projects/generate.bat - third_party/curl - Git at Google

 @echo off
 rem ***************************************************************************
 rem *                                  _   _ ____  _
 rem *  Project                     ___| | | |  _ \| |
 rem *                             / __| | | | |_) | |
 rem *                            | (__| |_| |  _ <| |___
 rem *                             \___|\___/|_| \_\_____|
 rem *
 rem * Copyright (C) 2014 - 2015, Steve Holme, <steve_holme@hotmail.com>.
 rem *
 rem * This software is licensed as described in the file COPYING, which
 rem * you should have received as part of this distribution. The terms
 rem * are also available at http://curl.haxx.se/docs/copyright.html.
 rem *
 rem * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 rem * copies of the Software, and permit persons to whom the Software is
 rem * furnished to do so, under the terms of the COPYING file.
 rem *
 rem * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 rem * KIND, either express or implied.
 rem *
 rem ***************************************************************************

 rem NOTES
 rem
 rem Do not set %ERRORLEVEL% to anything. %ERRORLEVEL% is a special variable
 rem that only contains errorlevel when %ERRORLEVEL% is not set. Same for %CD%.
 rem http://blogs.msdn.com/b/oldnewthing/archive/2008/09/26/8965755.aspx
 rem If you need to set the errorlevel do this instead: CALL :seterr [#]

 :begin
   rem Check we are running on a Windows NT derived OS
   if not "%OS%" == "Windows_NT" goto nodos

   rem Check we are not running on a network drive
   if "%~d0."=="\\." goto nonetdrv

   rem Switch to this batch file's directory
   cd /d "%~0\.." 1>NUL 2>&1

   rem Set our variables
   setlocal ENABLEEXTENSIONS
   set VERSION=ALL
   set MODE=GENERATE

   rem Detect programs. HAVE_<PROGNAME>
   rem When not found the variable is set undefined. The undefined pattern
   rem allows for statements like "if not defined HAVE_PERL (command)"
   groff --version <NUL 1>NUL 2>&1
   if %ERRORLEVEL% EQU 0 (set HAVE_GROFF=Y) else (set HAVE_GROFF=)
   nroff --version <NUL 1>NUL 2>&1
   if %ERRORLEVEL% EQU 0 (set HAVE_NROFF=Y) else (set HAVE_NROFF=)
   perl --version <NUL 1>NUL 2>&1
   if %ERRORLEVEL% EQU 0 (set HAVE_PERL=Y) else (set HAVE_PERL=)
   gzip --version <NUL 1>NUL 2>&1
   if %ERRORLEVEL% EQU 0 (set HAVE_GZIP=Y) else (set HAVE_GZIP=)

   rem Display the help
   if /i "%~1" == "-?" goto syntax
   if /i "%~1" == "-h" goto syntax
   if /i "%~1" == "-help" goto syntax

 :parseArgs
   if "%~1" == "" goto start

   if /i "%~1" == "vc6" (
     set VERSION=VC6
   ) else if /i "%~1" == "vc7" (
     set VERSION=VC7
   ) else if /i "%~1" == "vc7.1" (
     set VERSION=VC7.1
   ) else if /i "%~1" == "vc8" (
     set VERSION=VC8
   ) else if /i "%~1" == "vc9" (
     set VERSION=VC9
   ) else if /i "%~1" == "vc10" (
     set VERSION=VC10
   ) else if /i "%~1" == "vc11" (
     set VERSION=VC11
   ) else if /i "%~1" == "vc12" (
     set VERSION=VC12
   ) else if /i "%~1" == "-clean" (
     set MODE=CLEAN
   ) else (
     goto unknown
   )
   shift & goto parseArgs

 :start
   if "%MODE%" == "GENERATE" (
     echo.
     echo Generating prerequisite files
     CALL :gen_curlbuild
     if errorlevel 1 goto error
     CALL :gen_hugehelp
     if errorlevel 1 goto error
   ) else (
     echo.
     echo Removing prerequisite files
     call :clean ..\include\curl\curlbuild.h
     call :clean ..\src\tool_hugehelp.c
   )
   if "%VERSION%" == "VC6" goto vc6
   if "%VERSION%" == "VC7" goto vc7
   if "%VERSION%" == "VC7.1" goto vc71
   if "%VERSION%" == "VC8" goto vc8
   if "%VERSION%" == "VC9" goto vc9
   if "%VERSION%" == "VC10" goto vc10
   if "%VERSION%" == "VC11" goto vc11
   if "%VERSION%" == "VC12" goto vc12

 :vc6
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC6 project files
     call :generate dsp Windows\VC6\src\curlsrc.tmpl Windows\VC6\src\curlsrc.dsp
     call :generate dsp Windows\VC6\lib\libcurl.tmpl Windows\VC6\lib\libcurl.dsp
   ) else (
     echo Removing VC6 project files
     call :clean Windows\VC6\src\curlsrc.dsp
     call :clean Windows\VC6\lib\libcurl.dsp
   )

   if not "%VERSION%" == "ALL" goto success

 :vc7
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC7 project files
     call :generate vcproj1 Windows\VC7\src\curlsrc.tmpl Windows\VC7\src\curlsrc.vcproj
     call :generate vcproj1 Windows\VC7\lib\libcurl.tmpl Windows\VC7\lib\libcurl.vcproj
   ) else (
     echo Removing VC7 project files
     call :clean Windows\VC7\src\curlsrc.vcproj
     call :clean Windows\VC7\lib\libcurl.vcproj
   )

   if not "%VERSION%" == "ALL" goto success

 :vc71
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC7.1 project files
     call :generate vcproj1 Windows\VC7.1\src\curlsrc.tmpl Windows\VC7.1\src\curlsrc.vcproj
     call :generate vcproj1 Windows\VC7.1\lib\libcurl.tmpl Windows\VC7.1\lib\libcurl.vcproj
   ) else (
     echo Removing VC7.1 project files
     call :clean Windows\VC7.1\src\curlsrc.vcproj
     call :clean Windows\VC7.1\lib\libcurl.vcproj
   )

   if not "%VERSION%" == "ALL" goto success

 :vc8
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC8 project files
     call :generate vcproj2 Windows\VC8\src\curlsrc.tmpl Windows\VC8\src\curlsrc.vcproj
     call :generate vcproj2 Windows\VC8\lib\libcurl.tmpl Windows\VC8\lib\libcurl.vcproj
   ) else (
     echo Removing VC8 project files
     call :clean Windows\VC8\src\curlsrc.vcproj
     call :clean Windows\VC8\lib\libcurl.vcproj
   )

   if not "%VERSION%" == "ALL" goto success

 :vc9
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC9 project files
     call :generate vcproj2 Windows\VC9\src\curlsrc.tmpl Windows\VC9\src\curlsrc.vcproj
     call :generate vcproj2 Windows\VC9\lib\libcurl.tmpl Windows\VC9\lib\libcurl.vcproj
   ) else (
     echo Removing VC9 project files
     call :clean Windows\VC9\src\curlsrc.vcproj
     call :clean Windows\VC9\lib\libcurl.vcproj
   )

   if not "%VERSION%" == "ALL" goto success

 :vc10
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC10 project files
     call :generate vcxproj Windows\VC10\src\curlsrc.tmpl Windows\VC10\src\curlsrc.vcxproj
     call :generate vcxproj Windows\VC10\lib\libcurl.tmpl Windows\VC10\lib\libcurl.vcxproj
   ) else (
     echo Removing VC10 project files
     call :clean Windows\VC10\src\curlsrc.vcxproj
     call :clean Windows\VC10\lib\libcurl.vcxproj
   )

   if not "%VERSION%" == "ALL" goto success

 :vc11
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC11 project files
     call :generate vcxproj Windows\VC11\src\curlsrc.tmpl Windows\VC11\src\curlsrc.vcxproj
     call :generate vcxproj Windows\VC11\lib\libcurl.tmpl Windows\VC11\lib\libcurl.vcxproj
   ) else (
     echo Removing VC11 project files
     call :clean Windows\VC11\src\curlsrc.vcxproj
     call :clean Windows\VC11\lib\libcurl.vcxproj
   )

   if not "%VERSION%" == "ALL" goto success

 :vc12
   echo.

   if "%MODE%" == "GENERATE" (
     echo Generating VC12 project files
     call :generate vcxproj Windows\VC12\src\curlsrc.tmpl Windows\VC12\src\curlsrc.vcxproj
     call :generate vcxproj Windows\VC12\lib\libcurl.tmpl Windows\VC12\lib\libcurl.vcxproj
   ) else (
     echo Removing VC12 project files
     call :clean Windows\VC12\src\curlsrc.vcxproj
     call :clean Windows\VC12\lib\libcurl.vcxproj
   )

   goto success

 rem Main generate function.
 rem
 rem %1 - Project Type (dsp for VC6, vcproj1 for VC7 and VC7.1, vcproj2 for VC8 and VC9
 rem      or vcxproj for VC10, VC11 and VC12)
 rem %2 - Input template file
 rem %3 - Output project file
 rem
 :generate
   if not exist %2 (
     echo.
     echo Error: Cannot open %CD%\%2
     exit /B
   )

   if exist %3 (
     del %3
   )

   echo * %CD%\%3
   for /f "usebackq delims=" %%i in (`"findstr /n ^^ %2"`) do (
     set "var=%%i"
     setlocal enabledelayedexpansion
     set "var=!var:*:=!"

     if "!var!" == "CURL_SRC_C_FILES" (
       for /f "delims=" %%c in ('dir /b ..\src\*.c') do call :element %1 src "%%c" %3
     ) else if "!var!" == "CURL_SRC_H_FILES" (
       for /f "delims=" %%h in ('dir /b ..\src\*.h') do call :element %1 src "%%h" %3
     ) else if "!var!" == "CURL_SRC_RC_FILES" (
       for /f "delims=" %%r in ('dir /b ..\src\*.rc') do call :element %1 src "%%r" %3
     ) else if "!var!" == "CURL_SRC_X_C_FILES" (
       call :element %1 lib "strtoofft.c" %3
       call :element %1 lib "rawstr.c" %3
       call :element %1 lib "nonblock.c" %3
       call :element %1 lib "warnless.c" %3
     ) else if "!var!" == "CURL_SRC_X_H_FILES" (
       call :element %1 lib "config-win32.h" %3
       call :element %1 lib "curl_setup.h" %3
       call :element %1 lib "strtoofft.h" %3
       call :element %1 lib "rawstr.h" %3
       call :element %1 lib "nonblock.h" %3
       call :element %1 lib "warnless.h" %3
     ) else if "!var!" == "CURL_LIB_C_FILES" (
       for /f "delims=" %%c in ('dir /b ..\lib\*.c') do call :element %1 lib "%%c" %3
     ) else if "!var!" == "CURL_LIB_H_FILES" (
       for /f "delims=" %%h in ('dir /b ..\lib\*.h') do call :element %1 lib "%%h" %3
     ) else if "!var!" == "CURL_LIB_RC_FILES" (
       for /f "delims=" %%r in ('dir /b ..\lib\*.rc') do call :element %1 lib "%%r" %3
     ) else if "!var!" == "CURL_LIB_VAUTH_C_FILES" (
       for /f "delims=" %%c in ('dir /b ..\lib\vauth\*.c') do call :element %1 lib\vauth "%%c" %3
     ) else if "!var!" == "CURL_LIB_VAUTH_H_FILES" (
       for /f "delims=" %%h in ('dir /b ..\lib\vauth\*.h') do call :element %1 lib\vauth "%%h" %3
     ) else if "!var!" == "CURL_LIB_VTLS_C_FILES" (
       for /f "delims=" %%c in ('dir /b ..\lib\vtls\*.c') do call :element %1 lib\vtls "%%c" %3
     ) else if "!var!" == "CURL_LIB_VTLS_H_FILES" (
       for /f "delims=" %%h in ('dir /b ..\lib\vtls\*.h') do call :element %1 lib\vtls "%%h" %3
     ) else (
       echo.!var!>> %3
     )

     endlocal
   )
   exit /B

 rem Generates a single file xml element.
 rem
 rem %1 - Project Type (dsp for VC6, vcproj1 for VC7 and VC7.1, vcproj2 for VC8 and VC9
 rem      or vcxproj for VC10, VC11 and VC12)
 rem %2 - Directory (src, lib, lib\vauth or lib\vtls)
 rem %3 - Source filename
 rem %4 - Output project file
 rem
 :element
   set "SPACES=    "
   if "%2" == "lib\vauth" (
     set "TABS=				"
   ) else if "%2" == "lib\vtls" (
     set "TABS=				"
   ) else (
     set "TABS=			"
   )

   call :extension %3 ext

   if "%1" == "dsp" (
     echo # Begin Source File>> %4
     echo.>> %4
     echo SOURCE=..\..\..\..\%2\%~3>> %4
     echo # End Source File>> %4
   ) else if "%1" == "vcproj1" (
     echo %TABS%^<File>> %4
     echo %TABS%	RelativePath="..\..\..\..\%2\%~3"^>>> %4
     echo %TABS%^</File^>>> %4
   ) else if "%1" == "vcproj2" (
     echo %TABS%^<File>> %4
     echo %TABS%	RelativePath="..\..\..\..\%2\%~3">> %4
     echo %TABS%^>>> %4
     echo %TABS%^</File^>>> %4
   ) else if "%1" == "vcxproj" (
     if "%ext%" == "c" (
       echo %SPACES%^<ClCompile Include=^"..\..\..\..\%2\%~3^" /^>>> %4
     ) else if "%ext%" == "h" (
       echo %SPACES%^<ClInclude Include=^"..\..\..\..\%2\%~3^" /^>>> %4
     ) else if "%ext%" == "rc" (
       echo %SPACES%^<ResourceCompile Include=^"..\..\..\..\%2\%~3^" /^>>> %4
     )
   )

   exit /B

 rem Returns the extension for a given filename.
 rem
 rem %1 - The filename
 rem %2 - The return value
 rem
 :extension
   set fname=%~1
   set ename=
 :loop1
   if "%fname%"=="" (
     set %2=
     exit /B
   )

   if not "%fname:~-1%"=="." (
     set ename=%fname:~-1%%ename%
     set fname=%fname:~0,-1%
     goto loop1
   )

   set %2=%ename%
   exit /B

 rem Removes the given project file.
 rem
 rem %1 - The filename
 rem
 :clean
   echo * %CD%\%1

   if exist %1 (
     del %1
   )

   exit /B

 rem CALL this function to generate ..\src\tool_hugehelp.c
 rem Returns exit code 0 on success or 1 on failure.
 :gen_hugehelp
   setlocal
   set LC_ALL=C
   set ROFFCMD=
   if defined HAVE_PERL (
     if defined HAVE_GROFF (
       set ROFFCMD=groff -mtty-char -Tascii -P-c -man
     ) else if defined HAVE_NROFF (
       set ROFFCMD=nroff -c -Tascii -man
     )
   )
   echo * %CD%\..\src\tool_hugehelp.c
   echo #include "tool_setup.h"> ..\src\tool_hugehelp.c
   echo #include "tool_hugehelp.h">> ..\src\tool_hugehelp.c
   if defined ROFFCMD (
     if defined HAVE_GZIP (
       echo #ifndef HAVE_LIBZ>> ..\src\tool_hugehelp.c
     )
     %ROFFCMD% ..\docs\curl.1 2>NUL | perl ..\src\mkhelp.pl ..\docs\MANUAL >> ..\src\tool_hugehelp.c
     if defined HAVE_GZIP (
       echo #else>> ..\src\tool_hugehelp.c
       %ROFFCMD% ..\docs\curl.1 2>NUL | perl ..\src\mkhelp.pl -c ..\docs\MANUAL >> ..\src\tool_hugehelp.c
       echo #endif /^* HAVE_LIBZ ^*/>> ..\src\tool_hugehelp.c
     )
   ) else (
     echo.
     echo Warning: The curl manual could not be integrated in the source. This means when
     echo you build curl the manual will not be available (curl --man^). Integration of
     echo the manual is not required and a summary of the options will still be available
     echo (curl --help^). To integrate the manual your PATH is required to have
     echo groff/nroff, perl and optionally gzip for compression.
     echo.
     echo void hugehelp(void^)>> ..\src\tool_hugehelp.c
     echo #ifdef USE_MANUAL>> ..\src\tool_hugehelp.c
     echo { fputs("built-in manual not included\n", stdout^); }>> ..\src\tool_hugehelp.c
     echo #else>> ..\src\tool_hugehelp.c
     echo {}>> ..\src\tool_hugehelp.c
     echo #endif>> ..\src\tool_hugehelp.c
   )
   findstr "/C:void hugehelp(void)" ..\src\tool_hugehelp.c 1>NUL 2>&1
   if %ERRORLEVEL% NEQ 0 (
     echo Error: Unable to generate ..\src\tool_hugehelp.c
     exit /B 1
   )
   exit /B 0

 rem CALL this function to generate ..\include\curl\curlbuild.h
 rem Returns exit code 0 on success or 1 on failure.
 :gen_curlbuild
   setlocal
   echo * %CD%\..\include\curl\curlbuild.h
   copy /y ..\include\curl\curlbuild.h.dist ..\include\curl\curlbuild.h 1>NUL
   if %ERRORLEVEL% NEQ 0 (
     echo Error: Unable to generate ..\include\curl\curlbuild.h
     exit /B 1
   )
   exit /B 0

 :syntax
   rem Display the help
   echo.
   echo Usage: generate [compiler] [-clean]
   echo.
   echo Compiler:
   echo.
   echo vc6       - Use Visual Studio 6
   echo vc7       - Use Visual Studio .NET
   echo vc7.1     - Use Visual Studio .NET 2003
   echo vc8       - Use Visual Studio 2005
   echo vc9       - Use Visual Studio 2008
   echo vc10      - Use Visual Studio 2010
   echo vc11      - Use Visual Studio 2012
   echo vc12      - Use Visual Studio 2013
   echo.
   echo -clean    - Removes the project files
   goto error

 :unknown
   echo.
   echo Error: Unknown argument '%1'
   goto error

 :nodos
   echo.
   echo Error: Only a Windows NT based Operating System is supported
   goto error

 :nonetdrv
   echo.
   echo Error: This batch file cannot run from a network drive
   goto error

 :seterr
   rem Set the caller's errorlevel.
   rem %1[opt]: Errorlevel as integer.
   rem If %1 is empty the errorlevel will be set to 0.
   rem If %1 is not empty and not an integer the errorlevel will be set to 1.
   setlocal
   set EXITCODE=%~1
   if not defined EXITCODE set EXITCODE=0
   echo %EXITCODE%|findstr /r "[^0-9\-]" 1>NUL 2>&1
   if %ERRORLEVEL% EQU 0 set EXITCODE=1
   exit /b %EXITCODE%

 :error
   endlocal
   exit /B 1

 :success
   endlocal
   exit /B 0
	@echo off
	rem ***************************************************************************
	rem * _ _ ____ _
	rem * Project ___\| \| \| \| _ \\| \|
	rem * / __\| \| \| \| \|_) \| \|
	rem * \| (__\| \|_\| \| _ <\| \|___
	rem * \___\|\___/\|_\| \_\_____\|
	rem *
	rem * Copyright (C) 2014 - 2015, Steve Holme, <steve_holme@hotmail.com>.
	rem *
	rem * This software is licensed as described in the file COPYING, which
	rem * you should have received as part of this distribution. The terms
	rem * are also available at http://curl.haxx.se/docs/copyright.html.
	rem *
	rem * You may opt to use, copy, modify, merge, publish, distribute and/or sell
	rem * copies of the Software, and permit persons to whom the Software is
	rem * furnished to do so, under the terms of the COPYING file.
	rem *
	rem * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
	rem * KIND, either express or implied.
	rem *
	rem ***************************************************************************

	rem NOTES
	rem
	rem Do not set %ERRORLEVEL% to anything. %ERRORLEVEL% is a special variable
	rem that only contains errorlevel when %ERRORLEVEL% is not set. Same for %CD%.
	rem http://blogs.msdn.com/b/oldnewthing/archive/2008/09/26/8965755.aspx
	rem If you need to set the errorlevel do this instead: CALL :seterr [#]

	:begin
	rem Check we are running on a Windows NT derived OS
	if not "%OS%" == "Windows_NT" goto nodos

	rem Check we are not running on a network drive
	if "%~d0."=="\\." goto nonetdrv

	rem Switch to this batch file's directory
	cd /d "%~0\.." 1>NUL 2>&1

	rem Set our variables
	setlocal ENABLEEXTENSIONS
	set VERSION=ALL
	set MODE=GENERATE

	rem Detect programs. HAVE_<PROGNAME>
	rem When not found the variable is set undefined. The undefined pattern
	rem allows for statements like "if not defined HAVE_PERL (command)"
	groff --version <NUL 1>NUL 2>&1
	if %ERRORLEVEL% EQU 0 (set HAVE_GROFF=Y) else (set HAVE_GROFF=)
	nroff --version <NUL 1>NUL 2>&1
	if %ERRORLEVEL% EQU 0 (set HAVE_NROFF=Y) else (set HAVE_NROFF=)
	perl --version <NUL 1>NUL 2>&1
	if %ERRORLEVEL% EQU 0 (set HAVE_PERL=Y) else (set HAVE_PERL=)
	gzip --version <NUL 1>NUL 2>&1
	if %ERRORLEVEL% EQU 0 (set HAVE_GZIP=Y) else (set HAVE_GZIP=)

	rem Display the help
	if /i "%~1" == "-?" goto syntax
	if /i "%~1" == "-h" goto syntax
	if /i "%~1" == "-help" goto syntax

	:parseArgs
	if "%~1" == "" goto start

	if /i "%~1" == "vc6" (
	set VERSION=VC6
	) else if /i "%~1" == "vc7" (
	set VERSION=VC7
	) else if /i "%~1" == "vc7.1" (
	set VERSION=VC7.1
	) else if /i "%~1" == "vc8" (
	set VERSION=VC8
	) else if /i "%~1" == "vc9" (
	set VERSION=VC9
	) else if /i "%~1" == "vc10" (
	set VERSION=VC10
	) else if /i "%~1" == "vc11" (
	set VERSION=VC11
	) else if /i "%~1" == "vc12" (
	set VERSION=VC12
	) else if /i "%~1" == "-clean" (
	set MODE=CLEAN
	) else (
	goto unknown
	)
	shift & goto parseArgs

	:start
	if "%MODE%" == "GENERATE" (
	echo.
	echo Generating prerequisite files
	CALL :gen_curlbuild
	if errorlevel 1 goto error
	CALL :gen_hugehelp
	if errorlevel 1 goto error
	) else (
	echo.
	echo Removing prerequisite files
	call :clean ..\include\curl\curlbuild.h
	call :clean ..\src\tool_hugehelp.c
	)
	if "%VERSION%" == "VC6" goto vc6
	if "%VERSION%" == "VC7" goto vc7
	if "%VERSION%" == "VC7.1" goto vc71
	if "%VERSION%" == "VC8" goto vc8
	if "%VERSION%" == "VC9" goto vc9
	if "%VERSION%" == "VC10" goto vc10
	if "%VERSION%" == "VC11" goto vc11
	if "%VERSION%" == "VC12" goto vc12

	:vc6
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC6 project files
	call :generate dsp Windows\VC6\src\curlsrc.tmpl Windows\VC6\src\curlsrc.dsp
	call :generate dsp Windows\VC6\lib\libcurl.tmpl Windows\VC6\lib\libcurl.dsp
	) else (
	echo Removing VC6 project files
	call :clean Windows\VC6\src\curlsrc.dsp
	call :clean Windows\VC6\lib\libcurl.dsp
	)

	if not "%VERSION%" == "ALL" goto success

	:vc7
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC7 project files
	call :generate vcproj1 Windows\VC7\src\curlsrc.tmpl Windows\VC7\src\curlsrc.vcproj
	call :generate vcproj1 Windows\VC7\lib\libcurl.tmpl Windows\VC7\lib\libcurl.vcproj
	) else (
	echo Removing VC7 project files
	call :clean Windows\VC7\src\curlsrc.vcproj
	call :clean Windows\VC7\lib\libcurl.vcproj
	)

	if not "%VERSION%" == "ALL" goto success

	:vc71
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC7.1 project files
	call :generate vcproj1 Windows\VC7.1\src\curlsrc.tmpl Windows\VC7.1\src\curlsrc.vcproj
	call :generate vcproj1 Windows\VC7.1\lib\libcurl.tmpl Windows\VC7.1\lib\libcurl.vcproj
	) else (
	echo Removing VC7.1 project files
	call :clean Windows\VC7.1\src\curlsrc.vcproj
	call :clean Windows\VC7.1\lib\libcurl.vcproj
	)

	if not "%VERSION%" == "ALL" goto success

	:vc8
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC8 project files
	call :generate vcproj2 Windows\VC8\src\curlsrc.tmpl Windows\VC8\src\curlsrc.vcproj
	call :generate vcproj2 Windows\VC8\lib\libcurl.tmpl Windows\VC8\lib\libcurl.vcproj
	) else (
	echo Removing VC8 project files
	call :clean Windows\VC8\src\curlsrc.vcproj
	call :clean Windows\VC8\lib\libcurl.vcproj
	)

	if not "%VERSION%" == "ALL" goto success

	:vc9
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC9 project files
	call :generate vcproj2 Windows\VC9\src\curlsrc.tmpl Windows\VC9\src\curlsrc.vcproj
	call :generate vcproj2 Windows\VC9\lib\libcurl.tmpl Windows\VC9\lib\libcurl.vcproj
	) else (
	echo Removing VC9 project files
	call :clean Windows\VC9\src\curlsrc.vcproj
	call :clean Windows\VC9\lib\libcurl.vcproj
	)

	if not "%VERSION%" == "ALL" goto success

	:vc10
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC10 project files
	call :generate vcxproj Windows\VC10\src\curlsrc.tmpl Windows\VC10\src\curlsrc.vcxproj
	call :generate vcxproj Windows\VC10\lib\libcurl.tmpl Windows\VC10\lib\libcurl.vcxproj
	) else (
	echo Removing VC10 project files
	call :clean Windows\VC10\src\curlsrc.vcxproj
	call :clean Windows\VC10\lib\libcurl.vcxproj
	)

	if not "%VERSION%" == "ALL" goto success

	:vc11
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC11 project files
	call :generate vcxproj Windows\VC11\src\curlsrc.tmpl Windows\VC11\src\curlsrc.vcxproj
	call :generate vcxproj Windows\VC11\lib\libcurl.tmpl Windows\VC11\lib\libcurl.vcxproj
	) else (
	echo Removing VC11 project files
	call :clean Windows\VC11\src\curlsrc.vcxproj
	call :clean Windows\VC11\lib\libcurl.vcxproj
	)

	if not "%VERSION%" == "ALL" goto success

	:vc12
	echo.

	if "%MODE%" == "GENERATE" (
	echo Generating VC12 project files
	call :generate vcxproj Windows\VC12\src\curlsrc.tmpl Windows\VC12\src\curlsrc.vcxproj
	call :generate vcxproj Windows\VC12\lib\libcurl.tmpl Windows\VC12\lib\libcurl.vcxproj
	) else (
	echo Removing VC12 project files
	call :clean Windows\VC12\src\curlsrc.vcxproj
	call :clean Windows\VC12\lib\libcurl.vcxproj
	)

	goto success

	rem Main generate function.
	rem
	rem %1 - Project Type (dsp for VC6, vcproj1 for VC7 and VC7.1, vcproj2 for VC8 and VC9
	rem or vcxproj for VC10, VC11 and VC12)
	rem %2 - Input template file
	rem %3 - Output project file
	rem
	:generate
	if not exist %2 (
	echo.
	echo Error: Cannot open %CD%\%2
	exit /B
	)

	if exist %3 (
	del %3
	)

	echo * %CD%\%3
	for /f "usebackq delims=" %%i in (`"findstr /n ^^ %2"`) do (
	set "var=%%i"
	setlocal enabledelayedexpansion
	set "var=!var:*:=!"

	if "!var!" == "CURL_SRC_C_FILES" (
	for /f "delims=" %%c in ('dir /b ..\src\*.c') do call :element %1 src "%%c" %3
	) else if "!var!" == "CURL_SRC_H_FILES" (
	for /f "delims=" %%h in ('dir /b ..\src\*.h') do call :element %1 src "%%h" %3
	) else if "!var!" == "CURL_SRC_RC_FILES" (
	for /f "delims=" %%r in ('dir /b ..\src\*.rc') do call :element %1 src "%%r" %3
	) else if "!var!" == "CURL_SRC_X_C_FILES" (
	call :element %1 lib "strtoofft.c" %3
	call :element %1 lib "rawstr.c" %3
	call :element %1 lib "nonblock.c" %3
	call :element %1 lib "warnless.c" %3
	) else if "!var!" == "CURL_SRC_X_H_FILES" (
	call :element %1 lib "config-win32.h" %3
	call :element %1 lib "curl_setup.h" %3
	call :element %1 lib "strtoofft.h" %3
	call :element %1 lib "rawstr.h" %3
	call :element %1 lib "nonblock.h" %3
	call :element %1 lib "warnless.h" %3
	) else if "!var!" == "CURL_LIB_C_FILES" (
	for /f "delims=" %%c in ('dir /b ..\lib\*.c') do call :element %1 lib "%%c" %3
	) else if "!var!" == "CURL_LIB_H_FILES" (
	for /f "delims=" %%h in ('dir /b ..\lib\*.h') do call :element %1 lib "%%h" %3
	) else if "!var!" == "CURL_LIB_RC_FILES" (
	for /f "delims=" %%r in ('dir /b ..\lib\*.rc') do call :element %1 lib "%%r" %3
	) else if "!var!" == "CURL_LIB_VAUTH_C_FILES" (
	for /f "delims=" %%c in ('dir /b ..\lib\vauth\*.c') do call :element %1 lib\vauth "%%c" %3
	) else if "!var!" == "CURL_LIB_VAUTH_H_FILES" (
	for /f "delims=" %%h in ('dir /b ..\lib\vauth\*.h') do call :element %1 lib\vauth "%%h" %3
	) else if "!var!" == "CURL_LIB_VTLS_C_FILES" (
	for /f "delims=" %%c in ('dir /b ..\lib\vtls\*.c') do call :element %1 lib\vtls "%%c" %3
	) else if "!var!" == "CURL_LIB_VTLS_H_FILES" (
	for /f "delims=" %%h in ('dir /b ..\lib\vtls\*.h') do call :element %1 lib\vtls "%%h" %3
	) else (
	echo.!var!>> %3
	)

	endlocal
	)
	exit /B

	rem Generates a single file xml element.
	rem
	rem %1 - Project Type (dsp for VC6, vcproj1 for VC7 and VC7.1, vcproj2 for VC8 and VC9
	rem or vcxproj for VC10, VC11 and VC12)
	rem %2 - Directory (src, lib, lib\vauth or lib\vtls)
	rem %3 - Source filename
	rem %4 - Output project file
	rem
	:element
	set "SPACES= "
	if "%2" == "lib\vauth" (
	set "TABS= "
	) else if "%2" == "lib\vtls" (
	set "TABS= "
	) else (
	set "TABS= "
	)

	call :extension %3 ext

	if "%1" == "dsp" (
	echo # Begin Source File>> %4
	echo.>> %4
	echo SOURCE=..\..\..\..\%2\%~3>> %4
	echo # End Source File>> %4
	) else if "%1" == "vcproj1" (
	echo %TABS%^<File>> %4
	echo %TABS% RelativePath="..\..\..\..\%2\%~3"^>>> %4
	echo %TABS%^</File^>>> %4
	) else if "%1" == "vcproj2" (
	echo %TABS%^<File>> %4
	echo %TABS% RelativePath="..\..\..\..\%2\%~3">> %4
	echo %TABS%^>>> %4
	echo %TABS%^</File^>>> %4
	) else if "%1" == "vcxproj" (
	if "%ext%" == "c" (
	echo %SPACES%^<ClCompile Include=^"..\..\..\..\%2\%~3^" /^>>> %4
	) else if "%ext%" == "h" (
	echo %SPACES%^<ClInclude Include=^"..\..\..\..\%2\%~3^" /^>>> %4
	) else if "%ext%" == "rc" (
	echo %SPACES%^<ResourceCompile Include=^"..\..\..\..\%2\%~3^" /^>>> %4
	)
	)

	exit /B

	rem Returns the extension for a given filename.
	rem
	rem %1 - The filename
	rem %2 - The return value
	rem
	:extension
	set fname=%~1
	set ename=
	:loop1
	if "%fname%"=="" (
	set %2=
	exit /B
	)

	if not "%fname:~-1%"=="." (
	set ename=%fname:~-1%%ename%
	set fname=%fname:~0,-1%
	goto loop1
	)

	set %2=%ename%
	exit /B

	rem Removes the given project file.
	rem
	rem %1 - The filename
	rem
	:clean
	echo * %CD%\%1

	if exist %1 (
	del %1
	)

	exit /B

	rem CALL this function to generate ..\src\tool_hugehelp.c
	rem Returns exit code 0 on success or 1 on failure.
	:gen_hugehelp
	setlocal
	set LC_ALL=C
	set ROFFCMD=
	if defined HAVE_PERL (
	if defined HAVE_GROFF (
	set ROFFCMD=groff -mtty-char -Tascii -P-c -man
	) else if defined HAVE_NROFF (
	set ROFFCMD=nroff -c -Tascii -man
	)
	)
	echo * %CD%\..\src\tool_hugehelp.c
	echo #include "tool_setup.h"> ..\src\tool_hugehelp.c
	echo #include "tool_hugehelp.h">> ..\src\tool_hugehelp.c
	if defined ROFFCMD (
	if defined HAVE_GZIP (
	echo #ifndef HAVE_LIBZ>> ..\src\tool_hugehelp.c
	)
	%ROFFCMD% ..\docs\curl.1 2>NUL \| perl ..\src\mkhelp.pl ..\docs\MANUAL >> ..\src\tool_hugehelp.c
	if defined HAVE_GZIP (
	echo #else>> ..\src\tool_hugehelp.c
	%ROFFCMD% ..\docs\curl.1 2>NUL \| perl ..\src\mkhelp.pl -c ..\docs\MANUAL >> ..\src\tool_hugehelp.c
	echo #endif /^* HAVE_LIBZ ^*/>> ..\src\tool_hugehelp.c
	)
	) else (
	echo.
	echo Warning: The curl manual could not be integrated in the source. This means when
	echo you build curl the manual will not be available (curl --man^). Integration of
	echo the manual is not required and a summary of the options will still be available
	echo (curl --help^). To integrate the manual your PATH is required to have
	echo groff/nroff, perl and optionally gzip for compression.
	echo.
	echo void hugehelp(void^)>> ..\src\tool_hugehelp.c
	echo #ifdef USE_MANUAL>> ..\src\tool_hugehelp.c
	echo { fputs("built-in manual not included\n", stdout^); }>> ..\src\tool_hugehelp.c
	echo #else>> ..\src\tool_hugehelp.c
	echo {}>> ..\src\tool_hugehelp.c
	echo #endif>> ..\src\tool_hugehelp.c
	)
	findstr "/C:void hugehelp(void)" ..\src\tool_hugehelp.c 1>NUL 2>&1
	if %ERRORLEVEL% NEQ 0 (
	echo Error: Unable to generate ..\src\tool_hugehelp.c
	exit /B 1
	)
	exit /B 0

	rem CALL this function to generate ..\include\curl\curlbuild.h
	rem Returns exit code 0 on success or 1 on failure.
	:gen_curlbuild
	setlocal
	echo * %CD%\..\include\curl\curlbuild.h
	copy /y ..\include\curl\curlbuild.h.dist ..\include\curl\curlbuild.h 1>NUL
	if %ERRORLEVEL% NEQ 0 (
	echo Error: Unable to generate ..\include\curl\curlbuild.h
	exit /B 1
	)
	exit /B 0

	:syntax
	rem Display the help
	echo.
	echo Usage: generate [compiler] [-clean]
	echo.
	echo Compiler:
	echo.
	echo vc6 - Use Visual Studio 6
	echo vc7 - Use Visual Studio .NET
	echo vc7.1 - Use Visual Studio .NET 2003
	echo vc8 - Use Visual Studio 2005
	echo vc9 - Use Visual Studio 2008
	echo vc10 - Use Visual Studio 2010
	echo vc11 - Use Visual Studio 2012
	echo vc12 - Use Visual Studio 2013
	echo.
	echo -clean - Removes the project files
	goto error

	:unknown
	echo.
	echo Error: Unknown argument '%1'
	goto error

	:nodos
	echo.
	echo Error: Only a Windows NT based Operating System is supported
	goto error

	:nonetdrv
	echo.
	echo Error: This batch file cannot run from a network drive
	goto error

	:seterr
	rem Set the caller's errorlevel.
	rem %1[opt]: Errorlevel as integer.
	rem If %1 is empty the errorlevel will be set to 0.
	rem If %1 is not empty and not an integer the errorlevel will be set to 1.
	setlocal
	set EXITCODE=%~1
	if not defined EXITCODE set EXITCODE=0
	echo %EXITCODE%\|findstr /r "[^0-9\-]" 1>NUL 2>&1
	if %ERRORLEVEL% EQU 0 set EXITCODE=1
	exit /b %EXITCODE%

	:error
	endlocal
	exit /B 1

	:success
	endlocal
	exit /B 0