# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=bdver2 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 < %s | FileCheck %s

# LLVM-MCA-BEGIN
movb %spl, (%rax)
movb (%rcx), %bpl
movb (%rdx), %sil
movb %dil, (%rbx)
# LLVM-MCA-END

# LLVM-MCA-BEGIN
movw %sp, (%rax)
movw (%rcx), %bp
movw (%rdx), %si
movw %di, (%rbx)
# LLVM-MCA-END

# LLVM-MCA-BEGIN
movl %esp, (%rax)
movl (%rcx), %ebp
movl (%rdx), %esi
movl %edi, (%rbx)
# LLVM-MCA-END

# LLVM-MCA-BEGIN
movq %rsp, (%rax)
movq (%rcx), %rbp
movq (%rdx), %rsi
movq %rdi, (%rbx)
# LLVM-MCA-END

# LLVM-MCA-BEGIN
movd %mm0, (%rax)
movd (%rcx), %mm1
movd (%rdx), %mm2
movd %mm3, (%rbx)
# LLVM-MCA-END

# LLVM-MCA-BEGIN
movaps %xmm0, (%rax)
movaps (%rcx), %xmm1
movaps (%rdx), %xmm2
movaps %xmm3, (%rbx)
# LLVM-MCA-END

# CHECK:      [0] Code Region

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      400
# CHECK-NEXT: Total Cycles:      306
# CHECK-NEXT: Total uOps:        400

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    1.31
# CHECK-NEXT: IPC:               1.31
# CHECK-NEXT: Block RThroughput: 3.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     1.00           *            movb	%spl, (%rax)
# CHECK-NEXT:  1      5     1.00    *                   movb	(%rcx), %bpl
# CHECK-NEXT:  1      5     1.00    *                   movb	(%rdx), %sil
# CHECK-NEXT:  1      1     1.00           *            movb	%dil, (%rbx)

# CHECK:      Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT     - Register unavailable:                      0
# CHECK-NEXT: RCU     - Retire tokens unavailable:                 0
# CHECK-NEXT: SCHEDQ  - Scheduler full:                            256  (83.7%)
# CHECK-NEXT: LQ      - Load queue full:                           0
# CHECK-NEXT: SQ      - Store queue full:                          0
# CHECK-NEXT: GROUP   - Static restrictions on the dispatch group: 0

# CHECK:      Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT:  0,              35  (11.4%)
# CHECK-NEXT:  1,              171  (55.9%)
# CHECK-NEXT:  2,              85  (27.8%)
# CHECK-NEXT:  3,              1  (0.3%)
# CHECK-NEXT:  4,              14  (4.6%)

# CHECK:      Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT:  0,          6  (2.0%)
# CHECK-NEXT:  1,          200  (65.4%)
# CHECK-NEXT:  2,          100  (32.7%)

# CHECK:      Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.

# CHECK:       [1]            [2]        [3]        [4]
# CHECK-NEXT: PdEX             36         40         40
# CHECK-NEXT: PdFPU            0          0          64
# CHECK-NEXT: PdLoad           21         24         40
# CHECK-NEXT: PdStore          18         21         24

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1]   - PdBranch
# CHECK-NEXT: [2]   - PdCount
# CHECK-NEXT: [3]   - PdDiv
# CHECK-NEXT: [4]   - PdEX0
# CHECK-NEXT: [5]   - PdEX1
# CHECK-NEXT: [6]   - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9]   - PdFPMMA
# CHECK-NEXT: [10]  - PdFPSTO
# CHECK-NEXT: [11]  - PdFPU0
# CHECK-NEXT: [12]  - PdFPU1
# CHECK-NEXT: [13]  - PdFPU2
# CHECK-NEXT: [14]  - PdFPU3
# CHECK-NEXT: [15]  - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17]  - PdMul
# CHECK-NEXT: [18]  - PdStore

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]
# CHECK-NEXT: 3.00   3.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00   2.00    -     2.00

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]   Instructions:
# CHECK-NEXT:  -     1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movb	%spl, (%rax)
# CHECK-NEXT: 2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -     movb	(%rcx), %bpl
# CHECK-NEXT:  -     2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -      -     movb	(%rdx), %sil
# CHECK-NEXT: 1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movb	%dil, (%rbx)

# CHECK:      Timeline view:
# CHECK-NEXT: Index     012345678

# CHECK:      [0,0]     DeER .  .   movb	%spl, (%rax)
# CHECK-NEXT: [0,1]     DeeeeeER.   movb	(%rcx), %bpl
# CHECK-NEXT: [0,2]     D=eeeeeER   movb	(%rdx), %sil
# CHECK-NEXT: [0,3]     D==eE---R   movb	%dil, (%rbx)

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     1     1.0    1.0    0.0       movb	%spl, (%rax)
# CHECK-NEXT: 1.     1     1.0    1.0    0.0       movb	(%rcx), %bpl
# CHECK-NEXT: 2.     1     2.0    2.0    0.0       movb	(%rdx), %sil
# CHECK-NEXT: 3.     1     3.0    1.0    3.0       movb	%dil, (%rbx)
# CHECK-NEXT:        1     1.8    1.3    0.8       <total>

# CHECK:      [1] Code Region

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      400
# CHECK-NEXT: Total Cycles:      306
# CHECK-NEXT: Total uOps:        400

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    1.31
# CHECK-NEXT: IPC:               1.31
# CHECK-NEXT: Block RThroughput: 3.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     1.00           *            movw	%sp, (%rax)
# CHECK-NEXT:  1      5     1.00    *                   movw	(%rcx), %bp
# CHECK-NEXT:  1      5     1.00    *                   movw	(%rdx), %si
# CHECK-NEXT:  1      1     1.00           *            movw	%di, (%rbx)

# CHECK:      Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT     - Register unavailable:                      0
# CHECK-NEXT: RCU     - Retire tokens unavailable:                 0
# CHECK-NEXT: SCHEDQ  - Scheduler full:                            256  (83.7%)
# CHECK-NEXT: LQ      - Load queue full:                           0
# CHECK-NEXT: SQ      - Store queue full:                          0
# CHECK-NEXT: GROUP   - Static restrictions on the dispatch group: 0

# CHECK:      Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT:  0,              35  (11.4%)
# CHECK-NEXT:  1,              171  (55.9%)
# CHECK-NEXT:  2,              85  (27.8%)
# CHECK-NEXT:  3,              1  (0.3%)
# CHECK-NEXT:  4,              14  (4.6%)

# CHECK:      Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT:  0,          6  (2.0%)
# CHECK-NEXT:  1,          200  (65.4%)
# CHECK-NEXT:  2,          100  (32.7%)

# CHECK:      Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.

# CHECK:       [1]            [2]        [3]        [4]
# CHECK-NEXT: PdEX             36         40         40
# CHECK-NEXT: PdFPU            0          0          64
# CHECK-NEXT: PdLoad           21         24         40
# CHECK-NEXT: PdStore          18         21         24

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1]   - PdBranch
# CHECK-NEXT: [2]   - PdCount
# CHECK-NEXT: [3]   - PdDiv
# CHECK-NEXT: [4]   - PdEX0
# CHECK-NEXT: [5]   - PdEX1
# CHECK-NEXT: [6]   - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9]   - PdFPMMA
# CHECK-NEXT: [10]  - PdFPSTO
# CHECK-NEXT: [11]  - PdFPU0
# CHECK-NEXT: [12]  - PdFPU1
# CHECK-NEXT: [13]  - PdFPU2
# CHECK-NEXT: [14]  - PdFPU3
# CHECK-NEXT: [15]  - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17]  - PdMul
# CHECK-NEXT: [18]  - PdStore

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]
# CHECK-NEXT: 3.00   3.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00   2.00    -     2.00

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]   Instructions:
# CHECK-NEXT:  -     1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movw	%sp, (%rax)
# CHECK-NEXT: 2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -     movw	(%rcx), %bp
# CHECK-NEXT:  -     2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -      -     movw	(%rdx), %si
# CHECK-NEXT: 1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movw	%di, (%rbx)

# CHECK:      Timeline view:
# CHECK-NEXT: Index     012345678

# CHECK:      [0,0]     DeER .  .   movw	%sp, (%rax)
# CHECK-NEXT: [0,1]     DeeeeeER.   movw	(%rcx), %bp
# CHECK-NEXT: [0,2]     D=eeeeeER   movw	(%rdx), %si
# CHECK-NEXT: [0,3]     D==eE---R   movw	%di, (%rbx)

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     1     1.0    1.0    0.0       movw	%sp, (%rax)
# CHECK-NEXT: 1.     1     1.0    1.0    0.0       movw	(%rcx), %bp
# CHECK-NEXT: 2.     1     2.0    2.0    0.0       movw	(%rdx), %si
# CHECK-NEXT: 3.     1     3.0    1.0    3.0       movw	%di, (%rbx)
# CHECK-NEXT:        1     1.8    1.3    0.8       <total>

# CHECK:      [2] Code Region

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      400
# CHECK-NEXT: Total Cycles:      306
# CHECK-NEXT: Total uOps:        400

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    1.31
# CHECK-NEXT: IPC:               1.31
# CHECK-NEXT: Block RThroughput: 3.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     1.00           *            movl	%esp, (%rax)
# CHECK-NEXT:  1      5     1.00    *                   movl	(%rcx), %ebp
# CHECK-NEXT:  1      5     1.00    *                   movl	(%rdx), %esi
# CHECK-NEXT:  1      1     1.00           *            movl	%edi, (%rbx)

# CHECK:      Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT     - Register unavailable:                      0
# CHECK-NEXT: RCU     - Retire tokens unavailable:                 0
# CHECK-NEXT: SCHEDQ  - Scheduler full:                            256  (83.7%)
# CHECK-NEXT: LQ      - Load queue full:                           0
# CHECK-NEXT: SQ      - Store queue full:                          0
# CHECK-NEXT: GROUP   - Static restrictions on the dispatch group: 0

# CHECK:      Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT:  0,              35  (11.4%)
# CHECK-NEXT:  1,              171  (55.9%)
# CHECK-NEXT:  2,              85  (27.8%)
# CHECK-NEXT:  3,              1  (0.3%)
# CHECK-NEXT:  4,              14  (4.6%)

# CHECK:      Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT:  0,          6  (2.0%)
# CHECK-NEXT:  1,          200  (65.4%)
# CHECK-NEXT:  2,          100  (32.7%)

# CHECK:      Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.

# CHECK:       [1]            [2]        [3]        [4]
# CHECK-NEXT: PdEX             36         40         40
# CHECK-NEXT: PdFPU            0          0          64
# CHECK-NEXT: PdLoad           21         24         40
# CHECK-NEXT: PdStore          18         21         24

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1]   - PdBranch
# CHECK-NEXT: [2]   - PdCount
# CHECK-NEXT: [3]   - PdDiv
# CHECK-NEXT: [4]   - PdEX0
# CHECK-NEXT: [5]   - PdEX1
# CHECK-NEXT: [6]   - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9]   - PdFPMMA
# CHECK-NEXT: [10]  - PdFPSTO
# CHECK-NEXT: [11]  - PdFPU0
# CHECK-NEXT: [12]  - PdFPU1
# CHECK-NEXT: [13]  - PdFPU2
# CHECK-NEXT: [14]  - PdFPU3
# CHECK-NEXT: [15]  - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17]  - PdMul
# CHECK-NEXT: [18]  - PdStore

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]
# CHECK-NEXT: 3.00   3.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00   2.00    -     2.00

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]   Instructions:
# CHECK-NEXT:  -     1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movl	%esp, (%rax)
# CHECK-NEXT: 2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -     movl	(%rcx), %ebp
# CHECK-NEXT:  -     2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -      -     movl	(%rdx), %esi
# CHECK-NEXT: 1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movl	%edi, (%rbx)

# CHECK:      Timeline view:
# CHECK-NEXT: Index     012345678

# CHECK:      [0,0]     DeER .  .   movl	%esp, (%rax)
# CHECK-NEXT: [0,1]     DeeeeeER.   movl	(%rcx), %ebp
# CHECK-NEXT: [0,2]     D=eeeeeER   movl	(%rdx), %esi
# CHECK-NEXT: [0,3]     D==eE---R   movl	%edi, (%rbx)

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     1     1.0    1.0    0.0       movl	%esp, (%rax)
# CHECK-NEXT: 1.     1     1.0    1.0    0.0       movl	(%rcx), %ebp
# CHECK-NEXT: 2.     1     2.0    2.0    0.0       movl	(%rdx), %esi
# CHECK-NEXT: 3.     1     3.0    1.0    3.0       movl	%edi, (%rbx)
# CHECK-NEXT:        1     1.8    1.3    0.8       <total>

# CHECK:      [3] Code Region

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      400
# CHECK-NEXT: Total Cycles:      306
# CHECK-NEXT: Total uOps:        400

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    1.31
# CHECK-NEXT: IPC:               1.31
# CHECK-NEXT: Block RThroughput: 3.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     1.00           *            movq	%rsp, (%rax)
# CHECK-NEXT:  1      5     1.00    *                   movq	(%rcx), %rbp
# CHECK-NEXT:  1      5     1.00    *                   movq	(%rdx), %rsi
# CHECK-NEXT:  1      1     1.00           *            movq	%rdi, (%rbx)

# CHECK:      Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT     - Register unavailable:                      0
# CHECK-NEXT: RCU     - Retire tokens unavailable:                 0
# CHECK-NEXT: SCHEDQ  - Scheduler full:                            256  (83.7%)
# CHECK-NEXT: LQ      - Load queue full:                           0
# CHECK-NEXT: SQ      - Store queue full:                          0
# CHECK-NEXT: GROUP   - Static restrictions on the dispatch group: 0

# CHECK:      Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT:  0,              35  (11.4%)
# CHECK-NEXT:  1,              171  (55.9%)
# CHECK-NEXT:  2,              85  (27.8%)
# CHECK-NEXT:  3,              1  (0.3%)
# CHECK-NEXT:  4,              14  (4.6%)

# CHECK:      Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT:  0,          6  (2.0%)
# CHECK-NEXT:  1,          200  (65.4%)
# CHECK-NEXT:  2,          100  (32.7%)

# CHECK:      Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.

# CHECK:       [1]            [2]        [3]        [4]
# CHECK-NEXT: PdEX             36         40         40
# CHECK-NEXT: PdFPU            0          0          64
# CHECK-NEXT: PdLoad           21         24         40
# CHECK-NEXT: PdStore          18         21         24

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1]   - PdBranch
# CHECK-NEXT: [2]   - PdCount
# CHECK-NEXT: [3]   - PdDiv
# CHECK-NEXT: [4]   - PdEX0
# CHECK-NEXT: [5]   - PdEX1
# CHECK-NEXT: [6]   - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9]   - PdFPMMA
# CHECK-NEXT: [10]  - PdFPSTO
# CHECK-NEXT: [11]  - PdFPU0
# CHECK-NEXT: [12]  - PdFPU1
# CHECK-NEXT: [13]  - PdFPU2
# CHECK-NEXT: [14]  - PdFPU3
# CHECK-NEXT: [15]  - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17]  - PdMul
# CHECK-NEXT: [18]  - PdStore

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]
# CHECK-NEXT: 3.00   3.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00   2.00    -     2.00

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]   Instructions:
# CHECK-NEXT:  -     1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movq	%rsp, (%rax)
# CHECK-NEXT: 2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -     movq	(%rcx), %rbp
# CHECK-NEXT:  -     2.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     2.00    -      -      -     movq	(%rdx), %rsi
# CHECK-NEXT: 1.00    -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -      -     1.00   movq	%rdi, (%rbx)

# CHECK:      Timeline view:
# CHECK-NEXT: Index     012345678

# CHECK:      [0,0]     DeER .  .   movq	%rsp, (%rax)
# CHECK-NEXT: [0,1]     DeeeeeER.   movq	(%rcx), %rbp
# CHECK-NEXT: [0,2]     D=eeeeeER   movq	(%rdx), %rsi
# CHECK-NEXT: [0,3]     D==eE---R   movq	%rdi, (%rbx)

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     1     1.0    1.0    0.0       movq	%rsp, (%rax)
# CHECK-NEXT: 1.     1     1.0    1.0    0.0       movq	(%rcx), %rbp
# CHECK-NEXT: 2.     1     2.0    2.0    0.0       movq	(%rdx), %rsi
# CHECK-NEXT: 3.     1     3.0    1.0    3.0       movq	%rdi, (%rbx)
# CHECK-NEXT:        1     1.8    1.3    0.8       <total>

# CHECK:      [4] Code Region

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      400
# CHECK-NEXT: Total Cycles:      553
# CHECK-NEXT: Total uOps:        400

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    0.72
# CHECK-NEXT: IPC:               0.72
# CHECK-NEXT: Block RThroughput: 4.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      2     1.50           *      U     movd	%mm0, (%rax)
# CHECK-NEXT:  1      5     1.50    *                   movd	(%rcx), %mm1
# CHECK-NEXT:  1      5     1.50    *                   movd	(%rdx), %mm2
# CHECK-NEXT:  1      2     1.50           *      U     movd	%mm3, (%rbx)

# CHECK:      Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT     - Register unavailable:                      0
# CHECK-NEXT: RCU     - Retire tokens unavailable:                 0
# CHECK-NEXT: SCHEDQ  - Scheduler full:                            57  (10.3%)
# CHECK-NEXT: LQ      - Load queue full:                           0
# CHECK-NEXT: SQ      - Store queue full:                          432  (78.1%)
# CHECK-NEXT: GROUP   - Static restrictions on the dispatch group: 0

# CHECK:      Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT:  0,              364  (65.8%)
# CHECK-NEXT:  1,              88  (15.9%)
# CHECK-NEXT:  2,              4  (0.7%)
# CHECK-NEXT:  3,              84  (15.2%)
# CHECK-NEXT:  4,              13  (2.4%)

# CHECK:      Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT:  0,          253  (45.8%)
# CHECK-NEXT:  1,          200  (36.2%)
# CHECK-NEXT:  2,          100  (18.1%)

# CHECK:      Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.

# CHECK:       [1]            [2]        [3]        [4]
# CHECK-NEXT: PdEX             23         40         40
# CHECK-NEXT: PdFPU            23         40         64
# CHECK-NEXT: PdLoad           3          22         40
# CHECK-NEXT: PdStore          22         24         24

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1]   - PdBranch
# CHECK-NEXT: [2]   - PdCount
# CHECK-NEXT: [3]   - PdDiv
# CHECK-NEXT: [4]   - PdEX0
# CHECK-NEXT: [5]   - PdEX1
# CHECK-NEXT: [6]   - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9]   - PdFPMMA
# CHECK-NEXT: [10]  - PdFPSTO
# CHECK-NEXT: [11]  - PdFPU0
# CHECK-NEXT: [12]  - PdFPU1
# CHECK-NEXT: [13]  - PdFPU2
# CHECK-NEXT: [14]  - PdFPU3
# CHECK-NEXT: [15]  - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17]  - PdMul
# CHECK-NEXT: [18]  - PdStore

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]
# CHECK-NEXT: 4.00   4.00    -      -      -      -      -      -      -      -     3.00   3.00    -     2.00   1.00   1.00   3.00   3.00    -     3.00   3.00    -     2.00

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]   Instructions:
# CHECK-NEXT:  -     1.00    -      -      -      -      -      -      -      -      -      -      -     1.00    -      -      -     3.00    -      -      -      -     1.00   movd	%mm0, (%rax)
# CHECK-NEXT: 1.50   1.50    -      -      -      -      -      -      -      -      -     3.00    -      -      -     1.00    -      -      -      -     3.00    -      -     movd	(%rcx), %mm1
# CHECK-NEXT: 1.50   1.50    -      -      -      -      -      -      -      -     3.00    -      -      -     1.00    -      -      -      -     3.00    -      -      -     movd	(%rdx), %mm2
# CHECK-NEXT: 1.00    -      -      -      -      -      -      -      -      -      -      -      -     1.00    -      -     3.00    -      -      -      -      -     1.00   movd	%mm3, (%rbx)

# CHECK:      Timeline view:
# CHECK-NEXT: Index     012345678

# CHECK:      [0,0]     DeeER.  .   movd	%mm0, (%rax)
# CHECK-NEXT: [0,1]     DeeeeeER.   movd	(%rcx), %mm1
# CHECK-NEXT: [0,2]     D=eeeeeER   movd	(%rdx), %mm2
# CHECK-NEXT: [0,3]     D===eeE-R   movd	%mm3, (%rbx)

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     1     1.0    1.0    0.0       movd	%mm0, (%rax)
# CHECK-NEXT: 1.     1     1.0    1.0    0.0       movd	(%rcx), %mm1
# CHECK-NEXT: 2.     1     2.0    2.0    0.0       movd	(%rdx), %mm2
# CHECK-NEXT: 3.     1     4.0    1.0    1.0       movd	%mm3, (%rbx)
# CHECK-NEXT:        1     2.0    1.3    0.3       <total>

# CHECK:      [5] Code Region

# CHECK:      Iterations:        100
# CHECK-NEXT: Instructions:      400
# CHECK-NEXT: Total Cycles:      405
# CHECK-NEXT: Total uOps:        400

# CHECK:      Dispatch Width:    4
# CHECK-NEXT: uOps Per Cycle:    0.99
# CHECK-NEXT: IPC:               0.99
# CHECK-NEXT: Block RThroughput: 4.0

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     1.50           *            movaps	%xmm0, (%rax)
# CHECK-NEXT:  1      5     1.50    *                   movaps	(%rcx), %xmm1
# CHECK-NEXT:  1      5     1.50    *                   movaps	(%rdx), %xmm2
# CHECK-NEXT:  1      1     1.50           *            movaps	%xmm3, (%rbx)

# CHECK:      Dynamic Dispatch Stall Cycles:
# CHECK-NEXT: RAT     - Register unavailable:                      0
# CHECK-NEXT: RCU     - Retire tokens unavailable:                 0
# CHECK-NEXT: SCHEDQ  - Scheduler full:                            347  (85.7%)
# CHECK-NEXT: LQ      - Load queue full:                           0
# CHECK-NEXT: SQ      - Store queue full:                          0
# CHECK-NEXT: GROUP   - Static restrictions on the dispatch group: 0

# CHECK:      Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
# CHECK-NEXT: [# dispatched], [# cycles]
# CHECK-NEXT:  0,              131  (32.3%)
# CHECK-NEXT:  1,              174  (43.0%)
# CHECK-NEXT:  2,              87  (21.5%)
# CHECK-NEXT:  4,              13  (3.2%)

# CHECK:      Schedulers - number of cycles where we saw N micro opcodes issued:
# CHECK-NEXT: [# issued], [# cycles]
# CHECK-NEXT:  0,          105  (25.9%)
# CHECK-NEXT:  1,          200  (49.4%)
# CHECK-NEXT:  2,          100  (24.7%)

# CHECK:      Scheduler's queue usage:
# CHECK-NEXT: [1] Resource name.
# CHECK-NEXT: [2] Average number of used buffer entries.
# CHECK-NEXT: [3] Maximum number of used buffer entries.
# CHECK-NEXT: [4] Total number of buffer entries.

# CHECK:       [1]            [2]        [3]        [4]
# CHECK-NEXT: PdEX             36         40         40
# CHECK-NEXT: PdFPU            36         40         64
# CHECK-NEXT: PdLoad           20         23         40
# CHECK-NEXT: PdStore          19         21         24

# CHECK:      Resources:
# CHECK-NEXT: [0.0] - PdAGLU01
# CHECK-NEXT: [0.1] - PdAGLU01
# CHECK-NEXT: [1]   - PdBranch
# CHECK-NEXT: [2]   - PdCount
# CHECK-NEXT: [3]   - PdDiv
# CHECK-NEXT: [4]   - PdEX0
# CHECK-NEXT: [5]   - PdEX1
# CHECK-NEXT: [6]   - PdFPCVT
# CHECK-NEXT: [7.0] - PdFPFMA
# CHECK-NEXT: [7.1] - PdFPFMA
# CHECK-NEXT: [8.0] - PdFPMAL
# CHECK-NEXT: [8.1] - PdFPMAL
# CHECK-NEXT: [9]   - PdFPMMA
# CHECK-NEXT: [10]  - PdFPSTO
# CHECK-NEXT: [11]  - PdFPU0
# CHECK-NEXT: [12]  - PdFPU1
# CHECK-NEXT: [13]  - PdFPU2
# CHECK-NEXT: [14]  - PdFPU3
# CHECK-NEXT: [15]  - PdFPXBR
# CHECK-NEXT: [16.0] - PdLoad
# CHECK-NEXT: [16.1] - PdLoad
# CHECK-NEXT: [17]  - PdMul
# CHECK-NEXT: [18]  - PdStore

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]
# CHECK-NEXT: 4.00   4.00    -      -      -      -      -      -     3.00   3.00    -      -      -     2.00   1.00   1.00   3.00   3.00    -     3.00   3.00    -     2.00

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0.0]  [0.1]  [1]    [2]    [3]    [4]    [5]    [6]    [7.0]  [7.1]  [8.0]  [8.1]  [9]    [10]   [11]   [12]   [13]   [14]   [15]   [16.0] [16.1] [17]   [18]   Instructions:
# CHECK-NEXT:  -     1.00    -      -      -      -      -      -      -      -      -      -      -     1.00    -      -      -     3.00    -      -      -      -     1.00   movaps	%xmm0, (%rax)
# CHECK-NEXT: 3.00    -      -      -      -      -      -      -      -     3.00    -      -      -      -      -     1.00    -      -      -      -     3.00    -      -     movaps	(%rcx), %xmm1
# CHECK-NEXT:  -     3.00    -      -      -      -      -      -     3.00    -      -      -      -      -     1.00    -      -      -      -     3.00    -      -      -     movaps	(%rdx), %xmm2
# CHECK-NEXT: 1.00    -      -      -      -      -      -      -      -      -      -      -      -     1.00    -      -     3.00    -      -      -      -      -     1.00   movaps	%xmm3, (%rbx)

# CHECK:      Timeline view:
# CHECK-NEXT: Index     012345678

# CHECK:      [0,0]     DeER .  .   movaps	%xmm0, (%rax)
# CHECK-NEXT: [0,1]     DeeeeeER.   movaps	(%rcx), %xmm1
# CHECK-NEXT: [0,2]     D=eeeeeER   movaps	(%rdx), %xmm2
# CHECK-NEXT: [0,3]     D===eE--R   movaps	%xmm3, (%rbx)

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     1     1.0    1.0    0.0       movaps	%xmm0, (%rax)
# CHECK-NEXT: 1.     1     1.0    1.0    0.0       movaps	(%rcx), %xmm1
# CHECK-NEXT: 2.     1     2.0    2.0    0.0       movaps	(%rdx), %xmm2
# CHECK-NEXT: 3.     1     4.0    2.0    2.0       movaps	%xmm3, (%rbx)
# CHECK-NEXT:        1     2.0    1.5    0.5       <total>