| #*************************************************************************** |
| # _ _ ____ _ |
| # Project ___| | | | _ \| | |
| # / __| | | | |_) | | |
| # | (__| |_| | _ <| |___ |
| # \___|\___/|_| \_\_____| |
| # |
| # Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al. |
| # |
| # This software is licensed as described in the file COPYING, which |
| # you should have received as part of this distribution. The terms |
| # are also available at https://curl.haxx.se/docs/copyright.html. |
| # |
| # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| # copies of the Software, and permit persons to whom the Software is |
| # furnished to do so, under the terms of the COPYING file. |
| # |
| # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| # KIND, either express or implied. |
| # |
| ########################################################################### |
| # Starter pipeline |
| # Start with a minimal pipeline that you can customize to build and deploy your code. |
| # Add steps that build, run tests, deploy, and more: |
| # https://aka.ms/yaml |
| |
| trigger: |
| branches: |
| include: |
| - 'master' |
| - '*/ci' |
| |
| pr: |
| branches: |
| include: |
| - 'master' |
| |
| stages: |
| |
| ########################################## |
| ### Linux jobs first |
| ########################################## |
| |
| - stage: linux |
| dependsOn: [] |
| jobs: |
| - job: ubuntu |
| # define defaults to make sure variables are always expanded/replaced |
| variables: |
| install: '' |
| configure: '' |
| tests: '' |
| timeoutInMinutes: 60 |
| pool: |
| vmImage: 'ubuntu-latest' |
| strategy: |
| matrix: |
| default: |
| name: default |
| configure: --enable-debug |
| disable_ipv6: |
| name: w/o IPv6 |
| configure: --disable-ipv6 |
| disable_http_smtp_imap: |
| name: w/o HTTP/SMTP/IMAP |
| configure: --disable-http --disable-smtp --disable-imap |
| disable_thredres: |
| name: sync resolver |
| configure: --disable-threaded-resolver |
| http_only: |
| name: HTTP only |
| configure: --disable-dict --disable-file --disable-ftp --disable-gopher --disable-imap --disable-ldap --disable-pop3 --disable-rtmp --disable-rtsp --disable-scp --disable-sftp --disable-smb --disable-smtp --disable-telnet --disable-tftp |
| torture: |
| name: torture |
| install: libnghttp2-dev |
| configure: --enable-debug --disable-shared --disable-threaded-resolver --enable-alt-svc |
| tests: -n -t --shallow=40 !FTP |
| steps: |
| - script: sudo apt-get update && sudo apt-get install -y stunnel4 python-impacket libzstd-dev libbrotli-dev $(install) |
| displayName: 'apt install' |
| |
| - script: ./buildconf && ./configure --enable-warnings --enable-werror $(configure) |
| displayName: 'configure $(name)' |
| |
| - script: make |
| displayName: 'make' |
| |
| - script: make test-nonflaky |
| displayName: 'test' |
| env: |
| AZURE_ACCESS_TOKEN: "$(System.AccessToken)" |
| TFLAGS: "-r $(tests)" |
| |
| ########################################## |
| ### Windows jobs below |
| ########################################## |
| |
| - stage: windows |
| dependsOn: [] |
| variables: |
| agent.preferPowerShellOnContainers: true |
| jobs: |
| - job: windows |
| # define defaults to make sure variables are always expanded/replaced |
| variables: |
| container_img: '' |
| container_cmd: '' |
| configure: '' |
| tests: '' |
| timeoutInMinutes: 120 |
| pool: |
| vmImage: 'windows-2019' |
| strategy: |
| matrix: |
| msys2_mingw32_debug_openssl: |
| name: 32-bit OpenSSL and MQTT |
| container_img: mback2k/curl-docker-winbuildenv-msys2-mingw32:ltsc2019 |
| container_cmd: C:\msys64\usr\bin\sh |
| prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2 |
| configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-mqtt --with-libssh2 |
| tests: ~612 ~1056 ~1299 !SCP |
| msys2_mingw64_debug_openssl: |
| name: 64-bit OpenSSL and MQTT |
| container_img: mback2k/curl-docker-winbuildenv-msys2-mingw64:ltsc2019 |
| container_cmd: C:\msys64\usr\bin\sh |
| prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2 |
| configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-mqtt --with-libssh2 |
| tests: ~612 ~1056 ~1299 !SCP |
| msys1_mingw_debug_openssl: |
| name: 32-bit OpenSSL (legacy) |
| container_img: mback2k/curl-docker-winbuildenv-msys1-mingw:ltsc2019 |
| container_cmd: C:\MinGW\msys\1.0\bin\sh |
| configure: --host=i686-pc-mingw32 --build=i686-pc-mingw32 --prefix=/mingw --enable-debug |
| tests: ~203 ~1056 ~1143 |
| msys1_mingw32_debug_openssl: |
| name: 32-bit OpenSSL w/o zlib |
| container_img: mback2k/curl-docker-winbuildenv-msys1-mingw32:ltsc2019 |
| container_cmd: C:\MinGW\msys\1.0\bin\sh |
| configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --without-zlib |
| tests: ~203 ~1056 ~1143 ~1299 |
| msys1_mingw64_debug_openssl: |
| name: 64-bit OpenSSL w/o zlib |
| container_img: mback2k/curl-docker-winbuildenv-msys1-mingw64:ltsc2019 |
| container_cmd: C:\MinGW\msys\1.0\bin\sh |
| configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --without-zlib |
| tests: ~203 ~1056 ~1143 ~1299 |
| msys2_mingw32_debug_schannel: |
| name: 32-bit Schannel/SSPI/WinIDN |
| container_img: mback2k/curl-docker-winbuildenv-msys2-mingw32:ltsc2019 |
| container_cmd: C:\msys64\usr\bin\sh |
| prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-i686-libssh2 |
| configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --without-ssl --with-schannel --with-winidn --with-libssh2 |
| tests: ~165 ~310 ~612 ~1013 ~1056 ~1299 ~1448 ~2034 ~2037 ~2041 ~2046 ~2047 ~3000 ~3001 !SCP |
| msys2_mingw64_debug_schannel: |
| name: 64-bit Schannel/SSPI/WinIDN |
| container_img: mback2k/curl-docker-winbuildenv-msys2-mingw64:ltsc2019 |
| container_cmd: C:\msys64\usr\bin\sh |
| prepare: pacman -S --needed --noconfirm --noprogressbar libssh2-devel mingw-w64-x86_64-libssh2 |
| configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --without-ssl --with-schannel --with-winidn --with-libssh2 |
| tests: ~165 ~310 ~612 ~1013 ~1056 ~1299 ~1448 ~2034 ~2037 ~2041 ~2046 ~2047 ~3000 ~3001 !SCP |
| msys1_mingw_debug_schannel: |
| name: 32-bit Schannel/SSPI/WinIDN (legacy) |
| container_img: mback2k/curl-docker-winbuildenv-msys1-mingw:ltsc2019 |
| container_cmd: C:\MinGW\msys\1.0\bin\sh |
| configure: --host=i686-pc-mingw32 --build=i686-pc-mingw32 --prefix=/mingw --enable-debug --enable-sspi --without-ssl --with-schannel --with-winidn |
| tests: ~203 ~305 ~310 ~311 ~312 ~313 ~404 ~1013 ~1056 ~1143 ~2034 ~2035 ~2037 ~2038 ~2041 ~2042 ~2048 ~3000 ~3001 |
| msys1_mingw32_debug_schannel: |
| name: 32-bit Schannel/SSPI/WinIDN w/o zlib |
| container_img: mback2k/curl-docker-winbuildenv-msys1-mingw32:ltsc2019 |
| container_cmd: C:\MinGW\msys\1.0\bin\sh |
| configure: --host=i686-w64-mingw32 --build=i686-w64-mingw32 --prefix=/mingw32 --enable-debug --enable-werror --enable-sspi --without-ssl --with-schannel --with-winidn --without-zlib |
| tests: ~203 ~310 ~1013 ~1056 ~1143 ~1299 ~2034 ~2037 ~2041 ~3000 ~3001 |
| msys1_mingw64_debug_schannel: |
| name: 64-bit Schannel/SSPI/WinIDN w/o zlib |
| container_img: mback2k/curl-docker-winbuildenv-msys1-mingw64:ltsc2019 |
| container_cmd: C:\MinGW\msys\1.0\bin\sh |
| configure: --host=x86_64-w64-mingw32 --build=x86_64-w64-mingw32 --prefix=/mingw64 --enable-debug --enable-werror --enable-sspi --without-ssl --with-schannel --with-winidn --without-zlib |
| tests: ~203 ~310 ~1013 ~1056 ~1143 ~1299 ~2034 ~2037 ~2041 ~3000 ~3001 |
| container: |
| image: $(container_img) |
| env: |
| MSYS2_PATH_TYPE: inherit |
| steps: |
| - script: $(container_cmd) -l -c "cd $(echo '%cd%') && $(prepare)" |
| displayName: 'prepare' |
| condition: variables.prepare |
| |
| - script: $(container_cmd) -l -c "cd $(echo '%cd%') && ./buildconf && ./configure $(configure)" |
| displayName: 'configure $(name)' |
| |
| - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make" |
| displayName: 'make' |
| |
| - script: $(container_cmd) -l -c "cd $(echo '%cd%') && make test-nonflaky" |
| displayName: 'test' |
| env: |
| AZURE_ACCESS_TOKEN: "$(System.AccessToken)" |
| TFLAGS: "-r $(tests)" |
