fuchsia / third_party / github.com / madler / zlib / 296967c7b7b6bfb59ed8b831391359b2c0153e3d / . / examples / enough.c

/* enough.c -- determine the maximum size of inflate's Huffman code tables over | |

* all possible valid and complete prefix codes, subject to a length limit. | |

* Copyright (C) 2007, 2008, 2012, 2018 Mark Adler | |

* Version 1.5 5 August 2018 Mark Adler | |

*/ | |

/* Version history: | |

1.0 3 Jan 2007 First version (derived from codecount.c version 1.4) | |

1.1 4 Jan 2007 Use faster incremental table usage computation | |

Prune examine() search on previously visited states | |

1.2 5 Jan 2007 Comments clean up | |

As inflate does, decrease root for short codes | |

Refuse cases where inflate would increase root | |

1.3 17 Feb 2008 Add argument for initial root table size | |

Fix bug for initial root table size == max - 1 | |

Use a macro to compute the history index | |

1.4 18 Aug 2012 Avoid shifts more than bits in type (caused endless loop!) | |

Clean up comparisons of different types | |

Clean up code indentation | |

1.5 5 Aug 2018 Clean up code style, formatting, and comments | |

Show all the codes for the maximum, and only the maximum | |

*/ | |

/* | |

Examine all possible prefix codes for a given number of symbols and a | |

maximum code length in bits to determine the maximum table size for zlib's | |

inflate. Only complete prefix codes are counted. | |

Two codes are considered distinct if the vectors of the number of codes per | |

length are not identical. So permutations of the symbol assignments result | |

in the same code for the counting, as do permutations of the assignments of | |

the bit values to the codes (i.e. only canonical codes are counted). | |

We build a code from shorter to longer lengths, determining how many symbols | |

are coded at each length. At each step, we have how many symbols remain to | |

be coded, what the last code length used was, and how many bit patterns of | |

that length remain unused. Then we add one to the code length and double the | |

number of unused patterns to graduate to the next code length. We then | |

assign all portions of the remaining symbols to that code length that | |

preserve the properties of a correct and eventually complete code. Those | |

properties are: we cannot use more bit patterns than are available; and when | |

all the symbols are used, there are exactly zero possible bit patterns left | |

unused. | |

The inflate Huffman decoding algorithm uses two-level lookup tables for | |

speed. There is a single first-level table to decode codes up to root bits | |

in length (root == 9 for literal/length codes and root == 6 for distance | |

codes, in the current inflate implementation). The base table has 1 << root | |

entries and is indexed by the next root bits of input. Codes shorter than | |

root bits have replicated table entries, so that the correct entry is | |

pointed to regardless of the bits that follow the short code. If the code is | |

longer than root bits, then the table entry points to a second-level table. | |

The size of that table is determined by the longest code with that root-bit | |

prefix. If that longest code has length len, then the table has size 1 << | |

(len - root), to index the remaining bits in that set of codes. Each | |

subsequent root-bit prefix then has its own sub-table. The total number of | |

table entries required by the code is calculated incrementally as the number | |

of codes at each bit length is populated. When all of the codes are shorter | |

than root bits, then root is reduced to the longest code length, resulting | |

in a single, smaller, one-level table. | |

The inflate algorithm also provides for small values of root (relative to | |

the log2 of the number of symbols), where the shortest code has more bits | |

than root. In that case, root is increased to the length of the shortest | |

code. This program, by design, does not handle that case, so it is verified | |

that the number of symbols is less than 1 << (root + 1). | |

In order to speed up the examination (by about ten orders of magnitude for | |

the default arguments), the intermediate states in the build-up of a code | |

are remembered and previously visited branches are pruned. The memory | |

required for this will increase rapidly with the total number of symbols and | |

the maximum code length in bits. However this is a very small price to pay | |

for the vast speedup. | |

First, all of the possible prefix codes are counted, and reachable | |

intermediate states are noted by a non-zero count in a saved-results array. | |

Second, the intermediate states that lead to (root + 1) bit or longer codes | |

are used to look at all sub-codes from those junctures for their inflate | |

memory usage. (The amount of memory used is not affected by the number of | |

codes of root bits or less in length.) Third, the visited states in the | |

construction of those sub-codes and the associated calculation of the table | |

size is recalled in order to avoid recalculating from the same juncture. | |

Beginning the code examination at (root + 1) bit codes, which is enabled by | |

identifying the reachable nodes, accounts for about six of the orders of | |

magnitude of improvement for the default arguments. About another four | |

orders of magnitude come from not revisiting previous states. Out of | |

approximately 2x10^16 possible prefix codes, only about 2x10^6 sub-codes | |

need to be examined to cover all of the possible table memory usage cases | |

for the default arguments of 286 symbols limited to 15-bit codes. | |

Note that the uintmax_t type is used for counting. It is quite easy to | |

exceed the capacity of an eight-byte integer with a large number of symbols | |

and a large maximum code length, so multiple-precision arithmetic would need | |

to replace the integer arithmetic in that case. This program will abort if | |

an overflow occurs. The big_t type identifies where the counting takes | |

place. | |

The uintmax_t type is also used for calculating the number of possible codes | |

remaining at the maximum length. This limits the maximum code length to the | |

number of bits in a long long minus the number of bits needed to represent | |

the symbols in a flat code. The code_t type identifies where the bit-pattern | |

counting takes place. | |

*/ | |

#include <stdio.h> | |

#include <stdlib.h> | |

#include <string.h> | |

#include <stdarg.h> | |

#include <stdint.h> | |

#include <assert.h> | |

#define local static | |

// Special data types. | |

typedef uintmax_t big_t; // type for code counting | |

#define PRIbig "ju" // printf format for big_t | |

typedef uintmax_t code_t; // type for bit pattern counting | |

struct tab { // type for been-here check | |

size_t len; // allocated length of bit vector in octets | |

char *vec; // allocated bit vector | |

}; | |

/* The array for saving results, num[], is indexed with this triplet: | |

syms: number of symbols remaining to code | |

left: number of available bit patterns at length len | |

len: number of bits in the codes currently being assigned | |

Those indices are constrained thusly when saving results: | |

syms: 3..totsym (totsym == total symbols to code) | |

left: 2..syms - 1, but only the evens (so syms == 8 -> 2, 4, 6) | |

len: 1..max - 1 (max == maximum code length in bits) | |

syms == 2 is not saved since that immediately leads to a single code. left | |

must be even, since it represents the number of available bit patterns at | |

the current length, which is double the number at the previous length. left | |

ends at syms-1 since left == syms immediately results in a single code. | |

(left > sym is not allowed since that would result in an incomplete code.) | |

len is less than max, since the code completes immediately when len == max. | |

The offset into the array is calculated for the three indices with the first | |

one (syms) being outermost, and the last one (len) being innermost. We build | |

the array with length max-1 lists for the len index, with syms-3 of those | |

for each symbol. There are totsym-2 of those, with each one varying in | |

length as a function of sym. See the calculation of index in map() for the | |

index, and the calculation of size in main() for the size of the array. | |

For the deflate example of 286 symbols limited to 15-bit codes, the array | |

has 284,284 entries, taking up 2.17 MB for an 8-byte big_t. More than half | |

of the space allocated for saved results is actually used -- not all | |

possible triplets are reached in the generation of valid prefix codes. | |

*/ | |

/* The array for tracking visited states, done[], is itself indexed identically | |

to the num[] array as described above for the (syms, left, len) triplet. | |

Each element in the array is further indexed by the (mem, rem) doublet, | |

where mem is the amount of inflate table space used so far, and rem is the | |

remaining unused entries in the current inflate sub-table. Each indexed | |

element is simply one bit indicating whether the state has been visited or | |

not. Since the ranges for mem and rem are not known a priori, each bit | |

vector is of a variable size, and grows as needed to accommodate the visited | |

states. mem and rem are used to calculate a single index in a triangular | |

array. Since the range of mem is expected in the default case to be about | |

ten times larger than the range of rem, the array is skewed to reduce the | |

memory usage, with eight times the range for mem than for rem. See the | |

calculations for offset and bit in been_here() for the details. | |

For the deflate example of 286 symbols limited to 15-bit codes, the bit | |

vectors grow to total 5.5 MB, in addition to the 4.3 MB done array itself. | |

*/ | |

// Type for a variable-length, allocated string. | |

typedef struct { | |

char *str; // pointer to allocated string | |

size_t size; // size of allocation | |

size_t len; // length of string, not including terminating zero | |

} string_t; | |

// Clear a string_t. | |

local void string_clear(string_t *s) { | |

s->str[0] = 0; | |

s->len = 0; | |

} | |

// Initialize a string_t. | |

local void string_init(string_t *s) { | |

s->size = 16; | |

s->str = malloc(s->size); | |

assert(s->str != NULL && "out of memory"); | |

string_clear(s); | |

} | |

// Release the allocation of a string_t. | |

local void string_free(string_t *s) { | |

free(s->str); | |

s->str = NULL; | |

s->size = 0; | |

s->len = 0; | |

} | |

// Save the results of printf with fmt and the subsequent argument list to s. | |

// Each call appends to s. The allocated space for s is increased as needed. | |

local void string_printf(string_t *s, char *fmt, ...) { | |

va_list ap; | |

va_start(ap, fmt); | |

size_t len = s->len; | |

int ret = vsnprintf(s->str + len, s->size - len, fmt, ap); | |

assert(ret >= 0 && "out of memory"); | |

s->len += ret; | |

if (s->size < s->len + 1) { | |

do { | |

s->size <<= 1; | |

assert(s->size != 0 && "overflow"); | |

} while (s->size < s->len + 1); | |

s->str = realloc(s->str, s->size); | |

assert(s->str != NULL && "out of memory"); | |

vsnprintf(s->str + len, s->size - len, fmt, ap); | |

} | |

va_end(ap); | |

} | |

// Globals to avoid propagating constants or constant pointers recursively. | |

struct { | |

int max; // maximum allowed bit length for the codes | |

int root; // size of base code table in bits | |

int large; // largest code table so far | |

size_t size; // number of elements in num and done | |

big_t tot; // total number of codes with maximum tables size | |

string_t out; // display of subcodes for maximum tables size | |

int *code; // number of symbols assigned to each bit length | |

big_t *num; // saved results array for code counting | |

struct tab *done; // states already evaluated array | |

} g; | |

// Index function for num[] and done[]. | |

local inline size_t map(int syms, int left, int len) { | |

return ((size_t)((syms - 1) >> 1) * ((syms - 2) >> 1) + | |

(left >> 1) - 1) * (g.max - 1) + | |

len - 1; | |

} | |

// Free allocated space in globals. | |

local void cleanup(void) { | |

if (g.done != NULL) { | |

for (size_t n = 0; n < g.size; n++) | |

if (g.done[n].len) | |

free(g.done[n].vec); | |

g.size = 0; | |

free(g.done); g.done = NULL; | |

} | |

free(g.num); g.num = NULL; | |

free(g.code); g.code = NULL; | |

string_free(&g.out); | |

} | |

// Return the number of possible prefix codes using bit patterns of lengths len | |

// through max inclusive, coding syms symbols, with left bit patterns of length | |

// len unused -- return -1 if there is an overflow in the counting. Keep a | |

// record of previous results in num to prevent repeating the same calculation. | |

local big_t count(int syms, int left, int len) { | |

// see if only one possible code | |

if (syms == left) | |

return 1; | |

// note and verify the expected state | |

assert(syms > left && left > 0 && len < g.max); | |

// see if we've done this one already | |

size_t index = map(syms, left, len); | |

big_t got = g.num[index]; | |

if (got) | |

return got; // we have -- return the saved result | |

// we need to use at least this many bit patterns so that the code won't be | |

// incomplete at the next length (more bit patterns than symbols) | |

int least = (left << 1) - syms; | |

if (least < 0) | |

least = 0; | |

// we can use at most this many bit patterns, lest there not be enough | |

// available for the remaining symbols at the maximum length (if there were | |

// no limit to the code length, this would become: most = left - 1) | |

int most = (((code_t)left << (g.max - len)) - syms) / | |

(((code_t)1 << (g.max - len)) - 1); | |

// count all possible codes from this juncture and add them up | |

big_t sum = 0; | |

for (int use = least; use <= most; use++) { | |

got = count(syms - use, (left - use) << 1, len + 1); | |

sum += got; | |

if (got == (big_t)-1 || sum < got) // overflow | |

return (big_t)-1; | |

} | |

// verify that all recursive calls are productive | |

assert(sum != 0); | |

// save the result and return it | |

g.num[index] = sum; | |

return sum; | |

} | |

// Return true if we've been here before, set to true if not. Set a bit in a | |

// bit vector to indicate visiting this state. Each (syms,len,left) state has a | |

// variable size bit vector indexed by (mem,rem). The bit vector is lengthened | |

// as needed to allow setting the (mem,rem) bit. | |

local int been_here(int syms, int left, int len, int mem, int rem) { | |

// point to vector for (syms,left,len), bit in vector for (mem,rem) | |

size_t index = map(syms, left, len); | |

mem -= 1 << g.root; // mem always includes the root table | |

mem >>= 1; // mem and rem are always even | |

rem >>= 1; | |

size_t offset = (mem >> 3) + rem; | |

offset = ((offset * (offset + 1)) >> 1) + rem; | |

int bit = 1 << (mem & 7); | |

// see if we've been here | |

size_t length = g.done[index].len; | |

if (offset < length && (g.done[index].vec[offset] & bit) != 0) | |

return 1; // done this! | |

// we haven't been here before -- set the bit to show we have now | |

// see if we need to lengthen the vector in order to set the bit | |

if (length <= offset) { | |

// if we have one already, enlarge it, zero out the appended space | |

char *vector; | |

if (length) { | |

do { | |

length <<= 1; | |

} while (length <= offset); | |

vector = realloc(g.done[index].vec, length); | |

assert(vector != NULL && "out of memory"); | |

memset(vector + g.done[index].len, 0, length - g.done[index].len); | |

} | |

// otherwise we need to make a new vector and zero it out | |

else { | |

length = 16; | |

while (length <= offset) | |

length <<= 1; | |

vector = calloc(length, 1); | |

assert(vector != NULL && "out of memory"); | |

} | |

// install the new vector | |

g.done[index].len = length; | |

g.done[index].vec = vector; | |

} | |

// set the bit | |

g.done[index].vec[offset] |= bit; | |

return 0; | |

} | |

// Examine all possible codes from the given node (syms, len, left). Compute | |

// the amount of memory required to build inflate's decoding tables, where the | |

// number of code structures used so far is mem, and the number remaining in | |

// the current sub-table is rem. | |

local void examine(int syms, int left, int len, int mem, int rem) { | |

// see if we have a complete code | |

if (syms == left) { | |

// set the last code entry | |

g.code[len] = left; | |

// complete computation of memory used by this code | |

while (rem < left) { | |

left -= rem; | |

rem = 1 << (len - g.root); | |

mem += rem; | |

} | |

assert(rem == left); | |

// if this is at the maximum, show the sub-code | |

if (mem >= g.large) { | |

// if this is a new maximum, update the maximum and clear out the | |

// printed sub-codes from the previous maximum | |

if (mem > g.large) { | |

g.large = mem; | |

string_clear(&g.out); | |

} | |

// compute the starting state for this sub-code | |

syms = 0; | |

left = 1 << g.max; | |

for (int bits = g.max; bits > g.root; bits--) { | |

syms += g.code[bits]; | |

left -= g.code[bits]; | |

assert((left & 1) == 0); | |

left >>= 1; | |

} | |

// print the starting state and the resulting sub-code to g.out | |

string_printf(&g.out, "<%u, %u, %u>:", | |

syms, g.root + 1, ((1 << g.root) - left) << 1); | |

for (int bits = g.root + 1; bits <= g.max; bits++) | |

if (g.code[bits]) | |

string_printf(&g.out, " %d[%d]", g.code[bits], bits); | |

string_printf(&g.out, "\n"); | |

} | |

// remove entries as we drop back down in the recursion | |

g.code[len] = 0; | |

return; | |

} | |

// prune the tree if we can | |

if (been_here(syms, left, len, mem, rem)) | |

return; | |

// we need to use at least this many bit patterns so that the code won't be | |

// incomplete at the next length (more bit patterns than symbols) | |

int least = (left << 1) - syms; | |

if (least < 0) | |

least = 0; | |

// we can use at most this many bit patterns, lest there not be enough | |

// available for the remaining symbols at the maximum length (if there were | |

// no limit to the code length, this would become: most = left - 1) | |

int most = (((code_t)left << (g.max - len)) - syms) / | |

(((code_t)1 << (g.max - len)) - 1); | |

// occupy least table spaces, creating new sub-tables as needed | |

int use = least; | |

while (rem < use) { | |

use -= rem; | |

rem = 1 << (len - g.root); | |

mem += rem; | |

} | |

rem -= use; | |

// examine codes from here, updating table space as we go | |

for (use = least; use <= most; use++) { | |

g.code[len] = use; | |

examine(syms - use, (left - use) << 1, len + 1, | |

mem + (rem ? 1 << (len - g.root) : 0), rem << 1); | |

if (rem == 0) { | |

rem = 1 << (len - g.root); | |

mem += rem; | |

} | |

rem--; | |

} | |

// remove entries as we drop back down in the recursion | |

g.code[len] = 0; | |

} | |

// Look at all sub-codes starting with root + 1 bits. Look at only the valid | |

// intermediate code states (syms, left, len). For each completed code, | |

// calculate the amount of memory required by inflate to build the decoding | |

// tables. Find the maximum amount of memory required and show the codes that | |

// require that maximum. | |

local void enough(int syms) { | |

// clear code | |

for (int n = 0; n <= g.max; n++) | |

g.code[n] = 0; | |

// look at all (root + 1) bit and longer codes | |

string_clear(&g.out); // empty saved results | |

g.large = 1 << g.root; // base table | |

if (g.root < g.max) // otherwise, there's only a base table | |

for (int n = 3; n <= syms; n++) | |

for (int left = 2; left < n; left += 2) { | |

// look at all reachable (root + 1) bit nodes, and the | |

// resulting codes (complete at root + 2 or more) | |

size_t index = map(n, left, g.root + 1); | |

if (g.root + 1 < g.max && g.num[index]) // reachable node | |

examine(n, left, g.root + 1, 1 << g.root, 0); | |

// also look at root bit codes with completions at root + 1 | |

// bits (not saved in num, since complete), just in case | |

if (g.num[index - 1] && n <= left << 1) | |

examine((n - left) << 1, (n - left) << 1, g.root + 1, | |

1 << g.root, 0); | |

} | |

// done | |

printf("maximum of %d table entries for root = %d\n", g.large, g.root); | |

fputs(g.out.str, stdout); | |

} | |

// Examine and show the total number of possible prefix codes for a given | |

// maximum number of symbols, initial root table size, and maximum code length | |

// in bits -- those are the command arguments in that order. The default values | |

// are 286, 9, and 15 respectively, for the deflate literal/length code. The | |

// possible codes are counted for each number of coded symbols from two to the | |

// maximum. The counts for each of those and the total number of codes are | |

// shown. The maximum number of inflate table entires is then calculated across | |

// all possible codes. Each new maximum number of table entries and the | |

// associated sub-code (starting at root + 1 == 10 bits) is shown. | |

// | |

// To count and examine prefix codes that are not length-limited, provide a | |

// maximum length equal to the number of symbols minus one. | |

// | |

// For the deflate literal/length code, use "enough". For the deflate distance | |

// code, use "enough 30 6". | |

int main(int argc, char **argv) { | |

// set up globals for cleanup() | |

g.code = NULL; | |

g.num = NULL; | |

g.done = NULL; | |

string_init(&g.out); | |

// get arguments -- default to the deflate literal/length code | |

int syms = 286; | |

g.root = 9; | |

g.max = 15; | |

if (argc > 1) { | |

syms = atoi(argv[1]); | |

if (argc > 2) { | |

g.root = atoi(argv[2]); | |

if (argc > 3) | |

g.max = atoi(argv[3]); | |

} | |

} | |

if (argc > 4 || syms < 2 || g.root < 1 || g.max < 1) { | |

fputs("invalid arguments, need: [sym >= 2 [root >= 1 [max >= 1]]]\n", | |

stderr); | |

return 1; | |

} | |

// if not restricting the code length, the longest is syms - 1 | |

if (g.max > syms - 1) | |

g.max = syms - 1; | |

// determine the number of bits in a code_t | |

int bits = 0; | |

for (code_t word = 1; word; word <<= 1) | |

bits++; | |

// make sure that the calculation of most will not overflow | |

if (g.max > bits || (code_t)(syms - 2) >= ((code_t)-1 >> (g.max - 1))) { | |

fputs("abort: code length too long for internal types\n", stderr); | |

return 1; | |

} | |

// reject impossible code requests | |

if ((code_t)(syms - 1) > ((code_t)1 << g.max) - 1) { | |

fprintf(stderr, "%d symbols cannot be coded in %d bits\n", | |

syms, g.max); | |

return 1; | |

} | |

// allocate code vector | |

g.code = calloc(g.max + 1, sizeof(int)); | |

assert(g.code != NULL && "out of memory"); | |

// determine size of saved results array, checking for overflows, | |

// allocate and clear the array (set all to zero with calloc()) | |

if (syms == 2) // iff max == 1 | |

g.num = NULL; // won't be saving any results | |

else { | |

g.size = syms >> 1; | |

int n = (syms - 1) >> 1; | |

assert(g.size <= (size_t)-1 / n && "overflow"); | |

g.size *= n; | |

n = g.max - 1; | |

assert(g.size <= (size_t)-1 / n && "overflow"); | |

g.size *= n; | |

g.num = calloc(g.size, sizeof(big_t)); | |

assert(g.num != NULL && "out of memory"); | |

} | |

// count possible codes for all numbers of symbols, add up counts | |

big_t sum = 0; | |

for (int n = 2; n <= syms; n++) { | |

big_t got = count(n, 2, 1); | |

sum += got; | |

assert(got != (big_t)-1 && sum >= got && "overflow"); | |

} | |

printf("%"PRIbig" total codes for 2 to %d symbols", sum, syms); | |

if (g.max < syms - 1) | |

printf(" (%d-bit length limit)\n", g.max); | |

else | |

puts(" (no length limit)"); | |

// allocate and clear done array for been_here() | |

if (syms == 2) | |

g.done = NULL; | |

else { | |

g.done = calloc(g.size, sizeof(struct tab)); | |

assert(g.done != NULL && "out of memory"); | |

} | |

// find and show maximum inflate table usage | |

if (g.root > g.max) // reduce root to max length | |

g.root = g.max; | |

if ((code_t)syms < ((code_t)1 << (g.root + 1))) | |

enough(syms); | |

else | |

fputs("cannot handle minimum code lengths > root", stderr); | |

// done | |

cleanup(); | |

return 0; | |

} |