diff --git a/ChangeLog b/ChangeLog
index f310bb0..a4e5384 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,12 +1,57 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
 Changes in 1.2.5 (19 Apr 2010)
 - Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
 - Default to libdir as sharedlibdir in configure [Nieder]
 - Update copyright dates on modified source files
 - Update trees.c to be able to generate modified trees.h
 - Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
 
 Changes in 1.2.4.5 (18 Apr 2010)
 - Set sharedlibdir in configure [Torok]
@@ -261,7 +306,7 @@
 - Clear bytes after deflate lookahead to avoid use of uninitialized data
 - Change a limit in inftrees.c to be more transparent to Coverity Prevent
 - Update win32/zlib.def with exported symbols from zlib.h
-- Correct spelling error in zlib.h [Willem]
+- Correct spelling errors in zlib.h [Willem, Sobrado]
 - Allow Z_BLOCK for deflate() to force a new block
 - Allow negative bits in inflatePrime() to delete existing bit buffer
 - Add Z_TREES flush option to inflate() to return at end of trees
diff --git a/FAQ b/FAQ
index 1a22750..03676dd 100644
--- a/FAQ
+++ b/FAQ
@@ -84,8 +84,10 @@
 
 13. How can I make a Unix shared library?
 
-    make clean
-    ./configure -s
+    By default a shared (and a static) library is built for Unix.  So:
+
+    make distclean
+    ./configure
     make
 
 14. How do I install a shared zlib library on Unix?
@@ -325,7 +327,7 @@
     correctly points to the zlib specification in RFC 1950 for the "deflate"
     transfer encoding, there have been reports of servers and browsers that
     incorrectly produce or expect raw deflate data per the deflate
-    specficiation in RFC 1951, most notably Microsoft.  So even though the
+    specification in RFC 1951, most notably Microsoft.  So even though the
     "deflate" transfer encoding using the zlib format would be the more
     efficient approach (and in fact exactly what the zlib format was designed
     for), using the "gzip" transfer encoding is probably more reliable due to
diff --git a/INDEX b/INDEX
index f6c51ca..791f6ab 100644
--- a/INDEX
+++ b/INDEX
@@ -17,6 +17,7 @@
 zlib2ansi       perl script to convert source files for C++ compilation
 
 amiga/          makefiles for Amiga SAS C
+as400/		makefiles for AS/400
 doc/            documentation for formats and algorithms
 msdos/          makefiles for MSDOS
 nintendods/     makefile for Nintendo DS
diff --git a/Makefile.in b/Makefile.in
index 5b15bd0..861970d 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,5 +1,5 @@
 # Makefile for zlib
-# Copyright (C) 1995-2010 Jean-loup Gailly.
+# Copyright (C) 1995-2011 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
@@ -32,7 +32,7 @@
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.5
+SHAREDLIBV=libz.so.1.2.5.1
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)
 
@@ -136,7 +136,7 @@
 	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
 	-@mv objs/$*.o $@
 
-$(SHAREDLIBV): $(PIC_OBJS)
+placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
 	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
 	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
@@ -168,14 +168,16 @@
 	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
 	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
 	cp $(STATICLIB) $(DESTDIR)$(libdir)
-	cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)
-	cd $(DESTDIR)$(libdir); chmod u=rw,go=r $(STATICLIB)
-	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	-@cd $(DESTDIR)$(sharedlibdir); if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
-	  chmod 755 $(SHAREDLIBV); \
-	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
+	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
+	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
+	-@if test -n "$(SHAREDLIBV)"; then \
+	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
+	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
+	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
+	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
+	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
+	  ln -s $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
 	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
 	fi
 	cp zlib.3 $(DESTDIR)$(man3dir)
@@ -193,7 +195,7 @@
 uninstall:
 	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
 	cd $(DESTDIR)$(libdir); rm -f libz.a; \
-	if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
 	cd $(DESTDIR)$(man3dir); rm -f zlib.3
diff --git a/README b/README
index d4219bf..7870cc2 100644
--- a/README
+++ b/README
@@ -1,10 +1,10 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.5 is a general purpose data compression library.  All the code is
+zlib 1.2.5.1 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
-and rfc1952.txt (gzip format).
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
+rfc1952 (gzip format).
 
 All functions of the compression library are documented in the file zlib.h
 (volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
@@ -31,7 +31,7 @@
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.5 are documented in the file ChangeLog.
+The changes made in version 1.2.5.1 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -84,7 +84,7 @@
 
 Copyright notice:
 
- (C) 1995-2010 Jean-loup Gailly and Mark Adler
+ (C) 1995-2011 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
diff --git a/adler32.c b/adler32.c
index 65ad6a5..a868f07 100644
--- a/adler32.c
+++ b/adler32.c
@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2007 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,9 +9,9 @@
 
 #define local static
 
-local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 
-#define BASE 65521UL    /* largest prime smaller than 65536 */
+#define BASE 65521      /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
@@ -21,39 +21,44 @@
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
-/* use NO_DIVIDE if your processor does not do division in hardware */
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
 #ifdef NO_DIVIDE
-#  define MOD(a) \
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
     do { \
-        if (a >= (BASE << 16)) a -= (BASE << 16); \
-        if (a >= (BASE << 15)) a -= (BASE << 15); \
-        if (a >= (BASE << 14)) a -= (BASE << 14); \
-        if (a >= (BASE << 13)) a -= (BASE << 13); \
-        if (a >= (BASE << 12)) a -= (BASE << 12); \
-        if (a >= (BASE << 11)) a -= (BASE << 11); \
-        if (a >= (BASE << 10)) a -= (BASE << 10); \
-        if (a >= (BASE << 9)) a -= (BASE << 9); \
-        if (a >= (BASE << 8)) a -= (BASE << 8); \
-        if (a >= (BASE << 7)) a -= (BASE << 7); \
-        if (a >= (BASE << 6)) a -= (BASE << 6); \
-        if (a >= (BASE << 5)) a -= (BASE << 5); \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        unsigned long tmp = a >> 16; \
+        a &= 0xffffUL; \
+        a += (tmp << 4) - tmp; \
+    } while (0)
+#  define MOD28(a) \
+    do { \
+        CHOP(a); \
         if (a >= BASE) a -= BASE; \
     } while (0)
-#  define MOD4(a) \
+#  define MOD(a) \
     do { \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        CHOP(a); \
+        MOD28(a); \
+    } while (0)
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
         if (a >= BASE) a -= BASE; \
     } while (0)
 #else
 #  define MOD(a) a %= BASE
-#  define MOD4(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
 #endif
 
 /* ========================================================================= */
@@ -92,7 +97,7 @@
         }
         if (adler >= BASE)
             adler -= BASE;
-        MOD4(sum2);             /* only added so many BASE's */
+        MOD28(sum2);            /* only added so many BASE's */
         return adler | (sum2 << 16);
     }
 
@@ -137,8 +142,13 @@
     unsigned long sum2;
     unsigned rem;
 
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
     /* the derivation of this formula is left as an exercise for the reader */
-    rem = (unsigned)(len2 % BASE);
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
     sum1 = adler1 & 0xffff;
     sum2 = rem * sum1;
     MOD(sum2);
diff --git a/old/as400/bndsrc b/as400/bndsrc
similarity index 71%
rename from old/as400/bndsrc
rename to as400/bndsrc
index 9cf94bb..06c3f43 100644
--- a/old/as400/bndsrc
+++ b/as400/bndsrc
@@ -34,6 +34,7 @@
   EXPORT SYMBOL("deflateCopy")
   EXPORT SYMBOL("deflateReset")
   EXPORT SYMBOL("deflateParams")
+  EXPORT SYMBOL("deflatePending")
   EXPORT SYMBOL("deflatePrime")
   EXPORT SYMBOL("deflateInit_")
   EXPORT SYMBOL("deflateInit2_")
@@ -129,4 +130,54 @@
 
   EXPORT SYMBOL("zlibCompileFlags")
 
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.5 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      ADLER32      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("adler32_combine")
+  EXPORT SYMBOL("adler32_combine64")
+
+/********************************************************************/
+/*   *MODULE      CRC32        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("crc32_combine")
+  EXPORT SYMBOL("crc32_combine64")
+
+/********************************************************************/
+/*   *MODULE      GZLIB        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzbuffer")
+  EXPORT SYMBOL("gzoffset")
+  EXPORT SYMBOL("gzoffset64")
+  EXPORT SYMBOL("gzopen64")
+  EXPORT SYMBOL("gzseek64")
+  EXPORT SYMBOL("gztell64")
+
+/********************************************************************/
+/*   *MODULE      GZREAD       ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_r")
+
+/********************************************************************/
+/*   *MODULE      GZWRITE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_w")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateMark")
+  EXPORT SYMBOL("inflatePrime")
+  EXPORT SYMBOL("inflateReset2")
+  EXPORT SYMBOL("inflateUndermine")
+
 ENDPGMEXP
diff --git a/as400/compile.clp b/as400/compile.clp
new file mode 100644
index 0000000..2f34936
--- /dev/null
+++ b/as400/compile.clp
@@ -0,0 +1,110 @@
+/******************************************************************************/
+/*                                                                            */
+/*  ZLIB                                                                      */
+/*                                                                            */
+/*    Compile sources into modules and link them into a service program.      */
+/*                                                                            */
+/******************************************************************************/
+
+             PGM
+
+/*      Configuration adjustable parameters.                                  */
+
+             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Source library. */
+             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('SOURCES')                      /* Source member file. */
+             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('TOOLS')                        /* Control member file. */
+
+             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Module library. */
+
+             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('LGPL')                         /* Service program library. */
+
+             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
+                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
+
+             DCL        VAR(&TGTRLS) TYPE(*CHAR) +
+                          VALUE('V5R3M0')                       /* Target release. */
+
+
+/*      Working storage.                                                      */
+
+             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
+             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
+             DCL        VAR(&FIXDCMD) TYPE(*CHAR) LEN(512)
+
+
+/*      Compile sources into modules.                                         */
+
+             CHGVAR     VAR(&FIXDCMD) VALUE('CRTCMOD' *BCAT &CFLAGS *BCAT      +
+                        'SYSIFCOPT(*IFS64IO)' *BCAT                            +
+                        'DEFINE(''_LARGEFILE64_SOURCE''' *BCAT                 +
+                        '''_LFS64_LARGEFILE=1'') TGTRLS(' *TCAT &TGTRLS *TCAT  +
+                        ') SRCFILE(' *TCAT &SRCLIB *TCAT '/' *TCAT             +
+                        &SRCFILE *TCAT ') MODULE(' *TCAT &MODLIB *TCAT '/')
+
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ADLER32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'COMPRESS)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'CRC32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'DEFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZCLOSE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZLIB)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZREAD)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZWRITE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFBACK)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFFAST)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFTREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'TREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'UNCOMPR)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ZUTIL)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/*      Link modules into a service program.                                  */
+
+             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
+                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
+                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
+                                 &MODLIB/GZCLOSE     &MODLIB/GZLIB       +
+                                 &MODLIB/GZREAD      &MODLIB/GZWRITE     +
+                                 &MODLIB/INFBACK     &MODLIB/INFFAST     +
+                                 &MODLIB/INFLATE     &MODLIB/INFTREES    +
+                                 &MODLIB/TREES       &MODLIB/UNCOMPR     +
+                                 &MODLIB/ZUTIL)                          +
+                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC)       +
+                          TEXT('ZLIB 1.2.5.1') TGTRLS(&TGTRLS)
+
+             ENDPGM
diff --git a/old/as400/readme.txt b/as400/readme.txt
similarity index 89%
rename from old/as400/readme.txt
rename to as400/readme.txt
index beae13f..5b96cec 100644
--- a/old/as400/readme.txt
+++ b/as400/readme.txt
@@ -1,4 +1,4 @@
-        ZLIB version 1.2.3 for AS400 installation instructions
+        ZLIB version 1.2.5.1 for AS400 installation instructions
 
 I) From an AS400 *SAVF file:
 
@@ -70,7 +70,10 @@
     compress.c          COMPRESS C     ZLIB - Compress a memory buffer
     crc32.c             CRC32    C     ZLIB - Compute the CRC-32 of a data stream
     deflate.c           DEFLATE  C     ZLIB - Compress data using the deflation algorithm
-    gzio.c              GZIO     C     ZLIB - IO on .gz files
+    gzclose.c           GZCLOSE  C     ZLIB - Close .gz files
+    gzlib.c             GZLIB    C     ZLIB - Miscellaneous .gz files IO support
+    gzread.c            GZREAD   C     ZLIB - Read .gz files
+    gzwrite.c           GZWRITE  C     ZLIB - Write .gz files
     infback.c           INFBACK  C     ZLIB - Inflate using a callback interface
     inffast.c           INFFAST  C     ZLIB - Fast proc. literals & length/distance pairs
     inflate.c           INFLATE  C     ZLIB - Interface to inflate modules
@@ -81,6 +84,7 @@
                 H                      Original ZLIB C and ILE/RPG include files
     crc32.h             CRC32    C     ZLIB - CRC32 tables
     deflate.h           DEFLATE  C     ZLIB - Internal compression state
+    gzguts.h            GZGUTS   C     ZLIB - Definitions for the gzclose module
     inffast.h           INFFAST  C     ZLIB - Header to use inffast.c
     inffixed.h          INFFIXED C     ZLIB - Table for decoding fixed codes
     inflate.h           INFLATE  C     ZLIB - Internal inflate state definitions
@@ -108,4 +112,4 @@
                 implementation does not handle conversion from/to ASCII, so
                 text data code conversions must be done explicitely.
 
-        Always open zipped files in binary mode.
+        Mainly for the reason above, always open zipped files in binary mode.
diff --git a/old/as400/zlib.inc b/as400/zlib.inc
similarity index 78%
rename from old/as400/zlib.inc
rename to as400/zlib.inc
index a9a4f5c..d492ef3 100644
--- a/old/as400/zlib.inc
+++ b/as400/zlib.inc
@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.3.9
+      *  Version 1.2.5.1
       *
       *
       *  WARNING:
@@ -22,16 +22,25 @@
       *
       *  Versioning information.
       *
-     D ZLIB_VERSION    C                   '1.2.3.9'
-     D ZLIB_VERNUM     C                   X'1239'
+     D ZLIB_VERSION    C                   '1.2.5.1'
+     D ZLIB_VERNUM     C                   X'1251'
+     D ZLIB_VER_MAJOR  C                   1
+     D ZLIB_VER_MINOR  C                   2
+     D ZLIB_VER_REVISION...
+     D                 C                   5
+     D ZLIB_VER_SUBREVISION...
+     D                 C                   0
       *
       *  Other equates.
       *
      D Z_NO_FLUSH      C                   0
+     D Z_PARTIAL_FLUSH...
+     D                 C                   1
      D Z_SYNC_FLUSH    C                   2
      D Z_FULL_FLUSH    C                   3
      D Z_FINISH        C                   4
      D Z_BLOCK         C                   5
+     D Z_TREES         C                   6
       *
      D Z_OK            C                   0
      D Z_STREAM_END    C                   1
@@ -72,6 +81,7 @@
      D z_streamp       S               *                                        Stream struct ptr
      D gzFile          S               *                                        File pointer
      D z_off_t         S             10i 0                                      Stream offsets
+     D z_off64_t       S             20i 0                                      Stream offsets
       *
       **************************************************************************
       *                               Structures
@@ -122,20 +132,36 @@
      D  source                    32767    const options(*varsize)              Source buffer
      D  sourceLen                    10U 0 value                                Source length
       *
+      /if not defined(LARGE_FILES)
      D gzopen          PR                  extproc('gzopen')
      D                                     like(gzFile)
      D  path                           *   value options(*string)               File pathname
      D  mode                           *   value options(*string)               Open mode
+      /else
+     D gzopen          PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzopen64        PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      /endif
       *
      D gzdopen         PR                  extproc('gzdopen')
      D                                     like(gzFile)
-     D  fd                           10i 0 value                                File descriptor
+     D  fd                           10I 0 value                                File descriptor
      D  mode                           *   value options(*string)               Open mode
       *
+     D gzbuffer        PR            10I 0 extproc('gzbuffer')
+     D  file                               value like(gzFile)                   File pointer
+     D  size                         10U 0 value
+      *
      D gzsetparams     PR            10I 0 extproc('gzsetparams')
      D  file                               value like(gzFile)                   File pointer
      D  level                        10I 0 value
-     D  strategy                     10i 0 value
+     D  strategy                     10I 0 value
       *
      D gzread          PR            10I 0 extproc('gzread')
      D  file                               value like(gzFile)                   File pointer
@@ -160,22 +186,66 @@
      D  file                               value like(gzFile)                   File pointer
      D  flush                        10I 0 value                                Type of flush
       *
+      /if not defined(LARGE_FILES)
      D gzseek          PR                  extproc('gzseek')
      D                                     like(z_off_t)
      D  file                               value like(gzFile)                   File pointer
      D  offset                             value like(z_off_t)                  Offset
      D  whence                       10i 0 value                                Origin
+      /else
+     D gzseek          PR                  extproc('gzseek64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off_t)                  Offset
+     D  whence                       10i 0 value                                Origin
+      *
+     D gzseek64        PR                  extproc('gzseek64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off64_t)                Offset
+     D  whence                       10i 0 value                                Origin
+      /endif
       *
      D gzrewind        PR            10i 0 extproc('gzrewind')
      D  file                               value like(gzFile)                   File pointer
       *
+      /if not defined(LARGE_FILES)
      D gztell          PR                  extproc('gztell')
      D                                     like(z_off_t)
      D  file                               value like(gzFile)                   File pointer
+      /else
+     D gztell          PR                  extproc('gztell64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gztell64        PR                  extproc('gztell64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
+      *
+      /if not defined(LARGE_FILES)
+     D gzoffset        PR                  extproc('gzoffset')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      /else
+     D gzoffset        PR                  extproc('gzoffset64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzoffset64      PR                  extproc('gzoffset64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
       *
      D gzeof           PR            10i 0 extproc('gzeof')
      D  file                               value like(gzFile)                   File pointer
       *
+     D gzclose_r       PR            10i 0 extproc('gzclose_r')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_w       PR            10i 0 extproc('gzclose_w')
+     D  file                               value like(gzFile)                   File pointer
+      *
      D gzclose         PR            10i 0 extproc('gzclose')
      D  file                               value like(gzFile)                   File pointer
       *
@@ -253,6 +323,11 @@
      D  strm                               like(z_stream)                       Compression stream
      D  sourcelen                    10U 0 value                                Compression level
       *
+     D deflatePending  PR            10I 0 extproc('deflatePending')            Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  pending                      10U 0                                      Pending bytes
+     D  bits                         10I 0                                      Pending bits
+      *
      D deflatePrime    PR            10I 0 extproc('deflatePrime')              Change level & strat
      D  strm                               like(z_stream)                       Compression stream
      D  bits                         10I 0 value                                Number of bits to insert
@@ -280,6 +355,18 @@
      D inflateReset    PR            10I 0 extproc('inflateReset')              End and init. stream
      D  strm                               like(z_stream)                       Expansion stream
       *
+     D inflateReset2   PR            10I 0 extproc('inflateReset2')             End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                Log2(buffer size)
+      *
+     D inflatePrime    PR            10I 0 extproc('inflatePrime')              Insert bits
+     D  strm                               like(z_stream)                       Expansion stream
+     D  bits                         10I 0 value                                Bit count
+     D  value                        10I 0 value                                Bits to insert
+      *
+     D inflateMark     PR            10I 0 extproc('inflateMark')               Get inflate info
+     D  strm                               like(z_stream)                       Expansion stream
+      *
      D inflateBackInit...
      D                 PR            10I 0 extproc('inflateBackInit_')
      D  strm                               like(z_stream)                       Expansion stream
@@ -328,4 +415,9 @@
       *
      D get_crc_table   PR              *   extproc('get_crc_table')             Ptr to ulongs
       *
+     D inflateUndermine...
+     D                 PR            10I 0 extproc('inflateUndermine')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  arg                          10I 0 value                                Error code
+      *
       /endif
diff --git a/configure b/configure
index bd9edd2..1838846 100755
--- a/configure
+++ b/configure
@@ -14,12 +14,11 @@
 # an error.
 
 if [ -n "${CHOST}" ]; then
-    uname="$(echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/')"
+    uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
     CROSS_PREFIX="${CHOST}-"
 fi
 
 STATICLIB=libz.a
-LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
@@ -46,6 +45,7 @@
 fi
 LDCONFIG=${LDCONFIG-"ldconfig"}
 LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
+ARCHS=
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-'${prefix}'}
 libdir=${libdir-'${exec_prefix}/lib'}
@@ -67,7 +67,7 @@
       echo 'usage:'
       echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]'
       echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
-      echo '    [--includedir=INCLUDEDIR]'
+      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]'
         exit 0 ;;
     -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
     -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
@@ -83,6 +83,7 @@
     -t | --static) shared=0; shift ;;
     -z* | --zprefix) zprefix=1; shift ;;
     -6* | --64) build64=1; shift ;;
+    -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
     --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
     --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
     *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
@@ -102,11 +103,15 @@
 case "$cc" in
   *gcc*) gcc=1 ;;
 esac
+case `$cc -v 2>&1` in
+  *gcc*) gcc=1 ;;
+esac
 
 if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
   CC="$cc"
+  CFLAGS="${CFLAGS--O3} ${ARCHS}"
   SFLAGS="${CFLAGS--O3} -fPIC"
-  CFLAGS="${CFLAGS--O3}"
+  LDFLAGS="${LDFLAGS} ${ARCHS}"
   if test $build64 -eq 1; then
     CFLAGS="${CFLAGS} -m64"
     SFLAGS="${SFLAGS} -m64"
@@ -118,10 +123,11 @@
     uname=`(uname -s || echo unknown) 2>/dev/null`
   fi
   case "$uname" in
-  Linux* | linux* | GNU | GNU/* | *BSD | DragonFly) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  Linux* | linux* | GNU | GNU/* | *BSD | *bsd* | DragonFly | solaris*)
+        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
   CYGWIN* | Cygwin* | cygwin* | OS/2*)
         EXE='.exe' ;;
-  MINGW*|mingw*)
+  MINGW* | mingw*)
 # temporary bypass
         rm -f $test.[co] $test $test$shared_ext
         echo "Please use win32/Makefile.gcc instead."
@@ -142,11 +148,14 @@
                  shared_ext='.sl'
                  SHAREDLIB='libz.sl' ;;
          esac ;;
-  Darwin*)   shared_ext='.dylib'
+  Darwin* | darwin*)
+             shared_ext='.dylib'
              SHAREDLIB=libz$shared_ext
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
+             AR="libtool"
+             AR_RC="${AR} -o" ;;
   *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
   esac
 else
@@ -187,7 +196,8 @@
   SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
              CFLAGS=${CFLAGS-"-O3"}
              LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
-  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
+  SunOS\ 5* | solaris*)
+         LDSHARED=${LDSHARED-"cc -G"}
          case `(uname -m || echo unknown) 2>/dev/null` in
          i86*)
              SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
@@ -303,6 +313,18 @@
   echo "Checking for unistd.h... No."
 fi
 
+cat > $test.c <<EOF
+#include <stdarg.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Checking for stdarg.h... Yes."
+else
+  echo "Checking for stdarg.h... No."
+fi
+
 if test $zprefix -eq 1; then
   sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
   mv zconf.temp.h zconf.h
@@ -347,7 +369,6 @@
   return (mytest("Hello%d\n", 1));
 }
 EOF
-
   if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
     echo "Checking for vsnprintf() in stdio.h... Yes."
 
diff --git a/contrib/asm686/match.S b/contrib/asm686/match.S
index 06817e1..fa42109 100644
--- a/contrib/asm686/match.S
+++ b/contrib/asm686/match.S
@@ -83,17 +83,25 @@
 .text
 
 /* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+.cfi_sections	.debug_frame
 
 longest_match:
 
+.cfi_startproc
 /* Save registers that the compiler may be using, and adjust %esp to	*/
 /* make room for our stack frame.					*/
 
 		pushl	%ebp
+		.cfi_def_cfa_offset 8
+		.cfi_offset ebp, -8
 		pushl	%edi
+		.cfi_def_cfa_offset 12
 		pushl	%esi
+		.cfi_def_cfa_offset 16
 		pushl	%ebx
+		.cfi_def_cfa_offset 20
 		subl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset LocalVarsSize+20
 
 /* Retrieve the function arguments. %ecx will hold cur_match		*/
 /* throughout the entire function. %edx will hold the pointer to the	*/
@@ -108,7 +116,7 @@
 /* if (s->prev_length >= s->good_match) {				*/
 /*     chain_length >>= 2;						*/
 /* }									*/
-
+ 
 		movl	dsPrevLen(%edx), %eax
 		movl	dsGoodMatch(%edx), %ebx
 		cmpl	%ebx, %eax
@@ -336,8 +344,14 @@
 /* Restore the stack and return from whence we came.			*/
 
 		addl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset 20
 		popl	%ebx
+		.cfi_def_cfa_offset 16
 		popl	%esi
+		.cfi_def_cfa_offset 12
 		popl	%edi
+		.cfi_def_cfa_offset 8
 		popl	%ebp
+		.cfi_def_cfa_offset 4
+.cfi_endproc
 match_init:	ret
diff --git a/contrib/delphi/ZLib.pas b/contrib/delphi/ZLib.pas
index 0d86fb5..8690594 100644
--- a/contrib/delphi/ZLib.pas
+++ b/contrib/delphi/ZLib.pas
@@ -152,7 +152,7 @@
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.5';
+  zlib_version = '1.2.5.1';
 
 type
   EZlibError = class(Exception);
diff --git a/contrib/dotzlib/DotZLib/UnitTests.cs b/contrib/dotzlib/DotZLib/UnitTests.cs
index 3bbcc8c..e004833 100644
--- a/contrib/dotzlib/DotZLib/UnitTests.cs
+++ b/contrib/dotzlib/DotZLib/UnitTests.cs
@@ -156,7 +156,7 @@
         public void Info_Version()
         {
             Info info = new Info();
-            Assert.AreEqual("1.2.5", Info.Version);
+            Assert.AreEqual("1.2.5.1", Info.Version);
             Assert.AreEqual(32, info.SizeOfUInt);
             Assert.AreEqual(32, info.SizeOfULong);
             Assert.AreEqual(32, info.SizeOfPointer);
diff --git a/contrib/infback9/inftree9.c b/contrib/infback9/inftree9.c
index 306c5f1..dfd0030 100644
--- a/contrib/infback9/inftree9.c
+++ b/contrib/infback9/inftree9.c
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.5 Copyright 1995-2010 Mark Adler ";
+   " inflate9 1.2.5.1 Copyright 1995-2010 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 73, 195};
+        133, 133, 133, 133, 144, 205, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
diff --git a/contrib/masmx86/inffas32.asm b/contrib/masmx86/inffas32.asm
index 92ac22a..03d20f8 100644
--- a/contrib/masmx86/inffas32.asm
+++ b/contrib/masmx86/inffas32.asm
@@ -73,11 +73,6 @@
 
 
 _TEXT			segment
-PUBLIC _inflate_fast
-
-ALIGN 4
-_inflate_fast:
-	jmp inflate_fast_entry
 
 
 
@@ -163,7 +158,8 @@
 ;SECTION .text
 
 ALIGN 4
-inflate_fast_entry:
+_inflate_fast proc near
+.FPO (16, 4, 0, 0, 1, 0)
 	push  edi
 	push  esi
 	push  ebp
@@ -1078,6 +1074,7 @@
 	pop  esi
 	pop  edi
 	ret
+_inflate_fast endp
 
 _TEXT	ends
 end
diff --git a/contrib/masmx86/match686.asm b/contrib/masmx86/match686.asm
index 1eaf555..3b09212 100644
--- a/contrib/masmx86/match686.asm
+++ b/contrib/masmx86/match686.asm
@@ -195,6 +195,7 @@
     ELSE
     _longest_match      proc near
     ENDIF
+.FPO (9, 4, 0, 0, 1, 0)
 
 ;;; Save registers that the compiler may be using, and adjust esp to
 ;;; make room for our stack frame.
diff --git a/contrib/minizip/ioapi.c b/contrib/minizip/ioapi.c
index 49958f6..d4bc020 100644
--- a/contrib/minizip/ioapi.c
+++ b/contrib/minizip/ioapi.c
@@ -14,6 +14,18 @@
         #define _CRT_SECURE_NO_WARNINGS
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include "ioapi.h"
 
 voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
@@ -112,7 +124,7 @@
         mode_fopen = "wb";
 
     if ((filename!=NULL) && (mode_fopen != NULL))
-        file = fopen64((const char*)filename, mode_fopen);
+        file = FOPEN_FUNC((const char*)filename, mode_fopen);
     return file;
 }
 
@@ -142,7 +154,7 @@
 static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
 {
     ZPOS64_T ret;
-    ret = ftello64((FILE *)stream);
+    ret = FTELLO_FUNC((FILE *)stream);
     return ret;
 }
 
@@ -188,7 +200,7 @@
     }
     ret = 0;
 
-    if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
+    if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
                         ret = -1;
 
     return ret;
diff --git a/contrib/minizip/ioapi.h b/contrib/minizip/ioapi.h
index 8309c4c..f6dce26 100644
--- a/contrib/minizip/ioapi.h
+++ b/contrib/minizip/ioapi.h
@@ -21,7 +21,7 @@
 #ifndef _ZLIBIOAPI64_H
 #define _ZLIBIOAPI64_H
 
-#if (!defined(_WIN32)) && (!defined(WIN32))
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
 
   // Linux needs this to support file operation on files larger then 4+GB
   // But might need better if/def to select just the platforms that needs them.
@@ -38,6 +38,7 @@
         #ifndef _FILE_OFFSET_BIT
                 #define _FILE_OFFSET_BIT 64
         #endif
+
 #endif
 
 #include <stdio.h>
diff --git a/contrib/minizip/miniunz.c b/contrib/minizip/miniunz.c
index 9ed009f..3d65401 100644
--- a/contrib/minizip/miniunz.c
+++ b/contrib/minizip/miniunz.c
@@ -12,7 +12,7 @@
          Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 */
 
-#ifndef _WIN32
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
         #ifndef __USE_FILE_OFFSET64
                 #define __USE_FILE_OFFSET64
         #endif
@@ -27,6 +27,18 @@
         #endif
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -34,14 +46,15 @@
 #include <errno.h>
 #include <fcntl.h>
 
-#ifdef unix
-# include <unistd.h>
-# include <utime.h>
-#else
+#ifdef _WIN32
 # include <direct.h>
 # include <io.h>
+#else
+# include <unistd.h>
+# include <utime.h>
 #endif
 
+
 #include "unzip.h"
 
 #define CASESENSITIVITY (0)
@@ -84,7 +97,7 @@
   SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
   CloseHandle(hFile);
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
   struct utimbuf ut;
   struct tm newdate;
   newdate.tm_sec = tmu_date.tm_sec;
@@ -114,10 +127,10 @@
     int ret=0;
 #ifdef _WIN32
     ret = _mkdir(dirname);
-#else
-#ifdef unix
+#elif unix
     ret = mkdir (dirname,0775);
-#endif
+#elif __APPLE__
+    ret = mkdir (dirname,0775);
 #endif
     return ret;
 }
@@ -364,7 +377,7 @@
         {
             char rep=0;
             FILE* ftestexist;
-            ftestexist = fopen64(write_filename,"rb");
+            ftestexist = FOPEN_FUNC(write_filename,"rb");
             if (ftestexist!=NULL)
             {
                 fclose(ftestexist);
@@ -395,8 +408,7 @@
 
         if ((skip==0) && (err==UNZ_OK))
         {
-            fout=fopen64(write_filename,"wb");
-
+            fout=FOPEN_FUNC(write_filename,"wb");
             /* some zipfile don't contain directory alone before file */
             if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
                                 (filename_withoutpath!=(char*)filename_inzip))
@@ -405,7 +417,7 @@
                 *(filename_withoutpath-1)='\0';
                 makedir(write_filename);
                 *(filename_withoutpath-1)=c;
-                fout=fopen64(write_filename,"wb");
+                fout=FOPEN_FUNC(write_filename,"wb");
             }
 
             if (fout==NULL)
diff --git a/contrib/minizip/minizip.c b/contrib/minizip/minizip.c
index 7a4fa5a..de63e37 100644
--- a/contrib/minizip/minizip.c
+++ b/contrib/minizip/minizip.c
@@ -13,7 +13,7 @@
 */
 
 
-#ifndef _WIN32
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
         #ifndef __USE_FILE_OFFSET64
                 #define __USE_FILE_OFFSET64
         #endif
@@ -28,6 +28,19 @@
         #endif
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -35,14 +48,14 @@
 #include <errno.h>
 #include <fcntl.h>
 
-#ifdef unix
+#ifdef _WIN32
+# include <direct.h>
+# include <io.h>
+#else
 # include <unistd.h>
 # include <utime.h>
 # include <sys/types.h>
 # include <sys/stat.h>
-#else
-# include <direct.h>
-# include <io.h>
 #endif
 
 #include "zip.h"
@@ -81,7 +94,7 @@
   return ret;
 }
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
 uLong filetime(f, tmzip, dt)
     char *f;               /* name of file to get info on */
     tm_zip *tmzip;         /* return value: access, modific. and creation times */
@@ -142,7 +155,7 @@
 {
     FILE* ftestexist;
     int ret = 1;
-    ftestexist = fopen64(filename,"rb");
+    ftestexist = FOPEN_FUNC(filename,"rb");
     if (ftestexist==NULL)
         ret = 0;
     else
@@ -173,7 +186,8 @@
 {
    unsigned long calculate_crc=0;
    int err=ZIP_OK;
-   FILE * fin = fopen64(filenameinzip,"rb");
+   FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
+   
    unsigned long size_read = 0;
    unsigned long total_read = 0;
    if (fin==NULL)
@@ -211,13 +225,12 @@
 {
   int largeFile = 0;
   ZPOS64_T pos = 0;
-  FILE* pFile = fopen64(filename, "rb");
+  FILE* pFile = FOPEN_FUNC(filename, "rb");
 
   if(pFile != NULL)
   {
-    int n = fseeko64(pFile, 0, SEEK_END);
-
-    pos = ftello64(pFile);
+    int n = FSEEKO_FUNC(pFile, 0, SEEK_END);
+    pos = FTELLO_FUNC(pFile);
 
                 printf("File : %s is %lld bytes\n", filename, pos);
 
@@ -447,7 +460,7 @@
                     printf("error in opening %s in zipfile\n",filenameinzip);
                 else
                 {
-                    fin = fopen64(filenameinzip,"rb");
+                    fin = FOPEN_FUNC(filenameinzip,"rb");
                     if (fin==NULL)
                     {
                         err=ZIP_ERRNO;
diff --git a/contrib/minizip/unzip.c b/contrib/minizip/unzip.c
index 7617f41..587a2a1 100644
--- a/contrib/minizip/unzip.c
+++ b/contrib/minizip/unzip.c
@@ -1145,7 +1145,7 @@
                                                 szFileName,fileNameBufferSize,
                                                 extraField,extraFieldBufferSize,
                                                 szComment,commentBufferSize);
-    if (err==UNZ_OK)
+    if ((err==UNZ_OK) && (pfile_info != NULL))
     {
         pfile_info->version = file_info64.version;
         pfile_info->version_needed = file_info64.version_needed;
diff --git a/contrib/pascal/zlibpas.pas b/contrib/pascal/zlibpas.pas
index 637ae3a..6f49482 100644
--- a/contrib/pascal/zlibpas.pas
+++ b/contrib/pascal/zlibpas.pas
@@ -10,7 +10,7 @@
 interface
 
 const
-  ZLIB_VERSION = '1.2.5';
+  ZLIB_VERSION = '1.2.5.1';
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
@@ -97,6 +97,7 @@
 function deflateReset(var strm: z_stream): Integer;
 function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
 function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
+function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer;
 function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
 function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
 function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
@@ -166,6 +167,7 @@
 function deflateInit_; external;
 function deflateInit2_; external;
 function deflateParams; external;
+function deflatePending; external;
 function deflatePrime; external;
 function deflateReset; external;
 function deflateSetDictionary; external;
diff --git a/contrib/puff/Makefile b/contrib/puff/Makefile
index b6b6940..0e2594c 100644
--- a/contrib/puff/Makefile
+++ b/contrib/puff/Makefile
@@ -1,8 +1,42 @@
-puff: puff.c puff.h
-	cc -DTEST -o puff puff.c
+CFLAGS=-O
+
+puff: puff.o pufftest.o
+
+puff.o: puff.h
+
+pufftest.o: puff.h
 
 test: puff
 	puff zeros.raw
 
+puft: puff.c puff.h pufftest.o
+	cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o
+
+# puff full coverage test (should say 100%)
+cov: puft
+	@rm -f *.gcov *.gcda
+	@puft -w zeros.raw 2>&1 | cat > /dev/null
+	@echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254
+	@echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249
+	@echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245
+	@puft -f zeros.raw 2>&1 | cat > /dev/null
+	@echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253
+	@echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252
+	@echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248
+	@echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250
+	@echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247
+	@gcov -n puff.c
+
 clean:
-	rm -f puff puff.o
+	rm -f puff puft *.o *.gc*
diff --git a/contrib/puff/puff.c b/contrib/puff/puff.c
index 650694e..df8470c 100644
--- a/contrib/puff/puff.c
+++ b/contrib/puff/puff.c
@@ -2,7 +2,7 @@
  * puff.c
  * Copyright (C) 2002-2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in puff.h
- * version 2.1, 4 Apr 2010
+ * version 2.2, 25 Apr 2010
  *
  * puff.c is a simple inflate written to be an unambiguous way to specify the
  * deflate format.  It is not written for speed but rather simplicity.  As a
@@ -49,9 +49,9 @@
  *                      - Fix fixed codes table error
  *                      - Provide a scanning mode for determining size of
  *                        uncompressed data
- * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Jean-loup]
+ * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Gailly]
  *                      - Add a puff.h file for the interface
- *                      - Add braces in puff() for else do [Jean-loup]
+ *                      - Add braces in puff() for else do [Gailly]
  *                      - Use indexes instead of pointers for readability
  * 1.4  31 Mar 2002     - Simplify construct() code set check
  *                      - Fix some comments
@@ -69,13 +69,19 @@
  *                      - Allow TEST code to read from piped stdin
  * 2.1   4 Apr 2010     - Avoid variable initialization for happier compilers
  *                      - Avoid unsigned comparisons for even happier compilers
+ * 2.2  25 Apr 2010     - Fix bug in variable initializations [Oberhumer]
+ *                      - Add const where appropriate [Oberhumer]
+ *                      - Split if's and ?'s for coverage testing
+ *                      - Break out test code to separate file
+ *                      - Move NIL to puff.h
+ *                      - Allow incomplete code only if single code length is 1
+ *                      - Add full code coverage test to Makefile
  */
 
 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
 #include "puff.h"               /* prototype for puff() */
 
 #define local static            /* for local function definitions */
-#define NIL ((unsigned char *)0)        /* for no output option */
 
 /*
  * Maximums for allocations and loops.  It is not useful to change these --
@@ -95,7 +101,7 @@
     unsigned long outcnt;       /* bytes written to out so far */
 
     /* input state */
-    unsigned char *in;          /* input buffer */
+    const unsigned char *in;    /* input buffer */
     unsigned long inlen;        /* available input at in */
     unsigned long incnt;        /* bytes read so far */
     int bitbuf;                 /* bit buffer */
@@ -123,7 +129,8 @@
     /* load at least need bits into val */
     val = s->bitbuf;
     while (s->bitcnt < need) {
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
         val |= (long)(s->in[s->incnt++]) << s->bitcnt;  /* load eight bits */
         s->bitcnt += 8;
     }
@@ -162,7 +169,8 @@
     s->bitcnt = 0;
 
     /* get length and check against its one's complement */
-    if (s->incnt + 4 > s->inlen) return 2;      /* not enough input */
+    if (s->incnt + 4 > s->inlen)
+        return 2;                               /* not enough input */
     len = s->in[s->incnt++];
     len |= s->in[s->incnt++] << 8;
     if (s->in[s->incnt++] != (~len & 0xff) ||
@@ -170,7 +178,8 @@
         return -2;                              /* didn't match complement! */
 
     /* copy len bytes from in to out */
-    if (s->incnt + len > s->inlen) return 2;    /* not enough input */
+    if (s->incnt + len > s->inlen)
+        return 2;                               /* not enough input */
     if (s->out != NIL) {
         if (s->outcnt + len > s->outlen)
             return 1;                           /* not enough output space */
@@ -222,7 +231,7 @@
  *   in the deflate format.  See the format notes for fixed() and dynamic().
  */
 #ifdef SLOW
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
     int len;            /* current number of bits in code */
     int code;           /* len bits being decoded */
@@ -250,7 +259,7 @@
  * a few percent larger.
  */
 #else /* !SLOW */
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
     int len;            /* current number of bits in code */
     int code;           /* len bits being decoded */
@@ -283,10 +292,13 @@
             len++;
         }
         left = (MAXBITS+1) - len;
-        if (left == 0) break;
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        if (left == 0)
+            break;
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
         bitbuf = s->in[s->incnt++];
-        if (left > 8) left = 8;
+        if (left > 8)
+            left = 8;
     }
     return -10;                         /* ran out of codes */
 }
@@ -324,7 +336,7 @@
  * - Within a given code length, the symbols are kept in ascending order for
  *   the code bits definition.
  */
-local int construct(struct huffman *h, short *length, int n)
+local int construct(struct huffman *h, const short *length, int n)
 {
     int symbol;         /* current symbol when stepping through length[] */
     int len;            /* current length when stepping through h->count[] */
@@ -344,7 +356,8 @@
     for (len = 1; len <= MAXBITS; len++) {
         left <<= 1;                     /* one more bit, double codes left */
         left -= h->count[len];          /* deduct count from possible codes */
-        if (left < 0) return left;      /* over-subscribed--return negative */
+        if (left < 0)
+            return left;                /* over-subscribed--return negative */
     }                                   /* left > 0 means incomplete */
 
     /* generate offsets into symbol table for each length for sorting */
@@ -420,8 +433,8 @@
  *   defined to do the wrong thing in this case.
  */
 local int codes(struct state *s,
-                struct huffman *lencode,
-                struct huffman *distcode)
+                const struct huffman *lencode,
+                const struct huffman *distcode)
 {
     int symbol;         /* decoded symbol */
     int len;            /* length for copy */
@@ -444,11 +457,13 @@
     /* decode literals and length/distance pairs */
     do {
         symbol = decode(s, lencode);
-        if (symbol < 0) return symbol;  /* invalid symbol */
+        if (symbol < 0)
+            return symbol;              /* invalid symbol */
         if (symbol < 256) {             /* literal: symbol is the byte */
             /* write out the literal */
             if (s->out != NIL) {
-                if (s->outcnt == s->outlen) return 1;
+                if (s->outcnt == s->outlen)
+                    return 1;
                 s->out[s->outcnt] = symbol;
             }
             s->outcnt++;
@@ -456,12 +471,14 @@
         else if (symbol > 256) {        /* length */
             /* get and compute length */
             symbol -= 257;
-            if (symbol >= 29) return -10;       /* invalid fixed code */
+            if (symbol >= 29)
+                return -10;             /* invalid fixed code */
             len = lens[symbol] + bits(s, lext[symbol]);
 
             /* get and check distance */
             symbol = decode(s, distcode);
-            if (symbol < 0) return symbol;      /* invalid symbol */
+            if (symbol < 0)
+                return symbol;          /* invalid symbol */
             dist = dists[symbol] + bits(s, dext[symbol]);
 #ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
             if (dist > s->outcnt)
@@ -470,13 +487,15 @@
 
             /* copy length bytes from distance bytes back */
             if (s->out != NIL) {
-                if (s->outcnt + len > s->outlen) return 1;
+                if (s->outcnt + len > s->outlen)
+                    return 1;
                 while (len--) {
                     s->out[s->outcnt] =
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                        dist > s->outcnt ? 0 :
+                        dist > s->outcnt ?
+                            0 :
 #endif
-                        s->out[s->outcnt - dist];
+                            s->out[s->outcnt - dist];
                     s->outcnt++;
                 }
             }
@@ -525,6 +544,12 @@
         int symbol;
         short lengths[FIXLCODES];
 
+        /* construct lencode and distcode */
+        lencode.count = lencnt;
+        lencode.symbol = lensym;
+        distcode.count = distcnt;
+        distcode.symbol = distsym;
+
         /* literal/length table */
         for (symbol = 0; symbol < 144; symbol++)
             lengths[symbol] = 8;
@@ -541,12 +566,6 @@
             lengths[symbol] = 5;
         construct(&distcode, lengths, MAXDCODES);
 
-        /* construct lencode and distcode */
-        lencode.count = lencnt;
-        lencode.symbol = lensym;
-        distcode.count = distcnt;
-        distcode.symbol = distsym;
-
         /* do this just once */
         virgin = 0;
     }
@@ -675,7 +694,8 @@
 
     /* build huffman table for code lengths codes (use lencode temporarily) */
     err = construct(&lencode, lengths, 19);
-    if (err != 0) return -4;            /* require complete code set here */
+    if (err != 0)               /* require complete code set here */
+        return -4;
 
     /* read length/literal and distance code length tables */
     index = 0;
@@ -689,7 +709,8 @@
         else {                          /* repeat instruction */
             len = 0;                    /* assume repeating zeros */
             if (symbol == 16) {         /* repeat last length 3..6 times */
-                if (index == 0) return -5;      /* no last length! */
+                if (index == 0)
+                    return -5;          /* no last length! */
                 len = lengths[index - 1];       /* last length */
                 symbol = 3 + bits(s, 2);
             }
@@ -710,13 +731,13 @@
 
     /* build huffman table for literal/length codes */
     err = construct(&lencode, lengths, nlen);
-    if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
-        return -7;      /* only allow incomplete codes if just one code */
+    if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
+        return -7;      /* incomplete code ok only for single length 1 code */
 
     /* build huffman table for distance codes */
     err = construct(&distcode, lengths + nlen, ndist);
-    if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
-        return -8;      /* only allow incomplete codes if just one code */
+    if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
+        return -8;      /* incomplete code ok only for single length 1 code */
 
     /* decode data until end-of-block code */
     return codes(s, &lencode, &distcode);
@@ -768,7 +789,7 @@
  */
 int puff(unsigned char *dest,           /* pointer to destination pointer */
          unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
          unsigned long *sourcelen)      /* amount of input available */
 {
     struct state s;             /* input/output state */
@@ -795,11 +816,15 @@
         do {
             last = bits(&s, 1);         /* one if last block */
             type = bits(&s, 2);         /* block type 0..3 */
-            err = type == 0 ? stored(&s) :
-                  (type == 1 ? fixed(&s) :
-                   (type == 2 ? dynamic(&s) :
-                    -1));               /* type == 3, invalid */
-            if (err != 0) break;        /* return with error */
+            err = type == 0 ?
+                    stored(&s) :
+                    (type == 1 ?
+                        fixed(&s) :
+                        (type == 2 ?
+                            dynamic(&s) :
+                            -1));       /* type == 3, invalid */
+            if (err != 0)
+                break;                  /* return with error */
         } while (!last);
     }
 
@@ -810,146 +835,3 @@
     }
     return err;
 }
-
-#ifdef TEST
-/* Examples of how to use puff().
-
-   Usage: puff [-w] [-nnn] file
-          ... | puff [-w] [-nnn]
-
-   where file is the input file with deflate data, nnn is the number of bytes
-   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
-   -w is used to write the decompressed data to stdout */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-/* Return size times approximately the cube root of 2, keeping the result as 1,
-   3, or 5 times a power of 2 -- the result is always > size, until the result
-   is the maximum value of an unsigned long, where it remains.  This is useful
-   to keep reallocations less than ~33% over the actual data. */
-local size_t bythirds(size_t size)
-{
-    int n;
-    size_t m;
-
-    m = size;
-    for (n = 0; m; n++)
-        m >>= 1;
-    if (n < 3)
-        return size + 1;
-    n -= 3;
-    m = size >> n;
-    m += m == 6 ? 2 : 1;
-    m <<= n;
-    return m > size ? m : (size_t)(-1);
-}
-
-/* Read the input file *name, or stdin if name is NULL, into allocated memory.
-   Reallocate to larger buffers until the entire file is read in.  Return a
-   pointer to the allocated data, or NULL if there was a memory allocation
-   failure.  *len is the number of bytes of data read from the input file (even
-   if load() returns NULL).  If the input file was empty or could not be opened
-   or read, *len is zero. */
-local void *load(char *name, size_t *len)
-{
-    size_t size;
-    void *buf, *swap;
-    FILE *in;
-
-    *len = 0;
-    buf = malloc(size = 4096);
-    if (buf == NULL)
-        return NULL;
-    in = name == NULL ? stdin : fopen(name, "rb");
-    if (in != NULL) {
-        for (;;) {
-            *len += fread((char *)buf + *len, 1, size - *len, in);
-            if (*len < size) break;
-            size = bythirds(size);
-            if (size == *len || (swap = realloc(buf, size)) == NULL) {
-                free(buf);
-                buf = NULL;
-                break;
-            }
-            buf = swap;
-        }
-        fclose(in);
-    }
-    return buf;
-}
-
-int main(int argc, char **argv)
-{
-    int ret, put = 0;
-    unsigned skip = 0;
-    char *arg, *name = NULL;
-    unsigned char *source = NULL, *dest;
-    size_t len = 0;
-    unsigned long sourcelen, destlen;
-
-    /* process arguments */
-    while (arg = *++argv, --argc)
-        if (arg[0] == '-') {
-            if (arg[1] == 'w' && arg[2] == 0)
-                put = 1;
-            else if (arg[1] >= '0' && arg[1] <= '9')
-                skip = (unsigned)atoi(arg + 1);
-            else {
-                fprintf(stderr, "invalid option %s\n", arg);
-                return 3;
-            }
-        }
-        else if (name != NULL) {
-            fprintf(stderr, "only one file name allowed\n");
-            return 3;
-        }
-        else
-            name = arg;
-    source = load(name, &len);
-    if (source == NULL) {
-        fprintf(stderr, "memory allocation failure\n");
-        return 4;
-    }
-    if (len == 0) {
-        fprintf(stderr, "could not read %s, or it was empty\n",
-                name == NULL ? "<stdin>" : name);
-        free(source);
-        return 3;
-    }
-    if (skip >= len) {
-        fprintf(stderr, "skip request of %d leaves no input\n", skip);
-        free(source);
-        return 3;
-    }
-
-    /* test inflate data with offset skip */
-    len -= skip;
-    sourcelen = (unsigned long)len;
-    ret = puff(NIL, &destlen, source + skip, &sourcelen);
-    if (ret)
-        fprintf(stderr, "puff() failed with return code %d\n", ret);
-    else {
-        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
-        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
-                                     len - sourcelen);
-    }
-
-    /* if requested, inflate again and write decompressd data to stdout */
-    if (put) {
-        dest = malloc(destlen);
-        if (dest == NULL) {
-            fprintf(stderr, "memory allocation failure\n");
-            free(source);
-            return 4;
-        }
-        puff(dest, &destlen, source + skip, &sourcelen);
-        fwrite(dest, 1, destlen, stdout);
-        free(dest);
-    }
-
-    /* clean up */
-    free(source);
-    return ret;
-}
-#endif
diff --git a/contrib/puff/puff.h b/contrib/puff/puff.h
index 88d1b38..6a0080a 100644
--- a/contrib/puff/puff.h
+++ b/contrib/puff/puff.h
@@ -1,6 +1,6 @@
 /* puff.h
   Copyright (C) 2002-2010 Mark Adler, all rights reserved
-  version 2.1, 4 Apr 2010
+  version 2.2, 25 Apr 2010
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the author be held liable for any damages
@@ -25,7 +25,11 @@
 /*
  * See puff.c for purpose and usage.
  */
+#ifndef NIL
+#  define NIL ((unsigned char *)0)      /* for no output option */
+#endif
+
 int puff(unsigned char *dest,           /* pointer to destination pointer */
          unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
          unsigned long *sourcelen);     /* amount of input available */
diff --git a/contrib/puff/pufftest.c b/contrib/puff/pufftest.c
new file mode 100644
index 0000000..76e35f6
--- /dev/null
+++ b/contrib/puff/pufftest.c
@@ -0,0 +1,165 @@
+/*
+ * pufftest.c
+ * Copyright (C) 2002-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.2, 25 Apr 2010
+ */
+
+/* Example of how to use puff().
+
+   Usage: puff [-w] [-f] [-nnn] file
+          ... | puff [-w] [-f] [-nnn]
+
+   where file is the input file with deflate data, nnn is the number of bytes
+   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+   -w is used to write the decompressed data to stdout.  -f is for coverage
+   testing, and causes pufftest to fail with not enough output space (-f does
+   a write like -w, so -w is not required). */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "puff.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+#define local static
+
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+   3, or 5 times a power of 2 -- the result is always > size, until the result
+   is the maximum value of an unsigned long, where it remains.  This is useful
+   to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
+{
+    int n;
+    size_t m;
+
+    m = size;
+    for (n = 0; m; n++)
+        m >>= 1;
+    if (n < 3)
+        return size + 1;
+    n -= 3;
+    m = size >> n;
+    m += m == 6 ? 2 : 1;
+    m <<= n;
+    return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+   Reallocate to larger buffers until the entire file is read in.  Return a
+   pointer to the allocated data, or NULL if there was a memory allocation
+   failure.  *len is the number of bytes of data read from the input file (even
+   if load() returns NULL).  If the input file was empty or could not be opened
+   or read, *len is zero. */
+local void *load(const char *name, size_t *len)
+{
+    size_t size;
+    void *buf, *swap;
+    FILE *in;
+
+    *len = 0;
+    buf = malloc(size = 4096);
+    if (buf == NULL)
+        return NULL;
+    in = name == NULL ? stdin : fopen(name, "rb");
+    if (in != NULL) {
+        for (;;) {
+            *len += fread((char *)buf + *len, 1, size - *len, in);
+            if (*len < size) break;
+            size = bythirds(size);
+            if (size == *len || (swap = realloc(buf, size)) == NULL) {
+                free(buf);
+                buf = NULL;
+                break;
+            }
+            buf = swap;
+        }
+        fclose(in);
+    }
+    return buf;
+}
+
+int main(int argc, char **argv)
+{
+    int ret, put = 0, fail = 0;
+    unsigned skip = 0;
+    char *arg, *name = NULL;
+    unsigned char *source = NULL, *dest;
+    size_t len = 0;
+    unsigned long sourcelen, destlen;
+
+    /* process arguments */
+    while (arg = *++argv, --argc)
+        if (arg[0] == '-') {
+            if (arg[1] == 'w' && arg[2] == 0)
+                put = 1;
+            else if (arg[1] == 'f' && arg[2] == 0)
+                fail = 1, put = 1;
+            else if (arg[1] >= '0' && arg[1] <= '9')
+                skip = (unsigned)atoi(arg + 1);
+            else {
+                fprintf(stderr, "invalid option %s\n", arg);
+                return 3;
+            }
+        }
+        else if (name != NULL) {
+            fprintf(stderr, "only one file name allowed\n");
+            return 3;
+        }
+        else
+            name = arg;
+    source = load(name, &len);
+    if (source == NULL) {
+        fprintf(stderr, "memory allocation failure\n");
+        return 4;
+    }
+    if (len == 0) {
+        fprintf(stderr, "could not read %s, or it was empty\n",
+                name == NULL ? "<stdin>" : name);
+        free(source);
+        return 3;
+    }
+    if (skip >= len) {
+        fprintf(stderr, "skip request of %d leaves no input\n", skip);
+        free(source);
+        return 3;
+    }
+
+    /* test inflate data with offset skip */
+    len -= skip;
+    sourcelen = (unsigned long)len;
+    ret = puff(NIL, &destlen, source + skip, &sourcelen);
+    if (ret)
+        fprintf(stderr, "puff() failed with return code %d\n", ret);
+    else {
+        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+                                     len - sourcelen);
+    }
+
+    /* if requested, inflate again and write decompressd data to stdout */
+    if (put && ret == 0) {
+        if (fail)
+            destlen >>= 1;
+        dest = malloc(destlen);
+        if (dest == NULL) {
+            fprintf(stderr, "memory allocation failure\n");
+            free(source);
+            return 4;
+        }
+        puff(dest, &destlen, source + skip, &sourcelen);
+        SET_BINARY_MODE(stdout);
+        fwrite(dest, 1, destlen, stdout);
+        free(dest);
+    }
+
+    /* clean up */
+    free(source);
+    return ret;
+}
diff --git a/contrib/puff/zeros.raw b/contrib/puff/zeros.raw
index 637b7be..0a90e76 100644
--- a/contrib/puff/zeros.raw
+++ b/contrib/puff/zeros.raw
Binary files differ
diff --git a/contrib/vstudio/vc10/zlib.rc b/contrib/vstudio/vc10/zlib.rc
index f822450..00034ea 100644
--- a/contrib/vstudio/vc10/zlib.rc
+++ b/contrib/vstudio/vc10/zlib.rc
@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,5,0
-  PRODUCTVERSION 1,2,5,0
+  FILEVERSION	 1.2.5.1,1
+  PRODUCTVERSION 1.2.5.1,1
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.5\0"
+      VALUE "FileVersion",	"1.2.5.1\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
diff --git a/contrib/vstudio/vc10/zlibvc.def b/contrib/vstudio/vc10/zlibvc.def
index 0269ef7..ad8b4af 100644
--- a/contrib/vstudio/vc10/zlibvc.def
+++ b/contrib/vstudio/vc10/zlibvc.def
@@ -55,6 +55,7 @@
         gzungetc                                 @49
         zlibCompileFlags                         @50
         deflatePrime                             @51
+        deflatePending                           @52
 
         unzOpen                                  @61
         unzClose                                 @62
diff --git a/contrib/vstudio/vc9/zlib.rc b/contrib/vstudio/vc9/zlib.rc
index f822450..00034ea 100644
--- a/contrib/vstudio/vc9/zlib.rc
+++ b/contrib/vstudio/vc9/zlib.rc
@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,5,0
-  PRODUCTVERSION 1,2,5,0
+  FILEVERSION	 1.2.5.1,1
+  PRODUCTVERSION 1.2.5.1,1
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.5\0"
+      VALUE "FileVersion",	"1.2.5.1\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
diff --git a/contrib/vstudio/vc9/zlibvc.def b/contrib/vstudio/vc9/zlibvc.def
index 0269ef7..ad8b4af 100644
--- a/contrib/vstudio/vc9/zlibvc.def
+++ b/contrib/vstudio/vc9/zlibvc.def
@@ -55,6 +55,7 @@
         gzungetc                                 @49
         zlibCompileFlags                         @50
         deflatePrime                             @51
+        deflatePending                           @52
 
         unzOpen                                  @61
         unzClose                                 @62
diff --git a/crc32.c b/crc32.c
index 91be372..c12471e 100644
--- a/crc32.c
+++ b/crc32.c
@@ -1,5 +1,5 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006, 2010 Mark Adler
+ * Copyright (C) 1995-2006, 2010, 2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -17,6 +17,8 @@
   of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
   first call get_crc_table() to initialize the tables before allowing more than
   one thread to use crc32().
+
+  DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
  */
 
 #ifdef MAKECRCH
@@ -53,6 +55,7 @@
 
 /* Definitions for doing the crc four data bytes at a time. */
 #ifdef BYFOUR
+   typedef u4 crc_table_t;
 #  define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
                 (((w)&0xff00)<<8)+(((w)&0xff)<<24))
    local unsigned long crc32_little OF((unsigned long,
@@ -61,6 +64,7 @@
                         const unsigned char FAR *, unsigned));
 #  define TBLS 8
 #else
+   typedef unsigned long crc_table_t;
 #  define TBLS 1
 #endif /* BYFOUR */
 
@@ -68,16 +72,16 @@
 local unsigned long gf2_matrix_times OF((unsigned long *mat,
                                          unsigned long vec));
 local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
-local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
 
 
 #ifdef DYNAMIC_CRC_TABLE
 
 local volatile int crc_table_empty = 1;
-local unsigned long FAR crc_table[TBLS][256];
+local crc_table_t FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
 #ifdef MAKECRCH
-   local void write_table OF((FILE *, const unsigned long FAR *));
+   local void write_table OF((FILE *, const crc_table_t FAR *));
 #endif /* MAKECRCH */
 /*
   Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -107,9 +111,9 @@
 */
 local void make_crc_table()
 {
-    unsigned long c;
+    crc_table_t c;
     int n, k;
-    unsigned long poly;                 /* polynomial exclusive-or pattern */
+    crc_table_t poly;                   /* polynomial exclusive-or pattern */
     /* terms of polynomial defining this crc (except x^32): */
     static volatile int first = 1;      /* flag to limit concurrent making */
     static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
@@ -121,13 +125,13 @@
         first = 0;
 
         /* make exclusive-or pattern from polynomial (0xedb88320UL) */
-        poly = 0UL;
-        for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
-            poly |= 1UL << (31 - p[n]);
+        poly = 0;
+        for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+            poly |= (crc_table_t)1 << (31 - p[n]);
 
         /* generate a crc for every 8-bit value */
         for (n = 0; n < 256; n++) {
-            c = (unsigned long)n;
+            c = (crc_table_t)n;
             for (k = 0; k < 8; k++)
                 c = c & 1 ? poly ^ (c >> 1) : c >> 1;
             crc_table[0][n] = c;
@@ -164,7 +168,7 @@
         if (out == NULL) return;
         fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
         fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const unsigned long FAR ");
+        fprintf(out, "local const crc_table_t FAR ");
         fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
         write_table(out, crc_table[0]);
 #  ifdef BYFOUR
@@ -184,12 +188,13 @@
 #ifdef MAKECRCH
 local void write_table(out, table)
     FILE *out;
-    const unsigned long FAR *table;
+    const crc_table_t FAR *table;
 {
     int n;
 
     for (n = 0; n < 256; n++)
-        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ", table[n],
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ",
+                (unsigned long)(table[n]),
                 n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
 }
 #endif /* MAKECRCH */
diff --git a/crc32.h b/crc32.h
index 8053b61..c3e7171 100644
--- a/crc32.h
+++ b/crc32.h
@@ -2,7 +2,7 @@
  * Generated automatically by crc32.c
  */
 
-local const unsigned long FAR crc_table[TBLS][256] =
+local const crc_table_t FAR crc_table[TBLS][256] =
 {
   {
     0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
diff --git a/deflate.c b/deflate.c
index 5c4022f..01d094e 100644
--- a/deflate.c
+++ b/deflate.c
@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -37,7 +37,7 @@
  *  REFERENCES
  *
  *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in http://www.ietf.org/rfc/rfc1951.txt
+ *      Available in http://tools.ietf.org/html/rfc1951
  *
  *      A description of the Rabin and Karp algorithm is given in the book
  *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.5.1 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -397,6 +397,18 @@
 }
 
 /* ========================================================================= */
+int ZEXPORT deflatePending (strm, pending, bits)
+    unsigned *pending;
+    int *bits;
+    z_streamp strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    *pending = strm->state->pending;
+    *bits = strm->state->bi_valid;
+    return Z_OK;
+}
+
+/* ========================================================================= */
 int ZEXPORT deflatePrime (strm, bits, value)
     z_streamp strm;
     int bits;
@@ -1001,15 +1013,15 @@
 
     strm->avail_in  -= len;
 
+    zmemcpy(buf, strm->next_in, len);
     if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
+        strm->adler = adler32(strm->adler, buf, len);
     }
 #ifdef GZIP
     else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, strm->next_in, len);
+        strm->adler = crc32(strm->adler, buf, len);
     }
 #endif
-    zmemcpy(buf, strm->next_in, len);
     strm->next_in  += len;
     strm->total_in += len;
 
diff --git a/deflate.h b/deflate.h
index cbf0d1e..442e14a 100644
--- a/deflate.h
+++ b/deflate.h
@@ -188,7 +188,7 @@
     int nice_match; /* Stop searching when current match exceeds this */
 
                 /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
+    /* Didn't use ct_data typedef below to suppress compiler warning */
     struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
     struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
     struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
diff --git a/doc/algorithm.txt b/doc/algorithm.txt
index 34960bd..c97f495 100644
--- a/doc/algorithm.txt
+++ b/doc/algorithm.txt
@@ -206,4 +206,4 @@
 pp. 337-343.
 
 ``DEFLATE Compressed Data Format Specification'' available in
-http://www.ietf.org/rfc/rfc1951.txt
+http://tools.ietf.org/html/rfc1951
diff --git a/example.c b/example.c
index 604736f..c15cc03 100644
--- a/example.c
+++ b/example.c
@@ -1,5 +1,5 @@
 /* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2006 Jean-loup Gailly.
+ * Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -438,7 +438,7 @@
     CHECK_ERR(err, "deflateInit");
 
     err = deflateSetDictionary(&c_stream,
-                               (const Bytef*)dictionary, sizeof(dictionary));
+                (const Bytef*)dictionary, (int)sizeof(dictionary));
     CHECK_ERR(err, "deflateSetDictionary");
 
     dictId = c_stream.adler;
@@ -491,7 +491,7 @@
                 exit(1);
             }
             err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
-                                       sizeof(dictionary));
+                                       (int)sizeof(dictionary));
         }
         CHECK_ERR(err, "inflate with dict");
     }
diff --git a/gzlib.c b/gzlib.c
index 603e60e..d16b249 100644
--- a/gzlib.c
+++ b/gzlib.c
@@ -91,6 +91,10 @@
 {
     gz_statep state;
 
+    /* check input */
+    if (path == NULL)
+        return NULL;
+
     /* allocate gzFile structure to return */
     state = malloc(sizeof(gz_state));
     if (state == NULL)
diff --git a/gzwrite.c b/gzwrite.c
index e8defc6..0ea2994 100644
--- a/gzwrite.c
+++ b/gzwrite.c
@@ -1,5 +1,5 @@
 /* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -274,7 +274,7 @@
     return ret == 0 && len != 0 ? -1 : ret;
 }
 
-#ifdef STDC
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
 #include <stdarg.h>
 
 /* -- see zlib.h -- */
@@ -346,7 +346,7 @@
     return len;
 }
 
-#else /* !STDC */
+#else /* !STDC && !Z_HAVE_STDARG_H */
 
 /* -- see zlib.h -- */
 int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
@@ -366,6 +366,10 @@
     state = (gz_statep)file;
     strm = &(state->strm);
 
+    /* check that can really pass pointer in ints */
+    if (sizeof(int) != sizeof(void *))
+        return 0;
+
     /* check that we're writing and that there's no error */
     if (state->mode != GZ_WRITE || state->err != Z_OK)
         return 0;
diff --git a/inftrees.c b/inftrees.c
index 11e9c52..2022e96 100644
--- a/inftrees.c
+++ b/inftrees.c
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.5 Copyright 1995-2010 Mark Adler ";
+   " inflate 1.2.5.1 Copyright 1995-2010 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 73, 195};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 205, 203};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
diff --git a/old/as400/compile.clp b/old/as400/compile.clp
deleted file mode 100644
index 8554951..0000000
--- a/old/as400/compile.clp
+++ /dev/null
@@ -1,123 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/*  ZLIB                                                                      */
-/*                                                                            */
-/*    Compile sources into modules and link them into a service program.      */
-/*                                                                            */
-/******************************************************************************/
-
-             PGM
-
-/*      Configuration adjustable parameters.                                  */
-
-             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('ZLIB')                         /* Source library. */
-             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
-                          VALUE('SOURCES')                      /* Source member file. */
-             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
-                          VALUE('TOOLS')                        /* Control member file. */
-
-             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('ZLIB')                         /* Module library. */
-
-             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('LGPL')                         /* Service program library. */
-
-             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
-                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
-
-
-/*      Working storage.                                                      */
-
-             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
-             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
-
-
-/*      Compile sources into modules.                                         */
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/ADLER32)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/COMPRESS)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/CRC32)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/DEFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/GZIO)                  SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFBACK)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFFAST)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFTREES)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/TREES)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/UNCOMPR)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/ZUTIL)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-
-/*      Link modules into a service program.                                  */
-
-             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
-                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
-                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
-                                 &MODLIB/GZIO        &MODLIB/INFBACK     +
-                                 &MODLIB/INFFAST     &MODLIB/INFLATE     +
-                                 &MODLIB/INFTREES    &MODLIB/TREES       +
-                                 &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
-                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
-                          TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
-
-             ENDPGM
diff --git a/qnx/package.qpg b/qnx/package.qpg
index 2bc63b2..c75c4b3 100644
--- a/qnx/package.qpg
+++ b/qnx/package.qpg
@@ -25,10 +25,10 @@
       <QPG:Files>
          <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
          <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.5" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.5"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.5"/>
-         <QPG:Add file="../libz.so.1.2.5" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.2.5.1" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.5.1"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.5.1"/>
+         <QPG:Add file="../libz.so.1.2.5.1" install="/opt/lib/" component="slib"/>
       </QPG:Files>
 
       <QPG:PackageFilter>
@@ -63,7 +63,7 @@
             </QPM:ProductDescription>
 
             <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.5</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.2.5.1</QPM:ReleaseVersion>
                <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
                <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
                <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
diff --git a/treebuild.xml b/treebuild.xml
index 6b8f542..b966b2b 100644
--- a/treebuild.xml
+++ b/treebuild.xml
@@ -1,6 +1,6 @@
 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.5">
-    <library name="zlib" dlversion="1.2.5" dlname="z">
+<package name="zlib" version="1.2.5.1">
+    <library name="zlib" dlversion="1.2.5.1" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
 
diff --git a/win32/Makefile.gcc b/win32/Makefile.gcc
index 0a33bf6..43825c0 100644
--- a/win32/Makefile.gcc
+++ b/win32/Makefile.gcc
@@ -25,7 +25,7 @@
 
 STATICLIB = libz.a
 SHAREDLIB = zlib1.dll
-IMPLIB    = libzdll.a
+IMPLIB    = libz.dll.a
 
 #
 # Set to 1 if shared object needs to be installed
@@ -59,7 +59,7 @@
 INSTALL = $(CP)
 RM = rm -f
 
-prefix = /usr/local
+prefix ?= /usr/local
 exec_prefix = $(prefix)
 
 OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
@@ -118,7 +118,7 @@
 
 install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
 	-@mkdir -p $(INCLUDE_PATH)
-	-@mkdir -p $(LIBRARY_PATH)
+	-@mkdir -p $(LIBRARY_PATH) $(LIBRARY_PATH)/pkgconfig
 	-if [ "$(SHARED_MODE)" = "1" ]; then \
 		mkdir -p $(BINARY_PATH); \
 		$(INSTALL) $(SHAREDLIB) $(BINARY_PATH); \
@@ -127,6 +127,14 @@
 	-$(INSTALL) zlib.h $(INCLUDE_PATH)
 	-$(INSTALL) zconf.h $(INCLUDE_PATH)
 	-$(INSTALL) $(STATICLIB) $(LIBRARY_PATH)
+	sed \
+		-e 's|@prefix@|${prefix}|g' \
+		-e 's|@exec_prefix@|${exec_prefix}|g' \
+		-e 's|@libdir@|$(LIBRARY_PATH)|g' \
+		-e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \
+		-e 's|@includedir@|$(INCLUDE_PATH)|g' \
+		-e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \
+		zlib.pc.in > $(LIBRARY_PATH)/pkgconfig/zlib.pc
 
 uninstall:
 	-if [ "$(SHARED_MODE)" = "1" ]; then \
diff --git a/win32/Makefile.msc b/win32/Makefile.msc
index fa10a1a..2714b45 100644
--- a/win32/Makefile.msc
+++ b/win32/Makefile.msc
@@ -30,7 +30,7 @@
 RCFLAGS = /dWIN32 /r
 
 OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \
-       gzwrite.obj infback.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+       gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj
 OBJA =
 
 
diff --git a/win32/zlib.def b/win32/zlib.def
index 03df8bf..d2e09f2 100644
--- a/win32/zlib.def
+++ b/win32/zlib.def
@@ -15,6 +15,7 @@
     deflateParams
     deflateTune
     deflateBound
+    deflatePending
     deflatePrime
     deflateSetHeader
     inflateSetDictionary
diff --git a/zconf.h b/zconf.h
index 02ce56c..1c06556 100644
--- a/zconf.h
+++ b/zconf.h
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -15,6 +15,7 @@
  * this permanently in zconf.h using "./configure --zprefix".
  */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
 
 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -40,6 +41,7 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
 #  define deflateSetDictionary  z_deflateSetDictionary
@@ -243,6 +245,14 @@
 #  endif
 #endif
 
+#ifndef ON /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define ON(args)  args
+#  else
+#    define ON(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
  * model programming (small or medium model with some far allocations).
  * This was tested only with MSC; for other MSDOS compilers you may have
@@ -360,6 +370,10 @@
 #  define Z_HAVE_UNISTD_H
 #endif
 
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
 #ifdef STDC
 #  include <sys/types.h>    /* for off_t */
 #endif
@@ -374,7 +388,11 @@
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
diff --git a/zconf.h.cmakein b/zconf.h.cmakein
index a2f71b1..4a5d9ea 100644
--- a/zconf.h.cmakein
+++ b/zconf.h.cmakein
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -17,6 +17,7 @@
  * this permanently in zconf.h using "./configure --zprefix".
  */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
 
 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -42,6 +43,7 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
 #  define deflateSetDictionary  z_deflateSetDictionary
@@ -245,6 +247,14 @@
 #  endif
 #endif
 
+#ifndef ON /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define ON(args)  args
+#  else
+#    define ON(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
  * model programming (small or medium model with some far allocations).
  * This was tested only with MSC; for other MSDOS compilers you may have
@@ -362,6 +372,10 @@
 #  define Z_HAVE_UNISTD_H
 #endif
 
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
 #ifdef STDC
 #  include <sys/types.h>    /* for off_t */
 #endif
@@ -376,7 +390,11 @@
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
diff --git a/zconf.h.in b/zconf.h.in
index 02ce56c..1c06556 100644
--- a/zconf.h.in
+++ b/zconf.h.in
@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -15,6 +15,7 @@
  * this permanently in zconf.h using "./configure --zprefix".
  */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
 
 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -40,6 +41,7 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
 #  define deflateSetDictionary  z_deflateSetDictionary
@@ -243,6 +245,14 @@
 #  endif
 #endif
 
+#ifndef ON /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define ON(args)  args
+#  else
+#    define ON(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
  * model programming (small or medium model with some far allocations).
  * This was tested only with MSC; for other MSDOS compilers you may have
@@ -360,6 +370,10 @@
 #  define Z_HAVE_UNISTD_H
 #endif
 
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
 #ifdef STDC
 #  include <sys/types.h>    /* for off_t */
 #endif
@@ -374,7 +388,11 @@
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
diff --git a/zlib.3 b/zlib.3
index 27adc4c..66100be 100644
--- a/zlib.3
+++ b/zlib.3
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "19 Apr 2010"
+.TH ZLIB 3 "10 Sep 2011"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -95,11 +95,11 @@
 The data format used by the zlib library is described by RFC
 (Request for Comments) 1950 to 1952 in the files:
 .IP
-http://www.ietf.org/rfc/rfc1950.txt (for the zlib header and trailer format)
+http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format)
 .br
-http://www.ietf.org/rfc/rfc1951.txt (for the deflate compressed data format)
+http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format)
 .br
-http://www.ietf.org/rfc/rfc1952.txt (for the gzip header and trailer format)
+http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format)
 .LP
 Mark Nelson wrote an article about
 .I zlib
@@ -125,8 +125,8 @@
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS
-Version 1.2.5
-Copyright (C) 1995-2010 Jean-loup Gailly (jloup@gzip.org)
+Version 1.2.5.1
+Copyright (C) 1995-2011 Jean-loup Gailly (jloup@gzip.org)
 and Mark Adler (madler@alumni.caltech.edu).
 .LP
 This software is provided "as-is,"
diff --git a/zlib.3.pdf b/zlib.3.pdf
index 9f8a2c3..b253797 100644
--- a/zlib.3.pdf
+++ b/zlib.3.pdf
Binary files differ
diff --git a/zlib.h b/zlib.h
index bfbba83..7c0a2d8 100644
--- a/zlib.h
+++ b/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.5, April 19th, 2010
+  version 1.2.5.1, September 10th, 2011
 
-  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -24,8 +24,8 @@
 
 
   The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
 */
 
 #ifndef ZLIB_H
@@ -37,12 +37,12 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.5"
-#define ZLIB_VERNUM 0x1250
+#define ZLIB_VERSION "1.2.5.1"
+#define ZLIB_VERNUM 0x1251
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
 #define ZLIB_VER_REVISION 5
-#define ZLIB_VER_SUBREVISION 0
+#define ZLIB_VER_SUBREVISION 1
 
 /*
     The 'zlib' compression library provides in-memory compression and
@@ -85,11 +85,11 @@
 typedef struct z_stream_s {
     Bytef    *next_in;  /* next input byte */
     uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
+    uLong    total_in;  /* total number of input bytes read so far */
 
     Bytef    *next_out; /* next output byte should be put there */
     uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
+    uLong    total_out; /* total number of bytes output so far */
 
     char     *msg;      /* last error message, NULL if no error */
     struct internal_state FAR *state; /* not visible by applications */
@@ -327,8 +327,9 @@
 
     Z_FINISH can be used immediately after deflateInit if all the compression
   is to be done in a single step.  In this case, avail_out must be at least the
-  value returned by deflateBound (see below).  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
+  value returned by deflateBound (see below).  Then deflate is guaranteed to
+  return Z_STREAM_END.  If not enough output space is provided, deflate will
+  not return Z_STREAM_END, and it must be called again as described above.
 
     deflate() sets strm->adler to the adler32 checksum of all input read
   so far (that is, total_in bytes).
@@ -688,8 +689,27 @@
    deflation of sourceLen bytes.  It must be called after deflateInit() or
    deflateInit2(), and after deflateSetHeader(), if used.  This would be used
    to allocate an output buffer for deflation in a single pass, and so would be
-   called before deflate().
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
 */
+    
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.
+ 
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */
 
 ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
                                      int bits,
@@ -805,17 +825,21 @@
 
 ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
 /*
-     Skips invalid compressed data until a full flush point (see above the
-   description of deflate with Z_FULL_FLUSH) can be found, or until all
+     Skips invalid compressed data until a possible full flush point (see above
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
    available input is skipped.  No output is provided.
 
-     inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
-   if no more input was provided, Z_DATA_ERROR if no flush point has been
-   found, or Z_STREAM_ERROR if the stream structure was inconsistent.  In the
-   success case, the application may save the current current value of total_in
-   which indicates where valid compressed data was found.  In the error case,
-   the application may repeatedly call inflateSync, providing more input each
-   time, until success or end of the input data.
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+   All full flush points have this pattern, but not all occurences of this
+   pattern are full flush points.
+
+     inflateSync returns Z_OK if a possible full flush point has been found,
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
 */
 
 ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
@@ -962,7 +986,7 @@
      See inflateBack() for the usage of these routines.
 
      inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
-   the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
    allocated, or Z_VERSION_ERROR if the version of the library does not match
    the version of the header file.
 */
@@ -1256,7 +1280,7 @@
    error.
 */
 
-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf ON((gzFile file, const char *format, ...));
 /*
      Converts, formats, and writes the arguments to the compressed file under
    control of the format string, as in fprintf.  gzprintf returns the number of
@@ -1492,7 +1516,9 @@
      Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
    and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
    each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
-   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
 */
 
 ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
@@ -1544,17 +1570,18 @@
                                          const char *version,
                                          int stream_size));
 #define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+        deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
 #define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+        inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
 #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
         deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+                      (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
 #define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                      (int)sizeof(z_stream))
 #define inflateBackInit(strm, windowBits, window) \
         inflateBackInit_((strm), (windowBits), (window), \
-                                            ZLIB_VERSION, sizeof(z_stream))
+                      ZLIB_VERSION, (int)sizeof(z_stream))
 
 /* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
  * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
@@ -1572,13 +1599,22 @@
 #endif
 
 #if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
-#  define gzopen gzopen64
-#  define gzseek gzseek64
-#  define gztell gztell64
-#  define gzoffset gzoffset64
-#  define adler32_combine adler32_combine64
-#  define crc32_combine crc32_combine64
-#  ifdef _LARGEFILE64_SOURCE
+#  ifdef Z_PREFIX_SET
+#    define z_gzopen z_gzopen64
+#    define z_gzseek z_gzseek64
+#    define z_gztell z_gztell64
+#    define z_gzoffset z_gzoffset64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#  else
+#    define gzopen gzopen64
+#    define gzseek gzseek64
+#    define gztell gztell64
+#    define gzoffset gzoffset64
+#    define adler32_combine adler32_combine64
+#    define crc32_combine crc32_combine64
+#  endif
+#  ifndef _LARGEFILE64_SOURCE
      ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
      ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
      ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
diff --git a/zlib.map b/zlib.map
index f282d36..65bcf17 100644
--- a/zlib.map
+++ b/zlib.map
@@ -66,3 +66,7 @@
     gzclose_r;
     gzclose_w;
 } ZLIB_1.2.3.4;
+
+ZLIB_1.2.5.1 {
+    deflatePending;
+} ZLIB_1.2.5;
diff --git a/zutil.c b/zutil.c
index 898ed34..2ccee81 100644
--- a/zutil.c
+++ b/zutil.c
@@ -1,5 +1,5 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2005, 2010, 2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -85,7 +85,7 @@
 #ifdef FASTEST
     flags += 1L << 21;
 #endif
-#ifdef STDC
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
 #  ifdef NO_vsnprintf
         flags += 1L << 25;
 #    ifdef HAS_vsprintf_void