/* GLib testing utilities
 * Copyright (C) 2007 Imendio AB
 * Authors: Tim Janik, Sven Herzberg
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
 */

#include "config.h"

#include "gtestutils.h"
#include "gfileutils.h"

#include <sys/types.h>
#ifdef G_OS_UNIX
#include <sys/wait.h>
#include <sys/time.h>
#include <fcntl.h>
#include <unistd.h>
#include <glib/gstdio.h>
#endif
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif
#ifdef G_OS_WIN32
#include <io.h>
#include <windows.h>
#endif
#include <errno.h>
#include <signal.h>
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif /* HAVE_SYS_SELECT_H */

#include "gmain.h"
#include "gpattern.h"
#include "grand.h"
#include "gstrfuncs.h"
#include "gtimer.h"
#include "gslice.h"
#include "gspawn.h"
#include "glib-private.h"


/**
 * SECTION:testing
 * @title: Testing
 * @short_description: a test framework
 * @see_also: [gtester][gtester], [gtester-report][gtester-report]
 *
 * GLib provides a framework for writing and maintaining unit tests
 * in parallel to the code they are testing. The API is designed according
 * to established concepts found in the other test frameworks (JUnit, NUnit,
 * RUnit), which in turn is based on smalltalk unit testing concepts.
 *
 * - Test case: Tests (test methods) are grouped together with their
 *   fixture into test cases.
 *
 * - Fixture: A test fixture consists of fixture data and setup and
 *   teardown methods to establish the environment for the test
 *   functions. We use fresh fixtures, i.e. fixtures are newly set
 *   up and torn down around each test invocation to avoid dependencies
 *   between tests.
 *
 * - Test suite: Test cases can be grouped into test suites, to allow
 *   subsets of the available tests to be run. Test suites can be
 *   grouped into other test suites as well.
 *
 * The API is designed to handle creation and registration of test suites
 * and test cases implicitly. A simple call like
 * |[<!-- language="C" --> 
 *   g_test_add_func ("/misc/assertions", test_assertions);
 * ]|
 * creates a test suite called "misc" with a single test case named
 * "assertions", which consists of running the test_assertions function.
 *
 * In addition to the traditional g_assert(), the test framework provides
 * an extended set of assertions for string and numerical comparisons:
 * g_assert_cmpfloat(), g_assert_cmpint(), g_assert_cmpuint(),
 * g_assert_cmphex(), g_assert_cmpstr(). The advantage of these variants
 * over plain g_assert() is that the assertion messages can be more
 * elaborate, and include the values of the compared entities.
 *
 * GLib ships with two utilities called gtester and gtester-report to
 * facilitate running tests and producing nicely formatted test reports.
 */

/**
 * g_test_initialized:
 *
 * Returns %TRUE if g_test_init() has been called.
 *
 * Returns: %TRUE if g_test_init() has been called.
 *
 * Since: 2.36
 */

/**
 * g_test_quick:
 *
 * Returns %TRUE if tests are run in quick mode.
 * Exactly one of g_test_quick() and g_test_slow() is active in any run;
 * there is no "medium speed".
 *
 * Returns: %TRUE if in quick mode
 */

/**
 * g_test_slow:
 *
 * Returns %TRUE if tests are run in slow mode.
 * Exactly one of g_test_quick() and g_test_slow() is active in any run;
 * there is no "medium speed".
 *
 * Returns: the opposite of g_test_quick()
 */

/**
 * g_test_thorough:
 *
 * Returns %TRUE if tests are run in thorough mode, equivalent to
 * g_test_slow().
 *
 * Returns: the same thing as g_test_slow()
 */

/**
 * g_test_perf:
 *
 * Returns %TRUE if tests are run in performance mode.
 *
 * Returns: %TRUE if in performance mode
 */

/**
 * g_test_undefined:
 *
 * Returns %TRUE if tests may provoke assertions and other formally-undefined
 * behaviour, to verify that appropriate warnings are given. It might, in some
 * cases, be useful to turn this off if running tests under valgrind.
 *
 * Returns: %TRUE if tests may provoke programming errors
 */

/**
 * g_test_verbose:
 *
 * Returns %TRUE if tests are run in verbose mode.
 * The default is neither g_test_verbose() nor g_test_quiet().
 *
 * Returns: %TRUE if in verbose mode
 */

/**
 * g_test_quiet:
 *
 * Returns %TRUE if tests are run in quiet mode.
 * The default is neither g_test_verbose() nor g_test_quiet().
 *
 * Returns: %TRUE if in quiet mode
 */

/**
 * g_test_queue_unref:
 * @gobject: the object to unref
 *
 * Enqueue an object to be released with g_object_unref() during
 * the next teardown phase. This is equivalent to calling
 * g_test_queue_destroy() with a destroy callback of g_object_unref().
 *
 * Since: 2.16
 */

/**
 * GTestTrapFlags:
 * @G_TEST_TRAP_SILENCE_STDOUT: Redirect stdout of the test child to
 *     `/dev/null` so it cannot be observed on the console during test
 *     runs. The actual output is still captured though to allow later
 *     tests with g_test_trap_assert_stdout().
 * @G_TEST_TRAP_SILENCE_STDERR: Redirect stderr of the test child to
 *     `/dev/null` so it cannot be observed on the console during test
 *     runs. The actual output is still captured though to allow later
 *     tests with g_test_trap_assert_stderr().
 * @G_TEST_TRAP_INHERIT_STDIN: If this flag is given, stdin of the
 *     child process is shared with stdin of its parent process.
 *     It is redirected to `/dev/null` otherwise.
 *
 * Test traps are guards around forked tests.
 * These flags determine what traps to set.
 *
 * Deprecated: #GTestTrapFlags is used only with g_test_trap_fork(),
 * which is deprecated. g_test_trap_subprocess() uses
 * #GTestTrapSubprocessFlags.
 */

/**
 * GTestSubprocessFlags:
 * @G_TEST_SUBPROCESS_INHERIT_STDIN: If this flag is given, the child
 *     process will inherit the parent's stdin. Otherwise, the child's
 *     stdin is redirected to `/dev/null`.
 * @G_TEST_SUBPROCESS_INHERIT_STDOUT: If this flag is given, the child
 *     process will inherit the parent's stdout. Otherwise, the child's
 *     stdout will not be visible, but it will be captured to allow
 *     later tests with g_test_trap_assert_stdout().
 * @G_TEST_SUBPROCESS_INHERIT_STDERR: If this flag is given, the child
 *     process will inherit the parent's stderr. Otherwise, the child's
 *     stderr will not be visible, but it will be captured to allow
 *     later tests with g_test_trap_assert_stderr().
 *
 * Flags to pass to g_test_trap_subprocess() to control input and output.
 *
 * Note that in contrast with g_test_trap_fork(), the default is to
 * not show stdout and stderr.
 */

/**
 * g_test_trap_assert_passed:
 *
 * Assert that the last test subprocess passed.
 * See g_test_trap_subprocess().
 *
 * Since: 2.16
 */

/**
 * g_test_trap_assert_failed:
 *
 * Assert that the last test subprocess failed.
 * See g_test_trap_subprocess().
 *
 * This is sometimes used to test situations that are formally considered to
 * be undefined behaviour, like inputs that fail a g_return_if_fail()
 * check. In these situations you should skip the entire test, including the
 * call to g_test_trap_subprocess(), unless g_test_undefined() returns %TRUE
 * to indicate that undefined behaviour may be tested.
 *
 * Since: 2.16
 */

/**
 * g_test_trap_assert_stdout:
 * @soutpattern: a glob-style [pattern][glib-Glob-style-pattern-matching]
 *
 * Assert that the stdout output of the last test subprocess matches
 * @soutpattern. See g_test_trap_subprocess().
 *
 * Since: 2.16
 */

/**
 * g_test_trap_assert_stdout_unmatched:
 * @soutpattern: a glob-style [pattern][glib-Glob-style-pattern-matching]
 *
 * Assert that the stdout output of the last test subprocess
 * does not match @soutpattern. See g_test_trap_subprocess().
 *
 * Since: 2.16
 */

/**
 * g_test_trap_assert_stderr:
 * @serrpattern: a glob-style [pattern][glib-Glob-style-pattern-matching]
 *
 * Assert that the stderr output of the last test subprocess
 * matches @serrpattern. See  g_test_trap_subprocess().
 *
 * This is sometimes used to test situations that are formally
 * considered to be undefined behaviour, like code that hits a
 * g_assert() or g_error(). In these situations you should skip the
 * entire test, including the call to g_test_trap_subprocess(), unless
 * g_test_undefined() returns %TRUE to indicate that undefined
 * behaviour may be tested.
 *
 * Since: 2.16
 */

/**
 * g_test_trap_assert_stderr_unmatched:
 * @serrpattern: a glob-style [pattern][glib-Glob-style-pattern-matching]
 *
 * Assert that the stderr output of the last test subprocess
 * does not match @serrpattern. See g_test_trap_subprocess().
 *
 * Since: 2.16
 */

/**
 * g_test_rand_bit:
 *
 * Get a reproducible random bit (0 or 1), see g_test_rand_int()
 * for details on test case random numbers.
 *
 * Since: 2.16
 */

/**
 * g_assert:
 * @expr: the expression to check
 *
 * Debugging macro to terminate the application if the assertion
 * fails. If the assertion fails (i.e. the expression is not true),
 * an error message is logged and the application is terminated.
 *
 * The macro can be turned off in final releases of code by defining
 * `G_DISABLE_ASSERT` when compiling the application.
 */

/**
 * g_assert_not_reached:
 *
 * Debugging macro to terminate the application if it is ever
 * reached. If it is reached, an error message is logged and the
 * application is terminated.
 *
 * The macro can be turned off in final releases of code by defining
 * `G_DISABLE_ASSERT` when compiling the application.
 */

/**
 * g_assert_true:
 * @expr: the expression to check
 *
 * Debugging macro to check that an expression is true.
 *
 * If the assertion fails (i.e. the expression is not true),
 * an error message is logged and the application is either
 * terminated or the testcase marked as failed.
 *
 * See g_test_set_nonfatal_assertions().
 *
 * Since: 2.38
 */

/**
 * g_assert_false:
 * @expr: the expression to check
 *
 * Debugging macro to check an expression is false.
 *
 * If the assertion fails (i.e. the expression is not false),
 * an error message is logged and the application is either
 * terminated or the testcase marked as failed.
 *
 * See g_test_set_nonfatal_assertions().
 *
 * Since: 2.38
 */

/**
 * g_assert_null:
 * @expr: the expression to check
 *
 * Debugging macro to check an expression is %NULL.
 *
 * If the assertion fails (i.e. the expression is not %NULL),
 * an error message is logged and the application is either
 * terminated or the testcase marked as failed.
 *
 * See g_test_set_nonfatal_assertions().
 *
 * Since: 2.38
 */

/**
 * g_assert_nonnull:
 * @expr: the expression to check
 *
 * Debugging macro to check an expression is not %NULL.
 *
 * If the assertion fails (i.e. the expression is %NULL),
 * an error message is logged and the application is either
 * terminated or the testcase marked as failed.
 *
 * See g_test_set_nonfatal_assertions().
 *
 * Since: 2.40
 */

/**
 * g_assert_cmpstr:
 * @s1: a string (may be %NULL)
 * @cmp: The comparison operator to use.
 *     One of ==, !=, <, >, <=, >=.
 * @s2: another string (may be %NULL)
 *
 * Debugging macro to compare two strings. If the comparison fails,
 * an error message is logged and the application is either terminated
 * or the testcase marked as failed.
 * The strings are compared using g_strcmp0().
 *
 * The effect of `g_assert_cmpstr (s1, op, s2)` is
 * the same as `g_assert_true (g_strcmp0 (s1, s2) op 0)`.
 * The advantage of this macro is that it can produce a message that
 * includes the actual values of @s1 and @s2.
 *
 * |[<!-- language="C" --> 
 *   g_assert_cmpstr (mystring, ==, "fubar");
 * ]|
 *
 * Since: 2.16
 */

/**
 * g_assert_cmpint:
 * @n1: an integer
 * @cmp: The comparison operator to use.
 *     One of ==, !=, <, >, <=, >=.
 * @n2: another integer
 *
 * Debugging macro to compare two integers.
 *
 * The effect of `g_assert_cmpint (n1, op, n2)` is
 * the same as `g_assert_true (n1 op n2)`. The advantage
 * of this macro is that it can produce a message that includes the
 * actual values of @n1 and @n2.
 *
 * Since: 2.16
 */

/**
 * g_assert_cmpuint:
 * @n1: an unsigned integer
 * @cmp: The comparison operator to use.
 *     One of ==, !=, <, >, <=, >=.
 * @n2: another unsigned integer
 *
 * Debugging macro to compare two unsigned integers.
 *
 * The effect of `g_assert_cmpuint (n1, op, n2)` is
 * the same as `g_assert_true (n1 op n2)`. The advantage
 * of this macro is that it can produce a message that includes the
 * actual values of @n1 and @n2.
 *
 * Since: 2.16
 */

/**
 * g_assert_cmphex:
 * @n1: an unsigned integer
 * @cmp: The comparison operator to use.
 *     One of ==, !=, <, >, <=, >=.
 * @n2: another unsigned integer
 *
 * Debugging macro to compare to unsigned integers.
 *
 * This is a variant of g_assert_cmpuint() that displays the numbers
 * in hexadecimal notation in the message.
 *
 * Since: 2.16
 */

/**
 * g_assert_cmpfloat:
 * @n1: an floating point number
 * @cmp: The comparison operator to use.
 *     One of ==, !=, <, >, <=, >=.
 * @n2: another floating point number
 *
 * Debugging macro to compare two floating point numbers.
 *
 * The effect of `g_assert_cmpfloat (n1, op, n2)` is
 * the same as `g_assert_true (n1 op n2)`. The advantage
 * of this macro is that it can produce a message that includes the
 * actual values of @n1 and @n2.
 *
 * Since: 2.16
 */

/**
 * g_assert_no_error:
 * @err: a #GError, possibly %NULL
 *
 * Debugging macro to check that a #GError is not set.
 *
 * The effect of `g_assert_no_error (err)` is
 * the same as `g_assert_true (err == NULL)`. The advantage
 * of this macro is that it can produce a message that includes
 * the error message and code.
 *
 * Since: 2.20
 */

/**
 * g_assert_error:
 * @err: a #GError, possibly %NULL
 * @dom: the expected error domain (a #GQuark)
 * @c: the expected error code
 *
 * Debugging macro to check that a method has returned
 * the correct #GError.
 *
 * The effect of `g_assert_error (err, dom, c)` is
 * the same as `g_assert_true (err != NULL && err->domain
 * == dom && err->code == c)`. The advantage of this
 * macro is that it can produce a message that includes the incorrect
 * error message and code.
 *
 * This can only be used to test for a specific error. If you want to
 * test that @err is set, but don't care what it's set to, just use
 * `g_assert (err != NULL)`
 *
 * Since: 2.20
 */

/**
 * GTestCase:
 *
 * An opaque structure representing a test case.
 */

/**
 * GTestSuite:
 *
 * An opaque structure representing a test suite.
 */


/* Global variable for storing assertion messages; this is the counterpart to
 * glibc's (private) __abort_msg variable, and allows developers and crash
 * analysis systems like Apport and ABRT to fish out assertion messages from
 * core dumps, instead of having to catch them on screen output.
 */
GLIB_VAR char *__glib_assert_msg;
char *__glib_assert_msg = NULL;

/* --- constants --- */
#define G_TEST_STATUS_TIMED_OUT 1024

/* --- structures --- */
struct GTestCase
{
  gchar  *name;
  guint   fixture_size;
  void   (*fixture_setup)    (void*, gconstpointer);
  void   (*fixture_test)     (void*, gconstpointer);
  void   (*fixture_teardown) (void*, gconstpointer);
  gpointer test_data;
};
struct GTestSuite
{
  gchar  *name;
  GSList *suites;
  GSList *cases;
};
typedef struct DestroyEntry DestroyEntry;
struct DestroyEntry
{
  DestroyEntry *next;
  GDestroyNotify destroy_func;
  gpointer       destroy_data;
};

/* --- prototypes --- */
static void     test_run_seed                   (const gchar *rseed);
static void     test_trap_clear                 (void);
static guint8*  g_test_log_dump                 (GTestLogMsg *msg,
                                                 guint       *len);
static void     gtest_default_log_handler       (const gchar    *log_domain,
                                                 GLogLevelFlags  log_level,
                                                 const gchar    *message,
                                                 gpointer        unused_data);


typedef enum {
  G_TEST_RUN_SUCCESS,
  G_TEST_RUN_SKIPPED,
  G_TEST_RUN_FAILURE,
  G_TEST_RUN_INCOMPLETE
} GTestResult;

/* --- variables --- */
static int         test_log_fd = -1;
static gboolean    test_mode_fatal = TRUE;
static gboolean    g_test_run_once = TRUE;
static gboolean    test_run_list = FALSE;
static gchar      *test_run_seedstr = NULL;
static GRand      *test_run_rand = NULL;
static gchar      *test_run_name = "";
static GSList    **test_filename_free_list;
static guint       test_run_forks = 0;
static guint       test_run_count = 0;
static guint       test_skipped_count = 0;
static GTestResult test_run_success = G_TEST_RUN_FAILURE;
static gchar      *test_run_msg = NULL;
static guint       test_startup_skip_count = 0;
static GTimer     *test_user_timer = NULL;
static double      test_user_stamp = 0;
static GSList     *test_paths = NULL;
static GSList     *test_paths_skipped = NULL;
static GTestSuite *test_suite_root = NULL;
static int         test_trap_last_status = 0;
static GPid        test_trap_last_pid = 0;
static char       *test_trap_last_subprocess = NULL;
static char       *test_trap_last_stdout = NULL;
static char       *test_trap_last_stderr = NULL;
static char       *test_uri_base = NULL;
static gboolean    test_debug_log = FALSE;
static gboolean    test_tap_log = FALSE;
static gboolean    test_nonfatal_assertions = FALSE;
static DestroyEntry *test_destroy_queue = NULL;
static char       *test_argv0 = NULL;
static char       *test_argv0_dirname;
static const char *test_disted_files_dir;
static const char *test_built_files_dir;
static char       *test_initial_cwd = NULL;
static gboolean    test_in_subprocess = FALSE;
static GTestConfig mutable_test_config_vars = {
  FALSE,        /* test_initialized */
  TRUE,         /* test_quick */
  FALSE,        /* test_perf */
  FALSE,        /* test_verbose */
  FALSE,        /* test_quiet */
  TRUE,         /* test_undefined */
};
const GTestConfig * const g_test_config_vars = &mutable_test_config_vars;
static gboolean  no_g_set_prgname = FALSE;

/* --- functions --- */
const char*
g_test_log_type_name (GTestLogType log_type)
{
  switch (log_type)
    {
    case G_TEST_LOG_NONE:               return "none";
    case G_TEST_LOG_ERROR:              return "error";
    case G_TEST_LOG_START_BINARY:       return "binary";
    case G_TEST_LOG_LIST_CASE:          return "list";
    case G_TEST_LOG_SKIP_CASE:          return "skip";
    case G_TEST_LOG_START_CASE:         return "start";
    case G_TEST_LOG_STOP_CASE:          return "stop";
    case G_TEST_LOG_MIN_RESULT:         return "minperf";
    case G_TEST_LOG_MAX_RESULT:         return "maxperf";
    case G_TEST_LOG_MESSAGE:            return "message";
    case G_TEST_LOG_START_SUITE:        return "start suite";
    case G_TEST_LOG_STOP_SUITE:         return "stop suite";
    }
  return "???";
}

static void
g_test_log_send (guint         n_bytes,
                 const guint8 *buffer)
{
  if (test_log_fd >= 0)
    {
      int r;
      do
        r = write (test_log_fd, buffer, n_bytes);
      while (r < 0 && errno == EINTR);
    }
  if (test_debug_log)
    {
      GTestLogBuffer *lbuffer = g_test_log_buffer_new ();
      GTestLogMsg *msg;
      guint ui;
      g_test_log_buffer_push (lbuffer, n_bytes, buffer);
      msg = g_test_log_buffer_pop (lbuffer);
      g_warn_if_fail (msg != NULL);
      g_warn_if_fail (lbuffer->data->len == 0);
      g_test_log_buffer_free (lbuffer);
      /* print message */
      g_printerr ("{*LOG(%s)", g_test_log_type_name (msg->log_type));
      for (ui = 0; ui < msg->n_strings; ui++)
        g_printerr (":{%s}", msg->strings[ui]);
      if (msg->n_nums)
        {
          g_printerr (":(");
          for (ui = 0; ui < msg->n_nums; ui++)
            {
              if ((long double) (long) msg->nums[ui] == msg->nums[ui])
                g_printerr ("%s%ld", ui ? ";" : "", (long) msg->nums[ui]);
              else
                g_printerr ("%s%.16g", ui ? ";" : "", (double) msg->nums[ui]);
            }
          g_printerr (")");
        }
      g_printerr (":LOG*}\n");
      g_test_log_msg_free (msg);
    }
}

static void
g_test_log (GTestLogType lbit,
            const gchar *string1,
            const gchar *string2,
            guint        n_args,
            long double *largs)
{
  gboolean fail;
  GTestLogMsg msg;
  gchar *astrings[3] = { NULL, NULL, NULL };
  guint8 *dbuffer;
  guint32 dbufferlen;

  switch (lbit)
    {
    case G_TEST_LOG_START_BINARY:
      if (test_tap_log)
        g_print ("# random seed: %s\n", string2);
      else if (g_test_verbose())
        g_print ("GTest: random seed: %s\n", string2);
      break;
    case G_TEST_LOG_START_SUITE:
      if (test_tap_log)
        {
          if (string1[0] != 0)
            g_print ("# Start of %s tests\n", string1);
        }
      break;
    case G_TEST_LOG_STOP_SUITE:
      if (test_tap_log)
        {
          if (string1[0] != 0)
            g_print ("# End of %s tests\n", string1);
          else
            g_print ("1..%d\n", test_run_count);
        }
      break;
    case G_TEST_LOG_STOP_CASE:
      fail = largs[0] != G_TEST_RUN_SUCCESS && largs[0] != G_TEST_RUN_SKIPPED;
      if (test_tap_log)
        {
          g_print ("%s %d %s", fail ? "not ok" : "ok", test_run_count, string1);
          if (largs[0] == G_TEST_RUN_INCOMPLETE)
            g_print (" # TODO %s\n", string2 ? string2 : "");
          else if (largs[0] == G_TEST_RUN_SKIPPED)
            g_print (" # SKIP %s\n", string2 ? string2 : "");
          else
            g_print ("\n");
        }
      else if (g_test_verbose())
        g_print ("GTest: result: %s\n", fail ? "FAIL" : "OK");
      else if (!g_test_quiet())
        g_print ("%s\n", fail ? "FAIL" : "OK");
      if (fail && test_mode_fatal)
        {
          if (test_tap_log)
            g_print ("Bail out!\n");
          abort();
        }
      if (largs[0] == G_TEST_RUN_SKIPPED)
        test_skipped_count++;
      break;
    case G_TEST_LOG_MIN_RESULT:
      if (test_tap_log)
        g_print ("# min perf: %s\n", string1);
      else if (g_test_verbose())
        g_print ("(MINPERF:%s)\n", string1);
      break;
    case G_TEST_LOG_MAX_RESULT:
      if (test_tap_log)
        g_print ("# max perf: %s\n", string1);
      else if (g_test_verbose())
        g_print ("(MAXPERF:%s)\n", string1);
      break;
    case G_TEST_LOG_MESSAGE:
    case G_TEST_LOG_ERROR:
      if (test_tap_log)
        g_print ("# %s\n", string1);
      else if (g_test_verbose())
        g_print ("(MSG: %s)\n", string1);
      break;
    default: ;
    }

  msg.log_type = lbit;
  msg.n_strings = (string1 != NULL) + (string1 && string2);
  msg.strings = astrings;
  astrings[0] = (gchar*) string1;
  astrings[1] = astrings[0] ? (gchar*) string2 : NULL;
  msg.n_nums = n_args;
  msg.nums = largs;
  dbuffer = g_test_log_dump (&msg, &dbufferlen);
  g_test_log_send (dbufferlen, dbuffer);
  g_free (dbuffer);

  switch (lbit)
    {
    case G_TEST_LOG_START_CASE:
      if (test_tap_log)
        ;
      else if (g_test_verbose())
        g_print ("GTest: run: %s\n", string1);
      else if (!g_test_quiet())
        g_print ("%s: ", string1);
      break;
    default: ;
    }
}

/* We intentionally parse the command line without GOptionContext
 * because otherwise you would never be able to test it.
 */
static void
parse_args (gint    *argc_p,
            gchar ***argv_p)
{
  guint argc = *argc_p;
  gchar **argv = *argv_p;
  guint i, e;

  test_argv0 = argv[0];
  test_initial_cwd = g_get_current_dir ();

  /* parse known args */
  for (i = 1; i < argc; i++)
    {
      if (strcmp (argv[i], "--g-fatal-warnings") == 0)
        {
          GLogLevelFlags fatal_mask = (GLogLevelFlags) g_log_set_always_fatal ((GLogLevelFlags) G_LOG_FATAL_MASK);
          fatal_mask = (GLogLevelFlags) (fatal_mask | G_LOG_LEVEL_WARNING | G_LOG_LEVEL_CRITICAL);
          g_log_set_always_fatal (fatal_mask);
          argv[i] = NULL;
        }
      else if (strcmp (argv[i], "--keep-going") == 0 ||
               strcmp (argv[i], "-k") == 0)
        {
          test_mode_fatal = FALSE;
          argv[i] = NULL;
        }
      else if (strcmp (argv[i], "--debug-log") == 0)
        {
          test_debug_log = TRUE;
          argv[i] = NULL;
        }
      else if (strcmp (argv[i], "--tap") == 0)
        {
          test_tap_log = TRUE;
          argv[i] = NULL;
        }
      else if (strcmp ("--GTestLogFD", argv[i]) == 0 || strncmp ("--GTestLogFD=", argv[i], 13) == 0)
        {
          gchar *equal = argv[i] + 12;
          if (*equal == '=')
            test_log_fd = g_ascii_strtoull (equal + 1, NULL, 0);
          else if (i + 1 < argc)
            {
              argv[i++] = NULL;
              test_log_fd = g_ascii_strtoull (argv[i], NULL, 0);
            }
          argv[i] = NULL;
        }
      else if (strcmp ("--GTestSkipCount", argv[i]) == 0 || strncmp ("--GTestSkipCount=", argv[i], 17) == 0)
        {
          gchar *equal = argv[i] + 16;
          if (*equal == '=')
            test_startup_skip_count = g_ascii_strtoull (equal + 1, NULL, 0);
          else if (i + 1 < argc)
            {
              argv[i++] = NULL;
              test_startup_skip_count = g_ascii_strtoull (argv[i], NULL, 0);
            }
          argv[i] = NULL;
        }
      else if (strcmp ("--GTestSubprocess", argv[i]) == 0)
        {
          test_in_subprocess = TRUE;
          /* We typically expect these child processes to crash, and some
           * tests spawn a *lot* of them.  Avoid spamming system crash
           * collection programs such as systemd-coredump and abrt.
           */
#ifdef HAVE_SYS_RESOURCE_H
          {
            struct rlimit limit = { 0, 0 };
            (void) setrlimit (RLIMIT_CORE, &limit);
          }
#endif
          argv[i] = NULL;
        }
      else if (strcmp ("-p", argv[i]) == 0 || strncmp ("-p=", argv[i], 3) == 0)
        {
          gchar *equal = argv[i] + 2;
          if (*equal == '=')
            test_paths = g_slist_prepend (test_paths, equal + 1);
          else if (i + 1 < argc)
            {
              argv[i++] = NULL;
              test_paths = g_slist_prepend (test_paths, argv[i]);
            }
          argv[i] = NULL;
        }
      else if (strcmp ("-s", argv[i]) == 0 || strncmp ("-s=", argv[i], 3) == 0)
        {
          gchar *equal = argv[i] + 2;
          if (*equal == '=')
            test_paths_skipped = g_slist_prepend (test_paths_skipped, equal + 1);
          else if (i + 1 < argc)
            {
              argv[i++] = NULL;
              test_paths_skipped = g_slist_prepend (test_paths_skipped, argv[i]);
            }
          argv[i] = NULL;
        }
      else if (strcmp ("-m", argv[i]) == 0 || strncmp ("-m=", argv[i], 3) == 0)
        {
          gchar *equal = argv[i] + 2;
          const gchar *mode = "";
          if (*equal == '=')
            mode = equal + 1;
          else if (i + 1 < argc)
            {
              argv[i++] = NULL;
              mode = argv[i];
            }
          if (strcmp (mode, "perf") == 0)
            mutable_test_config_vars.test_perf = TRUE;
          else if (strcmp (mode, "slow") == 0)
            mutable_test_config_vars.test_quick = FALSE;
          else if (strcmp (mode, "thorough") == 0)
            mutable_test_config_vars.test_quick = FALSE;
          else if (strcmp (mode, "quick") == 0)
            {
              mutable_test_config_vars.test_quick = TRUE;
              mutable_test_config_vars.test_perf = FALSE;
            }
          else if (strcmp (mode, "undefined") == 0)
            mutable_test_config_vars.test_undefined = TRUE;
          else if (strcmp (mode, "no-undefined") == 0)
            mutable_test_config_vars.test_undefined = FALSE;
          else
            g_error ("unknown test mode: -m %s", mode);
          argv[i] = NULL;
        }
      else if (strcmp ("-q", argv[i]) == 0 || strcmp ("--quiet", argv[i]) == 0)
        {
          mutable_test_config_vars.test_quiet = TRUE;
          mutable_test_config_vars.test_verbose = FALSE;
          argv[i] = NULL;
        }
      else if (strcmp ("--verbose", argv[i]) == 0)
        {
          mutable_test_config_vars.test_quiet = FALSE;
          mutable_test_config_vars.test_verbose = TRUE;
          argv[i] = NULL;
        }
      else if (strcmp ("-l", argv[i]) == 0)
        {
          test_run_list = TRUE;
          argv[i] = NULL;
        }
      else if (strcmp ("--seed", argv[i]) == 0 || strncmp ("--seed=", argv[i], 7) == 0)
        {
          gchar *equal = argv[i] + 6;
          if (*equal == '=')
            test_run_seedstr = equal + 1;
          else if (i + 1 < argc)
            {
              argv[i++] = NULL;
              test_run_seedstr = argv[i];
            }
          argv[i] = NULL;
        }
      else if (strcmp ("-?", argv[i]) == 0 ||
               strcmp ("-h", argv[i]) == 0 ||
               strcmp ("--help", argv[i]) == 0)
        {
          printf ("Usage:\n"
                  "  %s [OPTION...]\n\n"
                  "Help Options:\n"
                  "  -h, --help                     Show help options\n\n"
                  "Test Options:\n"
                  "  --g-fatal-warnings             Make all warnings fatal\n"
                  "  -l                             List test cases available in a test executable\n"
                  "  -m {perf|slow|thorough|quick}  Execute tests according to mode\n"
                  "  -m {undefined|no-undefined}    Execute tests according to mode\n"
                  "  -p TESTPATH                    Only start test cases matching TESTPATH\n"
                  "  -s TESTPATH                    Skip all tests matching TESTPATH\n"
                  "  -seed=SEEDSTRING               Start tests with random seed SEEDSTRING\n"
                  "  --debug-log                    debug test logging output\n"
                  "  -q, --quiet                    Run tests quietly\n"
                  "  --verbose                      Run tests verbosely\n",
                  argv[0]);
          exit (0);
        }
    }
  /* collapse argv */
  e = 1;
  for (i = 1; i < argc; i++)
    if (argv[i])
      {
        argv[e++] = argv[i];
        if (i >= e)
          argv[i] = NULL;
      }
  *argc_p = e;
}

/**
 * g_test_init:
 * @argc: Address of the @argc parameter of the main() function.
 *        Changed if any arguments were handled.
 * @argv: Address of the @argv parameter of main().
 *        Any parameters understood by g_test_init() stripped before return.
 * @...: %NULL-terminated list of special options. Currently the only
 *       defined option is `"no_g_set_prgname"`, which
 *       will cause g_test_init() to not call g_set_prgname().
 *
 * Initialize the GLib testing framework, e.g. by seeding the
 * test random number generator, the name for g_get_prgname()
 * and parsing test related command line args.
 *
 * So far, the following arguments are understood:
 *
 * - `-l`: List test cases available in a test executable.
 * - `--seed=SEED`: Provide a random seed to reproduce test
 *   runs using random numbers.
 * - `--verbose`: Run tests verbosely.
 * - `-q`, `--quiet`: Run tests quietly.
 * - `-p PATH`: Execute all tests matching the given path.
 *   This can also be used to force a test to run that would otherwise
 *   be skipped (ie, a test whose name contains "/subprocess").
 * - `-m {perf|slow|thorough|quick|undefined|no-undefined}`: Execute tests according to these test modes:
 *
 *   `perf`: Performance tests, may take long and report results.
 *
 *   `slow`, `thorough`: Slow and thorough tests, may take quite long and maximize coverage.
 *
 *   `quick`: Quick tests, should run really quickly and give good coverage.
 *
 *   `undefined`: Tests for undefined behaviour, may provoke programming errors
 *   under g_test_trap_subprocess() or g_test_expect_messages() to check
 *   that appropriate assertions or warnings are given
 *
 *   `no-undefined`: Avoid tests for undefined behaviour
 *
 * - `--debug-log`: Debug test logging output.
 *
 * Since: 2.16
 */
void
g_test_init (int    *argc,
             char ***argv,
             ...)
{
  static char seedstr[4 + 4 * 8 + 1];
  va_list args;
  gpointer option;
  /* make warnings and criticals fatal for all test programs */
  GLogLevelFlags fatal_mask = (GLogLevelFlags) g_log_set_always_fatal ((GLogLevelFlags) G_LOG_FATAL_MASK);

  fatal_mask = (GLogLevelFlags) (fatal_mask | G_LOG_LEVEL_WARNING | G_LOG_LEVEL_CRITICAL);
  g_log_set_always_fatal (fatal_mask);
  /* check caller args */
  g_return_if_fail (argc != NULL);
  g_return_if_fail (argv != NULL);
  g_return_if_fail (g_test_config_vars->test_initialized == FALSE);
  mutable_test_config_vars.test_initialized = TRUE;

  va_start (args, argv);
  while ((option = va_arg (args, char *)))
    {
      if (g_strcmp0 (option, "no_g_set_prgname") == 0)
        no_g_set_prgname = TRUE;
    }
  va_end (args);

  /* setup random seed string */
  g_snprintf (seedstr, sizeof (seedstr), "R02S%08x%08x%08x%08x", g_random_int(), g_random_int(), g_random_int(), g_random_int());
  test_run_seedstr = seedstr;

  /* parse args, sets up mode, changes seed, etc. */
  parse_args (argc, argv);

  if (!g_get_prgname() && !no_g_set_prgname)
    g_set_prgname ((*argv)[0]);

  /* verify GRand reliability, needed for reliable seeds */
  if (1)
    {
      GRand *rg = g_rand_new_with_seed (0xc8c49fb6);
      guint32 t1 = g_rand_int (rg), t2 = g_rand_int (rg), t3 = g_rand_int (rg), t4 = g_rand_int (rg);
      /* g_print ("GRand-current: 0x%x 0x%x 0x%x 0x%x\n", t1, t2, t3, t4); */
      if (t1 != 0xfab39f9b || t2 != 0xb948fb0e || t3 != 0x3d31be26 || t4 != 0x43a19d66)
        g_warning ("random numbers are not GRand-2.2 compatible, seeds may be broken (check $G_RANDOM_VERSION)");
      g_rand_free (rg);
    }

  /* check rand seed */
  test_run_seed (test_run_seedstr);

  /* report program start */
  g_log_set_default_handler (gtest_default_log_handler, NULL);
  g_test_log (G_TEST_LOG_START_BINARY, g_get_prgname(), test_run_seedstr, 0, NULL);

  test_argv0_dirname = g_path_get_dirname (test_argv0);

  /* Make sure we get the real dirname that the test was run from */
  if (g_str_has_suffix (test_argv0_dirname, "/.libs"))
    {
      gchar *tmp;
      tmp = g_path_get_dirname (test_argv0_dirname);
      g_free (test_argv0_dirname);
      test_argv0_dirname = tmp;
    }

  test_disted_files_dir = g_getenv ("G_TEST_SRCDIR");
  if (!test_disted_files_dir)
    test_disted_files_dir = test_argv0_dirname;

  test_built_files_dir = g_getenv ("G_TEST_BUILDDIR");
  if (!test_built_files_dir)
    test_built_files_dir = test_argv0_dirname;
}

static void
test_run_seed (const gchar *rseed)
{
  guint seed_failed = 0;
  if (test_run_rand)
    g_rand_free (test_run_rand);
  test_run_rand = NULL;
  while (strchr (" \t\v\r\n\f", *rseed))
    rseed++;
  if (strncmp (rseed, "R02S", 4) == 0)  /* seed for random generator 02 (GRand-2.2) */
    {
      const char *s = rseed + 4;
      if (strlen (s) >= 32)             /* require 4 * 8 chars */
        {
          guint32 seedarray[4];
          gchar *p, hexbuf[9] = { 0, };
          memcpy (hexbuf, s + 0, 8);
          seedarray[0] = g_ascii_strtoull (hexbuf, &p, 16);
          seed_failed += p != NULL && *p != 0;
          memcpy (hexbuf, s + 8, 8);
          seedarray[1] = g_ascii_strtoull (hexbuf, &p, 16);
          seed_failed += p != NULL && *p != 0;
          memcpy (hexbuf, s + 16, 8);
          seedarray[2] = g_ascii_strtoull (hexbuf, &p, 16);
          seed_failed += p != NULL && *p != 0;
          memcpy (hexbuf, s + 24, 8);
          seedarray[3] = g_ascii_strtoull (hexbuf, &p, 16);
          seed_failed += p != NULL && *p != 0;
          if (!seed_failed)
            {
              test_run_rand = g_rand_new_with_seed_array (seedarray, 4);
              return;
            }
        }
    }
  g_error ("Unknown or invalid random seed: %s", rseed);
}

/**
 * g_test_rand_int:
 *
 * Get a reproducible random integer number.
 *
 * The random numbers generated by the g_test_rand_*() family of functions
 * change with every new test program start, unless the --seed option is
 * given when starting test programs.
 *
 * For individual test cases however, the random number generator is
 * reseeded, to avoid dependencies between tests and to make --seed
 * effective for all test cases.
 *
 * Returns: a random number from the seeded random number generator.
 *
 * Since: 2.16
 */
gint32
g_test_rand_int (void)
{
  return g_rand_int (test_run_rand);
}

/**
 * g_test_rand_int_range:
 * @begin: the minimum value returned by this function
 * @end:   the smallest value not to be returned by this function
 *
 * Get a reproducible random integer number out of a specified range,
 * see g_test_rand_int() for details on test case random numbers.
 *
 * Returns: a number with @begin <= number < @end.
 * 
 * Since: 2.16
 */
gint32
g_test_rand_int_range (gint32          begin,
                       gint32          end)
{
  return g_rand_int_range (test_run_rand, begin, end);
}

/**
 * g_test_rand_double:
 *
 * Get a reproducible random floating point number,
 * see g_test_rand_int() for details on test case random numbers.
 *
 * Returns: a random number from the seeded random number generator.
 *
 * Since: 2.16
 */
double
g_test_rand_double (void)
{
  return g_rand_double (test_run_rand);
}

/**
 * g_test_rand_double_range:
 * @range_start: the minimum value returned by this function
 * @range_end: the minimum value not returned by this function
 *
 * Get a reproducible random floating pointer number out of a specified range,
 * see g_test_rand_int() for details on test case random numbers.
 *
 * Returns: a number with @range_start <= number < @range_end.
 *
 * Since: 2.16
 */
double
g_test_rand_double_range (double          range_start,
                          double          range_end)
{
  return g_rand_double_range (test_run_rand, range_start, range_end);
}

/**
 * g_test_timer_start:
 *
 * Start a timing test. Call g_test_timer_elapsed() when the task is supposed
 * to be done. Call this function again to restart the timer.
 *
 * Since: 2.16
 */
void
g_test_timer_start (void)
{
  if (!test_user_timer)
    test_user_timer = g_timer_new();
  test_user_stamp = 0;
  g_timer_start (test_user_timer);
}

/**
 * g_test_timer_elapsed:
 *
 * Get the time since the last start of the timer with g_test_timer_start().
 *
 * Returns: the time since the last start of the timer, as a double
 *
 * Since: 2.16
 */
double
g_test_timer_elapsed (void)
{
  test_user_stamp = test_user_timer ? g_timer_elapsed (test_user_timer, NULL) : 0;
  return test_user_stamp;
}

/**
 * g_test_timer_last:
 *
 * Report the last result of g_test_timer_elapsed().
 *
 * Returns: the last result of g_test_timer_elapsed(), as a double
 *
 * Since: 2.16
 */
double
g_test_timer_last (void)
{
  return test_user_stamp;
}

/**
 * g_test_minimized_result:
 * @minimized_quantity: the reported value
 * @format: the format string of the report message
 * @...: arguments to pass to the printf() function
 *
 * Report the result of a performance or measurement test.
 * The test should generally strive to minimize the reported
 * quantities (smaller values are better than larger ones),
 * this and @minimized_quantity can determine sorting
 * order for test result reports.
 *
 * Since: 2.16
 */
void
g_test_minimized_result (double          minimized_quantity,
                         const char     *format,
                         ...)
{
  long double largs = minimized_quantity;
  gchar *buffer;
  va_list args;

  va_start (args, format);
  buffer = g_strdup_vprintf (format, args);
  va_end (args);

  g_test_log (G_TEST_LOG_MIN_RESULT, buffer, NULL, 1, &largs);
  g_free (buffer);
}

/**
 * g_test_maximized_result:
 * @maximized_quantity: the reported value
 * @format: the format string of the report message
 * @...: arguments to pass to the printf() function
 *
 * Report the result of a performance or measurement test.
 * The test should generally strive to maximize the reported
 * quantities (larger values are better than smaller ones),
 * this and @maximized_quantity can determine sorting
 * order for test result reports.
 *
 * Since: 2.16
 */
void
g_test_maximized_result (double          maximized_quantity,
                         const char     *format,
                         ...)
{
  long double largs = maximized_quantity;
  gchar *buffer;
  va_list args;

  va_start (args, format);
  buffer = g_strdup_vprintf (format, args);
  va_end (args);

  g_test_log (G_TEST_LOG_MAX_RESULT, buffer, NULL, 1, &largs);
  g_free (buffer);
}

/**
 * g_test_message:
 * @format: the format string
 * @...:    printf-like arguments to @format
 *
 * Add a message to the test report.
 *
 * Since: 2.16
 */
void
g_test_message (const char *format,
                ...)
{
  gchar *buffer;
  va_list args;

  va_start (args, format);
  buffer = g_strdup_vprintf (format, args);
  va_end (args);

  g_test_log (G_TEST_LOG_MESSAGE, buffer, NULL, 0, NULL);
  g_free (buffer);
}

/**
 * g_test_bug_base:
 * @uri_pattern: the base pattern for bug URIs
 *
 * Specify the base URI for bug reports.
 *
 * The base URI is used to construct bug report messages for
 * g_test_message() when g_test_bug() is called.
 * Calling this function outside of a test case sets the
 * default base URI for all test cases. Calling it from within
 * a test case changes the base URI for the scope of the test
 * case only.
 * Bug URIs are constructed by appending a bug specific URI
 * portion to @uri_pattern, or by replacing the special string
 * '\%s' within @uri_pattern if that is present.
 *
 * Since: 2.16
 */
void
g_test_bug_base (const char *uri_pattern)
{
  g_free (test_uri_base);
  test_uri_base = g_strdup (uri_pattern);
}

/**
 * g_test_bug:
 * @bug_uri_snippet: Bug specific bug tracker URI portion.
 *
 * This function adds a message to test reports that
 * associates a bug URI with a test case.
 * Bug URIs are constructed from a base URI set with g_test_bug_base()
 * and @bug_uri_snippet.
 *
 * Since: 2.16
 */
void
g_test_bug (const char *bug_uri_snippet)
{
  char *c;

  g_return_if_fail (test_uri_base != NULL);
  g_return_if_fail (bug_uri_snippet != NULL);

  c = strstr (test_uri_base, "%s");
  if (c)
    {
      char *b = g_strndup (test_uri_base, c - test_uri_base);
      char *s = g_strconcat (b, bug_uri_snippet, c + 2, NULL);
      g_free (b);
      g_test_message ("Bug Reference: %s", s);
      g_free (s);
    }
  else
    g_test_message ("Bug Reference: %s%s", test_uri_base, bug_uri_snippet);
}

/**
 * g_test_get_root:
 *
 * Get the toplevel test suite for the test path API.
 *
 * Returns: the toplevel #GTestSuite
 *
 * Since: 2.16
 */
GTestSuite*
g_test_get_root (void)
{
  if (!test_suite_root)
    {
      test_suite_root = g_test_create_suite ("root");
      g_free (test_suite_root->name);
      test_suite_root->name = g_strdup ("");
    }

  return test_suite_root;
}

/**
 * g_test_run:
 *
 * Runs all tests under the toplevel suite which can be retrieved
 * with g_test_get_root(). Similar to g_test_run_suite(), the test
 * cases to be run are filtered according to test path arguments
 * (`-p testpath`) as parsed by g_test_init(). g_test_run_suite()
 * or g_test_run() may only be called once in a program.
 *
 * In general, the tests and sub-suites within each suite are run in
 * the order in which they are defined. However, note that prior to
 * GLib 2.36, there was a bug in the `g_test_add_*`
 * functions which caused them to create multiple suites with the same
 * name, meaning that if you created tests "/foo/simple",
 * "/bar/simple", and "/foo/using-bar" in that order, they would get
 * run in that order (since g_test_run() would run the first "/foo"
 * suite, then the "/bar" suite, then the second "/foo" suite). As of
 * 2.36, this bug is fixed, and adding the tests in that order would
 * result in a running order of "/foo/simple", "/foo/using-bar",
 * "/bar/simple". If this new ordering is sub-optimal (because it puts
 * more-complicated tests before simpler ones, making it harder to
 * figure out exactly what has failed), you can fix it by changing the
 * test paths to group tests by suite in a way that will result in the
 * desired running order. Eg, "/simple/foo", "/simple/bar",
 * "/complex/foo-using-bar".
 *
 * However, you should never make the actual result of a test depend
 * on the order that tests are run in. If you need to ensure that some
 * particular code runs before or after a given test case, use
 * g_test_add(), which lets you specify setup and teardown functions.
 *
 * If all tests are skipped, this function will return 0 if
 * producing TAP output, or 77 (treated as "skip test" by Automake) otherwise.
 *
 * Returns: 0 on success, 1 on failure (assuming it returns at all),
 *   0 or 77 if all tests were skipped with g_test_skip()
 *
 * Since: 2.16
 */
int
g_test_run (void)
{
  if (g_test_run_suite (g_test_get_root()) != 0)
    return 1;

  /* 77 is special to Automake's default driver, but not Automake's TAP driver
   * or Perl's prove(1) TAP driver. */
  if (test_tap_log)
    return 0;

  if (test_run_count > 0 && test_run_count == test_skipped_count)
    return 77;
  else
    return 0;
}

/**
 * g_test_create_case:
 * @test_name:     the name for the test case
 * @data_size:     the size of the fixture data structure
 * @test_data:     test data argument for the test functions
 * @data_setup:    the function to set up the fixture data
 * @data_test:     the actual test function
 * @data_teardown: the function to teardown the fixture data
 *
 * Create a new #GTestCase, named @test_name, this API is fairly
 * low level, calling g_test_add() or g_test_add_func() is preferable.
 * When this test is executed, a fixture structure of size @data_size
 * will be allocated and filled with 0s. Then @data_setup is called
 * to initialize the fixture. After fixture setup, the actual test
 * function @data_test is called. Once the test run completed, the
 * fixture structure is torn down  by calling @data_teardown and
 * after that the memory is released.
 *
 * Splitting up a test run into fixture setup, test function and
 * fixture teardown is most usful if the same fixture is used for
 * multiple tests. In this cases, g_test_create_case() will be
 * called with the same fixture, but varying @test_name and
 * @data_test arguments.
 *
 * Returns: a newly allocated #GTestCase.
 *
 * Since: 2.16
 */
GTestCase*
g_test_create_case (const char       *test_name,
                    gsize             data_size,
                    gconstpointer     test_data,
                    GTestFixtureFunc  data_setup,
                    GTestFixtureFunc  data_test,
                    GTestFixtureFunc  data_teardown)
{
  GTestCase *tc;

  g_return_val_if_fail (test_name != NULL, NULL);
  g_return_val_if_fail (strchr (test_name, '/') == NULL, NULL);
  g_return_val_if_fail (test_name[0] != 0, NULL);
  g_return_val_if_fail (data_test != NULL, NULL);

  tc = g_slice_new0 (GTestCase);
  tc->name = g_strdup (test_name);
  tc->test_data = (gpointer) test_data;
  tc->fixture_size = data_size;
  tc->fixture_setup = (void*) data_setup;
  tc->fixture_test = (void*) data_test;
  tc->fixture_teardown = (void*) data_teardown;

  return tc;
}

static gint
find_suite (gconstpointer l, gconstpointer s)
{
  const GTestSuite *suite = l;
  const gchar *str = s;

  return strcmp (suite->name, str);
}

/**
 * GTestFixtureFunc:
 * @fixture: the test fixture
 * @user_data: the data provided when registering the test
 *
 * The type used for functions that operate on test fixtures.  This is
 * used for the fixture setup and teardown functions as well as for the
 * testcases themselves.
 *
 * @user_data is a pointer to the data that was given when registering
 * the test case.
 *
 * @fixture will be a pointer to the area of memory allocated by the
 * test framework, of the size requested.  If the requested size was
 * zero then @fixture will be equal to @user_data.
 *
 * Since: 2.28
 */
void
g_test_add_vtable (const char       *testpath,
                   gsize             data_size,
                   gconstpointer     test_data,
                   GTestFixtureFunc  data_setup,
                   GTestFixtureFunc  fixture_test_func,
                   GTestFixtureFunc  data_teardown)
{
  gchar **segments;
  guint ui;
  GTestSuite *suite;

  g_return_if_fail (testpath != NULL);
  g_return_if_fail (g_path_is_absolute (testpath));
  g_return_if_fail (fixture_test_func != NULL);

  if (g_slist_find_custom (test_paths_skipped, testpath, (GCompareFunc)g_strcmp0))
    return;

  suite = g_test_get_root();
  segments = g_strsplit (testpath, "/", -1);
  for (ui = 0; segments[ui] != NULL; ui++)
    {
      const char *seg = segments[ui];
      gboolean islast = segments[ui + 1] == NULL;
      if (islast && !seg[0])
        g_error ("invalid test case path: %s", testpath);
      else if (!seg[0])
        continue;       /* initial or duplicate slash */
      else if (!islast)
        {
          GSList *l;
          GTestSuite *csuite;
          l = g_slist_find_custom (suite->suites, seg, find_suite);
          if (l)
            {
              csuite = l->data;
            }
          else
            {
              csuite = g_test_create_suite (seg);
              g_test_suite_add_suite (suite, csuite);
            }
          suite = csuite;
        }
      else /* islast */
        {
          GTestCase *tc = g_test_create_case (seg, data_size, test_data, data_setup, fixture_test_func, data_teardown);
          g_test_suite_add (suite, tc);
        }
    }
  g_strfreev (segments);
}

/**
 * g_test_fail:
 *
 * Indicates that a test failed. This function can be called
 * multiple times from the same test. You can use this function
 * if your test failed in a recoverable way.
 * 
 * Do not use this function if the failure of a test could cause
 * other tests to malfunction.
 *
 * Calling this function will not stop the test from running, you
 * need to return from the test function yourself. So you can
 * produce additional diagnostic messages or even continue running
 * the test.
 *
 * If not called from inside a test, this function does nothing.
 *
 * Since: 2.30
 **/
void
g_test_fail (void)
{
  test_run_success = G_TEST_RUN_FAILURE;
}

/**
 * g_test_incomplete:
 * @msg: (allow-none): explanation
 *
 * Indicates that a test failed because of some incomplete
 * functionality. This function can be called multiple times
 * from the same test.
 *
 * Calling this function will not stop the test from running, you
 * need to return from the test function yourself. So you can
 * produce additional diagnostic messages or even continue running
 * the test.
 *
 * If not called from inside a test, this function does nothing.
 *
 * Since: 2.38
 */
void
g_test_incomplete (const gchar *msg)
{
  test_run_success = G_TEST_RUN_INCOMPLETE;
  g_free (test_run_msg);
  test_run_msg = g_strdup (msg);
}

/**
 * g_test_skip:
 * @msg: (allow-none): explanation
 *
 * Indicates that a test was skipped.
 *
 * Calling this function will not stop the test from running, you
 * need to return from the test function yourself. So you can
 * produce additional diagnostic messages or even continue running
 * the test.
 *
 * If not called from inside a test, this function does nothing.
 *
 * Since: 2.38
 */
void
g_test_skip (const gchar *msg)
{
  test_run_success = G_TEST_RUN_SKIPPED;
  g_free (test_run_msg);
  test_run_msg = g_strdup (msg);
}

/**
 * g_test_failed:
 *
 * Returns whether a test has already failed. This will
 * be the case when g_test_fail(), g_test_incomplete()
 * or g_test_skip() have been called, but also if an
 * assertion has failed.
 *
 * This can be useful to return early from a test if
 * continuing after a failed assertion might be harmful.
 *
 * The return value of this function is only meaningful
 * if it is called from inside a test function.
 *
 * Returns: %TRUE if the test has failed
 *
 * Since: 2.38
 */
gboolean
g_test_failed (void)
{
  return test_run_success != G_TEST_RUN_SUCCESS;
}

/**
 * g_test_set_nonfatal_assertions:
 *
 * Changes the behaviour of g_assert_cmpstr(), g_assert_cmpint(),
 * g_assert_cmpuint(), g_assert_cmphex(), g_assert_cmpfloat(),
 * g_assert_true(), g_assert_false(), g_assert_null(), g_assert_no_error(),
 * g_assert_error(), g_test_assert_expected_messages() and the various
 * g_test_trap_assert_*() macros to not abort to program, but instead
 * call g_test_fail() and continue. (This also changes the behavior of
 * g_test_fail() so that it will not cause the test program to abort
 * after completing the failed test.)
 *
 * Note that the g_assert_not_reached() and g_assert() are not
 * affected by this.
 *
 * This function can only be called after g_test_init().
 *
 * Since: 2.38
 */
void
g_test_set_nonfatal_assertions (void)
{
  if (!g_test_config_vars->test_initialized)
    g_error ("g_test_set_nonfatal_assertions called without g_test_init");
  test_nonfatal_assertions = TRUE;
  test_mode_fatal = FALSE;
}

/**
 * GTestFunc:
 *
 * The type used for test case functions.
 *
 * Since: 2.28
 */

/**
 * g_test_add_func:
 * @testpath:   /-separated test case path name for the test.
 * @test_func:  The test function to invoke for this test.
 *
 * Create a new test case, similar to g_test_create_case(). However
 * the test is assumed to use no fixture, and test suites are automatically
 * created on the fly and added to the root fixture, based on the
 * slash-separated portions of @testpath.
 *
 * If @testpath includes the component "subprocess" anywhere in it,
 * the test will be skipped by default, and only run if explicitly
 * required via the `-p` command-line option or g_test_trap_subprocess().
 *
 * Since: 2.16
 */
void
g_test_add_func (const char *testpath,
                 GTestFunc   test_func)
{
  g_return_if_fail (testpath != NULL);
  g_return_if_fail (testpath[0] == '/');
  g_return_if_fail (test_func != NULL);
  g_test_add_vtable (testpath, 0, NULL, NULL, (GTestFixtureFunc) test_func, NULL);
}

/**
 * GTestDataFunc:
 * @user_data: the data provided when registering the test
 *
 * The type used for test case functions that take an extra pointer
 * argument.
 *
 * Since: 2.28
 */

/**
 * g_test_add_data_func:
 * @testpath:   /-separated test case path name for the test.
 * @test_data:  Test data argument for the test function.
 * @test_func:  The test function to invoke for this test.
 *
 * Create a new test case, similar to g_test_create_case(). However
 * the test is assumed to use no fixture, and test suites are automatically
 * created on the fly and added to the root fixture, based on the
 * slash-separated portions of @testpath. The @test_data argument
 * will be passed as first argument to @test_func.
 *
 * If @testpath includes the component "subprocess" anywhere in it,
 * the test will be skipped by default, and only run if explicitly
 * required via the `-p` command-line option or g_test_trap_subprocess().
 *
 * Since: 2.16
 */
void
g_test_add_data_func (const char     *testpath,
                      gconstpointer   test_data,
                      GTestDataFunc   test_func)
{
  g_return_if_fail (testpath != NULL);
  g_return_if_fail (testpath[0] == '/');
  g_return_if_fail (test_func != NULL);

  g_test_add_vtable (testpath, 0, test_data, NULL, (GTestFixtureFunc) test_func, NULL);
}

/**
 * g_test_add_data_func_full:
 * @testpath: /-separated test case path name for the test.
 * @test_data: Test data argument for the test function.
 * @test_func: The test function to invoke for this test.
 * @data_free_func: #GDestroyNotify for @test_data.
 *
 * Create a new test case, as with g_test_add_data_func(), but freeing
 * @test_data after the test run is complete.
 *
 * Since: 2.34
 */
void
g_test_add_data_func_full (const char     *testpath,
                           gpointer        test_data,
                           GTestDataFunc   test_func,
                           GDestroyNotify  data_free_func)
{
  g_return_if_fail (testpath != NULL);
  g_return_if_fail (testpath[0] == '/');
  g_return_if_fail (test_func != NULL);

  g_test_add_vtable (testpath, 0, test_data, NULL,
                     (GTestFixtureFunc) test_func,
                     (GTestFixtureFunc) data_free_func);
}

static gboolean
g_test_suite_case_exists (GTestSuite *suite,
                          const char *test_path)
{
  GSList *iter;
  char *slash;
  GTestCase *tc;

  test_path++;
  slash = strchr (test_path, '/');

  if (slash)
    {
      for (iter = suite->suites; iter; iter = iter->next)
        {
          GTestSuite *child_suite = iter->data;

          if (!strncmp (child_suite->name, test_path, slash - test_path))
            if (g_test_suite_case_exists (child_suite, slash))
              return TRUE;
        }
    }
  else
    {
      for (iter = suite->cases; iter; iter = iter->next)
        {
          tc = iter->data;
          if (!strcmp (tc->name, test_path))
            return TRUE;
        }
    }

  return FALSE;
}

/**
 * g_test_create_suite:
 * @suite_name: a name for the suite
 *
 * Create a new test suite with the name @suite_name.
 *
 * Returns: A newly allocated #GTestSuite instance.
 *
 * Since: 2.16
 */
GTestSuite*
g_test_create_suite (const char *suite_name)
{
  GTestSuite *ts;
  g_return_val_if_fail (suite_name != NULL, NULL);
  g_return_val_if_fail (strchr (suite_name, '/') == NULL, NULL);
  g_return_val_if_fail (suite_name[0] != 0, NULL);
  ts = g_slice_new0 (GTestSuite);
  ts->name = g_strdup (suite_name);
  return ts;
}

/**
 * g_test_suite_add:
 * @suite: a #GTestSuite
 * @test_case: a #GTestCase
 *
 * Adds @test_case to @suite.
 *
 * Since: 2.16
 */
void
g_test_suite_add (GTestSuite     *suite,
                  GTestCase      *test_case)
{
  g_return_if_fail (suite != NULL);
  g_return_if_fail (test_case != NULL);

  suite->cases = g_slist_prepend (suite->cases, test_case);
}

/**
 * g_test_suite_add_suite:
 * @suite:       a #GTestSuite
 * @nestedsuite: another #GTestSuite
 *
 * Adds @nestedsuite to @suite.
 *
 * Since: 2.16
 */
void
g_test_suite_add_suite (GTestSuite     *suite,
                        GTestSuite     *nestedsuite)
{
  g_return_if_fail (suite != NULL);
  g_return_if_fail (nestedsuite != NULL);

  suite->suites = g_slist_prepend (suite->suites, nestedsuite);
}

/**
 * g_test_queue_free:
 * @gfree_pointer: the pointer to be stored.
 *
 * Enqueue a pointer to be released with g_free() during the next
 * teardown phase. This is equivalent to calling g_test_queue_destroy()
 * with a destroy callback of g_free().
 *
 * Since: 2.16
 */
void
g_test_queue_free (gpointer gfree_pointer)
{
  if (gfree_pointer)
    g_test_queue_destroy (g_free, gfree_pointer);
}

/**
 * g_test_queue_destroy:
 * @destroy_func:       Destroy callback for teardown phase.
 * @destroy_data:       Destroy callback data.
 *
 * This function enqueus a callback @destroy_func to be executed
 * during the next test case teardown phase. This is most useful
 * to auto destruct allocted test resources at the end of a test run.
 * Resources are released in reverse queue order, that means enqueueing
 * callback A before callback B will cause B() to be called before
 * A() during teardown.
 *
 * Since: 2.16
 */
void
g_test_queue_destroy (GDestroyNotify destroy_func,
                      gpointer       destroy_data)
{
  DestroyEntry *dentry;

  g_return_if_fail (destroy_func != NULL);

  dentry = g_slice_new0 (DestroyEntry);
  dentry->destroy_func = destroy_func;
  dentry->destroy_data = destroy_data;
  dentry->next = test_destroy_queue;
  test_destroy_queue = dentry;
}

static gboolean
test_case_run (GTestCase *tc)
{
  gchar *old_name = test_run_name, *old_base = g_strdup (test_uri_base);
  GSList **old_free_list, *filename_free_list = NULL;
  gboolean success = G_TEST_RUN_SUCCESS;

  old_free_list = test_filename_free_list;
  test_filename_free_list = &filename_free_list;

  test_run_name = g_strconcat (old_name, "/", tc->name, NULL);
  if (strstr (test_run_name, "/subprocess"))
    {
      GSList *iter;
      gboolean found = FALSE;

      for (iter = test_paths; iter; iter = iter->next)
        {
          if (!strcmp (test_run_name, iter->data))
            {
              found = TRUE;
              break;
            }
        }

      if (!found)
        {
          if (g_test_verbose ())
            g_print ("GTest: skipping: %s\n", test_run_name);
          goto out;
        }
    }

  if (++test_run_count <= test_startup_skip_count)
    g_test_log (G_TEST_LOG_SKIP_CASE, test_run_name, NULL, 0, NULL);
  else if (test_run_list)
    {
      g_print ("%s\n", test_run_name);
      g_test_log (G_TEST_LOG_LIST_CASE, test_run_name, NULL, 0, NULL);
    }
  else
    {
      GTimer *test_run_timer = g_timer_new();
      long double largs[3];
      void *fixture;
      g_test_log (G_TEST_LOG_START_CASE, test_run_name, NULL, 0, NULL);
      test_run_forks = 0;
      test_run_success = G_TEST_RUN_SUCCESS;
      g_clear_pointer (&test_run_msg, g_free);
      g_test_log_set_fatal_handler (NULL, NULL);
      g_timer_start (test_run_timer);
      fixture = tc->fixture_size ? g_malloc0 (tc->fixture_size) : tc->test_data;
      test_run_seed (test_run_seedstr);
      if (tc->fixture_setup)
        tc->fixture_setup (fixture, tc->test_data);
      tc->fixture_test (fixture, tc->test_data);
      test_trap_clear();
      while (test_destroy_queue)
        {
          DestroyEntry *dentry = test_destroy_queue;
          test_destroy_queue = dentry->next;
          dentry->destroy_func (dentry->destroy_data);
          g_slice_free (DestroyEntry, dentry);
        }
      if (tc->fixture_teardown)
        tc->fixture_teardown (fixture, tc->test_data);
      if (tc->fixture_size)
        g_free (fixture);
      g_timer_stop (test_run_timer);
      success = test_run_success;
      test_run_success = G_TEST_RUN_FAILURE;
      largs[0] = success; /* OK */
      largs[1] = test_run_forks;
      largs[2] = g_timer_elapsed (test_run_timer, NULL);
      g_test_log (G_TEST_LOG_STOP_CASE, test_run_name, test_run_msg, G_N_ELEMENTS (largs), largs);
      g_clear_pointer (&test_run_msg, g_free);
      g_timer_destroy (test_run_timer);
    }

 out:
  g_slist_free_full (filename_free_list, g_free);
  test_filename_free_list = old_free_list;
  g_free (test_run_name);
  test_run_name = old_name;
  g_free (test_uri_base);
  test_uri_base = old_base;

  return (success == G_TEST_RUN_SUCCESS ||
          success == G_TEST_RUN_SKIPPED);
}

static int
g_test_run_suite_internal (GTestSuite *suite,
                           const char *path)
{
  guint n_bad = 0, l;
  gchar *rest, *old_name = test_run_name;
  GSList *slist, *reversed;

  g_return_val_if_fail (suite != NULL, -1);

  g_test_log (G_TEST_LOG_START_SUITE, suite->name, NULL, 0, NULL);

  while (path[0] == '/')
    path++;
  l = strlen (path);
  rest = strchr (path, '/');
  l = rest ? MIN (l, rest - path) : l;
  test_run_name = suite->name[0] == 0 ? g_strdup (test_run_name) : g_strconcat (old_name, "/", suite->name, NULL);
  reversed = g_slist_reverse (g_slist_copy (suite->cases));
  for (slist = reversed; slist; slist = slist->next)
    {
      GTestCase *tc = slist->data;
      guint n = l ? strlen (tc->name) : 0;
      if (l == n && !rest && strncmp (path, tc->name, n) == 0)
        {
          if (!test_case_run (tc))
            n_bad++;
        }
    }
  g_slist_free (reversed);
  reversed = g_slist_reverse (g_slist_copy (suite->suites));
  for (slist = reversed; slist; slist = slist->next)
    {
      GTestSuite *ts = slist->data;
      guint n = l ? strlen (ts->name) : 0;
      if (l == n && strncmp (path, ts->name, n) == 0)
        n_bad += g_test_run_suite_internal (ts, rest ? rest : "");
    }
  g_slist_free (reversed);
  g_free (test_run_name);
  test_run_name = old_name;

  g_test_log (G_TEST_LOG_STOP_SUITE, suite->name, NULL, 0, NULL);

  return n_bad;
}

/**
 * g_test_run_suite:
 * @suite: a #GTestSuite
 *
 * Execute the tests within @suite and all nested #GTestSuites.
 * The test suites to be executed are filtered according to
 * test path arguments (`-p testpath`) as parsed by g_test_init().
 * See the g_test_run() documentation for more information on the
 * order that tests are run in.
 *
 * g_test_run_suite() or g_test_run() may only be called once
 * in a program.
 *
 * Returns: 0 on success
 *
 * Since: 2.16
 */
int
g_test_run_suite (GTestSuite *suite)
{
  GSList *my_test_paths;
  guint n_bad = 0;

  g_return_val_if_fail (g_test_config_vars->test_initialized, -1);
  g_return_val_if_fail (g_test_run_once == TRUE, -1);

  g_test_run_once = FALSE;

  if (test_paths)
    my_test_paths = g_slist_copy (test_paths);
  else
    my_test_paths = g_slist_prepend (NULL, "");

  while (my_test_paths)
    {
      const char *rest, *path = my_test_paths->data;
      guint l, n = strlen (suite->name);
      my_test_paths = g_slist_delete_link (my_test_paths, my_test_paths);
      while (path[0] == '/')
        path++;
      if (!n) /* root suite, run unconditionally */
        {
          n_bad += g_test_run_suite_internal (suite, path);
          continue;
        }
      /* regular suite, match path */
      rest = strchr (path, '/');
      l = strlen (path);
      l = rest ? MIN (l, rest - path) : l;
      if ((!l || l == n) && strncmp (path, suite->name, n) == 0)
        n_bad += g_test_run_suite_internal (suite, rest ? rest : "");
    }

  return n_bad;
}

static void
gtest_default_log_handler (const gchar    *log_domain,
                           GLogLevelFlags  log_level,
                           const gchar    *message,
                           gpointer        unused_data)
{
  const gchar *strv[16];
  gboolean fatal = FALSE;
  gchar *msg;
  guint i = 0;

  if (log_domain)
    {
      strv[i++] = log_domain;
      strv[i++] = "-";
    }
  if (log_level & G_LOG_FLAG_FATAL)
    {
      strv[i++] = "FATAL-";
      fatal = TRUE;
    }
  if (log_level & G_LOG_FLAG_RECURSION)
    strv[i++] = "RECURSIVE-";
  if (log_level & G_LOG_LEVEL_ERROR)
    strv[i++] = "ERROR";
  if (log_level & G_LOG_LEVEL_CRITICAL)
    strv[i++] = "CRITICAL";
  if (log_level & G_LOG_LEVEL_WARNING)
    strv[i++] = "WARNING";
  if (log_level & G_LOG_LEVEL_MESSAGE)
    strv[i++] = "MESSAGE";
  if (log_level & G_LOG_LEVEL_INFO)
    strv[i++] = "INFO";
  if (log_level & G_LOG_LEVEL_DEBUG)
    strv[i++] = "DEBUG";
  strv[i++] = ": ";
  strv[i++] = message;
  strv[i++] = NULL;

  msg = g_strjoinv ("", (gchar**) strv);
  g_test_log (fatal ? G_TEST_LOG_ERROR : G_TEST_LOG_MESSAGE, msg, NULL, 0, NULL);
  g_log_default_handler (log_domain, log_level, message, unused_data);

  g_free (msg);
}

void
g_assertion_message (const char     *domain,
                     const char     *file,
                     int             line,
                     const char     *func,
                     const char     *message)
{
  char lstr[32];
  char *s;

  if (!message)
    message = "code should not be reached";
  g_snprintf (lstr, 32, "%d", line);
  s = g_strconcat (domain ? domain : "", domain && domain[0] ? ":" : "",
                   "ERROR:", file, ":", lstr, ":",
                   func, func[0] ? ":" : "",
                   " ", message, NULL);
  g_printerr ("**\n%s\n", s);

  g_test_log (G_TEST_LOG_ERROR, s, NULL, 0, NULL);

  if (test_nonfatal_assertions)
    {
      g_free (s);
      g_test_fail ();
      return;
    }

  /* store assertion message in global variable, so that it can be found in a
   * core dump */
  if (__glib_assert_msg != NULL)
    /* free the old one */
    free (__glib_assert_msg);
  __glib_assert_msg = (char*) malloc (strlen (s) + 1);
  strcpy (__glib_assert_msg, s);

  g_free (s);

  if (test_in_subprocess)
    {
      /* If this is a test case subprocess then it probably hit this
       * assertion on purpose, so just exit() rather than abort()ing,
       * to avoid triggering any system crash-reporting daemon.
       */
      _exit (1);
    }
  else
    abort ();
}

void
g_assertion_message_expr (const char     *domain,
                          const char     *file,
                          int             line,
                          const char     *func,
                          const char     *expr)
{
  char *s;
  if (!expr)
    s = g_strdup ("code should not be reached");
  else
    s = g_strconcat ("assertion failed: (", expr, ")", NULL);
  g_assertion_message (domain, file, line, func, s);
  g_free (s);

  /* Normally g_assertion_message() won't return, but we need this for
   * when test_nonfatal_assertions is set, since
   * g_assertion_message_expr() is used for always-fatal assertions.
   */
  if (test_in_subprocess)
    _exit (1);
  else
    abort ();
}

void
g_assertion_message_cmpnum (const char     *domain,
                            const char     *file,
                            int             line,
                            const char     *func,
                            const char     *expr,
                            long double     arg1,
                            const char     *cmp,
                            long double     arg2,
                            char            numtype)
{
  char *s = NULL;

  switch (numtype)
    {
    case 'i':   s = g_strdup_printf ("assertion failed (%s): (%" G_GINT64_MODIFIER "i %s %" G_GINT64_MODIFIER "i)", expr, (gint64) arg1, cmp, (gint64) arg2); break;
    case 'x':   s = g_strdup_printf ("assertion failed (%s): (0x%08" G_GINT64_MODIFIER "x %s 0x%08" G_GINT64_MODIFIER "x)", expr, (guint64) arg1, cmp, (guint64) arg2); break;
    case 'f':   s = g_strdup_printf ("assertion failed (%s): (%.9g %s %.9g)", expr, (double) arg1, cmp, (double) arg2); break;
      /* ideally use: floats=%.7g double=%.17g */
    }
  g_assertion_message (domain, file, line, func, s);
  g_free (s);
}

void
g_assertion_message_cmpstr (const char     *domain,
                            const char     *file,
                            int             line,
                            const char     *func,
                            const char     *expr,
                            const char     *arg1,
                            const char     *cmp,
                            const char     *arg2)
{
  char *a1, *a2, *s, *t1 = NULL, *t2 = NULL;
  a1 = arg1 ? g_strconcat ("\"", t1 = g_strescape (arg1, NULL), "\"", NULL) : g_strdup ("NULL");
  a2 = arg2 ? g_strconcat ("\"", t2 = g_strescape (arg2, NULL), "\"", NULL) : g_strdup ("NULL");
  g_free (t1);
  g_free (t2);
  s = g_strdup_printf ("assertion failed (%s): (%s %s %s)", expr, a1, cmp, a2);
  g_free (a1);
  g_free (a2);
  g_assertion_message (domain, file, line, func, s);
  g_free (s);
}

void
g_assertion_message_error (const char     *domain,
			   const char     *file,
			   int             line,
			   const char     *func,
			   const char     *expr,
			   const GError   *error,
			   GQuark          error_domain,
			   int             error_code)
{
  GString *gstring;

  /* This is used by both g_assert_error() and g_assert_no_error(), so there
   * are three cases: expected an error but got the wrong error, expected
   * an error but got no error, and expected no error but got an error.
   */

  gstring = g_string_new ("assertion failed ");
  if (error_domain)
      g_string_append_printf (gstring, "(%s == (%s, %d)): ", expr,
			      g_quark_to_string (error_domain), error_code);
  else
    g_string_append_printf (gstring, "(%s == NULL): ", expr);

  if (error)
      g_string_append_printf (gstring, "%s (%s, %d)", error->message,
			      g_quark_to_string (error->domain), error->code);
  else
    g_string_append_printf (gstring, "%s is NULL", expr);

  g_assertion_message (domain, file, line, func, gstring->str);
  g_string_free (gstring, TRUE);
}

/**
 * g_strcmp0:
 * @str1: (allow-none): a C string or %NULL
 * @str2: (allow-none): another C string or %NULL
 *
 * Compares @str1 and @str2 like strcmp(). Handles %NULL
 * gracefully by sorting it before non-%NULL strings.
 * Comparing two %NULL pointers returns 0.
 *
 * Returns: an integer less than, equal to, or greater than zero, if @str1 is <, == or > than @str2.
 *
 * Since: 2.16
 */
int
g_strcmp0 (const char     *str1,
           const char     *str2)
{
  if (!str1)
    return -(str1 != str2);
  if (!str2)
    return str1 != str2;
  return strcmp (str1, str2);
}

static void
test_trap_clear (void)
{
  test_trap_last_status = 0;
  test_trap_last_pid = 0;
  g_clear_pointer (&test_trap_last_subprocess, g_free);
  g_clear_pointer (&test_trap_last_stdout, g_free);
  g_clear_pointer (&test_trap_last_stderr, g_free);
}

#ifdef G_OS_UNIX

static int
sane_dup2 (int fd1,
           int fd2)
{
  int ret;
  do
    ret = dup2 (fd1, fd2);
  while (ret < 0 && errno == EINTR);
  return ret;
}

#endif

typedef struct {
  GPid pid;
  GMainLoop *loop;
  int child_status;

  GIOChannel *stdout_io;
  gboolean echo_stdout;
  GString *stdout_str;

  GIOChannel *stderr_io;
  gboolean echo_stderr;
  GString *stderr_str;
} WaitForChildData;

static void
check_complete (WaitForChildData *data)
{
  if (data->child_status != -1 && data->stdout_io == NULL && data->stderr_io == NULL)
    g_main_loop_quit (data->loop);
}

static void
child_exited (GPid     pid,
              gint     status,
              gpointer user_data)
{
  WaitForChildData *data = user_data;

#ifdef G_OS_UNIX
  if (WIFEXITED (status)) /* normal exit */
    data->child_status = WEXITSTATUS (status); /* 0..255 */
  else if (WIFSIGNALED (status) && WTERMSIG (status) == SIGALRM)
    data->child_status = G_TEST_STATUS_TIMED_OUT;
  else if (WIFSIGNALED (status))
    data->child_status = (WTERMSIG (status) << 12); /* signalled */
  else /* WCOREDUMP (status) */
    data->child_status = 512; /* coredump */
#else
  data->child_status = status;
#endif

  check_complete (data);
}

static gboolean
child_timeout (gpointer user_data)
{
  WaitForChildData *data = user_data;

#ifdef G_OS_WIN32
  TerminateProcess (data->pid, G_TEST_STATUS_TIMED_OUT);
#else
  kill (data->pid, SIGALRM);
#endif

  return FALSE;
}

static gboolean
child_read (GIOChannel *io, GIOCondition cond, gpointer user_data)
{
  WaitForChildData *data = user_data;
  GIOStatus status;
  gsize nread, nwrote, total;
  gchar buf[4096];
  FILE *echo_file = NULL;

  status = g_io_channel_read_chars (io, buf, sizeof (buf), &nread, NULL);
  if (status == G_IO_STATUS_ERROR || status == G_IO_STATUS_EOF)
    {
      // FIXME data->error = (status == G_IO_STATUS_ERROR);
      if (io == data->stdout_io)
        g_clear_pointer (&data->stdout_io, g_io_channel_unref);
      else
        g_clear_pointer (&data->stderr_io, g_io_channel_unref);

      check_complete (data);
      return FALSE;
    }
  else if (status == G_IO_STATUS_AGAIN)
    return TRUE;

  if (io == data->stdout_io)
    {
      g_string_append_len (data->stdout_str, buf, nread);
      if (data->echo_stdout)
        echo_file = stdout;
    }
  else
    {
      g_string_append_len (data->stderr_str, buf, nread);
      if (data->echo_stderr)
        echo_file = stderr;
    }

  if (echo_file)
    {
      for (total = 0; total < nread; total += nwrote)
        {
          nwrote = fwrite (buf + total, 1, nread - total, echo_file);
          if (nwrote == 0)
            g_error ("write failed: %s", g_strerror (errno));
        }
    }

  return TRUE;
}

static void
wait_for_child (GPid pid,
                int stdout_fd, gboolean echo_stdout,
                int stderr_fd, gboolean echo_stderr,
                guint64 timeout)
{
  WaitForChildData data;
  GMainContext *context;
  GSource *source;

  data.pid = pid;
  data.child_status = -1;

  context = g_main_context_new ();
  data.loop = g_main_loop_new (context, FALSE);

  source = g_child_watch_source_new (pid);
  g_source_set_callback (source, (GSourceFunc) child_exited, &data, NULL);
  g_source_attach (source, context);
  g_source_unref (source);

  data.echo_stdout = echo_stdout;
  data.stdout_str = g_string_new (NULL);
  data.stdout_io = g_io_channel_unix_new (stdout_fd);
  g_io_channel_set_close_on_unref (data.stdout_io, TRUE);
  g_io_channel_set_encoding (data.stdout_io, NULL, NULL);
  g_io_channel_set_buffered (data.stdout_io, FALSE);
  source = g_io_create_watch (data.stdout_io, G_IO_IN | G_IO_ERR | G_IO_HUP);
  g_source_set_callback (source, (GSourceFunc) child_read, &data, NULL);
  g_source_attach (source, context);
  g_source_unref (source);

  data.echo_stderr = echo_stderr;
  data.stderr_str = g_string_new (NULL);
  data.stderr_io = g_io_channel_unix_new (stderr_fd);
  g_io_channel_set_close_on_unref (data.stderr_io, TRUE);
  g_io_channel_set_encoding (data.stderr_io, NULL, NULL);
  g_io_channel_set_buffered (data.stderr_io, FALSE);
  source = g_io_create_watch (data.stderr_io, G_IO_IN | G_IO_ERR | G_IO_HUP);
  g_source_set_callback (source, (GSourceFunc) child_read, &data, NULL);
  g_source_attach (source, context);
  g_source_unref (source);

  if (timeout)
    {
      source = g_timeout_source_new (0);
      g_source_set_ready_time (source, g_get_monotonic_time () + timeout);
      g_source_set_callback (source, (GSourceFunc) child_timeout, &data, NULL);
      g_source_attach (source, context);
      g_source_unref (source);
    }

  g_main_loop_run (data.loop);
  g_main_loop_unref (data.loop);
  g_main_context_unref (context);

  test_trap_last_pid = pid;
  test_trap_last_status = data.child_status;
  test_trap_last_stdout = g_string_free (data.stdout_str, FALSE);
  test_trap_last_stderr = g_string_free (data.stderr_str, FALSE);

  g_clear_pointer (&data.stdout_io, g_io_channel_unref);
  g_clear_pointer (&data.stderr_io, g_io_channel_unref);
}

/**
 * g_test_trap_fork:
 * @usec_timeout:    Timeout for the forked test in micro seconds.
 * @test_trap_flags: Flags to modify forking behaviour.
 *
 * Fork the current test program to execute a test case that might
 * not return or that might abort.
 *
 * If @usec_timeout is non-0, the forked test case is aborted and
 * considered failing if its run time exceeds it.
 *
 * The forking behavior can be configured with the #GTestTrapFlags flags.
 *
 * In the following example, the test code forks, the forked child
 * process produces some sample output and exits successfully.
 * The forking parent process then asserts successful child program
 * termination and validates child program outputs.
 *
 * |[<!-- language="C" --> 
 *   static void
 *   test_fork_patterns (void)
 *   {
 *     if (g_test_trap_fork (0, G_TEST_TRAP_SILENCE_STDOUT | G_TEST_TRAP_SILENCE_STDERR))
 *       {
 *         g_print ("some stdout text: somagic17\n");
 *         g_printerr ("some stderr text: semagic43\n");
 *         exit (0); // successful test run
 *       }
 *     g_test_trap_assert_passed ();
 *     g_test_trap_assert_stdout ("*somagic17*");
 *     g_test_trap_assert_stderr ("*semagic43*");
 *   }
 * ]|
 *
 * Returns: %TRUE for the forked child and %FALSE for the executing parent process.
 *
 * Since: 2.16
 *
 * Deprecated: This function is implemented only on Unix platforms,
 * and is not always reliable due to problems inherent in
 * fork-without-exec. Use g_test_trap_subprocess() instead.
 */
gboolean
g_test_trap_fork (guint64        usec_timeout,
                  GTestTrapFlags test_trap_flags)
{
#ifdef G_OS_UNIX
  int stdout_pipe[2] = { -1, -1 };
  int stderr_pipe[2] = { -1, -1 };

  test_trap_clear();
  if (pipe (stdout_pipe) < 0 || pipe (stderr_pipe) < 0)
    g_error ("failed to create pipes to fork test program: %s", g_strerror (errno));
  test_trap_last_pid = fork ();
  if (test_trap_last_pid < 0)
    g_error ("failed to fork test program: %s", g_strerror (errno));
  if (test_trap_last_pid == 0)  /* child */
    {
      int fd0 = -1;
      close (stdout_pipe[0]);
      close (stderr_pipe[0]);
      if (!(test_trap_flags & G_TEST_TRAP_INHERIT_STDIN))
        {
          fd0 = g_open ("/dev/null", O_RDONLY, 0);
          if (fd0 < 0)
            g_error ("failed to open /dev/null for stdin redirection");
        }
      if (sane_dup2 (stdout_pipe[1], 1) < 0 || sane_dup2 (stderr_pipe[1], 2) < 0 || (fd0 >= 0 && sane_dup2 (fd0, 0) < 0))
        g_error ("failed to dup2() in forked test program: %s", g_strerror (errno));
      if (fd0 >= 3)
        close (fd0);
      if (stdout_pipe[1] >= 3)
        close (stdout_pipe[1]);
      if (stderr_pipe[1] >= 3)
        close (stderr_pipe[1]);
      return TRUE;
    }
  else                          /* parent */
    {
      test_run_forks++;
      close (stdout_pipe[1]);
      close (stderr_pipe[1]);

      wait_for_child (test_trap_last_pid,
                      stdout_pipe[0], !(test_trap_flags & G_TEST_TRAP_SILENCE_STDOUT),
                      stderr_pipe[0], !(test_trap_flags & G_TEST_TRAP_SILENCE_STDERR),
                      usec_timeout);
      return FALSE;
    }
#else
  g_message ("Not implemented: g_test_trap_fork");

  return FALSE;
#endif
}

/**
 * g_test_trap_subprocess:
 * @test_path: (allow-none): Test to run in a subprocess
 * @usec_timeout: Timeout for the subprocess test in micro seconds.
 * @test_flags:   Flags to modify subprocess behaviour.
 *
 * Respawns the test program to run only @test_path in a subprocess.
 * This can be used for a test case that might not return, or that
 * might abort.
 *
 * If @test_path is %NULL then the same test is re-run in a subprocess.
 * You can use g_test_subprocess() to determine whether the test is in
 * a subprocess or not.
 *
 * @test_path can also be the name of the parent test, followed by
 * "`/subprocess/`" and then a name for the specific subtest (or just
 * ending with "`/subprocess`" if the test only has one child test);
 * tests with names of this form will automatically be skipped in the
 * parent process.
 *
 * If @usec_timeout is non-0, the test subprocess is aborted and
 * considered failing if its run time exceeds it.
 *
 * The subprocess behavior can be configured with the
 * #GTestSubprocessFlags flags.
 *
 * You can use methods such as g_test_trap_assert_passed(),
 * g_test_trap_assert_failed(), and g_test_trap_assert_stderr() to
 * check the results of the subprocess. (But note that
 * g_test_trap_assert_stdout() and g_test_trap_assert_stderr()
 * cannot be used if @test_flags specifies that the child should
 * inherit the parent stdout/stderr.) 
 *
 * If your `main ()` needs to behave differently in
 * the subprocess, you can call g_test_subprocess() (after calling
 * g_test_init()) to see whether you are in a subprocess.
 *
 * The following example tests that calling
 * `my_object_new(1000000)` will abort with an error
 * message.
 *
 * |[<!-- language="C" --> 
 *   static void
 *   test_create_large_object_subprocess (void)
 *   {
 *     if (g_test_subprocess ())
 *       {
 *         my_object_new (1000000);
 *         return;
 *       }
 *
 *     // Reruns this same test in a subprocess
 *     g_test_trap_subprocess (NULL, 0, 0);
 *     g_test_trap_assert_failed ();
 *     g_test_trap_assert_stderr ("*ERROR*too large*");
 *   }
 *
 *   int
 *   main (int argc, char **argv)
 *   {
 *     g_test_init (&argc, &argv, NULL);
 *
 *     g_test_add_func ("/myobject/create_large_object",
 *                      test_create_large_object);
 *     return g_test_run ();
 *   }
 * ]|
 *
 * Since: 2.38
 */
void
g_test_trap_subprocess (const char           *test_path,
                        guint64               usec_timeout,
                        GTestSubprocessFlags  test_flags)
{
  GError *error = NULL;
  GPtrArray *argv;
  GSpawnFlags flags;
  int stdout_fd, stderr_fd;
  GPid pid;

  /* Sanity check that they used GTestSubprocessFlags, not GTestTrapFlags */
  g_assert ((test_flags & (G_TEST_TRAP_INHERIT_STDIN | G_TEST_TRAP_SILENCE_STDOUT | G_TEST_TRAP_SILENCE_STDERR)) == 0);

  if (test_path)
    {
      if (!g_test_suite_case_exists (g_test_get_root (), test_path))
        g_error ("g_test_trap_subprocess: test does not exist: %s", test_path);
    }
  else
    {
      test_path = test_run_name;
    }

  if (g_test_verbose ())
    g_print ("GTest: subprocess: %s\n", test_path);

  test_trap_clear ();
  test_trap_last_subprocess = g_strdup (test_path);

  argv = g_ptr_array_new ();
  g_ptr_array_add (argv, test_argv0);
  g_ptr_array_add (argv, "-q");
  g_ptr_array_add (argv, "-p");
  g_ptr_array_add (argv, (char *)test_path);
  g_ptr_array_add (argv, "--GTestSubprocess");
  if (test_log_fd != -1)
    {
      char log_fd_buf[128];

      g_ptr_array_add (argv, "--GTestLogFD");
      g_snprintf (log_fd_buf, sizeof (log_fd_buf), "%d", test_log_fd);
      g_ptr_array_add (argv, log_fd_buf);
    }
  g_ptr_array_add (argv, NULL);

  flags = G_SPAWN_DO_NOT_REAP_CHILD;
  if (test_flags & G_TEST_TRAP_INHERIT_STDIN)
    flags |= G_SPAWN_CHILD_INHERITS_STDIN;

  if (!g_spawn_async_with_pipes (test_initial_cwd,
                                 (char **)argv->pdata,
                                 NULL, flags,
                                 NULL, NULL,
                                 &pid, NULL, &stdout_fd, &stderr_fd,
                                 &error))
    {
      g_error ("g_test_trap_subprocess() failed: %s\n",
               error->message);
    }
  g_ptr_array_free (argv, TRUE);

  wait_for_child (pid,
                  stdout_fd, !!(test_flags & G_TEST_SUBPROCESS_INHERIT_STDOUT),
                  stderr_fd, !!(test_flags & G_TEST_SUBPROCESS_INHERIT_STDERR),
                  usec_timeout);
}

/**
 * g_test_subprocess:
 *
 * Returns %TRUE (after g_test_init() has been called) if the test
 * program is running under g_test_trap_subprocess().
 *
 * Returns: %TRUE if the test program is running under
 * g_test_trap_subprocess().
 *
 * Since: 2.38
 */
gboolean
g_test_subprocess (void)
{
  return test_in_subprocess;
}

/**
 * g_test_trap_has_passed:
 *
 * Check the result of the last g_test_trap_subprocess() call.
 *
 * Returns: %TRUE if the last test subprocess terminated successfully.
 *
 * Since: 2.16
 */
gboolean
g_test_trap_has_passed (void)
{
  return test_trap_last_status == 0; /* exit_status == 0 && !signal && !coredump */
}

/**
 * g_test_trap_reached_timeout:
 *
 * Check the result of the last g_test_trap_subprocess() call.
 *
 * Returns: %TRUE if the last test subprocess got killed due to a timeout.
 *
 * Since: 2.16
 */
gboolean
g_test_trap_reached_timeout (void)
{
  return test_trap_last_status == G_TEST_STATUS_TIMED_OUT;
}

void
g_test_trap_assertions (const char     *domain,
                        const char     *file,
                        int             line,
                        const char     *func,
                        guint64         assertion_flags, /* 0-pass, 1-fail, 2-outpattern, 4-errpattern */
                        const char     *pattern)
{
  gboolean must_pass = assertion_flags == 0;
  gboolean must_fail = assertion_flags == 1;
  gboolean match_result = 0 == (assertion_flags & 1);
  const char *stdout_pattern = (assertion_flags & 2) ? pattern : NULL;
  const char *stderr_pattern = (assertion_flags & 4) ? pattern : NULL;
  const char *match_error = match_result ? "failed to match" : "contains invalid match";
  char *process_id;

#ifdef G_OS_UNIX
  if (test_trap_last_subprocess != NULL)
    {
      process_id = g_strdup_printf ("%s [%d]", test_trap_last_subprocess,
                                    test_trap_last_pid);
    }
  else if (test_trap_last_pid != 0)
    process_id = g_strdup_printf ("%d", test_trap_last_pid);
#else
  if (test_trap_last_subprocess != NULL)
    process_id = g_strdup (test_trap_last_subprocess);
#endif
  else
    g_error ("g_test_trap_ assertion with no trapped test");

  if (must_pass && !g_test_trap_has_passed())
    {
      char *msg = g_strdup_printf ("child process (%s) failed unexpectedly", process_id);
      g_assertion_message (domain, file, line, func, msg);
      g_free (msg);
    }
  if (must_fail && g_test_trap_has_passed())
    {
      char *msg = g_strdup_printf ("child process (%s) did not fail as expected", process_id);
      g_assertion_message (domain, file, line, func, msg);
      g_free (msg);
    }
  if (stdout_pattern && match_result == !g_pattern_match_simple (stdout_pattern, test_trap_last_stdout))
    {
      char *msg = g_strdup_printf ("stdout of child process (%s) %s: %s", process_id, match_error, stdout_pattern);
      g_assertion_message (domain, file, line, func, msg);
      g_free (msg);
    }
  if (stderr_pattern && match_result == !g_pattern_match_simple (stderr_pattern, test_trap_last_stderr))
    {
      char *msg = g_strdup_printf ("stderr of child process (%s) %s: %s", process_id, match_error, stderr_pattern);
      g_assertion_message (domain, file, line, func, msg);
      g_free (msg);
    }
  g_free (process_id);
}

static void
gstring_overwrite_int (GString *gstring,
                       guint    pos,
                       guint32  vuint)
{
  vuint = g_htonl (vuint);
  g_string_overwrite_len (gstring, pos, (const gchar*) &vuint, 4);
}

static void
gstring_append_int (GString *gstring,
                    guint32  vuint)
{
  vuint = g_htonl (vuint);
  g_string_append_len (gstring, (const gchar*) &vuint, 4);
}

static void
gstring_append_double (GString *gstring,
                       double   vdouble)
{
  union { double vdouble; guint64 vuint64; } u;
  u.vdouble = vdouble;
  u.vuint64 = GUINT64_TO_BE (u.vuint64);
  g_string_append_len (gstring, (const gchar*) &u.vuint64, 8);
}

static guint8*
g_test_log_dump (GTestLogMsg *msg,
                 guint       *len)
{
  GString *gstring = g_string_sized_new (1024);
  guint ui;
  gstring_append_int (gstring, 0);              /* message length */
  gstring_append_int (gstring, msg->log_type);
  gstring_append_int (gstring, msg->n_strings);
  gstring_append_int (gstring, msg->n_nums);
  gstring_append_int (gstring, 0);      /* reserved */
  for (ui = 0; ui < msg->n_strings; ui++)
    {
      guint l = strlen (msg->strings[ui]);
      gstring_append_int (gstring, l);
      g_string_append_len (gstring, msg->strings[ui], l);
    }
  for (ui = 0; ui < msg->n_nums; ui++)
    gstring_append_double (gstring, msg->nums[ui]);
  *len = gstring->len;
  gstring_overwrite_int (gstring, 0, *len);     /* message length */
  return (guint8*) g_string_free (gstring, FALSE);
}

static inline long double
net_double (const gchar **ipointer)
{
  union { guint64 vuint64; double vdouble; } u;
  guint64 aligned_int64;
  memcpy (&aligned_int64, *ipointer, 8);
  *ipointer += 8;
  u.vuint64 = GUINT64_FROM_BE (aligned_int64);
  return u.vdouble;
}

static inline guint32
net_int (const gchar **ipointer)
{
  guint32 aligned_int;
  memcpy (&aligned_int, *ipointer, 4);
  *ipointer += 4;
  return g_ntohl (aligned_int);
}

static gboolean
g_test_log_extract (GTestLogBuffer *tbuffer)
{
  const gchar *p = tbuffer->data->str;
  GTestLogMsg msg;
  guint mlength;
  if (tbuffer->data->len < 4 * 5)
    return FALSE;
  mlength = net_int (&p);
  if (tbuffer->data->len < mlength)
    return FALSE;
  msg.log_type = net_int (&p);
  msg.n_strings = net_int (&p);
  msg.n_nums = net_int (&p);
  if (net_int (&p) == 0)
    {
      guint ui;
      msg.strings = g_new0 (gchar*, msg.n_strings + 1);
      msg.nums = g_new0 (long double, msg.n_nums);
      for (ui = 0; ui < msg.n_strings; ui++)
        {
          guint sl = net_int (&p);
          msg.strings[ui] = g_strndup (p, sl);
          p += sl;
        }
      for (ui = 0; ui < msg.n_nums; ui++)
        msg.nums[ui] = net_double (&p);
      if (p <= tbuffer->data->str + mlength)
        {
          g_string_erase (tbuffer->data, 0, mlength);
          tbuffer->msgs = g_slist_prepend (tbuffer->msgs, g_memdup (&msg, sizeof (msg)));
          return TRUE;
        }

      g_free (msg.nums);
      g_strfreev (msg.strings);
    }

  g_error ("corrupt log stream from test program");
  return FALSE;
}

/**
 * g_test_log_buffer_new:
 *
 * Internal function for gtester to decode test log messages, no ABI guarantees provided.
 */
GTestLogBuffer*
g_test_log_buffer_new (void)
{
  GTestLogBuffer *tb = g_new0 (GTestLogBuffer, 1);
  tb->data = g_string_sized_new (1024);
  return tb;
}

/**
 * g_test_log_buffer_free:
 *
 * Internal function for gtester to free test log messages, no ABI guarantees provided.
 */
void
g_test_log_buffer_free (GTestLogBuffer *tbuffer)
{
  g_return_if_fail (tbuffer != NULL);
  while (tbuffer->msgs)
    g_test_log_msg_free (g_test_log_buffer_pop (tbuffer));
  g_string_free (tbuffer->data, TRUE);
  g_free (tbuffer);
}

/**
 * g_test_log_buffer_push:
 *
 * Internal function for gtester to decode test log messages, no ABI guarantees provided.
 */
void
g_test_log_buffer_push (GTestLogBuffer *tbuffer,
                        guint           n_bytes,
                        const guint8   *bytes)
{
  g_return_if_fail (tbuffer != NULL);
  if (n_bytes)
    {
      gboolean more_messages;
      g_return_if_fail (bytes != NULL);
      g_string_append_len (tbuffer->data, (const gchar*) bytes, n_bytes);
      do
        more_messages = g_test_log_extract (tbuffer);
      while (more_messages);
    }
}

/**
 * g_test_log_buffer_pop:
 *
 * Internal function for gtester to retrieve test log messages, no ABI guarantees provided.
 */
GTestLogMsg*
g_test_log_buffer_pop (GTestLogBuffer *tbuffer)
{
  GTestLogMsg *msg = NULL;
  g_return_val_if_fail (tbuffer != NULL, NULL);
  if (tbuffer->msgs)
    {
      GSList *slist = g_slist_last (tbuffer->msgs);
      msg = slist->data;
      tbuffer->msgs = g_slist_delete_link (tbuffer->msgs, slist);
    }
  return msg;
}

/**
 * g_test_log_msg_free:
 *
 * Internal function for gtester to free test log messages, no ABI guarantees provided.
 */
void
g_test_log_msg_free (GTestLogMsg *tmsg)
{
  g_return_if_fail (tmsg != NULL);
  g_strfreev (tmsg->strings);
  g_free (tmsg->nums);
  g_free (tmsg);
}

static gchar *
g_test_build_filename_va (GTestFileType  file_type,
                          const gchar   *first_path,
                          va_list        ap)
{
  const gchar *pathv[16];
  gint num_path_segments;

  if (file_type == G_TEST_DIST)
    pathv[0] = test_disted_files_dir;
  else if (file_type == G_TEST_BUILT)
    pathv[0] = test_built_files_dir;
  else
    g_assert_not_reached ();

  pathv[1] = first_path;

  for (num_path_segments = 2; num_path_segments < G_N_ELEMENTS (pathv); num_path_segments++)
    {
      pathv[num_path_segments] = va_arg (ap, const char *);
      if (pathv[num_path_segments] == NULL)
        break;
    }

  g_assert_cmpint (num_path_segments, <, G_N_ELEMENTS (pathv));

  return g_build_filenamev ((gchar **) pathv);
}

/**
 * g_test_build_filename:
 * @file_type: the type of file (built vs. distributed)
 * @first_path: the first segment of the pathname
 * @...: %NULL-terminated additional path segments
 *
 * Creates the pathname to a data file that is required for a test.
 *
 * This function is conceptually similar to g_build_filename() except
 * that the first argument has been replaced with a #GTestFileType
 * argument.
 *
 * The data file should either have been distributed with the module
 * containing the test (%G_TEST_DIST) or built as part of the build
 * system of that module (%G_TEST_BUILT).
 *
 * In order for this function to work in srcdir != builddir situations,
 * the G_TEST_SRCDIR and G_TEST_BUILDDIR environment variables need to
 * have been defined.  As of 2.38, this is done by the glib.mk
 * included in GLib.  Please ensure that your copy is up to date before
 * using this function.
 *
 * In case neither variable is set, this function will fall back to
 * using the dirname portion of argv[0], possibly removing ".libs".
 * This allows for casual running of tests directly from the commandline
 * in the srcdir == builddir case and should also support running of
 * installed tests, assuming the data files have been installed in the
 * same relative path as the test binary.
 *
 * Returns: the path of the file, to be freed using g_free()
 *
 * Since: 2.38
 **/
/**
 * GTestFileType:
 * @G_TEST_DIST: a file that was included in the distribution tarball
 * @G_TEST_BUILT: a file that was built on the compiling machine
 *
 * The type of file to return the filename for, when used with
 * g_test_build_filename().
 *
 * These two options correspond rather directly to the 'dist' and
 * 'built' terminology that automake uses and are explicitly used to
 * distinguish between the 'srcdir' and 'builddir' being separate.  All
 * files in your project should either be dist (in the
 * `DIST_EXTRA` or `dist_schema_DATA`
 * sense, in which case they will always be in the srcdir) or built (in
 * the `BUILT_SOURCES` sense, in which case they will
 * always be in the builddir).
 *
 * Note: as a general rule of automake, files that are generated only as
 * part of the build-from-git process (but then are distributed with the
 * tarball) always go in srcdir (even if doing a srcdir != builddir
 * build from git) and are considered as distributed files.
 *
 * Since: 2.38
 **/
gchar *
g_test_build_filename (GTestFileType  file_type,
                       const gchar   *first_path,
                       ...)
{
  gchar *result;
  va_list ap;

  g_assert (g_test_initialized ());

  va_start (ap, first_path);
  result = g_test_build_filename_va (file_type, first_path, ap);
  va_end (ap);

  return result;
}

/**
 * g_test_get_dir:
 * @file_type: the type of file (built vs. distributed)
 *
 * Gets the pathname of the directory containing test files of the type
 * specified by @file_type.
 *
 * This is approximately the same as calling g_test_build_filename("."),
 * but you don't need to free the return value.
 *
 * Returns: the path of the directory, owned by GLib
 *
 * Since: 2.38
 **/
const gchar *
g_test_get_dir (GTestFileType file_type)
{
  g_assert (g_test_initialized ());

  if (file_type == G_TEST_DIST)
    return test_disted_files_dir;
  else if (file_type == G_TEST_BUILT)
    return test_built_files_dir;

  g_assert_not_reached ();
}

/**
 * g_test_get_filename:
 * @file_type: the type of file (built vs. distributed)
 * @first_path: the first segment of the pathname
 * @...: %NULL-terminated additional path segments
 *
 * Gets the pathname to a data file that is required for a test.
 *
 * This is the same as g_test_build_filename() with two differences.
 * The first difference is that must only use this function from within
 * a testcase function.  The second difference is that you need not free
 * the return value -- it will be automatically freed when the testcase
 * finishes running.
 *
 * It is safe to use this function from a thread inside of a testcase
 * but you must ensure that all such uses occur before the main testcase
 * function returns (ie: it is best to ensure that all threads have been
 * joined).
 *
 * Returns: the path, automatically freed at the end of the testcase
 *
 * Since: 2.38
 **/
const gchar *
g_test_get_filename (GTestFileType  file_type,
                     const gchar   *first_path,
                     ...)
{
  gchar *result;
  GSList *node;
  va_list ap;

  g_assert (g_test_initialized ());
  if (test_filename_free_list == NULL)
    g_error ("g_test_get_filename() can only be used within testcase functions");

  va_start (ap, first_path);
  result = g_test_build_filename_va (file_type, first_path, ap);
  va_end (ap);

  node = g_slist_prepend (NULL, result);
  do
    node->next = *test_filename_free_list;
  while (!g_atomic_pointer_compare_and_exchange (test_filename_free_list, node->next, node));

  return result;
}

/* --- macros docs START --- */
/**
 * g_test_add:
 * @testpath:  The test path for a new test case.
 * @Fixture:   The type of a fixture data structure.
 * @tdata:     Data argument for the test functions.
 * @fsetup:    The function to set up the fixture data.
 * @ftest:     The actual test function.
 * @fteardown: The function to tear down the fixture data.
 *
 * Hook up a new test case at @testpath, similar to g_test_add_func().
 * A fixture data structure with setup and teardown function may be provided
 * though, similar to g_test_create_case().
 * g_test_add() is implemented as a macro, so that the fsetup(), ftest() and
 * fteardown() callbacks can expect a @Fixture pointer as first argument in
 * a type safe manner.
 *
 * Since: 2.16
 **/
/* --- macros docs END --- */