diff --git a/ChangeLog b/ChangeLog
index 2e15686..384df3c 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,64 @@
 mbed TLS ChangeLog (Sorted per branch, date)
 
+= mbed TLS 2.7.17 branch released 2020-09-01
+
+Features
+   * Support building on e2k (Elbrus) architecture: correctly enable
+     -Wformat-signedness, and fix the code that causes signed-one-bit-field
+     and sign-compare warnings. Contributed by makise-homura (Igor Molchanov)
+     <akemi_homura@kurisa.ch>.
+
+Security
+   * When checking X.509 CRLs, a certificate was only considered as revoked if
+     its revocationDate was in the past according to the local clock if
+     available. In particular, on builds without MBEDTLS_HAVE_TIME_DATE,
+     certificates were never considered as revoked. On builds with
+     MBEDTLS_HAVE_TIME_DATE, an attacker able to control the local clock (for
+     example, an untrusted OS attacking a secure enclave) could prevent
+     revocation of certificates via CRLs. Fixed by no longer checking the
+     revocationDate field, in accordance with RFC 5280. Reported by
+     yuemonangong in #3340. Reported independently and fixed by
+     Raoul Strackx and Jethro Beekman in #3433.
+   * In (D)TLS record decryption, when using a CBC ciphersuites without the
+     Encrypt-then-Mac extension, use constant code flow memory access patterns
+     to extract and check the MAC. This is an improvement to the existing
+     countermeasure against Lucky 13 attacks. The previous countermeasure was
+     effective against network-based attackers, but less so against local
+     attackers. The new countermeasure defends against local attackers, even
+     if they have access to fine-grained measurements. In particular, this
+     fixes a local Lucky 13 cache attack found and reported by Tuba Yavuz,
+     Farhaan Fowze, Ken (Yihan) Bai, Grant Hernandez, and Kevin Butler
+     (University of Florida) and Dave Tian (Purdue University).
+   * Fix side channel in RSA private key operations and static (finite-field)
+     Diffie-Hellman. An adversary with precise enough timing and memory access
+     information (typically an untrusted operating system attacking a secure
+     enclave) could bypass an existing counter-measure (base blinding) and
+     potentially fully recover the private key.
+   * Fix a 1-byte buffer overread in mbedtls_x509_crl_parse_der().
+     Credit to OSS-Fuzz for detecting the problem and to Philippe Antoine
+     for pinpointing the problematic code.
+   * Zeroising of plaintext buffers in mbedtls_ssl_read() to erase unused
+     application data from memory. Reported in #689 by
+     Johan Uppman Bruce of Sectra.
+
+Bugfix
+   * Use arc4random_buf on NetBSD instead of rand implementation with cyclical
+     lower bits. Fix contributed in #3540.
+   * Fix building library/net_sockets.c on NetBSD. NetBSD conditionals were
+     added for the backport to avoid the risk of breaking a platform. Original
+     fix contributed by Nia Alarie in #3422. Adopted for long-term support
+     branch 2.7 in #3570.
+   * Fix bug in redirection of unit test outputs on platforms where stdout is
+     defined as a macro. First reported in #2311 and fix contributed in #3528.
+     Adopted for LTS branch 2.7 in #3600.
+
+Changes
+   * Update copyright notices to use Linux Foundation guidance. As a result,
+     the copyright of contributors other than Arm is now acknowledged, and the
+     years of publishing are no longer tracked in the source files. This also
+     eliminates the need for the lines declaring the files to be part of
+     MbedTLS. Fixes #3457.
+
 = mbed TLS 2.7.16 branch released 2020-07-01
 
 Security
diff --git a/ChangeLog.d/copyright.txt b/ChangeLog.d/copyright.txt
deleted file mode 100644
index aefc6bc..0000000
--- a/ChangeLog.d/copyright.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-Changes
-   * Update copyright notices to use Linux Foundation guidance. As a result,
-     the copyright of contributors other than Arm is now acknowledged, and the
-     years of publishing are no longer tracked in the source files. This also
-     eliminates the need for the lines declaring the files to be part of
-     MbedTLS. Fixes #3457.
diff --git a/ChangeLog.d/crl-revocationDate.txt b/ChangeLog.d/crl-revocationDate.txt
deleted file mode 100644
index a8ad532..0000000
--- a/ChangeLog.d/crl-revocationDate.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Security
-   * When checking X.509 CRLs, a certificate was only considered as revoked if
-     its revocationDate was in the past according to the local clock if
-     available. In particular, on builds without MBEDTLS_HAVE_TIME_DATE,
-     certificates were never considered as revoked. On builds with
-     MBEDTLS_HAVE_TIME_DATE, an attacker able to control the local clock (for
-     example, an untrusted OS attacking a secure enclave) could prevent
-     revocation of certificates via CRLs. Fixed by no longer checking the
-     revocationDate field, in accordance with RFC 5280. Reported by
-     yuemonangong in #3340. Reported independently and fixed by
-     Raoul Strackx and Jethro Beekman in #3433.
diff --git a/ChangeLog.d/e2k-support.txt b/ChangeLog.d/e2k-support.txt
deleted file mode 100644
index 023b188..0000000
--- a/ChangeLog.d/e2k-support.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-Features
-   * Support building on e2k (Elbrus) architecture: correctly enable
-     -Wformat-signedness, and fix the code that causes signed-one-bit-field
-     and sign-compare warnings. Contributed by makise-homura (Igor Molchanov)
-     <akemi_homura@kurisa.ch>.
diff --git a/ChangeLog.d/fix-build-netbsd.txt b/ChangeLog.d/fix-build-netbsd.txt
deleted file mode 100644
index ac76834..0000000
--- a/ChangeLog.d/fix-build-netbsd.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-Bugfix
-   * Fix building library/net_sockets.c on NetBSD. NetBSD conditionals were
-     added for the backport to avoid the risk of breaking a platform. Original
-     fix contributed by Nia Alarie in #3422. Adopted for long-term support
-     branch 2.7 in #3570.
diff --git a/ChangeLog.d/netbsd-rand-arc4random_buf.txt b/ChangeLog.d/netbsd-rand-arc4random_buf.txt
deleted file mode 100644
index 8539d1f..0000000
--- a/ChangeLog.d/netbsd-rand-arc4random_buf.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-Bugfix
-   * Use arc4random_buf on NetBSD instead of rand implementation with cyclical
-     lower bits. Fix contributed in #3540.
diff --git a/ChangeLog.d/stdout-macro.txt b/ChangeLog.d/stdout-macro.txt
deleted file mode 100644
index 1c0f985..0000000
--- a/ChangeLog.d/stdout-macro.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Bugfix
-   * Fix bug in redirection of unit test outputs on platforms where stdout is
-     defined as a macro. First reported in #2311 and fix contributed in #3528.
-     Adopted for LTS branch 2.7 in #3600.
diff --git a/doxygen/input/doc_mainpage.h b/doxygen/input/doc_mainpage.h
index fe63391..7f7185a 100644
--- a/doxygen/input/doc_mainpage.h
+++ b/doxygen/input/doc_mainpage.h
@@ -49,7 +49,7 @@
  */
 
 /**
- * @mainpage mbed TLS v2.7.16 source code documentation
+ * @mainpage mbed TLS v2.7.17 source code documentation
  *
  * This documentation describes the internal structure of mbed TLS.  It was
  * automatically generated from specially formatted comment blocks in
diff --git a/doxygen/mbedtls.doxyfile b/doxygen/mbedtls.doxyfile
index 58006c9..0d97b4d 100644
--- a/doxygen/mbedtls.doxyfile
+++ b/doxygen/mbedtls.doxyfile
@@ -28,7 +28,7 @@
 # identify the project. Note that if you do not use Doxywizard you need
 # to put quotes around the project name if it contains spaces.
 
-PROJECT_NAME           = "mbed TLS v2.7.16"
+PROJECT_NAME           = "mbed TLS v2.7.17"
 
 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
 # This could be handy for archiving the generated documentation or
diff --git a/include/mbedtls/check_config.h b/include/mbedtls/check_config.h
index c671133..654c6ba 100644
--- a/include/mbedtls/check_config.h
+++ b/include/mbedtls/check_config.h
@@ -180,6 +180,16 @@
 #error "MBEDTLS_ENTROPY_FORCE_SHA256 defined, but not all prerequisites"
 #endif
 
+#if defined(__has_feature)
+#if __has_feature(memory_sanitizer)
+#define MBEDTLS_HAS_MEMSAN
+#endif
+#endif
+#if defined(MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN) &&  !defined(MBEDTLS_HAS_MEMSAN)
+#error "MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN requires building with MemorySanitizer"
+#endif
+#undef MBEDTLS_HAS_MEMSAN
+
 #if defined(MBEDTLS_TEST_NULL_ENTROPY) && \
     ( !defined(MBEDTLS_ENTROPY_C) || !defined(MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES) )
 #error "MBEDTLS_TEST_NULL_ENTROPY defined, but not all prerequisites"
diff --git a/include/mbedtls/config.h b/include/mbedtls/config.h
index bee23c0..d8332da 100644
--- a/include/mbedtls/config.h
+++ b/include/mbedtls/config.h
@@ -443,6 +443,42 @@
 //#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT
 
 /**
+ * \def MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+ *
+ * Enable testing of the constant-flow nature of some sensitive functions with
+ * clang's MemorySanitizer. This causes some existing tests to also test
+ * this non-functional property of the code under test.
+ *
+ * This setting requires compiling with clang -fsanitize=memory. The test
+ * suites can then be run normally.
+ *
+ * \warning This macro is only used for extended testing; it is not considered
+ * part of the library's API, so it may change or disappear at any time.
+ *
+ * Uncomment to enable testing of the constant-flow nature of selected code.
+ */
+//#define MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+
+/**
+ * \def MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+ *
+ * Enable testing of the constant-flow nature of some sensitive functions with
+ * valgrind's memcheck tool. This causes some existing tests to also test
+ * this non-functional property of the code under test.
+ *
+ * This setting requires valgrind headers for building, and is only useful for
+ * testing if the tests suites are run with valgrind's memcheck. This can be
+ * done for an individual test suite with 'valgrind ./test_suite_xxx', or when
+ * using CMake, this can be done for all test suites with 'make memcheck'.
+ *
+ * \warning This macro is only used for extended testing; it is not considered
+ * part of the library's API, so it may change or disappear at any time.
+ *
+ * Uncomment to enable testing of the constant-flow nature of selected code.
+ */
+//#define MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+
+/**
  * \def MBEDTLS_TEST_NULL_ENTROPY
  *
  * Enables testing and use of mbed TLS without any configured entropy sources.
diff --git a/include/mbedtls/ssl_internal.h b/include/mbedtls/ssl_internal.h
index 6dbec1b..6a04c8d 100644
--- a/include/mbedtls/ssl_internal.h
+++ b/include/mbedtls/ssl_internal.h
@@ -142,6 +142,23 @@
 #define MBEDTLS_SSL_RETRANS_WAITING         2
 #define MBEDTLS_SSL_RETRANS_FINISHED        3
 
+/* This macro determines whether CBC is supported. */
+#if defined(MBEDTLS_CIPHER_MODE_CBC) &&                               \
+    ( defined(MBEDTLS_AES_C)      ||                                  \
+      defined(MBEDTLS_CAMELLIA_C) ||                                  \
+      defined(MBEDTLS_DES_C) )
+#define MBEDTLS_SSL_SOME_SUITES_USE_CBC
+#endif
+
+/* This macro determines whether the CBC construct used in TLS 1.0-1.2 (as
+ * opposed to the very different CBC construct used in SSLv3) is supported. */
+#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC) && \
+    ( defined(MBEDTLS_SSL_PROTO_TLS1) ||        \
+      defined(MBEDTLS_SSL_PROTO_TLS1_1) ||      \
+      defined(MBEDTLS_SSL_PROTO_TLS1_2) )
+#define MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC
+#endif
+
 /*
  * Allow extra bytes for record, authentication and encryption overhead:
  * counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256)
@@ -730,6 +747,73 @@
 #endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \
           MBEDTLS_SSL_PROTO_TLS1_2 */
 
+#if defined(MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC)
+/** \brief Compute the HMAC of variable-length data with constant flow.
+ *
+ * This function computes the HMAC of the concatenation of \p add_data and \p
+ * data, and does with a code flow and memory access pattern that does not
+ * depend on \p data_len_secret, but only on \p min_data_len and \p
+ * max_data_len. In particular, this function always reads exactly \p
+ * max_data_len bytes from \p data.
+ *
+ * \param ctx               The HMAC context. It must have keys configured
+ *                          with mbedtls_md_hmac_starts() and use one of the
+ *                          following hashes: SHA-384, SHA-256, SHA-1 or MD-5.
+ *                          It is reset using mbedtls_md_hmac_reset() after
+ *                          the computation is complete to prepare for the
+ *                          next computation.
+ * \param add_data          The additional data prepended to \p data. This
+ *                          must point to a readable buffer of \p add_data_len
+ *                          bytes.
+ * \param add_data_len      The length of \p add_data in bytes.
+ * \param data              The data appended to \p add_data. This must point
+ *                          to a readable buffer of \p max_data_len bytes.
+ * \param data_len_secret   The length of the data to process in \p data.
+ *                          This must be no less than \p min_data_len and no
+ *                          greater than \p max_data_len.
+ * \param min_data_len      The minimal length of \p data in bytes.
+ * \param max_data_len      The maximal length of \p data in bytes.
+ * \param output            The HMAC will be written here. This must point to
+ *                          a writable buffer of sufficient size to hold the
+ *                          HMAC value.
+ *
+ * \retval 0
+ *         Success.
+ * \retval non-zero
+ *         Failure.
+ */
+int mbedtls_ssl_cf_hmac(
+        mbedtls_md_context_t *ctx,
+        const unsigned char *add_data, size_t add_data_len,
+        const unsigned char *data, size_t data_len_secret,
+        size_t min_data_len, size_t max_data_len,
+        unsigned char *output );
+
+/** \brief Copy data from a secret position with constant flow.
+ *
+ * This function copies \p len bytes from \p src_base + \p offset_secret to \p
+ * dst, with a code flow and memory access pattern that does not depend on \p
+ * offset_secret, but only on \p offset_min, \p offset_max and \p len.
+ *
+ * \param dst           The destination buffer. This must point to a writable
+ *                      buffer of at least \p len bytes.
+ * \param src_base      The base of the source buffer. This must point to a
+ *                      readable buffer of at least \p offset_max + \p len
+ *                      bytes.
+ * \param offset_secret The offset in the source buffer from which to copy.
+ *                      This must be no less than \p offset_min and no greater
+ *                      than \p offset_max.
+ * \param offset_min    The minimal value of \p offset_secret.
+ * \param offset_max    The maximal value of \p offset_secret.
+ * \param len           The number of bytes to copy.
+ */
+void mbedtls_ssl_cf_memcpy_offset( unsigned char *dst,
+                                   const unsigned char *src_base,
+                                   size_t offset_secret,
+                                   size_t offset_min, size_t offset_max,
+                                   size_t len );
+#endif /* MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/include/mbedtls/version.h b/include/mbedtls/version.h
index 7269e4e..547cd4c 100644
--- a/include/mbedtls/version.h
+++ b/include/mbedtls/version.h
@@ -65,16 +65,16 @@
  */
 #define MBEDTLS_VERSION_MAJOR  2
 #define MBEDTLS_VERSION_MINOR  7
-#define MBEDTLS_VERSION_PATCH  16
+#define MBEDTLS_VERSION_PATCH  17
 
 /**
  * The single version number has the following structure:
  *    MMNNPP00
  *    Major version | Minor version | Patch version
  */
-#define MBEDTLS_VERSION_NUMBER         0x02071000
-#define MBEDTLS_VERSION_STRING         "2.7.16"
-#define MBEDTLS_VERSION_STRING_FULL    "mbed TLS 2.7.16"
+#define MBEDTLS_VERSION_NUMBER         0x02071100
+#define MBEDTLS_VERSION_STRING         "2.7.17"
+#define MBEDTLS_VERSION_STRING_FULL    "mbed TLS 2.7.17"
 
 #if defined(MBEDTLS_VERSION_C)
 
diff --git a/library/CMakeLists.txt b/library/CMakeLists.txt
index 72304eb..981a48c 100644
--- a/library/CMakeLists.txt
+++ b/library/CMakeLists.txt
@@ -147,15 +147,15 @@
 
 if(USE_SHARED_MBEDTLS_LIBRARY)
     add_library(mbedcrypto SHARED ${src_crypto})
-    set_target_properties(mbedcrypto PROPERTIES VERSION 2.7.16 SOVERSION 2)
+    set_target_properties(mbedcrypto PROPERTIES VERSION 2.7.17 SOVERSION 2)
     target_link_libraries(mbedcrypto ${libs})
 
     add_library(mbedx509 SHARED ${src_x509})
-    set_target_properties(mbedx509 PROPERTIES VERSION 2.7.16 SOVERSION 0)
+    set_target_properties(mbedx509 PROPERTIES VERSION 2.7.17 SOVERSION 0)
     target_link_libraries(mbedx509 ${libs} mbedcrypto)
 
     add_library(mbedtls SHARED ${src_tls})
-    set_target_properties(mbedtls PROPERTIES VERSION 2.7.16 SOVERSION 10)
+    set_target_properties(mbedtls PROPERTIES VERSION 2.7.17 SOVERSION 10)
     target_link_libraries(mbedtls ${libs} mbedx509)
 
     install(TARGETS mbedtls mbedx509 mbedcrypto
diff --git a/library/dhm.c b/library/dhm.c
index 79ef116..e15cc8e 100644
--- a/library/dhm.c
+++ b/library/dhm.c
@@ -334,6 +334,32 @@
 }
 
 /*
+ * Pick a random R in the range [2, M) for blinding purposes
+ */
+static int dhm_random_below( mbedtls_mpi *R, const mbedtls_mpi *M,
+                int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
+{
+    int ret, count;
+
+    count = 0;
+    do
+    {
+        MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( R, mbedtls_mpi_size( M ), f_rng, p_rng ) );
+
+        while( mbedtls_mpi_cmp_mpi( R, M ) >= 0 )
+            MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( R, 1 ) );
+
+        if( count++ > 10 )
+            return( MBEDTLS_ERR_MPI_NOT_ACCEPTABLE );
+    }
+    while( mbedtls_mpi_cmp_int( R, 1 ) <= 0 );
+
+cleanup:
+    return( ret );
+}
+
+
+/*
  * Use the blinding method and optimisation suggested in section 10 of:
  *  KOCHER, Paul C. Timing attacks on implementations of Diffie-Hellman, RSA,
  *  DSS, and other systems. In : Advances in Cryptology-CRYPTO'96. Springer
@@ -342,7 +368,10 @@
 static int dhm_update_blinding( mbedtls_dhm_context *ctx,
                     int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
 {
-    int ret, count;
+    int ret;
+    mbedtls_mpi R;
+
+    mbedtls_mpi_init( &R );
 
     /*
      * Don't use any blinding the first time a particular X is used,
@@ -377,24 +406,23 @@
      */
 
     /* Vi = random( 2, P-1 ) */
-    count = 0;
-    do
-    {
-        MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &ctx->Vi, mbedtls_mpi_size( &ctx->P ), f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( dhm_random_below( &ctx->Vi, &ctx->P, f_rng, p_rng ) );
 
-        while( mbedtls_mpi_cmp_mpi( &ctx->Vi, &ctx->P ) >= 0 )
-            MBEDTLS_MPI_CHK( mbedtls_mpi_shift_r( &ctx->Vi, 1 ) );
+    /* Vf = Vi^-X mod P
+     * First compute Vi^-1 = R * (R Vi)^-1, (avoiding leaks from inv_mod),
+     * then elevate to the Xth power. */
+    MBEDTLS_MPI_CHK( dhm_random_below( &R, &ctx->P, f_rng, p_rng ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vf, &ctx->Vi, &R ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vf, &ctx->Vf, &ctx->P ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_inv_mod( &ctx->Vf, &ctx->Vf, &ctx->P ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vf, &ctx->Vf, &R ) );
+    MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vf, &ctx->Vf, &ctx->P ) );
 
-        if( count++ > 10 )
-            return( MBEDTLS_ERR_MPI_NOT_ACCEPTABLE );
-    }
-    while( mbedtls_mpi_cmp_int( &ctx->Vi, 1 ) <= 0 );
-
-    /* Vf = Vi^-X mod P */
-    MBEDTLS_MPI_CHK( mbedtls_mpi_inv_mod( &ctx->Vf, &ctx->Vi, &ctx->P ) );
     MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &ctx->Vf, &ctx->Vf, &ctx->X, &ctx->P, &ctx->RP ) );
 
 cleanup:
+    mbedtls_mpi_free( &R );
+
     return( ret );
 }
 
diff --git a/library/rsa.c b/library/rsa.c
index 376afa4..c5dbdac 100644
--- a/library/rsa.c
+++ b/library/rsa.c
@@ -744,6 +744,9 @@
                  int (*f_rng)(void *, unsigned char *, size_t), void *p_rng )
 {
     int ret, count = 0;
+    mbedtls_mpi R;
+
+    mbedtls_mpi_init( &R );
 
     if( ctx->Vf.p != NULL )
     {
@@ -759,18 +762,41 @@
     /* Unblinding value: Vf = random number, invertible mod N */
     do {
         if( count++ > 10 )
-            return( MBEDTLS_ERR_RSA_RNG_FAILED );
+        {
+            ret = MBEDTLS_ERR_RSA_RNG_FAILED;
+            goto cleanup;
+        }
 
         MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &ctx->Vf, ctx->len - 1, f_rng, p_rng ) );
-        MBEDTLS_MPI_CHK( mbedtls_mpi_gcd( &ctx->Vi, &ctx->Vf, &ctx->N ) );
-    } while( mbedtls_mpi_cmp_int( &ctx->Vi, 1 ) != 0 );
 
-    /* Blinding value: Vi =  Vf^(-e) mod N */
-    MBEDTLS_MPI_CHK( mbedtls_mpi_inv_mod( &ctx->Vi, &ctx->Vf, &ctx->N ) );
+        /* Compute Vf^-1 as R * (R Vf)^-1 to avoid leaks from inv_mod. */
+        MBEDTLS_MPI_CHK( mbedtls_mpi_fill_random( &R, ctx->len - 1, f_rng, p_rng ) );
+        MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vi, &ctx->Vf, &R ) );
+        MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vi, &ctx->Vi, &ctx->N ) );
+
+        /* At this point, Vi is invertible mod N if and only if both Vf and R
+         * are invertible mod N. If one of them isn't, we don't need to know
+         * which one, we just loop and choose new values for both of them.
+         * (Each iteration succeeds with overwhelming probability.) */
+        ret = mbedtls_mpi_inv_mod( &ctx->Vi, &ctx->Vi, &ctx->N );
+        if( ret == MBEDTLS_ERR_MPI_NOT_ACCEPTABLE )
+            continue;
+        if( ret != 0 )
+            goto cleanup;
+
+        /* Finish the computation of Vf^-1 = R * (R Vf)^-1 */
+        MBEDTLS_MPI_CHK( mbedtls_mpi_mul_mpi( &ctx->Vi, &ctx->Vi, &R ) );
+        MBEDTLS_MPI_CHK( mbedtls_mpi_mod_mpi( &ctx->Vi, &ctx->Vi, &ctx->N ) );
+    } while( 0 );
+
+    /* Blinding value: Vi = Vf^(-e) mod N
+     * (Vi already contains Vf^-1 at this point) */
     MBEDTLS_MPI_CHK( mbedtls_mpi_exp_mod( &ctx->Vi, &ctx->Vi, &ctx->E, &ctx->N, &ctx->RN ) );
 
 
 cleanup:
+    mbedtls_mpi_free( &R );
+
     return( ret );
 }
 
diff --git a/library/ssl_tls.c b/library/ssl_tls.c
index ee7a1cf..3b06fee 100644
--- a/library/ssl_tls.c
+++ b/library/ssl_tls.c
@@ -1299,32 +1299,10 @@
 #endif /* MBEDTLS_SSL_PROTO_SSL3 */
 
 #if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_NULL_CIPHER) ||     \
-    ( defined(MBEDTLS_CIPHER_MODE_CBC) &&                                  \
-      ( defined(MBEDTLS_AES_C) || defined(MBEDTLS_CAMELLIA_C) ) )
+    defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC)
 #define SSL_SOME_MODES_USE_MAC
 #endif
 
-/* The function below is only used in the Lucky 13 counter-measure in
- * ssl_decrypt_buf(). These are the defines that guard the call site. */
-#if defined(SSL_SOME_MODES_USE_MAC) && \
-    ( defined(MBEDTLS_SSL_PROTO_TLS1) || \
-      defined(MBEDTLS_SSL_PROTO_TLS1_1) || \
-      defined(MBEDTLS_SSL_PROTO_TLS1_2) )
-/* This function makes sure every byte in the memory region is accessed
- * (in ascending addresses order) */
-static void ssl_read_memory( unsigned char *p, size_t len )
-{
-    unsigned char acc = 0;
-    volatile unsigned char force;
-
-    for( ; len != 0; p++, len-- )
-        acc ^= *p;
-
-    force = acc;
-    (void) force;
-}
-#endif /* SSL_SOME_MODES_USE_MAC && ( TLS1 || TLS1_1 || TLS1_2 ) */
-
 /*
  * Encryption/decryption functions
  */
@@ -1521,8 +1499,7 @@
     }
     else
 #endif /* MBEDTLS_GCM_C || MBEDTLS_CCM_C */
-#if defined(MBEDTLS_CIPHER_MODE_CBC) &&                                    \
-    ( defined(MBEDTLS_AES_C) || defined(MBEDTLS_CAMELLIA_C) )
+#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC)
     if( mode == MBEDTLS_MODE_CBC )
     {
         int ret;
@@ -1641,8 +1618,7 @@
 #endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */
     }
     else
-#endif /* MBEDTLS_CIPHER_MODE_CBC &&
-          ( MBEDTLS_AES_C || MBEDTLS_CAMELLIA_C ) */
+#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC */
     {
         MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
         return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
@@ -1660,6 +1636,156 @@
     return( 0 );
 }
 
+#if defined(MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC)
+/*
+ * Constant-flow conditional memcpy:
+ *  - if c1 == c2, equivalent to memcpy(dst, src, len),
+ *  - otherwise, a no-op,
+ * but with execution flow independent of the values of c1 and c2.
+ *
+ * Use only bit operations to avoid branches that could be used by some
+ * compilers on some platforms to translate comparison operators.
+ */
+static void mbedtls_ssl_cf_memcpy_if_eq( unsigned char *dst,
+                                         const unsigned char *src,
+                                         size_t len,
+                                         size_t c1, size_t c2 )
+{
+    /* diff = 0 if c1 == c2, non-zero otherwise */
+    const size_t diff = c1 ^ c2;
+
+    /* MSVC has a warning about unary minus on unsigned integer types,
+     * but this is well-defined and precisely what we want to do here. */
+#if defined(_MSC_VER)
+#pragma warning( push )
+#pragma warning( disable : 4146 )
+#endif
+
+    /* diff_msb's most significant bit is equal to c1 != c2 */
+    const size_t diff_msb = ( diff | -diff );
+
+    /* diff1 = c1 != c2 */
+    const size_t diff1 = diff_msb >> ( sizeof( diff_msb ) * 8 - 1 );
+
+    /* mask = c1 != c2 ? 0xff : 0x00 */
+    const unsigned char mask = (unsigned char) -diff1;
+
+#if defined(_MSC_VER)
+#pragma warning( pop )
+#endif
+
+    /* dst[i] = c1 != c2 ? dst[i] : src[i] */
+    size_t i;
+    for( i = 0; i < len; i++ )
+        dst[i] = ( dst[i] & mask ) | ( src[i] & ~mask );
+}
+
+/*
+ * Compute HMAC of variable-length data with constant flow.
+ *
+ * Only works with MD-5, SHA-1, SHA-256 and SHA-384.
+ * (Otherwise, computation of block_size needs to be adapted.)
+ */
+int mbedtls_ssl_cf_hmac(
+        mbedtls_md_context_t *ctx,
+        const unsigned char *add_data, size_t add_data_len,
+        const unsigned char *data, size_t data_len_secret,
+        size_t min_data_len, size_t max_data_len,
+        unsigned char *output )
+{
+    /*
+     * This function breaks the HMAC abstraction and uses the md_clone()
+     * extension to the MD API in order to get constant-flow behaviour.
+     *
+     * HMAC(msg) is defined as HASH(okey + HASH(ikey + msg)) where + means
+     * concatenation, and okey/ikey are the XOR of the key with some fixed bit
+     * patterns (see RFC 2104, sec. 2), which are stored in ctx->hmac_ctx.
+     *
+     * We'll first compute inner_hash = HASH(ikey + msg) by hashing up to
+     * minlen, then cloning the context, and for each byte up to maxlen
+     * finishing up the hash computation, keeping only the correct result.
+     *
+     * Then we only need to compute HASH(okey + inner_hash) and we're done.
+     */
+    const mbedtls_md_type_t md_alg = mbedtls_md_get_type( ctx->md_info );
+    /* TLS 1.0-1.2 only support SHA-384, SHA-256, SHA-1, MD-5,
+     * all of which have the same block size except SHA-384. */
+    const size_t block_size = md_alg == MBEDTLS_MD_SHA384 ? 128 : 64;
+    const unsigned char * const ikey = ctx->hmac_ctx;
+    const unsigned char * const okey = ikey + block_size;
+    const size_t hash_size = mbedtls_md_get_size( ctx->md_info );
+
+    unsigned char aux_out[MBEDTLS_MD_MAX_SIZE];
+    mbedtls_md_context_t aux;
+    size_t offset;
+    int ret;
+
+    mbedtls_md_init( &aux );
+
+#define MD_CHK( func_call ) \
+    do {                    \
+        ret = (func_call);  \
+        if( ret != 0 )      \
+            goto cleanup;   \
+    } while( 0 )
+
+    MD_CHK( mbedtls_md_setup( &aux, ctx->md_info, 0 ) );
+
+    /* After hmac_start() of hmac_reset(), ikey has already been hashed,
+     * so we can start directly with the message */
+    MD_CHK( mbedtls_md_update( ctx, add_data, add_data_len ) );
+    MD_CHK( mbedtls_md_update( ctx, data, min_data_len ) );
+
+    /* For each possible length, compute the hash up to that point */
+    for( offset = min_data_len; offset <= max_data_len; offset++ )
+    {
+        MD_CHK( mbedtls_md_clone( &aux, ctx ) );
+        MD_CHK( mbedtls_md_finish( &aux, aux_out ) );
+        /* Keep only the correct inner_hash in the output buffer */
+        mbedtls_ssl_cf_memcpy_if_eq( output, aux_out, hash_size,
+                                     offset, data_len_secret );
+
+        if( offset < max_data_len )
+            MD_CHK( mbedtls_md_update( ctx, data + offset, 1 ) );
+    }
+
+    /* Now compute HASH(okey + inner_hash) */
+    MD_CHK( mbedtls_md_starts( ctx ) );
+    MD_CHK( mbedtls_md_update( ctx, okey, block_size ) );
+    MD_CHK( mbedtls_md_update( ctx, output, hash_size ) );
+    MD_CHK( mbedtls_md_finish( ctx, output ) );
+
+    /* Done, get ready for next time */
+    MD_CHK( mbedtls_md_hmac_reset( ctx ) );
+
+#undef MD_CHK
+
+cleanup:
+    mbedtls_md_free( &aux );
+    return( ret );
+}
+
+/*
+ * Constant-flow memcpy from variable position in buffer.
+ * - functionally equivalent to memcpy(dst, src + offset_secret, len)
+ * - but with execution flow independent from the value of offset_secret.
+ */
+void mbedtls_ssl_cf_memcpy_offset( unsigned char *dst,
+                                   const unsigned char *src_base,
+                                   size_t offset_secret,
+                                   size_t offset_min, size_t offset_max,
+                                   size_t len )
+{
+    size_t offset;
+
+    for( offset = offset_min; offset <= offset_max; offset++ )
+    {
+        mbedtls_ssl_cf_memcpy_if_eq( dst, src_base + offset, len,
+                                     offset, offset_secret );
+    }
+}
+#endif /* MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
+
 static int ssl_decrypt_buf( mbedtls_ssl_context *ssl )
 {
     size_t i;
@@ -1785,8 +1911,7 @@
     }
     else
 #endif /* MBEDTLS_GCM_C || MBEDTLS_CCM_C */
-#if defined(MBEDTLS_CIPHER_MODE_CBC) &&                                    \
-    ( defined(MBEDTLS_AES_C) || defined(MBEDTLS_CAMELLIA_C) )
+#if defined(MBEDTLS_SSL_SOME_SUITES_USE_CBC)
     if( mode == MBEDTLS_MODE_CBC )
     {
         /*
@@ -1997,8 +2122,7 @@
         ssl->in_msglen -= padlen;
     }
     else
-#endif /* MBEDTLS_CIPHER_MODE_CBC &&
-          ( MBEDTLS_AES_C || MBEDTLS_CAMELLIA_C ) */
+#endif /* MBEDTLS_SSL_SOME_SUITES_USE_CBC) */
     {
         MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
         return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
@@ -2017,6 +2141,7 @@
     if( auth_done == 0 )
     {
         unsigned char mac_expect[MBEDTLS_SSL_MAC_ADD];
+        unsigned char mac_peer[MBEDTLS_SSL_MAC_ADD];
 
         ssl->in_msglen -= ssl->transform_in->maclen;
 
@@ -2031,6 +2156,8 @@
                       ssl->in_msg, ssl->in_msglen,
                       ssl->in_ctr, ssl->in_msgtype,
                       mac_expect );
+            memcpy( mac_peer, ssl->in_msg + ssl->in_msglen,
+                              ssl->transform_in->maclen );
         }
         else
 #endif /* MBEDTLS_SSL_PROTO_SSL3 */
@@ -2038,34 +2165,8 @@
         defined(MBEDTLS_SSL_PROTO_TLS1_2)
         if( ssl->minor_ver > MBEDTLS_SSL_MINOR_VERSION_0 )
         {
-            /*
-             * Process MAC and always update for padlen afterwards to make
-             * total time independent of padlen.
-             *
-             * Known timing attacks:
-             *  - Lucky Thirteen (http://www.isg.rhul.ac.uk/tls/TLStiming.pdf)
-             *
-             * To compensate for different timings for the MAC calculation
-             * depending on how much padding was removed (which is determined
-             * by padlen), process extra_run more blocks through the hash
-             * function.
-             *
-             * The formula in the paper is
-             *   extra_run = ceil( (L1-55) / 64 ) - ceil( (L2-55) / 64 )
-             * where L1 is the size of the header plus the decrypted message
-             * plus CBC padding and L2 is the size of the header plus the
-             * decrypted message. This is for an underlying hash function
-             * with 64-byte blocks.
-             * We use ( (Lx+8) / 64 ) to handle 'negative Lx' values
-             * correctly. We round down instead of up, so -56 is the correct
-             * value for our calculations instead of -55.
-             *
-             * Repeat the formula rather than defining a block_size variable.
-             * This avoids requiring division by a variable at runtime
-             * (which would be marginally less efficient and would require
-             * linking an extra division function in some builds).
-             */
-            size_t j, extra_run = 0;
+            int ret;
+            unsigned char add_data[13];
 
             /*
              * The next two sizes are the minimum and maximum values of
@@ -2080,66 +2181,25 @@
             const size_t max_len = ssl->in_msglen + padlen;
             const size_t min_len = ( max_len > 256 ) ? max_len - 256 : 0;
 
-            switch( ssl->transform_in->ciphersuite_info->mac )
+            memcpy( add_data +  0, ssl->in_ctr, 8 );
+            memcpy( add_data +  8, ssl->in_hdr, 3 );
+            memcpy( add_data + 11, ssl->in_len, 2 );
+
+            ret = mbedtls_ssl_cf_hmac( &ssl->transform_in->md_ctx_dec,
+                                       add_data, sizeof( add_data ),
+                                       ssl->in_msg, ssl->in_msglen,
+                                       min_len, max_len,
+                                       mac_expect );
+            if( ret != 0 )
             {
-#if defined(MBEDTLS_MD5_C) || defined(MBEDTLS_SHA1_C) || \
-    defined(MBEDTLS_SHA256_C)
-                case MBEDTLS_MD_MD5:
-                case MBEDTLS_MD_SHA1:
-                case MBEDTLS_MD_SHA256:
-                    /* 8 bytes of message size, 64-byte compression blocks */
-                    extra_run = ( 13 + ssl->in_msglen + padlen + 8 ) / 64 -
-                                ( 13 + ssl->in_msglen          + 8 ) / 64;
-                    break;
-#endif
-#if defined(MBEDTLS_SHA512_C)
-                case MBEDTLS_MD_SHA384:
-                    /* 16 bytes of message size, 128-byte compression blocks */
-                    extra_run = ( 13 + ssl->in_msglen + padlen + 16 ) / 128 -
-                                ( 13 + ssl->in_msglen          + 16 ) / 128;
-                    break;
-#endif
-                default:
-                    MBEDTLS_SSL_DEBUG_MSG( 1, ( "should never happen" ) );
-                    return( MBEDTLS_ERR_SSL_INTERNAL_ERROR );
+                MBEDTLS_SSL_DEBUG_RET( 1, "mbedtls_ssl_cf_hmac", ret );
+                return( ret );
             }
 
-            extra_run &= correct * 0xFF;
-
-            mbedtls_md_hmac_update( &ssl->transform_in->md_ctx_dec, ssl->in_ctr, 8 );
-            mbedtls_md_hmac_update( &ssl->transform_in->md_ctx_dec, ssl->in_hdr, 3 );
-            mbedtls_md_hmac_update( &ssl->transform_in->md_ctx_dec, ssl->in_len, 2 );
-            mbedtls_md_hmac_update( &ssl->transform_in->md_ctx_dec, ssl->in_msg,
-                             ssl->in_msglen );
-            /* Make sure we access everything even when padlen > 0. This
-             * makes the synchronisation requirements for just-in-time
-             * Prime+Probe attacks much tighter and hopefully impractical. */
-            ssl_read_memory( ssl->in_msg + ssl->in_msglen, padlen );
-            mbedtls_md_hmac_finish( &ssl->transform_in->md_ctx_dec, mac_expect );
-
-            /* Dummy calls to compression function.
-             * Call mbedtls_md_process at least once due to cache attacks
-             * that observe whether md_process() was called of not.
-             * Respect the usual start-(process|update)-finish sequence for
-             * the sake of hardware accelerators that might require it. */
-            mbedtls_md_starts( &ssl->transform_in->md_ctx_dec );
-            for( j = 0; j < extra_run + 1; j++ )
-                mbedtls_md_process( &ssl->transform_in->md_ctx_dec, ssl->in_msg );
-            {
-                /* The switch statement above already checks that we're using
-                 * one of MD-5, SHA-1, SHA-256 or SHA-384. */
-                unsigned char tmp[384 / 8];
-                mbedtls_md_finish( &ssl->transform_in->md_ctx_dec, tmp );
-            }
-
-            mbedtls_md_hmac_reset( &ssl->transform_in->md_ctx_dec );
-
-            /* Make sure we access all the memory that could contain the MAC,
-             * before we check it in the next code block. This makes the
-             * synchronisation requirements for just-in-time Prime+Probe
-             * attacks much tighter and hopefully impractical. */
-            ssl_read_memory( ssl->in_msg + min_len,
-                                 max_len - min_len + ssl->transform_in->maclen );
+            mbedtls_ssl_cf_memcpy_offset( mac_peer, ssl->in_msg,
+                                          ssl->in_msglen,
+                                          min_len, max_len,
+                                          ssl->transform_in->maclen );
         }
         else
 #endif /* MBEDTLS_SSL_PROTO_TLS1 || MBEDTLS_SSL_PROTO_TLS1_1 || \
@@ -2151,11 +2211,10 @@
 
 #if defined(MBEDTLS_SSL_DEBUG_ALL)
         MBEDTLS_SSL_DEBUG_BUF( 4, "expected mac", mac_expect, ssl->transform_in->maclen );
-        MBEDTLS_SSL_DEBUG_BUF( 4, "message  mac", ssl->in_msg + ssl->in_msglen,
-                               ssl->transform_in->maclen );
+        MBEDTLS_SSL_DEBUG_BUF( 4, "message  mac", mac_peer, ssl->transform_in->maclen );
 #endif
 
-        if( mbedtls_ssl_safer_memcmp( ssl->in_msg + ssl->in_msglen, mac_expect,
+        if( mbedtls_ssl_safer_memcmp( mac_peer, mac_expect,
                                       ssl->transform_in->maclen ) != 0 )
         {
 #if defined(MBEDTLS_SSL_DEBUG_ALL)
@@ -7345,6 +7404,10 @@
     memcpy( buf, ssl->in_offt, n );
     ssl->in_msglen -= n;
 
+    /* Zeroising the plaintext buffer to erase unused application data
+       from the memory. */
+    mbedtls_zeroize( ssl->in_offt, n );
+
     if( ssl->in_msglen == 0 )
     {
         /* all bytes consumed */
diff --git a/library/version_features.c b/library/version_features.c
index 6ed248f..a3e3df4 100644
--- a/library/version_features.c
+++ b/library/version_features.c
@@ -253,6 +253,12 @@
 #if defined(MBEDTLS_ECP_NORMALIZE_MXZ_ALT)
     "MBEDTLS_ECP_NORMALIZE_MXZ_ALT",
 #endif /* MBEDTLS_ECP_NORMALIZE_MXZ_ALT */
+#if defined(MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN)
+    "MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN",
+#endif /* MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN */
+#if defined(MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND)
+    "MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND",
+#endif /* MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND */
 #if defined(MBEDTLS_TEST_NULL_ENTROPY)
     "MBEDTLS_TEST_NULL_ENTROPY",
 #endif /* MBEDTLS_TEST_NULL_ENTROPY */
diff --git a/library/x509_crl.c b/library/x509_crl.c
index d890f2c..73a300d 100644
--- a/library/x509_crl.c
+++ b/library/x509_crl.c
@@ -287,13 +287,13 @@
         size_t len2;
         const unsigned char *end2;
 
+        cur_entry->raw.tag = **p;
         if( ( ret = mbedtls_asn1_get_tag( p, end, &len2,
                 MBEDTLS_ASN1_SEQUENCE | MBEDTLS_ASN1_CONSTRUCTED ) ) != 0 )
         {
             return( ret );
         }
 
-        cur_entry->raw.tag = **p;
         cur_entry->raw.p = *p;
         cur_entry->raw.len = len2;
         end2 = *p + len2;
diff --git a/scripts/config.pl b/scripts/config.pl
index 0fd5190..80b6cd8 100755
--- a/scripts/config.pl
+++ b/scripts/config.pl
@@ -124,6 +124,8 @@
 MBEDTLS_REMOVE_ARC4_CIPHERSUITES
 MBEDTLS_RSA_NO_CRT
 MBEDTLS_SSL_HW_RECORD_ACCEL
+MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
 MBEDTLS_TEST_NULL_ENTROPY
 MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
 MBEDTLS_ZLIB_SUPPORT
diff --git a/tests/scripts/all.sh b/tests/scripts/all.sh
index 203f38e..fad539a 100755
--- a/tests/scripts/all.sh
+++ b/tests/scripts/all.sh
@@ -961,6 +961,46 @@
     if_build_succeeded env OPENSSL_CMD="$OPENSSL_LEGACY" GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" tests/compat.sh -e '^$' -f 'NULL\|DES\|RC4\|ARCFOUR'
 }
 
+component_test_memsan_constant_flow () {
+    # This tests both (1) accesses to undefined memory, and (2) branches or
+    # memory access depending on secret values. To distinguish between those:
+    # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist?
+    # - or alternatively, change the build type to MemSanDbg, which enables
+    # origin tracking and nicer stack traces (which are useful for debugging
+    # anyway), and check if the origin was TEST_CF_SECRET() or something else.
+    msg "build: cmake MSan (clang), full config with constant flow testing"
+    scripts/config.pl full
+    scripts/config.pl set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN
+    scripts/config.pl unset MBEDTLS_AESNI_C # memsan doesn't grok asm
+    CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan .
+    make
+
+    msg "test: main suites (Msan + constant flow)"
+    make test
+}
+
+component_test_valgrind_constant_flow () {
+    # This tests both (1) everything that valgrind's memcheck usually checks
+    # (heap buffer overflows, use of uninitialized memory, use-after-free,
+    # etc.) and (2) branches or memory access depending on secret values,
+    # which will be reported as uninitialized memory. To distinguish between
+    # secret and actually uninitialized:
+    # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist?
+    # - or alternatively, build with debug info and manually run the offending
+    # test suite with valgrind --track-origins=yes, then check if the origin
+    # was TEST_CF_SECRET() or something else.
+    msg "build: cmake release GCC, full config with constant flow testing"
+    scripts/config.pl full
+    scripts/config.pl set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND
+    cmake -D CMAKE_BUILD_TYPE:String=Release .
+    make
+
+    # this only shows a summary of the results (how many of each type)
+    # details are left in Testing/<date>/DynamicAnalysis.xml
+    msg "test: main suites (valgrind + constant flow)"
+    make memcheck
+}
+
 component_test_default_no_deprecated () {
     # Test that removing the deprecated features from the default
     # configuration leaves something consistent.
diff --git a/tests/suites/helpers.function b/tests/suites/helpers.function
index d205786..c1c76ec 100644
--- a/tests/suites/helpers.function
+++ b/tests/suites/helpers.function
@@ -38,6 +38,52 @@
 #include <unistd.h>
 #endif
 
+/*
+ * Define the two macros
+ *
+ *  #define TEST_CF_SECRET(ptr, size)
+ *  #define TEST_CF_PUBLIC(ptr, size)
+ *
+ * that can be used in tests to mark a memory area as secret (no branch or
+ * memory access should depend on it) or public (default, only needs to be
+ * marked explicitly when it was derived from secret data).
+ *
+ * Arguments:
+ * - ptr: a pointer to the memory area to be marked
+ * - size: the size in bytes of the memory area
+ *
+ * Implementation:
+ * The basic idea is that of ctgrind <https://github.com/agl/ctgrind>: we can
+ * re-use tools that were designed for checking use of uninitialized memory.
+ * This file contains two implementations: one based on MemorySanitizer, the
+ * other on valgrind's memcheck. If none of them is enabled, dummy macros that
+ * do nothing are defined for convenience.
+ */
+#if defined(MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN)
+#include <sanitizer/msan_interface.h>
+
+/* Use macros to avoid messing up with origin tracking */
+#define TEST_CF_SECRET  __msan_allocated_memory
+// void __msan_allocated_memory(const volatile void* data, size_t size);
+#define TEST_CF_PUBLIC  __msan_unpoison
+// void __msan_unpoison(const volatile void *a, size_t size);
+
+#elif defined(MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND)
+#include <valgrind/memcheck.h>
+
+#define TEST_CF_SECRET  VALGRIND_MAKE_MEM_UNDEFINED
+// VALGRIND_MAKE_MEM_UNDEFINED(_qzz_addr, _qzz_len)
+#define TEST_CF_PUBLIC  VALGRIND_MAKE_MEM_DEFINED
+// VALGRIND_MAKE_MEM_DEFINED(_qzz_addr, _qzz_len)
+
+#else /* MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN ||
+         MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND */
+
+#define TEST_CF_SECRET(ptr, size)
+#define TEST_CF_PUBLIC(ptr, size)
+
+#endif /* MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN */
+
 /*----------------------------------------------------------------------------*/
 /* Constants */
 
diff --git a/tests/suites/test_suite_ssl.data b/tests/suites/test_suite_ssl.data
index b92c1fe..84b56c3 100644
--- a/tests/suites/test_suite_ssl.data
+++ b/tests/suites/test_suite_ssl.data
@@ -57,3 +57,31 @@
 
 SSL SET_HOSTNAME memory leak: call ssl_set_hostname twice
 ssl_set_hostname_twice:"server0":"server1"
+
+Constant-flow HMAC: MD5
+depends_on:MBEDTLS_MD5_C
+ssl_cf_hmac:MBEDTLS_MD_MD5
+
+Constant-flow HMAC: SHA1
+depends_on:MBEDTLS_SHA1_C
+ssl_cf_hmac:MBEDTLS_MD_SHA1
+
+Constant-flow HMAC: SHA256
+depends_on:MBEDTLS_SHA256_C
+ssl_cf_hmac:MBEDTLS_MD_SHA256
+
+Constant-flow HMAC: SHA384
+depends_on:MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384
+ssl_cf_hmac:MBEDTLS_MD_SHA384
+
+# these are the numbers we'd get with an empty plaintext and truncated HMAC
+Constant-flow memcpy from offset: small
+ssl_cf_memcpy_offset:0:5:10
+
+# we could get this with 255-bytes plaintext and untruncated SHA-256
+Constant-flow memcpy from offset: medium
+ssl_cf_memcpy_offset:0:255:32
+
+# we could get this with 355-bytes plaintext and untruncated SHA-384
+Constant-flow memcpy from offset: large
+ssl_cf_memcpy_offset:100:339:48
diff --git a/tests/suites/test_suite_ssl.function b/tests/suites/test_suite_ssl.function
index 1cd2ed5..0efcce7 100644
--- a/tests/suites/test_suite_ssl.function
+++ b/tests/suites/test_suite_ssl.function
@@ -54,3 +54,127 @@
 }
 /* END_CASE */
 
+/* BEGIN_CASE depends_on:MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
+void ssl_cf_hmac( int hash )
+{
+    /*
+     * Test the function mbedtls_ssl_cf_hmac() against a reference
+     * implementation.
+     */
+    mbedtls_md_context_t ctx, ref_ctx;
+    const mbedtls_md_info_t *md_info;
+    size_t out_len, block_size;
+    size_t min_in_len, in_len, max_in_len, i;
+    /* TLS additional data is 13 bytes (hence the "lucky 13" name) */
+    unsigned char add_data[13];
+    unsigned char ref_out[MBEDTLS_MD_MAX_SIZE];
+    unsigned char *data = NULL;
+    unsigned char *out = NULL;
+    unsigned char rec_num = 0;
+
+    mbedtls_md_init( &ctx );
+    mbedtls_md_init( &ref_ctx );
+
+    md_info = mbedtls_md_info_from_type( hash );
+    TEST_ASSERT( md_info != NULL );
+    out_len = mbedtls_md_get_size( md_info );
+    TEST_ASSERT( out_len != 0 );
+    block_size = hash == MBEDTLS_MD_SHA384 ? 128 : 64;
+
+    /* Use allocated out buffer to catch overwrites */
+    out = mbedtls_calloc( 1, out_len );
+    TEST_ASSERT( out != NULL );
+
+    /* Set up contexts with the given hash and a dummy key */
+    TEST_ASSERT( 0 == mbedtls_md_setup( &ctx, md_info, 1 ) );
+    TEST_ASSERT( 0 == mbedtls_md_setup( &ref_ctx, md_info, 1 ) );
+    memset( ref_out, 42, sizeof( ref_out ) );
+    TEST_ASSERT( 0 == mbedtls_md_hmac_starts( &ctx, ref_out, out_len ) );
+    TEST_ASSERT( 0 == mbedtls_md_hmac_starts( &ref_ctx, ref_out, out_len ) );
+    memset( ref_out, 0, sizeof( ref_out ) );
+
+    /*
+     * Test all possible lengths up to a point. The difference between
+     * max_in_len and min_in_len is at most 255, and make sure they both vary
+     * by at least one block size.
+     */
+    for( max_in_len = 0; max_in_len <= 255 + block_size; max_in_len++ )
+    {
+        /* Use allocated in buffer to catch overreads */
+        data = mbedtls_calloc( 1, max_in_len );
+        TEST_ASSERT( data != NULL || max_in_len == 0 );
+
+        min_in_len = max_in_len > 255 ? max_in_len - 255 : 0;
+        for( in_len = min_in_len; in_len <= max_in_len; in_len++ )
+        {
+            /* Set up dummy data and add_data */
+            rec_num++;
+            memset( add_data, rec_num, sizeof( add_data ) );
+            for( i = 0; i < in_len; i++ )
+                data[i] = ( i & 0xff ) ^ rec_num;
+
+            /* Get the function's result */
+            TEST_CF_SECRET( &in_len, sizeof( in_len ) );
+            TEST_ASSERT( 0 == mbedtls_ssl_cf_hmac( &ctx, add_data, sizeof( add_data ),
+                                                   data, in_len,
+                                                   min_in_len, max_in_len,
+                                                   out ) );
+            TEST_CF_PUBLIC( &in_len, sizeof( in_len ) );
+            TEST_CF_PUBLIC( out, out_len );
+
+            /* Compute the reference result */
+            TEST_ASSERT( 0 == mbedtls_md_hmac_update( &ref_ctx, add_data,
+                                                      sizeof( add_data ) ) );
+            TEST_ASSERT( 0 == mbedtls_md_hmac_update( &ref_ctx, data, in_len ) );
+            TEST_ASSERT( 0 == mbedtls_md_hmac_finish( &ref_ctx, ref_out ) );
+            TEST_ASSERT( 0 == mbedtls_md_hmac_reset( &ref_ctx ) );
+
+            /* Compare */
+            TEST_ASSERT( 0 == memcmp( out, ref_out, out_len ) );
+        }
+
+        mbedtls_free( data );
+        data = NULL;
+    }
+
+exit:
+    mbedtls_md_free( &ref_ctx );
+    mbedtls_md_free( &ctx );
+
+    mbedtls_free( data );
+    mbedtls_free( out );
+}
+/* END_CASE */
+
+/* BEGIN_CASE depends_on:MBEDTLS_SSL_SOME_SUITES_USE_TLS_CBC */
+void ssl_cf_memcpy_offset( int offset_min, int offset_max, int len )
+{
+    unsigned char *dst = NULL;
+    unsigned char *src = NULL;
+    size_t src_len = offset_max + len;
+    size_t secret;
+
+    dst = mbedtls_calloc( 1, len );
+    TEST_ASSERT( dst != NULL );
+    src = mbedtls_calloc( 1, src_len );
+    TEST_ASSERT( src != NULL );
+
+    /* Fill src in a way that we can detect if we copied the right bytes */
+    rnd_std_rand( NULL, src, src_len );
+
+    for( secret = offset_min; secret <= (size_t) offset_max; secret++ )
+    {
+        TEST_CF_SECRET( &secret, sizeof( secret ) );
+        mbedtls_ssl_cf_memcpy_offset( dst, src, secret,
+                                      offset_min, offset_max, len );
+        TEST_CF_PUBLIC( &secret, sizeof( secret ) );
+        TEST_CF_PUBLIC( dst, len );
+
+        TEST_ASSERT( memcmp( dst, src + secret, len ) == 0 );
+    }
+
+exit:
+    mbedtls_free( dst );
+    mbedtls_free( src );
+}
+/* END_CASE */
diff --git a/tests/suites/test_suite_version.data b/tests/suites/test_suite_version.data
index 8e49af8..15964d5 100644
--- a/tests/suites/test_suite_version.data
+++ b/tests/suites/test_suite_version.data
@@ -1,8 +1,8 @@
 Check compiletime library version
-check_compiletime_version:"2.7.16"
+check_compiletime_version:"2.7.17"
 
 Check runtime library version
-check_runtime_version:"2.7.16"
+check_runtime_version:"2.7.17"
 
 Check for MBEDTLS_VERSION_C
 check_feature:"MBEDTLS_VERSION_C":0
diff --git a/tests/suites/test_suite_x509parse.data b/tests/suites/test_suite_x509parse.data
index 2be9a92..60a3cb7 100644
--- a/tests/suites/test_suite_x509parse.data
+++ b/tests/suites/test_suite_x509parse.data
@@ -1340,10 +1340,60 @@
 depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
 x509parse_crl:"305d3047020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030301430128202abcd170c303831323331323335393539300d06092a864886f70d01010e05000302000100":"":MBEDTLS_ERR_X509_INVALID_FORMAT + MBEDTLS_ERR_ASN1_LENGTH_MISMATCH
 
+# 305c
+#  3047                                   tbsCertList TBSCertList
+#   020100                                version INTEGER OPTIONAL
+#   300d                                  signatureAlgorithm AlgorithmIdentifi
+#    06092a864886f70d01010e
+#    0500
+#   300f                                  issuer Name
+#    310d300b0603550403130441424344
+#   170c303930313031303030303030          thisUpdate Time
+#   3014                                  revokedCertificates
+#    3012                                 entry 1
+#     8202abcd                            userCertificate CertificateSerialNum
+#     170c303831323331323335393539        revocationDate Time
+#  300d                                   signatureAlgorithm AlgorithmIdentifi
+#   06092a864886f70d01010e
+#   0500
+#  03020001                               signatureValue BIT STRING
+# The subsequent TBSCertList negative tests remove or modify some elements.
 X509 CRL ASN1 (TBSCertList, sig present)
 depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
 x509parse_crl:"305c3047020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030301430128202abcd170c303831323331323335393539300d06092a864886f70d01010e050003020001":"CRL version   \: 1\nissuer name   \: CN=ABCD\nthis update   \: 2009-01-01 00\:00\:00\nnext update   \: 0000-00-00 00\:00\:00\nRevoked certificates\:\nserial number\: AB\:CD revocation date\: 2008-12-31 23\:59\:59\nsigned using  \: RSA with SHA-224\n":0
 
+X509 CRL ASN1 (TBSCertList, signatureValue missing)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"30583047020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030301430128202abcd170c303831323331323335393539300d06092a864886f70d01010e0500":"":MBEDTLS_ERR_X509_INVALID_SIGNATURE + MBEDTLS_ERR_ASN1_OUT_OF_DATA
+
+X509 CRL ASN1 (TBSCertList, signatureAlgorithm missing)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"30493047020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030301430128202abcd170c303831323331323335393539":"":MBEDTLS_ERR_X509_INVALID_ALG + MBEDTLS_ERR_ASN1_OUT_OF_DATA
+
+X509 CRL ASN1 (TBSCertList, single empty entry at end)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"30373035020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c30393031303130303030303030023000":"":MBEDTLS_ERR_X509_INVALID_SERIAL + MBEDTLS_ERR_ASN1_OUT_OF_DATA
+
+X509 CRL ASN1 (TBSCertList, good entry then empty entry at end)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"304b3049020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030301630128202abcd170c3038313233313233353935393000":"":MBEDTLS_ERR_X509_INVALID_SERIAL + MBEDTLS_ERR_ASN1_OUT_OF_DATA
+
+X509 CRL ASN1 (TBSCertList, missing time in entry)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"304e3039020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030300630048202abcd300d06092a864886f70d01010e050003020001":"":MBEDTLS_ERR_X509_INVALID_DATE + MBEDTLS_ERR_ASN1_OUT_OF_DATA
+
+X509 CRL ASN1 (TBSCertList, missing time in entry at end)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"303b3039020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030300630048202abcd":"":MBEDTLS_ERR_X509_INVALID_DATE + MBEDTLS_ERR_ASN1_OUT_OF_DATA
+
+X509 CRL ASN1 (TBSCertList, invalid tag for time in entry)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"305c3047020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030301430128202abcd190c303831323331323335393539300d06092a864886f70d01010e050003020001":"":MBEDTLS_ERR_X509_INVALID_DATE + MBEDTLS_ERR_ASN1_UNEXPECTED_TAG
+
+X509 CRL ASN1 (TBSCertList, invalid tag for serial)
+depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
+x509parse_crl:"305c3047020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030301430128402abcd170c303831323331323335393539300d06092a864886f70d01010e050003020001":"":MBEDTLS_ERR_X509_INVALID_SERIAL + MBEDTLS_ERR_ASN1_UNEXPECTED_TAG
+
 X509 CRL ASN1 (TBSCertList, no entries)
 depends_on:MBEDTLS_RSA_C:MBEDTLS_SHA256_C
 x509parse_crl:"30463031020100300d06092a864886f70d01010e0500300f310d300b0603550403130441424344170c303930313031303030303030300d06092a864886f70d01010e050003020001":"CRL version   \: 1\nissuer name   \: CN=ABCD\nthis update   \: 2009-01-01 00\:00\:00\nnext update   \: 0000-00-00 00\:00\:00\nRevoked certificates\:\nsigned using  \: RSA with SHA-224\n":0