| [Readline-specific changelog. Descriptions of changes to the source are |
| found in the bash changelog.] |
| |
| 6/9 |
| --- |
| Makefile.in |
| - quote value of ${INSTALL_DATA} when passing it to makes in |
| subdirectories |
| |
| 7/1 |
| --- |
| Makefile.in |
| - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let |
| autoconf set the value itself in the Makefile |
| - removed a stray `-' before $(RANLIB) in the `install' recipe |
| |
| doc/Makefile.in |
| - add a VPATH assignment so the documentation is not remade if it's |
| already up-to-date in the distribution |
| |
| configure.in |
| - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains |
| @LOCAL_LDFLAGS@ |
| |
| 7/9 |
| --- |
| |
| config.h.in |
| - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and |
| STRUCT_WINSIZE_IN_TERMIOS |
| |
| configure.in |
| - call BASH_STRUCT_WINSIZE to look for the definition of |
| `struct winsize' |
| |
| 7/17 |
| ---- |
| configure.in |
| - call AC_MINIX |
| |
| config.h.in |
| - add define line for AC_MINIX |
| |
| 7/18 |
| ---- |
| Makefile.in |
| - add `install-shared' and `uninstall-shared' targets |
| |
| 8/4 |
| --- |
| Makefile.in |
| - install and uninstall libhistory.a in the `install' and |
| `uninstall' targets |
| |
| 9/4 |
| --- |
| configure.in |
| - bumped LIBVERSION up to 2.1.1, indicating that this is patch |
| level 1 to release 2.1 |
| |
| |
| 9/16 |
| ---- |
| Makefile.in |
| - `make distclean' now descends into the `examples' subdir |
| |
| doc/Makefile.in |
| - the `distclean' and `maintainer-clean' targets should remove |
| Makefile |
| |
| examples/Makefile.in |
| - added the various clean targets |
| |
| 4/2 |
| --- |
| configure.in |
| - bumped LIBVERSION up to 2.2 |
| |
| 4/18 |
| ---- |
| [readline-2.2 released] |
| |
| 4/20 |
| ---- |
| Makefile.in |
| - make `libhistory.a' a dependency of `install' |
| - fixed a typo in the recipe for `install' that copied libreadline.a |
| to libhistory.old right after installing it |
| |
| 4/27 |
| ---- |
| doc/Makefile.in |
| - install {readline,history}.info out of the source directory if |
| they are not found in the current (build) directory -- only an |
| issue if the libraries are built in a different directory than |
| the source directory |
| |
| 5/1 |
| --- |
| support/shobj-conf |
| - script from the bash distribution to do shared object and library |
| configuration |
| |
| shlib/Makefile.in |
| - new directory and makefile to handle building shared versions of |
| libreadline and libhistory, controlled by support/shobj-conf |
| |
| 5/7 |
| --- |
| doc/Makefile.in |
| - set SHELL to /bin/sh, rather than relying on make to be correct |
| |
| 5/14 |
| ---- |
| savestring.c |
| - new file, moved from shell.c, for backwards compatibility |
| |
| Makefile.in, shlib/Makefile.in |
| - make sure savestring.c is compiled and added to libreadline and |
| libhistory |
| |
| [THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.] |
| |
| 5/15 |
| ---- |
| README |
| - updated description of shared library creation for the new scheme |
| |
| [THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.] |
| |
| Makefile.in |
| - bumped SHLIB_MAJOR up to 4 since we've augmented the library |
| API |
| - rlconf.h is now one of the installed headers, so applications can |
| find out whether things like vi-mode are available in the installed |
| libreadline |
| |
| 5/20 |
| ---- |
| configure.in |
| - changed RL_LIBRARY_VERSION to 4.0 to match the version of the |
| installed shared libraries |
| |
| 6/5 |
| --- |
| rlstdc.h |
| - new file |
| |
| Makefile.in |
| - rlstdc.h is now one of the installed headers |
| |
| 8/3 |
| --- |
| shlib/Makefile.in |
| - made the suffix rule that creates xx.so from xx.c write the |
| compiler output to `a.o', which is then mv'd to xx.so, because |
| some compilers (Sun WSpro 4.2, for example) don't allow any |
| suffixes other than `.o' for `cc -c' (not even `a.out') |
| |
| 9/15 |
| ---- |
| |
| Makefile.in |
| - AR and ARFLAGS are now substituted by configure, used in recipes |
| that build the libraries |
| |
| configure.in |
| - use AC_CHECK_PROG to check for ar |
| - set ARFLAGS if it has not already been set in the environment |
| |
| 10/5 |
| ---- |
| Makefile.in |
| - removed savestring.o from object file list |
| |
| 10/28 |
| ----- |
| shlib/Makefile.in |
| - don't use a fixed filename in the .c.so suffix rule to avoid |
| problems with parallel makes |
| |
| 12/21 |
| ----- |
| support/shlib-install |
| - new script to install shared readline and history libraries |
| |
| shlib/Makefile.in |
| - changed to call shlib-install for install and uninstall targets |
| |
| [readline-4.0-beta1 frozen] |
| |
| 12/22 |
| ----- |
| configure.in |
| - call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS |
| |
| shlib/Makefile.in |
| - SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure |
| - add $(SHLIB_LIBS) at end of command line that builds the shared |
| libraries (currently needed only by AIX 4.2) |
| |
| 12/31 |
| ----- |
| MANIFEST, MANIFEST.doc |
| - the TOC html files are no longer generated and no longer part of |
| the distribution |
| |
| 2/18/1999 |
| --------- |
| configure.in |
| - set MAKE_SHELL to /bin/sh and substitute into the Makefiles |
| |
| Makefile.in,{doc,examples,shlib}/Makefile.in |
| - set SHELL from @MAKE_SHELL@ |
| |
| [readline-4.0 released] |
| |
| 3/11 |
| ---- |
| doc/Makefile.in |
| - removed references to HTMLTOC, since separate HTML table-of-contents |
| files are no longer created |
| |
| examples/Makefile.in |
| - remove `*.exe' in clean target for MS-DOS |
| |
| Makefile.in |
| - make `readline' target depend on ./libreadline.a |
| - configure now substitutes TERMCAP_LIB into Makefile.in |
| - use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline' |
| - clean target now removes readline and readline.exe in case they |
| get built |
| |
| configure.in |
| - use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP |
| |
| 3/15 |
| ---- |
| support/shlib-install |
| - Irix 5.x and Irix 6.x should install shared libraries like Solaris 2 |
| - changes for installing on hp-ux 1[01].x |
| |
| 3/23 |
| ---- |
| configure.in |
| - make sure that the $CC argument to shobj-conf is quoted |
| |
| 4/8 |
| --- |
| |
| xmalloc.h, rlprivate.h, rlshell.h |
| - new files |
| |
| Makefile.in,shlib/Makefile.in |
| - add dependencies on xmalloc.h, rlshell.h |
| - add xmalloc.h, rlprivate.h, rlshell.h to list of header files |
| |
| MANIFEST |
| - add xmalloc.h, rlprivate.h, rlshell.h |
| |
| 4/9 |
| --- |
| Makefile.in,shlib/Makefile.in |
| - add dependencies on rlprivate.h |
| |
| 4/13 |
| ---- |
| doc/Makefile.in |
| - add variable, PSDVI, which is the desired resolution of the |
| generated postscript files. Set to 300 because I don't have |
| any 600-dpi printers |
| - set LANGUAGE= before calling makeinfo, so messages are in English |
| - add rluserman.{info,dvi,ps,html} to appropriate variables |
| - add rules to create rluserman.{info,dvi,ps,html} |
| - install and uninstall rluserman.info, but don't update the directory |
| file in $(infodir) yet |
| |
| MANIFEST |
| - add doc/rluserman.{texinfo,info,dvi,ps,html} |
| |
| 4/30 |
| ---- |
| configure.in |
| - updated library version to 4.1 |
| |
| 5/3 |
| --- |
| configure.in |
| - SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are |
| constructed from $LIBRARY_VERSION and substituted into Makefiles |
| |
| 5/5 |
| --- |
| support/shlib-install |
| - OSF/1 installs shared libraries like Solaris |
| |
| Makefile.in |
| - broke the header file install and uninstall into two new targets: |
| install-headers and uninstall-headers |
| - install and uninstall depend on install-headers and uninstall-headers |
| respectively |
| - changed install-shared and uninstall-shared targets to depend on |
| install-headers and uninstall-headers, respectively, so users may |
| choose to install only the shared libraries. I'm not sure about |
| the uninstall one yet -- maybe it should check whether or not |
| the static libraries are installed and not remove the header files |
| if they are |
| |
| 9/3 |
| --- |
| configure.in, config.h.in |
| - added test for memmove (for later use) |
| - changed version to 4.1-beta1 |
| |
| 9/13 |
| ---- |
| examples/rlfe.c |
| - Per Bothner's `rlfe' readline front-end program |
| |
| examples/Makefile.in |
| - added rules to build rlfe |
| |
| 9/21 |
| ---- |
| support/shlib-install |
| - changes to handle FreeBSD-3.x elf or a.out shared libraries, which |
| have different semantics and need different naming conventions |
| |
| 1/24/2000 |
| --------- |
| doc/Makefile.in |
| - remove *.bt and *.bts on `make clean' |
| |
| 2/4 |
| --- |
| |
| |
| configure.in |
| - changed LIBVERSION to 4.1-beta5 |
| |
| 3/17/2000 |
| --------- |
| [readline-4.1 released] |
| |
| 3/23 |
| ---- |
| Makefile.in |
| - remove the `-t' argument to ranlib in the install recipe; some |
| ranlibs don't have it and attempt to create a file named `-t' |
| |
| 3/27 |
| ---- |
| support/shlib-install |
| - install shared libraries unwritable by anyone on HP-UX |
| - changed symlinks to relative pathnames on all platforms |
| |
| shlib/Makefile.in |
| - added missing `includedir' assignment, substituted by configure |
| |
| Makefile.in |
| - added missing @SET_MAKE@ so configure can set $MAKE appropriately |
| |
| configure.in |
| - add call to AC_PROG_MAKE_SET |
| |
| 8/30 |
| ---- |
| shlib/Makefile.in |
| - change the soname bound into the shared libraries, so it includes |
| only the major version number. If it includes the minor version, |
| programs depending on it must be rebuilt (which may or may not be |
| a bad thing) |
| |
| 9/6 |
| --- |
| examples/rlfe.c |
| - add -l option to log input and output (-a option appends to logfile) |
| - add -n option to set readline application name |
| - add -v, -h options for version and help information |
| - change a few things because getopt() is now used to parse arguments |
| |
| 9/12 |
| ---- |
| support/shlib-install |
| - fix up the libname on HPUX 11 |
| |
| 10/18 |
| ----- |
| configure.in |
| - changed library version to 4.2-alpha |
| |
| 10/30 |
| ----- |
| configure.in |
| - add -fsigned-char to LOCAL_CFLAGS for Linux running on the IBM |
| S/390 |
| |
| Makefile.in |
| - added new file, rltypedefs.h, installed by default with `make install' |
| |
| 11/2 |
| ---- |
| compat.c |
| - new file, with backwards-compatibility function definitions |
| |
| Makefile.in,shlib/Makefile.in |
| - make sure that compat.o/compat.so are built and linked apppropriately |
| |
| support/shobj-conf |
| - picked up bash version, which means that shared libs built on |
| linux and BSD/OS 4.x will have an soname that does not include |
| the minor version number |
| |
| 11/13 |
| ----- |
| examples/rlfe.c |
| - rlfe can perform filename completion for relative pathnames in the |
| inferior process's context if the OS supports /proc/PID/cwd (linux |
| does it OK, Solaris is slightly warped, none of the BSDs have it) |
| |
| 11/17/2000 |
| ---------- |
| [readline-4.2-alpha released] |
| |
| 11/27 |
| ----- |
| Makefile.in,shlib/Makefile.in |
| - added dependencies for rltypedefs.h |
| |
| shlib/Makefile.in |
| - changed dependencies on histlib.h to $(topdir)/histlib.h |
| |
| 1/22 |
| ---- |
| configure.in |
| - changed release version to 4.2-beta |
| |
| 2/2 |
| --- |
| examples/Makefile.in |
| - build histexamp as part of the examples |
| |
| 2/5 |
| --- |
| doc/Makefile.in |
| - don't remove the dvi, postscript, html, info, and text `objects' |
| on a `make distclean', only on a `make maintainer-clean' |
| |
| 3/6 |
| --- |
| doc/history.{0,3}, doc/history_3.ps |
| - new manual page for history library |
| |
| doc/Makefile.in |
| - rules to install and uninstall history.3 in ${man3dir} |
| - rules to build history.0 and history_3.ps |
| |
| 4/2 |
| --- |
| configure.in |
| - changed LIBVERSION to `4.2' |
| |
| 4/5 |
| --- |
| [readline-4.2 frozen] |
| |
| 4/9 |
| --- |
| [readline-4.2 released] |
| |
| 5/2 |
| --- |
| Makefile.in,{doc,examples,shlib}/Makefile.in |
| - added support for DESTDIR installation root prefix, to support |
| building packages |
| |
| doc/Makefile.in |
| - add an info `dir' file entry for rluserman.info on `make install' |
| - change man1ext to `.1' and man3ext to `.3' |
| - install man pages with a $(man3ext) extension in the target directory |
| - add support for installing html documentation if `htmldir' has a |
| value |
| |
| Makefile.in |
| - on `make install', install from the `shlib' directory, too |
| - on `make uninstall', uninstall in the `doc' and `shlib' |
| subdirectories, too |
| |
| support/shlib-install |
| - add `freebsdelf*', `freebsdaout*', Hurd, `sysv4*', `sysv5*', `dgux*' |
| targets for symlink creation |
| |
| 5/7 |
| --- |
| configure.in, config.h.in |
| - check for <limits.h>, define HAVE_LIMITS_H if found |
| |
| 5/8 |
| --- |
| aclocal.m4 |
| - pick up change to BASH_CHECK_LIB_TERMCAP that adds check for |
| libtinfo (termcap-specific portion of ncurses-5.2) |
| |
| 5/9 |
| --- |
| configure.in |
| - call AC_C_CONST to find out whether or not the compiler supports |
| `const' |
| |
| config.h.in |
| - placeholder for `const' define, if any |
| |
| 5/10 |
| ---- |
| configure.in |
| - fix AC_CHECK_PROG(ar, ...) test to specify right value for the |
| case where ar is not found; should produce a better error message |
| |
| 5/14 |
| ---- |
| configure.in,config.h.in |
| - check for vsnprintf, define HAVE_VSNPRINTF if found |
| |
| 5/21 |
| ---- |
| configure.in, config.h.in |
| - add checks for size_t, ssize_t |
| |
| 5/30 |
| ---- |
| configure.in |
| - update autoconf to version 2.50, use in AC_PREREQ |
| - changed AC_INIT to new flavor |
| - added AC_CONFIG_SRCDIR |
| - AC_CONFIG_HEADER -> AC_CONFIG_HEADERS |
| - call AC_C_PROTOTYPES |
| - AC_RETSIGTYPE -> AC_TYPE_SIGNAL |
| |
| 8/22 |
| ---- |
| configure.in |
| - updated the version number to 4.2a |
| |
| Makefile.in,shlib/Makefile.in |
| - make sure tilde.o is built -DREADLINE_LIBRARY when being built as |
| part of the standalone library, so it picks up the right include |
| files |
| |
| 8/23 |
| ---- |
| support/shlib-install |
| - support for Darwin/MacOS X shared library installation |
| |
| 9/24 |
| ---- |
| examples/readlinebuf.h |
| - a new file, a C++ streambuf interface that uses readline for I/O. |
| Donated by Dimitris Vyzovitis <vyzo@media.mit.edu> |
| |
| 10/9 |
| ---- |
| configure.in |
| - replaced call to BASH_HAVE_TIOCGWINSZ with AC_HEADER_TIOCGWINSZ |
| |
| [readline-4.2a-beta1 frozen] |
| |
| 10/15 |
| ----- |
| configure.in, config.h.in |
| - check for <memory.h>, define HAVE_MEMORY_H if found |
| - check for <strings.h>, define HAVE_STRINGS_H if found |
| |
| 10/18 |
| ----- |
| configure.in, config.h.in |
| - check for isascii, define HAVE_ISASCII if found |
| |
| configure.in |
| - changed the macro names from bash as appropriate: |
| BASH_SIGNAL_CHECK -> BASH_SYS_SIGNAL_VINTAGE |
| BASH_REINSTALL_SIGHANDLERS -> BASH_SYS_REINSTALL_SIGHANDLERS |
| BASH_MISC_SPEED_T -> BASH_CHECK_SPEED_T |
| |
| 10/22 |
| ----- |
| configure.in |
| - check for isxdigit with AC_CHECK_FUNCS |
| |
| config.h.in |
| - new define for HAVE_ISXDIGIT |
| |
| 10/29 |
| ----- |
| configure.in, config.h.in |
| - check for strpbrk with AC_CHECK_FUNCS, define HAVE_STRPBRK if found |
| |
| 11/1 |
| ---- |
| Makefile.in |
| - make sure DESTDIR is passed to install and uninstall makes in |
| subdirectories |
| - when saving old copies of installed libraries, make sure we use |
| DESTDIR for the old installation tree |
| |
| [readline-4.2a-rc1 frozen] |
| |
| 11/2 |
| ---- |
| Makefile.in, shlib/Makefile.in |
| - don't put -I$(includedir) into CFLAGS |
| |
| 11/15 |
| ----- |
| [readline-4.2a released] |
| |
| 11/20 |
| ----- |
| examples/rlcat.c |
| - new file |
| |
| examples/Makefile.in |
| - changes for rlcat |
| |
| 11/28 |
| ----- |
| configure.in |
| - default TERMCAP_LIB to -lcurses if $prefer_curses == yes (as when |
| --with-curses is supplied) |
| |
| examples/Makefile.in |
| - substitute @LDFLAGS@ in LDFLAGS assignment |
| |
| 11/29 |
| ----- |
| config.h.in |
| - add necessary defines for multibyte include files and functions |
| - add code to define HANDLE_MULTIBYTE if prerequisites are met |
| |
| configure.in |
| - call BASH_CHECK_MULTIBYTE |
| |
| 12/14 |
| ----- |
| config.h.in |
| - add #undef PROTOTYPES, filled in by AC_C_PROTOTYPES |
| |
| 12/17 |
| ----- |
| config.h.in |
| - moved HANDLE_MULTIBYTE code to rlmbutil.h |
| |
| rlmbutil.h, mbutil.c |
| - new files |
| |
| Makefile.in, shlib/Makefile.in |
| - added rules for mbutil.c |
| |
| 12/20 |
| ----- |
| configure.in |
| - added --enable-shared, --enable-static options to configure to |
| say which libraries are built by default (both default to yes) |
| - if SHLIB_STATUS == 'unsupported', turn off default shared library |
| building |
| - substitute new STATIC_TARGET, SHARED_TARGET, STATIC_INSTALL_TARGET, |
| and SHARED_INSTALL_TARGET |
| |
| Makefile.in |
| - `all' target now depends on (substituted) @STATIC_TARGET@ and |
| @SHARED_TARGET@ |
| - `install' target now depends on (substituted) @STATIC_INSTALL_TARGET@ |
| and @SHARED_INSTALL_TARGET@ |
| |
| INSTALL, README |
| - updated with new info about --enable-shared and --enable-static |
| |
| 1/10/2002 |
| --------- |
| configure.in |
| - bumped the library version number to 4.3 |
| |
| 1/24 |
| ---- |
| Makefile.in,shlib/Makefile.in |
| - changes for new file, text.c, with character and text handling |
| functions from readline.c |
| |
| 2/20 |
| ---- |
| {configure.config.h}.in |
| - call AC_C_CHAR_UNSIGNED, define __CHAR_UNSIGNED__ if chars are |
| unsigned by default |
| |
| 5/20 |
| ---- |
| doc/Makefile.in |
| - new maybe-clean target that removes the generated documentation if |
| the build directory differs from the source directory |
| - distclean target now depends on maybe-clean |
| |
| 7/17 |
| ---- |
| [readline-4.3 released] |
| |
| 7/18 |
| ---- |
| shlib/Makefile.in |
| - fix bad dependency: text.so: terminal.c, make it depend on text.c |
| |
| 8/7 |
| --- |
| support/shlib-install |
| - break `linux' out into its own stanza: it seems that linux |
| distributions are all moving to the following scheme: |
| |
| libreadline.so.4.3 installed version |
| libreadline.so.4 -> libreadline.so.4.3 symlink |
| libreadline.so -> libreadline.so.4 symlink |
| |
| 10/29 |
| ----- |
| support/shlib-install |
| - change INSTALL_LINK[12] to use `&&' instead of `;' so it only |
| tries the link if the cd succeeds; put ${echo} in there, too |
| - use $LN instead of `ln -s' so it works on machines without symlinks |
| - change special linux stanza to use cd before ln also |
| - change to use $INSTALL_LINK1 and $INSTALL_LINK2 appropriately |
| instead of explicit commands in various stanzas |
| |
| 2/1 |
| --- |
| config.h.in |
| - add HAVE_MBRTOWC and HAVE_MBRLEN |
| - add NO_MULTIBYTE_SUPPORT for new configure argument |
| - add STDC_HEADERS |
| |
| configure.in |
| - new argument --enable-multibyte (enabled by default), allows |
| multibyte support to be turned off even on systems that support it |
| - add check for ansi stdc headers with call to AC_HEADER_STDC |
| |
| 2/3 |
| --- |
| configure.in |
| - add call to BASH_FUNC_CTYPE_NONASCII |
| |
| config.h.in |
| - add CTYPE_NON_ASCII |
| |
| 2/20 |
| ---- |
| |
| doc/manvers.texinfo |
| - renamed to version.texi to match other GNU software |
| - UPDATE-MONTH variable is now `UPDATED-MONTH' |
| |
| doc/{hist,rlman,rluserman}.texinfo |
| - include version.texi |
| |
| doc/{rltech,rluser,hstech,hsuser}.texi |
| - changed the suffix from `texinfo' to `texi' |
| |
| doc/Makefile.in |
| - made appropriate changes for {{rl,hs}tech,{rl,hs}user}.texi |
| |
| doc/{rlman,rluserman}.texinfo |
| - changed the suffix from `texinfo' to `texi' |
| |
| doc/hist.texinfo |
| - renamed to history.texi to be more consistent |
| |
| 6/11 |
| ---- |
| shlib/Makefile.in |
| - have configure substitute value of `@LDFLAGS@' into the assignment |
| to SHLIB_XLDFLAGS |
| |
| 6/16 |
| ---- |
| configure.in |
| - readline and history libraries are now at version 5.0 |
| |
| 8/18 |
| ---- |
| support/shlib-install |
| - support for FreeBSD-gnu (from Robert Millan) |
| |
| 12/4 |
| ---- |
| Makefile.in |
| - add variables for localedir and the PACKAGE_* variables, auto-set |
| by configure |
| |
| 12/9 |
| ---- |
| Makefile.in |
| - use mkinstalldirs instead of mkdirs |
| |
| 4/22 |
| ---- |
| Makefile.in |
| - separate doc install/uninstall out into two new targets: |
| install-doc and uninstall-doc |
| - make install-doc and uninstall-doc prerequisites of appropriate |
| install and uninstall targets |
| |
| examples/rl-fgets.c |
| - new example from Harold Levy that wraps fgets replacement functions |
| that call readline in a shared library that can be interposed with |
| LD_PRELOAD |
| |
| 7/27 |
| ---- |
| [readline-5.0 released] |
| |
| 11/15 |
| ----- |
| examples/rlfe/{ChangeLog,Makefile.in,README,config.h.in,configure,configure.in,extern.h,os.h,pty.c,rlfe.c,screen.h} |
| - new version of rlfe, rlfe-0.4, from Per Bothner; now a standalone |
| application |
| |
| 11/16 |
| ----- |
| shlib/Makefile.in |
| - substitute TERMCAP_LIB in from configure |
| |
| configure.in |
| - if SHLIB_LIBS doesn't include a termcap library (curses, ncurses, |
| termcap, termlib), append the value of $TERMCAP_LIB to it |
| |
| 11/30 |
| ----- |
| configure.in |
| - take out change from 11/16; it doesn't work for some systems (e.g., |
| SunOS 4.x and Solaris 2.6) |
| - add support for --enable-purify configure argument |
| - pass TERMCAP_LIB in environment when calling shobj-conf |
| |
| examples/Makefile.in |
| - add support for building examples with purify |
| |
| 1/23/2005 |
| --------- |
| configure.in |
| - set BUILD_DIR to contain backslashes to escape any spaces in the |
| directory name -- this is what make will accept in targets and |
| prerequisites, so it's better than trying to use double quotes |
| |
| 2/25 |
| ---- |
| configure.in |
| - change check for sys/ptem.h to include sys/stream.h if present, to |
| avoid the `present but cannot be compiled' messages on Solaris and |
| SVR4.2 (does anyone still use SVR4.2?) |
| |
| 5/7 |
| --- |
| configure.in |
| - add cross-compiling support from the bash configure.in, which cygwin |
| and mingw have apparently adopted |
| - add check for pwd.h, fcntl.h |
| - add checks for fcntl, kill system calls |
| - add checks for getpw{ent,nam,uid} C library functions |
| - pass a compile-time option through to Makefiles if cross-compiling |
| |
| config.h.in |
| - add HAVE_PWD_H for <pwd.h>, HAVE_FCNTL_H for <fcntl.h> |
| - add HAVE_FCNTL, HAVE_KILL for respective system calls |
| - add HAVE_GETPW{ENT,NAM,UID} for passwd functions |
| |
| Makefile.in,shlib/Makefile.in |
| - @CROSS_COMPILE@ is substituted into DEFS (equal to -DCROSS_COMPILING |
| if bash is being cross-compiled) |
| |
| 8/2 |
| --- |
| examples/Makefile.in |
| - use $(READLINE_LIB) instead of -lreadline to get around MacOS X 10.4's |
| preference for (incompatible) shared libraries over static libraries |
| in the load path |
| |
| 8/11 |
| ---- |
| support/shobj-conf |
| - new variable: SHLIB_LIBPREF, prefix for shared library name (defaults |
| to `lib' |
| - new variable: SHLIB_DLLVERSION, used on Cygwin to set the library |
| version number |
| - new variable: SHLIB_DOT, separator character between library name and |
| suffix and version information (defaults to `.') |
| - new stanza for cygwin to generate windows-compatible dll |
| |
| support/shlib-install |
| - add new option `-b bindir' for systems like cygwin/windows that |
| require it |
| - new stanza for cygwin that installs a dll into $bindir and an implied |
| link library into $libdir |
| |
| configure.in |
| - substitute new variables from shobj-conf |
| |
| shlib/Makefile.in |
| - substitute bindir, SHLIB_DOT, SHLIB_LIBPREF, SHLIB_DLLVERSION from |
| configure |
| - pass `-b $(bindir)' to shlib-install for install and uninstall targets |
| - library names now use $SHLIB_LIBPREF and $SHLIB_DOT |
| |
| INSTALL,README |
| - document new SHLIB_DOT, SHLIB_LIBPREF, and SHLIB_DLLVERSION variables |
| |
| 10/4 |
| ---- |
| [readline-5.1-beta1 frozen] |
| |
| 12/1 |
| ---- |
| configure.in |
| - changed release status to `release' |
| |
| [readline-5.1 frozen] |
| |
| 12/9 |
| ---- |
| [readline-5.1 released] |
| |
| 12/14 |
| ----- |
| examples/rlfe/Makefile.in |
| - add @LIBS@ to LIBS assignment to pick up extra libraries from |
| configure |
| |
| 1/3/2006 |
| -------- |
| support/shlib-install |
| - Install shared libraries with execute bit set on Linux |
| |
| 6/9 |
| --- |
| [readline-5.2-alpha frozen] |
| |
| 6/26 |
| ---- |
| configure.in |
| - set CROSS_COMPILE to the empty string by default, so we don't inherit |
| a random value from the environment |
| |
| 7/8 |
| --- |
| [readline-5.2-alpha released] |
| |
| |
| [readline-5.2-beta released] |
| |
| 9/12 |
| ---- |
| config.h.in |
| - add defines for wcscoll, iswctype, iswupper, iswlower, towupper, |
| towlower functions |
| - replace define for wctomb with one for wcrtomb |
| - add defines for wchar_t, wint_t, wctype_t types |
| |
| 10/11 |
| ----- |
| [readline-5.2 released] |
| |
| 11/9 |
| ---- |
| examples/rlfe/{configure.in,Makefile.in,config.h.in,rlfe.c,pty.c} |
| - portability fixes from Mike Frysinger <vapier@gentoo.org> |
| |
| 11/21 |
| ----- |
| Makefile.in |
| - add `install-examples' and `uninstall-examples' targets |
| |
| examples/Makefile.in |
| - add correct variables to build examples on Windows |
| - add appropriate rules to install and uninstall example sources in |
| $(datadir)/readline |
| |
| 11/27 |
| ----- |
| config.h.in |
| - move #undef of HAVE_STRCOLL out of config.h.in, since autoconf tries |
| to substitute it based on configure tests |
| |
| 4/27/2007 |
| --------- |
| examples/autoconf |
| - new directory with example autoconf macros to detect readline and |
| return information about the installed version |
| |
| 6/13 |
| ---- |
| support/shlib-install |
| - changes to support AIX 5.x shared library installation |
| |
| 3/20/2008 |
| --------- |
| support/shlib-install |
| - add support for NetBSD and Interix shared library installation |
| |
| 4/22 |
| ---- |
| support/wcwidth.c |
| - updated implementation from 2007-05 |
| |
| 7/18 |
| ---- |
| support/shlib-install |
| - support for mingw32, contributed by Carlo Bramix <carlo.bramix@libero.it> |
| |
| 8/4 |
| --- |
| configure.in |
| - changed to readline-6.0 |
| |
| 8/18 |
| ---- |
| support/config.{guess,sub} |
| - updated to newer versions from autoconf-2.62 distribution |
| |
| 3/5/2009 |
| -------- |
| support/shlib-install |
| - take a new -V host_vendor argument |
| - add ${host_vendor} to string tested in case statement for symlink |
| creation section |
| - add support for FreeBSD/gentoo, which uses Linux library naming |
| scheme |
| - change FreeBSD symlink rules, since FreeBSD 7+ has only ELF shared |
| libraries. DragonflyBSD rules are the same. Fix from Timothy |
| Redaelli <drizzt@gentoo.org> |
| |
| shlib/Makefile.in |
| - add definition of host_vendor, substituted by configure |
| - add -V host_vendor argument to all invocations of shlib-install. |
| Fix from Timothy Redaelli <drizzt@gentoo.org> |
| |
| 3/10 |
| ---- |
| configure.in |
| - add call to AC_SYS_LARGEFILE for readdir and largefile support on |
| Linux |
| |
| config.h.in |
| - add _FILE_OFFSET_BITS define |
| |
| 4/19 |
| ---- |
| Makefile.in |
| - add targets for making and installing documentation required by GNU |
| coding standards. Fix from Joseph Myers <joseph@codesourcery.com> |
| |
| posixselect.h |
| - pick up from bash. Inspired by Mike Frysinger <vapier@gentoo.org> |
| |
| 10/28 |
| ----- |
| support/shlib-install |
| - decrease the default version of FreeBSD that installs shared libraries |
| to 4.x. Advice from Peter Jeremy <peterjeremy@acm.org> |
| |
| 12/18 |
| ----- |
| [readline-6.1-rc1 released] |
| |
| 12/23 |
| ----- |
| doc/Makefile.in |
| - make sure $(topdir) is not ".." before removing all of the formatted |
| documentation in `make distclean'. $(topdir) is set to `..' if |
| readline is being built in the source directory. Fixes problem |
| noticed by THOUMIN Damien <thoumin@ipanematech.com> |
| |
| 12/29 |
| ----- |
| [readline-6.1 frozen] |
| |
| 2/5/2010 |
| -------- |
| examples/Makefile.in |
| - make sure to install example C files using $(srcdir)/$$f in case |
| we're building outside the source directory. Bug report and fix |
| from Peter Breitenlohner <peb@mppmu.mpg.de> |
| |
| 7/25 |
| ---- |
| xfree.c |
| - new file with xfree() implementation, moved from xmalloc.c |
| |
| 12/28 |
| ----- |
| {examples,shlib}/Makefile.in |
| - Cygwin-based changes from Eric Blake <eblake@redhat.com> |