/** @file

  Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>

  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#ifndef _MMCHS_H_
#define _MMCHS_H_

#include <Uefi.h>

#include <Library/BaseLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/OmapLib.h>
#include <Library/OmapDmaLib.h>
#include <Library/DmaLib.h>

#include <Protocol/EmbeddedExternalDevice.h>
#include <Protocol/BlockIo.h>
#include <Protocol/DevicePath.h>

#include <Omap3530/Omap3530.h>
#include <TPS65950.h>

#define MAX_RETRY_COUNT  (100*5)

#define HCS               BIT30 //Host capacity support/1 = Supporting high capacity
#define CCS               BIT30 //Card capacity status/1 = High capacity card
typedef struct {
  UINT32  Reserved0:   7; // 0
  UINT32  V170_V195:   1; // 1.70V - 1.95V
  UINT32  V200_V260:   7; // 2.00V - 2.60V
  UINT32  V270_V360:   9; // 2.70V - 3.60V
  UINT32  RESERVED_1:  5; // Reserved
  UINT32  AccessMode:  2; // 00b (byte mode), 10b (sector mode)
  UINT32  Busy:        1; // This bit is set to LOW if the card has not finished the power up routine
}OCR;

typedef struct {
  UINT32  NOT_USED;   // 1 [0:0]
  UINT32  CRC;        // CRC7 checksum [7:1]
  UINT32  MDT;        // Manufacturing date [19:8]
  UINT32  RESERVED_1; // Reserved [23:20]
  UINT32  PSN;        // Product serial number [55:24]
  UINT8   PRV;        // Product revision [63:56]
  UINT8   PNM[5];     // Product name [64:103]
  UINT16  OID;        // OEM/Application ID [119:104]
  UINT8   MID;        // Manufacturer ID [127:120]
}CID;

typedef struct {
  UINT8   NOT_USED:           1; // Not used, always 1 [0:0]
  UINT8   CRC:                7; // CRC [7:1]

  UINT8   RESERVED_1:         2; // Reserved [9:8]
  UINT8   FILE_FORMAT:        2; // File format [11:10]
  UINT8   TMP_WRITE_PROTECT:  1; // Temporary write protection [12:12]
  UINT8   PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
  UINT8   COPY:               1; // Copy flag (OTP) [14:14]
  UINT8   FILE_FORMAT_GRP:    1; // File format group [15:15]

  UINT16  RESERVED_2:         5; // Reserved [20:16]
  UINT16  WRITE_BL_PARTIAL:   1; // Partial blocks for write allowed [21:21]
  UINT16  WRITE_BL_LEN:       4; // Max. write data block length [25:22]
  UINT16  R2W_FACTOR:         3; // Write speed factor [28:26]
  UINT16  RESERVED_3:         2; // Reserved [30:29]
  UINT16  WP_GRP_ENABLE:      1; // Write protect group enable [31:31]

  UINT32  WP_GRP_SIZE:        7; // Write protect group size [38:32]
  UINT32  SECTOR_SIZE:        7; // Erase sector size [45:39]
  UINT32  ERASE_BLK_EN:       1; // Erase single block enable [46:46]
  UINT32  C_SIZE_MULT:        3; // Device size multiplier [49:47]
  UINT32  VDD_W_CURR_MAX:     3; // Max. write current @ VDD max [52:50]
  UINT32  VDD_W_CURR_MIN:     3; // Max. write current @ VDD min [55:53]
  UINT32  VDD_R_CURR_MAX:     3; // Max. read current @ VDD max [58:56]
  UINT32  VDD_R_CURR_MIN:     3; // Max. read current @ VDD min [61:59]
  UINT32  C_SIZELow2:         2; // Device size [63:62]

  UINT32  C_SIZEHigh10:       10;// Device size [73:64]
  UINT32  RESERVED_4:         2; // Reserved [75:74]
  UINT32  DSR_IMP:            1; // DSR implemented [76:76]
  UINT32  READ_BLK_MISALIGN:  1; // Read block misalignment [77:77]
  UINT32  WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
  UINT32  READ_BL_PARTIAL:    1; // Partial blocks for read allowed [79:79]
  UINT32  READ_BL_LEN:        4; // Max. read data block length [83:80]
  UINT32  CCC:                12;// Card command classes [95:84]

  UINT8   TRAN_SPEED          ;  // Max. bus clock frequency [103:96]
  UINT8   NSAC                ;  // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
  UINT8   TAAC                ;  // Data read access-time 1 [119:112]

  UINT8   RESERVED_5:         6; // Reserved [125:120]
  UINT8   CSD_STRUCTURE:      2; // CSD structure [127:126]
}CSD;

typedef struct {
  UINT8   NOT_USED:           1; // Not used, always 1 [0:0]
  UINT8   CRC:                7; // CRC [7:1]
  UINT8   RESERVED_1:         2; // Reserved [9:8]
  UINT8   FILE_FORMAT:        2; // File format [11:10]
  UINT8   TMP_WRITE_PROTECT:  1; // Temporary write protection [12:12]
  UINT8   PERM_WRITE_PROTECT: 1; // Permanent write protection [13:13]
  UINT8   COPY:               1; // Copy flag (OTP) [14:14]
  UINT8   FILE_FORMAT_GRP:    1; // File format group [15:15]
  UINT16  RESERVED_2:         5; // Reserved [20:16]
  UINT16  WRITE_BL_PARTIAL:   1; // Partial blocks for write allowed [21:21]
  UINT16  WRITE_BL_LEN:       4; // Max. write data block length [25:22]
  UINT16  R2W_FACTOR:         3; // Write speed factor [28:26]
  UINT16  RESERVED_3:         2; // Reserved [30:29]
  UINT16  WP_GRP_ENABLE:      1; // Write protect group enable [31:31]
  UINT16  WP_GRP_SIZE:        7; // Write protect group size [38:32]
  UINT16  SECTOR_SIZE:        7; // Erase sector size [45:39]
  UINT16  ERASE_BLK_EN:       1; // Erase single block enable [46:46]
  UINT16  RESERVED_4:         1; // Reserved [47:47]
  UINT32  C_SIZELow16:        16;// Device size [69:48]
  UINT32  C_SIZEHigh6:        6; // Device size [69:48]
  UINT32  RESERVED_5:         6; // Reserved [75:70]
  UINT32  DSR_IMP:            1; // DSR implemented [76:76]
  UINT32  READ_BLK_MISALIGN:  1; // Read block misalignment [77:77]
  UINT32  WRITE_BLK_MISALIGN: 1; // Write block misalignment [78:78]
  UINT32  READ_BL_PARTIAL:    1; // Partial blocks for read allowed [79:79]
  UINT16  READ_BL_LEN:        4; // Max. read data block length [83:80]
  UINT16  CCC:                12;// Card command classes [95:84]
  UINT8   TRAN_SPEED          ;  // Max. bus clock frequency [103:96]
  UINT8   NSAC                ;  // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]
  UINT8   TAAC                ;  // Data read access-time 1 [119:112]
  UINT8   RESERVED_6:         6; // 0 [125:120]
  UINT8   CSD_STRUCTURE:      2; // CSD structure [127:126]
}CSD_SDV2;

typedef enum {
  UNKNOWN_CARD,
  MMC_CARD,              //MMC card
  SD_CARD,               //SD 1.1 card
  SD_CARD_2,             //SD 2.0 or above standard card
  SD_CARD_2_HIGH         //SD 2.0 or above high capacity card
} CARD_TYPE;

typedef enum {
  READ,
  WRITE
} OPERATION_TYPE;

typedef struct  {
  UINT16    RCA;
  UINTN     BlockSize;
  UINTN     NumBlocks;
  UINTN     ClockFrequencySelect;
  CARD_TYPE CardType;
  OCR       OCRData;
  CID       CIDData;
  CSD       CSDData;
} CARD_INFO;

EFI_STATUS
DetectCard (
  VOID
  );

extern EFI_BLOCK_IO_PROTOCOL gBlockIo;

#endif