The first time any user complains about this, we'll @@ -6261,7 +5948,7 @@ EOF case $host_os in - mingw* | windows*) + mingw*) cat <<"EOF" { char* p; @@ -6303,7 +5990,7 @@ EOF case $host_os in - mingw* | windows*) + mingw*) cat <<"EOF" /* execv doesn't actually work on mingw as expected on unix */ newargz = prepare_spawn (newargz); @@ -6722,7 +6409,7 @@ EOF case $host_os in - mingw* | windows*) + mingw*) cat <<"EOF" /* Prepares an argument vector before calling spawn(). @@ -6897,7 +6584,7 @@ $debug_cmd case $host in - *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # what system we are compiling for in order to pass an extra @@ -6921,7 +6608,6 @@ finalize_command=$nonopt compile_rpath= - compile_rpath_tail= finalize_rpath= compile_shlibpath= finalize_shlibpath= @@ -6962,12 +6648,10 @@ xrpath= perm_rpath= temp_rpath= - temp_rpath_tail= thread_safe=no vinfo= vinfo_number=no weak_libs= - rpath_arg= single_module=$wl-single_module func_infer_tag $base_compile @@ -7019,9 +6703,9 @@ while test "$#" -gt 0; do arg=$1 shift - func_quote_arg pretty,unquoted "$arg" - qarg=$func_quote_arg_unquoted_result - func_append libtool_args " $func_quote_arg_result" + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then @@ -7230,7 +6914,7 @@ case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - func_fatal_error "argument to -rpath is not absolute: $arg" + func_fatal_error "only absolute run-paths are allowed" ;; esac if test rpath = "$prev"; then @@ -7257,13 +6941,6 @@ prev= continue ;; - xassembler) - func_append compiler_flags " -Xassembler $qarg" - prev= - func_append compile_command " -Xassembler $qarg" - func_append finalize_command " -Xassembler $qarg" - continue - ;; xcclinker) func_append linker_flags " $qarg" func_append compiler_flags " $qarg" @@ -7406,7 +7083,7 @@ ;; esac case $host in - *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; @@ -7426,7 +7103,7 @@ -l*) if test X-lc = "X$arg" || test X-lm = "X$arg"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; @@ -7434,7 +7111,7 @@ # These systems don't actually have a C library (as such) test X-lc = "X$arg" && continue ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc due to us having libc/libc_r. test X-lc = "X$arg" && continue ;; @@ -7454,7 +7131,7 @@ esac elif test X-lc_r = "X$arg"; then case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*) # Do not include libc_r directly, use -pthread flag. continue ;; @@ -7477,29 +7154,16 @@ # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. # Darwin uses the -arch flag to determine output architecture. - # -q <option> for IBM XL C/C++ compiler. - -model|-arch|-isysroot|--sysroot|-q) + -model|-arch|-isysroot|--sysroot) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" prev=xcompiler continue ;; - # Solaris ld rejects as of 11.4. Refer to Oracle bug 22985199. - -pthread) - case $host in - *solaris2*) ;; - *) - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) func_append new_inherited_linker_flags " $arg" ;; - esac - ;; - esac - continue - ;; - -mt|-mthreads|-kthread|-Kthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-fopenmp=*|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" @@ -7522,7 +7186,7 @@ -no-install) case $host in - *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. func_warning "'-no-install' is ignored for $host" @@ -7582,7 +7246,7 @@ dir=$lt_sysroot$func_stripname_result ;; *) - func_fatal_error "argument ($arg) to '-R' is not an absolute path: $dir" + func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in @@ -7639,9 +7303,9 @@ save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs - func_quote_arg pretty "$flag" - func_append arg " $func_quote_arg_result" - func_append compiler_flags " $func_quote_arg_result" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" @@ -7655,21 +7319,16 @@ save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs - func_quote_arg pretty "$flag" - func_append arg " $wl$func_quote_arg_result" - func_append compiler_flags " $wl$func_quote_arg_result" - func_append linker_flags " $func_quote_arg_result" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" arg=$func_stripname_result ;; - -Xassembler) - prev=xassembler - continue - ;; - -Xcompiler) prev=xcompiler continue @@ -7687,8 +7346,8 @@ # -msg_* for osf cc -msg_*) - func_quote_arg pretty "$arg" - arg=$func_quote_arg_result + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result ;; # Flags to be passed through unchanged, with rationale: @@ -7707,31 +7366,16 @@ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization # -specs=* GCC specs files # -stdlib=* select c++ std lib with clang - # -fdiagnostics-color* simply affects output - # -frecord-gcc-switches used to verify flags were respected # -fsanitize=* Clang/GCC memory and address sanitizer - # -fno-sanitize* Clang/GCC memory and address sanitizer - # -shared-libsan Link with shared sanitizer runtimes (Clang) - # -static-libsan Link with static sanitizer runtimes (Clang) - # -no-canonical-prefixes Do not expand any symbolic links # -fuse-ld=* Linker select flags for GCC # -static-* direct GCC to link specific libraries statically # -fcilkplus Cilk Plus language extension features for C/C++ - # -rtlib=* select c runtime lib with clang - # --unwindlib=* select unwinder library with clang - # -f{file|debug|macro|profile}-prefix-map=* needed for lto linking - # -Wa,* Pass flags directly to the assembler - # -Werror, -Werror=* Report (specified) warnings as errors -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-no-canonical-prefixes| \ - -stdlib=*|-rtlib=*|--unwindlib=*| \ - -specs=*|-fsanitize=*|-fno-sanitize*|-shared-libsan|-static-libsan| \ - -ffile-prefix-map=*|-fdebug-prefix-map=*|-fmacro-prefix-map=*|-fprofile-prefix-map=*| \ - -fdiagnostics-color*|-frecord-gcc-switches| \ - -fuse-ld=*|-static-*|-fcilkplus|-Wa,*|-Werror|-Werror=*) - func_quote_arg pretty "$arg" - arg=$func_quote_arg_result + -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \ + -specs=*|-fsanitize=*|-fuse-ld=*|-static-*|-fcilkplus) + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" @@ -7752,15 +7396,15 @@ continue else # Otherwise treat like 'Some other compiler flag' below - func_quote_arg pretty "$arg" - arg=$func_quote_arg_result + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result fi ;; # Some other compiler flag. -* | +*) - func_quote_arg pretty "$arg" - arg=$func_quote_arg_result + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result ;; *.$objext) @@ -7880,27 +7524,15 @@ *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. - func_quote_arg pretty "$arg" - arg=$func_quote_arg_result + func_quote_for_eval "$arg" + arg=$func_quote_for_eval_result ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then - if test -n "$rpath_arg"; then - func_append finalize_rpath " ${arg##*,}" - unset rpath_arg - else - case $arg in - -Wl,-rpath,*) - func_append finalize_rpath " ${arg##*,}";; - -Wl,-rpath) - rpath_arg=1;; - *) - func_append compile_command " $arg" - func_append finalize_command " $arg" - esac - fi + func_append compile_command " $arg" + func_append finalize_command " $arg" fi done # argument parsing loop @@ -8034,7 +7666,10 @@ case $pass in dlopen) libs=$dlfiles ;; dlpreopen) libs=$dlprefiles ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + link) + libs="$deplibs %DEPLIBS%" + test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" + ;; esac fi if test lib,dlpreopen = "$linkmode,$pass"; then @@ -8071,7 +7706,7 @@ found=false case $deplib in -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ - |-threads|-fopenmp|-fopenmp=*|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test prog,link = "$linkmode,$pass"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" @@ -8248,15 +7883,18 @@ ;; esac if $valid_a_lib; then - func_warning "Linking the shared library $output against the static library $deplib is not portable!" + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" else - func_warning "Trying to link with static lib archive $deplib." - func_warning "I have the capability to make that library automatically link in when" - func_warning "you link to this library. But I can only do this if you have a" - func_warning "shared version of the library, which you do not appear to have" - func_warning "because the file extensions .$libext of this argument makes me believe" - func_warning "that it is just a static archive that I should not use here." + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." fi ;; esac @@ -8350,19 +7988,19 @@ # It is a libtool convenience library, so add in its objects. func_append convenience " $ladir/$objdir/$old_library" func_append old_convenience " $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done elif test prog != "$linkmode" && test lib != "$linkmode"; then func_fatal_error "'$lib' is not a convenience library" fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_preserve_dup_deps; then - case "$tmp_libs " in - *" $deplib "*) func_append specialdeplibs " $deplib" ;; - esac - fi - func_append tmp_libs " $deplib" - done continue fi # $pass = conv @@ -8451,7 +8089,7 @@ fi case $host in # special handling for platforms with PE-DLLs. - *cygwin* | *mingw* | *windows* | *cegcc* ) + *cygwin* | *mingw* | *cegcc* ) # Linker will automatically link against shared library if both # static and shared are present. Therefore, ensure we extract # symbols from the import library if a shared library is present @@ -8551,10 +8189,7 @@ # Make sure the rpath contains only unique directories. case $temp_rpath: in *"$absdir:"*) ;; - *) case $absdir in - "$progdir/"*) func_append temp_rpath "$absdir:" ;; - *) func_append temp_rpath_tail "$absdir:" ;; - esac + *) func_append temp_rpath "$absdir:" ;; esac fi @@ -8564,12 +8199,9 @@ case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) - case "$compile_rpath$compile_rpath_tail " in + case "$compile_rpath " in *" $absdir "*) ;; - *) case $absdir in - "$progdir/"*) func_append compile_rpath " $absdir" ;; - *) func_append compile_rpath_tail " $absdir" ;; - esac + *) func_append compile_rpath " $absdir" ;; esac ;; esac @@ -8600,8 +8232,8 @@ fi if test -n "$library_names" && { test no = "$use_static_libs" || test -z "$old_library"; }; then - case $host_os in - cygwin* | mingw* | windows* | cegcc* | os2*) + case $host in + *cygwin* | *mingw* | *cegcc* | *os2*) # No point in relinking DLLs because paths are not encoded func_append notinst_deplibs " $lib" need_relink=no @@ -8627,11 +8259,11 @@ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then echo if test prog = "$linkmode"; then - func_warning "Linking the executable $output against the loadable module" + $ECHO "*** Warning: Linking the executable $output against the loadable module" else - func_warning "Linking the shared library $output against the loadable module" + $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi - func_warning "$linklib is not portable!" + $ECHO "*** $linklib is not portable!" fi if test lib = "$linkmode" && test yes = "$hardcode_into_libs"; then @@ -8641,12 +8273,9 @@ case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) - case "$compile_rpath$compile_rpath_tail " in + case "$compile_rpath " in *" $absdir "*) ;; - *) case $absdir in - "$progdir/"*) func_append compile_rpath " $absdir" ;; - *) func_append compile_rpath_tail " $absdir" ;; - esac + *) func_append compile_rpath " $absdir" ;; esac ;; esac @@ -8673,8 +8302,8 @@ soname=$dlname elif test -n "$soname_spec"; then # bleh windows - case $host_os in - cygwin* | mingw* | windows* | cegcc* | os2*) + case $host in + *cygwin* | mingw* | *cegcc* | *os2*) func_arith $current - $age major=$func_arith_result versuffix=-$major @@ -8721,7 +8350,6 @@ case $host in *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;; *-*-sysv4*uw2*) add_dir=-L$dir ;; - *-*-emscripten*) add_dir=-L$dir ;; *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir=-L$dir ;; *-*-darwin* ) @@ -8730,10 +8358,11 @@ if /usr/bin/file -L $add 2> /dev/null | $GREP ": [^:]* bundle" >/dev/null; then if test "X$dlopenmodule" != "X$lib"; then - func_warning "lib $linklib is a module, not a shared library" + $ECHO "*** Warning: lib $linklib is a module, not a shared library" if test -z "$old_library"; then - func_warning "And there doesn't seem to be a static archive available" - func_warning "The link will probably fail, sorry" + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" else add=$dir/$old_library fi @@ -8816,7 +8445,7 @@ test no = "$hardcode_direct_absolute"; then add=$libdir/$linklib elif test yes = "$hardcode_minus_L"; then - add_dir=-L$lt_sysroot$libdir + add_dir=-L$libdir add=-l$name elif test yes = "$hardcode_shlibpath_var"; then case :$finalize_shlibpath: in @@ -8833,7 +8462,7 @@ fi else # We cannot seem to hardcode it, guess we'll fake it. - add_dir=-L$lt_sysroot$libdir + add_dir=-L$libdir # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -8873,19 +8502,21 @@ # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - func_warning "This system cannot link to static lib archive $lib." - func_warning "I have the capability to make that library automatically link in when" - func_warning "you link to this library. But I can only do this if you have a" - func_warning "shared version of the library, which you do not appear to have." + echo + $ECHO "*** Warning: This system cannot link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." if test yes = "$module"; then - func_warning "But as you try to build a module library, libtool will still create " - func_warning "a static module, that should work as long as the dlopening application" - func_warning "is linked with the -dlopen flag to resolve symbols at runtime." + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - func_warning "However, this would only work if libtool was able to extract symbol" - func_warning "lists from a program, using 'nm' or equivalent, but libtool could" - func_warning "not find such a program. So, this module is probably useless." - func_warning "'nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi if test no = "$build_old_libs"; then build_libtool_libs=module @@ -9008,10 +8639,6 @@ fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - - func_append temp_rpath "$temp_rpath_tail" - func_append compile_rpath "$compile_rpath_tail" - if test link = "$pass"; then if test prog = "$linkmode"; then compile_deplibs="$new_inherited_linker_flags $compile_deplibs" @@ -9049,46 +8676,42 @@ # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: new_libs="$deplib $new_libs" for deplib in $tmp_libs; do - if $opt_preserve_dup_deps; then - new_libs="$deplib $new_libs" - else - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. And if not possible for portability - # reasons, then --preserve-dup-deps should be used. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; esac - fi + ;; + esac done tmp_libs= for deplib in $new_libs; do @@ -9110,7 +8733,7 @@ test CXX = "$tagname" && { case $host_os in linux*) - case `$CC -V 2>&1 | $SED 5q` in + case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 func_suncc_cstd_abi @@ -9220,7 +8843,9 @@ if test pass_all != "$deplibs_check_method"; then func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs" else - func_warning "Linking the shared library $output against the non-libtool objects $objs is not portable!" + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" func_append libobjs " $objs" fi fi @@ -9281,13 +8906,13 @@ # case $version_type in # correct linux to gnu/linux during the next big refactor - darwin|freebsd-elf|linux|midnightbsd-elf|osf|qnx|windows|none) + darwin|freebsd-elf|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result age=$number_minor revision=$number_revision ;; - freebsd-aout|sco|sunos) + freebsd-aout|qnx|sunos) current=$number_major revision=$number_minor age=0 @@ -9375,7 +9000,7 @@ versuffix=.$current.$revision ;; - freebsd-elf | midnightbsd-elf) + freebsd-elf) func_arith $current - $age major=.$func_arith_result versuffix=$major.$age.$revision @@ -9437,9 +9062,8 @@ ;; qnx) - func_arith $current - $age - major=.$func_arith_result - versuffix=$major.$age.$revision + major=.$current + versuffix=.$current ;; sco) @@ -9592,7 +9216,7 @@ if test yes = "$build_libtool_libs"; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) @@ -9602,7 +9226,7 @@ *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-midnightbsd*) + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) # Do not include libc due to us having libc/libc_r. ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -9643,6 +9267,108 @@ # implementing what was already the behavior. newdeplibs=$deplibs ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $opt_dry_run || $RM conftest.c + cat > conftest.c <<EOF + int main() { return 0; } +EOF + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then + ldd_output=`ldd conftest` + for i in $deplibs; do + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + case " $predeps $postdeps " in + *" $i "*) + func_append newdeplibs " $i" + i= + ;; + esac + fi + if test -n "$i"; then + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then + func_append newdeplibs " $i" + else + droppeddeps=yes + echo + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which I believe you do not have" + echo "*** because a test_compile did reveal that the linker did not use it for" + echo "*** its dynamic dependency list that programs get resolved with at runtime." + fi + fi + ;; + *) + func_append newdeplibs " $i" + ;; + esac + done + else + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result + $opt_dry_run || $RM conftest + if $LTCC $LTCFLAGS -o conftest conftest.c $i; then + ldd_output=`ldd conftest` + if test yes = "$allow_libtool_libs_with_static_runtimes"; then + case " $predeps $postdeps " in + *" $i "*) + func_append newdeplibs " $i" + i= + ;; + esac + fi + if test -n "$i"; then + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then + func_append newdeplibs " $i" + else + droppeddeps=yes + echo + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because a test_compile did reveal that the linker did not use this one" + echo "*** as a dynamic dependency that programs can get resolved with at runtime." + fi + fi + else + droppeddeps=yes + echo + $ECHO "*** Warning! Library $i is needed by this library but I was not able to" + echo "*** make it link in! You will probably need to install it or some" + echo "*** library that it depends on before this library will be fully" + echo "*** functional. Installing it before continuing would be even better." + fi + ;; + *) + func_append newdeplibs " $i" + ;; + esac + done + fi + ;; file_magic*) set dummy $deplibs_check_method; shift file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` @@ -9706,16 +9432,17 @@ fi if test -n "$a_deplib"; then droppeddeps=yes - func_warning "Linker path does not have real file for library $a_deplib." - func_warning "I have the capability to make that library automatically link in when" - func_warning "you link to this library. But I can only do this if you have a" - func_warning "shared version of the library, which you do not appear to have" - func_warning "because I did check the linker path looking for a file starting" + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib"; then - func_warning "with $libname but no candidates were found. (...for file magic test)" + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else - func_warning "with $libname and none of the candidates passed a file format test" - func_warning "using a file magic. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" fi fi ;; @@ -9759,16 +9486,17 @@ fi if test -n "$a_deplib"; then droppeddeps=yes - func_warning "Linker path does not have real file for library $a_deplib." - func_warning "I have the capability to make that library automatically link in when" - func_warning "you link to this library. But I can only do this if you have a" - func_warning "shared version of the library, which you do not appear to have" - func_warning "because I did check the linker path looking for a file starting" + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib"; then - func_warning "with $libname but no candidates were found. (...for regex pattern test)" + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else - func_warning "with $libname and none of the candidates passed a file format test" - func_warning "using a regex pattern. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi ;; @@ -9792,11 +9520,11 @@ *[!\ \ ]*) echo if test none = "$deplibs_check_method"; then - func_warning "Inter-library dependencies are not supported in this platform." + echo "*** Warning: inter-library dependencies are not supported in this platform." else - func_warning "Inter-library dependencies are not known to be supported." + echo "*** Warning: inter-library dependencies are not known to be supported." fi - func_warning "All declared inter-library dependencies are being dropped." + echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes ;; esac @@ -9817,15 +9545,17 @@ if test yes = "$droppeddeps"; then if test yes = "$module"; then - func_warning "libtool could not satisfy all declared inter-library" - func_warning "dependencies of module $libname. Therefore, libtool will create" - func_warning "a static module, that should work as long as the dlopening" - func_warning "application is linked with the -dlopen flag." + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - func_warning "However, this would only work if libtool was able to extract symbol" - func_warning "lists from a program, using 'nm' or equivalent, but libtool could" - func_warning "not find such a program. So, this module is probably useless." - func_warning "'nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using 'nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** 'nm' from GNU binutils and a full rebuild may help." fi if test no = "$build_old_libs"; then oldlibs=$output_objdir/$libname.$libext @@ -10000,7 +9730,7 @@ orig_export_symbols= case $host_os in - cygwin* | mingw* | windows* | cegcc*) + cygwin* | mingw* | cegcc*) if test -n "$export_symbols" && test -z "$export_symbols_regex"; then # exporting using user supplied symfile func_dll_def_p "$export_symbols" || { @@ -10198,7 +9928,20 @@ last_robj= k=1 - if test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then + if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then + output=$output_objdir/$output_la.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then output=$output_objdir/$output_la.lnk func_verbose "creating linker input file list: $output" : > $output @@ -10217,19 +9960,6 @@ func_append delfiles " $output" func_to_tool_file "$output" output=$firstobj\"$file_list_spec$func_to_tool_file_result\" - elif test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then - output=$output_objdir/$output_la.lnkscript - func_verbose "creating GNU ld script: $output" - echo 'INPUT (' > $output - for obj in $save_libobjs - do - func_to_tool_file "$obj" - $ECHO "$func_to_tool_file_result" >> $output - done - echo ')' >> $output - func_append delfiles " $output" - func_to_tool_file "$output" - output=$func_to_tool_file_result else if test -n "$save_libobjs"; then func_verbose "creating reloadable object files..." @@ -10307,8 +10037,8 @@ for cmd in $concat_cmds; do IFS=$save_ifs $opt_quiet || { - func_quote_arg expand,pretty "$cmd" - eval "func_echo $func_quote_arg_result" + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? @@ -10401,8 +10131,8 @@ eval cmd=\"$cmd\" IFS=$save_ifs $opt_quiet || { - func_quote_arg expand,pretty "$cmd" - eval "func_echo $func_quote_arg_result" + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? @@ -10670,7 +10400,7 @@ esac fi case $host in - *-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-os2* | *-cegcc*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; @@ -10748,7 +10478,7 @@ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. wrappers_required=false ;; - *cygwin* | *mingw* | *windows* ) + *cygwin* | *mingw* ) test yes = "$build_libtool_libs" || wrappers_required=false ;; *) @@ -10876,13 +10606,12 @@ elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - func_quote_arg pretty "$var_value" - relink_command="$var=$func_quote_arg_result; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done - func_quote eval cd "`pwd`" - func_quote_arg pretty,unquoted "($func_quote_result; $relink_command)" - relink_command=$func_quote_arg_unquoted_result + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi # Only actually do things if not in dry run mode. @@ -10902,7 +10631,7 @@ *) exeext= ;; esac case $host in - *cygwin* | *mingw* | windows* ) + *cygwin* | *mingw* ) func_dirname_and_basename "$output" "" "." output_name=$func_basename_result output_path=$func_dirname_result @@ -11122,15 +10851,13 @@ elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - func_quote_arg pretty,unquoted "$var_value" - relink_command="$var=$func_quote_arg_unquoted_result; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. - func_quote eval cd "`pwd`" - relink_command="($func_quote_result; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - func_quote_arg pretty,unquoted "$relink_command" - relink_command=$func_quote_arg_unquoted_result + relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test yes = "$hardcode_automatic"; then relink_command= fi @@ -11236,7 +10963,7 @@ # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *windows*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) # If a -bindir argument was supplied, place the dll there. if test -n "$bindir"; then func_relative_path "$install_libdir" "$bindir"
diff --git a/config/missing b/config/missing index 7e7d78e..1fe1611 100755 --- a/config/missing +++ b/config/missing
@@ -1,11 +1,9 @@ #! /bin/sh -# Common wrapper for a few potentially missing GNU and other programs. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2024-06-07.14; # UTC +scriptversion=2018-03-07.03; # UTC -# shellcheck disable=SC2006,SC2268 # we must support pre-POSIX shells - -# Copyright (C) 1996-2024 Free Software Foundation, Inc. +# Copyright (C) 1996-2021 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -56,20 +54,18 @@ -v, --version output version information and exit Supported PROGRAM values: -aclocal autoconf autogen autoheader autom4te automake autoreconf -bison flex help2man lex makeinfo perl yacc + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. -Report bugs to <bug-automake@gnu.org>. -GNU Automake home page: <https://www.gnu.org/software/automake/>. -General help using GNU software: <https://www.gnu.org/gethelp/>." +Send bug reports to <bug-automake@gnu.org>." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing (GNU Automake) $scriptversion" + echo "missing $scriptversion (GNU Automake)" exit $? ;; @@ -112,7 +108,7 @@ program_details () { case $1 in - aclocal|automake|autoreconf) + aclocal|automake) echo "The '$1' program is part of the GNU Automake package:" echo "<$gnu_software_URL/automake>" echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" @@ -127,9 +123,6 @@ echo "<$gnu_software_URL/m4/>" echo "<$perl_URL>" ;; - *) - : - ;; esac } @@ -144,55 +137,48 @@ printf '%s\n' "'$1' is $msg." configure_deps="'configure.ac' or m4 files included by 'configure.ac'" - autoheader_deps="'acconfig.h'" - automake_deps="'Makefile.am'" - aclocal_deps="'acinclude.m4'" case $normalized_program in - aclocal*) - echo "You should only need it if you modified $aclocal_deps or" - echo "$configure_deps." - ;; autoconf*) - echo "You should only need it if you modified $configure_deps." - ;; - autogen*) - echo "You should only need it if you modified a '.def' or '.tpl' file." - echo "You may want to install the GNU AutoGen package:" - echo "<$gnu_software_URL/autogen/>" + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' ;; autoheader*) - echo "You should only need it if you modified $autoheader_deps or" + echo "You should only need it if you modified 'acconfig.h' or" echo "$configure_deps." + program_details 'autoheader' ;; automake*) - echo "You should only need it if you modified $automake_deps or" + echo "You should only need it if you modified 'Makefile.am' or" echo "$configure_deps." + program_details 'automake' ;; - autom4te*) + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) echo "You might have modified some maintainer files that require" echo "the 'autom4te' program to be rebuilt." - ;; - autoreconf*) - echo "You should only need it if you modified $aclocal_deps or" - echo "$automake_deps or $autoheader_deps or $automake_deps or" - echo "$configure_deps." + program_details 'autom4te' ;; bison*|yacc*) echo "You should only need it if you modified a '.y' file." echo "You may want to install the GNU Bison package:" echo "<$gnu_software_URL/bison/>" ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; help2man*) echo "You should only need it if you modified a dependency" \ "of a man page." echo "You may want to install the GNU Help2man package:" echo "<$gnu_software_URL/help2man/>" ;; - lex*|flex*) - echo "You should only need it if you modified a '.l' file." - echo "You may want to install the Fast Lexical Analyzer package:" - echo "<$flex_URL>" - ;; makeinfo*) echo "You should only need it if you modified a '.texi' file, or" echo "any other file indirectly affecting the aspect of the manual." @@ -203,12 +189,6 @@ echo "want to install GNU make:" echo "<$gnu_software_URL/make/>" ;; - perl*) - echo "You should only need it to run GNU Autoconf, GNU Automake, " - echo " assorted other tools, or if you modified a Perl source file." - echo "You may want to install the Perl 5 language interpreter:" - echo "<$perl_URL>" - ;; *) echo "You might have modified some files without having the proper" echo "tools for further handling them. Check the 'README' file, it" @@ -217,7 +197,6 @@ echo "case some other package contains this missing '$1' program." ;; esac - program_details "$normalized_program" } give_advice "$1" | sed -e '1s/^/WARNING: /' \
diff --git a/config/mkinstalldirs b/config/mkinstalldirs index e536369..c364f3d 100755 --- a/config/mkinstalldirs +++ b/config/mkinstalldirs
@@ -1,7 +1,7 @@ #! /bin/sh # mkinstalldirs --- make directory hierarchy -scriptversion=2024-06-19.01; # UTC +scriptversion=2020-07-26.22; # UTC # Original author: Noah Friedman <friedman@prep.ai.mit.edu> # Created: 1993-05-16 @@ -23,9 +23,7 @@ Create each directory DIR (with mode MODE, if specified), including all leading file name components. -Report bugs to <bug-automake@gnu.org>. -GNU Automake home page: <https://www.gnu.org/software/automake/>. -General help using GNU software: <https://www.gnu.org/gethelp/>." +Report bugs to <bug-automake@gnu.org>." # process command line arguments while test $# -gt 0 ; do @@ -41,7 +39,7 @@ shift ;; --version) - echo "$0 (GNU Automake) $scriptversion" + echo "$0 $scriptversion" exit $? ;; --) # stop option processing
diff --git a/config/test-driver b/config/test-driver index dc38f62..be73b80 100755 --- a/config/test-driver +++ b/config/test-driver
@@ -1,9 +1,9 @@ #! /bin/sh # test-driver - basic testsuite driver script. -scriptversion=2024-06-19.01; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 2011-2024 Free Software Foundation, Inc. +# Copyright (C) 2011-2021 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -44,16 +44,11 @@ Usage: test-driver --test-name NAME --log-file PATH --trs-file PATH [--expect-failure {yes|no}] [--color-tests {yes|no}] - [--collect-skipped-logs {yes|no}] [--enable-hard-errors {yes|no}] [--] TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS] The '--test-name', '--log-file' and '--trs-file' options are mandatory. See the GNU Automake documentation for information. - -Report bugs to <bug-automake@gnu.org>. -GNU Automake home page: <https://www.gnu.org/software/automake/>. -General help using GNU software: <https://www.gnu.org/gethelp/>. END } @@ -62,17 +57,15 @@ trs_file= # Where to save the metadata of the test run. expect_failure=no color_tests=no -collect_skipped_logs=yes enable_hard_errors=yes while test $# -gt 0; do case $1 in --help) print_usage; exit $?;; - --version) echo "test-driver (GNU Automake) $scriptversion"; exit $?;; + --version) echo "test-driver $scriptversion"; exit $?;; --test-name) test_name=$2; shift;; --log-file) log_file=$2; shift;; --trs-file) trs_file=$2; shift;; --color-tests) color_tests=$2; shift;; - --collect-skipped-logs) collect_skipped_logs=$2; shift;; --expect-failure) expect_failure=$2; shift;; --enable-hard-errors) enable_hard_errors=$2; shift;; --) shift; break;; @@ -128,7 +121,7 @@ case $tweaked_estatus:$expect_failure in 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;; 0:*) col=$grn res=PASS recheck=no gcopy=no;; - 77:*) col=$blu res=SKIP recheck=no gcopy=$collect_skipped_logs;; + 77:*) col=$blu res=SKIP recheck=no gcopy=yes;; 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;; *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;; *:*) col=$red res=FAIL recheck=yes gcopy=yes;;
diff --git a/configure b/configure index 034bf50..2a0f9d4 100755 --- a/configure +++ b/configure
@@ -1,11 +1,11 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.72 for iperf 3.18+. +# Generated by GNU Autoconf 2.71 for iperf 3.18+. # # Report bugs to <https://github.com/esnet/iperf>. # # -# Copyright (C) 1992-1996, 1998-2017, 2020-2023 Free Software Foundation, +# Copyright (C) 1992-1996, 1998-2017, 2020-2021 Free Software Foundation, # Inc. # # @@ -17,6 +17,7 @@ # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh +as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh @@ -25,13 +26,12 @@ # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST -else case e in #( - e) case `(set -o) 2>/dev/null` in #( +else $as_nop + case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; -esac ;; esac fi @@ -103,7 +103,7 @@ ;; esac -# We did not find ourselves, most probably we were run as 'sh COMMAND' +# We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 @@ -133,14 +133,15 @@ esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed 'exec'. +# out after a failed `exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 + as_bourne_compatible="as_nop=: +if test \${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh NULLCMD=: @@ -148,13 +149,12 @@ # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST -else case e in #( - e) case \`(set -o) 2>/dev/null\` in #( +else \$as_nop + case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; -esac ;; esac fi " @@ -172,9 +172,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ) then : -else case e in #( - e) exitcode=1; echo positional parameters were not saved. ;; -esac +else \$as_nop + exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 blah=\$(echo \$(echo blah)) @@ -196,15 +195,14 @@ if (eval "$as_required") 2>/dev/null then : as_have_required=yes -else case e in #( - e) as_have_required=no ;; -esac +else $as_nop + as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null then : -else case e in #( - e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +else $as_nop + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do @@ -237,13 +235,12 @@ if $as_found then : -else case e in #( - e) if { test -f "$SHELL" || test -f "$SHELL.exe"; } && +else $as_nop + if { test -f "$SHELL" || test -f "$SHELL.exe"; } && as_run=a "$SHELL" -c "$as_bourne_compatible""$as_required" 2>/dev/null then : CONFIG_SHELL=$SHELL as_have_required=yes -fi ;; -esac +fi fi @@ -265,7 +262,7 @@ esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed 'exec'. +# out after a failed `exec'. printf "%s\n" "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi @@ -285,8 +282,7 @@ $0: the script under such a shell if you do have one." fi exit 1 -fi ;; -esac +fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} @@ -325,6 +321,14 @@ as_fn_set_status $1 exit $1 } # as_fn_exit +# as_fn_nop +# --------- +# Do nothing but, unlike ":", preserve the value of $?. +as_fn_nop () +{ + return $? +} +as_nop=as_fn_nop # as_fn_mkdir_p # ------------- @@ -393,12 +397,11 @@ { eval $1+=\$2 }' -else case e in #( - e) as_fn_append () +else $as_nop + as_fn_append () { eval $1=\$$1\$2 - } ;; -esac + } fi # as_fn_append # as_fn_arith ARG... @@ -412,14 +415,21 @@ { as_val=$(( $* )) }' -else case e in #( - e) as_fn_arith () +else $as_nop + as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` - } ;; -esac + } fi # as_fn_arith +# as_fn_nop +# --------- +# Do nothing but, unlike ":", preserve the value of $?. +as_fn_nop () +{ + return $? +} +as_nop=as_fn_nop # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- @@ -493,8 +503,6 @@ /[$]LINENO/= ' <$as_myself | sed ' - t clear - :clear s/[$]LINENO.*/&-/ t lineno b @@ -543,6 +551,7 @@ as_echo='printf %s\n' as_echo_n='printf %s' + rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file @@ -554,9 +563,9 @@ if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: - # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. - # In both cases, we have to default to 'cp -pR'. + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then @@ -581,12 +590,10 @@ as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. -as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" -as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. -as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" -as_tr_sh="eval sed '$as_sed_sh'" # deprecated +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" SHELL=${CONFIG_SHELL-/bin/sh} @@ -682,7 +689,6 @@ AR DLLTOOL OBJDUMP -FILECMD LN_S NM ac_ct_DUMPBIN @@ -717,8 +723,6 @@ build_cpu build LIBTOOL -am__xargs_n -am__rm_f_notfound AM_BACKSLASH AM_DEFAULT_VERBOSITY AM_DEFAULT_V @@ -798,10 +802,8 @@ enable_silent_rules enable_shared enable_static -enable_pic with_pic enable_fast_install -enable_aix_soname with_aix_soname enable_dependency_tracking with_gnu_ld @@ -930,7 +932,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: '$ac_useropt'" + as_fn_error $? "invalid feature name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -956,7 +958,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: '$ac_useropt'" + as_fn_error $? "invalid feature name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1169,7 +1171,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: '$ac_useropt'" + as_fn_error $? "invalid package name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1185,7 +1187,7 @@ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: '$ac_useropt'" + as_fn_error $? "invalid package name: \`$ac_useropt'" ac_useropt_orig=$ac_useropt ac_useropt=`printf "%s\n" "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1215,8 +1217,8 @@ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) as_fn_error $? "unrecognized option: '$ac_option' -Try '$0 --help' for more information" + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) @@ -1224,7 +1226,7 @@ # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: '$ac_envvar'" ;; + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1274,7 +1276,7 @@ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done -# There might be people who depend on the old broken behavior: '$host' +# There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias @@ -1342,7 +1344,7 @@ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi -ac_msg="sources are in $srcdir, but 'cd $srcdir' does not work" +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` @@ -1370,7 +1372,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -'configure' configures iperf 3.18+ to adapt to many kinds of systems. +\`configure' configures iperf 3.18+ to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1384,11 +1386,11 @@ --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print 'checking ...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for '--cache-file=config.cache' + -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or '..'] + --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX @@ -1396,10 +1398,10 @@ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] -By default, 'make install' will install all the files in -'$ac_default_prefix/bin', '$ac_default_prefix/lib' etc. You can specify -an installation prefix other than '$ac_default_prefix' using '--prefix', -for instance '--prefix=\$HOME'. +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. For better control, use the options below. @@ -1454,13 +1456,8 @@ --disable-silent-rules verbose build output (undo: "make V=0") --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] - --enable-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] - --enable-aix-soname=aix|svr4|both - shared library versioning (aka "SONAME") variant to - provide on AIX, [default=aix]. --enable-dependency-tracking do not reject slow dependency extractors --disable-dependency-tracking @@ -1474,6 +1471,11 @@ Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --with-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot[=DIR] Search for dependent libraries within DIR (or the compiler's sysroot if not specified). @@ -1492,7 +1494,7 @@ User-defined run-time library search path. CPP C preprocessor -Use these variables to override the choices made by 'configure' or to help +Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to <https://github.com/esnet/iperf>. @@ -1561,9 +1563,9 @@ if $ac_init_version; then cat <<\_ACEOF iperf configure 3.18+ -generated by GNU Autoconf 2.72 +generated by GNU Autoconf 2.71 -Copyright (C) 2023 Free Software Foundation, Inc. +Copyright (C) 2021 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF @@ -1602,12 +1604,11 @@ } && test -s conftest.$ac_objext then : ac_retval=0 -else case e in #( - e) printf "%s\n" "$as_me: failed program was:" >&5 +else $as_nop + printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_retval=1 ;; -esac + ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval @@ -1645,12 +1646,11 @@ } then : ac_retval=0 -else case e in #( - e) printf "%s\n" "$as_me: failed program was:" >&5 +else $as_nop + printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_retval=1 ;; -esac + ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would @@ -1674,8 +1674,8 @@ if eval test \${$3+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> @@ -1683,12 +1683,10 @@ if ac_fn_c_try_compile "$LINENO" then : eval "$3=yes" -else case e in #( - e) eval "$3=no" ;; -esac +else $as_nop + eval "$3=no" fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi eval ac_res=\$$3 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 @@ -1708,15 +1706,15 @@ if eval test \${$3+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case <limits.h> declares $2. For example, HP-UX 11i <limits.h> declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (void); below. */ + which can conflict with char $2 (); below. */ #include <limits.h> #undef $2 @@ -1727,7 +1725,7 @@ #ifdef __cplusplus extern "C" #endif -char $2 (void); +char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ @@ -1746,13 +1744,11 @@ if ac_fn_c_try_link "$LINENO" then : eval "$3=yes" -else case e in #( - e) eval "$3=no" ;; -esac +else $as_nop + eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext ;; -esac + conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 @@ -1788,12 +1784,11 @@ } then : ac_retval=0 -else case e in #( - e) printf "%s\n" "$as_me: failed program was:" >&5 +else $as_nop + printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 - ac_retval=1 ;; -esac + ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval @@ -1812,8 +1807,8 @@ if eval test \${$4+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int @@ -1829,8 +1824,8 @@ if ac_fn_c_try_compile "$LINENO" then : eval "$4=yes" -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int @@ -1846,15 +1841,12 @@ if ac_fn_c_try_compile "$LINENO" then : eval "$4=yes" -else case e in #( - e) eval "$4=no" ;; -esac +else $as_nop + eval "$4=no" fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi eval ac_res=\$$4 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 @@ -1887,7 +1879,7 @@ running configure, to aid debugging if configure makes a mistake. It was created by iperf $as_me 3.18+, which was -generated by GNU Autoconf 2.72. Invocation command line was +generated by GNU Autoconf 2.71. Invocation command line was $ $0$ac_configure_args_raw @@ -2133,10 +2125,10 @@ printf "%s\n" "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ - || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} + || { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file -See 'config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5; } fi done @@ -2172,7 +2164,9 @@ /* Most of the following tests are stolen from RCS 5.7 src/conf.sh. */ struct buf { int x; }; struct buf * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (char **p, int i) +static char *e (p, i) + char **p; + int i; { return p[i]; } @@ -2186,21 +2180,6 @@ return s; } -/* C89 style stringification. */ -#define noexpand_stringify(a) #a -const char *stringified = noexpand_stringify(arbitrary+token=sequence); - -/* C89 style token pasting. Exercises some of the corner cases that - e.g. old MSVC gets wrong, but not very hard. */ -#define noexpand_concat(a,b) a##b -#define expand_concat(a,b) noexpand_concat(a,b) -extern int vA; -extern int vbee; -#define aye A -#define bee B -int *pvA = &expand_concat(v,aye); -int *pvbee = &noexpand_concat(v,bee); - /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not \xHH hex character constants. These do not provoke an error unfortunately, instead are silently treated @@ -2228,19 +2207,16 @@ # Test code for whether the C compiler supports C99 (global declarations) ac_c_conftest_c99_globals=' -/* Does the compiler advertise C99 conformance? */ +// Does the compiler advertise C99 conformance? #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L # error "Compiler does not advertise C99 conformance" #endif -// See if C++-style comments work. - #include <stdbool.h> extern int puts (const char *); extern int printf (const char *, ...); extern int dprintf (int, const char *, ...); extern void *malloc (size_t); -extern void free (void *); // Check varargs macros. These examples are taken from C99 6.10.3.5. // dprintf is used instead of fprintf to avoid needing to declare @@ -2290,6 +2266,7 @@ static inline int test_restrict (ccp restrict text) { + // See if C++-style comments work. // Iterate through items via the restricted pointer. // Also check for declarations in for loops. for (unsigned int i = 0; *(text+i) != '\''\0'\''; ++i) @@ -2355,8 +2332,6 @@ ia->datasize = 10; for (int i = 0; i < ia->datasize; ++i) ia->data[i] = i * 1.234; - // Work around memory leak warnings. - free (ia); // Check named initializers. struct named_init ni = { @@ -2378,7 +2353,7 @@ # Test code for whether the C compiler supports C11 (global declarations) ac_c_conftest_c11_globals=' -/* Does the compiler advertise C11 conformance? */ +// Does the compiler advertise C11 conformance? #if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L # error "Compiler does not advertise C11 conformance" #endif @@ -2570,9 +2545,8 @@ if $as_found then : -else case e in #( - e) as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 ;; -esac +else $as_nop + as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 fi @@ -2600,12 +2574,12 @@ eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&5 -printf "%s\n" "$as_me: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +printf "%s\n" "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was not set in the previous run" >&5 -printf "%s\n" "$as_me: error: '$ac_var' was not set in the previous run" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +printf "%s\n" "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) @@ -2614,18 +2588,18 @@ ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: '$ac_var' has changed since the previous run:" >&5 -printf "%s\n" "$as_me: error: '$ac_var' has changed since the previous run:" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +printf "%s\n" "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&5 -printf "%s\n" "$as_me: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +printf "%s\n" "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: '$ac_old_val'" >&5 -printf "%s\n" "$as_me: former value: '$ac_old_val'" >&2;} - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: '$ac_new_val'" >&5 -printf "%s\n" "$as_me: current value: '$ac_new_val'" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +printf "%s\n" "$as_me: former value: \`$ac_old_val'" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +printf "%s\n" "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. @@ -2641,11 +2615,11 @@ fi done if $ac_cache_corrupted; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 printf "%s\n" "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run '${MAKE-make} distclean' and/or 'rm $cache_file' + as_fn_error $? "run \`${MAKE-make} distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## @@ -2838,9 +2812,8 @@ enableval=$enable_static_bin; enable_static=yes enable_shared=no enable_static_bin=yes -else case e in #( - e) : ;; -esac +else $as_nop + : fi if test x$enable_static_bin = xno; then @@ -2871,7 +2844,7 @@ # Initialize the automake system -am__api_version='1.17' +am__api_version='1.16' @@ -2895,8 +2868,8 @@ if test ${ac_cv_path_install+y} then : printf %s "(cached) " >&6 -else case e in #( - e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +else $as_nop + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS @@ -2950,8 +2923,7 @@ IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir - ;; -esac + fi if test ${ac_cv_path_install+y}; then INSTALL=$ac_cv_path_install @@ -2974,165 +2946,6 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether sleep supports fractional seconds" >&5 -printf %s "checking whether sleep supports fractional seconds... " >&6; } -if test ${am_cv_sleep_fractional_seconds+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if sleep 0.001 2>/dev/null -then : - am_cv_sleep_fractional_seconds=yes -else case e in #( - e) am_cv_sleep_fractional_seconds=no ;; -esac -fi - ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_sleep_fractional_seconds" >&5 -printf "%s\n" "$am_cv_sleep_fractional_seconds" >&6; } - -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking filesystem timestamp resolution" >&5 -printf %s "checking filesystem timestamp resolution... " >&6; } -if test ${am_cv_filesystem_timestamp_resolution+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) # Default to the worst case. -am_cv_filesystem_timestamp_resolution=2 - -# Only try to go finer than 1 sec if sleep can do it. -# Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work, -# - 1 sec is not much of a win compared to 2 sec, and -# - it takes 2 seconds to perform the test whether 1 sec works. -# -# Instead, just use the default 2s on platforms that have 1s resolution, -# accept the extra 1s delay when using $sleep in the Automake tests, in -# exchange for not incurring the 2s delay for running the test for all -# packages. -# -am_try_resolutions= -if test "$am_cv_sleep_fractional_seconds" = yes; then - # Even a millisecond often causes a bunch of false positives, - # so just try a hundredth of a second. The time saved between .001 and - # .01 is not terribly consequential. - am_try_resolutions="0.01 0.1 $am_try_resolutions" -fi - -# In order to catch current-generation FAT out, we must *modify* files -# that already exist; the *creation* timestamp is finer. Use names -# that make ls -t sort them differently when they have equal -# timestamps than when they have distinct timestamps, keeping -# in mind that ls -t prints the *newest* file first. -rm -f conftest.ts? -: > conftest.ts1 -: > conftest.ts2 -: > conftest.ts3 - -# Make sure ls -t actually works. Do 'set' in a subshell so we don't -# clobber the current shell's arguments. (Outer-level square brackets -# are removed by m4; they're present so that m4 does not expand -# <dollar><star>; be careful, easy to get confused.) -if ( - set X `ls -t conftest.ts[12]` && - { - test "$*" != "X conftest.ts1 conftest.ts2" || - test "$*" != "X conftest.ts2 conftest.ts1"; - } -); then :; else - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - printf "%s\n" ""Bad output from ls -t: \"`ls -t conftest.ts[12]`\""" >&5 - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "ls -t produces unexpected output. -Make sure there is not a broken ls alias in your environment. -See 'config.log' for more details" "$LINENO" 5; } -fi - -for am_try_res in $am_try_resolutions; do - # Any one fine-grained sleep might happen to cross the boundary - # between two values of a coarser actual resolution, but if we do - # two fine-grained sleeps in a row, at least one of them will fall - # entirely within a coarse interval. - echo alpha > conftest.ts1 - sleep $am_try_res - echo beta > conftest.ts2 - sleep $am_try_res - echo gamma > conftest.ts3 - - # We assume that 'ls -t' will make use of high-resolution - # timestamps if the operating system supports them at all. - if (set X `ls -t conftest.ts?` && - test "$2" = conftest.ts3 && - test "$3" = conftest.ts2 && - test "$4" = conftest.ts1); then - # - # Ok, ls -t worked. If we're at a resolution of 1 second, we're done, - # because we don't need to test make. - make_ok=true - if test $am_try_res != 1; then - # But if we've succeeded so far with a subsecond resolution, we - # have one more thing to check: make. It can happen that - # everything else supports the subsecond mtimes, but make doesn't; - # notably on macOS, which ships make 3.81 from 2006 (the last one - # released under GPLv2). https://bugs.gnu.org/68808 - # - # We test $MAKE if it is defined in the environment, else "make". - # It might get overridden later, but our hope is that in practice - # it does not matter: it is the system "make" which is (by far) - # the most likely to be broken, whereas if the user overrides it, - # probably they did so with a better, or at least not worse, make. - # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html - # - # Create a Makefile (real tab character here): - rm -f conftest.mk - echo 'conftest.ts1: conftest.ts2' >conftest.mk - echo ' touch conftest.ts2' >>conftest.mk - # - # Now, running - # touch conftest.ts1; touch conftest.ts2; make - # should touch ts1 because ts2 is newer. This could happen by luck, - # but most often, it will fail if make's support is insufficient. So - # test for several consecutive successes. - # - # (We reuse conftest.ts[12] because we still want to modify existing - # files, not create new ones, per above.) - n=0 - make=${MAKE-make} - until test $n -eq 3; do - echo one > conftest.ts1 - sleep $am_try_res - echo two > conftest.ts2 # ts2 should now be newer than ts1 - if $make -f conftest.mk | grep 'up to date' >/dev/null; then - make_ok=false - break # out of $n loop - fi - n=`expr $n + 1` - done - fi - # - if $make_ok; then - # Everything we know to check worked out, so call this resolution good. - am_cv_filesystem_timestamp_resolution=$am_try_res - break # out of $am_try_res loop - fi - # Otherwise, we'll go on to check the next resolution. - fi -done -rm -f conftest.ts? -# (end _am_filesystem_timestamp_resolution) - ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_filesystem_timestamp_resolution" >&5 -printf "%s\n" "$am_cv_filesystem_timestamp_resolution" >&6; } - -# This check should not be cached, as it may vary across builds of -# different projects. { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 printf %s "checking whether build environment is sane... " >&6; } # Reject unsafe characters in $srcdir or the absolute working directory @@ -3153,45 +2966,49 @@ # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). -am_build_env_is_sane=no -am_has_slept=no -rm -f conftest.file -for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - test "$2" = conftest.file - ); then - am_build_env_is_sane=yes - break - fi - # Just in case. - sleep "$am_cv_filesystem_timestamp_resolution" - am_has_slept=yes -done +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_build_env_is_sane" >&5 -printf "%s\n" "$am_build_env_is_sane" >&6; } -if test "$am_build_env_is_sane" = no; then - as_fn_error $? "newly created file is older than distributed files! + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi - +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf "%s\n" "yes" >&6; } # If we didn't sleep, we still need to ensure time stamps of config.status and # generated files are strictly newer. am_sleep_pid= -if test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1 -then : - -else case e in #( - e) ( sleep "$am_cv_filesystem_timestamp_resolution" ) & +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & am_sleep_pid=$! - ;; -esac fi rm -f conftest.file @@ -3202,7 +3019,7 @@ test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. -# By default was 's,x,x', remove it if useless. +# By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`printf "%s\n" "$program_transform_name" | sed "$ac_script"` @@ -3245,8 +3062,8 @@ if test ${ac_cv_prog_STRIP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$STRIP"; then +else $as_nop + if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -3268,8 +3085,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then @@ -3291,8 +3107,8 @@ if test ${ac_cv_prog_ac_ct_STRIP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_STRIP"; then +else $as_nop + if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -3314,8 +3130,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then @@ -3351,8 +3166,8 @@ if test ${ac_cv_path_mkdir+y} then : printf %s "(cached) " >&6 -else case e in #( - e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +else $as_nop + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS @@ -3366,7 +3181,7 @@ as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext" || continue case `"$as_dir$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir ('*'coreutils) '* | \ - *'BusyBox '* | \ + 'BusyBox '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir$ac_prog$ac_exec_ext break 3;; @@ -3375,17 +3190,18 @@ done done IFS=$as_save_IFS - ;; -esac + fi test -d ./--version && rmdir ./--version if test ${ac_cv_path_mkdir+y}; then MKDIR_P="$ac_cv_path_mkdir -p" else - # As a last resort, use plain mkdir -p, - # in the hope it doesn't have the bugs of ancient mkdir. - MKDIR_P='mkdir -p' + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 @@ -3400,8 +3216,8 @@ if test ${ac_cv_prog_AWK+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$AWK"; then +else $as_nop + if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -3423,8 +3239,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then @@ -3446,8 +3261,8 @@ if eval test \${ac_cv_prog_make_${ac_make}_set+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat >conftest.make <<\_ACEOF +else $as_nop + cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' @@ -3459,8 +3274,7 @@ *) eval ac_cv_prog_make_${ac_make}_set=no;; esac -rm -f conftest.make ;; -esac +rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 @@ -3481,21 +3295,25 @@ fi rmdir .tst 2>/dev/null -AM_DEFAULT_VERBOSITY=1 # Check whether --enable-silent-rules was given. if test ${enable_silent_rules+y} then : enableval=$enable_silent_rules; fi +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac am_make=${MAKE-make} { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 printf %s "checking whether $am_make supports nested variables... " >&6; } if test ${am_cv_make_support_nested_variables+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if printf "%s\n" 'TRUE=$(BAR$(V)) +else $as_nop + if printf "%s\n" 'TRUE=$(BAR$(V)) BAR0=false BAR1=true V=1 @@ -3505,50 +3323,19 @@ am_cv_make_support_nested_variables=yes else am_cv_make_support_nested_variables=no -fi ;; -esac +fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 printf "%s\n" "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi AM_BACKSLASH='\' -am__rm_f_notfound= -if (rm -f && rm -fr && rm -rf) 2>/dev/null -then : - -else case e in #( - e) am__rm_f_notfound='""' ;; -esac -fi - - -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking xargs -n works" >&5 -printf %s "checking xargs -n works... " >&6; } -if test ${am_cv_xargs_n_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test "`echo 1 2 3 | xargs -n2 echo`" = "1 2 -3" -then : - am_cv_xargs_n_works=yes -else case e in #( - e) am_cv_xargs_n_works=no ;; -esac -fi ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_xargs_n_works" >&5 -printf "%s\n" "$am_cv_xargs_n_works" >&6; } -if test "$am_cv_xargs_n_works" = yes -then : - am__xargs_n='xargs -n' -else case e in #( - e) am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "" "$am__xargs_n_arg"; done; }' - ;; -esac -fi - if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." @@ -3632,12 +3419,89 @@ +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542> +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: <https://www.gnu.org/software/coreutils/>. -AM_DEFAULT_VERBOSITY=0 +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + +# Check whether --enable-silent-rules was given. +if test ${enable_silent_rules+y} +then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=0;; +esac +am_make=${MAKE-make} +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +printf %s "checking whether $am_make supports nested variables... " >&6; } +if test ${am_cv_make_support_nested_variables+y} +then : + printf %s "(cached) " >&6 +else $as_nop + if printf "%s\n" 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +printf "%s\n" "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + case `pwd` in *\ * | *\ *) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 @@ -3646,8 +3510,8 @@ -macro_version='2.5.4' -macro_revision='2.5.4' +macro_version='2.4.6' +macro_revision='2.4.6' @@ -3675,16 +3539,15 @@ if test ${ac_cv_build+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_build_alias=$build_alias +else $as_nop + ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"` test "x$ac_build_alias" = x && as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` || as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5 - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 printf "%s\n" "$ac_cv_build" >&6; } @@ -3711,15 +3574,14 @@ if test ${ac_cv_host+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test "x$host_alias" = x; then +else $as_nop + if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` || as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5 fi - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 printf "%s\n" "$ac_cv_host" >&6; } @@ -3896,8 +3758,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -3919,8 +3781,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -3942,8 +3803,8 @@ if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then +else $as_nop + if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -3965,8 +3826,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then @@ -4001,8 +3861,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4024,8 +3884,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -4047,8 +3906,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no @@ -4087,8 +3946,7 @@ ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@" fi fi -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -4112,8 +3970,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4135,8 +3993,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -4162,8 +4019,8 @@ if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then +else $as_nop + if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4185,8 +4042,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then @@ -4224,8 +4080,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4247,8 +4103,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -4270,8 +4125,8 @@ if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then +else $as_nop + if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -4293,8 +4148,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then @@ -4323,10 +4177,10 @@ fi -test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH -See 'config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 @@ -4398,8 +4252,8 @@ printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : - # Autoconf-2.13 could set the ac_cv_exeext variable to 'no'. -# So ignore a value of 'no', otherwise this would lead to 'EXEEXT = no' + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. @@ -4419,7 +4273,7 @@ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an '-o' + # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. @@ -4430,9 +4284,8 @@ done test "$ac_cv_exeext" = no && ac_cv_exeext= -else case e in #( - e) ac_file='' ;; -esac +else $as_nop + ac_file='' fi if test -z "$ac_file" then : @@ -4441,14 +4294,13 @@ printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables -See 'config.log' for more details" "$LINENO" 5; } -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf "%s\n" "yes" >&6; } ;; -esac +See \`config.log' for more details" "$LINENO" 5; } +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf "%s\n" "yes" >&6; } fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 printf %s "checking for C compiler default output file name... " >&6; } @@ -4472,10 +4324,10 @@ printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } then : - # If both 'conftest.exe' and 'conftest' are 'present' (well, observable) -# catch 'conftest.exe'. For instance with Cygwin, 'ls conftest' will -# work properly (i.e., refer to 'conftest.exe'), while it won't with -# 'rm'. + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in @@ -4485,12 +4337,11 @@ * ) break;; esac done -else case e in #( - e) { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +else $as_nop + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See 'config.log' for more details" "$LINENO" 5; } ;; -esac +See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 @@ -4506,8 +4357,6 @@ main (void) { FILE *f = fopen ("conftest.out", "w"); - if (!f) - return 1; return ferror (f) || fclose (f) != 0; ; @@ -4547,27 +4396,26 @@ if test "$cross_compiling" = maybe; then cross_compiling=yes else - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "cannot run C compiled programs. -If you meant to cross compile, use '--host'. -See 'config.log' for more details" "$LINENO" 5; } +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } fi fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 printf "%s\n" "$cross_compiling" >&6; } -rm -f conftest.$ac_ext conftest$ac_cv_exeext \ - conftest.o conftest.obj conftest.out +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 printf %s "checking for suffix of object files... " >&6; } if test ${ac_cv_objext+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4599,18 +4447,16 @@ break;; esac done -else case e in #( - e) printf "%s\n" "$as_me: failed program was:" >&5 +else $as_nop + printf "%s\n" "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +{ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile -See 'config.log' for more details" "$LINENO" 5; } ;; -esac +See \`config.log' for more details" "$LINENO" 5; } fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext ;; -esac +rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 printf "%s\n" "$ac_cv_objext" >&6; } @@ -4621,8 +4467,8 @@ if test ${ac_cv_c_compiler_gnu+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4639,14 +4485,12 @@ if ac_fn_c_try_compile "$LINENO" then : ac_compiler_gnu=yes -else case e in #( - e) ac_compiler_gnu=no ;; -esac +else $as_nop + ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 printf "%s\n" "$ac_cv_c_compiler_gnu" >&6; } @@ -4664,8 +4508,8 @@ if test ${ac_cv_prog_cc_g+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_save_c_werror_flag=$ac_c_werror_flag +else $as_nop + ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" @@ -4683,8 +4527,8 @@ if ac_fn_c_try_compile "$LINENO" then : ac_cv_prog_cc_g=yes -else case e in #( - e) CFLAGS="" +else $as_nop + CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -4699,8 +4543,8 @@ if ac_fn_c_try_compile "$LINENO" then : -else case e in #( - e) ac_c_werror_flag=$ac_save_c_werror_flag +else $as_nop + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -4717,15 +4561,12 @@ then : ac_cv_prog_cc_g=yes fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag ;; -esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 printf "%s\n" "$ac_cv_prog_cc_g" >&6; } @@ -4752,8 +4593,8 @@ if test ${ac_cv_prog_cc_c11+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c11=no +else $as_nop + ac_cv_prog_cc_c11=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -4770,28 +4611,25 @@ test "x$ac_cv_prog_cc_c11" != "xno" && break done rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac +CC=$ac_save_CC fi if test "x$ac_cv_prog_cc_c11" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c11" = x +else $as_nop + if test "x$ac_cv_prog_cc_c11" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 printf "%s\n" "$ac_cv_prog_cc_c11" >&6; } - CC="$CC $ac_cv_prog_cc_c11" ;; -esac + CC="$CC $ac_cv_prog_cc_c11" fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11 - ac_prog_cc_stdc=c11 ;; -esac + ac_prog_cc_stdc=c11 fi fi if test x$ac_prog_cc_stdc = xno @@ -4801,8 +4639,8 @@ if test ${ac_cv_prog_cc_c99+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c99=no +else $as_nop + ac_cv_prog_cc_c99=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -4819,28 +4657,25 @@ test "x$ac_cv_prog_cc_c99" != "xno" && break done rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac +CC=$ac_save_CC fi if test "x$ac_cv_prog_cc_c99" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c99" = x +else $as_nop + if test "x$ac_cv_prog_cc_c99" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 printf "%s\n" "$ac_cv_prog_cc_c99" >&6; } - CC="$CC $ac_cv_prog_cc_c99" ;; -esac + CC="$CC $ac_cv_prog_cc_c99" fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 - ac_prog_cc_stdc=c99 ;; -esac + ac_prog_cc_stdc=c99 fi fi if test x$ac_prog_cc_stdc = xno @@ -4850,8 +4685,8 @@ if test ${ac_cv_prog_cc_c89+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c89=no +else $as_nop + ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -4868,28 +4703,25 @@ test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac +CC=$ac_save_CC fi if test "x$ac_cv_prog_cc_c89" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c89" = x +else $as_nop + if test "x$ac_cv_prog_cc_c89" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 printf "%s\n" "$ac_cv_prog_cc_c89" >&6; } - CC="$CC $ac_cv_prog_cc_c89" ;; -esac + CC="$CC $ac_cv_prog_cc_c89" fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 - ac_prog_cc_stdc=c89 ;; -esac + ac_prog_cc_stdc=c89 fi fi @@ -4910,8 +4742,8 @@ if test ${am_cv_prog_cc_c_o+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -4941,8 +4773,7 @@ fi done rm -f core conftest* - unset am_i ;; -esac + unset am_i fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 printf "%s\n" "$am_cv_prog_cc_c_o" >&6; } @@ -4968,8 +4799,8 @@ if test ${am_cv_CC_dependencies_compiler_type+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +else $as_nop + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up @@ -5056,7 +4887,7 @@ # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thus: + # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported @@ -5073,8 +4904,7 @@ else am_cv_CC_dependencies_compiler_type=none fi - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 printf "%s\n" "$am_cv_CC_dependencies_compiler_type" >&6; } @@ -5096,8 +4926,8 @@ if test ${ac_cv_path_SED+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ +else $as_nop + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ for ac_i in 1 2 3 4 5 6 7; do ac_script="$ac_script$as_nl$ac_script" done @@ -5122,10 +4952,9 @@ as_fn_executable_p "$ac_path_SED" || continue # Check for GNU ac_path_SED and select it if it is found. # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in #( +case `"$ac_path_SED" --version 2>&1` in *GNU*) ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -#( *) ac_count=0 printf %s 0123456789 >"conftest.in" @@ -5160,8 +4989,7 @@ else ac_cv_path_SED=$SED fi - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 printf "%s\n" "$ac_cv_path_SED" >&6; } @@ -5186,8 +5014,8 @@ if test ${ac_cv_path_GREP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$GREP"; then +else $as_nop + if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -5206,10 +5034,9 @@ as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in #( +case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -#( *) ac_count=0 printf %s 0123456789 >"conftest.in" @@ -5244,8 +5071,7 @@ else ac_cv_path_GREP=$GREP fi - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 printf "%s\n" "$ac_cv_path_GREP" >&6; } @@ -5257,8 +5083,8 @@ if test ${ac_cv_path_EGREP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 +else $as_nop + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then @@ -5280,10 +5106,9 @@ as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in #( +case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -#( *) ac_count=0 printf %s 0123456789 >"conftest.in" @@ -5319,23 +5144,20 @@ ac_cv_path_EGREP=$EGREP fi - fi ;; -esac + fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 printf "%s\n" "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" - EGREP_TRADITIONAL=$EGREP - ac_cv_path_EGREP_TRADITIONAL=$EGREP { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 printf %s "checking for fgrep... " >&6; } if test ${ac_cv_path_FGREP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 +else $as_nop + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 then ac_cv_path_FGREP="$GREP -F" else if test -z "$FGREP"; then @@ -5357,10 +5179,9 @@ as_fn_executable_p "$ac_path_FGREP" || continue # Check for GNU ac_path_FGREP and select it if it is found. # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in #( +case `"$ac_path_FGREP" --version 2>&1` in *GNU*) ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -#( *) ac_count=0 printf %s 0123456789 >"conftest.in" @@ -5396,8 +5217,7 @@ ac_cv_path_FGREP=$FGREP fi - fi ;; -esac + fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 printf "%s\n" "$ac_cv_path_FGREP" >&6; } @@ -5428,9 +5248,8 @@ if test ${with_gnu_ld+y} then : withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes -else case e in #( - e) with_gnu_ld=no ;; -esac +else $as_nop + with_gnu_ld=no fi ac_prog=ld @@ -5439,7 +5258,7 @@ { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 printf %s "checking for ld used by $CC... " >&6; } case $host in - *-*-mingw* | *-*-windows*) + *-*-mingw*) # gcc leaves a trailing carriage return, which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) @@ -5475,8 +5294,8 @@ if test ${lt_cv_path_LD+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$LD"; then +else $as_nop + if test -z "$LD"; then lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS=$lt_save_ifs @@ -5499,8 +5318,7 @@ IFS=$lt_save_ifs else lt_cv_path_LD=$LD # Let the user override the test with a path. -fi ;; -esac +fi fi LD=$lt_cv_path_LD @@ -5517,8 +5335,8 @@ if test ${lt_cv_prog_gnu_ld+y} then : printf %s "(cached) " >&6 -else case e in #( - e) # I'd rather use --version here, but apparently some GNU lds only accept -v. +else $as_nop + # I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 </dev/null` in *GNU* | *'with BFD'*) lt_cv_prog_gnu_ld=yes @@ -5526,7 +5344,6 @@ *) lt_cv_prog_gnu_ld=no ;; -esac ;; esac fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 @@ -5546,8 +5363,8 @@ if test ${lt_cv_path_NM+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$NM"; then +else $as_nop + if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM=$NM else @@ -5568,16 +5385,16 @@ # Tru64's nm complains that /dev/null is an invalid object file # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty case $build_os in - mingw* | windows*) lt_bad_file=conftest.nm/nofile ;; + mingw*) lt_bad_file=conftest.nm/nofile ;; *) lt_bad_file=/dev/null ;; esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in + case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in *$lt_bad_file* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break 2 ;; *) - case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break 2 @@ -5594,8 +5411,7 @@ IFS=$lt_save_ifs done : ${lt_cv_path_NM=no} -fi ;; -esac +fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 printf "%s\n" "$lt_cv_path_NM" >&6; } @@ -5616,8 +5432,8 @@ if test ${ac_cv_prog_DUMPBIN+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$DUMPBIN"; then +else $as_nop + if test -n "$DUMPBIN"; then ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -5639,8 +5455,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi DUMPBIN=$ac_cv_prog_DUMPBIN if test -n "$DUMPBIN"; then @@ -5666,8 +5481,8 @@ if test ${ac_cv_prog_ac_ct_DUMPBIN+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_DUMPBIN"; then +else $as_nop + if test -n "$ac_ct_DUMPBIN"; then ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -5689,8 +5504,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN if test -n "$ac_ct_DUMPBIN"; then @@ -5718,7 +5532,7 @@ fi fi - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in *COFF*) DUMPBIN="$DUMPBIN -symbols -headers" ;; @@ -5744,8 +5558,8 @@ if test ${lt_cv_nm_interface+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_nm_interface="BSD nm" +else $as_nop + lt_cv_nm_interface="BSD nm" echo "int some_variable = 0;" > conftest.$ac_ext (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) (eval "$ac_compile" 2>conftest.err) @@ -5758,8 +5572,7 @@ if $GREP 'External.*some_variable' conftest.out > /dev/null; then lt_cv_nm_interface="MS dumpbin" fi - rm -f conftest* ;; -esac + rm -f conftest* fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 printf "%s\n" "$lt_cv_nm_interface" >&6; } @@ -5781,8 +5594,8 @@ if test ${lt_cv_sys_max_cmd_len+y} then : printf %s "(cached) " >&6 -else case e in #( - e) i=0 +else $as_nop + i=0 teststring=ABCD case $build_os in @@ -5794,14 +5607,14 @@ lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; - gnu* | ironclad*) - # Under GNU Hurd and Ironclad, this test is not required because there - # is no limit to the length of command line arguments. + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; - cygwin* | mingw* | windows* | cegcc*) + cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, @@ -5823,7 +5636,7 @@ lt_cv_sys_max_cmd_len=8192; ;; - darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*) + bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` @@ -5866,7 +5679,7 @@ sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[ ]//'` + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` else lt_cv_sys_max_cmd_len=32768 fi @@ -5904,8 +5717,7 @@ fi ;; esac - ;; -esac + fi if test -n "$lt_cv_sys_max_cmd_len"; then @@ -5962,11 +5774,11 @@ if test ${lt_cv_to_host_file_cmd+y} then : printf %s "(cached) " >&6 -else case e in #( - e) case $host in +else $as_nop + case $host in *-*-mingw* ) case $build in - *-*-mingw* | *-*-windows* ) # actually msys + *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 ;; *-*-cygwin* ) @@ -5979,7 +5791,7 @@ ;; *-*-cygwin* ) case $build in - *-*-mingw* | *-*-windows* ) # actually msys + *-*-mingw* ) # actually msys lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin ;; *-*-cygwin* ) @@ -5994,8 +5806,7 @@ lt_cv_to_host_file_cmd=func_convert_file_noop ;; esac - ;; -esac + fi to_host_file_cmd=$lt_cv_to_host_file_cmd @@ -6011,20 +5822,19 @@ if test ${lt_cv_to_tool_file_cmd+y} then : printf %s "(cached) " >&6 -else case e in #( - e) #assume ordinary cross tools, or native build. +else $as_nop + #assume ordinary cross tools, or native build. lt_cv_to_tool_file_cmd=func_convert_file_noop case $host in - *-*-mingw* | *-*-windows* ) + *-*-mingw* ) case $build in - *-*-mingw* | *-*-windows* ) # actually msys + *-*-mingw* ) # actually msys lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 ;; esac ;; esac - ;; -esac + fi to_tool_file_cmd=$lt_cv_to_tool_file_cmd @@ -6040,9 +5850,8 @@ if test ${lt_cv_ld_reload_flag+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ld_reload_flag='-r' ;; -esac +else $as_nop + lt_cv_ld_reload_flag='-r' fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 printf "%s\n" "$lt_cv_ld_reload_flag" >&6; } @@ -6053,7 +5862,7 @@ esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) if test yes != "$GCC"; then reload_cmds=false fi @@ -6075,56 +5884,6 @@ -# Extract the first word of "file", so it can be a program name with args. -set dummy file; ac_word=$2 -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_FILECMD+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$FILECMD"; then - ac_cv_prog_FILECMD="$FILECMD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_FILECMD="file" - printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_FILECMD" && ac_cv_prog_FILECMD=":" -fi ;; -esac -fi -FILECMD=$ac_cv_prog_FILECMD -if test -n "$FILECMD"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $FILECMD" >&5 -printf "%s\n" "$FILECMD" >&6; } -else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } -fi - - - - - - - - if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. set dummy ${ac_tool_prefix}objdump; ac_word=$2 @@ -6133,8 +5892,8 @@ if test ${ac_cv_prog_OBJDUMP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$OBJDUMP"; then +else $as_nop + if test -n "$OBJDUMP"; then ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -6156,8 +5915,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi OBJDUMP=$ac_cv_prog_OBJDUMP if test -n "$OBJDUMP"; then @@ -6179,8 +5937,8 @@ if test ${ac_cv_prog_ac_ct_OBJDUMP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_OBJDUMP"; then +else $as_nop + if test -n "$ac_ct_OBJDUMP"; then ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -6202,8 +5960,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP if test -n "$ac_ct_OBJDUMP"; then @@ -6244,8 +6001,8 @@ if test ${lt_cv_deplibs_check_method+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_file_magic_cmd='$MAGIC_CMD' +else $as_nop + lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support @@ -6253,6 +6010,7 @@ # 'none' -- dependencies not supported. # 'unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # that responds to the $file_magic_cmd with a given extended regex. # If you have 'file' or equivalent on your system and you're not sure @@ -6269,7 +6027,7 @@ bsdi[45]*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='$FILECMD -L' + lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; @@ -6279,7 +6037,7 @@ lt_cv_file_magic_cmd='func_win32_libid' ;; -mingw* | windows* | pw32*) +mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. @@ -6288,7 +6046,7 @@ lt_cv_file_magic_cmd='func_win32_libid' else # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64|pe-aarch64)' + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; @@ -6303,14 +6061,14 @@ lt_cv_deplibs_check_method=pass_all ;; -freebsd* | dragonfly* | midnightbsd*) +freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac @@ -6324,7 +6082,7 @@ ;; hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' @@ -6361,10 +6119,6 @@ lt_cv_deplibs_check_method=pass_all ;; -*-mlibc) - lt_cv_deplibs_check_method=pass_all - ;; - netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' @@ -6375,7 +6129,7 @@ newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; @@ -6383,7 +6137,7 @@ lt_cv_deplibs_check_method=pass_all ;; -openbsd*) +openbsd* | bitrig*) if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else @@ -6399,10 +6153,6 @@ lt_cv_deplibs_check_method=pass_all ;; -serenity*) - lt_cv_deplibs_check_method=pass_all - ;; - solaris*) lt_cv_deplibs_check_method=pass_all ;; @@ -6445,8 +6195,7 @@ lt_cv_deplibs_check_method=pass_all ;; esac - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 printf "%s\n" "$lt_cv_deplibs_check_method" >&6; } @@ -6455,7 +6204,7 @@ want_nocaseglob=no if test "$build" = "$host"; then case $host_os in - mingw* | windows* | pw32*) + mingw* | pw32*) if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then want_nocaseglob=yes else @@ -6498,8 +6247,8 @@ if test ${ac_cv_prog_DLLTOOL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$DLLTOOL"; then +else $as_nop + if test -n "$DLLTOOL"; then ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -6521,8 +6270,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi DLLTOOL=$ac_cv_prog_DLLTOOL if test -n "$DLLTOOL"; then @@ -6544,8 +6292,8 @@ if test ${ac_cv_prog_ac_ct_DLLTOOL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_DLLTOOL"; then +else $as_nop + if test -n "$ac_ct_DLLTOOL"; then ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -6567,8 +6315,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL if test -n "$ac_ct_DLLTOOL"; then @@ -6610,11 +6357,11 @@ if test ${lt_cv_sharedlib_from_linklib_cmd+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_sharedlib_from_linklib_cmd='unknown' +else $as_nop + lt_cv_sharedlib_from_linklib_cmd='unknown' case $host_os in -cygwin* | mingw* | windows* | pw32* | cegcc*) +cygwin* | mingw* | pw32* | cegcc*) # two different shell functions defined in ltmain.sh; # decide which one to use based on capabilities of $DLLTOOL case `$DLLTOOL --help 2>&1` in @@ -6631,8 +6378,7 @@ lt_cv_sharedlib_from_linklib_cmd=$ECHO ;; esac - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 printf "%s\n" "$lt_cv_sharedlib_from_linklib_cmd" >&6; } @@ -6647,110 +6393,6 @@ if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_RANLIB+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -printf "%s\n" "$RANLIB" >&6; } -else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_RANLIB+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -printf "%s\n" "$ac_ct_RANLIB" >&6; } -else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. @@ -6760,8 +6402,8 @@ if test ${ac_cv_prog_AR+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$AR"; then +else $as_nop + if test -n "$AR"; then ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -6783,8 +6425,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi AR=$ac_cv_prog_AR if test -n "$AR"; then @@ -6810,8 +6451,8 @@ if test ${ac_cv_prog_ac_ct_AR+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_AR"; then +else $as_nop + if test -n "$ac_ct_AR"; then ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -6833,8 +6474,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_AR=$ac_cv_prog_ac_ct_AR if test -n "$ac_ct_AR"; then @@ -6863,29 +6503,13 @@ fi : ${AR=ar} +: ${AR_FLAGS=cr} -# Use ARFLAGS variable as AR's operation code to sync the variable naming with -# Automake. If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have -# higher priority because that's what people were doing historically (setting -# ARFLAGS for automake and AR_FLAGS for libtool). FIXME: Make the AR_FLAGS -# variable obsoleted/removed. - -test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr} -lt_ar_flags=$AR_FLAGS - - - - - - -# Make AR_FLAGS overridable by 'make ARFLAGS='. Don't try to run-time override -# by AR_FLAGS because that was never working and AR_FLAGS is about to die. - @@ -6896,8 +6520,8 @@ if test ${lt_cv_ar_at_file+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ar_at_file=no +else $as_nop + lt_cv_ar_at_file=no cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -6934,8 +6558,7 @@ fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 printf "%s\n" "$lt_cv_ar_at_file" >&6; } @@ -6960,8 +6583,8 @@ if test ${ac_cv_prog_STRIP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$STRIP"; then +else $as_nop + if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -6983,8 +6606,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then @@ -7006,8 +6628,8 @@ if test ${ac_cv_prog_ac_ct_STRIP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_STRIP"; then +else $as_nop + if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -7029,8 +6651,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then @@ -7063,6 +6684,107 @@ +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_RANLIB+y} +then : + printf %s "(cached) " >&6 +else $as_nop + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +printf "%s\n" "$RANLIB" >&6; } +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf "%s\n" "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_RANLIB+y} +then : + printf %s "(cached) " >&6 +else $as_nop + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + printf "%s\n" "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +printf "%s\n" "$ac_ct_RANLIB" >&6; } +else + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf "%s\n" "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf "%s\n" "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi test -z "$RANLIB" && RANLIB=: @@ -7077,8 +6799,15 @@ old_postuninstall_cmds= if test -n "$RANLIB"; then + case $host_os in + bitrig* | openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in @@ -7142,8 +6871,8 @@ if test ${lt_cv_sys_global_symbol_pipe+y} then : printf %s "(cached) " >&6 -else case e in #( - e) +else $as_nop + # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] @@ -7158,7 +6887,7 @@ aix*) symcode='[BCDT]' ;; -cygwin* | mingw* | windows* | pw32* | cegcc*) +cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; hpux*) @@ -7173,7 +6902,7 @@ symcode='[BCDEGQRST]' ;; solaris*) - symcode='[BCDRT]' + symcode='[BDRT]' ;; sco3.2v5*) symcode='[DT]' @@ -7197,7 +6926,7 @@ if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'" + lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" # Adjust the below global symbol transforms to fixup imported variables. lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" @@ -7215,20 +6944,20 @@ # Transform an extracted symbol line into a proper C declaration. # Some systems (esp. on ia64) link data and code symbols differently, # so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="$SED -n"\ +lt_cv_sys_global_symbol_to_cdecl="sed -n"\ $lt_cdecl_hook\ " -e 's/^T .* \(.*\)$/extern int \1();/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\ +lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ $lt_c_name_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" # Transform an extracted symbol line into symbol name with lib prefix and # symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ $lt_c_name_lib_hook\ " -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ " -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ @@ -7237,7 +6966,7 @@ # Handle CRLF in mingw tool chain opt_cr= case $build_os in -mingw* | windows*) +mingw*) opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac @@ -7252,7 +6981,7 @@ if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++ or ICC, + # Also find C++ and __fastcall symbols from MSVC++, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ @@ -7270,9 +6999,9 @@ " s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ " ' prfx=^$ac_symprfx" else - lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'" + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no @@ -7288,7 +7017,7 @@ #ifdef __cplusplus } #endif -int main(void){nm_test_var='a';nm_test_func();return(0);} +int main(){nm_test_var='a';nm_test_func();return(0);} _LT_EOF if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 @@ -7395,8 +7124,7 @@ lt_cv_sys_global_symbol_pipe= fi done - ;; -esac + fi if test -z "$lt_cv_sys_global_symbol_pipe"; then @@ -7460,9 +7188,8 @@ if test ${with_sysroot+y} then : withval=$with_sysroot; -else case e in #( - e) with_sysroot=no ;; -esac +else $as_nop + with_sysroot=no fi @@ -7470,13 +7197,11 @@ case $with_sysroot in #( yes) if test yes = "$GCC"; then - # Trim trailing / since we'll always append absolute paths and we want - # to avoid //, if only for less confusing output for the user. - lt_sysroot=`$CC --print-sysroot 2>/dev/null | $SED 's:/\+$::'` + lt_sysroot=`$CC --print-sysroot 2>/dev/null` fi ;; #( /*) - lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"` + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` ;; #( no|'') ;; #( @@ -7499,8 +7224,8 @@ if test ${ac_cv_path_lt_DD+y} then : printf %s "(cached) " >&6 -else case e in #( - e) printf 0123456789abcdef0123456789abcdef >conftest.i +else $as_nop + printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i : ${lt_DD:=$DD} if test -z "$lt_DD"; then @@ -7536,8 +7261,7 @@ ac_cv_path_lt_DD=$lt_DD fi -rm -f conftest.i conftest2.i conftest.out ;; -esac +rm -f conftest.i conftest2.i conftest.out fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 printf "%s\n" "$ac_cv_path_lt_DD" >&6; } @@ -7548,8 +7272,8 @@ if test ${lt_cv_truncate_bin+y} then : printf %s "(cached) " >&6 -else case e in #( - e) printf 0123456789abcdef0123456789abcdef >conftest.i +else $as_nop + printf 0123456789abcdef0123456789abcdef >conftest.i cat conftest.i conftest.i >conftest2.i lt_cv_truncate_bin= if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then @@ -7557,8 +7281,7 @@ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" fi rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" ;; -esac +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 printf "%s\n" "$lt_cv_truncate_bin" >&6; } @@ -7603,7 +7326,7 @@ ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE=32 ;; @@ -7624,7 +7347,7 @@ printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then if test yes = "$lt_cv_prog_gnu_ld"; then - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; @@ -7636,7 +7359,7 @@ ;; esac else - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -7662,7 +7385,7 @@ printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then emul=elf - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) emul="${emul}32" ;; @@ -7670,7 +7393,7 @@ emul="${emul}64" ;; esac - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *MSB*) emul="${emul}btsmip" ;; @@ -7678,7 +7401,7 @@ emul="${emul}ltsmip" ;; esac - case `$FILECMD conftest.$ac_objext` in + case `/usr/bin/file conftest.$ac_objext` in *N32*) emul="${emul}n32" ;; @@ -7689,7 +7412,7 @@ ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*|x86_64-gnu*) +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out what ABI is being produced by ac_compile, and set linker # options accordingly. Note that the listed cases only cover the # situations where additional linker options are needed (such as when @@ -7702,14 +7425,14 @@ ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - case `$FILECMD conftest.o` in + case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; - x86_64-*linux*|x86_64-gnu*) - case `$FILECMD conftest.o` in + x86_64-*linux*) + case `/usr/bin/file conftest.o` in *x86-64*) LD="${LD-ld} -m elf32_x86_64" ;; @@ -7737,7 +7460,7 @@ x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; - x86_64-*linux*|x86_64-gnu*) + x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; powerpcle-*linux*) @@ -7768,8 +7491,8 @@ if test ${lt_cv_cc_needs_belf+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_ext=c +else $as_nop + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -7789,9 +7512,8 @@ if ac_fn_c_try_link "$LINENO" then : lt_cv_cc_needs_belf=yes -else case e in #( - e) lt_cv_cc_needs_belf=no ;; -esac +else $as_nop + lt_cv_cc_needs_belf=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext @@ -7800,8 +7522,7 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 printf "%s\n" "$lt_cv_cc_needs_belf" >&6; } @@ -7819,7 +7540,7 @@ ac_status=$? printf "%s\n" "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then - case `$FILECMD conftest.o` in + case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) @@ -7859,8 +7580,8 @@ if test ${ac_cv_prog_MANIFEST_TOOL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$MANIFEST_TOOL"; then +else $as_nop + if test -n "$MANIFEST_TOOL"; then ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -7882,8 +7603,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL if test -n "$MANIFEST_TOOL"; then @@ -7905,8 +7625,8 @@ if test ${ac_cv_prog_ac_ct_MANIFEST_TOOL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_MANIFEST_TOOL"; then +else $as_nop + if test -n "$ac_ct_MANIFEST_TOOL"; then ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -7928,8 +7648,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL if test -n "$ac_ct_MANIFEST_TOOL"; then @@ -7958,23 +7677,22 @@ test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 printf %s "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if test ${lt_cv_path_manifest_tool+y} +if test ${lt_cv_path_mainfest_tool+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_path_manifest_tool=no +else $as_nop + lt_cv_path_mainfest_tool=no echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out cat conftest.err >&5 if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_manifest_tool=yes + lt_cv_path_mainfest_tool=yes fi - rm -f conftest* ;; -esac + rm -f conftest* fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_manifest_tool" >&5 -printf "%s\n" "$lt_cv_path_manifest_tool" >&6; } -if test yes != "$lt_cv_path_manifest_tool"; then +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +printf "%s\n" "$lt_cv_path_mainfest_tool" >&6; } +if test yes != "$lt_cv_path_mainfest_tool"; then MANIFEST_TOOL=: fi @@ -7993,8 +7711,8 @@ if test ${ac_cv_prog_DSYMUTIL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$DSYMUTIL"; then +else $as_nop + if test -n "$DSYMUTIL"; then ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8016,8 +7734,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi DSYMUTIL=$ac_cv_prog_DSYMUTIL if test -n "$DSYMUTIL"; then @@ -8039,8 +7756,8 @@ if test ${ac_cv_prog_ac_ct_DSYMUTIL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_DSYMUTIL"; then +else $as_nop + if test -n "$ac_ct_DSYMUTIL"; then ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8062,8 +7779,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL if test -n "$ac_ct_DSYMUTIL"; then @@ -8097,8 +7813,8 @@ if test ${ac_cv_prog_NMEDIT+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$NMEDIT"; then +else $as_nop + if test -n "$NMEDIT"; then ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8120,8 +7836,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi NMEDIT=$ac_cv_prog_NMEDIT if test -n "$NMEDIT"; then @@ -8143,8 +7858,8 @@ if test ${ac_cv_prog_ac_ct_NMEDIT+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_NMEDIT"; then +else $as_nop + if test -n "$ac_ct_NMEDIT"; then ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8166,8 +7881,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT if test -n "$ac_ct_NMEDIT"; then @@ -8201,8 +7915,8 @@ if test ${ac_cv_prog_LIPO+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$LIPO"; then +else $as_nop + if test -n "$LIPO"; then ac_cv_prog_LIPO="$LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8224,8 +7938,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi LIPO=$ac_cv_prog_LIPO if test -n "$LIPO"; then @@ -8247,8 +7960,8 @@ if test ${ac_cv_prog_ac_ct_LIPO+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_LIPO"; then +else $as_nop + if test -n "$ac_ct_LIPO"; then ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8270,8 +7983,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO if test -n "$ac_ct_LIPO"; then @@ -8305,8 +8017,8 @@ if test ${ac_cv_prog_OTOOL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$OTOOL"; then +else $as_nop + if test -n "$OTOOL"; then ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8328,8 +8040,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi OTOOL=$ac_cv_prog_OTOOL if test -n "$OTOOL"; then @@ -8351,8 +8062,8 @@ if test ${ac_cv_prog_ac_ct_OTOOL+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_OTOOL"; then +else $as_nop + if test -n "$ac_ct_OTOOL"; then ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8374,8 +8085,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL if test -n "$ac_ct_OTOOL"; then @@ -8409,8 +8119,8 @@ if test ${ac_cv_prog_OTOOL64+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$OTOOL64"; then +else $as_nop + if test -n "$OTOOL64"; then ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8432,8 +8142,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi OTOOL64=$ac_cv_prog_OTOOL64 if test -n "$OTOOL64"; then @@ -8455,8 +8164,8 @@ if test ${ac_cv_prog_ac_ct_OTOOL64+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_OTOOL64"; then +else $as_nop + if test -n "$ac_ct_OTOOL64"; then ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -8478,8 +8187,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 if test -n "$ac_ct_OTOOL64"; then @@ -8536,8 +8244,8 @@ if test ${lt_cv_apple_cc_single_mod+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_apple_cc_single_mod=no +else $as_nop + lt_cv_apple_cc_single_mod=no if test -z "$LT_MULTI_MODULE"; then # By default we will add the -single_module flag. You can override # by either setting the environment variable LT_MULTI_MODULE @@ -8563,58 +8271,18 @@ fi rm -rf libconftest.dylib* rm -f conftest.* - fi ;; -esac + fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 printf "%s\n" "$lt_cv_apple_cc_single_mod" >&6; } - # Feature test to disable chained fixups since it is not - # compatible with '-undefined dynamic_lookup' - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for -no_fixup_chains linker flag" >&5 -printf %s "checking for -no_fixup_chains linker flag... " >&6; } -if test ${lt_cv_support_no_fixup_chains+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-no_fixup_chains" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - lt_cv_support_no_fixup_chains=yes -else case e in #( - e) lt_cv_support_no_fixup_chains=no - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - - ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_support_no_fixup_chains" >&5 -printf "%s\n" "$lt_cv_support_no_fixup_chains" >&6; } - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 printf %s "checking for -exported_symbols_list linker flag... " >&6; } if test ${lt_cv_ld_exported_symbols_list+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ld_exported_symbols_list=no +else $as_nop + lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" @@ -8632,15 +8300,13 @@ if ac_fn_c_try_link "$LINENO" then : lt_cv_ld_exported_symbols_list=yes -else case e in #( - e) lt_cv_ld_exported_symbols_list=no ;; -esac +else $as_nop + lt_cv_ld_exported_symbols_list=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 printf "%s\n" "$lt_cv_ld_exported_symbols_list" >&6; } @@ -8650,19 +8316,19 @@ if test ${lt_cv_ld_force_load+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ld_force_load=no +else $as_nop + lt_cv_ld_force_load=no cat > conftest.c << _LT_EOF int forced_loaded() { return 2;} _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5 - $AR $AR_FLAGS libconftest.a conftest.o 2>&5 + echo "$AR cr libconftest.a conftest.o" >&5 + $AR cr libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF -int main(void) { return 0;} +int main() { return 0;} _LT_EOF echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err @@ -8676,8 +8342,7 @@ fi rm -f conftest.err libconftest.a conftest conftest.c rm -rf conftest.dSYM - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 printf "%s\n" "$lt_cv_ld_force_load" >&6; } @@ -8686,37 +8351,23 @@ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; darwin1.*) _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) - case $MACOSX_DEPLOYMENT_TARGET,$host in - 10.[012],*|,*powerpc*-darwin[5-8]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - *) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' - if test yes = "$lt_cv_support_no_fixup_chains"; then - as_fn_append _lt_dar_allow_undefined ' $wl-no_fixup_chains' - fi - ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[912]*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; + 10.[012][,.]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + 10.*|11.*) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; esac ;; esac if test yes = "$lt_cv_apple_cc_single_mod"; then _lt_dar_single_mod='$single_module' fi - _lt_dar_needs_single_mod=no - case $host_os in - rhapsody* | darwin1.*) - _lt_dar_needs_single_mod=yes ;; - darwin*) - # When targeting Mac OS X 10.4 (darwin 8) or later, - # -single_module is the default and -multi_module is unsupported. - # The toolchain on macOS 10.14 (darwin 18) and later cannot - # target any OS version that needs -single_module. - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*-darwin[567].*|10.[0-3],*-darwin[5-9].*|10.[0-3],*-darwin1[0-7].*) - _lt_dar_needs_single_mod=yes ;; - esac - ;; - esac if test yes = "$lt_cv_ld_exported_symbols_list"; then _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' else @@ -8836,9 +8487,8 @@ IFS=$lt_save_ifs ;; esac -else case e in #( - e) enable_shared=yes ;; -esac +else $as_nop + enable_shared=yes fi @@ -8869,9 +8519,8 @@ IFS=$lt_save_ifs ;; esac -else case e in #( - e) enable_static=yes ;; -esac +else $as_nop + enable_static=yes fi @@ -8882,52 +8531,28 @@ - # Check whether --enable-pic was given. -if test ${enable_pic+y} -then : - enableval=$enable_pic; lt_p=${PACKAGE-default} - case $enableval in - yes|no) pic_mode=$enableval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else case e in #( - e) # Check whether --with-pic was given. + +# Check whether --with-pic was given. if test ${with_pic+y} then : withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else case e in #( - e) pic_mode=default ;; -esac -fi - - ;; -esac + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else $as_nop + pic_mode=default fi @@ -8957,9 +8582,8 @@ IFS=$lt_save_ifs ;; esac -else case e in #( - e) enable_fast_install=yes ;; -esac +else $as_nop + enable_fast_install=yes fi @@ -8974,46 +8598,29 @@ power*-*-aix[5-9]*,yes) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 printf %s "checking which variant of shared library versioning to provide... " >&6; } - # Check whether --enable-aix-soname was given. -if test ${enable_aix_soname+y} -then : - enableval=$enable_aix_soname; case $enableval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --enable-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$enable_aix_soname -else case e in #( - e) # Check whether --with-aix-soname was given. + +# Check whether --with-aix-soname was given. if test ${with_aix_soname+y} then : withval=$with_aix_soname; case $withval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname -else case e in #( - e) if test ${lt_cv_with_aix_soname+y} + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else $as_nop + if test ${lt_cv_with_aix_soname+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_with_aix_soname=aix ;; -esac -fi - ;; -esac +else $as_nop + lt_cv_with_aix_soname=aix fi - enable_aix_soname=$lt_cv_with_aix_soname ;; -esac + with_aix_soname=$lt_cv_with_aix_soname fi - with_aix_soname=$enable_aix_soname { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 printf "%s\n" "$with_aix_soname" >&6; } if test aix != "$with_aix_soname"; then @@ -9102,8 +8709,8 @@ if test ${lt_cv_objdir+y} then : printf %s "(cached) " >&6 -else case e in #( - e) rm -f .libs 2>/dev/null +else $as_nop + rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs @@ -9111,8 +8718,7 @@ # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi -rmdir .libs 2>/dev/null ;; -esac +rmdir .libs 2>/dev/null fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 printf "%s\n" "$lt_cv_objdir" >&6; } @@ -9143,8 +8749,8 @@ ofile=libtool can_build_shared=yes -# All known linkers require a '.a' archive for static linking (except MSVC and -# ICC, which need '.lib'). +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld @@ -9173,8 +8779,8 @@ if test ${lt_cv_path_MAGIC_CMD+y} then : printf %s "(cached) " >&6 -else case e in #( - e) case $MAGIC_CMD in +else $as_nop + case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; @@ -9217,7 +8823,6 @@ IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; -esac ;; esac fi @@ -9241,8 +8846,8 @@ if test ${lt_cv_path_MAGIC_CMD+y} then : printf %s "(cached) " >&6 -else case e in #( - e) case $MAGIC_CMD in +else $as_nop + case $MAGIC_CMD in [\\/*] | ?:[\\/]*) lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. ;; @@ -9285,7 +8890,6 @@ IFS=$lt_save_ifs MAGIC_CMD=$lt_save_MAGIC_CMD ;; -esac ;; esac fi @@ -9329,7 +8933,7 @@ lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests -lt_simple_link_test_code='int main(void){return(0);}' +lt_simple_link_test_code='int main(){return(0);}' @@ -9381,8 +8985,8 @@ if test ${lt_cv_prog_compiler_rtti_exceptions+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_rtti_exceptions=no +else $as_nop + lt_cv_prog_compiler_rtti_exceptions=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment @@ -9410,8 +9014,7 @@ fi fi $RM conftest* - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 printf "%s\n" "$lt_cv_prog_compiler_rtti_exceptions" >&6; } @@ -9467,7 +9070,7 @@ # PIC is the default for these OSes. ;; - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style @@ -9570,7 +9173,7 @@ esac ;; - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' @@ -9611,8 +9214,8 @@ lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; - *flang* | ftn | f18* | f95*) - # Flang compiler. + # flang / f18. f95 an alias for gfortran or flang on Debian + flang* | f18* | f95*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-fPIC' lt_prog_compiler_static='-static' @@ -9661,7 +9264,7 @@ lt_prog_compiler_static='-qstaticlink' ;; *) - case `$CC -V 2>&1 | $SED 5q` in + case `$CC -V 2>&1 | sed 5q` in *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' @@ -9699,12 +9302,6 @@ lt_prog_compiler_static='-Bstatic' ;; - *-mlibc) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *nto* | *qnx*) # QNX uses GNU C++, but need to define -shared option too, otherwise # it will coredump. @@ -9721,9 +9318,6 @@ lt_prog_compiler_static='-non_shared' ;; - serenity*) - ;; - solaris*) lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' @@ -9791,9 +9385,8 @@ if test ${lt_cv_prog_compiler_pic+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ;; -esac +else $as_nop + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 printf "%s\n" "$lt_cv_prog_compiler_pic" >&6; } @@ -9808,8 +9401,8 @@ if test ${lt_cv_prog_compiler_pic_works+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic_works=no +else $as_nop + lt_cv_prog_compiler_pic_works=no ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment @@ -9837,8 +9430,7 @@ fi fi $RM conftest* - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 printf "%s\n" "$lt_cv_prog_compiler_pic_works" >&6; } @@ -9874,8 +9466,8 @@ if test ${lt_cv_prog_compiler_static_works+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_static_works=no +else $as_nop + lt_cv_prog_compiler_static_works=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS $lt_tmp_static_flag" echo "$lt_simple_link_test_code" > conftest.$ac_ext @@ -9896,8 +9488,7 @@ fi $RM -r conftest* LDFLAGS=$save_LDFLAGS - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 printf "%s\n" "$lt_cv_prog_compiler_static_works" >&6; } @@ -9919,8 +9510,8 @@ if test ${lt_cv_prog_compiler_c_o+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_c_o=no +else $as_nop + lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest @@ -9960,8 +9551,7 @@ cd .. $RM -r conftest $RM conftest* - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 printf "%s\n" "$lt_cv_prog_compiler_c_o" >&6; } @@ -9976,8 +9566,8 @@ if test ${lt_cv_prog_compiler_c_o+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_c_o=no +else $as_nop + lt_cv_prog_compiler_c_o=no $RM -r conftest 2>/dev/null mkdir conftest cd conftest @@ -10017,8 +9607,7 @@ cd .. $RM -r conftest $RM conftest* - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 printf "%s\n" "$lt_cv_prog_compiler_c_o" >&6; } @@ -10097,18 +9686,24 @@ extract_expsyms_cmds= case $host_os in - cygwin* | mingw* | windows* | pw32* | cegcc*) - # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using - # Microsoft Visual C++ or Intel C++ Compiler. + # Microsoft Visual C++. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC) + # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; + openbsd* | bitrig*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + link_all_deplibs=no + ;; esac ld_shlibs=yes @@ -10155,7 +9750,7 @@ whole_archive_flag_spec= fi supports_anon_versioning=no - case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in + case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... @@ -10209,7 +9804,7 @@ fi ;; - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' @@ -10219,7 +9814,6 @@ enable_shared_with_static_runtimes=yes export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - file_list_spec='@' if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' @@ -10239,7 +9833,7 @@ haiku*) archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - link_all_deplibs=no + link_all_deplibs=yes ;; os2*) @@ -10266,9 +9860,8 @@ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes - file_list_spec='@' ;; interix[3-9]*) @@ -10283,7 +9876,7 @@ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) @@ -10326,7 +9919,7 @@ compiler_needs_object=yes ;; esac - case `$CC -V 2>&1 | $SED 5q` in + case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' compiler_needs_object=yes @@ -10338,14 +9931,13 @@ if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' fi case $cc_basename in tcc*) - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' export_dynamic_flag_spec='-rdynamic' ;; xlf* | bgf* | bgxlf* | mpixlf*) @@ -10355,7 +9947,7 @@ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test yes = "$supports_anon_versioning"; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ echo "local: *; };" >> $output_objdir/$libname.ver~ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' fi @@ -10366,11 +9958,6 @@ fi ;; - *-mlibc) - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' @@ -10492,7 +10079,7 @@ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no @@ -10617,8 +10204,8 @@ if test ${lt_cv_aix_libpath_+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -10650,8 +10237,7 @@ if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=/usr/lib:/lib fi - ;; -esac + fi aix_libpath=$lt_cv_aix_libpath_ @@ -10673,8 +10259,8 @@ if test ${lt_cv_aix_libpath_+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -10706,8 +10292,7 @@ if test -z "$lt_cv_aix_libpath_"; then lt_cv_aix_libpath_=/usr/lib:/lib fi - ;; -esac + fi aix_libpath=$lt_cv_aix_libpath_ @@ -10763,14 +10348,14 @@ export_dynamic_flag_spec=-rdynamic ;; - cygwin* | mingw* | windows* | pw32* | cegcc*) + cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using - # Microsoft Visual C++ or Intel C++ Compiler. + # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in - cl* | icl*) - # Native MSVC or ICC + cl*) + # Native MSVC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes @@ -10780,14 +10365,14 @@ # Tell ltmain to make .dll files, not .so files. shrext_cmds=.dll # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -Fe$output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then cp "$export_symbols" "$output_objdir/$soname.def"; echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; else $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; fi~ - $CC -Fe$tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ linknames=' # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' @@ -10811,7 +10396,7 @@ fi' ;; *) - # Assume MSVC and ICC wrapper + # Assume MSVC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. @@ -10852,8 +10437,8 @@ output_verbose_link_cmd=func_echo_all archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - archive_expsym_cmds="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - module_expsym_cmds="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" else ld_shlibs=no @@ -10887,7 +10472,7 @@ ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly* | midnightbsd*) + freebsd* | dragonfly*) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes @@ -10958,8 +10543,8 @@ if test ${lt_cv_prog_compiler__b+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler__b=no +else $as_nop + lt_cv_prog_compiler__b=no save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -b" echo "$lt_simple_link_test_code" > conftest.$ac_ext @@ -10980,8 +10565,7 @@ fi $RM -r conftest* LDFLAGS=$save_LDFLAGS - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 printf "%s\n" "$lt_cv_prog_compiler__b" >&6; } @@ -11029,8 +10613,8 @@ if test ${lt_cv_irix_exported_symbol+y} then : printf %s "(cached) " >&6 -else case e in #( - e) save_LDFLAGS=$LDFLAGS +else $as_nop + save_LDFLAGS=$LDFLAGS LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -11039,20 +10623,19 @@ if ac_fn_c_try_link "$LINENO" then : lt_cv_irix_exported_symbol=yes -else case e in #( - e) lt_cv_irix_exported_symbol=no ;; -esac +else $as_nop + lt_cv_irix_exported_symbol=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS ;; -esac + LDFLAGS=$save_LDFLAGS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 printf "%s\n" "$lt_cv_irix_exported_symbol" >&6; } if test yes = "$lt_cv_irix_exported_symbol"; then archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' fi + link_all_deplibs=no else archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' @@ -11070,14 +10653,10 @@ # Fabrice Bellard et al's Tiny C Compiler ld_shlibs=yes archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' ;; esac ;; - *-mlibc) - ;; - netbsd* | netbsdelf*-gnu) if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out @@ -11100,7 +10679,7 @@ *nto* | *qnx*) ;; - openbsd*) + openbsd* | bitrig*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no @@ -11143,9 +10722,8 @@ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ emximp -o $lib $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes - file_list_spec='@' ;; osf3*) @@ -11179,9 +10757,6 @@ hardcode_libdir_separator=: ;; - serenity*) - ;; - solaris*) no_undefined_flag=' -z defs' if test yes = "$GCC"; then @@ -11379,8 +10954,8 @@ if test ${lt_cv_archive_cmds_need_lc+y} then : printf %s "(cached) " >&6 -else case e in #( - e) $RM conftest* +else $as_nop + $RM conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 @@ -11416,8 +10991,7 @@ cat conftest.err 1>&5 fi $RM conftest* - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 printf "%s\n" "$lt_cv_archive_cmds_need_lc" >&6; } @@ -11588,7 +11162,7 @@ *) lt_awk_arg='/^libraries:/' ;; esac case $host_os in - mingw* | windows* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; *) lt_sed_strip_eq='s|=/|/|g' ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` @@ -11646,7 +11220,7 @@ # AWK program above erroneously prepends '/' to C:/dos/paths # for these hosts. case $host_os in - mingw* | windows* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ $SED 's|/\([A-Za-z]:\)|\1|g'` ;; esac sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` @@ -11720,7 +11294,7 @@ # Unfortunately, runtime linking may impact performance, so we do # not want this to be the default eventually. Also, we use the # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --enable-aix-soname=svr4 only. + # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. # To allow for filename-based versioning support, we need to create # libNAME.so.V as an archive file, containing: # *) an Import File, referring to the versioned filename of the @@ -11814,7 +11388,7 @@ # libtool to hard-code these into programs ;; -cygwin* | mingw* | windows* | pw32* | cegcc*) +cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=.dll need_version=no @@ -11825,29 +11399,15 @@ # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds - # If user builds GCC with multilib enabled, - # it should just install on $(libdir) - # not on $(libdir)/../bin or 32 bits dlls would override 64 bit ones. - if test xyes = x"$multilib"; then - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - $install_prog $dir/$dlname $destdir/$dlname~ - chmod a+x $destdir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib $destdir/$dlname'\'' || exit \$?; - fi' - else - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - fi + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $RM \$dlpath' @@ -11856,30 +11416,30 @@ case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; - mingw* | windows* | cegcc*) + mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' ;; esac dynamic_linker='Win32 ld.exe' ;; - *,cl* | *,icl*) - # Native MSVC or ICC + *,cl*) + # Native MSVC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' case $build_os in - mingw* | windows*) + mingw*) sys_lib_search_path_spec= lt_save_ifs=$IFS IFS=';' @@ -11892,7 +11452,7 @@ done IFS=$lt_save_ifs # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` ;; cygwin*) # Convert to unix form, then to dos form, then back to unix form @@ -11929,7 +11489,7 @@ ;; *) - # Assume MSVC and ICC wrapper + # Assume MSVC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; @@ -11962,7 +11522,7 @@ shlibpath_var=LD_LIBRARY_PATH ;; -freebsd* | dragonfly* | midnightbsd*) +freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then @@ -11986,28 +11546,7 @@ need_version=yes ;; esac - case $host_cpu in - powerpc64) - # On FreeBSD bi-arch platforms, a different variable is used for 32-bit - # binaries. See <https://man.freebsd.org/cgi/man.cgi?query=ld.so>. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int test_pointer_size[sizeof (void *) - 5]; - -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : shlibpath_var=LD_LIBRARY_PATH -else case e in #( - e) shlibpath_var=LD_32_LIBRARY_PATH ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ;; - *) - shlibpath_var=LD_LIBRARY_PATH - ;; - esac case $host_os in freebsd2.*) shlibpath_overrides_runpath=yes @@ -12037,9 +11576,8 @@ soname_spec='$libname$release$shared_ext$major' shlibpath_var=LIBRARY_PATH shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/boot/system/non-packaged/develop/lib /boot/system/develop/lib' - sys_lib_dlsearch_path_spec='/boot/home/config/non-packaged/lib /boot/home/config/lib /boot/system/non-packaged/lib /boot/system/lib' - hardcode_into_libs=no + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) @@ -12149,7 +11687,7 @@ version_type=none # Android doesn't support versioned libraries. need_lib_prefix=no need_version=no - library_names_spec='$libname$release$shared_ext $libname$shared_ext' + library_names_spec='$libname$release$shared_ext' soname_spec='$libname$release$shared_ext' finish_cmds= shlibpath_var=LD_LIBRARY_PATH @@ -12161,9 +11699,8 @@ hardcode_into_libs=yes dynamic_linker='Android linker' - # -rpath works at least for libraries that are not overridden by - # libraries installed in system locations. - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + # Don't embed -rpath directories since the linker doesn't support them. + hardcode_libdir_flag_spec='-L$libdir' ;; # This must be glibc/ELF. @@ -12181,8 +11718,8 @@ if test ${lt_cv_shlibpath_overrides_runpath+y} then : printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_shlibpath_overrides_runpath=no +else $as_nop + lt_cv_shlibpath_overrides_runpath=no save_LDFLAGS=$LDFLAGS save_libdir=$libdir eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ @@ -12209,8 +11746,7 @@ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$save_LDFLAGS libdir=$save_libdir - ;; -esac + fi shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath @@ -12220,7 +11756,7 @@ # before this can be enabled. hardcode_into_libs=yes - # Ideally, we could use ldconfig to report *all* directories which are + # Ideally, we could use ldconfig to report *all* directores which are # searched for libraries, however this is still not possible. Aside from not # being certain /sbin/ldconfig is available, command # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, @@ -12244,8 +11780,8 @@ version_type=linux need_lib_prefix=no need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes @@ -12270,18 +11806,6 @@ hardcode_into_libs=yes ;; -*-mlibc) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='mlibc ld.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - newsos6) version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' @@ -12301,7 +11825,7 @@ dynamic_linker='ldqnx.so' ;; -openbsd*) +openbsd* | bitrig*) version_type=sunos sys_lib_dlsearch_path_spec=/usr/lib need_lib_prefix=no @@ -12361,17 +11885,6 @@ dynamic_linker=no ;; -serenity*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - dynamic_linker='SerenityOS LibELF' - ;; - solaris*) version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no @@ -12469,496 +11982,6 @@ shlibpath_var=LD_LIBRARY_PATH ;; -emscripten*) - version_type=none - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - dynamic_linker="Emscripten linker" - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test yes = "$GCC"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - lt_prog_compiler_pic='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - *flang* | ftn | f18* | f95*) - # Flang compiler. - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | $SED 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *-mlibc) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - serenity*) - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -printf %s "checking for $compiler option to produce PIC... " >&6; } -if test ${lt_cv_prog_compiler_pic+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -printf "%s\n" "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -printf %s "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test ${lt_cv_prog_compiler_pic_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -printf "%s\n" "$lt_cv_prog_compiler_pic_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_pic_works"; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -printf %s "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test ${lt_cv_prog_compiler_static_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_static_works=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -printf "%s\n" "$lt_cv_prog_compiler_static_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_static_works"; then - : -else - lt_prog_compiler_static= -fi - - - -='-fPIC' - archive_cmds='$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib' - archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib -s EXPORTED_FUNCTIONS=@$output_objdir/$soname.expsym' - archive_cmds_need_lc=no - no_undefined_flag= - ;; - *) dynamic_linker=no ;; @@ -13143,7 +12166,7 @@ lt_cv_dlopen_self=yes ;; - mingw* | windows* | pw32* | cegcc*) + mingw* | pw32* | cegcc*) lt_cv_dlopen=LoadLibrary lt_cv_dlopen_libs= ;; @@ -13160,22 +12183,16 @@ if test ${ac_cv_lib_dl_dlopen+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS +else $as_nop + ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (void); + builtin and then its argument prototype would still apply. */ +char dlopen (); int main (void) { @@ -13187,27 +12204,24 @@ if ac_fn_c_try_link "$LINENO" then : ac_cv_lib_dl_dlopen=yes -else case e in #( - e) ac_cv_lib_dl_dlopen=no ;; -esac +else $as_nop + ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac +LIBS=$ac_check_lib_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 printf "%s\n" "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else case e in #( - e) +else $as_nop + lt_cv_dlopen=dyld lt_cv_dlopen_libs= lt_cv_dlopen_self=yes - ;; -esac + fi ;; @@ -13225,28 +12239,22 @@ if test "x$ac_cv_func_shl_load" = xyes then : lt_cv_dlopen=shl_load -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 printf %s "checking for shl_load in -ldld... " >&6; } if test ${ac_cv_lib_dld_shl_load+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS +else $as_nop + ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (void); + builtin and then its argument prototype would still apply. */ +char shl_load (); int main (void) { @@ -13258,47 +12266,39 @@ if ac_fn_c_try_link "$LINENO" then : ac_cv_lib_dld_shl_load=yes -else case e in #( - e) ac_cv_lib_dld_shl_load=no ;; -esac +else $as_nop + ac_cv_lib_dld_shl_load=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac +LIBS=$ac_check_lib_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 printf "%s\n" "$ac_cv_lib_dld_shl_load" >&6; } if test "x$ac_cv_lib_dld_shl_load" = xyes then : lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld -else case e in #( - e) ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +else $as_nop + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" if test "x$ac_cv_func_dlopen" = xyes then : lt_cv_dlopen=dlopen -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 printf %s "checking for dlopen in -ldl... " >&6; } if test ${ac_cv_lib_dl_dlopen+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS +else $as_nop + ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (void); + builtin and then its argument prototype would still apply. */ +char dlopen (); int main (void) { @@ -13310,42 +12310,34 @@ if ac_fn_c_try_link "$LINENO" then : ac_cv_lib_dl_dlopen=yes -else case e in #( - e) ac_cv_lib_dl_dlopen=no ;; -esac +else $as_nop + ac_cv_lib_dl_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac +LIBS=$ac_check_lib_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 printf "%s\n" "$ac_cv_lib_dl_dlopen" >&6; } if test "x$ac_cv_lib_dl_dlopen" = xyes then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 printf %s "checking for dlopen in -lsvld... " >&6; } if test ${ac_cv_lib_svld_dlopen+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS +else $as_nop + ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (void); + builtin and then its argument prototype would still apply. */ +char dlopen (); int main (void) { @@ -13357,42 +12349,34 @@ if ac_fn_c_try_link "$LINENO" then : ac_cv_lib_svld_dlopen=yes -else case e in #( - e) ac_cv_lib_svld_dlopen=no ;; -esac +else $as_nop + ac_cv_lib_svld_dlopen=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac +LIBS=$ac_check_lib_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 printf "%s\n" "$ac_cv_lib_svld_dlopen" >&6; } if test "x$ac_cv_lib_svld_dlopen" = xyes then : lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 printf %s "checking for dld_link in -ldld... " >&6; } if test ${ac_cv_lib_dld_dld_link+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS +else $as_nop + ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (void); + builtin and then its argument prototype would still apply. */ +char dld_link (); int main (void) { @@ -13404,14 +12388,12 @@ if ac_fn_c_try_link "$LINENO" then : ac_cv_lib_dld_dld_link=yes -else case e in #( - e) ac_cv_lib_dld_dld_link=no ;; -esac +else $as_nop + ac_cv_lib_dld_dld_link=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac +LIBS=$ac_check_lib_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 printf "%s\n" "$ac_cv_lib_dld_dld_link" >&6; } @@ -13420,24 +12402,19 @@ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld fi - ;; -esac + fi - ;; -esac + fi - ;; -esac + fi - ;; -esac + fi - ;; -esac + fi ;; @@ -13465,8 +12442,8 @@ if test ${lt_cv_dlopen_self+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test yes = "$cross_compiling"; then : +else $as_nop + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -13516,11 +12493,11 @@ /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord (void) __attribute__((visibility("default"))); +int fnord () __attribute__((visibility("default"))); #endif -int fnord (void) { return 42; } -int main (void) +int fnord () { return 42; } +int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; @@ -13560,8 +12537,7 @@ fi rm -fr conftest* - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 printf "%s\n" "$lt_cv_dlopen_self" >&6; } @@ -13573,8 +12549,8 @@ if test ${lt_cv_dlopen_self_static+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test yes = "$cross_compiling"; then : +else $as_nop + if test yes = "$cross_compiling"; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 @@ -13624,11 +12600,11 @@ /* When -fvisibility=hidden is used, assume the code has been annotated correspondingly for the symbols needed. */ #if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord (void) __attribute__((visibility("default"))); +int fnord () __attribute__((visibility("default"))); #endif -int fnord (void) { return 42; } -int main (void) +int fnord () { return 42; } +int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; @@ -13668,8 +12644,7 @@ fi rm -fr conftest* - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 printf "%s\n" "$lt_cv_dlopen_self_static" >&6; } @@ -13712,41 +12687,30 @@ old_striplib= { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 printf %s "checking whether stripping libraries is possible... " >&6; } -if test -z "$STRIP"; then - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } -else - if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - old_striplib="$STRIP --strip-debug" - striplib="$STRIP --strip-unneeded" - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 printf "%s\n" "yes" >&6; } - else - case $host_os in - darwin*) - # FIXME - insert some real tests, host_os isn't really good enough +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP"; then striplib="$STRIP -x" old_striplib="$STRIP -S" { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 printf "%s\n" "yes" >&6; } - ;; - freebsd*) - if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then - old_striplib="$STRIP --strip-debug" - striplib="$STRIP --strip-unneeded" - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf "%s\n" "yes" >&6; } - else - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf "%s\n" "no" >&6; } - fi - ;; - *) + else { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } - ;; - esac - fi + fi + ;; + *) + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf "%s\n" "no" >&6; } + ;; + esac fi @@ -13843,9 +12807,8 @@ if test ${enable_maintainer_mode+y} then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else case e in #( - e) USE_MAINTAINER_MODE=no ;; -esac +else $as_nop + USE_MAINTAINER_MODE=no fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 @@ -13881,8 +12844,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -13904,8 +12867,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -13927,8 +12889,8 @@ if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then +else $as_nop + if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -13950,8 +12912,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then @@ -13986,8 +12947,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -14009,8 +12970,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -14032,8 +12992,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no @@ -14072,8 +13032,7 @@ ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@" fi fi -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -14097,8 +13056,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -14120,8 +13079,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -14147,8 +13105,8 @@ if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then +else $as_nop + if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -14170,8 +13128,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then @@ -14209,8 +13166,8 @@ if test ${ac_cv_prog_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then +else $as_nop + if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -14232,8 +13189,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then @@ -14255,8 +13211,8 @@ if test ${ac_cv_prog_ac_ct_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then +else $as_nop + if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -14278,8 +13234,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then @@ -14308,10 +13263,10 @@ fi -test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +test -z "$CC" && { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH -See 'config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 @@ -14343,8 +13298,8 @@ if test ${ac_cv_c_compiler_gnu+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -14361,14 +13316,12 @@ if ac_fn_c_try_compile "$LINENO" then : ac_compiler_gnu=yes -else case e in #( - e) ac_compiler_gnu=no ;; -esac +else $as_nop + ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 printf "%s\n" "$ac_cv_c_compiler_gnu" >&6; } @@ -14386,8 +13339,8 @@ if test ${ac_cv_prog_cc_g+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_save_c_werror_flag=$ac_c_werror_flag +else $as_nop + ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" @@ -14405,8 +13358,8 @@ if ac_fn_c_try_compile "$LINENO" then : ac_cv_prog_cc_g=yes -else case e in #( - e) CFLAGS="" +else $as_nop + CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -14421,8 +13374,8 @@ if ac_fn_c_try_compile "$LINENO" then : -else case e in #( - e) ac_c_werror_flag=$ac_save_c_werror_flag +else $as_nop + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -14439,15 +13392,12 @@ then : ac_cv_prog_cc_g=yes fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag ;; -esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 printf "%s\n" "$ac_cv_prog_cc_g" >&6; } @@ -14474,8 +13424,8 @@ if test ${ac_cv_prog_cc_c11+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c11=no +else $as_nop + ac_cv_prog_cc_c11=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -14492,28 +13442,25 @@ test "x$ac_cv_prog_cc_c11" != "xno" && break done rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac +CC=$ac_save_CC fi if test "x$ac_cv_prog_cc_c11" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c11" = x +else $as_nop + if test "x$ac_cv_prog_cc_c11" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 printf "%s\n" "$ac_cv_prog_cc_c11" >&6; } - CC="$CC $ac_cv_prog_cc_c11" ;; -esac + CC="$CC $ac_cv_prog_cc_c11" fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11 - ac_prog_cc_stdc=c11 ;; -esac + ac_prog_cc_stdc=c11 fi fi if test x$ac_prog_cc_stdc = xno @@ -14523,8 +13470,8 @@ if test ${ac_cv_prog_cc_c99+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c99=no +else $as_nop + ac_cv_prog_cc_c99=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -14541,28 +13488,25 @@ test "x$ac_cv_prog_cc_c99" != "xno" && break done rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac +CC=$ac_save_CC fi if test "x$ac_cv_prog_cc_c99" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c99" = x +else $as_nop + if test "x$ac_cv_prog_cc_c99" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 printf "%s\n" "$ac_cv_prog_cc_c99" >&6; } - CC="$CC $ac_cv_prog_cc_c99" ;; -esac + CC="$CC $ac_cv_prog_cc_c99" fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 - ac_prog_cc_stdc=c99 ;; -esac + ac_prog_cc_stdc=c99 fi fi if test x$ac_prog_cc_stdc = xno @@ -14572,8 +13516,8 @@ if test ${ac_cv_prog_cc_c89+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c89=no +else $as_nop + ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -14590,28 +13534,25 @@ test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac +CC=$ac_save_CC fi if test "x$ac_cv_prog_cc_c89" = xno then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 printf "%s\n" "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c89" = x +else $as_nop + if test "x$ac_cv_prog_cc_c89" = x then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 printf "%s\n" "none needed" >&6; } -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 printf "%s\n" "$ac_cv_prog_cc_c89" >&6; } - CC="$CC $ac_cv_prog_cc_c89" ;; -esac + CC="$CC $ac_cv_prog_cc_c89" fi ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 - ac_prog_cc_stdc=c89 ;; -esac + ac_prog_cc_stdc=c89 fi fi @@ -14632,8 +13573,8 @@ if test ${am_cv_prog_cc_c_o+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -14663,8 +13604,7 @@ fi done rm -f core conftest* - unset am_i ;; -esac + unset am_i fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 printf "%s\n" "$am_cv_prog_cc_c_o" >&6; } @@ -14690,8 +13630,8 @@ if test ${am_cv_CC_dependencies_compiler_type+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then +else $as_nop + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up @@ -14778,7 +13718,7 @@ # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thus: + # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported @@ -14795,8 +13735,7 @@ else am_cv_CC_dependencies_compiler_type=none fi - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 printf "%s\n" "$am_cv_CC_dependencies_compiler_type" >&6; } @@ -14852,21 +13791,15 @@ if test ${ac_cv_search_floor+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS +else $as_nop + ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char floor (void); + builtin and then its argument prototype would still apply. */ +char floor (); int main (void) { @@ -14897,13 +13830,11 @@ if test ${ac_cv_search_floor+y} then : -else case e in #( - e) ac_cv_search_floor=no ;; -esac +else $as_nop + ac_cv_search_floor=no fi rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac +LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_floor" >&5 printf "%s\n" "$ac_cv_search_floor" >&6; } @@ -14912,12 +13843,11 @@ then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" -else case e in #( - e) +else $as_nop + echo "floor()" exit 1 - ;; -esac + fi @@ -14927,21 +13857,15 @@ if test ${ac_cv_search_socket+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS +else $as_nop + ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char socket (void); + builtin and then its argument prototype would still apply. */ +char socket (); int main (void) { @@ -14972,13 +13896,11 @@ if test ${ac_cv_search_socket+y} then : -else case e in #( - e) ac_cv_search_socket=no ;; -esac +else $as_nop + ac_cv_search_socket=no fi rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac +LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_socket" >&5 printf "%s\n" "$ac_cv_search_socket" >&6; } @@ -14987,12 +13909,11 @@ then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" -else case e in #( - e) +else $as_nop + echo "socket()" exit 1 - ;; -esac + fi @@ -15002,21 +13923,15 @@ if test ${ac_cv_search_inet_ntop+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS +else $as_nop + ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char inet_ntop (void); + builtin and then its argument prototype would still apply. */ +char inet_ntop (); int main (void) { @@ -15047,13 +13962,11 @@ if test ${ac_cv_search_inet_ntop+y} then : -else case e in #( - e) ac_cv_search_inet_ntop=no ;; -esac +else $as_nop + ac_cv_search_inet_ntop=no fi rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac +LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_inet_ntop" >&5 printf "%s\n" "$ac_cv_search_inet_ntop" >&6; } @@ -15062,12 +13975,11 @@ then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" -else case e in #( - e) +else $as_nop + echo "inet_ntop()" exit 1 - ;; -esac + fi @@ -15077,8 +13989,8 @@ if test ${ac_cv_c_const+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -15142,12 +14054,10 @@ if ac_fn_c_try_compile "$LINENO" then : ac_cv_c_const=yes -else case e in #( - e) ac_cv_c_const=no ;; -esac +else $as_nop + ac_cv_c_const=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 printf "%s\n" "$ac_cv_c_const" >&6; } @@ -15173,8 +14083,8 @@ if test ${ac_cv_prog_CPP+y} then : printf %s "(cached) " >&6 -else case e in #( - e) # Double quotes because $CC needs to be expanded +else $as_nop + # Double quotes because $CC needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" cpp /lib/cpp do ac_preproc_ok=false @@ -15192,10 +14102,9 @@ if ac_fn_c_try_cpp "$LINENO" then : -else case e in #( - e) # Broken: fails on valid input. -continue ;; -esac +else $as_nop + # Broken: fails on valid input. +continue fi rm -f conftest.err conftest.i conftest.$ac_ext @@ -15209,16 +14118,15 @@ then : # Broken: success on invalid input. continue -else case e in #( - e) # Passes both tests. +else $as_nop + # Passes both tests. ac_preproc_ok=: -break ;; -esac +break fi rm -f conftest.err conftest.i conftest.$ac_ext done -# Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok then : @@ -15227,8 +14135,7 @@ done ac_cv_prog_CPP=$CPP - ;; -esac + fi CPP=$ac_cv_prog_CPP else @@ -15251,10 +14158,9 @@ if ac_fn_c_try_cpp "$LINENO" then : -else case e in #( - e) # Broken: fails on valid input. -continue ;; -esac +else $as_nop + # Broken: fails on valid input. +continue fi rm -f conftest.err conftest.i conftest.$ac_ext @@ -15268,26 +14174,24 @@ then : # Broken: success on invalid input. continue -else case e in #( - e) # Passes both tests. +else $as_nop + # Passes both tests. ac_preproc_ok=: -break ;; -esac +break fi rm -f conftest.err conftest.i conftest.$ac_ext done -# Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok then : -else case e in #( - e) { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} +else $as_nop + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See 'config.log' for more details" "$LINENO" 5; } ;; -esac +See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c @@ -15297,140 +14201,6 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking for egrep -e" >&5 -printf %s "checking for egrep -e... " >&6; } -if test ${ac_cv_path_EGREP_TRADITIONAL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$EGREP_TRADITIONAL"; then - ac_path_EGREP_TRADITIONAL_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in grep ggrep - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue -# Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. - # Check for GNU $ac_path_EGREP_TRADITIONAL -case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( -*GNU*) - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf "%s\n" 'EGREP_TRADITIONAL' >> "conftest.nl" - "$ac_path_EGREP_TRADITIONAL" -E 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" - ac_path_EGREP_TRADITIONAL_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_TRADITIONAL_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then - : - fi -else - ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL -fi - - if test "$ac_cv_path_EGREP_TRADITIONAL" -then : - ac_cv_path_EGREP_TRADITIONAL="$ac_cv_path_EGREP_TRADITIONAL -E" -else case e in #( - e) if test -z "$EGREP_TRADITIONAL"; then - ac_path_EGREP_TRADITIONAL_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in egrep - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue -# Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. - # Check for GNU $ac_path_EGREP_TRADITIONAL -case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( -*GNU*) - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf "%s\n" 'EGREP_TRADITIONAL' >> "conftest.nl" - "$ac_path_EGREP_TRADITIONAL" 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" - ac_path_EGREP_TRADITIONAL_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_TRADITIONAL_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL -fi - ;; -esac -fi ;; -esac -fi -{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP_TRADITIONAL" >&5 -printf "%s\n" "$ac_cv_path_EGREP_TRADITIONAL" >&6; } - EGREP_TRADITIONAL=$ac_cv_path_EGREP_TRADITIONAL - @@ -15471,14 +14241,8 @@ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_join (void); + builtin and then its argument prototype would still apply. */ +char pthread_join (); int main (void) { @@ -15572,7 +14336,7 @@ _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP_TRADITIONAL "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1 + $EGREP "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1 then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5 printf "%s\n" "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;} @@ -15602,8 +14366,8 @@ if test ${ax_cv_PTHREAD_CLANG+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_CLANG=no +else $as_nop + ax_cv_PTHREAD_CLANG=no # Note that Autoconf sets GCC=yes for Clang as well as GCC if test "x$GCC" = "xyes"; then cat confdefs.h - <<_ACEOF >conftest.$ac_ext @@ -15615,15 +14379,14 @@ _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP_TRADITIONAL "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1 + $EGREP "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1 then : ax_cv_PTHREAD_CLANG=yes fi rm -rf conftest* fi - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5 printf "%s\n" "$ax_cv_PTHREAD_CLANG" >&6; } @@ -15673,9 +14436,8 @@ if test "x$ax_pthread_check_macro" = "x--" then : ax_pthread_check_cond=0 -else case e in #( - e) ax_pthread_check_cond="!defined($ax_pthread_check_macro)" ;; -esac +else $as_nop + ax_pthread_check_cond="!defined($ax_pthread_check_macro)" fi @@ -15709,8 +14471,8 @@ if test ${ac_cv_prog_ax_pthread_config+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ax_pthread_config"; then +else $as_nop + if test -n "$ax_pthread_config"; then ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -15733,8 +14495,7 @@ IFS=$as_save_IFS test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no" -fi ;; -esac +fi fi ax_pthread_config=$ac_cv_prog_ax_pthread_config if test -n "$ax_pthread_config"; then @@ -15867,8 +14628,8 @@ if test ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown +else $as_nop + ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown # Create an alternate version of $ac_link that compiles and # links in two steps (.c -> .o, .o -> exe) instead of one # (.c -> exe), because the warning occurs only in the second @@ -15914,8 +14675,7 @@ ax_pthread_try=no fi ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try" - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5 printf "%s\n" "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; } @@ -15942,8 +14702,8 @@ if test ${ax_cv_PTHREAD_JOINABLE_ATTR+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_JOINABLE_ATTR=unknown +else $as_nop + ax_cv_PTHREAD_JOINABLE_ATTR=unknown for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -15963,8 +14723,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext done - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5 printf "%s\n" "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; } @@ -15984,15 +14743,14 @@ if test ${ax_cv_PTHREAD_SPECIAL_FLAGS+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_SPECIAL_FLAGS=no +else $as_nop + ax_cv_PTHREAD_SPECIAL_FLAGS=no case $host_os in solaris*) ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS" ;; esac - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5 printf "%s\n" "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; } @@ -16008,8 +14766,8 @@ if test ${ax_cv_PTHREAD_PRIO_INHERIT+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <pthread.h> int @@ -16024,14 +14782,12 @@ if ac_fn_c_try_link "$LINENO" then : ax_cv_PTHREAD_PRIO_INHERIT=yes -else case e in #( - e) ax_cv_PTHREAD_PRIO_INHERIT=no ;; -esac +else $as_nop + ax_cv_PTHREAD_PRIO_INHERIT=no fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext - ;; -esac + fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5 printf "%s\n" "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; } @@ -16081,8 +14837,8 @@ if test ${ac_cv_prog_PTHREAD_CC+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$PTHREAD_CC"; then +else $as_nop + if test -n "$PTHREAD_CC"; then ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -16104,8 +14860,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi PTHREAD_CC=$ac_cv_prog_PTHREAD_CC if test -n "$PTHREAD_CC"; then @@ -16132,8 +14887,8 @@ if test ${ac_cv_prog_PTHREAD_CXX+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$PTHREAD_CXX"; then +else $as_nop + if test -n "$PTHREAD_CXX"; then ac_cv_prog_PTHREAD_CXX="$PTHREAD_CXX" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -16155,8 +14910,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi PTHREAD_CXX=$ac_cv_prog_PTHREAD_CXX if test -n "$PTHREAD_CXX"; then @@ -16241,8 +14995,8 @@ then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } -else case e in #( - e) save_LIBS="$LIBS" +else $as_nop + save_LIBS="$LIBS" LIBS="$LIBS -latomic" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ @@ -16259,15 +15013,13 @@ then : { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5 printf "%s\n" "yes" >&6; } -else case e in #( - e) as_fn_error $? "failed to find working configuration with atomics" "$LINENO" 5 - ;; -esac +else $as_nop + as_fn_error $? "failed to find working configuration with atomics" "$LINENO" 5 + fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext - ;; -esac + fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext @@ -16303,12 +15055,11 @@ ;; esac -else case e in #( - e) +else $as_nop + try_sctp=true - ;; -esac + fi @@ -16347,21 +15098,15 @@ if test ${ac_cv_search_sctp_bindx+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS +else $as_nop + ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char sctp_bindx (void); + builtin and then its argument prototype would still apply. */ +char sctp_bindx (); int main (void) { @@ -16392,13 +15137,11 @@ if test ${ac_cv_search_sctp_bindx+y} then : -else case e in #( - e) ac_cv_search_sctp_bindx=no ;; -esac +else $as_nop + ac_cv_search_sctp_bindx=no fi rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac +LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_sctp_bindx" >&5 printf "%s\n" "$ac_cv_search_sctp_bindx" >&6; } @@ -16422,8 +15165,8 @@ if eval test \${$3+y} then : printf %s "(cached) " >&6 -else case e in #( - e) eval "$3=no" +else $as_nop + eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 @@ -16453,14 +15196,12 @@ if ac_fn_c_try_compile "$LINENO" then : -else case e in #( - e) eval "$3=yes" ;; -esac +else $as_nop + eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi eval ac_res=\$$3 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 @@ -16489,22 +15230,20 @@ printf "%s\n" "#define HAVE_ENDIAN_H 1" >>confdefs.h -else case e in #( - e) ac_fn_c_check_header_compile "$LINENO" "sys/endian.h" "ac_cv_header_sys_endian_h" "$ac_includes_default" +else $as_nop + ac_fn_c_check_header_compile "$LINENO" "sys/endian.h" "ac_cv_header_sys_endian_h" "$ac_includes_default" if test "x$ac_cv_header_sys_endian_h" = xyes then : printf "%s\n" "#define HAVE_SYS_ENDIAN_H 1" >>confdefs.h -else case e in #( - e) { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: Couldn't find endian.h or sys/endian.h files: doing compile-time tests." >&5 +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: Couldn't find endian.h or sys/endian.h files: doing compile-time tests." >&5 printf "%s\n" "$as_me: WARNING: Couldn't find endian.h or sys/endian.h files: doing compile-time tests." >&2;} - ;; -esac + fi - ;; -esac + fi @@ -16529,8 +15268,8 @@ ;; esac -else case e in #( - e) +else $as_nop + # if pkg-config is installed and openssl has installed a .pc file, # then use that information and don't search ssldirs if test -n "$ac_tool_prefix"; then @@ -16541,8 +15280,8 @@ if test ${ac_cv_prog_PKG_CONFIG+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$PKG_CONFIG"; then +else $as_nop + if test -n "$PKG_CONFIG"; then ac_cv_prog_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -16564,8 +15303,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi PKG_CONFIG=$ac_cv_prog_PKG_CONFIG if test -n "$PKG_CONFIG"; then @@ -16587,8 +15325,8 @@ if test ${ac_cv_prog_ac_ct_PKG_CONFIG+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_PKG_CONFIG"; then +else $as_nop + if test -n "$ac_ct_PKG_CONFIG"; then ac_cv_prog_ac_ct_PKG_CONFIG="$ac_ct_PKG_CONFIG" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -16610,8 +15348,7 @@ done IFS=$as_save_IFS -fi ;; -esac +fi fi ac_ct_PKG_CONFIG=$ac_cv_prog_ac_ct_PKG_CONFIG if test -n "$ac_ct_PKG_CONFIG"; then @@ -16651,8 +15388,7 @@ ssldirs="/usr/local/ssl /usr/lib/ssl /usr/ssl /usr/pkg /usr/local /usr" fi - ;; -esac + fi @@ -16718,19 +15454,18 @@ have_ssl=true -else case e in #( - e) +else $as_nop + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: no" >&5 printf "%s\n" "no" >&6; } if test "x$with_openssl" != "x"; then - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "--with-openssl was given, but test for OpenSSL failed -See 'config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5; } fi - ;; -esac + fi rm -f core conftest.err conftest.$ac_objext conftest.beam \ conftest$ac_exeext conftest.$ac_ext @@ -16760,8 +15495,8 @@ if test ${iperf3_cv_header_tcp_congestion+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <netinet/tcp.h> int @@ -16775,12 +15510,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_tcp_congestion=yes -else case e in #( - e) iperf3_cv_header_tcp_congestion=no ;; -esac +else $as_nop + iperf3_cv_header_tcp_congestion=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_tcp_congestion" >&5 printf "%s\n" "$iperf3_cv_header_tcp_congestion" >&6; } @@ -16796,8 +15529,8 @@ if test ${iperf3_cv_header_tcp_user_timeout+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <netinet/tcp.h> int @@ -16811,12 +15544,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_tcp_user_timeout=yes -else case e in #( - e) iperf3_cv_header_tcp_user_timeout=no ;; -esac +else $as_nop + iperf3_cv_header_tcp_user_timeout=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_tcp_user_timeout" >&5 printf "%s\n" "$iperf3_cv_header_tcp_user_timeout" >&6; } @@ -16826,6 +15557,40 @@ fi +# Check for TCP_KEEPIDLE sockopt (not clear where supported) +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking TCP_KEEPIDLE socket option" >&5 +printf %s "checking TCP_KEEPIDLE socket option... " >&6; } +if test ${iperf3_cv_header_tcp_keepalive+y} +then : + printf %s "(cached) " >&6 +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <netinet/tcp.h> +int +main (void) +{ +int foo = TCP_KEEPIDLE; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + iperf3_cv_header_tcp_keepalive=yes +else $as_nop + iperf3_cv_header_tcp_keepalive=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +fi +{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_tcp_keepalive" >&5 +printf "%s\n" "$iperf3_cv_header_tcp_keepalive" >&6; } +if test "x$iperf3_cv_header_tcp_keepalive" = "xyes"; then + +printf "%s\n" "#define HAVE_TCP_KEEPALIVE 1" >>confdefs.h + +fi + # Check for IPv6 flowlabel support (believed to be Linux only) # We check for IPV6_FLOWLABEL_MGR in <linux/in6.h> even though we # don't use that file directly (we have our own stripped-down @@ -16835,8 +15600,8 @@ if test ${iperf3_cv_header_flowlabel+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <linux/in6.h> @@ -16851,12 +15616,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_flowlabel=yes -else case e in #( - e) iperf3_cv_header_flowlabel=no ;; -esac +else $as_nop + iperf3_cv_header_flowlabel=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_flowlabel" >&5 printf "%s\n" "$iperf3_cv_header_flowlabel" >&6; } @@ -16874,12 +15637,12 @@ for ac_func in cpuset_setaffinity sched_setaffinity SetProcessAffinityMask do : - as_ac_var=`printf "%s\n" "ac_cv_func_$ac_func" | sed "$as_sed_sh"` + as_ac_var=`printf "%s\n" "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes" then : cat >>confdefs.h <<_ACEOF -#define `printf "%s\n" "HAVE_$ac_func" | sed "$as_sed_cpp"` 1 +#define `printf "%s\n" "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF printf "%s\n" "#define HAVE_CPU_AFFINITY 1" >>confdefs.h @@ -16924,8 +15687,8 @@ if test ${iperf3_cv_header_so_max_pacing_rate+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/socket.h> int @@ -16939,12 +15702,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_so_max_pacing_rate=yes -else case e in #( - e) iperf3_cv_header_so_max_pacing_rate=no ;; -esac +else $as_nop + iperf3_cv_header_so_max_pacing_rate=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_so_max_pacing_rate" >&5 printf "%s\n" "$iperf3_cv_header_so_max_pacing_rate" >&6; } @@ -16960,8 +15721,8 @@ if test ${iperf3_cv_header_so_bindtodevice+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/socket.h> int @@ -16975,12 +15736,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_so_bindtodevice=yes -else case e in #( - e) iperf3_cv_header_so_bindtodevice=no ;; -esac +else $as_nop + iperf3_cv_header_so_bindtodevice=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_so_bindtodevice" >&5 printf "%s\n" "$iperf3_cv_header_so_bindtodevice" >&6; } @@ -16996,8 +15755,8 @@ if test ${iperf3_cv_header_ip_mtu_discover+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <sys/socket.h> @@ -17013,12 +15772,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_ip_mtu_discover=yes -else case e in #( - e) iperf3_cv_header_ip_mtu_discover=no ;; -esac +else $as_nop + iperf3_cv_header_ip_mtu_discover=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_ip_mtu_discover" >&5 printf "%s\n" "$iperf3_cv_header_ip_mtu_discover" >&6; } @@ -17034,8 +15791,8 @@ if test ${iperf3_cv_header_ip_dontfrag+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <sys/socket.h> @@ -17051,12 +15808,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_ip_dontfrag=yes -else case e in #( - e) iperf3_cv_header_ip_dontfrag=no ;; -esac +else $as_nop + iperf3_cv_header_ip_dontfrag=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_ip_dontfrag" >&5 printf "%s\n" "$iperf3_cv_header_ip_dontfrag" >&6; } @@ -17072,8 +15827,8 @@ if test ${iperf3_cv_header_ip_dontfragment+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <sys/socket.h> @@ -17089,12 +15844,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_ip_dontfragment=yes -else case e in #( - e) iperf3_cv_header_ip_dontfragment=no ;; -esac +else $as_nop + iperf3_cv_header_ip_dontfragment=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_ip_dontfragment" >&5 printf "%s\n" "$iperf3_cv_header_ip_dontfragment" >&6; } @@ -17110,13 +15863,12 @@ if test ${iperf3_cv_header_dontfragment+y} then : printf %s "(cached) " >&6 -else case e in #( - e) if test "x$iperf3_cv_header_ip_mtu_discover" = "xyes" -o "x$iperf3_cv_header_ip_dontfrag" = "xyes" -o "x$iperf3_cv_header_ip_dontfragment" = "xyes"; then +else $as_nop + if test "x$iperf3_cv_header_ip_mtu_discover" = "xyes" -o "x$iperf3_cv_header_ip_dontfrag" = "xyes" -o "x$iperf3_cv_header_ip_dontfragment" = "xyes"; then iperf3_cv_header_dontfragment=yes else iperf3_cv_header_dontfragment=no -fi ;; -esac +fi fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_dontfragment" >&5 printf "%s\n" "$iperf3_cv_header_dontfragment" >&6; } @@ -17141,9 +15893,8 @@ if test "x$ac_cv_member_struct_tcp_info_tcpi_snd_wnd" = xyes then : iperf3_cv_header_tcp_info_snd_wnd=yes -else case e in #( - e) iperf3_cv_header_tcp_info_snd_wnd=no ;; -esac +else $as_nop + iperf3_cv_header_tcp_info_snd_wnd=no fi @@ -17159,8 +15910,8 @@ if test ${iperf3_cv_header_ipproto_mptcp+y} then : printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +else $as_nop + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <netinet/in.h> int @@ -17174,12 +15925,10 @@ if ac_fn_c_try_compile "$LINENO" then : iperf3_cv_header_ipproto_mptcp=yes -else case e in #( - e) iperf3_cv_header_ipproto_mptcp=no ;; -esac +else $as_nop + iperf3_cv_header_ipproto_mptcp=no fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $iperf3_cv_header_ipproto_mptcp" >&5 printf "%s\n" "$iperf3_cv_header_ipproto_mptcp" >&6; } @@ -17195,21 +15944,15 @@ if test ${ac_cv_search_clock_gettime+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS +else $as_nop + ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char clock_gettime (void); + builtin and then its argument prototype would still apply. */ +char clock_gettime (); int main (void) { @@ -17240,13 +15983,11 @@ if test ${ac_cv_search_clock_gettime+y} then : -else case e in #( - e) ac_cv_search_clock_gettime=no ;; -esac +else $as_nop + ac_cv_search_clock_gettime=no fi rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac +LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5 printf "%s\n" "$ac_cv_search_clock_gettime" >&6; } @@ -17272,21 +16013,15 @@ if test ${ac_cv_search_nanosleep+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS +else $as_nop + ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char nanosleep (void); + builtin and then its argument prototype would still apply. */ +char nanosleep (); int main (void) { @@ -17317,13 +16052,11 @@ if test ${ac_cv_search_nanosleep+y} then : -else case e in #( - e) ac_cv_search_nanosleep=no ;; -esac +else $as_nop + ac_cv_search_nanosleep=no fi rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac +LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_nanosleep" >&5 printf "%s\n" "$ac_cv_search_nanosleep" >&6; } @@ -17348,21 +16081,15 @@ if test ${ac_cv_search_clock_nanosleep+y} then : printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS +else $as_nop + ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char clock_nanosleep (void); + builtin and then its argument prototype would still apply. */ +char clock_nanosleep (); int main (void) { @@ -17393,13 +16120,11 @@ if test ${ac_cv_search_clock_nanosleep+y} then : -else case e in #( - e) ac_cv_search_clock_nanosleep=no ;; -esac +else $as_nop + ac_cv_search_clock_nanosleep=no fi rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac +LIBS=$ac_func_search_save_LIBS fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_nanosleep" >&5 printf "%s\n" "$ac_cv_search_clock_nanosleep" >&6; } @@ -17431,8 +16156,8 @@ # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # -# 'ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* 'ac_cv_foo' will be assigned the +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF @@ -17462,14 +16187,14 @@ (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # 'set' does not quote correctly, so add quotes: double-quote + # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) - # 'set' quotes correctly as required by POSIX, so do not add quotes. + # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | @@ -17542,18 +16267,6 @@ fi { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: done" >&5 printf "%s\n" "done" >&6; } -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; -esac -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi - if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' @@ -17611,6 +16324,7 @@ # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh +as_nop=: if test ${ZSH_VERSION+y} && (emulate sh) >/dev/null 2>&1 then : emulate sh @@ -17619,13 +16333,12 @@ # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST -else case e in #( - e) case `(set -o) 2>/dev/null` in #( +else $as_nop + case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; -esac ;; esac fi @@ -17697,7 +16410,7 @@ ;; esac -# We did not find ourselves, most probably we were run as 'sh COMMAND' +# We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 @@ -17726,6 +16439,7 @@ } # as_fn_error + # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. @@ -17765,12 +16479,11 @@ { eval $1+=\$2 }' -else case e in #( - e) as_fn_append () +else $as_nop + as_fn_append () { eval $1=\$$1\$2 - } ;; -esac + } fi # as_fn_append # as_fn_arith ARG... @@ -17784,12 +16497,11 @@ { as_val=$(( $* )) }' -else case e in #( - e) as_fn_arith () +else $as_nop + as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` - } ;; -esac + } fi # as_fn_arith @@ -17872,9 +16584,9 @@ if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: - # 1) On MSYS, both 'ln -s file dir' and 'ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; 'ln -s' creates a wrapper executable. - # In both cases, we have to default to 'cp -pR'. + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then @@ -17955,12 +16667,10 @@ as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. -as_sed_cpp="y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" -as_tr_cpp="eval sed '$as_sed_cpp'" # deprecated +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. -as_sed_sh="y%*+%pp%;s%[^_$as_cr_alnum]%_%g" -as_tr_sh="eval sed '$as_sed_sh'" # deprecated +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 @@ -17976,7 +16686,7 @@ # values after options handling. ac_log=" This file was extended by iperf $as_me 3.18+, which was -generated by GNU Autoconf 2.72. Invocation command line was +generated by GNU Autoconf 2.71. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -18008,7 +16718,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -'$as_me' instantiates files and other configuration actions +\`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. @@ -18045,10 +16755,10 @@ ac_cs_config='$ac_cs_config_escaped' ac_cs_version="\\ iperf config.status 3.18+ -configured by $0, generated by GNU Autoconf 2.72, +configured by $0, generated by GNU Autoconf 2.71, with options \\"\$ac_cs_config\\" -Copyright (C) 2023 Free Software Foundation, Inc. +Copyright (C) 2021 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -18110,8 +16820,8 @@ ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - as_fn_error $? "ambiguous option: '$1' -Try '$0 --help' for more information.";; + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; --help | --hel | -h ) printf "%s\n" "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ @@ -18119,8 +16829,8 @@ ac_cs_silent=: ;; # This is an error. - -*) as_fn_error $? "unrecognized option: '$1' -Try '$0 --help' for more information." ;; + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; @@ -18207,7 +16917,6 @@ lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -FILECMD='`$ECHO "$FILECMD" | $SED "$delay_single_quote_subst"`' OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' @@ -18216,7 +16925,6 @@ DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -lt_ar_flags='`$ECHO "$lt_ar_flags" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' @@ -18337,7 +17045,6 @@ lt_SP2NL \ lt_NL2SP \ reload_flag \ -FILECMD \ OBJDUMP \ deplibs_check_method \ file_magic_cmd \ @@ -18346,6 +17053,7 @@ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ +AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ @@ -18467,7 +17175,7 @@ "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; "iperf3.spec") CONFIG_FILES="$CONFIG_FILES iperf3.spec" ;; - *) as_fn_error $? "invalid argument: '$ac_config_target'" "$LINENO" 5;; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -18487,7 +17195,7 @@ # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to '$tmp'. +# after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= @@ -18511,7 +17219,7 @@ # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. -# This happens for instance with './config.status config.h'. +# This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then @@ -18669,13 +17377,13 @@ # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with './config.status Makefile'. +# This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF -# Transform confdefs.h into an awk script 'defines.awk', embedded as +# Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. @@ -18785,7 +17493,7 @@ esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag '$ac_tag'" "$LINENO" 5;; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -18807,19 +17515,19 @@ -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain ':'. + # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - as_fn_error 1 "cannot find input file: '$ac_f'" "$LINENO" 5;; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`printf "%s\n" "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done - # Let's still pretend it is 'configure' which instantiates (i.e., don't + # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` @@ -18952,7 +17660,7 @@ esac _ACEOF -# Neutralize VPATH when '$srcdir' = '.'. +# Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 @@ -18983,9 +17691,9 @@ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && - { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable 'datarootdir' + { printf "%s\n" "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 -printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable 'datarootdir' +printf "%s\n" "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" @@ -19140,15 +17848,15 @@ (exit $ac_status); } || am_rc=$? done if test $am_rc -ne 0; then - { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;} + { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +printf "%s\n" "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "Something went wrong bootstrapping makefile fragments for automatic dependency tracking. If GNU make was not used, consider re-running the configure script with MAKE=\"gmake\" (or whatever is necessary). You can also try re-running configure with the '--disable-dependency-tracking' option to at least be able to build the package (albeit without support for automatic dependency tracking). -See 'config.log' for more details" "$LINENO" 5; } +See \`config.log' for more details" "$LINENO" 5; } fi { am_dirpart=; unset am_dirpart;} { am_filepart=; unset am_filepart;} @@ -19177,13 +17885,13 @@ # Provide generalized library-building support services. # Written by Gordon Matzigkeit, 1996 -# Copyright (C) 2024 Free Software Foundation, Inc. +# Copyright (C) 2014 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. # GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or +# the Free Software Foundation; either version 2 of of the License, or # (at your option) any later version. # # As a special exception to the GNU General Public License, if you @@ -19291,9 +17999,6 @@ # convert \$build files to toolchain format. to_tool_file_cmd=$lt_cv_to_tool_file_cmd -# A file(cmd) program that detects file types. -FILECMD=$lt_FILECMD - # An object symbol dumper. OBJDUMP=$lt_OBJDUMP @@ -19318,11 +18023,8 @@ # The archiver. AR=$lt_AR -# Flags to create an archive (by configure). -lt_ar_flags=$lt_ar_flags - # Flags to create an archive. -AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"} +AR_FLAGS=$lt_AR_FLAGS # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec @@ -19564,7 +18266,7 @@ # Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes # DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e. impossible to change by setting \$shlibpath_var if the +# "absolute",i.e impossible to change by setting \$shlibpath_var if the # library is relocated. hardcode_direct_absolute=$hardcode_direct_absolute @@ -19698,7 +18400,7 @@ # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? - $SED '$q' "$ltmain" >> "$cfgfile" \ + sed '$q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" ||
diff --git a/examples/Makefile.in b/examples/Makefile.in index bf0968b..e578c91 100644 --- a/examples/Makefile.in +++ b/examples/Makefile.in
@@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.17 from Makefile.am. +# Makefile.in generated by automake 1.16.5 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2024 Free Software Foundation, Inc. +# Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -70,8 +70,6 @@ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -am__rm_f = rm -f $(am__rm_f_notfound) -am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -211,7 +209,6 @@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ -FILECMD = @FILECMD@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ @@ -269,10 +266,8 @@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ -am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ -am__xargs_n = @am__xargs_n@ ax_pthread_config = @ax_pthread_config@ bindir = @bindir@ build = @build@ @@ -359,8 +354,13 @@ $(am__aclocal_m4_deps): clean-noinstPROGRAMS: - $(am__rm_f) $(noinst_PROGRAMS) - test -z "$(EXEEXT)" || $(am__rm_f) $(noinst_PROGRAMS:$(EXEEXT)=) + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list mic$(EXEEXT): $(mic_OBJECTS) $(mic_DEPENDENCIES) $(EXTRA_mic_DEPENDENCIES) @rm -f mic$(EXEEXT) @@ -381,7 +381,7 @@ $(am__depfiles_remade): @$(MKDIR_P) $(@D) - @: >>$@ + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ am--depfiles: $(am__depfiles_remade) @@ -552,8 +552,8 @@ clean-generic: distclean-generic: - -$(am__rm_f) $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -564,7 +564,7 @@ mostlyclean-am distclean: distclean-am - -rm -f ./$(DEPDIR)/mic-mic.Po + -rm -f ./$(DEPDIR)/mic-mic.Po -rm -f ./$(DEPDIR)/mis-mis.Po -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ @@ -611,7 +611,7 @@ installcheck-am: maintainer-clean: maintainer-clean-am - -rm -f ./$(DEPDIR)/mic-mic.Po + -rm -f ./$(DEPDIR)/mic-mic.Po -rm -f ./$(DEPDIR)/mis-mis.Po -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic @@ -653,10 +653,3 @@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: - -# Tell GNU make to disable its built-in pattern rules. -%:: %,v -%:: RCS/%,v -%:: RCS/% -%:: s.% -%:: SCCS/s.%
diff --git a/src/Makefile.in b/src/Makefile.in index af36b68..4234f77 100644 --- a/src/Makefile.in +++ b/src/Makefile.in
@@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.17 from Makefile.am. +# Makefile.in generated by automake 1.16.5 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2024 Free Software Foundation, Inc. +# Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -72,8 +72,6 @@ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -am__rm_f = rm -f $(am__rm_f_notfound) -am__rm_rf = rm -rf $(am__rm_f_notfound) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -142,9 +140,10 @@ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ - { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ } LTLIBRARIES = $(lib_LTLIBRARIES) libiperf_la_LIBADD = @@ -434,7 +433,6 @@ # Default flags passed to test drivers. am__common_driver_flags = \ --color-tests "$$am__color_tests" \ - $$am__collect_skipped_logs \ --enable-hard-errors "$$am__enable_hard_errors" \ --expect-failure "$$am__expect_failure" # To be inserted before the command running the test. Creates the @@ -459,11 +457,6 @@ elif test -f "$$f"; then dir=; \ else dir="$(srcdir)/"; fi; \ tst=$$dir$$f; log='$@'; \ -if test -n '$(IGNORE_SKIPPED_LOGS)'; then \ - am__collect_skipped_logs='--collect-skipped-logs no'; \ -else \ - am__collect_skipped_logs=''; \ -fi; \ if test -n '$(DISABLE_HARD_ERRORS)'; then \ am__enable_hard_errors=no; \ else \ @@ -544,7 +537,6 @@ ETAGS = @ETAGS@ EXEEXT = @EXEEXT@ FGREP = @FGREP@ -FILECMD = @FILECMD@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ @@ -602,10 +594,8 @@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ -am__rm_f_notfound = @am__rm_f_notfound@ am__tar = @am__tar@ am__untar = @am__untar@ -am__xargs_n = @am__xargs_n@ ax_pthread_config = @ax_pthread_config@ bindir = @bindir@ build = @build@ @@ -769,12 +759,12 @@ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/iperf_config.h.in $(top_builddir)/config.status - $(AM_V_at)rm -f stamp-h1 - $(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status src/iperf_config.h + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status src/iperf_config.h $(srcdir)/iperf_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - $(AM_V_at)rm -f stamp-h1 - $(AM_V_at)touch $@ + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ distclean-hdr: -rm -f iperf_config.h stamp-h1 @@ -819,15 +809,25 @@ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && $(am__rm_f) $$files + cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: - $(am__rm_f) $(bin_PROGRAMS) - test -z "$(EXEEXT)" || $(am__rm_f) $(bin_PROGRAMS:$(EXEEXT)=) + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list clean-noinstPROGRAMS: - $(am__rm_f) $(noinst_PROGRAMS) - test -z "$(EXEEXT)" || $(am__rm_f) $(noinst_PROGRAMS:$(EXEEXT)=) + @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) @@ -854,13 +854,15 @@ done clean-libLTLIBRARIES: - -$(am__rm_f) $(lib_LTLIBRARIES) + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) @list='$(lib_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done | \ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ sort -u`; \ - echo rm -f $${locs}; \ - $(am__rm_f) $${locs} + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } libiperf.la: $(libiperf_la_OBJECTS) $(libiperf_la_DEPENDENCIES) $(EXTRA_libiperf_la_DEPENDENCIES) $(AM_V_CCLD)$(LINK) -rpath $(libdir) $(libiperf_la_OBJECTS) $(libiperf_la_LIBADD) $(LIBS) @@ -945,7 +947,7 @@ $(am__depfiles_remade): @$(MKDIR_P) $(@D) - @: >>$@ + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ am--depfiles: $(am__depfiles_remade) @@ -1498,6 +1500,7 @@ am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) am--force-recheck: @: + $(TEST_SUITE_LOG): $(TEST_LOGS) @$(am__set_TESTS_bases); \ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ @@ -1573,37 +1576,10 @@ result_count $$1 "XPASS:" $$xpass "$$red"; \ result_count $$1 "ERROR:" $$error "$$mgn"; \ }; \ - output_system_information () \ - { \ - echo; \ - { uname -a | $(AWK) '{ \ - printf "System information (uname -a):"; \ - for (i = 1; i < NF; ++i) \ - { \ - if (i != 2) \ - printf " %s", $$i; \ - } \ - printf "\n"; \ -}'; } 2>&1; \ - if test -r /etc/os-release; then \ - echo "Distribution information (/etc/os-release):"; \ - sed 8q /etc/os-release; \ - elif test -r /etc/issue; then \ - echo "Distribution information (/etc/issue):"; \ - cat /etc/issue; \ - fi; \ - }; \ - please_report () \ - { \ -echo "Some test(s) failed. Please report this to $(PACKAGE_BUGREPORT),"; \ -echo "together with the test-suite.log file (gzipped) and your system"; \ -echo "information. Thanks."; \ - }; \ { \ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ $(am__rst_title); \ create_testsuite_report --no-color; \ - output_system_information; \ echo; \ echo ".. contents:: :depth: 2"; \ echo; \ @@ -1623,25 +1599,26 @@ create_testsuite_report --maybe-color; \ echo "$$col$$br$$std"; \ if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG) for debugging.$${std}";\ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ if test -n "$(PACKAGE_BUGREPORT)"; then \ - please_report | sed -e "s/^/$${col}/" -e s/'$$'/"$${std}"/; \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ fi; \ echo "$$col$$br$$std"; \ fi; \ $$success || exit 1 check-TESTS: - @$(am__rm_f) $(RECHECK_LOGS) - @$(am__rm_f) $(RECHECK_LOGS:.log=.trs) - @$(am__rm_f) $(TEST_SUITE_LOG) + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ log_list=`for i in $$bases; do echo $$i.log; done`; \ - log_list=`echo $$log_list`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ exit $$?; recheck: all - @$(am__rm_f) $(TEST_SUITE_LOG) + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ bases=`for i in $$bases; do echo $$i; done \ | $(am__list_recheck_tests)` || exit 1; \ @@ -1764,15 +1741,15 @@ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: - -$(am__rm_f) $(TEST_LOGS) - -$(am__rm_f) $(TEST_LOGS:.log=.trs) - -$(am__rm_f) $(TEST_SUITE_LOG) + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: distclean-generic: - -$(am__rm_f) $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -1783,7 +1760,7 @@ clean-libtool clean-noinstPROGRAMS mostlyclean-am distclean: distclean-am - -rm -f ./$(DEPDIR)/cjson.Plo + -rm -f ./$(DEPDIR)/cjson.Plo -rm -f ./$(DEPDIR)/dscp.Plo -rm -f ./$(DEPDIR)/iperf3-main.Po -rm -f ./$(DEPDIR)/iperf3_profile-cjson.Po @@ -1871,7 +1848,7 @@ installcheck-am: maintainer-clean: maintainer-clean-am - -rm -f ./$(DEPDIR)/cjson.Plo + -rm -f ./$(DEPDIR)/cjson.Plo -rm -f ./$(DEPDIR)/dscp.Plo -rm -f ./$(DEPDIR)/iperf3-main.Po -rm -f ./$(DEPDIR)/iperf3_profile-cjson.Po @@ -1963,10 +1940,3 @@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: - -# Tell GNU make to disable its built-in pattern rules. -%:: %,v -%:: RCS/%,v -%:: RCS/% -%:: s.% -%:: SCCS/s.%
diff --git a/src/iperf_config.h.in b/src/iperf_config.h.in index b0ae3cd..18178e4 100644 --- a/src/iperf_config.h.in +++ b/src/iperf_config.h.in
@@ -1,18 +1,18 @@ /* src/iperf_config.h.in. Generated from configure.ac by autoheader. */ -/* Define to 1 if you have the 'clock_gettime' function. */ +/* Define to 1 if you have the `clock_gettime' function. */ #undef HAVE_CLOCK_GETTIME -/* Define to 1 if you have the 'clock_nanosleep' function. */ +/* Define to 1 if you have the `clock_nanosleep' function. */ #undef HAVE_CLOCK_NANOSLEEP -/* Define to 1 if you have the 'cpuset_setaffinity' function. */ +/* Define to 1 if you have the `cpuset_setaffinity' function. */ #undef HAVE_CPUSET_SETAFFINITY /* Have CPU affinity support. */ #undef HAVE_CPU_AFFINITY -/* Define to 1 if you have the 'daemon' function. */ +/* Define to 1 if you have the `daemon' function. */ #undef HAVE_DAEMON /* Define to 1 if you have the <dlfcn.h> header file. */ @@ -27,7 +27,7 @@ /* Have IPv6 flowlabel support. */ #undef HAVE_FLOWLABEL -/* Define to 1 if you have the 'getline' function. */ +/* Define to 1 if you have the `getline' function. */ #undef HAVE_GETLINE /* Define to 1 if you have the <inttypes.h> header file. */ @@ -48,7 +48,7 @@ /* Define to 1 if you have the <linux/tcp.h> header file. */ #undef HAVE_LINUX_TCP_H -/* Define to 1 if you have the 'nanosleep' function. */ +/* Define to 1 if you have the `nanosleep' function. */ #undef HAVE_NANOSLEEP /* Define to 1 if you have the <netinet/sctp.h> header file. */ @@ -63,16 +63,16 @@ /* Have PTHREAD_PRIO_INHERIT. */ #undef HAVE_PTHREAD_PRIO_INHERIT -/* Define to 1 if you have the 'sched_setaffinity' function. */ +/* Define to 1 if you have the `sched_setaffinity' function. */ #undef HAVE_SCHED_SETAFFINITY /* Have SCTP support. */ #undef HAVE_SCTP_H -/* Define to 1 if you have the 'sendfile' function. */ +/* Define to 1 if you have the `sendfile' function. */ #undef HAVE_SENDFILE -/* Define to 1 if you have the 'SetProcessAffinityMask' function. */ +/* Define to 1 if you have the `SetProcessAffinityMask' function. */ #undef HAVE_SETPROCESSAFFINITYMASK /* Have SO_BINDTODEVICE sockopt. */ @@ -102,7 +102,7 @@ /* Define to 1 if you have the <string.h> header file. */ #undef HAVE_STRING_H -/* Define to 1 if the system has the type 'struct sctp_assoc_value'. */ +/* Define to 1 if the system has the type `struct sctp_assoc_value'. */ #undef HAVE_STRUCT_SCTP_ASSOC_VALUE /* Define to 1 if you have the <sys/endian.h> header file. */ @@ -123,6 +123,9 @@ /* Have tcpi_snd_wnd field in tcp_info. */ #undef HAVE_TCP_INFO_SND_WND +/* Have TCP_KEEPIDLE sockopt. */ +#undef HAVE_TCP_KEEPALIVE + /* Have TCP_USER_TIMEOUT sockopt. */ #undef HAVE_TCP_USER_TIMEOUT @@ -157,7 +160,7 @@ your system. */ #undef PTHREAD_CREATE_JOINABLE -/* Define to 1 if all of the C89 standard headers exist (not just the ones +/* Define to 1 if all of the C90 standard headers exist (not just the ones required in a freestanding environment). This macro is provided for backward compatibility; new code need not use it. */ #undef STDC_HEADERS @@ -165,5 +168,5 @@ /* Version number of package */ #undef VERSION -/* Define to empty if 'const' does not conform to ANSI C. */ +/* Define to empty if `const' does not conform to ANSI C. */ #undef const