
            Frequently Asked Questions about ZLIB.DLL


This FAQ is about the design, the rationale, and the use of
ZLIB.DLL. If you have general questions about zlib, you should
check the file "FAQ" found in the zlib distribution, or at the
location http://www.gzip.org/zlib/zlib_faq.html


 1. Why am I having problems using ZLIB.DLL? My application works
    with the static build of zlib just fine, and I didn't make any
    modification when recompiling it for ZLIB.DLL.

  - Make sure you define ZLIB_DLL before including "zlib.h".
    Applications that link to ZLIB.DLL will work properly if
    the source files are compiled in this (or in a compatible)
    way, and the executables are linked to MSVCRT.DLL.


 2. Why do I have to do this? When I use other libraries, I can
    link my code to their static or dynamic versions, without
    needing any source code modification or recompilation.

  - In order to preserve the backwards compatibility with the
    older versions of ZLIB.DLL, and give the ability to use zlib
    to the non-C programmers at the same time, we had to do this
    compromise.


 3. What exactly is this mess about, and why is it happening?

  - It's about the calling convention used for the zlib functions.
    If linked in statically, zlib uses the C (CDECL) convention.
    If linked in dynamically (via ZLIB.DLL), it uses the STDCALL
    convention. The ZLIB_DLL macro switches on the use of STDCALL.

    It happens because we need to preserve compatibility with the
    old releases of ZLIB.DLL that use STDCALL, and, at the same
    time, we must provide support for programmers who use other
    programming languages with bindings that require CDECL.


 4. Why not use the STDCALL convention all the time?
    It's the standard convention in Win32, and I need it in my
    Visual Basic project!

  - Most of the Win32 API functions (without varargs) use indeed
    the STDCALL (WINAPI) convention, but the standard C functions
    use the default CDECL. If one calls Win32 functions such as
    CreateFile(), sometimes it makes sense to decorate one's own
    functions with STDCALL. But if one is aiming at ANSI C or
    POSIX portability, and calls functions such as fopen(), it is
    not a sound decision to include <windows.h> or to use non-ANSI
    constructs only to make one's functions STDCALL-able. This is
    not the biggest problem, however.

    Technically, STDCALL is not bad; it is even a little faster
    than CDECL. The problem of using STDCALL is actually a problem
    of using any explicit calling convention. FASTCALL falls into
    the same category.

    Explicit specification of calling conventions, whether it's
    direct or indirect via a macro, happens commonly in Windows,
    but it is regarded as a noisy, non-standard C quirk on other
    platforms. It isn't possible to write an ANSI C -conforming
    program, for example, if it is necessary to specify calling
    conventions. Libraries can hide the dirty stuff in header
    files, under macros, but callbacks will still remain exposed.
    This is why the zlib callbacks will not be decorated.
    (The old Windows callbacks, such as WndProc, are decorated,
    but the newer ones are not.)

    There is one more problem with explicit, non-default calling
    conventions: the ability to use zlib in other programming
    languages. Some of them, like Ada (GNAT) and Fortran (GNU G77)
    have C bindings implemented initially on Unix, hence relying
    on the C calling convention.

    So we are decorating the functions using STDCALL in ZLIB.DLL
    to maintain compatibility with the old versions, but we are
    using the default CDECL in the static library, to allow other
    programming languages to use zlib in a portable fashion, via
    C bindings.


 5. Why not use the default (CDECL) convention all the time?
    It's the standard convention in C, and I need it in my Ada
    project!

  - Originally, ZLIB.DLL was intended to run under Visual Basic,
    and VB6 and earlier need STDCALL.

    We admit that cluttering the main zlib sources, for the sake
    of interfacing with Visual Basic and at the expense of other
    programming languages, is not fair. It would have been better
    to maintain a "VB-only" project in the contrib/ directory, and
    to build a custom ZLIBVB.DLL, for example -- as we did with
    the Delphi projects. Another possible solution would have been
    to build STDCALL wrappers around the CDECL-exported functions.

    But this was the accident that we have to live with, in order
    to maintain binary compatibility with the older versions of
    ZLIB.DLL.


 6. If my application uses ZLIB.DLL, do I have to link it to
    MSVCRT.DLL? Why?

  - The executables (.EXE, .DLL, etc.) that are involved in the
    same process and are using the C run-time library (i.e. they
    are calling any standard C function), must link to the same
    library. There are several libraries in the Win32 system:
    CRTDLL.DLL, MSVCRT.DLL, the static C libraries, etc.
    Since ZLIB.DLL is linked to MSVCRT.DLL, the executables that
    depend on it must also link to MSVCRT.DLL.


 7. Why are you saying that ZLIB.DLL and my application must be
    linked to the same C run-time library (CRT)? I linked my
    application and my DLLs to different C libraries (e.g. my
    application to a static library, and my DLLs to MSVCRT.DLL),
    and everything works fine.

  - If a library invokes only pure Win32 API (i.e. accessible
    via <windows.h>), its DLL build will work in any context.
    But if a library invokes standard C functions, things get
    more complicated.

    There is a single Win32 library in a Win32 system. Every
    function in this library resides in a single DLL module, that
    is safe to call from anywhere. On the other hand, there are
    multiple versions of the C library that are all at the same
    time in the system, and all of them have internal states,
    therefore it is dangerous to intermix them with each other.

    Intermixing multiple C libraries is possible, as long as their
    internal states are kept intact. The Microsoft Knowledge Base
    article Q140584 "HOWTO: Link with the Correct C Run-Time (CRT)
    Library" enumerates some of the potential problems raised by
    intermixing, but does not offer a complete description of how
    to avoid them, except by advising not to mix the C libraries.
    If you can send us more information about this issue, we will
    highly appreciate it. (But please do NOT send us source code
    from Microsoft, even if it comes with your legitimate copy of
    Visual C++!)

    If this kind of intermixing works for you, it's because your
    application and DLLs are avoiding the corruption of the CRT's
    internal states, due to a fortunate accident. It's not because
    those libraries really work together.

    Also note that linking ZLIB.DLL to non-Microsoft C libraries
    (such as Borland's) raises similar problems.


 8. Why are you linking ZLIB.DLL to MSVCRT.DLL?

  - MSVCRT.DLL exists on every Windows 95 with a new service pack
    installed, or with Microsoft Internet Explorer 4 or later, and
    on all other Windows 4.x or later (Windows 98, Windows NT 4,
    or later). It is freely distributable; if not present in the
    system, it can be downloaded from Microsoft or from other
    software provider for free.

    The fact that MSVCRT.DLL does not exist on a virgin Windows 95
    is not so problematic. The number of Windows 95 installations
    is rapidly decreasing, Microsoft stopped supporting it a long
    time ago, and many recent applications from various vendors
    including Microsoft, do not even run on it. Even without these
    arguments, no serious user should run Windows 95 without a
    proper update installed.

    There is also the fact that the mainstream C compilers for
    Windows are Microsoft Visual C++ 6.0, and gcc/MinGW. Both
    are producing executables that link to MSVCRT.DLL by default,
    without offering other dynamic CRTs as alternatives easy to
    select by users.


 9. Why are you not linking ZLIB.DLL to
    <<my favorite C run-time library>> ?

  - We considered and abandoned the following alternatives:

    * Linking ZLIB.DLL to a static C library (LIBC.LIB, or
      LIBCMT.LIB) is not a good option. People are using ZLIB.DLL
      mainly to save disk space. If you are linking your program
      to a static C library, you may as well consider linking zlib
      in statically, too.

    * Linking ZLIB.DLL to CRTDLL.DLL looks very appealing,
      because CRTDLL.DLL is present on every Win32 installation.
      Unfortunately, it has a series of problems: it raises
      difficulties when linking to the Microsoft C++ libraries,
      it is not thread-safe, and Microsoft has discontinued its
      support a long time ago.

    * Linking ZLIB.DLL to MSVCRT70.DLL, supplied with the
      Microsoft .NET platform and Visual C++ 7.0, is not a good
      option. Although it can be downloaded and distributed
      freely, it is hardly present on today's Win32 installations.
      If it will become more popular than MSVCRT.DLL, and will be
      pre-installed on the future Win32 systems, we will probably
      think again about it.

    * Linking ZLIB.DLL to NTDLL.DLL is not possible.
      NTDLL.DLL exports only a part of the C library, and only
      on Windows NT systems.


10. I understand your reasons. However, my project needs ZLIB.DLL
    linked to something different than MSVCRT.DLL. What can I do?

    Feel free to rebuild this DLL from the zlib sources, and link
    it the way you want. It is required, however, to clearly
    state that your build is unofficial. Another thing that is not
    required, but highly recommended, is to name that custom DLL
    differently, and/or to install it in a private directory that
    can be accessed by your application, but is not visible to the
    others (e.g. it's not the SYSTEM or the SYSTEM32 directory,
    and it's not in the PATH). Otherwise, your build may clash
    with applications that link to the official build.

    For example, in Cygwin, zlib is linked to their runtime
    CYGWIN1.DLL, and it is distributed under the name CYGZ.DLL.


11. My I include additional pieces of code that I find useful,
    link them in ZLIB.DLL, and export them?

    No. A legitimate build of ZLIB.DLL must not include code that
    does not originate from the official zlib sources. But you can
    make your own private build, and give it a different name, as
    suggested in the previous answer.

    For example, in Borland Delphi and C++ Builder, zlib is part
    of the standard VCL library. If an application links to VCL
    dynamically, the name of the distributable binary (VCLxx.DLL)
    does not posess any danger of clashing with a legitimate but
    incompatible ZLIB.DLL.


12. I see that I may have all kinds of problems if I use ZLIB.DLL.
    Do you recommend to link zlib in statically? Do I get rid of
    problems?

  - Yes, definitely. In fact, unless you are distributing a large
    number of executables, each of them linking to zlib, you will
    save space by linking zlib in statically (assuming that you
    would otherwise distribute ZLIB.DLL with your application).
    zlib is not a big library, and the space saved by ZLIB.DLL is
    little. Much of the actual size of the DLL is due to the 4KB
    alignment in the binary.

    But you may have reasons, other than size, to use the DLL.
    That is entirely up to you.