/*++

Copyright (c)  1999  - 2014, Intel Corporation. All rights reserved

  This program and the accompanying materials are licensed and made available under
  the terms and conditions of the BSD License that accompanies this distribution.
  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php.

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.



Module Name:

  IgdOSBCB.ASL

Abstract:

  IGD OpRegion/Software SCI Reference Code for the Baytrail Family.
  This file contains the system BIOS call back functionality for the
  OpRegion/Software SCI mechanism.

--*/


Method (SBCB, 0, Serialized)
{

  // Supported Callbacks: Sub-function 0

  If (LEqual(GESF, 0x0))
  {

    //<TODO> An OEM may support the driver->SBIOS status callbacks, but
    // the supported callbacks value must be modified.  The code that is
    // executed upon reception of the callbacks must be also be updated
    // to perform the desired functionality.

    Store(0x00000000, PARM)         // No callbacks supported

    If(LEqual(PFLV,FMBL))
    {
      Store(0x000F87FD, PARM)         // Mobile
    }
    If(LEqual(PFLV,FDTP))
    {
      Store(0x000F87BD, PARM)         // Desktop
    }

    Store(Zero, GESF)               // Clear the exit parameter
    Return(SUCC)                    // "Success"
  }

  // BIOS POST Completion: Sub-function 1

  If (LEqual(GESF, 1))
  {
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // Pre-Hires Set Mode: Sub-function 3

  If (LEqual(GESF, 3))
  {
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // Post-Hires Set Mode: Sub-function 4

  If (LEqual(GESF, 4))
  {
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // Display Switch: Sub-function 5

  If (LEqual(GESF, 5))
  {
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // Set TV format: Sub-function 6

  If (LEqual(GESF, 6))
  {

    //<TODO> If implemented, the input values must be saved into
    // non-volatile storage for parsing during the next boot.  The
    // following Sample code is Intel validated implementation.

    Store(And(PARM, 0x0F), ITVF)
    Store(ShiftRight(And(PARM, 0xF0), 4), ITVM)
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)
  }

  // Adapter Power State: Sub-function 7

  If (LEqual(GESF, 7))
  {

    // Upon notification from driver that the Adapter Power State = D0,
    // check if previous lid event failed.  If it did, retry the lid
    // event here.
    If(LEqual(PARM, 0))
    {
      Store(CLID, Local0)
      If(And(0x80000000,Local0))
      {
        And(CLID, 0x0000000F, CLID)
        GLID(CLID)
      }
    }
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // Display Power State: Sub-function 8

  If (LEqual(GESF, 8))
  {
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // Set Boot Display: Sub-function 9

  If (LEqual(GESF, 9))
  {

    //<TODO> An OEM may elect to implement this method.  In that case,
    // the input values must be saved into non-volatile storage for
    // parsing during the next boot.  The following Sample code is Intel
    // validated implementation.

    And(PARM, 0xFF, IBTT)           // Save the boot display to NVS
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Reserved, "Critical failure"
  }

  // Set Panel Details: Sub-function 10 (0Ah)

  If (LEqual(GESF, 10))
  {

    //<TODO> An OEM may elect to implement this method.  In that case,
    // the input values must be saved into non-volatile storage for
    // parsing during the next boot.  The following Sample code is Intel
    // validated implementation.

    // Set the panel-related NVRAM variables based the input from the driver.

    And(PARM, 0xFF, IPSC)

    // Change panel type if a change is requested by the driver (Change if
    // panel type input is non-zero).  Zero=No change requested.

    If(And(ShiftRight(PARM, 8), 0xFF))
    {
      And(ShiftRight(PARM, 8), 0xFF, IPAT)
      Decrement(IPAT)         // 0 = no change, so fit to CMOS map
    }
    And(ShiftRight(PARM, 18), 0x3, IBLC)
    And(ShiftRight(PARM, 20), 0x7, IBIA)
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Success
  }

  // Set Internal Graphics: Sub-function 11 (0Bh)

  If (LEqual(GESF, 11))
  {

    //<TODO> An OEM may elect to implement this method.  In that case,
    // the input values must be saved into non-volatile storage for
    // parsing during the next boot.  The following Sample code is Intel
    // validated implementation.

    And(ShiftRight(PARM, 1), 1, IF1E) // Program the function 1 option

    // Fixed memory/DVMT memory

    And(ShiftRight(PARM, 17), 0xF, IDMS) // Program DVMT/fixed memory size

    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Success
  }

  // Post-Hires to DOS FS: Sub-function 16 (10h)

  If (LEqual(GESF, 16))
  {
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // APM Complete:  Sub-function 17 (11h)

  If (LEqual(GESF, 17))
  {

    Store(ShiftLeft(LIDS, 8), PARM) // Report the lid state
    Add(PARM, 0x100, PARM)          // Adjust the lid state, 0 = Unknown

    Store(Zero, GESF)               // Clear the exit parameter
    Return(SUCC)                    // Not supported, but no failure
  }

  // Set Spread Spectrum Clocks: Sub-function 18 (12h)

  If (LEqual(GESF, 18))
  {

    //<TODO> An OEM may elect to implement this method.  In that case,
    // the input values must be saved into non-volatile storage for
    // parsing during the next boot.  The following Sample code is Intel
    // validated implementation.

    If(And(PARM, 1))
    {
      If(LEqual(ShiftRight(PARM, 1), 1))
      {
        Store(1, ISSC)  // Enable HW SSC, only for clock 1
      }
      Else
      {
        Store(Zero, GESF)
        Return(CRIT)    // Failure, as the SSC clock must be 1
      }
    }
    Else
    {
      Store(0, ISSC)          // Disable SSC
    }
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Success
  }

  // Post VBE/PM Callback: Sub-function 19 (13h)

  If (LEqual(GESF, 19))
  {
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Not supported, but no failure
  }

  // Set PAVP Data: Sub-function 20 (14h)

  If (LEqual(GESF, 20))
  {
    And(PARM, 0xF, PAVP)    // Store PAVP info
    Store(Zero, GESF)               // Clear the exit parameter
    Store(Zero, PARM)
    Return(SUCC)                    // Success
  }

  // A call to a reserved "System BIOS callbacks" function was received

  Store(Zero, GESF)                     // Clear the exit parameter
  Return(SUCC)                          // Reserved, "Critical failure"
}