diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..ee92be8
--- /dev/null
+++ b/AUTHORS
@@ -0,0 +1,2 @@
+opensource@google.com
+
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..a62dde7
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,28 @@
+Copyright (c) 2008, Google Inc.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+    * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+    * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..a7e4c29
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,6 @@
+2008-10-07  Google Inc. <opensource@google.com>
+
+	* google-glog: initial release:
+	The glog package contains a library that implements application-level
+	logging.  This library provides logging APIs based on C++-style
+	streams and various helper macros.
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..316e397
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,230 @@
+Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..0111d0f
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,172 @@
+## Process this file with automake to produce Makefile.in
+
+# Make sure that when we re-make ./configure, we get the macros we need
+ACLOCAL_AMFLAGS = -I m4
+
+# This is so we can #include <glog/foo>
+AM_CPPFLAGS = -I$(top_srcdir)/src
+
+# This is mostly based on configure options
+AM_CXXFLAGS =
+
+# These are good warnings to turn on by default
+if GCC
+AM_CXXFLAGS += -Wall -Wwrite-strings -Woverloaded-virtual -Wno-sign-compare
+endif
+
+# These are x86-specific, having to do with frame-pointers
+if X86_64
+if ENABLE_FRAME_POINTERS
+AM_CXXFLAGS += -fno-omit-frame-pointer
+else
+  # TODO(csilvers): check if -fomit-frame-pointer might be in $(CXXFLAGS),
+  #                 before setting this.
+AM_CXXFLAGS += -DNO_FRAME_POINTER
+endif
+endif
+
+glogincludedir = $(includedir)/glog
+## The .h files you want to install (that is, .h files that people
+## who install this package can include in their own applications.)
+gloginclude_HEADERS = src/glog/log_severity.h src/glog/logging.h src/glog/raw_logging.h src/glog/vlog_is_on.h src/glog/stl_logging.h
+
+docdir = $(prefix)/share/doc/$(PACKAGE)-$(VERSION)
+## This is for HTML and other documentation you want to install.
+## Add your documentation files (in doc/) in addition to these
+## top-level boilerplate files.  Also add a TODO file if you have one.
+dist_doc_DATA = AUTHORS COPYING ChangeLog INSTALL NEWS README \
+        doc/designstyle.css doc/glog.html
+
+## The libraries (.so's) you want to install
+lib_LTLIBRARIES =
+
+## unittests you want to run when people type 'make check'.
+## TESTS is for binary unittests, check_SCRIPTS for script-based unittests.
+## TESTS_ENVIRONMENT sets environment variables for when you run unittest,
+## but it only seems to take effect for *binary* unittests (argh!)
+TESTS =
+TESTS_ENVIRONMENT =
+check_SCRIPTS =
+# Every time you add a unittest to check_SCRIPTS, add it here too
+noinst_SCRIPTS =
+# Binaries used for script-based unittests.
+TEST_BINARIES =
+
+TESTS += logging_unittest
+logging_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                            src/logging_unittest.cc
+logging_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+check_SCRIPTS += logging_striplog_test_sh
+noinst_SCRIPTS += src/logging_striplog_test.sh
+logging_striplog_test_sh: logging_striptest0 logging_striptest2 logging_striptest10
+	$(top_srcdir)/src/logging_striplog_test.sh
+
+check_SCRIPTS += demangle_unittest_sh
+noinst_SCRIPTS += src/demangle_unittest.sh
+demangle_unittest_sh: demangle_unittest
+	$(top_srcdir)/demangle_unittest  # force to create lt-demangle_unittest
+	$(top_srcdir)/src/demangle_unittest.sh
+
+TEST_BINARIES += logging_striptest0
+logging_striptest0_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                             src/logging_striptest_main.cc
+logging_striptest0_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest0_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest0_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+TEST_BINARIES += logging_striptest2
+logging_striptest2_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                             src/logging_striptest2.cc
+logging_striptest2_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest2_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest2_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+TEST_BINARIES += logging_striptest10
+logging_striptest10_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                              src/logging_striptest10.cc
+logging_striptest10_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest10_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest10_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+TESTS += demangle_unittest
+demangle_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                            src/demangle_unittest.cc
+demangle_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+demangle_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+demangle_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+TESTS += stacktrace_unittest
+stacktrace_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                              src/stacktrace_unittest.cc
+stacktrace_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+TESTS += symbolize_unittest
+symbolize_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                              src/symbolize_unittest.cc
+symbolize_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+symbolize_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+symbolize_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+TESTS += stacktrace_framesizes_unittest
+stacktrace_framesizes_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                                         src/stacktrace_framesizes_unittest.cc
+stacktrace_framesizes_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_framesizes_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_framesizes_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+TESTS += stl_logging_unittest
+stl_logging_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                               src/stl_logging_unittest.cc
+stl_logging_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+stl_logging_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+stl_logging_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+
+## vvvv RULES TO MAKE THE LIBRARIES, BINARIES, AND UNITTESTS
+
+lib_LTLIBRARIES += libglog.la
+libglog_la_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                       src/logging.cc src/raw_logging.cc src/vlog_is_on.cc \
+                       src/utilities.cc src/utilities.h \
+	 	       src/demangle.cc src/demangle.h \
+                       src/stacktrace.cc src/stacktrace.h \
+                       src/stacktrace_generic-inl.h \
+                       src/stacktrace_libunwind-inl.h \
+                       src/stacktrace_powerpc-inl.h \
+                       src/stacktrace_x86-inl.h \
+                       src/stacktrace_x86_64-inl.h \
+                       src/symbolize.cc src/symbolize.h \
+                       src/base/mutex.h src/base/googleinit.h \
+                       src/base/commandlineflags.h src/googletest.h
+
+libglog_la_CXXFLAGS = $(PTRHEAD_CFLAGS) -DNDEBUG
+libglog_la_LDFLAGS = $(PTRHEAD_CFLAGS)
+libglog_la_LIBADD = $(PTHREAD_LIBS)
+
+## ^^^^ END OF RULES TO MAKE THE LIBRARIES, BINARIES, AND UNITTESTS
+
+
+## This should always include $(TESTS), but may also include other
+## binaries that you compile but don't want automatically installed.
+noinst_PROGRAMS = $(TESTS) $(TEST_BINARIES)
+
+rpm: dist-gzip packages/rpm.sh packages/rpm/rpm.spec
+	@cd packages && ./rpm.sh ${PACKAGE} ${VERSION}
+
+deb: dist-gzip packages/deb.sh packages/deb/*
+	@cd packages && ./deb.sh ${PACKAGE} ${VERSION}
+
+# TODO(hamaji): We don't support Visual Studio for now.
+## Windows wants write permission to .vcproj files and maybe even sln files.
+#dist-hook:
+#	test -e "$(distdir)/vsprojects" \
+#	   && chmod -R u+w $(distdir)/*.sln $(distdir)/vsprojects/
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+EXTRA_DIST = packages/rpm.sh packages/rpm/rpm.spec packages/deb.sh packages/deb \
+	$(SCRIPTS) src/logging_unittest.err src/demangle_unittest.txt
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..4419ed7
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,1185 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+
+# These are good warnings to turn on by default
+@GCC_TRUE@am__append_1 = -Wall -Wwrite-strings -Woverloaded-virtual -Wno-sign-compare
+
+# These are x86-specific, having to do with frame-pointers
+@ENABLE_FRAME_POINTERS_TRUE@@X86_64_TRUE@am__append_2 = -fno-omit-frame-pointer
+@ENABLE_FRAME_POINTERS_FALSE@@X86_64_TRUE@am__append_3 = -DNO_FRAME_POINTER
+noinst_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2)
+DIST_COMMON = README $(am__configure_deps) $(dist_doc_DATA) \
+	$(gloginclude_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	$(top_srcdir)/src/config.h.in \
+	$(top_srcdir)/src/glog/logging.h.in \
+	$(top_srcdir)/src/glog/raw_logging.h.in \
+	$(top_srcdir)/src/glog/stl_logging.h.in \
+	$(top_srcdir)/src/glog/vlog_is_on.h.in AUTHORS COPYING \
+	ChangeLog INSTALL NEWS compile config.guess config.sub depcomp \
+	install-sh ltmain.sh missing mkinstalldirs
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/ac_have_attribute.m4 \
+	$(top_srcdir)/m4/ac_have_builtin_expect.m4 \
+	$(top_srcdir)/m4/ac_rwlock.m4 $(top_srcdir)/m4/acx_pthread.m4 \
+	$(top_srcdir)/m4/google_namespace.m4 \
+	$(top_srcdir)/m4/namespaces.m4 \
+	$(top_srcdir)/m4/stl_namespace.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/config.h
+CONFIG_CLEAN_FILES = src/glog/logging.h src/glog/raw_logging.h \
+	src/glog/vlog_is_on.h src/glog/stl_logging.h
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" \
+	"$(DESTDIR)$(glogincludedir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+am__DEPENDENCIES_1 =
+libglog_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am__objects_1 =
+am_libglog_la_OBJECTS = $(am__objects_1) libglog_la-logging.lo \
+	libglog_la-raw_logging.lo libglog_la-vlog_is_on.lo \
+	libglog_la-utilities.lo libglog_la-demangle.lo \
+	libglog_la-stacktrace.lo libglog_la-symbolize.lo
+libglog_la_OBJECTS = $(am_libglog_la_OBJECTS)
+am__EXEEXT_1 = logging_unittest$(EXEEXT) demangle_unittest$(EXEEXT) \
+	stacktrace_unittest$(EXEEXT) symbolize_unittest$(EXEEXT) \
+	stacktrace_framesizes_unittest$(EXEEXT) \
+	stl_logging_unittest$(EXEEXT)
+am__EXEEXT_2 = logging_striptest0$(EXEEXT) logging_striptest2$(EXEEXT) \
+	logging_striptest10$(EXEEXT)
+PROGRAMS = $(noinst_PROGRAMS)
+am_demangle_unittest_OBJECTS = $(am__objects_1) \
+	demangle_unittest-demangle_unittest.$(OBJEXT)
+demangle_unittest_OBJECTS = $(am_demangle_unittest_OBJECTS)
+demangle_unittest_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+am_logging_striptest0_OBJECTS = $(am__objects_1) \
+	logging_striptest0-logging_striptest_main.$(OBJEXT)
+logging_striptest0_OBJECTS = $(am_logging_striptest0_OBJECTS)
+logging_striptest0_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+am_logging_striptest10_OBJECTS = $(am__objects_1) \
+	logging_striptest10-logging_striptest10.$(OBJEXT)
+logging_striptest10_OBJECTS = $(am_logging_striptest10_OBJECTS)
+logging_striptest10_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+am_logging_striptest2_OBJECTS = $(am__objects_1) \
+	logging_striptest2-logging_striptest2.$(OBJEXT)
+logging_striptest2_OBJECTS = $(am_logging_striptest2_OBJECTS)
+logging_striptest2_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+am_logging_unittest_OBJECTS = $(am__objects_1) \
+	logging_unittest-logging_unittest.$(OBJEXT)
+logging_unittest_OBJECTS = $(am_logging_unittest_OBJECTS)
+logging_unittest_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+am_stacktrace_framesizes_unittest_OBJECTS = $(am__objects_1) \
+	stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.$(OBJEXT)
+stacktrace_framesizes_unittest_OBJECTS =  \
+	$(am_stacktrace_framesizes_unittest_OBJECTS)
+stacktrace_framesizes_unittest_DEPENDENCIES = libglog.la \
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
+am_stacktrace_unittest_OBJECTS = $(am__objects_1) \
+	stacktrace_unittest-stacktrace_unittest.$(OBJEXT)
+stacktrace_unittest_OBJECTS = $(am_stacktrace_unittest_OBJECTS)
+stacktrace_unittest_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+am_stl_logging_unittest_OBJECTS = $(am__objects_1) \
+	stl_logging_unittest-stl_logging_unittest.$(OBJEXT)
+stl_logging_unittest_OBJECTS = $(am_stl_logging_unittest_OBJECTS)
+stl_logging_unittest_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+am_symbolize_unittest_OBJECTS = $(am__objects_1) \
+	symbolize_unittest-symbolize_unittest.$(OBJEXT)
+symbolize_unittest_OBJECTS = $(am_symbolize_unittest_OBJECTS)
+symbolize_unittest_DEPENDENCIES = libglog.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+SCRIPTS = $(noinst_SCRIPTS)
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libglog_la_SOURCES) $(demangle_unittest_SOURCES) \
+	$(logging_striptest0_SOURCES) $(logging_striptest10_SOURCES) \
+	$(logging_striptest2_SOURCES) $(logging_unittest_SOURCES) \
+	$(stacktrace_framesizes_unittest_SOURCES) \
+	$(stacktrace_unittest_SOURCES) $(stl_logging_unittest_SOURCES) \
+	$(symbolize_unittest_SOURCES)
+DIST_SOURCES = $(libglog_la_SOURCES) $(demangle_unittest_SOURCES) \
+	$(logging_striptest0_SOURCES) $(logging_striptest10_SOURCES) \
+	$(logging_striptest2_SOURCES) $(logging_unittest_SOURCES) \
+	$(stacktrace_framesizes_unittest_SOURCES) \
+	$(stacktrace_unittest_SOURCES) $(stl_logging_unittest_SOURCES) \
+	$(symbolize_unittest_SOURCES)
+dist_docDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(dist_doc_DATA)
+glogincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(gloginclude_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENABLE_FRAME_POINTERS_FALSE = @ENABLE_FRAME_POINTERS_FALSE@
+ENABLE_FRAME_POINTERS_TRUE = @ENABLE_FRAME_POINTERS_TRUE@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GCC_FALSE = @GCC_FALSE@
+GCC_TRUE = @GCC_TRUE@
+GFLAGS_LIBS = @GFLAGS_LIBS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+X86_64_FALSE = @X86_64_FALSE@
+X86_64_TRUE = @X86_64_TRUE@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+ac_cv___attribute___noreturn = @ac_cv___attribute___noreturn@
+ac_cv___attribute___printf_4_5 = @ac_cv___attribute___printf_4_5@
+ac_cv_have___builtin_expect = @ac_cv_have___builtin_expect@
+ac_cv_have___uint16 = @ac_cv_have___uint16@
+ac_cv_have_inttypes_h = @ac_cv_have_inttypes_h@
+ac_cv_have_libgflags = @ac_cv_have_libgflags@
+ac_cv_have_stdint_h = @ac_cv_have_stdint_h@
+ac_cv_have_systypes_h = @ac_cv_have_systypes_h@
+ac_cv_have_u_int16_t = @ac_cv_have_u_int16_t@
+ac_cv_have_uint16_t = @ac_cv_have_uint16_t@
+ac_google_end_namespace = @ac_google_end_namespace@
+ac_google_namespace = @ac_google_namespace@
+ac_google_start_namespace = @ac_google_start_namespace@
+acx_pthread_config = @acx_pthread_config@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+
+# Make sure that when we re-make ./configure, we get the macros we need
+ACLOCAL_AMFLAGS = -I m4
+
+# This is so we can #include <glog/foo>
+AM_CPPFLAGS = -I$(top_srcdir)/src
+
+# This is mostly based on configure options
+AM_CXXFLAGS = $(am__append_1) $(am__append_2) $(am__append_3)
+glogincludedir = $(includedir)/glog
+gloginclude_HEADERS = src/glog/log_severity.h src/glog/logging.h src/glog/raw_logging.h src/glog/vlog_is_on.h src/glog/stl_logging.h
+docdir = $(prefix)/share/doc/$(PACKAGE)-$(VERSION)
+dist_doc_DATA = AUTHORS COPYING ChangeLog INSTALL NEWS README \
+        doc/designstyle.css doc/glog.html
+
+lib_LTLIBRARIES = libglog.la
+TESTS = logging_unittest demangle_unittest stacktrace_unittest \
+	symbolize_unittest stacktrace_framesizes_unittest \
+	stl_logging_unittest
+TESTS_ENVIRONMENT = 
+check_SCRIPTS = logging_striplog_test_sh demangle_unittest_sh
+# Every time you add a unittest to check_SCRIPTS, add it here too
+noinst_SCRIPTS = src/logging_striplog_test.sh src/demangle_unittest.sh
+# Binaries used for script-based unittests.
+TEST_BINARIES = logging_striptest0 logging_striptest2 \
+	logging_striptest10
+logging_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                            src/logging_unittest.cc
+
+logging_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+logging_striptest0_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                             src/logging_striptest_main.cc
+
+logging_striptest0_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest0_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest0_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+logging_striptest2_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                             src/logging_striptest2.cc
+
+logging_striptest2_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest2_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest2_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+logging_striptest10_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                              src/logging_striptest10.cc
+
+logging_striptest10_CXXFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest10_LDFLAGS = $(PTHREAD_CFLAGS)
+logging_striptest10_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+demangle_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                            src/demangle_unittest.cc
+
+demangle_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+demangle_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+demangle_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+stacktrace_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                              src/stacktrace_unittest.cc
+
+stacktrace_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+symbolize_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                              src/symbolize_unittest.cc
+
+symbolize_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+symbolize_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+symbolize_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+stacktrace_framesizes_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                                         src/stacktrace_framesizes_unittest.cc
+
+stacktrace_framesizes_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_framesizes_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+stacktrace_framesizes_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+stl_logging_unittest_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                               src/stl_logging_unittest.cc
+
+stl_logging_unittest_CXXFLAGS = $(PTHREAD_CFLAGS)
+stl_logging_unittest_LDFLAGS = $(PTHREAD_CFLAGS)
+stl_logging_unittest_LDADD = libglog.la $(PTHREAD_LIBS) $(GFLAGS_LIBS)
+libglog_la_SOURCES = $(gloginclude_HEADERS) src/config.h \
+                       src/logging.cc src/raw_logging.cc src/vlog_is_on.cc \
+                       src/utilities.cc src/utilities.h \
+	 	       src/demangle.cc src/demangle.h \
+                       src/stacktrace.cc src/stacktrace.h \
+                       src/stacktrace_generic-inl.h \
+                       src/stacktrace_libunwind-inl.h \
+                       src/stacktrace_powerpc-inl.h \
+                       src/stacktrace_x86-inl.h \
+                       src/stacktrace_x86_64-inl.h \
+                       src/symbolize.cc src/symbolize.h \
+                       src/base/mutex.h src/base/googleinit.h \
+                       src/base/commandlineflags.h src/googletest.h
+
+libglog_la_CXXFLAGS = $(PTRHEAD_CFLAGS) -DNDEBUG
+libglog_la_LDFLAGS = $(PTRHEAD_CFLAGS)
+libglog_la_LIBADD = $(PTHREAD_LIBS)
+EXTRA_DIST = packages/rpm.sh packages/rpm/rpm.spec packages/deb.sh packages/deb \
+	$(SCRIPTS) src/logging_unittest.err src/demangle_unittest.txt
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .cc .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+src/config.h: src/stamp-h1
+	@if test ! -f $@; then \
+	  rm -f src/stamp-h1; \
+	  $(MAKE) src/stamp-h1; \
+	else :; fi
+
+src/stamp-h1: $(top_srcdir)/src/config.h.in $(top_builddir)/config.status
+	@rm -f src/stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status src/config.h
+$(top_srcdir)/src/config.h.in:  $(am__configure_deps) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	rm -f src/stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f src/config.h src/stamp-h1
+src/glog/logging.h: $(top_builddir)/config.status $(top_srcdir)/src/glog/logging.h.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+src/glog/raw_logging.h: $(top_builddir)/config.status $(top_srcdir)/src/glog/raw_logging.h.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+src/glog/vlog_is_on.h: $(top_builddir)/config.status $(top_srcdir)/src/glog/vlog_is_on.h.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+src/glog/stl_logging.h: $(top_builddir)/config.status $(top_srcdir)/src/glog/stl_logging.h.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    f=$(am__strip_dir) \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  p=$(am__strip_dir) \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libglog.la: $(libglog_la_OBJECTS) $(libglog_la_DEPENDENCIES) 
+	$(CXXLINK) -rpath $(libdir) $(libglog_la_LDFLAGS) $(libglog_la_OBJECTS) $(libglog_la_LIBADD) $(LIBS)
+
+clean-noinstPROGRAMS:
+	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  echo " rm -f $$p $$f"; \
+	  rm -f $$p $$f ; \
+	done
+demangle_unittest$(EXEEXT): $(demangle_unittest_OBJECTS) $(demangle_unittest_DEPENDENCIES) 
+	@rm -f demangle_unittest$(EXEEXT)
+	$(CXXLINK) $(demangle_unittest_LDFLAGS) $(demangle_unittest_OBJECTS) $(demangle_unittest_LDADD) $(LIBS)
+logging_striptest0$(EXEEXT): $(logging_striptest0_OBJECTS) $(logging_striptest0_DEPENDENCIES) 
+	@rm -f logging_striptest0$(EXEEXT)
+	$(CXXLINK) $(logging_striptest0_LDFLAGS) $(logging_striptest0_OBJECTS) $(logging_striptest0_LDADD) $(LIBS)
+logging_striptest10$(EXEEXT): $(logging_striptest10_OBJECTS) $(logging_striptest10_DEPENDENCIES) 
+	@rm -f logging_striptest10$(EXEEXT)
+	$(CXXLINK) $(logging_striptest10_LDFLAGS) $(logging_striptest10_OBJECTS) $(logging_striptest10_LDADD) $(LIBS)
+logging_striptest2$(EXEEXT): $(logging_striptest2_OBJECTS) $(logging_striptest2_DEPENDENCIES) 
+	@rm -f logging_striptest2$(EXEEXT)
+	$(CXXLINK) $(logging_striptest2_LDFLAGS) $(logging_striptest2_OBJECTS) $(logging_striptest2_LDADD) $(LIBS)
+logging_unittest$(EXEEXT): $(logging_unittest_OBJECTS) $(logging_unittest_DEPENDENCIES) 
+	@rm -f logging_unittest$(EXEEXT)
+	$(CXXLINK) $(logging_unittest_LDFLAGS) $(logging_unittest_OBJECTS) $(logging_unittest_LDADD) $(LIBS)
+stacktrace_framesizes_unittest$(EXEEXT): $(stacktrace_framesizes_unittest_OBJECTS) $(stacktrace_framesizes_unittest_DEPENDENCIES) 
+	@rm -f stacktrace_framesizes_unittest$(EXEEXT)
+	$(CXXLINK) $(stacktrace_framesizes_unittest_LDFLAGS) $(stacktrace_framesizes_unittest_OBJECTS) $(stacktrace_framesizes_unittest_LDADD) $(LIBS)
+stacktrace_unittest$(EXEEXT): $(stacktrace_unittest_OBJECTS) $(stacktrace_unittest_DEPENDENCIES) 
+	@rm -f stacktrace_unittest$(EXEEXT)
+	$(CXXLINK) $(stacktrace_unittest_LDFLAGS) $(stacktrace_unittest_OBJECTS) $(stacktrace_unittest_LDADD) $(LIBS)
+stl_logging_unittest$(EXEEXT): $(stl_logging_unittest_OBJECTS) $(stl_logging_unittest_DEPENDENCIES) 
+	@rm -f stl_logging_unittest$(EXEEXT)
+	$(CXXLINK) $(stl_logging_unittest_LDFLAGS) $(stl_logging_unittest_OBJECTS) $(stl_logging_unittest_LDADD) $(LIBS)
+symbolize_unittest$(EXEEXT): $(symbolize_unittest_OBJECTS) $(symbolize_unittest_DEPENDENCIES) 
+	@rm -f symbolize_unittest$(EXEEXT)
+	$(CXXLINK) $(symbolize_unittest_LDFLAGS) $(symbolize_unittest_OBJECTS) $(symbolize_unittest_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/demangle_unittest-demangle_unittest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libglog_la-demangle.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libglog_la-logging.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libglog_la-raw_logging.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libglog_la-stacktrace.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libglog_la-symbolize.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libglog_la-utilities.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libglog_la-vlog_is_on.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_striptest0-logging_striptest_main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_striptest10-logging_striptest10.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_striptest2-logging_striptest2.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging_unittest-logging_unittest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symbolize_unittest-symbolize_unittest.Po@am__quote@
+
+.cc.o:
+@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
+
+libglog_la-logging.lo: src/logging.cc
+@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -MT libglog_la-logging.lo -MD -MP -MF "$(DEPDIR)/libglog_la-logging.Tpo" -c -o libglog_la-logging.lo `test -f 'src/logging.cc' || echo '$(srcdir)/'`src/logging.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/libglog_la-logging.Tpo" "$(DEPDIR)/libglog_la-logging.Plo"; else rm -f "$(DEPDIR)/libglog_la-logging.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging.cc' object='libglog_la-logging.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -c -o libglog_la-logging.lo `test -f 'src/logging.cc' || echo '$(srcdir)/'`src/logging.cc
+
+libglog_la-raw_logging.lo: src/raw_logging.cc
+@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -MT libglog_la-raw_logging.lo -MD -MP -MF "$(DEPDIR)/libglog_la-raw_logging.Tpo" -c -o libglog_la-raw_logging.lo `test -f 'src/raw_logging.cc' || echo '$(srcdir)/'`src/raw_logging.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/libglog_la-raw_logging.Tpo" "$(DEPDIR)/libglog_la-raw_logging.Plo"; else rm -f "$(DEPDIR)/libglog_la-raw_logging.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/raw_logging.cc' object='libglog_la-raw_logging.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -c -o libglog_la-raw_logging.lo `test -f 'src/raw_logging.cc' || echo '$(srcdir)/'`src/raw_logging.cc
+
+libglog_la-vlog_is_on.lo: src/vlog_is_on.cc
+@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -MT libglog_la-vlog_is_on.lo -MD -MP -MF "$(DEPDIR)/libglog_la-vlog_is_on.Tpo" -c -o libglog_la-vlog_is_on.lo `test -f 'src/vlog_is_on.cc' || echo '$(srcdir)/'`src/vlog_is_on.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/libglog_la-vlog_is_on.Tpo" "$(DEPDIR)/libglog_la-vlog_is_on.Plo"; else rm -f "$(DEPDIR)/libglog_la-vlog_is_on.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/vlog_is_on.cc' object='libglog_la-vlog_is_on.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -c -o libglog_la-vlog_is_on.lo `test -f 'src/vlog_is_on.cc' || echo '$(srcdir)/'`src/vlog_is_on.cc
+
+libglog_la-utilities.lo: src/utilities.cc
+@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -MT libglog_la-utilities.lo -MD -MP -MF "$(DEPDIR)/libglog_la-utilities.Tpo" -c -o libglog_la-utilities.lo `test -f 'src/utilities.cc' || echo '$(srcdir)/'`src/utilities.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/libglog_la-utilities.Tpo" "$(DEPDIR)/libglog_la-utilities.Plo"; else rm -f "$(DEPDIR)/libglog_la-utilities.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/utilities.cc' object='libglog_la-utilities.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -c -o libglog_la-utilities.lo `test -f 'src/utilities.cc' || echo '$(srcdir)/'`src/utilities.cc
+
+libglog_la-demangle.lo: src/demangle.cc
+@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -MT libglog_la-demangle.lo -MD -MP -MF "$(DEPDIR)/libglog_la-demangle.Tpo" -c -o libglog_la-demangle.lo `test -f 'src/demangle.cc' || echo '$(srcdir)/'`src/demangle.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/libglog_la-demangle.Tpo" "$(DEPDIR)/libglog_la-demangle.Plo"; else rm -f "$(DEPDIR)/libglog_la-demangle.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/demangle.cc' object='libglog_la-demangle.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -c -o libglog_la-demangle.lo `test -f 'src/demangle.cc' || echo '$(srcdir)/'`src/demangle.cc
+
+libglog_la-stacktrace.lo: src/stacktrace.cc
+@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -MT libglog_la-stacktrace.lo -MD -MP -MF "$(DEPDIR)/libglog_la-stacktrace.Tpo" -c -o libglog_la-stacktrace.lo `test -f 'src/stacktrace.cc' || echo '$(srcdir)/'`src/stacktrace.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/libglog_la-stacktrace.Tpo" "$(DEPDIR)/libglog_la-stacktrace.Plo"; else rm -f "$(DEPDIR)/libglog_la-stacktrace.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/stacktrace.cc' object='libglog_la-stacktrace.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -c -o libglog_la-stacktrace.lo `test -f 'src/stacktrace.cc' || echo '$(srcdir)/'`src/stacktrace.cc
+
+libglog_la-symbolize.lo: src/symbolize.cc
+@am__fastdepCXX_TRUE@	if $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -MT libglog_la-symbolize.lo -MD -MP -MF "$(DEPDIR)/libglog_la-symbolize.Tpo" -c -o libglog_la-symbolize.lo `test -f 'src/symbolize.cc' || echo '$(srcdir)/'`src/symbolize.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/libglog_la-symbolize.Tpo" "$(DEPDIR)/libglog_la-symbolize.Plo"; else rm -f "$(DEPDIR)/libglog_la-symbolize.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/symbolize.cc' object='libglog_la-symbolize.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libglog_la_CXXFLAGS) $(CXXFLAGS) -c -o libglog_la-symbolize.lo `test -f 'src/symbolize.cc' || echo '$(srcdir)/'`src/symbolize.cc
+
+demangle_unittest-demangle_unittest.o: src/demangle_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(demangle_unittest_CXXFLAGS) $(CXXFLAGS) -MT demangle_unittest-demangle_unittest.o -MD -MP -MF "$(DEPDIR)/demangle_unittest-demangle_unittest.Tpo" -c -o demangle_unittest-demangle_unittest.o `test -f 'src/demangle_unittest.cc' || echo '$(srcdir)/'`src/demangle_unittest.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/demangle_unittest-demangle_unittest.Tpo" "$(DEPDIR)/demangle_unittest-demangle_unittest.Po"; else rm -f "$(DEPDIR)/demangle_unittest-demangle_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/demangle_unittest.cc' object='demangle_unittest-demangle_unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(demangle_unittest_CXXFLAGS) $(CXXFLAGS) -c -o demangle_unittest-demangle_unittest.o `test -f 'src/demangle_unittest.cc' || echo '$(srcdir)/'`src/demangle_unittest.cc
+
+demangle_unittest-demangle_unittest.obj: src/demangle_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(demangle_unittest_CXXFLAGS) $(CXXFLAGS) -MT demangle_unittest-demangle_unittest.obj -MD -MP -MF "$(DEPDIR)/demangle_unittest-demangle_unittest.Tpo" -c -o demangle_unittest-demangle_unittest.obj `if test -f 'src/demangle_unittest.cc'; then $(CYGPATH_W) 'src/demangle_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/demangle_unittest.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/demangle_unittest-demangle_unittest.Tpo" "$(DEPDIR)/demangle_unittest-demangle_unittest.Po"; else rm -f "$(DEPDIR)/demangle_unittest-demangle_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/demangle_unittest.cc' object='demangle_unittest-demangle_unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(demangle_unittest_CXXFLAGS) $(CXXFLAGS) -c -o demangle_unittest-demangle_unittest.obj `if test -f 'src/demangle_unittest.cc'; then $(CYGPATH_W) 'src/demangle_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/demangle_unittest.cc'; fi`
+
+logging_striptest0-logging_striptest_main.o: src/logging_striptest_main.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest0_CXXFLAGS) $(CXXFLAGS) -MT logging_striptest0-logging_striptest_main.o -MD -MP -MF "$(DEPDIR)/logging_striptest0-logging_striptest_main.Tpo" -c -o logging_striptest0-logging_striptest_main.o `test -f 'src/logging_striptest_main.cc' || echo '$(srcdir)/'`src/logging_striptest_main.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_striptest0-logging_striptest_main.Tpo" "$(DEPDIR)/logging_striptest0-logging_striptest_main.Po"; else rm -f "$(DEPDIR)/logging_striptest0-logging_striptest_main.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_striptest_main.cc' object='logging_striptest0-logging_striptest_main.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest0_CXXFLAGS) $(CXXFLAGS) -c -o logging_striptest0-logging_striptest_main.o `test -f 'src/logging_striptest_main.cc' || echo '$(srcdir)/'`src/logging_striptest_main.cc
+
+logging_striptest0-logging_striptest_main.obj: src/logging_striptest_main.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest0_CXXFLAGS) $(CXXFLAGS) -MT logging_striptest0-logging_striptest_main.obj -MD -MP -MF "$(DEPDIR)/logging_striptest0-logging_striptest_main.Tpo" -c -o logging_striptest0-logging_striptest_main.obj `if test -f 'src/logging_striptest_main.cc'; then $(CYGPATH_W) 'src/logging_striptest_main.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_striptest_main.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_striptest0-logging_striptest_main.Tpo" "$(DEPDIR)/logging_striptest0-logging_striptest_main.Po"; else rm -f "$(DEPDIR)/logging_striptest0-logging_striptest_main.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_striptest_main.cc' object='logging_striptest0-logging_striptest_main.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest0_CXXFLAGS) $(CXXFLAGS) -c -o logging_striptest0-logging_striptest_main.obj `if test -f 'src/logging_striptest_main.cc'; then $(CYGPATH_W) 'src/logging_striptest_main.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_striptest_main.cc'; fi`
+
+logging_striptest10-logging_striptest10.o: src/logging_striptest10.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest10_CXXFLAGS) $(CXXFLAGS) -MT logging_striptest10-logging_striptest10.o -MD -MP -MF "$(DEPDIR)/logging_striptest10-logging_striptest10.Tpo" -c -o logging_striptest10-logging_striptest10.o `test -f 'src/logging_striptest10.cc' || echo '$(srcdir)/'`src/logging_striptest10.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_striptest10-logging_striptest10.Tpo" "$(DEPDIR)/logging_striptest10-logging_striptest10.Po"; else rm -f "$(DEPDIR)/logging_striptest10-logging_striptest10.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_striptest10.cc' object='logging_striptest10-logging_striptest10.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest10_CXXFLAGS) $(CXXFLAGS) -c -o logging_striptest10-logging_striptest10.o `test -f 'src/logging_striptest10.cc' || echo '$(srcdir)/'`src/logging_striptest10.cc
+
+logging_striptest10-logging_striptest10.obj: src/logging_striptest10.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest10_CXXFLAGS) $(CXXFLAGS) -MT logging_striptest10-logging_striptest10.obj -MD -MP -MF "$(DEPDIR)/logging_striptest10-logging_striptest10.Tpo" -c -o logging_striptest10-logging_striptest10.obj `if test -f 'src/logging_striptest10.cc'; then $(CYGPATH_W) 'src/logging_striptest10.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_striptest10.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_striptest10-logging_striptest10.Tpo" "$(DEPDIR)/logging_striptest10-logging_striptest10.Po"; else rm -f "$(DEPDIR)/logging_striptest10-logging_striptest10.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_striptest10.cc' object='logging_striptest10-logging_striptest10.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest10_CXXFLAGS) $(CXXFLAGS) -c -o logging_striptest10-logging_striptest10.obj `if test -f 'src/logging_striptest10.cc'; then $(CYGPATH_W) 'src/logging_striptest10.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_striptest10.cc'; fi`
+
+logging_striptest2-logging_striptest2.o: src/logging_striptest2.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest2_CXXFLAGS) $(CXXFLAGS) -MT logging_striptest2-logging_striptest2.o -MD -MP -MF "$(DEPDIR)/logging_striptest2-logging_striptest2.Tpo" -c -o logging_striptest2-logging_striptest2.o `test -f 'src/logging_striptest2.cc' || echo '$(srcdir)/'`src/logging_striptest2.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_striptest2-logging_striptest2.Tpo" "$(DEPDIR)/logging_striptest2-logging_striptest2.Po"; else rm -f "$(DEPDIR)/logging_striptest2-logging_striptest2.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_striptest2.cc' object='logging_striptest2-logging_striptest2.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest2_CXXFLAGS) $(CXXFLAGS) -c -o logging_striptest2-logging_striptest2.o `test -f 'src/logging_striptest2.cc' || echo '$(srcdir)/'`src/logging_striptest2.cc
+
+logging_striptest2-logging_striptest2.obj: src/logging_striptest2.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest2_CXXFLAGS) $(CXXFLAGS) -MT logging_striptest2-logging_striptest2.obj -MD -MP -MF "$(DEPDIR)/logging_striptest2-logging_striptest2.Tpo" -c -o logging_striptest2-logging_striptest2.obj `if test -f 'src/logging_striptest2.cc'; then $(CYGPATH_W) 'src/logging_striptest2.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_striptest2.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_striptest2-logging_striptest2.Tpo" "$(DEPDIR)/logging_striptest2-logging_striptest2.Po"; else rm -f "$(DEPDIR)/logging_striptest2-logging_striptest2.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_striptest2.cc' object='logging_striptest2-logging_striptest2.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_striptest2_CXXFLAGS) $(CXXFLAGS) -c -o logging_striptest2-logging_striptest2.obj `if test -f 'src/logging_striptest2.cc'; then $(CYGPATH_W) 'src/logging_striptest2.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_striptest2.cc'; fi`
+
+logging_unittest-logging_unittest.o: src/logging_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_unittest_CXXFLAGS) $(CXXFLAGS) -MT logging_unittest-logging_unittest.o -MD -MP -MF "$(DEPDIR)/logging_unittest-logging_unittest.Tpo" -c -o logging_unittest-logging_unittest.o `test -f 'src/logging_unittest.cc' || echo '$(srcdir)/'`src/logging_unittest.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_unittest-logging_unittest.Tpo" "$(DEPDIR)/logging_unittest-logging_unittest.Po"; else rm -f "$(DEPDIR)/logging_unittest-logging_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_unittest.cc' object='logging_unittest-logging_unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_unittest_CXXFLAGS) $(CXXFLAGS) -c -o logging_unittest-logging_unittest.o `test -f 'src/logging_unittest.cc' || echo '$(srcdir)/'`src/logging_unittest.cc
+
+logging_unittest-logging_unittest.obj: src/logging_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_unittest_CXXFLAGS) $(CXXFLAGS) -MT logging_unittest-logging_unittest.obj -MD -MP -MF "$(DEPDIR)/logging_unittest-logging_unittest.Tpo" -c -o logging_unittest-logging_unittest.obj `if test -f 'src/logging_unittest.cc'; then $(CYGPATH_W) 'src/logging_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_unittest.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/logging_unittest-logging_unittest.Tpo" "$(DEPDIR)/logging_unittest-logging_unittest.Po"; else rm -f "$(DEPDIR)/logging_unittest-logging_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/logging_unittest.cc' object='logging_unittest-logging_unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(logging_unittest_CXXFLAGS) $(CXXFLAGS) -c -o logging_unittest-logging_unittest.obj `if test -f 'src/logging_unittest.cc'; then $(CYGPATH_W) 'src/logging_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/logging_unittest.cc'; fi`
+
+stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.o: src/stacktrace_framesizes_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_framesizes_unittest_CXXFLAGS) $(CXXFLAGS) -MT stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.o -MD -MP -MF "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Tpo" -c -o stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.o `test -f 'src/stacktrace_framesizes_unittest.cc' || echo '$(srcdir)/'`src/stacktrace_framesizes_unittest.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Tpo" "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Po"; else rm -f "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/stacktrace_framesizes_unittest.cc' object='stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_framesizes_unittest_CXXFLAGS) $(CXXFLAGS) -c -o stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.o `test -f 'src/stacktrace_framesizes_unittest.cc' || echo '$(srcdir)/'`src/stacktrace_framesizes_unittest.cc
+
+stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.obj: src/stacktrace_framesizes_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_framesizes_unittest_CXXFLAGS) $(CXXFLAGS) -MT stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.obj -MD -MP -MF "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Tpo" -c -o stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.obj `if test -f 'src/stacktrace_framesizes_unittest.cc'; then $(CYGPATH_W) 'src/stacktrace_framesizes_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/stacktrace_framesizes_unittest.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Tpo" "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Po"; else rm -f "$(DEPDIR)/stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/stacktrace_framesizes_unittest.cc' object='stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_framesizes_unittest_CXXFLAGS) $(CXXFLAGS) -c -o stacktrace_framesizes_unittest-stacktrace_framesizes_unittest.obj `if test -f 'src/stacktrace_framesizes_unittest.cc'; then $(CYGPATH_W) 'src/stacktrace_framesizes_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/stacktrace_framesizes_unittest.cc'; fi`
+
+stacktrace_unittest-stacktrace_unittest.o: src/stacktrace_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_unittest_CXXFLAGS) $(CXXFLAGS) -MT stacktrace_unittest-stacktrace_unittest.o -MD -MP -MF "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Tpo" -c -o stacktrace_unittest-stacktrace_unittest.o `test -f 'src/stacktrace_unittest.cc' || echo '$(srcdir)/'`src/stacktrace_unittest.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Tpo" "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Po"; else rm -f "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/stacktrace_unittest.cc' object='stacktrace_unittest-stacktrace_unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_unittest_CXXFLAGS) $(CXXFLAGS) -c -o stacktrace_unittest-stacktrace_unittest.o `test -f 'src/stacktrace_unittest.cc' || echo '$(srcdir)/'`src/stacktrace_unittest.cc
+
+stacktrace_unittest-stacktrace_unittest.obj: src/stacktrace_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_unittest_CXXFLAGS) $(CXXFLAGS) -MT stacktrace_unittest-stacktrace_unittest.obj -MD -MP -MF "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Tpo" -c -o stacktrace_unittest-stacktrace_unittest.obj `if test -f 'src/stacktrace_unittest.cc'; then $(CYGPATH_W) 'src/stacktrace_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/stacktrace_unittest.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Tpo" "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Po"; else rm -f "$(DEPDIR)/stacktrace_unittest-stacktrace_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/stacktrace_unittest.cc' object='stacktrace_unittest-stacktrace_unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stacktrace_unittest_CXXFLAGS) $(CXXFLAGS) -c -o stacktrace_unittest-stacktrace_unittest.obj `if test -f 'src/stacktrace_unittest.cc'; then $(CYGPATH_W) 'src/stacktrace_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/stacktrace_unittest.cc'; fi`
+
+stl_logging_unittest-stl_logging_unittest.o: src/stl_logging_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stl_logging_unittest_CXXFLAGS) $(CXXFLAGS) -MT stl_logging_unittest-stl_logging_unittest.o -MD -MP -MF "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Tpo" -c -o stl_logging_unittest-stl_logging_unittest.o `test -f 'src/stl_logging_unittest.cc' || echo '$(srcdir)/'`src/stl_logging_unittest.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Tpo" "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Po"; else rm -f "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/stl_logging_unittest.cc' object='stl_logging_unittest-stl_logging_unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stl_logging_unittest_CXXFLAGS) $(CXXFLAGS) -c -o stl_logging_unittest-stl_logging_unittest.o `test -f 'src/stl_logging_unittest.cc' || echo '$(srcdir)/'`src/stl_logging_unittest.cc
+
+stl_logging_unittest-stl_logging_unittest.obj: src/stl_logging_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stl_logging_unittest_CXXFLAGS) $(CXXFLAGS) -MT stl_logging_unittest-stl_logging_unittest.obj -MD -MP -MF "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Tpo" -c -o stl_logging_unittest-stl_logging_unittest.obj `if test -f 'src/stl_logging_unittest.cc'; then $(CYGPATH_W) 'src/stl_logging_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/stl_logging_unittest.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Tpo" "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Po"; else rm -f "$(DEPDIR)/stl_logging_unittest-stl_logging_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/stl_logging_unittest.cc' object='stl_logging_unittest-stl_logging_unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(stl_logging_unittest_CXXFLAGS) $(CXXFLAGS) -c -o stl_logging_unittest-stl_logging_unittest.obj `if test -f 'src/stl_logging_unittest.cc'; then $(CYGPATH_W) 'src/stl_logging_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/stl_logging_unittest.cc'; fi`
+
+symbolize_unittest-symbolize_unittest.o: src/symbolize_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(symbolize_unittest_CXXFLAGS) $(CXXFLAGS) -MT symbolize_unittest-symbolize_unittest.o -MD -MP -MF "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Tpo" -c -o symbolize_unittest-symbolize_unittest.o `test -f 'src/symbolize_unittest.cc' || echo '$(srcdir)/'`src/symbolize_unittest.cc; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Tpo" "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Po"; else rm -f "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/symbolize_unittest.cc' object='symbolize_unittest-symbolize_unittest.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(symbolize_unittest_CXXFLAGS) $(CXXFLAGS) -c -o symbolize_unittest-symbolize_unittest.o `test -f 'src/symbolize_unittest.cc' || echo '$(srcdir)/'`src/symbolize_unittest.cc
+
+symbolize_unittest-symbolize_unittest.obj: src/symbolize_unittest.cc
+@am__fastdepCXX_TRUE@	if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(symbolize_unittest_CXXFLAGS) $(CXXFLAGS) -MT symbolize_unittest-symbolize_unittest.obj -MD -MP -MF "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Tpo" -c -o symbolize_unittest-symbolize_unittest.obj `if test -f 'src/symbolize_unittest.cc'; then $(CYGPATH_W) 'src/symbolize_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/symbolize_unittest.cc'; fi`; \
+@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Tpo" "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Po"; else rm -f "$(DEPDIR)/symbolize_unittest-symbolize_unittest.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='src/symbolize_unittest.cc' object='symbolize_unittest-symbolize_unittest.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(symbolize_unittest_CXXFLAGS) $(CXXFLAGS) -c -o symbolize_unittest-symbolize_unittest.obj `if test -f 'src/symbolize_unittest.cc'; then $(CYGPATH_W) 'src/symbolize_unittest.cc'; else $(CYGPATH_W) '$(srcdir)/src/symbolize_unittest.cc'; fi`
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-dist_docDATA: $(dist_doc_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(docdir)" || $(mkdir_p) "$(DESTDIR)$(docdir)"
+	@list='$(dist_doc_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(dist_docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
+	  $(dist_docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
+	done
+
+uninstall-dist_docDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_doc_DATA)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
+	done
+install-glogincludeHEADERS: $(gloginclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(glogincludedir)" || $(mkdir_p) "$(DESTDIR)$(glogincludedir)"
+	@list='$(gloginclude_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(glogincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(glogincludedir)/$$f'"; \
+	  $(glogincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(glogincludedir)/$$f"; \
+	done
+
+uninstall-glogincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(gloginclude_HEADERS)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(glogincludedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(glogincludedir)/$$f"; \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
+	srcdir=$(srcdir); export srcdir; \
+	list='$(TESTS)'; \
+	if test -n "$$list"; then \
+	  for tst in $$list; do \
+	    if test -f ./$$tst; then dir=./; \
+	    elif test -f $$tst; then dir=; \
+	    else dir="$(srcdir)/"; fi; \
+	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+	      all=`expr $$all + 1`; \
+	      case " $(XFAIL_TESTS) " in \
+	      *" $$tst "*) \
+		xpass=`expr $$xpass + 1`; \
+		failed=`expr $$failed + 1`; \
+		echo "XPASS: $$tst"; \
+	      ;; \
+	      *) \
+		echo "PASS: $$tst"; \
+	      ;; \
+	      esac; \
+	    elif test $$? -ne 77; then \
+	      all=`expr $$all + 1`; \
+	      case " $(XFAIL_TESTS) " in \
+	      *" $$tst "*) \
+		xfail=`expr $$xfail + 1`; \
+		echo "XFAIL: $$tst"; \
+	      ;; \
+	      *) \
+		failed=`expr $$failed + 1`; \
+		echo "FAIL: $$tst"; \
+	      ;; \
+	      esac; \
+	    else \
+	      skip=`expr $$skip + 1`; \
+	      echo "SKIP: $$tst"; \
+	    fi; \
+	  done; \
+	  if test "$$failed" -eq 0; then \
+	    if test "$$xfail" -eq 0; then \
+	      banner="All $$all tests passed"; \
+	    else \
+	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
+	    fi; \
+	  else \
+	    if test "$$xpass" -eq 0; then \
+	      banner="$$failed of $$all tests failed"; \
+	    else \
+	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
+	    fi; \
+	  fi; \
+	  dashes="$$banner"; \
+	  skipped=""; \
+	  if test "$$skip" -ne 0; then \
+	    skipped="($$skip tests were not run)"; \
+	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+	      dashes="$$skipped"; \
+	  fi; \
+	  report=""; \
+	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+	    report="Please report to $(PACKAGE_BUGREPORT)"; \
+	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+	      dashes="$$report"; \
+	  fi; \
+	  dashes=`echo "$$dashes" | sed s/./=/g`; \
+	  echo "$$dashes"; \
+	  echo "$$banner"; \
+	  test -z "$$skipped" || echo "$$skipped"; \
+	  test -z "$$report" || echo "$$report"; \
+	  echo "$$dashes"; \
+	  test "$$failed" -eq 0; \
+	else :; fi
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	$(mkdir_p) $(distdir)/doc $(distdir)/m4 $(distdir)/packages $(distdir)/packages/rpm $(distdir)/src $(distdir)/src/glog
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
+		$(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(glogincludedir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	clean-noinstPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-dist_docDATA install-glogincludeHEADERS
+
+install-exec-am: install-libLTLIBRARIES
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_docDATA uninstall-glogincludeHEADERS \
+	uninstall-info-am uninstall-libLTLIBRARIES
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-TESTS check-am \
+	clean clean-generic clean-libLTLIBRARIES clean-libtool \
+	clean-noinstPROGRAMS ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-shar dist-tarZ dist-zip distcheck distclean \
+	distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-dist_docDATA install-exec install-exec-am \
+	install-glogincludeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-dist_docDATA \
+	uninstall-glogincludeHEADERS uninstall-info-am \
+	uninstall-libLTLIBRARIES
+
+@ENABLE_FRAME_POINTERS_FALSE@@X86_64_TRUE@  # TODO(csilvers): check if -fomit-frame-pointer might be in $(CXXFLAGS),
+@ENABLE_FRAME_POINTERS_FALSE@@X86_64_TRUE@  #                 before setting this.
+logging_striplog_test_sh: logging_striptest0 logging_striptest2 logging_striptest10
+	$(top_srcdir)/src/logging_striplog_test.sh
+demangle_unittest_sh: demangle_unittest
+	$(top_srcdir)/demangle_unittest  # force to create lt-demangle_unittest
+	$(top_srcdir)/src/demangle_unittest.sh
+
+rpm: dist-gzip packages/rpm.sh packages/rpm/rpm.spec
+	@cd packages && ./rpm.sh ${PACKAGE} ${VERSION}
+
+deb: dist-gzip packages/deb.sh packages/deb/*
+	@cd packages && ./deb.sh ${PACKAGE} ${VERSION}
+
+# TODO(hamaji): We don't support Visual Studio for now.
+#dist-hook:
+#	test -e "$(distdir)/vsprojects" \
+#	   && chmod -R u+w $(distdir)/*.sln $(distdir)/vsprojects/
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/NEWS
diff --git a/README b/README
new file mode 100644
index 0000000..77efd37
--- /dev/null
+++ b/README
@@ -0,0 +1,5 @@
+This repository contains a C++ implementation of the Google logging
+module.  Documentation for the implementation is in doc/.
+
+See INSTALL for (generic) installation instructions for C++: basically
+   ./configure && make && make install
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..80f53e0
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,7274 @@
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+
+# serial 48 Debian 1.5.22-2 AC_PROG_LIBTOOL
+
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+         [],
+         [m4_define([AC_PROVIDE_IFELSE],
+	         [m4_ifdef([AC_PROVIDE_$1],
+		           [$2], [$3])])])
+
+
+# AC_PROG_LIBTOOL
+# ---------------
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+  AC_PROVIDE_IFELSE([AC_PROG_CXX],
+    [AC_LIBTOOL_CXX],
+    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+  ])])
+dnl And a similar setup for Fortran 77 support
+  AC_PROVIDE_IFELSE([AC_PROG_F77],
+    [AC_LIBTOOL_F77],
+    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+    [AC_LIBTOOL_GCJ],
+    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+      [AC_LIBTOOL_GCJ],
+      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+	[AC_LIBTOOL_GCJ],
+      [ifdef([AC_PROG_GCJ],
+	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([A][M_PROG_GCJ],
+	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+       ifdef([LT_AC_PROG_GCJ],
+	     [define([LT_AC_PROG_GCJ],
+		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])# _AC_PROG_LIBTOOL
+
+
+# AC_LIBTOOL_SETUP
+# ----------------
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.50)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
+
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_PROG_ECHO_BACKSLASH
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    AC_PATH_MAGIC
+  fi
+  ;;
+esac
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+
+AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+AC_ARG_WITH([pic],
+    [AC_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
+
+
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+AC_DEFUN([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+AC_DEFUN([_LT_COMPILER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+AC_DEFUN([_LT_LINKER_BOILERPLATE],
+[ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+])# _LT_LINKER_BOILERPLATE
+
+
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
+
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[_LT_AC_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+[$]*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "[$]0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(ECHO)
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+    [AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+  ])
+esac
+
+need_locks="$enable_libtool_lock"
+
+])# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$5], , :, [$5])
+else
+    ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
+
+
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                          [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    ifelse([$4], , :, [$4])
+else
+    ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
+
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    # If test is not a shell built-in, we'll probably end up computing a
+    # maximum length that is only half of the actual maximum length, but
+    # we can't tell.
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	    lt_cv_sys_max_cmd_len=$new_result &&
+	    test $i != 17 # 1/2 MB should be enough
+    do
+      i=`expr $i + 1`
+      teststring=$teststring$teststring
+    done
+    teststring=
+    # Add a significant safety factor because C++ compilers can tack on massive
+    # amounts of additional arguments before passing them to the linker.
+    # It appears as though 1/2 is a usable value.
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# ------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ---------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}]
+EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+
+
+# AC_LIBTOOL_DLOPEN_SELF
+# ----------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+   ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+    	  lt_cv_dlopen_self_static, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+
+
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+])
+])# AC_LIBTOOL_PROG_CC_C_O
+
+
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
+
+hard_links="nottested"
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+
+
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
+
+
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
+   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         AC_MSG_RESULT([yes])
+       else
+  AC_MSG_RESULT([no])
+fi
+       ;;
+   *)
+  AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
+
+
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[123]]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_ARG_WITH([tags],
+    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+        [include additional configurations @<:@automatic@:>@])],
+    [tagnames="$withval"])
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    AC_MSG_WARN([output file `$ofile' does not exist])
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+    else
+      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+    fi
+  fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+    "") ;;
+    *)  AC_MSG_ERROR([invalid tag name: $tagname])
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      AC_MSG_ERROR([tag name \"$tagname\" already exists])
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  AC_LIBTOOL_LANG_CXX_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+	  AC_LIBTOOL_LANG_F77_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+	  AC_LIBTOOL_LANG_GCJ_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+	AC_LIBTOOL_LANG_RC_CONFIG
+	;;
+
+      *)
+	AC_MSG_ERROR([Unsupported tag name: $tagname])
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    AC_MSG_ERROR([unable to update list of available tagged configurations.])
+  fi
+fi
+])# _LT_AC_TAGCONFIG
+
+
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
+
+
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 DLLs
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
+
+
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
+
+
+# AC_DISABLE_SHARED
+# -----------------
+# set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
+
+
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
+
+
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
+
+
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
+
+
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
+
+
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi])
+ EGREP=$ac_cv_prog_egrep
+ AC_SUBST([EGREP])
+])])
+
+
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
+
+
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# AC_PATH_MAGIC
+
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+    [AC_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
+
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+])# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | kfreebsd*-gnu | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix3*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then 
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+
+
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+])# AC_CHECK_LIBM
+
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!).  If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+  esac
+  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+  AC_CHECK_LIB(ltdl, lt_dlinit,
+  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+  [if test x"$enable_ltdl_install" = xno; then
+     AC_MSG_WARN([libltdl not installed, but installation disabled])
+   else
+     enable_ltdl_install=yes
+   fi
+  ])
+  if test x"$enable_ltdl_install" = x"yes"; then
+    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+  else
+    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+    LIBLTDL="-lltdl"
+    LTDLINCL=
+  fi
+  # For backwards non-gettext consistent compatibility...
+  INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+
+# _LT_AC_PROG_CXXCPP
+# ------------------
+AC_DEFUN([_LT_AC_PROG_CXXCPP],
+[
+AC_REQUIRE([AC_PROG_CXX])
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+fi
+])# _LT_AC_PROG_CXXCPP
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# -------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF
+
+# Report which library types will actually be built
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+    ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
+
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([_LT_AC_PROG_CXXCPP])
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  $as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  $as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+  AC_PROG_LD
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+	;;
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    _LT_AC_TAGVAR(archive_cmds, $1)=''
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[[012]]|aix4.[[012]].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	else
+	  # We have old collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	fi
+	;;
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      _LT_AC_SYS_LIBPATH_AIX
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+      else
+	# Determine the default libpath from the value encoded in an empty executable.
+	_LT_AC_SYS_LIBPATH_AIX
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	# Exported symbols can be pulled into shared objects from archives
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	# This is similar to how AIX traditionally builds its shared libraries.
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+    ;;
+
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+    # as there is no search path for DLLs.
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+    _LT_AC_TAGVAR(always_export_symbols, $1)=no
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      ghcx*)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  freebsd[[12]]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  freebsd-elf*)
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    ;;
+  freebsd* | kfreebsd*-gnu | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC*)
+      # FIXME: insert proper C++ library support
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    aCC*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+      case $host_cpu in
+      hppa*64*|ia64*)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+        ;;
+      *)
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        ;;
+      esac
+    fi
+    case $host_cpu in
+    hppa*64*|ia64*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+    *)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case $host_cpu in
+	    hppa*64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  interix3*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC*)
+	# SGI C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	  else
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+	;;
+    esac
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+    ;;
+  linux*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc*)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC*)
+        # Portland Group C++ compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
+	# Compaq C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  openbsd*)
+    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx*)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      cxx*)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      lcc*)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.2, 5.x and Centerline C++
+        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	case $host_os in
+	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	  *)
+	    # The C++ compiler is used as linker so we must use $wl
+	    # flag to pass the commands to the underlying system
+	    # linker. We must also pass each convience library through
+	    # to the system linker between allextract/defaultextract.
+	    # The C++ compiler will combine linker options so we
+	    # cannot just pass the convience library names through
+	    # without $wl.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+	    ;;
+	esac
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+	output_verbose_link_cmd='echo'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx*)
+	# Green Hills C++ Compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	fi
+	;;
+    esac
+    ;;
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC*)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+    ;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$rm -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+ifelse([$1],[CXX],
+[case $host_os in
+interix3*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_AC_TAGVAR(predep_objects,$1)=
+  _LT_AC_TAGVAR(postdep_objects,$1)=
+  _LT_AC_TAGVAR(postdeps,$1)=
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+AC_MSG_RESULT([$enable_shared])
+
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# -------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+AC_LIBTOOL_CONFIG($1)
+
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars.  Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    _LT_AC_TAGVAR(compiler, $1) \
+    _LT_AC_TAGVAR(CC, $1) \
+    _LT_AC_TAGVAR(LD, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+    _LT_AC_TAGVAR(old_archive_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+    _LT_AC_TAGVAR(predep_objects, $1) \
+    _LT_AC_TAGVAR(postdep_objects, $1) \
+    _LT_AC_TAGVAR(predeps, $1) \
+    _LT_AC_TAGVAR(postdeps, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(archive_cmds, $1) \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(postinstall_cmds, $1) \
+    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
+    _LT_AC_TAGVAR(no_undefined_flag, $1) \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+    _LT_AC_TAGVAR(hardcode_automatic, $1) \
+    _LT_AC_TAGVAR(module_cmds, $1) \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(exclude_expsyms, $1) \
+    _LT_AC_TAGVAR(include_expsyms, $1); do
+
+    case $var in
+    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_cmds, $1) | \
+    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(module_cmds, $1) | \
+    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\[$]0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+    ;;
+  esac
+
+ifelse([$1], [],
+  [cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  AC_MSG_NOTICE([creating $ofile])],
+  [cfgfile="$ofile"])
+
+  cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+
+# Is the compiler the GNU C compiler?
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+
+# Symbols that must always be exported.
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
+
+__EOF__
+
+ifelse([$1],[], [
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+])
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+])# AC_LIBTOOL_CONFIG
+
+
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDGIRSTW]]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ ifelse([$1],[CXX],[
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix4* | aix5*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | kfreebsd*-gnu | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
+         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+])
+
+
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix4* | aix5*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  kfreebsd*-gnu)
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+  ;;
+  linux*)
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+  ;;
+  *)
+    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+],[
+  runpath_var=
+  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_AC_TAGVAR(archive_cmds, $1)=
+  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
+  _LT_AC_TAGVAR(module_cmds, $1)=
+  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
+  _LT_AC_TAGVAR(always_export_symbols, $1)=no
+  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_AC_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  _LT_CC_BASENAME([$compiler])
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=no
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    interix3*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) 
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_AC_TAGVAR(archive_cmds, $1)=''
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  else
+  	  # We have old collect2
+  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       _LT_AC_SYS_LIBPATH_AIX
+       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 _LT_AC_SYS_LIBPATH_AIX
+	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      # see comment about different semantics on the GNU ld section
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    bsdi[[45]]*)
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[[012]])
+         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[[012]])
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_direct, $1)=no
+      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         _LT_AC_TAGVAR(ld_shlibs, $1)=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    freebsd1*)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+      
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    openbsd*)
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	   ;;
+	 *)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+  fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_AC_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
+  fi
+  ;;
+esac
+])# AC_LIBTOOL_PROG_LD_SHLIBS
+
+
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+
+
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+  AC_SUBST(GCJFLAGS)
+])
+
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
+
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_MSG_RESULT([$SED])
+])
+
+# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+	 [AM_AUTOMAKE_VERSION([1.9.6])])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`AS_DIRNAME("$mf")`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`AS_DIRNAME(["$file"])`
+    AS_MKDIR_P([$dirpart/$fdir])
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+                  [_AM_DEPENDENCIES(CC)],
+                  [define([AC_PROG_CC],
+                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+                  [_AM_DEPENDENCIES(CXX)],
+                  [define([AC_PROG_CXX],
+                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $1 | $1:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake.  There are at least two reasons why we must not
+# use `-m 0755':
+#   - it causes special bits like SGID to be ignored,
+#   - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out.  Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+  # We used to keeping the `.' as first argument, in order to
+  # allow $(mkdir_p) to be used without argument.  As in
+  #   $(mkdir_p) $(somedir)
+  # where $(somedir) is conditionally defined.  However this is wrong
+  # for two reasons:
+  #  1. if the package is installed by a user who cannot write `.'
+  #     make install will fail,
+  #  2. the above comment should most certainly read
+  #     $(mkdir_p) $(DESTDIR)$(somedir)
+  #     so it does not work when $(somedir) is undefined and
+  #     $(DESTDIR) is not.
+  #  To support the latter case, we have to write
+  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+  #  so the `.' trick is pointless.
+  mkdir_p='mkdir -p --'
+else
+  # On NextStep and OpenStep, the `mkdir' command does not
+  # recognize any option.  It will interpret all options as
+  # directories to create, and then abort because `.' already
+  # exists.
+  for d in ./-p ./--version;
+  do
+    test -d $d && rmdir $d
+  done
+  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+  if test -f "$ac_aux_dir/mkinstalldirs"; then
+    mkdir_p='$(mkinstalldirs)'
+  else
+    mkdir_p='$(install_sh) -d'
+  fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/ac_have_attribute.m4])
+m4_include([m4/ac_have_builtin_expect.m4])
+m4_include([m4/ac_rwlock.m4])
+m4_include([m4/acx_pthread.m4])
+m4_include([m4/google_namespace.m4])
+m4_include([m4/namespaces.m4])
+m4_include([m4/stl_namespace.m4])
diff --git a/autogen.sh b/autogen.sh
new file mode 100755
index 0000000..4d53592
--- /dev/null
+++ b/autogen.sh
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+# Before using, you should figure out all the .m4 macros that your
+# configure.m4 script needs and make sure they exist in the autoconf/
+# directory.
+#
+# These are the files that this script might edit:
+#    aclocal.m4 configure Makefile.in src/config.h.in \
+#    depcomp config.guess config.sub install-sh missing mkinstalldirs \
+#    ltmain.sh
+#
+# Here's a command you can run to see what files aclocal will import:
+#  aclocal -I ../autoconf --output=- | sed -n 's/^m4_include..\([^]]*\).*/\1/p'
+
+set -ex
+rm -rf autom4te.cache
+
+aclocal --force -I m4
+grep -q LIBTOOL configure.ac && libtoolize -c -f
+autoconf -f -W all,no-obsolete
+autoheader -f -W all
+automake -a -c -f -W all
+
+rm -rf autom4te.cache
+exit 0
diff --git a/compile b/compile
new file mode 100755
index 0000000..9bb997a
--- /dev/null
+++ b/compile
@@ -0,0 +1,99 @@
+#! /bin/sh
+
+# Wrapper for compilers which do not understand `-c -o'.
+
+# Copyright 1999, 2000 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Usage:
+# compile PROGRAM [ARGS]...
+# `-o FOO.o' is removed from the args passed to the actual compile.
+
+prog=$1
+shift
+
+ofile=
+cfile=
+args=
+while test $# -gt 0; do
+   case "$1" in
+    -o)
+       # configure might choose to run compile as `compile cc -o foo foo.c'.
+       # So we do something ugly here.
+       ofile=$2
+       shift
+       case "$ofile" in
+	*.o | *.obj)
+	   ;;
+	*)
+	   args="$args -o $ofile"
+	   ofile=
+	   ;;
+       esac
+       ;;
+    *.c)
+       cfile=$1
+       args="$args $1"
+       ;;
+    *)
+       args="$args $1"
+       ;;
+   esac
+   shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+   # If no `-o' option was seen then we might have been invoked from a
+   # pattern rule where we don't need one.  That is ok -- this is a
+   # normal compilation that the losing compiler can handle.  If no
+   # `.c' file was seen then we are probably linking.  That is also
+   # ok.
+   exec "$prog" $args
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d
+while true; do
+   if mkdir $lockdir > /dev/null 2>&1; then
+      break
+   fi
+   sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir $lockdir; exit 1" 1 2 15
+
+# Run the compile.
+"$prog" $args
+status=$?
+
+if test -f "$cofile"; then
+   mv "$cofile" "$ofile"
+fi
+
+rmdir $lockdir
+exit $status
diff --git a/config.guess b/config.guess
new file mode 100755
index 0000000..ad5281e
--- /dev/null
+++ b/config.guess
@@ -0,0 +1,1466 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-08-03'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[45])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    x86:Interix*:[34]*)
+	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+	exit ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    arm*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit ;;
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#ifdef __INTEL_COMPILER
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    *86) UNAME_PROCESSOR=i686 ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config.sub b/config.sub
new file mode 100755
index 0000000..1c366df
--- /dev/null
+++ b/config.sub
@@ -0,0 +1,1579 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-07-08'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| ms1 \
+	| msp430 \
+	| ns16k | ns32k \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
+	| strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k)
+		basic_machine=$basic_machine-unknown
+		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| ms1-* \
+	| msp430-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	m32c-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16c)
+		basic_machine=cr16c-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+		;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+        -os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+        -tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+    	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/configure b/configure
new file mode 100755
index 0000000..785339a
--- /dev/null
+++ b/configure
@@ -0,0 +1,23182 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59 for glog 0.1.
+#
+# Report bugs to <opensource@google.com>.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+       echo_test_string=`eval $cmd` &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+    then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+   test "X$echo_testing_string" = "X$echo_test_string"; then
+  :
+else
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for dir in $PATH /usr/ucb; do
+    IFS="$lt_save_ifs"
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+       test "X$echo_testing_string" = "X$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running configure again with it.
+      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+
+tagnames=${tagnames+${tagnames},}CXX
+
+tagnames=${tagnames+${tagnames},}F77
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete.  It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='glog'
+PACKAGE_TARNAME='glog'
+PACKAGE_VERSION='0.1'
+PACKAGE_STRING='glog 0.1'
+PACKAGE_BUGREPORT='opensource@google.com'
+
+ac_unique_file="README"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+#  include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE GCC_TRUE GCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS ENABLE_FRAME_POINTERS_TRUE ENABLE_FRAME_POINTERS_FALSE X86_64_TRUE X86_64_FALSE acx_pthread_config PTHREAD_CC PTHREAD_LIBS PTHREAD_CFLAGS ac_google_start_namespace ac_google_end_namespace ac_google_namespace ac_cv_cxx_using_operator ac_cv___attribute___noreturn ac_cv___attribute___printf_4_5 ac_cv_have___builtin_expect ac_cv_have_stdint_h ac_cv_have_systypes_h ac_cv_have_inttypes_h ac_cv_have_uint16_t ac_cv_have_u_int16_t ac_cv_have___uint16 ac_cv_have_libgflags GFLAGS_LIBS LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_option in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    eval "enable_$ac_feature=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+   { (exit 1); exit 1; }; }
+    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_$ac_feature='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case $ac_option in
+      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_$ac_package='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid package name: $ac_package" >&2
+   { (exit 1); exit 1; }; }
+    ac_package=`echo $ac_package | sed 's/-/_/g'`
+    eval "with_$ac_package=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; }
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+   { (exit 1); exit 1; }; }
+    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+    eval "$ac_envvar='$ac_optarg'"
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  { echo "$as_me: error: missing argument to $ac_option" >&2
+   { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+	      localstatedir libdir includedir oldincludedir infodir mandir
+do
+  eval ac_val=$`echo $ac_var`
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* ) ;;
+    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used." >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$0" : 'X\(//\)[^/]' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+   { (exit 1); exit 1; }; }
+  else
+    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+   { (exit 1); exit 1; }; }
+  fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+   { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+ac_env_CXX_set=${CXX+set}
+ac_env_CXX_value=$CXX
+ac_cv_env_CXX_set=${CXX+set}
+ac_cv_env_CXX_value=$CXX
+ac_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_env_CXXFLAGS_value=$CXXFLAGS
+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_cv_env_CXXFLAGS_value=$CXXFLAGS
+ac_env_CXXCPP_set=${CXXCPP+set}
+ac_env_CXXCPP_value=$CXXCPP
+ac_cv_env_CXXCPP_set=${CXXCPP+set}
+ac_cv_env_CXXCPP_value=$CXXCPP
+ac_env_F77_set=${F77+set}
+ac_env_F77_value=$F77
+ac_cv_env_F77_set=${F77+set}
+ac_cv_env_F77_value=$F77
+ac_env_FFLAGS_set=${FFLAGS+set}
+ac_env_FFLAGS_value=$FFLAGS
+ac_cv_env_FFLAGS_set=${FFLAGS+set}
+ac_cv_env_FFLAGS_value=$FFLAGS
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures glog 0.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+  cat <<_ACEOF
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+			  [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+			  [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR           user executables [EPREFIX/bin]
+  --sbindir=DIR          system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR       program executables [EPREFIX/libexec]
+  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
+  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
+  --libdir=DIR           object code libraries [EPREFIX/lib]
+  --includedir=DIR       C header files [PREFIX/include]
+  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
+  --infodir=DIR          info documentation [PREFIX/info]
+  --mandir=DIR           man documentation [PREFIX/man]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of glog 0.1:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]
+                          build shared libraries [default=yes]
+  --enable-static[=PKGS]
+                          build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-frame-pointers On x86_64 systems, compile with
+                          -fno-omit-frame-pointer (see INSTALL)
+  --enable-namespace=FOO to define these Google
+                             classes in the FOO namespace. --disable-namespace
+                             to define them in the global namespace. Default
+                             is to define them in namespace google.
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-pic              try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-tags[=TAGS]
+                          include additional configurations [automatic]
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+              headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+  F77         Fortran 77 compiler command
+  FFLAGS      Fortran 77 compiler flags
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <opensource@google.com>.
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  ac_popdir=`pwd`
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d $ac_dir || continue
+    ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+    cd $ac_dir
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_srcdir/configure.gnu; then
+      echo
+      $SHELL $ac_srcdir/configure.gnu  --help=recursive
+    elif test -f $ac_srcdir/configure; then
+      echo
+      $SHELL $ac_srcdir/configure  --help=recursive
+    elif test -f $ac_srcdir/configure.ac ||
+	   test -f $ac_srcdir/configure.in; then
+      echo
+      $ac_configure --help
+    else
+      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi
+    cd "$ac_popdir"
+  done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+  cat <<\_ACEOF
+glog configure 0.1
+generated by GNU Autoconf 2.59
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by glog $as_me 0.1, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    2)
+      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+      # Get rid of the leading space.
+      ac_sep=" "
+      ;;
+    esac
+  done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+{
+  (set) 2>&1 |
+    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      sed -n \
+	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+      ;;
+    *)
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+}
+    echo
+
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=$`echo $ac_var`
+      echo "$ac_var='"'"'$ac_val'"'"'"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=$`echo $ac_var`
+	echo "$ac_var='"'"'$ac_val'"'"'"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      sed "/^$/d" confdefs.h | sort
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      echo "$as_me: caught signal $ac_signal"
+    echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core &&
+  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+     ' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . $cache_file;;
+      *)                      . ./$cache_file;;
+    esac
+  fi
+else
+  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+  eval ac_new_val="\$ac_env_${ac_var}_value"
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
+echo "$as_me:   former value:  $ac_old_val" >&2;}
+	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
+echo "$as_me:   current value: $ac_new_val" >&2;}
+	ac_cache_corrupted=:
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# The argument here is just something that should be in the current directory
+# (for sanity checking)
+
+am__api_version="1.9"
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f $ac_dir/shtool; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+  ./ | .// | /cC/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	    break 3
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+done
+
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL=$ac_install_sh
+  fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" >&2;}
+   { (exit 1); exit 1; }; }
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $.  echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+  # We used to keeping the `.' as first argument, in order to
+  # allow $(mkdir_p) to be used without argument.  As in
+  #   $(mkdir_p) $(somedir)
+  # where $(somedir) is conditionally defined.  However this is wrong
+  # for two reasons:
+  #  1. if the package is installed by a user who cannot write `.'
+  #     make install will fail,
+  #  2. the above comment should most certainly read
+  #     $(mkdir_p) $(DESTDIR)$(somedir)
+  #     so it does not work when $(somedir) is undefined and
+  #     $(DESTDIR) is not.
+  #  To support the latter case, we have to write
+  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+  #  so the `.' trick is pointless.
+  mkdir_p='mkdir -p --'
+else
+  # On NextStep and OpenStep, the `mkdir' command does not
+  # recognize any option.  It will interpret all options as
+  # directories to create, and then abort because `.' already
+  # exists.
+  for d in ./-p ./--version;
+  do
+    test -d $d && rmdir $d
+  done
+  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+  if test -f "$ac_aux_dir/mkinstalldirs"; then
+    mkdir_p='$(mkinstalldirs)'
+  else
+    mkdir_p='$(install_sh) -d'
+  fi
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.make <<\_ACEOF
+all:
+	@echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+  SET_MAKE=
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+   test -f $srcdir/config.status; then
+  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='glog'
+ VERSION='0.1'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+          ac_config_headers="$ac_config_headers src/config.h"
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  CC=$ac_ct_CC
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_CC" && break
+done
+
+  CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+     "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+  (eval $ac_link_default) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Find the output, starting from the most likely.  This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+	;;
+    conftest.$ac_ext )
+	# This is the source file.
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	# FIXME: I believe we export ac_cv_exeext for Libtool,
+	# but it would be cool to find out if it's true.  Does anybody
+	# maintain Libtool? --akim.
+	export ac_cv_exeext
+	break;;
+    * )
+	break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+   { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+  if { ac_try='./$ac_file'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+  fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  export ac_cv_exeext
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std1 is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std1.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX 10.20 and later	-Ae
+# HP-UX older versions	-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+  x|xno)
+    echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+  *)
+    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+    CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C.  Since we use `exit',
+# in C++ we need to declare it.  In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+  choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  for ac_declaration in \
+   '' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
+fi
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+          ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+   am__include=include
+   am__quote=
+   _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+      am__include=.include
+      am__quote="\""
+      _am_result=BSD
+   fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+  enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_CXX" && break
+done
+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
+
+  CXX=$ac_ct_CXX
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+     "checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+
+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cxx_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cxx_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cxx_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+for ac_declaration in \
+   '' \
+   'extern "C" void std::exit (int) throw (); using std::exit;' \
+   'extern "C" void std::exit (int); using std::exit;' \
+   'extern "C" void exit (int) throw ();' \
+   'extern "C" void exit (int);' \
+   'void exit (int);'
+do
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+  echo '#ifdef __cplusplus' >>confdefs.h
+  echo $ac_declaration      >>confdefs.h
+  echo '#endif'             >>confdefs.h
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CXX"  am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    case $depmode in
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    none) break ;;
+    esac
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.
+    if depmode=$depmode \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+
+
+if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+
+
+if test "$GCC" = yes; then
+  GCC_TRUE=
+  GCC_FALSE='#'
+else
+  GCC_TRUE='#'
+  GCC_FALSE=
+fi
+   # let the Makefile know if we're gcc
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi;
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+  enableval="$enable_static"
+  p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi;
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+  enableval="$enable_fast_install"
+  p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi;
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+   { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+  ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+   { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+  ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+   { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
+if test "${lt_cv_path_SED+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+
+fi
+
+SED=$lt_cv_path_SED
+echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+    then ac_cv_prog_egrep='grep -E'
+    else ac_cv_prog_egrep='egrep'
+    fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6
+NM="$lt_cv_path_NM"
+
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | kfreebsd*-gnu | dragonfly*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix3*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+nto-qnx*)
+  lt_cv_deplibs_check_method=unknown
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *ELF-32*)
+      HPUX_IA64_MODE="32"
+      ;;
+    *ELF-64*)
+      HPUX_IA64_MODE="64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 4385 "configure"' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+   if test "$lt_cv_prog_gnu_ld" = yes; then
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -melf32bsmip"
+      ;;
+    *N32*)
+      LD="${LD-ld} -melf32bmipn32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -melf64bmip"
+      ;;
+    esac
+   else
+    case `/usr/bin/file conftest.$ac_objext` in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+   fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *32-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_i386"
+          ;;
+        ppc64-*linux*|powerpc64-*linux*)
+          LD="${LD-ld} -m elf32ppclinux"
+          ;;
+        s390x-*linux*)
+          LD="${LD-ld} -m elf_s390"
+          ;;
+        sparc64-*linux*)
+          LD="${LD-ld} -m elf32_sparc"
+          ;;
+      esac
+      ;;
+    *64-bit*)
+      case $host in
+        x86_64-*linux*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        ppc*-*linux*|powerpc*-*linux*)
+          LD="${LD-ld} -m elf64ppc"
+          ;;
+        s390*-*linux*)
+          LD="${LD-ld} -m elf64_s390"
+          ;;
+        sparc*-*linux*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  lt_cv_cc_needs_belf=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)    LD="${LD-ld} -64" ;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_header_stdc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then
+  :
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      exit(2);
+  exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  eval "$as_ac_Header=yes"
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to opensource@google.com ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
+if test -z "$CXXCPP"; then
+  if test "${ac_cv_prog_CXXCPP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+echo "$as_me:$LINENO: result: $CXXCPP" >&5
+echo "${ECHO_T}$CXXCPP" >&6
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether non-existent headers
+  # can be detected and how.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_cxx_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  # Broken: success on invalid input.
+continue
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+  :
+else
+  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+fi
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$F77"; then
+  ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+  echo "$as_me:$LINENO: result: $F77" >&5
+echo "${ECHO_T}$F77" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+    test -n "$F77" && break
+  done
+fi
+if test -z "$F77"; then
+  ac_ct_F77=$F77
+  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_F77"; then
+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_F77="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+  echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
+echo "${ECHO_T}$ac_ct_F77" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$ac_ct_F77" && break
+done
+
+  F77=$ac_ct_F77
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:5282:" \
+     "checking for Fortran 77 compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+  (eval $ac_compiler --version </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+  (eval $ac_compiler -v </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+  (eval $ac_compiler -V </dev/null >&5) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_compiler_gnu=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_f77_g+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  FFLAGS=-g
+cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_f77_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_f77_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
+if test "$ac_test_FFLAGS" = set; then
+  FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-g -O2"
+  else
+    FFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-O2"
+  else
+    FFLAGS=
+  fi
+fi
+
+G77=`test $ac_compiler_gnu = yes && echo yes`
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    # If test is not a shell built-in, we'll probably end up computing a
+    # maximum length that is only half of the actual maximum length, but
+    # we can't tell.
+    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	    lt_cv_sys_max_cmd_len=$new_result &&
+	    test $i != 17 # 1/2 MB should be enough
+    do
+      i=`expr $i + 1`
+      teststring=$teststring$teststring
+    done
+    teststring=
+    # Add a significant safety factor because C++ compilers can tack on massive
+    # amounts of additional arguments before passing them to the linker.
+    # It appears as though 1/2 is a usable value.
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+  echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  ;;
+linux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDGIRSTW]'
+    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -f conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6
+else
+  echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+fi
+
+echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+if test "${lt_cv_objdir+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6
+objdir=$lt_cv_objdir
+
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="${ac_tool_prefix}ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+  ac_ct_AR=$AR
+  # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="ar"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  AR=$ac_ct_AR
+else
+  AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  RANLIB=$ac_ct_RANLIB
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  STRIP=$ac_ct_STRIP
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+enable_dlopen=no
+enable_win32_dll=no
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+  enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+  withval="$with_pic"
+  pic_mode="$withval"
+else
+  pic_mode=default
+fi;
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:6343: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:6347: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic='-qnocommon'
+         lt_prog_compiler_wl='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:6611: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:6615: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
+
+if test x"$lt_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works=yes
+       fi
+     else
+       lt_prog_compiler_static_works=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:6715: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:6719: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag=
+  enable_shared_with_static_runtimes=no
+  archive_cmds=
+  archive_expsym_cmds=
+  old_archive_From_new_cmds=
+  old_archive_from_expsyms_cmds=
+  export_dynamic_flag_spec=
+  whole_archive_flag_spec=
+  thread_safe_flag_spec=
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_flag_spec_ld=
+  hardcode_libdir_separator=
+  hardcode_direct=no
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  link_all_deplibs=unknown
+  hardcode_automatic=no
+  module_cmds=
+  module_expsym_cmds=
+  always_export_symbols=no
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	link_all_deplibs=no
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L=yes
+  	  hardcode_libdir_flag_spec='-L$libdir'
+  	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec='$convenience'
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc=no
+      hardcode_direct=no
+      hardcode_automatic=yes
+      hardcode_shlibpath_var=unsupported
+      whole_archive_flag_spec=''
+      link_all_deplibs=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      link_all_deplibs=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	hardcode_direct=yes
+	export_dynamic_flag_spec='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld='+b $libdir'
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      link_all_deplibs=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    openbsd*)
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+echo "${ECHO_T}$archive_cmds_need_lc" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var" || \
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+   darwin*)
+       if test -n "$STRIP" ; then
+         striplib="$STRIP -x"
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+       else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+       ;;
+   *)
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+    ;;
+  esac
+fi
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+   ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+   ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+   ;;
+
+  *)
+    echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef shl_load
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != shl_load;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+  lt_cv_dlopen="shl_load"
+else
+  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_shl_load=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+  echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != dlopen;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+  lt_cv_dlopen="dlopen"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dl_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_svld_dlopen=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_dld_dld_link=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 9073 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<EOF
+#line 9173 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+    exit (status);
+}
+EOF
+  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+# Report which library types will actually be built
+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+    ;;
+esac
+echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler \
+    CC \
+    LD \
+    lt_prog_compiler_wl \
+    lt_prog_compiler_pic \
+    lt_prog_compiler_static \
+    lt_prog_compiler_no_builtin_flag \
+    export_dynamic_flag_spec \
+    thread_safe_flag_spec \
+    whole_archive_flag_spec \
+    enable_shared_with_static_runtimes \
+    old_archive_cmds \
+    old_archive_from_new_cmds \
+    predep_objects \
+    postdep_objects \
+    predeps \
+    postdeps \
+    compiler_lib_search_path \
+    archive_cmds \
+    archive_expsym_cmds \
+    postinstall_cmds \
+    postuninstall_cmds \
+    old_archive_from_expsyms_cmds \
+    allow_undefined_flag \
+    no_undefined_flag \
+    export_symbols_cmds \
+    hardcode_libdir_flag_spec \
+    hardcode_libdir_flag_spec_ld \
+    hardcode_libdir_separator \
+    hardcode_automatic \
+    module_cmds \
+    module_expsym_cmds \
+    lt_cv_prog_compiler_c_o \
+    exclude_expsyms \
+    include_expsyms; do
+
+    case $var in
+    old_archive_cmds | \
+    old_archive_from_new_cmds | \
+    archive_cmds | \
+    archive_expsym_cmds | \
+    module_cmds | \
+    module_expsym_cmds | \
+    old_archive_from_expsyms_cmds | \
+    export_symbols_cmds | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="${ofile}T"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  $rm -f "$cfgfile"
+  { echo "$as_me:$LINENO: creating $ofile" >&5
+echo "$as_me: creating $ofile" >&6;}
+
+  cat <<__EOF__ >> "$cfgfile"
+#! $SHELL
+
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# The names of the tagged configurations supported by this script.
+available_tags=
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# ### END LIBTOOL CONFIG
+
+__EOF__
+
+
+  case $host_os in
+  aix3*)
+    cat <<\EOF >> "$cfgfile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" || \
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+# Check whether --with-tags or --without-tags was given.
+if test "${with_tags+set}" = set; then
+  withval="$with_tags"
+  tagnames="$withval"
+fi;
+
+if test -f "$ltmain" && test -n "$tagnames"; then
+  if test ! -f "${ofile}"; then
+    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
+echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
+  fi
+
+  if test -z "$LTCC"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+    if test -z "$LTCC"; then
+      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
+echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
+    else
+      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
+echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
+    fi
+  fi
+  if test -z "$LTCFLAGS"; then
+    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
+  fi
+
+  # Extract list of available tagged configurations in $ofile.
+  # Note that this assumes the entire list is on one line.
+  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+
+  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+  for tagname in $tagnames; do
+    IFS="$lt_save_ifs"
+    # Check whether tagname contains only valid characters
+    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
+    "") ;;
+    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
+echo "$as_me: error: invalid tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+    esac
+
+    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+    then
+      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
+echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+
+    # Update the list of available tags.
+    if test -n "$tagname"; then
+      echo appending configuration tag \"$tagname\" to $ofile
+
+      case $tagname in
+      CXX)
+	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+	    (test "X$CXX" != "Xg++"))) ; then
+	  ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+  $as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+  lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+  $as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+compiler_CXX=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+else
+  lt_prog_compiler_no_builtin_flag_CXX=
+fi
+
+if test "$GXX" = yes; then
+  # Set up default GNU C++ configuration
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+  withval="$with_gnu_ld"
+  test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+   { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+  # Check if GNU C++ uses GNU ld as the underlying linker, since the
+  # archiving commands below assume that GNU ld is being used.
+  if test "$with_gnu_ld" = yes; then
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+    #     investigate it a little bit more. (MM)
+    wlarc='${wl}'
+
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_CXX=
+    fi
+  else
+    with_gnu_ld=no
+    wlarc=
+
+    # A generic and very simple default shared library creation
+    # command for GNU C++ for the case where it uses the native
+    # linker, instead of GNU ld.  If possible, this setting should
+    # overridden to take advantage of the native linker features on
+    # the platform it is being used on.
+    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+  fi
+
+  # Commands to make compiler produce verbose output that lists
+  # what "hidden" libraries, object files and flags are used when
+  # linking a shared library.
+  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+else
+  GXX=no
+  with_gnu_ld=no
+  wlarc=
+fi
+
+# PORTME: fill in a description of your system's C++ link characteristics
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+ld_shlibs_CXX=yes
+case $host_os in
+  aix3*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  aix4* | aix5*)
+    if test "$host_cpu" = ia64; then
+      # On IA64, the linker does run time linking by default, so we don't
+      # have to do anything special.
+      aix_use_runtimelinking=no
+      exp_sym_flag='-Bexport'
+      no_entry_flag=""
+    else
+      aix_use_runtimelinking=no
+
+      # Test if we are trying to use run time linking or normal
+      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+      # need to do runtime linking.
+      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+	;;
+      esac
+
+      exp_sym_flag='-bexport'
+      no_entry_flag='-bnoentry'
+    fi
+
+    # When large executables or shared objects are built, AIX ld can
+    # have problems creating the table of contents.  If linking a library
+    # or program results in "error TOC overflow" add -mminimal-toc to
+    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+    archive_cmds_CXX=''
+    hardcode_direct_CXX=yes
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+
+    if test "$GXX" = yes; then
+      case $host_os in aix4.[012]|aix4.[012].*)
+      # We only want to do this on AIX 4.2 and lower, the check
+      # below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  hardcode_direct_CXX=yes
+	else
+	  # We have old collect2
+	  hardcode_direct_CXX=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_CXX=yes
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  hardcode_libdir_separator_CXX=
+	fi
+	;;
+      esac
+      shared_flag='-shared'
+      if test "$aix_use_runtimelinking" = yes; then
+	shared_flag="$shared_flag "'${wl}-G'
+      fi
+    else
+      # not using gcc
+      if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+      else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+      fi
+    fi
+
+    # It seems that -bexpall does not export symbols beginning with
+    # underscore (_), so it is better to generate a list of symbols to export.
+    always_export_symbols_CXX=yes
+    if test "$aix_use_runtimelinking" = yes; then
+      # Warning - without using the other runtime loading flags (-brtl),
+      # -berok will link without error, but may produce a broken library.
+      allow_undefined_flag_CXX='-berok'
+      # Determine the default libpath from the value encoded in an empty executable.
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+     else
+      if test "$host_cpu" = ia64; then
+	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	allow_undefined_flag_CXX="-z nodefs"
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+      else
+	# Determine the default libpath from the value encoded in an empty executable.
+	cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	no_undefined_flag_CXX=' ${wl}-bernotok'
+	allow_undefined_flag_CXX=' ${wl}-berok'
+	# Exported symbols can be pulled into shared objects from archives
+	whole_archive_flag_spec_CXX='$convenience'
+	archive_cmds_need_lc_CXX=yes
+	# This is similar to how AIX traditionally builds its shared libraries.
+	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+      fi
+    fi
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag_CXX=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+    ;;
+
+  chorus*)
+    case $cc_basename in
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+
+  cygwin* | mingw* | pw32*)
+    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+    # as there is no search path for DLLs.
+    hardcode_libdir_flag_spec_CXX='-L$libdir'
+    allow_undefined_flag_CXX=unsupported
+    always_export_symbols_CXX=no
+    enable_shared_with_static_runtimes_CXX=yes
+
+    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      # If the export-symbols file already is a .def file (1st line
+      # is EXPORTS), use it as is; otherwise, prepend...
+      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+      else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+      fi~
+      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+    else
+      ld_shlibs_CXX=no
+    fi
+  ;;
+      darwin* | rhapsody*)
+        case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+        esac
+      archive_cmds_need_lc_CXX=no
+      hardcode_direct_CXX=no
+      hardcode_automatic_CXX=yes
+      hardcode_shlibpath_var_CXX=unsupported
+      whole_archive_flag_spec_CXX=''
+      link_all_deplibs_CXX=yes
+
+    if test "$GXX" = yes ; then
+      lt_int_apple_cc_single_mod=no
+      output_verbose_link_cmd='echo'
+      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+       lt_int_apple_cc_single_mod=yes
+      fi
+      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      else
+          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        fi
+        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          else
+            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          fi
+            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_CXX=no
+          ;;
+      esac
+      fi
+        ;;
+
+  dgux*)
+    case $cc_basename in
+      ec++*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      ghcx*)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  freebsd[12]*)
+    # C++ shared libraries reported to be fairly broken before switch to ELF
+    ld_shlibs_CXX=no
+    ;;
+  freebsd-elf*)
+    archive_cmds_need_lc_CXX=no
+    ;;
+  freebsd* | kfreebsd*-gnu | dragonfly*)
+    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+    # conventions
+    ld_shlibs_CXX=yes
+    ;;
+  gnu*)
+    ;;
+  hpux9*)
+    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    hardcode_direct_CXX=yes
+    hardcode_minus_L_CXX=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+
+    case $cc_basename in
+    CC*)
+      # FIXME: insert proper C++ library support
+      ld_shlibs_CXX=no
+      ;;
+    aCC*)
+      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      #
+      # There doesn't appear to be a way to prevent this compiler from
+      # explicitly linking system object files so we need to strip them
+      # from the output so that they don't get included in the library
+      # dependencies.
+      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      ;;
+    *)
+      if test "$GXX" = yes; then
+        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+      fi
+      ;;
+    esac
+    ;;
+  hpux10*|hpux11*)
+    if test $with_gnu_ld = no; then
+      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_CXX=:
+
+      case $host_cpu in
+      hppa*64*|ia64*)
+	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
+        ;;
+      *)
+	export_dynamic_flag_spec_CXX='${wl}-E'
+        ;;
+      esac
+    fi
+    case $host_cpu in
+    hppa*64*|ia64*)
+      hardcode_direct_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      ;;
+    *)
+      hardcode_direct_CXX=yes
+      hardcode_minus_L_CXX=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+      ;;
+    esac
+
+    case $cc_basename in
+      CC*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      aCC*)
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case $host_cpu in
+	    hppa*64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    ia64*)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    *)
+	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  interix3*)
+    hardcode_direct_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    export_dynamic_flag_spec_CXX='${wl}-E'
+    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+    # Instead, shared libraries are loaded at an image base (0x10000000 by
+    # default) and relocated if they conflict, which is a slow very memory
+    # consuming and fragmenting process.  To avoid this, we pick a random,
+    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+    ;;
+  irix5* | irix6*)
+    case $cc_basename in
+      CC*)
+	# SGI C++
+	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+      *)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	  else
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	link_all_deplibs_CXX=yes
+	;;
+    esac
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator_CXX=:
+    ;;
+  linux*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+      icpc*)
+	# Intel C++
+	with_gnu_ld=yes
+	# version 8.0 and above of icpc choke on multiply defined symbols
+	# if we add $predep_objects and $postdep_objects, however 7.1 and
+	# earlier do not add the objects themselves.
+	case `$CC -V 2>&1` in
+	*"Version 7."*)
+  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	*)  # Version 8.0 or newer
+	  tmp_idyn=
+	  case $host_cpu in
+	    ia64*) tmp_idyn=' -i_dynamic';;
+	  esac
+  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  ;;
+	esac
+	archive_cmds_need_lc_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+      pgCC*)
+        # Portland Group C++ compiler
+	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+        ;;
+      cxx*)
+	# Compaq C++
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	runpath_var=LD_RUN_PATH
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+    esac
+    ;;
+  lynxos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  m88k*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  mvs*)
+    case $cc_basename in
+      cxx*)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+      wlarc=
+      hardcode_libdir_flag_spec_CXX='-R$libdir'
+      hardcode_direct_CXX=yes
+      hardcode_shlibpath_var_CXX=no
+    fi
+    # Workaround some broken pre-1.5 toolchains
+    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+    ;;
+  openbsd2*)
+    # C++ shared libraries are fairly broken
+    ld_shlibs_CXX=no
+    ;;
+  openbsd*)
+    hardcode_direct_CXX=yes
+    hardcode_shlibpath_var_CXX=no
+    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+      export_dynamic_flag_spec_CXX='${wl}-E'
+      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    fi
+    output_verbose_link_cmd='echo'
+    ;;
+  osf3*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx*)
+	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  osf4* | osf5*)
+    case $cc_basename in
+      KCC*)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
+	;;
+      RCC*)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      cxx*)
+	allow_undefined_flag_CXX=' -expect_unresolved \*'
+	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
+	  $rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	hardcode_libdir_separator_CXX=:
+
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+      *)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+
+	else
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	fi
+	;;
+    esac
+    ;;
+  psos*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  sunos4*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      lcc*)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  solaris*)
+    case $cc_basename in
+      CC*)
+	# Sun C++ 4.2, 5.x and Centerline C++
+        archive_cmds_need_lc_CXX=yes
+	no_undefined_flag_CXX=' -zdefs'
+	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	hardcode_libdir_flag_spec_CXX='-R$libdir'
+	hardcode_shlibpath_var_CXX=no
+	case $host_os in
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  *)
+	    # The C++ compiler is used as linker so we must use $wl
+	    # flag to pass the commands to the underlying system
+	    # linker. We must also pass each convience library through
+	    # to the system linker between allextract/defaultextract.
+	    # The C++ compiler will combine linker options so we
+	    # cannot just pass the convience library names through
+	    # without $wl.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+	    ;;
+	esac
+	link_all_deplibs_CXX=yes
+
+	output_verbose_link_cmd='echo'
+
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	;;
+      gcx*)
+	# Green Hills C++ Compiler
+	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	# The C++ compiler must be used to create the archive.
+	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+      *)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+
+	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	fi
+	;;
+    esac
+    ;;
+  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+    no_undefined_flag_CXX='${wl}-z,text'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  sysv5* | sco3.2v5* | sco5v6*)
+    # Note: We can NOT use -z defs as we might desire, because we do not
+    # link with -lc, and that would cause any symbols used from libc to
+    # always be unresolved, which means just about no library would
+    # ever link correctly.  If we're not using GNU ld we use -z text
+    # though, which does catch some bad symbols but isn't as heavy-handed
+    # as -z defs.
+    # For security reasons, it is highly recommended that you always
+    # use absolute paths for naming shared libraries, and exclude the
+    # DT_RUNPATH tag from executables and libraries.  But doing so
+    # requires that you compile everything twice, which is a pain.
+    # So that behaviour is only enabled if SCOABSPATH is set to a
+    # non-empty value in the environment.  Most likely only useful for
+    # creating official distributions of packages.
+    # This is a hack until libtool officially supports absolute path
+    # names for shared libraries.
+    no_undefined_flag_CXX='${wl}-z,text'
+    allow_undefined_flag_CXX='${wl}-z,nodefs'
+    archive_cmds_need_lc_CXX=no
+    hardcode_shlibpath_var_CXX=no
+    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+    hardcode_libdir_separator_CXX=':'
+    link_all_deplibs_CXX=yes
+    export_dynamic_flag_spec_CXX='${wl}-Bexport'
+    runpath_var='LD_RUN_PATH'
+
+    case $cc_basename in
+      CC*)
+	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      *)
+	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+    esac
+    ;;
+  tandem*)
+    case $cc_basename in
+      NCC*)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+      *)
+	# FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+    esac
+    ;;
+  vxworks*)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+  *)
+    # FIXME: insert proper C++ library support
+    ld_shlibs_CXX=no
+    ;;
+esac
+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+GCC_CXX="$GXX"
+LD_CXX="$LD"
+
+
+cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+EOF
+
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  # The `*' in the case matches for architectures that use `case' in
+  # $output_verbose_cmd can trigger glob expansion during the loop
+  # eval without this substitution.
+  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+
+  for p in `eval $output_verbose_link_cmd`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$rm -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix3*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    postdeps_CXX='-lCstd -lCrun'
+    ;;
+  esac
+  ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+
+lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      ;;
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+      ;;
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | os2* | pw32*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix4* | aix5*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+       darwin*)
+         # PIC is the default on this platform
+         # Common symbols not allowed in MH_DYLIB files
+         case $cc_basename in
+           xlc*)
+           lt_prog_compiler_pic_CXX='-qnocommon'
+           lt_prog_compiler_wl_CXX='-Wl,'
+           ;;
+         esac
+       ;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | kfreebsd*-gnu | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  icpc* | ecpc*)
+	    # Intel C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC*)
+	    # Portland Group C++ compiler.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+	;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_CXX=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:11511: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:11515: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6
+
+if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6
+
+if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:11615: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:11619: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix4* | aix5*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+  ;;
+  cygwin* | mingw*)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  kfreebsd*-gnu)
+    link_all_deplibs_CXX=no
+  ;;
+  linux*)
+    link_all_deplibs_CXX=no
+  ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+
+echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_CXX
+	pic_flag=$lt_prog_compiler_pic_CXX
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+        allow_undefined_flag_CXX=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_CXX=no
+        else
+	  archive_cmds_need_lc_CXX=yes
+        fi
+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" || \
+   test -n "$runpath_var_CXX" || \
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+echo "${ECHO_T}$hardcode_action_CXX" >&6
+
+if test "$hardcode_action_CXX" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_CXX \
+    CC_CXX \
+    LD_CXX \
+    lt_prog_compiler_wl_CXX \
+    lt_prog_compiler_pic_CXX \
+    lt_prog_compiler_static_CXX \
+    lt_prog_compiler_no_builtin_flag_CXX \
+    export_dynamic_flag_spec_CXX \
+    thread_safe_flag_spec_CXX \
+    whole_archive_flag_spec_CXX \
+    enable_shared_with_static_runtimes_CXX \
+    old_archive_cmds_CXX \
+    old_archive_from_new_cmds_CXX \
+    predep_objects_CXX \
+    postdep_objects_CXX \
+    predeps_CXX \
+    postdeps_CXX \
+    compiler_lib_search_path_CXX \
+    archive_cmds_CXX \
+    archive_expsym_cmds_CXX \
+    postinstall_cmds_CXX \
+    postuninstall_cmds_CXX \
+    old_archive_from_expsyms_cmds_CXX \
+    allow_undefined_flag_CXX \
+    no_undefined_flag_CXX \
+    export_symbols_cmds_CXX \
+    hardcode_libdir_flag_spec_CXX \
+    hardcode_libdir_flag_spec_ld_CXX \
+    hardcode_libdir_separator_CXX \
+    hardcode_automatic_CXX \
+    module_cmds_CXX \
+    module_expsym_cmds_CXX \
+    lt_cv_prog_compiler_c_o_CXX \
+    exclude_expsyms_CXX \
+    include_expsyms_CXX; do
+
+    case $var in
+    old_archive_cmds_CXX | \
+    old_archive_from_new_cmds_CXX | \
+    archive_cmds_CXX | \
+    archive_expsym_cmds_CXX | \
+    module_cmds_CXX | \
+    module_expsym_cmds_CXX | \
+    old_archive_from_expsyms_cmds_CXX | \
+    export_symbols_cmds_CXX | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_CXX
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_CXX
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_CXX
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_CXX
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_CXX"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+archive_cmds_need_lc_F77=no
+allow_undefined_flag_F77=
+always_export_symbols_F77=no
+archive_expsym_cmds_F77=
+export_dynamic_flag_spec_F77=
+hardcode_direct_F77=no
+hardcode_libdir_flag_spec_F77=
+hardcode_libdir_flag_spec_ld_F77=
+hardcode_libdir_separator_F77=
+hardcode_minus_L_F77=no
+hardcode_automatic_F77=no
+module_cmds_F77=
+module_expsym_cmds_F77=
+link_all_deplibs_F77=unknown
+old_archive_cmds_F77=$old_archive_cmds
+no_undefined_flag_F77=
+whole_archive_flag_spec_F77=
+enable_shared_with_static_runtimes_F77=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+objext_F77=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+compiler_F77=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+aix4* | aix5*)
+  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+    test "$enable_shared" = yes && enable_static=no
+  fi
+  ;;
+esac
+echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6
+
+echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6
+
+GCC_F77="$G77"
+LD_F77="$LD"
+
+lt_prog_compiler_wl_F77=
+lt_prog_compiler_pic_F77=
+lt_prog_compiler_static_F77=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_F77='-Wl,'
+    lt_prog_compiler_static_F77='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_F77='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_F77=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_F77=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic_F77='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      else
+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_F77='-qnocommon'
+         lt_prog_compiler_wl_F77='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-KPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_F77='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_F77='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_F77='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_F77='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_F77='-Qoption ld '
+      lt_prog_compiler_pic_F77='-PIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_F77='-Kconform_pic'
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_F77='-pic'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_F77"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_F77=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:13203: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:13207: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6
+
+if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
+    case $lt_prog_compiler_pic_F77 in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
+     esac
+else
+    lt_prog_compiler_pic_F77=
+     lt_prog_compiler_can_build_shared_F77=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_F77=
+    ;;
+  *)
+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_F77=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_F77=yes
+       fi
+     else
+       lt_prog_compiler_static_works_F77=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6
+
+if test x"$lt_prog_compiler_static_works_F77" = xyes; then
+    :
+else
+    lt_prog_compiler_static_F77=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:13307: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:13311: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag_F77=
+  enable_shared_with_static_runtimes_F77=no
+  archive_cmds_F77=
+  archive_expsym_cmds_F77=
+  old_archive_From_new_cmds_F77=
+  old_archive_from_expsyms_cmds_F77=
+  export_dynamic_flag_spec_F77=
+  whole_archive_flag_spec_F77=
+  thread_safe_flag_spec_F77=
+  hardcode_libdir_flag_spec_F77=
+  hardcode_libdir_flag_spec_ld_F77=
+  hardcode_libdir_separator_F77=
+  hardcode_direct_F77=no
+  hardcode_minus_L_F77=no
+  hardcode_shlibpath_var_F77=unsupported
+  link_all_deplibs_F77=unknown
+  hardcode_automatic_F77=no
+  module_cmds_F77=
+  module_expsym_cmds_F77=
+  always_export_symbols_F77=no
+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_F77=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_F77=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_F77=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_F77=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_F77=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=no
+      enable_shared_with_static_runtimes_F77=yes
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_F77='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	link_all_deplibs_F77=no
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_F77=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_F77=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_F77" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_F77=
+      export_dynamic_flag_spec_F77=
+      whole_archive_flag_spec_F77=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=yes
+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_F77=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_F77=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_F77=''
+      hardcode_direct_F77=yes
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct_F77=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_F77=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_F77=yes
+  	  hardcode_libdir_flag_spec_F77='-L$libdir'
+  	  hardcode_libdir_separator_F77=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_F77=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_F77='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_F77="-z nodefs"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_F77=' ${wl}-bernotok'
+	  allow_undefined_flag_F77=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_F77='$convenience'
+	  archive_cmds_need_lc_F77=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_F77=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_F77=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_F77=' '
+      allow_undefined_flag_F77=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_F77='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_F77=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_F77=no
+      hardcode_direct_F77=no
+      hardcode_automatic_F77=yes
+      hardcode_shlibpath_var_F77=unsupported
+      whole_archive_flag_spec_F77=''
+      link_all_deplibs_F77=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_F77=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_F77=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      link_all_deplibs_F77=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_direct_F77=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	hardcode_direct_F77=yes
+	export_dynamic_flag_spec_F77='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_F77=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
+	  ;;
+	*)
+	  hardcode_direct_F77=yes
+	  export_dynamic_flag_spec_F77='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_F77=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      link_all_deplibs_F77=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    newsos6)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    openbsd*)
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_F77='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec_F77='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      allow_undefined_flag_F77=unsupported
+      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_F77=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_shlibpath_var_F77=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      link_all_deplibs_F77=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
+	  hardcode_direct_F77=no
+        ;;
+	motorola)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_F77=no
+      export_dynamic_flag_spec_F77='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_F77=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_F77=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag_F77='${wl}-z,text'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_F77='${wl}-z,text'
+      allow_undefined_flag_F77='${wl}-z,nodefs'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      ld_shlibs_F77=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
+echo "${ECHO_T}$ld_shlibs_F77" >&6
+test "$ld_shlibs_F77" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_F77" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_F77=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_F77 in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_F77
+	pic_flag=$lt_prog_compiler_pic_F77
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
+        allow_undefined_flag_F77=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_F77=no
+        else
+	  archive_cmds_need_lc_F77=yes
+        fi
+        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_F77=
+if test -n "$hardcode_libdir_flag_spec_F77" || \
+   test -n "$runpath_var_F77" || \
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_F77" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
+     test "$hardcode_minus_L_F77" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_F77=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_F77=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_F77=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
+echo "${ECHO_T}$hardcode_action_F77" >&6
+
+if test "$hardcode_action_F77" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_F77 \
+    CC_F77 \
+    LD_F77 \
+    lt_prog_compiler_wl_F77 \
+    lt_prog_compiler_pic_F77 \
+    lt_prog_compiler_static_F77 \
+    lt_prog_compiler_no_builtin_flag_F77 \
+    export_dynamic_flag_spec_F77 \
+    thread_safe_flag_spec_F77 \
+    whole_archive_flag_spec_F77 \
+    enable_shared_with_static_runtimes_F77 \
+    old_archive_cmds_F77 \
+    old_archive_from_new_cmds_F77 \
+    predep_objects_F77 \
+    postdep_objects_F77 \
+    predeps_F77 \
+    postdeps_F77 \
+    compiler_lib_search_path_F77 \
+    archive_cmds_F77 \
+    archive_expsym_cmds_F77 \
+    postinstall_cmds_F77 \
+    postuninstall_cmds_F77 \
+    old_archive_from_expsyms_cmds_F77 \
+    allow_undefined_flag_F77 \
+    no_undefined_flag_F77 \
+    export_symbols_cmds_F77 \
+    hardcode_libdir_flag_spec_F77 \
+    hardcode_libdir_flag_spec_ld_F77 \
+    hardcode_libdir_separator_F77 \
+    hardcode_automatic_F77 \
+    module_cmds_F77 \
+    module_expsym_cmds_F77 \
+    lt_cv_prog_compiler_c_o_F77 \
+    exclude_expsyms_F77 \
+    include_expsyms_F77; do
+
+    case $var in
+    old_archive_cmds_F77 | \
+    old_archive_from_new_cmds_F77 | \
+    archive_cmds_F77 | \
+    archive_expsym_cmds_F77 | \
+    module_cmds_F77 | \
+    module_expsym_cmds_F77 | \
+    old_archive_from_expsyms_cmds_F77 | \
+    export_symbols_cmds_F77 | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_F77
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_F77
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_F77
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_F77
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_F77
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_F77
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_F77
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_F77
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_F77
+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_F77
+module_expsym_cmds=$lt_module_expsym_cmds_F77
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_F77
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_F77
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_F77
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_F77
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_F77
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_F77
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_F77
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_F77
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_F77
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_F77
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_F77"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_F77
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_F77
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_F77
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_F77
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+
+
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+objext_GCJ=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+compiler_GCJ=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+archive_cmds_need_lc_GCJ=no
+
+old_archive_cmds_GCJ=$old_archive_cmds
+
+
+lt_prog_compiler_no_builtin_flag_GCJ=
+
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:15530: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:15534: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+lt_prog_compiler_wl_GCJ=
+lt_prog_compiler_pic_GCJ=
+lt_prog_compiler_static_GCJ=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_GCJ='-Wl,'
+    lt_prog_compiler_static_GCJ='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      # FIXME: we need at least 68020 code to build shared libraries, but
+      # adding the `-m68020' flag to GCC prevents building anything better,
+      # like `-m68040'.
+      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
+      ;;
+
+    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_GCJ='-fno-common'
+      ;;
+
+    interix3*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_GCJ=no
+      enable_shared=no
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_GCJ=-Kconform_pic
+      fi
+      ;;
+
+    hpux*)
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='-fPIC'
+	;;
+      esac
+      ;;
+
+    *)
+      lt_prog_compiler_pic_GCJ='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      else
+	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+      darwin*)
+        # PIC is the default on this platform
+        # Common symbols not allowed in MH_DYLIB files
+       case $cc_basename in
+         xlc*)
+         lt_prog_compiler_pic_GCJ='-qnocommon'
+         lt_prog_compiler_wl_GCJ='-Wl,'
+         ;;
+       esac
+       ;;
+
+    mingw* | pw32* | os2*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    linux*)
+      case $cc_basename in
+      icc* | ecc*)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-KPIC'
+	lt_prog_compiler_static_GCJ='-static'
+        ;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fpic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_GCJ='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_GCJ='-non_shared'
+        ;;
+      esac
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_GCJ='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_GCJ='-Qoption ld '
+      lt_prog_compiler_pic_GCJ='-PIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_GCJ='-Kconform_pic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_GCJ='-pic'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_GCJ"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_pic_works_GCJ=no
+  ac_outfile=conftest.$ac_objext
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:15798: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:15802: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_prog_compiler_pic_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6
+
+if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
+    case $lt_prog_compiler_pic_GCJ in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
+     esac
+else
+    lt_prog_compiler_pic_GCJ=
+     lt_prog_compiler_can_build_shared_GCJ=no
+fi
+
+fi
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_GCJ=
+    ;;
+  *)
+    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
+    ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_prog_compiler_static_works_GCJ=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   printf "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_prog_compiler_static_works_GCJ=yes
+       fi
+     else
+       lt_prog_compiler_static_works_GCJ=yes
+     fi
+   fi
+   $rm conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6
+
+if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
+    :
+else
+    lt_prog_compiler_static_GCJ=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_prog_compiler_c_o_GCJ=no
+   $rm -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:15902: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:15906: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_GCJ=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $rm conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+   $rm out/* && rmdir out
+   cd ..
+   rmdir conftest
+   $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+  if test "$hard_links" = no; then
+    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+  runpath_var=
+  allow_undefined_flag_GCJ=
+  enable_shared_with_static_runtimes_GCJ=no
+  archive_cmds_GCJ=
+  archive_expsym_cmds_GCJ=
+  old_archive_From_new_cmds_GCJ=
+  old_archive_from_expsyms_cmds_GCJ=
+  export_dynamic_flag_spec_GCJ=
+  whole_archive_flag_spec_GCJ=
+  thread_safe_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_GCJ=
+  hardcode_libdir_flag_spec_ld_GCJ=
+  hardcode_libdir_separator_GCJ=
+  hardcode_direct_GCJ=no
+  hardcode_minus_L_GCJ=no
+  hardcode_shlibpath_var_GCJ=unsupported
+  link_all_deplibs_GCJ=unknown
+  hardcode_automatic_GCJ=no
+  module_cmds_GCJ=
+  module_expsym_cmds_GCJ=
+  always_export_symbols_GCJ=no
+  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_GCJ=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  extract_expsyms_cmds=
+  # Just being paranoid about ensuring that cc_basename is set.
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+  case $host_os in
+  cygwin* | mingw* | pw32*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_GCJ=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+  	whole_archive_flag_spec_GCJ=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>/dev/null` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix3* | aix4* | aix5*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+
+      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+      # that the semantics of dynamic libraries on AmigaOS, at least up
+      # to version 4, is to share data among multiple programs linked
+      # with the same dynamic library.  Since this doesn't match the
+      # behavior of shared libraries on other platforms, we can't use
+      # them.
+      ld_shlibs_GCJ=no
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_GCJ=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=no
+      enable_shared_with_static_runtimes_GCJ=yes
+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    interix3*)
+      hardcode_direct_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    linux*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	tmp_addflag=
+	case $cc_basename,$host_cpu in
+	pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	esac
+	archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+	if test $supports_anon_versioning = yes; then
+	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
+  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+  $echo "local: *; };" >> $output_objdir/$libname.ver~
+	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	fi
+	link_all_deplibs_GCJ=no
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_GCJ=no
+	cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+	  else
+	    ld_shlibs_GCJ=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_GCJ" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_GCJ=
+      export_dynamic_flag_spec_GCJ=
+      whole_archive_flag_spec_GCJ=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=yes
+      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_GCJ=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_GCJ=unsupported
+      fi
+      ;;
+
+    aix4* | aix5*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+  	    aix_use_runtimelinking=yes
+  	    break
+  	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_GCJ=''
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+  	  # We have reworked collect2
+  	  hardcode_direct_GCJ=yes
+	  else
+  	  # We have old collect2
+  	  hardcode_direct_GCJ=unsupported
+  	  # It fails to find uninstalled libraries when the uninstalled
+  	  # path is not listed in the libpath.  Setting hardcode_minus_L
+  	  # to unsupported forces relinking
+  	  hardcode_minus_L_GCJ=yes
+  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
+  	  hardcode_libdir_separator_GCJ=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+  	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_GCJ=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_GCJ='-berok'
+       # Determine the default libpath from the value encoded in an empty executable.
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+       else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_GCJ="-z nodefs"
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_GCJ=' ${wl}-bernotok'
+	  allow_undefined_flag_GCJ=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec_GCJ='$convenience'
+	  archive_cmds_need_lc_GCJ=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      # see comment about different semantics on the GNU ld section
+      ld_shlibs_GCJ=no
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_GCJ=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ=' '
+      allow_undefined_flag_GCJ=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_From_new_cmds_GCJ='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes_GCJ=yes
+      ;;
+
+    darwin* | rhapsody*)
+      case $host_os in
+        rhapsody* | darwin1.[012])
+         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
+         ;;
+       *) # Darwin 1.3 on
+         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+         else
+           case ${MACOSX_DEPLOYMENT_TARGET} in
+             10.[012])
+               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+               ;;
+             10.*)
+               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
+               ;;
+           esac
+         fi
+         ;;
+      esac
+      archive_cmds_need_lc_GCJ=no
+      hardcode_direct_GCJ=no
+      hardcode_automatic_GCJ=yes
+      hardcode_shlibpath_var_GCJ=unsupported
+      whole_archive_flag_spec_GCJ=''
+      link_all_deplibs_GCJ=yes
+    if test "$GCC" = yes ; then
+    	output_verbose_link_cmd='echo'
+        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    else
+      case $cc_basename in
+        xlc*)
+         output_verbose_link_cmd='echo'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          ;;
+       *)
+         ld_shlibs_GCJ=no
+          ;;
+      esac
+    fi
+      ;;
+
+    dgux*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    freebsd1*)
+      ld_shlibs_GCJ=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
+    kfreebsd*-gnu)
+      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      link_all_deplibs_GCJ=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_direct_GCJ=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	hardcode_direct_GCJ=yes
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_GCJ=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
+	  ;;
+	*)
+	  hardcode_direct_GCJ=yes
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_GCJ=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
+      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    newsos6)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    openbsd*)
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+      else
+       case $host_os in
+	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
+	   ;;
+	 *)
+	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	   ;;
+       esac
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      allow_undefined_flag_GCJ=unsupported
+      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
+      fi
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_GCJ=' -z text'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+      else
+	wlarc=''
+	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+ 	# The compiler driver will combine linker options so we
+ 	# cannot just pass the convience library names through
+ 	# without $wl, iff we do not link with $LD.
+ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
+ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
+ 	case $wlarc in
+ 	'')
+ 	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
+ 	*)
+ 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	esac ;;
+      esac
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
+	  hardcode_direct_GCJ=no
+        ;;
+	motorola)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_GCJ=no
+      export_dynamic_flag_spec_GCJ='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_GCJ=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_GCJ=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+      no_undefined_flag_GCJ='${wl}-z,text'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_GCJ='${wl}-z,text'
+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      ld_shlibs_GCJ=no
+      ;;
+    esac
+  fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
+echo "${ECHO_T}$ld_shlibs_GCJ" >&6
+test "$ld_shlibs_GCJ" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_GCJ" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_GCJ=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_GCJ in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      $rm conftest*
+      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_GCJ
+	pic_flag=$lt_prog_compiler_pic_GCJ
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
+        allow_undefined_flag_GCJ=
+        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }
+        then
+	  archive_cmds_need_lc_GCJ=no
+        else
+	  archive_cmds_need_lc_GCJ=yes
+        fi
+        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $rm conftest*
+      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix4* | aix5*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $rm \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
+
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+  if test "$GCC" = yes; then
+    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+  else
+    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+  fi
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  freebsd*) # from 4.6 on
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+   hppa*64*)
+     shrext_cmds='.sl'
+     hardcode_into_libs=yes
+     dynamic_linker="$host_os dld.sl"
+     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+     soname_spec='${libname}${release}${shared_ext}$major'
+     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+     ;;
+   *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+interix3*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
+knetbsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+nto-qnx*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+    *)                         need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      export_dynamic_flag_spec='${wl}-Blargedynsym'
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+    shlibpath_overrides_runpath=no
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    shlibpath_overrides_runpath=yes
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action_GCJ=
+if test -n "$hardcode_libdir_flag_spec_GCJ" || \
+   test -n "$runpath_var_GCJ" || \
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct_GCJ" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
+     test "$hardcode_minus_L_GCJ" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_GCJ=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_GCJ=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_GCJ=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
+echo "${ECHO_T}$hardcode_action_GCJ" >&6
+
+if test "$hardcode_action_GCJ" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_GCJ \
+    CC_GCJ \
+    LD_GCJ \
+    lt_prog_compiler_wl_GCJ \
+    lt_prog_compiler_pic_GCJ \
+    lt_prog_compiler_static_GCJ \
+    lt_prog_compiler_no_builtin_flag_GCJ \
+    export_dynamic_flag_spec_GCJ \
+    thread_safe_flag_spec_GCJ \
+    whole_archive_flag_spec_GCJ \
+    enable_shared_with_static_runtimes_GCJ \
+    old_archive_cmds_GCJ \
+    old_archive_from_new_cmds_GCJ \
+    predep_objects_GCJ \
+    postdep_objects_GCJ \
+    predeps_GCJ \
+    postdeps_GCJ \
+    compiler_lib_search_path_GCJ \
+    archive_cmds_GCJ \
+    archive_expsym_cmds_GCJ \
+    postinstall_cmds_GCJ \
+    postuninstall_cmds_GCJ \
+    old_archive_from_expsyms_cmds_GCJ \
+    allow_undefined_flag_GCJ \
+    no_undefined_flag_GCJ \
+    export_symbols_cmds_GCJ \
+    hardcode_libdir_flag_spec_GCJ \
+    hardcode_libdir_flag_spec_ld_GCJ \
+    hardcode_libdir_separator_GCJ \
+    hardcode_automatic_GCJ \
+    module_cmds_GCJ \
+    module_expsym_cmds_GCJ \
+    lt_cv_prog_compiler_c_o_GCJ \
+    exclude_expsyms_GCJ \
+    include_expsyms_GCJ; do
+
+    case $var in
+    old_archive_cmds_GCJ | \
+    old_archive_from_new_cmds_GCJ | \
+    archive_cmds_GCJ | \
+    archive_expsym_cmds_GCJ | \
+    module_cmds_GCJ | \
+    module_expsym_cmds_GCJ | \
+    old_archive_from_expsyms_cmds_GCJ | \
+    export_symbols_cmds_GCJ | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_GCJ
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_GCJ
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_GCJ
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_GCJ
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_GCJ
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_GCJ
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_GCJ
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_GCJ
+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_GCJ
+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_GCJ
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_GCJ
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_GCJ
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_GCJ
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_GCJ
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_GCJ
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_GCJ
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_GCJ
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_GCJ
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_GCJ"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_GCJ
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_GCJ
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_GCJ
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	else
+	  tagname=""
+	fi
+	;;
+
+      RC)
+
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+compiler_RC=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+lt_cv_prog_compiler_c_o_RC=yes
+
+# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+  # See if we are running on zsh, and set the options which allow our commands through
+  # without removal of \ escapes.
+  if test -n "${ZSH_VERSION+set}" ; then
+    setopt NO_GLOB_SUBST
+  fi
+  # Now quote all the things that may contain metacharacters while being
+  # careful not to overquote the AC_SUBSTed values.  We take copies of the
+  # variables and quote the copies for generation of the libtool script.
+  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
+    SED SHELL STRIP \
+    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+    deplibs_check_method reload_flag reload_cmds need_locks \
+    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+    lt_cv_sys_global_symbol_to_c_name_address \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    old_postinstall_cmds old_postuninstall_cmds \
+    compiler_RC \
+    CC_RC \
+    LD_RC \
+    lt_prog_compiler_wl_RC \
+    lt_prog_compiler_pic_RC \
+    lt_prog_compiler_static_RC \
+    lt_prog_compiler_no_builtin_flag_RC \
+    export_dynamic_flag_spec_RC \
+    thread_safe_flag_spec_RC \
+    whole_archive_flag_spec_RC \
+    enable_shared_with_static_runtimes_RC \
+    old_archive_cmds_RC \
+    old_archive_from_new_cmds_RC \
+    predep_objects_RC \
+    postdep_objects_RC \
+    predeps_RC \
+    postdeps_RC \
+    compiler_lib_search_path_RC \
+    archive_cmds_RC \
+    archive_expsym_cmds_RC \
+    postinstall_cmds_RC \
+    postuninstall_cmds_RC \
+    old_archive_from_expsyms_cmds_RC \
+    allow_undefined_flag_RC \
+    no_undefined_flag_RC \
+    export_symbols_cmds_RC \
+    hardcode_libdir_flag_spec_RC \
+    hardcode_libdir_flag_spec_ld_RC \
+    hardcode_libdir_separator_RC \
+    hardcode_automatic_RC \
+    module_cmds_RC \
+    module_expsym_cmds_RC \
+    lt_cv_prog_compiler_c_o_RC \
+    exclude_expsyms_RC \
+    include_expsyms_RC; do
+
+    case $var in
+    old_archive_cmds_RC | \
+    old_archive_from_new_cmds_RC | \
+    archive_cmds_RC | \
+    archive_expsym_cmds_RC | \
+    module_cmds_RC | \
+    module_expsym_cmds_RC | \
+    old_archive_from_expsyms_cmds_RC | \
+    export_symbols_cmds_RC | \
+    extract_expsyms_cmds | reload_cmds | finish_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case $lt_echo in
+  *'\$0 --fallback-echo"')
+    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+cfgfile="$ofile"
+
+  cat <<__EOF__ >> "$cfgfile"
+# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A C compiler.
+LTCC=$lt_LTCC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_LTCFLAGS
+
+# A language-specific compiler.
+CC=$lt_compiler_RC
+
+# Is the compiler the GNU C compiler?
+with_gcc=$GCC_RC
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# The linker used to build libraries.
+LD=$lt_LD_RC
+
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+
+# A BSD-compatible nm program.
+NM=$lt_NM
+
+# A symbol stripping program
+STRIP=$lt_STRIP
+
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_RC
+
+# Object file suffix (normally "o").
+objext="$ac_objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_RC
+pic_mode=$pic_mode
+
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_RC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_old_archive_cmds_RC
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_predep_objects_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_postdep_objects_RC
+
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_predeps_RC
+
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_postdeps_RC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_RC
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_RC
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_RC
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
+
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct_RC
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L_RC
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$hardcode_automatic_RC
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_RC
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path_RC"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols_RC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_RC
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_RC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_RC
+
+# ### END LIBTOOL TAG CONFIG: $tagname
+
+__EOF__
+
+
+else
+  # If there is no Makefile yet, we rely on a make rule to execute
+  # `config.status --recheck' to rerun these tests and create the
+  # libtool script then.
+  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+  if test -f "$ltmain_in"; then
+    test -f Makefile && make "$ltmain"
+  fi
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+	;;
+
+      *)
+	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
+echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
+   { (exit 1); exit 1; }; }
+	;;
+      esac
+
+      # Append the new tag name to the list of available tags.
+      if test -n "$tagname" ; then
+      available_tags="$available_tags $tagname"
+    fi
+    fi
+  done
+  IFS="$lt_save_ifs"
+
+  # Now substitute the updated list of available tags.
+  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+    mv "${ofile}T" "$ofile"
+    chmod +x "$ofile"
+  else
+    rm -f "${ofile}T"
+    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
+echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+fi
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+# Prevent multiple expansion
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether some low-level functions/files are available
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_header_stdc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then
+  :
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then
+  :
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      exit(2);
+  exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+
+# These are tested for by AC_HEADER_STDC, but I check again to set the var
+if test "${ac_cv_header_stdint_h+set}" = set; then
+  echo "$as_me:$LINENO: checking for stdint.h" >&5
+echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6
+if test "${ac_cv_header_stdint_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdint_h" >&5
+echo "${ECHO_T}$ac_cv_header_stdint_h" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking stdint.h usability" >&5
+echo $ECHO_N "checking stdint.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <stdint.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking stdint.h presence" >&5
+echo $ECHO_N "checking stdint.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdint.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: stdint.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: stdint.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: stdint.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: stdint.h: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: stdint.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: stdint.h: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: stdint.h:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: stdint.h:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: stdint.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: stdint.h: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: stdint.h:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: stdint.h:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: stdint.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: stdint.h: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: stdint.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: stdint.h: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to opensource@google.com ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for stdint.h" >&5
+echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6
+if test "${ac_cv_header_stdint_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_header_stdint_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdint_h" >&5
+echo "${ECHO_T}$ac_cv_header_stdint_h" >&6
+
+fi
+if test $ac_cv_header_stdint_h = yes; then
+  ac_cv_have_stdint_h=1
+else
+  ac_cv_have_stdint_h=0
+fi
+
+
+if test "${ac_cv_header_sys_types_h+set}" = set; then
+  echo "$as_me:$LINENO: checking for sys/types.h" >&5
+echo $ECHO_N "checking for sys/types.h... $ECHO_C" >&6
+if test "${ac_cv_header_sys_types_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_types_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_types_h" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking sys/types.h usability" >&5
+echo $ECHO_N "checking sys/types.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <sys/types.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking sys/types.h presence" >&5
+echo $ECHO_N "checking sys/types.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <sys/types.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: sys/types.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: sys/types.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: sys/types.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: sys/types.h: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: sys/types.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: sys/types.h: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: sys/types.h:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: sys/types.h:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: sys/types.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: sys/types.h: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: sys/types.h:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: sys/types.h:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: sys/types.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: sys/types.h: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: sys/types.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: sys/types.h: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to opensource@google.com ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for sys/types.h" >&5
+echo $ECHO_N "checking for sys/types.h... $ECHO_C" >&6
+if test "${ac_cv_header_sys_types_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_header_sys_types_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_types_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_types_h" >&6
+
+fi
+if test $ac_cv_header_sys_types_h = yes; then
+  ac_cv_have_systypes_h=1
+else
+  ac_cv_have_systypes_h=0
+fi
+
+
+if test "${ac_cv_header_inttypes_h+set}" = set; then
+  echo "$as_me:$LINENO: checking for inttypes.h" >&5
+echo $ECHO_N "checking for inttypes.h... $ECHO_C" >&6
+if test "${ac_cv_header_inttypes_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_inttypes_h" >&5
+echo "${ECHO_T}$ac_cv_header_inttypes_h" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking inttypes.h usability" >&5
+echo $ECHO_N "checking inttypes.h usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <inttypes.h>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking inttypes.h presence" >&5
+echo $ECHO_N "checking inttypes.h presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <inttypes.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: inttypes.h: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: inttypes.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: inttypes.h: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: inttypes.h: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: inttypes.h: present but cannot be compiled" >&5
+echo "$as_me: WARNING: inttypes.h: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: inttypes.h:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: inttypes.h:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: inttypes.h: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: inttypes.h: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: inttypes.h:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: inttypes.h:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: inttypes.h: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: inttypes.h: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: inttypes.h: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: inttypes.h: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to opensource@google.com ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for inttypes.h" >&5
+echo $ECHO_N "checking for inttypes.h... $ECHO_C" >&6
+if test "${ac_cv_header_inttypes_h+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_cv_header_inttypes_h=$ac_header_preproc
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_inttypes_h" >&5
+echo "${ECHO_T}$ac_cv_header_inttypes_h" >&6
+
+fi
+if test $ac_cv_header_inttypes_h = yes; then
+  ac_cv_have_inttypes_h=1
+else
+  ac_cv_have_inttypes_h=0
+fi
+
+
+
+for ac_header in syscall.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to opensource@google.com ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in sys/syscall.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to opensource@google.com ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+# For backtrace with glibc.
+# TODO(hamaji): Support other platforms using libgcc.
+
+for ac_header in execinfo.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+  # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_header_compiler=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } >/dev/null; then
+  if test -s conftest.err; then
+    ac_cpp_err=$ac_c_preproc_warn_flag
+    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+  else
+    ac_cpp_err=
+  fi
+else
+  ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+  ac_header_preproc=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+  yes:no: )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+    ac_header_preproc=yes
+    ;;
+  no:yes:* )
+    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+    (
+      cat <<\_ASBOX
+## ------------------------------------ ##
+## Report this to opensource@google.com ##
+## ------------------------------------ ##
+_ASBOX
+    ) |
+      sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+  cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+echo "$as_me:$LINENO: checking for void *" >&5
+echo $ECHO_N "checking for void *... $ECHO_C" >&6
+if test "${ac_cv_type_void_p+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((void * *) 0)
+  return 0;
+if (sizeof (void *))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type_void_p=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_void_p=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5
+echo "${ECHO_T}$ac_cv_type_void_p" >&6
+
+echo "$as_me:$LINENO: checking size of void *" >&5
+echo $ECHO_N "checking size of void *... $ECHO_C" >&6
+if test "${ac_cv_sizeof_void_p+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test "$ac_cv_type_void_p" = yes; then
+  # The cast to unsigned long works around a bug in the HP C Compiler
+  # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+  # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+  # This bug is HP SR number 8606223364.
+  if test "$cross_compiling" = yes; then
+  # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+		    if test $ac_lo -le $ac_mid; then
+		      ac_lo= ac_hi=
+		      break
+		    fi
+		    ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) < 0)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_lo=$ac_mid; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+		       if test $ac_mid -le $ac_hi; then
+			 ac_lo= ac_hi=
+			 break
+		       fi
+		       ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
+test_array [0] = 0
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_hi=$ac_mid
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_void_p=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; } ;;
+esac
+else
+  if test "$cross_compiling" = yes; then
+  { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+   { (exit 1); exit 1; }; }
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+long longval () { return (long) (sizeof (void *)); }
+unsigned long ulongval () { return (long) (sizeof (void *)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    exit (1);
+  if (((long) (sizeof (void *))) < 0)
+    {
+      long i = longval ();
+      if (i != ((long) (sizeof (void *))))
+	exit (1);
+      fprintf (f, "%ld\n", i);
+    }
+  else
+    {
+      unsigned long i = ulongval ();
+      if (i != ((long) (sizeof (void *))))
+	exit (1);
+      fprintf (f, "%lu\n", i);
+    }
+  exit (ferror (f) || fclose (f) != 0);
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_sizeof_void_p=`cat conftest.val`
+else
+  echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+  ac_cv_sizeof_void_p=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5
+echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
+_ACEOF
+
+
+
+# These are the types I need.  We look for them in either stdint.h,
+# sys/types.h, or inttypes.h, all of which are part of the default-includes.
+echo "$as_me:$LINENO: checking for uint16_t" >&5
+echo $ECHO_N "checking for uint16_t... $ECHO_C" >&6
+if test "${ac_cv_type_uint16_t+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((uint16_t *) 0)
+  return 0;
+if (sizeof (uint16_t))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type_uint16_t=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_uint16_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_uint16_t" >&5
+echo "${ECHO_T}$ac_cv_type_uint16_t" >&6
+if test $ac_cv_type_uint16_t = yes; then
+  ac_cv_have_uint16_t=1
+else
+  ac_cv_have_uint16_t=0
+fi
+
+echo "$as_me:$LINENO: checking for u_int16_t" >&5
+echo $ECHO_N "checking for u_int16_t... $ECHO_C" >&6
+if test "${ac_cv_type_u_int16_t+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((u_int16_t *) 0)
+  return 0;
+if (sizeof (u_int16_t))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type_u_int16_t=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_u_int16_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_u_int16_t" >&5
+echo "${ECHO_T}$ac_cv_type_u_int16_t" >&6
+if test $ac_cv_type_u_int16_t = yes; then
+  ac_cv_have_u_int16_t=1
+else
+  ac_cv_have_u_int16_t=0
+fi
+
+echo "$as_me:$LINENO: checking for __uint16" >&5
+echo $ECHO_N "checking for __uint16... $ECHO_C" >&6
+if test "${ac_cv_type___uint16+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+if ((__uint16 *) 0)
+  return 0;
+if (sizeof (__uint16))
+  return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_type___uint16=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type___uint16=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type___uint16" >&5
+echo "${ECHO_T}$ac_cv_type___uint16" >&6
+if test $ac_cv_type___uint16 = yes; then
+  ac_cv_have___uint16=1
+else
+  ac_cv_have___uint16=0
+fi
+
+
+echo "$as_me:$LINENO: checking for sigaltstack" >&5
+echo $ECHO_N "checking for sigaltstack... $ECHO_C" >&6
+if test "${ac_cv_func_sigaltstack+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+/* Define sigaltstack to an innocuous variant, in case <limits.h> declares sigaltstack.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define sigaltstack innocuous_sigaltstack
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char sigaltstack (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef sigaltstack
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char sigaltstack ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_sigaltstack) || defined (__stub___sigaltstack)
+choke me
+#else
+char (*f) () = sigaltstack;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != sigaltstack;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_func_sigaltstack=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_sigaltstack=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_sigaltstack" >&5
+echo "${ECHO_T}$ac_cv_func_sigaltstack" >&6
+if test $ac_cv_func_sigaltstack = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_SIGALTSTACK 1
+_ACEOF
+
+fi
+
+
+
+  echo "$as_me:$LINENO: checking for __attribute__" >&5
+echo $ECHO_N "checking for __attribute__... $ECHO_C" >&6
+  if test "${ac_cv___attribute__+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <stdlib.h>
+       static void foo(void) __attribute__ ((unused));
+       void foo(void) { exit(1); }
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv___attribute__=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv___attribute__=no
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+  if test "$ac_cv___attribute__" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE___ATTRIBUTE__ 1
+_ACEOF
+
+  fi
+  echo "$as_me:$LINENO: result: $ac_cv___attribute__" >&5
+echo "${ECHO_T}$ac_cv___attribute__" >&6
+
+# We only care about these two attributes.
+if test x"$ac_cv___attribute__" = x"yes"; then
+  ac_cv___attribute___noreturn="__attribute__ ((noreturn))"
+  ac_cv___attribute___printf_4_5="__attribute__((__format__ (__printf__, 4, 5)))"
+else
+  ac_cv___attribute___noreturn=
+  ac_cv___attribute___printf_4_5=
+fi
+
+
+  echo "$as_me:$LINENO: checking for __builtin_expect" >&5
+echo $ECHO_N "checking for __builtin_expect... $ECHO_C" >&6
+  if test "${ac_cv___builtin_expect+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+int foo(void) { if (__builtin_expect(0, 0)) return 1; return 0; }
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv___builtin_expect=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv___builtin_expect=no
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+  if test "$ac_cv___builtin_expect" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE___BUILTIN_EXPECT 1
+_ACEOF
+
+  fi
+  echo "$as_me:$LINENO: result: $ac_cv___builtin_expect" >&5
+echo "${ECHO_T}$ac_cv___builtin_expect" >&6
+
+if test x"$ac_cv___builtin_expect" = x"yes"; then
+  ac_cv_have___builtin_expect=1
+else
+  ac_cv_have___builtin_expect=0
+fi
+
+# On x86_64, instead of libunwind, we can choose to compile with frame-pointers
+# (This isn't needed on i386, where -fno-omit-frame-pointer is the default).
+# Check whether --enable-frame_pointers or --disable-frame_pointers was given.
+if test "${enable_frame_pointers+set}" = set; then
+  enableval="$enable_frame_pointers"
+  enable_frame_pointers=no
+fi;
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+return __x86_64__ == 1 ? 0 : 1
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  is_x86_64=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+is_x86_64=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+if test "$enable_frame_pointers" = yes; then
+  ENABLE_FRAME_POINTERS_TRUE=
+  ENABLE_FRAME_POINTERS_FALSE='#'
+else
+  ENABLE_FRAME_POINTERS_TRUE='#'
+  ENABLE_FRAME_POINTERS_FALSE=
+fi
+
+
+
+if test "$is_x86_64" = yes; then
+  X86_64_TRUE=
+  X86_64_FALSE='#'
+else
+  X86_64_TRUE='#'
+  X86_64_FALSE=
+fi
+
+
+# Some of the code in this directory depends on pthreads
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+acx_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        echo "$as_me:$LINENO: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5
+echo $ECHO_N "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... $ECHO_C" >&6
+        cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+/* Override any gcc2 internal prototype to avoid an error.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+   builtin and then its argument prototype would still apply.  */
+char pthread_join ();
+int
+main ()
+{
+pthread_join ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  acx_pthread_ok=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+        echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5
+echo "${ECHO_T}$acx_pthread_ok" >&6
+        if test x"$acx_pthread_ok" = xno; then
+                PTHREAD_LIBS=""
+                PTHREAD_CFLAGS=""
+        fi
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try.  Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important.  Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+#       other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+#      doesn't hurt to check since this sometimes defines pthreads too;
+#      also defines -D_REENTRANT)
+#      ... -mt is also the pthreads flag for HP/aCC
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case "${host_cpu}-${host_os}" in
+        *solaris*)
+
+        # On Solaris (at least, for some versions), libc contains stubbed
+        # (non-functional) versions of the pthreads routines, so link-based
+        # tests will erroneously succeed.  (We need to link with -pthreads/-mt/
+        # -lpthread.)  (The stubs are missing pthread_cleanup_push, or rather
+        # a function called by this macro, so we could check for that, but
+        # who knows whether they'll stub that too in a future libc.)  So,
+        # we'll just look for -pthreads and -lpthread first:
+
+        acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
+        ;;
+esac
+
+if test x"$acx_pthread_ok" = xno; then
+for flag in $acx_pthread_flags; do
+
+        case $flag in
+                none)
+                echo "$as_me:$LINENO: checking whether pthreads work without any flags" >&5
+echo $ECHO_N "checking whether pthreads work without any flags... $ECHO_C" >&6
+                ;;
+
+                -*)
+                echo "$as_me:$LINENO: checking whether pthreads work with $flag" >&5
+echo $ECHO_N "checking whether pthreads work with $flag... $ECHO_C" >&6
+                PTHREAD_CFLAGS="$flag"
+                ;;
+
+		pthread-config)
+		# Extract the first word of "pthread-config", so it can be a program name with args.
+set dummy pthread-config; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_acx_pthread_config+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$acx_pthread_config"; then
+  ac_cv_prog_acx_pthread_config="$acx_pthread_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_acx_pthread_config="yes"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+  test -z "$ac_cv_prog_acx_pthread_config" && ac_cv_prog_acx_pthread_config="no"
+fi
+fi
+acx_pthread_config=$ac_cv_prog_acx_pthread_config
+if test -n "$acx_pthread_config"; then
+  echo "$as_me:$LINENO: result: $acx_pthread_config" >&5
+echo "${ECHO_T}$acx_pthread_config" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+		if test x"$acx_pthread_config" = xno; then continue; fi
+		PTHREAD_CFLAGS="`pthread-config --cflags`"
+		PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+		;;
+
+                *)
+                echo "$as_me:$LINENO: checking for the pthreads library -l$flag" >&5
+echo $ECHO_N "checking for the pthreads library -l$flag... $ECHO_C" >&6
+                PTHREAD_LIBS="-l$flag"
+                ;;
+        esac
+
+        save_LIBS="$LIBS"
+        save_CFLAGS="$CFLAGS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+        # Check for various functions.  We must include pthread.h,
+        # since some functions may be macros.  (On the Sequent, we
+        # need a special flag -Kthread to make this header compile.)
+        # We check for pthread_join because it is in -lpthread on IRIX
+        # while pthread_create is in libc.  We check for pthread_attr_init
+        # due to DEC craziness with -lpthreads.  We check for
+        # pthread_cleanup_push because it is one of the few pthread
+        # functions on Solaris that doesn't have a non-functional libc stub.
+        # We try pthread_create on general principles.
+        cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <pthread.h>
+int
+main ()
+{
+pthread_t th; pthread_join(th, 0);
+                     pthread_attr_init(0); pthread_cleanup_push(0, 0);
+                     pthread_create(0,0,0,0); pthread_cleanup_pop(0);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  acx_pthread_ok=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+
+        echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5
+echo "${ECHO_T}$acx_pthread_ok" >&6
+        if test "x$acx_pthread_ok" = xyes; then
+                break;
+        fi
+
+        PTHREAD_LIBS=""
+        PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$acx_pthread_ok" = xyes; then
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+        # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+	echo "$as_me:$LINENO: checking for joinable pthread attribute" >&5
+echo $ECHO_N "checking for joinable pthread attribute... $ECHO_C" >&6
+	attr_name=unknown
+	for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+	    cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <pthread.h>
+int
+main ()
+{
+int attr=$attr; return attr;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  attr_name=$attr; break
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+	done
+        echo "$as_me:$LINENO: result: $attr_name" >&5
+echo "${ECHO_T}$attr_name" >&6
+        if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+
+cat >>confdefs.h <<_ACEOF
+#define PTHREAD_CREATE_JOINABLE $attr_name
+_ACEOF
+
+        fi
+
+        echo "$as_me:$LINENO: checking if more special flags are required for pthreads" >&5
+echo $ECHO_N "checking if more special flags are required for pthreads... $ECHO_C" >&6
+        flag=no
+        case "${host_cpu}-${host_os}" in
+            *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
+            *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
+        esac
+        echo "$as_me:$LINENO: result: ${flag}" >&5
+echo "${ECHO_T}${flag}" >&6
+        if test "x$flag" != xno; then
+            PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+        fi
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+        # More AIX lossage: must compile with xlc_r or cc_r
+	if test x"$GCC" != xyes; then
+          for ac_prog in xlc_r cc_r
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_PTHREAD_CC+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$PTHREAD_CC"; then
+  ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_PTHREAD_CC="$ac_prog"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+
+fi
+fi
+PTHREAD_CC=$ac_cv_prog_PTHREAD_CC
+if test -n "$PTHREAD_CC"; then
+  echo "$as_me:$LINENO: result: $PTHREAD_CC" >&5
+echo "${ECHO_T}$PTHREAD_CC" >&6
+else
+  echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+  test -n "$PTHREAD_CC" && break
+done
+test -n "$PTHREAD_CC" || PTHREAD_CC="${CC}"
+
+        else
+          PTHREAD_CC=$CC
+	fi
+
+   # The next part tries to detect GCC inconsistency with -shared on some
+   # architectures and systems. The problem is that in certain
+   # configurations, when -shared is specified, GCC "forgets" to
+   # internally use various flags which are still necessary.
+
+   echo "$as_me:$LINENO: checking whether to check for GCC pthread/shared inconsistencies" >&5
+echo $ECHO_N "checking whether to check for GCC pthread/shared inconsistencies... $ECHO_C" >&6
+   check_inconsistencies=yes
+   case "${host_cpu}-${host_os}" in
+     *-darwin*) check_inconsistencies=no ;;
+   esac
+   if test x"$GCC" != xyes -o "x$check_inconsistencies" != xyes ; then
+      echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+   else
+      echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+      # In order not to create several levels of indentation, we test
+      # the value of "$ok" until we find out the cure or run out of
+      # ideas.
+      ok="no"
+
+      #
+      # Prepare the flags
+      #
+      save_CFLAGS="$CFLAGS"
+      save_LIBS="$LIBS"
+      save_CC="$CC"
+      # Try with the flags determined by the earlier checks.
+      #
+      # -Wl,-z,defs forces link-time symbol resolution, so that the
+      # linking checks with -shared actually have any value
+      #
+      # FIXME: -fPIC is required for -shared on many architectures,
+      # so we specify it here, but the right way would probably be to
+      # properly detect whether it is actually required.
+      CFLAGS="-shared -fPIC -Wl,-z,defs $CFLAGS $PTHREAD_CFLAGS"
+      LIBS="$PTHREAD_LIBS $LIBS"
+      CC="$PTHREAD_CC"
+
+      echo "$as_me:$LINENO: checking whether -pthread is sufficient with -shared" >&5
+echo $ECHO_N "checking whether -pthread is sufficient with -shared... $ECHO_C" >&6
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <pthread.h>
+int
+main ()
+{
+pthread_t th; pthread_join(th, 0);
+         pthread_attr_init(0); pthread_cleanup_push(0, 0);
+         pthread_create(0,0,0,0); pthread_cleanup_pop(0);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ok=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+
+      if test "x$ok" = xyes; then
+         echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+      else
+         echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+      fi
+
+      #
+      # Linux gcc on some architectures such as mips/mipsel forgets
+      # about -lpthread
+      #
+      if test x"$ok" = xno; then
+         echo "$as_me:$LINENO: checking whether -lpthread fixes that" >&5
+echo $ECHO_N "checking whether -lpthread fixes that... $ECHO_C" >&6
+         LIBS="-lpthread $PTHREAD_LIBS $save_LIBS"
+         cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <pthread.h>
+int
+main ()
+{
+pthread_t th; pthread_join(th, 0);
+            pthread_attr_init(0); pthread_cleanup_push(0, 0);
+            pthread_create(0,0,0,0); pthread_cleanup_pop(0);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ok=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+
+         if test "x$ok" = xyes; then
+            echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+            PTHREAD_LIBS="-lpthread $PTHREAD_LIBS"
+         else
+            echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+         fi
+      fi
+      #
+      # FreeBSD 4.10 gcc forgets to use -lc_r instead of -lc
+      #
+      if test x"$ok" = xno; then
+         echo "$as_me:$LINENO: checking whether -lc_r fixes that" >&5
+echo $ECHO_N "checking whether -lc_r fixes that... $ECHO_C" >&6
+         LIBS="-lc_r $PTHREAD_LIBS $save_LIBS"
+         cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <pthread.h>
+int
+main ()
+{
+pthread_t th; pthread_join(th, 0);
+              pthread_attr_init(0); pthread_cleanup_push(0, 0);
+              pthread_create(0,0,0,0); pthread_cleanup_pop(0);
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ok=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+
+         if test "x$ok" = xyes; then
+            echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+            PTHREAD_LIBS="-lc_r $PTHREAD_LIBS"
+         else
+            echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+         fi
+      fi
+      if test x"$ok" = xno; then
+         # OK, we have run out of ideas
+         { echo "$as_me:$LINENO: WARNING: Impossible to determine how to use pthreads with shared libraries" >&5
+echo "$as_me: WARNING: Impossible to determine how to use pthreads with shared libraries" >&2;}
+
+         # so it's not safe to assume that we may use pthreads
+         acx_pthread_ok=no
+      fi
+
+      CFLAGS="$save_CFLAGS"
+      LIBS="$save_LIBS"
+      CC="$save_CC"
+   fi
+else
+        PTHREAD_CC="$CC"
+fi
+
+
+
+
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$acx_pthread_ok" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_PTHREAD 1
+_ACEOF
+
+        :
+else
+        acx_pthread_ok=no
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Check if there is google-gflags library installed.
+echo "$as_me:$LINENO: checking for main in -lgflags" >&5
+echo $ECHO_N "checking for main in -lgflags... $ECHO_C" >&6
+if test "${ac_cv_lib_gflags_main+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgflags  $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+main ();
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+  (eval $ac_link) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest$ac_exeext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_lib_gflags_main=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_gflags_main=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+      conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_gflags_main" >&5
+echo "${ECHO_T}$ac_cv_lib_gflags_main" >&6
+if test $ac_cv_lib_gflags_main = yes; then
+  ac_cv_have_libgflags=1
+else
+  ac_cv_have_libgflags=0
+fi
+
+if test x"$ac_cv_have_libgflags" = x"1"; then
+  GFLAGS_LIBS=-lgflags
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LIB_GFLAGS 1
+_ACEOF
+
+else
+  GFLAGS_LIBS=
+fi
+
+# We'd like to use read/write locks in several places in the code.
+# See if our pthreads support extends to that.  Note: for linux, it
+# does as long as you define _XOPEN_SOURCE appropriately.
+echo "$as_me:$LINENO: checking support for pthread_rwlock_* functions" >&5
+echo $ECHO_N "checking support for pthread_rwlock_* functions... $ECHO_C" >&6
+if test "${ac_rwlock+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#define _XOPEN_SOURCE 500
+                 #include <pthread.h>
+int
+main ()
+{
+pthread_rwlock_t l; pthread_rwlock_init(&l, NULL);
+                 pthread_rwlock_rdlock(&l);
+                 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_rwlock=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_rwlock=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+fi
+echo "$as_me:$LINENO: result: $ac_rwlock" >&5
+echo "${ECHO_T}$ac_rwlock" >&6
+if test "$ac_rwlock" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_RWLOCK 1
+_ACEOF
+
+fi
+
+
+# Find out what namespace 'normal' STL code lives in, and also what namespace
+# the user wants our classes to be defined in
+echo "$as_me:$LINENO: checking whether the compiler implements namespaces" >&5
+echo $ECHO_N "checking whether the compiler implements namespaces... $ECHO_C" >&6
+if test "${ac_cv_cxx_namespaces+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+                  ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+                  cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+namespace Outer {
+                                    namespace Inner { int i = 0; }}
+int
+main ()
+{
+using namespace Outer::Inner; return i;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_cxx_namespaces=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_cxx_namespaces=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+                  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_namespaces" >&5
+echo "${ECHO_T}$ac_cv_cxx_namespaces" >&6
+  if test "$ac_cv_cxx_namespaces" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_NAMESPACES 1
+_ACEOF
+
+  fi
+echo "$as_me:$LINENO: checking what namespace STL code is in" >&5
+echo $ECHO_N "checking what namespace STL code is in... $ECHO_C" >&6
+if test "${ac_cv_cxx_stl_namespace+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+
+      ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <vector>
+int
+main ()
+{
+vector<int> t; return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_cxx_stl_namespace=none
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <vector>
+int
+main ()
+{
+std::vector<int> t; return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_cxx_stl_namespace=std
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+      ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_stl_namespace" >&5
+echo "${ECHO_T}$ac_cv_cxx_stl_namespace" >&6
+   if test "$ac_cv_cxx_stl_namespace" = none; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STL_NAMESPACE
+_ACEOF
+
+   fi
+   if test "$ac_cv_cxx_stl_namespace" = std; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STL_NAMESPACE std
+_ACEOF
+
+   fi
+
+google_namespace_default=google
+   # Check whether --enable-namespace or --disable-namespace was given.
+if test "${enable_namespace+set}" = set; then
+  enableval="$enable_namespace"
+  case "$enableval" in
+                    yes) google_namespace="$google_namespace_default" ;;
+                     no) google_namespace="" ;;
+                      *) google_namespace="$enableval" ;;
+                  esac
+else
+  google_namespace="$google_namespace_default"
+fi;
+   if test -n "$google_namespace"; then
+     ac_google_namespace="$google_namespace"
+     ac_google_start_namespace="namespace $google_namespace {"
+     ac_google_end_namespace="}"
+   else
+     ac_google_namespace=""
+     ac_google_start_namespace=""
+     ac_google_end_namespace=""
+   fi
+
+cat >>confdefs.h <<_ACEOF
+#define GOOGLE_NAMESPACE $ac_google_namespace
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define _START_GOOGLE_NAMESPACE_ $ac_google_start_namespace
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define _END_GOOGLE_NAMESPACE_ $ac_google_end_namespace
+_ACEOF
+
+
+
+echo "$as_me:$LINENO: checking whether compiler supports using ::operator<<" >&5
+echo $ECHO_N "checking whether compiler supports using ::operator<<... $ECHO_C" >&6
+if test "${ac_cv_cxx_using_operator+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+       ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+       cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+#include <iostream>
+                       std::ostream& operator<<(std::ostream&, struct s);
+int
+main ()
+{
+using ::operator<<; return 0;
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+  (eval $ac_compile) 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_cxx_using_operator=1
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_cxx_using_operator=0
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+      ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_using_operator" >&5
+echo "${ECHO_T}$ac_cv_cxx_using_operator" >&6
+  if test "$ac_cv_cxx_using_operator" = 1; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_USING_OPERATOR 1
+_ACEOF
+
+  fi
+
+# These are what's needed by logging.h.in and raw_logging.h.in
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Write generated configuration file
+                                                  ac_config_files="$ac_config_files Makefile src/glog/logging.h src/glog/raw_logging.h src/glog/vlog_is_on.h src/glog/stl_logging.h"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+  (set) 2>&1 |
+    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+    *ac_space=\ *)
+      # `set' does not quote correctly, so add quotes (double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \).
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;;
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n \
+	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      ;;
+    esac;
+} |
+  sed '
+     t clear
+     : clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+  if test -w $cache_file; then
+    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+    cat confcache >$cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[	 ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[	 ]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_i=`echo "$ac_i" |
+	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+  # 2. Add them.
+  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${GCC_TRUE}" && test -z "${GCC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"GCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"GCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${ENABLE_FRAME_POINTERS_TRUE}" && test -z "${ENABLE_FRAME_POINTERS_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"ENABLE_FRAME_POINTERS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"ENABLE_FRAME_POINTERS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+if test -z "${X86_64_TRUE}" && test -z "${X86_64_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"X86_64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"X86_64\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization.  ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+  set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  as_unset=unset
+else
+  as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+  LC_TELEPHONE LC_TIME
+do
+  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+    eval $as_var=C; export $as_var
+  else
+    $as_unset $as_var
+  fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)$' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\/\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
+  # Find who we are.  Look in the path if we contain no path at all
+  # relative or not.
+  case $0 in
+    *[\\/]* ) as_myself=$0 ;;
+    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+       ;;
+  esac
+  # We did not find ourselves, most probably we were run as `sh COMMAND'
+  # in which case we are not to be found in the path.
+  if test "x$as_myself" = x; then
+    as_myself=$0
+  fi
+  if test ! -f "$as_myself"; then
+    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+   { (exit 1); exit 1; }; }
+  fi
+  case $CONFIG_SHELL in
+  '')
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for as_base in sh bash ksh sh5; do
+	 case $as_dir in
+	 /*)
+	   if ("$as_dir/$as_base" -c '
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
+	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+	     CONFIG_SHELL=$as_dir/$as_base
+	     export CONFIG_SHELL
+	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+	   fi;;
+	 esac
+       done
+done
+;;
+  esac
+
+  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+  # uniformly replaced by the line number.  The first 'sed' inserts a
+  # line-number line before each line; the second 'sed' does the real
+  # work.  The second script uses 'N' to pair each line-number line
+  # with the numbered line, and appends trailing '-' during
+  # substitution so that $LINENO is not a special case at line end.
+  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
+  sed '=' <$as_myself |
+    sed '
+      N
+      s,$,-,
+      : loop
+      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      t loop
+      s,-$,,
+      s,^['$as_cr_digits']*\n,,
+    ' >$as_me.lineno &&
+  chmod +x $as_me.lineno ||
+    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+   { (exit 1); exit 1; }; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensible to this).
+  . ./$as_me.lineno
+  # Exit status is that of the last command.
+  exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+  *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T='	' ;;
+  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+  # We could just check for DJGPP; but this test a) works b) is more generic
+  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+  if test -f conf$$.exe; then
+    # Don't use ln at all; we don't have any links
+    as_ln_s='cp -p'
+  else
+    as_ln_s='ln -s'
+  fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+  as_ln_s=ln
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p=:
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" 	$as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.  Logging --version etc. is OK.
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by glog $as_me 0.1, which was
+generated by GNU Autoconf 2.59.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number, then exit
+  -q, --quiet      do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+  --file=FILE[:TEMPLATE]
+		   instantiate the configuration file FILE
+  --header=FILE[:TEMPLATE]
+		   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+glog config.status 0.1
+configured by $0, generated by GNU Autoconf 2.59,
+  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value.  By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "x$1" : 'x\([^=]*\)='`
+    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  -*)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  *) # This is not an option, so the user has probably given explicit
+     # arguments.
+     ac_option=$1
+     ac_need_defaults=false;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --vers* | -V )
+    echo "$ac_cs_version"; exit 0 ;;
+  --he | --h)
+    # Conflict between --help and --header
+    { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit 0 ;;
+  --debug | --d* | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    ac_need_defaults=false;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+   { (exit 1); exit 1; }; } ;;
+
+  *) ac_config_targets="$ac_config_targets $1" ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+  case "$ac_config_target" in
+  # Handling of arguments.
+  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+  "src/glog/logging.h" ) CONFIG_FILES="$CONFIG_FILES src/glog/logging.h" ;;
+  "src/glog/raw_logging.h" ) CONFIG_FILES="$CONFIG_FILES src/glog/raw_logging.h" ;;
+  "src/glog/vlog_is_on.h" ) CONFIG_FILES="$CONFIG_FILES src/glog/vlog_is_on.h" ;;
+  "src/glog/stl_logging.h" ) CONFIG_FILES="$CONFIG_FILES src/glog/stl_logging.h" ;;
+  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+  "src/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
+  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+   { (exit 1); exit 1; }; };;
+  esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./confstat$$-$RANDOM
+  (umask 077 && mkdir $tmp)
+} ||
+{
+   echo "$me: cannot create a temporary directory in ." >&2
+   { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+  # Protect against being on the right side of a sed subst in config.status.
+  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@CPP@,$CPP,;t t
+s,@CXX@,$CXX,;t t
+s,@CXXFLAGS@,$CXXFLAGS,;t t
+s,@ac_ct_CXX@,$ac_ct_CXX,;t t
+s,@CXXDEPMODE@,$CXXDEPMODE,;t t
+s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t
+s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t
+s,@GCC_TRUE@,$GCC_TRUE,;t t
+s,@GCC_FALSE@,$GCC_FALSE,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@EGREP@,$EGREP,;t t
+s,@LN_S@,$LN_S,;t t
+s,@ECHO@,$ECHO,;t t
+s,@AR@,$AR,;t t
+s,@ac_ct_AR@,$ac_ct_AR,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@CXXCPP@,$CXXCPP,;t t
+s,@F77@,$F77,;t t
+s,@FFLAGS@,$FFLAGS,;t t
+s,@ac_ct_F77@,$ac_ct_F77,;t t
+s,@LIBTOOL@,$LIBTOOL,;t t
+s,@LIBTOOL_DEPS@,$LIBTOOL_DEPS,;t t
+s,@ENABLE_FRAME_POINTERS_TRUE@,$ENABLE_FRAME_POINTERS_TRUE,;t t
+s,@ENABLE_FRAME_POINTERS_FALSE@,$ENABLE_FRAME_POINTERS_FALSE,;t t
+s,@X86_64_TRUE@,$X86_64_TRUE,;t t
+s,@X86_64_FALSE@,$X86_64_FALSE,;t t
+s,@acx_pthread_config@,$acx_pthread_config,;t t
+s,@PTHREAD_CC@,$PTHREAD_CC,;t t
+s,@PTHREAD_LIBS@,$PTHREAD_LIBS,;t t
+s,@PTHREAD_CFLAGS@,$PTHREAD_CFLAGS,;t t
+s,@ac_google_start_namespace@,$ac_google_start_namespace,;t t
+s,@ac_google_end_namespace@,$ac_google_end_namespace,;t t
+s,@ac_google_namespace@,$ac_google_namespace,;t t
+s,@ac_cv_cxx_using_operator@,$ac_cv_cxx_using_operator,;t t
+s,@ac_cv___attribute___noreturn@,$ac_cv___attribute___noreturn,;t t
+s,@ac_cv___attribute___printf_4_5@,$ac_cv___attribute___printf_4_5,;t t
+s,@ac_cv_have___builtin_expect@,$ac_cv_have___builtin_expect,;t t
+s,@ac_cv_have_stdint_h@,$ac_cv_have_stdint_h,;t t
+s,@ac_cv_have_systypes_h@,$ac_cv_have_systypes_h,;t t
+s,@ac_cv_have_inttypes_h@,$ac_cv_have_inttypes_h,;t t
+s,@ac_cv_have_uint16_t@,$ac_cv_have_uint16_t,;t t
+s,@ac_cv_have_u_int16_t@,$ac_cv_have_u_int16_t,;t t
+s,@ac_cv_have___uint16@,$ac_cv_have___uint16,;t t
+s,@ac_cv_have_libgflags@,$ac_cv_have_libgflags,;t t
+s,@GFLAGS_LIBS@,$GFLAGS_LIBS,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+  cat >>$CONFIG_STATUS <<\_ACEOF
+  # Split the substitutions into bite-sized pieces for seds with
+  # small command number limits, like on Digital OSF/1 and HP-UX.
+  ac_max_sed_lines=48
+  ac_sed_frag=1 # Number of current file.
+  ac_beg=1 # First line for current file.
+  ac_end=$ac_max_sed_lines # Line after last line for current file.
+  ac_more_lines=:
+  ac_sed_cmds=
+  while $ac_more_lines; do
+    if test $ac_beg -gt 1; then
+      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    else
+      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+    fi
+    if test ! -s $tmp/subs.frag; then
+      ac_more_lines=false
+    else
+      # The purpose of the label and of the branching condition is to
+      # speed up the sed processing (if there are no `@' at all, there
+      # is no need to browse any of the substitutions).
+      # These are the two extra sed commands mentioned above.
+      (echo ':t
+  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+      if test -z "$ac_sed_cmds"; then
+	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+      else
+	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+      fi
+      ac_sed_frag=`expr $ac_sed_frag + 1`
+      ac_beg=$ac_end
+      ac_end=`expr $ac_end + $ac_max_sed_lines`
+    fi
+  done
+  if test -z "$ac_sed_cmds"; then
+    ac_sed_cmds=cat
+  fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  esac
+
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    configure_input=
+  else
+    configure_input="$ac_file.  "
+  fi
+  configure_input=$configure_input"Generated from `echo $ac_file_in |
+				     sed 's,.*/,,'` by configure."
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+
+  if test x"$ac_file" != x-; then
+    { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    rm -f "$ac_file"
+  fi
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+  sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+  rm -f $tmp/stdin
+  if test x"$ac_file" != x-; then
+    mv $tmp/out $ac_file
+  else
+    cat $tmp/out
+    rm -f $tmp/out
+  fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
+ac_dB='[	 ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case $ac_file in
+  - | *:- | *:-:* ) # input from stdin
+	cat >$tmp/stdin
+	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+  * )   ac_file_in=$ac_file.in ;;
+  esac
+
+  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+  # First look for the input files in the build tree, otherwise in the
+  # src tree.
+  ac_file_inputs=`IFS=:
+    for f in $ac_file_in; do
+      case $f in
+      -) echo $tmp/stdin ;;
+      [\\/$]*)
+	 # Absolute (can't be DOS-style, as IFS=:)
+	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 # Do quote $f, to prevent DOS paths from being IFS'd.
+	 echo "$f";;
+      *) # Relative
+	 if test -f "$f"; then
+	   # Build tree
+	   echo "$f"
+	 elif test -f "$srcdir/$f"; then
+	   # Source tree
+	   echo "$srcdir/$f"
+	 else
+	   # /dev/null tree
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+   { (exit 1); exit 1; }; }
+	 fi;;
+      esac
+    done` || { (exit 1); exit 1; }
+  # Remove the trailing spaces.
+  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h.  The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status.  Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless.  Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo '  :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+  # Write a limited-size here document to $tmp/defines.sed.
+  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#define' lines.
+  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/defines.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+  rm -f conftest.defines
+  mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo '  fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+  # Write a limited-size here document to $tmp/undefs.sed.
+  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+  # Speed up: don't consider the non `#undef'
+  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
+  # Work around the forget-to-reset-the-flag bug.
+  echo 't clr' >>$CONFIG_STATUS
+  echo ': clr' >>$CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+  echo 'CEOF
+  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+  rm -f $tmp/in
+  mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+  rm -f conftest.undefs
+  mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+  # Let's still pretend it is `configure' which instantiates (i.e., don't
+  # use $as_me), people would be surprised to read:
+  #    /* config.h.  Generated by config.status.  */
+  if test x"$ac_file" = x-; then
+    echo "/* Generated by configure.  */" >$tmp/config.h
+  else
+    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
+  fi
+  cat $tmp/in >>$tmp/config.h
+  rm -f $tmp/in
+  if test x"$ac_file" != x-; then
+    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+      { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+      rm -f $ac_file
+      mv $tmp/config.h $ac_file
+    fi
+  else
+    cat $tmp/config.h
+    rm -f $tmp/config.h
+  fi
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $ac_file | $ac_file:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X$ac_file : 'X\(//\)[^/]' \| \
+	 X$ac_file : 'X\(//\)$' \| \
+	 X$ac_file : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_dest" : 'X\(//\)[^/]' \| \
+	 X"$ac_dest" : 'X\(//\)$' \| \
+	 X"$ac_dest" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  { if $as_mkdir_p; then
+    mkdir -p "$ac_dir"
+  else
+    as_dir="$ac_dir"
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+  ac_builddir=.
+
+if test "$ac_dir" != .; then
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A "../" for each directory in $ac_dir_suffix.
+  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+  ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+  .)  # No --srcdir option.  We are building in place.
+    ac_srcdir=.
+    if test -z "$ac_top_builddir"; then
+       ac_top_srcdir=.
+    else
+       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+    fi ;;
+  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir ;;
+  *) # Relative path.
+    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+  case "$ac_dir" in
+  .) ac_abs_builddir=`pwd`;;
+  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+  *) ac_abs_builddir=`pwd`/"$ac_dir";;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+  case ${ac_top_builddir}. in
+  .) ac_abs_top_builddir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+  case $ac_srcdir in
+  .) ac_abs_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+  esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+  case $ac_top_srcdir in
+  .) ac_abs_top_srcdir=$ac_abs_builddir;;
+  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+  esac;;
+esac
+
+
+  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+  case $ac_dest in
+    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  # Strip MF so we end up with the name of the file.
+  mf=`echo "$mf" | sed -e 's/:.*$//'`
+  # Check whether this is an Automake generated Makefile or not.
+  # We used to match only the files named `Makefile.in', but
+  # some people rename them; so instead we look at the file content.
+  # Grep'ing the first line is not enough: some people post-process
+  # each Makefile.in and add a new line on top of each file to say so.
+  # So let's grep whole file.
+  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+    dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+  else
+    continue
+  fi
+  # Extract the definition of DEPDIR, am__include, and am__quote
+  # from the Makefile without running `make'.
+  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+  test -z "$DEPDIR" && continue
+  am__include=`sed -n 's/^am__include = //p' < "$mf"`
+  test -z "am__include" && continue
+  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+  # When using ansi2knr, U may be empty or an underscore; expand it
+  U=`sed -n 's/^U = //p' < "$mf"`
+  # Find all dependency output files, they are included files with
+  # $(DEPDIR) in their names.  We invoke sed twice because it is the
+  # simplest approach to changing $(DEPDIR) to its actual value in the
+  # expansion.
+  for file in `sed -n "
+    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+    # Make sure the directory exists.
+    test -f "$dirpart/$file" && continue
+    fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    { if $as_mkdir_p; then
+    mkdir -p $dirpart/$fdir
+  else
+    as_dir=$dirpart/$fdir
+    as_dirs=
+    while test ! -d "$as_dir"; do
+      as_dirs="$as_dir $as_dirs"
+      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| \
+	 .     : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+  	  /^X\(\/\/\)$/{ s//\1/; q; }
+  	  /^X\(\/\).*/{ s//\1/; q; }
+  	  s/.*/./; q'`
+    done
+    test ! -n "$as_dirs" || mkdir $as_dirs
+  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+   { (exit 1); exit 1; }; }; }
+
+    # echo "creating $dirpart/$file"
+    echo '# dummy' > "$dirpart/$file"
+  done
+done
+ ;;
+  esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || { (exit 1); exit 1; }
+fi
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..683247a
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,120 @@
+## Process this file with autoconf to produce configure.
+## In general, the safest way to proceed is to run the following:
+##    % aclocal -I . -I `pwd`/../autoconf && autoheader && autoconf && automake
+
+# make sure we're interpreted by some minimal autoconf
+AC_PREREQ(2.57)
+
+AC_INIT(glog, 0.1, opensource@google.com)
+# The argument here is just something that should be in the current directory
+# (for sanity checking)
+AC_CONFIG_SRCDIR(README)
+AM_INIT_AUTOMAKE
+AM_CONFIG_HEADER(src/config.h)
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_CPP
+AC_PROG_CXX
+AM_CONDITIONAL(GCC, test "$GCC" = yes)   # let the Makefile know if we're gcc
+
+AC_PROG_LIBTOOL
+AC_SUBST(LIBTOOL_DEPS)
+
+# Check whether some low-level functions/files are available
+AC_HEADER_STDC
+
+# These are tested for by AC_HEADER_STDC, but I check again to set the var
+AC_CHECK_HEADER(stdint.h, ac_cv_have_stdint_h=1, ac_cv_have_stdint_h=0)
+AC_CHECK_HEADER(sys/types.h, ac_cv_have_systypes_h=1, ac_cv_have_systypes_h=0)
+AC_CHECK_HEADER(inttypes.h, ac_cv_have_inttypes_h=1, ac_cv_have_inttypes_h=0)
+AC_CHECK_HEADERS(syscall.h)
+AC_CHECK_HEADERS(sys/syscall.h)
+# For backtrace with glibc.
+# TODO(hamaji): Support other platforms using libgcc.
+AC_CHECK_HEADERS(execinfo.h)
+
+AC_CHECK_SIZEOF(void *)
+
+# These are the types I need.  We look for them in either stdint.h,
+# sys/types.h, or inttypes.h, all of which are part of the default-includes.
+AC_CHECK_TYPE(uint16_t, ac_cv_have_uint16_t=1, ac_cv_have_uint16_t=0)
+AC_CHECK_TYPE(u_int16_t, ac_cv_have_u_int16_t=1, ac_cv_have_u_int16_t=0)
+AC_CHECK_TYPE(__uint16, ac_cv_have___uint16=1, ac_cv_have___uint16=0)
+
+AC_CHECK_FUNC(sigaltstack,
+              AC_DEFINE(HAVE_SIGALTSTACK, 1,
+                        [Define if you have the `sigaltstack' function]))
+
+AX_C___ATTRIBUTE__
+# We only care about these two attributes.
+if test x"$ac_cv___attribute__" = x"yes"; then
+  ac_cv___attribute___noreturn="__attribute__ ((noreturn))"
+  ac_cv___attribute___printf_4_5="__attribute__((__format__ (__printf__, 4, 5)))"
+else
+  ac_cv___attribute___noreturn=
+  ac_cv___attribute___printf_4_5=
+fi
+
+AX_C___BUILTIN_EXPECT
+if test x"$ac_cv___builtin_expect" = x"yes"; then
+  ac_cv_have___builtin_expect=1
+else
+  ac_cv_have___builtin_expect=0
+fi
+
+# On x86_64, instead of libunwind, we can choose to compile with frame-pointers
+# (This isn't needed on i386, where -fno-omit-frame-pointer is the default).
+AC_ARG_ENABLE(frame_pointers,
+              AS_HELP_STRING([--enable-frame-pointers],
+                             [On x86_64 systems, compile with -fno-omit-frame-pointer (see INSTALL)]),
+              enable_frame_pointers=no)
+AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, [return __x86_64__ == 1 ? 0 : 1])],
+                  [is_x86_64=yes], [is_x86_64=no])
+AM_CONDITIONAL(ENABLE_FRAME_POINTERS, test "$enable_frame_pointers" = yes)
+AM_CONDITIONAL(X86_64, test "$is_x86_64" = yes)
+
+# Some of the code in this directory depends on pthreads
+ACX_PTHREAD
+
+# Check if there is google-gflags library installed.
+AC_CHECK_LIB(gflags, main, ac_cv_have_libgflags=1, ac_cv_have_libgflags=0)
+if test x"$ac_cv_have_libgflags" = x"1"; then
+  GFLAGS_LIBS=-lgflags
+  AC_DEFINE(HAVE_LIB_GFLAGS, 1, [define if you have google gflags library])
+else
+  GFLAGS_LIBS=
+fi
+
+# We'd like to use read/write locks in several places in the code.
+# See if our pthreads support extends to that.  Note: for linux, it
+# does as long as you define _XOPEN_SOURCE appropriately.
+AC_RWLOCK
+
+# Find out what namespace 'normal' STL code lives in, and also what namespace
+# the user wants our classes to be defined in
+AC_CXX_STL_NAMESPACE
+AC_DEFINE_GOOGLE_NAMESPACE(google)
+
+AC_CXX_USING_OPERATOR
+
+# These are what's needed by logging.h.in and raw_logging.h.in
+AC_SUBST(ac_google_start_namespace)
+AC_SUBST(ac_google_end_namespace)
+AC_SUBST(ac_google_namespace)
+AC_SUBST(ac_cv_cxx_using_operator)
+AC_SUBST(ac_cv___attribute___noreturn)
+AC_SUBST(ac_cv___attribute___printf_4_5)
+AC_SUBST(ac_cv_have___builtin_expect)
+AC_SUBST(ac_cv_have_stdint_h)
+AC_SUBST(ac_cv_have_systypes_h)
+AC_SUBST(ac_cv_have_inttypes_h)
+AC_SUBST(ac_cv_have_uint16_t)
+AC_SUBST(ac_cv_have_u_int16_t)
+AC_SUBST(ac_cv_have___uint16)
+AC_SUBST(ac_cv_have_libgflags)
+AC_SUBST(GFLAGS_LIBS)
+
+# Write generated configuration file
+AC_CONFIG_FILES([Makefile src/glog/logging.h src/glog/raw_logging.h src/glog/vlog_is_on.h src/glog/stl_logging.h])
+AC_OUTPUT
diff --git a/depcomp b/depcomp
new file mode 100755
index 0000000..04701da
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,530 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mecanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/doc/designstyle.css b/doc/designstyle.css
new file mode 100644
index 0000000..f5d1ec2
--- /dev/null
+++ b/doc/designstyle.css
@@ -0,0 +1,115 @@
+body {
+  background-color: #ffffff;
+  color: black;
+  margin-right: 1in;
+  margin-left: 1in;
+}
+
+
+h1, h2, h3, h4, h5, h6 {
+  color: #3366ff;
+  font-family: sans-serif;
+}
+@media print {
+  /* Darker version for printing */
+  h1, h2, h3, h4, h5, h6 {
+    color: #000080;
+    font-family: helvetica, sans-serif;
+  }
+}
+
+h1 { 
+  text-align: center;
+  font-size: 18pt;
+}
+h2 {
+  margin-left: -0.5in;
+}
+h3 {
+  margin-left: -0.25in;
+}
+h4 {
+  margin-left: -0.125in;
+}
+hr {
+  margin-left: -1in;
+}
+
+/* Definition lists: definition term bold */
+dt {
+  font-weight: bold;
+}
+
+address {
+  text-align: right;
+}
+/* Use the <code> tag for bits of code and <var> for variables and objects. */
+code,pre,samp,var {
+  color: #006000;
+}
+/* Use the <file> tag for file and directory paths and names. */
+file {
+  color: #905050;
+  font-family: monospace;
+}
+/* Use the <kbd> tag for stuff the user should type. */
+kbd {
+  color: #600000;
+}
+div.note p {
+  float: right;
+  width: 3in;
+  margin-right: 0%;
+  padding: 1px;
+  border: 2px solid #6060a0;
+  background-color: #fffff0;
+}
+
+UL.nobullets {
+  list-style-type: none;
+  list-style-image: none;
+  margin-left: -1em;
+}
+
+/*
+body:after {
+  content: "Google Confidential";
+}
+*/
+
+/* pretty printing styles.  See prettify.js */
+.str { color: #080; }
+.kwd { color: #008; }
+.com { color: #800; }
+.typ { color: #606; }
+.lit { color: #066; }
+.pun { color: #660; }
+.pln { color: #000; }
+.tag { color: #008; }
+.atn { color: #606; }
+.atv { color: #080; }
+pre.prettyprint { padding: 2px; border: 1px solid #888; }
+
+.embsrc { background: #eee; }
+
+@media print {
+  .str { color: #060; }
+  .kwd { color: #006; font-weight: bold; }
+  .com { color: #600; font-style: italic; }
+  .typ { color: #404; font-weight: bold; }
+  .lit { color: #044; }
+  .pun { color: #440; }
+  .pln { color: #000; }
+  .tag { color: #006; font-weight: bold; }
+  .atn { color: #404; }
+  .atv { color: #060; }
+}
+
+/* Table Column Headers */
+.hdr { 
+  color: #006; 
+  font-weight: bold; 
+  background-color: #dddddd; }
+.hdr2 { 
+  color: #006; 
+  background-color: #eeeeee; }
\ No newline at end of file
diff --git a/doc/glog.html b/doc/glog.html
new file mode 100644
index 0000000..b390832
--- /dev/null
+++ b/doc/glog.html
@@ -0,0 +1,506 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
+
+<html>
+<head>
+<title>How To Use Google Logging Library (glog)</title>
+
+<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+<link href="http://www.google.com/favicon.ico" type="image/x-icon"
+      rel="shortcut icon">
+<link href="designstyle.css" type="text/css" rel="stylesheet">
+<style type="text/css">
+<!--
+  ol.bluelist li {
+    color: #3366ff;
+    font-family: sans-serif;
+  }
+  ol.bluelist li p {
+    color: #000;
+    font-family: "Times Roman", times, serif;
+  }
+  ul.blacklist li {  
+    color: #000;
+    font-family: "Times Roman", times, serif;
+  }
+//-->
+</style>
+</head>
+
+<body>
+
+<h1>How To Use Google Logging Library (glog)</h1>
+<small>(as of
+<script type=text/javascript>
+  var lm = new Date(document.lastModified);
+  document.write(lm.toDateString());
+</script>)
+</small>
+<br>
+
+<h2> <A NAME=intro>Introduction</A> </h2>
+
+<p><b>Google glog</b> is a library that implements application-level
+logging.  This library provides logging APIs based on C++-style
+streams and various helper macros.
+You can log a message by simply streaming things to LOG(&lt;a
+particular <a href="#severity">severity level</a>&gt;), e.g.
+
+<pre>
+   #include &lt;google/logging.h&gt;
+
+   int main(int argc, char* argv[]) {
+     // Initialize Google's logging library.
+     google::InitGoogleLogging(argv[0]);
+
+     // ...
+     LOG(INFO) &lt;&lt; "Found " &lt;&lt; num_cookies &lt;&lt; " cookies";
+   }
+</pre>
+
+<p>Google glog defines a series of macros that simplify many common logging
+tasks.  You can log messages by severity level, control logging
+behavior from the command line, log based on conditionals, abort the
+program when expected conditions are not met, introduce your own
+verbose logging levels, and more.  This document describes the
+functionality supported by glog.  Please note that this document
+doesn't describe all features in this library, but the most useful
+ones.  If you want to find less common features, please check
+header files under <code>src/google</code> directory.
+
+<h2> <A NAME=severity>Severity Level</A> </h2>
+
+<p>
+You can specify one of the following severity levels (in
+increasing order of severity): <code>INFO</code>, <code>WARNING</code>,
+<code>ERROR</code>, and <code>FATAL</code>.
+Logging a <code>FATAL</code> message terminates the program (after the
+message is logged).
+Note that messages of a given severity are logged not only in the
+logfile for that severity, but also in all logfiles of lower severity.
+E.g., a message of severity <code>FATAL</code> will be logged to the
+logfiles of severity <code>FATAL</code>, <code>ERROR</code>,
+<code>WARNING</code>, and <code>INFO</code>.
+
+<p>
+The <code>DFATAL</code> severity logs a <code>FATAL</code> error in
+debug mode (i.e., there is no <code>NDEBUG</code> macro defined), but
+avoids halting the program in production by automatically reducing the
+severity to <code>ERROR</code>.
+
+<p>Unless otherwise specified, glog writes to the filename
+"/tmp/&lt;program name&gt;.&lt;hostname&gt;.&lt;user name&gt;.log.&lt;severity level&gt;.&lt;date&gt;.&lt;time&gt;.&lt;pid&gt;"
+(e.g., "/tmp/hello_world.example.com.hamaji.log.INFO.20080709-222411.10474").
+By default, glog copies the log messages of severity level
+<code>ERROR</code> or <code>FATAL</code> to standard error (stderr)
+in addition to log files.
+
+<h2><A NAME=flags>Setting Flags</A></h2>
+
+<p>Several flags influences glog's output behavior.
+If the <a href="http://code.google.com/p/google-gflags/">Google
+gflags library</a> is installed on your machine, the
+<code>configure</code> script (see the INSTALL file in the package for
+detail of this script) will automatically detect and use it,
+allowing you to pass flags on the command line.  For example, if you
+want to turn the flag <code>--logtostderr</code> on, you can start
+your application with the following command line:
+
+<pre>
+   ./your_application --logtostderr=1
+</pre>
+
+If the Google gflags library isn't installed, you set flags via
+environment variables, prefixing the flag name with "GLOG_", e.g.
+
+<pre>
+   GLOG_logtostderr=1 ./your_application
+</pre>
+
+<p>The following flags are most commonly used:
+
+<dl>
+<dt><code>logtostderr</code> (<code>bool</code>, default=<code>false</code>)
+<dd>Log messages to stderr instead of logfiles.<br>
+Note: you can set binary flags to <code>true</code> by specifying
+<code>1</code>, <code>true</code> , or <code>yes</code> (case
+insensitive).
+Also, you can set binary flags to <code>false</code> by specifying
+<code>0</code>, <code>false</code>, or <code>no</code> (again, case
+insensitive).
+<dt><code>stderrthreshold</code> (<code>int</code>, default=2, which
+is <code>ERROR</code>)
+<dd>Copy log messages at or above this level to stderr in
+addition to logfiles.  The numbers of severity levels
+<code>INFO</code>, <code>WARNING</code>, <code>ERROR</code>, and 
+<code>FATAL</code> are 0, 1, 2, and 3, respectively.
+<dt><code>minloglevel</code> (<code>int</code>, default=0, which
+is <code>INFO</code>)
+<dd>Log messages at or above this level.  Again, the numbers of
+severity levels <code>INFO</code>, <code>WARNING</code>,
+<code>ERROR</code>, and <code>FATAL</code> are 0, 1, 2, and 3,
+respectively.
+<dt><code>log_dir</code> (<code>string</code>, default="")
+<dd>If specified, logfiles are written into this directory instead
+of the default logging directory.
+<dt><code>v</code> (<code>int</code>, default=0)
+<dd>Show all <code>VLOG(m)</code> messages for <code>m</code> less or
+equal the value of this flag.  Overridable by --vmodule.
+See <a href="#verbose">the section about verbose logging</a> for more
+detail.
+<dt><code>vmodule</code> (<code>string</code>, default="")
+<dd>Per-module verbose level.  The argument has to contain a
+comma-separated list of &lt;module name&gt;=&lt;log level&gt;.
+&lt;module name&gt;
+is a glob pattern (e.g., <code>gfs*</code> for all modules whose name
+starts with "gfs"), matched against the filename base
+(that is, name ignoring .cc/.h./-inl.h).
+&lt;log level&gt; overrides any value given by --v.
+See also <a href="#verbose">the section about verbose logging</a>.
+</dl>
+
+<p>There are some other flags defined in logging.cc.  Please grep the
+source code for "DEFINE_" to see a complete list of all flags.
+
+<h2><A NAME=conditional>Conditional / Occasional Logging</A></h2>
+
+<p>Sometimes, you may only want to log a message under certain
+conditions. You can use the following macros to perform conditional
+logging:
+
+<pre>
+   LOG_IF(INFO, num_cookies > 10) &lt;&lt; "Got lots of cookies";
+</pre>
+
+The "Got lots of cookies" message is logged only when the variable
+<code>num_cookies</code> exceeds 10.
+
+If a line of code is executed many times, it may be useful to only log
+a message at certain intervals.  This kind of logging is most useful
+for informational messages. 
+
+<pre>
+   LOG_EVERY_N(INFO, 10) &lt;&lt; "Got the " &lt;&lt; COUNTER &lt;&lt; "th cookie";
+</pre>
+
+<p>The above line outputs a log messages on the 1st, 11th,
+21st, ... times it is executed.  Note that the special
+<code>COUNTER</code> value is used to identify which repetition is
+happening.
+
+<p>You can combine conditional and occasional logging with the
+following macro.
+
+<pre>
+   LOG_IF_EVERY_N(INFO, (size > 1024), 10) &lt;&lt; "Got the " &lt;&lt; COUNTER
+                                           &lt;&lt; "th big cookie";
+</pre>
+
+<p>Instead of outputting a message every nth time, you can also limit
+the output to the first n occurrences:
+
+<pre>
+   LOG_FIRST_N(INFO, 20) &lt;&lt; "Got the " &lt;&lt; COUNTER &lt;&lt; "th cookie";
+</pre>
+
+<p>Outputs log messages for the first 20 times it is executed.  Again,
+the <code>COUNTER</code> identifier indicates which repetition is
+happening.
+
+<h2><A NAME=debug>Debug Mode Support</A></h2>
+
+<p>Special "debug mode" logging macros only have an effect in debug
+mode and are compiled away to nothing for non-debug mode
+compiles.  Use these macros to avoid slowing down your production
+application due to excessive logging.
+
+<pre>
+   DLOG(INFO) &lt;&lt; "Found cookies";
+
+   DLOG_IF(INFO, num_cookies > 10) &lt;&lt; "Got lots of cookies";
+
+   DLOG_EVERY_N(INFO, 10) &lt;&lt; "Got the " &lt;&lt; COUNTER &lt;&lt; "th cookie";
+</pre>
+
+<p>All "debug mode" logging is compiled away to nothing for non-debug mode
+compiles.
+
+<h2><A NAME=check>CHECK Macros</A></h2>
+
+<p>It is a good practice to check expected conditions in your program
+frequently to detect errors as early as possible. The
+<code>CHECK</code> macro provides the ability to abort the application
+when a condition is not met, similar to the <code>assert</code> macro
+defined in the standard C library.
+
+<p><code>CHECK</code> aborts the application if a condition is not
+true.  Unlike <code>assert</code>, it is *not* controlled by
+<code>NDEBUG</code>, so the check will be executed regardless of
+compilation mode.  Therefore, <code>fp->Write(x)</code> in the
+following example is always executed:
+
+<pre>
+   CHECK(fp->Write(x) == 4) &lt;&lt; "Write failed!";
+</pre>
+
+<p>There are various helper macros for
+equality/inequality checks - <code>CHECK_EQ</code>,
+<code>CHECK_NE</code>, <code>CHECK_LE</code>, <code>CHECK_LT</code>,
+<code>CHECK_GE</code>, and <code>CHECK_GT</code>.
+They compare two values, and log a
+<code>FATAL</code> message including the two values when the result is
+not as expected.  The values must have <code>operator&lt;&lt;(ostream,
+...)</code> defined.
+
+<p>You may append to the error message like so:
+
+<pre>
+   CHECK_NE(1, 2) &lt;&lt; ": The world must be ending!";
+</pre>
+
+<p>We are very careful to ensure that each argument is evaluated exactly
+once, and that anything which is legal to pass as a function argument is
+legal here.  In particular, the arguments may be temporary expressions
+which will end up being destroyed at the end of the apparent statement,
+for example:
+
+<pre>
+   CHECK_EQ(string("abc")[1], 'b');
+</pre>
+
+<p>The compiler reports an error if one of the arguments is a
+pointer and the other is NULL. To work around this, simply static_cast
+NULL to the type of the desired pointer.
+
+<pre>
+   CHECK_EQ(some_ptr, static_cast<SomeType*>(NULL));
+</pre>
+
+<p>Better yet, use the CHECK_NOTNULL macro:
+
+<pre>
+   CHECK_NOTNULL(some_ptr);
+   some_ptr->DoSomething();
+</pre>
+
+<p>Since this macro returns the given pointer, this is very useful in
+constructor initializer lists.
+
+<pre>
+   struct S {
+     S(Something* ptr) : ptr_(CHECK_NOTNULL(ptr)) {}
+     Something* ptr_;
+   };
+</pre>
+
+<p>Note that you cannot use this macro as a C++ stream due to this
+feature.  Please use <code>CHECK_EQ</code> described above to log a
+custom message before aborting the application.
+
+<p>If you are comparing C strings (char *), a handy set of macros
+performs case sensitive as well as case insensitive comparisons -
+<code>CHECK_STREQ</code>, <code>CHECK_STRNE</code>,
+<code>CHECK_STRCASEEQ</code>, and <code>CHECK_STRCASENE</code>.  The
+CASE versions are case-insensitive.  You can safely pass <code>NULL</code>
+pointers for this macro.  They treat <code>NULL</code> and any
+non-<code>NULL</code> string as not equal.  Two <code>NULL</code>s are
+equal.
+
+<p>Note that both arguments may be temporary strings which are
+destructed at the end of the current "full expression"
+(e.g., <code>CHECK_STREQ(Foo().c_str(), Bar().c_str())</code> where
+<code>Foo</code> and <code>Bar</code> returns C++'s
+<code>std::string</code>).
+
+<p>The <code>CHECK_DOUBLE_EQ</code> macro checks the equality of two
+floating point values, accepting a small error margin.
+<code>CHECK_NEAR</code> accepts a third floating point argument, which
+specifies the acceptable error margin.
+
+<h2><A NAME=verbose>Verbose Logging</A></h2>
+
+<p>When you are chasing difficult bugs, thorough log messages are very
+useful.  However, you may want to ignore too verbose messages in usual
+development.  For such verbose logging, glog provides the
+<code>VLOG</code> macro, which allows you to define your own numeric
+logging levels.  The <code>--v</code> command line option controls
+which verbose messages are logged: 
+
+<pre>
+   VLOG(1) &lt;&lt; "I'm printed when you run the program with --v=1 or higher";
+   VLOG(2) &lt;&lt; "I'm printed when you run the program with --v=2 or higher";
+</pre>
+
+<p>With <code>VLOG</code>, the lower the verbose level, the more
+likely messages are to be logged.  For example, if
+<code>--v==1</code>, <code>VLOG(1)</code> will log, but
+<code>VLOG(2)</code> will not log.  This is opposite of the severity
+level, where <code>INFO</code> is 0, and <code>ERROR</code> is 2.
+<code>--minloglevel</code> of 1 will log <code>WARNING</code> and
+above.  Though you can specify any integers for both <code>VLOG</code>
+macro and <code>--v</code> flag, the common values for them are small
+positive integers.  For example, if you write <code>VLOG(0)</code>,
+you should specify <code>--v=-1</code> or lower to silence it.  This
+is less useful since we may not want verbose logs by default in most
+cases.  The <code>VLOG</code> macros always log at the
+<code>INFO</code> log level (when they log at all).
+
+<p>Verbose logging can be controlled from the command line on a
+per-module basis:
+
+<pre>
+   --vmodule=mapreduce=2,file=1,gfs*=3 --v=0
+</pre>
+
+<p>will:
+
+<ul>
+  <li>a. Print VLOG(2) and lower messages from mapreduce.{h,cc}
+  <li>b. Print VLOG(1) and lower messages from file.{h,cc}
+  <li>c. Print VLOG(3) and lower messages from files prefixed with "gfs"
+  <li>d. Print VLOG(0) and lower messages from elsewhere
+</ul>
+
+<p>The wildcarding functionality shown by (c) supports both '*'
+(matches 0 or more characters) and '?' (matches any single character)
+wildcards.  Please also check the section about <a
+href="#flags">command line flags</a>.
+
+<p>There's also <code>VLOG_IS_ON(n)</code> "verbose level" condition
+macro.  This macro returns true when the <code>--v</code> is equal or
+greater than <code>n</code>.  To be used as
+
+<pre>
+   if (VLOG_IS_ON(2)) {
+     // do some logging preparation and logging
+     // that can't be accomplished with just VLOG(2) &lt;&lt; ...;
+   }
+</pre>
+
+<p>Verbose level condition macros <code>VLOG_IF</code>,
+<code>VLOG_EVERY_N</code> and <code>VLOG_IF_EVERY_N</code> behave
+analogous to <code>LOG_IF</code>, <code>LOG_EVERY_N</code>,
+<code>LOF_IF_EVERY</code>, but accept a numeric verbosity level as
+opposed to a severity level.
+
+<pre>
+   VLOG_IF(1, (size > 1024))
+      &lt;&lt; "I'm printed when size is more than 1024 and when you run the "
+         "program with --v=1 or more";
+   VLOG_EVERY_N(1, 10)
+      &lt;&lt; "I'm printed every 10th occurrence, and when you run the program "
+         "with --v=1 or more. Present occurence is " &lt;&lt; COUNTER;
+   VLOG_IF_EVERY_N(1, (size > 1024), 10)
+      &lt;&lt; "I'm printed on every 10th occurence of case when size is more "
+         " than 1024, when you run the program with --v=1 or more. ";
+         "Present occurence is " &lt;&lt; COUNTER;
+</pre>
+
+<h2> <A name="misc">Miscellaneous Notes</A> </h2>
+
+<h3><A NAME=message>Performance of Messages</A></h3>
+
+<p>The conditional logging macros provided by glog (e.g.,
+<code>CHECK</code>, <code>LOG_IF</code>, <code>VLOG</code>, ...) are
+carefully implemented and don't execute the right hand side
+expressions when the conditions are false.  So, the following check
+may not sacrifice the performance of your application.
+
+<pre>
+   CHECK(obj.ok) << obj.CreatePrettyFormattedStringButVerySlow();
+</pre>
+
+<h3><A NAME=failure>User-defined Failure Function</A></h3>
+
+<p><code>FATAL</code> severity level messages or unsatisfied
+<code>CHECK</code> condition terminate your program.  You can change
+the behavior of the termination by
+<code>InstallFailureFunction</code>.
+
+<pre>
+   void YourFailureFunction() {
+     // Reports something...
+     exit(1);
+   }
+
+   int main(int argc, char* argv[]) {
+     google::InstallFailureFunction(&amp;YourFailureFunction);
+   }
+</pre>
+
+<p>By default, glog tries to dump stacktrace and makes the program
+exit with status 1.  The stacktrace is produced only when you run the
+program on an architecture for which glog supports stack tracing (as
+of September 2008, glog supports stack tracing for x86 and x86_64).
+
+<h3><A NAME=raw>Raw Logging</A></h3>
+
+<p>The header file <code>&lt;google/raw_logging.h&gt;</code> can be
+used for thread-safe logging, which does not allocate any memory or
+acquire any locks.  Therefore, the macros defined in this
+header file can be used by low-level memory allocation and
+synchronization code.
+Please check <code>src/google/raw_logging.h.in</code> for detail.
+</p>
+
+<h3><A NAME=plog>Google Style perror()</A></h3>
+
+<p><code>PLOG()</code> and <code>PLOG_IF()</code> and
+<code>PCHECK()</code> behave exactly like their <code>LOG*</code> and
+<code>CHECK</code> equivalents with the addition that they append a
+description of the current state of errno to their output lines.
+E.g.
+
+<pre>
+   PCHECK(write(1, NULL, 2) >= 0) << "Write NULL failed";
+</pre>
+
+<p>This check fails with the following error message.
+
+<pre>
+   F0825 185142 test.cc:22] Check failed: write(1, NULL, 2) >= 0 Write NULL failed: Bad address [14]
+</pre>
+
+<h3><A NAME=syslog>Syslog</A></h3>
+
+<p><code>SYSLOG</code>, <code>SYSLOG_IF</code>, and
+<code>SYSLOG_EVERY_N</code> macros are available.
+These log to syslog in addition to the normal logs.  Be aware that
+logging to syslog can drastically impact performance, especially if
+syslog is configured for remote logging!  Make sure you understand the
+implications of outputting to syslog before you use these macros. In
+general, it's wise to use these macros sparingly.
+
+<h3><A NAME=strip>Strip Logging Messages</A></h3>
+
+<p>Strings used in log messages can increase the size of your binary
+and present a privacy concern.  You can therefore instruct glog to
+remove all strings which fall below a certain severity level by using
+the GOOGLE_STRIP_LOG macro:
+
+<p>If your application has code like this:
+
+<pre>
+   #define GOOGLE_STRIP_LOG 1    // this must go before the #include!
+   #include &lt;google/logging.h&gt;
+</pre>
+
+<p>The compiler will remove the log messages whose severity are less
+than the specified integer value.  Since
+<code>VLOG</code> logs at the severity level <code>INFO</code>
+(numeric value <code>0</code>),
+setting <code>GOOGLE_STRIP_LOG</code> to 1 or greater removes
+all log messages associated with <code>VLOG</code>s as well as
+<code>INFO</code> log statements.
+
+<hr>
+<address>
+Shinichiro Hamaji<br>
+Gregor Hohpe<br>
+<script type=text/javascript>
+  var lm = new Date(document.lastModified);
+  document.write(lm.toDateString());
+</script>
+</address>
+
+</body>
+</html>
diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..4d4a951
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/ltmain.sh b/ltmain.sh
new file mode 100644
index 0000000..8fc56db
--- /dev/null
+++ b/ltmain.sh
@@ -0,0 +1,6871 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION="1.5.22 Debian 1.5.22-2"
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+  setopt NO_GLOB_SUBST
+fi
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  $echo "$modename: not configured to build any kind of library" 1>&2
+  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit $EXIT_FAILURE
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+duplicate_deps=no
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+	# Failing that, at least try and use $RANDOM to avoid a race
+	my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+	save_mktempdir_umask=`umask`
+	umask 0077
+	$mkdir "$my_tmpdir"
+	umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+	exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 | \
+	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	case $arg in
+	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	    # Double-quote args containing other shell metacharacters.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    CC_quoted="$CC_quoted $arg"
+	  done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xdir="$my_gentop/$my_xlib"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $exit_status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    ${rm}r unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	fi # $run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+disable_libs=no
+
+# Parse our command line options once, thoroughly.
+while test "$#" -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    tag)
+      tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+	$echo "$progname: invalid tag name: $tagname" 1>&2
+	exit $EXIT_FAILURE
+	;;
+      esac
+
+      case $tagname in
+      CC)
+	# Don't test for the "default" C tag, as we know, it's there, but
+	# not specially marked.
+	;;
+      *)
+	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+	  taglist="$taglist $tagname"
+	  # Evaluate the configuration.
+	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+	else
+	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
+	fi
+	;;
+      esac
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    $echo
+    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
+    $echo "This is free software; see the source for copying conditions.  There is NO"
+    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
+    ;;
+
+  --config)
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+    done
+    exit $?
+    ;;
+
+  --debug)
+    $echo "$progname: enabling shell trace mode"
+    set -x
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    $echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      $echo "enable shared libraries"
+    else
+      $echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      $echo "enable static libraries"
+    else
+      $echo "disable static libraries"
+    fi
+    exit $?
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
+  --quiet | --silent)
+    show=:
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+fi
+
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+    case $nonopt in
+    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+      mode=link
+      for arg
+      do
+	case $arg in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  if test -n "$libobj" ; then
+	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+ 	  for arg in $args; do
+	    IFS="$save_ifs"
+
+	    # Double-quote args containing other shell metacharacters.
+	    # Many Bourne shells cannot handle close brackets correctly
+	    # in scan sets, so we specify it separately.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    lastarg="$lastarg $arg"
+	  done
+	  IFS="$save_ifs"
+	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+	  # Add the arguments to base_compile.
+	  base_compile="$base_compile $lastarg"
+	  continue
+	  ;;
+
+	* )
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      case $lastarg in
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      base_compile="$base_compile $lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      $echo "$modename: you must specify an argument for -Xcompile"
+      exit $EXIT_FAILURE
+      ;;
+    target)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *)
+      # Get the name of the library object.
+      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSifmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.ii) xform=ii ;;
+    *.class) xform=class ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    *.java) xform=java ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+      $echo "$srcfile" > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
+
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      if test ! -d "${xdir}$objdir"; then
+	$show "$mkdir ${xdir}$objdir"
+	$run $mkdir ${xdir}$objdir
+	exit_status=$?
+	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $exit_status
+	fi
+      fi
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	command="$command -o $lobj"
+      fi
+
+      $run $rm "$lobj" "$output_obj"
+
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	$show "$mv $output_obj $lobj"
+	if $run $mv $output_obj $lobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
+      fi
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$obj" "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+    fi
+
+    $run $mv "${libobj}T" "${libobj}"
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    base_compile="$nonopt $@"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+	;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat $save_arg`
+	    do
+#	      moreargs="$moreargs $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		# If there is no directory component, then add one.
+		case $arg in
+		*/* | *\\*) . $arg ;;
+		*) . ./$arg ;;
+		esac
+
+		if test -z "$pic_object" || \
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none && \
+		   test "$non_pic_object" = none; then
+		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+
+		# Extract subdirectory from the argument.
+		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		if test "X$xdir" = "X$arg"; then
+		  xdir=
+		else
+		  xdir="$xdir/"
+		fi
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      dlfiles="$dlfiles $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    dlprefiles="$dlprefiles $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  libobjs="$libobjs $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if test -z "$run"; then
+		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+		  exit $EXIT_FAILURE
+		else
+		  # Dry-run case.
+
+		  # Extract subdirectory from the argument.
+		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		  if test "X$xdir" = "X$arg"; then
+		    xdir=
+		  else
+		    xdir="$xdir/"
+		  fi
+
+		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+		  libobjs="$libobjs $pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      fi
+	    done
+	  else
+	    $echo "$modename: link input file \`$save_arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  compile_command="$compile_command $wl$qarg"
+	  finalize_command="$finalize_command $wl$qarg"
+	  continue
+	  ;;
+	xcclinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	shrext)
+  	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	darwin_framework|darwin_framework_skip)
+	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  prev=
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+	  exit $EXIT_FAILURE
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework|-arch|-isysroot)
+	case " $CC " in
+	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+		prev=darwin_framework_skip ;;
+	  *) compiler_flags="$compiler_flags $arg"
+	     prev=darwin_framework ;;
+	esac
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    absdir="$dir"
+	    notinst_path="$notinst_path $dir"
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    deplibs="$deplibs -framework System"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	deplibs="$deplibs $arg"
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -pg pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+      -t[45]*|-txscale*|@*)
+
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+        compile_command="$compile_command $arg"
+        finalize_command="$finalize_command $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # in order for the loader to find any dlls it needs.
+	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Wl,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $wl$flag"
+	  linker_flags="$linker_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.$objext)
+	# A standard object.
+	objs="$objs $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  # If there is no directory component, then add one.
+	  case $arg in
+	  */* | *\\*) . $arg ;;
+	  *) . ./$arg ;;
+	  esac
+
+	  if test -z "$pic_object" || \
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none && \
+	     test "$non_pic_object" = none; then
+	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$arg"; then
+	    xdir=
+ 	  else
+	    xdir="$xdir/"
+	  fi
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		dlfiles="$dlfiles $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      dlprefiles="$dlprefiles $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    libobjs="$libobjs $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if test -z "$run"; then
+	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+	    exit $EXIT_FAILURE
+	  else
+	    # Dry-run case.
+
+	    # Extract subdirectory from the argument.
+	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$arg"; then
+	      xdir=
+	    else
+	      xdir="$xdir/"
+	    fi
+
+	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	    libobjs="$libobjs $pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d "$output_objdir"; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+	exit $exit_status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    case $host in
+    *cygwin* | *mingw* | *pw32*)
+      # don't eliminate duplications in $postdeps and $predeps
+      duplicate_compiler_generated_deps=yes
+      ;;
+    *)
+      duplicate_compiler_generated_deps=$duplicate_deps
+      ;;
+    esac
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if test "X$duplicate_deps" = "Xyes" ; then
+	case "$libs " in
+	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	esac
+      fi
+      libs="$libs $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  esac
+	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    case $linkmode in
+    lib)
+	passes="conv link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+    for pass in $passes; do
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
+	esac
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    compiler_flags="$compiler_flags $deplib"
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    continue
+	  fi
+	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if (${SED} -e '2q' $lib |
+                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		  library_names=
+		  old_library=
+		  case $lib in
+		  */* | *\\*) . $lib ;;
+		  *) . ./$lib ;;
+		  esac
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+		    test "X$ladir" = "X$lib" && ladir="."
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+	        ;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  *)
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
+	      $echo
+	      $echo "*** Warning: Trying to link with static lib archive $deplib."
+	      $echo "*** I have the capability to make that library automatically link in when"
+	      $echo "*** you link to this library.  But I can only do this if you have a"
+	      $echo "*** shared version of the library, which you do not appear to have"
+	      $echo "*** because the file extensions .$libext of this argument makes me believe"
+	      $echo "*** that it is just a static archive that I should not used here."
+	    else
+	      $echo
+	      $echo "*** Warning: Linking the shared library $output against the"
+	      $echo "*** static library $deplib is not portable!"
+	      deplibs="$deplib $deplibs"
+	    fi
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      newdlprefiles="$newdlprefiles $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      newdlfiles="$newdlfiles $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$ladir" = "X$lib" && ladir="."
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	case $lib in
+	*/* | *\\*) . $lib ;;
+	*) . ./$lib ;;
+	esac
+
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      exit $EXIT_FAILURE
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+              if test "X$duplicate_deps" = "Xyes" ; then
+	        case "$tmp_libs " in
+	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	        esac
+              fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
+	fi # $installed = yes
+	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath " in
+	      *" $dir "*) ;;
+	      *" $absdir "*) ;;
+	      *) temp_rpath="$temp_rpath $absdir" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  if test "$installed" = no; then
+	    notinst_deplibs="$notinst_deplibs $lib"
+	    need_relink=yes
+	  fi
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on
+	  # some systems (darwin)
+	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+	    $echo
+	    if test "$linkmode" = prog; then
+	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $echo "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    realname="$2"
+	    shift; shift
+	    libname=`eval \\$echo \"$libname_spec\"`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw*)
+		major=`expr $current - $age`
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      $show "extracting exported symbol list from \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$extract_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      $show "generating import library for \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$old_archive_from_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a module then we can not link against
+		    # it, someone is ignoring the new warnings I added
+		    if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
+		      $echo "** Warning, lib $linklib is a module, not a shared library"
+		      if test -z "$old_library" ; then
+		        $echo
+		        $echo "** And there doesn't seem to be a static archive available"
+		        $echo "** The link will probably fail, sorry"
+		      else
+		        add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      exit $EXIT_FAILURE
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes && \
+		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+	        add="$inst_prefix_dir$libdir/$linklib"
+	      else
+	        add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    $echo
+	    $echo "*** Warning: This system can not link to static lib archive $lib."
+	    $echo "*** I have the capability to make that library automatically link in when"
+	    $echo "*** you link to this library.  But I can only do this if you have a"
+	    $echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      $echo "*** But as you try to build a module library, libtool will still create "
+	      $echo "*** a static module, that should work as long as the dlopening application"
+	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		$echo
+		$echo "*** However, this would only work if libtool was able to extract symbol"
+		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$echo "*** not find such a program.  So, this module is probably useless."
+		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+		test "X$dir" = "X$deplib" && dir="."
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if grep "^installed=no" $deplib > /dev/null; then
+		  path="$absdir/$objdir"
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -z "$libdir"; then
+		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		    exit $EXIT_FAILURE
+		  fi
+		  if test "$absdir" != "$libdir"; then
+		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+		  fi
+		  path="$absdir"
+		fi
+		depdepl=
+		case $host in
+		*-*-darwin*)
+		  # we do not want to link against static libs,
+		  # but need to link against shared
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$path/$depdepl" ; then
+		      depdepl="$path/$depdepl"
+		    fi
+		    # do not add paths which are already there
+		    case " $newlib_search_path " in
+		    *" $path "*) ;;
+		    *) newlib_search_path="$newlib_search_path $path";;
+		    esac
+		  fi
+		  path=""
+		  ;;
+		*)
+		  path="-L$path"
+		  ;;
+		esac
+		;;
+	      -l*)
+		case $host in
+		*-*-darwin*)
+		  # Again, we only want to link against shared libraries
+		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+		  for tmp in $newlib_search_path ; do
+		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
+		      eval depdepl="$tmp/lib$tmp_libs.dylib"
+		      break
+		    fi
+		  done
+		  path=""
+		  ;;
+		*) continue ;;
+		esac
+		;;
+	      *) continue ;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	      case " $deplibs " in
+	      *" $depdepl "*) ;;
+	      *) deplibs="$depdepl $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  tmp_libs="$tmp_libs $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  exit $EXIT_FAILURE
+	else
+	  $echo
+	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  $echo "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
+      fi
+
+      if test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test "$#" -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$2"
+	  number_minor="$3"
+	  number_revision="$4"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  darwin|linux|osf|windows)
+	    current=`expr $number_major + $number_minor`
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    current=`expr $number_major + $number_minor - 1`
+	    age="$number_minor"
+	    revision="$number_minor"
+	    ;;
+	  *)
+	    $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	    $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$2"
+	  revision="$3"
+	  age="$4"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	irix | nonstopux)
+	  major=`expr $current - $age + 1`
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=.`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  major=`expr $current - $age`
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+      fi
+
+      if test "$mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$echo "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+	         then
+		   continue
+		 fi
+	       fi
+	       removelist="$removelist $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	if test -n "$removelist"; then
+	  $show "${rm}r $removelist"
+	  $run ${rm}r $removelist
+	fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      for path in $notinst_path; do
+	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+ 	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+	  if test "$?" -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name=`expr $i : '-l\(.*\)'`
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" -ne "0"; then
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    newdeplibs="$newdeplibs $i"
+		    i=""
+		    ;;
+		  esac
+	        fi
+		if test -n "$i" ; then
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    $echo
+		    $echo "*** Warning: dynamic linker does not accept needed library $i."
+		    $echo "*** I have the capability to make that library automatically link in when"
+		    $echo "*** you link to this library.  But I can only do this if you have a"
+		    $echo "*** shared version of the library, which I believe you do not have"
+		    $echo "*** because a test_compile did reveal that the linker did not use it for"
+		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      name=`expr $i : '-l\(.*\)'`
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
+		$rm conftest
+		$LTCC $LTCFLAGS -o conftest conftest.c $i
+		# Did it work?
+		if test "$?" -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      newdeplibs="$newdeplibs $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval \\$echo \"$libname_spec\"`
+		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		    set dummy $deplib_matches
+		    deplib_match=$2
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      newdeplibs="$newdeplibs $i"
+		    else
+		      droppeddeps=yes
+		      $echo
+		      $echo "*** Warning: dynamic linker does not accept needed library $i."
+		      $echo "*** I have the capability to make that library automatically link in when"
+		      $echo "*** you link to this library.  But I can only do this if you have a"
+		      $echo "*** shared version of the library, which you do not appear to have"
+		      $echo "*** because a test_compile did reveal that the linker did not use this one"
+		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  $echo
+		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $echo "***  make it link in!  You will probably need to install it or some"
+		  $echo "*** library that it depends on before this library will be fully"
+		  $echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name=`expr $a_deplib : '-l\(.*\)'`
+	    # If $name is empty we are operating on a -L argument.
+            if test "$name" != "" && test  "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | ${SED} 10q \
+			 | $EGREP "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name=`expr $a_deplib : '-l\(.*\)'`
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval $echo \"$potent_lib\" 2>/dev/null \
+		        | ${SED} 10q \
+		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		      newdeplibs="$newdeplibs $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	    -e 's/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	    done
+	  fi
+	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
+	    | grep . >/dev/null; then
+	    $echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    $echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library is the System framework
+	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    $echo
+	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $echo "*** a static module, that should work as long as the dlopening"
+	    $echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      $echo
+	      $echo "*** However, this would only work if libtool was able to extract symbol"
+	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $echo "*** not find such a program.  So, this module is probably useless."
+	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    $echo "*** The inter-library dependencies that have been dropped here will be"
+	    $echo "*** automatically added whenever a program is linked with this library"
+	    $echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      $echo
+	      $echo "*** Since this library must not contain undefined symbols,"
+	      $echo "*** because either the platform does not support them or"
+	      $echo "*** it was explicitly requested with -no-undefined,"
+	      $echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+	    else
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	    fi
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      eval cmd=\"$cmd\"
+	      if len=`expr "X$cmd" : ".*"` &&
+	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	        $show "$cmd"
+	        $run eval "$cmd" || exit $?
+	        skipped_export=false
+	      else
+	        # The command line is too long to execute in one step.
+	        $show "using reloadable object file for export list..."
+	        skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+		case " $convenience " in
+		*" $test_deplib "*) ;;
+		*)
+			tmp_deplibs="$tmp_deplibs $test_deplib"
+			;;
+		esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
+	  fi
+	fi
+	
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linker_flags="$linker_flags $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval test_cmds=\"$archive_expsym_cmds\"
+	  cmds=$archive_expsym_cmds
+	else
+	  eval test_cmds=\"$archive_cmds\"
+	  cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise.
+	  $echo "creating reloadable object files..."
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  delfiles=
+	  last_robj=
+	  k=1
+	  output=$output_objdir/$output_la-${k}.$objext
+	  # Loop over the list of objects to be linked.
+	  for obj in $save_libobjs
+	  do
+	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+	    if test "X$objlist" = X ||
+	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+		 test "$len" -le "$max_cmd_len"; }; then
+	      objlist="$objlist $obj"
+	    else
+	      # The command $test_cmds is almost too long, add a
+	      # command to the queue.
+	      if test "$k" -eq 1 ; then
+		# The first file doesn't have a previous command to add.
+		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+	      else
+		# All subsequent reloadable object files will link in
+		# the last one created.
+		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      fi
+	      last_robj=$output_objdir/$output_la-${k}.$objext
+	      k=`expr $k + 1`
+	      output=$output_objdir/$output_la-${k}.$objext
+	      objlist=$obj
+	      len=1
+	    fi
+	  done
+	  # Handle the remaining objects by creating one last
+	  # reloadable object file.  All subsequent reloadable object
+	  # files will link in the last one created.
+	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+	  if ${skipped_export-false}; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    libobjs=$output
+	    # Append the command to create the export file.
+	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+          fi
+
+	  # Set up a command to remove the reloadable object files
+	  # after they are used.
+	  i=0
+	  while test "$i" -lt "$k"
+	  do
+	    i=`expr $i + 1`
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+	  done
+
+	  $echo "creating a temporary reloadable object file: $output"
+
+	  # Loop through the commands generated above and execute them.
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $concat_cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    cmds=$archive_expsym_cmds
+	  else
+	    cmds=$archive_cmds
+	    fi
+	  fi
+
+	  # Append the command to remove the reloadable object files
+	  # to the just-reset $cmds.
+	  eval cmds=\"\$cmds~\$rm $delfiles\"
+	fi
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $show "$cmd"
+	  $run eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      $show "${rm}r $gentop"
+	      $run ${rm}r "$gentop"
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+	if test -n "$objs$old_deplibs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      cmds=$reload_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $run eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	cmds=$reload_cmds
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi
+      fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	;;
+      esac
+
+      case $host in
+      *darwin*)
+        # Don't allow lazy linking, it breaks C++ global constructors
+        if test "$tagname" = CXX ; then
+        compile_command="$compile_command ${wl}-bind_at_load"
+        finalize_command="$finalize_command ${wl}-bind_at_load"
+        fi
+        ;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case $dlsyms in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    if test -n "$export_symbols_regex"; then
+	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$outputname.exp"
+	      $run $rm $export_symbols
+	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+	    else
+	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+	    $run eval '$echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" |
+		if sort -k 3 </dev/null >/dev/null 2>&1; then
+		  sort -k 3
+		else
+		  sort +2
+		fi |
+		uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
+const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+            else
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            ;;
+          esac
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	exit_status=$?
+
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case $dir in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$run $rm $output
+	# Link the executable and exit
+	$show "$link_command"
+	$run eval "$link_command" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
+  newargz = XMALLOC(char *, argc+2);
+EOF
+
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
+EOF
+
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
+  /* we know the script has the same name, without the .exe */
+  /* so make sure newargz[1] doesn't end in .exe */
+  strendzap(newargz[1],".exe");
+  for (i = 1; i < argc; i++)
+    newargz[i+1] = xstrdup(argv[i]);
+  newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
+EOF
+
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",newargz);
+EOF
+              ;;
+            esac
+
+            cat >> $cwrappersource <<"EOF"
+  return 127;
+}
+
+void *
+xmalloc (size_t num)
+{
+  void * p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable(const char * path)
+{
+  struct stat st;
+
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
+
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert(str != NULL);
+  assert(pat != NULL);
+
+  len = strlen(str);
+  patlen = strlen(pat);
+
+  if (patlen <= len)
+  {
+    str += len - patlen;
+    if (strcmp(str, pat) == 0)
+      *str = '\0';
+  }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+          const char * message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+EOF
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  $echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$echo \"\$relink_command_output\" >&2
+	$rm \"\$progdir/\$file\"
+	exit $EXIT_FAILURE
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  $echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2*)
+	  $echo >> $output "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $echo >> $output "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit $EXIT_FAILURE
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	generated="$generated $gentop"
+
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+       cmds=$old_archive_from_new_cmds
+      else
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $echo "copying selected object files to avoid basename conflicts..."
+
+	  if test -z "$gentop"; then
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "$mkdir $gentop"
+	    $run $mkdir "$gentop"
+	    exit_status=$?
+	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+	      exit $exit_status
+	    fi
+	  fi
+
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		counter=`expr $counter + 1`
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      $run ln "$obj" "$gentop/$newobj" ||
+	      $run cp "$obj" "$gentop/$newobj"
+	      oldobjs="$oldobjs $gentop/$newobj"
+	      ;;
+	    *) oldobjs="$oldobjs $obj" ;;
+	    esac
+	  done
+	fi
+
+	eval cmds=\"$old_archive_cmds\"
+
+	if len=`expr "X$cmds" : ".*"` &&
+	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  $echo "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  for obj in $save_oldobjs
+	  do
+	    oldobjs="$objlist $obj"
+	    objlist="$objlist $obj"
+	    eval test_cmds=\"$old_archive_cmds\"
+	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	       test "$len" -le "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+	        RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+        eval cmd=\"$cmd\"
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		if test -z "$libdir"; then
+		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlfiles="$newdlfiles $libdir/$name"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlprefiles="$newdlprefiles $libdir/$name"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlfiles="$newdlfiles $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlprefiles="$newdlprefiles $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $echo >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) 
+      	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o) prev=$arg ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test "$#" -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit $EXIT_FAILURE
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	library_names=
+	old_library=
+	relink_command=
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  if test "$inst_prefix_dir" = "$destdir"; then
+	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  $echo "$modename: warning: relinking \`$file'" 1>&2
+	  $show "$relink_command"
+	  if $run eval "$relink_command"; then :
+	  else
+	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$srcname $destdir/$realname"
+	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+	  if test -n "$stripme" && test -n "$striplib"; then
+	    $show "$striplib $destdir/$realname"
+	    $run eval "$striplib $destdir/$realname" || exit $?
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  cmds=$postinstall_cmds
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
+	    $show "$cmd"
+	    $run eval "$cmd" || {
+	      lt_exit=$?
+
+	      # Restore the uninstalled library and exit
+	      if test "$mode" = relink; then
+		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      fi
+
+	      exit $lt_exit
+	    }
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      file=`$echo $file|${SED} 's,.exe$,,'`
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin*|*mingw*)
+	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
+	  # If there is no directory component, then add one.
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$notinst_deplibs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case $lib in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
+	  # If there is no directory component, then add one.
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
+	  esac
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir=`func_mktempdir`
+	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway 
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	$show "$old_striplib $oldlib"
+	$run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      cmds=$old_postinstall_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  cmds=$finish_cmds
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit $EXIT_SUCCESS
+
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    $echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $echo "   $libdir"
+    done
+    $echo
+    $echo "If you ever happen to want to link against installed libraries"
+    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      $echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $echo
+    $echo "See any operating system documentation about shared libraries for"
+    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit $EXIT_FAILURE
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit $EXIT_FAILURE
+      fi
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+	$echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    rmdirs=
+
+    origobjdir="$objdir"
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+	dir=.
+	objdir="$origobjdir"
+      else
+	objdir="$dir/$origobjdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test "$mode" = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test "$mode" = clean; then
+	case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+	|| (test -h "$file") >/dev/null 2>&1 \
+	|| test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $objdir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+
+	  case "$mode" in
+	  clean)
+	    case "  $library_names " in
+	    # "  " in the beginning catches empty $dlname
+	    *" $dlname "*) ;;
+	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    esac
+	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      cmds=$postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      cmds=$old_postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+	  # Read the .lo file
+	  . $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" \
+	     && test "$pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" \
+	     && test "$non_pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    file=`$echo $file|${SED} 's,.exe$,,'`
+	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    rmfiles="$rmfiles $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	    relink_command=
+	    . $dir/$noexename
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      rmfiles="$rmfiles $objdir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
+    done
+    objdir="$origobjdir"
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	$show "rmdir $dir"
+	$run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+  esac
+
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
+  exit $EXIT_FAILURE
+fi
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
+  exit $EXIT_SUCCESS
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+  ;;
+esac
+
+$echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+disable_libs=shared
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+disable_libs=static
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/m4/ac_have_attribute.m4 b/m4/ac_have_attribute.m4
new file mode 100644
index 0000000..19f4021
--- /dev/null
+++ b/m4/ac_have_attribute.m4
@@ -0,0 +1,16 @@
+AC_DEFUN([AX_C___ATTRIBUTE__], [
+  AC_MSG_CHECKING(for __attribute__)
+  AC_CACHE_VAL(ac_cv___attribute__, [
+    AC_TRY_COMPILE(
+      [#include <stdlib.h>
+       static void foo(void) __attribute__ ((unused));
+       void foo(void) { exit(1); }],
+      [],
+      ac_cv___attribute__=yes,
+      ac_cv___attribute__=no
+    )])
+  if test "$ac_cv___attribute__" = "yes"; then
+    AC_DEFINE(HAVE___ATTRIBUTE__, 1, [define if your compiler has __attribute__])
+  fi
+  AC_MSG_RESULT($ac_cv___attribute__)
+])
diff --git a/m4/ac_have_builtin_expect.m4 b/m4/ac_have_builtin_expect.m4
new file mode 100644
index 0000000..e91b6fd
--- /dev/null
+++ b/m4/ac_have_builtin_expect.m4
@@ -0,0 +1,14 @@
+AC_DEFUN([AX_C___BUILTIN_EXPECT], [
+  AC_MSG_CHECKING(for __builtin_expect)
+  AC_CACHE_VAL(ac_cv___builtin_expect, [
+    AC_TRY_COMPILE(
+      [int foo(void) { if (__builtin_expect(0, 0)) return 1; return 0; }],
+      [],
+      ac_cv___builtin_expect=yes,
+      ac_cv___builtin_expect=no
+    )])
+  if test "$ac_cv___builtin_expect" = "yes"; then
+    AC_DEFINE(HAVE___BUILTIN_EXPECT, 1, [define if your compiler has __builtin_expect])
+  fi
+  AC_MSG_RESULT($ac_cv___builtin_expect)
+])
diff --git a/m4/ac_rwlock.m4 b/m4/ac_rwlock.m4
new file mode 100644
index 0000000..706efbb
--- /dev/null
+++ b/m4/ac_rwlock.m4
@@ -0,0 +1,31 @@
+# TODO(csilvers): it would be better to actually try to link against
+# -pthreads, to make sure it defines these methods, but that may be
+# too hard, since pthread support is really tricky.
+
+# Check for support for pthread_rwlock_init() etc.
+# These aren't posix, but are widely supported.  To get them on linux,
+# you need to define _XOPEN_SOURCE first, so this check assumes your
+# application does that.
+#
+# Note: OS X (as of 6/1/06) seems to support pthread_rwlock, but
+# doesn't define PTHREAD_RWLOCK_INITIALIZER.  Therefore, we don't test
+# that particularly macro.  It's probably best if you don't use that
+# macro in your code either.
+
+AC_DEFUN([AC_RWLOCK],
+[AC_CACHE_CHECK(support for pthread_rwlock_* functions,
+ac_rwlock,
+[AC_LANG_SAVE
+ AC_LANG_C
+ AC_TRY_COMPILE([#define _XOPEN_SOURCE 500
+                 #include <pthread.h>],
+		[pthread_rwlock_t l; pthread_rwlock_init(&l, NULL);
+                 pthread_rwlock_rdlock(&l); 
+                 return 0;],
+                ac_rwlock=yes, ac_rwlock=no)
+ AC_LANG_RESTORE
+])
+if test "$ac_rwlock" = yes; then
+  AC_DEFINE(HAVE_RWLOCK,1,[define if the compiler implements pthread_rwlock_*])
+fi
+])
diff --git a/m4/acx_pthread.m4 b/m4/acx_pthread.m4
new file mode 100644
index 0000000..f5db4f0
--- /dev/null
+++ b/m4/acx_pthread.m4
@@ -0,0 +1,353 @@
+# This was retrieved from
+#    http://0pointer.de/cgi-bin/viewcvs.cgi/trunk/common/acx_pthread.m4?rev=1227
+# See also (perhaps for new versions?)
+#    http://0pointer.de/cgi-bin/viewcvs.cgi/trunk/common/acx_pthread.m4
+
+dnl @synopsis ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+dnl
+dnl @summary figure out how to build C programs using POSIX threads
+dnl
+dnl This macro figures out how to build C programs using POSIX threads.
+dnl It sets the PTHREAD_LIBS output variable to the threads library and
+dnl linker flags, and the PTHREAD_CFLAGS output variable to any special
+dnl C compiler flags that are needed. (The user can also force certain
+dnl compiler flags/libs to be tested by setting these environment
+dnl variables.)
+dnl
+dnl Also sets PTHREAD_CC to any special C compiler that is needed for
+dnl multi-threaded programs (defaults to the value of CC otherwise).
+dnl (This is necessary on AIX to use the special cc_r compiler alias.)
+dnl
+dnl NOTE: You are assumed to not only compile your program with these
+dnl flags, but also link it with them as well. e.g. you should link
+dnl with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS
+dnl $LIBS
+dnl
+dnl If you are only building threads programs, you may wish to use
+dnl these variables in your default LIBS, CFLAGS, and CC:
+dnl
+dnl        LIBS="$PTHREAD_LIBS $LIBS"
+dnl        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+dnl        CC="$PTHREAD_CC"
+dnl
+dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
+dnl constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to
+dnl that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+dnl
+dnl ACTION-IF-FOUND is a list of shell commands to run if a threads
+dnl library is found, and ACTION-IF-NOT-FOUND is a list of commands to
+dnl run it if it is not found. If ACTION-IF-FOUND is not specified, the
+dnl default action will define HAVE_PTHREAD.
+dnl
+dnl Please let the authors know if this macro fails on any platform, or
+dnl if you have any other suggestions or comments. This macro was based
+dnl on work by SGJ on autoconf scripts for FFTW (www.fftw.org) (with
+dnl help from M. Frigo), as well as ac_pthread and hb_pthread macros
+dnl posted by Alejandro Forero Cuervo to the autoconf macro repository.
+dnl We are also grateful for the helpful feedback of numerous users.
+dnl
+dnl @category InstalledPackages
+dnl @author Steven G. Johnson <stevenj@alum.mit.edu>
+dnl @version 2006-05-29
+dnl @license GPLWithACException
+dnl 
+dnl Checks for GCC shared/pthread inconsistency based on work by
+dnl Marcin Owsiany <marcin@owsiany.pl>
+
+
+AC_DEFUN([ACX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_LANG_SAVE
+AC_LANG_C
+acx_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
+        AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
+        AC_MSG_RESULT($acx_pthread_ok)
+        if test x"$acx_pthread_ok" = xno; then
+                PTHREAD_LIBS=""
+                PTHREAD_CFLAGS=""
+        fi
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try.  Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important.  Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+#       other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+#      doesn't hurt to check since this sometimes defines pthreads too;
+#      also defines -D_REENTRANT)
+#      ... -mt is also the pthreads flag for HP/aCC
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case "${host_cpu}-${host_os}" in
+        *solaris*)
+
+        # On Solaris (at least, for some versions), libc contains stubbed
+        # (non-functional) versions of the pthreads routines, so link-based
+        # tests will erroneously succeed.  (We need to link with -pthreads/-mt/
+        # -lpthread.)  (The stubs are missing pthread_cleanup_push, or rather
+        # a function called by this macro, so we could check for that, but
+        # who knows whether they'll stub that too in a future libc.)  So,
+        # we'll just look for -pthreads and -lpthread first:
+
+        acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags"
+        ;;
+esac
+
+if test x"$acx_pthread_ok" = xno; then
+for flag in $acx_pthread_flags; do
+
+        case $flag in
+                none)
+                AC_MSG_CHECKING([whether pthreads work without any flags])
+                ;;
+
+                -*)
+                AC_MSG_CHECKING([whether pthreads work with $flag])
+                PTHREAD_CFLAGS="$flag"
+                ;;
+
+		pthread-config)
+		AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no)
+		if test x"$acx_pthread_config" = xno; then continue; fi
+		PTHREAD_CFLAGS="`pthread-config --cflags`"
+		PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+		;;
+
+                *)
+                AC_MSG_CHECKING([for the pthreads library -l$flag])
+                PTHREAD_LIBS="-l$flag"
+                ;;
+        esac
+
+        save_LIBS="$LIBS"
+        save_CFLAGS="$CFLAGS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+        # Check for various functions.  We must include pthread.h,
+        # since some functions may be macros.  (On the Sequent, we
+        # need a special flag -Kthread to make this header compile.)
+        # We check for pthread_join because it is in -lpthread on IRIX
+        # while pthread_create is in libc.  We check for pthread_attr_init
+        # due to DEC craziness with -lpthreads.  We check for
+        # pthread_cleanup_push because it is one of the few pthread
+        # functions on Solaris that doesn't have a non-functional libc stub.
+        # We try pthread_create on general principles.
+        AC_TRY_LINK([#include <pthread.h>],
+                    [pthread_t th; pthread_join(th, 0);
+                     pthread_attr_init(0); pthread_cleanup_push(0, 0);
+                     pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+                    [acx_pthread_ok=yes])
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+
+        AC_MSG_RESULT($acx_pthread_ok)
+        if test "x$acx_pthread_ok" = xyes; then
+                break;
+        fi
+
+        PTHREAD_LIBS=""
+        PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$acx_pthread_ok" = xyes; then
+        save_LIBS="$LIBS"
+        LIBS="$PTHREAD_LIBS $LIBS"
+        save_CFLAGS="$CFLAGS"
+        CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+        # Detect AIX lossage: JOINABLE attribute is called UNDETACHED.
+	AC_MSG_CHECKING([for joinable pthread attribute])
+	attr_name=unknown
+	for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do
+	    AC_TRY_LINK([#include <pthread.h>], [int attr=$attr; return attr;],
+                        [attr_name=$attr; break])
+	done
+        AC_MSG_RESULT($attr_name)
+        if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then
+            AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name,
+                               [Define to necessary symbol if this constant
+                                uses a non-standard name on your system.])
+        fi
+
+        AC_MSG_CHECKING([if more special flags are required for pthreads])
+        flag=no
+        case "${host_cpu}-${host_os}" in
+            *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
+            *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
+        esac
+        AC_MSG_RESULT(${flag})
+        if test "x$flag" != xno; then
+            PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+        fi
+
+        LIBS="$save_LIBS"
+        CFLAGS="$save_CFLAGS"
+        # More AIX lossage: must compile with xlc_r or cc_r
+	if test x"$GCC" != xyes; then
+          AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC})
+        else
+          PTHREAD_CC=$CC
+	fi
+
+   # The next part tries to detect GCC inconsistency with -shared on some
+   # architectures and systems. The problem is that in certain
+   # configurations, when -shared is specified, GCC "forgets" to
+   # internally use various flags which are still necessary.
+   
+   AC_MSG_CHECKING([whether to check for GCC pthread/shared inconsistencies])
+   check_inconsistencies=yes
+   case "${host_cpu}-${host_os}" in
+     *-darwin*) check_inconsistencies=no ;;
+   esac
+   if test x"$GCC" != xyes -o "x$check_inconsistencies" != xyes ; then
+      AC_MSG_RESULT([no])
+   else
+      AC_MSG_RESULT([yes])
+
+      # In order not to create several levels of indentation, we test
+      # the value of "$ok" until we find out the cure or run out of
+      # ideas.
+      ok="no"
+
+      #
+      # Prepare the flags
+      #
+      save_CFLAGS="$CFLAGS"
+      save_LIBS="$LIBS"
+      save_CC="$CC"
+      # Try with the flags determined by the earlier checks.
+      #
+      # -Wl,-z,defs forces link-time symbol resolution, so that the
+      # linking checks with -shared actually have any value
+      #
+      # FIXME: -fPIC is required for -shared on many architectures,
+      # so we specify it here, but the right way would probably be to
+      # properly detect whether it is actually required.
+      CFLAGS="-shared -fPIC -Wl,-z,defs $CFLAGS $PTHREAD_CFLAGS"
+      LIBS="$PTHREAD_LIBS $LIBS"
+      CC="$PTHREAD_CC"
+
+      AC_MSG_CHECKING([whether -pthread is sufficient with -shared])
+      AC_TRY_LINK([#include <pthread.h>],
+         [pthread_t th; pthread_join(th, 0);
+         pthread_attr_init(0); pthread_cleanup_push(0, 0);
+         pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+         [ok=yes])
+      
+      if test "x$ok" = xyes; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+      fi
+   
+      #
+      # Linux gcc on some architectures such as mips/mipsel forgets
+      # about -lpthread
+      #
+      if test x"$ok" = xno; then
+         AC_MSG_CHECKING([whether -lpthread fixes that])
+         LIBS="-lpthread $PTHREAD_LIBS $save_LIBS"
+         AC_TRY_LINK([#include <pthread.h>],
+            [pthread_t th; pthread_join(th, 0);
+            pthread_attr_init(0); pthread_cleanup_push(0, 0);
+            pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+            [ok=yes])
+   
+         if test "x$ok" = xyes; then
+            AC_MSG_RESULT([yes])
+            PTHREAD_LIBS="-lpthread $PTHREAD_LIBS"
+         else
+            AC_MSG_RESULT([no])
+         fi
+      fi
+      #
+      # FreeBSD 4.10 gcc forgets to use -lc_r instead of -lc
+      #
+      if test x"$ok" = xno; then
+         AC_MSG_CHECKING([whether -lc_r fixes that])
+         LIBS="-lc_r $PTHREAD_LIBS $save_LIBS"
+         AC_TRY_LINK([#include <pthread.h>],
+             [pthread_t th; pthread_join(th, 0);
+              pthread_attr_init(0); pthread_cleanup_push(0, 0);
+              pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+             [ok=yes])
+   
+         if test "x$ok" = xyes; then
+            AC_MSG_RESULT([yes])
+            PTHREAD_LIBS="-lc_r $PTHREAD_LIBS"
+         else
+            AC_MSG_RESULT([no])
+         fi
+      fi
+      if test x"$ok" = xno; then
+         # OK, we have run out of ideas
+         AC_MSG_WARN([Impossible to determine how to use pthreads with shared libraries])
+
+         # so it's not safe to assume that we may use pthreads
+         acx_pthread_ok=no
+      fi
+
+      CFLAGS="$save_CFLAGS"
+      LIBS="$save_LIBS"
+      CC="$save_CC"
+   fi
+else
+        PTHREAD_CC="$CC"
+fi
+
+AC_SUBST(PTHREAD_LIBS)
+AC_SUBST(PTHREAD_CFLAGS)
+AC_SUBST(PTHREAD_CC)
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$acx_pthread_ok" = xyes; then
+        ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
+        :
+else
+        acx_pthread_ok=no
+        $2
+fi
+AC_LANG_RESTORE
+])dnl ACX_PTHREAD
diff --git a/m4/google_namespace.m4 b/m4/google_namespace.m4
new file mode 100644
index 0000000..79e0a6d
--- /dev/null
+++ b/m4/google_namespace.m4
@@ -0,0 +1,36 @@
+# Allow users to override the namespace we define our application's classes in
+# Arg $1 is the default namespace to use if --enable-namespace isn't present.
+
+# In general, $1 should be 'google', so we put all our exported symbols in a
+# unique namespace that is not likely to conflict with anyone else.  However,
+# when it makes sense -- for instance, when publishing stl-like code -- you
+# may want to go with a different default, like 'std'.
+
+AC_DEFUN([AC_DEFINE_GOOGLE_NAMESPACE],
+  [google_namespace_default=[$1]
+   AC_ARG_ENABLE(namespace, [  --enable-namespace=FOO to define these Google
+                             classes in the FOO namespace. --disable-namespace
+                             to define them in the global namespace. Default
+                             is to define them in namespace $1.],
+                 [case "$enableval" in
+                    yes) google_namespace="$google_namespace_default" ;;
+                     no) google_namespace="" ;;
+                      *) google_namespace="$enableval" ;;
+                  esac],
+                 [google_namespace="$google_namespace_default"])
+   if test -n "$google_namespace"; then
+     ac_google_namespace="$google_namespace"
+     ac_google_start_namespace="namespace $google_namespace {"
+     ac_google_end_namespace="}"
+   else
+     ac_google_namespace=""
+     ac_google_start_namespace=""
+     ac_google_end_namespace=""
+   fi
+   AC_DEFINE_UNQUOTED(GOOGLE_NAMESPACE, $ac_google_namespace,
+                      Namespace for Google classes)
+   AC_DEFINE_UNQUOTED(_START_GOOGLE_NAMESPACE_, $ac_google_start_namespace,
+                      Puts following code inside the Google namespace)
+   AC_DEFINE_UNQUOTED(_END_GOOGLE_NAMESPACE_,  $ac_google_end_namespace,
+                      Stops putting the code inside the Google namespace)
+])
diff --git a/m4/namespaces.m4 b/m4/namespaces.m4
new file mode 100644
index 0000000..d78dbe4
--- /dev/null
+++ b/m4/namespaces.m4
@@ -0,0 +1,15 @@
+# Checks whether the compiler implements namespaces
+AC_DEFUN([AC_CXX_NAMESPACES],
+ [AC_CACHE_CHECK(whether the compiler implements namespaces,
+                 ac_cv_cxx_namespaces,
+                 [AC_LANG_SAVE
+                  AC_LANG_CPLUSPLUS
+                  AC_TRY_COMPILE([namespace Outer {
+                                    namespace Inner { int i = 0; }}],
+                                 [using namespace Outer::Inner; return i;],
+                                 ac_cv_cxx_namespaces=yes,
+                                 ac_cv_cxx_namespaces=no)
+                  AC_LANG_RESTORE])
+  if test "$ac_cv_cxx_namespaces" = yes; then
+    AC_DEFINE(HAVE_NAMESPACES, 1, [define if the compiler implements namespaces])
+  fi])
diff --git a/m4/stl_namespace.m4 b/m4/stl_namespace.m4
new file mode 100644
index 0000000..989ad80
--- /dev/null
+++ b/m4/stl_namespace.m4
@@ -0,0 +1,25 @@
+# We check what namespace stl code like vector expects to be executed in
+
+AC_DEFUN([AC_CXX_STL_NAMESPACE],
+  [AC_CACHE_CHECK(
+      what namespace STL code is in,
+      ac_cv_cxx_stl_namespace,
+      [AC_REQUIRE([AC_CXX_NAMESPACES])
+      AC_LANG_SAVE
+      AC_LANG_CPLUSPLUS
+      AC_TRY_COMPILE([#include <vector>],
+                     [vector<int> t; return 0;],
+                     ac_cv_cxx_stl_namespace=none)
+      AC_TRY_COMPILE([#include <vector>],
+                     [std::vector<int> t; return 0;],
+                     ac_cv_cxx_stl_namespace=std)
+      AC_LANG_RESTORE])
+   if test "$ac_cv_cxx_stl_namespace" = none; then
+      AC_DEFINE(STL_NAMESPACE,,
+                [the namespace where STL code like vector<> is defined])
+   fi
+   if test "$ac_cv_cxx_stl_namespace" = std; then
+      AC_DEFINE(STL_NAMESPACE,std,
+                [the namespace where STL code like vector<> is defined])
+   fi
+])
diff --git a/m4/using_operator.m4 b/m4/using_operator.m4
new file mode 100644
index 0000000..95a9951
--- /dev/null
+++ b/m4/using_operator.m4
@@ -0,0 +1,15 @@
+AC_DEFUN([AC_CXX_USING_OPERATOR],
+  [AC_CACHE_CHECK(
+      whether compiler supports using ::operator<<,
+      ac_cv_cxx_using_operator,
+      [AC_LANG_SAVE
+       AC_LANG_CPLUSPLUS
+       AC_TRY_COMPILE([#include <iostream>
+                       std::ostream& operator<<(std::ostream&, struct s);],
+                      [using ::operator<<; return 0;],
+                      ac_cv_cxx_using_operator=1,
+		      ac_cv_cxx_using_operator=0)
+      AC_LANG_RESTORE])
+  if test "$ac_cv_cxx_using_operator" = 1; then
+    AC_DEFINE(HAVE_USING_OPERATOR, 1, [define if the compiler supports using expression for operator])
+  fi])
diff --git a/missing b/missing
new file mode 100755
index 0000000..894e786
--- /dev/null
+++ b/missing
@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/mkinstalldirs b/mkinstalldirs
new file mode 100755
index 0000000..259dbfc
--- /dev/null
+++ b/mkinstalldirs
@@ -0,0 +1,158 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+
+scriptversion=2005-06-29.22
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+errstatus=0
+dirmode=
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage"
+      exit $?
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --version)
+      echo "$0 $scriptversion"
+      exit $?
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error.  This is a problem when calling mkinstalldirs
+# from a parallel make.  We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+  '')
+    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    else
+      # On NextStep and OpenStep, the `mkdir' command does not
+      # recognize any option.  It will interpret all options as
+      # directories to create, and then abort because `.' already
+      # exists.
+      test -d ./-p && rmdir ./-p
+      test -d ./--version && rmdir ./--version
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+       test ! -d ./--version; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    else
+      # Clean up after NextStep and OpenStep mkdir.
+      for d in ./-m ./-p ./--version "./$dirmode";
+      do
+        test -d $d && rmdir $d
+      done
+    fi
+    ;;
+esac
+
+for file
+do
+  case $file in
+    /*) pathcomp=/ ;;
+    *)  pathcomp= ;;
+  esac
+  oIFS=$IFS
+  IFS=/
+  set fnord $file
+  shift
+  IFS=$oIFS
+
+  for d
+  do
+    test "x$d" = x && continue
+
+    pathcomp=$pathcomp$d
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
+
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
+
+      mkdir "$pathcomp" || lasterr=$?
+
+      if test ! -d "$pathcomp"; then
+	errstatus=$lasterr
+      else
+	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+	  lasterr=
+	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	  if test ! -z "$lasterr"; then
+	    errstatus=$lasterr
+	  fi
+	fi
+      fi
+    fi
+
+    pathcomp=$pathcomp/
+  done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/packages/deb.sh b/packages/deb.sh
new file mode 100755
index 0000000..ced98fa
--- /dev/null
+++ b/packages/deb.sh
@@ -0,0 +1,70 @@
+#!/bin/bash -e
+
+# This takes one commandline argument, the name of the package.  If no
+# name is given, then we'll end up just using the name associated with
+# an arbitrary .tar.gz file in the rootdir.  That's fine: there's probably
+# only one.
+#
+# Run this from the 'packages' directory, just under rootdir
+
+## Set LIB to lib if exporting a library, empty-string else
+LIB=
+#LIB=lib
+
+PACKAGE="$1"
+
+# We can only build Debian packages, if the Debian build tools are installed
+if [ \! -x /usr/bin/debuild ]; then
+  echo "Cannot find /usr/bin/debuild. Not building Debian packages." 1>&2
+  exit 0
+fi
+
+# Double-check we're in the packages directory, just under rootdir
+if [ \! -r ../Makefile -a \! -r ../INSTALL ]; then
+  echo "Must run $0 in the 'packages' directory, under the root directory." 1>&2
+  echo "Also, you must run \"make dist\" before running this script." 1>&2
+  exit 0
+fi
+
+# Find the top directory for this package
+topdir="${PWD%/*}"
+
+# Find the tar archive built by "make dist"
+archive="$(basename "$(ls -1 ${topdir}/$PACKAGE*.tar.gz | tail -n 1)" .tar.gz)"
+if [ -z "${archive}" ]; then
+  echo "Cannot find ../$PACKAGE*.tar.gz. Run \"make dist\" first." 1>&2
+  exit 0
+fi
+
+# Create a pristine directory for building the Debian package files
+trap 'rm -rf '`pwd`/tmp'; exit $?' EXIT SIGHUP SIGINT SIGTERM
+
+rm -rf tmp
+mkdir -p tmp
+cd tmp
+
+# Debian has very specific requirements about the naming of build
+# directories, and tar archives. It also wants to write all generated
+# packages to the parent of the source directory. We accommodate these
+# requirements by building directly from the tar file.
+ln -s "${topdir}/${archive}.tar.gz" "${LIB}${archive}.orig.tar.gz"
+tar zfx "${LIB}${archive}.orig.tar.gz"
+[ -n "${LIB}" ] && mv "${archive}" "${LIB}${archive}"
+cd "${LIB}${archive}"
+# This is one of those 'specific requirements': where the deb control files live
+ln -s "packages/deb" "debian"
+
+# Now, we can call Debian's standard build tool
+debuild -uc -us
+cd ../..                            # get back to the original top-level dir
+
+# We'll put the result in a subdirectory that's named after the OS version
+# we've made this .deb file for.
+destdir="debian-$(cat /etc/debian_version 2>/dev/null || echo UNKNOWN)"
+
+rm -rf "$destdir"
+mkdir -p "$destdir"
+mv $(find tmp -mindepth 1 -maxdepth 1 -type f) "$destdir"
+
+echo
+echo "The Debian package files are located in $PWD/$destdir"
diff --git a/packages/deb/README b/packages/deb/README
new file mode 100644
index 0000000..57becfd
--- /dev/null
+++ b/packages/deb/README
@@ -0,0 +1,7 @@
+The list of files here isn't complete.  For a step-by-step guide on
+how to set this package up correctly, check out
+    http://www.debian.org/doc/maint-guide/
+
+Most of the files that are in this directory are boilerplate.
+However, you may need to change the list of binary-arch dependencies
+in 'rules'.
diff --git a/packages/deb/changelog b/packages/deb/changelog
new file mode 100644
index 0000000..007d8ad
--- /dev/null
+++ b/packages/deb/changelog
@@ -0,0 +1,5 @@
+google-glog (0.1-1) unstable; urgency=low
+
+  * Initial release.
+
+ -- Google Inc. <opensource@google.com>  Sat, 10 May 2008 12:31:10 +0900
diff --git a/packages/deb/compat b/packages/deb/compat
new file mode 100644
index 0000000..b8626c4
--- /dev/null
+++ b/packages/deb/compat
@@ -0,0 +1 @@
+4
diff --git a/packages/deb/control b/packages/deb/control
new file mode 100644
index 0000000..110a72c
--- /dev/null
+++ b/packages/deb/control
@@ -0,0 +1,23 @@
+Source: google-glog
+Priority: optional
+Maintainer: Google Inc. <opensource@google.com>
+Build-Depends: debhelper (>= 4.0.0), binutils
+Standards-Version: 3.6.1
+
+Package: libgoogle-glog-dev
+Section: libdevel
+Architecture: any
+Depends: libgoogle-glog0 (= ${Source-Version})
+Description:  a library that implements application-level logging.
+ This library provides logging APIs based on C++-style streams and
+ various helper macros.  The devel package contains static and debug
+ libraries and header files for developing applications that use the
+ google-glog package.
+
+Package: libgoogle-glog0
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}
+Description:  a library that implements application-level logging.
+ This library provides logging APIs based on C++-style streams and
+ various helper macros.
diff --git a/packages/deb/copyright b/packages/deb/copyright
new file mode 100644
index 0000000..ed9d9d1
--- /dev/null
+++ b/packages/deb/copyright
@@ -0,0 +1,35 @@
+This package was debianized by Google Inc. <opensource@google.com> on
+13 June 2008.
+
+It was downloaded from http://code.google.com/
+
+Upstream Author: opensource@google.com
+
+Copyright (c) 2008, Google Inc.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:
+
+    * Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above
+copyright notice, this list of conditions and the following disclaimer
+in the documentation and/or other materials provided with the
+distribution.
+    * Neither the name of Google Inc. nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/packages/deb/docs b/packages/deb/docs
new file mode 100644
index 0000000..c3d0789
--- /dev/null
+++ b/packages/deb/docs
@@ -0,0 +1,8 @@
+AUTHORS
+COPYING
+ChangeLog
+INSTALL
+NEWS
+README
+doc/designstyle.css
+doc/glog.html
diff --git a/packages/deb/libgoogle-glog-dev.dirs b/packages/deb/libgoogle-glog-dev.dirs
new file mode 100644
index 0000000..d2a9fbc
--- /dev/null
+++ b/packages/deb/libgoogle-glog-dev.dirs
@@ -0,0 +1,3 @@
+usr/lib
+usr/include
+usr/include/glog
diff --git a/packages/deb/libgoogle-glog-dev.install b/packages/deb/libgoogle-glog-dev.install
new file mode 100644
index 0000000..8190546
--- /dev/null
+++ b/packages/deb/libgoogle-glog-dev.install
@@ -0,0 +1,8 @@
+usr/include/glog/*
+usr/lib/lib*.so
+usr/lib/lib*.a
+usr/lib/*.la
+debian/tmp/usr/include/glog/*
+debian/tmp/usr/lib/lib*.so
+debian/tmp/usr/lib/lib*.a
+debian/tmp/usr/lib/*.la
diff --git a/packages/deb/libgoogle-glog0.dirs b/packages/deb/libgoogle-glog0.dirs
new file mode 100644
index 0000000..6845771
--- /dev/null
+++ b/packages/deb/libgoogle-glog0.dirs
@@ -0,0 +1 @@
+usr/lib
diff --git a/packages/deb/libgoogle-glog0.install b/packages/deb/libgoogle-glog0.install
new file mode 100644
index 0000000..704ea87
--- /dev/null
+++ b/packages/deb/libgoogle-glog0.install
@@ -0,0 +1,2 @@
+usr/lib/lib*.so.*
+debian/tmp/usr/lib/lib*.so.*
diff --git a/packages/deb/rules b/packages/deb/rules
new file mode 100755
index 0000000..f520bef
--- /dev/null
+++ b/packages/deb/rules
@@ -0,0 +1,117 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+
+CFLAGS = -Wall -g
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -O0
+else
+	CFLAGS += -O2
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+# shared library versions, option 1
+#version=2.0.5
+#major=2
+# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
+version=`ls src/.libs/lib*.so.* | \
+ awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
+major=`ls src/.libs/lib*.so.* | \
+ awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
+
+config.status: configure
+	dh_testdir
+	# Add here commands to configure the package.
+	CFLAGS="$(CFLAGS)" ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
+
+
+build: build-stamp
+build-stamp:  config.status
+	dh_testdir
+
+	# Add here commands to compile the package.
+	$(MAKE)
+
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp 
+
+	# Add here commands to clean up after the build process.
+	-$(MAKE) distclean
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+	cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+	cp -f /usr/share/misc/config.guess config.guess
+endif
+
+
+	dh_clean 
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k 
+	dh_installdirs
+
+	# Add here commands to install the package into debian/tmp
+	$(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs ChangeLog
+	dh_installdocs
+	dh_installexamples
+	dh_install --sourcedir=debian/tmp
+#	dh_installmenu
+#	dh_installdebconf	
+#	dh_installlogrotate
+#	dh_installemacsen
+#	dh_installpam
+#	dh_installmime
+#	dh_installinit
+#	dh_installcron
+#	dh_installinfo
+	dh_installman
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+#	dh_perl
+#	dh_python
+	dh_makeshlibs
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install 
diff --git a/packages/rpm.sh b/packages/rpm.sh
new file mode 100755
index 0000000..5395dc0
--- /dev/null
+++ b/packages/rpm.sh
@@ -0,0 +1,75 @@
+#!/bin/sh -e
+
+# Run this from the 'packages' directory, just under rootdir
+
+# We can only build rpm packages, if the rpm build tools are installed
+if [ \! -x /usr/bin/rpmbuild ]
+then
+  echo "Cannot find /usr/bin/rpmbuild. Not building an rpm." 1>&2
+  exit 0
+fi
+
+# Check the commandline flags
+PACKAGE="$1"
+VERSION="$2"
+fullname="${PACKAGE}-${VERSION}"
+archive=../$fullname.tar.gz
+
+if [ -z "$1" -o -z "$2" ]
+then
+  echo "Usage: $0 <package name> <package version>" 1>&2
+  exit 0
+fi
+
+# Double-check we're in the packages directory, just under rootdir
+if [ \! -r ../Makefile -a \! -r ../INSTALL ]
+then
+  echo "Must run $0 in the 'packages' directory, under the root directory." 1>&2
+  echo "Also, you must run \"make dist\" before running this script." 1>&2
+  exit 0
+fi
+
+if [ \! -r "$archive" ]
+then
+  echo "Cannot find $archive. Run \"make dist\" first." 1>&2
+  exit 0
+fi
+
+# Create the directory where the input lives, and where the output should live
+RPM_SOURCE_DIR="/tmp/rpmsource-$fullname"
+RPM_BUILD_DIR="/tmp/rpmbuild-$fullname"
+
+trap 'rm -rf $RPM_SOURCE_DIR $RPM_BUILD_DIR; exit $?' EXIT SIGHUP SIGINT SIGTERM
+
+rm -rf "$RPM_SOURCE_DIR" "$RPM_BUILD_DIR"
+mkdir "$RPM_SOURCE_DIR"
+mkdir "$RPM_BUILD_DIR"
+
+cp "$archive" "$RPM_SOURCE_DIR"
+
+rpmbuild -bb rpm/rpm.spec \
+  --define "NAME $PACKAGE" \
+  --define "VERSION $VERSION" \
+  --define "_sourcedir $RPM_SOURCE_DIR" \
+  --define "_builddir $RPM_BUILD_DIR" \
+  --define "_rpmdir $RPM_SOURCE_DIR"
+
+# We put the output in a directory based on what system we've built for
+destdir=rpm-unknown
+if [ -r /etc/issue ]
+then
+   grep "Red Hat.*release 7" /etc/issue >/dev/null 2>&1 && destdir=rh7
+   grep "Red Hat.*release 8" /etc/issue >/dev/null 2>&1 && destdir=rh8
+   grep "Red Hat.*release 9" /etc/issue >/dev/null 2>&1 && destdir=rh9
+   if grep Fedora /etc/issue >/dev/null; then 
+	destdir=fc`grep Fedora /etc/issue | cut -d' ' -f 4`;
+   fi
+fi
+
+rm -rf "$destdir"
+mkdir -p "$destdir"
+# We want to get not only the main package but devel etc, hence the middle *
+mv "$RPM_SOURCE_DIR"/*/"${PACKAGE}"-*"${VERSION}"*.rpm "$destdir"
+
+echo
+echo "The rpm package file(s) are located in $PWD/$destdir"
diff --git a/packages/rpm/rpm.spec b/packages/rpm/rpm.spec
new file mode 100644
index 0000000..b279982
--- /dev/null
+++ b/packages/rpm/rpm.spec
@@ -0,0 +1,71 @@
+%define	RELEASE	1
+%define rel     %{?CUSTOM_RELEASE} %{!?CUSTOM_RELEASE:%RELEASE}
+%define	prefix	/usr
+
+Name: %NAME
+Summary: A C++ application logging library
+Version: %VERSION
+Release: %rel
+Group: Development/Libraries
+URL: http://code.google.com/p/google-glog
+License: BSD
+Vendor: Google
+Packager: Google Inc. <opensource@google.com>
+Source: http://%{NAME}.googlecode.com/files/%{NAME}-%{VERSION}.tar.gz
+Distribution: Redhat 7 and above.
+Buildroot: %{_tmppath}/%{name}-root
+Prefix: %prefix
+
+%description
+The %name package contains a library that implements application-level
+logging.  This library provides logging APIs based on C++-style
+streams and various helper macros.
+
+%package devel
+Summary: A C++ application logging library
+Group: Development/Libraries
+Requires: %{NAME} = %{VERSION}
+
+%description devel
+The %name-devel package contains static and debug libraries and header
+files for developing applications that use the %name package.
+
+%changelog
+    * Wed Mar 26 2008 <opensource@google.com>
+    - First draft
+
+%prep
+%setup
+
+%build
+./configure
+make prefix=%prefix
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make prefix=$RPM_BUILD_ROOT%{prefix} install
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+
+## Mark all installed files within /usr/share/doc/{package name} as
+## documentation.  This depends on the following two lines appearing in
+## Makefile.am:
+##     docdir = $(prefix)/share/doc/$(PACKAGE)-$(VERSION)
+##     dist_doc_DATA = AUTHORS COPYING ChangeLog INSTALL NEWS README
+%docdir %{prefix}/share/doc/%{NAME}-%{VERSION}
+%{prefix}/share/doc/%{NAME}-%{VERSION}/*
+
+%{prefix}/lib/libglog.so.0
+%{prefix}/lib/libglog.so.0.0.0
+
+%files devel
+%defattr(-,root,root)
+
+%{prefix}/include/glog
+%{prefix}/lib/libglog.a
+%{prefix}/lib/libglog.la
+%{prefix}/lib/libglog.so
diff --git a/src/base/commandlineflags.h b/src/base/commandlineflags.h
new file mode 100644
index 0000000..5c5011e
--- /dev/null
+++ b/src/base/commandlineflags.h
@@ -0,0 +1,117 @@
+// Copyright (c) 2008, Google Inc.
+// All rights reserved.
+// 
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// 
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+// 
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// ---
+// This file is a compatibility layer that defines Google's version of
+// command line flags that are used for configuration.
+//
+// We put flags into their own namespace.  It is purposefully
+// named in an opaque way that people should have trouble typing
+// directly.  The idea is that DEFINE puts the flag in the weird
+// namespace, and DECLARE imports the flag from there into the
+// current namespace.  The net result is to force people to use
+// DECLARE to get access to a flag, rather than saying
+//   extern bool FLAGS_logtostderr;
+// or some such instead.  We want this so we can put extra
+// functionality (like sanity-checking) in DECLARE if we want,
+// and make sure it is picked up everywhere.
+//
+// We also put the type of the variable in the namespace, so that
+// people can't DECLARE_int32 something that they DEFINE_bool'd
+// elsewhere.
+#ifndef BASE_COMMANDLINEFLAGS_H__
+#define BASE_COMMANDLINEFLAGS_H__
+
+#include "config.h"
+#include <string>
+#include <string.h>               // for memchr
+#include <stdlib.h>               // for getenv
+
+#ifdef HAVE_LIB_GFLAGS
+
+#include <gflags/gflags.h>
+
+#else
+
+#include "glog/logging.h"
+
+#define DECLARE_VARIABLE(type, name, tn)                                      \
+  namespace FLAG__namespace_do_not_use_directly_use_DECLARE_##tn##_instead {  \
+  extern type FLAGS_##name;                                                   \
+  }                                                                           \
+  using FLAG__namespace_do_not_use_directly_use_DECLARE_##tn##_instead::FLAGS_##name
+#define DEFINE_VARIABLE(type, name, value, meaning, tn) \
+  namespace FLAG__namespace_do_not_use_directly_use_DECLARE_##tn##_instead {  \
+  type FLAGS_##name(value);                                                   \
+  char FLAGS_no##name;                                                        \
+  }                                                                           \
+  using FLAG__namespace_do_not_use_directly_use_DECLARE_##tn##_instead::FLAGS_##name
+
+// bool specialization
+#define DECLARE_bool(name) \
+  DECLARE_VARIABLE(bool, name, bool)
+#define DEFINE_bool(name, value, meaning) \
+  DEFINE_VARIABLE(bool, name, EnvToBool("GLOG_" #name, value), meaning, bool)
+
+// int32 specialization
+#define DECLARE_int32(name) \
+  DECLARE_VARIABLE(@ac_google_namespace@::int32, name, int32)
+#define DEFINE_int32(name, value, meaning) \
+  DEFINE_VARIABLE(GOOGLE_NAMESPACE::int32, name, \
+                  EnvToInt("GLOG_" #name, value), meaning, int32)
+
+// Special case for string, because we have to specify the namespace
+// std::string, which doesn't play nicely with our FLAG__namespace hackery.
+#define DECLARE_string(name)                                          \
+  namespace FLAG__namespace_do_not_use_directly_use_DECLARE_string_instead {  \
+  extern std::string FLAGS_##name;                                            \
+  }                                                                           \
+  using FLAG__namespace_do_not_use_directly_use_DECLARE_string_instead::FLAGS_##name
+#define DEFINE_string(name, value, meaning) \
+  namespace FLAG__namespace_do_not_use_directly_use_DECLARE_string_instead {  \
+  std::string FLAGS_##name(EnvToString("GLOG_" #name, value));                \
+  char FLAGS_no##name;                                                        \
+  }                                                                           \
+  using FLAG__namespace_do_not_use_directly_use_DECLARE_string_instead::FLAGS_##name
+
+// These macros (could be functions, but I don't want to bother with a .cc
+// file), make it easier to initialize flags from the environment.
+
+#define EnvToString(envname, dflt)   \
+  (!getenv(envname) ? (dflt) : getenv(envname))
+
+#define EnvToBool(envname, dflt)   \
+  (!getenv(envname) ? (dflt) : memchr("tTyY1\0", getenv(envname)[0], 6) != NULL)
+
+#define EnvToInt(envname, dflt)  \
+  (!getenv(envname) ? (dflt) : strtol(getenv(envname), NULL, 10))
+
+#endif  // HAVE_LIB_GFLAGS
+
+#endif  // BASE_COMMANDLINEFLAGS_H__
diff --git a/src/base/googleinit.h b/src/base/googleinit.h
new file mode 100644
index 0000000..c907308
--- /dev/null
+++ b/src/base/googleinit.h
@@ -0,0 +1,51 @@
+// Copyright (c) 2008, Google Inc.
+// All rights reserved.
+// 
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// 
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+// 
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// ---
+// Author: Jacob Hoffman-Andrews
+
+#ifndef _GOOGLEINIT_H
+#define _GOOGLEINIT_H
+
+class GoogleInitializer {
+ public:
+  typedef void (*void_function)(void);
+  GoogleInitializer(const char* name, void_function f) {
+    f();
+  }
+};
+
+#define REGISTER_MODULE_INITIALIZER(name, body)                 \
+  namespace {                                                   \
+    static void google_init_module_##name () { body; }          \
+    GoogleInitializer google_initializer_module_##name(#name,   \
+            google_init_module_##name);                         \
+  }
+
+#endif /* _GOOGLEINIT_H */
diff --git a/src/base/mutex.h b/src/base/mutex.h
new file mode 100644
index 0000000..4a0cc2d
--- /dev/null
+++ b/src/base/mutex.h
@@ -0,0 +1,252 @@
+/* Copyright (c) 2007, Google Inc.
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * 
+ *     * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following disclaimer
+ * in the documentation and/or other materials provided with the
+ * distribution.
+ *     * Neither the name of Google Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * ---
+ * Author: Craig Silverstein.
+ *
+ * A simple mutex wrapper, supporting locks and read-write locks.
+ * You should assume the locks are *not* re-entrant.
+ *
+ * To use: you should define the following macros in your configure.ac:
+ *   ACX_PTHREAD
+ *   AC_RWLOCK
+ * The latter is defined in ../autoconf.
+ *
+ * This class is meant to be internal-only, so it's defined in the
+ * global namespace.  If you want to expose it, you'll want to move
+ * it to the Google namespace.
+ *
+ * NOTE: by default, we have #ifdef'ed out the TryLock() method.
+ *       This is for two reasons:
+ * 1) TryLock() under Windows is a bit annoying (it requires a
+ *    #define to be defined very early).
+ * 2) TryLock() is broken for NO_THREADS mode, at least in NDEBUG
+ *    mode.
+ * If you need TryLock(), and either these two caveats are not a
+ * problem for you, or you're willing to work around them, then
+ * feel free to #define GMUTEX_TRYLOCK, or to remove the #ifdefs
+ * in the code below.
+ */
+
+// TODO(hamaji): Probably we must provide way to ensure static mutexes are
+//               initialized before they are used.
+//               (Google3's NO_CONSTRUCTOR_NEEDED_FOR_STATIC_MUTEX)
+
+#ifndef GOOGLE_MUTEX_H__
+#define GOOGLE_MUTEX_H__
+
+#include "config.h"           // to figure out pthreads support
+#include "utilities.h"        // to get OS_* macro
+
+#if defined(NO_THREADS)
+  typedef int MutexType;      // to keep a lock-count
+#elif defined(HAVE_PTHREAD) && defined(HAVE_RWLOCK)
+  // Needed for pthread_rwlock_*.  If it causes problems, you could take it
+  // out, but then you'd have to unset HAVE_RWLOCK (at least on linux -- it
+  // *does* cause problems for FreeBSD, or MacOSX, but isn't needed
+  // for locking there.)
+# ifdef __linux__
+#   define _XOPEN_SOURCE 500  // may be needed to get the rwlock calls
+# endif
+# include <pthread.h>
+  typedef pthread_rwlock_t MutexType;
+#elif defined(HAVE_PTHREAD)
+# include <pthread.h>
+  typedef pthread_mutex_t MutexType;
+#elif defined(OS_WINDOWS)
+# define WIN32_LEAN_AND_MEAN  // We only need minimal includes
+# ifdef GMUTEX_TRYLOCK
+  // We need Windows NT or later for TryEnterCriticalSection().  If you
+  // don't need that functionality, you can remove these _WIN32_WINNT
+  // lines, and change TryLock() to assert(0) or something.
+#   ifndef _WIN32_WINNT
+#     define _WIN32_WINNT 0x0400
+#   endif
+# endif
+// To avoid macro definition of ERROR.
+# define NOGDI
+# include <windows.h>
+  typedef CRITICAL_SECTION MutexType;
+#else
+# error Need to implement mutex.h for your architecture, or #define NO_THREADS
+#endif
+
+class Mutex {
+ public:
+  // Create a Mutex that is not held by anybody.  This constructor is
+  // typically used for Mutexes allocated on the heap or the stack.
+  // See below for a recommendation for constructing global Mutex
+  // objects.
+  inline Mutex();
+
+  // Destructor
+  inline ~Mutex();
+
+  inline void Lock();    // Block if needed until free then acquire exclusively
+  inline void Unlock();  // Release a lock acquired via Lock()
+#ifdef GMUTEX_TRYLOCK
+  inline bool TryLock(); // If free, Lock() and return true, else return false
+#endif
+  // Note that on systems that don't support read-write locks, these may
+  // be implemented as synonyms to Lock() and Unlock().  So you can use
+  // these for efficiency, but don't use them anyplace where being able
+  // to do shared reads is necessary to avoid deadlock.
+  inline void ReaderLock();   // Block until free or shared then acquire a share
+  inline void ReaderUnlock(); // Release a read share of this Mutex
+  inline void WriterLock() { Lock(); }     // Acquire an exclusive lock
+  inline void WriterUnlock() { Unlock(); } // Release a lock from WriterLock()
+
+  // TODO(hamaji): Do nothing, implement correctly.
+  inline void AssertHeld() {}
+
+ private:
+  MutexType mutex_;
+
+  // Catch the error of writing Mutex when intending MutexLock.
+  Mutex(Mutex *ignored) {}
+  // Disallow "evil" constructors
+  Mutex(const Mutex&);
+  void operator=(const Mutex&);
+};
+
+// Now the implementation of Mutex for various systems
+#if defined(NO_THREADS)
+
+// When we don't have threads, we can be either reading or writing,
+// but not both.  We can have lots of readers at once (in no-threads
+// mode, that's most likely to happen in recursive function calls),
+// but only one writer.  We represent this by having mutex_ be -1 when
+// writing and a number > 0 when reading (and 0 when no lock is held).
+//
+// In debug mode, we assert these invariants, while in non-debug mode
+// we do nothing, for efficiency.  That's why everything is in an
+// assert.
+#include <assert.h>
+
+Mutex::Mutex() : mutex_(0) { }
+Mutex::~Mutex()            { assert(mutex_ == 0); }
+void Mutex::Lock()         { assert(--mutex_ == -1); }
+void Mutex::Unlock()       { assert(mutex_++ == -1); }
+#ifdef GMUTEX_TRYLOCK
+bool Mutex::TryLock()      { if (mutex_) return false; Lock(); return true; }
+#endif
+void Mutex::ReaderLock()   { assert(++mutex_ > 0); }
+void Mutex::ReaderUnlock() { assert(mutex_-- > 0); }
+
+#elif defined(HAVE_PTHREAD) && defined(HAVE_RWLOCK)
+
+#include <stdlib.h>      // for abort()
+#define SAFE_PTHREAD(fncall)  do { if ((fncall) != 0) abort(); } while (0)
+
+Mutex::Mutex()             { SAFE_PTHREAD(pthread_rwlock_init(&mutex_, NULL)); }
+Mutex::~Mutex()            { SAFE_PTHREAD(pthread_rwlock_destroy(&mutex_)); }
+void Mutex::Lock()         { SAFE_PTHREAD(pthread_rwlock_wrlock(&mutex_)); }
+void Mutex::Unlock()       { SAFE_PTHREAD(pthread_rwlock_unlock(&mutex_)); }
+#ifdef GMUTEX_TRYLOCK
+bool Mutex::TryLock()      { return pthread_rwlock_trywrlock(&mutex_) == 0; }
+#endif
+void Mutex::ReaderLock()   { SAFE_PTHREAD(pthread_rwlock_rdlock(&mutex_)); }
+void Mutex::ReaderUnlock() { SAFE_PTHREAD(pthread_rwlock_unlock(&mutex_)); }
+#undef SAFE_PTHREAD
+
+#elif defined(HAVE_PTHREAD)
+
+#include <stdlib.h>      // for abort()
+#define SAFE_PTHREAD(fncall)  do { if ((fncall) != 0) abort(); } while (0)
+
+Mutex::Mutex()             { SAFE_PTHREAD(pthread_mutex_init(&mutex_, NULL)); }
+Mutex::~Mutex()            { SAFE_PTHREAD(pthread_mutex_destroy(&mutex_)); }
+void Mutex::Lock()         { SAFE_PTHREAD(pthread_mutex_lock(&mutex_)); }
+void Mutex::Unlock()       { SAFE_PTHREAD(pthread_mutex_unlock(&mutex_)); }
+#ifdef GMUTEX_TRYLOCK
+bool Mutex::TryLock()      { return pthread_mutex_trylock(&mutex_) == 0; }
+#endif
+void Mutex::ReaderLock()   { Lock(); }      // we don't have read-write locks
+void Mutex::ReaderUnlock() { Unlock(); }
+#undef SAFE_PTHREAD
+
+#elif defined(WIN32)
+
+Mutex::Mutex()             { InitializeCriticalSection(&mutex_); }
+Mutex::~Mutex()            { DeleteCriticalSection(&mutex_); }
+void Mutex::Lock()         { EnterCriticalSection(&mutex_); }
+void Mutex::Unlock()       { LeaveCriticalSection(&mutex_); }
+#ifdef GMUTEX_TRYLOCK
+bool Mutex::TryLock()      { return TryEnterCriticalSection(&mutex_) != 0; }
+#endif
+void Mutex::ReaderLock()   { Lock(); }      // we don't have read-write locks
+void Mutex::ReaderUnlock() { Unlock(); }
+
+#endif
+
+
+// --------------------------------------------------------------------------
+// Some helper classes
+
+// MutexLock(mu) acquires mu when constructed and releases it when destroyed.
+class MutexLock {
+ public:
+  explicit MutexLock(Mutex *mu) : mu_(mu) { mu_->Lock(); }
+  ~MutexLock() { mu_->Unlock(); }
+ private:
+  Mutex * const mu_;
+  // Disallow "evil" constructors
+  MutexLock(const MutexLock&);
+  void operator=(const MutexLock&);
+};
+
+// ReaderMutexLock and WriterMutexLock do the same, for rwlocks
+class ReaderMutexLock {
+ public:
+  explicit ReaderMutexLock(Mutex *mu) : mu_(mu) { mu_->ReaderLock(); }
+  ~ReaderMutexLock() { mu_->ReaderUnlock(); }
+ private:
+  Mutex * const mu_;
+  // Disallow "evil" constructors
+  ReaderMutexLock(const ReaderMutexLock&);
+  void operator=(const ReaderMutexLock&);
+};
+
+class WriterMutexLock {
+ public:
+  explicit WriterMutexLock(Mutex *mu) : mu_(mu) { mu_->WriterLock(); }
+  ~WriterMutexLock() { mu_->WriterUnlock(); }
+ private:
+  Mutex * const mu_;
+  // Disallow "evil" constructors
+  WriterMutexLock(const WriterMutexLock&);
+  void operator=(const WriterMutexLock&);
+};
+
+// Catch bug where variable name is omitted, e.g. MutexLock (&mu);
+#define MutexLock(x) COMPILE_ASSERT(0, mutex_lock_decl_missing_var_name)
+#define ReaderMutexLock(x) COMPILE_ASSERT(0, rmutex_lock_decl_missing_var_name)
+#define WriterMutexLock(x) COMPILE_ASSERT(0, wmutex_lock_decl_missing_var_name)
+
+#endif  /* #define GOOGLE_MUTEX_H__ */
diff --git a/src/config.h.in b/src/config.h.in
new file mode 100644
index 0000000..fe27e72
--- /dev/null
+++ b/src/config.h.in
@@ -0,0 +1,104 @@
+/* src/config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Namespace for Google classes */
+#undef GOOGLE_NAMESPACE
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <execinfo.h> header file. */
+#undef HAVE_EXECINFO_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* define if you have google gflags library */
+#undef HAVE_LIB_GFLAGS
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* define if the compiler implements namespaces */
+#undef HAVE_NAMESPACES
+
+/* Define if you have POSIX threads libraries and header files. */
+#undef HAVE_PTHREAD
+
+/* define if the compiler implements pthread_rwlock_* */
+#undef HAVE_RWLOCK
+
+/* Define if you have the `sigaltstack' function */
+#undef HAVE_SIGALTSTACK
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <syscall.h> header file. */
+#undef HAVE_SYSCALL_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/syscall.h> header file. */
+#undef HAVE_SYS_SYSCALL_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* define if your compiler has __attribute__ */
+#undef HAVE___ATTRIBUTE__
+
+/* define if your compiler has __builtin_expect */
+#undef HAVE___BUILTIN_EXPECT
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to necessary symbol if this constant uses a non-standard name on
+   your system. */
+#undef PTHREAD_CREATE_JOINABLE
+
+/* The size of a `void *', as computed by sizeof. */
+#undef SIZEOF_VOID_P
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* the namespace where STL code like vector<> is defined */
+#undef STL_NAMESPACE
+
+/* Version number of package */
+#undef VERSION
+
+/* Stops putting the code inside the Google namespace */
+#undef _END_GOOGLE_NAMESPACE_
+
+/* Puts following code inside the Google namespace */
+#undef _START_GOOGLE_NAMESPACE_
diff --git a/src/demangle.cc b/src/demangle.cc
new file mode 100644
index 0000000..855bcd0
--- /dev/null
+++ b/src/demangle.cc
@@ -0,0 +1,1203 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Satoru Takabayashi
+
+#include <stdio.h>  // for NULL
+#include "demangle.h"
+
+_START_GOOGLE_NAMESPACE_
+
+typedef struct {
+  const char *abbrev;
+  const char *real_name;
+} AbbrevPair;
+
+// List of operators from Itanium C++ ABI.
+static const AbbrevPair kOperatorList[] = {
+  { "nw", "new" },
+  { "na", "new[]" },
+  { "dl", "delete" },
+  { "da", "delete[]" },
+  { "ps", "+" },
+  { "ng", "-" },
+  { "ad", "&" },
+  { "de", "*" },
+  { "co", "~" },
+  { "pl", "+" },
+  { "mi", "-" },
+  { "ml", "*" },
+  { "dv", "/" },
+  { "rm", "%" },
+  { "an", "&" },
+  { "or", "|" },
+  { "eo", "^" },
+  { "aS", "=" },
+  { "pL", "+=" },
+  { "mI", "-=" },
+  { "mL", "*=" },
+  { "dV", "/=" },
+  { "rM", "%=" },
+  { "aN", "&=" },
+  { "oR", "|=" },
+  { "eO", "^=" },
+  { "ls", "<<" },
+  { "rs", ">>" },
+  { "lS", "<<=" },
+  { "rS", ">>=" },
+  { "eq", "==" },
+  { "ne", "!=" },
+  { "lt", "<" },
+  { "gt", ">" },
+  { "le", "<=" },
+  { "ge", ">=" },
+  { "nt", "!" },
+  { "aa", "&&" },
+  { "oo", "||" },
+  { "pp", "++" },
+  { "mm", "--" },
+  { "cm", "," },
+  { "pm", "->*" },
+  { "pt", "->" },
+  { "cl", "()" },
+  { "ix", "[]" },
+  { "qu", "?" },
+  { "st", "sizeof" },
+  { "sz", "sizeof" },
+  { NULL, NULL },
+};
+
+// List of builtin types from Itanium C++ ABI.
+static const AbbrevPair kBuiltinTypeList[] = {
+  { "v", "void" },
+  { "w", "wchar_t" },
+  { "b", "bool" },
+  { "c", "char" },
+  { "a", "signed char" },
+  { "h", "unsigned char" },
+  { "s", "short" },
+  { "t", "unsigned short" },
+  { "i", "int" },
+  { "j", "unsigned int" },
+  { "l", "long" },
+  { "m", "unsigned long" },
+  { "x", "long long" },
+  { "y", "unsigned long long" },
+  { "n", "__int128" },
+  { "o", "unsigned __int128" },
+  { "f", "float" },
+  { "d", "double" },
+  { "e", "long double" },
+  { "g", "__float128" },
+  { "z", "ellipsis" },
+  { NULL, NULL }
+};
+
+// List of substitutions Itanium C++ ABI.
+static const AbbrevPair kSubstitutionList[] = {
+  { "St", "" },
+  { "Sa", "allocator" },
+  { "Sb", "basic_string" },
+  // std::basic_string<char, std::char_traits<char>,std::allocator<char> >
+  { "Ss", "string"},
+  // std::basic_istream<char, std::char_traits<char> >
+  { "Si", "istream" },
+  // std::basic_ostream<char, std::char_traits<char> >
+  { "So", "ostream" },
+  // std::basic_iostream<char, std::char_traits<char> >
+  { "Sd", "iostream" },
+  { NULL, NULL }
+};
+
+// State needed for demangling.
+typedef struct {
+  const char *mangled_cur;  // Cursor of mangled name.
+  const char *mangled_end;  // End of mangled name.
+  char *out_cur;            // Cursor of output string.
+  const char *out_begin;    // Beginning of output string.
+  const char *out_end;      // End of output string.
+  const char *prev_name;    // For constructors/destructors.
+  int prev_name_length;     // For constructors/destructors.
+  int nest_level;           // For nested names.
+  int number;               // Remember the previous number.
+  bool append;              // Append flag.
+  bool overflowed;          // True if output gets overflowed.
+} State;
+
+// We don't use strlen() in libc since it's not guaranteed to be async
+// signal safe.
+static size_t StrLen(const char *str) {
+  size_t len = 0;
+  while (*str != '\0') {
+    ++str;
+    ++len;
+  }
+  return len;
+}
+
+// Returns true if "str" has "prefix" as a prefix.
+static bool StrPrefix(const char *str, const char *prefix) {
+  size_t i = 0;
+  while (str[i] != '\0' && prefix[i] != '\0' &&
+         str[i] == prefix[i]) {
+    ++i;
+  }
+  return prefix[i] == '\0';  // Consumed everything in "prefix".
+}
+
+static void InitState(State *state, const char *mangled,
+                      char *out, int out_size) {
+  state->mangled_cur = mangled;
+  state->mangled_end = mangled + StrLen(mangled);
+  state->out_cur = out;
+  state->out_begin = out;
+  state->out_end = out + out_size;
+  state->prev_name  = NULL;
+  state->prev_name_length = -1;
+  state->nest_level = -1;
+  state->number = -1;
+  state->append = true;
+  state->overflowed = false;
+}
+
+// Calculates the remaining length of the mangled name.
+static int RemainingLength(State *state) {
+  return state->mangled_end - state->mangled_cur;
+}
+
+// Returns true and advances "mangled_cur" if we find "c" at
+// "mangled_cur" position.
+static bool ParseChar(State *state, const char c) {
+  if (RemainingLength(state) >= 1 && *state->mangled_cur == c) {
+    ++state->mangled_cur;
+    return true;
+  }
+  return false;
+}
+
+// Returns true and advances "mangled_cur" if we find "two_chars" at
+// "mangled_cur" position.
+static bool ParseTwoChar(State *state, const char *two_chars) {
+  if (RemainingLength(state) >= 2 &&
+      state->mangled_cur[0] == two_chars[0] &&
+      state->mangled_cur[1] == two_chars[1]) {
+    state->mangled_cur += 2;
+    return true;
+  }
+  return false;
+}
+
+// Returns true and advances "mangled_cur" if we find any character in
+// "char_class" at "mangled_cur" position.
+static bool ParseCharClass(State *state, const char *char_class) {
+  if (state->mangled_cur == state->mangled_end) {
+    return false;
+  }
+  const char *p = char_class;
+  for (; *p != '\0'; ++p) {
+    if (*state->mangled_cur == *p) {
+      state->mangled_cur += 1;
+      return true;
+    }
+  }
+  return false;
+}
+
+// This function is used for handling an optional non-terminal.
+static bool Optional(bool status) {
+  return true;
+}
+
+// This function is used for handling <non-terminal>+ syntax.
+typedef bool (*ParseFunc)(State *);
+static bool OneOrMore(ParseFunc parse_func, State *state) {
+  if (parse_func(state)) {
+    while (parse_func(state)) {
+    }
+    return true;
+  }
+  return false;
+}
+
+// Append "str" at "out_cur".  If there is an overflow, "overflowed"
+// is set to true for later use.  The output string is ensured to
+// always terminate with '\0' as long as there is no overflow.
+static void Append(State *state, const char * const str, const int length) {
+  int i;
+  for (i = 0; i < length; ++i) {
+    if (state->out_cur + 1 < state->out_end) {  // +1 for '\0'
+      *state->out_cur = str[i];
+      ++state->out_cur;
+    } else {
+      state->overflowed = true;
+      break;
+    }
+  }
+  if (!state->overflowed) {
+    *state->out_cur = '\0';  // Terminate it with '\0'
+  }
+}
+
+// We don't use equivalents in libc to avoid locale issues.
+static bool IsLower(char c) {
+  return c >= 'a' && c <= 'z';
+}
+
+static bool IsAlpha(char c) {
+  return ((c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z'));
+}
+
+// Append "str" with some tweaks, iff "append" state is true.
+// Returns true so that it can be placed in "if" conditions.
+static void MaybeAppendWithLength(State *state, const char * const str,
+                                  const int length) {
+  if (state->append && length > 0) {
+    // Append a space if the output buffer ends with '<' and "str"
+    // starts with '<' to avoid <<<.
+    if (str[0] == '<' && state->out_begin < state->out_cur  &&
+        state->out_cur[-1] == '<') {
+      Append(state, " ", 1);
+    }
+    // Remember the last identifier name for ctors/dtors.
+    if (IsAlpha(str[0]) || str[0] == '_') {
+      state->prev_name = state->out_cur;
+      state->prev_name_length = length;
+    }
+    Append(state, str, length);
+  }
+}
+
+// A convenient wrapper arount MaybeAppendWithLength().
+static bool MaybeAppend(State *state, const char * const str) {
+  if (state->append) {
+    int length = StrLen(str);
+    MaybeAppendWithLength(state, str, length);
+  }
+  return true;
+}
+
+// This function is used for handling nested names.
+static bool EnterNestedName(State *state) {
+  state->nest_level = 0;
+  return true;
+}
+
+// This function is used for handling nested names.
+static bool LeaveNestedName(State *state, int prev_value) {
+  state->nest_level = prev_value;
+  return true;
+}
+
+// Disable the append mode not to print function parameters, etc.
+static bool DisableAppend(State *state) {
+  state->append = false;
+  return true;
+}
+
+// Restore the append mode to the previous state.
+static bool RestoreAppend(State *state, bool prev_value) {
+  state->append = prev_value;
+  return true;
+}
+
+// Increase the nest level for nested names.
+static void MaybeIncreaseNestLevel(State *state) {
+  if (state->nest_level > -1) {
+    ++state->nest_level;
+  }
+}
+
+// Appends :: for nested names if necessary.
+static void MaybeAppendSeparator(State *state) {
+  if (state->nest_level >= 1) {
+    MaybeAppend(state, "::");
+  }
+}
+
+// Cancel the last separator if necessary.
+static void MaybeCancelLastSeparator(State *state) {
+  if (state->nest_level >= 1 && state->append &&
+      state->out_begin <= state->out_cur - 2) {
+    state->out_cur -= 2;
+    *state->out_cur = '\0';
+  }
+}
+
+// Returns true if identifier pointed by "mangled_cur" is anonymous
+// namespace.
+static bool IdentifierIsAnonymousNamespace(State *state) {
+  const char anon_prefix[] = "_GLOBAL__N_";
+  return (state->number > sizeof(anon_prefix) - 1 &&  // Should be longer.
+          StrPrefix(state->mangled_cur, anon_prefix));
+}
+
+// Forward declarations of our parsing functions.
+static bool ParseMangledName(State *state);
+static bool ParseEncoding(State *state);
+static bool ParseName(State *state);
+static bool ParseUnscopedName(State *state);
+static bool ParseUnscopedTemplateName(State *state);
+static bool ParseNestedName(State *state);
+static bool ParsePrefix(State *state);
+static bool ParseUnqualifiedName(State *state);
+static bool ParseSourceName(State *state);
+static bool ParseLocalSourceName(State *state);
+static bool ParseNumber(State *state);
+static bool ParseFloatNumber(State *state);
+static bool ParseSeqId(State *state);
+static bool ParseIdentifier(State *state);
+static bool ParseOperatorName(State *state);
+static bool ParseSpecialName(State *state);
+static bool ParseCallOffset(State *state);
+static bool ParseNVOffset(State *state);
+static bool ParseVOffset(State *state);
+static bool ParseCtorDtorName(State *state);
+static bool ParseType(State *state);
+static bool ParseCVQualifiers(State *state);
+static bool ParseBuiltinType(State *state);
+static bool ParseFunctionType(State *state);
+static bool ParseBareFunctionType(State *state);
+static bool ParseClassEnumType(State *state);
+static bool ParseArrayType(State *state);
+static bool ParsePointerToMemberType(State *state);
+static bool ParseTemplateParam(State *state);
+static bool ParseTemplateTemplateParam(State *state);
+static bool ParseTemplateArgs(State *state);
+static bool ParseTemplateArg(State *state);
+static bool ParseExpression(State *state);
+static bool ParseExprPrimary(State *state);
+static bool ParseLocalName(State *state);
+static bool ParseDiscriminator(State *state);
+static bool ParseSubstitution(State *state);
+
+// Implementation note: the following code is a straightforward
+// translation of the Itanium C++ ABI defined in BNF with a couple of
+// exceptions.
+//
+// - Support GNU extensions not defined in the Itanium C++ ABI
+// - <prefix> and <template-prefix> are combined to avoid infinite loop
+// - Reorder patterns to shorten the code
+// - Reorder patterns to give greedier functions precedence
+//   We'll mark "Less greedy than" for these cases in the code
+//
+// Each parsing function changes the state and returns true on
+// success.  Otherwise, don't change the state and returns false.  To
+// ensure that the state isn't changed in the latter case, we save the
+// original state before we call more than one parsing functions
+// consecutively with &&, and restore the state if unsuccessful.  See
+// ParseEncoding() as an example of this convention.  We follow the
+// convention throughout the code.
+//
+// Originally we tried to do demangling without following the full ABI
+// syntax but it turned out we needed to follow the full syntax to
+// parse complicated cases like nested template arguments.  Note that
+// implementing a full-fledged demangler isn't trivial (libiberty's
+// cp-demangle.c has +4300 lines).
+//
+// Note that (foo) in <(foo) ...> is a modifier to be ignored.
+//
+// Reference:
+// - Itanium C++ ABI
+//   <http://www.codesourcery.com/cxx-abi/abi.html#mangling>
+
+// <mangled-name> ::= _Z <encoding>
+static bool ParseMangledName(State *state) {
+  if (ParseTwoChar(state, "_Z") && ParseEncoding(state)) {
+    // Append trailing version suffix if any.
+    // ex. _Z3foo@@GLIBCXX_3.4
+    if (state->mangled_cur < state->mangled_end &&
+        state->mangled_cur[0] == '@') {
+      MaybeAppend(state, state->mangled_cur);
+      state->mangled_cur = state->mangled_end;
+    }
+    return true;
+  }
+  return false;
+}
+
+// <encoding> ::= <(function) name> <bare-function-type>
+//            ::= <(data) name>
+//            ::= <special-name>
+static bool ParseEncoding(State *state) {
+  State copy = *state;
+  if (ParseName(state) && ParseBareFunctionType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseName(state) || ParseSpecialName(state)) {
+    return true;
+  }
+  return false;
+}
+
+// <name> ::= <nested-name>
+//        ::= <unscoped-template-name> <template-args>
+//        ::= <unscoped-name>
+//        ::= <local-name>
+static bool ParseName(State *state) {
+  if (ParseNestedName(state) || ParseLocalName(state)) {
+    return true;
+  }
+
+  State copy = *state;
+  if (ParseUnscopedTemplateName(state) &&
+      ParseTemplateArgs(state)) {
+    return true;
+  }
+  *state = copy;
+
+  // Less greedy than <unscoped-template-name> <template-args>.
+  if (ParseUnscopedName(state)) {
+    return true;
+  }
+  return false;
+}
+
+// <unscoped-name> ::= <unqualified-name>
+//                 ::= St <unqualified-name>
+static bool ParseUnscopedName(State *state) {
+  if (ParseUnqualifiedName(state)) {
+    return true;
+  }
+
+  State copy = *state;
+  if (ParseTwoChar(state, "St") &&
+      MaybeAppend(state, "std::") &&
+      ParseUnqualifiedName(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <unscoped-template-name> ::= <unscoped-name>
+//                          ::= <substitution>
+static bool ParseUnscopedTemplateName(State *state) {
+  return ParseUnscopedName(state) || ParseSubstitution(state);
+}
+
+// <nested-name> ::= N [<CV-qualifiers>] <prefix> <unqualified-name> E
+//               ::= N [<CV-qualifiers>] <template-prefix> <template-args> E
+static bool ParseNestedName(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'N') &&
+      EnterNestedName(state) &&
+      Optional(ParseCVQualifiers(state)) &&
+      ParsePrefix(state) &&
+      LeaveNestedName(state, copy.nest_level) &&
+      ParseChar(state, 'E')) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// This part is tricky.  If we literally translate them to code, we'll
+// end up infinite loop.  Hence we merge them to avoid the case.
+//
+// <prefix> ::= <prefix> <unqualified-name>
+//          ::= <template-prefix> <template-args>
+//          ::= <template-param>
+//          ::= <substitution>
+//          ::= # empty
+// <template-prefix> ::= <prefix> <(template) unqualified-name>
+//                   ::= <template-param>
+//                   ::= <substitution>
+static bool ParsePrefix(State *state) {
+  bool has_something = false;
+  while (true) {
+    MaybeAppendSeparator(state);
+    if (ParseTemplateParam(state) ||
+        ParseSubstitution(state) ||
+        ParseUnscopedName(state)) {
+      has_something = true;
+      MaybeIncreaseNestLevel(state);
+      continue;
+    }
+    MaybeCancelLastSeparator(state);
+    if (has_something && ParseTemplateArgs(state)) {
+      return ParsePrefix(state);
+    } else {
+      break;
+    }
+  }
+  return true;
+}
+
+// <unqualified-name> ::= <operator-name>
+//                    ::= <ctor-dtor-name>
+//                    ::= <source-name>
+//                    ::= <local-source-name>
+static bool ParseUnqualifiedName(State *state) {
+  return (ParseOperatorName(state) ||
+          ParseCtorDtorName(state) ||
+          ParseSourceName(state) ||
+          ParseLocalSourceName(state));
+}
+
+// <source-name> ::= <positive length number> <identifier>
+static bool ParseSourceName(State *state) {
+  State copy = *state;
+  if (ParseNumber(state) && ParseIdentifier(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <local-source-name> ::= L <source-name> [<discriminator>]
+//
+// References:
+//   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=31775
+//   http://gcc.gnu.org/viewcvs?view=rev&revision=124467
+static bool ParseLocalSourceName(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'L') && ParseSourceName(state) &&
+      Optional(ParseDiscriminator(state))) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <number> ::= [n] <non-negative decimal integer>
+static bool ParseNumber(State *state) {
+  int sign = 1;
+  if (ParseChar(state, 'n')) {
+    sign = -1;
+  }
+  const char *p = state->mangled_cur;
+  int number = 0;
+  for (;p < state->mangled_end; ++p) {
+    if ((*p >= '0' && *p <= '9')) {
+      number = number * 10 + (*p - '0');
+    } else {
+      break;
+    }
+  }
+  if (p != state->mangled_cur) {  // Conversion succeeded.
+    state->mangled_cur = p;
+    state->number = number * sign;
+    return true;
+  }
+  return false;
+}
+
+// Floating-point literals are encoded using a fixed-length lowercase
+// hexadecimal string.
+static bool ParseFloatNumber(State *state) {
+  const char *p = state->mangled_cur;
+  int number = 0;
+  for (;p < state->mangled_end; ++p) {
+    if ((*p >= '0' && *p <= '9')) {
+      number = number * 16 + (*p - '0');
+    } else if (*p >= 'a' && *p <= 'f') {
+      number = number * 16 + (*p - 'a' + 10);
+    } else {
+      break;
+    }
+  }
+  if (p != state->mangled_cur) {  // Conversion succeeded.
+    state->mangled_cur = p;
+    state->number = number;
+    return true;
+  }
+  return false;
+}
+
+// The <seq-id> is a sequence number in base 36,
+// using digits and upper case letters
+static bool ParseSeqId(State *state) {
+  const char *p = state->mangled_cur;
+  int number = 0;
+  for (;p < state->mangled_end; ++p) {
+    if ((*p >= '0' && *p <= '9')) {
+      number = number * 36 + (*p - '0');
+    } else if (*p >= 'A' && *p <= 'Z') {
+      number = number * 36 + (*p - 'A' + 10);
+    } else {
+      break;
+    }
+  }
+  if (p != state->mangled_cur) {  // Conversion succeeded.
+    state->mangled_cur = p;
+    state->number = number;
+    return true;
+  }
+  return false;
+}
+
+// <identifier> ::= <unqualified source code identifier>
+static bool ParseIdentifier(State *state) {
+  if (state->number == -1 ||
+      RemainingLength(state) < state->number) {
+    return false;
+  }
+  if (IdentifierIsAnonymousNamespace(state)) {
+    MaybeAppend(state, "(anonymous namespace)");
+  } else {
+    MaybeAppendWithLength(state, state->mangled_cur, state->number);
+  }
+  state->mangled_cur += state->number;
+  state->number = -1;  // Reset the number.
+  return true;
+}
+
+// <operator-name> ::= nw, and other two letters cases
+//                 ::= cv <type>  # (cast)
+//                 ::= v  <digit> <source-name> # vendor extended operator
+static bool ParseOperatorName(State *state) {
+  if (RemainingLength(state) < 2) {
+    return false;
+  }
+  // First check with "cv" (cast) case.
+  State copy = *state;
+  if (ParseTwoChar(state, "cv") &&
+      MaybeAppend(state, "operator ") &&
+      EnterNestedName(state) &&
+      ParseType(state) &&
+      LeaveNestedName(state, copy.nest_level)) {
+    return true;
+  }
+  *state = copy;
+
+  // Then vendor extended operators.
+  if (ParseChar(state, 'v') && ParseCharClass(state, "0123456789") &&
+      ParseSourceName(state)) {
+    return true;
+  }
+  *state = copy;
+
+  // Other operator names should start with a lower alphabet followed
+  // by a lower/upper alphabet.
+  if (!(IsLower(state->mangled_cur[0]) &&
+        IsAlpha(state->mangled_cur[1]))) {
+    return false;
+  }
+  // We may want to perform a binary search if we really need speed.
+  const AbbrevPair *p;
+  for (p = kOperatorList; p->abbrev != NULL; ++p) {
+    if (state->mangled_cur[0] == p->abbrev[0] &&
+        state->mangled_cur[1] == p->abbrev[1]) {
+      MaybeAppend(state, "operator");
+      if (IsLower(*p->real_name)) {  // new, delete, etc.
+        MaybeAppend(state, " ");
+      }
+      MaybeAppend(state, p->real_name);
+      state->mangled_cur += 2;
+      return true;
+    }
+  }
+  return false;
+}
+
+// <special-name> ::= TV <type>
+//                ::= TT <type>
+//                ::= TI <type>
+//                ::= TS <type>
+//                ::= Tc <call-offset> <call-offset> <(base) encoding>
+//                ::= GV <(object) name>
+//                ::= T <call-offset> <(base) encoding>
+// G++ extensions:
+//                ::= TC <type> <(offset) number> _ <(base) type>
+//                ::= TF <type>
+//                ::= TJ <type>
+//                ::= GR <name>
+//                ::= GA <encoding>
+//                ::= Th <call-offset> <(base) encoding>
+//                ::= Tv <call-offset> <(base) encoding>
+//
+// Note: we don't care much about them since they don't appear in
+// stack traces.  The are special data.
+static bool ParseSpecialName(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'T') &&
+      ParseCharClass(state, "VTIS") &&
+      ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "Tc") && ParseCallOffset(state) &&
+      ParseCallOffset(state) && ParseEncoding(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "GV") &&
+      ParseName(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'T') && ParseCallOffset(state) &&
+      ParseEncoding(state)) {
+    return true;
+  }
+  *state = copy;
+
+  // G++ extensions
+  if (ParseTwoChar(state, "TC") && ParseType(state) &&
+      ParseNumber(state) && ParseChar(state, '_') &&
+      DisableAppend(state) &&
+      ParseType(state)) {
+    RestoreAppend(state, copy.append);
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'T') && ParseCharClass(state, "FJ") &&
+      ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "GR") && ParseName(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "GA") && ParseEncoding(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'T') && ParseCharClass(state, "hv") &&
+      ParseCallOffset(state) && ParseEncoding(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <call-offset> ::= h <nv-offset> _
+//               ::= v <v-offset> _
+static bool ParseCallOffset(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'h') &&
+      ParseNVOffset(state) && ParseChar(state, '_')) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'v') &&
+      ParseVOffset(state) && ParseChar(state, '_')) {
+    return true;
+  }
+  *state = copy;
+
+  return false;
+}
+
+// <nv-offset> ::= <(offset) number>
+static bool ParseNVOffset(State *state) {
+  return ParseNumber(state);
+}
+
+// <v-offset>  ::= <(offset) number> _ <(virtual offset) number>
+static bool ParseVOffset(State *state) {
+  State copy = *state;
+  if (ParseNumber(state) && ParseChar(state, '_') &&
+      ParseNumber(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <ctor-dtor-name> ::= C1 | C2 | C3
+//                  ::= D0 | D1 | D2
+static bool ParseCtorDtorName(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'C') &&
+      ParseCharClass(state, "123")) {
+    const char * const prev_name = state->prev_name;
+    const int prev_name_length = state->prev_name_length;
+    MaybeAppendWithLength(state, prev_name, prev_name_length);
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'D') &&
+      ParseCharClass(state, "012")) {
+    const char * const prev_name = state->prev_name;
+    const int prev_name_length = state->prev_name_length;
+    MaybeAppend(state, "~");
+    MaybeAppendWithLength(state, prev_name, prev_name_length);
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <type> ::= <CV-qualifiers> <type>
+//        ::= P <type>
+//        ::= R <type>
+//        ::= C <type>
+//        ::= G <type>
+//        ::= U <source-name> <type>
+//        ::= <builtin-type>
+//        ::= <function-type>
+//        ::= <class-enum-type>
+//        ::= <array-type>
+//        ::= <pointer-to-member-type>
+//        ::= <template-template-param> <template-args>
+//        ::= <template-param>
+//        ::= <substitution>
+static bool ParseType(State *state) {
+  // We should check CV-qualifers, and PRGC things first.
+  State copy = *state;
+  if (ParseCVQualifiers(state) && ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseCharClass(state, "PRCG") && ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'U') && ParseSourceName(state) &&
+      ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseBuiltinType(state) ||
+      ParseFunctionType(state) ||
+      ParseClassEnumType(state) ||
+      ParseArrayType(state) ||
+      ParsePointerToMemberType(state) ||
+      ParseSubstitution(state)) {
+    return true;
+  }
+
+  if (ParseTemplateTemplateParam(state) &&
+      ParseTemplateArgs(state)) {
+    return true;
+  }
+  *state = copy;
+
+  // Less greedy than <template-template-param> <template-args>.
+  if (ParseTemplateParam(state)) {
+    return true;
+  }
+
+  return false;
+}
+
+// <CV-qualifiers> ::= [r] [V] [K]
+// We don't allow empty <CV-qualifiers> to avoid infinite loop in
+// ParseType().
+static bool ParseCVQualifiers(State *state) {
+  int num_cv_qualifiers = 0;
+  num_cv_qualifiers += ParseChar(state, 'r');
+  num_cv_qualifiers += ParseChar(state, 'V');
+  num_cv_qualifiers += ParseChar(state, 'K');
+  return num_cv_qualifiers > 0;
+}
+
+// <builtin-type> ::= v, etc.
+//                ::= u <source-name>
+static bool ParseBuiltinType(State *state) {
+  const AbbrevPair *p;
+  for (p = kBuiltinTypeList; p->abbrev != NULL; ++p) {
+    if (state->mangled_cur[0] == p->abbrev[0]) {
+      MaybeAppend(state, p->real_name);
+      ++state->mangled_cur;
+      return true;
+    }
+  }
+
+  State copy = *state;
+  if (ParseChar(state, 'u') && ParseSourceName(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <function-type> ::= F [Y] <bare-function-type> E
+static bool ParseFunctionType(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'F') && Optional(ParseChar(state, 'Y')) &&
+      ParseBareFunctionType(state) && ParseChar(state, 'E')) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <bare-function-type> ::= <(signature) type>+
+static bool ParseBareFunctionType(State *state) {
+  State copy = *state;
+  DisableAppend(state);
+  if (OneOrMore(ParseType, state)) {
+    RestoreAppend(state, copy.append);
+    MaybeAppend(state, "()");
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <class-enum-type> ::= <name>
+static bool ParseClassEnumType(State *state) {
+  return ParseName(state);
+}
+
+// <array-type> ::= A <(positive dimension) number> _ <(element) type>
+//              ::= A [<(dimension) expression>] _ <(element) type>
+static bool ParseArrayType(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'A') && ParseNumber(state) &&
+      ParseChar(state, '_') && ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'A') && Optional(ParseExpression(state)) &&
+      ParseChar(state, '_') && ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <pointer-to-member-type> ::= M <(class) type> <(member) type>
+static bool ParsePointerToMemberType(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'M') && ParseType(state) &&
+      ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <template-param> ::= T_
+//                  ::= T <parameter-2 non-negative number> _
+static bool ParseTemplateParam(State *state) {
+  if (ParseTwoChar(state, "T_")) {
+    MaybeAppend(state, "?");  // We don't support template substitutions.
+    return true;
+  }
+
+  State copy = *state;
+  if (ParseChar(state, 'T') && ParseNumber(state) &&
+      ParseChar(state, '_')) {
+    MaybeAppend(state, "?");  // We don't support template substitutions.
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+
+// <template-template-param> ::= <template-param>
+//                           ::= <substitution>
+static bool ParseTemplateTemplateParam(State *state) {
+  return (ParseTemplateParam(state) ||
+          ParseSubstitution(state));
+}
+
+// <template-args> ::= I <template-arg>+ E
+static bool ParseTemplateArgs(State *state) {
+  State copy = *state;
+  DisableAppend(state);
+  if (ParseChar(state, 'I') &&
+      OneOrMore(ParseTemplateArg, state) &&
+      ParseChar(state, 'E')) {
+    RestoreAppend(state, copy.append);
+    MaybeAppend(state, "<>");
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <template-arg>  ::= <type>
+//                 ::= <expr-primary>
+//                 ::= X <expression> E
+static bool ParseTemplateArg(State *state) {
+  if (ParseType(state) ||
+      ParseExprPrimary(state)) {
+    return true;
+  }
+
+  State copy = *state;
+  if (ParseChar(state, 'X') && ParseExpression(state) &&
+      ParseChar(state, 'E')) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <expression> ::= <template-param>
+//              ::= <expr-primary>
+//              ::= <unary operator-name> <expression>
+//              ::= <binary operator-name> <expression> <expression>
+//              ::= <trinary operator-name> <expression> <expression>
+//                  <expression>
+//              ::= st <type>
+//              ::= sr <type> <unqualified-name> <template-args>
+//              ::= sr <type> <unqualified-name>
+static bool ParseExpression(State *state) {
+  if (ParseTemplateParam(state) || ParseExprPrimary(state)) {
+    return true;
+  }
+
+  State copy = *state;
+  if (ParseOperatorName(state) &&
+      ParseExpression(state) &&
+      ParseExpression(state) &&
+      ParseExpression(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseOperatorName(state) &&
+      ParseExpression(state) &&
+      ParseExpression(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseOperatorName(state) &&
+      ParseExpression(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "st") && ParseType(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "sr") && ParseType(state) &&
+      ParseUnqualifiedName(state) &&
+      ParseTemplateArgs(state)) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "sr") && ParseType(state) &&
+      ParseUnqualifiedName(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <expr-primary> ::= L <type> <(value) number> E
+//                ::= L <type> <(value) float> E
+//                ::= L <mangled-name> E
+//                // A bug in g++'s C++ ABI version 2 (-fabi-version=2).
+//                ::= LZ <encoding> E
+static bool ParseExprPrimary(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'L') && ParseType(state) &&
+      ParseNumber(state) &&
+      ParseChar(state, 'E')) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'L') && ParseType(state) &&
+      ParseFloatNumber(state) &&
+      ParseChar(state, 'E')) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'L') && ParseMangledName(state) &&
+      ParseChar(state, 'E')) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseTwoChar(state, "LZ") && ParseEncoding(state) &&
+      ParseChar(state, 'E')) {
+    return true;
+  }
+  *state = copy;
+
+  return false;
+}
+
+// <local-name> := Z <(function) encoding> E <(entity) name>
+//                 [<discriminator>]
+//              := Z <(function) encoding> E s [<discriminator>]
+static bool ParseLocalName(State *state) {
+  State copy = *state;
+  if (ParseChar(state, 'Z') && ParseEncoding(state) &&
+      ParseChar(state, 'E') && MaybeAppend(state, "::") &&
+      ParseName(state) && Optional(ParseDiscriminator(state))) {
+    return true;
+  }
+  *state = copy;
+
+  if (ParseChar(state, 'Z') && ParseEncoding(state) &&
+      ParseTwoChar(state, "Es") && Optional(ParseDiscriminator(state))) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <discriminator> := _ <(non-negative) number>
+static bool ParseDiscriminator(State *state) {
+  State copy = *state;
+  if (ParseChar(state, '_') && ParseNumber(state)) {
+    return true;
+  }
+  *state = copy;
+  return false;
+}
+
+// <substitution> ::= S_
+//                ::= S <seq-id> _
+//                ::= St, etc.
+static bool ParseSubstitution(State *state) {
+  if (ParseTwoChar(state, "S_")) {
+    MaybeAppend(state, "?");  // We don't support substitutions.
+    return true;
+  }
+
+  State copy = *state;
+  if (ParseChar(state, 'S') && ParseSeqId(state) &&
+      ParseChar(state, '_')) {
+    MaybeAppend(state, "?");  // We don't support substitutions.
+    return true;
+  }
+  *state = copy;
+
+  // Expand abbreviations like "St" => "std".
+  if (ParseChar(state, 'S')) {
+    const AbbrevPair *p;
+    for (p = kSubstitutionList; p->abbrev != NULL; ++p) {
+      if (state->mangled_cur[0] == p->abbrev[1]) {
+        MaybeAppend(state, "std");
+        if (p->real_name[0] != '\0') {
+          MaybeAppend(state, "::");
+          MaybeAppend(state, p->real_name);
+        }
+        state->mangled_cur += 1;
+        return true;
+      }
+    }
+  }
+  *state = copy;
+  return false;
+}
+
+// The demangler entry point.
+bool Demangle(const char *mangled, char *out, int out_size) {
+  State state;
+  InitState(&state, mangled, out, out_size);
+  return (ParseMangledName(&state) &&
+          state.overflowed == false &&
+          RemainingLength(&state) == 0);
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/demangle.h b/src/demangle.h
new file mode 100644
index 0000000..cddfb12
--- /dev/null
+++ b/src/demangle.h
@@ -0,0 +1,56 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Satoru Takabayashi
+//
+// An async-signal-safe and thread-safe demangler for Itanium C++ ABI
+// (aka G++ V3 ABI).
+
+// The demangler is implemented to be used in async signal handlers to
+// symbolize stack traces.  We cannot use libstdc++'s
+// abi::__cxa_demangle() in such signal handlers since it's not async
+// signal safe (it uses malloc() internally).
+//
+// Note that this demangler doesn't support full demangling.  More
+// specifically, it doesn't print types of function parameters and
+// types of template arguments.  It just skips them.  However, it's
+// still very useful to extract basic information such as class,
+// function, constructor, destructor, and operator names.
+//
+// See the implementation note in demangle.cc if you are interested.
+//
+// Example:
+//
+// | Mangled Name  | The Demangler | abi::__cxa_demangle()
+// |---------------|---------------|-----------------------
+// | _Z1fv         | f()           | f()
+// | _Z1fi         | f()           | f(int)
+// | _Z3foo3bar    | foo()         | foo(bar)
+// | _Z1fIiEvi     | f<>()         | void f<int>(int)
+// | _ZN1N1fE      | N::f          | N::f
+// | _ZN3Foo3BarEv | Foo::Bar()    | Foo::Bar()
+// | _Zrm1XS_"     | operator%()   | operator%(X, X)
+// | _ZN3FooC1Ev   | Foo::Foo()    | Foo::Foo()
+// | _Z1fSs        | f()           | f(std::basic_string<char,
+// |               |               |   std::char_traits<char>,
+// |               |               |   std::allocator<char> >)
+//
+// See the unit test for more examples.
+//
+// Note: we might want to write demanglers for ABIs other than Itanium
+// C++ ABI in the future.
+//
+
+#ifndef BASE_DEMANGLE_H_
+#define BASE_DEMANGLE_H_
+
+#include "config.h"
+
+_START_GOOGLE_NAMESPACE_
+
+// Demangle "mangled".  On success, return true and write the
+// demangled symbol name to "out".  Otherwise, return false.
+// "out" is modified even if demangling is unsuccessful.
+bool Demangle(const char *mangled, char *out, int out_size);
+
+_END_GOOGLE_NAMESPACE_
+
+#endif  // BASE_DEMANGLE_H_
diff --git a/src/demangle_unittest.cc b/src/demangle_unittest.cc
new file mode 100644
index 0000000..67acd24
--- /dev/null
+++ b/src/demangle_unittest.cc
@@ -0,0 +1,83 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Satoru Takabayashi
+//
+// Unit tests for functions in demangle.c.
+
+#include <iostream>
+#include <fstream>
+#include <string>
+#include "glog/logging.h"
+#include "demangle.h"
+#include "googletest.h"
+#include "config.h"
+
+DEFINE_bool(demangle_filter, false, "Run demangle_unittest in filter mode");
+
+using namespace std;
+using namespace GOOGLE_NAMESPACE;
+
+// A wrapper function for Demangle() to make the unit test simple.
+static const char *DemangleIt(const char * const mangled) {
+  static char demangled[4096];
+  if (Demangle(mangled, demangled, sizeof(demangled))) {
+    return demangled;
+  } else {
+    return mangled;
+  }
+}
+
+// Test corner cases of bounary conditions.
+TEST(Demangle, CornerCases) {
+  char tmp[10];
+  EXPECT_TRUE(Demangle("_Z6foobarv", tmp, sizeof(tmp)));
+  // sizeof("foobar()") == 9
+  EXPECT_STREQ("foobar()", tmp);
+  EXPECT_TRUE(Demangle("_Z6foobarv", tmp, 9));
+  EXPECT_STREQ("foobar()", tmp);
+  EXPECT_FALSE(Demangle("_Z6foobarv", tmp, 8));  // Not enough.
+  EXPECT_FALSE(Demangle("_Z6foobarv", tmp, 1));
+  EXPECT_FALSE(Demangle("_Z6foobarv", tmp, 0));
+  EXPECT_FALSE(Demangle("_Z6foobarv", NULL, 0));  // Should not cause SEGV.
+}
+
+TEST(Demangle, FromFile) {
+  string test_file = FLAGS_test_srcdir + "/src/demangle_unittest.txt";
+  ifstream f(test_file.c_str());  // The file should exist.
+  EXPECT_FALSE(f.fail());
+
+  string line;
+  while (getline(f, line)) {
+    // Lines start with '#' are considered as comments.
+    if (line.empty() || line[0] == '#') {
+      continue;
+    }
+    // Each line should contain a mangled name and a demangled name
+    // separated by '\t'.  Example: "_Z3foo\tfoo"
+    string::size_type tab_pos = line.find('\t');
+    EXPECT_NE(string::npos, tab_pos);
+    string mangled = line.substr(0, tab_pos);
+    string demangled = line.substr(tab_pos + 1);
+    EXPECT_EQ(demangled, DemangleIt(mangled.c_str()));
+  }
+}
+
+int main(int argc, char **argv) {
+#ifdef HAVE_LIB_GFLAGS
+  ParseCommandLineFlags(&argc, &argv, true);
+#endif
+  FLAGS_logtostderr = true;
+  InitGoogleLogging(argv[0]);
+  if (FLAGS_demangle_filter) {
+    // Read from cin and write to cout.
+    string line;
+    while (getline(cin, line, '\n')) {
+      cout << DemangleIt(line.c_str()) << endl;
+    }
+    return 0;
+  } else if (argc > 1) {
+    cout << DemangleIt(argv[1]) << endl;
+    return 0;
+  } else {
+    return RUN_ALL_TESTS();
+  }
+}
diff --git a/src/demangle_unittest.sh b/src/demangle_unittest.sh
new file mode 100755
index 0000000..00117a1
--- /dev/null
+++ b/src/demangle_unittest.sh
@@ -0,0 +1,63 @@
+#! /bin/sh
+# Copyright 2006 Google, Inc.  All Rights Reserved. 
+# Author: Satoru Takabayashi
+#
+# Unit tests for demangle.c with a real binary.
+
+set -e
+
+die () {
+    echo $1
+    exit 1
+}
+
+BINDIR=".libs"
+LIBGLOG="$BINDIR/libglog.so"
+
+DEMANGLER="$BINDIR/demangle_unittest"
+
+if test -e "$DEMANGLER"; then
+  # We need shared object.
+  export LD_LIBRARY_PATH=$BINDIR
+  export DYLD_LIBRARY_PATH=$BINDIR
+else
+  # For windows
+  DEMANGLER="./demangle_unittest.exe"
+  if ! test -e "$DEMANGLER"; then
+    echo "We coundn't find demangle_unittest binary."
+    exit 1
+  fi
+fi
+
+# Extract C++ mangled symbols from libbase.so.
+NM_OUTPUT="demangle.nm"
+nm "$LIBGLOG" | perl -nle 'print $1 if /\s(_Z\S+$)/' > "$NM_OUTPUT"
+
+# Check if mangled symbols exist. If there are none, we quit.
+# The binary is more likely compiled with GCC 2.95 or something old.
+if ! grep --quiet '^_Z' "$NM_OUTPUT"; then
+    echo "PASS"
+    exit 0
+fi
+
+# Demangle the symbols using our demangler.
+DM_OUTPUT="demangle.dm"
+GLOG_demangle_filter=1 "$DEMANGLER" --demangle_filter < "$NM_OUTPUT" > "$DM_OUTPUT"
+
+# Calculate the numbers of lines.
+NM_LINES=`wc -l "$NM_OUTPUT" | awk '{ print $1 }'`
+DM_LINES=`wc -l "$DM_OUTPUT" | awk '{ print $1 }'`
+
+# Compare the numbers of lines.  They must be the same.
+if test "$NM_LINES" != "$DM_LINES"; then
+    die "$NM_OUTPUT and $DM_OUTPUT don't have the same numbers of lines"
+fi
+
+# Check if mangled symbols exist.  They must not exist.
+if grep --quiet '^_Z' "$DM_OUTPUT"; then
+    die "Mangled symbols found in $DM_OUTPUT"
+fi
+
+# All C++ symbols are demangled successfully.
+echo "PASS"
+exit 0
diff --git a/src/demangle_unittest.txt b/src/demangle_unittest.txt
new file mode 100644
index 0000000..4e23c65
--- /dev/null
+++ b/src/demangle_unittest.txt
@@ -0,0 +1,137 @@
+# Test caces for demangle_unittest.  Each line consists of a
+# tab-separated pair of mangled and demangled symbol names.
+
+# Constructors and destructors.
+_ZN3FooC1Ev	Foo::Foo()
+_ZN3FooD1Ev	Foo::~Foo()
+_ZNSoD0Ev	std::ostream::~ostream()
+
+# G++ extensions.
+_ZTCN10LogMessage9LogStreamE0_So	LogMessage::LogStream
+_ZTv0_n12_N10LogMessage9LogStreamD0Ev	LogMessage::LogStream::~LogStream()
+_ZThn4_N7icu_3_410UnicodeSetD0Ev	icu_3_4::UnicodeSet::~UnicodeSet()
+
+# A bug in g++'s C++ ABI version 2 (-fabi-version=2).
+_ZN7NSSInfoI5groupjjXadL_Z10getgrgid_rEELZ19nss_getgrgid_r_nameEEC1Ei	NSSInfo<>::NSSInfo()
+
+# C linkage symbol names.  Should keep them untouched.
+main	main
+Demangle	Demangle
+_ZERO	_ZERO
+
+# Cast operator.
+_Zcviv	operator int()
+_ZN3foocviEv	foo::operator int()
+
+# Versioned symbols.
+_Z3Foo@GLIBCXX_3.4	Foo@GLIBCXX_3.4
+_Z3Foo@@GLIBCXX_3.4	Foo@@GLIBCXX_3.4
+
+# Abbreviations.
+_ZNSaE	std::allocator
+_ZNSbE	std::basic_string
+_ZNSdE	std::iostream
+_ZNSiE	std::istream
+_ZNSoE	std::ostream
+_ZNSsE	std::string
+
+# Substitutions.  We just replace them with ?.
+_ZN3fooS_E	foo::?
+_ZN3foo3barS0_E	foo::bar::?
+_ZNcvT_IiEEv	operator ?<>()
+
+# "<< <" case.
+_ZlsI3fooE	operator<< <>
+
+# Random things we found interesting.
+_ZN3FooISt6vectorISsSaISsEEEclEv	Foo<>::operator()()
+_ZTI9Callback1IiE	Callback1<>
+_ZN7icu_3_47UMemorynwEj	icu_3_4::UMemory::operator new()
+_ZNSt6vectorIbE9push_backE	std::vector<>::push_back
+_ZNSt6vectorIbSaIbEE9push_backEb	std::vector<>::push_back()
+_ZlsRSoRK15PRIVATE_Counter	operator<<()
+_ZSt6fill_nIPPN9__gnu_cxx15_Hashtable_nodeISt4pairIKPKcjEEEjS8_ET_SA_T0_RKT1_	std::fill_n<>()
+_ZZ3FoovE3Bar	Foo()::Bar
+_ZGVZ7UpTimervE8up_timer	UpTimer()::up_timer
+
+# Test cases from gcc-4.1.0/libstdc++-v3/testsuite/demangle.
+# Collected by:
+# % grep verify_demangle **/*.cc | perl -nle 'print $1 if /"(_Z.*?)"/' |
+#   sort | uniq
+#
+# Note that the following symbols are invalid.
+# That's why they are not demangled.
+# - _ZNZN1N1fEiE1X1gE
+# - _ZNZN1N1fEiE1X1gEv
+# - _Z1xINiEE
+_Z1fA37_iPS_	f()
+_Z1fAszL_ZZNK1N1A1fEvE3foo_0E_i	f()
+_Z1fI1APS0_PKS0_EvT_T0_T1_PA4_S3_M1CS8_	f<>()
+_Z1fI1XENT_1tES2_	f<>()
+_Z1fI1XEvPVN1AIT_E1TE	f<>()
+_Z1fILi1ELc120EEv1AIXplT_cviLd4028ae147ae147aeEEE	f<>()
+_Z1fILi1ELc120EEv1AIXplT_cviLf3f800000EEE	f<>()
+_Z1fILi5E1AEvN1CIXqugtT_Li0ELi1ELi2EEE1qE	f<>()
+_Z1fILi5E1AEvN1CIXstN1T1tEEXszsrS2_1tEE1qE	f<>()
+_Z1fILi5EEvN1AIXcvimlT_Li22EEE1qE	f<>()
+_Z1fIiEvi	f<>()
+_Z1fKPFiiE	f()
+_Z1fM1AFivEPS0_	f()
+_Z1fM1AKFivE	f()
+_Z1fM1AKFvvE	f()
+_Z1fPFPA1_ivE	f()
+_Z1fPFYPFiiEiE	f()
+_Z1fPFvvEM1SFvvE	f()
+_Z1fPKM1AFivE	f()
+_Z1fi	f()
+_Z1fv	f()
+_Z1jM1AFivEPS1_	j()
+_Z1rM1GFivEMS_KFivES_M1HFivES1_4whatIKS_E5what2IS8_ES3_	r()
+_Z1sPA37_iPS0_	s()
+_Z1xINiEE	_Z1xINiEE
+_Z3absILi11EEvv	abs<>()
+_Z3foo3bar	foo()
+_Z3foo5Hello5WorldS0_S_	foo()
+_Z3fooA30_A_i	foo()
+_Z3fooIA6_KiEvA9_KT_rVPrS4_	foo<>()
+_Z3fooILi2EEvRAplT_Li1E_i	foo<>()
+_Z3fooIiFvdEiEvv	foo<>()
+_Z3fooPM2ABi	foo()
+_Z3fooc	foo()
+_Z3fooiPiPS_PS0_PS1_PS2_PS3_PS4_PS5_PS6_PS7_PS8_PS9_PSA_PSB_PSC_	foo()
+_Z3kooPA28_A30_i	koo()
+_Z4makeI7FactoryiET_IT0_Ev	make<>()
+_Z5firstI3DuoEvS0_	first<>()
+_Z5firstI3DuoEvT_	first<>()
+_Z9hairyfuncM1YKFPVPFrPA2_PM1XKFKPA3_ilEPcEiE	hairyfunc()
+_ZGVN5libcw24_GLOBAL__N_cbll.cc0ZhUKa23compiler_bug_workaroundISt6vectorINS_13omanip_id_tctINS_5debug32memblk_types_manipulator_data_ctEEESaIS6_EEE3idsE	libcw::(anonymous namespace)::compiler_bug_workaround<>::ids
+_ZN12libcw_app_ct10add_optionIS_EEvMT_FvPKcES3_cS3_S3_	libcw_app_ct::add_option<>()
+_ZN1AIfEcvT_IiEEv	A<>::operator ?<>()
+_ZN1N1TIiiE2mfES0_IddE	N::T<>::mf()
+_ZN1N1fE	N::f
+_ZN1f1fE	f::f
+_ZN3FooIA4_iE3barE	Foo<>::bar
+_ZN5Arena5levelE	Arena::level
+_ZN5StackIiiE5levelE	Stack<>::level
+_ZN5libcw5debug13cwprint_usingINS_9_private_12GlobalObjectEEENS0_17cwprint_using_tctIT_EERKS5_MS5_KFvRSt7ostreamE	libcw::debug::cwprint_using<>()
+_ZN6System5Sound4beepEv	System::Sound::beep()
+_ZNKSt14priority_queueIP27timer_event_request_base_ctSt5dequeIS1_SaIS1_EE13timer_greaterE3topEv	std::priority_queue<>::top()
+_ZNKSt15_Deque_iteratorIP15memory_block_stRKS1_PS2_EeqERKS5_	std::_Deque_iterator<>::operator==()
+_ZNKSt17__normal_iteratorIPK6optionSt6vectorIS0_SaIS0_EEEmiERKS6_	std::__normal_iterator<>::operator-()
+_ZNSbIcSt11char_traitsIcEN5libcw5debug27no_alloc_checking_allocatorEE12_S_constructIPcEES6_T_S7_RKS3_	std::basic_string<>::_S_construct<>()
+_ZNSt13_Alloc_traitsISbIcSt18string_char_traitsIcEN5libcw5debug9_private_17allocator_adaptorIcSt24__default_alloc_templateILb0ELi327664EELb1EEEENS5_IS9_S7_Lb1EEEE15_S_instancelessE	std::_Alloc_traits<>::_S_instanceless
+_ZNSt3_In4wardE	std::_In::ward
+_ZNZN1N1fEiE1X1gE	_ZNZN1N1fEiE1X1gE
+_ZNZN1N1fEiE1X1gEv	_ZNZN1N1fEiE1X1gEv
+_ZSt1BISt1DIP1ARKS2_PS3_ES0_IS2_RS2_PS2_ES2_ET0_T_SB_SA_PT1_	std::B<>()
+_ZSt5state	std::state
+_ZTI7a_class	a_class
+_ZZN1N1fEiE1p	N::f()::p
+_ZZN1N1fEiEs	N::f()
+_ZlsRK1XS1_	operator<<()
+_ZlsRKU3fooU4bart1XS0_	operator<<()
+_ZlsRKU3fooU4bart1XS2_	operator<<()
+_ZlsRSoRKSs	operator<<()
+_ZngILi42EEvN1AIXplT_Li2EEE1TE	operator-<>()
+_ZplR1XS0_	operator+()
+_Zrm1XS_	operator%()
diff --git a/src/glog/log_severity.h b/src/glog/log_severity.h
new file mode 100644
index 0000000..11820a3
--- /dev/null
+++ b/src/glog/log_severity.h
@@ -0,0 +1,48 @@
+// Copyright 2007 Google Inc. All Rights Reserved.
+
+#ifndef BASE_LOG_SEVERITY_H__
+#define BASE_LOG_SEVERITY_H__
+
+// Variables of type LogSeverity are widely taken to lie in the range
+// [0, NUM_SEVERITIES-1].  Be careful to preserve this assumption if
+// you ever need to change their values or add a new severity.
+typedef int LogSeverity;
+
+const int INFO = 0, WARNING = 1, ERROR = 2, FATAL = 3, NUM_SEVERITIES = 4;
+
+// DFATAL is FATAL in debug mode, ERROR in normal mode
+#ifdef NDEBUG
+#define DFATAL_LEVEL ERROR
+#else
+#define DFATAL_LEVEL FATAL
+#endif
+
+extern const char* const LogSeverityNames[NUM_SEVERITIES];
+
+// NDEBUG usage helpers related to (RAW_)DCHECK:
+//
+// DEBUG_MODE is for small !NDEBUG uses like
+//   if (DEBUG_MODE) foo.CheckThatFoo();
+// instead of substantially more verbose
+//   #ifndef NDEBUG
+//     foo.CheckThatFoo();
+//   #endif
+//
+// IF_DEBUG_MODE is for small !NDEBUG uses like
+//   IF_DEBUG_MODE( string error; )
+//   DCHECK(Foo(&error)) << error;
+// instead of substantially more verbose
+//   #ifndef NDEBUG
+//     string error;
+//     DCHECK(Foo(&error)) << error;
+//   #endif
+//
+#ifdef NDEBUG
+enum { DEBUG_MODE = 0 };
+#define IF_DEBUG_MODE(x)
+#else
+enum { DEBUG_MODE = 1 };
+#define IF_DEBUG_MODE(x) x
+#endif
+
+#endif  // BASE_LOG_SEVERITY_H__
diff --git a/src/glog/logging.h.in b/src/glog/logging.h.in
new file mode 100644
index 0000000..3e74964
--- /dev/null
+++ b/src/glog/logging.h.in
@@ -0,0 +1,1289 @@
+//
+// Copyright (C) 1999 and onwards Google, Inc.
+//
+// Author: Ray Sidney
+//
+// This file contains #include information about logging-related stuff.
+// Pretty much everybody needs to #include this file so that they can
+// log various happenings.
+//
+#ifndef _LOGGING_H_
+#define _LOGGING_H_
+
+#include <errno.h>
+#include <string.h>
+#include <time.h>
+#include <string>
+#include <unistd.h>
+#ifdef __DEPRECATED
+// Make GCC quiet.
+# undef __DEPRECATED
+# include <strstream>
+# define __DEPRECATED
+#else
+# include <strstream>
+#endif
+#include <vector>
+
+// We care a lot about number of bits things take up.  Unfortunately,
+// systems define their bit-specific ints in a lot of different ways.
+// We use our own way, and have a typedef to get there.
+// Note: these commands below may look like "#if 1" or "#if 0", but
+// that's because they were constructed that way at ./configure time.
+// Look at logging.h.in to see how they're calculated (based on your config).
+#if @ac_cv_have_stdint_h@
+#include <stdint.h>             // the normal place uint16_t is defined
+#endif
+#if @ac_cv_have_systypes_h@
+#include <sys/types.h>          // the normal place u_int16_t is defined
+#endif
+#if @ac_cv_have_inttypes_h@
+#include <inttypes.h>           // a third place for uint16_t or u_int16_t
+#endif
+
+#if @ac_cv_have_libgflags@
+#include <gflags/gflags.h>
+#endif
+
+@ac_google_start_namespace@
+
+#if @ac_cv_have_uint16_t@      // the C99 format
+typedef int32_t int32;
+typedef uint32_t uint32;
+typedef int64_t int64;
+typedef uint64_t uint64;
+#elif @ac_cv_have_u_int16_t@   // the BSD format
+typedef int32_t int32;
+typedef u_int32_t uint32;
+typedef int64_t int64;
+typedef u_int64_t uint64;
+#elif @ac_cv_have___uint16@    // the windows (vc7) format
+typedef __int32 int32;
+typedef __uint32 uint32;
+typedef __int64 int64;
+typedef __uint64 uint64;
+#else
+#error Do not know how to define a 32-bit integer quantity on your system
+#endif
+
+@ac_google_end_namespace@
+
+// The global value of GOOGLE_STRIP_LOG. All the messages logged to
+// LOG(XXX) with severity less than GOOGLE_STRIP_LOG will not be displayed.
+// If it can be determined at compile time that the message will not be
+// printed, the statement will be compiled out.
+//
+// Example: to strip out all INFO and WARNING messages, use the value
+// of 2 below. To make an exception for WARNING messages from a single
+// file, add "#define GOOGLE_STRIP_LOG 1" to that file _before_ including
+// base/logging.h
+#ifndef GOOGLE_STRIP_LOG
+#define GOOGLE_STRIP_LOG 0
+#endif
+
+// GCC can be told that a certain branch is not likely to be taken (for
+// instance, a CHECK failure), and use that information in static analysis.
+// Giving it this information can help it optimize for the common case in
+// the absence of better information (ie. -fprofile-arcs).
+//
+#ifndef GOOGLE_PREDICT_BRANCH_NOT_TAKEN
+#if @ac_cv_have___builtin_expect@
+#define GOOGLE_PREDICT_BRANCH_NOT_TAKEN(x) (__builtin_expect(x, 0))
+#else
+#define GOOGLE_PREDICT_BRANCH_NOT_TAKEN(x) x
+#endif
+#endif
+
+// A macro to disallow the evil copy constructor and operator= functions
+// This should be used in the private: declarations for a class
+#define DISALLOW_EVIL_CONSTRUCTORS(TypeName)    \
+  TypeName(const TypeName&);                    \
+  void operator=(const TypeName&)
+
+// Make a bunch of macros for logging.  The way to log things is to stream
+// things to LOG(<a particular severity level>).  E.g.,
+//
+//   LOG(INFO) << "Found " << num_cookies << " cookies";
+//
+// You can capture log messages in a string, rather than reporting them
+// immediately:
+//
+//   vector<string> errors;
+//   LOG_STRING(ERROR, &errors) << "Couldn't parse cookie #" << cookie_num;
+//
+// This pushes back the new error onto 'errors'; if given a NULL pointer,
+// it reports the error via LOG(ERROR).
+//
+// You can also do conditional logging:
+//
+//   LOG_IF(INFO, num_cookies > 10) << "Got lots of cookies";
+//
+// You can also do occasional logging (log every n'th occurrence of an
+// event):
+//
+//   LOG_EVERY_N(INFO, 10) << "Got the " << COUNTER << "th cookie";
+//
+// The above will cause log messages to be output on the 1st, 11th, 21st, ...
+// times it is executed.  Note that the special COUNTER value is used to
+// identify which repetition is happening.
+//
+// You can also do occasional conditional logging (log every n'th
+// occurrence of an event, when condition is satisfied):
+//
+//   LOG_IF_EVERY_N(INFO, (size > 1024), 10) << "Got the " << COUNTER
+//                                           << "th big cookie";
+//
+// You can log messages the first N times your code executes a line. E.g.
+//
+//   LOG_FIRST_N(INFO, 20) << "Got the " << COUNTER << "th cookie";
+//
+// Outputs log messages for the first 20 times it is executed.
+//
+// Analogous SYSLOG, SYSLOG_IF, and SYSLOG_EVERY_N macros are available.
+// These log to syslog as well as to the normal logs.  If you use these at
+// all, you need to be aware that syslog can drastically reduce performance,
+// especially if it is configured for remote logging!  Don't use these
+// unless you fully understand this and have a concrete need to use them.
+// Even then, try to minimize your use of them.
+//
+// There are also "debug mode" logging macros like the ones above:
+//
+//   DLOG(INFO) << "Found cookies";
+//
+//   DLOG_IF(INFO, num_cookies > 10) << "Got lots of cookies";
+//
+//   DLOG_EVERY_N(INFO, 10) << "Got the " << COUNTER << "th cookie";
+//
+// All "debug mode" logging is compiled away to nothing for non-debug mode
+// compiles.
+//
+// We also have
+//
+//   LOG_ASSERT(assertion);
+//   DLOG_ASSERT(assertion);
+//
+// which is syntactic sugar for {,D}LOG_IF(FATAL, assert fails) << assertion;
+//
+// There are "verbose level" logging macros.  They look like
+//
+//   VLOG(1) << "I'm printed when you run the program with --v=1 or more";
+//   VLOG(2) << "I'm printed when you run the program with --v=2 or more";
+//
+// These always log at the INFO log level (when they log at all).
+// The verbose logging can also be turned on module-by-module.  For instance,
+//    --vmodule=mapreduce=2,file=1,gfs*=3 --v=0
+// will cause:
+//   a. VLOG(2) and lower messages to be printed from mapreduce.{h,cc}
+//   b. VLOG(1) and lower messages to be printed from file.{h,cc}
+//   c. VLOG(3) and lower messages to be printed from files prefixed with "gfs"
+//   d. VLOG(0) and lower messages to be printed from elsewhere
+//
+// The wildcarding functionality shown by (c) supports both '*' (match
+// 0 or more characters) and '?' (match any single character) wildcards.
+//
+// There's also VLOG_IS_ON(n) "verbose level" condition macro. To be used as
+//
+//   if (VLOG_IS_ON(2)) {
+//     // do some logging preparation and logging
+//     // that can't be accomplished with just VLOG(2) << ...;
+//   }
+//
+// There are also VLOG_IF, VLOG_EVERY_N and VLOG_IF_EVERY_N "verbose level"
+// condition macros for sample cases, when some extra computation and
+// preparation for logs is not needed.
+//   VLOG_IF(1, (size > 1024))
+//      << "I'm printed when size is more than 1024 and when you run the "
+//         "program with --v=1 or more";
+//   VLOG_EVERY_N(1, 10)
+//      << "I'm printed every 10th occurrence, and when you run the program "
+//         "with --v=1 or more. Present occurence is " << COUNTER;
+//   VLOG_IF_EVERY_N(1, (size > 1024), 10)
+//      << "I'm printed on every 10th occurence of case when size is more "
+//         " than 1024, when you run the program with --v=1 or more. ";
+//         "Present occurence is " << COUNTER;
+//
+// The supported severity levels for macros that allow you to specify one
+// are (in increasing order of severity) INFO, WARNING, ERROR, and FATAL.
+// Note that messages of a given severity are logged not only in the
+// logfile for that severity, but also in all logfiles of lower severity.
+// E.g., a message of severity FATAL will be logged to the logfiles of
+// severity FATAL, ERROR, WARNING, and INFO.
+//
+// There is also the special severity of DFATAL, which logs FATAL in
+// debug mode, ERROR in normal mode.
+//
+// Very important: logging a message at the FATAL severity level causes
+// the program to terminate (after the message is logged).
+//
+// Unless otherwise specified, logs will be written to the filename
+// "<program name>.<hostname>.<user name>.log.<severity level>.", followed
+// by the date, time, and pid (you can't prevent the date, time, and pid
+// from being in the filename).
+//
+// The logging code takes two flags:
+//     --v=#           set the verbose level
+//     --logtostderr   log all the messages to stderr instead of to logfiles
+
+#ifndef DECLARE_VARIABLE
+#define MUST_UNDEF_GFLAGS_DECLARE_MACROS
+#define DECLARE_VARIABLE(type, name, tn)                                      \
+  namespace FLAG__namespace_do_not_use_directly_use_DECLARE_##tn##_instead {  \
+  extern type FLAGS_##name;                                                   \
+  }                                                                           \
+  using FLAG__namespace_do_not_use_directly_use_DECLARE_##tn##_instead::FLAGS_##name
+
+// bool specialization
+#define DECLARE_bool(name) \
+  DECLARE_VARIABLE(bool, name, bool)
+
+// int32 specialization
+#define DECLARE_int32(name) \
+  DECLARE_VARIABLE(@ac_google_namespace@::int32, name, int32)
+
+// Special case for string, because we have to specify the namespace
+// std::string, which doesn't play nicely with our FLAG__namespace hackery.
+#define DECLARE_string(name)                                          \
+  namespace FLAG__namespace_do_not_use_directly_use_DECLARE_string_instead {  \
+  extern std::string FLAGS_##name;                                                   \
+  }                                                                           \
+  using FLAG__namespace_do_not_use_directly_use_DECLARE_string_instead::FLAGS_##name
+#endif
+
+// Set whether log messages go to stderr instead of logfiles
+DECLARE_bool(logtostderr);
+
+// Set how important a log message should be to avoid buffering
+DECLARE_int32(logbuflevel);
+
+// Log suppression level: messages logged at a lower level than this
+// are suppressed.
+DECLARE_int32(minloglevel);
+
+// If specified, logfiles are written into this directory instead of the
+// default logging directory.
+DECLARE_string(log_dir);
+
+DECLARE_int32(v);  // in vlog_is_on.cc
+
+DECLARE_int32(stderrthreshold);
+DECLARE_bool(alsologtostderr);
+
+#ifdef MUST_UNDEF_GFLAGS_DECLARE_MACROS
+#undef MUST_UNDEF_GFLAGS_DECLARE_MACROS
+#undef DECLARE_VARIABLE
+#undef DECLARE_bool
+#undef DECLARE_int32
+#undef DECLARE_string
+#endif
+
+// Log messages below the GOOGLE_STRIP_LOG level will be compiled away for
+// security reasons. See LOG(severtiy) below.
+
+// A few definitions of macros that don't generate much code.  Since
+// LOG(INFO) and its ilk are used all over our code, it's
+// better to have compact code for these operations.
+
+#if 0 >= GOOGLE_STRIP_LOG
+#define COMPACT_GOOGLE_LOG_INFO @ac_google_namespace@::LogMessage(__FILE__, __LINE__)
+#else
+#define COMPACT_GOOGLE_LOG_INFO @ac_google_namespace@::NullStream()
+#endif
+
+#if 1 >= GOOGLE_STRIP_LOG
+#define COMPACT_GOOGLE_LOG_WARNING @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::WARNING)
+#else
+#define COMPACT_GOOGLE_LOG_WARNING @ac_google_namespace@::NullStream()
+#endif
+
+#if 2 >= GOOGLE_STRIP_LOG
+#define COMPACT_GOOGLE_LOG_ERROR @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::ERROR)
+#else
+#define COMPACT_GOOGLE_LOG_ERROR @ac_google_namespace@::NullStream()
+#endif
+
+#if 3 >= GOOGLE_STRIP_LOG
+#define COMPACT_GOOGLE_LOG_FATAL @ac_google_namespace@::LogMessageFatal(__FILE__, __LINE__)
+#else
+#define COMPACT_GOOGLE_LOG_FATAL @ac_google_namespace@::NullStreamFatal()
+#endif
+
+// For DFATAL, we want to use LogMessage (as opposed to
+// LogMessageFatal), to be consistent with the original behavior.
+#ifdef NDEBUG
+#define COMPACT_GOOGLE_LOG_DFATAL COMPACT_GOOGLE_LOG_ERROR
+#elif 3 >= GOOGLE_STRIP_LOG
+#define COMPACT_GOOGLE_LOG_DFATAL @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::FATAL)
+#else
+#define COMPACT_GOOGLE_LOG_DFATAL @ac_google_namespace@::NullStreamFatal()
+#endif
+
+#define GOOGLE_LOG_INFO(counter) @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::INFO, counter, &@ac_google_namespace@::LogMessage::SendToLog)
+#define SYSLOG_INFO(counter) \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::INFO, counter, \
+  &@ac_google_namespace@::LogMessage::SendToSyslogAndLog)
+#define GOOGLE_LOG_WARNING(counter)  \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::WARNING, counter, \
+  &@ac_google_namespace@::LogMessage::SendToLog)
+#define SYSLOG_WARNING(counter)  \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::WARNING, counter, \
+  &@ac_google_namespace@::LogMessage::SendToSyslogAndLog)
+#define GOOGLE_LOG_ERROR(counter)  \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::ERROR, counter, \
+  &@ac_google_namespace@::LogMessage::SendToLog)
+#define SYSLOG_ERROR(counter)  \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::ERROR, counter, \
+  &@ac_google_namespace@::LogMessage::SendToSyslogAndLog)
+#define GOOGLE_LOG_FATAL(counter) \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::FATAL, counter, \
+  &@ac_google_namespace@::LogMessage::SendToLog)
+#define SYSLOG_FATAL(counter) \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::FATAL, counter, \
+  &@ac_google_namespace@::LogMessage::SendToSyslogAndLog)
+#define GOOGLE_LOG_DFATAL(counter) \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::DFATAL_LEVEL, counter, \
+  &@ac_google_namespace@::LogMessage::SendToLog)
+#define SYSLOG_DFATAL(counter) \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::DFATAL_LEVEL, counter, \
+  &@ac_google_namespace@::LogMessage::SendToSyslogAndLog)
+
+#if defined(WIN32) || defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) || defined(__CYGWIN32__)
+// A very useful logging macro to log windows errors:
+#define LOG_SYSRESULT(result) \
+  if (FAILED(result)) { \
+    LPTSTR message = NULL; \
+    LPTSTR msg = reinterpret_cast<LPTSTR>(&message); \
+    DWORD message_length = FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER | \
+                         FORMAT_MESSAGE_FROM_SYSTEM, \
+                         0, result, 0, msg, 100, NULL); \
+    if (message_length > 0) { \
+      @ac_google_namespace@::LogMessage(__FILE__, __LINE__, ERROR, 0, \
+          &@ac_google_namespace@::LogMessage::SendToLog).stream() << message; \
+      LocalFree(message); \
+    } \
+  }
+#endif
+
+// We use the preprocessor's merging operator, "##", so that, e.g.,
+// LOG(INFO) becomes the token GOOGLE_LOG_INFO.  There's some funny
+// subtle difference between ostream member streaming functions (e.g.,
+// ostream::operator<<(int) and ostream non-member streaming functions
+// (e.g., ::operator<<(ostream&, string&): it turns out that it's
+// impossible to stream something like a string directly to an unnamed
+// ostream. We employ a neat hack by calling the stream() member
+// function of LogMessage which seems to avoid the problem.
+#define LOG(severity) COMPACT_GOOGLE_LOG_ ## severity.stream()
+#define SYSLOG(severity) SYSLOG_ ## severity(0).stream()
+
+@ac_google_start_namespace@
+
+// They need the definitions of integer types.
+#include "glog/log_severity.h"
+#include "glog/vlog_is_on.h"
+
+// Initialize google's logging library. You will see the program name
+// specified by argv0 in log outputs.
+void InitGoogleLogging(const char* argv0);
+
+// Install a function which will be called after LOG(FATAL).
+void InstallFailureFunction(void (*fail_func)());
+
+class LogSink;  // defined below
+
+// If a non-NULL sink pointer is given, we push this message to that sink.
+// We then do normal LOG(severity) logging as well.
+// This is useful for capturing messages and passing/storing them
+// somewhere more specific than the global log of the process.
+// Argument types:
+//   LogSink* sink;
+//   LogSeverity severity;
+// The cast is to disambiguate NULL arguments.
+#define LOG_TO_SINK(sink, severity) \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::severity, \
+             static_cast<@ac_google_namespace@::LogSink*>(sink)).stream()
+
+// If a non-NULL pointer is given, we push the message onto the end
+// of a vector of strings; otherwise, we report it with LOG(severity).
+// This is handy for capturing messages and perhaps passing them back
+// to the caller, rather than reporting them immediately.
+// Argument types:
+//   LogSeverity severity;
+//   vector<string> *outvec;
+// The cast is to disambiguate NULL arguments.
+#define LOG_STRING(severity, outvec) \
+  @ac_google_namespace@::LogMessage(__FILE__, __LINE__, @ac_google_namespace@::severity, \
+             static_cast<std::vector<std::string>*>(outvec)).stream()
+
+#define LOG_IF(severity, condition) \
+  !(condition) ? (void) 0 : @ac_google_namespace@::LogMessageVoidify() & LOG(severity)
+#define SYSLOG_IF(severity, condition) \
+  !(condition) ? (void) 0 : @ac_google_namespace@::LogMessageVoidify() & SYSLOG(severity)
+
+#define LOG_ASSERT(condition)  \
+  LOG_IF(FATAL, !(condition)) << "Assert failed: " #condition
+#define SYSLOG_ASSERT(condition) \
+  SYSLOG_IF(FATAL, !(condition)) << "Assert failed: " #condition
+
+// CHECK dies with a fatal error if condition is not true.  It is *not*
+// controlled by NDEBUG, so the check will be executed regardless of
+// compilation mode.  Therefore, it is safe to do things like:
+//    CHECK(fp->Write(x) == 4)
+#define CHECK(condition)  \
+      LOG_IF(FATAL, GOOGLE_PREDICT_BRANCH_NOT_TAKEN(!(condition))) \
+             << "Check failed: " #condition " "
+
+// A container for a string pointer which can be evaluated to a bool -
+// true iff the pointer is NULL.
+struct CheckOpString {
+  CheckOpString(std::string* str) : str_(str) { }
+  // No destructor: if str_ is non-NULL, we're about to LOG(FATAL),
+  // so there's no point in cleaning up str_.
+  operator bool() const {
+    return GOOGLE_PREDICT_BRANCH_NOT_TAKEN(str_ != NULL);
+  }
+  std::string* str_;
+};
+
+// Function is overloaded for integral types to allow static const
+// integrals declared in classes and not defined to be used as arguments to
+// CHECK* macros. It's not encouraged though.
+template <class T>
+inline const T&       GetReferenceableValue(const T&           t) { return t; }
+inline char           GetReferenceableValue(char               t) { return t; }
+inline unsigned char  GetReferenceableValue(unsigned char      t) { return t; }
+inline signed char    GetReferenceableValue(signed char        t) { return t; }
+inline short          GetReferenceableValue(short              t) { return t; }
+inline unsigned short GetReferenceableValue(unsigned short     t) { return t; }
+inline int            GetReferenceableValue(int                t) { return t; }
+inline unsigned int   GetReferenceableValue(unsigned int       t) { return t; }
+inline long           GetReferenceableValue(long               t) { return t; }
+inline unsigned long  GetReferenceableValue(unsigned long      t) { return t; }
+inline long long      GetReferenceableValue(long long          t) { return t; }
+inline unsigned long long GetReferenceableValue(unsigned long long t) {
+  return t;
+}
+
+// This is a dummy class to define the following operator.
+struct DummyClassToDefineOperator {};
+
+@ac_google_end_namespace@
+
+// Define global operator<< to declare using ::operator<<.
+// This declaration will allow use to use CHECK macros for user
+// defined classes which have operator<< (e.g., stl_logging.h).
+inline std::ostream& operator<<(
+    std::ostream& out, const google::DummyClassToDefineOperator& dummy) {
+  return out;
+}
+
+@ac_google_start_namespace@
+
+// Build the error message string.
+template<class t1, class t2>
+std::string* MakeCheckOpString(const t1& v1, const t2& v2, const char* names) {
+  // It means that we cannot use stl_logging if compiler doesn't
+  // support using expression for operator.
+  // TODO(hamaji): Figure out a way to fix.
+#if @ac_cv_cxx_using_operator@
+  using ::operator<<;
+#endif
+  std::strstream ss;
+  ss << names << " (" << v1 << " vs. " << v2 << ")";
+  return new std::string(ss.str(), ss.pcount());
+}
+
+// Helper functions for CHECK_OP macro.
+// The (int, int) specialization works around the issue that the compiler
+// will not instantiate the template version of the function on values of
+// unnamed enum type - see comment below.
+#define DEFINE_CHECK_OP_IMPL(name, op) \
+  template <class t1, class t2> \
+  inline std::string* Check##name##Impl(const t1& v1, const t2& v2, \
+                                        const char* names) { \
+    if (v1 op v2) return NULL; \
+    else return MakeCheckOpString(v1, v2, names); \
+  } \
+  inline std::string* Check##name##Impl(int v1, int v2, const char* names) { \
+    return Check##name##Impl<int, int>(v1, v2, names); \
+  }
+
+// Use _EQ, _NE, _LE, etc. in case the file including base/logging.h
+// provides its own #defines for the simpler names EQ, NE, LE, etc.
+// This happens if, for example, those are used as token names in a
+// yacc grammar.
+DEFINE_CHECK_OP_IMPL(_EQ, ==)
+DEFINE_CHECK_OP_IMPL(_NE, !=)
+DEFINE_CHECK_OP_IMPL(_LE, <=)
+DEFINE_CHECK_OP_IMPL(_LT, < )
+DEFINE_CHECK_OP_IMPL(_GE, >=)
+DEFINE_CHECK_OP_IMPL(_GT, > )
+#undef DEFINE_CHECK_OP_IMPL
+
+// Helper macro for binary operators.
+// Don't use this macro directly in your code, use CHECK_EQ et al below.
+
+#if defined(STATIC_ANALYSIS)
+// Only for static analysis tool to know that it is equivalent to assert
+#define CHECK_OP_LOG(name, op, val1, val2, log) CHECK((val1) op (val2))
+#elif !defined(NDEBUG)
+// In debug mode, avoid constructing CheckOpStrings if possible,
+// to reduce the overhead of CHECK statments by 2x.
+// Real DCHECK-heavy tests have seen 1.5x speedups.
+
+// The meaning of "string" might be different between now and 
+// when this macro gets invoked (e.g., if someone is experimenting
+// with other string implementations that get defined after this
+// file is included).  Save the current meaning now and use it 
+// in the macro.
+typedef std::string _Check_string;
+#define CHECK_OP_LOG(name, op, val1, val2, log) \
+  while (@ac_google_namespace@::_Check_string* _result = \
+         @ac_google_namespace@::Check##name##Impl((val1), (val2), #val1 " " #op " " #val2)) \
+    log(__FILE__, __LINE__, @ac_google_namespace@::CheckOpString(_result)).stream()
+#else
+// In optimized mode, use CheckOpString to hint to compiler that
+// the while condition is unlikely.
+#define CHECK_OP_LOG(name, op, val1, val2, log) \
+  while (@ac_google_namespace@::CheckOpString _result = \
+         @ac_google_namespace@::Check##name##Impl(GetReferenceableValue(val1), \
+                           GetReferenceableValue(val2), \
+                           #val1 " " #op " " #val2)) \
+    log(__FILE__, __LINE__, _result).stream()
+#endif  // STATIC_ANALYSIS, !NDEBUG
+
+#define CHECK_OP(name, op, val1, val2) \
+  CHECK_OP_LOG(name, op, val1, val2, @ac_google_namespace@::LogMessageFatal)
+
+// Equality/Inequality checks - compare two values, and log a FATAL message
+// including the two values when the result is not as expected.  The values
+// must have operator<<(ostream, ...) defined.
+//
+// You may append to the error message like so:
+//   CHECK_NE(1, 2) << ": The world must be ending!";
+//
+// We are very careful to ensure that each argument is evaluated exactly
+// once, and that anything which is legal to pass as a function argument is
+// legal here.  In particular, the arguments may be temporary expressions
+// which will end up being destroyed at the end of the apparent statement,
+// for example:
+//   CHECK_EQ(string("abc")[1], 'b');
+//
+// WARNING: These don't compile correctly if one of the arguments is a pointer
+// and the other is NULL. To work around this, simply static_cast NULL to the
+// type of the desired pointer.
+
+#define CHECK_EQ(val1, val2) CHECK_OP(_EQ, ==, val1, val2)
+#define CHECK_NE(val1, val2) CHECK_OP(_NE, !=, val1, val2)
+#define CHECK_LE(val1, val2) CHECK_OP(_LE, <=, val1, val2)
+#define CHECK_LT(val1, val2) CHECK_OP(_LT, < , val1, val2)
+#define CHECK_GE(val1, val2) CHECK_OP(_GE, >=, val1, val2)
+#define CHECK_GT(val1, val2) CHECK_OP(_GT, > , val1, val2)
+
+// Check that the input is non NULL.  This very useful in constructor
+// initializer lists.
+
+#define CHECK_NOTNULL(val) \
+  @ac_google_namespace@::CheckNotNull(__FILE__, __LINE__, "'" #val "' Must be non NULL", (val))
+
+// Helper functions for string comparisons.
+// To avoid bloat, the definitions are in logging.cc.
+#define DECLARE_CHECK_STROP_IMPL(func, expected) \
+  std::string* Check##func##expected##Impl(const char* s1, const char* s2, \
+                                           const char* names);
+DECLARE_CHECK_STROP_IMPL(strcmp, true)
+DECLARE_CHECK_STROP_IMPL(strcmp, false)
+DECLARE_CHECK_STROP_IMPL(strcasecmp, true)
+DECLARE_CHECK_STROP_IMPL(strcasecmp, false)
+#undef DECLARE_CHECK_STROP_IMPL
+
+// Helper macro for string comparisons.
+// Don't use this macro directly in your code, use CHECK_STREQ et al below.
+#define CHECK_STROP(func, op, expected, s1, s2) \
+  while (@ac_google_namespace@::CheckOpString _result = \
+         @ac_google_namespace@::Check##func##expected##Impl((s1), (s2), \
+                                     #s1 " " #op " " #s2)) \
+    LOG(FATAL) << *_result.str_
+
+
+// String (char*) equality/inequality checks.
+// CASE versions are case-insensitive.
+//
+// Note that "s1" and "s2" may be temporary strings which are destroyed
+// by the compiler at the end of the current "full expression"
+// (e.g. CHECK_STREQ(Foo().c_str(), Bar().c_str())).
+
+#define CHECK_STREQ(s1, s2) CHECK_STROP(strcmp, ==, true, s1, s2)
+#define CHECK_STRNE(s1, s2) CHECK_STROP(strcmp, !=, false, s1, s2)
+#define CHECK_STRCASEEQ(s1, s2) CHECK_STROP(strcasecmp, ==, true, s1, s2)
+#define CHECK_STRCASENE(s1, s2) CHECK_STROP(strcasecmp, !=, false, s1, s2)
+
+#define CHECK_INDEX(I,A) CHECK(I < (sizeof(A)/sizeof(A[0])))
+#define CHECK_BOUND(B,A) CHECK(B <= (sizeof(A)/sizeof(A[0])))
+
+#define CHECK_DOUBLE_EQ(val1, val2)              \
+  do {                                           \
+    CHECK_LE((val1), (val2)+0.000000000000001L); \
+    CHECK_GE((val1), (val2)-0.000000000000001L); \
+  } while (0)
+
+#define CHECK_NEAR(val1, val2, margin)           \
+  do {                                           \
+    CHECK_LE((val1), (val2)+(margin));           \
+    CHECK_GE((val1), (val2)-(margin));           \
+  } while (0)
+
+// perror()..googly style!
+//
+// PLOG() and PLOG_IF() and PCHECK() behave exactly like their LOG* and
+// CHECK equivalents with the addition that they postpend a description
+// of the current state of errno to their output lines.
+
+#define PLOG(severity) GOOGLE_PLOG(severity, 0).stream()
+
+#define GOOGLE_PLOG(severity, counter)  \
+  @ac_google_namespace@::ErrnoLogMessage( \
+      __FILE__, __LINE__, @ac_google_namespace@::severity, counter, \
+      &@ac_google_namespace@::LogMessage::SendToLog)
+
+#define PLOG_IF(severity, condition) \
+  !(condition) ? (void) 0 : @ac_google_namespace@::LogMessageVoidify() & PLOG(severity)
+
+// A CHECK() macro that postpends errno if the condition is false. E.g.
+//
+// if (poll(fds, nfds, timeout) == -1) { PCHECK(errno == EINTR); ... }
+#define PCHECK(condition)  \
+      PLOG_IF(FATAL, GOOGLE_PREDICT_BRANCH_NOT_TAKEN(!(condition))) \
+              << "Check failed: " #condition " "
+
+// A CHECK() macro that lets you assert the success of a function that
+// returns -1 and sets errno in case of an error. E.g.
+//
+// CHECK_ERR(mkdir(path, 0700));
+//
+// or
+//
+// int fd = open(filename, flags); CHECK_ERR(fd) << ": open " << filename;
+#define CHECK_ERR(invocation)                                          \
+PLOG_IF(FATAL, GOOGLE_PREDICT_BRANCH_NOT_TAKEN((invocation) == -1))    \
+        << #invocation
+
+// Use macro expansion to create, for each use of LOG_EVERY_N(), static
+// variables with the __LINE__ expansion as part of the variable name.
+#define LOG_EVERY_N_VARNAME(base, line) LOG_EVERY_N_VARNAME_CONCAT(base, line)
+#define LOG_EVERY_N_VARNAME_CONCAT(base, line) base ## line
+
+#define LOG_OCCURRENCES LOG_EVERY_N_VARNAME(occurrences_, __LINE__)
+#define LOG_OCCURRENCES_MOD_N LOG_EVERY_N_VARNAME(occurrences_mod_n_, __LINE__)
+
+#define SOME_KIND_OF_LOG_EVERY_N(severity, n, what_to_do) \
+  static int LOG_OCCURRENCES = 0, LOG_OCCURRENCES_MOD_N = 0; \
+  ++LOG_OCCURRENCES; \
+  if (++LOG_OCCURRENCES_MOD_N > n) LOG_OCCURRENCES_MOD_N -= n; \
+  if (LOG_OCCURRENCES_MOD_N == 1) \
+    @ac_google_namespace@::LogMessage( \
+        __FILE__, __LINE__, @ac_google_namespace@::severity, LOG_OCCURRENCES, \
+        &what_to_do).stream()
+
+#define SOME_KIND_OF_LOG_IF_EVERY_N(severity, condition, n, what_to_do) \
+  static int LOG_OCCURRENCES = 0, LOG_OCCURRENCES_MOD_N = 0; \
+  ++LOG_OCCURRENCES; \
+  if (condition && \
+      ((LOG_OCCURRENCES_MOD_N=(LOG_OCCURRENCES_MOD_N + 1) % n) == (1 % n))) \
+    @ac_google_namespace@::LogMessage( \
+        __FILE__, __LINE__, @ac_google_namespace@::severity, LOG_OCCURRENCES, \
+                 &what_to_do).stream()
+
+#define SOME_KIND_OF_PLOG_EVERY_N(severity, n, what_to_do) \
+  static int LOG_OCCURRENCES = 0, LOG_OCCURRENCES_MOD_N = 0; \
+  ++LOG_OCCURRENCES; \
+  if (++LOG_OCCURRENCES_MOD_N > n) LOG_OCCURRENCES_MOD_N -= n; \
+  if (LOG_OCCURRENCES_MOD_N == 1) \
+    @ac_google_namespace@::ErrnoLogMessage( \
+        __FILE__, __LINE__, @ac_google_namespace@::severity, LOG_OCCURRENCES, \
+        &what_to_do).stream()
+
+#define SOME_KIND_OF_LOG_FIRST_N(severity, n, what_to_do) \
+  static int LOG_OCCURRENCES = 0; \
+  if (LOG_OCCURRENCES <= n) \
+    ++LOG_OCCURRENCES; \
+  if (LOG_OCCURRENCES <= n) \
+    @ac_google_namespace@::LogMessage( \
+        __FILE__, __LINE__, @ac_google_namespace@::severity, LOG_OCCURRENCES, \
+        &what_to_do).stream()
+
+#define LOG_EVERY_N(severity, n) \
+  SOME_KIND_OF_LOG_EVERY_N(severity, (n), @ac_google_namespace@::LogMessage::SendToLog)
+
+#define SYSLOG_EVERY_N(severity, n) \
+  SOME_KIND_OF_LOG_EVERY_N(severity, (n), @ac_google_namespace@::LogMessage::SendToSyslogAndLog)
+
+#define PLOG_EVERY_N(severity, n) \
+  SOME_KIND_OF_PLOG_EVERY_N(severity, (n), @ac_google_namespace@::LogMessage::SendToLog)
+
+#define LOG_FIRST_N(severity, n) \
+  SOME_KIND_OF_LOG_FIRST_N(severity, (n), @ac_google_namespace@::LogMessage::SendToLog)
+
+#define LOG_IF_EVERY_N(severity, condition, n) \
+  SOME_KIND_OF_LOG_IF_EVERY_N(severity, (condition), (n), @ac_google_namespace@::LogMessage::SendToLog)
+
+// We want the special COUNTER value available for LOG_EVERY_X()'ed messages
+enum PRIVATE_Counter {COUNTER};
+
+
+// Plus some debug-logging macros that get compiled to nothing for production
+
+#ifndef NDEBUG
+
+#define DLOG(severity) LOG(severity)
+#define DLOG_IF(severity, condition) LOG_IF(severity, condition)
+#define DLOG_EVERY_N(severity, n) LOG_EVERY_N(severity, n)
+#define DLOG_IF_EVERY_N(severity, condition, n) \
+  LOG_IF_EVERY_N(severity, condition, n)
+#define DLOG_ASSERT(condition) LOG_ASSERT(condition)
+
+// debug-only checking.  not executed in NDEBUG mode.
+#define DCHECK(condition) CHECK(condition)
+#define DCHECK_EQ(val1, val2) CHECK_EQ(val1, val2)
+#define DCHECK_NE(val1, val2) CHECK_NE(val1, val2)
+#define DCHECK_LE(val1, val2) CHECK_LE(val1, val2)
+#define DCHECK_LT(val1, val2) CHECK_LT(val1, val2)
+#define DCHECK_GE(val1, val2) CHECK_GE(val1, val2)
+#define DCHECK_GT(val1, val2) CHECK_GT(val1, val2)
+#define DCHECK_STREQ(str1, str2) CHECK_STREQ(str1, str2)
+#define DCHECK_STRCASEEQ(str1, str2) CHECK_STRCASEEQ(str1, str2)
+#define DCHECK_STRNE(str1, str2) CHECK_STRNE(str1, str2)
+#define DCHECK_STRCASENE(str1, str2) CHECK_STRCASENE(str1, str2)
+
+#else  // NDEBUG
+
+#define DLOG(severity) \
+  true ? (void) 0 : @ac_google_namespace@::LogMessageVoidify() & LOG(severity)
+
+#define DLOG_IF(severity, condition) \
+  (true || !(condition)) ? (void) 0 : @ac_google_namespace@::LogMessageVoidify() & LOG(severity)
+
+#define DLOG_EVERY_N(severity, n) \
+  true ? (void) 0 : @ac_google_namespace@::LogMessageVoidify() & LOG(severity)
+
+#define DLOG_IF_EVERY_N(severity, condition, n) \
+  (true || !(condition))? (void) 0 : @ac_google_namespace@::LogMessageVoidify() & LOG(severity)
+
+#define DLOG_ASSERT(condition) \
+  true ? (void) 0 : LOG_ASSERT(condition)
+
+#define DCHECK(condition) \
+  while (false) \
+    CHECK(condition)
+
+#define DCHECK_EQ(val1, val2) \
+  while (false) \
+    CHECK_EQ(val1, val2)
+
+#define DCHECK_NE(val1, val2) \
+  while (false) \
+    CHECK_NE(val1, val2)
+
+#define DCHECK_LE(val1, val2) \
+  while (false) \
+    CHECK_LE(val1, val2)
+
+#define DCHECK_LT(val1, val2) \
+  while (false) \
+    CHECK_LT(val1, val2)
+
+#define DCHECK_GE(val1, val2) \
+  while (false) \
+    CHECK_GE(val1, val2)
+
+#define DCHECK_GT(val1, val2) \
+  while (false) \
+    CHECK_GT(val1, val2)
+
+#define DCHECK_STREQ(str1, str2) \
+  while (false) \
+    CHECK_STREQ(str1, str2)
+
+#define DCHECK_STRCASEEQ(str1, str2) \
+  while (false) \
+    CHECK_STRCASEEQ(str1, str2)
+
+#define DCHECK_STRNE(str1, str2) \
+  while (false) \
+    CHECK_STRNE(str1, str2)
+
+#define DCHECK_STRCASENE(str1, str2) \
+  while (false) \
+    CHECK_STRCASENE(str1, str2)
+
+
+#endif  // NDEBUG
+
+// Log only in verbose mode.
+
+#define VLOG(verboselevel) LOG_IF(INFO, VLOG_IS_ON(verboselevel))
+
+#define VLOG_IF(verboselevel, condition) \
+  LOG_IF(INFO, (condition) && VLOG_IS_ON(verboselevel))
+
+#define VLOG_EVERY_N(verboselevel, n) \
+  LOG_IF_EVERY_N(INFO, VLOG_IS_ON(verboselevel), n)
+
+#define VLOG_IF_EVERY_N(verboselevel, condition, n) \
+  LOG_IF_EVERY_N(INFO, (condition) && VLOG_IS_ON(verboselevel), n)
+
+//
+// This class more or less represents a particular log message.  You
+// create an instance of LogMessage and then stream stuff to it.
+// When you finish streaming to it, ~LogMessage is called and the
+// full message gets streamed to the appropriate destination.
+//
+// You shouldn't actually use LogMessage's constructor to log things,
+// though.  You should use the LOG() macro (and variants thereof)
+// above.
+class LogMessage {
+public:
+  enum {
+    // Passing kNoLogPrefix for the line number disables the
+    // log-message prefix. Useful for using the LogMessage
+    // infrastructure as a printing utility. See also the --log_prefix
+    // flag for controlling the log-message prefix on an
+    // application-wide basis.
+    kNoLogPrefix = -1
+  };
+
+  class LogStream : public std::ostrstream {
+  public:
+    LogStream(char *buf, int len, int ctr)
+      : ostrstream(buf, len),
+        ctr_(ctr) {
+      self_ = this;
+    }
+
+    int ctr() const { return ctr_; }
+    void set_ctr(int ctr) { ctr_ = ctr; }
+    LogStream* self() const { return self_; }
+
+  private:
+    int ctr_;  // Counter hack (for the LOG_EVERY_X() macro)
+    LogStream *self_;  // Consistency check hack
+  };
+
+public:
+  // icc 8 requires this typedef to avoid an internal compiler error.
+  typedef void (LogMessage::*SendMethod)();
+
+  LogMessage(const char* file, int line, LogSeverity severity, int ctr,
+             SendMethod send_method);
+
+  // Two special constructors that generate reduced amounts of code at
+  // LOG call sites for common cases.
+
+  // Used for LOG(INFO): Implied are:
+  // severity = INFO, ctr = 0, send_method = &LogMessage::SendToLog.
+  //
+  // Using this constructor instead of the more complex constructor above
+  // saves 19 bytes per call site.
+  LogMessage(const char* file, int line);
+
+  // Used for LOG(severity) where severity != INFO.  Implied
+  // are: ctr = 0, send_method = &LogMessage::SendToLog
+  //
+  // Using this constructor instead of the more complex constructor above
+  // saves 17 bytes per call site.
+  LogMessage(const char* file, int line, LogSeverity severity);
+
+  // Constructor to also log this message to a specified sink (if not NULL).
+  // Implied are: ctr = 0, send_method = &LogMessage::SendToSinkAndLog.
+  LogMessage(const char* file, int line, LogSeverity severity, LogSink* sink);
+
+  // Constructor where we also give a vector<string> pointer
+  // for storing the messages (if the pointer is not NULL).
+  // Implied are: ctr = 0, send_method = &LogMessage::SaveOrSendToLog.
+  LogMessage(const char* file, int line, LogSeverity severity,
+             std::vector<std::string>* outvec);
+
+  // A special constructor used for check failures
+  LogMessage(const char* file, int line, const CheckOpString& result);
+
+  ~LogMessage();
+
+  // Flush a buffered message to the sink set in the constructor.  Always
+  // called by the destructor, it may also be called from elsewhere if
+  // needed.  Only the first call is actioned; any later ones are ignored.
+  void Flush();
+
+  // An arbitrary limit on the length of a single log message.  This
+  // is so that streaming can be done more efficiently.
+  static const size_t kMaxLogMessageLen;
+
+  // Theses should not be called directly outside of logging.*,
+  // only passed as SendMethod arguments to other LogMessage methods:
+  void SendToLog();  // Actually dispatch to the logs
+  void SendToSyslogAndLog();  // Actually dispatch to syslog and the logs
+
+  // Call abort() or similar to perform LOG(FATAL) crash.
+  static void Fail() @ac_cv___attribute___noreturn@;
+
+  std::ostream& stream() { return data_->stream_; }
+
+  int preserved_errno() const { return data_->preserved_errno_; }
+
+  // Must be called without the log_mutex held.  (L < log_mutex)
+  static int64 num_messages(int severity);
+
+private:
+
+  // Fully internal SendMethod cases:
+  void SendToSinkAndLog();  // Send to sink if provided and dispatch to the logs
+  void SaveOrSendToLog();  // Save to stringvec if provided, else to logs
+
+  struct LogMessageData;
+
+  void Init(const char* file, int line, LogSeverity severity,
+            void (LogMessage::*send_method)());
+
+  LogMessageData* GetMessageData(int preserved_errno, LogSeverity, int ctr);
+
+  // Counts of messages sent at each priority:
+  static int64 num_messages_[NUM_SEVERITIES];  // under log_mutex
+
+  static LogMessageData fatal_message_data_;
+
+  // We keep the data in a separate struct so that each instance of
+  // LogMessage uses less stack space.
+  struct LogMessageData {
+    // ORDER DEPENDENCY: preserved_errno_ comes before buf_ comes before
+    // message_text_ comes before stream_
+    int preserved_errno_;      // preserved errno
+    char* buf_;
+    char* message_text_;  // Complete message text (points to selected buffer)
+    LogStream stream_;
+    const char severity_;      // What level is this LogMessage logged at?
+    int line_;                 // line number where logging call is.
+    void (LogMessage::*send_method_)();  // Call this in destructor to send
+    union {  // At most one of these is used: union to keep the size low.
+      LogSink* sink_;            // NULL or sink to send message to
+      std::vector<std::string>* outvec_;  // NULL or vector to push message onto
+    };
+    time_t timestamp_;         // Time of creation of LogMessage
+    struct ::tm tm_time_;      // Time of creation of LogMessage
+    size_t num_prefix_chars_;  // How many chars of "prefix" for this message?
+    size_t num_chars_to_log_;  // How many chars of msg to send to log?
+    size_t num_chars_to_syslog_;  // How many chars of msg to send to syslog?
+
+    const char* basename_;     // basename of the file which called LOG.
+    const char* fullname_;     // full name (including directory)
+                               // of the file which called LOG.
+
+    bool has_been_flushed_;    // False if data has not yet been flushed.
+
+    LogMessageData(int preserved_errno, LogSeverity severity, int ctr);
+    ~LogMessageData();
+
+   private:
+    DISALLOW_EVIL_CONSTRUCTORS(LogMessageData);
+  };
+
+  LogMessageData* allocated_;
+  LogMessageData* data_;
+
+  friend class LogDestination;
+
+  DISALLOW_EVIL_CONSTRUCTORS(LogMessage);
+};
+
+// This class happens to be thread-hostile because all instances share
+// a single data buffer, but since it can only be created just before
+// the process dies, we don't worry so much.
+class LogMessageFatal : public LogMessage {
+ public:
+  LogMessageFatal(const char* file, int line);
+  LogMessageFatal(const char* file, int line, const CheckOpString& result);
+  ~LogMessageFatal() @ac_cv___attribute___noreturn@;
+};
+
+// A non-macro interface to the log facility; (useful
+// when the logging level is not a compile-time constant).
+inline void LogAtLevel(int const log_level, std::string const &msg) {
+  LogMessage(__FILE__, __LINE__, log_level).stream() << msg;
+}
+
+// A small helper for CHECK_NOTNULL().
+template <typename T>
+T* CheckNotNull(const char *file, int line, const char *names, T* t) {
+  if (t == NULL) {
+    LogMessageFatal(file, line, new std::string(names));
+  }
+  return t;
+}
+
+// Allow folks to put a counter in the LOG_EVERY_X()'ed messages. This
+// only works if ostream is a LogStream. If the ostream is not a
+// LogStream you'll get an assert saying as much at runtime.
+std::ostream& operator<<(std::ostream &os, const PRIVATE_Counter&);
+
+
+// Derived class for PLOG*() above.
+class ErrnoLogMessage : public LogMessage {
+ public:
+
+  ErrnoLogMessage(const char* file, int line, LogSeverity severity, int ctr,
+                  void (LogMessage::*send_method)());
+
+  // Postpends ": strerror(errno) [errno]".
+  ~ErrnoLogMessage();
+
+ private:
+
+  DISALLOW_EVIL_CONSTRUCTORS(ErrnoLogMessage);
+};
+
+
+// This class is used to explicitly ignore values in the conditional
+// logging macros.  This avoids compiler warnings like "value computed
+// is not used" and "statement has no effect".
+
+class LogMessageVoidify {
+ public:
+  LogMessageVoidify() { }
+  // This has to be an operator with a precedence lower than << but
+  // higher than ?:
+  void operator&(std::ostream&) { }
+};
+
+
+// Flushes all log files that contains messages that are at least of
+// the specified severity level.  Thread-safe.
+void FlushLogFiles(LogSeverity min_severity);
+
+// Flushes all log files that contains messages that are at least of
+// the specified severity level. Thread-hostile because it ignores
+// locking -- used for catastrophic failures.
+void FlushLogFilesUnsafe(LogSeverity min_severity);
+
+//
+// Set the destination to which a particular severity level of log
+// messages is sent.  If base_filename is "", it means "don't log this
+// severity".  Thread-safe.
+//
+void SetLogDestination(LogSeverity severity, const char* base_filename);
+
+//
+// Set the basename of the symlink to the latest log file at a given
+// severity.  If symlink_basename is empty, do not make a symlink.  If
+// you don't call this function, the symlink basename is the
+// invocation name of the program.  Thread-safe.
+//
+void SetLogSymlink(LogSeverity severity, const char* symlink_basename);
+
+//
+// Used to send logs to some other kind of destination
+// Users should subclass LogSink and override send to do whatever they want.
+// Implementations must be thread-safe because a shared instance will
+// be called from whichever thread ran the LOG(XXX) line.
+class LogSink {
+ public:
+  virtual ~LogSink();
+
+  // Sink's logging logic (message_len is such as to exclude '\n' at the end).
+  // This method can't use LOG() or CHECK() as logging system mutex(s) are held
+  // during this call.
+  virtual void send(LogSeverity severity, const char* full_filename,
+                    const char* base_filename, int line,
+                    const struct ::tm* tm_time,
+                    const char* message, size_t message_len) = 0;
+
+  // Redefine this to implement waiting for
+  // the sink's logging logic to complete.
+  // It will be called after each send() returns,
+  // but before that LogMessage exits or crashes.
+  // By default this function does nothing.
+  // Using this function one can implement complex logic for send()
+  // that itself involves logging; and do all this w/o causing deadlocks and
+  // inconsistent rearrangement of log messages.
+  // E.g. if a LogSink has thread-specific actions, the send() method
+  // can simply add the message to a queue and wake up another thread that
+  // handles real logging while itself making some LOG() calls;
+  // WaitTillSent() can be implemented to wait for that logic to complete.
+  // See our unittest for an example.
+  virtual void WaitTillSent();
+
+  // Returns the normal text output of the log message.
+  // Can be useful to implement send().
+  static std::string ToString(LogSeverity severity, const char* file, int line,
+                              const struct ::tm* tm_time,
+                              const char* message, size_t message_len);
+};
+
+// Add or remove a LogSink as a consumer of logging data.  Thread-safe.
+void AddLogSink(LogSink *destination);
+void RemoveLogSink(LogSink *destination);
+
+//
+// Specify an "extension" added to the filename specified via
+// SetLogDestination.  This applies to all severity levels.  It's
+// often used to append the port we're listening on to the logfile
+// name.  Thread-safe.
+//
+void SetLogFilenameExtension(const char* filename_extension);
+
+//
+// Make it so that all log messages of at least a particular severity
+// are logged to stderr (in addition to logging to the usual log
+// file(s)).  Thread-safe.
+//
+void SetStderrLogging(LogSeverity min_severity);
+
+//
+// Make it so that all log messages go only to stderr.  Thread-safe.
+//
+void LogToStderr();
+
+//
+// Make it so that all log messages of at least a particular severity are
+// logged via email to a list of addresses (in addition to logging to the
+// usual log file(s)).  The list of addresses is just a string containing
+// the email addresses to send to (separated by spaces, say).  Thread-safe.
+//
+void SetEmailLogging(LogSeverity min_severity, const char* addresses);
+
+// A simple function that sends email. dest is a commma-separated
+// list of addressess.  Thread-safe.
+bool SendEmail(const char*dest, const char *subject, const char*body);
+
+const std::vector<std::string>& GetLoggingDirectories();
+
+// For tests only:  Clear the internal [cached] list of logging directories to
+// force a refresh the next time GetLoggingDirectories is called.
+// Thread-hostile.
+void TestOnly_ClearLoggingDirectoriesList();
+
+// Returns a set of existing temporary directories, which will be a
+// subset of the directories returned by GetLogginDirectories().
+// Thread-safe.
+void GetExistingTempDirectories(std::vector<std::string>* list);
+
+// Print any fatal message again -- useful to call from signal handler
+// so that the last thing in the output is the fatal message.
+// Thread-hostile, but a race is unlikely.
+void ReprintFatalMessage();
+
+// Truncate a log file that may be the append-only output of multiple
+// processes and hence can't simply be renamed/reopened (typically a
+// stdout/stderr).  If the file "path" is > "limit" bytes, copy the
+// last "keep" bytes to offset 0 and truncate the rest. Since we could
+// be racing with other writers, this approach has the potential to
+// lose very small amounts of data. For security, only follow symlinks
+// if the path is /proc/self/fd/*
+void TruncateLogFile(const char *path, int64 limit, int64 keep);
+
+// Truncate stdout and stderr if they are over the value specified by
+// --max_log_size; keep the final 1MB.  This function has the same
+// race condition as TruncateLogFile.
+void TruncateStdoutStderr();
+
+// Return the string representation of the provided LogSeverity level.
+// Thread-safe.
+const char* GetLogSeverityName(LogSeverity severity);
+
+// ---------------------------------------------------------------------
+// Implementation details that are not useful to most clients
+// ---------------------------------------------------------------------
+
+// A Logger is the interface used by logging modules to emit entries
+// to a log.  A typical implementation will dump formatted data to a
+// sequence of files.  We also provide interfaces that will forward
+// the data to another thread so that the invoker never blocks.
+// Implementations should be thread-safe since the logging system
+// will write to them from multiple threads.
+
+namespace base {
+
+class Logger {
+ public:
+  virtual ~Logger();
+
+  // Writes "message[0,message_len-1]" corresponding to an event that
+  // occurred at "timestamp".  If "force_flush" is true, the log file
+  // is flushed immediately.
+  //
+  // The input message has already been formatted as deemed
+  // appropriate by the higher level logging facility.  For example,
+  // textual log messages already contain timestamps, and the
+  // file:linenumber header.
+  virtual void Write(bool force_flush,
+                     time_t timestamp,
+                     const char* message,
+                     int message_len) = 0;
+
+  // Flush any buffered messages
+  virtual void Flush() = 0;
+
+  // Get the current LOG file size.
+  // The returned value is approximate since some
+  // logged data may not have been flushed to disk yet.
+  virtual uint32 LogSize() = 0;
+};
+
+// Get the logger for the specified severity level.  The logger
+// remains the property of the logging module and should not be
+// deleted by the caller.  Thread-safe.
+extern Logger* GetLogger(LogSeverity level);
+
+// Set the logger for the specified severity level.  The logger
+// becomes the property of the logging module and should not
+// be deleted by the caller.  Thread-safe.
+extern void SetLogger(LogSeverity level, Logger* logger);
+
+}
+
+// glibc has traditionally implemented two incompatible versions of
+// strerror_r(). There is a poorly defined convention for picking the
+// version that we want, but it is not clear whether it even works with
+// all versions of glibc.
+// So, instead, we provide this wrapper that automatically detects the
+// version that is in use, and then implements POSIX semantics.
+// N.B. In addition to what POSIX says, we also guarantee that "buf" will
+// be set to an empty string, if this function failed. This means, in most
+// cases, you do not need to check the error code and you can directly
+// use the value of "buf". It will never have an undefined value.
+int posix_strerror_r(int err, char *buf, size_t len);
+
+
+// A class for which we define operator<<, which does nothing.
+class NullStream : public LogMessage::LogStream {
+ public:
+  // Initialize the LogStream so the messages can be written somewhere
+  // (they'll never be actually displayed). This will be needed if a
+  // NullStream& is implicitly converted to LogStream&, in which case
+  // the overloaded NullStream::operator<< will not be invoked.
+  NullStream() : LogMessage::LogStream(message_buffer_, 1, 0) { }
+  NullStream &stream() { return *this; }
+ private:
+  // A very short buffer for messages (which we discard anyway). This
+  // will be needed if NullStream& converted to LogStream& (e.g. as a
+  // result of a conditional expression).
+  char message_buffer_[2];
+};
+
+// Do nothing. This operator is inline, allowing the message to be
+// compiled away. The message will not be compiled away if we do
+// something like (flag ? LOG(INFO) : LOG(ERROR)) << message; when
+// SKIP_LOG=WARNING. In those cases, NullStream will be implicitly
+// converted to LogStream and the message will be computed and then
+// quietly discarded.
+template<class T>
+inline NullStream& operator<<(NullStream &str, const T &value) { return str; }
+
+// Similar to NullStream, but aborts the program (without stack
+// trace), like LogMessageFatal.
+class NullStreamFatal : public NullStream {
+ public:
+  @ac_cv___attribute___noreturn@ ~NullStreamFatal() { _exit(1); }
+};
+
+// Undefine these macros not to taint namespace.
+#undef DISALLOW_EVIL_CONSTRUCTORS
+
+@ac_google_end_namespace@
+
+#endif // _LOGGING_H_
diff --git a/src/glog/raw_logging.h.in b/src/glog/raw_logging.h.in
new file mode 100644
index 0000000..07e8e56
--- /dev/null
+++ b/src/glog/raw_logging.h.in
@@ -0,0 +1,87 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Maxim Lifantsev
+//
+// Logging routines that do not allocate any memory and acquire any
+// locks, and can therefore be used by low-level memory allocation
+// and synchronization code.
+
+#ifndef BASE_RAW_LOGGING_H__
+#define BASE_RAW_LOGGING_H__
+
+@ac_google_start_namespace@
+
+#include "glog/log_severity.h"
+#include "glog/vlog_is_on.h"
+
+// This is similar to LOG(severity) << format... and VLOG(level) << format..,
+// but
+// * it is to be used ONLY by low-level modules that can't use normal LOG()
+// * it is desiged to be a low-level logger that does not allocate any
+//   memory and does not need any locks, hence:
+// * it logs straight and ONLY to STDERR w/o buffering
+// * it uses an explicit format and arguments list
+// * it will silently chop off really long message strings
+// Usage example:
+//   RAW_LOG(ERROR, "Failed foo with %i: %s", status, error);
+//   RAW_VLOG(3, "status is %i", status);
+// These will print an almost standard log lines like this to stderr only:
+//   E0821 211317 file.cc:123] RAW: Failed foo with 22: bad_file
+//   I0821 211317 file.cc:142] RAW: status is 20
+#define RAW_LOG(severity, ...) \
+  do { \
+    @ac_google_namespace@::RawLog__(@ac_google_namespace@::severity, __FILE__,  __LINE__, __VA_ARGS__); \
+  } while (0)
+
+#define RAW_VLOG(verboselevel, ...) \
+  do { \
+    if (VLOG_IS_ON(verboselevel)) { \
+      @ac_google_namespace@::RawLog__(@ac_google_namespace@::INFO, __FILE__,  __LINE__, __VA_ARGS__); \
+    } \
+  } while (0)
+
+// Similar to CHECK(condition) << message,
+// but for low-level modules: we use only RAW_LOG that does not allocate memory.
+// We do not want to provide args list here to encourage this usage:
+//   if (!cond)  RAW_LOG(FATAL, "foo ...", hard_to_compute_args);
+// so that the args are not computed when not needed.
+#define RAW_CHECK(condition, message) \
+  do { \
+    if (!(condition)) { \
+      RAW_LOG(FATAL, "Check %s failed: %s", #condition, message); \
+    } \
+  } while (0)
+
+// Debug versions of RAW_LOG and RAW_CHECK
+#ifndef NDEBUG
+
+#define RAW_DLOG(severity, ...) RAW_LOG(severity, __VA_ARGS__)
+#define RAW_DCHECK(condition, message) RAW_CHECK(condition, message)
+
+#else  // NDEBUG
+
+#define RAW_DLOG(severity, ...) \
+  while (false) \
+    RAW_LOG(severity, __VA_ARGS__)
+#define RAW_DCHECK(condition, message) \
+  while (false) \
+    RAW_CHECK(condition, message)
+
+#endif  // NDEBUG
+
+// Helper function to implement RAW_LOG and RAW_VLOG
+// Logs format... at "severity" level, reporting it
+// as called from file:line.
+// This does not allocate memory or acquire locks.
+void RawLog__(LogSeverity severity, const char* file, int line,
+              const char* format, ...)
+   @ac_cv___attribute___printf_4_5@;
+
+// Hack to propagate time information into this module so that
+// this module does not have to directly call localtime_r(),
+// which could allocate memory.
+extern "C" struct ::tm;
+void RawLog__SetLastTime(const struct ::tm& t);
+
+@ac_google_end_namespace@
+
+#endif  // BASE_RAW_LOGGING_H__
diff --git a/src/glog/stl_logging.h.in b/src/glog/stl_logging.h.in
new file mode 100644
index 0000000..ea91d8d
--- /dev/null
+++ b/src/glog/stl_logging.h.in
@@ -0,0 +1,128 @@
+// Copyright 2003 Google, Inc.
+// All Rights Reserved.
+//
+// Stream output operators for STL containers; to be used for logging *only*.
+// Inclusion of this file lets you do:
+//
+// list<string> x;
+// LOG(INFO) << "data: " << x;
+// vector<int> v1, v2;
+// CHECK_EQ(v1, v2);
+//
+// Note that if you want to use these operators from the non-global namespace,
+// you may get an error since they are not in namespace std (and they are not
+// in namespace std since that would result in undefined behavior). You may
+// need to write
+//
+//   using ::operator<<;
+//
+// to fix these errors.
+
+#ifndef UTIL_GTL_STL_LOGGING_INL_H_
+#define UTIL_GTL_STL_LOGGING_INL_H_
+
+#if !@ac_cv_cxx_using_operator@
+# error We do not support stl_logging for this compiler
+#endif
+
+#include <deque>
+#include <list>
+#include <map>
+#include <ostream>
+#include <set>
+#include <utility>
+#include <vector>
+
+#ifdef __GNUC__
+# include <ext/hash_set>
+# include <ext/hash_map>
+# include <ext/slist>
+#endif
+
+template<class First, class Second>
+inline std::ostream& operator<<(std::ostream& out,
+                                const std::pair<First, Second>& p) {
+  out << '(' << p.first << ", " << p.second << ')';
+  return out;
+}
+
+@ac_google_start_namespace@
+
+template<class Iter>
+inline void PrintSequence(std::ostream& out, Iter begin, Iter end) {
+  using ::operator<<;
+  // Output at most 100 elements -- appropriate if used for logging.
+  for (int i = 0; begin != end && i < 100; ++i, ++begin) {
+    if (i > 0) out << ' ';
+    out << *begin;
+  }
+  if (begin != end) {
+    out << " ...";
+  }
+}
+
+@ac_google_end_namespace@
+
+#define OUTPUT_TWO_ARG_CONTAINER(Sequence) \
+template<class T1, class T2> \
+inline std::ostream& operator<<(std::ostream& out, \
+                                const Sequence<T1, T2>& seq) { \
+  @ac_google_namespace@::PrintSequence(out, seq.begin(), seq.end()); \
+  return out; \
+}
+
+OUTPUT_TWO_ARG_CONTAINER(std::vector)
+OUTPUT_TWO_ARG_CONTAINER(std::deque)
+OUTPUT_TWO_ARG_CONTAINER(std::list)
+#ifdef __GNUC__
+OUTPUT_TWO_ARG_CONTAINER(__gnu_cxx::slist)
+#endif
+
+#undef OUTPUT_TWO_ARG_CONTAINER
+
+#define OUTPUT_THREE_ARG_CONTAINER(Sequence) \
+template<class T1, class T2, class T3> \
+inline std::ostream& operator<<(std::ostream& out, \
+                                const Sequence<T1, T2, T3>& seq) { \
+  @ac_google_namespace@::PrintSequence(out, seq.begin(), seq.end()); \
+  return out; \
+}
+
+OUTPUT_THREE_ARG_CONTAINER(std::set)
+OUTPUT_THREE_ARG_CONTAINER(std::multiset)
+
+#undef OUTPUT_THREE_ARG_CONTAINER
+
+#define OUTPUT_FOUR_ARG_CONTAINER(Sequence) \
+template<class T1, class T2, class T3, class T4> \
+inline std::ostream& operator<<(std::ostream& out, \
+                                const Sequence<T1, T2, T3, T4>& seq) { \
+  @ac_google_namespace@::PrintSequence(out, seq.begin(), seq.end()); \
+  return out; \
+}
+
+OUTPUT_FOUR_ARG_CONTAINER(std::map)
+OUTPUT_FOUR_ARG_CONTAINER(std::multimap)
+#ifdef __GNUC__
+OUTPUT_FOUR_ARG_CONTAINER(__gnu_cxx::hash_set)
+OUTPUT_FOUR_ARG_CONTAINER(__gnu_cxx::hash_multiset)
+#endif
+
+#undef OUTPUT_FOUR_ARG_CONTAINER
+
+#define OUTPUT_FIVE_ARG_CONTAINER(Sequence) \
+template<class T1, class T2, class T3, class T4, class T5> \
+inline std::ostream& operator<<(std::ostream& out, \
+                                const Sequence<T1, T2, T3, T4, T5>& seq) { \
+  @ac_google_namespace@::PrintSequence(out, seq.begin(), seq.end()); \
+  return out; \
+}
+
+#ifdef __GNUC__
+OUTPUT_FIVE_ARG_CONTAINER(__gnu_cxx::hash_map)
+OUTPUT_FIVE_ARG_CONTAINER(__gnu_cxx::hash_multimap)
+#endif
+
+#undef OUTPUT_FIVE_ARG_CONTAINER
+
+#endif  // UTIL_GTL_STL_LOGGING_INL_H_
diff --git a/src/glog/vlog_is_on.h.in b/src/glog/vlog_is_on.h.in
new file mode 100644
index 0000000..1a78d41
--- /dev/null
+++ b/src/glog/vlog_is_on.h.in
@@ -0,0 +1,89 @@
+// Copyright 1999, 2007 Google Inc. All Rights Reserved.
+// Author: Ray Sidney and many others
+//
+// Defines the VLOG_IS_ON macro that controls the variable-verbosity
+// conditional logging.
+//
+// It's used by VLOG and VLOG_IF in logging.h
+// and by RAW_VLOG in raw_logging.h to trigger the logging.
+//
+// It can also be used directly e.g. like this:
+//   if (VLOG_IS_ON(2)) {
+//     // do some logging preparation and logging
+//     // that can't be accomplished e.g. via just VLOG(2) << ...;
+//   }
+//
+// The truth value that VLOG_IS_ON(level) returns is determined by 
+// the three verbosity level flags:
+//   --v=<n>  Gives the default maximal active V-logging level;
+//            0 is the default.
+//            Normally positive values are used for V-logging levels.
+//   --vmodule=<str>  Gives the per-module maximal V-logging levels to override
+//                    the value given by --v.
+//                    E.g. "my_module=2,foo*=3" would change the logging level
+//                    for all code in source files "my_module.*" and "foo*.*"
+//                    ("-inl" suffixes are also disregarded for this matching).
+//
+// SetVLOGLevel helper function is provided to do limited dynamic control over
+// V-logging by overriding the per-module settings given via --vmodule flag.
+//
+// CAVEAT: --vmodule functionality is not available in non gcc compilers.
+//
+
+#ifndef BASE_VLOG_IS_ON_H_
+#define BASE_VLOG_IS_ON_H_
+
+#include "glog/log_severity.h"
+
+#if defined(__GNUC__)
+// We emit an anonymous static int* variable at every VLOG_IS_ON(n) site.
+// (Normally) the first time every VLOG_IS_ON(n) site is hit,
+// we determine what variable will dynamically control logging at this site:
+// it's either FLAGS_v or an appropriate internal variable
+// matching the current source file that represents results of
+// parsing of --vmodule flag and/or SetVLOGLevel calls.
+#define VLOG_IS_ON(verboselevel)                                \
+  ({ static @ac_google_namespace@::int32* vlocal__ = &@ac_google_namespace@::kLogSiteUninitialized;           \
+     @ac_google_namespace@::int32 verbose_level__ = (verboselevel);                    \
+     (*vlocal__ >= verbose_level__) &&                          \
+     ((vlocal__ != &@ac_google_namespace@::kLogSiteUninitialized) ||                   \
+      (@ac_google_namespace@::InitVLOG3__(&vlocal__, &FLAGS_v,                         \
+                   __FILE__, verbose_level__))); })
+#else
+// GNU extensions not available, so we do not support --vmodule.
+// Dynamic value of FLAGS_v always controls the logging level.
+#define VLOG_IS_ON(verboselevel) (FLAGS_v >= (verboselevel))
+#endif
+
+// Set VLOG(_IS_ON) level for module_pattern to log_level.
+// This lets us dynamically control what is normally set by the --vmodule flag.
+// Returns the level that previously applied to module_pattern.
+// NOTE: To change the log level for VLOG(_IS_ON) sites
+//	 that have already executed after/during InitGoogleLogging,
+//	 one needs to supply the exact --vmodule pattern that applied to them.
+//       (If no --vmodule pattern applied to them
+//       the value of FLAGS_v will continue to control them.)
+extern int SetVLOGLevel(const char* module_pattern, int log_level);
+
+// Various declarations needed for VLOG_IS_ON above: =========================
+
+// Special value used to indicate that a VLOG_IS_ON site has not been
+// initialized.  We make this a large value, so the common-case check
+// of "*vlocal__ >= verbose_level__" in VLOG_IS_ON definition
+// passes in such cases and InitVLOG3__ is then triggered.
+extern @ac_google_namespace@::int32 kLogSiteUninitialized;
+
+// Helper routine which determines the logging info for a particalur VLOG site.
+//   site_flag     is the address of the site-local pointer to the controlling
+//                 verbosity level
+//   site_default  is the default to use for *site_flag
+//   fname         is the current source file name
+//   verbose_level is the argument to VLOG_IS_ON
+// We will return the return value for VLOG_IS_ON
+// and if possible set *site_flag appropriately.
+extern bool InitVLOG3__(@ac_google_namespace@::int32** site_flag,
+                        @ac_google_namespace@::int32* site_default,
+                        const char* fname,
+                        @ac_google_namespace@::int32 verbose_level);
+
+#endif  // BASE_VLOG_IS_ON_H_
diff --git a/src/googletest.h b/src/googletest.h
new file mode 100644
index 0000000..503104f
--- /dev/null
+++ b/src/googletest.h
@@ -0,0 +1,483 @@
+#ifdef GOOGLETEST_H__
+#error You must not include this file twice.
+#endif
+#define GOOGLETEST_H__
+
+#include <ctype.h>
+#include <setjmp.h>
+#include <time.h>
+
+#include <map>
+#include <sstream>
+#include <string>
+#include <vector>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "base/commandlineflags.h"
+
+using std::map;
+using std::string;
+using std::vector;
+
+DEFINE_string(test_tmpdir, "/tmp", "Dir we use for temp files");
+DEFINE_string(test_srcdir, ".",
+              "Source-dir root, needed to find glog_unittest_flagfile");
+DEFINE_int32(benchmark_iters, 100000000, "Number of iterations per benchmark");
+
+_START_GOOGLE_NAMESPACE_
+
+extern void (*g_logging_fail_func)();
+
+// The following is some bare-bones testing infrastructure
+
+#define EXPECT_TRUE(cond)                               \
+  do {                                                  \
+    if (!(cond)) {                                      \
+      fprintf(stderr, "Check failed: %s\n", #cond);     \
+      exit(1);                                          \
+    }                                                   \
+  } while (0)
+
+#define EXPECT_FALSE(cond)  EXPECT_TRUE(!(cond))
+
+#define EXPECT_OP(op, val1, val2)                                       \
+  do {                                                                  \
+    if (!((val1) op (val2))) {                                          \
+      fprintf(stderr, "Check failed: %s %s %s\n", #val1, #op, #val2);   \
+      exit(1);                                                          \
+    }                                                                   \
+  } while (0)
+
+#define EXPECT_EQ(val1, val2)  EXPECT_OP(==, val1, val2)
+#define EXPECT_NE(val1, val2)  EXPECT_OP(!=, val1, val2)
+#define EXPECT_GT(val1, val2)  EXPECT_OP(>, val1, val2)
+#define EXPECT_LT(val1, val2)  EXPECT_OP(<, val1, val2)
+
+#define EXPECT_NAN(arg)                                         \
+  do {                                                          \
+    if (!isnan(arg)) {                                          \
+      fprintf(stderr, "Check failed: isnan(%s)\n", #arg);       \
+      exit(1);                                                  \
+    }                                                           \
+  } while (0)
+
+#define EXPECT_INF(arg)                                         \
+  do {                                                          \
+    if (!isinf(arg)) {                                          \
+      fprintf(stderr, "Check failed: isinf(%s)\n", #arg);       \
+      exit(1);                                                  \
+    }                                                           \
+  } while (0)
+
+#define EXPECT_DOUBLE_EQ(val1, val2)                                    \
+  do {                                                                  \
+    if (((val1) < (val2) - 0.001 || (val1) > (val2) + 0.001)) {         \
+      fprintf(stderr, "Check failed: %s == %s\n", #val1, #val2);        \
+      exit(1);                                                          \
+    }                                                                   \
+  } while (0)
+
+#define EXPECT_STREQ(val1, val2)                                        \
+  do {                                                                  \
+    if (strcmp((val1), (val2)) != 0) {                                  \
+      fprintf(stderr, "Check failed: streq(%s, %s)\n", #val1, #val2);   \
+      exit(1);                                                          \
+    }                                                                   \
+  } while (0)
+
+static bool g_called_abort;
+static jmp_buf g_jmp_buf;
+static void CalledAbort() {
+  g_called_abort = true;
+  longjmp(g_jmp_buf, 1);
+}
+
+#define ASSERT_DEATH(fn, msg)                                           \
+  do {                                                                  \
+    g_called_abort = false;                                             \
+    /* in logging.cc */                                                 \
+    void (*original_logging_fail_func)() = g_logging_fail_func;         \
+    g_logging_fail_func = &CalledAbort;                                 \
+    if (!setjmp(g_jmp_buf)) fn;                                         \
+    /* set back to their default */                                     \
+    g_logging_fail_func = original_logging_fail_func;                   \
+    if (!g_called_abort) {                                              \
+      fprintf(stderr, "Function didn't die (%s): %s\n", msg, #fn);      \
+      exit(1);                                                          \
+    }                                                                   \
+  } while (0)
+
+#ifdef NDEBUG
+#define ASSERT_DEBUG_DEATH(fn, msg)
+#else
+#define ASSERT_DEBUG_DEATH(fn, msg) ASSERT_DEATH(fn, msg)
+#endif  // NDEBUG
+
+vector<void (*)()> g_testlist;  // the tests to run
+
+#define TEST(a, b)                                      \
+  struct Test_##a##_##b {                               \
+    Test_##a##_##b() { g_testlist.push_back(&Run); }    \
+    static void Run() { FlagSaver fs; RunTest(); }      \
+    static void RunTest();                              \
+  };                                                    \
+  static Test_##a##_##b g_test_##a##_##b;               \
+  void Test_##a##_##b::RunTest()
+
+
+static int RUN_ALL_TESTS() {
+  vector<void (*)()>::const_iterator it;
+  for (it = g_testlist.begin(); it != g_testlist.end(); ++it) {
+    (*it)();
+  }
+  fprintf(stderr, "Passed %d tests\n\nPASS\n", (int)g_testlist.size());
+  return 0;
+}
+
+// Benchmark tools.
+
+#define BENCHMARK(n) static BenchmarkRegisterer __benchmark_ ## n (#n, &n);
+
+map<string, void (*)(int)> g_benchlist;  // the benchmarks to run
+
+class BenchmarkRegisterer {
+ public:
+  BenchmarkRegisterer(const char* name, void (*function)(int iters)) {
+    EXPECT_TRUE(g_benchlist.insert(std::make_pair(name, function)).second);
+  }
+};
+
+static void RunSpecifiedBenchmarks() {
+  int iter_cnt = FLAGS_benchmark_iters;
+  puts("Benchmark\tTime(ns)\tIterations");
+  for (map<string, void (*)(int)>::const_iterator iter = g_benchlist.begin();
+       iter != g_benchlist.end();
+       ++iter) {
+    clock_t start = clock();
+    iter->second(iter_cnt);
+    double elapsed_ns =
+        ((double)clock() - start) / CLOCKS_PER_SEC * 1000*1000*1000;
+    printf("%s\t%8.2lf\t%10d\n",
+           iter->first.c_str(), elapsed_ns / iter_cnt, iter_cnt);
+  }
+  puts("");
+}
+
+// ----------------------------------------------------------------------
+// Golden file functions
+// ----------------------------------------------------------------------
+
+class CapturedStream {
+ public:
+  CapturedStream(int fd, const string & filename) :
+    fd_(fd),
+    uncaptured_fd_(-1),
+    filename_(filename) {
+    Capture();
+  }
+
+  ~CapturedStream() {
+    if (uncaptured_fd_ != -1) {
+      CHECK(close(uncaptured_fd_) != -1);
+    }
+  }
+
+  // Start redirecting output to a file
+  void Capture() {
+    // Keep original stream for later
+    CHECK(uncaptured_fd_ == -1) << ", Stream " << fd_ << " already captured!";
+    uncaptured_fd_ = dup(fd_);
+    CHECK(uncaptured_fd_ != -1);
+
+    // Open file to save stream to
+    int cap_fd = open(filename_.c_str(),
+                      O_CREAT | O_TRUNC | O_WRONLY,
+                      S_IRUSR | S_IWUSR);
+    CHECK(cap_fd != -1);
+
+    // Send stdout/stderr to this file
+    fflush(NULL);
+    CHECK(dup2(cap_fd, fd_) != -1);
+    CHECK(close(cap_fd) != -1);
+  }
+
+  // Remove output redirection
+  void StopCapture() {
+    // Restore original stream
+    if (uncaptured_fd_ != -1) {
+      fflush(NULL);
+      CHECK(dup2(uncaptured_fd_, fd_) != -1);
+    }
+  }
+
+  const string & filename() const { return filename_; }
+
+ private:
+  int fd_;             // file descriptor being captured
+  int uncaptured_fd_;  // where the stream was originally being sent to
+  string filename_;    // file where stream is being saved
+};
+static CapturedStream * s_captured_streams[STDERR_FILENO+1];
+// Redirect a file descriptor to a file.
+//   fd       - Should be STDOUT_FILENO or STDERR_FILENO
+//   filename - File where output should be stored
+static void CaptureTestOutput(int fd, const string & filename) {
+  CHECK((fd == STDOUT_FILENO) || (fd == STDERR_FILENO));
+  CHECK(s_captured_streams[fd] == NULL);
+  s_captured_streams[fd] = new CapturedStream(fd, filename);
+}
+static void CaptureTestStderr() {
+  CaptureTestOutput(STDERR_FILENO, FLAGS_test_tmpdir + "/captured.err");
+}
+// Return the size (in bytes) of a file
+static size_t GetFileSize(FILE * file) {
+  fseek(file, 0, SEEK_END);
+  return static_cast<size_t>(ftell(file));
+}
+// Read the entire content of a file as a string
+static string ReadEntireFile(FILE * file) {
+  const size_t file_size = GetFileSize(file);
+  char * const buffer = new char[file_size];
+
+  size_t bytes_last_read = 0;  // # of bytes read in the last fread()
+  size_t bytes_read = 0;       // # of bytes read so far
+
+  fseek(file, 0, SEEK_SET);
+
+  // Keep reading the file until we cannot read further or the
+  // pre-determined file size is reached.
+  do {
+    bytes_last_read = fread(buffer+bytes_read, 1, file_size-bytes_read, file);
+    bytes_read += bytes_last_read;
+  } while (bytes_last_read > 0 && bytes_read < file_size);
+
+  const string content = string(buffer, buffer+bytes_read);
+  delete[] buffer;
+
+  return content;
+}
+// Get the captured stdout (when fd is STDOUT_FILENO) or stderr (when
+// fd is STDERR_FILENO) as a string
+static string GetCapturedTestOutput(int fd) {
+  CHECK(fd == STDOUT_FILENO || fd == STDERR_FILENO);
+  CapturedStream * const cap = s_captured_streams[fd];
+  CHECK(cap)
+    << ": did you forget CaptureTestStdout() or CaptureTestStderr()?";
+
+  // Make sure everything is flushed.
+  cap->StopCapture();
+
+  // Read the captured file.
+  FILE * const file = fopen(cap->filename().c_str(), "r");
+  const string content = ReadEntireFile(file);
+  fclose(file);
+
+  delete cap;
+  s_captured_streams[fd] = NULL;
+
+  return content;
+}
+// Get the captured stderr of a test as a string.
+static string GetCapturedTestStderr() {
+  return GetCapturedTestOutput(STDERR_FILENO);
+}
+
+// Check if the string is [IWEF](\d{4}|DATE)
+static bool IsLoggingPrefix(const string& s) {
+  if (s.size() != 5) return false;
+  if (!strchr("IWEF", s[0])) return false;
+  for (int i = 1; i <= 4; ++i) {
+    if (!isdigit(s[i]) && s[i] != "DATE"[i-1]) return false;
+  }
+  return true;
+}
+
+// Convert log output into normalized form.
+//
+// Example:
+//     I0102 030405 logging_unittest.cc:345] RAW: vlog -1
+//  => IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+static string MungeLine(const string& line) {
+  std::istringstream iss(line);
+  string before, logcode_date, time, thread_lineinfo;
+  iss >> logcode_date;
+  while (!IsLoggingPrefix(logcode_date)) {
+    before += " " + logcode_date;
+    if (iss.eof()) {
+      // We cannot find the header of log output.
+      return before;
+    }
+    iss >> logcode_date;
+  }
+  if (!before.empty()) before += " ";
+  iss >> time;
+  CHECK_EQ(6, time.size());
+  iss >> thread_lineinfo;
+  CHECK(!thread_lineinfo.empty());
+  if (thread_lineinfo[thread_lineinfo.size() - 1] != ']') {
+    // We found thread ID.
+    string tmp;
+    iss >> tmp;
+    CHECK(!tmp.empty());
+    CHECK_EQ(']', tmp[tmp.size() - 1]);
+    thread_lineinfo = "THREADID " + tmp;
+  }
+  size_t index = thread_lineinfo.find(':');
+  CHECK_NE(string::npos, index);
+  thread_lineinfo = thread_lineinfo.substr(0, index+1) + "LINE]";
+  string rest;
+  std::getline(iss, rest);
+  return (before + logcode_date[0] + "DATE TIME__ " + thread_lineinfo +
+          MungeLine(rest));
+}
+
+static void StringReplace(string* str,
+                          const string& oldsub,
+                          const string& newsub) {
+  size_t pos = str->find(oldsub);
+  if (pos != string::npos) {
+    str->replace(pos, oldsub.size(), newsub.c_str());
+  }
+}
+
+static string Munge(const string& filename) {
+  FILE* fp = fopen(filename.c_str(), "rb");
+  CHECK(fp != NULL) << filename << ": couldn't open";
+  char buf[4096];
+  string result;
+  while (fgets(buf, 4095, fp)) {
+    string line = MungeLine(buf);
+    char null_str[256];
+    sprintf(null_str, "%p", NULL);
+    StringReplace(&line, "__NULLP__", null_str);
+
+    char errmsg_buf[100];
+    posix_strerror_r(0, errmsg_buf, sizeof(errmsg_buf));
+    if (*errmsg_buf == '\0') {
+      // MacOSX 10.4 and FreeBSD return empty string for errno=0.
+      // In such case, the we need to remove an extra space.
+      StringReplace(&line, "__SUCCESS__ ", "");
+    } else {
+      StringReplace(&line, "__SUCCESS__", errmsg_buf);
+    }
+    StringReplace(&line, "__ENOENT__", strerror(ENOENT));
+    StringReplace(&line, "__EINTR__", strerror(EINTR));
+    StringReplace(&line, "__ENXIO__", strerror(ENXIO));
+    StringReplace(&line, "__ENOEXEC__", strerror(ENOEXEC));
+    result += line + "\n";
+  }
+  fclose(fp);
+  return result;
+}
+
+static void WriteToFile(const string& body, const string& file) {
+  FILE* fp = fopen(file.c_str(), "wb");
+  fwrite(body.data(), 1, body.size(), fp);
+  fclose(fp);
+}
+
+static bool MungeAndDiffTestStderr(const string& golden_filename) {
+  CapturedStream* cap = s_captured_streams[STDERR_FILENO];
+  CHECK(cap) << ": did you forget CaptureTestStderr()?";
+
+  cap->StopCapture();
+
+  // Run munge
+  const string captured = Munge(cap->filename());
+  const string golden = Munge(golden_filename);
+  if (captured != golden) {
+    fprintf(stderr,
+            "Test with golden file failed. We'll try to show the diff:\n");
+    string munged_golden = golden_filename + ".munged";
+    WriteToFile(golden, munged_golden);
+    string munged_captured = cap->filename() + ".munged";
+    WriteToFile(captured, munged_captured);
+    string diffcmd("diff -u " + munged_golden + " " + munged_captured);
+    if (system(diffcmd.c_str()) != 0) {
+      fprintf(stderr, "diff command was failed.\n");
+    }
+    unlink(munged_golden.c_str());
+    unlink(munged_captured.c_str());
+    return false;
+  }
+  LOG(INFO) << "Diff was successful";
+  return true;
+}
+
+// Save flags used from logging_unittest.cc.
+#ifndef HAVE_LIB_GFLAGS
+struct FlagSaver {
+  FlagSaver()
+      : v_(FLAGS_v),
+        stderrthreshold_(FLAGS_stderrthreshold),
+        logtostderr_(FLAGS_logtostderr),
+        alsologtostderr_(FLAGS_alsologtostderr) {}
+  ~FlagSaver() {
+    FLAGS_v = v_;
+    FLAGS_stderrthreshold = stderrthreshold_;
+    FLAGS_logtostderr = logtostderr_;
+    FLAGS_alsologtostderr = alsologtostderr_;
+  }
+  int v_;
+  int stderrthreshold_;
+  bool logtostderr_;
+  bool alsologtostderr_;
+};
+#endif
+
+// TODO(hamaji): Make it portable.
+class Thread {
+ public:
+  void SetJoinable(bool joinable) {}
+  void Start() {
+    pthread_create(&th_, NULL, &Thread::InvokeThread, this);
+  }
+  void Join() {
+    pthread_join(th_, NULL);
+  }
+
+ protected:
+  virtual void Run() = 0;
+
+ private:
+  static void* InvokeThread(void* self) {
+    ((Thread*)self)->Run();
+    return NULL;
+  }
+
+  pthread_t th_;
+};
+
+// TODO(hamaji): Make it portable.
+static void SleepForMilliseconds(int t) {
+  usleep(t * 1000);
+}
+
+// Add hook for operator new to ensure there are no memory allocation.
+
+void (*g_new_hook)() = NULL;
+
+_END_GOOGLE_NAMESPACE_
+
+void* operator new(size_t size) {
+  if (GOOGLE_NAMESPACE::g_new_hook) {
+    GOOGLE_NAMESPACE::g_new_hook();
+  }
+  return malloc(size);
+}
+
+void* operator new[](size_t size) {
+  return ::operator new(size);
+}
+
+void operator delete(void* p) {
+  free(p);
+}
+
+void operator delete[](void* p) {
+  ::operator delete(p);
+}
diff --git a/src/logging.cc b/src/logging.cc
new file mode 100644
index 0000000..06516fb
--- /dev/null
+++ b/src/logging.cc
@@ -0,0 +1,1592 @@
+#define _GNU_SOURCE 1 // needed for O_NOFOLLOW and pread()/pwrite()
+
+#include "utilities.h"
+
+#include <assert.h>
+#include <pthread.h>
+#include <iomanip>
+#include <string>
+#include <unistd.h>
+#include <climits>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/utsname.h>
+#include <fcntl.h>
+#include <cstdio>
+#include <iostream>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <pwd.h>
+#include <syslog.h>
+#include <vector>
+#include <errno.h>                   // for errno
+#include <sstream>
+#include "base/commandlineflags.h"        // to get the program name
+#include "glog/logging.h"
+#include "glog/raw_logging.h"
+#include "base/googleinit.h"
+
+using std::string;
+using std::vector;
+using std::ostrstream;
+using std::setw;
+using std::hex;
+using std::dec;
+using std::min;
+using std::ostream;
+using std::ostringstream;
+using std::strstream;
+
+DEFINE_bool(logtostderr, false,
+            "log messages go to stderr instead of logfiles");
+DEFINE_bool(alsologtostderr, false,
+            "log messages go to stderr in addition to logfiles");
+
+// By default, errors (including fatal errors) get logged to stderr as
+// well as the file.
+//
+// The default is ERROR instead of FATAL so that users can see problems
+// when they run a program without having to look in another file.
+DEFINE_int32(stderrthreshold,
+             GOOGLE_NAMESPACE::ERROR,
+             "log messages at or above this level are copied to stderr in "
+             "addition to logfiles.  This flag obsoletes --alsologtostderr.");
+
+DEFINE_string(alsologtoemail, "",
+              "log messages go to these email addresses "
+              "in addition to logfiles");
+DEFINE_bool(log_prefix, true,
+            "Prepend the log prefix to the start of each log line");
+DEFINE_int32(minloglevel, 0, "Messages logged at a lower level than this don't "
+             "actually get logged anywhere");
+DEFINE_int32(logbuflevel, 0,
+             "Buffer log messages logged at this level or lower"
+             " (-1 means don't buffer; 0 means buffer INFO only;"
+             " ...)");
+DEFINE_int32(logbufsecs, 30,
+             "Buffer log messages for at most this many seconds");
+DEFINE_int32(logemaillevel, 999,
+             "Email log messages logged at this level or higher"
+             " (0 means email all; 3 means email FATAL only;"
+             " ...)");
+DEFINE_string(logmailer, "/bin/mail",
+              "Mailer used to send logging email");
+
+// Compute the default value for --log_dir
+static const char* DefaultLogDir() {
+  const char* env;
+  env = getenv("GOOGLE_LOG_DIR");
+  if (env != NULL && env[0] != '\0') {
+    return env;
+  }
+  env = getenv("TEST_TMPDIR");
+  if (env != NULL && env[0] != '\0') {
+    return env;
+  }
+  return "";
+}
+
+DEFINE_string(log_dir, DefaultLogDir(),
+              "If specified, logfiles are written into this directory instead "
+              "of the default logging directory.");
+DEFINE_string(log_link, "", "Put additional links to the log "
+              "files in this directory");
+
+DEFINE_int32(max_log_size, 1800,
+             "approx. maximum log file size (in MB)");
+
+DEFINE_bool(stop_logging_if_full_disk, false,
+            "Stop attempting to log to disk if the disk is full.");
+
+// TODO(hamaji): consider windows
+#define PATH_SEPARATOR '/'
+
+_START_GOOGLE_NAMESPACE_
+
+// A mutex that allows only one thread to log at a time, to keep things from
+// getting jumbled.  Some other very uncommon logging operations (like
+// changing the destination file for log messages of a given severity) also
+// lock this mutex.  Please be sure that anybody who might possibly need to
+// lock it does so.
+static Mutex log_mutex;
+
+// Number of messages sent at each severity.  Under log_mutex.
+int64 LogMessage::num_messages_[NUM_SEVERITIES] = {0, 0, 0, 0};
+
+// Globally disable log writing (if disk is full)
+static bool stop_writing = false;
+
+const char*const LogSeverityNames[NUM_SEVERITIES] = {
+  "INFO", "WARNING", "ERROR", "FATAL"
+};
+
+const char* GetLogSeverityName(LogSeverity severity) {
+  return LogSeverityNames[severity];
+}
+
+static bool SendEmailInternal(const char*dest, const char *subject,
+                              const char*body, bool use_logging);
+
+base::Logger::~Logger() {
+}
+
+// Encapsulates all file-system related state
+class LogFileObject : public base::Logger {
+ public:
+  LogFileObject(LogSeverity severity, const char* base_filename);
+  ~LogFileObject();
+
+  virtual void Write(bool force_flush, // Should we force a flush here?
+                     time_t timestamp,  // Timestamp for this entry
+                     const char* message,
+                     int message_len);
+
+  // Configuration options
+  void SetBasename(const char* basename);
+  void SetExtension(const char* ext);
+  void SetSymlinkBasename(const char* symlink_basename);
+
+  // Normal flushing routine
+  virtual void Flush();
+
+  // It is the actual file length for the system loggers,
+  // i.e., INFO, ERROR, etc.
+  virtual uint32 LogSize() {
+    MutexLock l(&lock_);
+    return file_length_;
+  }
+
+  // Internal flush routine.  Exposed so that FlushLogFilesUnsafe()
+  // can avoid grabbing a lock.  Usually Flush() calls it after
+  // acquiring lock_.
+  void FlushUnlocked();
+
+ private:
+  static const uint32 kRolloverAttemptFrequency = 0x20;
+
+  Mutex lock_;
+  bool base_filename_selected_;
+  string base_filename_;
+  string symlink_basename_;
+  string filename_extension_;     // option users can specify (eg to add port#)
+  FILE* file_;
+  LogSeverity severity_;
+  uint32 bytes_since_flush_;
+  uint32 file_length_;
+  unsigned int rollover_attempt_;
+  int64 next_flush_time_;         // cycle count at which to flush log
+
+  // Actually create a logfile using the value of base_filename_ and the
+  // supplied argument time_pid_string
+  // REQUIRES: lock_ is held
+  bool CreateLogfile(const char* time_pid_string);
+};
+
+LogFileObject::LogFileObject(LogSeverity severity,
+                             const char* base_filename)
+  : base_filename_selected_(base_filename != NULL),
+    base_filename_((base_filename != NULL) ? base_filename : ""),
+    symlink_basename_(ProgramInvocationShortName()),
+    filename_extension_(),
+    file_(NULL),
+    severity_(severity),
+    bytes_since_flush_(0),
+    file_length_(0),
+    rollover_attempt_(kRolloverAttemptFrequency-1),
+    next_flush_time_(0) {
+  assert(severity >= 0);
+  assert(severity < NUM_SEVERITIES);
+}
+
+LogFileObject::~LogFileObject() {
+  MutexLock l(&lock_);
+  if (file_ != NULL) {
+    fclose(file_);
+    file_ = NULL;
+  }
+}
+
+void LogFileObject::SetBasename(const char* basename) {
+  MutexLock l(&lock_);
+  base_filename_selected_ = true;
+  if (base_filename_ != basename) {
+    // Get rid of old log file since we are changing names
+    if (file_ != NULL) {
+      fclose(file_);
+      file_ = NULL;
+      rollover_attempt_ = kRolloverAttemptFrequency-1;
+    }
+    base_filename_ = basename;
+  }
+}
+
+void LogFileObject::SetExtension(const char* ext) {
+  MutexLock l(&lock_);
+  if (filename_extension_ != ext) {
+    // Get rid of old log file since we are changing names
+    if (file_ != NULL) {
+      fclose(file_);
+      file_ = NULL;
+      rollover_attempt_ = kRolloverAttemptFrequency-1;
+    }
+    filename_extension_ = ext;
+  }
+}
+
+void LogFileObject::SetSymlinkBasename(const char* symlink_basename) {
+  MutexLock l(&lock_);
+  symlink_basename_ = symlink_basename;
+}
+
+class LogDestination {
+ public:
+  friend class LogMessage;
+  friend void ReprintFatalMessage();
+  friend base::Logger* base::GetLogger(LogSeverity);
+  friend void base::SetLogger(LogSeverity, base::Logger*);
+
+  // These methods are just forwarded to by their global versions.
+  static void SetLogDestination(LogSeverity severity,
+				const char* base_filename);
+  static void SetLogSymlink(LogSeverity severity,
+                            const char* symlink_basename);
+  static void AddLogSink(LogSink *destination);
+  static void RemoveLogSink(LogSink *destination);
+  static void SetLogFilenameExtension(const char* filename_extension);
+  static void SetStderrLogging(LogSeverity min_severity);
+  static void SetEmailLogging(LogSeverity min_severity, const char* addresses);
+  static void LogToStderr();
+  // Flush all log files that are at least at the given severity level
+  static void FlushLogFiles(int min_severity);
+  static void FlushLogFilesUnsafe(int min_severity);
+
+  // we set the maximum size of our packet to be 1400, the logic being
+  // to prevent fragmentation.
+  // Really this number is arbitrary.
+  static const int kNetworkBytes = 1400;
+
+  static const string& hostname();
+ private:
+
+  LogDestination(LogSeverity severity, const char* base_filename);
+  ~LogDestination() { }
+
+  // Take a log message of a particular severity and log it to stderr
+  // iff it's of a high enough severity to deserve it.
+  static void MaybeLogToStderr(LogSeverity severity, const char* message,
+			       size_t len);
+
+  // Take a log message of a particular severity and log it to email
+  // iff it's of a high enough severity to deserve it.
+  static void MaybeLogToEmail(LogSeverity severity, const char* message,
+			      size_t len);
+  // Take a log message of a particular severity and log it to a file
+  // iff the base filename is not "" (which means "don't log to me")
+  static void MaybeLogToLogfile(LogSeverity severity,
+                                time_t timestamp,
+				const char* message, size_t len);
+  // Take a log message of a particular severity and log it to the file
+  // for that severity and also for all files with severity less than
+  // this severity.
+  static void LogToAllLogfiles(LogSeverity severity,
+                               time_t timestamp,
+                               const char* message, size_t len);
+
+  // Send logging info to all registered sinks.
+  static void LogToSinks(LogSeverity severity,
+                         const char *full_filename,
+                         const char *base_filename,
+                         int line,
+                         const struct ::tm* tm_time,
+                         const char* message,
+                         size_t message_len);
+
+  // Wait for all registered sinks via WaitTillSent
+  // including the optional one in "data".
+  static void WaitForSinks(LogMessage::LogMessageData* data);
+
+  static LogDestination* log_destination(LogSeverity severity);
+
+  LogFileObject fileobject_;
+  base::Logger* logger_;      // Either &fileobject_, or wrapper around it
+
+  static LogDestination* log_destinations_[NUM_SEVERITIES];
+  static LogSeverity email_logging_severity_;
+  static string addresses_;
+  static string hostname_;
+
+  // arbitrary global logging destinations.
+  static vector<LogSink*>* sinks_;
+
+  // Protects the vector sinks_,
+  // but not the LogSink objects its elements reference.
+  static Mutex sink_mutex_;
+
+  // Disallow
+  LogDestination(const LogDestination&);
+  LogDestination& operator=(const LogDestination&);
+};
+
+// Errors do not get logged to email by default.
+LogSeverity LogDestination::email_logging_severity_ = 99999;
+
+string LogDestination::addresses_ = "";
+string LogDestination::hostname_ = "";
+
+vector<LogSink*>* LogDestination::sinks_ = NULL;
+Mutex LogDestination::sink_mutex_;
+
+/* static */
+const string& LogDestination::hostname() {
+  if (hostname_.empty()) {
+    struct utsname buf;
+    if (0 == uname(&buf)) {
+      hostname_ = buf.nodename;
+    } else {
+      hostname_ = "(unknown)";
+    }
+  }
+  return hostname_;
+}
+
+LogDestination::LogDestination(LogSeverity severity,
+                               const char* base_filename)
+  : fileobject_(severity, base_filename),
+    logger_(&fileobject_) {
+}
+
+void LogFileObject::Flush() {
+  MutexLock l(&lock_);
+  FlushUnlocked();
+}
+
+void LogFileObject::FlushUnlocked(){
+  if (file_ != NULL) {
+    fflush(file_);
+    bytes_since_flush_ = 0;
+  }
+  // Figure out when we are due for another flush.
+  const int64 next = (FLAGS_logbufsecs
+                      * static_cast<int64>(1000000));  // in usec
+  next_flush_time_ = CycleClock_Now() + UsecToCycles(next);
+}
+
+inline void LogDestination::FlushLogFilesUnsafe(int min_severity) {
+  // assume we have the log_mutex or we simply don't care
+  // about it
+  for (int i = min_severity; i < NUM_SEVERITIES; i++) {
+    LogDestination* log = log_destination(i);
+    if (log != NULL) {
+      // Flush the base fileobject_ logger directly instead of going
+      // through any wrappers to reduce chance of deadlock.
+      log->fileobject_.FlushUnlocked();
+    }
+  }
+}
+
+inline void LogDestination::FlushLogFiles(int min_severity) {
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // all this stuff.
+  MutexLock l(&log_mutex);
+  for (int i = min_severity; i < NUM_SEVERITIES; i++) {
+    LogDestination* log = log_destination(i);
+    if (log != NULL) {
+      log->logger_->Flush();
+    }
+  }
+}
+
+inline void LogDestination::SetLogDestination(LogSeverity severity,
+					      const char* base_filename) {
+  assert(severity >= 0 && severity < NUM_SEVERITIES);
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // all this stuff.
+  MutexLock l(&log_mutex);
+  log_destination(severity)->fileobject_.SetBasename(base_filename);
+}
+
+inline void LogDestination::SetLogSymlink(LogSeverity severity,
+                                          const char* symlink_basename) {
+  CHECK_GE(severity, 0);
+  CHECK_LT(severity, NUM_SEVERITIES);
+  MutexLock l(&log_mutex);
+  log_destination(severity)->fileobject_.SetSymlinkBasename(symlink_basename);
+}
+
+inline void LogDestination::AddLogSink(LogSink *destination) {
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // all this stuff.
+  MutexLock l(&sink_mutex_);
+  if (!sinks_)  sinks_ = new vector<LogSink*>;
+  sinks_->push_back(destination);
+}
+
+inline void LogDestination::RemoveLogSink(LogSink *destination) {
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // all this stuff.
+  MutexLock l(&sink_mutex_);
+  // This doesn't keep the sinks in order, but who cares?
+  if (sinks_) {
+    for (int i = sinks_->size() - 1; i >= 0; i--) {
+      if ((*sinks_)[i] == destination) {
+        (*sinks_)[i] = (*sinks_)[sinks_->size() - 1];
+        sinks_->pop_back();
+        break;
+      }
+    }
+  }
+}
+
+inline void LogDestination::SetLogFilenameExtension(const char* ext) {
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // all this stuff.
+  MutexLock l(&log_mutex);
+  for ( int severity = 0; severity < NUM_SEVERITIES; ++severity ) {
+    log_destination(severity)->fileobject_.SetExtension(ext);
+  }
+}
+
+inline void LogDestination::SetStderrLogging(LogSeverity min_severity) {
+  assert(min_severity >= 0 && min_severity < NUM_SEVERITIES);
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // all this stuff.
+  MutexLock l(&log_mutex);
+  FLAGS_stderrthreshold = min_severity;
+}
+
+inline void LogDestination::LogToStderr() {
+  // *Don't* put this stuff in a mutex lock, since SetStderrLogging &
+  // SetLogDestination already do the locking!
+  SetStderrLogging(0);            // thus everything is "also" logged to stderr
+  for ( int i = 0; i < NUM_SEVERITIES; ++i ) {
+    SetLogDestination(i, "");     // "" turns off logging to a logfile
+  }
+}
+
+inline void LogDestination::SetEmailLogging(LogSeverity min_severity,
+					    const char* addresses) {
+  assert(min_severity >= 0 && min_severity < NUM_SEVERITIES);
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // all this stuff.
+  MutexLock l(&log_mutex);
+  LogDestination::email_logging_severity_ = min_severity;
+  LogDestination::addresses_ = addresses;
+}
+
+static void WriteToStderr(const char* message, size_t len) {
+  // Avoid using cerr from this module since we may get called during
+  // exit code, and cerr may be partially or fully destroyed by then.
+  fwrite(message, len, 1, stderr);
+}
+
+inline void LogDestination::MaybeLogToStderr(LogSeverity severity,
+					     const char* message, size_t len) {
+  if ((severity >= FLAGS_stderrthreshold) || FLAGS_alsologtostderr) {
+    WriteToStderr(message, len);
+#ifdef OS_WINDOWS
+    // On Windows, also output to the debugger
+    ::OutputDebugStringA(string(message,len).c_str());
+#endif
+  }
+}
+
+
+inline void LogDestination::MaybeLogToEmail(LogSeverity severity,
+					    const char* message, size_t len) {
+  if (severity >= email_logging_severity_ ||
+      severity >= FLAGS_logemaillevel) {
+    string to(FLAGS_alsologtoemail);
+    if (!addresses_.empty()) {
+      if (!to.empty()) {
+        to += ",";
+      }
+      to += addresses_;
+    }
+    const string subject(string("[LOG] ") + LogSeverityNames[severity] + ": " +
+                         ProgramInvocationShortName());
+    string body(hostname());
+    body += "\n\n";
+    body.append(message, len);
+
+    // should NOT use SendEmail().  The caller of this function holds the
+    // log_mutex and SendEmail() calls LOG/VLOG which will block trying to
+    // acquire the log_mutex object.  Use SendEmailInternal() and set
+    // use_logging to false.
+    SendEmailInternal(to.c_str(), subject.c_str(), body.c_str(), false);
+  }
+}
+
+
+inline void LogDestination::MaybeLogToLogfile(LogSeverity severity,
+                                              time_t timestamp,
+					      const char* message,
+					      size_t len) {
+  const bool should_flush = severity > FLAGS_logbuflevel;
+  LogDestination* destination = log_destination(severity);
+  destination->logger_->Write(should_flush, timestamp, message, len);
+}
+
+inline void LogDestination::LogToAllLogfiles(LogSeverity severity,
+                                             time_t timestamp,
+                                             const char* message,
+                                             size_t len) {
+
+  if ( FLAGS_logtostderr )            // global flag: never log to file
+    WriteToStderr(message, len);
+  else
+    for (int i = severity; i >= 0; --i)
+      LogDestination::MaybeLogToLogfile(i, timestamp, message, len);
+
+}
+
+inline void LogDestination::LogToSinks(LogSeverity severity,
+                                       const char *full_filename,
+                                       const char *base_filename,
+                                       int line,
+                                       const struct ::tm* tm_time,
+                                       const char* message,
+                                       size_t message_len) {
+  ReaderMutexLock l(&sink_mutex_);
+  if (sinks_) {
+    for (int i = sinks_->size() - 1; i >= 0; i--) {
+      (*sinks_)[i]->send(severity, full_filename, base_filename,
+                         line, tm_time, message, message_len);
+    }
+  }
+}
+
+inline void LogDestination::WaitForSinks(LogMessage::LogMessageData* data) {
+  ReaderMutexLock l(&sink_mutex_);
+  if (sinks_) {
+    for (int i = sinks_->size() - 1; i >= 0; i--) {
+      (*sinks_)[i]->WaitTillSent();
+    }
+  }
+  if (data->send_method_ == &LogMessage::SendToSinkAndLog &&
+      data->sink_ != NULL) {
+    data->sink_->WaitTillSent();
+  }
+}
+
+bool LogFileObject::CreateLogfile(const char* time_pid_string) {
+  string string_filename = base_filename_+filename_extension_+
+                           time_pid_string;
+  const char* filename = string_filename.c_str();
+  int fd = open(filename, O_WRONLY | O_CREAT | O_EXCL, 0664);
+  if (fd == -1) return false;
+  // Mark the file close-on-exec. We don't really care if this fails
+  fcntl(fd, F_SETFD, FD_CLOEXEC);
+
+  file_ = fdopen(fd, "a");  // Make a FILE*.
+  if (file_ == NULL) {  // Man, we're screwed!
+    close(fd);
+    unlink(filename);  // Erase the half-baked evidence: an unusable log file
+    return false;
+  }
+
+  // We try to create a symlink called <program_name>.<severity>,
+  // which is easier to use.  (Every time we create a new logfile,
+  // we destroy the old symlink and create a new one, so it always
+  // points to the latest logfile.)  If it fails, we're sad but it's
+  // no error.
+  if (!symlink_basename_.empty()) {
+    // take directory from filename
+    const char* slash = strrchr(filename, PATH_SEPARATOR);
+    const string linkname =
+      symlink_basename_ + '.' + LogSeverityNames[severity_];
+    string linkpath;
+    if ( slash ) linkpath = string(filename, slash-filename+1);  // get dirname
+    linkpath += linkname;
+    unlink(linkpath.c_str());                    // delete old one if it exists
+
+    // Make the symlink be relative (in the same dir) so that if the
+    // entire log directory gets relocated the link is still valid.
+    const char *linkdest = slash ? (slash + 1) : filename;
+    symlink(linkdest, linkpath.c_str());         // silently ignore failures
+
+    // Make an additional link to the log file in a place specified by
+    // FLAGS_log_link, if indicated
+    if (!FLAGS_log_link.empty()) {
+      linkpath = FLAGS_log_link + "/" + linkname;
+      unlink(linkpath.c_str());                  // delete old one if it exists
+      symlink(filename, linkpath.c_str());       // silently ignore failures
+    }
+  }
+
+  return true;  // Everything worked
+}
+
+void LogFileObject::Write(bool force_flush,
+                          time_t timestamp,
+                          const char* message,
+                          int message_len) {
+  MutexLock l(&lock_);
+
+  // We don't log if the base_name_ is "" (which means "don't write")
+  if (base_filename_selected_ && base_filename_.empty()) {
+    return;
+  }
+
+  if ((file_length_ >> 20) >= FLAGS_max_log_size) {
+    fclose(file_);
+    file_ = NULL;
+    file_length_ = bytes_since_flush_ = 0;
+    rollover_attempt_ = kRolloverAttemptFrequency-1;
+  }
+
+  // If there's no destination file, make one before outputting
+  if (file_ == NULL) {
+    // Try to rollover the log file every 32 log messages.  The only time
+    // this could matter would be when we have trouble creating the log
+    // file.  If that happens, we'll lose lots of log messages, of course!
+    if (++rollover_attempt_ != kRolloverAttemptFrequency) return;
+    rollover_attempt_ = 0;
+
+    struct ::tm tm_time;
+    localtime_r(&timestamp, &tm_time);
+
+    // The logfile's filename will have the date/time & pid in it
+    char time_pid_string[256];  // More than enough chars for time, pid, \0
+    ostrstream time_pid_stream(time_pid_string, sizeof(time_pid_string));
+    time_pid_stream.fill('0');
+    time_pid_stream << 1900+tm_time.tm_year
+		    << setw(2) << 1+tm_time.tm_mon
+		    << setw(2) << tm_time.tm_mday
+		    << '-'
+		    << setw(2) << tm_time.tm_hour
+		    << setw(2) << tm_time.tm_min
+		    << setw(2) << tm_time.tm_sec
+		    << '.'
+		    << GetMainThreadPid()
+		    << '\0';
+
+    if (base_filename_selected_) {
+      if (!CreateLogfile(time_pid_string)) {
+        perror("Could not create log file");
+        fprintf(stderr, "COULD NOT CREATE LOGFILE '%s'!\n", time_pid_string);
+        return;
+      }
+    } else {
+      // If no base filename for logs of this severity has been set, use a
+      // default base filename of
+      // "<program name>.<hostname>.<user name>.log.<severity level>.".  So
+      // logfiles will have names like
+      // webserver.examplehost.root.log.INFO.19990817-150000.4354, where
+      // 19990817 is a date (1999 August 17), 150000 is a time (15:00:00),
+      // and 4354 is the pid of the logging process.  The date & time reflect
+      // when the file was created for output.
+      //
+      // Where does the file get put?  Successively try the directories
+      // "/tmp", and "."
+      string stripped_filename(ProgramInvocationShortName());  // in cmdlineflag
+      struct utsname buf;
+      if (0 != uname(&buf)) {
+        *buf.nodename = '\0';  // ensure null termination on failure
+      }
+
+      string uidname = MyUserName();
+      // We should not call CHECK() here because this function can be
+      // called after holding on to log_mutex. We don't want to
+      // attempt to hold on to the same mutex, and get into a
+      // deadlock. Simply use a name like invalid-user.
+      if (uidname.empty()) uidname = "invalid-user";
+
+      stripped_filename = stripped_filename+'.'+buf.nodename+'.'
+                          +uidname+".log."
+                          +LogSeverityNames[severity_]+'.';
+      // We're going to (potentially) try to put logs in several different dirs
+      const vector<string> & log_dirs = GetLoggingDirectories();
+
+      // Go through the list of dirs, and try to create the log file in each
+      // until we succeed or run out of options
+      bool success = false;
+      for (vector<string>::const_iterator dir = log_dirs.begin();
+           dir != log_dirs.end();
+           ++dir) {
+        base_filename_ = *dir + "/" + stripped_filename;
+        if ( CreateLogfile(time_pid_string) ) {
+          success = true;
+          break;
+        }
+      }
+      // If we never succeeded, we have to give up
+      if ( success == false ) {
+        perror("Could not create logging file");
+        fprintf(stderr, "COULD NOT CREATE A LOGGINGFILE %s!", time_pid_string);
+        return;
+      }
+    }
+
+    // Write a header message into the log file
+    char file_header_string[512];  // Enough chars for time and binary info
+    ostrstream file_header_stream(file_header_string,
+                                  sizeof(file_header_string));
+    file_header_stream.fill('0');
+    file_header_stream << "Log file created at: "
+                       << 1900+tm_time.tm_year << '/'
+                       << setw(2) << 1+tm_time.tm_mon << '/'
+                       << setw(2) << tm_time.tm_mday
+                       << ' '
+                       << setw(2) << tm_time.tm_hour << ':'
+                       << setw(2) << tm_time.tm_min << ':'
+                       << setw(2) << tm_time.tm_sec << '\n'
+                       << "Running on machine: "
+                       << LogDestination::hostname() << '\n'
+                       << '\0';
+    int header_len = strlen(file_header_string);
+    fwrite(file_header_string, 1, header_len, file_);
+    file_length_ += header_len;
+    bytes_since_flush_ += header_len;
+  }
+
+  // Write to LOG file
+  if ( !stop_writing ) {
+    // fwrite() doesn't return an error when the disk is full, for
+    // messages that are less than 4096 bytes. When the disk is full,
+    // it returns the message length for messages that are less than
+    // 4096 bytes. fwrite() returns 4096 for message lengths that are
+    // greater than 4096, thereby indicating an error.
+    errno = 0;
+    fwrite(message, 1, message_len, file_);
+    if ( FLAGS_stop_logging_if_full_disk &&
+         errno == ENOSPC ) {  // disk full, stop writing to disk
+      stop_writing = true;  // until the disk is
+      return;
+    } else {
+      file_length_ += message_len;
+      bytes_since_flush_ += message_len;
+    }
+  } else {
+    if ( CycleClock_Now() >= next_flush_time_ )
+      stop_writing = false;  // check to see if disk has free space.
+    return;  // no need to flush
+  }
+
+  // See important msgs *now*.  Also, flush logs at least every 10^6 chars,
+  // or every "FLAGS_logbufsecs" seconds.
+  if ( force_flush ||
+       (bytes_since_flush_ >= 1000000) ||
+       (CycleClock_Now() >= next_flush_time_) ) {
+    FlushUnlocked();
+  }
+}
+
+LogDestination* LogDestination::log_destinations_[NUM_SEVERITIES];
+
+inline LogDestination* LogDestination::log_destination(LogSeverity severity) {
+  assert(severity >=0 && severity < NUM_SEVERITIES);
+  if (!log_destinations_[severity]) {
+    log_destinations_[severity] = new LogDestination(severity, NULL);
+  }
+  return log_destinations_[severity];
+}
+
+// Get the part of filepath after the last path separator.
+// (Doesn't modify filepath, contrary to basename() in libgen.h.)
+static const char* const_basename(const char* filepath) {
+  const char* base = strrchr(filepath, '/');
+#ifdef OS_WINDOWS  // Look for either path separator in Windows
+  if (!base)
+    base = strrchr(filepath, '\\');
+#endif
+  return base ? (base+1) : filepath;
+}
+
+//
+// LogMessage's constructor starts each message with a string like:
+// I1018 160715 logging.cc:1153]
+// (1st letter of severity level, GMT month, date, & time;
+// thread id (if not 0x400); basename of file and line of the logging command)
+// We ignore thread id 0x400 because it seems to be the default for single-
+// threaded programs.
+
+// An arbitrary limit on the length of a single log message.  This
+// is so that streaming can be done more efficiently.
+const size_t LogMessage::kMaxLogMessageLen = 30000;
+
+// Need to reserve some space for FATAL messages because
+// we usually do LOG(FATAL) when we ran out of heap memory.
+// However, since LogMessage() also calls new[], in this case,
+// it will recusively call LOG(FATAL), which then call new[] ... etc.
+// Eventually, the program will run out of stack memory and no message
+// will get logged.   Note that we will not be protecting this buffer
+// with a lock because the chances are very small that there will
+// be a contention during LOG(FATAL) which can only happen at most
+// once per program.
+static char fatal_message_buffer[LogMessage::kMaxLogMessageLen+1];
+
+// Similarly we reserve space for a LogMessageData struct to be used
+// for FATAL messages.
+LogMessage::LogMessageData LogMessage::fatal_message_data_(0, FATAL, 0);
+
+LogMessage::LogMessageData::LogMessageData(int preserved_errno,
+                                           LogSeverity severity,
+                                           int ctr) :
+    // ORDER DEPENDENCY: buf_ comes before message_text_ comes before stream_
+    preserved_errno_(preserved_errno),
+    // Use static buffer for LOG(FATAL)
+    buf_((severity != FATAL) ? new char[kMaxLogMessageLen+1] : NULL),
+    message_text_((severity != FATAL) ? buf_ : fatal_message_buffer),
+    stream_(message_text_, kMaxLogMessageLen, ctr),
+    severity_(severity) {
+}
+
+LogMessage::LogMessageData::~LogMessageData() {
+  delete[] buf_;
+}
+
+LogMessage::LogMessageData* LogMessage::GetMessageData(int preserved_errno,
+                                                       LogSeverity severity,
+                                                       int ctr) {
+  if (severity != FATAL) {
+    return allocated_;
+  } else {
+    fatal_message_data_.preserved_errno_ = preserved_errno;
+    fatal_message_data_.stream_.set_ctr(ctr);
+    return &fatal_message_data_;
+  }
+}
+
+LogMessage::LogMessage(const char* file, int line, LogSeverity severity,
+		       int ctr, void (LogMessage::*send_method)()) :
+    allocated_((severity != FATAL) ?
+               new LogMessageData(errno, severity, ctr) : NULL),
+    data_(GetMessageData(errno, severity, ctr)) {
+  Init(file, line, severity, send_method);
+}
+
+LogMessage::LogMessage(const char* file, int line, const CheckOpString& result)
+    : allocated_(NULL),
+      data_(GetMessageData(errno, FATAL, 0)) {
+  Init(file, line, FATAL, &LogMessage::SendToLog);
+  stream() << "Check failed: " << (*result.str_) << " ";
+}
+
+LogMessage::LogMessage(const char* file, int line) :
+    allocated_(new LogMessageData(errno, INFO, 0)),
+    data_(GetMessageData(errno, INFO, 0)) {
+  Init(file, line, INFO, &LogMessage::SendToLog);
+}
+
+LogMessage::LogMessage(const char* file, int line, LogSeverity severity) :
+    allocated_((severity != FATAL) ?
+               new LogMessageData(errno, severity, 0) : NULL),
+    data_(GetMessageData(errno, severity, 0)) {
+  Init(file, line, severity, &LogMessage::SendToLog);
+}
+
+LogMessage::LogMessage(const char* file, int line, LogSeverity severity,
+                       LogSink* sink) :
+    allocated_((severity != FATAL) ?
+               new LogMessageData(errno, severity, 0) : NULL),
+    data_(GetMessageData(errno, severity, 0)) {
+  Init(file, line, severity, &LogMessage::SendToSinkAndLog);
+  data_->sink_ = sink;  // override Init()'s setting to NULL
+}
+
+LogMessage::LogMessage(const char* file, int line, LogSeverity severity,
+                       vector<string> *outvec) :
+    allocated_((severity != FATAL) ?
+               new LogMessageData(errno, severity, 0) : NULL),
+    data_(GetMessageData(errno, severity, 0)) {
+  Init(file, line, severity, &LogMessage::SaveOrSendToLog);
+  data_->outvec_ = outvec; // override Init()'s setting to NULL
+}
+
+void LogMessage::Init(const char* file, int line, LogSeverity severity,
+                      void (LogMessage::*send_method)()) {
+  data_->line_ = line;
+  data_->send_method_ = send_method;
+
+  data_->outvec_ = NULL;
+  data_->sink_ = NULL;
+  data_->timestamp_ = time(NULL);
+  localtime_r(&data_->timestamp_, &data_->tm_time_);
+  RawLog__SetLastTime(data_->tm_time_);
+  data_->basename_ = const_basename(file);
+  data_->fullname_ = file;
+  data_->stream_.fill('0');
+
+  // In some cases, we use logging like a print mechanism and
+  // the prefixes get in the way
+  if (FLAGS_log_prefix && (line != kNoLogPrefix)) {
+    if ( is_default_thread() ) {
+      stream() << LogSeverityNames[severity][0]
+               << setw(2) << 1+data_->tm_time_.tm_mon
+               << setw(2) << data_->tm_time_.tm_mday
+               << ' '
+               << setw(2) << data_->tm_time_.tm_hour
+               << setw(2) << data_->tm_time_.tm_min
+               << setw(2) << data_->tm_time_.tm_sec
+               << ' ' << data_->basename_ << ':' << data_->line_ << "] ";
+    } else {
+      stream() << LogSeverityNames[severity][0]
+               << setw(2) << 1+data_->tm_time_.tm_mon
+               << setw(2) << data_->tm_time_.tm_mday
+               << ' '
+               << setw(2) << data_->tm_time_.tm_hour
+               << setw(2) << data_->tm_time_.tm_min
+               << setw(2) << data_->tm_time_.tm_sec
+               << ' ' << setw(8) << std::hex << pthread_self() << std::dec
+               << ' ' << data_->basename_ << ':' << data_->line_ << "] ";
+    }
+  }
+
+  data_->num_prefix_chars_ = data_->stream_.pcount();
+  data_->has_been_flushed_ = false;
+}
+
+LogMessage::~LogMessage() {
+  Flush();
+  delete allocated_;
+}
+
+// Flush buffered message, called by the destructor, or any other function
+// that needs to synchronize the log.
+void LogMessage::Flush() {
+  if (data_->has_been_flushed_ || data_->severity_ < FLAGS_minloglevel)
+    return;
+
+  data_->num_chars_to_log_ = data_->stream_.pcount();
+  data_->num_chars_to_syslog_ =
+    data_->num_chars_to_log_ - data_->num_prefix_chars_;
+
+  // Do we need to add a \n to the end of this message?
+  bool append_newline =
+    (data_->message_text_[data_->num_chars_to_log_-1] != '\n');
+  char original_final_char = '\0';
+
+  // If we do need to add a \n, we'll do it by violating the memory of the
+  // ostrstream buffer.  This is quick, and we'll make sure to undo our
+  // modification before anything else is done with the ostrstream.  It
+  // would be preferable not to do things this way, but it seems to be
+  // the best way to deal with this.
+  if (append_newline) {
+    original_final_char = data_->message_text_[data_->num_chars_to_log_];
+    data_->message_text_[data_->num_chars_to_log_++] = '\n';
+  }
+
+  // Prevent any subtle race conditions by wrapping a mutex lock around
+  // the actual logging action per se.
+  {
+    MutexLock l(&log_mutex);
+    (this->*(data_->send_method_))();
+    ++num_messages_[static_cast<int>(data_->severity_)];
+  }
+  LogDestination::WaitForSinks(data_);
+
+  if (append_newline) {
+    // Fix the ostrstream back how it was before we screwed with it.
+    // It's 99.44% certain that we don't need to worry about doing this.
+    data_->message_text_[data_->num_chars_to_log_-1] = original_final_char;
+  }
+
+  // If errno was already set before we enter the logging call, we'll
+  // set it back to that value when we return from the logging call.
+  // It happens often that we log an error message after a syscall
+  // failure, which can potentially set the errno to some other
+  // values.  We would like to preserve the original errno.
+  if (data_->preserved_errno_ != 0) {
+    errno = data_->preserved_errno_;
+  }
+
+  // Note that this message is now safely logged.  If we're asked to flush
+  // again, as a result of destruction, say, we'll do nothing on future calls.
+  data_->has_been_flushed_ = true;
+}
+
+// Copy of FATAL log message so that we can print it out again after
+// all the stack traces.
+// We cannot simply use fatal_message_buffer, because two or more FATAL log
+// messages may happen in a row. This is a real possibility given that
+// FATAL log messages are often associated with corrupted process state.
+// In this case, we still want to reprint the first FATAL log message, so
+// we need to save away the first message in a separate buffer.
+static time_t fatal_time;
+static char fatal_message[256];
+
+void ReprintFatalMessage() {
+  if (fatal_message[0]) {
+    const int n = strlen(fatal_message);
+    if (!FLAGS_logtostderr) {
+      // Also write to stderr
+      WriteToStderr(fatal_message, n);
+    }
+    LogDestination::LogToAllLogfiles(ERROR, fatal_time, fatal_message, n);
+  }
+}
+
+// L >= log_mutex (callers must hold the log_mutex).
+void LogMessage::SendToLog() {
+  static bool already_warned_before_initgoogle = false;
+
+  log_mutex.AssertHeld();
+
+  RAW_DCHECK(data_->num_chars_to_log_ > 0 &&
+             data_->message_text_[data_->num_chars_to_log_-1] == '\n', "");
+
+  // Messages of a given severity get logged to lower severity logs, too
+
+  if (!already_warned_before_initgoogle && !IsGoogleLoggingInitialized()) {
+    const char w[] = "WARNING: Logging before InitGoogleLogging() is "
+                     "written to STDERR\n";
+    WriteToStderr(w, strlen(w));
+    already_warned_before_initgoogle = true;
+  }
+
+  // global flag: never log to file if set.  Also -- don't log to a
+  // file if we haven't parsed the command line flags to get the
+  // program name.
+  if (FLAGS_logtostderr || !IsGoogleLoggingInitialized()) {
+    WriteToStderr(data_->message_text_, data_->num_chars_to_log_);
+
+    // this could be protected by a flag if necessary.
+    LogDestination::LogToSinks(data_->severity_,
+                               data_->fullname_, data_->basename_,
+                               data_->line_, &data_->tm_time_,
+                               data_->message_text_ + data_->num_prefix_chars_,
+                               (data_->num_chars_to_log_ -
+                                data_->num_prefix_chars_ - 1));
+  } else {
+
+    // log this message to all log files of severity <= severity_
+    LogDestination::LogToAllLogfiles(data_->severity_, data_->timestamp_,
+                                     data_->message_text_,
+                                     data_->num_chars_to_log_);
+
+    LogDestination::MaybeLogToStderr(data_->severity_, data_->message_text_,
+                                     data_->num_chars_to_log_);
+    LogDestination::MaybeLogToEmail(data_->severity_, data_->message_text_,
+                                    data_->num_chars_to_log_);
+    LogDestination::LogToSinks(data_->severity_,
+                               data_->fullname_, data_->basename_,
+                               data_->line_, &data_->tm_time_,
+                               data_->message_text_ + data_->num_prefix_chars_,
+                               (data_->num_chars_to_log_
+                                - data_->num_prefix_chars_ - 1));
+    // NOTE: -1 removes trailing \n
+  }
+
+  // If we log a FATAL message, flush all the log destinations, then toss
+  // a signal for others to catch. We leave the logs in a state that
+  // someone else can use them (as long as they flush afterwards)
+  if (data_->severity_ == FATAL) {
+    // save away the fatal message so we can print it again later
+    const int copy = min<int>(data_->num_chars_to_log_,
+                              sizeof(fatal_message)-1);
+    memcpy(fatal_message, data_->message_text_, copy);
+    fatal_message[copy] = '\0';
+    fatal_time = data_->timestamp_;
+
+    if (!FLAGS_logtostderr) {
+      for (int i = 0; i < NUM_SEVERITIES; ++i) {
+        if ( LogDestination::log_destinations_[i] )
+          LogDestination::log_destinations_[i]->logger_->Write(true, 0, "", 0);
+      }
+    }
+    
+    // release the lock that our caller (directly or indirectly)
+    // LogMessage::~LogMessage() grabbed so that signal handlers
+    // can use the logging facility. Alternately, we could add
+    // an entire unsafe logging interface to bypass locking
+    // for signal handlers but this seems simpler.
+    log_mutex.Unlock();
+    LogDestination::WaitForSinks(data_);
+
+    Fail();
+  }
+}
+
+static void logging_fail() {
+#if defined _DEBUG && defined COMPILER_MSVC
+  // When debugging on windows, avoid the obnoxious dialog and make
+  // it possible to continue past a LOG(FATAL) in the debugger
+  _asm int 3
+#else
+  abort();
+#endif
+}
+
+#ifdef HAVE___ATTRIBUTE__
+void (*g_logging_fail_func)() __attribute__((noreturn)) = &logging_fail;
+#else
+void (*g_logging_fail_func)() = &logging_fail;
+#endif
+
+void InstallFailureFunction(void (*fail_func)()) {
+  g_logging_fail_func = fail_func;
+}
+
+void LogMessage::Fail() {
+  g_logging_fail_func();
+}
+
+// L >= log_mutex (callers must hold the log_mutex).
+void LogMessage::SendToSinkAndLog() {
+  if (data_->sink_ != NULL) {
+    RAW_DCHECK(data_->num_chars_to_log_ > 0 &&
+               data_->message_text_[data_->num_chars_to_log_-1] == '\n', "");
+    data_->sink_->send(data_->severity_, data_->fullname_, data_->basename_,
+                       data_->line_, &data_->tm_time_,
+                       data_->message_text_ + data_->num_prefix_chars_,
+                       (data_->num_chars_to_log_ -
+                        data_->num_prefix_chars_ - 1));
+  }
+  SendToLog();
+}
+
+// L >= log_mutex (callers must hold the log_mutex).
+void LogMessage::SaveOrSendToLog() {
+  if (data_->outvec_ != NULL) {
+    RAW_DCHECK(data_->num_chars_to_log_ > 0 &&
+               data_->message_text_[data_->num_chars_to_log_-1] == '\n', "");
+    // Omit prefix of message and trailing newline when recording in outvec_.
+    const char *start = data_->message_text_ + data_->num_prefix_chars_;
+    int len = data_->num_chars_to_log_ - data_->num_prefix_chars_ - 1;
+    data_->outvec_->push_back(string(start, len));
+  } else {
+    SendToLog();
+  }
+}
+
+// L >= log_mutex (callers must hold the log_mutex).
+void LogMessage::SendToSyslogAndLog() {
+  // Before any calls to syslog(), make a single call to openlog()
+  static bool openlog_already_called = false;
+  if (!openlog_already_called) {
+    openlog(ProgramInvocationShortName(), LOG_CONS | LOG_NDELAY | LOG_PID,
+            LOG_USER);
+    openlog_already_called = true;
+  }
+
+  // This array maps Google severity levels to syslog levels
+  const int SEVERITY_TO_LEVEL[] = { LOG_INFO, LOG_WARNING, LOG_ERR, LOG_EMERG };
+  syslog(LOG_USER | SEVERITY_TO_LEVEL[static_cast<int>(data_->severity_)], "%.*s",
+         int(data_->num_chars_to_syslog_),
+         data_->message_text_ + data_->num_prefix_chars_);
+  SendToLog();
+}
+
+base::Logger* base::GetLogger(LogSeverity severity) {
+  MutexLock l(&log_mutex);
+  return LogDestination::log_destination(severity)->logger_;
+}
+
+void base::SetLogger(LogSeverity severity, base::Logger* logger) {
+  MutexLock l(&log_mutex);
+  LogDestination::log_destination(severity)->logger_ = logger;
+}
+
+// L < log_mutex.  Acquires and releases mutex_.
+int64 LogMessage::num_messages(int severity) {
+  MutexLock l(&log_mutex);
+  return num_messages_[severity];
+}
+
+// Output the COUNTER value. This is only valid if ostream is a
+// LogStream.
+ostream& operator<<(ostream &os, const PRIVATE_Counter&) {
+  LogMessage::LogStream *log = dynamic_cast<LogMessage::LogStream*>(&os);
+  CHECK(log == log->self());
+  os << log->ctr();
+  return os;
+}
+
+ErrnoLogMessage::ErrnoLogMessage(const char* file, int line,
+                                 LogSeverity severity, int ctr,
+                                 void (LogMessage::*send_method)())
+    : LogMessage(file, line, severity, ctr, send_method) {
+}
+
+ErrnoLogMessage::~ErrnoLogMessage() {
+  // Don't access errno directly because it may have been altered
+  // while streaming the message.
+  char buf[100];
+  posix_strerror_r(preserved_errno(), buf, sizeof(buf));
+  stream() << ": " << buf << " [" << preserved_errno() << "]";
+}
+
+void FlushLogFiles(LogSeverity min_severity) {
+  LogDestination::FlushLogFiles(min_severity);
+}
+
+void FlushLogFilesUnsafe(LogSeverity min_severity) {
+  LogDestination::FlushLogFilesUnsafe(min_severity);
+}
+
+void SetLogDestination(LogSeverity severity, const char* base_filename) {
+  LogDestination::SetLogDestination(severity, base_filename);
+}
+
+void SetLogSymlink(LogSeverity severity, const char* symlink_basename) {
+  LogDestination::SetLogSymlink(severity, symlink_basename);
+}
+
+LogSink::~LogSink() {
+}
+
+void LogSink::WaitTillSent() {
+  // noop default
+}
+
+string LogSink::ToString(LogSeverity severity, const char* file, int line,
+                         const struct ::tm* tm_time,
+                         const char* message, size_t message_len) {
+  ostringstream stream(string(message, message_len));
+  stream.fill('0');
+
+  if ( is_default_thread() ) {
+    stream << LogSeverityNames[severity][0]
+           << setw(2) << 1+tm_time->tm_mon
+           << setw(2) << tm_time->tm_mday
+           << ' '
+           << setw(2) << tm_time->tm_hour
+           << setw(2) << tm_time->tm_min
+           << setw(2) << tm_time->tm_sec
+           << ' ' << file << ':' << line << "] ";
+  } else {
+    stream << LogSeverityNames[severity][0]
+           << setw(2) << 1+tm_time->tm_mon
+           << setw(2) << tm_time->tm_mday
+           << ' '
+           << setw(2) << tm_time->tm_hour
+           << setw(2) << tm_time->tm_min
+           << setw(2) << tm_time->tm_sec
+           << ' ' << setw(8) << std::hex << pthread_self() << std::dec
+           << ' ' << file << ':' << line << "] ";
+  }
+
+  stream << string(message, message_len);
+  return stream.str();
+}
+
+void AddLogSink(LogSink *destination) {
+  LogDestination::AddLogSink(destination);
+}
+
+void RemoveLogSink(LogSink *destination) {
+  LogDestination::RemoveLogSink(destination);
+}
+
+void SetLogFilenameExtension(const char* ext) {
+  LogDestination::SetLogFilenameExtension(ext);
+}
+
+void SetStderrLogging(LogSeverity min_severity) {
+  LogDestination::SetStderrLogging(min_severity);
+}
+
+void SetEmailLogging(LogSeverity min_severity, const char* addresses) {
+  LogDestination::SetEmailLogging(min_severity, addresses);
+}
+
+void LogToStderr() {
+  LogDestination::LogToStderr();
+}
+
+// use_logging controls whether the logging functions LOG/VLOG are used
+// to log errors.  It should be set to false when the caller holds the
+// log_mutex.
+static bool SendEmailInternal(const char*dest, const char *subject,
+                              const char*body, bool use_logging) {
+  if (dest && *dest) {
+    if ( use_logging ) {
+      VLOG(1) << "Trying to send TITLE:" << subject
+              << " BODY:" << body << " to " << dest;
+    } else {
+      fprintf(stderr, "Trying to send TITLE: %s BODY: %s to %s\n",
+              subject, body, dest);
+    }
+
+    string cmd(FLAGS_logmailer);
+    cmd = cmd + " -s\"" + string(subject) + "\" " + string(dest);
+    FILE* pipe = popen(cmd.c_str(), "w");
+    if (pipe != NULL) {
+      // Add the body if we have one
+      if (body)
+        fwrite(body, sizeof(char), strlen(body), pipe);
+      bool ok = pclose(pipe) != -1;
+      if ( !ok ) {
+        if ( use_logging ) {
+          char buf[100];
+          posix_strerror_r(errno, buf, sizeof(buf));
+          LOG(ERROR) << "Problems sending mail to " << dest << ": " << buf;
+        } else {
+          char buf[100];
+          posix_strerror_r(errno, buf, sizeof(buf));
+          fprintf(stderr, "Problems sending mail to %s: %s\n", dest, buf);
+        }
+      }
+      return ok;
+    } else {
+      if ( use_logging ) {
+        LOG(ERROR) << "Unable to send mail to " << dest;
+      } else {
+        fprintf(stderr, "Unable to send mail to %s\n", dest);
+      }
+    }
+  }
+  return false;
+}
+
+bool SendEmail(const char*dest, const char *subject, const char*body){
+  return SendEmailInternal(dest, subject, body, true);
+}
+
+void GetTempDirectories(vector<string>* list) {
+  list->clear();
+#ifdef OS_WINDOWS
+  // On windows we'll try to find a directory in this order:
+  //   C:/Documents & Settings/whomever/TEMP (or whatever GetTempPath() is)
+  //   C:/TMP/
+  //   C:/TEMP/
+  //   C:/WINDOWS/ or C:/WINNT/
+  //   .
+  char tmp[MAX_PATH];
+  if (GetTempPathA(MAX_PATH, tmp))
+    list->push_back(tmp);
+  list->push_back("C:\\tmp\\");
+  list->push_back("C:\\temp\\");
+#else
+  // Directories, in order of preference. If we find a dir that
+  // exists, we stop adding other less-preferred dirs
+  const char * candidates[] = {
+    // Non-null only during unittest/regtest
+    getenv("TEST_TMPDIR"),
+
+    // Explicitly-supplied temp dirs
+    getenv("TMPDIR"), getenv("TMP"),
+
+    // If all else fails
+    "/tmp",
+  };
+
+  for (int i = 0; i < sizeof(candidates) / sizeof(*candidates); i++) {
+    const char *d = candidates[i];
+    if (!d) continue;  // Empty env var
+
+    // Make sure we don't surprise anyone who's expecting a '/'
+    string dstr = d;
+    if (dstr[dstr.size() - 1] != '/') {
+      dstr += "/";
+    }
+    list->push_back(dstr);
+
+    struct stat statbuf;
+    if (!stat(d, &statbuf) && S_ISDIR(statbuf.st_mode)) {
+      // We found a dir that exists - we're done.
+      return;
+    }
+  }
+
+#endif
+}
+
+static vector<string>* logging_directories_list;
+
+const vector<string>& GetLoggingDirectories() {
+  // Not strictly thread-safe but we're called early in InitGoogle().
+  if (logging_directories_list == NULL) {
+    logging_directories_list = new vector<string>;
+
+    if ( !FLAGS_log_dir.empty() ) {
+      // A dir was specified, we should use it
+      logging_directories_list->push_back(FLAGS_log_dir.c_str());
+    } else {
+      GetTempDirectories(logging_directories_list);
+#ifdef OS_WINDOWS
+      char tmp[MAX_PATH];
+      if (GetWindowsDirectoryA(tmp, MAX_PATH))
+        logging_directories_list->push_back(tmp);
+      logging_directories_list->push_back(".\\");
+#else
+      logging_directories_list->push_back("./");
+#endif
+    }
+  }
+  return *logging_directories_list;
+}
+
+void TestOnly_ClearLoggingDirectoriesList() {
+  fprintf(stderr, "TestOnly_ClearLoggingDirectoriesList should only be "
+          "called from test code.\n");
+  delete logging_directories_list;
+  logging_directories_list = NULL;
+}
+
+void GetExistingTempDirectories(vector<string>* list) {
+  GetTempDirectories(list);
+  vector<string>::iterator i_dir = list->begin();
+  while( i_dir != list->end() ) {
+    // zero arg to access means test for existence; no constant
+    // defined on windows
+    if ( access(i_dir->c_str(), 0) ) {
+      i_dir = list->erase(i_dir);
+    } else {
+      ++i_dir;
+    }
+  }
+}
+
+void TruncateLogFile(const char *path, int64 limit, int64 keep) {
+
+  struct stat statbuf;
+  const int kCopyBlockSize = 8 << 10;
+  char copybuf[kCopyBlockSize];
+  int64 read_offset, write_offset;
+  // Don't follow symlinks unless they're our own fd symlinks in /proc
+  int flags = O_RDWR;
+  const char *procfd_prefix = "/proc/self/fd/";
+  if (strncmp(procfd_prefix, path, strlen(procfd_prefix))) flags |= O_NOFOLLOW;
+
+  int fd = open(path, flags);
+  if (fd == -1) {
+    if (errno == EFBIG) {
+      // The log file in question has got too big for us to open. The
+      // real fix for this would be to compile logging.cc (or probably
+      // all of base/...) with -D_FILE_OFFSET_BITS=64 but that's
+      // rather scary.
+      // Instead just truncate the file to something we can manage
+      if (truncate(path, 0) == -1) {
+	PLOG(ERROR) << "Unable to truncate " << path;
+      } else {
+	LOG(ERROR) << "Truncated " << path << " due to EFBIG error";
+      }
+    } else {
+      PLOG(ERROR) << "Unable to open " << path;
+    }
+    return;
+  }
+  
+  if (fstat(fd, &statbuf) == -1) {
+    PLOG(ERROR) << "Unable to fstat()"; 
+    goto out_close_fd; 
+  }
+
+  // See if the path refers to a regular file bigger than the
+  // specified limit
+  if (!S_ISREG(statbuf.st_mode)) goto out_close_fd;
+  if (statbuf.st_size <= limit)  goto out_close_fd;
+  if (statbuf.st_size <= keep) goto out_close_fd;
+
+  // This log file is too large - we need to truncate it
+  LOG(INFO) << "Truncating " << path << " to " << keep << " bytes";
+  
+  // Copy the last "keep" bytes of the file to the beginning of the file
+  read_offset = statbuf.st_size - keep; 
+  write_offset = 0;
+  int bytesin, bytesout;
+  while ((bytesin = pread(fd, copybuf, sizeof(copybuf), read_offset)) > 0) {
+    bytesout = pwrite(fd, copybuf, bytesin, write_offset);
+    if (bytesout == -1) {
+      PLOG(ERROR) << "Unable to write to " << path;
+      break;
+    } else if (bytesout != bytesin) {
+      LOG(ERROR) << "Expected to write " << bytesin << ", wrote " << bytesout;
+    }
+    read_offset += bytesin;
+    write_offset += bytesout;
+  }
+  if (bytesin == -1) PLOG(ERROR) << "Unable to read from " << path;
+  
+  // Truncate the remainder of the file. If someone else writes to the
+  // end of the file after our last read() above, we lose their latest
+  // data. Too bad ...
+  if (ftruncate(fd, write_offset) == -1) {
+    PLOG(ERROR) << "Unable to truncate " << path;
+  }
+
+ out_close_fd:
+  close(fd);
+
+}
+
+void TruncateStdoutStderr() {
+  int64 limit = FLAGS_max_log_size << 20;
+  int64 keep = 1 << 20;
+  TruncateLogFile("/proc/self/fd/1", limit, keep);
+  TruncateLogFile("/proc/self/fd/2", limit, keep);
+}
+
+
+// Helper functions for string comparisons.
+#define DEFINE_CHECK_STROP_IMPL(name, func, expected) \
+  string* Check##func##expected##Impl(const char* s1, const char* s2, \
+                                      const char* names) { \
+    bool equal = s1 == s2 || (s1 && s2 && !func(s1, s2)); \
+    if (equal == expected) return NULL; \
+    else { \
+      strstream ss; \
+      ss << #name " failed: " << names << " (" << s1 << " vs. " << s2 << ")"; \
+      return new string(ss.str(), ss.pcount()); \
+    } \
+  }
+DEFINE_CHECK_STROP_IMPL(CHECK_STREQ, strcmp, true)
+DEFINE_CHECK_STROP_IMPL(CHECK_STRNE, strcmp, false)
+DEFINE_CHECK_STROP_IMPL(CHECK_STRCASEEQ, strcasecmp, true)
+DEFINE_CHECK_STROP_IMPL(CHECK_STRCASENE, strcasecmp, false)
+#undef DEFINE_CHECK_STROP_IMPL
+
+int posix_strerror_r(int err, char *buf, size_t len) {
+  // Sanity check input parameters
+  if (buf == NULL || len <= 0) {
+    errno = EINVAL;
+    return -1;
+  }
+
+  // Reset buf and errno, and try calling whatever version of strerror_r()
+  // is implemented by glibc
+  buf[0] = '\000';
+  int old_errno = errno;
+  errno = 0;
+  char *rc = reinterpret_cast<char *>(strerror_r(err, buf, len));
+
+  // Both versions set errno on failure
+  if (errno) {
+    // Should already be there, but better safe than sorry
+    buf[0]     = '\000';
+    return -1;
+  }
+  errno = old_errno;
+
+  // POSIX is vague about whether the string will be terminated, although
+  // is indirectly implies that typically ERANGE will be returned, instead
+  // of truncating the string. This is different from the GNU implementation.
+  // We play it safe by always terminating the string explicitly.
+  buf[len-1] = '\000';
+
+  // If the function succeeded, we can use its exit code to determine the
+  // semantics implemented by glibc
+  if (!rc) {
+    return 0;
+  } else {
+    // GNU semantics detected
+    if (rc == buf) {
+      return 0;
+    } else {
+      buf[0] = '\000';
+#if defined(OS_MACOSX) || defined(OS_FREEBSD)
+      if (reinterpret_cast<int>(rc) < sys_nerr) {
+        // This means an error on MacOSX or FreeBSD.
+        return -1;
+      }
+#endif
+      strncat(buf, rc, len-1);
+      return 0;
+    }
+  }
+}
+
+LogMessageFatal::LogMessageFatal(const char* file, int line) :
+    LogMessage(file, line, FATAL) {}
+
+LogMessageFatal::LogMessageFatal(const char* file, int line,
+                                 const CheckOpString& result) :
+    LogMessage(file, line, result) {}
+
+LogMessageFatal::~LogMessageFatal() {
+    Flush();
+    LogMessage::Fail();
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/logging_striplog_test.sh b/src/logging_striplog_test.sh
new file mode 100755
index 0000000..79b15a2
--- /dev/null
+++ b/src/logging_striplog_test.sh
@@ -0,0 +1,45 @@
+#! /bin/sh
+# Copyright 2007 Google, Inc.
+# All Rights Reserved. 
+#
+# Author: Sergey Ioffe
+
+get_strings () {
+    if test -e ".libs/$1"; then
+        binary=".libs/$1"
+    elif test -e "$1.exe"; then
+        binary="$1.exe"
+    else
+        echo "We coundn't find $1 binary."
+        exit 1
+    fi
+    
+    strings -n 10 $binary | sort | awk '/TESTMESSAGE/ {printf "%s ", $2}'
+}
+
+# Die if "$1" != "$2", print $3 as death reason
+check_eq () {
+    if [ "$1" != "$2" ]; then
+        echo "Check failed: '$1' == '$2' ${3:+ ($3)}"
+        exit 1
+    fi
+}
+
+die () {
+    echo $1
+    exit 1
+}
+
+# Check that the string literals are appropriately stripped. This will
+# not be the case in debug mode.
+
+check_eq "`get_strings logging_striptest0`" "COND ERROR FATAL INFO WARNING "
+check_eq "`get_strings logging_striptest2`" "COND ERROR FATAL "
+check_eq "`get_strings logging_striptest10`" ""
+
+# Check that LOG(FATAL) aborts even for large STRIP_LOG
+
+./logging_striptest2 2>/dev/null && die "Did not abort for STRIP_LOG=2"
+./logging_striptest10 2>/dev/null && die "Did not abort for STRIP_LOG=10"
+
+echo "PASS"
diff --git a/src/logging_striptest10.cc b/src/logging_striptest10.cc
new file mode 100644
index 0000000..f2ffd9a
--- /dev/null
+++ b/src/logging_striptest10.cc
@@ -0,0 +1,7 @@
+// Copyright 2007 Google Inc. All Rights Reserved.
+// Author: Sergey Ioffe
+
+#define GOOGLE_STRIP_LOG 10
+
+// Include the actual test.
+#include "logging_striptest_main.cc"
diff --git a/src/logging_striptest2.cc b/src/logging_striptest2.cc
new file mode 100644
index 0000000..16f15e2
--- /dev/null
+++ b/src/logging_striptest2.cc
@@ -0,0 +1,7 @@
+// Copyright 2007 Google Inc. All Rights Reserved.
+// Author: Sergey Ioffe
+
+#define GOOGLE_STRIP_LOG 2
+
+// Include the actual test.
+#include "logging_striptest_main.cc"
diff --git a/src/logging_striptest_main.cc b/src/logging_striptest_main.cc
new file mode 100644
index 0000000..0ca9f51
--- /dev/null
+++ b/src/logging_striptest_main.cc
@@ -0,0 +1,40 @@
+// Copyright 2007 Google Inc. All Rights Reserved.
+// Author: Sergey Ioffe
+
+// The common part of the striplog tests.
+
+#include <stdio.h>
+#include <string>
+#include <iosfwd>
+#include "glog/logging.h"
+#include "base/commandlineflags.h"
+#include "config.h"
+
+DECLARE_bool(logtostderr);
+
+using std::string;
+using namespace GOOGLE_NAMESPACE;
+
+int CheckNoReturn(bool b) {
+  string s;
+  if (b) {
+    LOG(FATAL) << "Fatal";
+  } else {
+    return 0;
+  }
+}
+
+struct A { };
+std::ostream &operator<<(std::ostream &str, const A&) {return str;}
+
+int main(int argc, char* argv[]) {
+  FLAGS_logtostderr = true;
+  InitGoogleLogging(argv[0]);
+  LOG(INFO) << "TESTMESSAGE INFO";
+  LOG(WARNING) << 2 << "something" << "TESTMESSAGE WARNING"
+               << 1 << 'c' << A() << std::endl;
+  LOG(ERROR) << "TESTMESSAGE ERROR";
+  bool flag = true;
+  (flag ? LOG(INFO) : LOG(ERROR)) << "TESTMESSAGE COND";
+  LOG(FATAL) << "TESTMESSAGE FATAL";
+}
diff --git a/src/logging_unittest.cc b/src/logging_unittest.cc
new file mode 100644
index 0000000..ddd6ef0
--- /dev/null
+++ b/src/logging_unittest.cc
@@ -0,0 +1,923 @@
+//
+// Copyright 2002 Google, Inc.
+// All Rights Reserved.
+//
+// Author: Ray Sidney
+
+#include "utilities.h"
+
+#include <fcntl.h>
+#include <glob.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include <iomanip>
+#include <iostream>
+#include <queue>
+#include <sstream>
+#include <string>
+#include <vector>
+
+#include "base/commandlineflags.h"
+#include "glog/logging.h"
+#include "glog/raw_logging.h"
+#include "googletest.h"
+
+using namespace std;
+using namespace GOOGLE_NAMESPACE;
+
+static void TestLogging(bool check_counts);
+static void TestRawLogging();
+static void LogWithLevels(int v, int severity, bool err, bool alsoerr);
+static void TestLoggingLevels();
+static void TestLogString();
+static void TestLogSink();
+static void TestLogSinkWaitTillSent();
+static void TestCHECK();
+static void TestDCHECK();
+static void TestSTREQ();
+static void TestBasename();
+static void TestSymlink();
+static void TestExtension();
+static void TestWrapper();
+static void TestErrno();
+static void TestTruncate();
+
+static int x = -1;
+static void BM_Check1(int n) {
+  while (n-- > 0) {
+    CHECK_GE(n, x);
+    CHECK_GE(n, x);
+    CHECK_GE(n, x);
+    CHECK_GE(n, x);
+    CHECK_GE(n, x);
+    CHECK_GE(n, x);
+    CHECK_GE(n, x);
+    CHECK_GE(n, x);
+  }
+}
+BENCHMARK(BM_Check1);
+
+static void CheckFailure(int a, int b, const char* file, int line, const char* msg);
+static void BM_Check3(int n) {
+  while (n-- > 0) {
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+    if (n < x) CheckFailure(n, x, __FILE__, __LINE__, "n < x");
+  }
+}
+BENCHMARK(BM_Check3);
+
+static void BM_Check2(int n) {
+  if (n == 17) {
+    x = 5;
+  }
+  while (n-- > 0) {
+    CHECK(n >= x);
+    CHECK(n >= x);
+    CHECK(n >= x);
+    CHECK(n >= x);
+    CHECK(n >= x);
+    CHECK(n >= x);
+    CHECK(n >= x);
+    CHECK(n >= x);
+  }
+}
+BENCHMARK(BM_Check2);
+
+static void CheckFailure(int a, int b, const char* file, int line, const char* msg) {
+}
+
+int main(int argc, char **argv) {
+  // Test some basics before InitGoogleLogging:
+  CaptureTestStderr();
+  LogWithLevels(FLAGS_v, FLAGS_stderrthreshold,
+                FLAGS_logtostderr, FLAGS_alsologtostderr);
+  LogWithLevels(0, 0, 0, 0);  // simulate "before global c-tors"
+  const string early_stderr = GetCapturedTestStderr();
+
+  FLAGS_logtostderr = true;
+
+  InitGoogleLogging(argv[0]);
+
+  RunSpecifiedBenchmarks();
+
+  // so that death tests run before we use threads
+  CHECK_EQ(RUN_ALL_TESTS(), 0);
+
+  CaptureTestStderr();
+
+  // re-emit early_stderr
+  LogMessage("dummy", LogMessage::kNoLogPrefix, INFO).stream() << early_stderr;
+
+  TestLogging(true);
+  TestRawLogging();
+  TestLoggingLevels();
+  TestLogString();
+  TestLogSink();
+  TestLogSinkWaitTillSent();
+  TestCHECK();
+  TestDCHECK();
+  TestSTREQ();
+
+  // TODO: The golden test portion of this test is very flakey.
+  EXPECT_TRUE(
+      MungeAndDiffTestStderr(FLAGS_test_srcdir + "/src/logging_unittest.err"));
+
+  FLAGS_logtostderr = false;
+
+  TestBasename();
+  TestSymlink();
+  TestExtension();
+  TestWrapper();
+  TestErrno();
+  TestTruncate();
+
+  LOG(INFO) << "PASS";
+  return 0;
+}
+
+void TestLogging(bool check_counts) {
+  int64 base_num_infos   = LogMessage::num_messages(INFO);
+  int64 base_num_warning = LogMessage::num_messages(WARNING);
+  int64 base_num_errors  = LogMessage::num_messages(ERROR);
+
+  LOG(INFO) << string("foo ") << "bar " << 10 << ' ' << 3.4;
+  for ( int i = 0; i < 10; ++i ) {
+    int old_errno = errno;
+    errno = i;
+    PLOG_EVERY_N(ERROR, 2) << "Plog every 2, iteration " << COUNTER;
+    errno = old_errno;
+
+    LOG_EVERY_N(ERROR, 3) << "Log every 3, iteration " << COUNTER << endl;
+    LOG_EVERY_N(ERROR, 4) << "Log every 4, iteration " << COUNTER << endl;
+
+    LOG_IF_EVERY_N(WARNING, true, 5) << "Log if every 5, iteration " << COUNTER;
+    LOG_IF_EVERY_N(WARNING, false, 3)
+        << "Log if every 3, iteration " << COUNTER;
+    LOG_IF_EVERY_N(INFO, true, 1) << "Log if every 1, iteration " << COUNTER;
+    LOG_IF_EVERY_N(ERROR, (i < 3), 2)
+        << "Log if less than 3 every 2, iteration " << COUNTER;
+  }
+  LOG_IF(WARNING, true) << "log_if this";
+  LOG_IF(WARNING, false) << "don't log_if this";
+
+  char s[] = "array";
+  LOG(INFO) << s;
+  const char const_s[] = "const array";
+  LOG(INFO) << const_s;
+  int j = 1000;
+  LOG(ERROR) << string("foo") << ' '<< j << ' ' << setw(10) << j << " "
+             << setw(1) << hex << j;
+
+  LogMessage("foo", LogMessage::kNoLogPrefix, INFO).stream() << "no prefix";
+
+  if (check_counts) {
+    CHECK_EQ(base_num_infos   + 14, LogMessage::num_messages(INFO));
+    CHECK_EQ(base_num_warning + 3,  LogMessage::num_messages(WARNING));
+    CHECK_EQ(base_num_errors  + 15, LogMessage::num_messages(ERROR));
+  }
+}
+
+static void NoAllocNewHook() {
+  CHECK(false) << "unexpected new";
+}
+
+struct NewHook {
+  NewHook() {
+    g_new_hook = &NoAllocNewHook;
+  }
+  ~NewHook() {
+    g_new_hook = NULL;
+  }
+};
+
+TEST(DeathNoAllocNewHook, logging) {
+  // tests that NewHook used below works
+  NewHook new_hook;
+  ASSERT_DEATH({
+    new int;
+  }, "unexpected new");
+}
+
+void TestRawLogging() {
+  string* foo = new string("foo ");
+  string huge_str(50000, 'a');
+
+  FlagSaver saver;
+
+  // Check that RAW loggging does not use mallocs.
+  NewHook new_hook;
+
+  RAW_LOG(INFO, "%s%s%d%c%f", foo->c_str(), "bar ", 10, ' ', 3.4);
+  char s[] = "array";
+  RAW_LOG(WARNING, "%s", s);
+  const char const_s[] = "const array";
+  RAW_LOG(INFO, "%s", const_s);
+  void* p = reinterpret_cast<void*>(0x12345678);
+  RAW_LOG(INFO, "ptr %p", p);
+  p = NULL;
+  RAW_LOG(INFO, "ptr %p", p);
+  int j = 1000;
+  RAW_LOG(ERROR, "%s%d%c%010d%s%1x", foo->c_str(), j, ' ', j, " ", j);
+  RAW_VLOG(0, "foo %d", j);
+
+#ifdef NDEBUG
+  RAW_LOG(INFO, "foo %d", j);  // so that have same stderr to compare
+#else
+  RAW_DLOG(INFO, "foo %d", j);  // test RAW_DLOG in debug mode
+#endif
+
+  // test how long messages are chopped:
+  RAW_LOG(WARNING, "Huge string: %s", huge_str.c_str());
+  RAW_VLOG(0, "Huge string: %s", huge_str.c_str());
+
+  FLAGS_v = 0;
+  RAW_LOG(INFO, "log");
+  RAW_VLOG(0, "vlog 0 on");
+  RAW_VLOG(1, "vlog 1 off");
+  RAW_VLOG(2, "vlog 2 off");
+  RAW_VLOG(3, "vlog 3 off");
+  FLAGS_v = 2;
+  RAW_LOG(INFO, "log");
+  RAW_VLOG(1, "vlog 1 on");
+  RAW_VLOG(2, "vlog 2 on");
+  RAW_VLOG(3, "vlog 3 off");
+
+#ifdef NDEBUG
+  RAW_DCHECK(1 == 2, " RAW_DCHECK's shouldn't be compiled in normal mode");
+#endif
+
+  RAW_CHECK(1 == 1, "should be ok");
+  RAW_DCHECK(true, "should be ok");
+
+  delete foo;
+}
+
+void LogWithLevels(int v, int severity, bool err, bool alsoerr) {
+  RAW_LOG(INFO,
+          "Test: v=%d stderrthreshold=%d logtostderr=%d alsologtostderr=%d",
+          v, severity, err, alsoerr);
+
+  FlagSaver saver;
+
+  FLAGS_v = v;
+  FLAGS_stderrthreshold = severity;
+  FLAGS_logtostderr = err;
+  FLAGS_alsologtostderr = alsoerr;
+
+  RAW_VLOG(-1, "vlog -1");
+  RAW_VLOG(0, "vlog 0");
+  RAW_VLOG(1, "vlog 1");
+  RAW_LOG(INFO, "log info");
+  RAW_LOG(WARNING, "log warning");
+  RAW_LOG(ERROR, "log error");
+
+  VLOG(-1) << "vlog -1";
+  VLOG(0) << "vlog 0";
+  VLOG(1) << "vlog 1";
+  LOG(INFO) << "log info";
+  LOG(WARNING) << "log warning";
+  LOG(ERROR) << "log error";
+
+  VLOG_IF(-1, true) << "vlog_if -1";
+  VLOG_IF(-1, false) << "don't vlog_if -1";
+  VLOG_IF(0, true) << "vlog_if 0";
+  VLOG_IF(0, false) << "don't vlog_if 0";
+  VLOG_IF(1, true) << "vlog_if 1";
+  VLOG_IF(1, false) << "don't vlog_if 1";
+  LOG_IF(INFO, true) << "log_if info";
+  LOG_IF(INFO, false) << "don't log_if info";
+  LOG_IF(WARNING, true) << "log_if warning";
+  LOG_IF(WARNING, false) << "don't log_if warning";
+  LOG_IF(ERROR, true) << "log_if error";
+  LOG_IF(ERROR, false) << "don't log_if error";
+
+  int c;
+  c = 1; VLOG_IF(100, c -= 2) << "vlog_if 100 expr"; EXPECT_EQ(c, -1);
+  c = 1; VLOG_IF(0, c -= 2) << "vlog_if 0 expr"; EXPECT_EQ(c, -1);
+  c = 1; LOG_IF(INFO, c -= 2) << "log_if info expr"; EXPECT_EQ(c, -1);
+  c = 1; LOG_IF(ERROR, c -= 2) << "log_if error expr"; EXPECT_EQ(c, -1);
+  c = 2; VLOG_IF(0, c -= 2) << "don't vlog_if 0 expr"; EXPECT_EQ(c, 0);
+  c = 2; LOG_IF(ERROR, c -= 2) << "don't log_if error expr"; EXPECT_EQ(c, 0);
+
+  c = 3; LOG_IF_EVERY_N(INFO, c -= 4, 1) << "log_if info every 1 expr";
+  EXPECT_EQ(c, -1);
+  c = 3; LOG_IF_EVERY_N(ERROR, c -= 4, 1) << "log_if error every 1 expr";
+  EXPECT_EQ(c, -1);
+  c = 4; LOG_IF_EVERY_N(ERROR, c -= 4, 3) << "don't log_if info every 3 expr";
+  EXPECT_EQ(c, 0);
+  c = 4; LOG_IF_EVERY_N(ERROR, c -= 4, 3) << "don't log_if error every 3 expr";
+  EXPECT_EQ(c, 0);
+  c = 5; VLOG_IF_EVERY_N(0, c -= 4, 1) << "vlog_if 0 every 1 expr";
+  EXPECT_EQ(c, 1);
+  c = 5; VLOG_IF_EVERY_N(100, c -= 4, 3) << "vlog_if 100 every 3 expr";
+  EXPECT_EQ(c, 1);
+  c = 6; VLOG_IF_EVERY_N(0, c -= 6, 1) << "don't vlog_if 0 every 1 expr";
+  EXPECT_EQ(c, 0);
+  c = 6; VLOG_IF_EVERY_N(100, c -= 6, 3) << "don't vlog_if 100 every 1 expr";
+  EXPECT_EQ(c, 0);
+}
+
+void TestLoggingLevels() {
+  LogWithLevels(0, INFO, false, false);
+  LogWithLevels(1, INFO, false, false);
+  LogWithLevels(-1, INFO, false, false);
+  LogWithLevels(0, WARNING, false, false);
+  LogWithLevels(0, ERROR, false, false);
+  LogWithLevels(0, FATAL, false, false);
+  LogWithLevels(0, FATAL, true, false);
+  LogWithLevels(0, FATAL, false, true);
+  LogWithLevels(1, WARNING, false, false);
+  LogWithLevels(1, FATAL, false, true);
+}
+
+TEST(DeathRawCHECK, logging) {
+  ASSERT_DEATH(RAW_CHECK(false, "failure 1"),
+               "RAW: Check false failed: failure 1");
+  ASSERT_DEBUG_DEATH(RAW_DCHECK(1 == 2, "failure 2"),
+               "RAW: Check 1 == 2 failed: failure 2");
+}
+
+void TestLogString() {
+  vector<string> errors;
+  vector<string> *no_errors = NULL;
+
+  LOG_STRING(INFO, &errors) << "LOG_STRING: " << "collected info";
+  LOG_STRING(WARNING, &errors) << "LOG_STRING: " << "collected warning";
+  LOG_STRING(ERROR, &errors) << "LOG_STRING: " << "collected error";
+
+  LOG_STRING(INFO, no_errors) << "LOG_STRING: " << "reported info";
+  LOG_STRING(WARNING, no_errors) << "LOG_STRING: " << "reported warning";
+  LOG_STRING(ERROR, NULL) << "LOG_STRING: " << "reported error";
+
+  for (int i = 0; i < errors.size(); ++i) {
+    LOG(INFO) << "Captured by LOG_STRING:  " << errors[i];
+  }
+}
+
+class TestLogSinkImpl : public LogSink {
+ public:
+  vector<string> errors;
+  virtual void send(LogSeverity severity, const char* full_filename,
+                    const char* base_filename, int line,
+                    const struct tm* tm_time,
+                    const char* message, size_t message_len) {
+    errors.push_back(
+      ToString(severity, base_filename, line, tm_time, message, message_len));
+  }
+};
+
+void TestLogSink() {
+  TestLogSinkImpl sink;
+  LogSink *no_sink = NULL;
+
+  LOG_TO_SINK(&sink, INFO) << "LOG_TO_SINK: " << "collected info";
+  LOG_TO_SINK(&sink, WARNING) << "LOG_TO_SINK: " << "collected warning";
+  LOG_TO_SINK(&sink, ERROR) << "LOG_TO_SINK: " << "collected error";
+
+  LOG_TO_SINK(no_sink, INFO) << "LOG_TO_SINK: " << "reported info";
+  LOG_TO_SINK(no_sink, WARNING) << "LOG_TO_SINK: " << "reported warning";
+  LOG_TO_SINK(NULL, ERROR) << "LOG_TO_SINK: " << "reported error";
+
+  LOG(INFO) << "Captured by LOG_TO_SINK:";
+  for (int i = 0; i < sink.errors.size(); ++i) {
+    LogMessage("foo", LogMessage::kNoLogPrefix, INFO).stream()
+      << sink.errors[i];
+  }
+}
+
+// For testing using CHECK*() on anonymous enums.
+enum {
+  CASE_A,
+  CASE_B
+};
+
+void TestCHECK() {
+  // Tests using CHECK*() on int values.
+  CHECK(1 == 1);
+  CHECK_EQ(1, 1);
+  CHECK_NE(1, 2);
+  CHECK_GE(1, 1);
+  CHECK_GE(2, 1);
+  CHECK_LE(1, 1);
+  CHECK_LE(1, 2);
+  CHECK_GT(2, 1);
+  CHECK_LT(1, 2);
+
+  // Tests using CHECK*() on anonymous enums.
+  // Apple's GCC doesn't like this.
+#if !defined(OS_MACOSX)
+  CHECK_EQ(CASE_A, CASE_A);
+  CHECK_NE(CASE_A, CASE_B);
+  CHECK_GE(CASE_A, CASE_A);
+  CHECK_GE(CASE_B, CASE_A);
+  CHECK_LE(CASE_A, CASE_A);
+  CHECK_LE(CASE_A, CASE_B);
+  CHECK_GT(CASE_B, CASE_A);
+  CHECK_LT(CASE_A, CASE_B);
+#endif
+}
+
+void TestDCHECK() {
+#ifdef NDEBUG
+  DCHECK( 1 == 2 ) << " DCHECK's shouldn't be compiled in normal mode";
+#endif
+  DCHECK( 1 == 1 );
+  DCHECK_EQ(1, 1);
+  DCHECK_NE(1, 2);
+  DCHECK_GE(1, 1);
+  DCHECK_GE(2, 1);
+  DCHECK_LE(1, 1);
+  DCHECK_LE(1, 2);
+  DCHECK_GT(2, 1);
+  DCHECK_LT(1, 2);
+}
+
+void TestSTREQ() {
+  CHECK_STREQ("this", "this");
+  CHECK_STREQ(NULL, NULL);
+  CHECK_STRCASEEQ("this", "tHiS");
+  CHECK_STRCASEEQ(NULL, NULL);
+  CHECK_STRNE("this", "tHiS");
+  CHECK_STRNE("this", NULL);
+  CHECK_STRCASENE("this", "that");
+  CHECK_STRCASENE(NULL, "that");
+  CHECK_STREQ((string("a")+"b").c_str(), "ab");
+  CHECK_STREQ(string("test").c_str(),
+              (string("te") + string("st")).c_str());
+}
+
+TEST(DeathSTREQ, logging) {
+  ASSERT_DEATH(CHECK_STREQ(NULL, "this"), "");
+  ASSERT_DEATH(CHECK_STREQ("this", "siht"), "");
+  ASSERT_DEATH(CHECK_STRCASEEQ(NULL, "siht"), "");
+  ASSERT_DEATH(CHECK_STRCASEEQ("this", "siht"), "");
+  ASSERT_DEATH(CHECK_STRNE(NULL, NULL), "");
+  ASSERT_DEATH(CHECK_STRNE("this", "this"), "");
+  ASSERT_DEATH(CHECK_STREQ((string("a")+"b").c_str(), "abc"), "");
+}
+
+TEST(CheckNOTNULL, Simple) {
+  int64 t;
+  void *ptr = static_cast<void *>(&t);
+  void *ref = CHECK_NOTNULL(ptr);
+  EXPECT_EQ(ptr, ref);
+  CHECK_NOTNULL(reinterpret_cast<char *>(&t));
+  CHECK_NOTNULL(reinterpret_cast<unsigned char *>(&t));
+  CHECK_NOTNULL(reinterpret_cast<int *>(&t));
+  CHECK_NOTNULL(reinterpret_cast<int64 *>(&t));
+}
+
+TEST(DeathCheckNN, Simple) {
+  ASSERT_DEATH(CHECK_NOTNULL(static_cast<void *>(NULL)), "");
+}
+
+// Get list of file names that match pattern
+static void GetFiles(const string& pattern, vector<string>* files) {
+  files->clear();
+  glob_t g;
+  const int r = glob(pattern.c_str(), 0, NULL, &g);
+  CHECK((r == 0) || (r == GLOB_NOMATCH)) << ": error matching " << pattern;
+  for (int i = 0; i < g.gl_pathc; i++) {
+    files->push_back(string(g.gl_pathv[i]));
+  }
+  globfree(&g);
+}
+
+// Delete files patching pattern
+static void DeleteFiles(const string& pattern) {
+  vector<string> files;
+  GetFiles(pattern, &files);
+  for (int i = 0; i < files.size(); i++) {
+    CHECK(unlink(files[i].c_str()) == 0) << ": " << strerror(errno);
+  }
+}
+
+static void CheckFile(const string& name, const string& expected_string) {
+  vector<string> files;
+  GetFiles(name + "*", &files);
+  CHECK_EQ(files.size(), 1);
+
+  FILE* file = fopen(files[0].c_str(), "r");
+  CHECK(file != NULL) << ": could not open " << files[0];
+  char buf[1000];
+  while (fgets(buf, sizeof(buf), file) != NULL) {
+    if (strstr(buf, expected_string.c_str()) != NULL) {
+      fclose(file);
+      return;
+    }
+  }
+  fclose(file);
+  LOG(FATAL) << "Did not find " << expected_string << " in " << files[0];
+}
+
+static void TestBasename() {
+  fprintf(stderr, "==== Test setting log file basename\n");
+  string dest = FLAGS_test_tmpdir + "/logging_test_basename";
+  DeleteFiles(dest + "*");
+
+  SetLogDestination(INFO, dest.c_str());
+  LOG(INFO) << "message to new base";
+  FlushLogFiles(INFO);
+  CheckFile(dest, "message to new base");
+
+  DeleteFiles(dest + "*");
+}
+
+static void TestSymlink() {
+  fprintf(stderr, "==== Test setting log file symlink\n");
+  string dest = FLAGS_test_tmpdir + "/logging_test_symlink";
+  string sym = FLAGS_test_tmpdir + "/symlinkbase";
+  DeleteFiles(dest + "*");
+  DeleteFiles(sym + "*");
+
+  SetLogSymlink(INFO, "symlinkbase");
+  SetLogDestination(INFO, dest.c_str());
+  LOG(INFO) << "message to new symlink";
+  FlushLogFiles(INFO);
+  CheckFile(sym, "message to new symlink");
+
+  DeleteFiles(dest + "*");
+  DeleteFiles(sym + "*");
+}
+
+static void TestExtension() {
+  fprintf(stderr, "==== Test setting log file extension\n");
+  string dest = FLAGS_test_tmpdir + "/logging_test_extension";
+  DeleteFiles(dest + "*");
+
+  SetLogDestination(INFO, dest.c_str());
+  SetLogFilenameExtension("specialextension");
+  LOG(INFO) << "message to new extension";
+  FlushLogFiles(INFO);
+  CheckFile(dest, "message to new extension");
+
+  // Check that file name ends with extension
+  vector<string> filenames;
+  GetFiles(dest + "*", &filenames);
+  CHECK_EQ(filenames.size(), 1);
+  CHECK(strstr(filenames[0].c_str(), "specialextension") != NULL);
+
+  DeleteFiles(dest + "*");
+}
+
+struct MyLogger : public base::Logger {
+  string data;
+
+  virtual void Write(bool should_flush,
+                     time_t timestamp,
+                     const char* message,
+                     int length) {
+    data.append(message, length);
+  }
+
+  virtual void Flush() { }
+
+  virtual uint32 LogSize() { return data.length(); }
+};
+
+static void TestWrapper() {
+  fprintf(stderr, "==== Test log wrapper\n");
+
+  MyLogger my_logger;
+  base::Logger* old_logger = base::GetLogger(INFO);
+  base::SetLogger(INFO, &my_logger);
+  LOG(INFO) << "Send to wrapped logger";
+  FlushLogFiles(INFO);
+  base::SetLogger(INFO, old_logger);
+
+  CHECK(strstr(my_logger.data.c_str(), "Send to wrapped logger") != NULL);
+}
+
+static void TestErrno() {
+  fprintf(stderr, "==== Test errno preservation\n");
+
+  errno = ENOENT;
+  TestLogging(false);
+  CHECK_EQ(errno, ENOENT);
+}
+
+static void TestOneTruncate(const char *path, int64 limit, int64 keep,
+                            int64 dsize, int64 ksize, int64 expect) {
+  int fd;
+  CHECK_ERR(fd = open(path, O_RDWR | O_CREAT | O_TRUNC, 0600));
+
+  const char *discardstr = "DISCARDME!", *keepstr = "KEEPME!";
+
+  // Fill the file with the requested data; first discard data, then kept data
+  int64 written = 0;
+  while (written < dsize) {
+    int bytes = min<int64>(dsize - written, strlen(discardstr));
+    CHECK_ERR(write(fd, discardstr, bytes));
+    written += bytes;
+  }
+  written = 0;
+  while (written < ksize) {
+    int bytes = min<int64>(ksize - written, strlen(keepstr));
+    CHECK_ERR(write(fd, keepstr, bytes));
+    written += bytes;
+  }
+
+  TruncateLogFile(path, limit, keep);
+
+  // File should now be shorter
+  struct stat statbuf;
+  CHECK_ERR(fstat(fd, &statbuf));
+  CHECK_EQ(statbuf.st_size, expect);
+  CHECK_ERR(lseek(fd, 0, SEEK_SET));
+
+  // File should contain the suffix of the original file
+  char buf[statbuf.st_size + 1];
+  memset(buf, 0, sizeof(buf));
+  CHECK_ERR(read(fd, buf, sizeof(buf)));
+
+  const char *p = buf;
+  int64 checked = 0;
+  while (checked < expect) {
+    int bytes = min<int64>(expect - checked, strlen(keepstr));
+    CHECK(!memcmp(p, keepstr, bytes));
+    checked += bytes;
+  }
+  close(fd);
+}
+
+static void TestTruncate() {
+  fprintf(stderr, "==== Test log truncation\n");
+  string path = FLAGS_test_tmpdir + "/truncatefile";
+
+  // Test on a small file
+  TestOneTruncate(path.c_str(), 10, 10, 10, 10, 10);
+
+  // And a big file (multiple blocks to copy)
+  TestOneTruncate(path.c_str(), 2<<20, 4<<10, 3<<20, 4<<10, 4<<10);
+
+  // Check edge-case limits
+  TestOneTruncate(path.c_str(), 10, 20, 0, 20, 20);
+  TestOneTruncate(path.c_str(), 10, 0, 0, 0, 0);
+  TestOneTruncate(path.c_str(), 10, 50, 0, 10, 10);
+  TestOneTruncate(path.c_str(), 50, 100, 0, 30, 30);
+
+  // MacOSX 10.4 doesn't fail in this case. Let's just ignore this test.
+#if !defined(OS_MACOSX)
+  // Through a symlink should fail to truncate
+  string linkname = path + ".link";
+  unlink(linkname.c_str());
+  CHECK_ERR(symlink(path.c_str(), linkname.c_str()));
+  TestOneTruncate(linkname.c_str(), 10, 10, 0, 30, 30);
+#endif
+
+  // The /proc/self path makes sense only for linux.
+#if defined(OS_LINUX)
+  // Through an open fd symlink should work
+  int fd;
+  CHECK_ERR(fd = open(path.c_str(), O_APPEND | O_WRONLY));
+  char fdpath[64];
+  snprintf(fdpath, sizeof(fdpath), "/proc/self/fd/%d", fd);
+  TestOneTruncate(fdpath, 10, 10, 10, 10, 10);
+#endif
+}
+
+_START_GOOGLE_NAMESPACE_
+extern  // in logging.cc
+bool SafeFNMatch_(const char* pattern, size_t patt_len,
+                  const char* str, size_t str_len);
+_END_GOOGLE_NAMESPACE_
+
+static bool WrapSafeFNMatch(string pattern, string str) {
+  pattern += "abc";
+  str += "defgh";
+  return SafeFNMatch_(pattern.data(), pattern.size() - 3,
+                      str.data(), str.size() - 5);
+}
+
+TEST(SafeFNMatch, logging) {
+  CHECK(WrapSafeFNMatch("foo", "foo"));
+  CHECK(!WrapSafeFNMatch("foo", "bar"));
+  CHECK(!WrapSafeFNMatch("foo", "fo"));
+  CHECK(!WrapSafeFNMatch("foo", "foo2"));
+  CHECK(WrapSafeFNMatch("bar/foo.ext", "bar/foo.ext"));
+  CHECK(WrapSafeFNMatch("*ba*r/fo*o.ext*", "bar/foo.ext"));
+  CHECK(!WrapSafeFNMatch("bar/foo.ext", "bar/baz.ext"));
+  CHECK(!WrapSafeFNMatch("bar/foo.ext", "bar/foo"));
+  CHECK(!WrapSafeFNMatch("bar/foo.ext", "bar/foo.ext.zip"));
+  CHECK(WrapSafeFNMatch("ba?/*.ext", "bar/foo.ext"));
+  CHECK(WrapSafeFNMatch("ba?/*.ext", "baZ/FOO.ext"));
+  CHECK(!WrapSafeFNMatch("ba?/*.ext", "barr/foo.ext"));
+  CHECK(!WrapSafeFNMatch("ba?/*.ext", "bar/foo.ext2"));
+  CHECK(WrapSafeFNMatch("ba?/*", "bar/foo.ext2"));
+  CHECK(WrapSafeFNMatch("ba?/*", "bar/"));
+  CHECK(!WrapSafeFNMatch("ba?/?", "bar/"));
+  CHECK(!WrapSafeFNMatch("ba?/*", "bar"));
+}
+
+// TestWaitingLogSink will save messages here
+// No lock: Accessed only by TestLogSinkWriter thread
+// and after its demise by its creator.
+static vector<string> global_messages;
+
+// helper for TestWaitingLogSink below.
+// Thread that does the logic of TestWaitingLogSink
+// It's free to use LOG() itself.
+class TestLogSinkWriter : public Thread {
+ public:
+
+  TestLogSinkWriter() : should_exit_(false) {
+    SetJoinable(true);
+    Start();
+  }
+
+  // Just buffer it (can't use LOG() here).
+  void Buffer(const string& message) {
+    mutex_.Lock();
+    RAW_LOG(INFO, "Buffering");
+    messages_.push(message);
+    mutex_.Unlock();
+    RAW_LOG(INFO, "Buffered");
+  }
+
+  // Wait for the buffer to clear (can't use LOG() here).
+  void Wait() {
+    RAW_LOG(INFO, "Waiting");
+    mutex_.Lock();
+    while (!NoWork()) {
+      mutex_.Unlock();
+      SleepForMilliseconds(1);
+      mutex_.Lock();
+    }
+    RAW_LOG(INFO, "Waited");
+    mutex_.Unlock();
+  }
+
+  // Trigger thread exit.
+  void Stop() {
+    MutexLock l(&mutex_);
+    should_exit_ = true;
+  }
+
+ private:
+
+  // helpers ---------------
+
+  // For creating a "Condition".
+  bool NoWork() { return messages_.empty(); }
+  bool HaveWork() { return !messages_.empty() || should_exit_; }
+
+  // Thread body; CAN use LOG() here!
+  virtual void Run() {
+    while (1) {
+      mutex_.Lock();
+      while (!HaveWork()) {
+        mutex_.Unlock();
+        SleepForMilliseconds(1);
+        mutex_.Lock();
+      }
+      if (should_exit_ && messages_.empty()) {
+        mutex_.Unlock();
+        break;
+      }
+      // Give the main thread time to log its message,
+      // so that we get a reliable log capture to compare to golden file.
+      // Same for the other sleep below.
+      SleepForMilliseconds(20);
+      RAW_LOG(INFO, "Sink got a messages");  // only RAW_LOG under mutex_ here
+      string message = messages_.front();
+      messages_.pop();
+      // Normally this would be some more real/involved logging logic
+      // where LOG() usage can't be eliminated,
+      // e.g. pushing the message over with an RPC:
+      int messages_left = messages_.size();
+      mutex_.Unlock();
+      SleepForMilliseconds(20);
+      // May not use LOG while holding mutex_, because Buffer()
+      // acquires mutex_, and Buffer is called from LOG(),
+      // which has its own internal mutex:
+      // LOG()->LogToSinks()->TestWaitingLogSink::send()->Buffer()
+      LOG(INFO) << "Sink is sending out a message: " << message;
+      LOG(INFO) << "Have " << messages_left << " left";
+      global_messages.push_back(message);
+    }
+  }
+
+  // data ---------------
+
+  Mutex mutex_;
+  bool should_exit_;
+  queue<string> messages_;  // messages to be logged
+};
+
+// A log sink that exercises WaitTillSent:
+// it pushes data to a buffer and wakes up another thread to do the logging
+// (that other thread can than use LOG() itself),
+class TestWaitingLogSink : public LogSink {
+ public:
+
+  TestWaitingLogSink() {
+    tid_ = pthread_self();  // for thread-specific behavior
+    AddLogSink(this);
+  }
+  ~TestWaitingLogSink() {
+    RemoveLogSink(this);
+    writer_.Stop();
+    writer_.Join();
+  }
+
+  // (re)define LogSink interface
+
+  virtual void send(LogSeverity severity, const char* full_filename,
+                    const char* base_filename, int line,
+                    const struct tm* tm_time,
+                    const char* message, size_t message_len) {
+    // Push it to Writer thread if we are the original logging thread.
+    // Note: Something like ThreadLocalLogSink is a better choice
+    //       to do thread-specific LogSink logic for real.
+    if (pthread_equal(tid_, pthread_self())) {
+      writer_.Buffer(ToString(severity, base_filename, line,
+                              tm_time, message, message_len));
+    }
+  }
+  virtual void WaitTillSent() {
+    // Wait for Writer thread if we are the original logging thread.
+    if (pthread_equal(tid_, pthread_self()))  writer_.Wait();
+  }
+
+ private:
+
+  pthread_t tid_;
+  TestLogSinkWriter writer_;
+};
+
+// Check that LogSink::WaitTillSent can be used in the advertised way.
+// We also do golden-stderr comparison.
+static void TestLogSinkWaitTillSent() {
+  { TestWaitingLogSink sink;
+    // Sleeps give the sink threads time to do all their work,
+    // so that we get a reliable log capture to compare to the golden file.
+    LOG(INFO) << "Message 1";
+    SleepForMilliseconds(60);
+    LOG(ERROR) << "Message 2";
+    SleepForMilliseconds(60);
+    LOG(WARNING) << "Message 3";
+    SleepForMilliseconds(60);
+  }
+  for (int i = 0; i < global_messages.size(); ++i) {
+    LOG(INFO) << "Sink capture: " << global_messages[i];
+  }
+  CHECK_EQ(global_messages.size(), 3);
+}
+
+TEST(Strerror, logging) {
+  int errcode = EINTR;
+  char *msg = strdup(strerror(errcode));
+  char buf[strlen(msg) + 1];
+  CHECK_EQ(posix_strerror_r(errcode, NULL, 0), -1);
+  buf[0] = 'A';
+  CHECK_EQ(posix_strerror_r(errcode, buf, 0), -1);
+  CHECK_EQ(buf[0], 'A');
+  CHECK_EQ(posix_strerror_r(errcode, NULL, sizeof(buf)), -1);
+#if defined(OS_MACOSX) || defined(OS_FREEBSD)
+  // MacOSX or FreeBSD considers this case is an error since there is
+  // no enough space.
+  CHECK_EQ(posix_strerror_r(errcode, buf, 1), -1);
+#else
+  CHECK_EQ(posix_strerror_r(errcode, buf, 1), 0);
+#endif
+  CHECK_STREQ(buf, "");
+  CHECK_EQ(posix_strerror_r(errcode, buf, sizeof(buf)), 0);
+  CHECK_STREQ(buf, msg);
+  free(msg);
+}
+
+// Simple routines to look at the sizes of generated code for LOG(FATAL) and
+// CHECK(..) via objdump
+void MyFatal() {
+  LOG(FATAL) << "Failed";
+}
+void MyCheck(bool a, bool b) {
+  CHECK_EQ(a, b);
+}
+
+struct UserDefinedClass {
+  bool operator==(const UserDefinedClass& rhs) const { return true; }
+};
+
+inline ostream& operator<<(ostream& out, const UserDefinedClass& u) {
+  out << "OK";
+  return out;
+}
+
+TEST(UserDefinedClass, logging) {
+  UserDefinedClass u;
+  vector<string> buf;
+  LOG_STRING(INFO, &buf) << u;
+  CHECK_EQ(1, buf.size());
+  CHECK(buf[0].find("OK") != string::npos);
+
+  // We must be able to compile this.
+  CHECK_EQ(u, u);
+}
diff --git a/src/logging_unittest.err b/src/logging_unittest.err
new file mode 100644
index 0000000..7bf7066
--- /dev/null
+++ b/src/logging_unittest.err
@@ -0,0 +1,293 @@
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=2 logtostderr=0 alsologtostderr=0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+WARNING: Logging before InitGoogleLogging() is written to STDERR
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=0 logtostderr=0 alsologtostderr=0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] foo bar 10 3.4
+EDATE TIME__ logging_unittest.cc:LINE] Plog every 2, iteration 1: __SUCCESS__ [0]
+EDATE TIME__ logging_unittest.cc:LINE] Log every 3, iteration 1
+EDATE TIME__ logging_unittest.cc:LINE] Log every 4, iteration 1
+WDATE TIME__ logging_unittest.cc:LINE] Log if every 5, iteration 1
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 1
+EDATE TIME__ logging_unittest.cc:LINE] Log if less than 3 every 2, iteration 1
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 2
+EDATE TIME__ logging_unittest.cc:LINE] Plog every 2, iteration 3: __ENOENT__ [2]
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 3
+EDATE TIME__ logging_unittest.cc:LINE] Log if less than 3 every 2, iteration 3
+EDATE TIME__ logging_unittest.cc:LINE] Log every 3, iteration 4
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 4
+EDATE TIME__ logging_unittest.cc:LINE] Plog every 2, iteration 5: __EINTR__ [4]
+EDATE TIME__ logging_unittest.cc:LINE] Log every 4, iteration 5
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 5
+WDATE TIME__ logging_unittest.cc:LINE] Log if every 5, iteration 6
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 6
+EDATE TIME__ logging_unittest.cc:LINE] Plog every 2, iteration 7: __ENXIO__ [6]
+EDATE TIME__ logging_unittest.cc:LINE] Log every 3, iteration 7
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 7
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 8
+EDATE TIME__ logging_unittest.cc:LINE] Plog every 2, iteration 9: __ENOEXEC__ [8]
+EDATE TIME__ logging_unittest.cc:LINE] Log every 4, iteration 9
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 9
+EDATE TIME__ logging_unittest.cc:LINE] Log every 3, iteration 10
+IDATE TIME__ logging_unittest.cc:LINE] Log if every 1, iteration 10
+WDATE TIME__ logging_unittest.cc:LINE] log_if this
+IDATE TIME__ logging_unittest.cc:LINE] array
+IDATE TIME__ logging_unittest.cc:LINE] const array
+EDATE TIME__ logging_unittest.cc:LINE] foo 1000 0000001000 3e8
+no prefix
+IDATE TIME__ logging_unittest.cc:LINE] RAW: foo bar 10 3.400000
+WDATE TIME__ logging_unittest.cc:LINE] RAW: array
+IDATE TIME__ logging_unittest.cc:LINE] RAW: const array
+IDATE TIME__ logging_unittest.cc:LINE] RAW: ptr 0x12345678
+IDATE TIME__ logging_unittest.cc:LINE] RAW: ptr __NULLP__
+EDATE TIME__ logging_unittest.cc:LINE] RAW: foo 1000 0000001000 3e8
+IDATE TIME__ logging_unittest.cc:LINE] RAW: foo 1000
+IDATE TIME__ logging_unittest.cc:LINE] RAW: foo 1000
+WDATE TIME__ logging_unittest.cc:LINE] RAW: RAW_LOG ERROR: The Message was too long!
+IDATE TIME__ logging_unittest.cc:LINE] RAW: RAW_LOG ERROR: The Message was too long!
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0 on
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 1 on
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 2 on
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=0 logtostderr=0 alsologtostderr=0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=1 stderrthreshold=0 logtostderr=0 alsologtostderr=0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] vlog 1
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 1
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=-1 stderrthreshold=0 logtostderr=0 alsologtostderr=0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=1 logtostderr=0 alsologtostderr=0
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=2 logtostderr=0 alsologtostderr=0
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+EDATE TIME__ logging_unittest.cc:LINE] log error
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=3 logtostderr=0 alsologtostderr=0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=3 logtostderr=1 alsologtostderr=0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=0 stderrthreshold=3 logtostderr=0 alsologtostderr=1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=1 stderrthreshold=1 logtostderr=0 alsologtostderr=0
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Test: v=1 stderrthreshold=3 logtostderr=0 alsologtostderr=1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] RAW: vlog 1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: log info
+WDATE TIME__ logging_unittest.cc:LINE] RAW: log warning
+EDATE TIME__ logging_unittest.cc:LINE] RAW: log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog 0
+IDATE TIME__ logging_unittest.cc:LINE] vlog 1
+IDATE TIME__ logging_unittest.cc:LINE] log info
+WDATE TIME__ logging_unittest.cc:LINE] log warning
+EDATE TIME__ logging_unittest.cc:LINE] log error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if -1
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 1
+IDATE TIME__ logging_unittest.cc:LINE] log_if info
+WDATE TIME__ logging_unittest.cc:LINE] log_if warning
+EDATE TIME__ logging_unittest.cc:LINE] log_if error
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error expr
+IDATE TIME__ logging_unittest.cc:LINE] log_if info every 1 expr
+EDATE TIME__ logging_unittest.cc:LINE] log_if error every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] vlog_if 0 every 1 expr
+IDATE TIME__ logging_unittest.cc:LINE] LOG_STRING: reported info
+WDATE TIME__ logging_unittest.cc:LINE] LOG_STRING: reported warning
+EDATE TIME__ logging_unittest.cc:LINE] LOG_STRING: reported error
+IDATE TIME__ logging_unittest.cc:LINE] Captured by LOG_STRING:  LOG_STRING: collected info
+IDATE TIME__ logging_unittest.cc:LINE] Captured by LOG_STRING:  LOG_STRING: collected warning
+IDATE TIME__ logging_unittest.cc:LINE] Captured by LOG_STRING:  LOG_STRING: collected error
+IDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: collected info
+WDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: collected warning
+EDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: collected error
+IDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: reported info
+WDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: reported warning
+EDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: reported error
+IDATE TIME__ logging_unittest.cc:LINE] Captured by LOG_TO_SINK:
+IDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: collected info
+WDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: collected warning
+EDATE TIME__ logging_unittest.cc:LINE] LOG_TO_SINK: collected error
+IDATE TIME__ logging_unittest.cc:LINE] Message 1
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Buffering
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Buffered
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Waiting
+IDATE TIME__ THREADID logging_unittest.cc:LINE] RAW: Sink got a messages
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Waited
+IDATE TIME__ THREADID logging_unittest.cc:LINE] Sink is sending out a message: IDATE TIME__ logging_unittest.cc:LINE] Message 1
+IDATE TIME__ THREADID logging_unittest.cc:LINE] Have 0 left
+EDATE TIME__ logging_unittest.cc:LINE] Message 2
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Buffering
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Buffered
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Waiting
+IDATE TIME__ THREADID logging_unittest.cc:LINE] RAW: Sink got a messages
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Waited
+IDATE TIME__ THREADID logging_unittest.cc:LINE] Sink is sending out a message: EDATE TIME__ logging_unittest.cc:LINE] Message 2
+IDATE TIME__ THREADID logging_unittest.cc:LINE] Have 0 left
+WDATE TIME__ logging_unittest.cc:LINE] Message 3
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Buffering
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Buffered
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Waiting
+IDATE TIME__ THREADID logging_unittest.cc:LINE] RAW: Sink got a messages
+IDATE TIME__ logging_unittest.cc:LINE] RAW: Waited
+IDATE TIME__ THREADID logging_unittest.cc:LINE] Sink is sending out a message: WDATE TIME__ logging_unittest.cc:LINE] Message 3
+IDATE TIME__ THREADID logging_unittest.cc:LINE] Have 0 left
+IDATE TIME__ logging_unittest.cc:LINE] Sink capture: IDATE TIME__ logging_unittest.cc:LINE] Message 1
+IDATE TIME__ logging_unittest.cc:LINE] Sink capture: EDATE TIME__ logging_unittest.cc:LINE] Message 2
+IDATE TIME__ logging_unittest.cc:LINE] Sink capture: WDATE TIME__ logging_unittest.cc:LINE] Message 3
diff --git a/src/raw_logging.cc b/src/raw_logging.cc
new file mode 100644
index 0000000..f9e44df
--- /dev/null
+++ b/src/raw_logging.cc
@@ -0,0 +1,114 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Maxim Lifantsev
+//
+// logging_unittest.cc covers the functionality herein
+
+#include "utilities.h"
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <time.h>
+#include "config.h"
+#include "glog/logging.h"          // To pick up flag settings etc.
+#include "glog/raw_logging.h"
+
+#if defined(HAVE_SYSCALL_H)
+#include <syscall.h>                 // for syscall()
+#elif defined(HAVE_SYS_SYSCALL_H)
+#include <sys/syscall.h>                 // for syscall()
+#endif
+#include <unistd.h>
+
+#if defined(OS_MACOSX)
+#ifndef __DARWIN_UNIX03
+#define __DARWIN_UNIX03  // tells libgen.h to define basename()
+#endif
+#endif  // OS_MACOSX
+
+#include <libgen.h>                      // basename()
+
+_START_GOOGLE_NAMESPACE_
+
+// Data for RawLog__ below. We simply pick up the latest
+// time data created by a normal log message to avoid calling
+// localtime_r which can allocate memory.
+static struct ::tm last_tm_time_for_raw_log;
+
+void RawLog__SetLastTime(const struct ::tm& t) {
+  memcpy(&last_tm_time_for_raw_log, &t, sizeof(last_tm_time_for_raw_log));
+}
+
+// CAVEAT: vsnprintf called from *DoRawLog below has some (exotic) code paths
+// that invoke malloc() and getenv() that might acquire some locks.
+// If this becomes a problem we should reimplement a subset of vsnprintf
+// that does not need locks and malloc.
+
+// Helper for RawLog__ below.
+// *DoRawLog writes to *buf of *size and move them past the written portion.
+// It returns true iff there was no overflow or error.
+static bool DoRawLog(char** buf, int* size, const char* format, ...) {
+  va_list ap;
+  va_start(ap, format);
+  int n = vsnprintf(*buf, *size, format, ap);
+  va_end(ap);
+  if (n < 0 || n > *size) return false;
+  *size -= n;
+  *buf += n;
+  return true;
+}
+
+// Helper for RawLog__ below.
+inline static bool VADoRawLog(char** buf, int* size,
+                              const char* format, va_list ap) {
+  int n = vsnprintf(*buf, *size, format, ap);
+  if (n < 0 || n > *size) return false;
+  *size -= n;
+  *buf += n;
+  return true;
+}
+
+void RawLog__(LogSeverity severity, const char* file, int line,
+              const char* format, ...) {
+  if (!(FLAGS_logtostderr || severity >= FLAGS_stderrthreshold ||
+        FLAGS_alsologtostderr || !IsGoogleLoggingInitialized())) {
+    return;  // this stderr log message is suppressed
+  }
+  // can't call localtime_r here: it can allocate
+  struct ::tm& t = last_tm_time_for_raw_log;
+  char buffer[3000];  // 3000 bytes should be enough for everyone... :-)
+  char* buf = buffer;
+  int size = sizeof(buffer);
+  if (is_default_thread()) {
+     DoRawLog(&buf, &size, "%c%02d%02d %02d%02d%02d %s:%d] RAW: ",
+              LogSeverityNames[severity][0],
+              1 + t.tm_mon, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec,
+              basename(const_cast<char *>(file)), line);
+  } else {
+    DoRawLog(&buf, &size, "%c%02d%02d %02d%02d%02d %08x %s:%d] RAW: ",
+             LogSeverityNames[severity][0],
+             1 + t.tm_mon, t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec,
+             int(pthread_self()),
+             basename(const_cast<char *>(file)), line);
+  }
+  va_list ap;
+  va_start(ap, format);
+  bool no_chop = VADoRawLog(&buf, &size, format, ap);
+  va_end(ap);
+  if (no_chop) {
+    DoRawLog(&buf, &size, "\n");
+  } else {
+    DoRawLog(&buf, &size, "RAW_LOG ERROR: The Message was too long!\n");
+  }
+  // We make a raw syscall to write directly to the stderr file descriptor,
+  // avoiding FILE buffering (to avoid invoking malloc()), and bypassing
+  // libc (to side-step any libc interception).
+  // We write just once to avoid races with other invocations of RawLog__.
+#if defined(HAVE_SYSCALL_H) || defined(HAVE_SYS_SYSCALL_H)
+  syscall(SYS_write, STDERR_FILENO, buffer, strlen(buffer));
+#else
+  write(STDERR_FILENO, buffer, strlen(buffer));
+#endif
+  if (severity == FATAL)  LogMessage::Fail();
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/stacktrace.cc b/src/stacktrace.cc
new file mode 100644
index 0000000..1f65c5b
--- /dev/null
+++ b/src/stacktrace.cc
@@ -0,0 +1,68 @@
+// Copyright 2000 - 2007 Google Inc.
+// All rights reserved.
+//
+// Produce stack trace.
+//
+// There are three different ways we can try to get the stack trace:
+//
+// 1) Our hand-coded stack-unwinder.  This depends on a certain stack
+//    layout, which is used by gcc (and those systems using a
+//    gcc-compatible ABI) on x86 systems, at least since gcc 2.95.
+//    It uses the frame pointer to do its work.
+//
+// 2) The libunwind library.  This is still in development, and as a
+//    separate library adds a new dependency, abut doesn't need a frame
+//    pointer.  It also doesn't call malloc.
+//
+// 3) The gdb unwinder -- also the one used by the c++ exception code.
+//    It's obviously well-tested, but has a fatal flaw: it can call
+//    malloc() from the unwinder.  This is a problem because we're
+//    trying to use the unwinder to instrument malloc().
+//
+// Note: if you add a new implementation here, make sure it works
+// correctly when GetStackTrace() is called with max_depth == 0.
+// Some code may do that.
+
+#include "config.h"
+
+// First, the i386 case.
+#if defined(__i386__) && __GNUC__ >= 2
+# if defined(HAVE_EXECINFO_H)
+#   include "stacktrace_generic-inl.h"
+# elif !defined(NO_FRAME_POINTER)
+#   include "stacktrace_x86-inl.h"
+# endif
+
+// Now, the x86_64 case.
+#elif defined(__x86_64__) && __GNUC__ >= 2
+# if defined(HAVE_EXECINFO_H)
+#   include "stacktrace_generic-inl.h"
+# elif !defined(NO_FRAME_POINTER)
+#   include "stacktrace_x86-inl.h"
+# elif 1
+    // This is the unwinder used by gdb, which can call malloc (see above).
+#   include "stacktrace_x86_64-inl.h"
+# elif 0     // We assume libunwind is installed on this machine
+    // Use the libunwind library.
+    // There's no way to enable it except for manually
+    // editing this file (by replacing this "elif 0" with "elif 1", e.g.).
+#   define UNW_LOCAL_ONLY
+#   include "stacktrace_libunwind-inl.h"
+# elif defined(__linux)
+#   error Cannnot calculate stack trace: need either libunwind or frame-pointers
+# else
+#   error Cannnot calculate stack trace: need libunwind
+# endif
+
+// The PowerPC case
+#elif (defined(__ppc__) || defined(__PPC__)) && __GNUC__ >= 2
+# if defined(HAVE_EXECINFO_H)
+#   include "stacktrace_generic-inl.h"
+# elif defined(STACKTRACE_WITH_FRAME_POINTER)
+#   include "stacktrace_powerpc-inl.h"
+# endif
+
+// OK, those are all the processors we know how to deal with.
+#else
+# error Cannot calculate stack trace: will need to write for your environment
+#endif
diff --git a/src/stacktrace.h b/src/stacktrace.h
new file mode 100644
index 0000000..d729880
--- /dev/null
+++ b/src/stacktrace.h
@@ -0,0 +1,68 @@
+// Copyright 2000 - 2007 Google Inc.
+// All rights reserved.
+//
+// Routines to extract the current stack trace.  These functions are
+// thread-safe.
+
+#ifndef BASE_STACKTRACE_H_
+#define BASE_STACKTRACE_H_
+
+#include "config.h"
+
+_START_GOOGLE_NAMESPACE_
+
+// Skips the most recent "skip_count" stack frames (also skips the
+// frame generated for the "GetStackFrames" routine itself), and then
+// records the pc values for up to the next "max_depth" frames in
+// "pcs", and the corresponding stack frame sizes in "sizes".  Returns
+// the number of values recorded in "pcs"/"sizes".
+//
+// Example:
+//      main() { foo(); }
+//      foo() { bar(); }
+//      bar() {
+//        void* pcs[10];
+//        int sizes[10];
+//        int depth = GetStackFrames(pcs, sizes, 10, 1);
+//      }
+//
+// The GetStackFrames call will skip the frame for "bar".  It will
+// return 2 and will produce pc values that map to the following
+// procedures:
+//      pcs[0]       foo
+//      pcs[1]       main
+// (Actually, there may be a few more entries after "main" to account for
+// startup procedures.)
+// And corresponding stack frame sizes will also be recorded:
+//    sizes[0]       16
+//    sizes[1]       16
+// (Stack frame sizes of 16 above are just for illustration purposes.)
+// Stack frame sizes of 0 or less indicate that those frame sizes couldn't
+// be identified.
+//
+// This routine may return fewer stack frame entries than are
+// available. Also note that "pcs" and "sizes" must both be non-NULL.
+extern int GetStackFrames(void** pcs, int* sizes, int max_depth,
+                          int skip_count);
+
+// This is similar to the GetStackFrames routine, except that it returns
+// the stack trace only, and not the stack frame sizes as well.
+// Example:
+//      main() { foo(); }
+//      foo() { bar(); }
+//      bar() {
+//        void* result[10];
+//        int depth = GetStackFrames(result, 10, 1);
+//      }
+//
+// This produces:
+//      result[0]       foo
+//      result[1]       main
+//           ....       ...
+//
+// "result" must not be NULL.
+extern int GetStackTrace(void** result, int max_depth, int skip_count);
+
+_END_GOOGLE_NAMESPACE_
+
+#endif  // BASE_STACKTRACE_H_
diff --git a/src/stacktrace_framesizes_unittest.cc b/src/stacktrace_framesizes_unittest.cc
new file mode 100644
index 0000000..58e893d
--- /dev/null
+++ b/src/stacktrace_framesizes_unittest.cc
@@ -0,0 +1,119 @@
+// Copyright 2007 Google Inc. All Rights Reserved.
+// Author: Raksit Ashok
+//
+// Unit test for the GetStackFrames function in stacktrace.cc.
+
+#include <stdio.h>
+#include "glog/logging.h"
+#include "base/commandlineflags.h"
+#include "stacktrace.h"
+#include "config.h"
+#include "utilities.h"
+
+using std::min;
+using namespace GOOGLE_NAMESPACE;
+
+#ifdef HAVE_STACKTRACE
+
+// Obtain a backtrace of the stack frame sizes, verify that they look sane.
+
+//-----------------------------------------------------------------------//
+int CheckFrameSizesLeaf(int32* i);  // 8KB frame size.
+int CheckFrameSizes2(int32* i);     // 4KB
+int CheckFrameSizes1(int32* i);     // 2KB
+int CheckFrameSizes(int32* i);      // 1KB
+//-----------------------------------------------------------------------//
+
+// The expected frame-sizes in the backtrace.
+const int BACKTRACE_STEPS = 4;
+int expected_frame_sizes[BACKTRACE_STEPS] = {
+  1 << 13,
+  1 << 12,
+  1 << 11,
+  1 << 10,
+};
+
+//-----------------------------------------------------------------------//
+
+void CheckFrameSizeIsOk(int actual_frame_size, int ref_frame_size) {
+  // Assume upto 512 bytes of miscellaneous stuff in CheckFrameSizes* frames.
+  const int misc_frame_size = 512;
+  CHECK_GE(actual_frame_size, ref_frame_size);
+  CHECK_LE(actual_frame_size, ref_frame_size + misc_frame_size);
+}
+
+//-----------------------------------------------------------------------//
+
+int ATTRIBUTE_NOINLINE CheckFrameSizesLeaf(int32 *i) {
+  const int DEPTH = 10;
+  void* pcs[DEPTH];
+  int frame_sizes[DEPTH];
+  int size;
+  int32 j[2048];  // 8KB.
+  for (int k = 0; k < 2048; k++) j[k] = k + i[k % 1024];
+
+  for (int depth = 0; depth < DEPTH; depth++) {
+    size = GetStackFrames(pcs, frame_sizes, depth, 0);
+    printf("--- GetStackFrames(..., %d, 0) = %d\n", depth, size);
+    CHECK_LE(size, depth);
+    CHECK_GE(size, min(depth, BACKTRACE_STEPS));
+
+    for (int k = 0; k < size; k++) {
+      if (k < BACKTRACE_STEPS)
+    // GetStackFrames doesn't work correctly if we are using glibc's backtrace.
+#ifndef HAVE_EXECINFO_H
+        CheckFrameSizeIsOk(frame_sizes[k], expected_frame_sizes[k]);
+#endif
+      printf("frame_sizes[%d] = %d\n", k, frame_sizes[k]);
+    }
+  }
+
+  int sum = 0;
+  for (int k = 0; k < 2048; k++) sum += j[k];
+  return sum;
+}
+
+//-----------------------------------------------------------------------//
+
+/* Dummy functions to make the frame-size backtrace more interesting. */
+int ATTRIBUTE_NOINLINE CheckFrameSizes2(int32* i) {
+  int32 j[1024];  // 4KB.
+  for (int k = 0; k < 1024; k++) j[k] = k + i[k % 512];
+  return CheckFrameSizesLeaf(j) + j[512];
+}
+
+int ATTRIBUTE_NOINLINE CheckFrameSizes1(int32* i) {
+  int32 j[512];  // 2KB.
+  for (int k = 0; k < 512; k++) j[k] = k + i[k % 256];
+  return CheckFrameSizes2(j) + j[256];
+}
+
+int ATTRIBUTE_NOINLINE CheckFrameSizes(int32* i)  {
+  int32 j[256];  // 1KB.
+  for (int k = 0; k < 256; k++) j[k] = k + i[k];
+  return CheckFrameSizes1(j) + j[128];
+}
+
+//-----------------------------------------------------------------------//
+
+int main(int argc, char ** argv) {
+  FLAGS_logtostderr = true;
+  InitGoogleLogging(argv[0]);
+
+  int32 i[256];  // 1KB.
+  for (int j = 0; j < 256; j++) i[j] = j;
+  
+  int ret = CheckFrameSizes(i);
+
+  printf("CheckFrameSizes returned: %d\n", ret);
+
+  printf("PASS\n");
+  return 0;
+}
+
+#else
+int main() {
+  printf("PASS (no stacktrace support)\n");
+  return 0;
+}
+#endif  // HAVE_STACKTRACE
diff --git a/src/stacktrace_generic-inl.h b/src/stacktrace_generic-inl.h
new file mode 100644
index 0000000..27db893
--- /dev/null
+++ b/src/stacktrace_generic-inl.h
@@ -0,0 +1,81 @@
+// Copyright 2000 - 2007 Google Inc.
+// All rights reserved.
+//
+// Portable implementation - just use glibc
+//
+// Note:  The glibc implementation may cause a call to malloc.
+// This can cause a deadlock in HeapProfiler.
+#include <execinfo.h>
+#include <string.h>
+#include "stacktrace.h"
+
+_START_GOOGLE_NAMESPACE_
+
+// If you change this function, also change GetStackFrames below.
+int GetStackTrace(void** result, int max_depth, int skip_count) {
+  static const int kStackLength = 64;
+  void * stack[kStackLength];
+  int size;
+
+  size = backtrace(stack, kStackLength);
+  skip_count++;  // we want to skip the current frame as well
+  int result_count = size - skip_count;
+  if (result_count < 0)
+    result_count = 0;
+  if (result_count > max_depth)
+    result_count = max_depth;
+  for (int i = 0; i < result_count; i++)
+    result[i] = stack[i + skip_count];
+
+  return result_count;
+}
+
+// If you change this function, also change GetStackTrace above:
+//
+// This GetStackFrames routine shares a lot of code with GetStackTrace
+// above. This code could have been refactored into a common routine,
+// and then both GetStackTrace/GetStackFrames could call that routine.
+// There are two problems with that:
+//
+// (1) The performance of the refactored-code suffers substantially - the
+//     refactored needs to be able to record the stack trace when called
+//     from GetStackTrace, and both the stack trace and stack frame sizes,
+//     when called from GetStackFrames - this introduces enough new
+//     conditionals that GetStackTrace performance can degrade by as much
+//     as 50%.
+//
+// (2) Whether the refactored routine gets inlined into GetStackTrace and
+//     GetStackFrames depends on the compiler, and we can't guarantee the
+//     behavior either-way, even with "__attribute__ ((always_inline))"
+//     or "__attribute__ ((noinline))". But we need this guarantee or the
+//     frame counts may be off by one.
+//
+// Both (1) and (2) can be addressed without this code duplication, by
+// clever use of template functions, and by defining GetStackTrace and
+// GetStackFrames as macros that expand to these template functions.
+// However, this approach comes with its own set of problems - namely,
+// macros and  preprocessor trouble - for example,  if GetStackTrace
+// and/or GetStackFrames is ever defined as a member functions in some
+// class, we are in trouble.
+int GetStackFrames(void** pcs, int* sizes, int max_depth, int skip_count) {
+  static const int kStackLength = 64;
+  void * stack[kStackLength];
+  int size;
+
+  size = backtrace(stack, kStackLength);
+  skip_count++;  // we want to skip the current frame as well
+  int result_count = size - skip_count;
+  if (result_count < 0)
+    result_count = 0;
+  if (result_count > max_depth)
+    result_count = max_depth;
+  for (int i = 0; i < result_count; i++)
+    pcs[i] = stack[i + skip_count];
+
+  // No implementation for finding out the stack frame sizes yet.
+  memset(sizes, 0, sizeof(*sizes) * result_count);
+
+  return result_count;
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/stacktrace_libunwind-inl.h b/src/stacktrace_libunwind-inl.h
new file mode 100644
index 0000000..f927a57
--- /dev/null
+++ b/src/stacktrace_libunwind-inl.h
@@ -0,0 +1,127 @@
+// Copyright 2005 - 2007 Google Inc.
+// All rights reserved.
+//
+// Author: Arun Sharma
+//
+// Produce stack trace using libunwind
+
+extern "C" {
+#include <libunwind.h>
+}
+#include "base/stacktrace.h"
+#include "base/raw_logging.h"
+#include "base/spinlock.h"
+
+_START_GOOGLE_NAMESPACE_
+
+// Sometimes, we can try to get a stack trace from within a stack
+// trace, because libunwind can call mmap/sbrk (maybe indirectly via
+// malloc), and that mmap gets trapped and causes a stack-trace
+// request.  If were to try to honor that recursive request, we'd end
+// up with infinite recursion or deadlock.  Luckily, it's safe to
+// ignore those subsequent traces.  In such cases, we return 0 to
+// indicate the situation.
+static SpinLock libunwind_lock(SpinLock::LINKER_INITIALIZED);
+
+// If you change this function, also change GetStackFrames below.
+int GetStackTrace(void** result, int max_depth, int skip_count) {
+  void *ip;
+  int n = 0;
+  unw_cursor_t cursor;
+  unw_context_t uc;
+
+  if (!libunwind_lock.TryLock()) {
+    return 0;
+  }
+
+  unw_getcontext(&uc);
+  RAW_CHECK(unw_init_local(&cursor, &uc) >= 0, "unw_init_local failed");
+  skip_count++;         // Do not include the "GetStackTrace" frame
+
+  while (n < max_depth) {
+    int ret = unw_get_reg(&cursor, UNW_REG_IP, (unw_word_t *) &ip);
+    if (ret < 0)
+      break;
+    if (skip_count > 0) {
+      skip_count--;
+    } else {
+      result[n++] = ip;
+    }
+    ret = unw_step(&cursor);
+    if (ret <= 0)
+      break;
+  }
+
+  libunwind_lock.Unlock();
+  return n;
+}
+
+// If you change this function, also change GetStackTrace above:
+//
+// This GetStackFrames routine shares a lot of code with GetStackTrace
+// above. This code could have been refactored into a common routine,
+// and then both GetStackTrace/GetStackFrames could call that routine.
+// There are two problems with that:
+//
+// (1) The performance of the refactored-code suffers substantially - the
+//     refactored needs to be able to record the stack trace when called
+//     from GetStackTrace, and both the stack trace and stack frame sizes,
+//     when called from GetStackFrames - this introduces enough new
+//     conditionals that GetStackTrace performance can degrade by as much
+//     as 50%.
+//
+// (2) Whether the refactored routine gets inlined into GetStackTrace and
+//     GetStackFrames depends on the compiler, and we can't guarantee the
+//     behavior either-way, even with "__attribute__ ((always_inline))"
+//     or "__attribute__ ((noinline))". But we need this guarantee or the
+//     frame counts may be off by one.
+//
+// Both (1) and (2) can be addressed without this code duplication, by
+// clever use of template functions, and by defining GetStackTrace and
+// GetStackFrames as macros that expand to these template functions.
+// However, this approach comes with its own set of problems - namely,
+// macros and  preprocessor trouble - for example,  if GetStackTrace
+// and/or GetStackFrames is ever defined as a member functions in some
+// class, we are in trouble.
+int GetStackFrames(void** pcs, int* sizes, int max_depth, int skip_count) {
+  void *ip;
+  int n = 0;
+  unw_cursor_t cursor;
+  unw_context_t uc;
+  unw_word_t sp = 0, next_sp = 0;
+
+  if (!libunwind_lock.TryLock()) {
+    return 0;
+  }
+
+  unw_getcontext(&uc);
+  RAW_CHECK(unw_init_local(&cursor, &uc) >= 0, "unw_init_local failed");
+  skip_count++;         // Do not include the "GetStackFrames" frame
+
+  while (skip_count--) {
+    if (unw_step(&cursor) <= 0 ||
+        unw_get_reg(&cursor, UNW_REG_SP, &next_sp) < 0) {
+      goto out;
+    }
+  }
+  while (n < max_depth) {
+    sp = next_sp;
+    if (unw_get_reg(&cursor, UNW_REG_IP, (unw_word_t *) &ip) < 0)
+      break;
+    if (unw_step(&cursor) <= 0 ||
+        unw_get_reg(&cursor, UNW_REG_SP, &next_sp)) {
+      // We couldn't step any further (possibly because we reached _start).
+      // Provide the last good PC we've got, and get out.
+      sizes[n] = 0;
+      pcs[n++] = ip;
+      break;
+    }
+    sizes[n] = next_sp - sp;
+    pcs[n++] = ip;
+  }
+ out:
+  libunwind_lock.Unlock();
+  return n;
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/stacktrace_powerpc-inl.h b/src/stacktrace_powerpc-inl.h
new file mode 100644
index 0000000..82ce1ab
--- /dev/null
+++ b/src/stacktrace_powerpc-inl.h
@@ -0,0 +1,182 @@
+// Copyright 2007 and onwards Google Inc.
+// All rights reserved.
+//
+// Author: Craig Silverstein
+//
+// Produce stack trace.  I'm guessing (hoping!) the code is much like
+// for x86.  For apple machines, at least, it seems to be; see
+//    http://developer.apple.com/documentation/mac/runtimehtml/RTArch-59.html
+//    http://www.linux-foundation.org/spec/ELF/ppc64/PPC-elf64abi-1.9.html#STACK
+// Linux has similar code: http://patchwork.ozlabs.org/linuxppc/patch?id=8882
+
+#include <stdio.h>
+#include <stdint.h>   // for uintptr_t
+#include "stacktrace.h"
+
+_START_GOOGLE_NAMESPACE_
+
+// Given a pointer to a stack frame, locate and return the calling
+// stackframe, or return NULL if no stackframe can be found. Perform sanity
+// checks (the strictness of which is controlled by the boolean parameter
+// "STRICT_UNWINDING") to reduce the chance that a bad pointer is returned.
+template<bool STRICT_UNWINDING>
+static void **NextStackFrame(void **old_sp) {
+  void **new_sp = (void **) *old_sp;
+
+  // Check that the transition from frame pointer old_sp to frame
+  // pointer new_sp isn't clearly bogus
+  if (STRICT_UNWINDING) {
+    // With the stack growing downwards, older stack frame must be
+    // at a greater address that the current one.
+    if (new_sp <= old_sp) return NULL;
+    // Assume stack frames larger than 100,000 bytes are bogus.
+    if ((uintptr_t)new_sp - (uintptr_t)old_sp > 100000) return NULL;
+  } else {
+    // In the non-strict mode, allow discontiguous stack frames.
+    // (alternate-signal-stacks for example).
+    if (new_sp == old_sp) return NULL;
+    // And allow frames upto about 1MB.
+    if ((new_sp > old_sp)
+        && ((uintptr_t)new_sp - (uintptr_t)old_sp > 1000000)) return NULL;
+  }
+  if ((uintptr_t)new_sp & (sizeof(void *) - 1)) return NULL;
+  return new_sp;
+}
+
+// This ensures that GetStackTrace stes up the Link Register properly.
+void StacktracePowerPCDummyFunction() __attribute__((noinline));
+void StacktracePowerPCDummyFunction() { __asm__ volatile(""); }
+
+// If you change this function, also change GetStackFrames below.
+int GetStackTrace(void** result, int max_depth, int skip_count) {
+  void **sp;
+  // Apple OS X uses an old version of gnu as -- both Darwin 7.9.0 (Panther)
+  // and Darwin 8.8.1 (Tiger) use as 1.38.  This means we have to use a
+  // different asm syntax.  I don't know quite the best way to discriminate
+  // systems using the old as from the new one; I've gone with __APPLE__.
+#ifdef __APPLE__
+  __asm__ volatile ("mr %0,r1" : "=r" (sp));
+#else
+  __asm__ volatile ("mr %0,1" : "=r" (sp));
+#endif
+
+  // On PowerPC, the "Link Register" or "Link Record" (LR), is a stack
+  // entry that holds the return address of the subroutine call (what
+  // instruction we run after our function finishes).  This is the
+  // same as the stack-pointer of our parent routine, which is what we
+  // want here.  While the compiler will always(?) set up LR for
+  // subroutine calls, it may not for leaf functions (such as this one).
+  // This routine forces the compiler (at least gcc) to push it anyway.
+  StacktracePowerPCDummyFunction();
+
+  // The LR save area is used by the callee, so the top entry is bogus.
+  skip_count++;
+
+  int n = 0;
+  while (sp && n < max_depth) {
+    if (skip_count > 0) {
+      skip_count--;
+    } else {
+      // PowerPC has 3 main ABIs, which say where in the stack the
+      // Link Register is.  For DARWIN and AIX (used by apple and
+      // linux ppc64), it's in sp[2].  For SYSV (used by linux ppc),
+      // it's in sp[1].
+#if defined(_CALL_AIX) || defined(_CALL_DARWIN)
+      result[n++] = *(sp+2);
+#elif defined(_CALL_SYSV)
+      result[n++] = *(sp+1);
+#elif defined(__APPLE__) || (defined(__linux) && defined(__PPC64__))
+      // This check is in case the compiler doesn't define _CALL_AIX/etc.
+      result[n++] = *(sp+2);
+#elif defined(__linux)
+      // This check is in case the compiler doesn't define _CALL_SYSV.
+      result[n++] = *(sp+1);
+#else
+#error Need to specify the PPC ABI for your archiecture.
+#endif
+    }
+    // Use strict unwinding rules.
+    sp = NextStackFrame<true>(sp);
+  }
+  return n;
+}
+
+// If you change this function, also change GetStackTrace above:
+//
+// This GetStackFrames routine shares a lot of code with GetStackTrace
+// above. This code could have been refactored into a common routine,
+// and then both GetStackTrace/GetStackFrames could call that routine.
+// There are two problems with that:
+//
+// (1) The performance of the refactored-code suffers substantially - the
+//     refactored needs to be able to record the stack trace when called
+//     from GetStackTrace, and both the stack trace and stack frame sizes,
+//     when called from GetStackFrames - this introduces enough new
+//     conditionals that GetStackTrace performance can degrade by as much
+//     as 50%.
+//
+// (2) Whether the refactored routine gets inlined into GetStackTrace and
+//     GetStackFrames depends on the compiler, and we can't guarantee the
+//     behavior either-way, even with "__attribute__ ((always_inline))"
+//     or "__attribute__ ((noinline))". But we need this guarantee or the
+//     frame counts may be off by one.
+//
+// Both (1) and (2) can be addressed without this code duplication, by
+// clever use of template functions, and by defining GetStackTrace and
+// GetStackFrames as macros that expand to these template functions.
+// However, this approach comes with its own set of problems - namely,
+// macros and  preprocessor trouble - for example,  if GetStackTrace
+// and/or GetStackFrames is ever defined as a member functions in some
+// class, we are in trouble.
+int GetStackFrames(void** pcs, int *sizes, int max_depth, int skip_count) {
+  void **sp;
+#ifdef __APPLE__
+  __asm__ volatile ("mr %0,r1" : "=r" (sp));
+#else
+  __asm__ volatile ("mr %0,1" : "=r" (sp));
+#endif
+
+  StacktracePowerPCDummyFunction();
+  // Note we do *not* increment skip_count here for the SYSV ABI.  If
+  // we did, the list of stack frames wouldn't properly match up with
+  // the list of return addresses.  Note this means the top pc entry
+  // is probably bogus for linux/ppc (and other SYSV-ABI systems).
+
+  int n = 0;
+  while (sp && n < max_depth) {
+    // The GetStackFrames routine is called when we are in some
+    // informational context (the failure signal handler for example).
+    // Use the non-strict unwinding rules to produce a stack trace
+    // that is as complete as possible (even if it contains a few bogus
+    // entries in some rare cases).
+    void **next_sp = NextStackFrame<false>(sp);
+    if (skip_count > 0) {
+      skip_count--;
+    } else {
+#if defined(_CALL_AIX) || defined(_CALL_DARWIN)
+      pcs[n++] = *(sp+2);
+#elif defined(_CALL_SYSV)
+      pcs[n++] = *(sp+1);
+#elif defined(__APPLE__) || (defined(__linux) && defined(__PPC64__))
+      // This check is in case the compiler doesn't define _CALL_AIX/etc.
+      pcs[n++] = *(sp+2);
+#elif defined(__linux)
+      // This check is in case the compiler doesn't define _CALL_SYSV.
+      pcs[n++] = *(sp+1);
+#else
+#error Need to specify the PPC ABI for your archiecture.
+#endif
+      if (next_sp > sp) {
+        sizes[n] = (uintptr_t)next_sp - (uintptr_t)sp;
+      } else {
+        // A frame-size of 0 is used to indicate unknown frame size.
+        sizes[n] = 0;
+      }
+      n++;
+    }
+    sp = next_sp;
+  }
+  return n;
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/stacktrace_unittest.cc b/src/stacktrace_unittest.cc
new file mode 100644
index 0000000..015579f
--- /dev/null
+++ b/src/stacktrace_unittest.cc
@@ -0,0 +1,124 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include "config.h"
+#include "utilities.h"
+#include "base/commandlineflags.h"
+#include "glog/logging.h"
+#include "stacktrace.h"
+
+#ifdef HAVE_EXECINFO_H
+# include <execinfo.h>
+#endif
+
+using namespace GOOGLE_NAMESPACE;
+
+#ifdef HAVE_STACKTRACE
+
+// Obtain a backtrace, verify that the expected callers are present in the
+// backtrace, and maybe print the backtrace to stdout.
+
+//-----------------------------------------------------------------------//
+void CheckStackTraceLeaf();
+void CheckStackTrace4(int i);
+void CheckStackTrace3(int i);
+void CheckStackTrace2(int i);
+void CheckStackTrace1(int i);
+void CheckStackTrace(int i);
+//-----------------------------------------------------------------------//
+
+// The sequence of functions whose return addresses we expect to see in the
+// backtrace.
+const int BACKTRACE_STEPS = 6;
+void * expected_stack[BACKTRACE_STEPS] = {
+  (void *) &CheckStackTraceLeaf,
+  (void *) &CheckStackTrace4,
+  (void *) &CheckStackTrace3,
+  (void *) &CheckStackTrace2,
+  (void *) &CheckStackTrace1,
+  (void *) &CheckStackTrace,
+};
+
+// Depending on the architecture/compiler/libraries, (not sure which)
+// the current function may or may not appear in the backtrace.
+// For gcc-2:
+//
+// stack[0] is ret addr within CheckStackTrace4
+// stack[1] is ret addr within CheckStackTrace3
+// stack[2] is ret addr within CheckStackTrace2
+// stack[3] is ret addr within CheckStackTrace1
+// stack[4] is ret addr within CheckStackTrace
+//
+// For gcc3-k8:
+//
+// stack[0] is ret addr within CheckStackTraceLeaf
+// stack[1] is ret addr within CheckStackTrace4
+// ...
+// stack[5] is ret addr within CheckStackTrace
+
+//-----------------------------------------------------------------------//
+
+const int kMaxFnLen = 0x40; // assume relevant functions are only this long
+
+void CheckRetAddrIsInFunction( void * ret_addr, void * function_start_addr)
+{
+  CHECK_GE(ret_addr, function_start_addr);
+  CHECK_LE(ret_addr, (void *) ((char *) function_start_addr + kMaxFnLen));
+}
+
+//-----------------------------------------------------------------------//
+
+void CheckStackTraceLeaf(void) {
+  const int STACK_LEN = 10;
+  void *stack[STACK_LEN];
+  int size;
+
+  size = GetStackTrace(stack, STACK_LEN, 0);
+  printf("Obtained %d stack frames.\n", size);
+  CHECK_LE(size, STACK_LEN);
+
+  if (1) {
+#ifdef HAVE_EXECINFO_H
+    char **strings = backtrace_symbols(stack, size);
+    printf("Obtained %d stack frames.\n", size);
+    for (int i = 0; i < size; i++)
+      printf("%s %p\n", strings[i], stack[i]);
+    printf("CheckStackTrace() addr: %p\n", &CheckStackTrace);
+    free(strings);
+#endif
+  }
+  for (int i = 0; i < BACKTRACE_STEPS; i++) {
+    printf("Backtrace %d: expected: %p..%p  actual: %p ... ",
+           i, expected_stack[i],
+           reinterpret_cast<char*>(expected_stack[i]) + kMaxFnLen, stack[i]);
+    CheckRetAddrIsInFunction(stack[i], expected_stack[i]);
+    printf("OK\n");
+  }
+}
+
+//-----------------------------------------------------------------------//
+
+/* Dummy functions to make the backtrace more interesting. */
+void CheckStackTrace4(int i) { for (int j = i; j >= 0; j--) CheckStackTraceLeaf(); }
+void CheckStackTrace3(int i) { for (int j = i; j >= 0; j--) CheckStackTrace4(j); }
+void CheckStackTrace2(int i) { for (int j = i; j >= 0; j--) CheckStackTrace3(j); }
+void CheckStackTrace1(int i) { for (int j = i; j >= 0; j--) CheckStackTrace2(j); }
+void CheckStackTrace(int i)  { for (int j = i; j >= 0; j--) CheckStackTrace1(j); }
+
+//-----------------------------------------------------------------------//
+
+int main(int argc, char ** argv) {
+  FLAGS_logtostderr = true;
+  InitGoogleLogging(argv[0]);
+  
+  CheckStackTrace(0);
+  
+  printf("PASS\n");
+  return 0;
+}
+
+#else
+int main() {
+  printf("PASS (no stacktrace support)\n");
+  return 0;
+}
+#endif  // HAVE_STACKTRACE
diff --git a/src/stacktrace_x86-inl.h b/src/stacktrace_x86-inl.h
new file mode 100644
index 0000000..676ce35
--- /dev/null
+++ b/src/stacktrace_x86-inl.h
@@ -0,0 +1,197 @@
+// Copyright 2000 - 2007 Google Inc.
+// All rights reserved.
+//
+// Produce stack trace
+
+#include <stdint.h>   // for uintptr_t
+
+#include "utilities.h"   // for OS_* macros
+
+#if !defined(OS_WINDOWS)
+#include <unistd.h>
+#include <sys/mman.h>
+#endif
+
+#include <stdio.h>  // for NULL
+#include "stacktrace.h"
+
+_START_GOOGLE_NAMESPACE_
+
+// Given a pointer to a stack frame, locate and return the calling
+// stackframe, or return NULL if no stackframe can be found. Perform sanity
+// checks (the strictness of which is controlled by the boolean parameter
+// "STRICT_UNWINDING") to reduce the chance that a bad pointer is returned.
+template<bool STRICT_UNWINDING>
+static void **NextStackFrame(void **old_sp) {
+  void **new_sp = (void **) *old_sp;
+
+  // Check that the transition from frame pointer old_sp to frame
+  // pointer new_sp isn't clearly bogus
+  if (STRICT_UNWINDING) {
+    // With the stack growing downwards, older stack frame must be
+    // at a greater address that the current one.
+    if (new_sp <= old_sp) return NULL;
+    // Assume stack frames larger than 100,000 bytes are bogus.
+    if ((uintptr_t)new_sp - (uintptr_t)old_sp > 100000) return NULL;
+  } else {
+    // In the non-strict mode, allow discontiguous stack frames.
+    // (alternate-signal-stacks for example).
+    if (new_sp == old_sp) return NULL;
+    // And allow frames upto about 1MB.
+    if ((new_sp > old_sp)
+        && ((uintptr_t)new_sp - (uintptr_t)old_sp > 1000000)) return NULL;
+  }
+  if ((uintptr_t)new_sp & (sizeof(void *) - 1)) return NULL;
+#ifdef __i386__
+  // On 64-bit machines, the stack pointer can be very close to
+  // 0xffffffff, so we explicitly check for a pointer into the
+  // last two pages in the address space
+  if ((uintptr_t)new_sp >= 0xffffe000) return NULL;
+#endif
+#if !defined(OS_WINDOWS)
+  if (!STRICT_UNWINDING) {
+    // Lax sanity checks cause a crash in 32-bit tcmalloc/crash_reason_test
+    // on AMD-based machines with VDSO-enabled kernels.
+    // Make an extra sanity check to insure new_sp is readable.
+    // Note: NextStackFrame<false>() is only called while the program
+    //       is already on its last leg, so it's ok to be slow here.
+    static int page_size = getpagesize();
+    void *new_sp_aligned = (void *)((uintptr_t)new_sp & ~(page_size - 1));
+    if (msync(new_sp_aligned, page_size, MS_ASYNC) == -1)
+      return NULL;
+  }
+#endif
+  return new_sp;
+}
+
+// If you change this function, also change GetStackFrames below.
+int GetStackTrace(void** result, int max_depth, int skip_count) {
+  void **sp;
+#ifdef __i386__
+  // Stack frame format:
+  //    sp[0]   pointer to previous frame
+  //    sp[1]   caller address
+  //    sp[2]   first argument
+  //    ...
+  sp = (void **)&result - 2;
+#endif
+
+#ifdef __x86_64__
+  // __builtin_frame_address(0) can return the wrong address on gcc-4.1.0-k8
+  unsigned long rbp;
+  // Move the value of the register %rbp into the local variable rbp.
+  // We need 'volatile' to prevent this instruction from getting moved
+  // around during optimization to before function prologue is done.
+  // An alternative way to achieve this
+  // would be (before this __asm__ instruction) to call Noop() defined as
+  //   static void Noop() __attribute__ ((noinline));  // prevent inlining
+  //   static void Noop() { asm(""); }  // prevent optimizing-away
+  __asm__ volatile ("mov %%rbp, %0" : "=r" (rbp));
+  // Arguments are passed in registers on x86-64, so we can't just
+  // offset from &result
+  sp = (void **) rbp;
+#endif
+
+  int n = 0;
+  while (sp && n < max_depth) {
+    if (*(sp+1) == (void *)0) {
+      // In 64-bit code, we often see a frame that
+      // points to itself and has a return address of 0.
+      break;
+    }
+    if (skip_count > 0) {
+      skip_count--;
+    } else {
+      result[n++] = *(sp+1);
+    }
+    // Use strict unwinding rules.
+    sp = NextStackFrame<true>(sp);
+  }
+  return n;
+}
+
+// If you change this function, also change GetStackTrace above:
+//
+// This GetStackFrames routine shares a lot of code with GetStackTrace
+// above. This code could have been refactored into a common routine,
+// and then both GetStackTrace/GetStackFrames could call that routine.
+// There are two problems with that:
+//
+// (1) The performance of the refactored-code suffers substantially - the
+//     refactored needs to be able to record the stack trace when called
+//     from GetStackTrace, and both the stack trace and stack frame sizes,
+//     when called from GetStackFrames - this introduces enough new
+//     conditionals that GetStackTrace performance can degrade by as much
+//     as 50%.
+//
+// (2) Whether the refactored routine gets inlined into GetStackTrace and
+//     GetStackFrames depends on the compiler, and we can't guarantee the
+//     behavior either-way, even with "__attribute__ ((always_inline))"
+//     or "__attribute__ ((noinline))". But we need this guarantee or the
+//     frame counts may be off by one.
+//
+// Both (1) and (2) can be addressed without this code duplication, by
+// clever use of template functions, and by defining GetStackTrace and
+// GetStackFrames as macros that expand to these template functions.
+// However, this approach comes with its own set of problems - namely,
+// macros and  preprocessor trouble - for example,  if GetStackTrace
+// and/or GetStackFrames is ever defined as a member functions in some
+// class, we are in trouble.
+int GetStackFrames(void** pcs, int* sizes, int max_depth, int skip_count) {
+  void **sp;
+#ifdef __i386__
+  // Stack frame format:
+  //    sp[0]   pointer to previous frame
+  //    sp[1]   caller address
+  //    sp[2]   first argument
+  //    ...
+  sp = (void **)&pcs - 2;
+#endif
+
+#ifdef __x86_64__
+  // __builtin_frame_address(0) can return the wrong address on gcc-4.1.0-k8
+  unsigned long rbp;
+  // Move the value of the register %rbp into the local variable rbp.
+  // We need 'volatile' to prevent this instruction from getting moved
+  // around during optimization to before function prologue is done.
+  // An alternative way to achieve this
+  // would be (before this __asm__ instruction) to call Noop() defined as
+  //   static void Noop() __attribute__ ((noinline));  // prevent inlining
+  //   static void Noop() { asm(""); }  // prevent optimizing-away
+  __asm__ volatile ("mov %%rbp, %0" : "=r" (rbp));
+  // Arguments are passed in registers on x86-64, so we can't just
+  // offset from &pcs
+  sp = (void **) rbp;
+#endif
+
+  int n = 0;
+  while (sp && n < max_depth) {
+    if (*(sp+1) == (void *)0) {
+      // In 64-bit code, we often see a frame that
+      // points to itself and has a return address of 0.
+      break;
+    }
+    // The GetStackFrames routine is called when we are in some
+    // informational context (the failure signal handler for example).
+    // Use the non-strict unwinding rules to produce a stack trace
+    // that is as complete as possible (even if it contains a few bogus
+    // entries in some rare cases).
+    void **next_sp = NextStackFrame<false>(sp);
+    if (skip_count > 0) {
+      skip_count--;
+    } else {
+      pcs[n] = *(sp+1);
+      if (next_sp > sp) {
+        sizes[n] = (uintptr_t)next_sp - (uintptr_t)sp;
+      } else {
+        // A frame-size of 0 is used to indicate unknown frame size.
+        sizes[n] = 0;
+      }
+      n++;
+    }
+    sp = next_sp;
+  }
+  return n;
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/stacktrace_x86_64-inl.h b/src/stacktrace_x86_64-inl.h
new file mode 100644
index 0000000..932b6c8
--- /dev/null
+++ b/src/stacktrace_x86_64-inl.h
@@ -0,0 +1,127 @@
+// Copyright 2005 - 2007 Google Inc.
+// All rights reserved.
+//
+// Author: Arun Sharma
+//
+// Produce stack trace using libgcc
+
+extern "C" {
+#include <stdlib.h> // for NULL
+#include <unwind.h> // ABI defined unwinder
+}
+#include "stacktrace.h"
+
+_START_GOOGLE_NAMESPACE_
+
+typedef struct {
+  void **result;
+  int max_depth;
+  int skip_count;
+  int count;
+} trace_arg_t;
+
+
+// Workaround for the malloc() in _Unwind_Backtrace() issue.
+static _Unwind_Reason_Code nop_backtrace(struct _Unwind_Context *uc, void *opq) {
+  return _URC_NO_REASON;
+}
+
+
+// This code is not considered ready to run until
+// static initializers run so that we are guaranteed
+// that any malloc-related initialization is done.
+static bool ready_to_run = false;
+class StackTraceInit {
+ public:
+   StackTraceInit() {
+     // Extra call to force initialization
+     _Unwind_Backtrace(nop_backtrace, NULL);
+     ready_to_run = true;
+   }
+};
+
+static StackTraceInit module_initializer;  // Force initialization
+
+static _Unwind_Reason_Code GetOneFrame(struct _Unwind_Context *uc, void *opq) {
+  trace_arg_t *targ = (trace_arg_t *) opq;
+
+  if (targ->skip_count > 0) {
+    targ->skip_count--;
+  } else {
+    targ->result[targ->count++] = (void *) _Unwind_GetIP(uc);
+  }
+
+  if (targ->count == targ->max_depth)
+    return _URC_END_OF_STACK;
+
+  return _URC_NO_REASON;
+}
+
+// If you change this function, also change GetStackFrames below.
+int GetStackTrace(void** result, int max_depth, int skip_count) {
+  if (!ready_to_run)
+    return 0;
+
+  trace_arg_t targ;
+
+  skip_count += 1;         // Do not include the "GetStackTrace" frame
+
+  targ.result = result;
+  targ.max_depth = max_depth;
+  targ.skip_count = skip_count;
+  targ.count = 0;
+
+  _Unwind_Backtrace(GetOneFrame, &targ);
+
+  return targ.count;
+}
+
+// If you change this function, also change GetStackTrace above:
+//
+// This GetStackFrames routine shares a lot of code with GetStackTrace
+// above. This code could have been refactored into a common routine,
+// and then both GetStackTrace/GetStackFrames could call that routine.
+// There are two problems with that:
+//
+// (1) The performance of the refactored-code suffers substantially - the
+//     refactored needs to be able to record the stack trace when called
+//     from GetStackTrace, and both the stack trace and stack frame sizes,
+//     when called from GetStackFrames - this introduces enough new
+//     conditionals that GetStackTrace performance can degrade by as much
+//     as 50%.
+//
+// (2) Whether the refactored routine gets inlined into GetStackTrace and
+//     GetStackFrames depends on the compiler, and we can't guarantee the
+//     behavior either-way, even with "__attribute__ ((always_inline))"
+//     or "__attribute__ ((noinline))". But we need this guarantee or the
+//     frame counts may be off by one.
+//
+// Both (1) and (2) can be addressed without this code duplication, by
+// clever use of template functions, and by defining GetStackTrace and
+// GetStackFrames as macros that expand to these template functions.
+// However, this approach comes with its own set of problems - namely,
+// macros and  preprocessor trouble - for example,  if GetStackTrace
+// and/or GetStackFrames is ever defined as a member functions in some
+// class, we are in trouble.
+int GetStackFrames(void** pcs, int* sizes, int max_depth, int skip_count) {
+  if (!ready_to_run)
+    return 0;
+
+  trace_arg_t targ;
+
+  skip_count += 1;         // Do not include the "GetStackFrames" frame
+
+  targ.result = pcs;
+  targ.max_depth = max_depth;
+  targ.skip_count = skip_count;
+  targ.count = 0;
+
+  _Unwind_Backtrace(GetOneFrame, &targ);
+
+  // No implementation for finding out the stack frame sizes yet.
+  memset(sizes, 0, sizeof(*sizes) * targ.count);
+
+  return targ.count;
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/stl_logging_unittest.cc b/src/stl_logging_unittest.cc
new file mode 100644
index 0000000..ed0b986
--- /dev/null
+++ b/src/stl_logging_unittest.cc
@@ -0,0 +1,164 @@
+// Copyright 2003 Google, Inc.
+// All Rights Reserved.
+
+#include "config.h"
+
+#ifdef HAVE_USING_OPERATOR
+
+#include "glog/stl_logging.h"
+
+#include <iostream>
+#include <map>
+#include <string>
+#include <strstream>
+#include <vector>
+
+#ifdef __GNUC__
+# include <ext/hash_map>
+# include <ext/hash_set>
+#endif
+
+#include "glog/logging.h"
+#include "googletest.h"
+
+using namespace std;
+#ifdef __GNUC__
+using namespace __gnu_cxx;
+#endif
+
+struct user_hash {
+  size_t operator()(int x) const { return x; }
+};
+
+void TestSTLLogging() {
+  {
+    // Test a sequence.
+    vector<int> v;
+    v.push_back(10);
+    v.push_back(20);
+    v.push_back(30);
+    char ss_buf[1000];
+    ostrstream ss(ss_buf, sizeof(ss_buf));
+    // Just ostrstream s1; leaks heap.
+    ss << v << ends;
+    CHECK_STREQ(ss.str(), "10 20 30");
+    vector<int> copied_v(v);
+    CHECK_EQ(v, copied_v);  // This must compile.
+  }
+
+  {
+    // Test a sorted pair associative container.
+    map< int, string > m;
+    m[20] = "twenty";
+    m[10] = "ten";
+    m[30] = "thirty";
+    char ss_buf[1000];
+    ostrstream ss(ss_buf, sizeof(ss_buf));
+    ss << m << ends;
+    CHECK_STREQ(ss.str(), "(10, ten) (20, twenty) (30, thirty)");
+    map< int, string > copied_m(m);
+    CHECK_EQ(m, copied_m);  // This must compile.
+  }
+
+#ifdef __GNUC__
+  {
+    // Test a hashed simple associative container.
+    hash_set<int> hs;
+    hs.insert(10);
+    hs.insert(20);
+    hs.insert(30);
+    char ss_buf[1000];
+    ostrstream ss(ss_buf, sizeof(ss_buf));
+    ss << hs << ends;
+    CHECK_STREQ(ss.str(), "10 20 30");
+    hash_set<int> copied_hs(hs);
+    CHECK_EQ(hs, copied_hs);  // This must compile.
+  }
+#endif
+
+#ifdef __GNUC__
+  {
+    // Test a hashed pair associative container.
+    hash_map<int, string> hm;
+    hm[10] = "ten";
+    hm[20] = "twenty";
+    hm[30] = "thirty";
+    char ss_buf[1000];
+    ostrstream ss(ss_buf, sizeof(ss_buf));
+    ss << hm << ends;
+    CHECK_STREQ(ss.str(), "(10, ten) (20, twenty) (30, thirty)");
+    hash_map<int, string> copied_hm(hm);
+    CHECK_EQ(hm, copied_hm);  // this must compile
+  }
+#endif
+
+  {
+    // Test a long sequence.
+    vector<int> v;
+    string expected;
+    for (int i = 0; i < 100; i++) {
+      v.push_back(i);
+      if (i > 0) expected += ' ';
+      char buf[256];
+      sprintf(buf, "%d", i);
+      expected += buf;
+    }
+    v.push_back(100);
+    expected += " ...";
+    char ss_buf[1000];
+    ostrstream ss(ss_buf, sizeof(ss_buf));
+    ss << v << ends;
+    CHECK_STREQ(ss.str(), expected.c_str());
+  }
+
+  {
+    // Test a sorted pair associative container.
+    // Use a non-default comparison functor.
+    map< int, string, greater<int> > m;
+    m[20] = "twenty";
+    m[10] = "ten";
+    m[30] = "thirty";
+    char ss_buf[1000];
+    ostrstream ss(ss_buf, sizeof(ss_buf));
+    ss << m << ends;
+    CHECK_STREQ(ss.str(), "(30, thirty) (20, twenty) (10, ten)");
+    map< int, string, greater<int> > copied_m(m);
+    CHECK_EQ(m, copied_m);  // This must compile.
+  }
+
+#ifdef __GNUC__
+  {
+    // Test a hashed simple associative container.
+    // Use a user defined hash function.
+    hash_set<int, user_hash> hs;
+    hs.insert(10);
+    hs.insert(20);
+    hs.insert(30);
+    char ss_buf[1000];
+    ostrstream ss(ss_buf, sizeof(ss_buf));
+    ss << hs << ends;
+    CHECK_STREQ(ss.str(), "10 20 30");
+    hash_set<int, user_hash> copied_hs(hs);
+    CHECK_EQ(hs, copied_hs);  // This must compile.
+  }
+#endif
+}
+
+int main(int argc, char** argv) {
+  TestSTLLogging();
+  std::cout << "PASS\n";
+  return 0;
+}
+
+#else
+
+#include <iostream>
+
+int main(int argc, char** argv) {
+  std::cout << "We don't support stl_logging for this compiler.\n"
+            << "(we need compiler support of 'using ::operator<<' "
+            << "for this feature.)\n";
+  return 0;
+}
+
+#endif  // HAVE_USING_OPERATOR
diff --git a/src/symbolize.cc b/src/symbolize.cc
new file mode 100644
index 0000000..30c6df4
--- /dev/null
+++ b/src/symbolize.cc
@@ -0,0 +1,613 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Satoru Takabayashi
+// Stack-footprint reduction work done by Raksit Ashok
+//
+// Implementation note:
+//
+// We don't use heaps but only use stacks.  We want to reduce the
+// stack consumption so that the symbolizer can run on small stacks.
+//
+// Here are some numbers collected with GCC 4.1.0 on x86:
+// - sizeof(Elf32_Sym)  = 16
+// - sizeof(Elf32_Shdr) = 40
+// - sizeof(Elf64_Sym)  = 24
+// - sizeof(Elf64_Shdr) = 64
+//
+// This implementation is intended to be async-signal-safe but uses
+// some functions which are not guaranteed to be so, such as memchr()
+// and memmove().  We assume they are async-signal-safe.
+//
+
+#if defined(__ELF__)  // defined by gcc on Linux
+
+#include <dlfcn.h>
+#include <elf.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <link.h>  // For ElfW() macro.
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "symbolize.h"
+#include "demangle.h"
+#include "config.h"
+#include "utilities.h"
+#include "glog/raw_logging.h"
+
+// Re-runs fn until it doesn't cause EINTR.
+#define NO_INTR(fn)   do {} while ((fn) < 0 && errno == EINTR)
+
+_START_GOOGLE_NAMESPACE_
+
+// We don't use assert() since it's not guaranteed to be
+// async-signal-safe.  Instead we define a minimal assertion
+// macro. So far, we don't need pretty printing for __FILE__, etc.
+
+// A wrapper for abort() to make it callable in ? :.
+static int AssertFail() {
+  abort();
+  return 0;  // Should not reach.
+}
+
+#define SAFE_ASSERT(expr) ((expr) ? 0 : AssertFail())
+
+// Read up to "count" bytes from file descriptor "fd" into the buffer
+// starting at "buf" while handling short reads and EINTR.  On
+// success, return the number of bytes read.  Otherwise, return -1.
+static ssize_t ReadPersistent(const int fd, void *buf, const size_t count) {
+  SAFE_ASSERT(fd >= 0);
+  SAFE_ASSERT(count >= 0 && count <= SSIZE_MAX);
+  char *buf0 = reinterpret_cast<char *>(buf);
+  ssize_t num_bytes = 0;
+  while (num_bytes < count) {
+    ssize_t len;
+    NO_INTR(len = read(fd, buf0 + num_bytes, count - num_bytes));
+    if (len < 0) {  // There was an error other than EINTR.
+      return -1;
+    }
+    if (len == 0) {  // Reached EOF.
+      break;
+    }
+    num_bytes += len;
+  }
+  SAFE_ASSERT(num_bytes <= count);
+  return num_bytes;
+}
+
+// Read up to "count" bytes from "offset" in the file pointed by file
+// descriptor "fd" into the buffer starting at "buf".  On success,
+// return the number of bytes read.  Otherwise, return -1.
+static ssize_t ReadFromOffset(const int fd, void *buf,
+                              const size_t count, const off_t offset) {
+  off_t off = lseek(fd, offset, SEEK_SET);
+  if (off == (off_t)-1) {
+    return -1;
+  }
+  return ReadPersistent(fd, buf, count);
+}
+
+// Try reading exactly "count" bytes from "offset" bytes in a file
+// pointed by "fd" into the buffer starting at "buf" while handling
+// short reads and EINTR.  On success, return true. Otherwise, return
+// false.
+static bool ReadFromOffsetExact(const int fd, void *buf,
+                                const size_t count, const off_t offset) {
+  ssize_t len = ReadFromOffset(fd, buf, count, offset);
+  return len == count;
+}
+
+// Returns elf_header.e_type if the file pointed by fd is an ELF binary.
+static int FileGetElfType(const int fd) {
+  ElfW(Ehdr) elf_header;
+  if (!ReadFromOffsetExact(fd, &elf_header, sizeof(elf_header), 0)) {
+    return -1;
+  }
+  if (memcmp(elf_header.e_ident, ELFMAG, SELFMAG) != 0) {
+    return -1;
+  }
+  return elf_header.e_type;
+}
+
+// Read the section headers in the given ELF binary, and if a section
+// of the specified type is found, set the output to this section header
+// and return true.  Otherwise, return false.
+// To keep stack consumption low, we would like this function to not get
+// inlined.
+static ATTRIBUTE_NOINLINE bool
+GetSectionHeaderByType(const int fd, ElfW(Half) sh_num, const off_t sh_offset,
+                       ElfW(Word) type, ElfW(Shdr) *out) {
+  // Read at most 16 section headers at a time to save read calls.
+  ElfW(Shdr) buf[16];
+  for (int i = 0; i < sh_num;) {
+    const ssize_t num_bytes_left = (sh_num - i) * sizeof(buf[0]);
+    const ssize_t num_bytes_to_read =
+        (sizeof(buf) > num_bytes_left) ? num_bytes_left : sizeof(buf);
+    const ssize_t len = ReadFromOffset(fd, buf, num_bytes_to_read,
+                                       sh_offset + i * sizeof(buf[0]));
+    SAFE_ASSERT(len % sizeof(buf[0]) == 0);
+    const ssize_t num_headers_in_buf = len / sizeof(buf[0]);
+    SAFE_ASSERT(num_headers_in_buf <= sizeof(buf) / sizeof(buf[0]));
+    for (int j = 0; j < num_headers_in_buf; ++j) {
+      if (buf[j].sh_type == type) {
+        *out = buf[j];
+        return true;
+      }
+    }
+    i += num_headers_in_buf;
+  }
+  return false;
+}
+
+// There is no particular reason to limit section name to 63 characters,
+// but there has (as yet) been no need for anything longer either.
+const int kMaxSectionNameLen = 64;
+
+// name_len should include terminating '\0'.
+bool GetSectionHeaderByName(int fd, const char *name, size_t name_len,
+                            ElfW(Shdr) *out) {
+  ElfW(Ehdr) elf_header;
+  if (!ReadFromOffsetExact(fd, &elf_header, sizeof(elf_header), 0)) {
+    return false;
+  }
+
+  ElfW(Shdr) shstrtab;
+  off_t shstrtab_offset = (elf_header.e_shoff +
+                           elf_header.e_shentsize * elf_header.e_shstrndx);
+  if (!ReadFromOffsetExact(fd, &shstrtab, sizeof(shstrtab), shstrtab_offset)) {
+    return false;
+  }
+
+  for (int i = 0; i < elf_header.e_shnum; ++i) {
+    off_t section_header_offset = (elf_header.e_shoff +
+                                   elf_header.e_shentsize * i);
+    if (!ReadFromOffsetExact(fd, out, sizeof(*out), section_header_offset)) {
+      return false;
+    }
+    char header_name[kMaxSectionNameLen];
+    if (sizeof(header_name) < name_len) {
+      RAW_LOG(WARNING, "Section name '%s' is too long (%"PRIuS"); "
+              "section will not be found (even if present).", name, name_len);
+      // No point in even trying.
+      return false;
+    }
+    off_t name_offset = shstrtab.sh_offset + out->sh_name;
+    ssize_t n_read = ReadFromOffset(fd, &header_name, name_len, name_offset);
+    if (n_read == -1) {
+      return false;
+    } else if (n_read != name_len) {
+      // Short read -- name could be at end of file.
+      continue;
+    }
+    if (memcmp(header_name, name, name_len) == 0) {
+      return true;
+    }
+  }
+  return false;
+}
+
+// Read a symbol table and look for the symbol containing the
+// pc. Iterate over symbols in a symbol table and look for the symbol
+// containing "pc".  On success, return true and write the symbol name
+// to out.  Otherwise, return false.
+// To keep stack consumption low, we would like this function to not get
+// inlined.
+static ATTRIBUTE_NOINLINE bool
+FindSymbol(uint64_t pc, const int fd, char *out, int out_size,
+           uint64_t symbol_offset, const ElfW(Shdr) *strtab,
+           const ElfW(Shdr) *symtab) {
+  if (symtab == NULL) {
+    return false;
+  }
+  const int num_symbols = symtab->sh_size / symtab->sh_entsize;
+  for (int i = 0; i < num_symbols;) {
+    off_t offset = symtab->sh_offset + i * symtab->sh_entsize;
+
+    // If we are reading Elf64_Sym's, we want to limit this array to
+    // 32 elements (to keep stack consumption low), otherwise we can
+    // have a 64 element Elf32_Sym array.
+#if __WORDSIZE == 64
+#define NUM_SYMBOLS 32
+#else
+#define NUM_SYMBOLS 64
+#endif
+
+    // Read at most NUM_SYMBOLS symbols at once to save read() calls.
+    ElfW(Sym) buf[NUM_SYMBOLS];
+    const ssize_t len = ReadFromOffset(fd, &buf, sizeof(buf), offset);
+    SAFE_ASSERT(len % sizeof(buf[0]) == 0);
+    const ssize_t num_symbols_in_buf = len / sizeof(buf[0]);
+    SAFE_ASSERT(num_symbols_in_buf <= sizeof(buf)/sizeof(buf[0]));
+    for (int j = 0; j < num_symbols_in_buf; ++j) {
+      const ElfW(Sym)& symbol = buf[j];
+      uint64_t start_address = symbol.st_value;
+      start_address += symbol_offset;
+      uint64_t end_address = start_address + symbol.st_size;
+      if (symbol.st_value != 0 &&  // Skip null value symbols.
+          symbol.st_shndx != 0 &&  // Skip undefined symbols.
+          start_address <= pc && pc < end_address) {
+        ssize_t len1 = ReadFromOffset(fd, out, out_size,
+                                      strtab->sh_offset + symbol.st_name);
+        if (len1 <= 0 || memchr(out, '\0', out_size) == NULL) {
+          return false;
+        }
+        return true;  // Obtained the symbol name.
+      }
+    }
+    i += num_symbols_in_buf;
+  }
+  return false;
+}
+
+// Get the symbol name of "pc" from the file pointed by "fd".  Process
+// both regular and dynamic symbol tables if necessary.  On success,
+// write the symbol name to "out" and return true.  Otherwise, return
+// false.
+static bool GetSymbolFromObjectFile(const int fd, uint64_t pc,
+                                    char *out, int out_size,
+                                    uint64_t map_start_address) {
+  // Read the ELF header.
+  ElfW(Ehdr) elf_header;
+  if (!ReadFromOffsetExact(fd, &elf_header, sizeof(elf_header), 0)) {
+    return false;
+  }
+
+  uint64_t symbol_offset = 0;
+  if (elf_header.e_type == ET_DYN) {  // DSO needs offset adjustment.
+    symbol_offset = map_start_address;
+  }
+
+  ElfW(Shdr) symtab, strtab;
+
+  // Consult a regular symbol table first.
+  if (!GetSectionHeaderByType(fd, elf_header.e_shnum, elf_header.e_shoff,
+                              SHT_SYMTAB, &symtab)) {
+    return false;
+  }
+  if (!ReadFromOffsetExact(fd, &strtab, sizeof(strtab), elf_header.e_shoff +
+                           symtab.sh_link * sizeof(symtab))) {
+    return false;
+  }
+  if (FindSymbol(pc, fd, out, out_size, symbol_offset,
+                 &strtab, &symtab)) {
+    return true;  // Found the symbol in a regular symbol table.
+  }
+
+  // If the symbol is not found, then consult a dynamic symbol table.
+  if (!GetSectionHeaderByType(fd, elf_header.e_shnum, elf_header.e_shoff,
+                              SHT_DYNSYM, &symtab)) {
+    return false;
+  }
+  if (!ReadFromOffsetExact(fd, &strtab, sizeof(strtab), elf_header.e_shoff +
+                           symtab.sh_link * sizeof(symtab))) {
+    return false;
+  }
+  if (FindSymbol(pc, fd, out, out_size, symbol_offset,
+                 &strtab, &symtab)) {
+    return true;  // Found the symbol in a dynamic symbol table.
+  }
+
+  return false;
+}
+
+namespace {
+// Thin wrapper around a file descriptor so that the file descriptor
+// gets closed for sure.
+struct FileDescriptor {
+  const int fd_;
+  explicit FileDescriptor(int fd) : fd_(fd) {}
+  ~FileDescriptor() {
+    if (fd_ >= 0) {
+      NO_INTR(close(fd_));
+    }
+  }
+  int get() { return fd_; }
+
+ private:
+  explicit FileDescriptor(const FileDescriptor&);
+  void operator=(const FileDescriptor&);
+};
+
+// Helper class for reading lines from file.
+//
+// Note: we don't use ProcMapsIterator since the object is big (it has
+// a 5k array member) and uses async-unsafe functions such as sscanf()
+// and snprintf().
+class LineReader {
+ public:
+  explicit LineReader(int fd, char *buf, int buf_len) : fd_(fd),
+    buf_(buf), buf_len_(buf_len), bol_(buf), eol_(buf), eod_(buf) {
+  }
+
+  // Read '\n'-terminated line from file.  On success, modify "bol"
+  // and "eol", then return true.  Otherwise, return false.
+  //
+  // Note: if the last line doesn't end with '\n', the line will be
+  // dropped.  It's an intentional behavior to make the code simple.
+  bool ReadLine(const char **bol, const char **eol) {
+    if (BufferIsEmpty()) {  // First time.
+      const ssize_t num_bytes = ReadPersistent(fd_, buf_, buf_len_);
+      if (num_bytes <= 0) {  // EOF or error.
+        return false;
+      }
+      eod_ = buf_ + num_bytes;
+      bol_ = buf_;
+    } else {
+      bol_ = eol_ + 1;  // Advance to the next line in the buffer.
+      SAFE_ASSERT(bol_ <= eod_);  // "bol_" can point to "eod_".
+      if (!HasCompleteLine()) {
+        const int incomplete_line_length = eod_ - bol_;
+        // Move the trailing incomplete line to the beginning.
+        memmove(buf_, bol_, incomplete_line_length);
+        // Read text from file and append it.
+        char * const append_pos = buf_ + incomplete_line_length;
+        const int capacity_left = buf_len_ - incomplete_line_length;
+        const ssize_t num_bytes = ReadPersistent(fd_, append_pos,
+                                                 capacity_left);
+        if (num_bytes <= 0) {  // EOF or error.
+          return false;
+        }
+        eod_ = append_pos + num_bytes;
+        bol_ = buf_;
+      }
+    }
+    eol_ = FindLineFeed();
+    if (eol_ == NULL) {  // '\n' not found.  Malformed line.
+      return false;
+    }
+    *eol_ = '\0';  // Replace '\n' with '\0'.
+
+    *bol = bol_;
+    *eol = eol_;
+    return true;
+  }
+
+  // Beginning of line.
+  const char *bol() {
+    return bol_;
+  }
+
+  // End of line.
+  const char *eol() {
+    return eol_;
+  }
+
+ private:
+  explicit LineReader(const LineReader&);
+  void operator=(const LineReader&);
+
+  char *FindLineFeed() {
+    return reinterpret_cast<char *>
+      (memchr(reinterpret_cast<const void *>(bol_), '\n', eod_ - bol_));
+  }
+
+  bool BufferIsEmpty() {
+    return buf_ == eod_;
+  }
+
+  bool HasCompleteLine() {
+    return !BufferIsEmpty() && FindLineFeed() != NULL;
+  }
+
+  const int fd_;
+  char * const buf_;
+  const int buf_len_;
+  const char *bol_;
+  char *eol_;
+  const char *eod_;  // End of data in "buf_".
+};
+}  // namespace
+
+// Place the hex number read from "start" into "*hex".  The pointer to
+// the first non-hex character or "end" is returned.
+static char *GetHex(const char *start, const char *end, uint64_t *hex) {
+  *hex = 0;
+  const char *p;
+  for (p = start; p < end; ++p) {
+    int ch = *p;
+    if ((ch >= '0' && ch <= '9') ||
+        (ch >= 'A' && ch <= 'F') || (ch >= 'a' && ch <= 'f')) {
+      *hex = (*hex << 4) | (ch < 'A' ? ch - '0' : (ch & 0xF) + 9);
+    } else {  // Encountered the first non-hex character.
+      break;
+    }
+  }
+  SAFE_ASSERT(p <= end);
+  return const_cast<char *>(p);
+}
+
+// Search for the object file (from /proc/self/maps) that contains
+// the specified pc. If found, open this file and return the file handle,
+// and also set start_address to the start address of where this object
+// file is mapped to in memory. Otherwise, return -1.
+static ATTRIBUTE_NOINLINE int
+OpenObjectFileContainingPcAndGetStartAddress(uint64_t pc,
+                                             uint64_t &start_address) {
+  int object_fd;
+
+  // Open /proc/self/maps.
+  int maps_fd;
+  NO_INTR(maps_fd = open("/proc/self/maps", O_RDONLY));
+  FileDescriptor wrapped_maps_fd(maps_fd);
+  if (wrapped_maps_fd.get() < 0) {
+    return -1;
+  }
+
+  // Iterate over maps and look for the map containing the pc.  Then
+  // look into the symbol tables inside.
+  char buf[1024];  // Big enough for line of sane /proc/self/maps
+  LineReader reader(wrapped_maps_fd.get(), buf, sizeof(buf));
+  while (true) {
+    const char *cursor;
+    const char *eol;
+    if (!reader.ReadLine(&cursor, &eol)) {  // EOF or malformed line.
+      return -1;
+    }
+
+    // Start parsing line in /proc/self/maps.  Here is an example:
+    //
+    // 08048000-0804c000 r-xp 00000000 08:01 2142121    /bin/cat
+    //
+    // We want start address (08048000), end address (0804c000), flags
+    // (r-xp) and file name (/bin/cat).
+
+    // Read start address.
+    cursor = GetHex(cursor, eol, &start_address);
+    if (cursor == eol || *cursor != '-') {
+      return -1;  // Malformed line.
+    }
+    ++cursor;  // Skip '-'.
+
+    // Read end address.
+    uint64_t end_address;
+    cursor = GetHex(cursor, eol, &end_address);
+    if (cursor == eol || *cursor != ' ') {
+      return -1;  // Malformed line.
+    }
+    ++cursor;  // Skip ' '.
+
+    // Check start and end addresses.
+    if (!(start_address <= pc && pc < end_address)) {
+      continue;  // We skip this map.  PC isn't in this map.
+    }
+
+    // Read flags.  Skip flags until we encounter a space or eol.
+    const char * const flags_start = cursor;
+    while (cursor < eol && *cursor != ' ') {
+      ++cursor;
+    }
+    // We expect at least four letters for flags (ex. "r-xp").
+    if (cursor == eol || cursor < flags_start + 4) {
+      return -1;  // Malformed line.
+    }
+
+    // Check flags.  We are only interested in "r-x" maps.
+    if (memcmp(flags_start, "r-x", 3) != 0) {  // Not a "r-x" map.
+      continue;  // We skip this map.
+    }
+    ++cursor;  // Skip ' '.
+
+    // Skip to file name.  "cursor" now points to file offset.  We need to
+    // skip at least three spaces for file offset, dev, and inode.
+    int num_spaces = 0;
+    while (cursor < eol) {
+      if (*cursor == ' ') {
+        ++num_spaces;
+      } else if (num_spaces >= 3) {
+        // The first non-space character after  skipping three spaces
+        // is the beginning of the file name.
+        break;
+      }
+      ++cursor;
+    }
+    if (cursor == eol) {
+      return -1;  // Malformed line.
+    }
+
+    // Finally, "cursor" now points to file name of our interest.
+    NO_INTR(object_fd = open(cursor, O_RDONLY));
+    if (object_fd < 0) {
+      return -1;
+    }
+    return object_fd;
+  }
+}
+
+
+SymbolizeCallback g_symbolize_callback = NULL;
+void InstallSymbolizeCallback(SymbolizeCallback callback) {
+  g_symbolize_callback = callback;
+}
+
+// This function wraps the Demangle function to provide an interface
+// where the input symbol is demangled in-place.
+// To keep stack consumption low, we would like this function to not
+// get inlined.
+static ATTRIBUTE_NOINLINE void DemangleInplace(char *out, int out_size) {
+  char demangled[256];  // Big enough for sane demangled symbols.
+  if (Demangle(out, demangled, sizeof(demangled))) {
+    // Demangling succeeded. Copy to out if the space allows.
+    int len = strlen(demangled);
+    if (len + 1 <= out_size) {  // +1 for '\0'.
+      SAFE_ASSERT(len < sizeof(demangled));
+      memmove(out, demangled, len + 1);
+    }
+  }
+}
+
+// The implementation of our symbolization routine.  If it
+// successfully finds the symbol containing "pc" and obtains the
+// symbol name, returns true and write the symbol name to "out".
+// Otherwise, returns false. If Callback function is installed via
+// InstallSymbolizeCallback(), the function is also called in this function,
+// and "out" is used as its output.
+// To keep stack consumption low, we would like this function to not
+// get inlined.
+static ATTRIBUTE_NOINLINE bool SymbolizeAndDemangle(void *pc, char *out,
+                                                    int out_size) {
+  uint64_t pc0 = reinterpret_cast<uintptr_t>(pc);
+  uint64_t start_address = 0;
+
+  int object_fd = OpenObjectFileContainingPcAndGetStartAddress(pc0,
+                                                               start_address);
+  if (object_fd == -1) {
+    return false;
+  }
+  FileDescriptor wrapped_object_fd(object_fd);
+  int elf_type = FileGetElfType(wrapped_object_fd.get());
+  if (elf_type == -1) {
+    return false;
+  }
+  if (g_symbolize_callback) {
+    // Run the call back if it's installed.
+    // Note: relocation (and much of the rest of this code) will be
+    // wrong for prelinked shared libraries and PIE executables.
+    uint64 relocation = (elf_type == ET_DYN) ? start_address : 0;
+    int num_bytes_written = g_symbolize_callback(wrapped_object_fd.get(),
+                                                 pc, out, out_size,
+                                                 relocation);
+    if (num_bytes_written > 0) {
+      out += num_bytes_written;
+      out_size -= num_bytes_written;
+    }
+  }
+  if (!GetSymbolFromObjectFile(wrapped_object_fd.get(), pc0,
+                               out, out_size, start_address)) {
+    return false;
+  }
+  // Symbolization succeeded.  Now we try to demangle the symbol.
+  DemangleInplace(out, out_size);
+  return true;
+}
+
+bool Symbolize(void *pc, char *out, int out_size) {
+  SAFE_ASSERT(out_size >= 0);
+  return SymbolizeAndDemangle(pc, out, out_size);
+}
+
+_END_GOOGLE_NAMESPACE_
+
+#else  /* __ELF__ */
+
+#include <assert.h>
+
+#include "config.h"
+
+_START_GOOGLE_NAMESPACE_
+
+// TODO: osx-port-incomplete.  An alternative is Brakepad, but I don't
+// think we want that mixed up in google3.
+bool Symbolize(void *pc, char *out, int out_size) {
+  assert(0);
+  return false;
+}
+
+_END_GOOGLE_NAMESPACE_
+
+#endif
diff --git a/src/symbolize.h b/src/symbolize.h
new file mode 100644
index 0000000..94c9fd8
--- /dev/null
+++ b/src/symbolize.h
@@ -0,0 +1,79 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Satoru Takabayashi
+//
+// This library provides Symbolize() function that symbolizes program
+// counters to their corresponding symbol names on linux platforms.
+// This library has a minimal implementation of an ELF symbol table
+// reader (i.e. it doesn't depend on libelf, etc.).
+//
+// The algorithm used in Symbolize() is as follows.
+//
+//   1. Go through a list of maps in /proc/self/maps and find the map
+//   containing the program counter.
+//
+//   2. Open the mapped file and find a regular symbol table inside.
+//   Iterate over symbols in the symbol table and look for the symbol
+//   containing the program counter.  If such a symbol is found,
+//   obtain the symbol name, and demangle the symbol if possible.
+//   If the symbol isn't found in the regular symbol table (binary is
+//   stripped), try the same thing with a dynamic symbol table.
+//
+// Note that Symbolize() is originally implemented to be used in
+// FailureSignalHandler() in base/google.cc.  Hence it doesn't use
+// malloc() and other unsafe operations.  It should be both
+// thread-safe and async-signal-safe.
+
+#ifndef BASE_SYMBOLIZE_H_
+#define BASE_SYMBOLIZE_H_
+
+#include "config.h"
+#include "glog/logging.h"
+
+#if defined(__ELF__)  // defined by gcc on Linux
+#include <elf.h>
+#include <link.h>  // For ElfW() macro.
+
+// If there is no ElfW macro, let's define it by ourself.
+#ifndef ElfW
+# if SIZEOF_VOID_P == 4
+#  define ElfW(type) Elf32_##type
+# elif SIZEOF_VOID_P == 8
+#  define ElfW(type) Elf64_##type
+# else
+#  error "Unknown sizeof(void *)"
+# endif
+#endif
+
+_START_GOOGLE_NAMESPACE_
+
+// Installs a callback function, which will be called right before a symbol name
+// is printed. The callback is intended to be used for showing a file name and a
+// line number preceding a symbol name.
+// "fd" is a file descriptor of the object file containing the program
+// counter "pc". The callback function should write output to "out"
+// and return the size of the output written. On error, the callback
+// function should return -1.
+typedef int (*SymbolizeCallback)(int fd, void *pc, char *out, size_t out_size,
+                                 uint64 relocation);
+void InstallSymbolizeCallback(SymbolizeCallback callback);
+
+// Gets the section header for the given name, if it exists. Returns true on
+// success. Otherwise, returns false.
+bool GetSectionHeaderByName(int fd, const char *name, size_t name_len,
+                            ElfW(Shdr) *out);
+
+_END_GOOGLE_NAMESPACE_
+
+#endif  /* __ELF__ */
+
+_START_GOOGLE_NAMESPACE_
+
+// Symbolizes a program counter.  On success, returns true and write the
+// symbol name to "out".  The symbol name is demangled if possible
+// (supports symbols generated by GCC 3.x or newer).  Otherwise,
+// returns false.
+bool Symbolize(void *pc, char *out, int out_size);
+
+_END_GOOGLE_NAMESPACE_
+
+#endif  // BASE_SYMBOLIZE_H_
diff --git a/src/symbolize_unittest.cc b/src/symbolize_unittest.cc
new file mode 100644
index 0000000..2405362
--- /dev/null
+++ b/src/symbolize_unittest.cc
@@ -0,0 +1,328 @@
+// Copyright 2006 Google Inc. All Rights Reserved.
+// Author: Satoru Takabayashi
+//
+// Unit tests for functions in symbolize.cc.
+
+#include <signal.h>
+#include <iostream>
+
+#include "glog/logging.h"
+#include "symbolize.h"
+#include "googletest.h"
+#include "config.h"
+#include "utilities.h"
+
+using namespace std;
+using namespace GOOGLE_NAMESPACE;
+
+#if defined(HAVE_STACKTRACE) && defined(__ELF__)
+
+#define always_inline
+
+// This unit tests make sense only with GCC.
+// Uses lots of GCC specific features.
+#if defined(__GNUC__) && !defined(__OPENCC__)
+#  if __GNUC__ >= 4
+#    define TEST_WITH_MODERN_GCC
+#    if __i386__  // always_inline isn't supported for x86_64 with GCC 4.1.0.
+#      undef always_inline
+#      define always_inline __attribute__((always_inline))
+#      define HAVE_ALWAYS_INLINE
+#    endif  // __i386__
+#  else
+#  endif  // __GNUC__ >= 4
+#  if defined(__i386__) || defined(__x86_64__)
+#    define TEST_X86_32_AND_64 1
+#  endif  // defined(__i386__) || defined(__x86_64__)
+#endif
+
+// A wrapper function for Symbolize() to make the unit test simple.
+static const char *TrySymbolize(void *pc) {
+  static char symbol[4096];
+  if (Symbolize(pc, symbol, sizeof(symbol))) {
+    return symbol;
+  } else {
+    return NULL;
+  }
+}
+
+// Make them C linkage to avoid mangled names.
+extern "C" {
+void nonstatic_func() {
+  volatile int a = 0;
+  ++a;
+}
+
+static void static_func() {
+  volatile int a = 0;
+  ++a;
+}
+}
+
+TEST(Symbolize, Symbolize) {
+  // We do C-style cast since GCC 2.95.3 doesn't allow
+  // reinterpret_cast<void *>(&func).
+
+  // Compilers should give us pointers to them.
+  EXPECT_STREQ("nonstatic_func", TrySymbolize((void *)(&nonstatic_func)));
+  EXPECT_STREQ("static_func", TrySymbolize((void *)(&static_func)));
+
+  EXPECT_TRUE(NULL == TrySymbolize(NULL));
+}
+
+struct Foo {
+  static void func(int x);
+};
+
+void ATTRIBUTE_NOINLINE Foo::func(int x) {
+  volatile int a = x;
+  ++a;
+}
+
+// With a modern GCC, Symbolize() should return demangled symbol
+// names.  Function parameters should be omitted.
+#ifdef TEST_WITH_MODERN_GCC
+TEST(Symbolize, SymbolizeWithDemangling) {
+  Foo::func(100);
+  EXPECT_STREQ("Foo::func()", TrySymbolize((void *)(&Foo::func)));
+}
+#endif
+
+// Tests that verify that Symbolize footprint is within some limit.
+
+// To measure the stack footprint of the Symbolize function, we create
+// a signal handler (for SIGUSR1 say) that calls the Symbolize function
+// on an alternate stack. This alternate stack is initialized to some
+// known pattern (0x55, 0x55, 0x55, ...). We then self-send this signal,
+// and after the signal handler returns, look at the alternate stack
+// buffer to see what portion has been touched.
+//
+// This trick gives us the the stack footprint of the signal handler.
+// But the signal handler, even before the call to Symbolize, consumes
+// some stack already. We however only want the stack usage of the
+// Symbolize function. To measure this accurately, we install two signal
+// handlers: one that does nothing and just returns, and another that
+// calls Symbolize. The difference between the stack consumption of these
+// two signals handlers should give us the Symbolize stack foorprint.
+
+static void *g_pc_to_symbolize;
+static char g_symbolize_buffer[4096];
+static char *g_symbolize_result;
+
+static void EmptySignalHandler(int signo) {}
+
+static void SymbolizeSignalHandler(int signo) {
+  if (Symbolize(g_pc_to_symbolize, g_symbolize_buffer,
+                sizeof(g_symbolize_buffer))) {
+    g_symbolize_result = g_symbolize_buffer;
+  } else {
+    g_symbolize_result = NULL;
+  }
+}
+
+const int kAlternateStackSize = 8096;
+const char kAlternateStackFillValue = 0x55;
+
+// These helper functions look at the alternate stack buffer, and figure
+// out what portion of this buffer has been touched - this is the stack
+// consumption of the signal handler running on this alternate stack.
+static bool StackGrowsDown(int *x) {
+  int y;
+  return &y < x;
+}
+static int GetStackConsumption(const char* alt_stack) {
+  int x;
+  if (StackGrowsDown(&x)) {
+    for (int i = 0; i < kAlternateStackSize; i++) {
+      if (alt_stack[i] != kAlternateStackFillValue) {
+        return (kAlternateStackSize - i);
+      }
+    }
+  } else {
+    for (int i = (kAlternateStackSize - 1); i >= 0; i--) {
+      if (alt_stack[i] != kAlternateStackFillValue) {
+        return i;
+      }
+    }
+  }
+  return -1;
+}
+
+#ifdef HAVE_SIGALTSTACK
+
+// Call Symbolize and figure out the stack footprint of this call.
+static const char *SymbolizeStackConsumption(void *pc, int *stack_consumed) {
+
+  g_pc_to_symbolize = pc;
+
+  // The alt-signal-stack cannot be heap allocated because there is a
+  // bug in glibc-2.2 where some signal handler setup code looks at the
+  // current stack pointer to figure out what thread is currently running.
+  // Therefore, the alternate stack must be allocated from the main stack
+  // itself.
+  char altstack[kAlternateStackSize];
+  memset(altstack, kAlternateStackFillValue, kAlternateStackSize);
+
+  // Set up the alt-signal-stack (and save the older one).
+  stack_t sigstk = {};  // Zero-clear.
+  stack_t old_sigstk;
+  sigstk.ss_sp = altstack;
+  sigstk.ss_size = kAlternateStackSize;
+  sigstk.ss_flags = 0;
+  CHECK_ERR(sigaltstack(&sigstk, &old_sigstk));
+
+  // Set up SIGUSR1 and SIGUSR2 signal handlers (and save the older ones).
+  struct sigaction sa = {};  // Zero-clear;
+  struct sigaction old_sa1, old_sa2;
+  sigemptyset(&sa.sa_mask);
+  sa.sa_flags = SA_ONSTACK;
+
+  // SIGUSR1 maps to EmptySignalHandler.
+  sa.sa_handler = EmptySignalHandler;
+  CHECK_ERR(sigaction(SIGUSR1, &sa, &old_sa1));
+
+  // SIGUSR2 maps to SymbolizeSignalHanlder.
+  sa.sa_handler = SymbolizeSignalHandler;
+  CHECK_ERR(sigaction(SIGUSR2, &sa, &old_sa2));
+
+  // Send SIGUSR1 signal and measure the stack consumption of the empty
+  // signal handler.
+  CHECK_ERR(kill(getpid(), SIGUSR1));
+  int stack_consumption1 = GetStackConsumption(altstack);
+
+  // Send SIGUSR2 signal and measure the stack consumption of the symbolize
+  // signal handler.
+  CHECK_ERR(kill(getpid(), SIGUSR2));
+  int stack_consumption2 = GetStackConsumption(altstack);
+
+  // The difference between the two stack consumption values is the
+  // stack footprint of the Symbolize function.
+  if (stack_consumption1 != -1 && stack_consumption2 != -1) {
+    *stack_consumed = stack_consumption2 - stack_consumption1;
+  } else {
+    *stack_consumed = -1;
+  }
+
+  // Log the stack consumption values.
+  LOG(INFO) << "Stack consumption of empty signal handler: "
+            << stack_consumption1;
+  LOG(INFO) << "Stack consumption of symbolize signal handler: "
+            << stack_consumption2;
+  LOG(INFO) << "Stack consumption of Symbolize: " << *stack_consumed;
+
+  // Now restore the old alt-signal-stack and signal handlers.
+  CHECK_ERR(sigaltstack(&old_sigstk, NULL));
+  CHECK_ERR(sigaction(SIGUSR1, &old_sa1, NULL));
+  CHECK_ERR(sigaction(SIGUSR2, &old_sa2, NULL));
+
+  return g_symbolize_result;
+}
+
+// Symbolize stack consumption should be within 2kB.
+const int kStackConsumptionUpperLimit = 2048;
+
+TEST(Symbolize, SymbolizeStackConsumption) {
+  int stack_consumed;
+  const char* symbol;
+
+  symbol = SymbolizeStackConsumption((void *)(&nonstatic_func),
+                                     &stack_consumed);
+  EXPECT_STREQ("nonstatic_func", symbol);
+  EXPECT_GT(stack_consumed, 0);
+  EXPECT_LT(stack_consumed, kStackConsumptionUpperLimit);
+
+  symbol = SymbolizeStackConsumption((void *)(&static_func),
+                                     &stack_consumed);
+  EXPECT_STREQ("static_func", symbol);
+  EXPECT_GT(stack_consumed, 0);
+  EXPECT_LT(stack_consumed, kStackConsumptionUpperLimit);
+}
+
+#ifdef TEST_WITH_MODERN_GCC
+TEST(Symbolize, SymbolizeWithDemanglingStackConsumption) {
+  Foo::func(100);
+  int stack_consumed;
+  const char* symbol;
+
+  symbol = SymbolizeStackConsumption((void *)(&Foo::func), &stack_consumed);
+
+  EXPECT_STREQ("Foo::func()", symbol);
+  EXPECT_GT(stack_consumed, 0);
+  EXPECT_LT(stack_consumed, kStackConsumptionUpperLimit);
+}
+#endif
+
+#endif  // HAVE_SIGALTSTACK
+
+// x86 specific tests.  Uses some inline assembler.
+extern "C" {
+inline void* always_inline inline_func() {
+  register void *pc = NULL;
+#ifdef TEST_X86_32_AND_64
+  __asm__ __volatile__("call 1f; 1: pop %0" : "=r"(pc));
+#endif
+  return pc;
+}
+
+void* ATTRIBUTE_NOINLINE non_inline_func() {
+  register void *pc = NULL;
+#ifdef TEST_X86_32_AND_64
+  __asm__ __volatile__("call 1f; 1: pop %0" : "=r"(pc));
+#endif
+  return pc;
+}
+
+void ATTRIBUTE_NOINLINE TestWithPCInsideNonInlineFunction() {
+#if defined(TEST_X86_32_AND_64) && defined(HAVE_ATTRIBUTE_NOINLINE)
+  void *pc = non_inline_func();
+  const char *symbol = TrySymbolize(pc);
+  CHECK(symbol != NULL);
+  CHECK_EQ(0, strcmp(symbol, "non_inline_func"));
+  cout << "Test case TestWithPCInsideNonInlineFunction passed." << endl;
+#endif
+}
+
+void ATTRIBUTE_NOINLINE TestWithPCInsideInlineFunction() {
+#if defined(TEST_X86_32_AND_64) && defined(HAVE_ALWAYS_INLINE)
+  void *pc = inline_func();  // Must be inlined.
+  const char *symbol = TrySymbolize(pc);
+  CHECK(symbol != NULL);
+  CHECK_EQ(0, strcmp(symbol, __FUNCTION__));
+  cout << "Test case TestWithPCInsideInlineFunction passed." << endl;
+#endif
+}
+}
+
+// Test with a return address.
+void ATTRIBUTE_NOINLINE TestWithReturnAddress() {
+#if defined(HAVE_ATTRIBUTE_NOINLINE)
+  void *return_address = __builtin_return_address(0);
+  const char *symbol = TrySymbolize(return_address);
+  CHECK(symbol != NULL);
+  CHECK_EQ(0, strcmp(symbol, "main"));
+  cout << "Test case TestWithReturnAddress passed." << endl;
+#endif
+}
+
+int main(int argc, char **argv) {
+  FLAGS_logtostderr = true;
+  InitGoogleLogging(argv[0]);
+
+  // Symbolize() now only supports ELF binaries.
+  // The test makes sense only if __ELF__ is defined.
+#ifndef __ELF__
+  return 0;
+#else
+  TestWithPCInsideInlineFunction();
+  TestWithPCInsideNonInlineFunction();
+  TestWithReturnAddress();
+  return RUN_ALL_TESTS();
+#endif
+}
+
+#else
+int main() {
+  printf("PASS (no symbolize support)\n");
+  return 0;
+}
+#endif  // HAVE_STACKTRACE
diff --git a/src/utilities.cc b/src/utilities.cc
new file mode 100644
index 0000000..57c030e
--- /dev/null
+++ b/src/utilities.cc
@@ -0,0 +1,172 @@
+#include "utilities.h"
+
+#include <sys/time.h>
+#include <time.h>
+
+#include "base/googleinit.h"
+#include "stacktrace.h"
+#include "symbolize.h"
+
+using std::string;
+
+_START_GOOGLE_NAMESPACE_
+
+static const char* g_program_invocation_short_name = NULL;
+static pthread_t g_main_thread_id;
+
+// The following APIs are all internal.
+#ifdef HAVE_STACKTRACE
+
+#include "stacktrace.h"
+#include "symbolize.h"
+#include "base/commandlineflags.h"
+
+DEFINE_bool(symbolize_stacktrace, true,
+            "Symbolize the stack trace in the tombstone");
+
+typedef void DebugWriter(const char*, void*);
+
+// The %p field width for printf() functions is two characters per byte.
+// For some environments, add two extra bytes for the leading "0x".
+static const int kPrintfPointerFieldWidth = 2 + 2 * sizeof(void*);
+
+static void DebugWriteToStderr(const char* data, void *unused) {
+  // This one is signal-safe.
+  write(STDERR_FILENO, data, strlen(data));
+}
+
+// Print a program counter and its symbol name.
+static void DumpPCAndSymbol(DebugWriter *writerfn, void *arg, void *pc,
+                            const char * const prefix) {
+  char tmp[1024];
+  const char *symbol = "(unknown)";
+  // Symbolizes the previous address of pc because pc may be in the
+  // next function.  The overrun happens when the function ends with
+  // a call to a function annotated noreturn (e.g. CHECK).
+  if (Symbolize(reinterpret_cast<char *>(pc) - 1, tmp, sizeof(tmp))) {
+      symbol = tmp;
+  }
+  char buf[1024];
+  snprintf(buf, sizeof(buf), "%s@ %*p  %s\n",
+           prefix, kPrintfPointerFieldWidth, pc, symbol);
+  writerfn(buf, arg);
+}
+
+// Print a program counter and the corresponding stack frame size.
+static void DumpPCAndFrameSize(DebugWriter *writerfn, void *arg, void *pc,
+                               int framesize, const char * const prefix) {
+  char buf[100];
+  if (framesize <= 0) {
+    snprintf(buf, sizeof(buf), "%s@ %*p  (unknown)\n",
+             prefix, kPrintfPointerFieldWidth, pc);
+  } else {
+    snprintf(buf, sizeof(buf), "%s@ %*p  %9d\n",
+             prefix, kPrintfPointerFieldWidth, pc, framesize);
+  }
+  writerfn(buf, arg);
+}
+
+static void DumpPC(DebugWriter *writerfn, void *arg, void *pc,
+                   const char * const prefix) {
+  char buf[100];
+  snprintf(buf, sizeof(buf), "%s@ %*p\n",
+           prefix, kPrintfPointerFieldWidth, pc);
+  writerfn(buf, arg);
+}
+
+// Dump current stack trace as directed by writerfn
+static void DumpStackTrace(int skip_count, DebugWriter *writerfn, void *arg) {
+  // Print stack trace
+  void* stack[32];
+  int depth = GetStackTrace(stack, sizeof(stack)/sizeof(*stack), skip_count+1);
+  for (int i = 0; i < depth; i++) {
+#if defined(__ELF__)
+    if (FLAGS_symbolize_stacktrace) {
+      DumpPCAndSymbol(writerfn, arg, stack[i], "    ");
+    } else {
+      DumpPC(writerfn, arg, stack[i], "    ");
+    }
+#else
+    DumpPC(writerfn, arg, stack[i], "    ");
+#endif
+  }
+}
+
+static void DumpStackTraceAndExit() {
+  DumpStackTrace(1, DebugWriteToStderr, NULL);
+  exit(1);
+}
+#endif
+
+namespace glog_internal_namespace_ {
+
+const char* ProgramInvocationShortName() {
+  if (g_program_invocation_short_name != NULL) {
+    return g_program_invocation_short_name;
+  } else {
+    // TODO(hamaji): Use /proc/self/cmdline and so?
+    return "UNKNOWN";
+  }
+}
+
+bool IsGoogleLoggingInitialized() {
+  return g_program_invocation_short_name != NULL;
+}
+
+bool is_default_thread() {
+  if (g_program_invocation_short_name == NULL) {
+    // InitGoogleLogging() not yet called, so unlikely to be in a different
+    // thread
+    return true;
+  } else {
+    return pthread_equal(pthread_self(), g_main_thread_id);
+  }
+}
+
+int64 CycleClock_Now() {
+  // TODO(hamaji): temporary impementation - it might be too slow.
+  struct timeval tv;
+  gettimeofday(&tv, NULL);
+  return static_cast<int64>(tv.tv_sec) * 1000000 + tv.tv_usec;
+}
+
+int64 UsecToCycles(int64 usec) {
+  return usec;
+}
+
+static int32 g_main_thread_pid = getpid();
+int32 GetMainThreadPid() {
+  return g_main_thread_pid;
+}
+
+static string g_my_user_name;
+const string& MyUserName() {
+  return g_my_user_name;
+}
+static void MyUserNameInitializer() {
+  // TODO(hamaji): Probably this is not portable.
+  const char* user = getenv("USER");
+  if (user != NULL) {
+    g_my_user_name = user;
+  } else {
+    g_my_user_name = "invalid-user";
+  }
+}
+REGISTER_MODULE_INITIALIZER(utilities, MyUserNameInitializer());
+
+}  // namespace glog_internal_namespace_
+
+void InitGoogleLogging(const char* argv0) {
+  const char* slash = strrchr(argv0, '/');
+#ifdef OS_WINDOWS
+  if (!slash)  slash = strrchr(argv0, '\\');
+#endif
+  g_program_invocation_short_name = slash ? slash + 1 : argv0;
+  g_main_thread_id = pthread_self();
+
+#ifdef HAVE_STACKTRACE
+  InstallFailureFunction(&DumpStackTraceAndExit);
+#endif
+}
+
+_END_GOOGLE_NAMESPACE_
diff --git a/src/utilities.h b/src/utilities.h
new file mode 100644
index 0000000..a2e846f
--- /dev/null
+++ b/src/utilities.h
@@ -0,0 +1,79 @@
+// Define utilties for glog internal usage.
+
+#ifndef UTILITIES_H__
+#define UTILITIES_H__
+
+#if defined(WIN32) || defined(_WIN32) || defined(__WIN32__) || defined(__CYGWIN__) || defined(__CYGWIN32__)
+# define OS_WINDOWS
+#elif defined(linux) || defined(__linux) || defined(__linux__)
+# define OS_LINUX
+#elif defined(macintosh) || defined(__APPLE__) || defined(__APPLE_CC__)
+# define OS_MACOSX
+#elif defined(__FreeBSD__)
+# define OS_FREEBSD
+#else
+// TODO(hamaji): Add other platforms.
+#endif
+
+// printf macros for size_t, in the style of inttypes.h
+#ifdef _LP64
+#define __PRIS_PREFIX "z"
+#else
+#define __PRIS_PREFIX
+#endif
+
+// Use these macros after a % in a printf format string
+// to get correct 32/64 bit behavior, like this:
+// size_t size = records.size();
+// printf("%"PRIuS"\n", size);
+
+#define PRIdS __PRIS_PREFIX "d"
+#define PRIxS __PRIS_PREFIX "x"
+#define PRIuS __PRIS_PREFIX "u"
+#define PRIXS __PRIS_PREFIX "X"
+#define PRIoS __PRIS_PREFIX "o"
+
+#include "base/mutex.h"  // This must go first so we get _XOPEN_SOURCE
+
+#include <string>
+
+#include "config.h"
+#include "glog/logging.h"
+
+#if defined(HAVE_EXECINFO_H)
+# define HAVE_STACKTRACE
+#elif defined(STACKTRACE_WITH_FRAME_POINTER)
+# define HAVE_STACKTRACE
+#endif
+
+_START_GOOGLE_NAMESPACE_
+
+namespace glog_internal_namespace_ {
+
+#ifdef HAVE___ATTRIBUTE__
+# define ATTRIBUTE_NOINLINE __attribute__ ((noinline))
+# define HAVE_ATTRIBUTE_NOINLINE
+#else
+# define ATTRIBUTE_NOINLINE
+#endif
+
+const char* ProgramInvocationShortName();
+
+bool IsGoogleLoggingInitialized();
+
+bool is_default_thread();
+
+int64 CycleClock_Now();
+
+int64 UsecToCycles(int64 usec);
+
+int32 GetMainThreadPid();
+
+const std::string& MyUserName();
+
+}
+_END_GOOGLE_NAMESPACE_
+
+using namespace GOOGLE_NAMESPACE::glog_internal_namespace_;
+
+#endif  // UTILITIES_H__
diff --git a/src/vlog_is_on.cc b/src/vlog_is_on.cc
new file mode 100644
index 0000000..4f2a552
--- /dev/null
+++ b/src/vlog_is_on.cc
@@ -0,0 +1,218 @@
+// Copyright 1999, 2007 Google Inc. All Rights Reserved.
+// Author: Ray Sidney and many others
+// Broken out from logging.cc by Soren Lassen
+// logging_unittest.cc covers the functionality herein
+
+#include "utilities.h"
+
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <fnmatch.h>  // fnmatch() is used in obsolete _InitVLOG
+#include <cstdio>
+#include <string>
+#include "base/commandlineflags.h"
+#include "glog/logging.h"
+#include "glog/raw_logging.h"
+#include "base/googleinit.h"
+
+// glog doesn't have annotation
+#define ANNOTATE_BENIGN_RACE(address, description)
+
+using std::string;
+
+DEFINE_int32(v, 0, "Show all VLOG(m) messages for m <= this."
+" Overridable by --vmodule.");
+
+DEFINE_string(vmodule, "", "per-module verbose level."
+" Argument is a comma-separated list of <module name>=<log level>."
+" <module name> is a glob pattern, matched against the filename base"
+" (that is, name ignoring .cc/.h./-inl.h)."
+" <log level> overrides any value given by --v.");
+
+_START_GOOGLE_NAMESPACE_
+
+// Implementation of fnmatch that does not need 0-termination
+// of arguments and does not allocate any memory,
+// but we only support "*" and "?" wildcards, not the "[...]" patterns.
+// It's not a static function for the unittest.
+bool SafeFNMatch_(const char* pattern, size_t patt_len,
+                  const char* str, size_t str_len) {
+  int p = 0;
+  int s = 0;
+  while (1) {
+    if (p == patt_len  &&  s == str_len) return true;
+    if (p == patt_len) return false;
+    if (s == str_len) return p+1 == patt_len  &&  pattern[p] == '*';
+    if (pattern[p] == str[s]  ||  pattern[p] == '?') {
+      p += 1;
+      s += 1;
+      continue;
+    }
+    if (pattern[p] == '*') {
+      if (p+1 == patt_len) return true;
+      do {
+        if (SafeFNMatch_(pattern+(p+1), patt_len-(p+1), str+s, str_len-s)) {
+          return true;
+        }
+        s += 1;
+      } while (s != str_len);
+      return false;
+    }
+    return false;
+  }
+}
+
+int32 kLogSiteUninitialized = 1000;
+
+// List of per-module log levels from FLAGS_vmodule.
+// Once created each element is never deleted/modified
+// except for the vlog_level: other threads will read VModuleInfo blobs
+// w/o locks and we'll store pointers to vlog_level at VLOG locations
+// that will never go away.
+// We can't use an STL struct here as we wouldn't know
+// when it's safe to delete/update it: other threads need to use it w/o locks.
+struct VModuleInfo {
+  string module_pattern;
+  mutable int32 vlog_level;  // Conceptually this is an AtomicWord, but it's
+                             // too much work to use AtomicWord type here
+                             // w/o much actual benefit.
+  const VModuleInfo* next;
+};
+
+// This protects the following global variables.
+static Mutex vmodule_lock;
+// Pointer to head of the VModuleInfo list.
+// It's a map from module pattern to logging level for those module(s).
+static VModuleInfo* vmodule_list = 0;
+// Boolean initialization flag.
+static bool inited_vmodule = false;
+
+static void VLOG2Initializer() {
+  MutexLock l(&vmodule_lock);
+  // Can now parse --vmodule flag and initialize mapping of module-specific
+  // logging levels.
+  inited_vmodule = false;
+  const char* vmodule = FLAGS_vmodule.c_str();
+  const char* sep;
+  VModuleInfo* head = NULL;
+  VModuleInfo* tail = NULL;
+  while ((sep = strchr(vmodule, '=')) != NULL) {
+    string pattern(vmodule, sep - vmodule);
+    int module_level;
+    if (sscanf(sep, "=%d", &module_level) == 1) {
+      VModuleInfo* info = new VModuleInfo;
+      info->module_pattern = pattern;
+      info->vlog_level = module_level;
+      if (head)  tail->next = info;
+      else  head = info;
+      tail = info;
+    }
+    // Skip past this entry
+    vmodule = strchr(sep, ',');
+    if (vmodule == NULL) break;
+    vmodule++;  // Skip past ","
+  }
+  if (head) {  // Put them into the list at the head:
+    tail->next = vmodule_list;
+    vmodule_list = head;
+  }
+  inited_vmodule = true;
+}
+
+REGISTER_MODULE_INITIALIZER(vlog_is_on, VLOG2Initializer());
+
+// This can be called very early, so we use SpinLock and RAW_VLOG here.
+int SetVLOGLevel(const char* module_pattern, int log_level) {
+  int result = FLAGS_v;
+  int const pattern_len = strlen(module_pattern);
+  bool found = false;
+  MutexLock l(&vmodule_lock);  // protect whole read-modify-write
+  for (const VModuleInfo* info = vmodule_list;
+       info != NULL; info = info->next) {
+    if (info->module_pattern == module_pattern) {
+      if (!found) {
+        result = info->vlog_level;
+        found = true;
+      }
+      info->vlog_level = log_level;
+    } else if (!found  &&
+               SafeFNMatch_(info->module_pattern.c_str(),
+                            info->module_pattern.size(),
+                            module_pattern, pattern_len)) {
+      result = info->vlog_level;
+      found = true;
+    }
+  }
+  if (!found) {
+    VModuleInfo* info = new VModuleInfo;
+    info->module_pattern = module_pattern;
+    info->vlog_level = log_level;
+    info->next = vmodule_list;
+    vmodule_list = info;
+  }
+  RAW_VLOG(1, "Set VLOG level for \"%s\" to %d", module_pattern, log_level);
+  return result;
+}
+
+// NOTE: Individual VLOG statements cache the integer log level pointers.
+// NOTE: This function must not allocate memory or require any locks.
+bool InitVLOG3__(int32** site_flag, int32* site_default,
+                 const char* fname, int32 verbose_level) {
+  MutexLock l(&vmodule_lock);
+  bool read_vmodule_flag = inited_vmodule;
+  if (!read_vmodule_flag  &&  vmodule_list == 0) {
+    // The command line --vmodule flags haven't been parsed
+    // and nothing was set with SetVLOGLevel yet,
+    // but *site_default (usually FLAGS_v) might be manually set
+    // by some early-executing code, or else it's still 0.
+    return *site_default >= verbose_level;
+  }
+
+  // protect the errno global in case someone writes:
+  // VLOG(..) << "The last error was " << strerror(errno)
+  int old_errno = errno;
+
+  // site_default normally points to FLAGS_v
+  int32* site_flag_value = site_default;
+
+  // Get basename for file
+  const char* base = strrchr(fname, '/');
+  base = base ? (base+1) : fname;
+  const char* base_end = strchr(base, '.');
+  size_t base_length = base_end ? (base_end - base) : strlen(base);
+
+  // Trim out trailing "-inl" if any
+  if (base_length >= 4 && (memcmp(base+base_length-4, "-inl", 4) == 0)) {
+    base_length -= 4;
+  }
+
+  // TODO: Trim out _unittest suffix?  Perhaps it is better to have
+  // the extra control and just leave it there.
+
+  // find target in vector of modules, replace site_flag_value with
+  // a module-specific verbose level, if any.
+  for (const VModuleInfo* info = vmodule_list;
+       info != NULL; info = info->next) {
+    if (SafeFNMatch_(info->module_pattern.c_str(), info->module_pattern.size(),
+                     base, base_length)) {
+      site_flag_value = &info->vlog_level;
+        // value at info->vlog_level is now what controls
+        // the VLOG at the caller site forever
+      break;
+    }
+  }
+
+  // Cache the vlog value pointer if --vmodule flag has been parsed.
+  ANNOTATE_BENIGN_RACE(site_flag,
+                       "*site_flag may be written by several threads,"
+                       " but the value will be the same");
+  if (read_vmodule_flag) *site_flag = site_flag_value;
+
+  // restore the errno in case something recoverable went wrong during
+  // the initialization of the VLOG mechanism (see above note "protect the..")
+  errno = old_errno;
+  return *site_flag_value >= verbose_level;
+}
+
+_END_GOOGLE_NAMESPACE_