Before diving into the FlatBuffers usage in C++, it should be noted that the [Tutorial](@ref flatbuffers_guide_tutorial) page has a complete guide to general FlatBuffers usage in all of the supported languages (including C++). This page is designed to cover the nuances of FlatBuffers usage, specific to C++.
This page assumes you have written a FlatBuffers schema and compiled it with the Schema Compiler. If you have not, please see [Using the schema compiler](@ref flatbuffers_guide_using_schema_compiler) and [Writing a schema](@ref flatbuffers_guide_writing_schema).
Assuming you wrote a schema, say mygame.fbs (though the extension doesn‘t matter), you’ve generated a C++ header called mygame_generated.h using the compiler (e.g. flatc -c mygame.fbs), you can now start using this in your program by including the header. As noted, this header relies on flatbuffers/flatbuffers.h, which should be in your include path.
The code for the FlatBuffers C++ library can be found at flatbuffers/include/flatbuffers. You can browse the library code on the FlatBuffers GitHub page.
The code to test the C++ library can be found at flatbuffers/tests. The test code itself is located in test.cpp.
This test file is built alongside flatc. To review how to build the project, please read the [Building](@ref flatbuffers_guide_building) documenation.
To run the tests, execute flattests from the root flatbuffers/ directory. For example, on Linux, you would simply run: ./flattests.
Note: See [Tutorial](@ref flatbuffers_guide_tutorial) for a more in-depth example of how to use FlatBuffers in C++.
FlatBuffers supports both reading and writing FlatBuffers in C++.
To use FlatBuffers in your code, first generate the C++ classes from your schema with the --cpp option to flatc. Then you can include both FlatBuffers and the generated code to read or write FlatBuffers.
For example, here is how you would read a FlatBuffer binary file in C++: First, include the library and generated code. Then read the file into a char * array, which you pass to GetMonster().
#include "flatbuffers/flatbuffers.h" #include "monster_test_generate.h" #include <cstdio> // For printing and file access. FILE* file = fopen("monsterdata_test.mon", "rb"); fseek(file, 0L, SEEK_END); int length = ftell(file); fseek(file, 0L, SEEK_SET); char *data = new char[length]; fread(data, sizeof(char), length, file); fclose(file); auto monster = GetMonster(data);
monster is of type Monster *, and points to somewhere inside your buffer (root object pointers are not the same as buffer_pointer !). If you look in your generated header, you'll see it has convenient accessors for all fields, e.g. hp(), mana(), etc:
printf("%d\n", monster->hp()); // `80` printf("%d\n", monster->mana()); // default value of `150` printf("%s\n", monster->name()->c_str()); // "MyMonster"
Note: That we never stored a mana value, so it will return the default.
FlatBuffers is all about memory efficiency, which is why its base API is written around using as little as possible of it. This does make the API clumsier (requiring pre-order construction of all data, and making mutation harder).
For times when efficiency is less important a more convenient object based API can be used (through --gen-object-api) that is able to unpack & pack a FlatBuffer into objects and standard STL containers, allowing for convenient construction, access and mutation.
To use:
auto monsterobj = GetMonster(buffer)->UnPack(); cout << monsterobj->name; // This is now a std::string! monsterobj->name = "Bob"; // Change the name. FlatBufferBuilder fbb; CreateMonster(fbb, monsterobj.get()); // Serialize into new buffer.
An additional feature of the object API is the ability to allow you to load multiple independent FlatBuffers, and have them refer to eachothers objects using hashes which are then represented as typed pointers in the object API.
To make this work have a field in the objects you want to referred to which is using the string hashing feature (see hash attribute in the [schema](@ref flatbuffers_guide_writing_schema) documentation). Then you have a similar hash in the field referring to it, along with a cpp_type attribute specifying the C++ type this will refer to (this can be any C++ type, and will get a * added).
Then, in JSON or however you create these buffers, make sure they use the same string (or hash).
When you call UnPack (or Create), you'll need a function that maps from hash to the object (see resolver_function_t for details).
There is experimental support for reflection in FlatBuffers, allowing you to read and write data even if you don't know the exact format of a buffer, and even allows you to change sizes of strings and vectors in-place.
The way this works is very elegant; there is actually a FlatBuffer schema that describes schemas (!) which you can find in reflection/reflection.fbs. The compiler, flatc, can write out any schemas it has just parsed as a binary FlatBuffer, corresponding to this meta-schema.
Loading in one of these binary schemas at runtime allows you traverse any FlatBuffer data that corresponds to it without knowing the exact format. You can query what fields are present, and then read/write them after.
For convenient field manipulation, you can include the header flatbuffers/reflection.h which includes both the generated code from the meta schema, as well as a lot of helper functions.
And example of usage, for the time being, can be found in test.cpp/ReflectionTest().
FlatBuffers doesn't support maps natively, but there is support to emulate their behavior with vectors and binary search, which means you can have fast lookups directly from a FlatBuffer without having to unpack your data into a std::map or similar.
To use it:
key attribute on this field, e.g. name:string (key). You may only have one key field, and it must be of string or scalar type.CreateVector, call CreateVectorOfSortedTables, which will first sort all offsets such that the tables they refer to are sorted by the key field, then serialize it.Vector::LookupByKey instead of just Vector::Get to access elements of the vector, e.g.: myvector->LookupByKey("Fred"), which returns a pointer to the corresponding table type, or nullptr if not found. LookupByKey performs a binary search, so should have a similar speed to std::map, though may be faster because of better caching. LookupByKey only works if the vector has been sorted, it will likely not find elements if it hasn’t been sorted.As you can see from the above examples, all elements in a buffer are accessed through generated accessors. This is because everything is stored in little endian format on all platforms (the accessor performs a swap operation on big endian machines), and also because the layout of things is generally not known to the user.
For structs, layout is deterministic and guaranteed to be the same accross platforms (scalars are aligned to their own size, and structs themselves to their largest member), and you are allowed to access this memory directly by using sizeof() and memcpy on the pointer to a struct, or even an array of structs.
To compute offsets to sub-elements of a struct, make sure they are a structs themselves, as then you can use the pointers to figure out the offset without having to hardcode it. This is handy for use of arrays of structs with calls like glVertexAttribPointer in OpenGL or similar APIs.
It is important to note is that structs are still little endian on all machines, so only use tricks like this if you can guarantee you're not shipping on a big endian machine (an assert(FLATBUFFERS_LITTLEENDIAN) would be wise).
The generated accessor functions access fields over offsets, which is very quick. These offsets are not verified at run-time, so a malformed buffer could cause a program to crash by accessing random memory.
When you're processing large amounts of data from a source you know (e.g. your own generated data on disk), this is acceptable, but when reading data from the network that can potentially have been modified by an attacker, this is undesirable.
For this reason, you can optionally use a buffer verifier before you access the data. This verifier will check all offsets, all sizes of fields, and null termination of strings to ensure that when a buffer is accessed, all reads will end up inside the buffer.
Each root type will have a verification function generated for it, e.g. for Monster, you can call:
bool ok = VerifyMonsterBuffer(Verifier(buf, len));
if ok is true, the buffer is safe to read.
Besides untrusted data, this function may be useful to call in debug mode, as extra insurance against data being corrupted somewhere along the way.
While verifying a buffer isn't “free”, it is typically faster than a full traversal (since any scalar data is not actually touched), and since it may cause the buffer to be brought into cache before reading, the actual overhead may be even lower than expected.
In specialized cases where a denial of service attack is possible, the verifier has two additional constructor arguments that allow you to limit the nesting depth and total amount of tables the verifier may encounter before declaring the buffer malformed. The default is Verifier(buf, len, 64 /* max depth */, 1000000, /* max tables */) which should be sufficient for most uses.
Using binary buffers with the generated header provides a super low overhead use of FlatBuffer data. There are, however, times when you want to use text formats, for example because it interacts better with source control, or you want to give your users easy access to data.
Another reason might be that you already have a lot of data in JSON format, or a tool that generates JSON, and if you can write a schema for it, this will provide you an easy way to use that data directly.
(see the schema documentation for some specifics on the JSON format accepted).
There are two ways to use text formats:
This is the preferred path, as it doesn't require you to add any new code to your program, and is maximally efficient since you can ship with binary data. The disadvantage is that it is an extra step for your users/developers to perform, though you might be able to automate it.
flatc -b myschema.fbs mydata.json
This will generate the binary file mydata_wire.bin which can be loaded as before.
This gives you maximum flexibility. You could even opt to support both, i.e. check for both files, and regenerate the binary from text when required, otherwise just load the binary.
This option is currently only available for C++, or Java through JNI.
As mentioned in the section “Building” above, this technique requires you to link a few more files into your program, and you'll want to include flatbuffers/idl.h.
Load text (either a schema or json) into an in-memory buffer (there is a convenient LoadFile() utility function in flatbuffers/util.h if you wish). Construct a parser:
flatbuffers::Parser parser;
Now you can parse any number of text files in sequence:
parser.Parse(text_file.c_str());
This works similarly to how the command-line compiler works: a sequence of files parsed by the same Parser object allow later files to reference definitions in earlier files. Typically this means you first load a schema file (which populates Parser with definitions), followed by one or more JSON files.
As optional argument to Parse, you may specify a null-terminated list of include paths. If not specified, any include statements try to resolve from the current directory.
If there were any parsing errors, Parse will return false, and Parser::err contains a human readable error string with a line number etc, which you should present to the creator of that file.
After each JSON file, the Parser::fbb member variable is the FlatBufferBuilder that contains the binary buffer version of that file, that you can access as described above.
samples/sample_text.cpp is a code sample showing the above operations.
Reading a FlatBuffer does not touch any memory outside the original buffer, and is entirely read-only (all const), so is safe to access from multiple threads even without synchronisation primitives.
Creating a FlatBuffer is not thread safe. All state related to building a FlatBuffer is contained in a FlatBufferBuilder instance, and no memory outside of it is touched. To make this thread safe, either do not share instances of FlatBufferBuilder between threads (recommended), or manually wrap it in synchronisation primites. There's no automatic way to accomplish this, by design, as we feel multithreaded construction of a single buffer will be rare, and synchronisation overhead would be costly.