/* SPDX-License-Identifier: BSD-2-Clause */
/*******************************************************************************
 * Copyright 2017-2018, Fraunhofer SIT sponsored by Infineon Technologies AG
 * All rights reserved.
 *******************************************************************************/

#ifdef HAVE_CONFIG_H
#include <config.h>
#endif

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <stdint.h>

#include <tss2_esys.h>

#include "test.h"
#include "esys_types.h"
#include "esys_iutil.h"

#define LOGMODULE test
#include "util/log.h"
#include "util/aux_util.h"

/** This test is intended to test the unseal operation for the ESYS command
 *  Unseal.
 *
 * We start by creating a primary key (Esys_CreatePrimary).
 * Based on the primary key a second key with a password and the to be sealed
 * data defined in the sensitive area will be created (Esys_Create).
 * This key will be loaded and the unseal command (Esys_Unseal) will be used
 * to retrieve the sealed data.
 *
 * Tested ESYS commands:
 *  - Esys_Create() (M)
 *  - Esys_CreatePrimary() (M)
 *  - Esys_FlushContext() (M)
 *  - Esys_Load() (M)
 *  - Esys_Unseal() (M)
 *
 * @param[in,out] esys_context The ESYS_CONTEXT.
 * @retval EXIT_FAILURE
 * @retval EXIT_SUCCESS
 */

int
test_esys_unseal_password_auth(ESYS_CONTEXT * esys_context)
{
    /*
     * 1. Create Primary
     */
    TSS2_RC r;
    ESYS_TR primaryHandle = ESYS_TR_NONE;
    ESYS_TR loadedKeyHandle = ESYS_TR_NONE;

    TPM2B_PUBLIC *outPublic = NULL;
    TPM2B_CREATION_DATA *creationData = NULL;
    TPM2B_DIGEST *creationHash = NULL;
    TPMT_TK_CREATION *creationTicket = NULL;
    TPM2B_PUBLIC *outPublic2 = NULL;
    TPM2B_PRIVATE *outPrivate2 = NULL;
    TPM2B_CREATION_DATA *creationData2 = NULL;
    TPM2B_DIGEST *creationHash2 = NULL;
    TPMT_TK_CREATION *creationTicket2 = NULL;
    TPM2B_SENSITIVE_DATA *outData = NULL;

    TPM2B_AUTH authValuePrimary = {
        .size = 5,
        .buffer = {1, 2, 3, 4, 5}
    };

    TPM2B_SENSITIVE_CREATE inSensitivePrimary = {
        .size = 0,
        .sensitive = {
            .userAuth = {
                .size = 0,
                .buffer = {0 },
            },
            .data = {
                .size = 0,
                .buffer = {0},
            },
        },
    };

    inSensitivePrimary.sensitive.userAuth = authValuePrimary;

    TPM2B_PUBLIC inPublic = {
        .size = 0,
        .publicArea = {
            .type = TPM2_ALG_RSA,
            .nameAlg = TPM2_ALG_SHA256,
            .objectAttributes = (TPMA_OBJECT_USERWITHAUTH |
                                 TPMA_OBJECT_RESTRICTED |
                                 TPMA_OBJECT_DECRYPT |
                                 TPMA_OBJECT_FIXEDTPM |
                                 TPMA_OBJECT_FIXEDPARENT |
                                 TPMA_OBJECT_SENSITIVEDATAORIGIN),
            .authPolicy = {
                .size = 0,
            },
            .parameters.rsaDetail = {
                .symmetric = {
                    .algorithm = TPM2_ALG_AES,
                    .keyBits.aes = 128,
                    .mode.aes = TPM2_ALG_CFB},
                .scheme = {
                    .scheme = TPM2_ALG_NULL
                },
                .keyBits = 2048,
                .exponent = 0,
            },
            .unique.rsa = {
                .size = 0,
                .buffer = {},
            },
        },
    };

    TPM2B_DATA outsideInfo = {
        .size = 0,
        .buffer = {},
    };

    TPML_PCR_SELECTION creationPCR = {
        .count = 0,
    };

    TPM2B_AUTH authValue = {
        .size = 0,
        .buffer = {}
    };

    r = Esys_TR_SetAuth(esys_context, ESYS_TR_RH_OWNER, &authValue);
    goto_if_error(r, "Error: TR_SetAuth", error);

    RSRC_NODE_T *primaryHandle_node;

    r = Esys_CreatePrimary(esys_context, ESYS_TR_RH_OWNER, ESYS_TR_PASSWORD,
                           ESYS_TR_NONE, ESYS_TR_NONE,
                           &inSensitivePrimary, &inPublic,
                           &outsideInfo, &creationPCR, &primaryHandle,
                           &outPublic, &creationData, &creationHash,
                           &creationTicket);
    goto_if_error(r, "Error esys create primary", error);

    r = esys_GetResourceObject(esys_context, primaryHandle,
                               &primaryHandle_node);
    goto_if_error(r, "Error Esys GetResourceObject", error);

    LOG_INFO("Created Primary with handle 0x%08x...",
             primaryHandle_node->rsrc.handle);

    r = Esys_TR_SetAuth(esys_context, primaryHandle, &authValuePrimary);
    goto_if_error(r, "Error: TR_SetAuth", error);

    /*
     * 2. Create second key with sealed data
     */

    TPM2B_AUTH authKey2 = {
        .size = 6,
        .buffer = {6, 7, 8, 9, 10, 11}
    };

    TPM2B_SENSITIVE_CREATE inSensitive2 = {
        .size = 0,
        .sensitive = {
            .userAuth = {
                .size = 0,
                .buffer = {0}
            },
            .data = {
                .size = 8,
                .buffer = {3,2,3,2,3,2,3,2}
            }
        }
    };

    inSensitive2.sensitive.userAuth = authKey2;

    TPM2B_PUBLIC inPublic2 = {
        .size = 0,
        .publicArea = {
            /* type = TPM2_ALG_RSA, */
            .type = TPM2_ALG_KEYEDHASH,
            .nameAlg = TPM2_ALG_SHA256,
            .objectAttributes = (
                TPMA_OBJECT_USERWITHAUTH |
                /* TPMA_OBJECT_RESTRICTED | */
                /* TPMA_OBJECT_DECRYPT | */
                TPMA_OBJECT_FIXEDTPM |
                TPMA_OBJECT_FIXEDPARENT
                /* TPMA_OBJECT_SENSITIVEDATAORIGIN */
            ),

            .authPolicy = {
                .size = 0,
            },
            /*
            .parameters.rsaDetail = {
                .symmetric = {
                    .algorithm = TPM2_ALG_AES,
                    .keyBits.aes = 128,
                    .mode.aes = TPM2_ALG_CFB
                },
                .scheme = {
                    .scheme = TPM2_ALG_NULL,
                },
                .keyBits = 2048,
                .exponent = 0
            },
            .unique.rsa = {
                .size = 0,
                .buffer = {}
                ,
            }
            */
            .parameters.keyedHashDetail = {
                .scheme = {
                    .scheme = TPM2_ALG_NULL,
                    .details = {
                        .hmac = {
                            .hashAlg = TPM2_ALG_SHA256
                        }
                    }
                }
            },
            .unique.keyedHash = {
                .size = 0,
                .buffer = {},
            },
        }
    };

    TPM2B_DATA outsideInfo2 = {
        .size = 0,
        .buffer = {}
        ,
    };

    TPML_PCR_SELECTION creationPCR2 = {
        .count = 0,
    };

    r = Esys_Create(esys_context,
                    primaryHandle,
                    ESYS_TR_PASSWORD, ESYS_TR_NONE, ESYS_TR_NONE,
                    &inSensitive2,
                    &inPublic2,
                    &outsideInfo2,
                    &creationPCR2,
                    &outPrivate2,
                    &outPublic2,
                    &creationData2, &creationHash2, &creationTicket2);

    goto_if_error(r, "Error esys create ", error);

    LOG_INFO("\nSecond key created.");

    /*
     * 3. Load second key
     */

    r = Esys_Load(esys_context,
                  primaryHandle,
                  ESYS_TR_PASSWORD,
                  ESYS_TR_NONE,
                  ESYS_TR_NONE, outPrivate2, outPublic2, &loadedKeyHandle);
    goto_if_error(r, "Error esys load ", error);

    LOG_INFO("\nSecond Key loaded.");

    r = Esys_TR_SetAuth(esys_context, loadedKeyHandle, &authKey2);
    goto_if_error(r, "Error esys TR_SetAuth ", error);

    /*
     * 4. Unseal key
     */

    r = Esys_Unseal(esys_context, loadedKeyHandle, ESYS_TR_PASSWORD,
        ESYS_TR_NONE, ESYS_TR_NONE, &outData);
    goto_if_error(r, "Error esys Unseal ", error);

    if(memcmp(&(outData->buffer), &(inSensitive2.sensitive.data.buffer),
        inSensitive2.sensitive.data.size)!=0){
        LOG_ERROR("Error: Unsealed Data is unequal.");
        goto error;
    }

    LOG_INFO("\nData successfully unsealed.");

    /*
     * 5. Flush Context
     */

    r = Esys_FlushContext(esys_context, primaryHandle);
    goto_if_error(r, "Error during FlushContext", error);

    primaryHandle = ESYS_TR_NONE;

    r = Esys_FlushContext(esys_context, loadedKeyHandle);
    goto_if_error(r, "Error during FlushContext", error);

    Esys_Free(outPublic);
    Esys_Free(creationData);
    Esys_Free(creationHash);
    Esys_Free(creationTicket);
    Esys_Free(outPublic2);
    Esys_Free(outPrivate2);
    Esys_Free(creationData2);
    Esys_Free(creationHash2);
    Esys_Free(creationTicket2);
    Esys_Free(outData);
    return EXIT_SUCCESS;

    error:

    if (loadedKeyHandle != ESYS_TR_NONE) {
        if (Esys_FlushContext(esys_context, loadedKeyHandle) != TSS2_RC_SUCCESS) {
            LOG_ERROR("Cleanup loadedKeyHandle failed.");
        }
    }

    if (primaryHandle != ESYS_TR_NONE) {
        if (Esys_FlushContext(esys_context, primaryHandle) != TSS2_RC_SUCCESS) {
            LOG_ERROR("Cleanup primaryHandle failed.");
        }
    }

    Esys_Free(outPublic);
    Esys_Free(creationData);
    Esys_Free(creationHash);
    Esys_Free(creationTicket);
    Esys_Free(outPublic2);
    Esys_Free(outPrivate2);
    Esys_Free(creationData2);
    Esys_Free(creationHash2);
    Esys_Free(creationTicket2);
    Esys_Free(outData);
    return EXIT_FAILURE;
}

int
test_invoke_esys(ESYS_CONTEXT * esys_context) {
    return test_esys_unseal_password_auth(esys_context);
}