| // |
| // Copyright (C) 2015 LunarG, Inc. |
| // |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions |
| // are met: |
| // |
| // Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // |
| // Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // |
| // Neither the name of 3Dlabs Inc. Ltd. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| // FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| // COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| // INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| // BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| // LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| // LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| // ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| // POSSIBILITY OF SUCH DAMAGE. |
| // |
| |
| #include "SPVRemapper.h" |
| #include "doc.h" |
| |
| #if !defined (use_cpp11) |
| // ... not supported before C++11 |
| #else // defined (use_cpp11) |
| |
| #include <algorithm> |
| #include <cassert> |
| #include "../glslang/Include/Common.h" |
| |
| namespace spv { |
| |
| // By default, just abort on error. Can be overridden via RegisterErrorHandler |
| spirvbin_t::errorfn_t spirvbin_t::errorHandler = [](const std::string&) { exit(5); }; |
| // By default, eat log messages. Can be overridden via RegisterLogHandler |
| spirvbin_t::logfn_t spirvbin_t::logHandler = [](const std::string&) { }; |
| |
| // This can be overridden to provide other message behavior if needed |
| void spirvbin_t::msg(int minVerbosity, int indent, const std::string& txt) const |
| { |
| if (verbose >= minVerbosity) |
| logHandler(std::string(indent, ' ') + txt); |
| } |
| |
| // hash opcode, with special handling for OpExtInst |
| std::uint32_t spirvbin_t::asOpCodeHash(unsigned word) |
| { |
| const spv::Op opCode = asOpCode(word); |
| |
| std::uint32_t offset = 0; |
| |
| switch (opCode) { |
| case spv::OpExtInst: |
| offset += asId(word + 4); break; |
| default: |
| break; |
| } |
| |
| return opCode * 19 + offset; // 19 = small prime |
| } |
| |
| spirvbin_t::range_t spirvbin_t::literalRange(spv::Op opCode) const |
| { |
| static const int maxCount = 1<<30; |
| |
| switch (opCode) { |
| case spv::OpTypeFloat: // fall through... |
| case spv::OpTypePointer: return range_t(2, 3); |
| case spv::OpTypeInt: return range_t(2, 4); |
| // TODO: case spv::OpTypeImage: |
| // TODO: case spv::OpTypeSampledImage: |
| case spv::OpTypeSampler: return range_t(3, 8); |
| case spv::OpTypeVector: // fall through |
| case spv::OpTypeMatrix: // ... |
| case spv::OpTypePipe: return range_t(3, 4); |
| case spv::OpConstant: return range_t(3, maxCount); |
| default: return range_t(0, 0); |
| } |
| } |
| |
| spirvbin_t::range_t spirvbin_t::typeRange(spv::Op opCode) const |
| { |
| static const int maxCount = 1<<30; |
| |
| if (isConstOp(opCode)) |
| return range_t(1, 2); |
| |
| switch (opCode) { |
| case spv::OpTypeVector: // fall through |
| case spv::OpTypeMatrix: // ... |
| case spv::OpTypeSampler: // ... |
| case spv::OpTypeArray: // ... |
| case spv::OpTypeRuntimeArray: // ... |
| case spv::OpTypePipe: return range_t(2, 3); |
| case spv::OpTypeStruct: // fall through |
| case spv::OpTypeFunction: return range_t(2, maxCount); |
| case spv::OpTypePointer: return range_t(3, 4); |
| default: return range_t(0, 0); |
| } |
| } |
| |
| spirvbin_t::range_t spirvbin_t::constRange(spv::Op opCode) const |
| { |
| static const int maxCount = 1<<30; |
| |
| switch (opCode) { |
| case spv::OpTypeArray: // fall through... |
| case spv::OpTypeRuntimeArray: return range_t(3, 4); |
| case spv::OpConstantComposite: return range_t(3, maxCount); |
| default: return range_t(0, 0); |
| } |
| } |
| |
| // Return the size of a type in 32-bit words. This currently only |
| // handles ints and floats, and is only invoked by queries which must be |
| // integer types. If ever needed, it can be generalized. |
| unsigned spirvbin_t::typeSizeInWords(spv::Id id) const |
| { |
| const unsigned typeStart = idPos(id); |
| const spv::Op opCode = asOpCode(typeStart); |
| |
| if (errorLatch) |
| return 0; |
| |
| switch (opCode) { |
| case spv::OpTypeInt: // fall through... |
| case spv::OpTypeFloat: return (spv[typeStart+2]+31)/32; |
| default: |
| return 0; |
| } |
| } |
| |
| // Looks up the type of a given const or variable ID, and |
| // returns its size in 32-bit words. |
| unsigned spirvbin_t::idTypeSizeInWords(spv::Id id) const |
| { |
| const auto tid_it = idTypeSizeMap.find(id); |
| if (tid_it == idTypeSizeMap.end()) { |
| error("type size for ID not found"); |
| return 0; |
| } |
| |
| return tid_it->second; |
| } |
| |
| // Is this an opcode we should remove when using --strip? |
| bool spirvbin_t::isStripOp(spv::Op opCode) const |
| { |
| switch (opCode) { |
| case spv::OpSource: |
| case spv::OpSourceExtension: |
| case spv::OpName: |
| case spv::OpMemberName: |
| case spv::OpLine: return true; |
| default: return false; |
| } |
| } |
| |
| // Return true if this opcode is flow control |
| bool spirvbin_t::isFlowCtrl(spv::Op opCode) const |
| { |
| switch (opCode) { |
| case spv::OpBranchConditional: |
| case spv::OpBranch: |
| case spv::OpSwitch: |
| case spv::OpLoopMerge: |
| case spv::OpSelectionMerge: |
| case spv::OpLabel: |
| case spv::OpFunction: |
| case spv::OpFunctionEnd: return true; |
| default: return false; |
| } |
| } |
| |
| // Return true if this opcode defines a type |
| bool spirvbin_t::isTypeOp(spv::Op opCode) const |
| { |
| switch (opCode) { |
| case spv::OpTypeVoid: |
| case spv::OpTypeBool: |
| case spv::OpTypeInt: |
| case spv::OpTypeFloat: |
| case spv::OpTypeVector: |
| case spv::OpTypeMatrix: |
| case spv::OpTypeImage: |
| case spv::OpTypeSampler: |
| case spv::OpTypeArray: |
| case spv::OpTypeRuntimeArray: |
| case spv::OpTypeStruct: |
| case spv::OpTypeOpaque: |
| case spv::OpTypePointer: |
| case spv::OpTypeFunction: |
| case spv::OpTypeEvent: |
| case spv::OpTypeDeviceEvent: |
| case spv::OpTypeReserveId: |
| case spv::OpTypeQueue: |
| case spv::OpTypeSampledImage: |
| case spv::OpTypePipe: return true; |
| default: return false; |
| } |
| } |
| |
| // Return true if this opcode defines a constant |
| bool spirvbin_t::isConstOp(spv::Op opCode) const |
| { |
| switch (opCode) { |
| case spv::OpConstantNull: |
| case spv::OpConstantSampler: |
| error("unimplemented constant type"); |
| return true; |
| |
| case spv::OpConstantTrue: |
| case spv::OpConstantFalse: |
| case spv::OpConstantComposite: |
| case spv::OpConstant: |
| return true; |
| |
| default: |
| return false; |
| } |
| } |
| |
| const auto inst_fn_nop = [](spv::Op, unsigned) { return false; }; |
| const auto op_fn_nop = [](spv::Id&) { }; |
| |
| // g++ doesn't like these defined in the class proper in an anonymous namespace. |
| // Dunno why. Also MSVC doesn't like the constexpr keyword. Also dunno why. |
| // Defining them externally seems to please both compilers, so, here they are. |
| const spv::Id spirvbin_t::unmapped = spv::Id(-10000); |
| const spv::Id spirvbin_t::unused = spv::Id(-10001); |
| const int spirvbin_t::header_size = 5; |
| |
| spv::Id spirvbin_t::nextUnusedId(spv::Id id) |
| { |
| while (isNewIdMapped(id)) // search for an unused ID |
| ++id; |
| |
| return id; |
| } |
| |
| spv::Id spirvbin_t::localId(spv::Id id, spv::Id newId) |
| { |
| //assert(id != spv::NoResult && newId != spv::NoResult); |
| |
| if (id > bound()) { |
| error(std::string("ID out of range: ") + std::to_string(id)); |
| return spirvbin_t::unused; |
| } |
| |
| if (id >= idMapL.size()) |
| idMapL.resize(id+1, unused); |
| |
| if (newId != unmapped && newId != unused) { |
| if (isOldIdUnused(id)) { |
| error(std::string("ID unused in module: ") + std::to_string(id)); |
| return spirvbin_t::unused; |
| } |
| |
| if (!isOldIdUnmapped(id)) { |
| error(std::string("ID already mapped: ") + std::to_string(id) + " -> " |
| + std::to_string(localId(id))); |
| |
| return spirvbin_t::unused; |
| } |
| |
| if (isNewIdMapped(newId)) { |
| error(std::string("ID already used in module: ") + std::to_string(newId)); |
| return spirvbin_t::unused; |
| } |
| |
| msg(4, 4, std::string("map: ") + std::to_string(id) + " -> " + std::to_string(newId)); |
| setMapped(newId); |
| largestNewId = std::max(largestNewId, newId); |
| } |
| |
| return idMapL[id] = newId; |
| } |
| |
| // Parse a literal string from the SPIR binary and return it as an std::string |
| // Due to C++11 RValue references, this doesn't copy the result string. |
| std::string spirvbin_t::literalString(unsigned word) const |
| { |
| std::string literal; |
| |
| literal.reserve(16); |
| |
| const char* bytes = reinterpret_cast<const char*>(spv.data() + word); |
| |
| while (bytes && *bytes) |
| literal += *bytes++; |
| |
| return literal; |
| } |
| |
| void spirvbin_t::applyMap() |
| { |
| msg(3, 2, std::string("Applying map: ")); |
| |
| // Map local IDs through the ID map |
| process(inst_fn_nop, // ignore instructions |
| [this](spv::Id& id) { |
| id = localId(id); |
| |
| if (errorLatch) |
| return; |
| |
| assert(id != unused && id != unmapped); |
| } |
| ); |
| } |
| |
| // Find free IDs for anything we haven't mapped |
| void spirvbin_t::mapRemainder() |
| { |
| msg(3, 2, std::string("Remapping remainder: ")); |
| |
| spv::Id unusedId = 1; // can't use 0: that's NoResult |
| spirword_t maxBound = 0; |
| |
| for (spv::Id id = 0; id < idMapL.size(); ++id) { |
| if (isOldIdUnused(id)) |
| continue; |
| |
| // Find a new mapping for any used but unmapped IDs |
| if (isOldIdUnmapped(id)) { |
| localId(id, unusedId = nextUnusedId(unusedId)); |
| if (errorLatch) |
| return; |
| } |
| |
| if (isOldIdUnmapped(id)) { |
| error(std::string("old ID not mapped: ") + std::to_string(id)); |
| return; |
| } |
| |
| // Track max bound |
| maxBound = std::max(maxBound, localId(id) + 1); |
| |
| if (errorLatch) |
| return; |
| } |
| |
| bound(maxBound); // reset header ID bound to as big as it now needs to be |
| } |
| |
| // Mark debug instructions for stripping |
| void spirvbin_t::stripDebug() |
| { |
| // Strip instructions in the stripOp set: debug info. |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| // remember opcodes we want to strip later |
| if (isStripOp(opCode)) |
| stripInst(start); |
| return true; |
| }, |
| op_fn_nop); |
| } |
| |
| // Mark instructions that refer to now-removed IDs for stripping |
| void spirvbin_t::stripDeadRefs() |
| { |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| // strip opcodes pointing to removed data |
| switch (opCode) { |
| case spv::OpName: |
| case spv::OpMemberName: |
| case spv::OpDecorate: |
| case spv::OpMemberDecorate: |
| if (idPosR.find(asId(start+1)) == idPosR.end()) |
| stripInst(start); |
| break; |
| default: |
| break; // leave it alone |
| } |
| |
| return true; |
| }, |
| op_fn_nop); |
| |
| strip(); |
| } |
| |
| // Update local maps of ID, type, etc positions |
| void spirvbin_t::buildLocalMaps() |
| { |
| msg(2, 2, std::string("build local maps: ")); |
| |
| mapped.clear(); |
| idMapL.clear(); |
| // preserve nameMap, so we don't clear that. |
| fnPos.clear(); |
| fnCalls.clear(); |
| typeConstPos.clear(); |
| idPosR.clear(); |
| entryPoint = spv::NoResult; |
| largestNewId = 0; |
| |
| idMapL.resize(bound(), unused); |
| |
| int fnStart = 0; |
| spv::Id fnRes = spv::NoResult; |
| |
| // build local Id and name maps |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| unsigned word = start+1; |
| spv::Id typeId = spv::NoResult; |
| |
| if (spv::InstructionDesc[opCode].hasType()) |
| typeId = asId(word++); |
| |
| // If there's a result ID, remember the size of its type |
| if (spv::InstructionDesc[opCode].hasResult()) { |
| const spv::Id resultId = asId(word++); |
| idPosR[resultId] = start; |
| |
| if (typeId != spv::NoResult) { |
| const unsigned idTypeSize = typeSizeInWords(typeId); |
| |
| if (errorLatch) |
| return false; |
| |
| if (idTypeSize != 0) |
| idTypeSizeMap[resultId] = idTypeSize; |
| } |
| } |
| |
| if (opCode == spv::Op::OpName) { |
| const spv::Id target = asId(start+1); |
| const std::string name = literalString(start+2); |
| nameMap[name] = target; |
| |
| } else if (opCode == spv::Op::OpFunctionCall) { |
| ++fnCalls[asId(start + 3)]; |
| } else if (opCode == spv::Op::OpEntryPoint) { |
| entryPoint = asId(start + 2); |
| } else if (opCode == spv::Op::OpFunction) { |
| if (fnStart != 0) { |
| error("nested function found"); |
| return false; |
| } |
| |
| fnStart = start; |
| fnRes = asId(start + 2); |
| } else if (opCode == spv::Op::OpFunctionEnd) { |
| assert(fnRes != spv::NoResult); |
| if (fnStart == 0) { |
| error("function end without function start"); |
| return false; |
| } |
| |
| fnPos[fnRes] = range_t(fnStart, start + asWordCount(start)); |
| fnStart = 0; |
| } else if (isConstOp(opCode)) { |
| if (errorLatch) |
| return false; |
| |
| assert(asId(start + 2) != spv::NoResult); |
| typeConstPos.insert(start); |
| } else if (isTypeOp(opCode)) { |
| assert(asId(start + 1) != spv::NoResult); |
| typeConstPos.insert(start); |
| } |
| |
| return false; |
| }, |
| |
| [this](spv::Id& id) { localId(id, unmapped); } |
| ); |
| } |
| |
| // Validate the SPIR header |
| void spirvbin_t::validate() const |
| { |
| msg(2, 2, std::string("validating: ")); |
| |
| if (spv.size() < header_size) { |
| error("file too short: "); |
| return; |
| } |
| |
| if (magic() != spv::MagicNumber) { |
| error("bad magic number"); |
| return; |
| } |
| |
| // field 1 = version |
| // field 2 = generator magic |
| // field 3 = result <id> bound |
| |
| if (schemaNum() != 0) { |
| error("bad schema, must be 0"); |
| return; |
| } |
| } |
| |
| int spirvbin_t::processInstruction(unsigned word, instfn_t instFn, idfn_t idFn) |
| { |
| const auto instructionStart = word; |
| const unsigned wordCount = asWordCount(instructionStart); |
| const int nextInst = word++ + wordCount; |
| spv::Op opCode = asOpCode(instructionStart); |
| |
| if (nextInst > int(spv.size())) { |
| error("spir instruction terminated too early"); |
| return -1; |
| } |
| |
| // Base for computing number of operands; will be updated as more is learned |
| unsigned numOperands = wordCount - 1; |
| |
| if (instFn(opCode, instructionStart)) |
| return nextInst; |
| |
| // Read type and result ID from instruction desc table |
| if (spv::InstructionDesc[opCode].hasType()) { |
| idFn(asId(word++)); |
| --numOperands; |
| } |
| |
| if (spv::InstructionDesc[opCode].hasResult()) { |
| idFn(asId(word++)); |
| --numOperands; |
| } |
| |
| // Extended instructions: currently, assume everything is an ID. |
| // TODO: add whatever data we need for exceptions to that |
| if (opCode == spv::OpExtInst) { |
| word += 2; // instruction set, and instruction from set |
| numOperands -= 2; |
| |
| for (unsigned op=0; op < numOperands; ++op) |
| idFn(asId(word++)); // ID |
| |
| return nextInst; |
| } |
| |
| // Circular buffer so we can look back at previous unmapped values during the mapping pass. |
| static const unsigned idBufferSize = 4; |
| spv::Id idBuffer[idBufferSize]; |
| unsigned idBufferPos = 0; |
| |
| // Store IDs from instruction in our map |
| for (int op = 0; numOperands > 0; ++op, --numOperands) { |
| // SpecConstantOp is special: it includes the operands of another opcode which is |
| // given as a literal in the 3rd word. We will switch over to pretending that the |
| // opcode being processed is the literal opcode value of the SpecConstantOp. See the |
| // SPIRV spec for details. This way we will handle IDs and literals as appropriate for |
| // the embedded op. |
| if (opCode == spv::OpSpecConstantOp) { |
| if (op == 0) { |
| opCode = asOpCode(word++); // this is the opcode embedded in the SpecConstantOp. |
| --numOperands; |
| } |
| } |
| |
| switch (spv::InstructionDesc[opCode].operands.getClass(op)) { |
| case spv::OperandId: |
| case spv::OperandScope: |
| case spv::OperandMemorySemantics: |
| idBuffer[idBufferPos] = asId(word); |
| idBufferPos = (idBufferPos + 1) % idBufferSize; |
| idFn(asId(word++)); |
| break; |
| |
| case spv::OperandVariableIds: |
| for (unsigned i = 0; i < numOperands; ++i) |
| idFn(asId(word++)); |
| return nextInst; |
| |
| case spv::OperandVariableLiterals: |
| // for clarity |
| // if (opCode == spv::OpDecorate && asDecoration(word - 1) == spv::DecorationBuiltIn) { |
| // ++word; |
| // --numOperands; |
| // } |
| // word += numOperands; |
| return nextInst; |
| |
| case spv::OperandVariableLiteralId: { |
| if (opCode == OpSwitch) { |
| // word-2 is the position of the selector ID. OpSwitch Literals match its type. |
| // In case the IDs are currently being remapped, we get the word[-2] ID from |
| // the circular idBuffer. |
| const unsigned literalSizePos = (idBufferPos+idBufferSize-2) % idBufferSize; |
| const unsigned literalSize = idTypeSizeInWords(idBuffer[literalSizePos]); |
| const unsigned numLiteralIdPairs = (nextInst-word) / (1+literalSize); |
| |
| if (errorLatch) |
| return -1; |
| |
| for (unsigned arg=0; arg<numLiteralIdPairs; ++arg) { |
| word += literalSize; // literal |
| idFn(asId(word++)); // label |
| } |
| } else { |
| assert(0); // currentely, only OpSwitch uses OperandVariableLiteralId |
| } |
| |
| return nextInst; |
| } |
| |
| case spv::OperandLiteralString: { |
| const int stringWordCount = literalStringWords(literalString(word)); |
| word += stringWordCount; |
| numOperands -= (stringWordCount-1); // -1 because for() header post-decrements |
| break; |
| } |
| |
| // Execution mode might have extra literal operands. Skip them. |
| case spv::OperandExecutionMode: |
| return nextInst; |
| |
| // Single word operands we simply ignore, as they hold no IDs |
| case spv::OperandLiteralNumber: |
| case spv::OperandSource: |
| case spv::OperandExecutionModel: |
| case spv::OperandAddressing: |
| case spv::OperandMemory: |
| case spv::OperandStorage: |
| case spv::OperandDimensionality: |
| case spv::OperandSamplerAddressingMode: |
| case spv::OperandSamplerFilterMode: |
| case spv::OperandSamplerImageFormat: |
| case spv::OperandImageChannelOrder: |
| case spv::OperandImageChannelDataType: |
| case spv::OperandImageOperands: |
| case spv::OperandFPFastMath: |
| case spv::OperandFPRoundingMode: |
| case spv::OperandLinkageType: |
| case spv::OperandAccessQualifier: |
| case spv::OperandFuncParamAttr: |
| case spv::OperandDecoration: |
| case spv::OperandBuiltIn: |
| case spv::OperandSelect: |
| case spv::OperandLoop: |
| case spv::OperandFunction: |
| case spv::OperandMemoryAccess: |
| case spv::OperandGroupOperation: |
| case spv::OperandKernelEnqueueFlags: |
| case spv::OperandKernelProfilingInfo: |
| case spv::OperandCapability: |
| ++word; |
| break; |
| |
| default: |
| assert(0 && "Unhandled Operand Class"); |
| break; |
| } |
| } |
| |
| return nextInst; |
| } |
| |
| // Make a pass over all the instructions and process them given appropriate functions |
| spirvbin_t& spirvbin_t::process(instfn_t instFn, idfn_t idFn, unsigned begin, unsigned end) |
| { |
| // For efficiency, reserve name map space. It can grow if needed. |
| nameMap.reserve(32); |
| |
| // If begin or end == 0, use defaults |
| begin = (begin == 0 ? header_size : begin); |
| end = (end == 0 ? unsigned(spv.size()) : end); |
| |
| // basic parsing and InstructionDesc table borrowed from SpvDisassemble.cpp... |
| unsigned nextInst = unsigned(spv.size()); |
| |
| for (unsigned word = begin; word < end; word = nextInst) { |
| nextInst = processInstruction(word, instFn, idFn); |
| |
| if (errorLatch) |
| return *this; |
| } |
| |
| return *this; |
| } |
| |
| // Apply global name mapping to a single module |
| void spirvbin_t::mapNames() |
| { |
| static const std::uint32_t softTypeIdLimit = 3011; // small prime. TODO: get from options |
| static const std::uint32_t firstMappedID = 3019; // offset into ID space |
| |
| for (const auto& name : nameMap) { |
| std::uint32_t hashval = 1911; |
| for (const char c : name.first) |
| hashval = hashval * 1009 + c; |
| |
| if (isOldIdUnmapped(name.second)) { |
| localId(name.second, nextUnusedId(hashval % softTypeIdLimit + firstMappedID)); |
| if (errorLatch) |
| return; |
| } |
| } |
| } |
| |
| // Map fn contents to IDs of similar functions in other modules |
| void spirvbin_t::mapFnBodies() |
| { |
| static const std::uint32_t softTypeIdLimit = 19071; // small prime. TODO: get from options |
| static const std::uint32_t firstMappedID = 6203; // offset into ID space |
| |
| // Initial approach: go through some high priority opcodes first and assign them |
| // hash values. |
| |
| spv::Id fnId = spv::NoResult; |
| std::vector<unsigned> instPos; |
| instPos.reserve(unsigned(spv.size()) / 16); // initial estimate; can grow if needed. |
| |
| // Build local table of instruction start positions |
| process( |
| [&](spv::Op, unsigned start) { instPos.push_back(start); return true; }, |
| op_fn_nop); |
| |
| if (errorLatch) |
| return; |
| |
| // Window size for context-sensitive canonicalization values |
| // Empirical best size from a single data set. TODO: Would be a good tunable. |
| // We essentially perform a little convolution around each instruction, |
| // to capture the flavor of nearby code, to hopefully match to similar |
| // code in other modules. |
| static const unsigned windowSize = 2; |
| |
| for (unsigned entry = 0; entry < unsigned(instPos.size()); ++entry) { |
| const unsigned start = instPos[entry]; |
| const spv::Op opCode = asOpCode(start); |
| |
| if (opCode == spv::OpFunction) |
| fnId = asId(start + 2); |
| |
| if (opCode == spv::OpFunctionEnd) |
| fnId = spv::NoResult; |
| |
| if (fnId != spv::NoResult) { // if inside a function |
| if (spv::InstructionDesc[opCode].hasResult()) { |
| const unsigned word = start + (spv::InstructionDesc[opCode].hasType() ? 2 : 1); |
| const spv::Id resId = asId(word); |
| std::uint32_t hashval = fnId * 17; // small prime |
| |
| for (unsigned i = entry-1; i >= entry-windowSize; --i) { |
| if (asOpCode(instPos[i]) == spv::OpFunction) |
| break; |
| hashval = hashval * 30103 + asOpCodeHash(instPos[i]); // 30103 = semiarbitrary prime |
| } |
| |
| for (unsigned i = entry; i <= entry + windowSize; ++i) { |
| if (asOpCode(instPos[i]) == spv::OpFunctionEnd) |
| break; |
| hashval = hashval * 30103 + asOpCodeHash(instPos[i]); // 30103 = semiarbitrary prime |
| } |
| |
| if (isOldIdUnmapped(resId)) { |
| localId(resId, nextUnusedId(hashval % softTypeIdLimit + firstMappedID)); |
| if (errorLatch) |
| return; |
| } |
| |
| } |
| } |
| } |
| |
| spv::Op thisOpCode(spv::OpNop); |
| std::unordered_map<int, int> opCounter; |
| int idCounter(0); |
| fnId = spv::NoResult; |
| |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| switch (opCode) { |
| case spv::OpFunction: |
| // Reset counters at each function |
| idCounter = 0; |
| opCounter.clear(); |
| fnId = asId(start + 2); |
| break; |
| |
| case spv::OpImageSampleImplicitLod: |
| case spv::OpImageSampleExplicitLod: |
| case spv::OpImageSampleDrefImplicitLod: |
| case spv::OpImageSampleDrefExplicitLod: |
| case spv::OpImageSampleProjImplicitLod: |
| case spv::OpImageSampleProjExplicitLod: |
| case spv::OpImageSampleProjDrefImplicitLod: |
| case spv::OpImageSampleProjDrefExplicitLod: |
| case spv::OpDot: |
| case spv::OpCompositeExtract: |
| case spv::OpCompositeInsert: |
| case spv::OpVectorShuffle: |
| case spv::OpLabel: |
| case spv::OpVariable: |
| |
| case spv::OpAccessChain: |
| case spv::OpLoad: |
| case spv::OpStore: |
| case spv::OpCompositeConstruct: |
| case spv::OpFunctionCall: |
| ++opCounter[opCode]; |
| idCounter = 0; |
| thisOpCode = opCode; |
| break; |
| default: |
| thisOpCode = spv::OpNop; |
| } |
| |
| return false; |
| }, |
| |
| [&](spv::Id& id) { |
| if (thisOpCode != spv::OpNop) { |
| ++idCounter; |
| const std::uint32_t hashval = opCounter[thisOpCode] * thisOpCode * 50047 + idCounter + fnId * 117; |
| |
| if (isOldIdUnmapped(id)) |
| localId(id, nextUnusedId(hashval % softTypeIdLimit + firstMappedID)); |
| } |
| }); |
| } |
| |
| // EXPERIMENTAL: forward IO and uniform load/stores into operands |
| // This produces invalid Schema-0 SPIRV |
| void spirvbin_t::forwardLoadStores() |
| { |
| idset_t fnLocalVars; // set of function local vars |
| idmap_t idMap; // Map of load result IDs to what they load |
| |
| // EXPERIMENTAL: Forward input and access chain loads into consumptions |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| // Add inputs and uniforms to the map |
| if ((opCode == spv::OpVariable && asWordCount(start) == 4) && |
| (spv[start+3] == spv::StorageClassUniform || |
| spv[start+3] == spv::StorageClassUniformConstant || |
| spv[start+3] == spv::StorageClassInput)) |
| fnLocalVars.insert(asId(start+2)); |
| |
| if (opCode == spv::OpAccessChain && fnLocalVars.count(asId(start+3)) > 0) |
| fnLocalVars.insert(asId(start+2)); |
| |
| if (opCode == spv::OpLoad && fnLocalVars.count(asId(start+3)) > 0) { |
| idMap[asId(start+2)] = asId(start+3); |
| stripInst(start); |
| } |
| |
| return false; |
| }, |
| |
| [&](spv::Id& id) { if (idMap.find(id) != idMap.end()) id = idMap[id]; } |
| ); |
| |
| if (errorLatch) |
| return; |
| |
| // EXPERIMENTAL: Implicit output stores |
| fnLocalVars.clear(); |
| idMap.clear(); |
| |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| // Add inputs and uniforms to the map |
| if ((opCode == spv::OpVariable && asWordCount(start) == 4) && |
| (spv[start+3] == spv::StorageClassOutput)) |
| fnLocalVars.insert(asId(start+2)); |
| |
| if (opCode == spv::OpStore && fnLocalVars.count(asId(start+1)) > 0) { |
| idMap[asId(start+2)] = asId(start+1); |
| stripInst(start); |
| } |
| |
| return false; |
| }, |
| op_fn_nop); |
| |
| if (errorLatch) |
| return; |
| |
| process( |
| inst_fn_nop, |
| [&](spv::Id& id) { if (idMap.find(id) != idMap.end()) id = idMap[id]; } |
| ); |
| |
| if (errorLatch) |
| return; |
| |
| strip(); // strip out data we decided to eliminate |
| } |
| |
| // optimize loads and stores |
| void spirvbin_t::optLoadStore() |
| { |
| idset_t fnLocalVars; // candidates for removal (only locals) |
| idmap_t idMap; // Map of load result IDs to what they load |
| blockmap_t blockMap; // Map of IDs to blocks they first appear in |
| int blockNum = 0; // block count, to avoid crossing flow control |
| |
| // Find all the function local pointers stored at most once, and not via access chains |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| const int wordCount = asWordCount(start); |
| |
| // Count blocks, so we can avoid crossing flow control |
| if (isFlowCtrl(opCode)) |
| ++blockNum; |
| |
| // Add local variables to the map |
| if ((opCode == spv::OpVariable && spv[start+3] == spv::StorageClassFunction && asWordCount(start) == 4)) { |
| fnLocalVars.insert(asId(start+2)); |
| return true; |
| } |
| |
| // Ignore process vars referenced via access chain |
| if ((opCode == spv::OpAccessChain || opCode == spv::OpInBoundsAccessChain) && fnLocalVars.count(asId(start+3)) > 0) { |
| fnLocalVars.erase(asId(start+3)); |
| idMap.erase(asId(start+3)); |
| return true; |
| } |
| |
| if (opCode == spv::OpLoad && fnLocalVars.count(asId(start+3)) > 0) { |
| const spv::Id varId = asId(start+3); |
| |
| // Avoid loads before stores |
| if (idMap.find(varId) == idMap.end()) { |
| fnLocalVars.erase(varId); |
| idMap.erase(varId); |
| } |
| |
| // don't do for volatile references |
| if (wordCount > 4 && (spv[start+4] & spv::MemoryAccessVolatileMask)) { |
| fnLocalVars.erase(varId); |
| idMap.erase(varId); |
| } |
| |
| // Handle flow control |
| if (blockMap.find(varId) == blockMap.end()) { |
| blockMap[varId] = blockNum; // track block we found it in. |
| } else if (blockMap[varId] != blockNum) { |
| fnLocalVars.erase(varId); // Ignore if crosses flow control |
| idMap.erase(varId); |
| } |
| |
| return true; |
| } |
| |
| if (opCode == spv::OpStore && fnLocalVars.count(asId(start+1)) > 0) { |
| const spv::Id varId = asId(start+1); |
| |
| if (idMap.find(varId) == idMap.end()) { |
| idMap[varId] = asId(start+2); |
| } else { |
| // Remove if it has more than one store to the same pointer |
| fnLocalVars.erase(varId); |
| idMap.erase(varId); |
| } |
| |
| // don't do for volatile references |
| if (wordCount > 3 && (spv[start+3] & spv::MemoryAccessVolatileMask)) { |
| fnLocalVars.erase(asId(start+3)); |
| idMap.erase(asId(start+3)); |
| } |
| |
| // Handle flow control |
| if (blockMap.find(varId) == blockMap.end()) { |
| blockMap[varId] = blockNum; // track block we found it in. |
| } else if (blockMap[varId] != blockNum) { |
| fnLocalVars.erase(varId); // Ignore if crosses flow control |
| idMap.erase(varId); |
| } |
| |
| return true; |
| } |
| |
| return false; |
| }, |
| |
| // If local var id used anywhere else, don't eliminate |
| [&](spv::Id& id) { |
| if (fnLocalVars.count(id) > 0) { |
| fnLocalVars.erase(id); |
| idMap.erase(id); |
| } |
| } |
| ); |
| |
| if (errorLatch) |
| return; |
| |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| if (opCode == spv::OpLoad && fnLocalVars.count(asId(start+3)) > 0) |
| idMap[asId(start+2)] = idMap[asId(start+3)]; |
| return false; |
| }, |
| op_fn_nop); |
| |
| if (errorLatch) |
| return; |
| |
| // Chase replacements to their origins, in case there is a chain such as: |
| // 2 = store 1 |
| // 3 = load 2 |
| // 4 = store 3 |
| // 5 = load 4 |
| // We want to replace uses of 5 with 1. |
| for (const auto& idPair : idMap) { |
| spv::Id id = idPair.first; |
| while (idMap.find(id) != idMap.end()) // Chase to end of chain |
| id = idMap[id]; |
| |
| idMap[idPair.first] = id; // replace with final result |
| } |
| |
| // Remove the load/store/variables for the ones we've discovered |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| if ((opCode == spv::OpLoad && fnLocalVars.count(asId(start+3)) > 0) || |
| (opCode == spv::OpStore && fnLocalVars.count(asId(start+1)) > 0) || |
| (opCode == spv::OpVariable && fnLocalVars.count(asId(start+2)) > 0)) { |
| |
| stripInst(start); |
| return true; |
| } |
| |
| return false; |
| }, |
| |
| [&](spv::Id& id) { |
| if (idMap.find(id) != idMap.end()) id = idMap[id]; |
| } |
| ); |
| |
| if (errorLatch) |
| return; |
| |
| strip(); // strip out data we decided to eliminate |
| } |
| |
| // remove bodies of uncalled functions |
| void spirvbin_t::dceFuncs() |
| { |
| msg(3, 2, std::string("Removing Dead Functions: ")); |
| |
| // TODO: There are more efficient ways to do this. |
| bool changed = true; |
| |
| while (changed) { |
| changed = false; |
| |
| for (auto fn = fnPos.begin(); fn != fnPos.end(); ) { |
| if (fn->first == entryPoint) { // don't DCE away the entry point! |
| ++fn; |
| continue; |
| } |
| |
| const auto call_it = fnCalls.find(fn->first); |
| |
| if (call_it == fnCalls.end() || call_it->second == 0) { |
| changed = true; |
| stripRange.push_back(fn->second); |
| |
| // decrease counts of called functions |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| if (opCode == spv::Op::OpFunctionCall) { |
| const auto call_it = fnCalls.find(asId(start + 3)); |
| if (call_it != fnCalls.end()) { |
| if (--call_it->second <= 0) |
| fnCalls.erase(call_it); |
| } |
| } |
| |
| return true; |
| }, |
| op_fn_nop, |
| fn->second.first, |
| fn->second.second); |
| |
| if (errorLatch) |
| return; |
| |
| fn = fnPos.erase(fn); |
| } else ++fn; |
| } |
| } |
| } |
| |
| // remove unused function variables + decorations |
| void spirvbin_t::dceVars() |
| { |
| msg(3, 2, std::string("DCE Vars: ")); |
| |
| std::unordered_map<spv::Id, int> varUseCount; |
| |
| // Count function variable use |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| if (opCode == spv::OpVariable) { |
| ++varUseCount[asId(start+2)]; |
| return true; |
| } else if (opCode == spv::OpEntryPoint) { |
| const int wordCount = asWordCount(start); |
| for (int i = 4; i < wordCount; i++) { |
| ++varUseCount[asId(start+i)]; |
| } |
| return true; |
| } else |
| return false; |
| }, |
| |
| [&](spv::Id& id) { if (varUseCount[id]) ++varUseCount[id]; } |
| ); |
| |
| if (errorLatch) |
| return; |
| |
| // Remove single-use function variables + associated decorations and names |
| process( |
| [&](spv::Op opCode, unsigned start) { |
| spv::Id id = spv::NoResult; |
| if (opCode == spv::OpVariable) |
| id = asId(start+2); |
| if (opCode == spv::OpDecorate || opCode == spv::OpName) |
| id = asId(start+1); |
| |
| if (id != spv::NoResult && varUseCount[id] == 1) |
| stripInst(start); |
| |
| return true; |
| }, |
| op_fn_nop); |
| } |
| |
| // remove unused types |
| void spirvbin_t::dceTypes() |
| { |
| std::vector<bool> isType(bound(), false); |
| |
| // for speed, make O(1) way to get to type query (map is log(n)) |
| for (const auto typeStart : typeConstPos) |
| isType[asTypeConstId(typeStart)] = true; |
| |
| std::unordered_map<spv::Id, int> typeUseCount; |
| |
| // This is not the most efficient algorithm, but this is an offline tool, and |
| // it's easy to write this way. Can be improved opportunistically if needed. |
| bool changed = true; |
| while (changed) { |
| changed = false; |
| strip(); |
| typeUseCount.clear(); |
| |
| // Count total type usage |
| process(inst_fn_nop, |
| [&](spv::Id& id) { if (isType[id]) ++typeUseCount[id]; } |
| ); |
| |
| if (errorLatch) |
| return; |
| |
| // Remove single reference types |
| for (const auto typeStart : typeConstPos) { |
| const spv::Id typeId = asTypeConstId(typeStart); |
| if (typeUseCount[typeId] == 1) { |
| changed = true; |
| --typeUseCount[typeId]; |
| stripInst(typeStart); |
| } |
| } |
| |
| if (errorLatch) |
| return; |
| } |
| } |
| |
| #ifdef NOTDEF |
| bool spirvbin_t::matchType(const spirvbin_t::globaltypes_t& globalTypes, spv::Id lt, spv::Id gt) const |
| { |
| // Find the local type id "lt" and global type id "gt" |
| const auto lt_it = typeConstPosR.find(lt); |
| if (lt_it == typeConstPosR.end()) |
| return false; |
| |
| const auto typeStart = lt_it->second; |
| |
| // Search for entry in global table |
| const auto gtype = globalTypes.find(gt); |
| if (gtype == globalTypes.end()) |
| return false; |
| |
| const auto& gdata = gtype->second; |
| |
| // local wordcount and opcode |
| const int wordCount = asWordCount(typeStart); |
| const spv::Op opCode = asOpCode(typeStart); |
| |
| // no type match if opcodes don't match, or operand count doesn't match |
| if (opCode != opOpCode(gdata[0]) || wordCount != opWordCount(gdata[0])) |
| return false; |
| |
| const unsigned numOperands = wordCount - 2; // all types have a result |
| |
| const auto cmpIdRange = [&](range_t range) { |
| for (int x=range.first; x<std::min(range.second, wordCount); ++x) |
| if (!matchType(globalTypes, asId(typeStart+x), gdata[x])) |
| return false; |
| return true; |
| }; |
| |
| const auto cmpConst = [&]() { return cmpIdRange(constRange(opCode)); }; |
| const auto cmpSubType = [&]() { return cmpIdRange(typeRange(opCode)); }; |
| |
| // Compare literals in range [start,end) |
| const auto cmpLiteral = [&]() { |
| const auto range = literalRange(opCode); |
| return std::equal(spir.begin() + typeStart + range.first, |
| spir.begin() + typeStart + std::min(range.second, wordCount), |
| gdata.begin() + range.first); |
| }; |
| |
| assert(isTypeOp(opCode) || isConstOp(opCode)); |
| |
| switch (opCode) { |
| case spv::OpTypeOpaque: // TODO: disable until we compare the literal strings. |
| case spv::OpTypeQueue: return false; |
| case spv::OpTypeEvent: // fall through... |
| case spv::OpTypeDeviceEvent: // ... |
| case spv::OpTypeReserveId: return false; |
| // for samplers, we don't handle the optional parameters yet |
| case spv::OpTypeSampler: return cmpLiteral() && cmpConst() && cmpSubType() && wordCount == 8; |
| default: return cmpLiteral() && cmpConst() && cmpSubType(); |
| } |
| } |
| |
| // Look for an equivalent type in the globalTypes map |
| spv::Id spirvbin_t::findType(const spirvbin_t::globaltypes_t& globalTypes, spv::Id lt) const |
| { |
| // Try a recursive type match on each in turn, and return a match if we find one |
| for (const auto& gt : globalTypes) |
| if (matchType(globalTypes, lt, gt.first)) |
| return gt.first; |
| |
| return spv::NoType; |
| } |
| #endif // NOTDEF |
| |
| // Return start position in SPV of given Id. error if not found. |
| unsigned spirvbin_t::idPos(spv::Id id) const |
| { |
| const auto tid_it = idPosR.find(id); |
| if (tid_it == idPosR.end()) { |
| error("ID not found"); |
| return 0; |
| } |
| |
| return tid_it->second; |
| } |
| |
| // Hash types to canonical values. This can return ID collisions (it's a bit |
| // inevitable): it's up to the caller to handle that gracefully. |
| std::uint32_t spirvbin_t::hashType(unsigned typeStart) const |
| { |
| const unsigned wordCount = asWordCount(typeStart); |
| const spv::Op opCode = asOpCode(typeStart); |
| |
| switch (opCode) { |
| case spv::OpTypeVoid: return 0; |
| case spv::OpTypeBool: return 1; |
| case spv::OpTypeInt: return 3 + (spv[typeStart+3]); |
| case spv::OpTypeFloat: return 5; |
| case spv::OpTypeVector: |
| return 6 + hashType(idPos(spv[typeStart+2])) * (spv[typeStart+3] - 1); |
| case spv::OpTypeMatrix: |
| return 30 + hashType(idPos(spv[typeStart+2])) * (spv[typeStart+3] - 1); |
| case spv::OpTypeImage: |
| return 120 + hashType(idPos(spv[typeStart+2])) + |
| spv[typeStart+3] + // dimensionality |
| spv[typeStart+4] * 8 * 16 + // depth |
| spv[typeStart+5] * 4 * 16 + // arrayed |
| spv[typeStart+6] * 2 * 16 + // multisampled |
| spv[typeStart+7] * 1 * 16; // format |
| case spv::OpTypeSampler: |
| return 500; |
| case spv::OpTypeSampledImage: |
| return 502; |
| case spv::OpTypeArray: |
| return 501 + hashType(idPos(spv[typeStart+2])) * spv[typeStart+3]; |
| case spv::OpTypeRuntimeArray: |
| return 5000 + hashType(idPos(spv[typeStart+2])); |
| case spv::OpTypeStruct: |
| { |
| std::uint32_t hash = 10000; |
| for (unsigned w=2; w < wordCount; ++w) |
| hash += w * hashType(idPos(spv[typeStart+w])); |
| return hash; |
| } |
| |
| case spv::OpTypeOpaque: return 6000 + spv[typeStart+2]; |
| case spv::OpTypePointer: return 100000 + hashType(idPos(spv[typeStart+3])); |
| case spv::OpTypeFunction: |
| { |
| std::uint32_t hash = 200000; |
| for (unsigned w=2; w < wordCount; ++w) |
| hash += w * hashType(idPos(spv[typeStart+w])); |
| return hash; |
| } |
| |
| case spv::OpTypeEvent: return 300000; |
| case spv::OpTypeDeviceEvent: return 300001; |
| case spv::OpTypeReserveId: return 300002; |
| case spv::OpTypeQueue: return 300003; |
| case spv::OpTypePipe: return 300004; |
| |
| case spv::OpConstantNull: return 300005; |
| case spv::OpConstantSampler: return 300006; |
| |
| case spv::OpConstantTrue: return 300007; |
| case spv::OpConstantFalse: return 300008; |
| case spv::OpConstantComposite: |
| { |
| std::uint32_t hash = 300011 + hashType(idPos(spv[typeStart+1])); |
| for (unsigned w=3; w < wordCount; ++w) |
| hash += w * hashType(idPos(spv[typeStart+w])); |
| return hash; |
| } |
| case spv::OpConstant: |
| { |
| std::uint32_t hash = 400011 + hashType(idPos(spv[typeStart+1])); |
| for (unsigned w=3; w < wordCount; ++w) |
| hash += w * spv[typeStart+w]; |
| return hash; |
| } |
| |
| default: |
| error("unknown type opcode"); |
| return 0; |
| } |
| } |
| |
| void spirvbin_t::mapTypeConst() |
| { |
| globaltypes_t globalTypeMap; |
| |
| msg(3, 2, std::string("Remapping Consts & Types: ")); |
| |
| static const std::uint32_t softTypeIdLimit = 3011; // small prime. TODO: get from options |
| static const std::uint32_t firstMappedID = 8; // offset into ID space |
| |
| for (auto& typeStart : typeConstPos) { |
| const spv::Id resId = asTypeConstId(typeStart); |
| const std::uint32_t hashval = hashType(typeStart); |
| |
| if (errorLatch) |
| return; |
| |
| if (isOldIdUnmapped(resId)) { |
| localId(resId, nextUnusedId(hashval % softTypeIdLimit + firstMappedID)); |
| if (errorLatch) |
| return; |
| } |
| } |
| } |
| |
| // Strip a single binary by removing ranges given in stripRange |
| void spirvbin_t::strip() |
| { |
| if (stripRange.empty()) // nothing to do |
| return; |
| |
| // Sort strip ranges in order of traversal |
| std::sort(stripRange.begin(), stripRange.end()); |
| |
| // Allocate a new binary big enough to hold old binary |
| // We'll step this iterator through the strip ranges as we go through the binary |
| auto strip_it = stripRange.begin(); |
| |
| int strippedPos = 0; |
| for (unsigned word = 0; word < unsigned(spv.size()); ++word) { |
| if (strip_it != stripRange.end() && word >= strip_it->second) |
| ++strip_it; |
| |
| if (strip_it == stripRange.end() || word < strip_it->first || word >= strip_it->second) |
| spv[strippedPos++] = spv[word]; |
| } |
| |
| spv.resize(strippedPos); |
| stripRange.clear(); |
| |
| buildLocalMaps(); |
| } |
| |
| // Strip a single binary by removing ranges given in stripRange |
| void spirvbin_t::remap(std::uint32_t opts) |
| { |
| options = opts; |
| |
| // Set up opcode tables from SpvDoc |
| spv::Parameterize(); |
| |
| validate(); // validate header |
| buildLocalMaps(); // build ID maps |
| |
| msg(3, 4, std::string("ID bound: ") + std::to_string(bound())); |
| |
| if (options & STRIP) stripDebug(); |
| if (errorLatch) return; |
| |
| strip(); // strip out data we decided to eliminate |
| if (errorLatch) return; |
| |
| if (options & OPT_LOADSTORE) optLoadStore(); |
| if (errorLatch) return; |
| |
| if (options & OPT_FWD_LS) forwardLoadStores(); |
| if (errorLatch) return; |
| |
| if (options & DCE_FUNCS) dceFuncs(); |
| if (errorLatch) return; |
| |
| if (options & DCE_VARS) dceVars(); |
| if (errorLatch) return; |
| |
| if (options & DCE_TYPES) dceTypes(); |
| if (errorLatch) return; |
| |
| strip(); // strip out data we decided to eliminate |
| if (errorLatch) return; |
| |
| stripDeadRefs(); // remove references to things we DCEed |
| if (errorLatch) return; |
| |
| // after the last strip, we must clean any debug info referring to now-deleted data |
| |
| if (options & MAP_TYPES) mapTypeConst(); |
| if (errorLatch) return; |
| |
| if (options & MAP_NAMES) mapNames(); |
| if (errorLatch) return; |
| |
| if (options & MAP_FUNCS) mapFnBodies(); |
| if (errorLatch) return; |
| |
| if (options & MAP_ALL) { |
| mapRemainder(); // map any unmapped IDs |
| if (errorLatch) return; |
| |
| applyMap(); // Now remap each shader to the new IDs we've come up with |
| if (errorLatch) return; |
| } |
| } |
| |
| // remap from a memory image |
| void spirvbin_t::remap(std::vector<std::uint32_t>& in_spv, std::uint32_t opts) |
| { |
| spv.swap(in_spv); |
| remap(opts); |
| spv.swap(in_spv); |
| } |
| |
| } // namespace SPV |
| |
| #endif // defined (use_cpp11) |
| |
