//! This module provides constants which are specific to the implementation
//! of the `f32` floating point data type.
//!
//! *[See also the `f32` primitive type](../../std/primitive.f32.html).*
//!
//! Mathematically significant numbers are provided in the `consts` sub-module.
//!
//! Although using these constants won’t cause compilation warnings,
//! new code should use the associated constants directly on the primitive type.

#![stable(feature = "rust1", since = "1.0.0")]
#![allow(missing_docs)]

#[cfg(not(test))]
use crate::intrinsics;
#[cfg(not(test))]
use crate::sys::cmath;

#[stable(feature = "rust1", since = "1.0.0")]
pub use core::f32::consts;
#[stable(feature = "rust1", since = "1.0.0")]
pub use core::f32::{DIGITS, EPSILON, MANTISSA_DIGITS, RADIX};
#[stable(feature = "rust1", since = "1.0.0")]
pub use core::f32::{INFINITY, MAX_10_EXP, NAN, NEG_INFINITY};
#[stable(feature = "rust1", since = "1.0.0")]
pub use core::f32::{MAX, MIN, MIN_POSITIVE};
#[stable(feature = "rust1", since = "1.0.0")]
pub use core::f32::{MAX_EXP, MIN_10_EXP, MIN_EXP};

#[cfg(not(test))]
#[lang = "f32_runtime"]
impl f32 {
    /// Returns the largest integer less than or equal to a number.
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 3.7_f32;
    /// let g = 3.0_f32;
    /// let h = -3.7_f32;
    ///
    /// assert_eq!(f.floor(), 3.0);
    /// assert_eq!(g.floor(), 3.0);
    /// assert_eq!(h.floor(), -4.0);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn floor(self) -> f32 {
        unsafe { intrinsics::floorf32(self) }
    }

    /// Returns the smallest integer greater than or equal to a number.
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 3.01_f32;
    /// let g = 4.0_f32;
    ///
    /// assert_eq!(f.ceil(), 4.0);
    /// assert_eq!(g.ceil(), 4.0);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn ceil(self) -> f32 {
        unsafe { intrinsics::ceilf32(self) }
    }

    /// Returns the nearest integer to a number. Round half-way cases away from
    /// `0.0`.
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 3.3_f32;
    /// let g = -3.3_f32;
    ///
    /// assert_eq!(f.round(), 3.0);
    /// assert_eq!(g.round(), -3.0);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn round(self) -> f32 {
        unsafe { intrinsics::roundf32(self) }
    }

    /// Returns the integer part of a number.
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 3.7_f32;
    /// let g = 3.0_f32;
    /// let h = -3.7_f32;
    ///
    /// assert_eq!(f.trunc(), 3.0);
    /// assert_eq!(g.trunc(), 3.0);
    /// assert_eq!(h.trunc(), -3.0);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn trunc(self) -> f32 {
        unsafe { intrinsics::truncf32(self) }
    }

    /// Returns the fractional part of a number.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 3.6_f32;
    /// let y = -3.6_f32;
    /// let abs_difference_x = (x.fract() - 0.6).abs();
    /// let abs_difference_y = (y.fract() - (-0.6)).abs();
    ///
    /// assert!(abs_difference_x <= f32::EPSILON);
    /// assert!(abs_difference_y <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn fract(self) -> f32 {
        self - self.trunc()
    }

    /// Computes the absolute value of `self`. Returns `NAN` if the
    /// number is `NAN`.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 3.5_f32;
    /// let y = -3.5_f32;
    ///
    /// let abs_difference_x = (x.abs() - x).abs();
    /// let abs_difference_y = (y.abs() - (-y)).abs();
    ///
    /// assert!(abs_difference_x <= f32::EPSILON);
    /// assert!(abs_difference_y <= f32::EPSILON);
    ///
    /// assert!(f32::NAN.abs().is_nan());
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn abs(self) -> f32 {
        unsafe { intrinsics::fabsf32(self) }
    }

    /// Returns a number that represents the sign of `self`.
    ///
    /// - `1.0` if the number is positive, `+0.0` or `INFINITY`
    /// - `-1.0` if the number is negative, `-0.0` or `NEG_INFINITY`
    /// - `NAN` if the number is `NAN`
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 3.5_f32;
    ///
    /// assert_eq!(f.signum(), 1.0);
    /// assert_eq!(f32::NEG_INFINITY.signum(), -1.0);
    ///
    /// assert!(f32::NAN.signum().is_nan());
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn signum(self) -> f32 {
        if self.is_nan() { NAN } else { 1.0_f32.copysign(self) }
    }

    /// Returns a number composed of the magnitude of `self` and the sign of
    /// `sign`.
    ///
    /// Equal to `self` if the sign of `self` and `sign` are the same, otherwise
    /// equal to `-self`. If `self` is a `NAN`, then a `NAN` with the sign of
    /// `sign` is returned.
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 3.5_f32;
    ///
    /// assert_eq!(f.copysign(0.42), 3.5_f32);
    /// assert_eq!(f.copysign(-0.42), -3.5_f32);
    /// assert_eq!((-f).copysign(0.42), 3.5_f32);
    /// assert_eq!((-f).copysign(-0.42), -3.5_f32);
    ///
    /// assert!(f32::NAN.copysign(1.0).is_nan());
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[inline]
    #[stable(feature = "copysign", since = "1.35.0")]
    pub fn copysign(self, sign: f32) -> f32 {
        unsafe { intrinsics::copysignf32(self, sign) }
    }

    /// Fused multiply-add. Computes `(self * a) + b` with only one rounding
    /// error, yielding a more accurate result than an unfused multiply-add.
    ///
    /// Using `mul_add` can be more performant than an unfused multiply-add if
    /// the target architecture has a dedicated `fma` CPU instruction.
    ///
    /// # Examples
    ///
    /// ```
    /// let m = 10.0_f32;
    /// let x = 4.0_f32;
    /// let b = 60.0_f32;
    ///
    /// // 100.0
    /// let abs_difference = (m.mul_add(x, b) - ((m * x) + b)).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn mul_add(self, a: f32, b: f32) -> f32 {
        unsafe { intrinsics::fmaf32(self, a, b) }
    }

    /// Calculates Euclidean division, the matching method for `rem_euclid`.
    ///
    /// This computes the integer `n` such that
    /// `self = n * rhs + self.rem_euclid(rhs)`.
    /// In other words, the result is `self / rhs` rounded to the integer `n`
    /// such that `self >= n * rhs`.
    ///
    /// # Examples
    ///
    /// ```
    /// let a: f32 = 7.0;
    /// let b = 4.0;
    /// assert_eq!(a.div_euclid(b), 1.0); // 7.0 > 4.0 * 1.0
    /// assert_eq!((-a).div_euclid(b), -2.0); // -7.0 >= 4.0 * -2.0
    /// assert_eq!(a.div_euclid(-b), -1.0); // 7.0 >= -4.0 * -1.0
    /// assert_eq!((-a).div_euclid(-b), 2.0); // -7.0 >= -4.0 * 2.0
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[inline]
    #[stable(feature = "euclidean_division", since = "1.38.0")]
    pub fn div_euclid(self, rhs: f32) -> f32 {
        let q = (self / rhs).trunc();
        if self % rhs < 0.0 {
            return if rhs > 0.0 { q - 1.0 } else { q + 1.0 };
        }
        q
    }

    /// Calculates the least nonnegative remainder of `self (mod rhs)`.
    ///
    /// In particular, the return value `r` satisfies `0.0 <= r < rhs.abs()` in
    /// most cases. However, due to a floating point round-off error it can
    /// result in `r == rhs.abs()`, violating the mathematical definition, if
    /// `self` is much smaller than `rhs.abs()` in magnitude and `self < 0.0`.
    /// This result is not an element of the function's codomain, but it is the
    /// closest floating point number in the real numbers and thus fulfills the
    /// property `self == self.div_euclid(rhs) * rhs + self.rem_euclid(rhs)`
    /// approximatively.
    ///
    /// # Examples
    ///
    /// ```
    /// let a: f32 = 7.0;
    /// let b = 4.0;
    /// assert_eq!(a.rem_euclid(b), 3.0);
    /// assert_eq!((-a).rem_euclid(b), 1.0);
    /// assert_eq!(a.rem_euclid(-b), 3.0);
    /// assert_eq!((-a).rem_euclid(-b), 1.0);
    /// // limitation due to round-off error
    /// assert!((-f32::EPSILON).rem_euclid(3.0) != 0.0);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[inline]
    #[stable(feature = "euclidean_division", since = "1.38.0")]
    pub fn rem_euclid(self, rhs: f32) -> f32 {
        let r = self % rhs;
        if r < 0.0 { r + rhs.abs() } else { r }
    }

    /// Raises a number to an integer power.
    ///
    /// Using this function is generally faster than using `powf`
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 2.0_f32;
    /// let abs_difference = (x.powi(2) - (x * x)).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn powi(self, n: i32) -> f32 {
        unsafe { intrinsics::powif32(self, n) }
    }

    /// Raises a number to a floating point power.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 2.0_f32;
    /// let abs_difference = (x.powf(2.0) - (x * x)).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn powf(self, n: f32) -> f32 {
        unsafe { intrinsics::powf32(self, n) }
    }

    /// Returns the square root of a number.
    ///
    /// Returns NaN if `self` is a negative number.
    ///
    /// # Examples
    ///
    /// ```
    /// let positive = 4.0_f32;
    /// let negative = -4.0_f32;
    ///
    /// let abs_difference = (positive.sqrt() - 2.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// assert!(negative.sqrt().is_nan());
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn sqrt(self) -> f32 {
        unsafe { intrinsics::sqrtf32(self) }
    }

    /// Returns `e^(self)`, (the exponential function).
    ///
    /// # Examples
    ///
    /// ```
    /// let one = 1.0f32;
    /// // e^1
    /// let e = one.exp();
    ///
    /// // ln(e) - 1 == 0
    /// let abs_difference = (e.ln() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn exp(self) -> f32 {
        unsafe { intrinsics::expf32(self) }
    }

    /// Returns `2^(self)`.
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 2.0f32;
    ///
    /// // 2^2 - 4 == 0
    /// let abs_difference = (f.exp2() - 4.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn exp2(self) -> f32 {
        unsafe { intrinsics::exp2f32(self) }
    }

    /// Returns the natural logarithm of the number.
    ///
    /// # Examples
    ///
    /// ```
    /// let one = 1.0f32;
    /// // e^1
    /// let e = one.exp();
    ///
    /// // ln(e) - 1 == 0
    /// let abs_difference = (e.ln() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn ln(self) -> f32 {
        unsafe { intrinsics::logf32(self) }
    }

    /// Returns the logarithm of the number with respect to an arbitrary base.
    ///
    /// The result may not be correctly rounded owing to implementation details;
    /// `self.log2()` can produce more accurate results for base 2, and
    /// `self.log10()` can produce more accurate results for base 10.
    ///
    /// # Examples
    ///
    /// ```
    /// let five = 5.0f32;
    ///
    /// // log5(5) - 1 == 0
    /// let abs_difference = (five.log(5.0) - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn log(self, base: f32) -> f32 {
        self.ln() / base.ln()
    }

    /// Returns the base 2 logarithm of the number.
    ///
    /// # Examples
    ///
    /// ```
    /// let two = 2.0f32;
    ///
    /// // log2(2) - 1 == 0
    /// let abs_difference = (two.log2() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn log2(self) -> f32 {
        #[cfg(target_os = "android")]
        return crate::sys::android::log2f32(self);
        #[cfg(not(target_os = "android"))]
        return unsafe { intrinsics::log2f32(self) };
    }

    /// Returns the base 10 logarithm of the number.
    ///
    /// # Examples
    ///
    /// ```
    /// let ten = 10.0f32;
    ///
    /// // log10(10) - 1 == 0
    /// let abs_difference = (ten.log10() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn log10(self) -> f32 {
        unsafe { intrinsics::log10f32(self) }
    }

    /// The positive difference of two numbers.
    ///
    /// * If `self <= other`: `0:0`
    /// * Else: `self - other`
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 3.0f32;
    /// let y = -3.0f32;
    ///
    /// let abs_difference_x = (x.abs_sub(1.0) - 2.0).abs();
    /// let abs_difference_y = (y.abs_sub(1.0) - 0.0).abs();
    ///
    /// assert!(abs_difference_x <= f32::EPSILON);
    /// assert!(abs_difference_y <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    #[rustc_deprecated(
        since = "1.10.0",
        reason = "you probably meant `(self - other).abs()`: \
                  this operation is `(self - other).max(0.0)` \
                  except that `abs_sub` also propagates NaNs (also \
                  known as `fdimf` in C). If you truly need the positive \
                  difference, consider using that expression or the C function \
                  `fdimf`, depending on how you wish to handle NaN (please consider \
                  filing an issue describing your use-case too)."
    )]
    pub fn abs_sub(self, other: f32) -> f32 {
        unsafe { cmath::fdimf(self, other) }
    }

    /// Returns the cubic root of a number.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 8.0f32;
    ///
    /// // x^(1/3) - 2 == 0
    /// let abs_difference = (x.cbrt() - 2.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn cbrt(self) -> f32 {
        unsafe { cmath::cbrtf(self) }
    }

    /// Calculates the length of the hypotenuse of a right-angle triangle given
    /// legs of length `x` and `y`.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 2.0f32;
    /// let y = 3.0f32;
    ///
    /// // sqrt(x^2 + y^2)
    /// let abs_difference = (x.hypot(y) - (x.powi(2) + y.powi(2)).sqrt()).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn hypot(self, other: f32) -> f32 {
        unsafe { cmath::hypotf(self, other) }
    }

    /// Computes the sine of a number (in radians).
    ///
    /// # Examples
    ///
    /// ```
    /// let x = std::f32::consts::FRAC_PI_2;
    ///
    /// let abs_difference = (x.sin() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn sin(self) -> f32 {
        unsafe { intrinsics::sinf32(self) }
    }

    /// Computes the cosine of a number (in radians).
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 2.0 * std::f32::consts::PI;
    ///
    /// let abs_difference = (x.cos() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn cos(self) -> f32 {
        unsafe { intrinsics::cosf32(self) }
    }

    /// Computes the tangent of a number (in radians).
    ///
    /// # Examples
    ///
    /// ```
    /// let x = std::f32::consts::FRAC_PI_4;
    /// let abs_difference = (x.tan() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn tan(self) -> f32 {
        unsafe { cmath::tanf(self) }
    }

    /// Computes the arcsine of a number. Return value is in radians in
    /// the range [-pi/2, pi/2] or NaN if the number is outside the range
    /// [-1, 1].
    ///
    /// # Examples
    ///
    /// ```
    /// let f = std::f32::consts::FRAC_PI_2;
    ///
    /// // asin(sin(pi/2))
    /// let abs_difference = (f.sin().asin() - std::f32::consts::FRAC_PI_2).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn asin(self) -> f32 {
        unsafe { cmath::asinf(self) }
    }

    /// Computes the arccosine of a number. Return value is in radians in
    /// the range [0, pi] or NaN if the number is outside the range
    /// [-1, 1].
    ///
    /// # Examples
    ///
    /// ```
    /// let f = std::f32::consts::FRAC_PI_4;
    ///
    /// // acos(cos(pi/4))
    /// let abs_difference = (f.cos().acos() - std::f32::consts::FRAC_PI_4).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn acos(self) -> f32 {
        unsafe { cmath::acosf(self) }
    }

    /// Computes the arctangent of a number. Return value is in radians in the
    /// range [-pi/2, pi/2];
    ///
    /// # Examples
    ///
    /// ```
    /// let f = 1.0f32;
    ///
    /// // atan(tan(1))
    /// let abs_difference = (f.tan().atan() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn atan(self) -> f32 {
        unsafe { cmath::atanf(self) }
    }

    /// Computes the four quadrant arctangent of `self` (`y`) and `other` (`x`) in radians.
    ///
    /// * `x = 0`, `y = 0`: `0`
    /// * `x >= 0`: `arctan(y/x)` -> `[-pi/2, pi/2]`
    /// * `y >= 0`: `arctan(y/x) + pi` -> `(pi/2, pi]`
    /// * `y < 0`: `arctan(y/x) - pi` -> `(-pi, -pi/2)`
    ///
    /// # Examples
    ///
    /// ```
    /// // Positive angles measured counter-clockwise
    /// // from positive x axis
    /// // -pi/4 radians (45 deg clockwise)
    /// let x1 = 3.0f32;
    /// let y1 = -3.0f32;
    ///
    /// // 3pi/4 radians (135 deg counter-clockwise)
    /// let x2 = -3.0f32;
    /// let y2 = 3.0f32;
    ///
    /// let abs_difference_1 = (y1.atan2(x1) - (-std::f32::consts::FRAC_PI_4)).abs();
    /// let abs_difference_2 = (y2.atan2(x2) - (3.0 * std::f32::consts::FRAC_PI_4)).abs();
    ///
    /// assert!(abs_difference_1 <= f32::EPSILON);
    /// assert!(abs_difference_2 <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn atan2(self, other: f32) -> f32 {
        unsafe { cmath::atan2f(self, other) }
    }

    /// Simultaneously computes the sine and cosine of the number, `x`. Returns
    /// `(sin(x), cos(x))`.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = std::f32::consts::FRAC_PI_4;
    /// let f = x.sin_cos();
    ///
    /// let abs_difference_0 = (f.0 - x.sin()).abs();
    /// let abs_difference_1 = (f.1 - x.cos()).abs();
    ///
    /// assert!(abs_difference_0 <= f32::EPSILON);
    /// assert!(abs_difference_1 <= f32::EPSILON);
    /// ```
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn sin_cos(self) -> (f32, f32) {
        (self.sin(), self.cos())
    }

    /// Returns `e^(self) - 1` in a way that is accurate even if the
    /// number is close to zero.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 6.0f32;
    ///
    /// // e^(ln(6)) - 1
    /// let abs_difference = (x.ln().exp_m1() - 5.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn exp_m1(self) -> f32 {
        unsafe { cmath::expm1f(self) }
    }

    /// Returns `ln(1+n)` (natural logarithm) more accurately than if
    /// the operations were performed separately.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = std::f32::consts::E - 1.0;
    ///
    /// // ln(1 + (e - 1)) == ln(e) == 1
    /// let abs_difference = (x.ln_1p() - 1.0).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn ln_1p(self) -> f32 {
        unsafe { cmath::log1pf(self) }
    }

    /// Hyperbolic sine function.
    ///
    /// # Examples
    ///
    /// ```
    /// let e = std::f32::consts::E;
    /// let x = 1.0f32;
    ///
    /// let f = x.sinh();
    /// // Solving sinh() at 1 gives `(e^2-1)/(2e)`
    /// let g = ((e * e) - 1.0) / (2.0 * e);
    /// let abs_difference = (f - g).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn sinh(self) -> f32 {
        unsafe { cmath::sinhf(self) }
    }

    /// Hyperbolic cosine function.
    ///
    /// # Examples
    ///
    /// ```
    /// let e = std::f32::consts::E;
    /// let x = 1.0f32;
    /// let f = x.cosh();
    /// // Solving cosh() at 1 gives this result
    /// let g = ((e * e) + 1.0) / (2.0 * e);
    /// let abs_difference = (f - g).abs();
    ///
    /// // Same result
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn cosh(self) -> f32 {
        unsafe { cmath::coshf(self) }
    }

    /// Hyperbolic tangent function.
    ///
    /// # Examples
    ///
    /// ```
    /// let e = std::f32::consts::E;
    /// let x = 1.0f32;
    ///
    /// let f = x.tanh();
    /// // Solving tanh() at 1 gives `(1 - e^(-2))/(1 + e^(-2))`
    /// let g = (1.0 - e.powi(-2)) / (1.0 + e.powi(-2));
    /// let abs_difference = (f - g).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn tanh(self) -> f32 {
        unsafe { cmath::tanhf(self) }
    }

    /// Inverse hyperbolic sine function.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 1.0f32;
    /// let f = x.sinh().asinh();
    ///
    /// let abs_difference = (f - x).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn asinh(self) -> f32 {
        if self == NEG_INFINITY {
            NEG_INFINITY
        } else {
            (self + ((self * self) + 1.0).sqrt()).ln().copysign(self)
        }
    }

    /// Inverse hyperbolic cosine function.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = 1.0f32;
    /// let f = x.cosh().acosh();
    ///
    /// let abs_difference = (f - x).abs();
    ///
    /// assert!(abs_difference <= f32::EPSILON);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn acosh(self) -> f32 {
        if self < 1.0 { crate::f32::NAN } else { (self + ((self * self) - 1.0).sqrt()).ln() }
    }

    /// Inverse hyperbolic tangent function.
    ///
    /// # Examples
    ///
    /// ```
    /// let e = std::f32::consts::E;
    /// let f = e.tanh().atanh();
    ///
    /// let abs_difference = (f - e).abs();
    ///
    /// assert!(abs_difference <= 1e-5);
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[inline]
    pub fn atanh(self) -> f32 {
        0.5 * ((2.0 * self) / (1.0 - self)).ln_1p()
    }

    /// Restrict a value to a certain interval unless it is NaN.
    ///
    /// Returns `max` if `self` is greater than `max`, and `min` if `self` is
    /// less than `min`. Otherwise this returns `self`.
    ///
    /// Not that this function returns NaN if the initial value was NaN as
    /// well.
    ///
    /// # Panics
    ///
    /// Panics if `min > max`, `min` is NaN, or `max` is NaN.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(clamp)]
    /// assert!((-3.0f32).clamp(-2.0, 1.0) == -2.0);
    /// assert!((0.0f32).clamp(-2.0, 1.0) == 0.0);
    /// assert!((2.0f32).clamp(-2.0, 1.0) == 1.0);
    /// assert!((f32::NAN).clamp(-2.0, 1.0).is_nan());
    /// ```
    #[must_use = "method returns a new number and does not mutate the original value"]
    #[unstable(feature = "clamp", issue = "44095")]
    #[inline]
    pub fn clamp(self, min: f32, max: f32) -> f32 {
        assert!(min <= max);
        let mut x = self;
        if x < min {
            x = min;
        }
        if x > max {
            x = max;
        }
        x
    }
}

#[cfg(test)]
mod tests {
    use crate::f32;
    use crate::f32::*;
    use crate::num::FpCategory as Fp;
    use crate::num::*;

    #[test]
    fn test_num_f32() {
        test_num(10f32, 2f32);
    }

    #[test]
    fn test_min_nan() {
        assert_eq!(NAN.min(2.0), 2.0);
        assert_eq!(2.0f32.min(NAN), 2.0);
    }

    #[test]
    fn test_max_nan() {
        assert_eq!(NAN.max(2.0), 2.0);
        assert_eq!(2.0f32.max(NAN), 2.0);
    }

    #[test]
    fn test_nan() {
        let nan: f32 = f32::NAN;
        assert!(nan.is_nan());
        assert!(!nan.is_infinite());
        assert!(!nan.is_finite());
        assert!(!nan.is_normal());
        assert!(nan.is_sign_positive());
        assert!(!nan.is_sign_negative());
        assert_eq!(Fp::Nan, nan.classify());
    }

    #[test]
    fn test_infinity() {
        let inf: f32 = f32::INFINITY;
        assert!(inf.is_infinite());
        assert!(!inf.is_finite());
        assert!(inf.is_sign_positive());
        assert!(!inf.is_sign_negative());
        assert!(!inf.is_nan());
        assert!(!inf.is_normal());
        assert_eq!(Fp::Infinite, inf.classify());
    }

    #[test]
    fn test_neg_infinity() {
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert!(neg_inf.is_infinite());
        assert!(!neg_inf.is_finite());
        assert!(!neg_inf.is_sign_positive());
        assert!(neg_inf.is_sign_negative());
        assert!(!neg_inf.is_nan());
        assert!(!neg_inf.is_normal());
        assert_eq!(Fp::Infinite, neg_inf.classify());
    }

    #[test]
    fn test_zero() {
        let zero: f32 = 0.0f32;
        assert_eq!(0.0, zero);
        assert!(!zero.is_infinite());
        assert!(zero.is_finite());
        assert!(zero.is_sign_positive());
        assert!(!zero.is_sign_negative());
        assert!(!zero.is_nan());
        assert!(!zero.is_normal());
        assert_eq!(Fp::Zero, zero.classify());
    }

    #[test]
    fn test_neg_zero() {
        let neg_zero: f32 = -0.0;
        assert_eq!(0.0, neg_zero);
        assert!(!neg_zero.is_infinite());
        assert!(neg_zero.is_finite());
        assert!(!neg_zero.is_sign_positive());
        assert!(neg_zero.is_sign_negative());
        assert!(!neg_zero.is_nan());
        assert!(!neg_zero.is_normal());
        assert_eq!(Fp::Zero, neg_zero.classify());
    }

    #[test]
    fn test_one() {
        let one: f32 = 1.0f32;
        assert_eq!(1.0, one);
        assert!(!one.is_infinite());
        assert!(one.is_finite());
        assert!(one.is_sign_positive());
        assert!(!one.is_sign_negative());
        assert!(!one.is_nan());
        assert!(one.is_normal());
        assert_eq!(Fp::Normal, one.classify());
    }

    #[test]
    fn test_is_nan() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert!(nan.is_nan());
        assert!(!0.0f32.is_nan());
        assert!(!5.3f32.is_nan());
        assert!(!(-10.732f32).is_nan());
        assert!(!inf.is_nan());
        assert!(!neg_inf.is_nan());
    }

    #[test]
    fn test_is_infinite() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert!(!nan.is_infinite());
        assert!(inf.is_infinite());
        assert!(neg_inf.is_infinite());
        assert!(!0.0f32.is_infinite());
        assert!(!42.8f32.is_infinite());
        assert!(!(-109.2f32).is_infinite());
    }

    #[test]
    fn test_is_finite() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert!(!nan.is_finite());
        assert!(!inf.is_finite());
        assert!(!neg_inf.is_finite());
        assert!(0.0f32.is_finite());
        assert!(42.8f32.is_finite());
        assert!((-109.2f32).is_finite());
    }

    #[test]
    fn test_is_normal() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        let zero: f32 = 0.0f32;
        let neg_zero: f32 = -0.0;
        assert!(!nan.is_normal());
        assert!(!inf.is_normal());
        assert!(!neg_inf.is_normal());
        assert!(!zero.is_normal());
        assert!(!neg_zero.is_normal());
        assert!(1f32.is_normal());
        assert!(1e-37f32.is_normal());
        assert!(!1e-38f32.is_normal());
    }

    #[test]
    fn test_classify() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        let zero: f32 = 0.0f32;
        let neg_zero: f32 = -0.0;
        assert_eq!(nan.classify(), Fp::Nan);
        assert_eq!(inf.classify(), Fp::Infinite);
        assert_eq!(neg_inf.classify(), Fp::Infinite);
        assert_eq!(zero.classify(), Fp::Zero);
        assert_eq!(neg_zero.classify(), Fp::Zero);
        assert_eq!(1f32.classify(), Fp::Normal);
        assert_eq!(1e-37f32.classify(), Fp::Normal);
        assert_eq!(1e-38f32.classify(), Fp::Subnormal);
    }

    #[test]
    fn test_floor() {
        assert_approx_eq!(1.0f32.floor(), 1.0f32);
        assert_approx_eq!(1.3f32.floor(), 1.0f32);
        assert_approx_eq!(1.5f32.floor(), 1.0f32);
        assert_approx_eq!(1.7f32.floor(), 1.0f32);
        assert_approx_eq!(0.0f32.floor(), 0.0f32);
        assert_approx_eq!((-0.0f32).floor(), -0.0f32);
        assert_approx_eq!((-1.0f32).floor(), -1.0f32);
        assert_approx_eq!((-1.3f32).floor(), -2.0f32);
        assert_approx_eq!((-1.5f32).floor(), -2.0f32);
        assert_approx_eq!((-1.7f32).floor(), -2.0f32);
    }

    #[test]
    fn test_ceil() {
        assert_approx_eq!(1.0f32.ceil(), 1.0f32);
        assert_approx_eq!(1.3f32.ceil(), 2.0f32);
        assert_approx_eq!(1.5f32.ceil(), 2.0f32);
        assert_approx_eq!(1.7f32.ceil(), 2.0f32);
        assert_approx_eq!(0.0f32.ceil(), 0.0f32);
        assert_approx_eq!((-0.0f32).ceil(), -0.0f32);
        assert_approx_eq!((-1.0f32).ceil(), -1.0f32);
        assert_approx_eq!((-1.3f32).ceil(), -1.0f32);
        assert_approx_eq!((-1.5f32).ceil(), -1.0f32);
        assert_approx_eq!((-1.7f32).ceil(), -1.0f32);
    }

    #[test]
    fn test_round() {
        assert_approx_eq!(1.0f32.round(), 1.0f32);
        assert_approx_eq!(1.3f32.round(), 1.0f32);
        assert_approx_eq!(1.5f32.round(), 2.0f32);
        assert_approx_eq!(1.7f32.round(), 2.0f32);
        assert_approx_eq!(0.0f32.round(), 0.0f32);
        assert_approx_eq!((-0.0f32).round(), -0.0f32);
        assert_approx_eq!((-1.0f32).round(), -1.0f32);
        assert_approx_eq!((-1.3f32).round(), -1.0f32);
        assert_approx_eq!((-1.5f32).round(), -2.0f32);
        assert_approx_eq!((-1.7f32).round(), -2.0f32);
    }

    #[test]
    fn test_trunc() {
        assert_approx_eq!(1.0f32.trunc(), 1.0f32);
        assert_approx_eq!(1.3f32.trunc(), 1.0f32);
        assert_approx_eq!(1.5f32.trunc(), 1.0f32);
        assert_approx_eq!(1.7f32.trunc(), 1.0f32);
        assert_approx_eq!(0.0f32.trunc(), 0.0f32);
        assert_approx_eq!((-0.0f32).trunc(), -0.0f32);
        assert_approx_eq!((-1.0f32).trunc(), -1.0f32);
        assert_approx_eq!((-1.3f32).trunc(), -1.0f32);
        assert_approx_eq!((-1.5f32).trunc(), -1.0f32);
        assert_approx_eq!((-1.7f32).trunc(), -1.0f32);
    }

    #[test]
    fn test_fract() {
        assert_approx_eq!(1.0f32.fract(), 0.0f32);
        assert_approx_eq!(1.3f32.fract(), 0.3f32);
        assert_approx_eq!(1.5f32.fract(), 0.5f32);
        assert_approx_eq!(1.7f32.fract(), 0.7f32);
        assert_approx_eq!(0.0f32.fract(), 0.0f32);
        assert_approx_eq!((-0.0f32).fract(), -0.0f32);
        assert_approx_eq!((-1.0f32).fract(), -0.0f32);
        assert_approx_eq!((-1.3f32).fract(), -0.3f32);
        assert_approx_eq!((-1.5f32).fract(), -0.5f32);
        assert_approx_eq!((-1.7f32).fract(), -0.7f32);
    }

    #[test]
    fn test_abs() {
        assert_eq!(INFINITY.abs(), INFINITY);
        assert_eq!(1f32.abs(), 1f32);
        assert_eq!(0f32.abs(), 0f32);
        assert_eq!((-0f32).abs(), 0f32);
        assert_eq!((-1f32).abs(), 1f32);
        assert_eq!(NEG_INFINITY.abs(), INFINITY);
        assert_eq!((1f32 / NEG_INFINITY).abs(), 0f32);
        assert!(NAN.abs().is_nan());
    }

    #[test]
    fn test_signum() {
        assert_eq!(INFINITY.signum(), 1f32);
        assert_eq!(1f32.signum(), 1f32);
        assert_eq!(0f32.signum(), 1f32);
        assert_eq!((-0f32).signum(), -1f32);
        assert_eq!((-1f32).signum(), -1f32);
        assert_eq!(NEG_INFINITY.signum(), -1f32);
        assert_eq!((1f32 / NEG_INFINITY).signum(), -1f32);
        assert!(NAN.signum().is_nan());
    }

    #[test]
    fn test_is_sign_positive() {
        assert!(INFINITY.is_sign_positive());
        assert!(1f32.is_sign_positive());
        assert!(0f32.is_sign_positive());
        assert!(!(-0f32).is_sign_positive());
        assert!(!(-1f32).is_sign_positive());
        assert!(!NEG_INFINITY.is_sign_positive());
        assert!(!(1f32 / NEG_INFINITY).is_sign_positive());
        assert!(NAN.is_sign_positive());
        assert!(!(-NAN).is_sign_positive());
    }

    #[test]
    fn test_is_sign_negative() {
        assert!(!INFINITY.is_sign_negative());
        assert!(!1f32.is_sign_negative());
        assert!(!0f32.is_sign_negative());
        assert!((-0f32).is_sign_negative());
        assert!((-1f32).is_sign_negative());
        assert!(NEG_INFINITY.is_sign_negative());
        assert!((1f32 / NEG_INFINITY).is_sign_negative());
        assert!(!NAN.is_sign_negative());
        assert!((-NAN).is_sign_negative());
    }

    #[test]
    fn test_mul_add() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_approx_eq!(12.3f32.mul_add(4.5, 6.7), 62.05);
        assert_approx_eq!((-12.3f32).mul_add(-4.5, -6.7), 48.65);
        assert_approx_eq!(0.0f32.mul_add(8.9, 1.2), 1.2);
        assert_approx_eq!(3.4f32.mul_add(-0.0, 5.6), 5.6);
        assert!(nan.mul_add(7.8, 9.0).is_nan());
        assert_eq!(inf.mul_add(7.8, 9.0), inf);
        assert_eq!(neg_inf.mul_add(7.8, 9.0), neg_inf);
        assert_eq!(8.9f32.mul_add(inf, 3.2), inf);
        assert_eq!((-3.2f32).mul_add(2.4, neg_inf), neg_inf);
    }

    #[test]
    fn test_recip() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_eq!(1.0f32.recip(), 1.0);
        assert_eq!(2.0f32.recip(), 0.5);
        assert_eq!((-0.4f32).recip(), -2.5);
        assert_eq!(0.0f32.recip(), inf);
        assert!(nan.recip().is_nan());
        assert_eq!(inf.recip(), 0.0);
        assert_eq!(neg_inf.recip(), 0.0);
    }

    #[test]
    fn test_powi() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_eq!(1.0f32.powi(1), 1.0);
        assert_approx_eq!((-3.1f32).powi(2), 9.61);
        assert_approx_eq!(5.9f32.powi(-2), 0.028727);
        assert_eq!(8.3f32.powi(0), 1.0);
        assert!(nan.powi(2).is_nan());
        assert_eq!(inf.powi(3), inf);
        assert_eq!(neg_inf.powi(2), inf);
    }

    #[test]
    fn test_powf() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_eq!(1.0f32.powf(1.0), 1.0);
        assert_approx_eq!(3.4f32.powf(4.5), 246.408218);
        assert_approx_eq!(2.7f32.powf(-3.2), 0.041652);
        assert_approx_eq!((-3.1f32).powf(2.0), 9.61);
        assert_approx_eq!(5.9f32.powf(-2.0), 0.028727);
        assert_eq!(8.3f32.powf(0.0), 1.0);
        assert!(nan.powf(2.0).is_nan());
        assert_eq!(inf.powf(2.0), inf);
        assert_eq!(neg_inf.powf(3.0), neg_inf);
    }

    #[test]
    fn test_sqrt_domain() {
        assert!(NAN.sqrt().is_nan());
        assert!(NEG_INFINITY.sqrt().is_nan());
        assert!((-1.0f32).sqrt().is_nan());
        assert_eq!((-0.0f32).sqrt(), -0.0);
        assert_eq!(0.0f32.sqrt(), 0.0);
        assert_eq!(1.0f32.sqrt(), 1.0);
        assert_eq!(INFINITY.sqrt(), INFINITY);
    }

    #[test]
    fn test_exp() {
        assert_eq!(1.0, 0.0f32.exp());
        assert_approx_eq!(2.718282, 1.0f32.exp());
        assert_approx_eq!(148.413162, 5.0f32.exp());

        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        let nan: f32 = f32::NAN;
        assert_eq!(inf, inf.exp());
        assert_eq!(0.0, neg_inf.exp());
        assert!(nan.exp().is_nan());
    }

    #[test]
    fn test_exp2() {
        assert_eq!(32.0, 5.0f32.exp2());
        assert_eq!(1.0, 0.0f32.exp2());

        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        let nan: f32 = f32::NAN;
        assert_eq!(inf, inf.exp2());
        assert_eq!(0.0, neg_inf.exp2());
        assert!(nan.exp2().is_nan());
    }

    #[test]
    fn test_ln() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_approx_eq!(1.0f32.exp().ln(), 1.0);
        assert!(nan.ln().is_nan());
        assert_eq!(inf.ln(), inf);
        assert!(neg_inf.ln().is_nan());
        assert!((-2.3f32).ln().is_nan());
        assert_eq!((-0.0f32).ln(), neg_inf);
        assert_eq!(0.0f32.ln(), neg_inf);
        assert_approx_eq!(4.0f32.ln(), 1.386294);
    }

    #[test]
    fn test_log() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_eq!(10.0f32.log(10.0), 1.0);
        assert_approx_eq!(2.3f32.log(3.5), 0.664858);
        assert_eq!(1.0f32.exp().log(1.0f32.exp()), 1.0);
        assert!(1.0f32.log(1.0).is_nan());
        assert!(1.0f32.log(-13.9).is_nan());
        assert!(nan.log(2.3).is_nan());
        assert_eq!(inf.log(10.0), inf);
        assert!(neg_inf.log(8.8).is_nan());
        assert!((-2.3f32).log(0.1).is_nan());
        assert_eq!((-0.0f32).log(2.0), neg_inf);
        assert_eq!(0.0f32.log(7.0), neg_inf);
    }

    #[test]
    fn test_log2() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_approx_eq!(10.0f32.log2(), 3.321928);
        assert_approx_eq!(2.3f32.log2(), 1.201634);
        assert_approx_eq!(1.0f32.exp().log2(), 1.442695);
        assert!(nan.log2().is_nan());
        assert_eq!(inf.log2(), inf);
        assert!(neg_inf.log2().is_nan());
        assert!((-2.3f32).log2().is_nan());
        assert_eq!((-0.0f32).log2(), neg_inf);
        assert_eq!(0.0f32.log2(), neg_inf);
    }

    #[test]
    fn test_log10() {
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_eq!(10.0f32.log10(), 1.0);
        assert_approx_eq!(2.3f32.log10(), 0.361728);
        assert_approx_eq!(1.0f32.exp().log10(), 0.434294);
        assert_eq!(1.0f32.log10(), 0.0);
        assert!(nan.log10().is_nan());
        assert_eq!(inf.log10(), inf);
        assert!(neg_inf.log10().is_nan());
        assert!((-2.3f32).log10().is_nan());
        assert_eq!((-0.0f32).log10(), neg_inf);
        assert_eq!(0.0f32.log10(), neg_inf);
    }

    #[test]
    fn test_to_degrees() {
        let pi: f32 = consts::PI;
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_eq!(0.0f32.to_degrees(), 0.0);
        assert_approx_eq!((-5.8f32).to_degrees(), -332.315521);
        assert_eq!(pi.to_degrees(), 180.0);
        assert!(nan.to_degrees().is_nan());
        assert_eq!(inf.to_degrees(), inf);
        assert_eq!(neg_inf.to_degrees(), neg_inf);
        assert_eq!(1_f32.to_degrees(), 57.2957795130823208767981548141051703);
    }

    #[test]
    fn test_to_radians() {
        let pi: f32 = consts::PI;
        let nan: f32 = f32::NAN;
        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        assert_eq!(0.0f32.to_radians(), 0.0);
        assert_approx_eq!(154.6f32.to_radians(), 2.698279);
        assert_approx_eq!((-332.31f32).to_radians(), -5.799903);
        assert_eq!(180.0f32.to_radians(), pi);
        assert!(nan.to_radians().is_nan());
        assert_eq!(inf.to_radians(), inf);
        assert_eq!(neg_inf.to_radians(), neg_inf);
    }

    #[test]
    fn test_asinh() {
        assert_eq!(0.0f32.asinh(), 0.0f32);
        assert_eq!((-0.0f32).asinh(), -0.0f32);

        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        let nan: f32 = f32::NAN;
        assert_eq!(inf.asinh(), inf);
        assert_eq!(neg_inf.asinh(), neg_inf);
        assert!(nan.asinh().is_nan());
        assert!((-0.0f32).asinh().is_sign_negative()); // issue 63271
        assert_approx_eq!(2.0f32.asinh(), 1.443635475178810342493276740273105f32);
        assert_approx_eq!((-2.0f32).asinh(), -1.443635475178810342493276740273105f32);
    }

    #[test]
    fn test_acosh() {
        assert_eq!(1.0f32.acosh(), 0.0f32);
        assert!(0.999f32.acosh().is_nan());

        let inf: f32 = f32::INFINITY;
        let neg_inf: f32 = f32::NEG_INFINITY;
        let nan: f32 = f32::NAN;
        assert_eq!(inf.acosh(), inf);
        assert!(neg_inf.acosh().is_nan());
        assert!(nan.acosh().is_nan());
        assert_approx_eq!(2.0f32.acosh(), 1.31695789692481670862504634730796844f32);
        assert_approx_eq!(3.0f32.acosh(), 1.76274717403908605046521864995958461f32);
    }

    #[test]
    fn test_atanh() {
        assert_eq!(0.0f32.atanh(), 0.0f32);
        assert_eq!((-0.0f32).atanh(), -0.0f32);

        let inf32: f32 = f32::INFINITY;
        let neg_inf32: f32 = f32::NEG_INFINITY;
        assert_eq!(1.0f32.atanh(), inf32);
        assert_eq!((-1.0f32).atanh(), neg_inf32);

        assert!(2f64.atanh().atanh().is_nan());
        assert!((-2f64).atanh().atanh().is_nan());

        let inf64: f32 = f32::INFINITY;
        let neg_inf64: f32 = f32::NEG_INFINITY;
        let nan32: f32 = f32::NAN;
        assert!(inf64.atanh().is_nan());
        assert!(neg_inf64.atanh().is_nan());
        assert!(nan32.atanh().is_nan());

        assert_approx_eq!(0.5f32.atanh(), 0.54930614433405484569762261846126285f32);
        assert_approx_eq!((-0.5f32).atanh(), -0.54930614433405484569762261846126285f32);
    }

    #[test]
    fn test_real_consts() {
        use super::consts;

        let pi: f32 = consts::PI;
        let frac_pi_2: f32 = consts::FRAC_PI_2;
        let frac_pi_3: f32 = consts::FRAC_PI_3;
        let frac_pi_4: f32 = consts::FRAC_PI_4;
        let frac_pi_6: f32 = consts::FRAC_PI_6;
        let frac_pi_8: f32 = consts::FRAC_PI_8;
        let frac_1_pi: f32 = consts::FRAC_1_PI;
        let frac_2_pi: f32 = consts::FRAC_2_PI;
        let frac_2_sqrtpi: f32 = consts::FRAC_2_SQRT_PI;
        let sqrt2: f32 = consts::SQRT_2;
        let frac_1_sqrt2: f32 = consts::FRAC_1_SQRT_2;
        let e: f32 = consts::E;
        let log2_e: f32 = consts::LOG2_E;
        let log10_e: f32 = consts::LOG10_E;
        let ln_2: f32 = consts::LN_2;
        let ln_10: f32 = consts::LN_10;

        assert_approx_eq!(frac_pi_2, pi / 2f32);
        assert_approx_eq!(frac_pi_3, pi / 3f32);
        assert_approx_eq!(frac_pi_4, pi / 4f32);
        assert_approx_eq!(frac_pi_6, pi / 6f32);
        assert_approx_eq!(frac_pi_8, pi / 8f32);
        assert_approx_eq!(frac_1_pi, 1f32 / pi);
        assert_approx_eq!(frac_2_pi, 2f32 / pi);
        assert_approx_eq!(frac_2_sqrtpi, 2f32 / pi.sqrt());
        assert_approx_eq!(sqrt2, 2f32.sqrt());
        assert_approx_eq!(frac_1_sqrt2, 1f32 / 2f32.sqrt());
        assert_approx_eq!(log2_e, e.log2());
        assert_approx_eq!(log10_e, e.log10());
        assert_approx_eq!(ln_2, 2f32.ln());
        assert_approx_eq!(ln_10, 10f32.ln());
    }

    #[test]
    fn test_float_bits_conv() {
        assert_eq!((1f32).to_bits(), 0x3f800000);
        assert_eq!((12.5f32).to_bits(), 0x41480000);
        assert_eq!((1337f32).to_bits(), 0x44a72000);
        assert_eq!((-14.25f32).to_bits(), 0xc1640000);
        assert_approx_eq!(f32::from_bits(0x3f800000), 1.0);
        assert_approx_eq!(f32::from_bits(0x41480000), 12.5);
        assert_approx_eq!(f32::from_bits(0x44a72000), 1337.0);
        assert_approx_eq!(f32::from_bits(0xc1640000), -14.25);

        // Check that NaNs roundtrip their bits regardless of signalingness
        // 0xA is 0b1010; 0x5 is 0b0101 -- so these two together clobbers all the mantissa bits
        let masked_nan1 = f32::NAN.to_bits() ^ 0x002A_AAAA;
        let masked_nan2 = f32::NAN.to_bits() ^ 0x0055_5555;
        assert!(f32::from_bits(masked_nan1).is_nan());
        assert!(f32::from_bits(masked_nan2).is_nan());

        assert_eq!(f32::from_bits(masked_nan1).to_bits(), masked_nan1);
        assert_eq!(f32::from_bits(masked_nan2).to_bits(), masked_nan2);
    }

    #[test]
    #[should_panic]
    fn test_clamp_min_greater_than_max() {
        let _ = 1.0f32.clamp(3.0, 1.0);
    }

    #[test]
    #[should_panic]
    fn test_clamp_min_is_nan() {
        let _ = 1.0f32.clamp(NAN, 1.0);
    }

    #[test]
    #[should_panic]
    fn test_clamp_max_is_nan() {
        let _ = 1.0f32.clamp(3.0, NAN);
    }
}