| /**************************************************************************** |
| * |
| * ttsbit.c |
| * |
| * TrueType and OpenType embedded bitmap support (body). |
| * |
| * Copyright (C) 2005-2020 by |
| * David Turner, Robert Wilhelm, and Werner Lemberg. |
| * |
| * Copyright 2013 by Google, Inc. |
| * Google Author(s): Behdad Esfahbod. |
| * |
| * This file is part of the FreeType project, and may only be used, |
| * modified, and distributed under the terms of the FreeType project |
| * license, LICENSE.TXT. By continuing to use, modify, or distribute |
| * this file you indicate that you have read the license and |
| * understand and accept it fully. |
| * |
| */ |
| |
| |
| #include <freetype/internal/ftdebug.h> |
| #include <freetype/internal/ftstream.h> |
| #include <freetype/tttags.h> |
| #include <freetype/ftbitmap.h> |
| |
| |
| #ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS |
| |
| #include "ttsbit.h" |
| |
| #include "sferrors.h" |
| |
| #include "ttmtx.h" |
| #include "pngshim.h" |
| |
| |
| /************************************************************************** |
| * |
| * The macro FT_COMPONENT is used in trace mode. It is an implicit |
| * parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log |
| * messages during execution. |
| */ |
| #undef FT_COMPONENT |
| #define FT_COMPONENT ttsbit |
| |
| |
| FT_LOCAL_DEF( FT_Error ) |
| tt_face_load_sbit( TT_Face face, |
| FT_Stream stream ) |
| { |
| FT_Error error; |
| FT_ULong table_size; |
| FT_ULong table_start; |
| |
| |
| face->sbit_table = NULL; |
| face->sbit_table_size = 0; |
| face->sbit_table_type = TT_SBIT_TABLE_TYPE_NONE; |
| face->sbit_num_strikes = 0; |
| |
| error = face->goto_table( face, TTAG_CBLC, stream, &table_size ); |
| if ( !error ) |
| face->sbit_table_type = TT_SBIT_TABLE_TYPE_CBLC; |
| else |
| { |
| error = face->goto_table( face, TTAG_EBLC, stream, &table_size ); |
| if ( error ) |
| error = face->goto_table( face, TTAG_bloc, stream, &table_size ); |
| if ( !error ) |
| face->sbit_table_type = TT_SBIT_TABLE_TYPE_EBLC; |
| } |
| |
| if ( error ) |
| { |
| error = face->goto_table( face, TTAG_sbix, stream, &table_size ); |
| if ( !error ) |
| face->sbit_table_type = TT_SBIT_TABLE_TYPE_SBIX; |
| } |
| if ( error ) |
| goto Exit; |
| |
| if ( table_size < 8 ) |
| { |
| FT_ERROR(( "tt_face_load_sbit_strikes: table too short\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| table_start = FT_STREAM_POS(); |
| |
| switch ( (FT_UInt)face->sbit_table_type ) |
| { |
| case TT_SBIT_TABLE_TYPE_EBLC: |
| case TT_SBIT_TABLE_TYPE_CBLC: |
| { |
| FT_Byte* p; |
| FT_Fixed version; |
| FT_ULong num_strikes; |
| FT_UInt count; |
| |
| |
| if ( FT_FRAME_EXTRACT( table_size, face->sbit_table ) ) |
| goto Exit; |
| |
| face->sbit_table_size = table_size; |
| |
| p = face->sbit_table; |
| |
| version = FT_NEXT_LONG( p ); |
| num_strikes = FT_NEXT_ULONG( p ); |
| |
| /* there's at least one font (FZShuSong-Z01, version 3) */ |
| /* that uses the wrong byte order for the `version' field */ |
| if ( ( (FT_ULong)version & 0xFFFF0000UL ) != 0x00020000UL && |
| ( (FT_ULong)version & 0x0000FFFFUL ) != 0x00000200UL && |
| ( (FT_ULong)version & 0xFFFF0000UL ) != 0x00030000UL && |
| ( (FT_ULong)version & 0x0000FFFFUL ) != 0x00000300UL ) |
| { |
| error = FT_THROW( Unknown_File_Format ); |
| goto Exit; |
| } |
| |
| if ( num_strikes >= 0x10000UL ) |
| { |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| /* |
| * Count the number of strikes available in the table. We are a bit |
| * paranoid there and don't trust the data. |
| */ |
| count = (FT_UInt)num_strikes; |
| if ( 8 + 48UL * count > table_size ) |
| count = (FT_UInt)( ( table_size - 8 ) / 48 ); |
| |
| face->sbit_num_strikes = count; |
| } |
| break; |
| |
| case TT_SBIT_TABLE_TYPE_SBIX: |
| { |
| FT_UShort version; |
| FT_UShort flags; |
| FT_ULong num_strikes; |
| FT_UInt count; |
| |
| |
| if ( FT_FRAME_ENTER( 8 ) ) |
| goto Exit; |
| |
| version = FT_GET_USHORT(); |
| flags = FT_GET_USHORT(); |
| num_strikes = FT_GET_ULONG(); |
| |
| FT_FRAME_EXIT(); |
| |
| if ( version < 1 ) |
| { |
| error = FT_THROW( Unknown_File_Format ); |
| goto Exit; |
| } |
| |
| /* Bit 0 must always be `1'. */ |
| /* Bit 1 controls the overlay of bitmaps with outlines. */ |
| /* All other bits should be zero. */ |
| if ( !( flags == 1 || flags == 3 ) || |
| num_strikes >= 0x10000UL ) |
| { |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| /* we currently don't support bit 1; however, it is better to */ |
| /* draw at least something... */ |
| if ( flags == 3 ) |
| FT_TRACE1(( "tt_face_load_sbit_strikes:" |
| " sbix overlay not supported yet\n" |
| " " |
| " expect bad rendering results\n" )); |
| |
| /* |
| * Count the number of strikes available in the table. We are a bit |
| * paranoid there and don't trust the data. |
| */ |
| count = (FT_UInt)num_strikes; |
| if ( 8 + 4UL * count > table_size ) |
| count = (FT_UInt)( ( table_size - 8 ) / 4 ); |
| |
| if ( FT_STREAM_SEEK( FT_STREAM_POS() - 8 ) ) |
| goto Exit; |
| |
| face->sbit_table_size = 8 + count * 4; |
| if ( FT_FRAME_EXTRACT( face->sbit_table_size, face->sbit_table ) ) |
| goto Exit; |
| |
| face->sbit_num_strikes = count; |
| } |
| break; |
| |
| default: |
| /* we ignore unknown table formats */ |
| error = FT_THROW( Unknown_File_Format ); |
| break; |
| } |
| |
| if ( !error ) |
| FT_TRACE3(( "tt_face_load_sbit_strikes: found %u strikes\n", |
| face->sbit_num_strikes )); |
| |
| face->ebdt_start = 0; |
| face->ebdt_size = 0; |
| |
| if ( face->sbit_table_type == TT_SBIT_TABLE_TYPE_SBIX ) |
| { |
| /* the `sbix' table is self-contained; */ |
| /* it has no associated data table */ |
| face->ebdt_start = table_start; |
| face->ebdt_size = table_size; |
| } |
| else if ( face->sbit_table_type != TT_SBIT_TABLE_TYPE_NONE ) |
| { |
| FT_ULong ebdt_size; |
| |
| |
| error = face->goto_table( face, TTAG_CBDT, stream, &ebdt_size ); |
| if ( error ) |
| error = face->goto_table( face, TTAG_EBDT, stream, &ebdt_size ); |
| if ( error ) |
| error = face->goto_table( face, TTAG_bdat, stream, &ebdt_size ); |
| |
| if ( !error ) |
| { |
| face->ebdt_start = FT_STREAM_POS(); |
| face->ebdt_size = ebdt_size; |
| } |
| } |
| |
| if ( !face->ebdt_size ) |
| { |
| FT_TRACE2(( "tt_face_load_sbit_strikes:" |
| " no embedded bitmap data table found;\n" |
| " " |
| " resetting number of strikes to zero\n" )); |
| face->sbit_num_strikes = 0; |
| } |
| |
| return FT_Err_Ok; |
| |
| Exit: |
| if ( error ) |
| { |
| if ( face->sbit_table ) |
| FT_FRAME_RELEASE( face->sbit_table ); |
| face->sbit_table_size = 0; |
| face->sbit_table_type = TT_SBIT_TABLE_TYPE_NONE; |
| } |
| |
| return error; |
| } |
| |
| |
| FT_LOCAL_DEF( void ) |
| tt_face_free_sbit( TT_Face face ) |
| { |
| FT_Stream stream = face->root.stream; |
| |
| |
| FT_FRAME_RELEASE( face->sbit_table ); |
| face->sbit_table_size = 0; |
| face->sbit_table_type = TT_SBIT_TABLE_TYPE_NONE; |
| face->sbit_num_strikes = 0; |
| } |
| |
| |
| FT_LOCAL_DEF( FT_Error ) |
| tt_face_set_sbit_strike( TT_Face face, |
| FT_Size_Request req, |
| FT_ULong* astrike_index ) |
| { |
| return FT_Match_Size( (FT_Face)face, req, 0, astrike_index ); |
| } |
| |
| |
| FT_LOCAL_DEF( FT_Error ) |
| tt_face_load_strike_metrics( TT_Face face, |
| FT_ULong strike_index, |
| FT_Size_Metrics* metrics ) |
| { |
| /* we have to test for the existence of `sbit_strike_map' */ |
| /* because the function gets also used at the very beginning */ |
| /* to construct `sbit_strike_map' itself */ |
| if ( face->sbit_strike_map ) |
| { |
| if ( strike_index >= (FT_ULong)face->root.num_fixed_sizes ) |
| return FT_THROW( Invalid_Argument ); |
| |
| /* map to real index */ |
| strike_index = face->sbit_strike_map[strike_index]; |
| } |
| else |
| { |
| if ( strike_index >= (FT_ULong)face->sbit_num_strikes ) |
| return FT_THROW( Invalid_Argument ); |
| } |
| |
| switch ( (FT_UInt)face->sbit_table_type ) |
| { |
| case TT_SBIT_TABLE_TYPE_EBLC: |
| case TT_SBIT_TABLE_TYPE_CBLC: |
| { |
| FT_Byte* strike; |
| FT_Char max_before_bl; |
| FT_Char min_after_bl; |
| |
| |
| strike = face->sbit_table + 8 + strike_index * 48; |
| |
| metrics->x_ppem = (FT_UShort)strike[44]; |
| metrics->y_ppem = (FT_UShort)strike[45]; |
| |
| metrics->ascender = (FT_Char)strike[16] * 64; /* hori.ascender */ |
| metrics->descender = (FT_Char)strike[17] * 64; /* hori.descender */ |
| |
| /* Due to fuzzy wording in the EBLC documentation, we find both */ |
| /* positive and negative values for `descender'. Additionally, */ |
| /* many fonts have both `ascender' and `descender' set to zero */ |
| /* (which is definitely wrong). MS Windows simply ignores all */ |
| /* those values... For these reasons we apply some heuristics */ |
| /* to get a reasonable, non-zero value for the height. */ |
| |
| max_before_bl = (FT_Char)strike[24]; |
| min_after_bl = (FT_Char)strike[25]; |
| |
| if ( metrics->descender > 0 ) |
| { |
| /* compare sign of descender with `min_after_bl' */ |
| if ( min_after_bl < 0 ) |
| metrics->descender = -metrics->descender; |
| } |
| |
| else if ( metrics->descender == 0 ) |
| { |
| if ( metrics->ascender == 0 ) |
| { |
| FT_TRACE2(( "tt_face_load_strike_metrics:" |
| " sanitizing invalid ascender and descender\n" |
| " " |
| " values for strike %ld (%dppem, %dppem)\n", |
| strike_index, |
| metrics->x_ppem, metrics->y_ppem )); |
| |
| /* sanitize buggy ascender and descender values */ |
| if ( max_before_bl || min_after_bl ) |
| { |
| metrics->ascender = max_before_bl * 64; |
| metrics->descender = min_after_bl * 64; |
| } |
| else |
| { |
| metrics->ascender = metrics->y_ppem * 64; |
| metrics->descender = 0; |
| } |
| } |
| } |
| |
| #if 0 |
| else |
| ; /* if we have a negative descender, simply use it */ |
| #endif |
| |
| metrics->height = metrics->ascender - metrics->descender; |
| if ( metrics->height == 0 ) |
| { |
| FT_TRACE2(( "tt_face_load_strike_metrics:" |
| " sanitizing invalid height value\n" |
| " " |
| " for strike (%d, %d)\n", |
| metrics->x_ppem, metrics->y_ppem )); |
| metrics->height = metrics->y_ppem * 64; |
| metrics->descender = metrics->ascender - metrics->height; |
| } |
| |
| /* Is this correct? */ |
| metrics->max_advance = ( (FT_Char)strike[22] + /* min_origin_SB */ |
| strike[18] + /* max_width */ |
| (FT_Char)strike[23] /* min_advance_SB */ |
| ) * 64; |
| |
| /* set the scale values (in 16.16 units) so advances */ |
| /* from the hmtx and vmtx table are scaled correctly */ |
| metrics->x_scale = FT_MulDiv( metrics->x_ppem, |
| 64 * 0x10000, |
| face->header.Units_Per_EM ); |
| metrics->y_scale = FT_MulDiv( metrics->y_ppem, |
| 64 * 0x10000, |
| face->header.Units_Per_EM ); |
| |
| return FT_Err_Ok; |
| } |
| |
| case TT_SBIT_TABLE_TYPE_SBIX: |
| { |
| FT_Stream stream = face->root.stream; |
| FT_UInt offset; |
| FT_UShort upem, ppem, resolution; |
| TT_HoriHeader *hori; |
| FT_Pos ppem_; /* to reduce casts */ |
| |
| FT_Error error; |
| FT_Byte* p; |
| |
| |
| p = face->sbit_table + 8 + 4 * strike_index; |
| offset = FT_NEXT_ULONG( p ); |
| |
| if ( offset + 4 > face->ebdt_size ) |
| return FT_THROW( Invalid_File_Format ); |
| |
| if ( FT_STREAM_SEEK( face->ebdt_start + offset ) || |
| FT_FRAME_ENTER( 4 ) ) |
| return error; |
| |
| ppem = FT_GET_USHORT(); |
| resolution = FT_GET_USHORT(); |
| |
| FT_UNUSED( resolution ); /* What to do with this? */ |
| |
| FT_FRAME_EXIT(); |
| |
| upem = face->header.Units_Per_EM; |
| hori = &face->horizontal; |
| |
| metrics->x_ppem = ppem; |
| metrics->y_ppem = ppem; |
| |
| ppem_ = (FT_Pos)ppem; |
| |
| metrics->ascender = |
| FT_MulDiv( hori->Ascender, ppem_ * 64, upem ); |
| metrics->descender = |
| FT_MulDiv( hori->Descender, ppem_ * 64, upem ); |
| metrics->height = |
| FT_MulDiv( hori->Ascender - hori->Descender + hori->Line_Gap, |
| ppem_ * 64, upem ); |
| metrics->max_advance = |
| FT_MulDiv( hori->advance_Width_Max, ppem_ * 64, upem ); |
| |
| /* set the scale values (in 16.16 units) so advances */ |
| /* from the hmtx and vmtx table are scaled correctly */ |
| metrics->x_scale = FT_MulDiv( metrics->x_ppem, |
| 64 * 0x10000, |
| face->header.Units_Per_EM ); |
| metrics->y_scale = FT_MulDiv( metrics->y_ppem, |
| 64 * 0x10000, |
| face->header.Units_Per_EM ); |
| |
| return error; |
| } |
| |
| default: |
| return FT_THROW( Unknown_File_Format ); |
| } |
| } |
| |
| |
| typedef struct TT_SBitDecoderRec_ |
| { |
| TT_Face face; |
| FT_Stream stream; |
| FT_Bitmap* bitmap; |
| TT_SBit_Metrics metrics; |
| FT_Bool metrics_loaded; |
| FT_Bool bitmap_allocated; |
| FT_Byte bit_depth; |
| |
| FT_ULong ebdt_start; |
| FT_ULong ebdt_size; |
| |
| FT_ULong strike_index_array; |
| FT_ULong strike_index_count; |
| FT_Byte* eblc_base; |
| FT_Byte* eblc_limit; |
| |
| } TT_SBitDecoderRec, *TT_SBitDecoder; |
| |
| |
| static FT_Error |
| tt_sbit_decoder_init( TT_SBitDecoder decoder, |
| TT_Face face, |
| FT_ULong strike_index, |
| TT_SBit_MetricsRec* metrics ) |
| { |
| FT_Error error = FT_ERR( Table_Missing ); |
| FT_Stream stream = face->root.stream; |
| |
| |
| strike_index = face->sbit_strike_map[strike_index]; |
| |
| if ( !face->ebdt_size ) |
| goto Exit; |
| if ( FT_STREAM_SEEK( face->ebdt_start ) ) |
| goto Exit; |
| |
| decoder->face = face; |
| decoder->stream = stream; |
| decoder->bitmap = &face->root.glyph->bitmap; |
| decoder->metrics = metrics; |
| |
| decoder->metrics_loaded = 0; |
| decoder->bitmap_allocated = 0; |
| |
| decoder->ebdt_start = face->ebdt_start; |
| decoder->ebdt_size = face->ebdt_size; |
| |
| decoder->eblc_base = face->sbit_table; |
| decoder->eblc_limit = face->sbit_table + face->sbit_table_size; |
| |
| /* now find the strike corresponding to the index */ |
| { |
| FT_Byte* p; |
| |
| |
| if ( 8 + 48 * strike_index + 3 * 4 + 34 + 1 > face->sbit_table_size ) |
| { |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| p = decoder->eblc_base + 8 + 48 * strike_index; |
| |
| decoder->strike_index_array = FT_NEXT_ULONG( p ); |
| p += 4; |
| decoder->strike_index_count = FT_NEXT_ULONG( p ); |
| p += 34; |
| decoder->bit_depth = *p; |
| |
| /* decoder->strike_index_array + */ |
| /* 8 * decoder->strike_index_count > face->sbit_table_size ? */ |
| if ( decoder->strike_index_array > face->sbit_table_size || |
| decoder->strike_index_count > |
| ( face->sbit_table_size - decoder->strike_index_array ) / 8 ) |
| error = FT_THROW( Invalid_File_Format ); |
| } |
| |
| Exit: |
| return error; |
| } |
| |
| |
| static void |
| tt_sbit_decoder_done( TT_SBitDecoder decoder ) |
| { |
| FT_UNUSED( decoder ); |
| } |
| |
| |
| static FT_Error |
| tt_sbit_decoder_alloc_bitmap( TT_SBitDecoder decoder, |
| FT_Bool metrics_only ) |
| { |
| FT_Error error = FT_Err_Ok; |
| FT_UInt width, height; |
| FT_Bitmap* map = decoder->bitmap; |
| FT_ULong size; |
| |
| |
| if ( !decoder->metrics_loaded ) |
| { |
| error = FT_THROW( Invalid_Argument ); |
| goto Exit; |
| } |
| |
| width = decoder->metrics->width; |
| height = decoder->metrics->height; |
| |
| map->width = width; |
| map->rows = height; |
| |
| switch ( decoder->bit_depth ) |
| { |
| case 1: |
| map->pixel_mode = FT_PIXEL_MODE_MONO; |
| map->pitch = (int)( ( map->width + 7 ) >> 3 ); |
| map->num_grays = 2; |
| break; |
| |
| case 2: |
| map->pixel_mode = FT_PIXEL_MODE_GRAY2; |
| map->pitch = (int)( ( map->width + 3 ) >> 2 ); |
| map->num_grays = 4; |
| break; |
| |
| case 4: |
| map->pixel_mode = FT_PIXEL_MODE_GRAY4; |
| map->pitch = (int)( ( map->width + 1 ) >> 1 ); |
| map->num_grays = 16; |
| break; |
| |
| case 8: |
| map->pixel_mode = FT_PIXEL_MODE_GRAY; |
| map->pitch = (int)( map->width ); |
| map->num_grays = 256; |
| break; |
| |
| case 32: |
| map->pixel_mode = FT_PIXEL_MODE_BGRA; |
| map->pitch = (int)( map->width * 4 ); |
| map->num_grays = 256; |
| break; |
| |
| default: |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| size = map->rows * (FT_ULong)map->pitch; |
| |
| /* check that there is no empty image */ |
| if ( size == 0 ) |
| goto Exit; /* exit successfully! */ |
| |
| if ( metrics_only ) |
| goto Exit; /* only metrics are requested */ |
| |
| error = ft_glyphslot_alloc_bitmap( decoder->face->root.glyph, size ); |
| if ( error ) |
| goto Exit; |
| |
| decoder->bitmap_allocated = 1; |
| |
| Exit: |
| return error; |
| } |
| |
| |
| static FT_Error |
| tt_sbit_decoder_load_metrics( TT_SBitDecoder decoder, |
| FT_Byte* *pp, |
| FT_Byte* limit, |
| FT_Bool big ) |
| { |
| FT_Byte* p = *pp; |
| TT_SBit_Metrics metrics = decoder->metrics; |
| |
| |
| if ( p + 5 > limit ) |
| goto Fail; |
| |
| metrics->height = p[0]; |
| metrics->width = p[1]; |
| metrics->horiBearingX = (FT_Char)p[2]; |
| metrics->horiBearingY = (FT_Char)p[3]; |
| metrics->horiAdvance = p[4]; |
| |
| p += 5; |
| if ( big ) |
| { |
| if ( p + 3 > limit ) |
| goto Fail; |
| |
| metrics->vertBearingX = (FT_Char)p[0]; |
| metrics->vertBearingY = (FT_Char)p[1]; |
| metrics->vertAdvance = p[2]; |
| |
| p += 3; |
| } |
| else |
| { |
| /* avoid uninitialized data in case there is no vertical info -- */ |
| metrics->vertBearingX = 0; |
| metrics->vertBearingY = 0; |
| metrics->vertAdvance = 0; |
| } |
| |
| decoder->metrics_loaded = 1; |
| *pp = p; |
| return FT_Err_Ok; |
| |
| Fail: |
| FT_TRACE1(( "tt_sbit_decoder_load_metrics: broken table\n" )); |
| return FT_THROW( Invalid_Argument ); |
| } |
| |
| |
| /* forward declaration */ |
| static FT_Error |
| tt_sbit_decoder_load_image( TT_SBitDecoder decoder, |
| FT_UInt glyph_index, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count, |
| FT_Bool metrics_only ); |
| |
| typedef FT_Error (*TT_SBitDecoder_LoadFunc)( |
| TT_SBitDecoder decoder, |
| FT_Byte* p, |
| FT_Byte* plimit, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count ); |
| |
| |
| static FT_Error |
| tt_sbit_decoder_load_byte_aligned( TT_SBitDecoder decoder, |
| FT_Byte* p, |
| FT_Byte* limit, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count ) |
| { |
| FT_Error error = FT_Err_Ok; |
| FT_Byte* line; |
| FT_Int pitch, width, height, line_bits, h; |
| FT_UInt bit_height, bit_width; |
| FT_Bitmap* bitmap; |
| |
| FT_UNUSED( recurse_count ); |
| |
| |
| /* check that we can write the glyph into the bitmap */ |
| bitmap = decoder->bitmap; |
| bit_width = bitmap->width; |
| bit_height = bitmap->rows; |
| pitch = bitmap->pitch; |
| line = bitmap->buffer; |
| |
| width = decoder->metrics->width; |
| height = decoder->metrics->height; |
| |
| line_bits = width * decoder->bit_depth; |
| |
| if ( x_pos < 0 || (FT_UInt)( x_pos + width ) > bit_width || |
| y_pos < 0 || (FT_UInt)( y_pos + height ) > bit_height ) |
| { |
| FT_TRACE1(( "tt_sbit_decoder_load_byte_aligned:" |
| " invalid bitmap dimensions\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| if ( p + ( ( line_bits + 7 ) >> 3 ) * height > limit ) |
| { |
| FT_TRACE1(( "tt_sbit_decoder_load_byte_aligned: broken bitmap\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| /* now do the blit */ |
| line += y_pos * pitch + ( x_pos >> 3 ); |
| x_pos &= 7; |
| |
| if ( x_pos == 0 ) /* the easy one */ |
| { |
| for ( h = height; h > 0; h--, line += pitch ) |
| { |
| FT_Byte* pwrite = line; |
| FT_Int w; |
| |
| |
| for ( w = line_bits; w >= 8; w -= 8 ) |
| { |
| pwrite[0] = (FT_Byte)( pwrite[0] | *p++ ); |
| pwrite += 1; |
| } |
| |
| if ( w > 0 ) |
| pwrite[0] = (FT_Byte)( pwrite[0] | ( *p++ & ( 0xFF00U >> w ) ) ); |
| } |
| } |
| else /* x_pos > 0 */ |
| { |
| for ( h = height; h > 0; h--, line += pitch ) |
| { |
| FT_Byte* pwrite = line; |
| FT_Int w; |
| FT_UInt wval = 0; |
| |
| |
| for ( w = line_bits; w >= 8; w -= 8 ) |
| { |
| wval = (FT_UInt)( wval | *p++ ); |
| pwrite[0] = (FT_Byte)( pwrite[0] | ( wval >> x_pos ) ); |
| pwrite += 1; |
| wval <<= 8; |
| } |
| |
| if ( w > 0 ) |
| wval = (FT_UInt)( wval | ( *p++ & ( 0xFF00U >> w ) ) ); |
| |
| /* all bits read and there are `x_pos + w' bits to be written */ |
| |
| pwrite[0] = (FT_Byte)( pwrite[0] | ( wval >> x_pos ) ); |
| |
| if ( x_pos + w > 8 ) |
| { |
| pwrite++; |
| wval <<= 8; |
| pwrite[0] = (FT_Byte)( pwrite[0] | ( wval >> x_pos ) ); |
| } |
| } |
| } |
| |
| Exit: |
| if ( !error ) |
| FT_TRACE3(( "tt_sbit_decoder_load_byte_aligned: loaded\n" )); |
| return error; |
| } |
| |
| |
| /* |
| * Load a bit-aligned bitmap (with pointer `p') into a line-aligned bitmap |
| * (with pointer `pwrite'). In the example below, the width is 3 pixel, |
| * and `x_pos' is 1 pixel. |
| * |
| * p p+1 |
| * | | | |
| * | 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 |... |
| * | | | |
| * +-------+ +-------+ +-------+ ... |
| * . . . |
| * . . . |
| * v . . |
| * +-------+ . . |
| * | | . |
| * | 7 6 5 4 3 2 1 0 | . |
| * | | . |
| * pwrite . . |
| * . . |
| * v . |
| * +-------+ . |
| * | | |
| * | 7 6 5 4 3 2 1 0 | |
| * | | |
| * pwrite+1 . |
| * . |
| * v |
| * +-------+ |
| * | | |
| * | 7 6 5 4 3 2 1 0 | |
| * | | |
| * pwrite+2 |
| * |
| */ |
| |
| static FT_Error |
| tt_sbit_decoder_load_bit_aligned( TT_SBitDecoder decoder, |
| FT_Byte* p, |
| FT_Byte* limit, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count ) |
| { |
| FT_Error error = FT_Err_Ok; |
| FT_Byte* line; |
| FT_Int pitch, width, height, line_bits, h, nbits; |
| FT_UInt bit_height, bit_width; |
| FT_Bitmap* bitmap; |
| FT_UShort rval; |
| |
| FT_UNUSED( recurse_count ); |
| |
| |
| /* check that we can write the glyph into the bitmap */ |
| bitmap = decoder->bitmap; |
| bit_width = bitmap->width; |
| bit_height = bitmap->rows; |
| pitch = bitmap->pitch; |
| line = bitmap->buffer; |
| |
| width = decoder->metrics->width; |
| height = decoder->metrics->height; |
| |
| line_bits = width * decoder->bit_depth; |
| |
| if ( x_pos < 0 || (FT_UInt)( x_pos + width ) > bit_width || |
| y_pos < 0 || (FT_UInt)( y_pos + height ) > bit_height ) |
| { |
| FT_TRACE1(( "tt_sbit_decoder_load_bit_aligned:" |
| " invalid bitmap dimensions\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| if ( p + ( ( line_bits * height + 7 ) >> 3 ) > limit ) |
| { |
| FT_TRACE1(( "tt_sbit_decoder_load_bit_aligned: broken bitmap\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| if ( !line_bits || !height ) |
| { |
| /* nothing to do */ |
| goto Exit; |
| } |
| |
| /* now do the blit */ |
| |
| /* adjust `line' to point to the first byte of the bitmap */ |
| line += y_pos * pitch + ( x_pos >> 3 ); |
| x_pos &= 7; |
| |
| /* the higher byte of `rval' is used as a buffer */ |
| rval = 0; |
| nbits = 0; |
| |
| for ( h = height; h > 0; h--, line += pitch ) |
| { |
| FT_Byte* pwrite = line; |
| FT_Int w = line_bits; |
| |
| |
| /* handle initial byte (in target bitmap) specially if necessary */ |
| if ( x_pos ) |
| { |
| w = ( line_bits < 8 - x_pos ) ? line_bits : 8 - x_pos; |
| |
| if ( h == height ) |
| { |
| rval = *p++; |
| nbits = x_pos; |
| } |
| else if ( nbits < w ) |
| { |
| if ( p < limit ) |
| rval |= *p++; |
| nbits += 8 - w; |
| } |
| else |
| { |
| rval >>= 8; |
| nbits -= w; |
| } |
| |
| *pwrite++ |= ( ( rval >> nbits ) & 0xFF ) & |
| ( ~( 0xFFU << w ) << ( 8 - w - x_pos ) ); |
| rval <<= 8; |
| |
| w = line_bits - w; |
| } |
| |
| /* handle medial bytes */ |
| for ( ; w >= 8; w -= 8 ) |
| { |
| rval |= *p++; |
| *pwrite++ |= ( rval >> nbits ) & 0xFF; |
| |
| rval <<= 8; |
| } |
| |
| /* handle final byte if necessary */ |
| if ( w > 0 ) |
| { |
| if ( nbits < w ) |
| { |
| if ( p < limit ) |
| rval |= *p++; |
| *pwrite |= ( ( rval >> nbits ) & 0xFF ) & ( 0xFF00U >> w ); |
| nbits += 8 - w; |
| |
| rval <<= 8; |
| } |
| else |
| { |
| *pwrite |= ( ( rval >> nbits ) & 0xFF ) & ( 0xFF00U >> w ); |
| nbits -= w; |
| } |
| } |
| } |
| |
| Exit: |
| if ( !error ) |
| FT_TRACE3(( "tt_sbit_decoder_load_bit_aligned: loaded\n" )); |
| return error; |
| } |
| |
| |
| static FT_Error |
| tt_sbit_decoder_load_compound( TT_SBitDecoder decoder, |
| FT_Byte* p, |
| FT_Byte* limit, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count ) |
| { |
| FT_Error error = FT_Err_Ok; |
| FT_UInt num_components, nn; |
| |
| FT_Char horiBearingX = (FT_Char)decoder->metrics->horiBearingX; |
| FT_Char horiBearingY = (FT_Char)decoder->metrics->horiBearingY; |
| FT_Byte horiAdvance = (FT_Byte)decoder->metrics->horiAdvance; |
| FT_Char vertBearingX = (FT_Char)decoder->metrics->vertBearingX; |
| FT_Char vertBearingY = (FT_Char)decoder->metrics->vertBearingY; |
| FT_Byte vertAdvance = (FT_Byte)decoder->metrics->vertAdvance; |
| |
| |
| if ( p + 2 > limit ) |
| goto Fail; |
| |
| num_components = FT_NEXT_USHORT( p ); |
| if ( p + 4 * num_components > limit ) |
| { |
| FT_TRACE1(( "tt_sbit_decoder_load_compound: broken table\n" )); |
| goto Fail; |
| } |
| |
| FT_TRACE3(( "tt_sbit_decoder_load_compound: loading %d component%s\n", |
| num_components, |
| num_components == 1 ? "" : "s" )); |
| |
| for ( nn = 0; nn < num_components; nn++ ) |
| { |
| FT_UInt gindex = FT_NEXT_USHORT( p ); |
| FT_Char dx = FT_NEXT_CHAR( p ); |
| FT_Char dy = FT_NEXT_CHAR( p ); |
| |
| |
| /* NB: a recursive call */ |
| error = tt_sbit_decoder_load_image( decoder, |
| gindex, |
| x_pos + dx, |
| y_pos + dy, |
| recurse_count + 1, |
| /* request full bitmap image */ |
| FALSE ); |
| if ( error ) |
| break; |
| } |
| |
| FT_TRACE3(( "tt_sbit_decoder_load_compound: done\n" )); |
| |
| decoder->metrics->horiBearingX = horiBearingX; |
| decoder->metrics->horiBearingY = horiBearingY; |
| decoder->metrics->horiAdvance = horiAdvance; |
| decoder->metrics->vertBearingX = vertBearingX; |
| decoder->metrics->vertBearingY = vertBearingY; |
| decoder->metrics->vertAdvance = vertAdvance; |
| decoder->metrics->width = (FT_Byte)decoder->bitmap->width; |
| decoder->metrics->height = (FT_Byte)decoder->bitmap->rows; |
| |
| Exit: |
| return error; |
| |
| Fail: |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| |
| #ifdef FT_CONFIG_OPTION_USE_PNG |
| |
| static FT_Error |
| tt_sbit_decoder_load_png( TT_SBitDecoder decoder, |
| FT_Byte* p, |
| FT_Byte* limit, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count ) |
| { |
| FT_Error error = FT_Err_Ok; |
| FT_ULong png_len; |
| |
| FT_UNUSED( recurse_count ); |
| |
| |
| if ( limit - p < 4 ) |
| { |
| FT_TRACE1(( "tt_sbit_decoder_load_png: broken bitmap\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| png_len = FT_NEXT_ULONG( p ); |
| if ( (FT_ULong)( limit - p ) < png_len ) |
| { |
| FT_TRACE1(( "tt_sbit_decoder_load_png: broken bitmap\n" )); |
| error = FT_THROW( Invalid_File_Format ); |
| goto Exit; |
| } |
| |
| error = Load_SBit_Png( decoder->face->root.glyph, |
| x_pos, |
| y_pos, |
| decoder->bit_depth, |
| decoder->metrics, |
| decoder->stream->memory, |
| p, |
| png_len, |
| FALSE, |
| FALSE ); |
| |
| Exit: |
| if ( !error ) |
| FT_TRACE3(( "tt_sbit_decoder_load_png: loaded\n" )); |
| return error; |
| } |
| |
| #endif /* FT_CONFIG_OPTION_USE_PNG */ |
| |
| |
| static FT_Error |
| tt_sbit_decoder_load_bitmap( TT_SBitDecoder decoder, |
| FT_UInt glyph_format, |
| FT_ULong glyph_start, |
| FT_ULong glyph_size, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count, |
| FT_Bool metrics_only ) |
| { |
| FT_Error error; |
| FT_Stream stream = decoder->stream; |
| FT_Byte* p; |
| FT_Byte* p_limit; |
| FT_Byte* data; |
| |
| |
| /* seek into the EBDT table now */ |
| if ( !glyph_size || |
| glyph_start + glyph_size > decoder->ebdt_size ) |
| { |
| error = FT_THROW( Invalid_Argument ); |
| goto Exit; |
| } |
| |
| if ( FT_STREAM_SEEK( decoder->ebdt_start + glyph_start ) || |
| FT_FRAME_EXTRACT( glyph_size, data ) ) |
| goto Exit; |
| |
| p = data; |
| p_limit = p + glyph_size; |
| |
| /* read the data, depending on the glyph format */ |
| switch ( glyph_format ) |
| { |
| case 1: |
| case 2: |
| case 8: |
| case 17: |
| error = tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 0 ); |
| break; |
| |
| case 6: |
| case 7: |
| case 9: |
| case 18: |
| error = tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 1 ); |
| break; |
| |
| default: |
| error = FT_Err_Ok; |
| } |
| |
| if ( error ) |
| goto Fail; |
| |
| { |
| TT_SBitDecoder_LoadFunc loader; |
| |
| |
| switch ( glyph_format ) |
| { |
| case 1: |
| case 6: |
| loader = tt_sbit_decoder_load_byte_aligned; |
| break; |
| |
| case 2: |
| case 7: |
| { |
| /* Don't trust `glyph_format'. For example, Apple's main Korean */ |
| /* system font, `AppleMyungJo.ttf' (version 7.0d2e6), uses glyph */ |
| /* format 7, but the data is format 6. We check whether we have */ |
| /* an excessive number of bytes in the image: If it is equal to */ |
| /* the value for a byte-aligned glyph, use the other loading */ |
| /* routine. */ |
| /* */ |
| /* Note that for some (width,height) combinations, where the */ |
| /* width is not a multiple of 8, the sizes for bit- and */ |
| /* byte-aligned data are equal, for example (7,7) or (15,6). We */ |
| /* then prefer what `glyph_format' specifies. */ |
| |
| FT_UInt width = decoder->metrics->width; |
| FT_UInt height = decoder->metrics->height; |
| |
| FT_UInt bit_size = ( width * height + 7 ) >> 3; |
| FT_UInt byte_size = height * ( ( width + 7 ) >> 3 ); |
| |
| |
| if ( bit_size < byte_size && |
| byte_size == (FT_UInt)( p_limit - p ) ) |
| loader = tt_sbit_decoder_load_byte_aligned; |
| else |
| loader = tt_sbit_decoder_load_bit_aligned; |
| } |
| break; |
| |
| case 5: |
| loader = tt_sbit_decoder_load_bit_aligned; |
| break; |
| |
| case 8: |
| if ( p + 1 > p_limit ) |
| goto Fail; |
| |
| p += 1; /* skip padding */ |
| /* fall-through */ |
| |
| case 9: |
| loader = tt_sbit_decoder_load_compound; |
| break; |
| |
| case 17: /* small metrics, PNG image data */ |
| case 18: /* big metrics, PNG image data */ |
| case 19: /* metrics in EBLC, PNG image data */ |
| #ifdef FT_CONFIG_OPTION_USE_PNG |
| loader = tt_sbit_decoder_load_png; |
| break; |
| #else |
| error = FT_THROW( Unimplemented_Feature ); |
| goto Fail; |
| #endif /* FT_CONFIG_OPTION_USE_PNG */ |
| |
| default: |
| error = FT_THROW( Invalid_Table ); |
| goto Fail; |
| } |
| |
| if ( !decoder->bitmap_allocated ) |
| { |
| error = tt_sbit_decoder_alloc_bitmap( decoder, metrics_only ); |
| |
| if ( error ) |
| goto Fail; |
| } |
| |
| if ( metrics_only ) |
| goto Fail; /* this is not an error */ |
| |
| error = loader( decoder, p, p_limit, x_pos, y_pos, recurse_count ); |
| } |
| |
| Fail: |
| FT_FRAME_RELEASE( data ); |
| |
| Exit: |
| return error; |
| } |
| |
| |
| static FT_Error |
| tt_sbit_decoder_load_image( TT_SBitDecoder decoder, |
| FT_UInt glyph_index, |
| FT_Int x_pos, |
| FT_Int y_pos, |
| FT_UInt recurse_count, |
| FT_Bool metrics_only ) |
| { |
| FT_Byte* p = decoder->eblc_base + decoder->strike_index_array; |
| FT_Byte* p_limit = decoder->eblc_limit; |
| FT_ULong num_ranges = decoder->strike_index_count; |
| FT_UInt start, end, index_format, image_format; |
| FT_ULong image_start = 0, image_end = 0, image_offset; |
| |
| |
| /* arbitrary recursion limit */ |
| if ( recurse_count > 100 ) |
| { |
| FT_TRACE4(( "tt_sbit_decoder_load_image:" |
| " recursion depth exceeded\n" )); |
| goto Failure; |
| } |
| |
| |
| /* First, we find the correct strike range that applies to this */ |
| /* glyph index. */ |
| for ( ; num_ranges > 0; num_ranges-- ) |
| { |
| start = FT_NEXT_USHORT( p ); |
| end = FT_NEXT_USHORT( p ); |
| |
| if ( glyph_index >= start && glyph_index <= end ) |
| goto FoundRange; |
| |
| p += 4; /* ignore index offset */ |
| } |
| goto NoBitmap; |
| |
| FoundRange: |
| image_offset = FT_NEXT_ULONG( p ); |
| |
| /* overflow check */ |
| p = decoder->eblc_base + decoder->strike_index_array; |
| if ( image_offset > (FT_ULong)( p_limit - p ) ) |
| goto Failure; |
| |
| p += image_offset; |
| if ( p + 8 > p_limit ) |
| goto NoBitmap; |
| |
| /* now find the glyph's location and extend within the ebdt table */ |
| index_format = FT_NEXT_USHORT( p ); |
| image_format = FT_NEXT_USHORT( p ); |
| image_offset = FT_NEXT_ULONG ( p ); |
| |
| switch ( index_format ) |
| { |
| case 1: /* 4-byte offsets relative to `image_offset' */ |
| p += 4 * ( glyph_index - start ); |
| if ( p + 8 > p_limit ) |
| goto NoBitmap; |
| |
| image_start = FT_NEXT_ULONG( p ); |
| image_end = FT_NEXT_ULONG( p ); |
| |
| if ( image_start == image_end ) /* missing glyph */ |
| goto NoBitmap; |
| break; |
| |
| case 2: /* big metrics, constant image size */ |
| { |
| FT_ULong image_size; |
| |
| |
| if ( p + 12 > p_limit ) |
| goto NoBitmap; |
| |
| image_size = FT_NEXT_ULONG( p ); |
| |
| if ( tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 1 ) ) |
| goto NoBitmap; |
| |
| image_start = image_size * ( glyph_index - start ); |
| image_end = image_start + image_size; |
| } |
| break; |
| |
| case 3: /* 2-byte offsets relative to 'image_offset' */ |
| p += 2 * ( glyph_index - start ); |
| if ( p + 4 > p_limit ) |
| goto NoBitmap; |
| |
| image_start = FT_NEXT_USHORT( p ); |
| image_end = FT_NEXT_USHORT( p ); |
| |
| if ( image_start == image_end ) /* missing glyph */ |
| goto NoBitmap; |
| break; |
| |
| case 4: /* sparse glyph array with (glyph,offset) pairs */ |
| { |
| FT_ULong mm, num_glyphs; |
| |
| |
| if ( p + 4 > p_limit ) |
| goto NoBitmap; |
| |
| num_glyphs = FT_NEXT_ULONG( p ); |
| |
| /* overflow check for p + ( num_glyphs + 1 ) * 4 */ |
| if ( p + 4 > p_limit || |
| num_glyphs > (FT_ULong)( ( ( p_limit - p ) >> 2 ) - 1 ) ) |
| goto NoBitmap; |
| |
| for ( mm = 0; mm < num_glyphs; mm++ ) |
| { |
| FT_UInt gindex = FT_NEXT_USHORT( p ); |
| |
| |
| if ( gindex == glyph_index ) |
| { |
| image_start = FT_NEXT_USHORT( p ); |
| p += 2; |
| image_end = FT_PEEK_USHORT( p ); |
| break; |
| } |
| p += 2; |
| } |
| |
| if ( mm >= num_glyphs ) |
| goto NoBitmap; |
| } |
| break; |
| |
| case 5: /* constant metrics with sparse glyph codes */ |
| case 19: |
| { |
| FT_ULong image_size, mm, num_glyphs; |
| |
| |
| if ( p + 16 > p_limit ) |
| goto NoBitmap; |
| |
| image_size = FT_NEXT_ULONG( p ); |
| |
| if ( tt_sbit_decoder_load_metrics( decoder, &p, p_limit, 1 ) ) |
| goto NoBitmap; |
| |
| num_glyphs = FT_NEXT_ULONG( p ); |
| |
| /* overflow check for p + 2 * num_glyphs */ |
| if ( num_glyphs > (FT_ULong)( ( p_limit - p ) >> 1 ) ) |
| goto NoBitmap; |
| |
| for ( mm = 0; mm < num_glyphs; mm++ ) |
| { |
| FT_UInt gindex = FT_NEXT_USHORT( p ); |
| |
| |
| if ( gindex == glyph_index ) |
| break; |
| } |
| |
| if ( mm >= num_glyphs ) |
| goto NoBitmap; |
| |
| image_start = image_size * mm; |
| image_end = image_start + image_size; |
| } |
| break; |
| |
| default: |
| goto NoBitmap; |
| } |
| |
| if ( image_start > image_end ) |
| goto NoBitmap; |
| |
| image_end -= image_start; |
| image_start = image_offset + image_start; |
| |
| FT_TRACE3(( "tt_sbit_decoder_load_image:" |
| " found sbit (format %d) for glyph index %d\n", |
| image_format, glyph_index )); |
| |
| return tt_sbit_decoder_load_bitmap( decoder, |
| image_format, |
| image_start, |
| image_end, |
| x_pos, |
| y_pos, |
| recurse_count, |
| metrics_only ); |
| |
| Failure: |
| return FT_THROW( Invalid_Table ); |
| |
| NoBitmap: |
| if ( recurse_count ) |
| { |
| FT_TRACE4(( "tt_sbit_decoder_load_image:" |
| " missing subglyph sbit with glyph index %d\n", |
| glyph_index )); |
| return FT_THROW( Invalid_Composite ); |
| } |
| |
| FT_TRACE4(( "tt_sbit_decoder_load_image:" |
| " no sbit found for glyph index %d\n", glyph_index )); |
| return FT_THROW( Missing_Bitmap ); |
| } |
| |
| |
| static FT_Error |
| tt_face_load_sbix_image( TT_Face face, |
| FT_ULong strike_index, |
| FT_UInt glyph_index, |
| FT_Stream stream, |
| FT_Bitmap *map, |
| TT_SBit_MetricsRec *metrics, |
| FT_Bool metrics_only ) |
| { |
| FT_UInt strike_offset, glyph_start, glyph_end; |
| FT_Int originOffsetX, originOffsetY; |
| FT_Tag graphicType; |
| FT_Int recurse_depth = 0; |
| |
| FT_Error error; |
| FT_Byte* p; |
| |
| FT_UNUSED( map ); |
| #ifndef FT_CONFIG_OPTION_USE_PNG |
| FT_UNUSED( metrics_only ); |
| #endif |
| |
| |
| strike_index = face->sbit_strike_map[strike_index]; |
| |
| metrics->width = 0; |
| metrics->height = 0; |
| |
| p = face->sbit_table + 8 + 4 * strike_index; |
| strike_offset = FT_NEXT_ULONG( p ); |
| |
| retry: |
| if ( glyph_index > (FT_UInt)face->root.num_glyphs ) |
| return FT_THROW( Invalid_Argument ); |
| |
| if ( strike_offset >= face->ebdt_size || |
| face->ebdt_size - strike_offset < 4 + glyph_index * 4 + 8 ) |
| return FT_THROW( Invalid_File_Format ); |
| |
| if ( FT_STREAM_SEEK( face->ebdt_start + |
| strike_offset + 4 + |
| glyph_index * 4 ) || |
| FT_FRAME_ENTER( 8 ) ) |
| return error; |
| |
| glyph_start = FT_GET_ULONG(); |
| glyph_end = FT_GET_ULONG(); |
| |
| FT_FRAME_EXIT(); |
| |
| if ( glyph_start == glyph_end ) |
| return FT_THROW( Missing_Bitmap ); |
| if ( glyph_start > glyph_end || |
| glyph_end - glyph_start < 8 || |
| face->ebdt_size - strike_offset < glyph_end ) |
| return FT_THROW( Invalid_File_Format ); |
| |
| if ( FT_STREAM_SEEK( face->ebdt_start + strike_offset + glyph_start ) || |
| FT_FRAME_ENTER( glyph_end - glyph_start ) ) |
| return error; |
| |
| originOffsetX = FT_GET_SHORT(); |
| originOffsetY = FT_GET_SHORT(); |
| |
| graphicType = FT_GET_TAG4(); |
| |
| switch ( graphicType ) |
| { |
| case FT_MAKE_TAG( 'd', 'u', 'p', 'e' ): |
| if ( recurse_depth < 4 ) |
| { |
| glyph_index = FT_GET_USHORT(); |
| FT_FRAME_EXIT(); |
| recurse_depth++; |
| goto retry; |
| } |
| error = FT_THROW( Invalid_File_Format ); |
| break; |
| |
| case FT_MAKE_TAG( 'p', 'n', 'g', ' ' ): |
| #ifdef FT_CONFIG_OPTION_USE_PNG |
| error = Load_SBit_Png( face->root.glyph, |
| 0, |
| 0, |
| 32, |
| metrics, |
| stream->memory, |
| stream->cursor, |
| glyph_end - glyph_start - 8, |
| TRUE, |
| metrics_only ); |
| #else |
| error = FT_THROW( Unimplemented_Feature ); |
| #endif |
| break; |
| |
| case FT_MAKE_TAG( 'j', 'p', 'g', ' ' ): |
| case FT_MAKE_TAG( 't', 'i', 'f', 'f' ): |
| case FT_MAKE_TAG( 'r', 'g', 'b', 'l' ): /* used on iOS 7.1 */ |
| error = FT_THROW( Unknown_File_Format ); |
| break; |
| |
| default: |
| error = FT_THROW( Unimplemented_Feature ); |
| break; |
| } |
| |
| FT_FRAME_EXIT(); |
| |
| if ( !error ) |
| { |
| FT_Short abearing; |
| FT_UShort aadvance; |
| |
| |
| tt_face_get_metrics( face, FALSE, glyph_index, &abearing, &aadvance ); |
| |
| metrics->horiBearingX = (FT_Short)originOffsetX; |
| metrics->horiBearingY = (FT_Short)( -originOffsetY + metrics->height ); |
| metrics->horiAdvance = (FT_UShort)( aadvance * |
| face->root.size->metrics.x_ppem / |
| face->header.Units_Per_EM ); |
| } |
| |
| return error; |
| } |
| |
| FT_LOCAL( FT_Error ) |
| tt_face_load_sbit_image( TT_Face face, |
| FT_ULong strike_index, |
| FT_UInt glyph_index, |
| FT_UInt load_flags, |
| FT_Stream stream, |
| FT_Bitmap *map, |
| TT_SBit_MetricsRec *metrics ) |
| { |
| FT_Error error = FT_Err_Ok; |
| |
| |
| switch ( (FT_UInt)face->sbit_table_type ) |
| { |
| case TT_SBIT_TABLE_TYPE_EBLC: |
| case TT_SBIT_TABLE_TYPE_CBLC: |
| { |
| TT_SBitDecoderRec decoder[1]; |
| |
| |
| error = tt_sbit_decoder_init( decoder, face, strike_index, metrics ); |
| if ( !error ) |
| { |
| error = tt_sbit_decoder_load_image( |
| decoder, |
| glyph_index, |
| 0, |
| 0, |
| 0, |
| ( load_flags & FT_LOAD_BITMAP_METRICS_ONLY ) != 0 ); |
| tt_sbit_decoder_done( decoder ); |
| } |
| } |
| break; |
| |
| case TT_SBIT_TABLE_TYPE_SBIX: |
| error = tt_face_load_sbix_image( |
| face, |
| strike_index, |
| glyph_index, |
| stream, |
| map, |
| metrics, |
| ( load_flags & FT_LOAD_BITMAP_METRICS_ONLY ) != 0 ); |
| break; |
| |
| default: |
| error = FT_THROW( Unknown_File_Format ); |
| break; |
| } |
| |
| /* Flatten color bitmaps if color was not requested. */ |
| if ( !error && |
| !( load_flags & FT_LOAD_COLOR ) && |
| !( load_flags & FT_LOAD_BITMAP_METRICS_ONLY ) && |
| map->pixel_mode == FT_PIXEL_MODE_BGRA ) |
| { |
| FT_Bitmap new_map; |
| FT_Library library = face->root.glyph->library; |
| |
| |
| FT_Bitmap_Init( &new_map ); |
| |
| /* Convert to 8bit grayscale. */ |
| error = FT_Bitmap_Convert( library, map, &new_map, 1 ); |
| if ( error ) |
| FT_Bitmap_Done( library, &new_map ); |
| else |
| { |
| map->pixel_mode = new_map.pixel_mode; |
| map->pitch = new_map.pitch; |
| map->num_grays = new_map.num_grays; |
| |
| ft_glyphslot_set_bitmap( face->root.glyph, new_map.buffer ); |
| face->root.glyph->internal->flags |= FT_GLYPH_OWN_BITMAP; |
| } |
| } |
| |
| return error; |
| } |
| |
| #else /* !TT_CONFIG_OPTION_EMBEDDED_BITMAPS */ |
| |
| /* ANSI C doesn't like empty source files */ |
| typedef int _tt_sbit_dummy; |
| |
| #endif /* !TT_CONFIG_OPTION_EMBEDDED_BITMAPS */ |
| |
| |
| /* END */ |
