2016-11-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-opc.c (insert_ra_chk): New function.
	(insert_rb_chk): Likewise.
	(insert_rad): Update text error message.
	(insert_rcd): Likewise.
	(insert_rhv2): Likewise.
	(insert_r0): Likewise.
	(insert_r1): Likewise.
	(insert_r2): Likewise.
	(insert_r3): Likewise.
	(insert_sp): Likewise.
	(insert_gp): Likewise.
	(insert_pcl): Likewise.
	(insert_blink): Likewise.
	(insert_ilink1): Likewise.
	(insert_ilink2): Likewise.
	(insert_ras): Likewise.
	(insert_rbs): Likewise.
	(insert_rcs): Likewise.
	(insert_simm3s): Likewise.
	(insert_rrange): Likewise.
	(insert_fpel): Likewise.
	(insert_blinkel): Likewise.
	(insert_pcel): Likewise.
	(insert_nps_3bit_dst): Likewise.
	(insert_nps_3bit_dst_short): Likewise.
	(insert_nps_3bit_src2_short): Likewise.
	(insert_nps_bitop_size_2b): Likewise.
	(MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Likewise.
	(RA_CHK): Define.
	(RB): Adjust.
	(RB_CHK): Define.
	(RC): Adjust.
	* arc-dis.c (print_insn_arc): Add LOAD and STORE class.
	* arc-tbl.h (div, divu): All instructions are DIVREM class.
	Change first insn argument to check for LP_COUNT usage.
	(rem): Likewise.
	(ld, ldd): All instructions are LOAD class.  Change first insn
	argument to check for LP_COUNT usage.
	(st, std): All instructions are STORE class.
	(mac, mpy, dmac, mul, dmpy): All instructions are MPY class.
	Change first insn argument to check for LP_COUNT usage.
	(mov): All instructions are MOVE class.  Change first insn
	argument to check for LP_COUNT usage.

2016-11-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (is_compatible_p): Remove function.
	(skip_this_opcode): Don't add any decoding class to decode list.
	Remove warning.
	(find_format_from_table): Go through all opcodes, and warn if we
	use a guessed mnemonic.

2016-11-28  Ramiro Polla  <ramiro@hex-rays.com>
	    Amit Pawar  <amit.pawar@amd.com>

	PR binutils/20637
	* i386-dis.c (get_valid_dis386): Ignore REX_B for 32-bit XOP
	instructions.

2016-11-22  Ambrogino Modigliani  <ambrogino.modigliani@gmail.com>

        * configure: Regenerate.

2016-11-22  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-opc.c (HWS_V8): Definition moved from
	gas/config/tc-sparc.c.
	(HWS_V9): Likewise.
	(HWS_VA): Likewise.
	(HWS_VB): Likewise.
	(HWS_VC): Likewise.
	(HWS_VD): Likewise.
	(HWS_VE): Likewise.
	(HWS_VV): Likewise.
	(HWS_VM): Likewise.
	(HWS2_VM): Likewise.
	(sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of
	existing entries.

2016-11-22  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-tbl.h: Reorder conditional flags with delay flags for 'b'
	instructions.

2016-11-18  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define.
	(aarch64_feature_simd_v8_3, SIMD_V8_3): Define.
	(aarch64_opcode_table): Add fcmla and fcadd.
	(AARCH64_OPERANDS): Add IMM_ROT{1,2,3}.
	* aarch64-asm.h (aarch64_ins_imm_rotate): Declare.
	* aarch64-asm.c (aarch64_ins_imm_rotate): Define.
	* aarch64-dis.h (aarch64_ext_imm_rotate): Declare.
	* aarch64-dis.c (aarch64_ext_imm_rotate): Define.
	* aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}.
	* aarch64-opc.c (fields): Add FLD_rotate{1,2,3}.
	(operand_general_constraint_met_p): Rotate and index range check.
	(aarch64_print_operand): Handle rotate operand.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Likewise.
	* aarch64-opc-2.c: Likewise.

2016-11-18  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (arch64_opcode_table): Add ldaprb, ldaprh, ldapr.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2016-11-18  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (arch64_opcode_table): Add fjcvtzs.
	(QL_FP2INT_W_D, aarch64_feature_fp_v8_3, FP_V8_3): Define.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2016-11-18  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (QL_X1NIL): New.
	(arch64_opcode_table): Add ldraa, ldrab.
	(AARCH64_OPERANDS): Add "ADDR_SIMM10".
	* aarch64-asm.h (aarch64_ins_addr_simm10): Declare.
	* aarch64-asm.c (aarch64_ins_addr_simm10): Define.
	* aarch64-dis.h (aarch64_ext_addr_simm10): Declare.
	* aarch64-dis.c (aarch64_ext_addr_simm10): Define.
	* aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10.
	* aarch64-opc.c (fields): Add data for FLD_S_simm10.
	(operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10.
	(aarch64_print_operand): Likewise.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2016-11-11  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (arch64_opcode_table): Add braa, brab, blraa, blrab, braaz,
	brabz, blraaz, blrabz, retaa, retab, eretaa, eretab.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2016-11-11  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (arch64_opcode_table): Add pacga.
	(AARCH64_OPERANDS): Add Rm_SP.
	* aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_Rm_SP.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2016-11-11  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (arch64_opcode_table): Add pacia, pacib, pacda, pacdb, autia,
	autib, autda, autdb, paciza, pacizb, pacdza, pacdzb, autiza, autizb, autdza,
	autdzb, xpaci, xpacd.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.
	* aarch64-opc-2.c: Regenerate.

2016-11-11  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-opc.c (aarch64_sys_regs): Add apiakeylo_el1, apiakeyhi_el1,
	apibkeylo_el1, apibkeyhi_el1, apdakeylo_el1, apdakeyhi_el1,
	apdbkeylo_el1, apdbkeyhi_el1, apgakeylo_el1 and apgakeyhi_el1.
	(aarch64_sys_reg_supported_p): Add feature test for new registers.

2016-11-11  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-tbl.h (aarch64_feature_v8_3, ARMV8_3, V8_3_INSN): New.
	(arch64_opcode_table): Add xpaclri, pacia1716, pacib1716, autia1716,
	autib1716, paciaz, paciasp, pacibz, pacibsp, autiaz, autiasp, autibz,
	autibsp.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Regenerate.

2016-11-11  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-gen.c (find_alias_opcode): Increase max_num_aliases to 32.

2016-11-09  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/20799
	* i386-dis-evex.h (evex_table): Replace EdqwS with Edqw.
	* i386-dis.c (EdqwS): Removed.
	(dqw_swap_mode): Likewise.
	(intel_operand_size): Don't check dqw_swap_mode.
	(OP_E_register): Likewise.
	(OP_E_memory): Likewise.
	(OP_G): Likewise.
	(OP_EX): Likewise.
	* i386-opc.tbl: Remove "S" from EVEX vpextrw.
	* i386-tbl.h: Regerated.

2016-11-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-opc.tbl: Merge AVX512F vmovq.
	* i386-tbl.h: Regerated.

2016-11-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/20701
	* i386-dis.c (THREE_BYTE_0F7A): Removed.
	(dis386_twobyte): Don't use THREE_BYTE_0F7A.
	(three_byte_table): Remove THREE_BYTE_0F7A.

2016-11-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/20775
	* i386-dis.c (FGRPd9_2): Replace 0 with 1.
	(FGRPd9_4): Replace 1 with 2.
	(FGRPd9_5): Replace 2 with 3.
	(FGRPd9_6): Replace 3 with 4.
	(FGRPd9_7): Replace 4 with 5.
	(FGRPda_5): Replace 5 with 6.
	(FGRPdb_4): Replace 6 with 7.
	(FGRPde_3): Replace 7 with 8.
	(FGRPdf_4): Replace 8 with 9.
	(fgrps): Add an entry for Bad_Opcode.

2016-11-04  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-opc.c (arc_flag_operands): Add F_DI14.
	(arc_flag_classes): Add C_DI14.
	* arc-nps400-tbl.h: Add new exc instructions.

2016-11-03  Graham Markall  <graham.markall@embecosm.com>

	* arc-dis.c (arc_insn_length): Return length 8 for instructions with
	major opcode 0xa.
	* arc-nps-400-tbl.h: Add dcmac instruction.
	* arc-opc.c (arc_operands): Added operands for dcmac instruction.
	(insert_nps_rbdouble_64): Added.
	(extract_nps_rbdouble_64): Added.
	(insert_nps_proto_size): Added.
	(extract_nps_proto_size): Added.

2016-11-03  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-dis.c (struct arc_operand_iterator): Remove all fields
	relating to long instruction processing, add new limm field.
	(OPCODE): Rename to...
	(OPCODE_32BIT_INSN): ...this.
	(OPCODE_AC): Delete.
	(skip_this_opcode): Handle different instruction lengths, update
	macro name.
	(special_flag_p): Update parameter type.
	(find_format_from_table): Update for more instruction lengths.
	(find_format_long_instructions): Delete.
	(find_format): Update for more instruction lengths.
	(arc_insn_length): Likewise.
	(extract_operand_value): Update for more instruction lengths.
	(operand_iterator_next): Remove code relating to long
	instructions.
	(arc_opcode_to_insn_type): New function.
	(print_insn_arc):Update for more instructions lengths.
	* arc-ext.c (extInstruction_t): Change argument type.
	* arc-ext.h (extInstruction_t): Change argument type.
	* arc-fxi.h: Change type unsigned to unsigned long long
	extensively throughout.
	* arc-nps400-tbl.h: Add long instructions taken from
	arc_long_opcodes table in arc-opc.c.
	* arc-opc.c: Update parameter types on insert/extract handlers.
	(arc_long_opcodes): Delete.
	(arc_num_long_opcodes): Delete.
	(arc_opcode_len): Update for more instruction lengths.

2016-11-03  Graham Markall  <graham.markall@embecosm.com>

	* arc-dis.c (print_insn_arc): Swap highbyte and lowbyte.

2016-11-03  Graham Markall  <graham.markall@embecosm.com>

	* arc-dis.c (find_format_from_table): Replace use of ARC_SHORT
	with arc_opcode_len.
	(find_format_long_instructions): Likewise.
	* arc-opc.c (arc_opcode_len): New function.

2016-11-03  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: Fix some instruction masks.

2016-11-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (REG_82): Removed.
	(X86_64_82_REG_0): Likewise.
	(X86_64_82_REG_1): Likewise.
	(X86_64_82_REG_2): Likewise.
	(X86_64_82_REG_3): Likewise.
	(X86_64_82_REG_4): Likewise.
	(X86_64_82_REG_5): Likewise.
	(X86_64_82_REG_6): Likewise.
	(X86_64_82_REG_7): Likewise.
	(X86_64_82): New.
	(dis386): Use X86_64_82 instead of REG_82.
	(reg_table): Remove REG_82.
	(x86_64_table): Add X86_64_82.  Remove X86_64_82_REG_0,
	X86_64_82_REG_1, X86_64_82_REG_2, X86_64_82_REG_3,
	X86_64_82_REG_4, X86_64_82_REG_5, X86_64_82_REG_6 and
	X86_64_82_REG_7.

2016-11-03  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/20754
	* i386-dis.c (REG_82): New.
	(X86_64_82_REG_0): Likewise.
	(X86_64_82_REG_1): Likewise.
	(X86_64_82_REG_2): Likewise.
	(X86_64_82_REG_3): Likewise.
	(X86_64_82_REG_4): Likewise.
	(X86_64_82_REG_5): Likewise.
	(X86_64_82_REG_6): Likewise.
	(X86_64_82_REG_7): Likewise.
	(dis386): Use REG_82.
	(reg_table): Add REG_82.
	(x86_64_table): Add X86_64_82_REG_0, X86_64_82_REG_1,
	X86_64_82_REG_2, X86_64_82_REG_3, X86_64_82_REG_4,
	X86_64_82_REG_5, X86_64_82_REG_6 and X86_64_82_REG_7.

2016-11-03  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (REG_82): Renamed to ...
	(REG_83): This.
	(dis386): Updated.
	(reg_table): Likewise.

2016-11-02  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-dis.c (enum): Add PREFIX_EVEX_0F3852, PREFIX_EVEX_0F3853.
	* i386-dis-evex.h (evex_table): Updated.
	* i386-gen.c (cpu_flag_init): Add CPU_AVX512_4VNNIW_FLAGS,
	CPU_ANY_AVX512_4VNNIW_FLAGS. Update CPU_ANY_AVX512F_FLAGS.
	(cpu_flags): Add CpuAVX512_4VNNIW.
	* i386-opc.h (enum): (AVX512_4VNNIW): New.
	(i386_cpu_flags): Add cpuavx512_4vnniw.
	* i386-opc.tbl: Add Intel AVX512_4VNNIW instructions.
	* i386-init.h: Regenerate.
	* i386-tbl.h: Ditto.

2016-11-02  Igor Tsimbalist  <igor.v.tsimbalist@intel.com>

	* i386-dis.c. (enum): Add PREFIX_EVEX_0F389A,
	PREFIX_EVEX_0F389B, PREFIX_EVEX_0F38AA, PREFIX_EVEX_0F38AB.
	* i386-dis-evex.h (evex_table): Updated.
	* i386-gen.c (cpu_flag_init): Add CPU_AVX512_4FMAPS_FLAGS,
	CPU_ANY_AVX512_4FMAPS_FLAGS. Update CPU_ANY_AVX512F_FLAGS.
	(cpu_flags): Add CpuAVX512_4FMAPS.
	(opcode_modifiers): Add ImplicitQuadGroup modifier.
	* i386-opc.h (AVX512_4FMAP): New.
	(i386_cpu_flags): Add cpuavx512_4fmaps.
	(ImplicitQuadGroup): New.
	(i386_opcode_modifier): Add implicitquadgroup.
	* i386-opc.tbl: Add Intel AVX512_4FMAPS instructions.
	* i386-init.h: Regenerate.
	* i386-tbl.h: Ditto.

2016-11-01  Palmer Dabbelt  <palmer@dabbelt.com>
	    Andrew Waterman <andrew@sifive.com>

	Add support for RISC-V architecture.
	* configure.ac: Add entry for bfd_riscv_arch.
	* configure: Regenerate.
	* disassemble.c (disassembler): Add support for riscv.
	(disassembler_usage): Likewise.
	* riscv-dis.c: New file.
	* riscv-opc.c: New file.

2016-10-21  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (PREFIX_RM_0_0FAE_REG_7): Removed.
	(prefix_table): Remove the PREFIX_RM_0_0FAE_REG_7 entry.
	(rm_table): Update the RM_0FAE_REG_7 entry.
	* i386-gen.c (cpu_flag_init): Remove CPU_PCOMMIT_FLAGS.
	(cpu_flags): Remove CpuPCOMMIT.
	* i386-opc.h (CpuPCOMMIT): Removed.
	(i386_cpu_flags): Remove cpupcommit.
	* i386-opc.tbl: Remove pcommit.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2016-10-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutis/20705
	* i386-dis.c (get_valid_dis386): Ignore the REX_B bit and
	the highest bit in VEX.vvvv for the 3-byte VEX prefix in
	32-bit mode.  Don't check vex.register_specifier in 32-bit
	mode.
	(OP_VEX): Check for invalid mask registers.

2016-10-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutis/20699
	* i386-dis.c (OP_E_memory): Check addr32flag in stead of
	sizeflag.

2016-10-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutis/20704
	* i386-dis.c (three_byte_table): Remove the remaining SSE5 support.

2016-10-18  Maciej W. Rozycki  <macro@imgtec.com>

	* aarch64-dis.c (aarch64_ext_sve_addr_rr_lsl): Rename `index'
	local variable to `index_regno'.

2016-10-17  Cupertino Miranda  <cmiranda@synopsys.com>

	* arc-tbl.h: Removed any "inv.+" instructions from the table.

2016-10-14  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (find_format_from_table): Discriminate LIMM indicator
	usage on ISA basis.

2016-10-11  Jiong Wang  <jiong.wang@arm.com>

	PR target/20666
	* aarch64-asm.c (convert_bfc_to_bfm): Fix dest index.

2016-10-07  Jiong Wang  <jiong.wang@arm.com>

	PR target/20667
	* aarch64-opc.c (aarch64_print_operand): Always print operand if it's
	available.

2016-10-07  Alan Modra  <amodra@gmail.com>

	* sh-opc.h (sh_merge_bfd_arch): Delete prototype.

2016-10-06  Alan Modra  <amodra@gmail.com>

	* aarch64-opc.c: Spell fall through comments consistently.
	* i386-dis.c: Likewise.
	* aarch64-dis.c: Add missing fall through comments.
	* aarch64-opc.c: Likewise.
	* arc-dis.c: Likewise.
	* arm-dis.c: Likewise.
	* i386-dis.c: Likewise.
	* m68k-dis.c: Likewise.
	* mep-asm.c: Likewise.
	* ns32k-dis.c: Likewise.
	* sh-dis.c: Likewise.
	* tic4x-dis.c: Likewise.
	* tic6x-dis.c: Likewise.
	* vax-dis.c: Likewise.

2016-10-06  Alan Modra  <amodra@gmail.com>

	* arc-ext.c (create_map): Add missing break.
	* msp430-decode.opc (encode_as): Likewise.
	* msp430-decode.c: Regenerate.

2016-10-06  Alan Modra  <amodra@gmail.com>

	* cr16-dis.c (print_insn_cr16): Don't use boolean OR in arithmetic.
	* crx-dis.c (print_insn_crx): Likewise.

2016-09-30  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/20657
	* i386-dis.c (putop): Don't assign alt twice.

2016-09-29  Jiong Wang  <jiong.wang@arm.com>

	PR target/20553
	* aarch64-tbl.h (fmla, fmls, fmul, fmulx): Fix opcode mask field.

2016-09-29  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (L): Make compulsory.
	(LOPT): New, optional form of L.
	(HTM_R): Define as LOPT.
	(L0, L1): Delete.
	(L32OPT): New, optional for 32-bit L.
	(L2OPT): New, 2-bit L for dcbf.
	(SVC_LEC): Update.
	(L2): Define.
	(insert_l0, extract_l0, insert_l1, extract_l2): Delete.
	(powerpc_opcodes <cmpli, cmpi, cmpl, cmp>): Use L32OPT.
	<dcbf>: Use L2OPT.
	<tlbiel, tlbie>: Use LOPT.
	<wclr, wclrall>: Use L2.

2016-09-26  Vlad Zakharov  <vzakhar@synopsys.com>

	* Makefile.in: Regenerate.
	* configure: Likewise.

2016-09-26  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-ext-tbl.h (EXTINSN2OPF): Define.
	(EXTINSN2OP): Use EXTINSN2OPF.
	(bspeekm, bspop, modapp): New extension instructions.
	* arc-opc.c (F_DNZ_ND): Define.
	(F_DNZ_D): Likewise.
	(F_SIZEB1): Changed.
	(C_DNZ_D): Define.
	(C_HARD): Changed.
	* arc-tbl.h (dbnz): New instruction.
	(prealloc): Allow it for ARC EM.
	(xbfu): Likewise.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (print_immediate_offset_address): Print spaces
	after commas in addresses.
	(aarch64_print_operand): Likewise.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (operand_general_constraint_met_p): Use "must be"
	rather than "should be" or "expected to be" in error messages.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-dis.c (remove_dot_suffix): New function, split out from...
	(print_mnemonic_name): ...here.
	(print_comment): New function.
	(print_aarch64_insn): Call it.
	* aarch64-opc.c (aarch64_conds): Add SVE names.
	(aarch64_print_operand): Print alternative condition names in
	a comment.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (OP_SVE_B, OP_SVE_BB, OP_SVE_BBBU, OP_SVE_BMB)
	(OP_SVE_BPB, OP_SVE_BUB, OP_SVE_BUBB, OP_SVE_BUU, OP_SVE_BZ)
	(OP_SVE_BZB, OP_SVE_BZBB, OP_SVE_BZU, OP_SVE_DD, OP_SVE_DDD)
	(OP_SVE_DMD, OP_SVE_DMH, OP_SVE_DMS, OP_SVE_DU, OP_SVE_DUD, OP_SVE_DUU)
	(OP_SVE_DUV_BHS, OP_SVE_DUV_BHSD, OP_SVE_DZD, OP_SVE_DZU, OP_SVE_HB)
	(OP_SVE_HMD, OP_SVE_HMS, OP_SVE_HU, OP_SVE_HUU, OP_SVE_HZU, OP_SVE_RR)
	(OP_SVE_RURV_BHSD, OP_SVE_RUV_BHSD, OP_SVE_SMD, OP_SVE_SMH, OP_SVE_SMS)
	(OP_SVE_SU, OP_SVE_SUS, OP_SVE_SUU, OP_SVE_SZS, OP_SVE_SZU, OP_SVE_UB)
	(OP_SVE_UUD, OP_SVE_UUS, OP_SVE_VMR_BHSD, OP_SVE_VMU_SD)
	(OP_SVE_VMVD_BHS, OP_SVE_VMVU_BHSD, OP_SVE_VMVU_SD, OP_SVE_VMVV_BHSD)
	(OP_SVE_VMVV_SD, OP_SVE_VMV_BHSD, OP_SVE_VMV_HSD, OP_SVE_VMV_SD)
	(OP_SVE_VM_SD, OP_SVE_VPU_BHSD, OP_SVE_VPV_BHSD, OP_SVE_VRR_BHSD)
	(OP_SVE_VRU_BHSD, OP_SVE_VR_BHSD, OP_SVE_VUR_BHSD, OP_SVE_VUU_BHSD)
	(OP_SVE_VUVV_BHSD, OP_SVE_VUVV_SD, OP_SVE_VUV_BHSD, OP_SVE_VUV_SD)
	(OP_SVE_VU_BHSD, OP_SVE_VU_HSD, OP_SVE_VU_SD, OP_SVE_VVD_BHS)
	(OP_SVE_VVU_BHSD, OP_SVE_VVVU_SD, OP_SVE_VVV_BHSD, OP_SVE_VVV_SD)
	(OP_SVE_VV_BHSD, OP_SVE_VV_HSD_BHS, OP_SVE_VV_SD, OP_SVE_VWW_BHSD)
	(OP_SVE_VXX_BHSD, OP_SVE_VZVD_BHS, OP_SVE_VZVU_BHSD, OP_SVE_VZVV_BHSD)
	(OP_SVE_VZVV_SD, OP_SVE_VZV_SD, OP_SVE_V_SD, OP_SVE_WU, OP_SVE_WV_BHSD)
	(OP_SVE_XU, OP_SVE_XUV_BHSD, OP_SVE_XVW_BHSD, OP_SVE_XV_BHSD)
	(OP_SVE_XWU, OP_SVE_XXU): New macros.
	(aarch64_feature_sve): New variable.
	(SVE): New macro.
	(_SVE_INSN): Likewise.
	(aarch64_opcode_table): Add SVE instructions.
	* aarch64-opc.h (extract_fields): Declare.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm.c (do_misc_encoding): Handle the new SVE aarch64_ops.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.c (extract_fields): Make global.
	(do_misc_decoding): Handle the new SVE aarch64_ops.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16)
	(FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New
	aarch64_field_kinds.
	* aarch64-opc.c (fields): Add corresponding entries.
	* aarch64-asm.c (aarch64_get_variant): New function.
	(aarch64_encode_variant_using_iclass): Likewise.
	(aarch64_opcode_encode): Call it.
	* aarch64-dis.c (aarch64_decode_variant_using_iclass): New function.
	(aarch64_opcode_decode): Call it.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core
	and FP register operands.
	* aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm)
	(FLD_SVE_Vn): New aarch64_field_kinds.
	* aarch64-opc.c (fields): Add corresponding entries.
	(aarch64_print_operand): Handle the new SVE core and FP register
	operands.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm-2.c: Likewise.
	* aarch64-dis-2.c: Likewise.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP
	immediate operands.
	* aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind.
	* aarch64-opc.c (fields): Add corresponding entry.
	(operand_general_constraint_met_p): Handle the new SVE FP immediate
	operands.
	(aarch64_print_operand): Likewise.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two)
	(ins_sve_float_zero_one): New inserters.
	* aarch64-asm.c (aarch64_ins_sve_float_half_one): New function.
	(aarch64_ins_sve_float_half_two): Likewise.
	(aarch64_ins_sve_float_zero_one): Likewise.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two)
	(ext_sve_float_zero_one): New extractors.
	* aarch64-dis.c (aarch64_ext_sve_float_half_one): New function.
	(aarch64_ext_sve_float_half_two): Likewise.
	(aarch64_ext_sve_float_zero_one): Likewise.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
	integer immediate operands.
	* aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5)
	(FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9)
	(FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds.
	* aarch64-opc.c (fields): Add corresponding entries.
	(operand_general_constraint_met_p): Handle the new SVE integer
	immediate operands.
	(aarch64_print_operand): Likewise.
	(aarch64_sve_dupm_mov_immediate_p): New function.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm)
	(ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters.
	* aarch64-asm.c (aarch64_ins_limm_1): New function, split out from...
	(aarch64_ins_limm): ...here.
	(aarch64_ins_inv_limm): New function.
	(aarch64_ins_sve_aimm): Likewise.
	(aarch64_ins_sve_asimm): Likewise.
	(aarch64_ins_sve_limm_mov): Likewise.
	(aarch64_ins_sve_shlimm): Likewise.
	(aarch64_ins_sve_shrimm): Likewise.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm)
	(ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors.
	* aarch64-dis.c (decode_limm): New function, split out from...
	(aarch64_ext_limm): ...here.
	(aarch64_ext_inv_limm): New function.
	(decode_sve_aimm): Likewise.
	(aarch64_ext_sve_aimm): Likewise.
	(aarch64_ext_sve_asimm): Likewise.
	(aarch64_ext_sve_limm_mov): Likewise.
	(aarch64_top_bit): Likewise.
	(aarch64_ext_sve_shlimm): Likewise.
	(aarch64_ext_sve_shrimm): Likewise.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL
	operands.
	* aarch64-opc.c (aarch64_operand_modifiers): Initialize
	the AARCH64_MOD_MUL_VL entry.
	(value_aligned_p): Cope with non-power-of-two alignments.
	(operand_general_constraint_met_p): Handle the new MUL VL addresses.
	(print_immediate_offset_address): Likewise.
	(aarch64_print_operand): Likewise.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl)
	(ins_sve_addr_ri_s9xvl): New inserters.
	* aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function.
	(aarch64_ins_sve_addr_ri_s6xvl): Likewise.
	(aarch64_ins_sve_addr_ri_s9xvl): Likewise.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl)
	(ext_sve_addr_ri_s9xvl): New extractors.
	* aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function.
	(aarch64_ext_sve_addr_ri_s4xvl): Likewise.
	(aarch64_ext_sve_addr_ri_s6xvl): Likewise.
	(aarch64_ext_sve_addr_ri_s9xvl): Likewise.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
	address operands.
	* aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14)
	(FLD_SVE_xs_22): New aarch64_field_kinds.
	(OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags.
	(get_operand_specific_data): New function.
	* aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz,
	FLD_SVE_xs_14 and FLD_SVE_xs_22.
	(operand_general_constraint_met_p): Handle the new SVE address
	operands.
	(sve_reg): New array.
	(get_addr_sve_reg_name): New function.
	(aarch64_print_operand): Handle the new SVE address operands.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl)
	(ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl)
	(ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters.
	* aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function.
	(aarch64_ins_sve_addr_rr_lsl): Likewise.
	(aarch64_ins_sve_addr_rz_xtw): Likewise.
	(aarch64_ins_sve_addr_zi_u5): Likewise.
	(aarch64_ins_sve_addr_zz): Likewise.
	(aarch64_ins_sve_addr_zz_lsl): Likewise.
	(aarch64_ins_sve_addr_zz_sxtw): Likewise.
	(aarch64_ins_sve_addr_zz_uxtw): Likewise.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl)
	(ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl)
	(ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors.
	* aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function.
	(aarch64_ext_sve_addr_ri_u6): Likewise.
	(aarch64_ext_sve_addr_rr_lsl): Likewise.
	(aarch64_ext_sve_addr_rz_xtw): Likewise.
	(aarch64_ext_sve_addr_zi_u5): Likewise.
	(aarch64_ext_sve_addr_zz): Likewise.
	(aarch64_ext_sve_addr_zz_lsl): Likewise.
	(aarch64_ext_sve_addr_zz_sxtw): Likewise.
	(aarch64_ext_sve_addr_zz_uxtw): Likewise.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for
	AARCH64_OPND_SVE_PATTERN_SCALED.
	* aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind.
	* aarch64-opc.c (fields): Add a corresponding entry.
	(set_multiplier_out_of_range_error): New function.
	(aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL.
	(operand_general_constraint_met_p): Handle
	AARCH64_OPND_SVE_PATTERN_SCALED.
	(print_register_offset_address): Use PRIi64 to print the
	shift amount.
	(aarch64_print_operand): Likewise.  Handle
	AARCH64_OPND_SVE_PATTERN_SCALED.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm.h (ins_sve_scale): New inserter.
	* aarch64-asm.c (aarch64_ins_sve_scale): New function.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.h (ext_sve_scale): New inserter.
	* aarch64-dis.c (aarch64_ext_sve_scale): New function.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for
	AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP.
	* aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind.
	(FLD_SVE_prfop): Likewise.
	* aarch64-opc.c: Include libiberty.h.
	(aarch64_sve_pattern_array): New variable.
	(aarch64_sve_prfop_array): Likewise.
	(fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop.
	(aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and
	AARCH64_OPND_SVE_PRFOP.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis-2.c: Likewise.
	* aarch64-opc-2.c: Likewise.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (aarch64_opnd_qualifiers): Add entries for
	AARCH64_OPND_QLF_P_[ZM].
	(aarch64_print_operand): Print /z and /m where appropriate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands.
	* aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5)
	(FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt)
	(FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16)
	(FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds.
	* aarch64-opc.c (fields): Add corresponding entries here.
	(operand_general_constraint_met_p): Check that SVE register lists
	have the correct length.  Check the ranges of SVE index registers.
	Check for cases where p8-p15 are used in 3-bit predicate fields.
	(aarch64_print_operand): Handle the new SVE operands.
	* aarch64-opc-2.c: Regenerate.
	* aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters.
	* aarch64-asm.c (aarch64_ins_sve_index): New function.
	(aarch64_ins_sve_reglist): Likewise.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors.
	* aarch64-dis.c (aarch64_ext_sve_index): New function.
	(aarch64_ext_sve_reglist): Likewise.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN)
	(_CRC_INSN, _LSE_INSN, _LOR_INSN, RDMA_INSN, FP16_INSN, SF16_INSN)
	(V8_2_INSN, aarch64_opcode_table): Initialize tied_operand field.
	* aarch64-opc.c (aarch64_match_operands_constraint): Check for
	tied operands.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (get_offset_int_reg_name): New function.
	(print_immediate_offset_address): Likewise.
	(print_register_offset_address): Take the base and offset
	registers as parameters.
	(aarch64_print_operand): Update caller accordingly.  Use
	print_immediate_offset_address.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (BANK): New macro.
	(R32, R64): Take a register number as argument
	(int_reg): Use BANK.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (print_register_list): Add a prefix parameter.
	(aarch64_print_operand): Update accordingly.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (AARCH64_OPERNADS): Use fpimm rather than imm
	for FPIMM.
	* aarch64-asm.h (ins_fpimm): New inserter.
	* aarch64-asm.c (aarch64_ins_fpimm): New function.
	* aarch64-asm-2.c: Regenerate.
	* aarch64-dis.h (ext_fpimm): New extractor.
	* aarch64-dis.c (aarch64_ext_imm): Remove fpimm test.
	(aarch64_ext_fpimm): New function.
	* aarch64-dis-2.c: Regenerate.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-asm.c: Include libiberty.h.
	(insert_fields): New function.
	(aarch64_ins_imm): Use it.
	* aarch64-dis.c (extract_fields): New function.
	(aarch64_ext_imm): Use it.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (aarch64_logical_immediate_p): Replace is32
	with an esize parameter.
	(operand_general_constraint_met_p): Update accordingly.
	Fix misindented code.
	* aarch64-asm.c (aarch64_ins_limm): Update call to
	aarch64_logical_immediate_p.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (match_operands_qualifier): Handle F_STRICT.

2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-gen.c (indented_print): Avoid hard-coded indentation limit.

2016-09-15  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (find_format): Walk the linked list pointed by einsn.

2016-09-14  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-opc.c (powerpc_opcodes) <slbiag>: New mnemonic.
	<addex., brd, brh, brw, lwzmx, nandxor, rldixor, setbool,
	xor3>: Delete mnemonics.
	<cp_abort>: Rename mnemonic from ...
	<cpabort>: ...to this.
	<setb>: Change to a X form instruction.
	<sync>: Change to 1 operand form.
	<copy>: Delete mnemonic.
	<copy_first>: Rename mnemonic from ...
	<copy>: ...to this.
	<paste, paste.>: Delete mnemonics.
	<paste_last>: Rename mnemonic from ...
	<paste.>: ...to this.

2016-09-14  Anton Kolesov  <Anton.Kolesov@synopsys.com>

	* arc-dis.c (arc_get_disassembler): Accept a null bfd gracefully.

2016-09-12  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* s390-mkopc.c (main): Support alternate arch strings.

2016-09-12  Patrick Steuer  <steuer@linux.vnet.ibm.com>

	* s390-opc.txt: Fix kmctr instruction type.

2016-09-07  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Remove CPU_IAMCU_COMPAT_FLAGS.
	* i386-init.h: Regenerated.

2016-08-30  Cupertino Miranda  <cmiranda@synopsys.com>

	* opcodes/arc-dis.c (print_insn_arc): Changed.

2016-08-26  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-opc.c (sparc_opcodes): Fix typo in opcode, camellia_fi ->
	camellia_fl.

2016-08-26  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* arm-dis.c (psr_name): Use hex as case labels.  Add detection for
	MSPLIM, PSPLIM, MSPLIM_NS, PSPLIM_NS, PRIMASK_NS, BASEPRI_NS,
	FAULTMASK_NS, CONTROL_NS and SP_NS special registers.

2016-08-24  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (PREFIX_MOD_0_0FAE_REG_4): New.
	(PREFIX_MOD_3_0FAE_REG_4): Likewise.
	(prefix_table): Add PREFIX_MOD_0_0FAE_REG_4 and
	PREFIX_MOD_3_0FAE_REG_4.
	(mod_table): Use PREFIX_MOD_0_0FAE_REG_4 and
	PREFIX_MOD_3_0FAE_REG_4.
	* i386-gen.c (cpu_flag_init): Add CPU_PTWRITE_FLAGS.
	(cpu_flags): Add CpuPTWRITE.
	* i386-opc.h (CpuPTWRITE): New.
	(i386_cpu_flags): Add cpuptwrite.
	* i386-opc.tbl: Add ptwrite instruction.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2016-08-24  Anton Kolesov  <Anton.Kolesov@synopsys.com>

	* arc-dis.h: Wrap around in extern "C".

2016-08-23  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (V8_2_INSN): New macro.
	(aarch64_opcode_table): Use it.

2016-08-23  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (aarch64_opcode_table): Make more use of
	CORE_INSN, __FP_INSN and SIMD_INSN.

2016-08-23  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN): Add OP parameter.
	(aarch64_opcode_table): Update uses accordingly.

2016-07-25  Andrew Jenner  <andrew@codesourcery.com>
	Kwok Cheung Yeung  <kcy@codesourcery.com>

	opcodes/
	* ppc-opc.c (vle_opcodes): Alias 'e_cmpwi' to 'e_cmpi' and
	'e_cmplwi' to 'e_cmpli' instead.
	(OPVUPRT, OPVUPRT_MASK): Define.
	(powerpc_opcodes): Add E200Z4 insns.
	(vle_opcodes): Add context save/restore insns.

2016-07-27  Maciej W. Rozycki  <macro@imgtec.com>

	* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
	"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
	"j".

2016-07-27  Graham Markall  <graham.markall@embecosm.com>

        * arc-nps400-tbl.h: Change block comments to GNU format.
        * arc-dis.c: Add new globals addrtypenames,
        addrtypenames_max, and addtypeunknown.
        (get_addrtype): New function.
        (print_insn_arc): Print colons and address types when
        required.
        * arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
        define insert and extract functions for all address types.
        (arc_operands): Add operands for colon and all address
        types.
        * arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
        * arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
        insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
        * arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
        * arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
        insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.

2016-07-21  H.J. Lu  <hongjiu.lu@intel.com>

	* configure: Regenerated.

2016-07-20  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (skipclass): New structure.
	(decodelist): New variable.
	(is_compatible_p): New function.
	(new_element): Likewise.
	(skip_class_p): Likewise.
	(find_format_from_table): Use skip_class_p function.
	(find_format): Decode first the extension instructions.
	(print_insn_arc): Select either ARCEM or ARCHS based on elf
	e_flags.
	(parse_option): New function.
	(parse_disassembler_options): Likewise.
	(print_arc_disassembler_options): Likewise.
	(print_insn_arc): Use parse_disassembler_options function.  Proper
	select ARCv2 cpu variant.
	* disassemble.c (disassembler_usage): Add ARC disassembler
	options.

2016-07-13  Maciej W. Rozycki  <macro@imgtec.com>

	* mips-opc.c (mips_builtin_opcodes): Remove the INSN2_ALIAS
	annotation from the "nal" entry and reorder it beyond "bltzal".

2016-07-12  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-opc.c (ldtxa): New macro.
	(sparc_opcodes): Use the macro defined above to add entries for
	the LDTXA instructions.
	(asi_table): Add the ASI_TWINX_* asis used in the LDTXA
	instruction.

2016-07-07  James Bowman  <james.bowman@ftdichip.com>

	* ft32-opc.c (ft32_opc_info): Correct mask for "callc"
	and "jmpc".

2016-07-01  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (movzbl, movzbw, movzbq, movzwl, movzwq): Remove.
	(movzb): Adjust to cover all permitted suffixes.
	(movzw): New.
	* i386-tbl.h: Re-generate.

2016-07-01  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (jmp): Remove Disp32S from non-64-bit variant.
	(lgdt): Remove Tbyte from non-64-bit variant.
	(fxsave64, fxrstor64, xsave64, xrstor64, xsaveopt64, xrstors64,
	xsaves64, xsavec64): Remove Disp16.
	(cvtsi2ss, cvtsi2sd, invept, invvpid, invpcid, vcvtsi2sd):
	Remove Disp32S from non-64-bit variants. Remove Disp16 from
	64-bit variants.
	(vcvtsi2ss, vcvtsd2si, vcvtsd2usi, vcvtsi2sd, vcvtusi2sd,
	vcvtusi2ss, vcvtss2si, vcvtss2usi, vcvttsd2si, vcvttsd2usi,
	vcvttss2si, vcvttss2usi, vmovd, vmovq): Remove Disp16 from
	64-bit variants.
	* i386-tbl.h: Re-generate.

2016-07-01  Jan Beulich  <jbeulich@suse.com>

	* i386-opc.tbl (xlat): Remove RepPrefixOk.
	* i386-tbl.h: Re-generate.

2016-06-30  Yao Qi  <yao.qi@linaro.org>

	* arm-dis.c (print_insn): Fix typo in comment.

2016-06-28  Richard Sandiford  <richard.sandiford@arm.com>

	* aarch64-opc.c (operand_general_constraint_met_p): Check the
	range of ldst_elemlist operands.
	(print_register_list): Use PRIi64 to print the index.
	(aarch64_print_operand): Likewise.

2016-06-25  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

	* mcore-opc.h: Remove sentinal.
	* mcore-dis.c (print_insn_mcore): Adjust.

2016-06-23  Graham Markall  <graham.markall@embecosm.com>

	* arc-opc.c: Correct description of availability of NPS400
	features.

2016-06-22  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-opc.c (RM, DRM, VXASH, VXASH_MASK, XMMF, XMMF_MASK): New defines.
	(powerpc_opcodes) <brd, brh, brw, mffsce, mffscdrn, mffscdrni,
	mffscrn, mffscrni, mffsl, nandxor, rldixor, setbool,
	xor3>: New mnemonics.
	<setb>: Change to a VX form instruction.
	(insert_sh6): Add support for rldixor.
	(extract_sh6): Likewise.

2016-06-22  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

	* arc-ext.h: Wrap in extern C.

2016-06-21  Graham Markall  <graham.markall@embecosm.com>

	* arc-dis.c (arc_insn_length): Add comment on instruction length.
	Use same method for determining	instruction length on ARC700 and
	NPS-400.
	(arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400.
	* arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions
	with the NPS400 subclass.
	* arc-opc.c: Likewise.

2016-06-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-opc.c (rdasr): New macro.
	(wrasr): Likewise.
	(rdpr): Likewise.
	(wrpr): Likewise.
	(rdhpr): Likewise.
	(wrhpr): Likewise.
	(sparc_opcodes): Use the macros above to fix and expand the
	definition of read/write instructions from/to
	asr/privileged/hyperprivileged instructions.
	* sparc-dis.c (v9_hpriv_reg_names): Add %hmcdper, %hmcddfr and
	%hva_mask_nz.  Prefer softint_set and softint_clear over
	set_softint and clear_softint.
	(print_insn_sparc): Support %ver in Rd.

2016-06-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-opc.c (sparc_opcodes): Adjust instructions opcode
	architecture according to the hardware capabilities they require.

2016-06-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}.
	(compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and
	bfd_mach_sparc_v9{c,d,e,v,m}.
	* sparc-opc.c (MASK_V9C): Define.
	(MASK_V9D): Likewise.
	(MASK_V9E): Likewise.
	(MASK_V9V): Likewise.
	(MASK_V9M): Likewise.
	(v6): Add MASK_V9{C,D,E,V,M}.
	(v6notlet): Likewise.
	(v7): Likewise.
	(v8): Likewise.
	(v9): Likewise.
	(v9andleon): Likewise.
	(v9a): Likewise.
	(v9b): Likewise.
	(v9c): Define.
	(v9d): Likewise.
	(v9e): Likewise.
	(v9v): Likewise.
	(v9m): Likewise.
	(sparc_opcode_archs): Add entry for v9{c,d,e,v,m}.

2016-06-15  Nick Clifton  <nickc@redhat.com>

	* nds32-dis.c (nds32_parse_audio_ext): Change printing of integer
	constants to match expected behaviour.
	(nds32_parse_opcode): Likewise.  Also for whitespace.

2016-06-15  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-opc.c (extract_rhv1): Extract value from insn.

2016-06-14  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add ldbit instruction.
	* arc-opc.c: Add flag classes required for ldbit.

2016-06-14  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add hash, hash.p[0-3], tr, utf8, e4by, and addf
	* arc-opc.c: Add flag classes, insert/extract functions, and operands to
	support the above instructions.

2016-06-14  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add calcbsd, calcbxd, calckey, calcxkey, mxb,
	imxb, addl, subl, andl, orl, xorl, andab, orab, lbdsize, bdlen, csms,
	csma, cbba, zncv, and hofs.
	* arc-opc.c: Add flag classes, insert/extract functions, and operands to
	support the above instructions.

2016-06-06  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add andab and orab instructions.

2016-06-06  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add addl-like instructions.

2016-06-06  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add mxb and imxb instructions.

2016-06-06  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add calcbsd, calcbxd, calckey and calcxkey
	instructions.

2016-06-10  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

	* s390-dis.c (option_use_insn_len_bits_p): New file scope
	variable.
	(init_disasm): Handle new command line option "insnlength".
	(print_s390_disassembler_options): Mention new option in help
	output.
	(print_insn_s390): Use the encoded insn length when dumping
	unknown instructions.

2016-06-03  Pitchumani Sivanupandi  <pitchumani.s@atmel.com>

	* avr-dis.c (avr_operand): Add default data address space origin (0x800000)
	 to the address and set as symbol address for LDS/ STS immediate operands.

2016-06-07  Alan Modra  <amodra@gmail.com>

	* ppc-dis.c (ppc_opts): Delete extraneous parentheses.  Default
	cpu for "vle" to e500.
	* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
	(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
	(PPCNONE): Delete, substitute throughout.
	(powerpc_opcodes): Remove PPCVLE from "flags".  Add to "deprecated"
	except for major opcode 4 and 31.
	(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.

2016-06-07  Matthew Wahab  <matthew.wahab@arm.com>

	* arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with
	ARM_EXT_RAS in relevant entries.

2016-06-03  Peter Bergner <bergner@vnet.ibm.com>

	PR binutils/20196
	* ppc-opc.c (powerpc_opcodes <lbarx, lharx, stbcx., sthcx.>): Enable
	opcodes for E6500.

2016-06-03  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutis/18386
	* i386-dis.c (indirEv): Replace stack_v_mode with indir_v_mode.
	(indir_v_mode): New.
	Add comments for '&'.
	(reg_table): Replace "{T|}" with "{&|}" on call and jmp.
	(putop): Handle '&'.
	(intel_operand_size): Handle indir_v_mode.
	(OP_E_register): Likewise.
	* i386-opc.tbl: Mark 64-bit indirect call/jmp as AMD64.  Add
	64-bit indirect call/jmp for AMD64.
	* i386-tbl.h: Regenerated

2016-06-02  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-dis.c (struct arc_operand_iterator): New structure.
	(find_format_from_table): All the old content from find_format,
	with some minor adjustments, and parameter renaming.
	(find_format_long_instructions): New function.
	(find_format): Rewritten.
	(arc_insn_length): Add LSB parameter.
	(extract_operand_value): New function.
	(operand_iterator_next): New function.
	(print_insn_arc): Use new functions to find opcode, and iterator
	over operands.
	* arc-opc.c (insert_nps_3bit_dst_short): New function.
	(extract_nps_3bit_dst_short): New function.
	(insert_nps_3bit_src2_short): New function.
	(extract_nps_3bit_src2_short): New function.
	(insert_nps_bitop1_size): New function.
	(extract_nps_bitop1_size): New function.
	(insert_nps_bitop2_size): New function.
	(extract_nps_bitop2_size): New function.
	(insert_nps_bitop_mod4_msb): New function.
	(extract_nps_bitop_mod4_msb): New function.
	(insert_nps_bitop_mod4_lsb): New function.
	(extract_nps_bitop_mod4_lsb): New function.
	(insert_nps_bitop_dst_pos3_pos4): New function.
	(extract_nps_bitop_dst_pos3_pos4): New function.
	(insert_nps_bitop_ins_ext): New function.
	(extract_nps_bitop_ins_ext): New function.
	(arc_operands): Add new operands.
	(arc_long_opcodes): New global array.
	(arc_num_long_opcodes): New global.
	* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.

2016-06-01  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

	* nds32-asm.h: Add extern "C".
	* sh-opc.h: Likewise.

2016-06-01  Graham Markall  <graham.markall@embecosm.com>

	* arc-nps400-tbl.h: Add operands a,b,u6, 0,b,u6, and
	0,b,limm to the rflt instruction.

2016-05-31  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

	* sh-opc.h (ARCH_SH_HAS_DSP): Make the shifted value an unsigned
	constant.

2016-05-29  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/20145
	* i386-gen.c (cpu_flag_init): Add CPU_ANY_AVX512F_FLAGS,
	CPU_ANY_AVX512CD_FLAGS, CPU_ANY_AVX512ER_FLAGS,
	CPU_ANY_AVX512PF_FLAGS, CPU_ANY_AVX512DQ_FLAGS,
	CPU_ANY_AVX512BW_FLAGS, CPU_ANY_AVX512VL_FLAGS,
	CPU_ANY_AVX512IFMA_FLAGS and CPU_ANY_AVX512VBMI_FLAGS.
	* i386-init.h: Regenerated.

2016-05-27  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/20145
	* i386-gen.c (cpu_flag_init): Update CPU_XXX_FLAGS.  Remove
	CpuMMX from CPU_SSE_FLAGS.  Remove AVX and AVX512 bits from
	CPU_ANY_SSE_FLAGS.  Remove AVX512 bits from CPU_ANY_AVX_FLAGS.
	Add CPU_XSAVE_FLAGS to CPU_XSAVEOPT_FLAGS, CPU_XSAVE_FLAGS and
	CpuXSAVEC.  Add CPU_AVX_FLAGS to CpuF16C.  Remove CpuMMX from
	CPU_AVX512F_FLAGS, CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS,
	CPU_AVX512PF_FLAGS, CPU_AVX512DQ_FLAGS and CPU_AVX512BW_FLAGS.
	Add CPU_SSE2_FLAGS to CPU_SHA_FLAGS.   Add CPU_ANY_287_FLAGS,
	CPU_ANY_387_FLAGS, CPU_ANY_687_FLAGS, CPU_ANY_SSE2_FLAGS,
	CPU_ANY_SSE3_FLAGS, CPU_ANY_SSSE3_FLAGS, CPU_ANY_SSE4_1_FLAGS,
	CPU_ANY_SSE4_2_FLAGS and CPU_ANY_AVX2_FLAGS.  Enable CpuRegMMX
	for MMX.  Enable CpuRegXMM for SSE, AVX and AVX512.  Enable
	CpuRegYMM for AVX and AVX512VL,  Enable CpuRegZMM and
	CpuRegMask for AVX512.
	(cpu_flags): Add CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM
	and CpuRegMask.
	(set_bitfield_from_cpu_flag_init): New function.
	(set_bitfield): Remove const on f.  Call
	set_bitfield_from_cpu_flag_init to handle CPU_XXX_FLAGS.
	* i386-opc.h (CpuRegMMX): New.
	(CpuRegXMM): Likewise.
	(CpuRegYMM): Likewise.
	(CpuRegZMM): Likewise.
	(CpuRegMask): Likewise.
	(i386_cpu_flags): Add cpuregmmx, cpuregxmm, cpuregymm, cpuregzmm
	and cpuregmask.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2016-05-27  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/20154
	* i386-gen.c (cpu_flags): Remove CpuAMD64 and CpuIntel64.
	(opcode_modifiers): Add AMD64 and Intel64.
	(main): Properly verify CpuMax.
	* i386-opc.h (CpuAMD64): Removed.
	(CpuIntel64): Likewise.
	(CpuMax): Set to CpuNo64.
	(i386_cpu_flags): Remove cpuamd64 and cpuintel64.
	(AMD64): New.
	(Intel64): Likewise.
	(i386_opcode_modifier): Add amd64 and intel64.
	(i386-opc.tbl): Replace CpuAMD64/CpuIntel64 with AMD64/Intel64
	on call and jmp.
	* i386-init.h: Regenerated.
	* i386-tbl.h: Likewise.

2016-05-27  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/20154
	* i386-gen.c (main): Fail if CpuMax is incorrect.
	* i386-opc.h (CpuMax): Set to CpuIntel64.
	* i386-tbl.h: Regenerated.

2016-05-27  Nick Clifton  <nickc@redhat.com>

	PR target/20150
	* msp430-dis.c (msp430dis_read_two_bytes): New function.
	(msp430dis_opcode_unsigned): New function.
	(msp430dis_opcode_signed): New function.
	(msp430_singleoperand): Use the new opcode reading functions.
	Only disassenmble bytes if they were successfully read.
	(msp430_doubleoperand): Likewise.
	(msp430_branchinstr): Likewise.
	(msp430x_callx_instr): Likewise.
	(print_insn_msp430): Check that it is safe to read bytes before
	attempting disassembly.  Use the new opcode reading functions.

2016-05-26  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-opc.c (CY): New define.  Document it.
	(powerpc_opcodes) <addex[.], lwzmx, vmsumudm>: New mnemonics.

2016-05-25  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512DQ_FLAGS,
	CPU_AVX512BW_FLAGS, CPU_AVX512VL_FLAGS, CPU_AVX512IFMA_FLAGS
	and CPU_AVX512VBMI_FLAGS.  Add CpuAVX512DQ, CpuAVX512BW,
	CpuAVX512VL, CpuAVX512IFMA and CpuAVX512VBMI to
	CPU_ANY_AVX_FLAGS.
	* i386-init.h: Regenerated.

2016-05-25  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/20141
	* i386-gen.c (cpu_flag_init): Add CpuVREX to CPU_AVX512F_FLAGS,
	CPU_AVX512CD_FLAGS, CPU_AVX512ER_FLAGS and CPU_AVX512PF_FLAGS.
	* i386-init.h: Regenerated.

2016-05-25  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-gen.c (cpu_flag_init): Rename CPU_ANY87_FLAGS to
	CPU_ANY_X87_FLAGS.  Add CPU_ANY_MMX_FLAGS.
	* i386-init.h: Regenerated.

2016-05-23  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (print_flags): Set branch_delay_insns, and insn_type
	information.
	(print_insn_arc): Set insn_type information.
	* arc-opc.c (C_CC): Add F_CLASS_COND.
	* arc-tbl.h (bbit0, bbit1): Update subclass to COND.
	(beq_s, bge_s, bgt_s, bhi_s, bhs_s): Likewise.
	(ble_s, blo_s, bls_s, blt_s, bne_s): Likewise.
	(breq, breq_s, brge, brhs, brlo, brlt): Likewise.
	(brne, brne_s, jeq_s, jne_s): Likewise.

2016-05-23  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-tbl.h (neg): New instruction variant.

2016-05-23  Cupertino Miranda  <cmiranda@synopsys.com>

	* arc-dis.c (find_format, find_format, get_auxreg)
	(print_insn_arc): Changed.
	* arc-ext.h (INSERT_XOP): Likewise.

2016-05-23  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

	* tic54x-dis.c (sprint_mmr): Adjust.
	* tic54x-opc.c: Likewise.

2016-05-19  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c (NSISIGNOPT): Use insert_nsi and extract_nsi.

2016-05-19  Alan Modra  <amodra@gmail.com>

	* ppc-opc.c: Formatting.
	(NSISIGNOPT): Define.
	(powerpc_opcodes <subis>): Use NSISIGNOPT.

2016-05-18  Maciej W. Rozycki  <macro@imgtec.com>

	* mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand,
	replacing references to `micromips_ase' throughout.
	(_print_insn_mips): Don't use file-level microMIPS annotation to
	determine the disassembly mode with the symbol table.

2016-05-13  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-opc.c (IMM8): Use PPC_OPERAND_SIGNOPT.

2016-05-11  Andrew Bennett  <andrew.bennett@imgtec.com>

	* mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and
	mips64r6.
	* mips-opc.c (D34): New macro.
	(mips_builtin_opcodes): Define bposge32c for DSPr3.

2016-05-10  Alexander Fomin  <alexander.fomin@intel.com>

	* i386-dis.c (prefix_table): Add RDPID instruction.
	* i386-gen.c (cpu_flag_init): Add RDPID flag.
	(cpu_flags): Add RDPID bitfield.
	* i386-opc.h (enum): Add RDPID element.
	(i386_cpu_flags): Add RDPID field.
	* i386-opc.tbl: Add RDPID instruction.
	* i386-init.h: Regenerate.
	* i386-tbl.h: Regenerate.

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
	branch type of a symbol.
	(print_insn): Likewise.

2016-05-10  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M
	Mainline Security Extensions instructions.
	(thumb_opcodes): Add entries for narrow ARMv8-M Security
	Extensions instructions.
	(thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions
	instructions.
	(psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions
	special registers.

2016-05-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-opc.c (sparc_opcodes): Fix mnemonic of faligndatai.

2016-05-03  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-ext.c (dump_ARC_extmap): Handle SYNATX_NOP and SYNTAX_1OP.
	(arcExtMap_genOpcode): Likewise.
	* arc-opc.c (arg_32bit_rc): Define new variable.
	(arg_32bit_u6): Likewise.
	(arg_32bit_limm): Likewise.

2016-05-03  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* aarch64-gen.c (VERIFIER): Define.
	* aarch64-opc.c (VERIFIER): Define.
	(verify_ldpsw): Use static linkage.
	* aarch64-opc.h (verify_ldpsw): Remove.
	* aarch64-tbl.h: Use VERIFIER for verifiers.

2016-04-28  Nick Clifton  <nickc@redhat.com>

	PR target/19722
	* aarch64-dis.c (aarch64_opcode_decode): Run verifier if present.
	* aarch64-opc.c (verify_ldpsw): New function.
	* aarch64-opc.h (verify_ldpsw): New prototype.
	* aarch64-tbl.h: Add initialiser for verifier field.
	(LDPSW): Set verifier to verify_ldpsw.

2016-04-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/19983
	PR binutils/19984
	* i386-dis.c (print_insn): Return -1 if size of bfd_vma is
	smaller than address size.

2016-04-20  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

	* alpha-dis.c: Regenerate.
	* crx-dis.c: Likewise.
	* disassemble.c: Likewise.
	* epiphany-opc.c: Likewise.
	* fr30-opc.c: Likewise.
	* frv-opc.c: Likewise.
	* ip2k-opc.c: Likewise.
	* iq2000-opc.c: Likewise.
	* lm32-opc.c: Likewise.
	* lm32-opinst.c: Likewise.
	* m32c-opc.c: Likewise.
	* m32r-opc.c: Likewise.
	* m32r-opinst.c: Likewise.
	* mep-opc.c: Likewise.
	* mt-opc.c: Likewise.
	* or1k-opc.c: Likewise.
	* or1k-opinst.c: Likewise.
	* tic80-opc.c: Likewise.
	* xc16x-opc.c: Likewise.
	* xstormy16-opc.c: Likewise.

2016-04-19  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: Add addb, subb, adcb, sbcb, andb, xorb, orb,
	fxorb, wxorb, shlb, shrb, notb, cntbb, div, mod, divm, qcmp,
	calcsd, and calcxd instructions.
	* arc-opc.c (insert_nps_bitop_size): Delete.
	(extract_nps_bitop_size): Delete.
	(MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Define, and use.
	(extract_nps_qcmp_m3): Define.
	(extract_nps_qcmp_m2): Define.
	(extract_nps_qcmp_m1): Define.
	(arc_flag_operands): Add F_NPS_SX, F_NPS_AR, F_NPS_AL.
	(arc_flag_classes): Add C_NPS_SX, C_NPS_AR_AL
	(arc_operands): Add NPS_SRC2_POS, NPS_SRC1_POS, NPS_ADDB_SIZE,
	NPS_ANDB_SIZE, NPS_FXORB_SIZ, NPS_WXORB_SIZ, NPS_R_XLDST,
	NPS_DIV_UIMM4, NPS_QCMP_SIZE, NPS_QCMP_M1, NPS_QCMP_M2, and
	NPS_QCMP_M3.

2016-04-19  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: Add dctcp, dcip, dcet, and dcacl instructions.

2016-04-15  H.J. Lu  <hongjiu.lu@intel.com>

	* Makefile.in: Regenerated with automake 1.11.6.
	* aclocal.m4: Likewise.

2016-04-14  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst
	instructions.
	* arc-opc.c (insert_nps_cmem_uimm16): New function.
	(extract_nps_cmem_uimm16): New function.
	(arc_operands): Add NPS_XLDST_UIMM16 operand.

2016-04-14  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-dis.c (arc_insn_length): New function.
	(print_insn_arc): Use arc_insn_length, change insnLen to unsigned.
	(find_format): Change insnLen parameter to unsigned.

2016-04-13  Nick Clifton  <nickc@redhat.com>

	PR target/19937
	* v850-opc.c (v850_opcodes): Correct masks for long versions of
	the LD.B and LD.BU instructions.

2016-04-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-dis.c (find_format): Check for extension flags.
	(print_flags): New function.
	(print_insn_arc): Update for .extCondCode, .extCoreRegister and
	.extAuxRegister.
	* arc-ext.c (arcExtMap_coreRegName): Use
	LAST_EXTENSION_CORE_REGISTER.
	(arcExtMap_coreReadWrite): Likewise.
	(dump_ARC_extmap): Update printing.
	* arc-opc.c (arc_flag_classes): Add F_CLASS_EXTEND flag.
	(arc_aux_regs): Add cpu field.
	* arc-regs.h: Add cpu field, lower case name aux registers.

2016-04-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-tbl.h: Add rtsc, sleep with no arguments.

2016-04-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-opc.c (flags_none, flags_f, flags_cc, flags_ccf):
	Initialize.
	(arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc)
	(arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6)
	(arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm)
	(arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm)
	(arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12)
	(arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc)
	(arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm)
	(arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6)
	(arg_32bit_limms12, arg_32bit_limmlimm): Likewise.
	(arc_opcode arc_opcodes): Null terminate the array.
	(arc_num_opcodes): Remove.
	* arc-ext.h (INSERT_XOP): Define.
	(extInstruction_t): Likewise.
	(arcExtMap_instName): Delete.
	(arcExtMap_insn): New function.
	(arcExtMap_genOpcode): Likewise.
	* arc-ext.c (ExtInstruction): Remove.
	(create_map): Zero initialize instruction fields.
	(arcExtMap_instName): Remove.
	(arcExtMap_insn): New function.
	(dump_ARC_extmap): More info while debuging.
	(arcExtMap_genOpcode): New function.
	* arc-dis.c (find_format): New function.
	(print_insn_arc): Use find_format.
	(arc_get_disassembler): Enable dump_ARC_extmap only when
	debugging.

2016-04-11  Maciej W. Rozycki  <macro@imgtec.com>

	* mips-dis.c (print_mips16_insn_arg): Mask unused extended
	instruction bits out.

2016-04-07  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: Add schd, sync, and hwschd instructions.
	* arc-opc.c (arc_flag_operands): Add new flags.
	(arc_flag_classes): Add new classes.

2016-04-07  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-opc.c (arc_opcodes): Extend comment to discus table layout.

2016-04-05  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: Add movbi, decode1, fbset, fbclear, encode0,
	encode1, rflt, crc16, and crc32 instructions.
	* arc-opc.c (arc_flag_operands): Add F_NPS_R.
	(arc_flag_classes): Add C_NPS_R.
	(insert_nps_bitop_size_2b): New function.
	(extract_nps_bitop_size_2b): Likewise.
	(insert_nps_bitop_uimm8): Likewise.
	(extract_nps_bitop_uimm8): Likewise.
	(arc_operands): Add new operand entries.

2016-04-05  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-regs.h: Add a new subclass field.  Add double assist
	accumulator register values.
	* arc-tbl.h: Use DPA subclass to mark the double assist
	instructions.  Use DPX/SPX subclas to mark the FPX instructions.
	* arc-opc.c (RSP): Define instead of SP.
	(arc_aux_regs): Add the subclass field.

2016-04-05  Jiong Wang  <jiong.wang@arm.com>

	* arm-dis.c: Support FP16 vmul, vmla, vmls (by scalar).

2016-03-31  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-opc.c (arc_operands): Fix operand flags for NPS_R_DST, and
	NPS_R_SRC1.

2016-03-30  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: Add a header comment, and fix some whitespace
	issues.  No functional changes.

2016-03-30  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-regs.h (IC_RAM_ADDRESS, IC_TAG, IC_WP, IC_DATA, CONTROL0)
	(AX2, AY2, MX2, MY2, AY0, AY1, DC_RAM_ADDR, DC_TAG, CONTROL1)
	(RTT): Remove duplicate.
	(LCDINSTR, LCDDATA, LCDSTAT, CC_*, PCT_COUNT*, PCT_SNAP*)
	(PCT_CONFIG*): Remove.
	(D1L, D1H, D2H, D2L): Define.

2016-03-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-ext-tbl.h (dsp_fp_i2flt): Fix typo.

2016-03-29  Claudiu Zissulescu  <claziss@synopsys.com>

	* arc-tbl.h (invld07): Remove.
	* arc-ext-tbl.h: New file.
	* arc-dis.c (FIELDA, FIELDB, FIELDC): Remove.
	* arc-opc.c (arc_opcodes): Add ext-tbl include.

2016-03-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

	Fix -Wstack-usage warnings.
	* aarch64-dis.c (print_operands): Substitute size.
	* aarch64-opc.c (print_register_offset_address): Substitute tblen.

2016-03-22  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* sparc-opc.c (sparc_opcodes): Reorder entries for `rd' in order
	to get a proper diagnostic when an invalid ASR register is used.

2016-03-22  Nick Clifton  <nickc@redhat.com>

	* configure: Regenerate.

2016-03-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-nps400-tbl.h: New file.
	* arc-opc.c: Add top level comment.
	(insert_nps_3bit_dst): New function.
	(extract_nps_3bit_dst): New function.
	(insert_nps_3bit_src2): New function.
	(extract_nps_3bit_src2): New function.
	(insert_nps_bitop_size): New function.
	(extract_nps_bitop_size): New function.
	(arc_flag_operands): Add nps400 entries.
	(arc_flag_classes): Add nps400 entries.
	(arc_operands): Add nps400 entries.
	(arc_opcodes): Add nps400 include.

2016-03-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-opc.c (arc_flag_classes): Convert all flag classes to use
	the new class enum values.

2016-03-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-dis.c (print_insn_arc): Handle nps400.

2016-03-21  Andrew Burgess  <andrew.burgess@embecosm.com>

	* arc-opc.c (BASE): Delete.

2016-03-18  Nick Clifton  <nickc@redhat.com>

	PR target/19721
	* aarch64-tbl.h (aarch64_opcode_table): Fix type of second operand
	of MOV insn that aliases an ORR insn.

2016-03-16  Jiong Wang  <jiong.wang@arm.com>

	* arm-dis.c (neon_opcodes): Support new FP16 instructions.

2016-03-07  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

	* mcore-opc.h: Add const qualifiers.
	* microblaze-opc.h (struct op_code_struct): Likewise.
	* sh-opc.h: Likewise.
	* tic4x-dis.c (tic4x_print_indirect): Likewise.
	(tic4x_print_op): Likewise.

2016-03-02  Alan Modra  <amodra@gmail.com>

	* or1k-desc.h: Regenerate.
	* fr30-ibld.c: Regenerate.
	* rl78-decode.c: Regenerate.

2016-03-01  Nick Clifton  <nickc@redhat.com>

	PR target/19747
	* rl78-dis.c (print_insn_rl78_common): Fix typo.

2016-02-24  Renlin Li  <renlin.li@arm.com>

	* arm-dis.c (coprocessor_opcodes): Add fp16 instruction entries.
	(print_insn_coprocessor): Support fp16 instructions.

2016-02-24  Renlin Li  <renlin.li@arm.com>

	* arm-dis.c (print_insn_coprocessor): Fix mask for vsel, vmaxnm,
	vminnm, vrint(mpna).

2016-02-24  Renlin Li  <renlin.li@arm.com>

	* arm-dis.c (print_insn_coprocessor): Check co-processor number for
	cpd/cpd2, mcr/mcr2, mrc/mrc2, ldc/ldc2, stc/stc2.

2016-02-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (print_insn): Parenthesize expression to prevent
	truncated addresses.
	(OP_J): Likewise.

2016-02-10  Claudiu Zissulescu  <claziss@synopsys.com>
	    Janek van Oirschot  <jvanoirs@synopsys.com>

	* arc-opc.c (arc_relax_opcodes, arc_num_relax_opcodes): New
	variable.

2016-02-04  Nick Clifton  <nickc@redhat.com>

	PR target/19561
	* msp430-dis.c (print_insn_msp430): Add a special case for
	decoding an RRC instruction with the ZC bit set in the extension
	word.

2016-02-02  Andrew Burgess  <andrew.burgess@embecosm.com>

	* cgen-ibld.in (insert_normal): Rework calculation of shift.
	* epiphany-ibld.c: Regenerate.
	* fr30-ibld.c: Regenerate.
	* frv-ibld.c: Regenerate.
	* ip2k-ibld.c: Regenerate.
	* iq2000-ibld.c: Regenerate.
	* lm32-ibld.c: Regenerate.
	* m32c-ibld.c: Regenerate.
	* m32r-ibld.c: Regenerate.
	* mep-ibld.c: Regenerate.
	* mt-ibld.c: Regenerate.
	* or1k-ibld.c: Regenerate.
	* xc16x-ibld.c: Regenerate.
	* xstormy16-ibld.c: Regenerate.

2016-02-02  Andrew Burgess  <andrew.burgess@embecosm.com>

	* epiphany-dis.c: Regenerated from latest cpu files.

2016-02-01  Michael McConville  <mmcco@mykolab.com>

	* cgen-dis.c (count_decodable_bits): Use unsigned value for mask
	test bit.

2016-01-25  Renlin Li  <renlin.li@arm.com>

	* arm-dis.c (mapping_symbol_for_insn): New function.
	(find_ifthen_state): Call mapping_symbol_for_insn().

2016-01-20  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (operand_general_constraint_met_p): Check validity
	of MSR UAO immediate operand.

2016-01-18  Maciej W. Rozycki  <macro@imgtec.com>

	* mips-dis.c (print_insn_micromips): Remove 48-bit microMIPS
	instruction support.

2016-01-17  Alan Modra  <amodra@gmail.com>

	* configure: Regenerate.

2016-01-14  Nick Clifton  <nickc@redhat.com>

	* rl78-decode.opc (rl78_decode_opcode): Add 's' operand to movw
	instructions that can support stack pointer operations.
	* rl78-decode.c: Regenerate.
	* rl78-dis.c: Fix display of stack pointer in MOVW based
	instructions.

2016-01-14  Matthew Wahab  <matthew.wahab@arm.com>

	* aarch64-opc.c (aarch64_sys_reg_supported_p): Merge conditionals
	testing for RAS support.  Add checks for erxfr_el1, erxctlr_el1,
	erxtatus_el1 and erxaddr_el1.

2016-01-12  Matthew Wahab  <matthew.wahab@arm.com>

	* arm-dis.c (arm_opcodes): Add "esb".
	(thumb_opcodes): Likewise.

2016-01-11  Peter Bergner <bergner@vnet.ibm.com>

	* ppc-opc.c <xscmpnedp>: Delete.
	<xvcmpnedp>: Likewise.
	<xvcmpnedp.>: Likewise.
	<xvcmpnesp>: Likewise.
	<xvcmpnesp.>: Likewise.

2016-01-08  Andreas Schwab  <schwab@linux-m68k.org>

	PR gas/13050
	* m68k-opc.c (moveb, movew): For ISA_B/C only allow #,d(An) in
	addition to ISA_A.

2016-01-01  Alan Modra  <amodra@gmail.com>

	Update year range in copyright notice of all files.

For older changes see ChangeLog-2015

Copyright (C) 2016 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: