Dockerfile.windows - third_party/github.com/moby/moby - Git at Google

 # escape=`

 # -----------------------------------------------------------------------------------------
 # This file describes the standard way to build Docker in a container on Windows
 # Server 2016 or Windows 10.
 #
 # Maintainer: @jhowardmsft
 # -----------------------------------------------------------------------------------------


 # Prerequisites:
 # --------------
 #
 # 1. Windows Server 2016 or Windows 10 with all Windows updates applied. The major
 #    build number must be at least 14393. This can be confirmed, for example, by
 #    running the following from an elevated PowerShell prompt - this sample output
 #    is from a fully up to date machine as at mid-November 2016:
 #
 #    >> PS C:\> $(gin).WindowsBuildLabEx
 #    >> 14393.447.amd64fre.rs1_release_inmarket.161102-0100
 #
 # 2. Git for Windows (or another git client) must be installed. https://git-scm.com/download/win.
 #
 # 3. The machine must be configured to run containers. For example, by following
 #    the quick start guidance at https://msdn.microsoft.com/en-us/virtualization/windowscontainers/quick_start/quick_start or
 #    https://github.com/docker/labs/blob/master/windows/windows-containers/Setup.md
 #
 # 4. If building in a Hyper-V VM: For Windows Server 2016 using Windows Server
 #    containers as the default option, it is recommended you have at least 1GB
 #    of memory assigned; For Windows 10 where Hyper-V Containers are employed, you
 #    should have at least 4GB of memory assigned. Note also, to run Hyper-V
 #    containers in a VM, it is necessary to configure the VM for nested virtualization.

 # -----------------------------------------------------------------------------------------


 # Usage:
 # -----
 #
 #  The following steps should be run from an (elevated*) Windows PowerShell prompt.
 #
 #  (*In a default installation of containers on Windows following the quick-start guidance at
 #    https://msdn.microsoft.com/en-us/virtualization/windowscontainers/quick_start/quick_start,
 #    the docker.exe client must run elevated to be able to connect to the daemon).
 #
 # 1. Clone the sources from github.com:
 #
 #    >>   git clone https://github.com/docker/docker.git C:\go\src\github.com\docker\docker
 #    >>   Cloning into 'C:\go\src\github.com\docker\docker'...
 #    >>   remote: Counting objects: 186216, done.
 #    >>   remote: Compressing objects: 100% (21/21), done.
 #    >>   remote: Total 186216 (delta 5), reused 0 (delta 0), pack-reused 186195
 #    >>   Receiving objects: 100% (186216/186216), 104.32 MiB | 8.18 MiB/s, done.
 #    >>   Resolving deltas: 100% (123139/123139), done.
 #    >>   Checking connectivity... done.
 #    >>   Checking out files: 100% (3912/3912), done.
 #    >>   PS C:\>
 #
 #
 # 2. Change directory to the cloned docker sources:
 #
 #    >>   cd C:\go\src\github.com\docker\docker
 #
 #
 # 3. Build a docker image with the components required to build the docker binaries from source
 #    by running one of the following:
 #
 #    >>   docker build -t nativebuildimage -f Dockerfile.windows .
 #    >>   docker build -t nativebuildimage -f Dockerfile.windows -m 2GB .    (if using Hyper-V containers)
 #
 #
 # 4. Build the docker executable binaries by running one of the following:
 #
 #    >>   docker run --name binaries nativebuildimage hack\make.ps1 -Binary
 #    >>   docker run --name binaries -m 2GB nativebuildimage hack\make.ps1 -Binary    (if using Hyper-V containers)
 #
 #
 # 5. Copy the binaries out of the container, replacing HostPath with an appropriate destination
 #    folder on the host system where you want the binaries to be located.
 #
 #    >>   docker cp binaries:C:\go\src\github.com\docker\docker\bundles\docker.exe C:\HostPath\docker.exe
 #    >>   docker cp binaries:C:\go\src\github.com\docker\docker\bundles\dockerd.exe C:\HostPath\dockerd.exe
 #
 #
 # 6. (Optional) Remove the interim container holding the built executable binaries:
 #
 #    >>    docker rm binaries
 #
 #
 # 7. (Optional) Remove the image used for the container in which the executable
 #    binaries are build. Tip - it may be useful to keep this image around if you need to
 #    build multiple times. Then you can take advantage of the builder cache to have an
 #    image which has all the components required to build the binaries already installed.
 #
 #    >>    docker rmi nativebuildimage
 #

 # -----------------------------------------------------------------------------------------


 #  The validation tests can either run in a container, or directly on the host. To run in a
 #  container, ensure you have created the nativebuildimage above. Then run one of the
 #  following from an (elevated) Windows PowerShell prompt:
 #
 #    >>   docker run --rm nativebuildimage hack\make.ps1 -DCO -PkgImports -GoFormat
 #    >>   docker run --rm -m 2GB nativebuildimage hack\make.ps1 -DCO -PkgImports -GoFormat    (if using Hyper-V containers)

 # To run the validation tests on the host, from the root of the repository, run the
 # following from a Windows PowerShell prompt (elevation is not required): (Note Go
 # must be installed to run these tests)
 #
 #    >>   hack\make.ps1 -DCO -PkgImports -GoFormat

 # -----------------------------------------------------------------------------------------


 #  To run unit tests, ensure you have created the nativebuildimage above. Then run one of
 #  the following from an (elevated) Windows PowerShell prompt:
 #
 #    >>   docker run --rm nativebuildimage hack\make.ps1 -TestUnit
 #    >>   docker run --rm -m 2GB nativebuildimage hack\make.ps1 -TestUnit    (if using Hyper-V containers)


 # -----------------------------------------------------------------------------------------


 #  To run all tests and binary build, ensure you have created the nativebuildimage above. Then
 #  run one of the following from an (elevated) Windows PowerShell prompt:
 #
 #    >>   docker run nativebuildimage hack\make.ps1 -All
 #    >>   docker run -m 2GB nativebuildimage hack\make.ps1 -All    (if using Hyper-V containers)

 # -----------------------------------------------------------------------------------------


 # Important notes:
 # ---------------
 #
 # Don't attempt to use a bind-mount to pass a local directory as the bundles target
 # directory. It does not work (golang attempts for follow a mapped folder incorrectly).
 # Instead, use docker cp as per the example.
 #
 # go.zip is not removed from the image as it is used by the Windows CI servers
 # to ensure the host and image are running consistent versions of go.
 #
 # Nanoserver support is a work in progress. Although the image will build if the
 # FROM statement is updated, it will not work when running autogen through hack\make.ps1.
 # It is suspected that the required GCC utilities (eg gcc, windres, windmc) silently
 # quit due to the use of console hooks which are not available.
 #
 # The docker integration tests do not currently run in a container on Windows, predominantly
 # due to Windows not supporting privileged mode, so anything using a volume would fail.
 # They (along with the rest of the docker CI suite) can be run using
 # https://github.com/jhowardmsft/docker-w2wCIScripts/blob/master/runCI/Invoke-DockerCI.ps1.
 #
 # -----------------------------------------------------------------------------------------


 # The number of build steps below are explicitly minimised to improve performance.
 FROM microsoft/windowsservercore

 # Use PowerShell as the default shell
 SHELL ["powershell", "-command"]

 # Environment variable notes:
 #  - GO_VERSION must be consistent with 'Dockerfile' used by Linux.
 #  - FROM_DOCKERFILE is used for detection of building within a container.
 ENV GO_VERSION=1.7.5 `
     GIT_VERSION=2.11.0 `
     GOPATH=C:\go `
     FROM_DOCKERFILE=1

 RUN `
   $ErrorActionPreference = 'Stop'; `
   $ProgressPreference = 'SilentlyContinue'; `
   `
   Function Test-Nano() { `
     $EditionId = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'EditionID').EditionId; `
     return (($EditionId -eq 'ServerStandardNano') -or ($EditionId -eq 'ServerDataCenterNano') -or ($EditionId -eq 'NanoServer')); `
   }`
   `
   Function Download-File([string] $source, [string] $target) { `
     if (Test-Nano) { `
       $handler = New-Object System.Net.Http.HttpClientHandler; `
       $client = New-Object System.Net.Http.HttpClient($handler); `
       $client.Timeout = New-Object System.TimeSpan(0, 30, 0); `
       $cancelTokenSource = [System.Threading.CancellationTokenSource]::new(); `
       $responseMsg = $client.GetAsync([System.Uri]::new($source), $cancelTokenSource.Token); `
       $responseMsg.Wait(); `
       if (!$responseMsg.IsCanceled) { `
         $response = $responseMsg.Result; `
         if ($response.IsSuccessStatusCode) { `
           $downloadedFileStream = [System.IO.FileStream]::new($target, [System.IO.FileMode]::Create, [System.IO.FileAccess]::Write); `
           $copyStreamOp = $response.Content.CopyToAsync($downloadedFileStream); `
           $copyStreamOp.Wait(); `
           $downloadedFileStream.Close(); `
           if ($copyStreamOp.Exception -ne $null) { throw $copyStreamOp.Exception } `
         } `
       } else { `
       Throw ("Failed to download " + $source) `
       }`
     } else { `
       $webClient = New-Object System.Net.WebClient; `
       $webClient.DownloadFile($source, $target); `
     } `
   } `
   `
   setx /M PATH $('C:\git\bin;C:\git\usr\bin;'+$Env:PATH+';C:\gcc\bin;C:\go\bin'); `
   `
   Write-Host INFO: Downloading git...; `
   $location='https://github.com/git-for-windows/git/releases/download/v'+$env:GIT_VERSION+'.windows.1/PortableGit-'+$env:GIT_VERSION+'-64-bit.7z.exe'; `
   Download-File $location C:\gitsetup.7z.exe; `
   `
   Write-Host INFO: Downloading go...; `
   Download-File $('https://golang.org/dl/go'+$Env:GO_VERSION+'.windows-amd64.zip') C:\go.zip; `
   `
   Write-Host INFO: Downloading compiler 1 of 3...; `
   Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/gcc.zip C:\gcc.zip; `
   `
   Write-Host INFO: Downloading compiler 2 of 3...; `
   Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/runtime.zip C:\runtime.zip; `
   `
   Write-Host INFO: Downloading compiler 3 of 3...; `
   Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/binutils.zip C:\binutils.zip; `
   `
   Write-Host INFO: Installing PS7Zip package...; `
   Install-Package PS7Zip -Force | Out-Null; `
   Write-Host INFO: Importing PS7Zip...; `
   Import-Module PS7Zip -Force; `
   New-Item C:\git -ItemType Directory | Out-Null ; `
   cd C:\git; `
   Write-Host INFO: Extracting git...; `
   Expand-7Zip C:\gitsetup.7z.exe | Out-Null; `
   cd C:\; `
   `
   Write-Host INFO: Expanding go...; `
   Expand-Archive C:\go.zip -DestinationPath C:\; `
   `
   Write-Host INFO: Expanding compiler 1 of 3...; `
   Expand-Archive C:\gcc.zip -DestinationPath C:\gcc -Force; `
   Write-Host INFO: Expanding compiler 2 of 3...; `
   Expand-Archive C:\runtime.zip -DestinationPath C:\gcc -Force; `
   Write-Host INFO: Expanding compiler 3 of 3...; `
   Expand-Archive C:\binutils.zip -DestinationPath C:\gcc -Force; `
   `
   Write-Host INFO: Removing downloaded files...; `
   Remove-Item C:\gcc.zip; `
   Remove-Item C:\runtime.zip; `
   Remove-Item C:\binutils.zip; `
   Remove-Item C:\gitsetup.7z.exe; `
   `
   Write-Host INFO: Creating source directory...; `
   New-Item -ItemType Directory -Path C:\go\src\github.com\docker\docker | Out-Null; `
   `
   Write-Host INFO: Configuring git core.autocrlf...; `
   C:\git\bin\git config --global core.autocrlf true; `
   `
   Write-Host INFO: Completed

 # Make PowerShell the default entrypoint
 ENTRYPOINT ["powershell.exe"]

 # Set the working directory to the location of the sources
 WORKDIR C:\go\src\github.com\docker\docker

 # Copy the sources into the container
 COPY . .
	# escape=`

	# -----------------------------------------------------------------------------------------
	# This file describes the standard way to build Docker in a container on Windows
	# Server 2016 or Windows 10.
	#
	# Maintainer: @jhowardmsft
	# -----------------------------------------------------------------------------------------


	# Prerequisites:
	# --------------
	#
	# 1. Windows Server 2016 or Windows 10 with all Windows updates applied. The major
	# build number must be at least 14393. This can be confirmed, for example, by
	# running the following from an elevated PowerShell prompt - this sample output
	# is from a fully up to date machine as at mid-November 2016:
	#
	# >> PS C:\> $(gin).WindowsBuildLabEx
	# >> 14393.447.amd64fre.rs1_release_inmarket.161102-0100
	#
	# 2. Git for Windows (or another git client) must be installed. https://git-scm.com/download/win.
	#
	# 3. The machine must be configured to run containers. For example, by following
	# the quick start guidance at https://msdn.microsoft.com/en-us/virtualization/windowscontainers/quick_start/quick_start or
	# https://github.com/docker/labs/blob/master/windows/windows-containers/Setup.md
	#
	# 4. If building in a Hyper-V VM: For Windows Server 2016 using Windows Server
	# containers as the default option, it is recommended you have at least 1GB
	# of memory assigned; For Windows 10 where Hyper-V Containers are employed, you
	# should have at least 4GB of memory assigned. Note also, to run Hyper-V
	# containers in a VM, it is necessary to configure the VM for nested virtualization.

	# -----------------------------------------------------------------------------------------


	# Usage:
	# -----
	#
	# The following steps should be run from an (elevated*) Windows PowerShell prompt.
	#
	# (*In a default installation of containers on Windows following the quick-start guidance at
	# https://msdn.microsoft.com/en-us/virtualization/windowscontainers/quick_start/quick_start,
	# the docker.exe client must run elevated to be able to connect to the daemon).
	#
	# 1. Clone the sources from github.com:
	#
	# >> git clone https://github.com/docker/docker.git C:\go\src\github.com\docker\docker
	# >> Cloning into 'C:\go\src\github.com\docker\docker'...
	# >> remote: Counting objects: 186216, done.
	# >> remote: Compressing objects: 100% (21/21), done.
	# >> remote: Total 186216 (delta 5), reused 0 (delta 0), pack-reused 186195
	# >> Receiving objects: 100% (186216/186216), 104.32 MiB \| 8.18 MiB/s, done.
	# >> Resolving deltas: 100% (123139/123139), done.
	# >> Checking connectivity... done.
	# >> Checking out files: 100% (3912/3912), done.
	# >> PS C:\>
	#
	#
	# 2. Change directory to the cloned docker sources:
	#
	# >> cd C:\go\src\github.com\docker\docker
	#
	#
	# 3. Build a docker image with the components required to build the docker binaries from source
	# by running one of the following:
	#
	# >> docker build -t nativebuildimage -f Dockerfile.windows .
	# >> docker build -t nativebuildimage -f Dockerfile.windows -m 2GB . (if using Hyper-V containers)
	#
	#
	# 4. Build the docker executable binaries by running one of the following:
	#
	# >> docker run --name binaries nativebuildimage hack\make.ps1 -Binary
	# >> docker run --name binaries -m 2GB nativebuildimage hack\make.ps1 -Binary (if using Hyper-V containers)
	#
	#
	# 5. Copy the binaries out of the container, replacing HostPath with an appropriate destination
	# folder on the host system where you want the binaries to be located.
	#
	# >> docker cp binaries:C:\go\src\github.com\docker\docker\bundles\docker.exe C:\HostPath\docker.exe
	# >> docker cp binaries:C:\go\src\github.com\docker\docker\bundles\dockerd.exe C:\HostPath\dockerd.exe
	#
	#
	# 6. (Optional) Remove the interim container holding the built executable binaries:
	#
	# >> docker rm binaries
	#
	#
	# 7. (Optional) Remove the image used for the container in which the executable
	# binaries are build. Tip - it may be useful to keep this image around if you need to
	# build multiple times. Then you can take advantage of the builder cache to have an
	# image which has all the components required to build the binaries already installed.
	#
	# >> docker rmi nativebuildimage
	#

	# -----------------------------------------------------------------------------------------


	# The validation tests can either run in a container, or directly on the host. To run in a
	# container, ensure you have created the nativebuildimage above. Then run one of the
	# following from an (elevated) Windows PowerShell prompt:
	#
	# >> docker run --rm nativebuildimage hack\make.ps1 -DCO -PkgImports -GoFormat
	# >> docker run --rm -m 2GB nativebuildimage hack\make.ps1 -DCO -PkgImports -GoFormat (if using Hyper-V containers)

	# To run the validation tests on the host, from the root of the repository, run the
	# following from a Windows PowerShell prompt (elevation is not required): (Note Go
	# must be installed to run these tests)
	#
	# >> hack\make.ps1 -DCO -PkgImports -GoFormat

	# -----------------------------------------------------------------------------------------


	# To run unit tests, ensure you have created the nativebuildimage above. Then run one of
	# the following from an (elevated) Windows PowerShell prompt:
	#
	# >> docker run --rm nativebuildimage hack\make.ps1 -TestUnit
	# >> docker run --rm -m 2GB nativebuildimage hack\make.ps1 -TestUnit (if using Hyper-V containers)


	# -----------------------------------------------------------------------------------------


	# To run all tests and binary build, ensure you have created the nativebuildimage above. Then
	# run one of the following from an (elevated) Windows PowerShell prompt:
	#
	# >> docker run nativebuildimage hack\make.ps1 -All
	# >> docker run -m 2GB nativebuildimage hack\make.ps1 -All (if using Hyper-V containers)

	# -----------------------------------------------------------------------------------------


	# Important notes:
	# ---------------
	#
	# Don't attempt to use a bind-mount to pass a local directory as the bundles target
	# directory. It does not work (golang attempts for follow a mapped folder incorrectly).
	# Instead, use docker cp as per the example.
	#
	# go.zip is not removed from the image as it is used by the Windows CI servers
	# to ensure the host and image are running consistent versions of go.
	#
	# Nanoserver support is a work in progress. Although the image will build if the
	# FROM statement is updated, it will not work when running autogen through hack\make.ps1.
	# It is suspected that the required GCC utilities (eg gcc, windres, windmc) silently
	# quit due to the use of console hooks which are not available.
	#
	# The docker integration tests do not currently run in a container on Windows, predominantly
	# due to Windows not supporting privileged mode, so anything using a volume would fail.
	# They (along with the rest of the docker CI suite) can be run using
	# https://github.com/jhowardmsft/docker-w2wCIScripts/blob/master/runCI/Invoke-DockerCI.ps1.
	#
	# -----------------------------------------------------------------------------------------


	# The number of build steps below are explicitly minimised to improve performance.
	FROM microsoft/windowsservercore

	# Use PowerShell as the default shell
	SHELL ["powershell", "-command"]

	# Environment variable notes:
	# - GO_VERSION must be consistent with 'Dockerfile' used by Linux.
	# - FROM_DOCKERFILE is used for detection of building within a container.
	ENV GO_VERSION=1.7.5 `
	GIT_VERSION=2.11.0 `
	GOPATH=C:\go `
	FROM_DOCKERFILE=1

	RUN `
	$ErrorActionPreference = 'Stop'; `
	$ProgressPreference = 'SilentlyContinue'; `
	`
	Function Test-Nano() { `
	$EditionId = (Get-ItemProperty -Path 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion' -Name 'EditionID').EditionId; `
	return (($EditionId -eq 'ServerStandardNano') -or ($EditionId -eq 'ServerDataCenterNano') -or ($EditionId -eq 'NanoServer')); `
	}`
	`
	Function Download-File([string] $source, [string] $target) { `
	if (Test-Nano) { `
	$handler = New-Object System.Net.Http.HttpClientHandler; `
	$client = New-Object System.Net.Http.HttpClient($handler); `
	$client.Timeout = New-Object System.TimeSpan(0, 30, 0); `
	$cancelTokenSource = [System.Threading.CancellationTokenSource]::new(); `
	$responseMsg = $client.GetAsync([System.Uri]::new($source), $cancelTokenSource.Token); `
	$responseMsg.Wait(); `
	if (!$responseMsg.IsCanceled) { `
	$response = $responseMsg.Result; `
	if ($response.IsSuccessStatusCode) { `
	$downloadedFileStream = [System.IO.FileStream]::new($target, [System.IO.FileMode]::Create, [System.IO.FileAccess]::Write); `
	$copyStreamOp = $response.Content.CopyToAsync($downloadedFileStream); `
	$copyStreamOp.Wait(); `
	$downloadedFileStream.Close(); `
	if ($copyStreamOp.Exception -ne $null) { throw $copyStreamOp.Exception } `
	} `
	} else { `
	Throw ("Failed to download " + $source) `
	}`
	} else { `
	$webClient = New-Object System.Net.WebClient; `
	$webClient.DownloadFile($source, $target); `
	} `
	} `
	`
	setx /M PATH $('C:\git\bin;C:\git\usr\bin;'+$Env:PATH+';C:\gcc\bin;C:\go\bin'); `
	`
	Write-Host INFO: Downloading git...; `
	$location='https://github.com/git-for-windows/git/releases/download/v'+$env:GIT_VERSION+'.windows.1/PortableGit-'+$env:GIT_VERSION+'-64-bit.7z.exe'; `
	Download-File $location C:\gitsetup.7z.exe; `
	`
	Write-Host INFO: Downloading go...; `
	Download-File $('https://golang.org/dl/go'+$Env:GO_VERSION+'.windows-amd64.zip') C:\go.zip; `
	`
	Write-Host INFO: Downloading compiler 1 of 3...; `
	Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/gcc.zip C:\gcc.zip; `
	`
	Write-Host INFO: Downloading compiler 2 of 3...; `
	Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/runtime.zip C:\runtime.zip; `
	`
	Write-Host INFO: Downloading compiler 3 of 3...; `
	Download-File https://raw.githubusercontent.com/jhowardmsft/docker-tdmgcc/master/binutils.zip C:\binutils.zip; `
	`
	Write-Host INFO: Installing PS7Zip package...; `
	Install-Package PS7Zip -Force \| Out-Null; `
	Write-Host INFO: Importing PS7Zip...; `
	Import-Module PS7Zip -Force; `
	New-Item C:\git -ItemType Directory \| Out-Null ; `
	cd C:\git; `
	Write-Host INFO: Extracting git...; `
	Expand-7Zip C:\gitsetup.7z.exe \| Out-Null; `
	cd C:\; `
	`
	Write-Host INFO: Expanding go...; `
	Expand-Archive C:\go.zip -DestinationPath C:\; `
	`
	Write-Host INFO: Expanding compiler 1 of 3...; `
	Expand-Archive C:\gcc.zip -DestinationPath C:\gcc -Force; `
	Write-Host INFO: Expanding compiler 2 of 3...; `
	Expand-Archive C:\runtime.zip -DestinationPath C:\gcc -Force; `
	Write-Host INFO: Expanding compiler 3 of 3...; `
	Expand-Archive C:\binutils.zip -DestinationPath C:\gcc -Force; `
	`
	Write-Host INFO: Removing downloaded files...; `
	Remove-Item C:\gcc.zip; `
	Remove-Item C:\runtime.zip; `
	Remove-Item C:\binutils.zip; `
	Remove-Item C:\gitsetup.7z.exe; `
	`
	Write-Host INFO: Creating source directory...; `
	New-Item -ItemType Directory -Path C:\go\src\github.com\docker\docker \| Out-Null; `
	`
	Write-Host INFO: Configuring git core.autocrlf...; `
	C:\git\bin\git config --global core.autocrlf true; `
	`
	Write-Host INFO: Completed

	# Make PowerShell the default entrypoint
	ENTRYPOINT ["powershell.exe"]

	# Set the working directory to the location of the sources
	WORKDIR C:\go\src\github.com\docker\docker

	# Copy the sources into the container
	COPY . .