//! The main event loop which performs I/O on the pseudoterminal.

use std::borrow::Cow;
use std::collections::VecDeque;
use std::fs::File;
use std::io::{self, ErrorKind, Read, Write};
use std::marker::Send;
use std::sync::Arc;
use std::thread::JoinHandle;
use std::time::Instant;

use log::error;
#[cfg(not(windows))]
use mio::unix::UnixReady;
use mio::{self, Events, PollOpt, Ready};
use mio_extras::channel::{self, Receiver, Sender};

use crate::event::{self, Event, EventListener};
use crate::sync::FairMutex;
use crate::term::{SizeInfo, Term};
use crate::{ansi, thread, tty};

/// Max bytes to read from the PTY before forced terminal synchronization.
const READ_BUFFER_SIZE: usize = 0x10_0000;

/// Max bytes to read from the PTY while the terminal is locked.
const MAX_LOCKED_READ: usize = u16::max_value() as usize;

/// Messages that may be sent to the `EventLoop`.
#[derive(Debug)]
pub enum Msg {
    /// Data that should be written to the PTY.
    Input(Cow<'static, [u8]>),

    /// Indicates that the `EventLoop` should shut down, as Alacritty is shutting down.
    Shutdown,

    /// Instruction to resize the PTY.
    Resize(SizeInfo),
}

/// The main event!.. loop.
///
/// Handles all the PTY I/O and runs the PTY parser which updates terminal
/// state.
pub struct EventLoop<T: tty::EventedPty, U: EventListener> {
    poll: mio::Poll,
    pty: T,
    rx: Receiver<Msg>,
    tx: Sender<Msg>,
    terminal: Arc<FairMutex<Term<U>>>,
    event_proxy: U,
    hold: bool,
    ref_test: bool,
}

/// Helper type which tracks how much of a buffer has been written.
struct Writing {
    source: Cow<'static, [u8]>,
    written: usize,
}

pub struct Notifier(pub Sender<Msg>);

impl event::Notify for Notifier {
    fn notify<B>(&self, bytes: B)
    where
        B: Into<Cow<'static, [u8]>>,
    {
        let bytes = bytes.into();
        // terminal hangs if we send 0 bytes through.
        if bytes.len() == 0 {
            return;
        }

        let _ = self.0.send(Msg::Input(bytes));
    }
}

impl event::OnResize for Notifier {
    fn on_resize(&mut self, size: &SizeInfo) {
        let _ = self.0.send(Msg::Resize(*size));
    }
}

/// All of the mutable state needed to run the event loop.
///
/// Contains list of items to write, current write state, etc. Anything that
/// would otherwise be mutated on the `EventLoop` goes here.
#[derive(Default)]
pub struct State {
    write_list: VecDeque<Cow<'static, [u8]>>,
    writing: Option<Writing>,
    parser: ansi::Processor,
}

impl State {
    #[inline]
    fn ensure_next(&mut self) {
        if self.writing.is_none() {
            self.goto_next();
        }
    }

    #[inline]
    fn goto_next(&mut self) {
        self.writing = self.write_list.pop_front().map(Writing::new);
    }

    #[inline]
    fn take_current(&mut self) -> Option<Writing> {
        self.writing.take()
    }

    #[inline]
    fn needs_write(&self) -> bool {
        self.writing.is_some() || !self.write_list.is_empty()
    }

    #[inline]
    fn set_current(&mut self, new: Option<Writing>) {
        self.writing = new;
    }
}

impl Writing {
    #[inline]
    fn new(c: Cow<'static, [u8]>) -> Writing {
        Writing { source: c, written: 0 }
    }

    #[inline]
    fn advance(&mut self, n: usize) {
        self.written += n;
    }

    #[inline]
    fn remaining_bytes(&self) -> &[u8] {
        &self.source[self.written..]
    }

    #[inline]
    fn finished(&self) -> bool {
        self.written >= self.source.len()
    }
}

impl<T, U> EventLoop<T, U>
where
    T: tty::EventedPty + event::OnResize + Send + 'static,
    U: EventListener + Send + 'static,
{
    /// Create a new event loop.
    pub fn new(
        terminal: Arc<FairMutex<Term<U>>>,
        event_proxy: U,
        pty: T,
        hold: bool,
        ref_test: bool,
    ) -> EventLoop<T, U> {
        let (tx, rx) = channel::channel();
        EventLoop {
            poll: mio::Poll::new().expect("create mio Poll"),
            pty,
            tx,
            rx,
            terminal,
            event_proxy,
            hold,
            ref_test,
        }
    }

    pub fn channel(&self) -> Sender<Msg> {
        self.tx.clone()
    }

    /// Drain the channel.
    ///
    /// Returns `false` when a shutdown message was received.
    fn drain_recv_channel(&mut self, state: &mut State) -> bool {
        while let Ok(msg) = self.rx.try_recv() {
            match msg {
                Msg::Input(input) => state.write_list.push_back(input),
                Msg::Resize(size) => self.pty.on_resize(&size),
                Msg::Shutdown => return false,
            }
        }

        true
    }

    /// Returns a `bool` indicating whether or not the event loop should continue running.
    #[inline]
    fn channel_event(&mut self, token: mio::Token, state: &mut State) -> bool {
        if !self.drain_recv_channel(state) {
            return false;
        }

        self.poll
            .reregister(&self.rx, token, Ready::readable(), PollOpt::edge() | PollOpt::oneshot())
            .unwrap();

        true
    }

    #[inline]
    fn pty_read<X>(
        &mut self,
        state: &mut State,
        buf: &mut [u8],
        mut writer: Option<&mut X>,
    ) -> io::Result<()>
    where
        X: Write,
    {
        let mut unprocessed = 0;
        let mut processed = 0;

        // Reserve the next terminal lock for PTY reading.
        let _terminal_lease = Some(self.terminal.lease());
        let mut terminal = None;

        loop {
            // Read from the PTY.
            match self.pty.reader().read(&mut buf[unprocessed..]) {
                // This is received on Windows/macOS when no more data is readable from the PTY.
                Ok(0) if unprocessed == 0 => break,
                Ok(got) => unprocessed += got,
                Err(err) => match err.kind() {
                    ErrorKind::Interrupted | ErrorKind::WouldBlock => {
                        // Go back to mio if we're caught up on parsing and the PTY would block.
                        if unprocessed == 0 {
                            break;
                        }
                    },
                    _ => return Err(err),
                },
            }

            // Attempt to lock the terminal.
            let terminal = match &mut terminal {
                Some(terminal) => terminal,
                None => terminal.insert(match self.terminal.try_lock_unfair() {
                    // Force block if we are at the buffer size limit.
                    None if unprocessed >= READ_BUFFER_SIZE => self.terminal.lock_unfair(),
                    None => continue,
                    Some(terminal) => terminal,
                }),
            };

            // Write a copy of the bytes to the ref test file.
            if let Some(writer) = &mut writer {
                writer.write_all(&buf[..unprocessed]).unwrap();
            }

            // Parse the incoming bytes.
            for byte in &buf[..unprocessed] {
                state.parser.advance(&mut **terminal, *byte);
            }

            processed += unprocessed;
            unprocessed = 0;

            // Assure we're not blocking the terminal too long unnecessarily.
            if processed >= MAX_LOCKED_READ {
                break;
            }
        }

        // Queue terminal redraw unless all processed bytes were synchronized.
        if state.parser.sync_bytes_count() < processed && processed > 0 {
            self.event_proxy.send_event(Event::Wakeup);
        }

        Ok(())
    }

    #[inline]
    fn pty_write(&mut self, state: &mut State) -> io::Result<()> {
        state.ensure_next();

        'write_many: while let Some(mut current) = state.take_current() {
            'write_one: loop {
                match self.pty.writer().write(current.remaining_bytes()) {
                    Ok(0) => {
                        state.set_current(Some(current));
                        break 'write_many;
                    },
                    Ok(n) => {
                        current.advance(n);
                        if current.finished() {
                            state.goto_next();
                            break 'write_one;
                        }
                    },
                    Err(err) => {
                        state.set_current(Some(current));
                        match err.kind() {
                            ErrorKind::Interrupted | ErrorKind::WouldBlock => break 'write_many,
                            _ => return Err(err),
                        }
                    },
                }
            }
        }

        Ok(())
    }

    pub fn spawn(mut self) -> JoinHandle<(Self, State)> {
        thread::spawn_named("PTY reader", move || {
            let mut state = State::default();
            let mut buf = [0u8; READ_BUFFER_SIZE];

            let mut tokens = (0..).map(Into::into);

            let poll_opts = PollOpt::edge() | PollOpt::oneshot();

            let channel_token = tokens.next().unwrap();
            self.poll.register(&self.rx, channel_token, Ready::readable(), poll_opts).unwrap();

            // Register TTY through EventedRW interface.
            self.pty.register(&self.poll, &mut tokens, Ready::readable(), poll_opts).unwrap();

            let mut events = Events::with_capacity(1024);

            let mut pipe = if self.ref_test {
                Some(File::create("./alacritty.recording").expect("create alacritty recording"))
            } else {
                None
            };

            'event_loop: loop {
                // Wakeup the event loop when a synchronized update timeout was reached.
                let sync_timeout = state.parser.sync_timeout();
                let timeout = sync_timeout.map(|st| st.saturating_duration_since(Instant::now()));

                if let Err(err) = self.poll.poll(&mut events, timeout) {
                    match err.kind() {
                        ErrorKind::Interrupted => continue,
                        _ => panic!("EventLoop polling error: {:?}", err),
                    }
                }

                // Handle synchronized update timeout.
                if events.is_empty() {
                    state.parser.stop_sync(&mut *self.terminal.lock());
                    self.event_proxy.send_event(Event::Wakeup);
                    continue;
                }

                for event in events.iter() {
                    match event.token() {
                        token if token == channel_token => {
                            if !self.channel_event(channel_token, &mut state) {
                                break 'event_loop;
                            }
                        },

                        token if token == self.pty.child_event_token() => {
                            if let Some(tty::ChildEvent::Exited) = self.pty.next_child_event() {
                                if self.hold {
                                    // With hold enabled, make sure the PTY is drained.
                                    let _ = self.pty_read(&mut state, &mut buf, pipe.as_mut());
                                } else {
                                    // Without hold, shutdown the terminal.
                                    self.terminal.lock().exit();
                                }

                                self.event_proxy.send_event(Event::Wakeup);
                                break 'event_loop;
                            }
                        },

                        token
                            if token == self.pty.read_token()
                                || token == self.pty.write_token() =>
                        {
                            #[cfg(unix)]
                            if UnixReady::from(event.readiness()).is_hup() {
                                // Don't try to do I/O on a dead PTY.
                                continue;
                            }

                            if event.readiness().is_readable() {
                                if let Err(err) = self.pty_read(&mut state, &mut buf, pipe.as_mut())
                                {
                                    // On Linux, a `read` on the master side of a PTY can fail
                                    // with `EIO` if the client side hangs up.  In that case,
                                    // just loop back round for the inevitable `Exited` event.
                                    // This sucks, but checking the process is either racy or
                                    // blocking.
                                    #[cfg(target_os = "linux")]
                                    if err.raw_os_error() == Some(libc::EIO) {
                                        continue;
                                    }

                                    error!("Error reading from PTY in event loop: {}", err);
                                    break 'event_loop;
                                }
                            }

                            if event.readiness().is_writable() {
                                if let Err(err) = self.pty_write(&mut state) {
                                    error!("Error writing to PTY in event loop: {}", err);
                                    break 'event_loop;
                                }
                            }
                        },
                        _ => (),
                    }
                }

                // Register write interest if necessary.
                let mut interest = Ready::readable();
                if state.needs_write() {
                    interest.insert(Ready::writable());
                }
                // Reregister with new interest.
                self.pty.reregister(&self.poll, interest, poll_opts).unwrap();
            }

            // The evented instances are not dropped here so deregister them explicitly.
            let _ = self.poll.deregister(&self.rx);
            let _ = self.pty.deregister(&self.poll);

            (self, state)
        })
    }
}