/***************************************************************************
 *                                  _   _ ____  _
 *  Project                     ___| | | |  _ \| |
 *                             / __| | | | |_) | |
 *                            | (__| |_| |  _ <| |___
 *                             \___|\___/|_| \_\_____|
 *
 * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 *
 * This software is licensed as described in the file COPYING, which
 * you should have received as part of this distribution. The terms
 * are also available at https://curl.haxx.se/docs/copyright.html.
 *
 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 * copies of the Software, and permit persons to whom the Software is
 * furnished to do so, under the terms of the COPYING file.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ***************************************************************************/

#include "curl_setup.h"

#if !defined(CURL_DISABLE_HTTP) && defined(USE_NTLM) && \
    defined(NTLM_WB_ENABLED)

/*
 * NTLM details:
 *
 * https://davenport.sourceforge.io/ntlm.html
 * https://www.innovation.ch/java/ntlm.html
 */

#define DEBUG_ME 0

#ifdef HAVE_SYS_WAIT_H
#include <sys/wait.h>
#endif
#ifdef HAVE_SIGNAL_H
#include <signal.h>
#endif
#ifdef HAVE_PWD_H
#include <pwd.h>
#endif

#include "urldata.h"
#include "sendf.h"
#include "select.h"
#include "vauth/ntlm.h"
#include "curl_ntlm_wb.h"
#include "url.h"
#include "strerror.h"
#include "strdup.h"
/* The last 3 #include files should be in this order */
#include "curl_printf.h"
#include "curl_memory.h"
#include "memdebug.h"

#if DEBUG_ME
# define DEBUG_OUT(x) x
#else
# define DEBUG_OUT(x) Curl_nop_stmt
#endif

/* Portable 'sclose_nolog' used only in child process instead of 'sclose'
   to avoid fooling the socket leak detector */
#if defined(HAVE_CLOSESOCKET)
#  define sclose_nolog(x)  closesocket((x))
#elif defined(HAVE_CLOSESOCKET_CAMEL)
#  define sclose_nolog(x)  CloseSocket((x))
#else
#  define sclose_nolog(x)  close((x))
#endif

void Curl_ntlm_wb_cleanup(struct connectdata *conn)
{
  if(conn->ntlm_auth_hlpr_socket != CURL_SOCKET_BAD) {
    sclose(conn->ntlm_auth_hlpr_socket);
    conn->ntlm_auth_hlpr_socket = CURL_SOCKET_BAD;
  }

  if(conn->ntlm_auth_hlpr_pid) {
    int i;
    for(i = 0; i < 4; i++) {
      pid_t ret = waitpid(conn->ntlm_auth_hlpr_pid, NULL, WNOHANG);
      if(ret == conn->ntlm_auth_hlpr_pid || errno == ECHILD)
        break;
      switch(i) {
      case 0:
        kill(conn->ntlm_auth_hlpr_pid, SIGTERM);
        break;
      case 1:
        /* Give the process another moment to shut down cleanly before
           bringing down the axe */
        Curl_wait_ms(1);
        break;
      case 2:
        kill(conn->ntlm_auth_hlpr_pid, SIGKILL);
        break;
      case 3:
        break;
      }
    }
    conn->ntlm_auth_hlpr_pid = 0;
  }

  free(conn->challenge_header);
  conn->challenge_header = NULL;
  free(conn->response_header);
  conn->response_header = NULL;
}

static CURLcode ntlm_wb_init(struct connectdata *conn, const char *userp)
{
  curl_socket_t sockfds[2];
  pid_t child_pid;
  const char *username;
  char *slash, *domain = NULL;
  const char *ntlm_auth = NULL;
  char *ntlm_auth_alloc = NULL;
#if defined(HAVE_GETPWUID_R) && defined(HAVE_GETEUID)
  struct passwd pw, *pw_res;
  char pwbuf[1024];
#endif
  int error;

  /* Return if communication with ntlm_auth already set up */
  if(conn->ntlm_auth_hlpr_socket != CURL_SOCKET_BAD ||
     conn->ntlm_auth_hlpr_pid)
    return CURLE_OK;

  username = userp;
  /* The real ntlm_auth really doesn't like being invoked with an
     empty username. It won't make inferences for itself, and expects
     the client to do so (mostly because it's really designed for
     servers like squid to use for auth, and client support is an
     afterthought for it). So try hard to provide a suitable username
     if we don't already have one. But if we can't, provide the
     empty one anyway. Perhaps they have an implementation of the
     ntlm_auth helper which *doesn't* need it so we might as well try */
  if(!username || !username[0]) {
    username = getenv("NTLMUSER");
    if(!username || !username[0])
      username = getenv("LOGNAME");
    if(!username || !username[0])
      username = getenv("USER");
#if defined(HAVE_GETPWUID_R) && defined(HAVE_GETEUID)
    if((!username || !username[0]) &&
       !getpwuid_r(geteuid(), &pw, pwbuf, sizeof(pwbuf), &pw_res) &&
       pw_res) {
      username = pw.pw_name;
    }
#endif
    if(!username || !username[0])
      username = userp;
  }
  slash = strpbrk(username, "\\/");
  if(slash) {
    domain = strdup(username);
    if(!domain)
      return CURLE_OUT_OF_MEMORY;
    slash = domain + (slash - username);
    *slash = '\0';
    username = username + (slash - domain) + 1;
  }

  /* For testing purposes, when DEBUGBUILD is defined and environment
     variable CURL_NTLM_WB_FILE is set a fake_ntlm is used to perform
     NTLM challenge/response which only accepts commands and output
     strings pre-written in test case definitions */
#ifdef DEBUGBUILD
  ntlm_auth_alloc = curl_getenv("CURL_NTLM_WB_FILE");
  if(ntlm_auth_alloc)
    ntlm_auth = ntlm_auth_alloc;
  else
#endif
    ntlm_auth = NTLM_WB_FILE;

  if(access(ntlm_auth, X_OK) != 0) {
    error = ERRNO;
    failf(conn->data, "Could not access ntlm_auth: %s errno %d: %s",
          ntlm_auth, error, Curl_strerror(conn, error));
    goto done;
  }

  if(socketpair(AF_UNIX, SOCK_STREAM, 0, sockfds)) {
    error = ERRNO;
    failf(conn->data, "Could not open socket pair. errno %d: %s",
          error, Curl_strerror(conn, error));
    goto done;
  }

  child_pid = fork();
  if(child_pid == -1) {
    error = ERRNO;
    sclose(sockfds[0]);
    sclose(sockfds[1]);
    failf(conn->data, "Could not fork. errno %d: %s",
          error, Curl_strerror(conn, error));
    goto done;
  }
  else if(!child_pid) {
    /*
     * child process
     */

    /* Don't use sclose in the child since it fools the socket leak detector */
    sclose_nolog(sockfds[0]);
    if(dup2(sockfds[1], STDIN_FILENO) == -1) {
      error = ERRNO;
      failf(conn->data, "Could not redirect child stdin. errno %d: %s",
            error, Curl_strerror(conn, error));
      exit(1);
    }

    if(dup2(sockfds[1], STDOUT_FILENO) == -1) {
      error = ERRNO;
      failf(conn->data, "Could not redirect child stdout. errno %d: %s",
            error, Curl_strerror(conn, error));
      exit(1);
    }

    if(domain)
      execl(ntlm_auth, ntlm_auth,
            "--helper-protocol", "ntlmssp-client-1",
            "--use-cached-creds",
            "--username", username,
            "--domain", domain,
            NULL);
    else
      execl(ntlm_auth, ntlm_auth,
            "--helper-protocol", "ntlmssp-client-1",
            "--use-cached-creds",
            "--username", username,
            NULL);

    error = ERRNO;
    sclose_nolog(sockfds[1]);
    failf(conn->data, "Could not execl(). errno %d: %s",
          error, Curl_strerror(conn, error));
    exit(1);
  }

  sclose(sockfds[1]);
  conn->ntlm_auth_hlpr_socket = sockfds[0];
  conn->ntlm_auth_hlpr_pid = child_pid;
  free(domain);
  free(ntlm_auth_alloc);
  return CURLE_OK;

done:
  free(domain);
  free(ntlm_auth_alloc);
  return CURLE_REMOTE_ACCESS_DENIED;
}

static CURLcode ntlm_wb_response(struct connectdata *conn,
                                 const char *input, curlntlm state)
{
  char *buf = malloc(NTLM_BUFSIZE);
  size_t len_in = strlen(input), len_out = 0;

  if(!buf)
    return CURLE_OUT_OF_MEMORY;

  while(len_in > 0) {
    ssize_t written = swrite(conn->ntlm_auth_hlpr_socket, input, len_in);
    if(written == -1) {
      /* Interrupted by a signal, retry it */
      if(errno == EINTR)
        continue;
      /* write failed if other errors happen */
      goto done;
    }
    input += written;
    len_in -= written;
  }
  /* Read one line */
  while(1) {
    ssize_t size;
    char *newbuf;

    size = sread(conn->ntlm_auth_hlpr_socket, buf + len_out, NTLM_BUFSIZE);
    if(size == -1) {
      if(errno == EINTR)
        continue;
      goto done;
    }
    else if(size == 0)
      goto done;

    len_out += size;
    if(buf[len_out - 1] == '\n') {
      buf[len_out - 1] = '\0';
      break;
    }
    newbuf = Curl_saferealloc(buf, len_out + NTLM_BUFSIZE);
    if(!newbuf)
      return CURLE_OUT_OF_MEMORY;

    buf = newbuf;
  }

  /* Samba/winbind installed but not configured */
  if(state == NTLMSTATE_TYPE1 &&
     len_out == 3 &&
     buf[0] == 'P' && buf[1] == 'W')
    goto done;
  /* invalid response */
  if(len_out < 4)
    goto done;
  if(state == NTLMSTATE_TYPE1 &&
     (buf[0]!='Y' || buf[1]!='R' || buf[2]!=' '))
    goto done;
  if(state == NTLMSTATE_TYPE2 &&
     (buf[0]!='K' || buf[1]!='K' || buf[2]!=' ') &&
     (buf[0]!='A' || buf[1]!='F' || buf[2]!=' '))
    goto done;

  conn->response_header = aprintf("NTLM %.*s", len_out - 4, buf + 3);
  free(buf);
  return CURLE_OK;
done:
  free(buf);
  return CURLE_REMOTE_ACCESS_DENIED;
}

/*
 * This is for creating ntlm header output by delegating challenge/response
 * to Samba's winbind daemon helper ntlm_auth.
 */
CURLcode Curl_output_ntlm_wb(struct connectdata *conn,
                              bool proxy)
{
  /* point to the address of the pointer that holds the string to send to the
     server, which is for a plain host or for a HTTP proxy */
  char **allocuserpwd;
  /* point to the name and password for this */
  const char *userp;
  /* point to the correct struct with this */
  struct ntlmdata *ntlm;
  struct auth *authp;

  CURLcode res = CURLE_OK;
  char *input;

  DEBUGASSERT(conn);
  DEBUGASSERT(conn->data);

  if(proxy) {
    allocuserpwd = &conn->allocptr.proxyuserpwd;
    userp = conn->http_proxy.user;
    ntlm = &conn->proxyntlm;
    authp = &conn->data->state.authproxy;
  }
  else {
    allocuserpwd = &conn->allocptr.userpwd;
    userp = conn->user;
    ntlm = &conn->ntlm;
    authp = &conn->data->state.authhost;
  }
  authp->done = FALSE;

  /* not set means empty */
  if(!userp)
    userp="";

  switch(ntlm->state) {
  case NTLMSTATE_TYPE1:
  default:
    /* Use Samba's 'winbind' daemon to support NTLM authentication,
     * by delegating the NTLM challenge/response protocal to a helper
     * in ntlm_auth.
     * http://devel.squid-cache.org/ntlm/squid_helper_protocol.html
     * https://www.samba.org/samba/docs/man/manpages-3/winbindd.8.html
     * https://www.samba.org/samba/docs/man/manpages-3/ntlm_auth.1.html
     * Preprocessor symbol 'NTLM_WB_ENABLED' is defined when this
     * feature is enabled and 'NTLM_WB_FILE' symbol holds absolute
     * filename of ntlm_auth helper.
     * If NTLM authentication using winbind fails, go back to original
     * request handling process.
     */
    /* Create communication with ntlm_auth */
    res = ntlm_wb_init(conn, userp);
    if(res)
      return res;
    res = ntlm_wb_response(conn, "YR\n", ntlm->state);
    if(res)
      return res;

    free(*allocuserpwd);
    *allocuserpwd = aprintf("%sAuthorization: %s\r\n",
                            proxy ? "Proxy-" : "",
                            conn->response_header);
    DEBUG_OUT(fprintf(stderr, "**** Header %s\n ", *allocuserpwd));
    free(conn->response_header);
    conn->response_header = NULL;
    break;
  case NTLMSTATE_TYPE2:
    input = aprintf("TT %s\n", conn->challenge_header);
    if(!input)
      return CURLE_OUT_OF_MEMORY;
    res = ntlm_wb_response(conn, input, ntlm->state);
    free(input);
    input = NULL;
    if(res)
      return res;

    free(*allocuserpwd);
    *allocuserpwd = aprintf("%sAuthorization: %s\r\n",
                            proxy ? "Proxy-" : "",
                            conn->response_header);
    DEBUG_OUT(fprintf(stderr, "**** %s\n ", *allocuserpwd));
    ntlm->state = NTLMSTATE_TYPE3; /* we sent a type-3 */
    authp->done = TRUE;
    Curl_ntlm_wb_cleanup(conn);
    break;
  case NTLMSTATE_TYPE3:
    /* connection is already authenticated,
     * don't send a header in future requests */
    free(*allocuserpwd);
    *allocuserpwd=NULL;
    authp->done = TRUE;
    break;
  }

  return CURLE_OK;
}

#endif /* !CURL_DISABLE_HTTP && USE_NTLM && NTLM_WB_ENABLED */