// Copyright 2016 Joe Wilm, The Alacritty Project Contributors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//! A specialized 2d grid implementation optimized for use in a terminal.

use std::cmp::{min, max, Ordering};
use std::ops::{Deref, Range, Index, IndexMut, RangeTo, RangeFrom, RangeFull};

use index::{self, Point, Line, Column, IndexRange};
use selection::Selection;

mod row;
pub use self::row::Row;

#[cfg(test)]
mod tests;

mod storage;
use self::storage::Storage;

/// Bidirection iterator
pub trait BidirectionalIterator: Iterator {
    fn prev(&mut self) -> Option<Self::Item>;
}

/// An item in the grid along with its Line and Column.
pub struct Indexed<T> {
    pub inner: T,
    pub line: Line,
    pub column: Column,
}

impl<T> Deref for Indexed<T> {
    type Target = T;

    #[inline]
    fn deref(&self) -> &T {
        &self.inner
    }
}

impl<T: PartialEq> ::std::cmp::PartialEq for Grid<T> {
    fn eq(&self, other: &Self) -> bool {
        // Compare struct fields and check result of grid comparison
        self.raw.eq(&other.raw) &&
            self.cols.eq(&other.cols) &&
            self.lines.eq(&other.lines) &&
            self.display_offset.eq(&other.display_offset) &&
            self.scroll_limit.eq(&other.scroll_limit) &&
            self.selection.eq(&other.selection)
    }
}

/// Represents the terminal display contents
#[derive(Clone, Debug, Deserialize, Serialize)]
pub struct Grid<T> {
    /// Lines in the grid. Each row holds a list of cells corresponding to the
    /// columns in that row.
    raw: Storage<T>,

    /// Number of columns
    cols: index::Column,

    /// Number of lines.
    ///
    /// Invariant: lines is equivalent to raw.len()
    lines: index::Line,

    /// Offset of displayed area
    ///
    /// If the displayed region isn't at the bottom of the screen, it stays
    /// stationary while more text is emitted. The scrolling implementation
    /// updates this offset accordingly.
    #[serde(default)]
    display_offset: usize,

    /// An limit on how far back it's possible to scroll
    #[serde(default)]
    scroll_limit: usize,

    /// Selected region
    #[serde(skip)]
    pub selection: Option<Selection>,
}

pub struct GridIterator<'a, T: 'a> {
    /// Immutable grid reference
    grid: &'a Grid<T>,

    /// Current position of the iterator within the grid.
    pub cur: Point<usize>,
}

pub enum Scroll {
    Lines(isize),
    PageUp,
    PageDown,
    Top,
    Bottom,
}

impl<T: Copy + Clone> Grid<T> {
    pub fn new(lines: index::Line, cols: index::Column, scrollback: usize, template: T) -> Grid<T> {
        let raw = Storage::with_capacity(*lines + scrollback, lines, Row::new(cols, &template));
        Grid {
            raw,
            cols,
            lines,
            display_offset: 0,
            scroll_limit: 0,
            selection: None,
        }
    }

    pub fn visible_to_buffer(&self, point: Point) -> Point<usize> {
        Point {
            line: self.visible_line_to_buffer(point.line),
            col: point.col
        }
    }

    pub fn buffer_to_visible(&self, point: Point<usize>) -> Point {
        Point {
            line: self.buffer_line_to_visible(point.line).expect("Line not visible"),
            col: point.col
        }
    }

    pub fn buffer_line_to_visible(&self, line: usize) -> Option<Line> {
        if line >= self.display_offset {
            self.offset_to_line(line - self.display_offset)
        } else {
            None
        }
    }

    pub fn visible_line_to_buffer(&self, line: Line) -> usize {
        self.line_to_offset(line) + self.display_offset
    }

    /// Update the size of the scrollback history
    pub fn update_history(&mut self, history_size: usize, template: &T)
    {
        self.raw.update_history(history_size, Row::new(self.cols, &template));
        self.scroll_limit = min(self.scroll_limit, history_size);
    }

    pub fn scroll_display(&mut self, scroll: Scroll) {
        match scroll {
            Scroll::Lines(count) => {
                self.display_offset = min(
                    max((self.display_offset as isize) + count, 0isize) as usize,
                    self.scroll_limit
                );
            },
            Scroll::PageUp => {
                self.display_offset = min(
                    self.display_offset + self.lines.0,
                    self.scroll_limit
                );
            },
            Scroll::PageDown => {
                self.display_offset -= min(
                    self.display_offset,
                    self.lines.0
                );
            },
            Scroll::Top => self.display_offset = self.scroll_limit,
            Scroll::Bottom => self.display_offset = 0,
        }
    }

    pub fn resize(
        &mut self,
        lines: index::Line,
        cols: index::Column,
        template: &T,
    ) {
        // Check that there's actually work to do and return early if not
        if lines == self.lines && cols == self.cols {
            return;
        }

        match self.lines.cmp(&lines) {
            Ordering::Less => self.grow_lines(lines, template),
            Ordering::Greater => self.shrink_lines(lines),
            Ordering::Equal => (),
        }

        match self.cols.cmp(&cols) {
            Ordering::Less => self.grow_cols(cols, template),
            Ordering::Greater => self.shrink_cols(cols),
            Ordering::Equal => (),
        }
    }

    fn increase_scroll_limit(&mut self, count: usize) {
        self.scroll_limit = min(
            self.scroll_limit + count,
            self.raw.len().saturating_sub(*self.lines),
        );
    }

    fn decrease_scroll_limit(&mut self, count: usize) {
        self.scroll_limit = self.scroll_limit.saturating_sub(count);
    }

    /// Add lines to the visible area
    ///
    /// The behavior in Terminal.app and iTerm.app is to keep the cursor at the
    /// bottom of the screen as long as there is scrollback available. Once
    /// scrollback is exhausted, new lines are simply added to the bottom of the
    /// screen.
    ///
    /// Alacritty takes a different approach. Rather than trying to move with
    /// the scrollback, we simply pull additional lines from the back of the
    /// buffer in order to populate the new area.
    fn grow_lines(
        &mut self,
        new_line_count: index::Line,
        template: &T,
    ) {
        let lines_added = new_line_count - self.lines;

        // Need to "resize" before updating buffer
        self.raw.grow_visible_lines(new_line_count, Row::new(self.cols, template));
        self.lines = new_line_count;

        // Add new lines to bottom
        self.scroll_up(&(Line(0)..new_line_count), lines_added, template);

        self.scroll_limit = self.scroll_limit.saturating_sub(*lines_added);
    }

    fn grow_cols(&mut self, cols: index::Column, template: &T) {
        for row in self.raw.iter_mut_raw() {
            row.grow(cols, template);
        }

        // Update self cols
        self.cols = cols;
    }

    fn shrink_cols(&mut self, cols: index::Column) {
        for row in self.raw.iter_mut_raw() {
            row.shrink(cols);
        }

        self.cols = cols;
    }

    /// Remove lines from the visible area
    ///
    /// The behavior in Terminal.app and iTerm.app is to keep the cursor at the
    /// bottom of the screen. This is achieved by pushing history "out the top"
    /// of the terminal window.
    ///
    /// Alacritty takes the same approach.
    fn shrink_lines(&mut self, target: index::Line) {
        let prev = self.lines;

        self.selection = None;
        self.raw.rotate(*prev as isize - *target as isize);
        self.raw.shrink_visible_lines(target);
        self.lines = target;
    }

    /// Convert a Line index (active region) to a buffer offset
    ///
    /// # Panics
    ///
    /// This method will panic if `Line` is larger than the grid dimensions
    pub fn line_to_offset(&self, line: index::Line) -> usize {
        assert!(line < self.num_lines());

        *(self.num_lines() - line - 1)
    }

    pub fn offset_to_line(&self, offset: usize) -> Option<Line> {
        if offset < *self.num_lines() {
            Some(self.lines - offset - 1)
        } else {
            None
        }
    }

    #[inline]
    pub fn scroll_down(
        &mut self,
        region: &Range<index::Line>,
        positions: index::Line,
        template: &T,
    ) {
        // Whether or not there is a scrolling region active, as long as it
        // starts at the top, we can do a full rotation which just involves
        // changing the start index.
        //
        // To accomodate scroll regions, rows are reordered at the end.
        if region.start == Line(0) {
            // Rotate the entire line buffer. If there's a scrolling region
            // active, the bottom lines are restored in the next step.
            self.raw.rotate_up(*positions);
            if let Some(ref mut selection) = self.selection {
                selection.rotate(-(*positions as isize));
            }

            self.decrease_scroll_limit(*positions);

            // Now, restore any scroll region lines
            let lines = self.lines;
            for i in IndexRange(region.end .. lines) {
                self.raw.swap_lines(i, i + positions);
            }

            // Finally, reset recycled lines
            for i in IndexRange(Line(0)..positions) {
                self.raw[i].reset(&template);
            }
        } else {
            // Subregion rotation
            for line in IndexRange((region.start + positions)..region.end).rev() {
                self.raw.swap_lines(line, line - positions);
            }

            for line in IndexRange(region.start .. (region.start + positions)) {
                self.raw[line].reset(&template);
            }
        }
    }

    /// scroll_up moves lines at the bottom towards the top
    ///
    /// This is the performance-sensitive part of scrolling.
    pub fn scroll_up(
        &mut self,
        region: &Range<index::Line>,
        positions: index::Line,
        template: &T
    ) {
        if region.start == Line(0) {
            // Update display offset when not pinned to active area
            if self.display_offset != 0 {
                self.display_offset = min(
                    self.display_offset + *positions,
                    self.len() - self.num_lines().0,
                );
            }

            self.increase_scroll_limit(*positions);

            // Rotate the entire line buffer. If there's a scrolling region
            // active, the bottom lines are restored in the next step.
            self.raw.rotate(-(*positions as isize));
            if let Some(ref mut selection) = self.selection {
                selection.rotate(*positions as isize);
            }

            // // This next loop swaps "fixed" lines outside of a scroll region
            // // back into place after the rotation. The work is done in buffer-
            // // space rather than terminal-space to avoid redundant
            // // transformations.
            let fixed_lines = *self.num_lines() - *region.end;

            for i in 0..fixed_lines {
                self.raw.swap(i, i + *positions);
            }

            // Finally, reset recycled lines
            //
            // Recycled lines are just above the end of the scrolling region.
            for i in 0..*positions {
                self.raw[i + fixed_lines].reset(&template);
            }
        } else {
            // Subregion rotation
            for line in IndexRange(region.start..(region.end - positions)) {
                self.raw.swap_lines(line, line + positions);
            }

            // Clear reused lines
            for line in IndexRange((region.end - positions) .. region.end) {
                self.raw[line].reset(&template);
            }
        }
    }
}

impl<T> Grid<T> {
    #[inline]
    pub fn num_lines(&self) -> index::Line {
        self.lines
    }

    pub fn display_iter(&self) -> DisplayIter<T> {
        DisplayIter::new(self)
    }

    #[inline]
    pub fn num_cols(&self) -> index::Column {
        self.cols
    }

    pub fn reset(&mut self) {
        self.scroll_limit = 0;
    }

    /// Total number of lines in the buffer, this includes scrollback + visible lines
    #[inline]
    pub fn len(&self) -> usize {
        self.raw.len()
    }

    /// This is used only for truncating before saving ref-tests
    pub fn truncate(&mut self) {
        self.raw.truncate();
    }

    pub fn iter_from(&self, point: Point<usize>) -> GridIterator<T> {
        GridIterator {
            grid: self,
            cur: point,
        }
    }

    #[inline]
    pub fn contains(&self, point: &Point) -> bool {
        self.lines > point.line && self.cols > point.col
    }

    // /// Swap two lines in the grid
    // ///
    // /// This could have used slice::swap internally, but we are able to have
    // /// better error messages by doing the bounds checking ourselves.
    // #[inline]
    // pub fn swap_lines(&mut self, src: index::Line, dst: index::Line) {
    //     self.raw.swap(*src, *dst);
    // }
}

impl<'a, T> Iterator for GridIterator<'a, T> {
    type Item = &'a T;

    fn next(&mut self) -> Option<Self::Item> {
        let last_col = self.grid.num_cols() - Column(1);
        match self.cur {
            Point { line, col } if line == 0 && col == last_col => None,
            Point { col, .. } if
                (col == last_col) => {
                self.cur.line -= 1;
                self.cur.col = Column(0);
                Some(&self.grid[self.cur.line][self.cur.col])
            },
            _ => {
                self.cur.col += Column(1);
                Some(&self.grid[self.cur.line][self.cur.col])
            }
        }
    }
}

impl<'a, T> BidirectionalIterator for GridIterator<'a, T> {
    fn prev(&mut self) -> Option<Self::Item> {
        let num_cols = self.grid.num_cols();

        match self.cur {
            Point { line, col: Column(0) } if line == self.grid.len() - 1 => None,
            Point { col: Column(0), .. } => {
                self.cur.line += 1;
                self.cur.col = num_cols - Column(1);
                Some(&self.grid[self.cur.line][self.cur.col])
            },
            _ => {
                self.cur.col -= Column(1);
                Some(&self.grid[self.cur.line][self.cur.col])
            }
        }
    }
}

/// Index active region by line
impl<T> Index<index::Line> for Grid<T> {
    type Output = Row<T>;

    #[inline]
    fn index(&self, index: index::Line) -> &Row<T> {
        &self.raw[index]
    }
}

/// Index with buffer offset
impl<T> Index<usize> for Grid<T> {
    type Output = Row<T>;

    #[inline]
    fn index(&self, index: usize) -> &Row<T> {
        &self.raw[index]
    }
}

impl<T> IndexMut<index::Line> for Grid<T> {
    #[inline]
    fn index_mut(&mut self, index: index::Line) -> &mut Row<T> {
        &mut self.raw[index]
    }
}

impl<'point, T> Index<&'point Point> for Grid<T> {
    type Output = T;

    #[inline]
    fn index<'a>(&'a self, point: &Point) -> &'a T {
        &self[point.line][point.col]
    }
}

impl<'point, T> IndexMut<&'point Point> for Grid<T> {
    #[inline]
    fn index_mut<'a, 'b>(&'a mut self, point: &'b Point) -> &'a mut T {
        &mut self[point.line][point.col]
    }
}

// -------------------------------------------------------------------------------------------------
// REGIONS
// -------------------------------------------------------------------------------------------------

/// A subset of lines in the grid
///
/// May be constructed using Grid::region(..)
pub struct Region<'a, T: 'a> {
    start: Line,
    end: Line,
    raw: &'a Storage<T>,
}

/// A mutable subset of lines in the grid
///
/// May be constructed using Grid::region_mut(..)
pub struct RegionMut<'a, T: 'a> {
    start: Line,
    end: Line,
    raw: &'a mut Storage<T>,
}

impl<'a, T> RegionMut<'a, T> {
    /// Call the provided function for every item in this region
    pub fn each<F: Fn(&mut T)>(self, func: F) {
        for row in self {
            for item in row {
                func(item)
            }
        }
    }
}

pub trait IndexRegion<I, T> {
    /// Get an immutable region of Self
    fn region<'a>(&'a self, _: I) -> Region<'a, T>;

    /// Get a mutable region of Self
    fn region_mut<'a>(&'a mut self, _: I) -> RegionMut<'a, T>;
}

impl<T> IndexRegion<Range<Line>, T> for Grid<T> {
    fn region(&self, index: Range<Line>) -> Region<T> {
        assert!(index.start < self.num_lines());
        assert!(index.end <= self.num_lines());
        assert!(index.start <= index.end);
        Region {
            start: index.start,
            end: index.end,
            raw: &self.raw
        }
    }
    fn region_mut(&mut self, index: Range<Line>) -> RegionMut<T> {
        assert!(index.start < self.num_lines());
        assert!(index.end <= self.num_lines());
        assert!(index.start <= index.end);
        RegionMut {
            start: index.start,
            end: index.end,
            raw: &mut self.raw
        }
    }
}

impl<T> IndexRegion<RangeTo<Line>, T> for Grid<T> {
    fn region(&self, index: RangeTo<Line>) -> Region<T> {
        assert!(index.end <= self.num_lines());
        Region {
            start: Line(0),
            end: index.end,
            raw: &self.raw
        }
    }
    fn region_mut(&mut self, index: RangeTo<Line>) -> RegionMut<T> {
        assert!(index.end <= self.num_lines());
        RegionMut {
            start: Line(0),
            end: index.end,
            raw: &mut self.raw
        }
    }
}

impl<T> IndexRegion<RangeFrom<Line>, T> for Grid<T> {
    fn region(&self, index: RangeFrom<Line>) -> Region<T> {
        assert!(index.start < self.num_lines());
        Region {
            start: index.start,
            end: self.num_lines(),
            raw: &self.raw
        }
    }
    fn region_mut(&mut self, index: RangeFrom<Line>) -> RegionMut<T> {
        assert!(index.start < self.num_lines());
        RegionMut {
            start: index.start,
            end: self.num_lines(),
            raw: &mut self.raw
        }
    }
}

impl<T> IndexRegion<RangeFull, T> for Grid<T> {
    fn region(&self, _: RangeFull) -> Region<T> {
        Region {
            start: Line(0),
            end: self.num_lines(),
            raw: &self.raw
        }
    }

    fn region_mut(&mut self, _: RangeFull) -> RegionMut<T> {
        RegionMut {
            start: Line(0),
            end: self.num_lines(),
            raw: &mut self.raw
        }
    }
}

pub struct RegionIter<'a, T: 'a> {
    end: Line,
    cur: Line,
    raw: &'a Storage<T>,
}

pub struct RegionIterMut<'a, T: 'a> {
    end: Line,
    cur: Line,
    raw: &'a mut Storage<T>,
}

impl<'a, T> IntoIterator for Region<'a, T> {
    type Item = &'a Row<T>;
    type IntoIter = RegionIter<'a, T>;

    fn into_iter(self) -> Self::IntoIter {
        RegionIter {
            end: self.end,
            cur: self.start,
            raw: self.raw
        }
    }
}

impl<'a, T> IntoIterator for RegionMut<'a, T> {
    type Item = &'a mut Row<T>;
    type IntoIter = RegionIterMut<'a, T>;

    fn into_iter(self) -> Self::IntoIter {
        RegionIterMut {
            end: self.end,
            cur: self.start,
            raw: self.raw
        }
    }
}

impl<'a, T> Iterator for RegionIter<'a, T> {
    type Item = &'a Row<T>;
    fn next(&mut self) -> Option<Self::Item> {
        if self.cur < self.end {
            let index = self.cur;
            self.cur += 1;
            Some(&self.raw[index])
        } else {
            None
        }
    }
}

impl<'a, T> Iterator for RegionIterMut<'a, T> {
    type Item = &'a mut Row<T>;
    fn next(&mut self) -> Option<Self::Item> {
        if self.cur < self.end {
            let index = self.cur;
            self.cur += 1;
            unsafe {
                Some(&mut *(&mut self.raw[index] as *mut _))
            }
        } else {
            None
        }
    }
}

// -------------------------------------------------------------------------------------------------
// DISPLAY ITERATOR
// -------------------------------------------------------------------------------------------------

/// Iterates over the visible area accounting for buffer transform
pub struct DisplayIter<'a, T: 'a> {
    grid: &'a Grid<T>,
    offset: usize,
    limit: usize,
    col: Column,
    line: Line,
}

impl<'a, T: 'a> DisplayIter<'a, T> {
    pub fn new(grid: &'a Grid<T>) -> DisplayIter<'a, T> {
        let offset = grid.display_offset + *grid.num_lines() - 1;
        let limit =  grid.display_offset;
        let col = Column(0);
        let line = Line(0);

        DisplayIter { grid, offset, col, limit, line }
    }

    pub fn offset(&self) -> usize {
        self.offset
    }

    pub fn column(&self) -> Column {
        self.col
    }

    pub fn line(&self) -> Line {
        self.line
    }
}

impl<'a, T: Copy + 'a> Iterator for DisplayIter<'a, T> {
    type Item = Indexed<T>;

    #[inline]
    fn next(&mut self) -> Option<Self::Item> {
        // Return None if we've reached the end.
        if self.offset == self.limit && self.grid.num_cols() == self.col {
            return None;
        }

        // Get the next item.
        let item = Some(Indexed {
            inner: self.grid.raw[self.offset][self.col],
            line: self.line,
            column: self.col
        });

        // Update line/col to point to next item
        self.col += 1;
        if self.col == self.grid.num_cols() {
            if self.offset != self.limit {
                self.offset -= 1;

                self.col = Column(0);
                self.line = Line(*self.grid.lines - 1 - (self.offset - self.limit));
            }
        }

        item
    }
}