tests: AP and STA tracking with passive scan
Verify that Public Action frame from a STA is used to add a tracking
entry.
Signed-off-by: Jouni Malinen <j@w1.fi>
diff --git a/tests/hwsim/test_ap_track.py b/tests/hwsim/test_ap_track.py
index a12c1c6..5ca2b60 100644
--- a/tests/hwsim/test_ap_track.py
+++ b/tests/hwsim/test_ap_track.py
@@ -159,6 +159,63 @@
raise Exception("No Neighbor Report element: " + ev)
dev[0].request("DISCONNECT")
+def test_ap_track_sta_no_auth_passive(dev, apdev):
+ """AP rejecting authentication from dualband STA on 2.4 GHz (passive)"""
+ try:
+ _test_ap_track_sta_no_auth_passive(dev, apdev)
+ finally:
+ subprocess.call(['iw', 'reg', 'set', '00'])
+
+def _test_ap_track_sta_no_auth_passive(dev, apdev):
+ dev[0].flush_scan_cache()
+
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "no_auth_if_seen_on": apdev[1]['ifname'] }
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ bssid = apdev[0]['bssid']
+
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "interworking": "1",
+ "venue_name": "eng:Venue",
+ "track_sta_max_num": "100" }
+ hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
+ bssid2 = apdev[1]['bssid']
+
+ dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
+ for i in range(10):
+ dev[0].request("SCAN freq=5200 passive=1")
+ ev = dev[0].wait_event(["CTRL-EVENT-SCAN-RESULTS"], timeout=5)
+ if ev is None:
+ raise Exception("Scan did not complete")
+ if dev[0].get_bss(bssid2):
+ break
+ if i == 9:
+ raise Exception("AP not found with passive scans")
+
+ if "OK" not in dev[0].request("ANQP_GET " + bssid2 + " 258"):
+ raise Exception("ANQP_GET command failed")
+ ev = dev[0].wait_event(["RX-ANQP"], timeout=1)
+ if ev is None or "Venue Name" not in ev:
+ raise Exception("Did not receive Venue Name")
+
+ dev[0].connect("track", key_mgmt="NONE", scan_freq="2437",
+ freq_list="2437", wait_connect=False)
+ ev = dev[0].wait_event([ "CTRL-EVENT-CONNECTED",
+ "CTRL-EVENT-AUTH-REJECT" ], timeout=10)
+ if ev is None:
+ raise Exception("Unknown connection result")
+ if "CTRL-EVENT-CONNECTED" in ev:
+ raise Exception("Unexpected connection")
+ if "status_code=82" not in ev:
+ raise Exception("Unexpected rejection reason: " + ev)
+ dev[0].request("DISCONNECT")
+
def test_ap_track_sta_force_5ghz(dev, apdev):
"""Dualband AP forcing dualband STA to connect on 5 GHz"""
try:
