/** @file
Implementation of SMM CPU Services Protocol.

Copyright (c) 2011 - 2023, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "PiSmmCpuDxeSmm.h"

//
// SMM CPU Service Protocol instance
//
EFI_SMM_CPU_SERVICE_PROTOCOL  mSmmCpuService = {
  SmmGetProcessorInfo,
  SmmSwitchBsp,
  SmmAddProcessor,
  SmmRemoveProcessor,
  SmmWhoAmI,
  SmmRegisterExceptionHandler
};

//
// EDKII SMM CPU Rendezvous Service Protocol instance
//
EDKII_SMM_CPU_RENDEZVOUS_PROTOCOL  mSmmCpuRendezvousService = {
  SmmCpuRendezvous
};

/**
  Gets processor information on the requested processor at the instant this call is made.

  @param[in]  This                 A pointer to the EFI_SMM_CPU_SERVICE_PROTOCOL instance.
  @param[in]  ProcessorNumber      The handle number of processor.
  @param[out] ProcessorInfoBuffer  A pointer to the buffer where information for
                                   the requested processor is deposited.

  @retval EFI_SUCCESS             Processor information was returned.
  @retval EFI_INVALID_PARAMETER   ProcessorInfoBuffer is NULL.
  @retval EFI_INVALID_PARAMETER   ProcessorNumber is invalid.
  @retval EFI_NOT_FOUND           The processor with the handle specified by
                                  ProcessorNumber does not exist in the platform.

**/
EFI_STATUS
EFIAPI
SmmGetProcessorInfo (
  IN CONST EFI_SMM_CPU_SERVICE_PROTOCOL  *This,
  IN       UINTN                         ProcessorNumber,
  OUT      EFI_PROCESSOR_INFORMATION     *ProcessorInfoBuffer
  )
{
  //
  // Check parameter
  //
  if ((ProcessorNumber >= mMaxNumberOfCpus) || (ProcessorInfoBuffer == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  if (gSmmCpuPrivate->ProcessorInfo[ProcessorNumber].ProcessorId == INVALID_APIC_ID) {
    return EFI_NOT_FOUND;
  }

  //
  // Fill in processor information
  //
  CopyMem (ProcessorInfoBuffer, &gSmmCpuPrivate->ProcessorInfo[ProcessorNumber], sizeof (EFI_PROCESSOR_INFORMATION));
  return EFI_SUCCESS;
}

/**
  This service switches the requested AP to be the BSP since the next SMI.

  @param[in] This             A pointer to the EFI_SMM_CPU_SERVICE_PROTOCOL instance.
  @param[in] ProcessorNumber  The handle number of AP that is to become the new BSP.

  @retval EFI_SUCCESS             BSP will be switched in next SMI.
  @retval EFI_UNSUPPORTED         Switching the BSP or a processor to be hot-removed is not supported.
  @retval EFI_NOT_FOUND           The processor with the handle specified by ProcessorNumber does not exist.
  @retval EFI_INVALID_PARAMETER   ProcessorNumber is invalid.
**/
EFI_STATUS
EFIAPI
SmmSwitchBsp (
  IN CONST EFI_SMM_CPU_SERVICE_PROTOCOL  *This,
  IN       UINTN                         ProcessorNumber
  )
{
  //
  // Check parameter
  //
  if (ProcessorNumber >= mMaxNumberOfCpus) {
    return EFI_INVALID_PARAMETER;
  }

  if (gSmmCpuPrivate->ProcessorInfo[ProcessorNumber].ProcessorId == INVALID_APIC_ID) {
    return EFI_NOT_FOUND;
  }

  if ((gSmmCpuPrivate->Operation[ProcessorNumber] != SmmCpuNone) ||
      (gSmst->CurrentlyExecutingCpu == ProcessorNumber))
  {
    return EFI_UNSUPPORTED;
  }

  //
  // Setting of the BSP for next SMI is pending until all SMI handlers are finished
  //
  gSmmCpuPrivate->Operation[ProcessorNumber] = SmmCpuSwitchBsp;
  return EFI_SUCCESS;
}

/**
  Notify that a processor was hot-added.

  @param[in] This                A pointer to the EFI_SMM_CPU_SERVICE_PROTOCOL instance.
  @param[in] ProcessorId         Local APIC ID of the hot-added processor.
  @param[out] ProcessorNumber    The handle number of the hot-added processor.

  @retval EFI_SUCCESS            The hot-addition of the specified processors was successfully notified.
  @retval EFI_UNSUPPORTED        Hot addition of processor is not supported.
  @retval EFI_NOT_FOUND          The processor with the handle specified by ProcessorNumber does not exist.
  @retval EFI_INVALID_PARAMETER  ProcessorNumber is invalid.
  @retval EFI_ALREADY_STARTED    The processor is already online in the system.
**/
EFI_STATUS
EFIAPI
SmmAddProcessor (
  IN CONST EFI_SMM_CPU_SERVICE_PROTOCOL  *This,
  IN       UINT64                        ProcessorId,
  OUT      UINTN                         *ProcessorNumber
  )
{
  UINTN  Index;

  if (!FeaturePcdGet (PcdCpuHotPlugSupport)) {
    return EFI_UNSUPPORTED;
  }

  //
  // Check parameter
  //
  if ((ProcessorNumber == NULL) || (ProcessorId == INVALID_APIC_ID)) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Check if the processor already exists
  //

  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
    if (gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId == ProcessorId) {
      return EFI_ALREADY_STARTED;
    }
  }

  //
  // Check CPU hot plug data. The CPU RAS handler should have created the mapping
  // of the APIC ID to SMBASE.
  //
  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
    if ((mCpuHotPlugData.ApicId[Index] == ProcessorId) &&
        (gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId == INVALID_APIC_ID))
    {
      gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId = ProcessorId;
      gSmmCpuPrivate->ProcessorInfo[Index].StatusFlag  = 0;
      GetProcessorLocationByApicId (
        (UINT32)ProcessorId,
        &gSmmCpuPrivate->ProcessorInfo[Index].Location.Package,
        &gSmmCpuPrivate->ProcessorInfo[Index].Location.Core,
        &gSmmCpuPrivate->ProcessorInfo[Index].Location.Thread
        );

      GetProcessorLocation2ByApicId (
        (UINT32)ProcessorId,
        &gSmmCpuPrivate->ProcessorInfo[Index].ExtendedInformation.Location2.Package,
        &gSmmCpuPrivate->ProcessorInfo[Index].ExtendedInformation.Location2.Die,
        &gSmmCpuPrivate->ProcessorInfo[Index].ExtendedInformation.Location2.Tile,
        &gSmmCpuPrivate->ProcessorInfo[Index].ExtendedInformation.Location2.Module,
        &gSmmCpuPrivate->ProcessorInfo[Index].ExtendedInformation.Location2.Core,
        &gSmmCpuPrivate->ProcessorInfo[Index].ExtendedInformation.Location2.Thread
        );

      *ProcessorNumber                 = Index;
      gSmmCpuPrivate->Operation[Index] = SmmCpuAdd;
      return EFI_SUCCESS;
    }
  }

  return EFI_INVALID_PARAMETER;
}

/**
  Notify that a processor was hot-removed.

  @param[in] This                A pointer to the EFI_SMM_CPU_SERVICE_PROTOCOL instance.
  @param[in] ProcessorNumber     The handle number of the hot-added processor.

  @retval EFI_SUCCESS            The hot-removal of the specified processors was successfully notified.
  @retval EFI_UNSUPPORTED        Hot removal of processor is not supported.
  @retval EFI_UNSUPPORTED        Hot removal of BSP is not supported.
  @retval EFI_UNSUPPORTED        Hot removal of a processor with pending hot-plug operation is not supported.
  @retval EFI_INVALID_PARAMETER  ProcessorNumber is invalid.
**/
EFI_STATUS
EFIAPI
SmmRemoveProcessor (
  IN CONST EFI_SMM_CPU_SERVICE_PROTOCOL  *This,
  IN       UINTN                         ProcessorNumber
  )
{
  if (!FeaturePcdGet (PcdCpuHotPlugSupport)) {
    return EFI_UNSUPPORTED;
  }

  //
  // Check parameter
  //
  if ((ProcessorNumber >= mMaxNumberOfCpus) ||
      (gSmmCpuPrivate->ProcessorInfo[ProcessorNumber].ProcessorId == INVALID_APIC_ID))
  {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Can't remove BSP
  //
  if (ProcessorNumber == gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) {
    return EFI_UNSUPPORTED;
  }

  if (gSmmCpuPrivate->Operation[ProcessorNumber] != SmmCpuNone) {
    return EFI_UNSUPPORTED;
  }

  gSmmCpuPrivate->ProcessorInfo[ProcessorNumber].ProcessorId = INVALID_APIC_ID;
  mCpuHotPlugData.ApicId[ProcessorNumber]                    = INVALID_APIC_ID;

  //
  // Removal of the processor from the CPU list is pending until all SMI handlers are finished
  //
  gSmmCpuPrivate->Operation[ProcessorNumber] = SmmCpuRemove;
  return EFI_SUCCESS;
}

/**
  This return the handle number for the calling processor.

  @param[in] This                 A pointer to the EFI_SMM_CPU_SERVICE_PROTOCOL instance.
  @param[out] ProcessorNumber      The handle number of currently executing processor.

  @retval EFI_SUCCESS             The current processor handle number was returned
                                  in ProcessorNumber.
  @retval EFI_INVALID_PARAMETER   ProcessorNumber is NULL.

**/
EFI_STATUS
EFIAPI
SmmWhoAmI (
  IN CONST EFI_SMM_CPU_SERVICE_PROTOCOL  *This,
  OUT      UINTN                         *ProcessorNumber
  )
{
  UINTN   Index;
  UINT64  ApicId;

  //
  // Check parameter
  //
  if (ProcessorNumber == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  ApicId = GetApicId ();

  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
    if (gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId == ApicId) {
      *ProcessorNumber = Index;
      return EFI_SUCCESS;
    }
  }

  //
  // This should not happen
  //
  ASSERT (FALSE);
  return EFI_NOT_FOUND;
}

/**
  Update the SMM CPU list per the pending operation.

  This function is called after return from SMI handlers.
**/
VOID
SmmCpuUpdate (
  VOID
  )
{
  UINTN  Index;

  //
  // Handle pending BSP switch operations
  //
  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
    if (gSmmCpuPrivate->Operation[Index] == SmmCpuSwitchBsp) {
      gSmmCpuPrivate->Operation[Index]    = SmmCpuNone;
      mSmmMpSyncData->SwitchBsp           = TRUE;
      mSmmMpSyncData->CandidateBsp[Index] = TRUE;
    }
  }

  //
  // Handle pending hot-add operations
  //
  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
    if (gSmmCpuPrivate->Operation[Index] == SmmCpuAdd) {
      gSmmCpuPrivate->Operation[Index] = SmmCpuNone;
      mNumberOfCpus++;
    }
  }

  //
  // Handle pending hot-remove operations
  //
  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
    if (gSmmCpuPrivate->Operation[Index] == SmmCpuRemove) {
      gSmmCpuPrivate->Operation[Index] = SmmCpuNone;
      mNumberOfCpus--;
    }
  }
}

/**
  Register exception handler.

  @param  This                  A pointer to the SMM_CPU_SERVICE_PROTOCOL instance.
  @param  ExceptionType         Defines which interrupt or exception to hook. Type EFI_EXCEPTION_TYPE and
                                the valid values for this parameter are defined in EFI_DEBUG_SUPPORT_PROTOCOL
                                of the UEFI 2.0 specification.
  @param  InterruptHandler      A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER
                                that is called when a processor interrupt occurs.
                                If this parameter is NULL, then the handler will be uninstalled.

  @retval EFI_SUCCESS           The handler for the processor interrupt was successfully installed or uninstalled.
  @retval EFI_ALREADY_STARTED   InterruptHandler is not NULL, and a handler for InterruptType was previously installed.
  @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not previously installed.
  @retval EFI_UNSUPPORTED       The interrupt specified by InterruptType is not supported.

**/
EFI_STATUS
EFIAPI
SmmRegisterExceptionHandler (
  IN EFI_SMM_CPU_SERVICE_PROTOCOL  *This,
  IN EFI_EXCEPTION_TYPE            ExceptionType,
  IN EFI_CPU_INTERRUPT_HANDLER     InterruptHandler
  )
{
  return RegisterCpuInterruptHandler (ExceptionType, InterruptHandler);
}

/**
  Initialize SMM CPU Services.

  It installs EFI SMM CPU Services Protocol.

  @param ImageHandle The firmware allocated handle for the EFI image.

  @retval EFI_SUCCESS    EFI SMM CPU Services Protocol was installed successfully.
  @retval OTHER          Fail to install Protocol.
**/
EFI_STATUS
InitializeSmmCpuServices (
  IN EFI_HANDLE  Handle
  )
{
  EFI_STATUS  Status;

  Status = gSmst->SmmInstallProtocolInterface (
                    &Handle,
                    &gEfiSmmCpuServiceProtocolGuid,
                    EFI_NATIVE_INTERFACE,
                    &mSmmCpuService
                    );
  ASSERT_EFI_ERROR (Status);
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Status = gSmst->SmmInstallProtocolInterface (
                    &Handle,
                    &gEdkiiSmmCpuRendezvousProtocolGuid,
                    EFI_NATIVE_INTERFACE,
                    &mSmmCpuRendezvousService
                    );
  ASSERT_EFI_ERROR (Status);
  return Status;
}

/**
  Wait for all processors enterring SMM until all CPUs are already synchronized or not.

  If BlockingMode is False, timeout value is zero.

  @param This          A pointer to the EDKII_SMM_CPU_RENDEZVOUS_PROTOCOL instance.
  @param BlockingMode  Blocking mode or non-blocking mode.

  @retval EFI_SUCCESS  All avaiable APs arrived.
  @retval EFI_TIMEOUT  Wait for all APs until timeout.

**/
EFI_STATUS
EFIAPI
SmmCpuRendezvous (
  IN EDKII_SMM_CPU_RENDEZVOUS_PROTOCOL  *This,
  IN BOOLEAN                            BlockingMode
  )
{
  EFI_STATUS  Status;

  //
  // Return success immediately if all CPUs are already synchronized.
  //
  if (mSmmMpSyncData->AllApArrivedWithException) {
    Status = EFI_SUCCESS;
    goto ON_EXIT;
  }

  if (!BlockingMode) {
    Status = EFI_TIMEOUT;
    goto ON_EXIT;
  }

  if ((mSmmMpSyncData->EffectiveSyncMode != SmmCpuSyncModeTradition) && !SmmCpuFeaturesNeedConfigureMtrrs ()) {
    //
    // There are some APs outside SMM, Wait for all avaiable APs to arrive.
    //
    SmmWaitForApArrival ();
    Status = mSmmMpSyncData->AllApArrivedWithException ? EFI_SUCCESS : EFI_TIMEOUT;
  } else {
    //
    // BSP has already waitted for APs to arrive SMM if SmmCpuSyncMode selected or need config MTRR.
    //
    Status = EFI_TIMEOUT;
  }

ON_EXIT:
  if (!mSmmMpSyncData->AllApArrivedWithException) {
    DEBUG ((DEBUG_INFO, "EdkiiSmmWaitForAllApArrival: Timeout to wait all APs arrival\n"));
  }

  return Status;
}