| // |
| // Copyright (C) 2002-2005 3Dlabs Inc. Ltd. |
| // Copyright (C) 2012-2016 LunarG, Inc. |
| // Copyright (C) 2017 ARM Limited. |
| // Modifications Copyright (C) 2020 Advanced Micro Devices, Inc. All rights reserved. |
| // |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions |
| // are met: |
| // |
| // Redistributions of source code must retain the above copyright |
| // notice, this list of conditions and the following disclaimer. |
| // |
| // Redistributions in binary form must reproduce the above |
| // copyright notice, this list of conditions and the following |
| // disclaimer in the documentation and/or other materials provided |
| // with the distribution. |
| // |
| // Neither the name of 3Dlabs Inc. Ltd. nor the names of its |
| // contributors may be used to endorse or promote products derived |
| // from this software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| // FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| // COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| // INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| // BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| // LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| // CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| // LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| // ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| // POSSIBILITY OF SUCH DAMAGE. |
| // |
| |
| #if !defined(GLSLANG_WEB) && !defined(GLSLANG_ANGLE) |
| |
| #include "localintermediate.h" |
| #include "../Include/InfoSink.h" |
| |
| #ifdef _MSC_VER |
| #include <cfloat> |
| #else |
| #include <cmath> |
| #endif |
| #include <cstdint> |
| |
| namespace { |
| |
| bool IsInfinity(double x) { |
| #ifdef _MSC_VER |
| switch (_fpclass(x)) { |
| case _FPCLASS_NINF: |
| case _FPCLASS_PINF: |
| return true; |
| default: |
| return false; |
| } |
| #else |
| return std::isinf(x); |
| #endif |
| } |
| |
| bool IsNan(double x) { |
| #ifdef _MSC_VER |
| switch (_fpclass(x)) { |
| case _FPCLASS_SNAN: |
| case _FPCLASS_QNAN: |
| return true; |
| default: |
| return false; |
| } |
| #else |
| return std::isnan(x); |
| #endif |
| } |
| |
| } |
| |
| namespace glslang { |
| |
| // |
| // Two purposes: |
| // 1. Show an example of how to iterate tree. Functions can |
| // also directly call Traverse() on children themselves to |
| // have finer grained control over the process than shown here. |
| // See the last function for how to get started. |
| // 2. Print out a text based description of the tree. |
| // |
| |
| // |
| // Use this class to carry along data from node to node in |
| // the traversal |
| // |
| class TOutputTraverser : public TIntermTraverser { |
| public: |
| TOutputTraverser(TInfoSink& i) : infoSink(i), extraOutput(NoExtraOutput) { } |
| |
| enum EExtraOutput { |
| NoExtraOutput, |
| BinaryDoubleOutput |
| }; |
| void setDoubleOutput(EExtraOutput extra) { extraOutput = extra; } |
| |
| virtual bool visitBinary(TVisit, TIntermBinary* node); |
| virtual bool visitUnary(TVisit, TIntermUnary* node); |
| virtual bool visitAggregate(TVisit, TIntermAggregate* node); |
| virtual bool visitSelection(TVisit, TIntermSelection* node); |
| virtual void visitConstantUnion(TIntermConstantUnion* node); |
| virtual void visitSymbol(TIntermSymbol* node); |
| virtual bool visitLoop(TVisit, TIntermLoop* node); |
| virtual bool visitBranch(TVisit, TIntermBranch* node); |
| virtual bool visitSwitch(TVisit, TIntermSwitch* node); |
| |
| TInfoSink& infoSink; |
| protected: |
| TOutputTraverser(TOutputTraverser&); |
| TOutputTraverser& operator=(TOutputTraverser&); |
| |
| EExtraOutput extraOutput; |
| }; |
| |
| // |
| // Helper functions for printing, not part of traversing. |
| // |
| |
| static void OutputTreeText(TInfoSink& infoSink, const TIntermNode* node, const int depth) |
| { |
| int i; |
| |
| infoSink.debug << node->getLoc().string << ":"; |
| if (node->getLoc().line) |
| infoSink.debug << node->getLoc().line; |
| else |
| infoSink.debug << "? "; |
| |
| for (i = 0; i < depth; ++i) |
| infoSink.debug << " "; |
| } |
| |
| // |
| // The rest of the file are the traversal functions. The last one |
| // is the one that starts the traversal. |
| // |
| // Return true from interior nodes to have the external traversal |
| // continue on to children. If you process children yourself, |
| // return false. |
| // |
| |
| bool TOutputTraverser::visitBinary(TVisit /* visit */, TIntermBinary* node) |
| { |
| TInfoSink& out = infoSink; |
| |
| OutputTreeText(out, node, depth); |
| |
| switch (node->getOp()) { |
| case EOpAssign: out.debug << "move second child to first child"; break; |
| case EOpAddAssign: out.debug << "add second child into first child"; break; |
| case EOpSubAssign: out.debug << "subtract second child into first child"; break; |
| case EOpMulAssign: out.debug << "multiply second child into first child"; break; |
| case EOpVectorTimesMatrixAssign: out.debug << "matrix mult second child into first child"; break; |
| case EOpVectorTimesScalarAssign: out.debug << "vector scale second child into first child"; break; |
| case EOpMatrixTimesScalarAssign: out.debug << "matrix scale second child into first child"; break; |
| case EOpMatrixTimesMatrixAssign: out.debug << "matrix mult second child into first child"; break; |
| case EOpDivAssign: out.debug << "divide second child into first child"; break; |
| case EOpModAssign: out.debug << "mod second child into first child"; break; |
| case EOpAndAssign: out.debug << "and second child into first child"; break; |
| case EOpInclusiveOrAssign: out.debug << "or second child into first child"; break; |
| case EOpExclusiveOrAssign: out.debug << "exclusive or second child into first child"; break; |
| case EOpLeftShiftAssign: out.debug << "left shift second child into first child"; break; |
| case EOpRightShiftAssign: out.debug << "right shift second child into first child"; break; |
| |
| case EOpIndexDirect: out.debug << "direct index"; break; |
| case EOpIndexIndirect: out.debug << "indirect index"; break; |
| case EOpIndexDirectStruct: |
| { |
| bool reference = node->getLeft()->getType().isReference(); |
| const TTypeList *members = reference ? node->getLeft()->getType().getReferentType()->getStruct() : node->getLeft()->getType().getStruct(); |
| out.debug << (*members)[node->getRight()->getAsConstantUnion()->getConstArray()[0].getIConst()].type->getFieldName(); |
| out.debug << ": direct index for structure"; break; |
| } |
| case EOpVectorSwizzle: out.debug << "vector swizzle"; break; |
| case EOpMatrixSwizzle: out.debug << "matrix swizzle"; break; |
| |
| case EOpAdd: out.debug << "add"; break; |
| case EOpSub: out.debug << "subtract"; break; |
| case EOpMul: out.debug << "component-wise multiply"; break; |
| case EOpDiv: out.debug << "divide"; break; |
| case EOpMod: out.debug << "mod"; break; |
| case EOpRightShift: out.debug << "right-shift"; break; |
| case EOpLeftShift: out.debug << "left-shift"; break; |
| case EOpAnd: out.debug << "bitwise and"; break; |
| case EOpInclusiveOr: out.debug << "inclusive-or"; break; |
| case EOpExclusiveOr: out.debug << "exclusive-or"; break; |
| case EOpEqual: out.debug << "Compare Equal"; break; |
| case EOpNotEqual: out.debug << "Compare Not Equal"; break; |
| case EOpLessThan: out.debug << "Compare Less Than"; break; |
| case EOpGreaterThan: out.debug << "Compare Greater Than"; break; |
| case EOpLessThanEqual: out.debug << "Compare Less Than or Equal"; break; |
| case EOpGreaterThanEqual: out.debug << "Compare Greater Than or Equal"; break; |
| case EOpVectorEqual: out.debug << "Equal"; break; |
| case EOpVectorNotEqual: out.debug << "NotEqual"; break; |
| |
| case EOpVectorTimesScalar: out.debug << "vector-scale"; break; |
| case EOpVectorTimesMatrix: out.debug << "vector-times-matrix"; break; |
| case EOpMatrixTimesVector: out.debug << "matrix-times-vector"; break; |
| case EOpMatrixTimesScalar: out.debug << "matrix-scale"; break; |
| case EOpMatrixTimesMatrix: out.debug << "matrix-multiply"; break; |
| |
| case EOpLogicalOr: out.debug << "logical-or"; break; |
| case EOpLogicalXor: out.debug << "logical-xor"; break; |
| case EOpLogicalAnd: out.debug << "logical-and"; break; |
| |
| case EOpAbsDifference: out.debug << "absoluteDifference"; break; |
| case EOpAddSaturate: out.debug << "addSaturate"; break; |
| case EOpSubSaturate: out.debug << "subtractSaturate"; break; |
| case EOpAverage: out.debug << "average"; break; |
| case EOpAverageRounded: out.debug << "averageRounded"; break; |
| case EOpMul32x16: out.debug << "multiply32x16"; break; |
| |
| default: out.debug << "<unknown op>"; |
| } |
| |
| out.debug << " (" << node->getCompleteString() << ")"; |
| |
| out.debug << "\n"; |
| |
| return true; |
| } |
| |
| bool TOutputTraverser::visitUnary(TVisit /* visit */, TIntermUnary* node) |
| { |
| TInfoSink& out = infoSink; |
| |
| OutputTreeText(out, node, depth); |
| |
| switch (node->getOp()) { |
| case EOpNegative: out.debug << "Negate value"; break; |
| case EOpVectorLogicalNot: |
| case EOpLogicalNot: out.debug << "Negate conditional"; break; |
| case EOpBitwiseNot: out.debug << "Bitwise not"; break; |
| |
| case EOpPostIncrement: out.debug << "Post-Increment"; break; |
| case EOpPostDecrement: out.debug << "Post-Decrement"; break; |
| case EOpPreIncrement: out.debug << "Pre-Increment"; break; |
| case EOpPreDecrement: out.debug << "Pre-Decrement"; break; |
| case EOpCopyObject: out.debug << "copy object"; break; |
| |
| // * -> bool |
| case EOpConvInt8ToBool: out.debug << "Convert int8_t to bool"; break; |
| case EOpConvUint8ToBool: out.debug << "Convert uint8_t to bool"; break; |
| case EOpConvInt16ToBool: out.debug << "Convert int16_t to bool"; break; |
| case EOpConvUint16ToBool: out.debug << "Convert uint16_t to bool";break; |
| case EOpConvIntToBool: out.debug << "Convert int to bool"; break; |
| case EOpConvUintToBool: out.debug << "Convert uint to bool"; break; |
| case EOpConvInt64ToBool: out.debug << "Convert int64 to bool"; break; |
| case EOpConvUint64ToBool: out.debug << "Convert uint64 to bool"; break; |
| case EOpConvFloat16ToBool: out.debug << "Convert float16_t to bool"; break; |
| case EOpConvFloatToBool: out.debug << "Convert float to bool"; break; |
| case EOpConvDoubleToBool: out.debug << "Convert double to bool"; break; |
| |
| // bool -> * |
| case EOpConvBoolToInt8: out.debug << "Convert bool to int8_t"; break; |
| case EOpConvBoolToUint8: out.debug << "Convert bool to uint8_t"; break; |
| case EOpConvBoolToInt16: out.debug << "Convert bool to in16t_t"; break; |
| case EOpConvBoolToUint16: out.debug << "Convert bool to uint16_t";break; |
| case EOpConvBoolToInt: out.debug << "Convert bool to int" ; break; |
| case EOpConvBoolToUint: out.debug << "Convert bool to uint"; break; |
| case EOpConvBoolToInt64: out.debug << "Convert bool to int64"; break; |
| case EOpConvBoolToUint64: out.debug << "Convert bool to uint64";break; |
| case EOpConvBoolToFloat16: out.debug << "Convert bool to float16_t"; break; |
| case EOpConvBoolToFloat: out.debug << "Convert bool to float"; break; |
| case EOpConvBoolToDouble: out.debug << "Convert bool to double"; break; |
| |
| // int8_t -> (u)int* |
| case EOpConvInt8ToInt16: out.debug << "Convert int8_t to int16_t";break; |
| case EOpConvInt8ToInt: out.debug << "Convert int8_t to int"; break; |
| case EOpConvInt8ToInt64: out.debug << "Convert int8_t to int64"; break; |
| case EOpConvInt8ToUint8: out.debug << "Convert int8_t to uint8_t";break; |
| case EOpConvInt8ToUint16: out.debug << "Convert int8_t to uint16_t";break; |
| case EOpConvInt8ToUint: out.debug << "Convert int8_t to uint"; break; |
| case EOpConvInt8ToUint64: out.debug << "Convert int8_t to uint64"; break; |
| |
| // uint8_t -> (u)int* |
| case EOpConvUint8ToInt8: out.debug << "Convert uint8_t to int8_t";break; |
| case EOpConvUint8ToInt16: out.debug << "Convert uint8_t to int16_t";break; |
| case EOpConvUint8ToInt: out.debug << "Convert uint8_t to int"; break; |
| case EOpConvUint8ToInt64: out.debug << "Convert uint8_t to int64"; break; |
| case EOpConvUint8ToUint16: out.debug << "Convert uint8_t to uint16_t";break; |
| case EOpConvUint8ToUint: out.debug << "Convert uint8_t to uint"; break; |
| case EOpConvUint8ToUint64: out.debug << "Convert uint8_t to uint64"; break; |
| |
| // int8_t -> float* |
| case EOpConvInt8ToFloat16: out.debug << "Convert int8_t to float16_t";break; |
| case EOpConvInt8ToFloat: out.debug << "Convert int8_t to float"; break; |
| case EOpConvInt8ToDouble: out.debug << "Convert int8_t to double"; break; |
| |
| // uint8_t -> float* |
| case EOpConvUint8ToFloat16: out.debug << "Convert uint8_t to float16_t";break; |
| case EOpConvUint8ToFloat: out.debug << "Convert uint8_t to float"; break; |
| case EOpConvUint8ToDouble: out.debug << "Convert uint8_t to double"; break; |
| |
| // int16_t -> (u)int* |
| case EOpConvInt16ToInt8: out.debug << "Convert int16_t to int8_t";break; |
| case EOpConvInt16ToInt: out.debug << "Convert int16_t to int"; break; |
| case EOpConvInt16ToInt64: out.debug << "Convert int16_t to int64"; break; |
| case EOpConvInt16ToUint8: out.debug << "Convert int16_t to uint8_t";break; |
| case EOpConvInt16ToUint16: out.debug << "Convert int16_t to uint16_t";break; |
| case EOpConvInt16ToUint: out.debug << "Convert int16_t to uint"; break; |
| case EOpConvInt16ToUint64: out.debug << "Convert int16_t to uint64"; break; |
| |
| // int16_t -> float* |
| case EOpConvInt16ToFloat16: out.debug << "Convert int16_t to float16_t";break; |
| case EOpConvInt16ToFloat: out.debug << "Convert int16_t to float"; break; |
| case EOpConvInt16ToDouble: out.debug << "Convert int16_t to double"; break; |
| |
| // uint16_t -> (u)int* |
| case EOpConvUint16ToInt8: out.debug << "Convert uint16_t to int8_t";break; |
| case EOpConvUint16ToInt16: out.debug << "Convert uint16_t to int16_t";break; |
| case EOpConvUint16ToInt: out.debug << "Convert uint16_t to int"; break; |
| case EOpConvUint16ToInt64: out.debug << "Convert uint16_t to int64"; break; |
| case EOpConvUint16ToUint8: out.debug << "Convert uint16_t to uint8_t";break; |
| case EOpConvUint16ToUint: out.debug << "Convert uint16_t to uint"; break; |
| case EOpConvUint16ToUint64: out.debug << "Convert uint16_t to uint64"; break; |
| |
| // uint16_t -> float* |
| case EOpConvUint16ToFloat16: out.debug << "Convert uint16_t to float16_t";break; |
| case EOpConvUint16ToFloat: out.debug << "Convert uint16_t to float"; break; |
| case EOpConvUint16ToDouble: out.debug << "Convert uint16_t to double"; break; |
| |
| // int32_t -> (u)int* |
| case EOpConvIntToInt8: out.debug << "Convert int to int8_t";break; |
| case EOpConvIntToInt16: out.debug << "Convert int to int16_t";break; |
| case EOpConvIntToInt64: out.debug << "Convert int to int64"; break; |
| case EOpConvIntToUint8: out.debug << "Convert int to uint8_t";break; |
| case EOpConvIntToUint16: out.debug << "Convert int to uint16_t";break; |
| case EOpConvIntToUint: out.debug << "Convert int to uint"; break; |
| case EOpConvIntToUint64: out.debug << "Convert int to uint64"; break; |
| |
| // int32_t -> float* |
| case EOpConvIntToFloat16: out.debug << "Convert int to float16_t";break; |
| case EOpConvIntToFloat: out.debug << "Convert int to float"; break; |
| case EOpConvIntToDouble: out.debug << "Convert int to double"; break; |
| |
| // uint32_t -> (u)int* |
| case EOpConvUintToInt8: out.debug << "Convert uint to int8_t";break; |
| case EOpConvUintToInt16: out.debug << "Convert uint to int16_t";break; |
| case EOpConvUintToInt: out.debug << "Convert uint to int";break; |
| case EOpConvUintToInt64: out.debug << "Convert uint to int64"; break; |
| case EOpConvUintToUint8: out.debug << "Convert uint to uint8_t";break; |
| case EOpConvUintToUint16: out.debug << "Convert uint to uint16_t";break; |
| case EOpConvUintToUint64: out.debug << "Convert uint to uint64"; break; |
| |
| // uint32_t -> float* |
| case EOpConvUintToFloat16: out.debug << "Convert uint to float16_t";break; |
| case EOpConvUintToFloat: out.debug << "Convert uint to float"; break; |
| case EOpConvUintToDouble: out.debug << "Convert uint to double"; break; |
| |
| // int64 -> (u)int* |
| case EOpConvInt64ToInt8: out.debug << "Convert int64 to int8_t"; break; |
| case EOpConvInt64ToInt16: out.debug << "Convert int64 to int16_t"; break; |
| case EOpConvInt64ToInt: out.debug << "Convert int64 to int"; break; |
| case EOpConvInt64ToUint8: out.debug << "Convert int64 to uint8_t";break; |
| case EOpConvInt64ToUint16: out.debug << "Convert int64 to uint16_t";break; |
| case EOpConvInt64ToUint: out.debug << "Convert int64 to uint"; break; |
| case EOpConvInt64ToUint64: out.debug << "Convert int64 to uint64"; break; |
| |
| // int64 -> float* |
| case EOpConvInt64ToFloat16: out.debug << "Convert int64 to float16_t";break; |
| case EOpConvInt64ToFloat: out.debug << "Convert int64 to float"; break; |
| case EOpConvInt64ToDouble: out.debug << "Convert int64 to double"; break; |
| |
| // uint64 -> (u)int* |
| case EOpConvUint64ToInt8: out.debug << "Convert uint64 to int8_t";break; |
| case EOpConvUint64ToInt16: out.debug << "Convert uint64 to int16_t";break; |
| case EOpConvUint64ToInt: out.debug << "Convert uint64 to int"; break; |
| case EOpConvUint64ToInt64: out.debug << "Convert uint64 to int64"; break; |
| case EOpConvUint64ToUint8: out.debug << "Convert uint64 to uint8_t";break; |
| case EOpConvUint64ToUint16: out.debug << "Convert uint64 to uint16"; break; |
| case EOpConvUint64ToUint: out.debug << "Convert uint64 to uint"; break; |
| |
| // uint64 -> float* |
| case EOpConvUint64ToFloat16: out.debug << "Convert uint64 to float16_t";break; |
| case EOpConvUint64ToFloat: out.debug << "Convert uint64 to float"; break; |
| case EOpConvUint64ToDouble: out.debug << "Convert uint64 to double"; break; |
| |
| // float16_t -> int* |
| case EOpConvFloat16ToInt8: out.debug << "Convert float16_t to int8_t"; break; |
| case EOpConvFloat16ToInt16: out.debug << "Convert float16_t to int16_t"; break; |
| case EOpConvFloat16ToInt: out.debug << "Convert float16_t to int"; break; |
| case EOpConvFloat16ToInt64: out.debug << "Convert float16_t to int64"; break; |
| |
| // float16_t -> uint* |
| case EOpConvFloat16ToUint8: out.debug << "Convert float16_t to uint8_t"; break; |
| case EOpConvFloat16ToUint16: out.debug << "Convert float16_t to uint16_t"; break; |
| case EOpConvFloat16ToUint: out.debug << "Convert float16_t to uint"; break; |
| case EOpConvFloat16ToUint64: out.debug << "Convert float16_t to uint64"; break; |
| |
| // float16_t -> float* |
| case EOpConvFloat16ToFloat: out.debug << "Convert float16_t to float"; break; |
| case EOpConvFloat16ToDouble: out.debug << "Convert float16_t to double"; break; |
| |
| // float32 -> float* |
| case EOpConvFloatToFloat16: out.debug << "Convert float to float16_t"; break; |
| case EOpConvFloatToDouble: out.debug << "Convert float to double"; break; |
| |
| // float32_t -> int* |
| case EOpConvFloatToInt8: out.debug << "Convert float to int8_t"; break; |
| case EOpConvFloatToInt16: out.debug << "Convert float to int16_t"; break; |
| case EOpConvFloatToInt: out.debug << "Convert float to int"; break; |
| case EOpConvFloatToInt64: out.debug << "Convert float to int64"; break; |
| |
| // float32_t -> uint* |
| case EOpConvFloatToUint8: out.debug << "Convert float to uint8_t"; break; |
| case EOpConvFloatToUint16: out.debug << "Convert float to uint16_t"; break; |
| case EOpConvFloatToUint: out.debug << "Convert float to uint"; break; |
| case EOpConvFloatToUint64: out.debug << "Convert float to uint64"; break; |
| |
| // double -> float* |
| case EOpConvDoubleToFloat16: out.debug << "Convert double to float16_t"; break; |
| case EOpConvDoubleToFloat: out.debug << "Convert double to float"; break; |
| |
| // double -> int* |
| case EOpConvDoubleToInt8: out.debug << "Convert double to int8_t"; break; |
| case EOpConvDoubleToInt16: out.debug << "Convert double to int16_t"; break; |
| case EOpConvDoubleToInt: out.debug << "Convert double to int"; break; |
| case EOpConvDoubleToInt64: out.debug << "Convert double to int64"; break; |
| |
| // float32_t -> uint* |
| case EOpConvDoubleToUint8: out.debug << "Convert double to uint8_t"; break; |
| case EOpConvDoubleToUint16: out.debug << "Convert double to uint16_t"; break; |
| case EOpConvDoubleToUint: out.debug << "Convert double to uint"; break; |
| case EOpConvDoubleToUint64: out.debug << "Convert double to uint64"; break; |
| |
| case EOpConvUint64ToPtr: out.debug << "Convert uint64_t to pointer"; break; |
| case EOpConvPtrToUint64: out.debug << "Convert pointer to uint64_t"; break; |
| |
| case EOpRadians: out.debug << "radians"; break; |
| case EOpDegrees: out.debug << "degrees"; break; |
| case EOpSin: out.debug << "sine"; break; |
| case EOpCos: out.debug << "cosine"; break; |
| case EOpTan: out.debug << "tangent"; break; |
| case EOpAsin: out.debug << "arc sine"; break; |
| case EOpAcos: out.debug << "arc cosine"; break; |
| case EOpAtan: out.debug << "arc tangent"; break; |
| case EOpSinh: out.debug << "hyp. sine"; break; |
| case EOpCosh: out.debug << "hyp. cosine"; break; |
| case EOpTanh: out.debug << "hyp. tangent"; break; |
| case EOpAsinh: out.debug << "arc hyp. sine"; break; |
| case EOpAcosh: out.debug << "arc hyp. cosine"; break; |
| case EOpAtanh: out.debug << "arc hyp. tangent"; break; |
| |
| case EOpExp: out.debug << "exp"; break; |
| case EOpLog: out.debug << "log"; break; |
| case EOpExp2: out.debug << "exp2"; break; |
| case EOpLog2: out.debug << "log2"; break; |
| case EOpSqrt: out.debug << "sqrt"; break; |
| case EOpInverseSqrt: out.debug << "inverse sqrt"; break; |
| |
| case EOpAbs: out.debug << "Absolute value"; break; |
| case EOpSign: out.debug << "Sign"; break; |
| case EOpFloor: out.debug << "Floor"; break; |
| case EOpTrunc: out.debug << "trunc"; break; |
| case EOpRound: out.debug << "round"; break; |
| case EOpRoundEven: out.debug << "roundEven"; break; |
| case EOpCeil: out.debug << "Ceiling"; break; |
| case EOpFract: out.debug << "Fraction"; break; |
| |
| case EOpIsNan: out.debug << "isnan"; break; |
| case EOpIsInf: out.debug << "isinf"; break; |
| |
| case EOpFloatBitsToInt: out.debug << "floatBitsToInt"; break; |
| case EOpFloatBitsToUint:out.debug << "floatBitsToUint"; break; |
| case EOpIntBitsToFloat: out.debug << "intBitsToFloat"; break; |
| case EOpUintBitsToFloat:out.debug << "uintBitsToFloat"; break; |
| case EOpDoubleBitsToInt64: out.debug << "doubleBitsToInt64"; break; |
| case EOpDoubleBitsToUint64: out.debug << "doubleBitsToUint64"; break; |
| case EOpInt64BitsToDouble: out.debug << "int64BitsToDouble"; break; |
| case EOpUint64BitsToDouble: out.debug << "uint64BitsToDouble"; break; |
| case EOpFloat16BitsToInt16: out.debug << "float16BitsToInt16"; break; |
| case EOpFloat16BitsToUint16: out.debug << "float16BitsToUint16"; break; |
| case EOpInt16BitsToFloat16: out.debug << "int16BitsToFloat16"; break; |
| case EOpUint16BitsToFloat16: out.debug << "uint16BitsToFloat16"; break; |
| |
| case EOpPackSnorm2x16: out.debug << "packSnorm2x16"; break; |
| case EOpUnpackSnorm2x16:out.debug << "unpackSnorm2x16"; break; |
| case EOpPackUnorm2x16: out.debug << "packUnorm2x16"; break; |
| case EOpUnpackUnorm2x16:out.debug << "unpackUnorm2x16"; break; |
| case EOpPackHalf2x16: out.debug << "packHalf2x16"; break; |
| case EOpUnpackHalf2x16: out.debug << "unpackHalf2x16"; break; |
| case EOpPack16: out.debug << "pack16"; break; |
| case EOpPack32: out.debug << "pack32"; break; |
| case EOpPack64: out.debug << "pack64"; break; |
| case EOpUnpack32: out.debug << "unpack32"; break; |
| case EOpUnpack16: out.debug << "unpack16"; break; |
| case EOpUnpack8: out.debug << "unpack8"; break; |
| |
| case EOpPackSnorm4x8: out.debug << "PackSnorm4x8"; break; |
| case EOpUnpackSnorm4x8: out.debug << "UnpackSnorm4x8"; break; |
| case EOpPackUnorm4x8: out.debug << "PackUnorm4x8"; break; |
| case EOpUnpackUnorm4x8: out.debug << "UnpackUnorm4x8"; break; |
| case EOpPackDouble2x32: out.debug << "PackDouble2x32"; break; |
| case EOpUnpackDouble2x32: out.debug << "UnpackDouble2x32"; break; |
| |
| case EOpPackInt2x32: out.debug << "packInt2x32"; break; |
| case EOpUnpackInt2x32: out.debug << "unpackInt2x32"; break; |
| case EOpPackUint2x32: out.debug << "packUint2x32"; break; |
| case EOpUnpackUint2x32: out.debug << "unpackUint2x32"; break; |
| |
| case EOpPackInt2x16: out.debug << "packInt2x16"; break; |
| case EOpUnpackInt2x16: out.debug << "unpackInt2x16"; break; |
| case EOpPackUint2x16: out.debug << "packUint2x16"; break; |
| case EOpUnpackUint2x16: out.debug << "unpackUint2x16"; break; |
| |
| case EOpPackInt4x16: out.debug << "packInt4x16"; break; |
| case EOpUnpackInt4x16: out.debug << "unpackInt4x16"; break; |
| case EOpPackUint4x16: out.debug << "packUint4x16"; break; |
| case EOpUnpackUint4x16: out.debug << "unpackUint4x16"; break; |
| case EOpPackFloat2x16: out.debug << "packFloat2x16"; break; |
| case EOpUnpackFloat2x16: out.debug << "unpackFloat2x16"; break; |
| |
| case EOpLength: out.debug << "length"; break; |
| case EOpNormalize: out.debug << "normalize"; break; |
| case EOpDPdx: out.debug << "dPdx"; break; |
| case EOpDPdy: out.debug << "dPdy"; break; |
| case EOpFwidth: out.debug << "fwidth"; break; |
| case EOpDPdxFine: out.debug << "dPdxFine"; break; |
| case EOpDPdyFine: out.debug << "dPdyFine"; break; |
| case EOpFwidthFine: out.debug << "fwidthFine"; break; |
| case EOpDPdxCoarse: out.debug << "dPdxCoarse"; break; |
| case EOpDPdyCoarse: out.debug << "dPdyCoarse"; break; |
| case EOpFwidthCoarse: out.debug << "fwidthCoarse"; break; |
| |
| case EOpInterpolateAtCentroid: out.debug << "interpolateAtCentroid"; break; |
| |
| case EOpDeterminant: out.debug << "determinant"; break; |
| case EOpMatrixInverse: out.debug << "inverse"; break; |
| case EOpTranspose: out.debug << "transpose"; break; |
| |
| case EOpAny: out.debug << "any"; break; |
| case EOpAll: out.debug << "all"; break; |
| |
| case EOpArrayLength: out.debug << "array length"; break; |
| |
| case EOpEmitStreamVertex: out.debug << "EmitStreamVertex"; break; |
| case EOpEndStreamPrimitive: out.debug << "EndStreamPrimitive"; break; |
| |
| case EOpAtomicCounterIncrement: out.debug << "AtomicCounterIncrement";break; |
| case EOpAtomicCounterDecrement: out.debug << "AtomicCounterDecrement";break; |
| case EOpAtomicCounter: out.debug << "AtomicCounter"; break; |
| |
| case EOpTextureQuerySize: out.debug << "textureSize"; break; |
| case EOpTextureQueryLod: out.debug << "textureQueryLod"; break; |
| case EOpTextureQueryLevels: out.debug << "textureQueryLevels"; break; |
| case EOpTextureQuerySamples: out.debug << "textureSamples"; break; |
| case EOpImageQuerySize: out.debug << "imageQuerySize"; break; |
| case EOpImageQuerySamples: out.debug << "imageQuerySamples"; break; |
| case EOpImageLoad: out.debug << "imageLoad"; break; |
| |
| case EOpBitFieldReverse: out.debug << "bitFieldReverse"; break; |
| case EOpBitCount: out.debug << "bitCount"; break; |
| case EOpFindLSB: out.debug << "findLSB"; break; |
| case EOpFindMSB: out.debug << "findMSB"; break; |
| |
| case EOpCountLeadingZeros: out.debug << "countLeadingZeros"; break; |
| case EOpCountTrailingZeros: out.debug << "countTrailingZeros"; break; |
| |
| case EOpNoise: out.debug << "noise"; break; |
| |
| case EOpBallot: out.debug << "ballot"; break; |
| case EOpReadFirstInvocation: out.debug << "readFirstInvocation"; break; |
| |
| case EOpAnyInvocation: out.debug << "anyInvocation"; break; |
| case EOpAllInvocations: out.debug << "allInvocations"; break; |
| case EOpAllInvocationsEqual: out.debug << "allInvocationsEqual"; break; |
| |
| case EOpSubgroupElect: out.debug << "subgroupElect"; break; |
| case EOpSubgroupAll: out.debug << "subgroupAll"; break; |
| case EOpSubgroupAny: out.debug << "subgroupAny"; break; |
| case EOpSubgroupAllEqual: out.debug << "subgroupAllEqual"; break; |
| case EOpSubgroupBroadcast: out.debug << "subgroupBroadcast"; break; |
| case EOpSubgroupBroadcastFirst: out.debug << "subgroupBroadcastFirst"; break; |
| case EOpSubgroupBallot: out.debug << "subgroupBallot"; break; |
| case EOpSubgroupInverseBallot: out.debug << "subgroupInverseBallot"; break; |
| case EOpSubgroupBallotBitExtract: out.debug << "subgroupBallotBitExtract"; break; |
| case EOpSubgroupBallotBitCount: out.debug << "subgroupBallotBitCount"; break; |
| case EOpSubgroupBallotInclusiveBitCount: out.debug << "subgroupBallotInclusiveBitCount"; break; |
| case EOpSubgroupBallotExclusiveBitCount: out.debug << "subgroupBallotExclusiveBitCount"; break; |
| case EOpSubgroupBallotFindLSB: out.debug << "subgroupBallotFindLSB"; break; |
| case EOpSubgroupBallotFindMSB: out.debug << "subgroupBallotFindMSB"; break; |
| case EOpSubgroupShuffle: out.debug << "subgroupShuffle"; break; |
| case EOpSubgroupShuffleXor: out.debug << "subgroupShuffleXor"; break; |
| case EOpSubgroupShuffleUp: out.debug << "subgroupShuffleUp"; break; |
| case EOpSubgroupShuffleDown: out.debug << "subgroupShuffleDown"; break; |
| case EOpSubgroupAdd: out.debug << "subgroupAdd"; break; |
| case EOpSubgroupMul: out.debug << "subgroupMul"; break; |
| case EOpSubgroupMin: out.debug << "subgroupMin"; break; |
| case EOpSubgroupMax: out.debug << "subgroupMax"; break; |
| case EOpSubgroupAnd: out.debug << "subgroupAnd"; break; |
| case EOpSubgroupOr: out.debug << "subgroupOr"; break; |
| case EOpSubgroupXor: out.debug << "subgroupXor"; break; |
| case EOpSubgroupInclusiveAdd: out.debug << "subgroupInclusiveAdd"; break; |
| case EOpSubgroupInclusiveMul: out.debug << "subgroupInclusiveMul"; break; |
| case EOpSubgroupInclusiveMin: out.debug << "subgroupInclusiveMin"; break; |
| case EOpSubgroupInclusiveMax: out.debug << "subgroupInclusiveMax"; break; |
| case EOpSubgroupInclusiveAnd: out.debug << "subgroupInclusiveAnd"; break; |
| case EOpSubgroupInclusiveOr: out.debug << "subgroupInclusiveOr"; break; |
| case EOpSubgroupInclusiveXor: out.debug << "subgroupInclusiveXor"; break; |
| case EOpSubgroupExclusiveAdd: out.debug << "subgroupExclusiveAdd"; break; |
| case EOpSubgroupExclusiveMul: out.debug << "subgroupExclusiveMul"; break; |
| case EOpSubgroupExclusiveMin: out.debug << "subgroupExclusiveMin"; break; |
| case EOpSubgroupExclusiveMax: out.debug << "subgroupExclusiveMax"; break; |
| case EOpSubgroupExclusiveAnd: out.debug << "subgroupExclusiveAnd"; break; |
| case EOpSubgroupExclusiveOr: out.debug << "subgroupExclusiveOr"; break; |
| case EOpSubgroupExclusiveXor: out.debug << "subgroupExclusiveXor"; break; |
| case EOpSubgroupClusteredAdd: out.debug << "subgroupClusteredAdd"; break; |
| case EOpSubgroupClusteredMul: out.debug << "subgroupClusteredMul"; break; |
| case EOpSubgroupClusteredMin: out.debug << "subgroupClusteredMin"; break; |
| case EOpSubgroupClusteredMax: out.debug << "subgroupClusteredMax"; break; |
| case EOpSubgroupClusteredAnd: out.debug << "subgroupClusteredAnd"; break; |
| case EOpSubgroupClusteredOr: out.debug << "subgroupClusteredOr"; break; |
| case EOpSubgroupClusteredXor: out.debug << "subgroupClusteredXor"; break; |
| case EOpSubgroupQuadBroadcast: out.debug << "subgroupQuadBroadcast"; break; |
| case EOpSubgroupQuadSwapHorizontal: out.debug << "subgroupQuadSwapHorizontal"; break; |
| case EOpSubgroupQuadSwapVertical: out.debug << "subgroupQuadSwapVertical"; break; |
| case EOpSubgroupQuadSwapDiagonal: out.debug << "subgroupQuadSwapDiagonal"; break; |
| |
| case EOpSubgroupPartition: out.debug << "subgroupPartitionNV"; break; |
| case EOpSubgroupPartitionedAdd: out.debug << "subgroupPartitionedAddNV"; break; |
| case EOpSubgroupPartitionedMul: out.debug << "subgroupPartitionedMulNV"; break; |
| case EOpSubgroupPartitionedMin: out.debug << "subgroupPartitionedMinNV"; break; |
| case EOpSubgroupPartitionedMax: out.debug << "subgroupPartitionedMaxNV"; break; |
| case EOpSubgroupPartitionedAnd: out.debug << "subgroupPartitionedAndNV"; break; |
| case EOpSubgroupPartitionedOr: out.debug << "subgroupPartitionedOrNV"; break; |
| case EOpSubgroupPartitionedXor: out.debug << "subgroupPartitionedXorNV"; break; |
| case EOpSubgroupPartitionedInclusiveAdd: out.debug << "subgroupPartitionedInclusiveAddNV"; break; |
| case EOpSubgroupPartitionedInclusiveMul: out.debug << "subgroupPartitionedInclusiveMulNV"; break; |
| case EOpSubgroupPartitionedInclusiveMin: out.debug << "subgroupPartitionedInclusiveMinNV"; break; |
| case EOpSubgroupPartitionedInclusiveMax: out.debug << "subgroupPartitionedInclusiveMaxNV"; break; |
| case EOpSubgroupPartitionedInclusiveAnd: out.debug << "subgroupPartitionedInclusiveAndNV"; break; |
| case EOpSubgroupPartitionedInclusiveOr: out.debug << "subgroupPartitionedInclusiveOrNV"; break; |
| case EOpSubgroupPartitionedInclusiveXor: out.debug << "subgroupPartitionedInclusiveXorNV"; break; |
| case EOpSubgroupPartitionedExclusiveAdd: out.debug << "subgroupPartitionedExclusiveAddNV"; break; |
| case EOpSubgroupPartitionedExclusiveMul: out.debug << "subgroupPartitionedExclusiveMulNV"; break; |
| case EOpSubgroupPartitionedExclusiveMin: out.debug << "subgroupPartitionedExclusiveMinNV"; break; |
| case EOpSubgroupPartitionedExclusiveMax: out.debug << "subgroupPartitionedExclusiveMaxNV"; break; |
| case EOpSubgroupPartitionedExclusiveAnd: out.debug << "subgroupPartitionedExclusiveAndNV"; break; |
| case EOpSubgroupPartitionedExclusiveOr: out.debug << "subgroupPartitionedExclusiveOrNV"; break; |
| case EOpSubgroupPartitionedExclusiveXor: out.debug << "subgroupPartitionedExclusiveXorNV"; break; |
| |
| case EOpClip: out.debug << "clip"; break; |
| case EOpIsFinite: out.debug << "isfinite"; break; |
| case EOpLog10: out.debug << "log10"; break; |
| case EOpRcp: out.debug << "rcp"; break; |
| case EOpSaturate: out.debug << "saturate"; break; |
| |
| case EOpSparseTexelsResident: out.debug << "sparseTexelsResident"; break; |
| |
| case EOpMinInvocations: out.debug << "minInvocations"; break; |
| case EOpMaxInvocations: out.debug << "maxInvocations"; break; |
| case EOpAddInvocations: out.debug << "addInvocations"; break; |
| case EOpMinInvocationsNonUniform: out.debug << "minInvocationsNonUniform"; break; |
| case EOpMaxInvocationsNonUniform: out.debug << "maxInvocationsNonUniform"; break; |
| case EOpAddInvocationsNonUniform: out.debug << "addInvocationsNonUniform"; break; |
| |
| case EOpMinInvocationsInclusiveScan: out.debug << "minInvocationsInclusiveScan"; break; |
| case EOpMaxInvocationsInclusiveScan: out.debug << "maxInvocationsInclusiveScan"; break; |
| case EOpAddInvocationsInclusiveScan: out.debug << "addInvocationsInclusiveScan"; break; |
| case EOpMinInvocationsInclusiveScanNonUniform: out.debug << "minInvocationsInclusiveScanNonUniform"; break; |
| case EOpMaxInvocationsInclusiveScanNonUniform: out.debug << "maxInvocationsInclusiveScanNonUniform"; break; |
| case EOpAddInvocationsInclusiveScanNonUniform: out.debug << "addInvocationsInclusiveScanNonUniform"; break; |
| |
| case EOpMinInvocationsExclusiveScan: out.debug << "minInvocationsExclusiveScan"; break; |
| case EOpMaxInvocationsExclusiveScan: out.debug << "maxInvocationsExclusiveScan"; break; |
| case EOpAddInvocationsExclusiveScan: out.debug << "addInvocationsExclusiveScan"; break; |
| case EOpMinInvocationsExclusiveScanNonUniform: out.debug << "minInvocationsExclusiveScanNonUniform"; break; |
| case EOpMaxInvocationsExclusiveScanNonUniform: out.debug << "maxInvocationsExclusiveScanNonUniform"; break; |
| case EOpAddInvocationsExclusiveScanNonUniform: out.debug << "addInvocationsExclusiveScanNonUniform"; break; |
| |
| case EOpMbcnt: out.debug << "mbcnt"; break; |
| |
| case EOpFragmentMaskFetch: out.debug << "fragmentMaskFetchAMD"; break; |
| case EOpFragmentFetch: out.debug << "fragmentFetchAMD"; break; |
| |
| case EOpCubeFaceIndex: out.debug << "cubeFaceIndex"; break; |
| case EOpCubeFaceCoord: out.debug << "cubeFaceCoord"; break; |
| |
| case EOpSubpassLoad: out.debug << "subpassLoad"; break; |
| case EOpSubpassLoadMS: out.debug << "subpassLoadMS"; break; |
| |
| case EOpConstructReference: out.debug << "Construct reference type"; break; |
| |
| default: out.debug.message(EPrefixError, "Bad unary op"); |
| } |
| |
| out.debug << " (" << node->getCompleteString() << ")"; |
| |
| out.debug << "\n"; |
| |
| return true; |
| } |
| |
| bool TOutputTraverser::visitAggregate(TVisit /* visit */, TIntermAggregate* node) |
| { |
| TInfoSink& out = infoSink; |
| |
| if (node->getOp() == EOpNull) { |
| out.debug.message(EPrefixError, "node is still EOpNull!"); |
| return true; |
| } |
| |
| OutputTreeText(out, node, depth); |
| |
| switch (node->getOp()) { |
| case EOpSequence: out.debug << "Sequence\n"; return true; |
| case EOpLinkerObjects: out.debug << "Linker Objects\n"; return true; |
| case EOpComma: out.debug << "Comma"; break; |
| case EOpFunction: out.debug << "Function Definition: " << node->getName(); break; |
| case EOpFunctionCall: out.debug << "Function Call: " << node->getName(); break; |
| case EOpParameters: out.debug << "Function Parameters: "; break; |
| |
| case EOpConstructFloat: out.debug << "Construct float"; break; |
| case EOpConstructDouble:out.debug << "Construct double"; break; |
| |
| case EOpConstructVec2: out.debug << "Construct vec2"; break; |
| case EOpConstructVec3: out.debug << "Construct vec3"; break; |
| case EOpConstructVec4: out.debug << "Construct vec4"; break; |
| case EOpConstructDVec2: out.debug << "Construct dvec2"; break; |
| case EOpConstructDVec3: out.debug << "Construct dvec3"; break; |
| case EOpConstructDVec4: out.debug << "Construct dvec4"; break; |
| case EOpConstructBool: out.debug << "Construct bool"; break; |
| case EOpConstructBVec2: out.debug << "Construct bvec2"; break; |
| case EOpConstructBVec3: out.debug << "Construct bvec3"; break; |
| case EOpConstructBVec4: out.debug << "Construct bvec4"; break; |
| case EOpConstructInt8: out.debug << "Construct int8_t"; break; |
| case EOpConstructI8Vec2: out.debug << "Construct i8vec2"; break; |
| case EOpConstructI8Vec3: out.debug << "Construct i8vec3"; break; |
| case EOpConstructI8Vec4: out.debug << "Construct i8vec4"; break; |
| case EOpConstructInt: out.debug << "Construct int"; break; |
| case EOpConstructIVec2: out.debug << "Construct ivec2"; break; |
| case EOpConstructIVec3: out.debug << "Construct ivec3"; break; |
| case EOpConstructIVec4: out.debug << "Construct ivec4"; break; |
| case EOpConstructUint8: out.debug << "Construct uint8_t"; break; |
| case EOpConstructU8Vec2: out.debug << "Construct u8vec2"; break; |
| case EOpConstructU8Vec3: out.debug << "Construct u8vec3"; break; |
| case EOpConstructU8Vec4: out.debug << "Construct u8vec4"; break; |
| case EOpConstructUint: out.debug << "Construct uint"; break; |
| case EOpConstructUVec2: out.debug << "Construct uvec2"; break; |
| case EOpConstructUVec3: out.debug << "Construct uvec3"; break; |
| case EOpConstructUVec4: out.debug << "Construct uvec4"; break; |
| case EOpConstructInt64: out.debug << "Construct int64"; break; |
| case EOpConstructI64Vec2: out.debug << "Construct i64vec2"; break; |
| case EOpConstructI64Vec3: out.debug << "Construct i64vec3"; break; |
| case EOpConstructI64Vec4: out.debug << "Construct i64vec4"; break; |
| case EOpConstructUint64: out.debug << "Construct uint64"; break; |
| case EOpConstructU64Vec2: out.debug << "Construct u64vec2"; break; |
| case EOpConstructU64Vec3: out.debug << "Construct u64vec3"; break; |
| case EOpConstructU64Vec4: out.debug << "Construct u64vec4"; break; |
| case EOpConstructInt16: out.debug << "Construct int16_t"; break; |
| case EOpConstructI16Vec2: out.debug << "Construct i16vec2"; break; |
| case EOpConstructI16Vec3: out.debug << "Construct i16vec3"; break; |
| case EOpConstructI16Vec4: out.debug << "Construct i16vec4"; break; |
| case EOpConstructUint16: out.debug << "Construct uint16_t"; break; |
| case EOpConstructU16Vec2: out.debug << "Construct u16vec2"; break; |
| case EOpConstructU16Vec3: out.debug << "Construct u16vec3"; break; |
| case EOpConstructU16Vec4: out.debug << "Construct u16vec4"; break; |
| case EOpConstructMat2x2: out.debug << "Construct mat2"; break; |
| case EOpConstructMat2x3: out.debug << "Construct mat2x3"; break; |
| case EOpConstructMat2x4: out.debug << "Construct mat2x4"; break; |
| case EOpConstructMat3x2: out.debug << "Construct mat3x2"; break; |
| case EOpConstructMat3x3: out.debug << "Construct mat3"; break; |
| case EOpConstructMat3x4: out.debug << "Construct mat3x4"; break; |
| case EOpConstructMat4x2: out.debug << "Construct mat4x2"; break; |
| case EOpConstructMat4x3: out.debug << "Construct mat4x3"; break; |
| case EOpConstructMat4x4: out.debug << "Construct mat4"; break; |
| case EOpConstructDMat2x2: out.debug << "Construct dmat2"; break; |
| case EOpConstructDMat2x3: out.debug << "Construct dmat2x3"; break; |
| case EOpConstructDMat2x4: out.debug << "Construct dmat2x4"; break; |
| case EOpConstructDMat3x2: out.debug << "Construct dmat3x2"; break; |
| case EOpConstructDMat3x3: out.debug << "Construct dmat3"; break; |
| case EOpConstructDMat3x4: out.debug << "Construct dmat3x4"; break; |
| case EOpConstructDMat4x2: out.debug << "Construct dmat4x2"; break; |
| case EOpConstructDMat4x3: out.debug << "Construct dmat4x3"; break; |
| case EOpConstructDMat4x4: out.debug << "Construct dmat4"; break; |
| case EOpConstructIMat2x2: out.debug << "Construct imat2"; break; |
| case EOpConstructIMat2x3: out.debug << "Construct imat2x3"; break; |
| case EOpConstructIMat2x4: out.debug << "Construct imat2x4"; break; |
| case EOpConstructIMat3x2: out.debug << "Construct imat3x2"; break; |
| case EOpConstructIMat3x3: out.debug << "Construct imat3"; break; |
| case EOpConstructIMat3x4: out.debug << "Construct imat3x4"; break; |
| case EOpConstructIMat4x2: out.debug << "Construct imat4x2"; break; |
| case EOpConstructIMat4x3: out.debug << "Construct imat4x3"; break; |
| case EOpConstructIMat4x4: out.debug << "Construct imat4"; break; |
| case EOpConstructUMat2x2: out.debug << "Construct umat2"; break; |
| case EOpConstructUMat2x3: out.debug << "Construct umat2x3"; break; |
| case EOpConstructUMat2x4: out.debug << "Construct umat2x4"; break; |
| case EOpConstructUMat3x2: out.debug << "Construct umat3x2"; break; |
| case EOpConstructUMat3x3: out.debug << "Construct umat3"; break; |
| case EOpConstructUMat3x4: out.debug << "Construct umat3x4"; break; |
| case EOpConstructUMat4x2: out.debug << "Construct umat4x2"; break; |
| case EOpConstructUMat4x3: out.debug << "Construct umat4x3"; break; |
| case EOpConstructUMat4x4: out.debug << "Construct umat4"; break; |
| case EOpConstructBMat2x2: out.debug << "Construct bmat2"; break; |
| case EOpConstructBMat2x3: out.debug << "Construct bmat2x3"; break; |
| case EOpConstructBMat2x4: out.debug << "Construct bmat2x4"; break; |
| case EOpConstructBMat3x2: out.debug << "Construct bmat3x2"; break; |
| case EOpConstructBMat3x3: out.debug << "Construct bmat3"; break; |
| case EOpConstructBMat3x4: out.debug << "Construct bmat3x4"; break; |
| case EOpConstructBMat4x2: out.debug << "Construct bmat4x2"; break; |
| case EOpConstructBMat4x3: out.debug << "Construct bmat4x3"; break; |
| case EOpConstructBMat4x4: out.debug << "Construct bmat4"; break; |
| case EOpConstructFloat16: out.debug << "Construct float16_t"; break; |
| case EOpConstructF16Vec2: out.debug << "Construct f16vec2"; break; |
| case EOpConstructF16Vec3: out.debug << "Construct f16vec3"; break; |
| case EOpConstructF16Vec4: out.debug << "Construct f16vec4"; break; |
| case EOpConstructF16Mat2x2: out.debug << "Construct f16mat2"; break; |
| case EOpConstructF16Mat2x3: out.debug << "Construct f16mat2x3"; break; |
| case EOpConstructF16Mat2x4: out.debug << "Construct f16mat2x4"; break; |
| case EOpConstructF16Mat3x2: out.debug << "Construct f16mat3x2"; break; |
| case EOpConstructF16Mat3x3: out.debug << "Construct f16mat3"; break; |
| case EOpConstructF16Mat3x4: out.debug << "Construct f16mat3x4"; break; |
| case EOpConstructF16Mat4x2: out.debug << "Construct f16mat4x2"; break; |
| case EOpConstructF16Mat4x3: out.debug << "Construct f16mat4x3"; break; |
| case EOpConstructF16Mat4x4: out.debug << "Construct f16mat4"; break; |
| case EOpConstructStruct: out.debug << "Construct structure"; break; |
| case EOpConstructTextureSampler: out.debug << "Construct combined texture-sampler"; break; |
| case EOpConstructReference: out.debug << "Construct reference"; break; |
| case EOpConstructCooperativeMatrix: out.debug << "Construct cooperative matrix"; break; |
| |
| case EOpLessThan: out.debug << "Compare Less Than"; break; |
| case EOpGreaterThan: out.debug << "Compare Greater Than"; break; |
| case EOpLessThanEqual: out.debug << "Compare Less Than or Equal"; break; |
| case EOpGreaterThanEqual: out.debug << "Compare Greater Than or Equal"; break; |
| case EOpVectorEqual: out.debug << "Equal"; break; |
| case EOpVectorNotEqual: out.debug << "NotEqual"; break; |
| |
| case EOpMod: out.debug << "mod"; break; |
| case EOpModf: out.debug << "modf"; break; |
| case EOpPow: out.debug << "pow"; break; |
| |
| case EOpAtan: out.debug << "arc tangent"; break; |
| |
| case EOpMin: out.debug << "min"; break; |
| case EOpMax: out.debug << "max"; break; |
| case EOpClamp: out.debug << "clamp"; break; |
| case EOpMix: out.debug << "mix"; break; |
| case EOpStep: out.debug << "step"; break; |
| case EOpSmoothStep: out.debug << "smoothstep"; break; |
| |
| case EOpDistance: out.debug << "distance"; break; |
| case EOpDot: out.debug << "dot-product"; break; |
| case EOpCross: out.debug << "cross-product"; break; |
| case EOpFaceForward: out.debug << "face-forward"; break; |
| case EOpReflect: out.debug << "reflect"; break; |
| case EOpRefract: out.debug << "refract"; break; |
| case EOpMul: out.debug << "component-wise multiply"; break; |
| case EOpOuterProduct: out.debug << "outer product"; break; |
| |
| case EOpEmitVertex: out.debug << "EmitVertex"; break; |
| case EOpEndPrimitive: out.debug << "EndPrimitive"; break; |
| |
| case EOpBarrier: out.debug << "Barrier"; break; |
| case EOpMemoryBarrier: out.debug << "MemoryBarrier"; break; |
| case EOpMemoryBarrierAtomicCounter: out.debug << "MemoryBarrierAtomicCounter"; break; |
| case EOpMemoryBarrierBuffer: out.debug << "MemoryBarrierBuffer"; break; |
| case EOpMemoryBarrierImage: out.debug << "MemoryBarrierImage"; break; |
| case EOpMemoryBarrierShared: out.debug << "MemoryBarrierShared"; break; |
| case EOpGroupMemoryBarrier: out.debug << "GroupMemoryBarrier"; break; |
| |
| case EOpReadInvocation: out.debug << "readInvocation"; break; |
| |
| case EOpSwizzleInvocations: out.debug << "swizzleInvocations"; break; |
| case EOpSwizzleInvocationsMasked: out.debug << "swizzleInvocationsMasked"; break; |
| case EOpWriteInvocation: out.debug << "writeInvocation"; break; |
| |
| case EOpMin3: out.debug << "min3"; break; |
| case EOpMax3: out.debug << "max3"; break; |
| case EOpMid3: out.debug << "mid3"; break; |
| case EOpTime: out.debug << "time"; break; |
| |
| case EOpAtomicAdd: out.debug << "AtomicAdd"; break; |
| case EOpAtomicMin: out.debug << "AtomicMin"; break; |
| case EOpAtomicMax: out.debug << "AtomicMax"; break; |
| case EOpAtomicAnd: out.debug << "AtomicAnd"; break; |
| case EOpAtomicOr: out.debug << "AtomicOr"; break; |
| case EOpAtomicXor: out.debug << "AtomicXor"; break; |
| case EOpAtomicExchange: out.debug << "AtomicExchange"; break; |
| case EOpAtomicCompSwap: out.debug << "AtomicCompSwap"; break; |
| case EOpAtomicLoad: out.debug << "AtomicLoad"; break; |
| case EOpAtomicStore: out.debug << "AtomicStore"; break; |
| |
| case EOpAtomicCounterAdd: out.debug << "AtomicCounterAdd"; break; |
| case EOpAtomicCounterSubtract: out.debug << "AtomicCounterSubtract"; break; |
| case EOpAtomicCounterMin: out.debug << "AtomicCounterMin"; break; |
| case EOpAtomicCounterMax: out.debug << "AtomicCounterMax"; break; |
| case EOpAtomicCounterAnd: out.debug << "AtomicCounterAnd"; break; |
| case EOpAtomicCounterOr: out.debug << "AtomicCounterOr"; break; |
| case EOpAtomicCounterXor: out.debug << "AtomicCounterXor"; break; |
| case EOpAtomicCounterExchange: out.debug << "AtomicCounterExchange"; break; |
| case EOpAtomicCounterCompSwap: out.debug << "AtomicCounterCompSwap"; break; |
| |
| case EOpImageQuerySize: out.debug << "imageQuerySize"; break; |
| case EOpImageQuerySamples: out.debug << "imageQuerySamples"; break; |
| case EOpImageLoad: out.debug << "imageLoad"; break; |
| case EOpImageStore: out.debug << "imageStore"; break; |
| case EOpImageAtomicAdd: out.debug << "imageAtomicAdd"; break; |
| case EOpImageAtomicMin: out.debug << "imageAtomicMin"; break; |
| case EOpImageAtomicMax: out.debug << "imageAtomicMax"; break; |
| case EOpImageAtomicAnd: out.debug << "imageAtomicAnd"; break; |
| case EOpImageAtomicOr: out.debug << "imageAtomicOr"; break; |
| case EOpImageAtomicXor: out.debug << "imageAtomicXor"; break; |
| case EOpImageAtomicExchange: out.debug << "imageAtomicExchange"; break; |
| case EOpImageAtomicCompSwap: out.debug << "imageAtomicCompSwap"; break; |
| case EOpImageAtomicLoad: out.debug << "imageAtomicLoad"; break; |
| case EOpImageAtomicStore: out.debug << "imageAtomicStore"; break; |
| case EOpImageLoadLod: out.debug << "imageLoadLod"; break; |
| case EOpImageStoreLod: out.debug << "imageStoreLod"; break; |
| |
| case EOpTextureQuerySize: out.debug << "textureSize"; break; |
| case EOpTextureQueryLod: out.debug << "textureQueryLod"; break; |
| case EOpTextureQueryLevels: out.debug << "textureQueryLevels"; break; |
| case EOpTextureQuerySamples: out.debug << "textureSamples"; break; |
| case EOpTexture: out.debug << "texture"; break; |
| case EOpTextureProj: out.debug << "textureProj"; break; |
| case EOpTextureLod: out.debug << "textureLod"; break; |
| case EOpTextureOffset: out.debug << "textureOffset"; break; |
| case EOpTextureFetch: out.debug << "textureFetch"; break; |
| case EOpTextureFetchOffset: out.debug << "textureFetchOffset"; break; |
| case EOpTextureProjOffset: out.debug << "textureProjOffset"; break; |
| case EOpTextureLodOffset: out.debug << "textureLodOffset"; break; |
| case EOpTextureProjLod: out.debug << "textureProjLod"; break; |
| case EOpTextureProjLodOffset: out.debug << "textureProjLodOffset"; break; |
| case EOpTextureGrad: out.debug << "textureGrad"; break; |
| case EOpTextureGradOffset: out.debug << "textureGradOffset"; break; |
| case EOpTextureProjGrad: out.debug << "textureProjGrad"; break; |
| case EOpTextureProjGradOffset: out.debug << "textureProjGradOffset"; break; |
| case EOpTextureGather: out.debug << "textureGather"; break; |
| case EOpTextureGatherOffset: out.debug << "textureGatherOffset"; break; |
| case EOpTextureGatherOffsets: out.debug << "textureGatherOffsets"; break; |
| case EOpTextureClamp: out.debug << "textureClamp"; break; |
| case EOpTextureOffsetClamp: out.debug << "textureOffsetClamp"; break; |
| case EOpTextureGradClamp: out.debug << "textureGradClamp"; break; |
| case EOpTextureGradOffsetClamp: out.debug << "textureGradOffsetClamp"; break; |
| case EOpTextureGatherLod: out.debug << "textureGatherLod"; break; |
| case EOpTextureGatherLodOffset: out.debug << "textureGatherLodOffset"; break; |
| case EOpTextureGatherLodOffsets: out.debug << "textureGatherLodOffsets"; break; |
| |
| case EOpSparseTexture: out.debug << "sparseTexture"; break; |
| case EOpSparseTextureOffset: out.debug << "sparseTextureOffset"; break; |
| case EOpSparseTextureLod: out.debug << "sparseTextureLod"; break; |
| case EOpSparseTextureLodOffset: out.debug << "sparseTextureLodOffset"; break; |
| case EOpSparseTextureFetch: out.debug << "sparseTexelFetch"; break; |
| case EOpSparseTextureFetchOffset: out.debug << "sparseTexelFetchOffset"; break; |
| case EOpSparseTextureGrad: out.debug << "sparseTextureGrad"; break; |
| case EOpSparseTextureGradOffset: out.debug << "sparseTextureGradOffset"; break; |
| case EOpSparseTextureGather: out.debug << "sparseTextureGather"; break; |
| case EOpSparseTextureGatherOffset: out.debug << "sparseTextureGatherOffset"; break; |
| case EOpSparseTextureGatherOffsets: out.debug << "sparseTextureGatherOffsets"; break; |
| case EOpSparseImageLoad: out.debug << "sparseImageLoad"; break; |
| case EOpSparseTextureClamp: out.debug << "sparseTextureClamp"; break; |
| case EOpSparseTextureOffsetClamp: out.debug << "sparseTextureOffsetClamp"; break; |
| case EOpSparseTextureGradClamp: out.debug << "sparseTextureGradClamp"; break; |
| case EOpSparseTextureGradOffsetClamp: out.debug << "sparseTextureGradOffsetClam"; break; |
| case EOpSparseTextureGatherLod: out.debug << "sparseTextureGatherLod"; break; |
| case EOpSparseTextureGatherLodOffset: out.debug << "sparseTextureGatherLodOffset"; break; |
| case EOpSparseTextureGatherLodOffsets: out.debug << "sparseTextureGatherLodOffsets"; break; |
| case EOpSparseImageLoadLod: out.debug << "sparseImageLoadLod"; break; |
| case EOpImageSampleFootprintNV: out.debug << "imageSampleFootprintNV"; break; |
| case EOpImageSampleFootprintClampNV: out.debug << "imageSampleFootprintClampNV"; break; |
| case EOpImageSampleFootprintLodNV: out.debug << "imageSampleFootprintLodNV"; break; |
| case EOpImageSampleFootprintGradNV: out.debug << "imageSampleFootprintGradNV"; break; |
| case EOpImageSampleFootprintGradClampNV: out.debug << "mageSampleFootprintGradClampNV"; break; |
| case EOpAddCarry: out.debug << "addCarry"; break; |
| case EOpSubBorrow: out.debug << "subBorrow"; break; |
| case EOpUMulExtended: out.debug << "uMulExtended"; break; |
| case EOpIMulExtended: out.debug << "iMulExtended"; break; |
| case EOpBitfieldExtract: out.debug << "bitfieldExtract"; break; |
| case EOpBitfieldInsert: out.debug << "bitfieldInsert"; break; |
| |
| case EOpFma: out.debug << "fma"; break; |
| case EOpFrexp: out.debug << "frexp"; break; |
| case EOpLdexp: out.debug << "ldexp"; break; |
| |
| case EOpInterpolateAtSample: out.debug << "interpolateAtSample"; break; |
| case EOpInterpolateAtOffset: out.debug << "interpolateAtOffset"; break; |
| case EOpInterpolateAtVertex: out.debug << "interpolateAtVertex"; break; |
| |
| case EOpSinCos: out.debug << "sincos"; break; |
| case EOpGenMul: out.debug << "mul"; break; |
| |
| case EOpAllMemoryBarrierWithGroupSync: out.debug << "AllMemoryBarrierWithGroupSync"; break; |
| case EOpDeviceMemoryBarrier: out.debug << "DeviceMemoryBarrier"; break; |
| case EOpDeviceMemoryBarrierWithGroupSync: out.debug << "DeviceMemoryBarrierWithGroupSync"; break; |
| case EOpWorkgroupMemoryBarrier: out.debug << "WorkgroupMemoryBarrier"; break; |
| case EOpWorkgroupMemoryBarrierWithGroupSync: out.debug << "WorkgroupMemoryBarrierWithGroupSync"; break; |
| |
| case EOpSubgroupBarrier: out.debug << "subgroupBarrier"; break; |
| case EOpSubgroupMemoryBarrier: out.debug << "subgroupMemoryBarrier"; break; |
| case EOpSubgroupMemoryBarrierBuffer: out.debug << "subgroupMemoryBarrierBuffer"; break; |
| case EOpSubgroupMemoryBarrierImage: out.debug << "subgroupMemoryBarrierImage"; break; |
| case EOpSubgroupMemoryBarrierShared: out.debug << "subgroupMemoryBarrierShared"; break; |
| case EOpSubgroupElect: out.debug << "subgroupElect"; break; |
| case EOpSubgroupAll: out.debug << "subgroupAll"; break; |
| case EOpSubgroupAny: out.debug << "subgroupAny"; break; |
| case EOpSubgroupAllEqual: out.debug << "subgroupAllEqual"; break; |
| case EOpSubgroupBroadcast: out.debug << "subgroupBroadcast"; break; |
| case EOpSubgroupBroadcastFirst: out.debug << "subgroupBroadcastFirst"; break; |
| case EOpSubgroupBallot: out.debug << "subgroupBallot"; break; |
| case EOpSubgroupInverseBallot: out.debug << "subgroupInverseBallot"; break; |
| case EOpSubgroupBallotBitExtract: out.debug << "subgroupBallotBitExtract"; break; |
| case EOpSubgroupBallotBitCount: out.debug << "subgroupBallotBitCount"; break; |
| case EOpSubgroupBallotInclusiveBitCount: out.debug << "subgroupBallotInclusiveBitCount"; break; |
| case EOpSubgroupBallotExclusiveBitCount: out.debug << "subgroupBallotExclusiveBitCount"; break; |
| case EOpSubgroupBallotFindLSB: out.debug << "subgroupBallotFindLSB"; break; |
| case EOpSubgroupBallotFindMSB: out.debug << "subgroupBallotFindMSB"; break; |
| case EOpSubgroupShuffle: out.debug << "subgroupShuffle"; break; |
| case EOpSubgroupShuffleXor: out.debug << "subgroupShuffleXor"; break; |
| case EOpSubgroupShuffleUp: out.debug << "subgroupShuffleUp"; break; |
| case EOpSubgroupShuffleDown: out.debug << "subgroupShuffleDown"; break; |
| case EOpSubgroupAdd: out.debug << "subgroupAdd"; break; |
| case EOpSubgroupMul: out.debug << "subgroupMul"; break; |
| case EOpSubgroupMin: out.debug << "subgroupMin"; break; |
| case EOpSubgroupMax: out.debug << "subgroupMax"; break; |
| case EOpSubgroupAnd: out.debug << "subgroupAnd"; break; |
| case EOpSubgroupOr: out.debug << "subgroupOr"; break; |
| case EOpSubgroupXor: out.debug << "subgroupXor"; break; |
| case EOpSubgroupInclusiveAdd: out.debug << "subgroupInclusiveAdd"; break; |
| case EOpSubgroupInclusiveMul: out.debug << "subgroupInclusiveMul"; break; |
| case EOpSubgroupInclusiveMin: out.debug << "subgroupInclusiveMin"; break; |
| case EOpSubgroupInclusiveMax: out.debug << "subgroupInclusiveMax"; break; |
| case EOpSubgroupInclusiveAnd: out.debug << "subgroupInclusiveAnd"; break; |
| case EOpSubgroupInclusiveOr: out.debug << "subgroupInclusiveOr"; break; |
| case EOpSubgroupInclusiveXor: out.debug << "subgroupInclusiveXor"; break; |
| case EOpSubgroupExclusiveAdd: out.debug << "subgroupExclusiveAdd"; break; |
| case EOpSubgroupExclusiveMul: out.debug << "subgroupExclusiveMul"; break; |
| case EOpSubgroupExclusiveMin: out.debug << "subgroupExclusiveMin"; break; |
| case EOpSubgroupExclusiveMax: out.debug << "subgroupExclusiveMax"; break; |
| case EOpSubgroupExclusiveAnd: out.debug << "subgroupExclusiveAnd"; break; |
| case EOpSubgroupExclusiveOr: out.debug << "subgroupExclusiveOr"; break; |
| case EOpSubgroupExclusiveXor: out.debug << "subgroupExclusiveXor"; break; |
| case EOpSubgroupClusteredAdd: out.debug << "subgroupClusteredAdd"; break; |
| case EOpSubgroupClusteredMul: out.debug << "subgroupClusteredMul"; break; |
| case EOpSubgroupClusteredMin: out.debug << "subgroupClusteredMin"; break; |
| case EOpSubgroupClusteredMax: out.debug << "subgroupClusteredMax"; break; |
| case EOpSubgroupClusteredAnd: out.debug << "subgroupClusteredAnd"; break; |
| case EOpSubgroupClusteredOr: out.debug << "subgroupClusteredOr"; break; |
| case EOpSubgroupClusteredXor: out.debug << "subgroupClusteredXor"; break; |
| case EOpSubgroupQuadBroadcast: out.debug << "subgroupQuadBroadcast"; break; |
| case EOpSubgroupQuadSwapHorizontal: out.debug << "subgroupQuadSwapHorizontal"; break; |
| case EOpSubgroupQuadSwapVertical: out.debug << "subgroupQuadSwapVertical"; break; |
| case EOpSubgroupQuadSwapDiagonal: out.debug << "subgroupQuadSwapDiagonal"; break; |
| |
| case EOpSubgroupPartition: out.debug << "subgroupPartitionNV"; break; |
| case EOpSubgroupPartitionedAdd: out.debug << "subgroupPartitionedAddNV"; break; |
| case EOpSubgroupPartitionedMul: out.debug << "subgroupPartitionedMulNV"; break; |
| case EOpSubgroupPartitionedMin: out.debug << "subgroupPartitionedMinNV"; break; |
| case EOpSubgroupPartitionedMax: out.debug << "subgroupPartitionedMaxNV"; break; |
| case EOpSubgroupPartitionedAnd: out.debug << "subgroupPartitionedAndNV"; break; |
| case EOpSubgroupPartitionedOr: out.debug << "subgroupPartitionedOrNV"; break; |
| case EOpSubgroupPartitionedXor: out.debug << "subgroupPartitionedXorNV"; break; |
| case EOpSubgroupPartitionedInclusiveAdd: out.debug << "subgroupPartitionedInclusiveAddNV"; break; |
| case EOpSubgroupPartitionedInclusiveMul: out.debug << "subgroupPartitionedInclusiveMulNV"; break; |
| case EOpSubgroupPartitionedInclusiveMin: out.debug << "subgroupPartitionedInclusiveMinNV"; break; |
| case EOpSubgroupPartitionedInclusiveMax: out.debug << "subgroupPartitionedInclusiveMaxNV"; break; |
| case EOpSubgroupPartitionedInclusiveAnd: out.debug << "subgroupPartitionedInclusiveAndNV"; break; |
| case EOpSubgroupPartitionedInclusiveOr: out.debug << "subgroupPartitionedInclusiveOrNV"; break; |
| case EOpSubgroupPartitionedInclusiveXor: out.debug << "subgroupPartitionedInclusiveXorNV"; break; |
| case EOpSubgroupPartitionedExclusiveAdd: out.debug << "subgroupPartitionedExclusiveAddNV"; break; |
| case EOpSubgroupPartitionedExclusiveMul: out.debug << "subgroupPartitionedExclusiveMulNV"; break; |
| case EOpSubgroupPartitionedExclusiveMin: out.debug << "subgroupPartitionedExclusiveMinNV"; break; |
| case EOpSubgroupPartitionedExclusiveMax: out.debug << "subgroupPartitionedExclusiveMaxNV"; break; |
| case EOpSubgroupPartitionedExclusiveAnd: out.debug << "subgroupPartitionedExclusiveAndNV"; break; |
| case EOpSubgroupPartitionedExclusiveOr: out.debug << "subgroupPartitionedExclusiveOrNV"; break; |
| case EOpSubgroupPartitionedExclusiveXor: out.debug << "subgroupPartitionedExclusiveXorNV"; break; |
| |
| case EOpSubpassLoad: out.debug << "subpassLoad"; break; |
| case EOpSubpassLoadMS: out.debug << "subpassLoadMS"; break; |
| |
| case EOpTrace: out.debug << "traceNV"; break; |
| case EOpReportIntersection: out.debug << "reportIntersectionNV"; break; |
| case EOpIgnoreIntersection: out.debug << "ignoreIntersectionNV"; break; |
| case EOpTerminateRay: out.debug << "terminateRayNV"; break; |
| case EOpExecuteCallable: out.debug << "executeCallableNV"; break; |
| case EOpWritePackedPrimitiveIndices4x8NV: out.debug << "writePackedPrimitiveIndices4x8NV"; break; |
| |
| case EOpRayQueryInitialize: out.debug << "rayQueryInitializeEXT"; break; |
| case EOpRayQueryTerminate: out.debug << "rayQueryTerminateEXT"; break; |
| case EOpRayQueryGenerateIntersection: out.debug << "rayQueryGenerateIntersectionEXT"; break; |
| case EOpRayQueryConfirmIntersection: out.debug << "rayQueryConfirmIntersectionEXT"; break; |
| case EOpRayQueryProceed: out.debug << "rayQueryProceedEXT"; break; |
| case EOpRayQueryGetIntersectionType: out.debug << "rayQueryGetIntersectionTypeEXT"; break; |
| case EOpRayQueryGetRayTMin: out.debug << "rayQueryGetRayTMinEXT"; break; |
| case EOpRayQueryGetRayFlags: out.debug << "rayQueryGetRayFlagsEXT"; break; |
| case EOpRayQueryGetIntersectionT: out.debug << "rayQueryGetIntersectionTEXT"; break; |
| case EOpRayQueryGetIntersectionInstanceCustomIndex: out.debug << "rayQueryGetIntersectionInstanceCustomIndexEXT"; break; |
| case EOpRayQueryGetIntersectionInstanceId: out.debug << "rayQueryGetIntersectionInstanceIdEXT"; break; |
| case EOpRayQueryGetIntersectionInstanceShaderBindingTableRecordOffset: out.debug << "rayQueryGetIntersectionInstanceShaderBindingTableRecordOffsetEXT"; break; |
| case EOpRayQueryGetIntersectionGeometryIndex: out.debug << "rayQueryGetIntersectionGeometryIndexEXT"; break; |
| case EOpRayQueryGetIntersectionPrimitiveIndex: out.debug << "rayQueryGetIntersectionPrimitiveIndexEXT"; break; |
| case EOpRayQueryGetIntersectionBarycentrics: out.debug << "rayQueryGetIntersectionBarycentricsEXT"; break; |
| case EOpRayQueryGetIntersectionFrontFace: out.debug << "rayQueryGetIntersectionFrontFaceEXT"; break; |
| case EOpRayQueryGetIntersectionCandidateAABBOpaque: out.debug << "rayQueryGetIntersectionCandidateAABBOpaqueEXT"; break; |
| case EOpRayQueryGetIntersectionObjectRayDirection: out.debug << "rayQueryGetIntersectionObjectRayDirectionEXT"; break; |
| case EOpRayQueryGetIntersectionObjectRayOrigin: out.debug << "rayQueryGetIntersectionObjectRayOriginEXT"; break; |
| case EOpRayQueryGetWorldRayDirection: out.debug << "rayQueryGetWorldRayDirectionEXT"; break; |
| case EOpRayQueryGetWorldRayOrigin: out.debug << "rayQueryGetWorldRayOriginEXT"; break; |
| case EOpRayQueryGetIntersectionObjectToWorld: out.debug << "rayQueryGetIntersectionObjectToWorldEXT"; break; |
| case EOpRayQueryGetIntersectionWorldToObject: out.debug << "rayQueryGetIntersectionWorldToObjectEXT"; break; |
| |
| case EOpCooperativeMatrixLoad: out.debug << "Load cooperative matrix"; break; |
| case EOpCooperativeMatrixStore: out.debug << "Store cooperative matrix"; break; |
| case EOpCooperativeMatrixMulAdd: out.debug << "MulAdd cooperative matrices"; break; |
| |
| case EOpIsHelperInvocation: out.debug << "IsHelperInvocation"; break; |
| case EOpDebugPrintf: out.debug << "Debug printf"; break; |
| |
| default: out.debug.message(EPrefixError, "Bad aggregation op"); |
| } |
| |
| if (node->getOp() != EOpSequence && node->getOp() != EOpParameters) |
| out.debug << " (" << node->getCompleteString() << ")"; |
| |
| out.debug << "\n"; |
| |
| return true; |
| } |
| |
| bool TOutputTraverser::visitSelection(TVisit /* visit */, TIntermSelection* node) |
| { |
| TInfoSink& out = infoSink; |
| |
| OutputTreeText(out, node, depth); |
| |
| out.debug << "Test condition and select"; |
| out.debug << " (" << node->getCompleteString() << ")"; |
| |
| if (node->getShortCircuit() == false) |
| out.debug << ": no shortcircuit"; |
| if (node->getFlatten()) |
| out.debug << ": Flatten"; |
| if (node->getDontFlatten()) |
| out.debug << ": DontFlatten"; |
| out.debug << "\n"; |
| |
| ++depth; |
| |
| OutputTreeText(out, node, depth); |
| out.debug << "Condition\n"; |
| node->getCondition()->traverse(this); |
| |
| OutputTreeText(out, node, depth); |
| if (node->getTrueBlock()) { |
| out.debug << "true case\n"; |
| node->getTrueBlock()->traverse(this); |
| } else |
| out.debug << "true case is null\n"; |
| |
| if (node->getFalseBlock()) { |
| OutputTreeText(out, node, depth); |
| out.debug << "false case\n"; |
| node->getFalseBlock()->traverse(this); |
| } |
| |
| --depth; |
| |
| return false; |
| } |
| |
| // Print infinities and NaNs, and numbers in a portable way. |
| // Goals: |
| // - portable (across IEEE 754 platforms) |
| // - shows all possible IEEE values |
| // - shows simple numbers in a simple way, e.g., no leading/trailing 0s |
| // - shows all digits, no premature rounding |
| static void OutputDouble(TInfoSink& out, double value, TOutputTraverser::EExtraOutput extra) |
| { |
| if (IsInfinity(value)) { |
| if (value < 0) |
| out.debug << "-1.#INF"; |
| else |
| out.debug << "+1.#INF"; |
| } else if (IsNan(value)) |
| out.debug << "1.#IND"; |
| else { |
| const int maxSize = 340; |
| char buf[maxSize]; |
| const char* format = "%f"; |
| if (fabs(value) > 0.0 && (fabs(value) < 1e-5 || fabs(value) > 1e12)) |
| format = "%-.13e"; |
| int len = snprintf(buf, maxSize, format, value); |
| assert(len < maxSize); |
| |
| // remove a leading zero in the 100s slot in exponent; it is not portable |
| // pattern: XX...XXXe+0XX or XX...XXXe-0XX |
| if (len > 5) { |
| if (buf[len-5] == 'e' && (buf[len-4] == '+' || buf[len-4] == '-') && buf[len-3] == '0') { |
| buf[len-3] = buf[len-2]; |
| buf[len-2] = buf[len-1]; |
| buf[len-1] = '\0'; |
| } |
| } |
| |
| out.debug << buf; |
| |
| switch (extra) { |
| case TOutputTraverser::BinaryDoubleOutput: |
| { |
| uint64_t b; |
| static_assert(sizeof(b) == sizeof(value), "sizeof(uint64_t) != sizeof(double)"); |
| memcpy(&b, &value, sizeof(b)); |
| |
| out.debug << " : "; |
| for (size_t i = 0; i < 8 * sizeof(value); ++i, ++b) { |
| out.debug << ((b & 0x8000000000000000) != 0 ? "1" : "0"); |
| b <<= 1; |
| } |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| } |
| |
| static void OutputConstantUnion(TInfoSink& out, const TIntermTyped* node, const TConstUnionArray& constUnion, |
| TOutputTraverser::EExtraOutput extra, int depth) |
| { |
| int size = node->getType().computeNumComponents(); |
| |
| for (int i = 0; i < size; i++) { |
| OutputTreeText(out, node, depth); |
| switch (constUnion[i].getType()) { |
| case EbtBool: |
| if (constUnion[i].getBConst()) |
| out.debug << "true"; |
| else |
| out.debug << "false"; |
| |
| out.debug << " (" << "const bool" << ")"; |
| |
| out.debug << "\n"; |
| break; |
| case EbtFloat: |
| case EbtDouble: |
| case EbtFloat16: |
| OutputDouble(out, constUnion[i].getDConst(), extra); |
| out.debug << "\n"; |
| break; |
| case EbtInt8: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%d (%s)", constUnion[i].getI8Const(), "const int8_t"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| case EbtUint8: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%u (%s)", constUnion[i].getU8Const(), "const uint8_t"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| case EbtInt16: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%d (%s)", constUnion[i].getI16Const(), "const int16_t"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| case EbtUint16: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%u (%s)", constUnion[i].getU16Const(), "const uint16_t"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| case EbtInt: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%d (%s)", constUnion[i].getIConst(), "const int"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| case EbtUint: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%u (%s)", constUnion[i].getUConst(), "const uint"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| case EbtInt64: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%lld (%s)", constUnion[i].getI64Const(), "const int64_t"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| case EbtUint64: |
| { |
| const int maxSize = 300; |
| char buf[maxSize]; |
| snprintf(buf, maxSize, "%llu (%s)", constUnion[i].getU64Const(), "const uint64_t"); |
| |
| out.debug << buf << "\n"; |
| } |
| break; |
| default: |
| out.info.message(EPrefixInternalError, "Unknown constant", node->getLoc()); |
| break; |
| } |
| } |
| } |
| |
| void TOutputTraverser::visitConstantUnion(TIntermConstantUnion* node) |
| { |
| OutputTreeText(infoSink, node, depth); |
| infoSink.debug << "Constant:\n"; |
| |
| OutputConstantUnion(infoSink, node, node->getConstArray(), extraOutput, depth + 1); |
| } |
| |
| void TOutputTraverser::visitSymbol(TIntermSymbol* node) |
| { |
| OutputTreeText(infoSink, node, depth); |
| |
| infoSink.debug << "'" << node->getName() << "' (" << node->getCompleteString() << ")\n"; |
| |
| if (! node->getConstArray().empty()) |
| OutputConstantUnion(infoSink, node, node->getConstArray(), extraOutput, depth + 1); |
| else if (node->getConstSubtree()) { |
| incrementDepth(node); |
| node->getConstSubtree()->traverse(this); |
| decrementDepth(); |
| } |
| } |
| |
| bool TOutputTraverser::visitLoop(TVisit /* visit */, TIntermLoop* node) |
| { |
| TInfoSink& out = infoSink; |
| |
| OutputTreeText(out, node, depth); |
| |
| out.debug << "Loop with condition "; |
| if (! node->testFirst()) |
| out.debug << "not "; |
| out.debug << "tested first"; |
| |
| if (node->getUnroll()) |
| out.debug << ": Unroll"; |
| if (node->getDontUnroll()) |
| out.debug << ": DontUnroll"; |
| if (node->getLoopDependency()) { |
| out.debug << ": Dependency "; |
| out.debug << node->getLoopDependency(); |
| } |
| out.debug << "\n"; |
| |
| ++depth; |
| |
| OutputTreeText(infoSink, node, depth); |
| if (node->getTest()) { |
| out.debug << "Loop Condition\n"; |
| node->getTest()->traverse(this); |
| } else |
| out.debug << "No loop condition\n"; |
| |
| OutputTreeText(infoSink, node, depth); |
| if (node->getBody()) { |
| out.debug << "Loop Body\n"; |
| node->getBody()->traverse(this); |
| } else |
| out.debug << "No loop body\n"; |
| |
| if (node->getTerminal()) { |
| OutputTreeText(infoSink, node, depth); |
| out.debug << "Loop Terminal Expression\n"; |
| node->getTerminal()->traverse(this); |
| } |
| |
| --depth; |
| |
| return false; |
| } |
| |
| bool TOutputTraverser::visitBranch(TVisit /* visit*/, TIntermBranch* node) |
| { |
| TInfoSink& out = infoSink; |
| |
| OutputTreeText(out, node, depth); |
| |
| switch (node->getFlowOp()) { |
| case EOpKill: out.debug << "Branch: Kill"; break; |
| case EOpBreak: out.debug << "Branch: Break"; break; |
| case EOpContinue: out.debug << "Branch: Continue"; break; |
| case EOpReturn: out.debug << "Branch: Return"; break; |
| case EOpCase: out.debug << "case: "; break; |
| case EOpDemote: out.debug << "Demote"; break; |
| case EOpDefault: out.debug << "default: "; break; |
| default: out.debug << "Branch: Unknown Branch"; break; |
| } |
| |
| if (node->getExpression()) { |
| out.debug << " with expression\n"; |
| ++depth; |
| node->getExpression()->traverse(this); |
| --depth; |
| } else |
| out.debug << "\n"; |
| |
| return false; |
| } |
| |
| bool TOutputTraverser::visitSwitch(TVisit /* visit */, TIntermSwitch* node) |
| { |
| TInfoSink& out = infoSink; |
| |
| OutputTreeText(out, node, depth); |
| out.debug << "switch"; |
| |
| if (node->getFlatten()) |
| out.debug << ": Flatten"; |
| if (node->getDontFlatten()) |
| out.debug << ": DontFlatten"; |
| out.debug << "\n"; |
| |
| OutputTreeText(out, node, depth); |
| out.debug << "condition\n"; |
| ++depth; |
| node->getCondition()->traverse(this); |
| |
| --depth; |
| OutputTreeText(out, node, depth); |
| out.debug << "body\n"; |
| ++depth; |
| node->getBody()->traverse(this); |
| |
| --depth; |
| |
| return false; |
| } |
| |
| // |
| // This function is the one to call externally to start the traversal. |
| // Individual functions can be initialized to 0 to skip processing of that |
| // type of node. It's children will still be processed. |
| // |
| void TIntermediate::output(TInfoSink& infoSink, bool tree) |
| { |
| infoSink.debug << "Shader version: " << version << "\n"; |
| if (requestedExtensions.size() > 0) { |
| for (auto extIt = requestedExtensions.begin(); extIt != requestedExtensions.end(); ++extIt) |
| infoSink.debug << "Requested " << *extIt << "\n"; |
| } |
| |
| if (xfbMode) |
| infoSink.debug << "in xfb mode\n"; |
| |
| switch (language) { |
| case EShLangVertex: |
| break; |
| |
| case EShLangTessControl: |
| infoSink.debug << "vertices = " << vertices << "\n"; |
| |
| if (inputPrimitive != ElgNone) |
| infoSink.debug << "input primitive = " << TQualifier::getGeometryString(inputPrimitive) << "\n"; |
| if (vertexSpacing != EvsNone) |
| infoSink.debug << "vertex spacing = " << TQualifier::getVertexSpacingString(vertexSpacing) << "\n"; |
| if (vertexOrder != EvoNone) |
| infoSink.debug << "triangle order = " << TQualifier::getVertexOrderString(vertexOrder) << "\n"; |
| break; |
| |
| case EShLangTessEvaluation: |
| infoSink.debug << "input primitive = " << TQualifier::getGeometryString(inputPrimitive) << "\n"; |
| infoSink.debug << "vertex spacing = " << TQualifier::getVertexSpacingString(vertexSpacing) << "\n"; |
| infoSink.debug << "triangle order = " << TQualifier::getVertexOrderString(vertexOrder) << "\n"; |
| if (pointMode) |
| infoSink.debug << "using point mode\n"; |
| break; |
| |
| case EShLangGeometry: |
| infoSink.debug << "invocations = " << invocations << "\n"; |
| infoSink.debug << "max_vertices = " << vertices << "\n"; |
| infoSink.debug << "input primitive = " << TQualifier::getGeometryString(inputPrimitive) << "\n"; |
| infoSink.debug << "output primitive = " << TQualifier::getGeometryString(outputPrimitive) << "\n"; |
| break; |
| |
| case EShLangFragment: |
| if (pixelCenterInteger) |
| infoSink.debug << "gl_FragCoord pixel center is integer\n"; |
| if (originUpperLeft) |
| infoSink.debug << "gl_FragCoord origin is upper left\n"; |
| if (earlyFragmentTests) |
| infoSink.debug << "using early_fragment_tests\n"; |
| if (postDepthCoverage) |
| infoSink.debug << "using post_depth_coverage\n"; |
| if (depthLayout != EldNone) |
| infoSink.debug << "using " << TQualifier::getLayoutDepthString(depthLayout) << "\n"; |
| if (blendEquations != 0) { |
| infoSink.debug << "using"; |
| // blendEquations is a mask, decode it |
| for (TBlendEquationShift be = (TBlendEquationShift)0; be < EBlendCount; be = (TBlendEquationShift)(be + 1)) { |
| if (blendEquations & (1 << be)) |
| infoSink.debug << " " << TQualifier::getBlendEquationString(be); |
| } |
| infoSink.debug << "\n"; |
| } |
| if (interlockOrdering != EioNone) |
| infoSink.debug << "interlock ordering = " << TQualifier::getInterlockOrderingString(interlockOrdering) << "\n"; |
| break; |
| |
| case EShLangMeshNV: |
| infoSink.debug << "max_vertices = " << vertices << "\n"; |
| infoSink.debug << "max_primitives = " << primitives << "\n"; |
| infoSink.debug << "output primitive = " << TQualifier::getGeometryString(outputPrimitive) << "\n"; |
| // Fall through |
| case EShLangTaskNV: |
| // Fall through |
| case EShLangCompute: |
| infoSink.debug << "local_size = (" << localSize[0] << ", " << localSize[1] << ", " << localSize[2] << ")\n"; |
| { |
| if (localSizeSpecId[0] != TQualifier::layoutNotSet || |
| localSizeSpecId[1] != TQualifier::layoutNotSet || |
| localSizeSpecId[2] != TQualifier::layoutNotSet) { |
| infoSink.debug << "local_size ids = (" << |
| localSizeSpecId[0] << ", " << |
| localSizeSpecId[1] << ", " << |
| localSizeSpecId[2] << ")\n"; |
| } |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| if (treeRoot == 0 || ! tree) |
| return; |
| |
| TOutputTraverser it(infoSink); |
| if (getBinaryDoubleOutput()) |
| it.setDoubleOutput(TOutputTraverser::BinaryDoubleOutput); |
| treeRoot->traverse(&it); |
| } |
| |
| } // end namespace glslang |
| |
| #endif // !GLSLANG_WEB && !GLSLANG_ANGLE |
