diff --git a/docs/examples/curlh b/docs/examples/curlh
new file mode 100755
index 0000000..28b9cce
--- /dev/null
+++ b/docs/examples/curlh
@@ -0,0 +1,2626 @@
+#!/bin/bash
+# Test program to demonstrate what a more powerful set of curl --help options
+# might look like.
+# Based on curl 7.70.0
+# Dan Fandrich
+# May 2020
+
+if [[ -z "$1" ]]; then
+    echo "curl: try 'curlh --help' or 'curlh --manual' for more information"
+    echo "or 'curlh --help-demo' for information about this demonstration script"
+    exit 2
+fi
+
+ALL_OPTS="$@"
+HELP_TYPE=
+VERBOSE=
+while [[ -n "$1" ]]; do
+    case "$1" in 
+        --help | -h)
+            HELP_TYPE=basic
+            ;;
+        --help-clientauth)
+            # Special case both --help-clientauth and --help-ftps being used at the same time
+            if [[ "$HELP_TYPE" == "ftps" ]]; then
+                HELP_TYPE=clientauth+ftps
+            else
+                HELP_TYPE=clientauth
+            fi
+            ;;
+        --no-help-https)
+            if [[ -n "$HELP_TYPE" ]]; then
+                HELP_TYPE="$HELP_TYPE"-https
+            else
+                HELP_TYPE=-https
+            fi
+            ;;
+        --help-ftps)
+            if [[ "$HELP_TYPE" == "clientauth" ]]; then
+                HELP_TYPE=clientauth+ftps
+            elif [[ "$HELP_TYPE" == "-https" ]]; then
+                HELP_TYPE=ftps-https
+            else
+                HELP_TYPE=ftps
+            fi
+            ;;
+        --help-search)
+            case "$2" in
+                sni)
+                    if [[ -n "$VERBOSE" ]]; then
+                        cat <<EOF
+These matching options were found for "sni":
+
+--connect-to <HOST1:PORT1:HOST2:PORT2>
+
+      For  a  request  to  the  given  HOST1:PORT1  pair,  connect  to
+      HOST2:PORT2 instead.  This option is suitable to direct requests
+      at a specific server, e.g. at a specific cluster node in a clus-
+      ter of servers. This option is only used to establish  the  net-
+      work  connection.  It  does NOT affect the hostname/port that is
+      used for TLS/SSL (e.g. SNI, certificate verification) or for the
+      application  protocols.  "HOST1"  and  "PORT1"  may be the empty
+      string, meaning "any host/port". "HOST2" and "PORT2" may also be
+      the   empty   string,   meaning   "use  the  request's  original
+      host/port".
+
+      A "host" specified to this option is compared as a string, so it
+      needs  to  match  the name used in request URL. It can be either
+      numerical such as "127.0.0.1" or the full host name such as "ex-
+      ample.org".
+
+      This option can be used many times to add many connect rules.
+
+      See also --resolve and -H, --header. Added in 7.49.0.
+EOF
+                    else
+                        cat <<EOF
+These matching options were found for "sni":
+
+     --connect-to <HOST1:PORT1:HOST2:PORT2> Connect to host
+EOF
+                    fi
+                    exit 0;
+                    ;;
+
+                epsv)
+                    if [[ -n "$VERBOSE" ]]; then
+                        cat <<EOF
+Verbose help TBD
+EOF
+                    else
+                        cat <<EOF
+These matching options were found for "epsv":
+
+     --disable-epsv  Inhibit using EPSV
+     --ftp-pasv      Use PASV/EPSV instead of PORT
+     --ftp-pret      Send PRET before PASV
+     --ftp-skip-pasv-ip Skip the IP address for PASV
+EOF
+                    fi
+                    exit 0;
+                    ;;
+                *)
+                    echo "Error: you're confusing my brain with this search!"
+                    echo "I only know about sni and epsv."
+                    exit 1
+                    ;;
+            esac
+            ;;
+
+        --help-*)
+            HELP_TYPE="${1#--help-}"
+            ;;
+        --verbose | -v)
+            VERBOSE=1
+            ;;
+    esac
+    shift
+done
+
+# Restore options in case we need to call curl
+set -- $ALL_OPTS
+
+if [[ -n "$HELP_TYPE" ]]; then
+    case "$HELP_TYPE" in
+        basic)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Basic options:
+
+--anyauth
+      (HTTP) Tells curl to figure out authentication method by  itself,  and
+      use  the  most  secure  one the remote site claims to support. This is
+      done by first doing a request and checking the response-headers,  thus
+      possibly inducing an extra network round-trip. This is used instead of
+      setting a specific authentication method, which you can do with  --ba‐
+      sic, --digest, --ntlm, and --negotiate.
+
+      Using --anyauth is not recommended if you do uploads from stdin, since
+      it may require data to be sent twice and then the client must be  able
+      to rewind. If the need should arise when uploading from stdin, the up‐
+      load operation will fail.
+
+      Used together with -u, --user.
+
+      See also --proxy-anyauth and --basic and --digest.
+
+-a, --append
+      (FTP SFTP) When used in an upload, this makes curl append to the  tar‐
+      get  file instead of overwriting it. If the remote file doesn't exist,
+      it will be created.  Note that this  flag  is  ignored  by  some  SFTP
+      servers (including OpenSSH).
+
+--basic
+      (HTTP)  Tells  curl  to  use HTTP Basic authentication with the remote
+      host. This is the default and this option is usually pointless, unless
+      you  use  it to override a previously set option that sets a different
+      authentication method (such as --ntlm, --digest, or --negotiate).
+
+      Used together with -u, --user.
+
+      See also --proxy-basic.
+
+-K, --config <file>
+
+      Specify a text file to read curl arguments from. The command line  ar‐
+      guments  found  in the text file will be used as if they were provided
+      on the command line.
+
+      Options and their parameters must be specified on the same line in the
+      file,  separated by whitespace, colon, or the equals sign. Long option
+      names can optionally be given in the config file without  the  initial
+      double dashes and if so, the colon or equals characters can be used as
+      separators. If the option is specified with one or two  dashes,  there
+      can be no colon or equals character between the option and its parame‐
+      ter.
+
+      If the parameter contains whitespace (or starts with : or =), the  pa‐
+      rameter must be enclosed within quotes. Within double quotes, the fol‐
+      lowing escape sequences are available: \\, \", \t, \n, \r  and  \v.  A
+      backslash  preceding  any other letter is ignored. If the first column
+      of a config line is a '#' character, the rest  of  the  line  will  be
+      treated  as  a comment. Only write one option per physical line in the
+      config file.
+
+      Specify the filename to -K, --config as '-' to make curl read the file
+      from stdin.
+
+      Note  that to be able to specify a URL in the config file, you need to
+      specify it using the --url option, and not by simply writing  the  URL
+      on its own line. So, it could look similar to this:
+
+      url = "https://curl.haxx.se/docs/"
+
+      When  curl  is invoked, it (unless -q, --disable is used) checks for a
+      default config file and uses it if found. The default config  file  is
+      checked for in the following places in this order:
+
+      1)  curl  tries  to  find  the  "home  dir":  It  first checks for the
+      CURL_HOME and then the HOME environment variables.  Failing  that,  it
+      uses getpwuid() on Unix-like systems (which returns the home dir given
+      the current user in your system). On Windows, it then checks  for  the
+      APPDATA  variable,  or as a last resort the '%USERPROFILE%\Application
+      Data'.
+
+      2) On windows, if there is no .curlrc file in the home dir, it  checks
+      for  one  in  the same dir the curl executable is placed. On Unix-like
+      systems, it will simply try to load .curlrc from the  determined  home
+      dir.
+
+      # --- Example file ---
+      # this is a comment
+      url = "example.com"
+      output = "curlhere.html"
+      user-agent = "superagent/1.0"
+
+      # and fetch another URL too
+      url = "example.com/docs/manpage.html"
+      -O
+      referer = "http://nowhereatall.example.com/"
+      # --- End of example file ---
+
+      This option can be used multiple times to load multiple config files.
+
+--connect-timeout <seconds>
+      Maximum  time  in  seconds  that  you allow curl's connection to take.
+      This only limits the connection phase, so if curl connects within  the
+      given  period  it  will continue - if not it will exit.  Since version
+      7.32.0, this option accepts decimal values.
+
+      If this option is used several times, the last one will be used.
+
+      See also -m, --max-time.
+
+-c, --cookie-jar <filename>
+      (HTTP) Specify to which file you want curl to write all cookies  after
+      a  completed  operation.  Curl  writes  all cookies from its in-memory
+      cookie storage to the given file at the end of operations. If no cook‐
+      ies are known, no data will be written. The file will be written using
+      the Netscape cookie file format. If you set the file name to a  single
+      dash, "-", the cookies will be written to stdout.
+
+      This  command  line  option will activate the cookie engine that makes
+      curl record and use cookies. Another way to activate it is to use  the
+      -b, --cookie option.
+
+      If the cookie jar can't be created or written to, the whole curl oper‐
+      ation won't fail or even report an error clearly. Using -v,  --verbose
+      will  get  a  warning displayed, but that is the only visible feedback
+      you get about this possibly lethal situation.
+
+      If this option is used several times, the  last  specified  file  name
+      will be used.
+
+-b, --cookie <data|filename>
+      (HTTP)  Pass  the  data to the HTTP server in the Cookie header. It is
+      supposedly the data previously received from the  server  in  a  "Set-
+      Cookie:"  line.   The  data  should  be  in  the format "NAME1=VALUE1;
+      NAME2=VALUE2".
+
+      If no '=' symbol is used in the argument, it is instead treated  as  a
+      filename to read previously stored cookie from. This option also acti‐
+      vates the cookie engine which will make curl record incoming  cookies,
+      which  may  be  handy if you're using this in combination with the -L,
+      --location option or do multiple URL transfers on the same invoke.  If
+      the file name is exactly a minus ("-"), curl will instead the contents
+      from stdin.
+
+      The file format of the file to read cookies from should be plain  HTTP
+      headers (Set-Cookie style) or the Netscape/Mozilla cookie file format.
+
+      The file specified with -b, --cookie is only used as input. No cookies
+      will be written to the file. To store cookies, use the  -c,  --cookie-
+      jar option.
+
+      Exercise  caution  if you are using this option and multiple transfers
+      may occur.  If you use the NAME1=VALUE1; format, or in a file use  the
+      Set-Cookie  format and don't specify a domain, then the cookie is sent
+      for any domain (even after redirects are followed) and cannot be modi‐
+      fied  by  a  server-set  cookie. If the cookie engine is enabled and a
+      server sets a cookie of the same name then both will be sent on a  fu‐
+      ture  transfer  to  that server, likely not what you intended.  To ad‐
+      dress these issues set a domain in Set-Cookie (doing that will include
+      sub domains) or use the Netscape format.
+
+      If this option is used several times, the last one will be used.
+
+      Users  very  often want to both read cookies from a file and write up‐
+      dated cookies back to a file, so  using  both  -b,  --cookie  and  -c,
+      --cookie-jar in the same command line is common.
+
+-d, --data <data>
+      (HTTP)  Sends the specified data in a POST request to the HTTP server,
+      in the same way that a browser does when a user has filled in an  HTML
+      form  and  presses the submit button. This will cause curl to pass the
+      data to the server using the  content-type  application/x-www-form-ur‐
+      lencoded.  Compare to -F, --form.
+
+      --data-raw  is almost the same but does not have a special interpreta‐
+      tion of the @ character. To post data purely binary,  you  should  in‐
+      stead use the --data-binary option.  To URL-encode the value of a form
+      field you may use --data-urlencode.
+
+      If any of these options is used more than once  on  the  same  command
+      line,  the  data pieces specified will be merged together with a sepa‐
+      rating &-symbol. Thus, using '-d  name=daniel  -d  skill=lousy'  would
+      generate a post chunk that looks like 'name=daniel&skill=lousy'.
+
+      If  you  start  the  data with the letter @, the rest should be a file
+      name to read the data from, or - if you want curl  to  read  the  data
+      from  stdin. Multiple files can also be specified. Posting data from a
+      file named 'foobar' would thus be done with -d, --data  @foobar.  When
+      --data  is  told  to  read from a file like that, carriage returns and
+      newlines will be stripped out. If you don't want the  @  character  to
+      have a special interpretation use --data-raw instead.
+
+      See  also  --data-binary and --data-urlencode and --data-raw. This op‐
+      tion overrides -F, --form and -I, --head and -T, --upload-file.
+
+-f, --fail
+      (HTTP) Fail silently (no output at all)  on  server  errors.  This  is
+      mostly  done  to  better enable scripts etc to better deal with failed
+      attempts. In normal cases when an HTTP server fails to deliver a docu‐
+      ment,  it  returns  an  HTML document stating so (which often also de‐
+      scribes why and more). This flag will  prevent  curl  from  outputting
+      that and return error 22.
+
+      This  method  is  not fail-safe and there are occasions where non-suc‐
+      cessful response codes will slip through, especially when  authentica‐
+      tion is involved (response codes 401 and 407).
+
+--fail-early
+      Fail and exit on the first detected transfer error.
+
+      When  curl  is  used  to do multiple transfers on the command line, it
+      will attempt to operate on each given URL, one by one. By default,  it
+      will  ignore  errors  if  there are more URLs given and the last URL's
+      success will determine the error code curl returns. So early  failures
+      will be "hidden" by subsequent successful transfers.
+
+      Using  this  option,  curl  will  instead return an error on the first
+      transfer that fails, independent of the amount of URLs that are  given
+      on  the  command line. This way, no transfer failures go undetected by
+      scripts and similar.
+
+      This option is global and does not need to be specified for  each  use
+      of -:, --next.
+
+      This  option does not imply -f, --fail, which causes transfers to fail
+      due to the server's HTTP status code. You can combine the two options,
+      however  note  -f,  --fail is not global and is therefore contained by
+      -:, --next.
+
+      Added in 7.52.0.
+
+-F, --form <name=content>
+      (HTTP SMTP IMAP) For HTTP protocol family, this lets  curl  emulate  a
+      filled-in  form  in  which  a user has pressed the submit button. This
+      causes curl to POST data using  the  Content-Type  multipart/form-data
+      according to RFC 2388.
+
+      For  SMTP  and IMAP protocols, this is the mean to compose a multipart
+      mail message to transmit.
+
+      This enables uploading of binary files etc.  To  force  the  'content'
+      part  to  be  a file, prefix the file name with an @ sign. To just get
+      the content part from a file, prefix the file name with the symbol  <.
+      The  difference  between  @  and < is then that @ makes a file get at‐
+      tached in the post as a file upload, while the < makes  a  text  field
+      and just get the contents for that text field from a file.
+
+      Tell  curl  to read content from stdin instead of a file by using - as
+      filename. This goes for both @ and < constructs. When stdin  is  used,
+      the contents is buffered in memory first by curl to determine its size
+      and allow a possible resend.  Defining a part's data from a named non-
+      regular  file  (such  as a named pipe or similar) is unfortunately not
+      subject to buffering and will  be  effectively  read  at  transmission
+      time;  since the full size is unknown before the transfer starts, such
+      data is sent as chunks by HTTP and rejected by IMAP.
+
+      Example: send an image to an HTTP server, where 'profile' is the  name
+      of the form-field to which the file portrait.jpg will be the input:
+
+       curl -F profile=@portrait.jpg https://example.com/upload.cgi
+
+      Example:  send  a  your  name  and shoe size in two text fields to the
+      server:
+
+       curl -F name=John -F shoesize=11 https://example.com/
+
+      Example: send a your essay in a text field to the server. Send it as a
+      plain text field, but get the contents for it from a local file:
+
+       curl -F "story=<hugefile.txt" https://example.com/
+
+      You can also tell curl what Content-Type to use by using 'type=', in a
+      manner similar to:
+
+       curl -F "web=@index.html;type=text/html" example.com
+
+      or
+
+       curl -F "name=daniel;type=text/foo" example.com
+
+      You can also explicitly change the name field of a file upload part by
+      setting filename=, like this:
+
+       curl -F "file=@localfile;filename=nameinpost" example.com
+
+      If  filename/path  contains  ','  or ';', it must be quoted by double-
+      quotes like:
+
+       curl -F "file=@\"localfile\";filename=\"nameinpost\"" example.com
+
+      or
+
+       curl -F 'file=@"localfile";filename="nameinpost"' example.com
+
+      Note that if a filename/path is quoted by double-quotes,  any  double-
+      quote or backslash within the filename must be escaped by backslash.
+
+      Quoting  must  also  be  applied to non-file data if it contains semi‐
+      colons, leading/trailing spaces or leading double quotes:
+
+       curl -F 'colors="red; green; blue";type=text/x-myapp' example.com
+
+      You can add custom headers to the field by setting headers=, like
+
+        curl -F "submit=OK;headers=\"X-submit-type: OK\"" example.com
+
+      or
+
+        curl -F "submit=OK;headers=@headerfile" example.com
+
+      The headers= keyword may appear more that once and above  notes  about
+      quoting  apply.  When  headers  are  read from a file, Empty lines and
+      lines starting with '#' are comments and ignored; each header  can  be
+      folded  by  splitting  between two words and starting the continuation
+      line with a space; embedded carriage-returns and trailing  spaces  are
+      stripped.  Here is an example of a header file contents:
+
+        # This file contain two headers.
+        X-header-1: this is a header
+
+        # The following header is folded.
+        X-header-2: this is
+         another header
+
+      To  support sending multipart mail messages, the syntax is extended as
+      follows:
+      - name can be omitted: the equal sign is the first  character  of  the
+      argument,
+      -  if  data starts with '(', this signals to start a new multipart: it
+      can be followed by a content type specification.
+      - a multipart can be terminated with a '=)' argument.
+
+      Example: the following command sends an SMTP mime e-mail consisting in
+      an inline part in two alternative formats: plain text and HTML. It at‐
+      taches a text file:
+
+       curl -F '=(;type=multipart/alternative' \
+               -F '=plain text message' \
+               -F '= <body>HTML message</body>;type=text/html' \
+            -F '=)' -F '=@textfile.txt' ...  smtp://example.com
+
+      Data can be encoded for transfer using encoder=.  Available  encodings
+      are binary and 8bit that do nothing else than adding the corresponding
+      Content-Transfer-Encoding header, 7bit that only rejects 8-bit charac‐
+      ters  with  a transfer error, quoted-printable and base64 that encodes
+      data according to the corresponding schemes, limiting lines length  to
+      76 characters.
+
+      Example:  send multipart mail with a quoted-printable text message and
+      a base64 attached file:
+
+       curl -F '=text message;encoder=quoted-printable' \
+            -F '=@localfile;encoder=base64' ... smtp://example.com
+
+      See further examples and details in the MANUAL.
+
+      This option can be used multiple times.
+
+      This option overrides -d, --data and -I, --head and -T, --upload-file.
+
+--form-string <name=string>
+      (HTTP  SMTP  IMAP)  Similar to -F, --form except that the value string
+      for the named parameter is used literally. Leading '@' and '<' charac‐
+      ters,  and  the  ';type=' string in the value have no special meaning.
+      Use this in preference to -F, --form if there's any  possibility  that
+      the  string  value may accidentally trigger the '@' or '<' features of
+      -F, --form.
+
+      See also -F, --form.
+
+-G, --get
+      When used, this option will make all data specified with  -d,  --data,
+      --data-binary  or  --data-urlencode  to be used in an HTTP GET request
+      instead of the POST request that otherwise would  be  used.  The  data
+      will be appended to the URL with a '?' separator.
+
+      If  used in combination with -I, --head, the POST data will instead be
+      appended to the URL with a HEAD request.
+
+      If this option is used several times, only the first one is used. This
+      is  because  undoing a GET doesn't make sense, but you should then in‐
+      stead enforce the alternative method you prefer.
+
+-g, --globoff
+      This option switches off the "URL globbing parser". When you set  this
+      option,  you  can  specify  URLs that contain the letters {}[] without
+      having them being interpreted by curl itself. Note that these  letters
+      are not normal legal URL contents but they should be encoded according
+      to the URI standard.
+
+-I, --head
+      (HTTP FTP FILE) Fetch the headers only! HTTP-servers feature the  com‐
+      mand HEAD which this uses to get nothing but the header of a document.
+      When used on an FTP or FILE file, curl displays the file size and last
+      modification time only.
+
+-H, --header <header/@file>
+      (HTTP)  Extra  header to include in the request when sending HTTP to a
+      server. You may specify any number of extra headers. Note that if  you
+      should add a custom header that has the same name as one of the inter‐
+      nal ones curl would use, your externally set header will be  used  in‐
+      stead of the internal one. This allows you to make even trickier stuff
+      than curl would normally do. You should  not  replace  internally  set
+      headers  without  knowing  perfectly well what you're doing. Remove an
+      internal header by giving a replacement without content on  the  right
+      side  of  the  colon, as in: -H "Host:". If you send the custom header
+      with no-value then its header must be  terminated  with  a  semicolon,
+      such as -H "X-Custom-Header;" to send "X-Custom-Header:".
+
+      curl  will make sure that each header you add/replace is sent with the
+      proper end-of-line marker, you should thus not add that as a  part  of
+      the header content: do not add newlines or carriage returns, they will
+      only mess things up for you.
+
+      Starting in 7.55.0, this option can  take  an  argument  in  @filename
+      style, which then adds a header for each line in the input file. Using
+      @- will make curl read the header file from stdin.
+
+      See also the -A, --user-agent and -e, --referer options.
+
+      Starting in 7.37.0, you need --proxy-header to send custom headers in‐
+      tended for a proxy.
+
+      Example:
+
+       curl -H "X-First-Name: Joe" http://example.com/
+
+      WARNING:  headers  set  with this option will be set in all requests -
+      even after redirects are followed, like when told with -L, --location.
+      This  can lead to the header being sent to other hosts than the origi‐
+      nal host, so sensitive headers should be used  with  caution  combined
+      with following redirects.
+
+      This  option can be used multiple times to add/replace/remove multiple
+      headers.
+
+-h, --help
+      Usage help. This lists all basic command line options with  a  short
+      description.
+
+-k, --insecure
+      (TLS) By default, every SSL connection curl makes is  verified  to  be
+      secure. This option allows curl to proceed and operate even for server
+      connections otherwise considered insecure.
+
+      The server connection is verified by making sure the server's certifi‐
+      cate  contains the right name and verifies successfully using the cert
+      store.
+
+      See this online resource for further details:
+       https://curl.haxx.se/docs/sslcerts.html
+
+      See also --proxy-insecure and --cacert.
+
+-L, --location
+      (HTTP)  If  the  server reports that the requested page has moved to a
+      different location (indicated with a Location: header and  a  3XX  re‐
+      sponse  code),  this option will make curl redo the request on the new
+      place. If used together with -i, --include or -I, --head, headers from
+      all  requested  pages will be shown. When authentication is used, curl
+      only sends its credentials to the initial host. If  a  redirect  takes
+      curl to a different host, it won't be able to intercept the user+pass‐
+      word. See also --location-trusted on how to change this. You can limit
+      the amount of redirects to follow by using the --max-redirs option.
+
+      When  curl  follows a redirect and the request is not a plain GET (for
+      example POST or PUT), it will do the following request with a  GET  if
+      the  HTTP  response was 301, 302, or 303. If the response code was any
+      other 3xx code, curl will re-send the following request using the same
+      unmodified method.
+
+      You  can tell curl to not change the non-GET request method to GET af‐
+      ter a 30x response by using the dedicated options for that: --post301,
+      --post302 and --post303.
+
+-M, --manual
+      Manual. Display the huge help text.
+
+-m, --max-time <seconds>
+      Maximum time in seconds that you allow the whole  operation  to  take.
+      This  is  useful for preventing your batch jobs from hanging for hours
+      due to slow networks or links going down.  Since 7.32.0,  this  option
+      accepts  decimal values, but the actual timeout will decrease in accu‐
+      racy as the specified timeout increases in decimal precision.
+
+      If this option is used several times, the last one will be used.
+
+      See also --connect-timeout.
+
+-n, --netrc
+      Makes curl scan the .netrc (_netrc on Windows) file in the user's home
+      directory for login name and password. This is typically used for  FTP
+      on  Unix. If used with HTTP, curl will enable user authentication. See
+      netrc(5) ftp(1) for details on the file format. Curl will not complain
+      if  that file doesn't have the right permissions (it should not be ei‐
+      ther world- or group-readable). The  environment  variable  "HOME"  is
+      used to find the home directory.
+
+      A quick and very simple example of how to setup a .netrc to allow curl
+      to FTP to the machine host.domain.com  with  user  name  'myself'  and
+      password 'secret' should look similar to:
+
+      machine host.domain.com login myself password secret
+
+-o, --output <file>
+      Write output to <file> instead of stdout. If you are using {} or [] to
+      fetch multiple documents, you can use '#' followed by a number in  the
+      <file>  specifier.  That  variable  will  be replaced with the current
+      string for the URL being fetched. Like in:
+
+       curl http://{one,two}.example.com -o "file_#1.txt"
+
+      or use several variables like:
+
+       curl http://{site,host}.host[1-5].com -o "#1_#2"
+
+      You may use this option as many times as the number of URLs you  have.
+      For example, if you specify two URLs on the same command line, you can
+      use it like this:
+
+        curl -o aa example.com -o bb example.net
+
+      and the order of the -o options and the URLs doesn't matter, just that
+      the first -o is for the first URL and so on, so the above command line
+      can also be written as
+
+        curl example.com example.net -o aa -o bb
+
+      See also the --create-dirs option to create the local directories  dy‐
+      namically. Specifying the output as '-' (a single dash) will force the
+      output to be done to stdout.
+
+      See also -O, --remote-name and  --remote-name-all  and  -J,  --remote-
+      header-name.
+
+-#, --progress-bar
+      Make curl display transfer progress as a simple progress  bar  instead
+      of the standard, more informational, meter.
+
+      This  progress  bar  draws  a single line of '#' characters across the
+      screen and shows a percentage if  the  transfer  size  is  known.  For
+      transfers  without a known size, there will be space ship (-=o=-) that
+      moves back and forth but only while data is being transferred, with  a
+      set of flying hash sign symbols on top.
+
+-x, --proxy [protocol://]host[:port]
+      Use the specified proxy.
+
+      The proxy string can be specified with a protocol:// prefix. No proto‐
+      col specified or http:// will be treated as HTTP proxy. Use socks4://,
+      socks4a://, socks5:// or socks5h:// to request a specific  SOCKS  ver‐
+      sion to be used.  (The protocol support was added in curl 7.21.7)
+
+      HTTPS  proxy  support via https:// protocol prefix was added in 7.52.0
+      for OpenSSL, GnuTLS and NSS.
+
+      Unrecognized and unsupported proxy  protocols  cause  an  error  since
+      7.52.0.   Prior  versions  may ignore the protocol and use http:// in‐
+      stead.
+
+      If the port number is not specified in the proxy string, it is assumed
+      to be 1080.
+
+      This  option  overrides  existing  environment  variables that set the
+      proxy to use. If there's an environment variable setting a proxy,  you
+      can set proxy to "" to override it.
+
+      All  operations  that  are performed over an HTTP proxy will transpar‐
+      ently be converted to HTTP. It means that  certain  protocol  specific
+      operations  might  not  be  available. This is not the case if you can
+      tunnel through the proxy, as one with the -p, --proxytunnel option.
+
+      User and password that might be provided in the proxy string  are  URL
+      decoded by curl. This allows you to pass in special characters such as
+      @ by using %40 or pass in a colon with %3a.
+
+      The proxy host can be specified the exact same way as the proxy  envi‐
+      ronment variables, including the protocol prefix (http://) and the em‐
+      bedded user + password.
+
+      If this option is used several times, the last one will be used.
+
+-U, --proxy-user <user:password>
+      Specify the user name and password to use for proxy authentication.
+
+      If you use a Windows SSPI-enabled curl binary and do either  Negotiate
+      or  NTLM authentication then you can tell curl to select the user name
+      and password from your environment by specifying a single  colon  with
+      this option: "-U :".
+
+      On  systems  where  it works, curl will hide the given option argument
+      from process listings. This is not enough to protect credentials  from
+      possibly  getting  seen by other users on the same system as they will
+      still be visible for a brief moment  before  cleared.  Such  sensitive
+      data should be retrieved from a file instead or similar and never used
+      in clear text in a command line.
+
+      If this option is used several times, the last one will be used.
+
+--retry <num>
+      If a transient error is returned when curl tries to perform  a  trans‐
+      fer,  it will retry this number of times before giving up. Setting the
+      number to 0 makes curl do no retries (which is the default). Transient
+      error means either: a timeout, an FTP 4xx response code or an HTTP 408
+      or 5xx response code.
+
+      When curl is about to retry a transfer, it will first wait one  second
+      and  then  for all forthcoming retries it will double the waiting time
+      until it reaches 10 minutes which then will be the delay  between  the
+      rest of the retries.  By using --retry-delay you disable this exponen‐
+      tial backoff algorithm. See also --retry-max-time to limit  the  total
+      time allowed for retries.
+
+      Since  curl  7.66.0,  curl  will comply with the Retry-After: response
+      header if one was present to know when to issue the next retry.
+
+      If this option is used several times, the last one will be used.
+
+      Added in 7.12.3.
+
+-s, --silent
+      Silent  or  quiet  mode.  Don't show progress meter or error messages.
+      Makes Curl mute. It will still output the data  you  ask  for,  poten‐
+      tially even to the terminal/stdout unless you redirect it.
+
+      Use  -S,  --show-error  in addition to this option to disable progress
+      meter but still show error messages.
+
+      See also -v, --verbose and --stderr.
+
+--ssl  (FTP IMAP POP3 SMTP) Try to use SSL/TLS for the  connection.   Reverts
+      to a non-secure connection if the server doesn't support SSL/TLS.  See
+      also --ftp-ssl-control and --ssl-reqd for different levels of  encryp‐
+      tion required.
+
+      This  option  was  formerly known as --ftp-ssl (Added in 7.11.0). That
+      option name can still be used but will be removed in a future version.
+
+      Added in 7.20.0.
+
+--trace <file>
+      Enables a full trace dump of all incoming and outgoing data, including
+      descriptive information, to the given output file. Use "-" as filename
+      to have the output sent to stdout. Use "%" as  filename  to  have  the
+      output sent to stderr.
+
+      If this option is used several times, the last one will be used.
+
+      This option overrides -v, --verbose and --trace-ascii.
+
+-T, --upload-file <file>
+      This transfers the specified local file to the remote URL. If there is
+      no  file  part  in  the specified URL, curl will append the local file
+      name. NOTE that you must use a trailing / on the last directory to re‐
+      ally  prove to Curl that there is no file name or curl will think that
+      your last directory name is the remote file name  to  use.  That  will
+      most  likely cause the upload operation to fail. If this is used on an
+      HTTP(S) server, the PUT command will be used.
+
+      Use the file name "-" (a single dash) to use stdin instead of a  given
+      file.   Alternately, the file name "." (a single period) may be speci‐
+      fied instead of "-" to use stdin in non-blocking mode to allow reading
+      server output while stdin is being uploaded.
+
+      You  can  specify  one  -T,  --upload-file for each URL on the command
+      line. Each -T, --upload-file + URL pair specifies what to  upload  and
+      to where. curl also supports "globbing" of the -T, --upload-file argu‐
+      ment, meaning that you can upload multiple files to a  single  URL  by
+      using the same URL globbing style supported in the URL, like this:
+
+       curl --upload-file "{file1,file2}" http://www.example.com
+
+      or even
+
+       curl -T "img[1-1000].png" ftp://ftp.example.com/upload/
+
+      When  uploading  to an SMTP server: the uploaded data is assumed to be
+      RFC 5322 formatted. It has to feature the necessary set of headers and
+      mail  body  formatted correctly by the user as curl will not transcode
+      nor encode it further in any way.
+
+-u, --user <user:password>
+      Specify the user name and password to use for  server  authentication.
+      Overrides -n, --netrc and --netrc-optional.
+
+      If you simply specify the user name, curl will prompt for a password.
+
+      The  user  name  and  passwords are split up on the first colon, which
+      makes it impossible to use a colon in the user name with this  option.
+      The password can, still.
+
+      On  systems  where  it works, curl will hide the given option argument
+      from process listings. This is not enough to protect credentials  from
+      possibly  getting  seen by other users on the same system as they will
+      still be visible for a brief moment  before  cleared.  Such  sensitive
+      data should be retrieved from a file instead or similar and never used
+      in clear text in a command line.
+
+      When using Kerberos V5 with a Windows based server you should  include
+      the  Windows  domain name in the user name, in order for the server to
+      successfully obtain a Kerberos Ticket. If you don't then  the  initial
+      authentication handshake may fail.
+
+      When  using  NTLM,  the  user name can be specified simply as the user
+      name, without the domain, if there is a single domain  and  forest  in
+      your setup for example.
+
+      To  specify  the  domain  name use either Down-Level Logon Name or UPN
+      (User Principal Name) formats. For example, EXAMPLE\user and  user@ex‐
+      ample.com respectively.
+
+      If you use a Windows SSPI-enabled curl binary and perform Kerberos V5,
+      Negotiate, NTLM or Digest authentication then you can tell curl to se‐
+      lect  the user name and password from your environment by specifying a
+      single colon with this option: "-u :".
+
+      If this option is used several times, the last one will be used.
+
+-v, --verbose
+      Makes curl verbose during the operation. Useful for debugging and see‐
+      ing  what's  going on "under the hood". A line starting with '>' means
+      "header data" sent by curl, '<' means "header data" received  by  curl
+      that is hidden in normal cases, and a line starting with '*' means ad‐
+      ditional info provided by curl.
+
+      If you only want HTTP headers in the output, -i,  --include  might  be
+      the option you're looking for.
+
+      If  you  think this option still doesn't give you enough details, con‐
+      sider using --trace or --trace-ascii instead.
+
+      Use -s, --silent to make curl really quiet.
+
+      See also -i, --include. This option  overrides  --trace  and  --trace-
+      ascii.
+
+
+-V, --version
+      Displays information about curl and the libcurl version it uses.
+
+      The  first  line  includes the full version of curl, libcurl and
+      other 3rd party libraries linked with the executable.
+
+      The second line (starts with "Protocols:") shows  all  protocols
+      that libcurl reports to support.
+
+      The third line (starts with "Features:") shows specific features
+      libcurl reports to offer. Available features include:
+
+      IPv6   You can use IPv6 with this.
+
+      krb4   Krb4 for FTP is supported.
+
+      SSL    SSL versions of various protocols are supported, such  as
+             HTTPS, FTPS, POP3S and so on.
+
+      libz   Automatic  decompression of compressed files over HTTP is
+             supported.
+
+      NTLM   NTLM authentication is supported.
+
+      Debug  This curl uses a libcurl built with Debug.  This  enables
+             more  error-tracking  and memory debugging etc. For curl-
+             developers only!
+
+      AsynchDNS
+             This curl uses asynchronous name  resolves.  Asynchronous
+             name  resolves can be done using either the c-ares or the
+             threaded resolver backends.
+
+      SPNEGO SPNEGO authentication is supported.
+
+      Largefile
+             This curl supports transfers of large files, files larger
+             than 2GB.
+
+      IDN    This curl supports IDN - international domain names.
+
+      GSS-API
+             GSS-API is supported.
+
+      SSPI   SSPI is supported.
+
+      TLS-SRP
+             SRP  (Secure Remote Password) authentication is supported
+             for TLS.
+
+      HTTP2  HTTP/2 support has been built-in.
+
+      UnixSockets
+             Unix sockets support is provided.
+
+      HTTPS-proxy
+             This curl is built to support HTTPS proxy.
+
+      Metalink
+             This curl supports Metalink (both version 3  and  4  (RFC
+             5854)),  which  describes  mirrors and hashes.  curl will
+             use mirrors for failover if there are errors (such as the
+             file or server not being available).
+
+      PSL    PSL  is  short for Public Suffix List and means that this
+             curl has been built with  knowledge  about  "public  suf‐
+             fixes".
+
+      MultiSSL
+             This curl supports multiple TLS backends.
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+For help on a specific category, use --help-CATEGORY where CATEGORY is one of:
+  all, clientauth, debug, encryption, net, output, post, proxy, resolv,
+  request, script, serverauth, 
+or a protocol scheme:
+  dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, ldaps, pop3,
+  pop3s, rtsp, scp, sftp, smb, smbs, smtp, smtps, telnet, tftp,
+If multiple help options are given the result is the intersection.
+Search the manual text for matching options with --help-search KEYWORD
+For detailed option help, use --verbose or -v with a --help option.
+For the curl manual, use --manual.
+
+Basic options:
+     --anyauth       Pick any authentication method
+ -a, --append        Append to target file when uploading
+     --basic         Use HTTP Basic Authentication
+ -K, --config <file> Read config from a file
+     --connect-timeout <seconds> Maximum time allowed for connection
+ -b, --cookie <data|filename> Send cookies from string/file
+ -c, --cookie-jar <filename> Write cookies to <filename> after operation
+ -d, --data <data>   HTTP POST data
+ -f, --fail          Fail silently (no output at all) on HTTP errors
+     --fail-early    Fail on first transfer error, do not continue
+ -F, --form <name=content> Specify multipart MIME data
+     --form-string <name=string> Specify multipart MIME data
+ -G, --get           Put the post data in the URL and use GET
+ -g, --globoff       Disable URL sequences and ranges using {} and []
+ -I, --head          Show document info only
+ -H, --header <header/@file> Pass custom header(s) to server
+ -h, --help          This help text
+ -k, --insecure      Allow insecure server connections when using SSL
+ -L, --location      Follow redirects
+ -M, --manual        Display the full manual
+ -m, --max-time <seconds> Maximum time allowed for the transfer
+ -n, --netrc         Must read .netrc for user name and password
+ -o, --output <file> Write to file instead of stdout
+ -#, --progress-bar  Display transfer progress as a bar
+ -x, --proxy [protocol://]host[:port] Use this proxy
+ -U, --proxy-user <user:password> Proxy user and password
+     --retry <num>   Retry request if transient problems occur
+ -s, --silent        Silent mode
+     --ssl           Try SSL/TLS
+     --trace <file>  Write a debug trace to FILE
+ -T, --upload-file <file> Transfer local FILE to destination
+ -u, --user <user:password> Server user and password
+ -v, --verbose       Make the operation more talkative
+ -V, --version       Show version number and quit
+EOF
+            fi
+       exit 0
+       ;;
+
+        clientauth+ftps)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Verbose help TBD
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+These options affect client authentication with ftps:
+ -E, --cert <certificate[:password]> Client certificate file and password
+     --cert-type <type> Certificate file type (DER/PEM/ENG)
+     --delegation <LEVEL> GSS-API delegation permission
+     --disallow-username-in-url Disallow username in url
+     --ftp-account <data> Account data string
+     --ftp-alternative-to-user <command> String to replace USER [name]
+     --key <key>     Private key file name
+     --key-type <type> Private key file type (DER/PEM/ENG)
+     --krb <level>   Enable Kerberos with security <level>
+     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
+ -n, --netrc         Must read .netrc for user name and password
+     --pass <phrase> Pass phrase for the private key
+     --proxy-anyauth Pick any proxy authentication method
+     --proxy-basic   Use Basic authentication on the proxy
+     --proxy-cert <cert[:passwd]> Set client certificate for proxy
+     --proxy-cert-type <type> Client certificate type for HTTPS proxy
+     --proxy-digest  Use Digest authentication on the proxy
+     --proxy-key <key> Private key for HTTPS proxy
+     --proxy-key-type <type> Private key file type for proxy
+     --proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
+     --proxy-ntlm    Use NTLM authentication on the proxy
+     --proxy-pass <phrase> Pass phrase for the private key for HTTPS proxy
+     --proxy-service-name <name> SPNEGO proxy service name
+     --proxy-tlsauthtype <type> TLS authentication type for HTTPS proxy
+     --proxy-tlspassword <string> TLS password for HTTPS proxy
+     --proxy-tlsuser <name> TLS username for HTTPS proxy
+ -U, --proxy-user <user:password> Proxy user and password
+     --service-name <name> SPNEGO service name
+     --socks5-basic  Enable username/password auth for SOCKS5 proxies
+     --socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
+     --socks5-gssapi-nec Compatibility with NEC SOCKS5 server
+     --socks5-gssapi-service <name> SOCKS5 proxy service name for GSS-API
+     --tlsauthtype <type> TLS authentication type
+     --tlspassword   TLS password
+     --tlsuser <name> TLS user name
+ -u, --user <user:password> Server user and password
+EOF
+            fi
+       exit 0
+       ;;
+
+
+        clientauth)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Verbose help TBD
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+These options affect transport- or protocol-level client authentication:
+     --anyauth       Pick any authentication method
+     --basic         Use HTTP Basic Authentication
+ -E, --cert <certificate[:password]> Client certificate file and password
+     --cert-type <type> Certificate file type (DER/PEM/ENG)
+     --delegation <LEVEL> GSS-API delegation permission
+     --digest        Use HTTP Digest Authentication
+     --disallow-username-in-url Disallow username in url
+     --ftp-account <data> Account data string
+     --ftp-alternative-to-user <command> String to replace USER [name]
+     --key <key>     Private key file name
+     --key-type <type> Private key file type (DER/PEM/ENG)
+     --krb <level>   Enable Kerberos with security <level>
+     --login-options <options> Server login options
+     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
+ -n, --netrc         Must read .netrc for user name and password
+     --ntlm          Use HTTP NTLM authentication
+     --ntlm-wb       Use HTTP NTLM authentication with winbind
+     --oauth2-bearer <token> OAuth 2 Bearer Token
+     --pass <phrase> Pass phrase for the private key
+     --proxy-anyauth Pick any proxy authentication method
+     --proxy-basic   Use Basic authentication on the proxy
+     --proxy-cert <cert[:passwd]> Set client certificate for proxy
+     --proxy-cert-type <type> Client certificate type for HTTPS proxy
+     --proxy-digest  Use Digest authentication on the proxy
+     --proxy-key <key> Private key for HTTPS proxy
+     --proxy-key-type <type> Private key file type for proxy
+     --proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
+     --proxy-ntlm    Use NTLM authentication on the proxy
+     --proxy-pass <phrase> Pass phrase for the private key for HTTPS proxy
+     --proxy-service-name <name> SPNEGO proxy service name
+     --proxy-tlsauthtype <type> TLS authentication type for HTTPS proxy
+     --proxy-tlspassword <string> TLS password for HTTPS proxy
+     --proxy-tlsuser <name> TLS username for HTTPS proxy
+ -U, --proxy-user <user:password> Proxy user and password
+     --pubkey <key>  SSH Public key file name
+     --sasl-authzid <identity>  Use this identity to act as during SASL PLAIN authentication
+     --sasl-ir       Enable initial response in SASL authentication
+     --service-name <name> SPNEGO service name
+     --socks5-basic  Enable username/password auth for SOCKS5 proxies
+     --socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
+     --socks5-gssapi-nec Compatibility with NEC SOCKS5 server
+     --socks5-gssapi-service <name> SOCKS5 proxy service name for GSS-API
+     --tlsauthtype <type> TLS authentication type
+     --tlspassword   TLS password
+     --tlsuser <name> TLS user name
+ -u, --user <user:password> Server user and password
+EOF
+            fi
+       exit 0
+       ;;
+
+        serverauth)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Verbose help TBD
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+These options affect transport- or protocol-level server authentication:
+Usage: curl [options...] <url>
+     --cacert <file> CA certificate to verify peer against
+     --capath <dir>  CA directory to verify peer against
+     --cert-status   Verify the status of the server certificate
+     --crlfile <file> Get a CRL list in PEM format from the given file
+     --delegation <LEVEL> GSS-API delegation permission
+     --hostpubmd5 <md5> Acceptable MD5 hash of the host public key
+ -k, --insecure      Allow insecure server connections when using SSL
+     --krb <level>   Enable Kerberos with security <level>
+     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
+     --pinnedpubkey <hashes> FILE/HASHES Public key to verify peer against
+     --proxy-cacert <file> CA certificate to verify peer against for proxy
+     --proxy-capath <dir> CA directory to verify peer against for proxy
+     --proxy-crlfile <file> Set a CRL list for proxy
+     --proxy-insecure Do HTTPS proxy connections without verifying the proxy
+     --proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
+     --proxy-pinnedpubkey <hashes> FILE/HASHES public key to verify proxy with
+     --proxy-service-name <name> SPNEGO proxy service name
+     --service-name <name> SPNEGO service name
+     --socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
+     --ssl-revoke-best-effort Ignore revocation offline or missing revocation list errors (Schannel)
+EOF
+            fi
+       exit 0
+       ;;
+
+
+        all)
+            if [[ -n "$VERBOSE" ]]; then
+                curl --manual
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+     --abstract-unix-socket <path> Connect via abstract Unix domain socket
+     --alt-svc <file name> Enable alt-svc with this cache file
+     --anyauth       Pick any authentication method
+ -a, --append        Append to target file when uploading
+     --basic         Use HTTP Basic Authentication
+     --cacert <file> CA certificate to verify peer against
+     --capath <dir>  CA directory to verify peer against
+ -E, --cert <certificate[:password]> Client certificate file and password
+     --cert-status   Verify the status of the server certificate
+     --cert-type <type> Certificate file type (DER/PEM/ENG)
+     --ciphers <list of ciphers> SSL ciphers to use
+     --compressed    Request compressed response
+     --compressed-ssh Enable SSH compression
+ -K, --config <file> Read config from a file
+     --connect-timeout <seconds> Maximum time allowed for connection
+     --connect-to <HOST1:PORT1:HOST2:PORT2> Connect to host
+ -C, --continue-at <offset> Resumed transfer offset
+ -b, --cookie <data|filename> Send cookies from string/file
+ -c, --cookie-jar <filename> Write cookies to <filename> after operation
+     --create-dirs   Create necessary local directory hierarchy
+     --crlf          Convert LF to CRLF in upload
+     --crlfile <file> Get a CRL list in PEM format from the given file
+ -d, --data <data>   HTTP POST data
+     --data-ascii <data> HTTP POST ASCII data
+     --data-binary <data> HTTP POST binary data
+     --data-raw <data> HTTP POST data, '@' allowed
+     --data-urlencode <data> HTTP POST data url encoded
+     --delegation <LEVEL> GSS-API delegation permission
+     --digest        Use HTTP Digest Authentication
+ -q, --disable       Disable .curlrc
+     --disable-eprt  Inhibit using EPRT or LPRT
+     --disable-epsv  Inhibit using EPSV
+     --disallow-username-in-url Disallow username in url
+     --dns-interface <interface> Interface to use for DNS requests
+     --dns-ipv4-addr <address> IPv4 address to use for DNS requests
+     --dns-ipv6-addr <address> IPv6 address to use for DNS requests
+     --dns-servers <addresses> DNS server addrs to use
+     --doh-url <URL> Resolve host names over DOH
+ -D, --dump-header <filename> Write the received headers to <filename>
+     --egd-file <file> EGD socket path for random data
+     --engine <name> Crypto engine to use
+     --etag-save <file> Get an ETag from response header and save it to a FILE
+     --etag-compare <file> Get an ETag from a file and send a conditional request
+     --expect100-timeout <seconds> How long to wait for 100-continue
+ -f, --fail          Fail silently (no output at all) on HTTP errors
+     --fail-early    Fail on first transfer error, do not continue
+     --false-start   Enable TLS False Start
+ -F, --form <name=content> Specify multipart MIME data
+     --form-string <name=string> Specify multipart MIME data
+     --ftp-account <data> Account data string
+     --ftp-alternative-to-user <command> String to replace USER [name]
+     --ftp-create-dirs Create the remote dirs if not present
+     --ftp-method <method> Control CWD usage
+     --ftp-pasv      Use PASV/EPSV instead of PORT
+ -P, --ftp-port <address> Use PORT instead of PASV
+     --ftp-pret      Send PRET before PASV
+     --ftp-skip-pasv-ip Skip the IP address for PASV
+     --ftp-ssl-ccc   Send CCC after authenticating
+     --ftp-ssl-ccc-mode <active/passive> Set CCC mode
+     --ftp-ssl-control Require SSL/TLS for FTP login, clear for transfer
+ -G, --get           Put the post data in the URL and use GET
+ -g, --globoff       Disable URL sequences and ranges using {} and []
+     --happy-eyeballs-timeout-ms <milliseconds> How long to wait in milliseconds for IPv6 before trying IPv4
+     --haproxy-protocol Send HAProxy PROXY protocol v1 header
+ -I, --head          Show document info only
+ -H, --header <header/@file> Pass custom header(s) to server
+ -h, --help          This help text
+     --hostpubmd5 <md5> Acceptable MD5 hash of the host public key
+     --http0.9       Allow HTTP 0.9 responses
+ -0, --http1.0       Use HTTP 1.0
+     --http1.1       Use HTTP 1.1
+     --http2         Use HTTP 2
+     --http2-prior-knowledge Use HTTP 2 without HTTP/1.1 Upgrade
+     --http3         Use HTTP v3
+     --ignore-content-length Ignore the size of the remote resource
+ -i, --include       Include protocol response headers in the output
+ -k, --insecure      Allow insecure server connections when using SSL
+     --interface <name> Use network INTERFACE (or address)
+ -4, --ipv4          Resolve names to IPv4 addresses
+ -6, --ipv6          Resolve names to IPv6 addresses
+ -j, --junk-session-cookies Ignore session cookies read from file
+     --keepalive-time <seconds> Interval time for keepalive probes
+     --key <key>     Private key file name
+     --key-type <type> Private key file type (DER/PEM/ENG)
+     --krb <level>   Enable Kerberos with security <level>
+     --libcurl <file> Dump libcurl equivalent code of this command line
+     --limit-rate <speed> Limit transfer speed to RATE
+ -l, --list-only     List only mode
+     --local-port <num/range> Force use of RANGE for local port numbers
+ -L, --location      Follow redirects
+     --location-trusted Like --location, and send auth to other hosts
+     --login-options <options> Server login options
+     --mail-auth <address> Originator address of the original email
+     --mail-from <address> Mail from this address
+     --mail-rcpt <address> Mail to this address
+     --mail-rcpt-allowfails Allow RCPT TO command to fail for some recipients
+ -M, --manual        Display the full manual
+     --max-filesize <bytes> Maximum file size to download
+     --max-redirs <num> Maximum number of redirects allowed
+ -m, --max-time <seconds> Maximum time allowed for the transfer
+     --metalink      Process given URLs as metalink XML file
+     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
+ -n, --netrc         Must read .netrc for user name and password
+     --netrc-file <filename> Specify FILE for netrc
+     --netrc-optional Use either .netrc or URL
+ -:, --next          Make next URL use its separate set of options
+     --no-alpn       Disable the ALPN TLS extension
+ -N, --no-buffer     Disable buffering of the output stream
+     --no-keepalive  Disable TCP keepalive on the connection
+     --no-npn        Disable the NPN TLS extension
+     --no-progress-meter Do not show the progress meter
+     --no-sessionid  Disable SSL session-ID reusing
+     --noproxy <no-proxy-list> List of hosts which do not use proxy
+     --ntlm          Use HTTP NTLM authentication
+     --ntlm-wb       Use HTTP NTLM authentication with winbind
+     --oauth2-bearer <token> OAuth 2 Bearer Token
+ -o, --output <file> Write to file instead of stdout
+ -Z, --parallel      Perform transfers in parallel
+     --parallel-immediate Do not wait for multiplexing (with --parallel)
+     --parallel-max  Maximum concurrency for parallel transfers
+     --pass <phrase> Pass phrase for the private key
+     --path-as-is    Do not squash .. sequences in URL path
+     --pinnedpubkey <hashes> FILE/HASHES Public key to verify peer against
+     --post301       Do not switch to GET after following a 301
+     --post302       Do not switch to GET after following a 302
+     --post303       Do not switch to GET after following a 303
+     --preproxy [protocol://]host[:port] Use this proxy first
+ -#, --progress-bar  Display transfer progress as a bar
+     --proto <protocols> Enable/disable PROTOCOLS
+     --proto-default <protocol> Use PROTOCOL for any URL missing a scheme
+     --proto-redir <protocols> Enable/disable PROTOCOLS on redirect
+ -x, --proxy [protocol://]host[:port] Use this proxy
+     --proxy-anyauth Pick any proxy authentication method
+     --proxy-basic   Use Basic authentication on the proxy
+     --proxy-cacert <file> CA certificate to verify peer against for proxy
+     --proxy-capath <dir> CA directory to verify peer against for proxy
+     --proxy-cert <cert[:passwd]> Set client certificate for proxy
+     --proxy-cert-type <type> Client certificate type for HTTPS proxy
+     --proxy-ciphers <list> SSL ciphers to use for proxy
+     --proxy-crlfile <file> Set a CRL list for proxy
+     --proxy-digest  Use Digest authentication on the proxy
+     --proxy-header <header/@file> Pass custom header(s) to proxy
+     --proxy-insecure Do HTTPS proxy connections without verifying the proxy
+     --proxy-key <key> Private key for HTTPS proxy
+     --proxy-key-type <type> Private key file type for proxy
+     --proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
+     --proxy-ntlm    Use NTLM authentication on the proxy
+     --proxy-pass <phrase> Pass phrase for the private key for HTTPS proxy
+     --proxy-pinnedpubkey <hashes> FILE/HASHES public key to verify proxy with
+     --proxy-service-name <name> SPNEGO proxy service name
+     --proxy-ssl-allow-beast Allow security flaw for interop for HTTPS proxy
+     --proxy-tls13-ciphers <list> TLS 1.3 ciphersuites for proxy (OpenSSL)
+     --proxy-tlsauthtype <type> TLS authentication type for HTTPS proxy
+     --proxy-tlspassword <string> TLS password for HTTPS proxy
+     --proxy-tlsuser <name> TLS username for HTTPS proxy
+     --proxy-tlsv1   Use TLSv1 for HTTPS proxy
+ -U, --proxy-user <user:password> Proxy user and password
+     --proxy1.0 <host[:port]> Use HTTP/1.0 proxy on given port
+ -p, --proxytunnel   Operate through an HTTP proxy tunnel (using CONNECT)
+     --pubkey <key>  SSH Public key file name
+ -Q, --quote         Send command(s) to server before transfer
+     --random-file <file> File for reading random data from
+ -r, --range <range> Retrieve only the bytes within RANGE
+     --raw           Do HTTP "raw"; no transfer decoding
+ -e, --referer <URL> Referrer URL
+ -J, --remote-header-name Use the header-provided filename
+ -O, --remote-name   Write output to a file named as the remote file
+     --remote-name-all Use the remote file name for all URLs
+ -R, --remote-time   Set the remote file's time on the local output
+ -X, --request <command> Specify request command to use
+     --request-target Specify the target for this request
+     --resolve <host:port:address[,address]...> Resolve the host+port to this address
+     --retry <num>   Retry request if transient problems occur
+     --retry-connrefused Retry on connection refused (use with --retry)
+     --retry-delay <seconds> Wait time between retries
+     --retry-max-time <seconds> Retry only within this period
+     --sasl-authzid <identity>  Use this identity to act as during SASL PLAIN authentication
+     --sasl-ir       Enable initial response in SASL authentication
+     --service-name <name> SPNEGO service name
+ -S, --show-error    Show error even when -s is used
+ -s, --silent        Silent mode
+     --socks4 <host[:port]> SOCKS4 proxy on given host + port
+     --socks4a <host[:port]> SOCKS4a proxy on given host + port
+     --socks5 <host[:port]> SOCKS5 proxy on given host + port
+     --socks5-basic  Enable username/password auth for SOCKS5 proxies
+     --socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
+     --socks5-gssapi-nec Compatibility with NEC SOCKS5 server
+     --socks5-gssapi-service <name> SOCKS5 proxy service name for GSS-API
+     --socks5-hostname <host[:port]> SOCKS5 proxy, pass host name to proxy
+ -Y, --speed-limit <speed> Stop transfers slower than this
+ -y, --speed-time <seconds> Trigger 'speed-limit' abort after this time
+     --ssl           Try SSL/TLS
+     --ssl-allow-beast Allow security flaw to improve interop
+     --ssl-no-revoke Disable cert revocation checks (Schannel)
+     --ssl-revoke-best-effort Ignore revocation offline or missing revocation list errors (Schannel)
+     --ssl-reqd      Require SSL/TLS
+ -2, --sslv2         Use SSLv2
+ -3, --sslv3         Use SSLv3
+     --stderr        Where to redirect stderr
+     --styled-output Enable styled output for HTTP headers
+     --suppress-connect-headers Suppress proxy CONNECT response headers
+     --tcp-fastopen  Use TCP Fast Open
+     --tcp-nodelay   Use the TCP_NODELAY option
+ -t, --telnet-option <opt=val> Set telnet option
+     --tftp-blksize <value> Set TFTP BLKSIZE option
+     --tftp-no-options Do not send any TFTP options
+ -z, --time-cond <time> Transfer based on a time condition
+     --tls-max <VERSION> Set maximum allowed TLS version
+     --tls13-ciphers <list> TLS 1.3 ciphersuites (OpenSSL)
+     --tlsauthtype <type> TLS authentication type
+     --tlspassword   TLS password
+     --tlsuser <name> TLS user name
+ -1, --tlsv1         Use TLSv1.0 or greater
+     --tlsv1.0       Use TLSv1.0 or greater
+     --tlsv1.1       Use TLSv1.1 or greater
+     --tlsv1.2       Use TLSv1.2 or greater
+     --tlsv1.3       Use TLSv1.3 or greater
+     --tr-encoding   Request compressed transfer encoding
+     --trace <file>  Write a debug trace to FILE
+     --trace-ascii <file> Like --trace, but without hex output
+     --trace-time    Add time stamps to trace/verbose output
+     --unix-socket <path> Connect through this Unix domain socket
+ -T, --upload-file <file> Transfer local FILE to destination
+     --url <url>     URL to work with
+ -B, --use-ascii     Use ASCII/text transfer
+ -u, --user <user:password> Server user and password
+ -A, --user-agent <name> Send User-Agent <name> to server
+ -v, --verbose       Make the operation more talkative
+ -V, --version       Show version number and quit
+ -w, --write-out <format> Use output FORMAT after completion
+     --xattr         Store metadata in extended file attributes
+EOF
+            fi
+       exit 0
+       ;;
+
+        debug)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+These options are used for debugging a transfer:
+
+-D, --dump-header <filename>
+      (HTTP FTP) Write the received protocol headers to the  specified
+      file.
+
+      This  option  is handy to use when you want to store the headers
+      that an HTTP site sends to you. Cookies from the  headers  could
+      then  be  read  in  a  second  curl  invocation by using the -b,
+      --cookie option! The -c, --cookie-jar option is a better way  to
+      store cookies.
+
+      If  no  headers are received, the use of this option will create
+      an empty file.
+
+      When used in FTP, the FTP server response lines  are  considered
+      being "headers" and thus are saved there.
+
+      If this option is used several times, the last one will be used.
+
+      See also -o, --output.
+
+-I, --head
+      (HTTP FTP FILE) Fetch the headers only! HTTP-servers feature the
+      command  HEAD which this uses to get nothing but the header of a
+      document. When used on an FTP or FILE file,  curl  displays  the
+      file size and last modification time only.
+
+-i, --include
+      Include  the  HTTP  response headers in the output. The HTTP re-
+      sponse headers can include things  like  server  name,  cookies,
+      date of the document, HTTP version and more...
+
+      To view the request headers, consider the -v, --verbose option.
+
+      See also -v, --verbose.
+
+--stderr
+      Redirect all writes to stderr to the specified file instead.  If
+      the file name is a plain '-', it is instead written to stdout.
+
+      If this option is used several times, the last one will be used.
+
+      See also -v, --verbose and -s, --silent.
+
+--trace-ascii <file>
+      Enables a full trace dump of all incoming and outgoing data, in-
+      cluding  descriptive  information, to the given output file. Use
+      "-" as filename to have the output sent to stdout.
+
+      This is very similar to --trace, but leaves out the hex part and
+      only  shows  the ASCII part of the dump. It makes smaller output
+      that might be easier to read for untrained humans.
+
+      If this option is used several times, the last one will be used.
+
+      This option overrides --trace and -v, --verbose.
+
+--trace-time
+      Prepends a time stamp to each trace or verbose  line  that  curl
+      displays.
+
+      Added in 7.14.0.
+
+--trace <file>
+      Enables a full trace dump of all incoming and outgoing data, in-
+      cluding descriptive information, to the given output  file.  Use
+      "-"  as  filename  to have the output sent to stdout. Use "%" as
+      filename to have the output sent to stderr.
+
+      If this option is used several times, the last one will be used.
+
+      This option overrides -v, --verbose and --trace-ascii.
+
+-v, --verbose
+      Makes curl verbose during the operation.  Useful  for  debugging
+      and  seeing  what's  going  on "under the hood". A line starting
+      with '>' means "header data" sent by  curl,  '<'  means  "header
+      data"  received  by  curl  that is hidden in normal cases, and a
+      line starting with '*' means additional info provided by curl.
+
+      If you only want HTTP headers in the output, -i, --include might
+      be the option you're looking for.
+
+      If  you think this option still doesn't give you enough details,
+      consider using --trace or --trace-ascii instead.
+
+      Use -s, --silent to make curl really quiet.
+
+      See also  -i,  --include.  This  option  overrides  --trace  and
+      --trace-ascii.
+
+-V, --version
+      Displays information about curl and the libcurl version it uses.
+
+      The  first  line  includes the full version of curl, libcurl and
+      other 3rd party libraries linked with the executable.
+
+      The second line (starts with "Protocols:") shows  all  protocols
+      that libcurl reports to support.
+
+      The third line (starts with "Features:") shows specific features
+      libcurl reports to offer. Available features include:
+
+      IPv6   You can use IPv6 with this.
+
+      krb4   Krb4 for FTP is supported.
+
+      SSL    SSL versions of various protocols are supported, such  as
+             HTTPS, FTPS, POP3S and so on.
+
+      libz   Automatic  decompression of compressed files over HTTP is
+             supported.
+
+      NTLM   NTLM authentication is supported.
+
+      Debug  This curl uses a libcurl built with Debug.  This  enables
+             more  error-tracking  and memory debugging etc. For curl-
+             developers only!
+
+      AsynchDNS
+             This curl uses asynchronous name  resolves.  Asynchronous
+             name  resolves can be done using either the c-ares or the
+             threaded resolver backends.
+
+      SPNEGO SPNEGO authentication is supported.
+
+      Largefile
+             This curl supports transfers of large files, files larger
+             than 2GB.
+
+      IDN    This curl supports IDN - international domain names.
+
+      GSS-API
+             GSS-API is supported.
+
+      SSPI   SSPI is supported.
+
+      TLS-SRP
+             SRP  (Secure Remote Password) authentication is supported
+             for TLS.
+
+      HTTP2  HTTP/2 support has been built-in.
+
+      UnixSockets
+             Unix sockets support is provided.
+
+      HTTPS-proxy
+             This curl is built to support HTTPS proxy.
+
+      Metalink
+             This curl supports Metalink (both version 3  and  4  (RFC
+             5854)),  which  describes  mirrors and hashes.  curl will
+             use mirrors for failover if there are errors (such as the
+             file or server not being available).
+
+      PSL    PSL  is  short for Public Suffix List and means that this
+             curl has been built with  knowledge  about  "public  suf‐
+             fixes".
+
+      MultiSSL
+             This curl supports multiple TLS backends.
+
+-w, --write-out <format>
+      Make curl display information on stdout after a completed trans‐
+      fer. The format is a string that may contain  plain  text  mixed
+      with  any  number of variables. The format can be specified as a
+      literal "string", or you can have curl read the  format  from  a
+      file  with  "@filename" and to tell curl to read the format from
+      stdin you write "@-".
+
+      The variables present in the output format will  be  substituted
+      by  the  value or text that curl thinks fit, as described below.
+      All variables are specified as %{variable_name} and to output  a
+      normal  % you just write them as %%. You can output a newline by
+      using \n, a carriage return with \r and a tab space with \t.
+
+      The output will be written to standard output, but this  can  be
+      switched to standard error by using %{stderr}.
+
+      NOTE: The %-symbol is a special symbol in the win32-environment,
+      where all occurrences of % must be doubled when using  this  op‐
+      tion.
+
+      The variables available are:
+
+      content_type   The  Content-Type  of  the requested document, if
+                     there was any.
+
+      filename_effective
+                     The ultimate filename that curl  writes  out  to.
+                     This  is only meaningful if curl is told to write
+                     to a file  with  the  -O,  --remote-name  or  -o,
+                     --output  option. It's most useful in combination
+                     with the -J, --remote-header-name option.  (Added
+                     in 7.26.0)
+
+      ftp_entry_path The initial path curl ended up in when logging on
+                     to the remote FTP server. (Added in 7.15.4)
+
+      http_code      The numerical response code that was found in the
+                     last  retrieved  HTTP(S)  or  FTP(s) transfer. In
+                     7.18.2 the alias response_code was added to  show
+                     the same info.
+
+      http_connect   The numerical code that was found in the last re‐
+                     sponse (from a proxy) to a curl CONNECT  request.
+                     (Added in 7.12.4)
+
+      http_version   The  http  version  that  was  effectively  used.
+                     (Added in 7.50.0)
+
+      local_ip       The IP address of the local end of the  most  re‐
+                     cently  done  connection  - can be either IPv4 or
+                     IPv6 (Added in 7.29.0)
+
+      local_port     The local port number of the most  recently  done
+                     connection (Added in 7.29.0)
+
+      num_connects   Number  of new connects made in the recent trans‐
+                     fer. (Added in 7.12.3)
+
+      num_redirects  Number of redirects that were followed in the re‐
+                     quest. (Added in 7.12.3)
+
+      proxy_ssl_verify_result
+                     The result of the HTTPS proxy's SSL peer certifi‐
+                     cate verification that was requested. 0 means the
+                     verification was successful. (Added in 7.52.0)
+
+      redirect_url   When an HTTP request was made without -L, --loca‐
+                     tion to follow redirects (or when --max-redir  is
+                     met),  this  variable  will show the actual URL a
+                     redirect would have gone to. (Added in 7.18.2)
+
+      remote_ip      The remote IP address of the most  recently  done
+                     connection - can be either IPv4 or IPv6 (Added in
+                     7.29.0)
+
+      remote_port    The remote port number of the most recently  done
+                     connection (Added in 7.29.0)
+
+      scheme         The  URL  scheme (sometimes called protocol) that
+                     was effectively used (Added in 7.52.0)
+
+      size_download  The total amount of bytes that were downloaded.
+
+      size_header    The total amount of bytes of the downloaded head‐
+                     ers.
+
+      size_request   The  total  amount of bytes that were sent in the
+                     HTTP request.
+
+      size_upload    The total amount of bytes that were uploaded.
+
+      speed_download The average download speed that curl measured for
+                     the complete download. Bytes per second.
+
+      speed_upload   The  average  upload speed that curl measured for
+                     the complete upload. Bytes per second.
+
+      ssl_verify_result
+                     The result of the SSL peer certificate  verifica‐
+                     tion that was requested. 0 means the verification
+                     was successful. (Added in 7.19.0)
+
+      stderr         From this point on, the  -w,  --write-out  output
+                     will  be  written  to  standard  error. (Added in
+                     7.63.0)
+
+      stdout         From this point on, the  -w,  --write-out  output
+                     will  be written to standard output.  This is the
+                     default, but can be used  to  switch  back  after
+                     switching to stderr.  (Added in 7.63.0)
+
+      time_appconnect
+                     The  time, in seconds, it took from the start un‐
+                     til the SSL/SSH/etc connect/handshake to the  re‐
+                     mote host was completed. (Added in 7.19.0)
+
+      time_connect   The  time, in seconds, it took from the start un‐
+                     til the TCP connect to the remote host (or proxy)
+                     was completed.
+
+      time_namelookup
+                     The  time, in seconds, it took from the start un‐
+                     til the name resolving was completed.
+
+      time_pretransfer
+                     The time, in seconds, it took from the start  un‐
+                     til  the  file  transfer was just about to begin.
+                     This includes all pre-transfer commands and nego‐
+                     tiations that are specific to the particular pro‐
+                     tocol(s) involved.
+
+      time_redirect  The time, in seconds, it took for all redirection
+                     steps including name lookup, connect, pretransfer
+                     and transfer before  the  final  transaction  was
+                     started.  time_redirect shows the complete execu‐
+                     tion time for multiple  redirections.  (Added  in
+                     7.12.3)
+
+      time_starttransfer
+                     The  time, in seconds, it took from the start un‐
+                     til the first byte was just about  to  be  trans‐
+                     ferred.  This  includes time_pretransfer and also
+                     the time the server needed to calculate  the  re‐
+                     sult.
+
+      time_total     The  total time, in seconds, that the full opera‐
+                     tion lasted.
+
+      url_effective  The URL that was fetched last. This is most mean‐
+                     ingful  if  you've  told curl to follow location:
+                     headers.
+
+      If this option is used several times, the last one will be used.
+
+
+
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+ -D, --dump-header <filename> Write the received headers to <filename>
+ -I, --head          Show document info only
+ -i, --include       Include protocol response headers in the output
+     --stderr        Where to redirect stderr
+     --trace <file>  Write a debug trace to FILE
+     --trace-ascii <file> Like --trace, but without hex output
+     --trace-time    Add time stamps to trace/verbose output
+ -v, --verbose       Make the operation more talkative
+ -V, --version       Show version number and quit
+ -w, --write-out <format> Use output FORMAT after completion
+EOF
+            fi
+       exit 0
+       ;;
+
+        ftps)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Verbose help TBD
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+These options are valid on ftps transfers:
+ -a, --append        Append to target file when uploading
+     --cacert <file> CA certificate to verify peer against
+     --capath <dir>  CA directory to verify peer against
+ -E, --cert <certificate[:password]> Client certificate file and password
+     --cert-status   Verify the status of the server certificate
+     --cert-type <type> Certificate file type (DER/PEM/ENG)
+     --ciphers <list of ciphers> SSL ciphers to use
+ -K, --config <file> Read config from a file
+     --connect-timeout <seconds> Maximum time allowed for connection
+     --connect-to <HOST1:PORT1:HOST2:PORT2> Connect to host
+ -C, --continue-at <offset> Resumed transfer offset
+     --create-dirs   Create necessary local directory hierarchy
+     --crlf          Convert LF to CRLF in upload
+     --crlfile <file> Get a CRL list in PEM format from the given file
+     --delegation <LEVEL> GSS-API delegation permission
+ -q, --disable       Disable .curlrc
+     --disable-eprt  Inhibit using EPRT or LPRT
+     --disable-epsv  Inhibit using EPSV
+     --disallow-username-in-url Disallow username in url
+     --dns-interface <interface> Interface to use for DNS requests
+     --dns-ipv4-addr <address> IPv4 address to use for DNS requests
+     --dns-ipv6-addr <address> IPv6 address to use for DNS requests
+     --dns-servers <addresses> DNS server addrs to use
+     --doh-url <URL> Resolve host names over DOH
+ -D, --dump-header <filename> Write the received headers to <filename>
+     --egd-file <file> EGD socket path for random data
+     --engine <name> Crypto engine to use
+ -f, --fail          Fail silently (no output at all) on HTTP errors
+     --fail-early    Fail on first transfer error, do not continue
+     --false-start   Enable TLS False Start
+     --ftp-account <data> Account data string
+     --ftp-alternative-to-user <command> String to replace USER [name]
+     --ftp-create-dirs Create the remote dirs if not present
+     --ftp-method <method> Control CWD usage
+     --ftp-pasv      Use PASV/EPSV instead of PORT
+ -P, --ftp-port <address> Use PORT instead of PASV
+     --ftp-pret      Send PRET before PASV
+     --ftp-skip-pasv-ip Skip the IP address for PASV
+     --ftp-ssl-ccc   Send CCC after authenticating
+     --ftp-ssl-ccc-mode <active/passive> Set CCC mode
+     --ftp-ssl-control Require SSL/TLS for FTP login, clear for transfer
+ -g, --globoff       Disable URL sequences and ranges using {} and []
+     --happy-eyeballs-timeout-ms <milliseconds> How long to wait in milliseconds for IPv6 before trying IPv4
+     --haproxy-protocol Send HAProxy PROXY protocol v1 header
+ -I, --head          Show document info only
+     --ignore-content-length Ignore the size of the remote resource
+ -i, --include       Include protocol response headers in the output
+ -k, --insecure      Allow insecure server connections when using SSL
+     --interface <name> Use network INTERFACE (or address)
+ -4, --ipv4          Resolve names to IPv4 addresses
+ -6, --ipv6          Resolve names to IPv6 addresses
+     --keepalive-time <seconds> Interval time for keepalive probes
+     --key <key>     Private key file name
+     --key-type <type> Private key file type (DER/PEM/ENG)
+     --krb <level>   Enable Kerberos with security <level>
+     --libcurl <file> Dump libcurl equivalent code of this command line
+     --limit-rate <speed> Limit transfer speed to RATE
+ -l, --list-only     List only mode
+     --local-port <num/range> Force use of RANGE for local port numbers
+ -M, --manual        Display the full manual
+     --max-filesize <bytes> Maximum file size to download
+ -m, --max-time <seconds> Maximum time allowed for the transfer
+     --metalink      Process given URLs as metalink XML file
+     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
+ -n, --netrc         Must read .netrc for user name and password
+     --netrc-file <filename> Specify FILE for netrc
+     --netrc-optional Use either .netrc or URL
+ -:, --next          Make next URL use its separate set of options
+     --no-alpn       Disable the ALPN TLS extension
+ -N, --no-buffer     Disable buffering of the output stream
+     --no-keepalive  Disable TCP keepalive on the connection
+     --no-npn        Disable the NPN TLS extension
+     --no-progress-meter Do not show the progress meter
+     --no-sessionid  Disable SSL session-ID reusing
+     --noproxy <no-proxy-list> List of hosts which do not use proxy
+ -o, --output <file> Write to file instead of stdout
+ -Z, --parallel      Perform transfers in parallel
+     --parallel-immediate Do not wait for multiplexing (with --parallel)
+     --parallel-max  Maximum concurrency for parallel transfers
+     --pass <phrase> Pass phrase for the private key
+     --path-as-is    Do not squash .. sequences in URL path
+     --pinnedpubkey <hashes> FILE/HASHES Public key to verify peer against
+     --preproxy [protocol://]host[:port] Use this proxy first
+ -#, --progress-bar  Display transfer progress as a bar
+     --proto <protocols> Enable/disable PROTOCOLS
+     --proto-default <protocol> Use PROTOCOL for any URL missing a scheme
+     --proto-redir <protocols> Enable/disable PROTOCOLS on redirect
+ -x, --proxy [protocol://]host[:port] Use this proxy
+     --proxy-anyauth Pick any proxy authentication method
+     --proxy-basic   Use Basic authentication on the proxy
+     --proxy-cacert <file> CA certificate to verify peer against for proxy
+     --proxy-capath <dir> CA directory to verify peer against for proxy
+     --proxy-cert <cert[:passwd]> Set client certificate for proxy
+     --proxy-cert-type <type> Client certificate type for HTTPS proxy
+     --proxy-ciphers <list> SSL ciphers to use for proxy
+     --proxy-crlfile <file> Set a CRL list for proxy
+     --proxy-digest  Use Digest authentication on the proxy
+     --proxy-header <header/@file> Pass custom header(s) to proxy
+     --proxy-insecure Do HTTPS proxy connections without verifying the proxy
+     --proxy-key <key> Private key for HTTPS proxy
+     --proxy-key-type <type> Private key file type for proxy
+     --proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
+     --proxy-ntlm    Use NTLM authentication on the proxy
+     --proxy-pass <phrase> Pass phrase for the private key for HTTPS proxy
+     --proxy-pinnedpubkey <hashes> FILE/HASHES public key to verify proxy with
+     --proxy-service-name <name> SPNEGO proxy service name
+     --proxy-ssl-allow-beast Allow security flaw for interop for HTTPS proxy
+     --proxy-tls13-ciphers <list> TLS 1.3 ciphersuites for proxy (OpenSSL)
+     --proxy-tlsauthtype <type> TLS authentication type for HTTPS proxy
+     --proxy-tlspassword <string> TLS password for HTTPS proxy
+     --proxy-tlsuser <name> TLS username for HTTPS proxy
+     --proxy-tlsv1   Use TLSv1 for HTTPS proxy
+ -U, --proxy-user <user:password> Proxy user and password
+     --proxy1.0 <host[:port]> Use HTTP/1.0 proxy on given port
+ -p, --proxytunnel   Operate through an HTTP proxy tunnel (using CONNECT)
+ -Q, --quote         Send command(s) to server before transfer
+     --random-file <file> File for reading random data from
+ -r, --range <range> Retrieve only the bytes within RANGE
+ -e, --referer <URL> Referrer URL
+ -O, --remote-name   Write output to a file named as the remote file
+     --remote-name-all Use the remote file name for all URLs
+ -R, --remote-time   Set the remote file's time on the local output
+ -X, --request <command> Specify request command to use
+     --resolve <host:port:address[,address]...> Resolve the host+port to this address
+     --retry <num>   Retry request if transient problems occur
+     --retry-connrefused Retry on connection refused (use with --retry)
+     --retry-delay <seconds> Wait time between retries
+     --retry-max-time <seconds> Retry only within this period
+     --service-name <name> SPNEGO service name
+ -S, --show-error    Show error even when -s is used
+ -s, --silent        Silent mode
+     --socks4 <host[:port]> SOCKS4 proxy on given host + port
+     --socks4a <host[:port]> SOCKS4a proxy on given host + port
+     --socks5 <host[:port]> SOCKS5 proxy on given host + port
+     --socks5-basic  Enable username/password auth for SOCKS5 proxies
+     --socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
+     --socks5-gssapi-nec Compatibility with NEC SOCKS5 server
+     --socks5-gssapi-service <name> SOCKS5 proxy service name for GSS-API
+     --socks5-hostname <host[:port]> SOCKS5 proxy, pass host name to proxy
+ -Y, --speed-limit <speed> Stop transfers slower than this
+ -y, --speed-time <seconds> Trigger 'speed-limit' abort after this time
+     --ssl           Try SSL/TLS
+     --ssl-allow-beast Allow security flaw to improve interop
+     --ssl-no-revoke Disable cert revocation checks (Schannel)
+     --ssl-revoke-best-effort Ignore revocation offline or missing revocation list errors (Schannel)
+     --ssl-reqd      Require SSL/TLS
+ -2, --sslv2         Use SSLv2
+ -3, --sslv3         Use SSLv3
+     --stderr        Where to redirect stderr
+     --suppress-connect-headers Suppress proxy CONNECT response headers
+     --tcp-fastopen  Use TCP Fast Open
+     --tcp-nodelay   Use the TCP_NODELAY option
+ -z, --time-cond <time> Transfer based on a time condition
+     --tls-max <VERSION> Set maximum allowed TLS version
+     --tls13-ciphers <list> TLS 1.3 ciphersuites (OpenSSL)
+     --tlsauthtype <type> TLS authentication type
+     --tlspassword   TLS password
+     --tlsuser <name> TLS user name
+ -1, --tlsv1         Use TLSv1.0 or greater
+     --tlsv1.0       Use TLSv1.0 or greater
+     --tlsv1.1       Use TLSv1.1 or greater
+     --tlsv1.2       Use TLSv1.2 or greater
+     --tlsv1.3       Use TLSv1.3 or greater
+     --trace <file>  Write a debug trace to FILE
+     --trace-ascii <file> Like --trace, but without hex output
+     --trace-time    Add time stamps to trace/verbose output
+ -T, --upload-file <file> Transfer local FILE to destination
+     --url <url>     URL to work with
+ -B, --use-ascii     Use ASCII/text transfer
+ -u, --user <user:password> Server user and password
+ -A, --user-agent <name> Send User-Agent <name> to server
+ -v, --verbose       Make the operation more talkative
+ -V, --version       Show version number and quit
+ -w, --write-out <format> Use output FORMAT after completion
+     --xattr         Store metadata in extended file attributes
+EOF
+            fi
+       exit 0
+       ;;
+
+        https)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Verbose help TBD
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+These options are valid on https transfers:
+     --abstract-unix-socket <path> Connect via abstract Unix domain socket
+     --alt-svc <file name> Enable alt-svc with this cache file
+     --anyauth       Pick any authentication method
+ -a, --append        Append to target file when uploading
+     --basic         Use HTTP Basic Authentication
+     --cacert <file> CA certificate to verify peer against
+     --capath <dir>  CA directory to verify peer against
+ -E, --cert <certificate[:password]> Client certificate file and password
+     --cert-status   Verify the status of the server certificate
+     --cert-type <type> Certificate file type (DER/PEM/ENG)
+     --ciphers <list of ciphers> SSL ciphers to use
+     --compressed    Request compressed response
+ -K, --config <file> Read config from a file
+     --connect-timeout <seconds> Maximum time allowed for connection
+     --connect-to <HOST1:PORT1:HOST2:PORT2> Connect to host
+ -C, --continue-at <offset> Resumed transfer offset
+ -b, --cookie <data|filename> Send cookies from string/file
+ -c, --cookie-jar <filename> Write cookies to <filename> after operation
+     --create-dirs   Create necessary local directory hierarchy
+     --crlf          Convert LF to CRLF in upload
+     --crlfile <file> Get a CRL list in PEM format from the given file
+ -d, --data <data>   HTTP POST data
+     --data-ascii <data> HTTP POST ASCII data
+     --data-binary <data> HTTP POST binary data
+     --data-raw <data> HTTP POST data, '@' allowed
+     --data-urlencode <data> HTTP POST data url encoded
+     --delegation <LEVEL> GSS-API delegation permission
+     --digest        Use HTTP Digest Authentication
+ -q, --disable       Disable .curlrc
+     --disable-eprt  Inhibit using EPRT or LPRT
+     --disable-epsv  Inhibit using EPSV
+     --disallow-username-in-url Disallow username in url
+     --dns-interface <interface> Interface to use for DNS requests
+     --dns-ipv4-addr <address> IPv4 address to use for DNS requests
+     --dns-ipv6-addr <address> IPv6 address to use for DNS requests
+     --dns-servers <addresses> DNS server addrs to use
+     --doh-url <URL> Resolve host names over DOH
+ -D, --dump-header <filename> Write the received headers to <filename>
+     --egd-file <file> EGD socket path for random data
+     --engine <name> Crypto engine to use
+     --etag-save <file> Get an ETag from response header and save it to a FILE
+     --etag-compare <file> Get an ETag from a file and send a conditional request
+     --expect100-timeout <seconds> How long to wait for 100-continue
+ -f, --fail          Fail silently (no output at all) on HTTP errors
+     --fail-early    Fail on first transfer error, do not continue
+     --false-start   Enable TLS False Start
+ -F, --form <name=content> Specify multipart MIME data
+     --form-string <name=string> Specify multipart MIME data
+ -G, --get           Put the post data in the URL and use GET
+ -g, --globoff       Disable URL sequences and ranges using {} and []
+     --happy-eyeballs-timeout-ms <milliseconds> How long to wait in milliseconds for IPv6 before trying IPv4
+     --haproxy-protocol Send HAProxy PROXY protocol v1 header
+ -I, --head          Show document info only
+ -H, --header <header/@file> Pass custom header(s) to server
+ -h, --help          This help text
+     --http0.9       Allow HTTP 0.9 responses
+ -0, --http1.0       Use HTTP 1.0
+     --http1.1       Use HTTP 1.1
+     --http2         Use HTTP 2
+     --http2-prior-knowledge Use HTTP 2 without HTTP/1.1 Upgrade
+     --http3         Use HTTP v3
+     --ignore-content-length Ignore the size of the remote resource
+ -i, --include       Include protocol response headers in the output
+ -k, --insecure      Allow insecure server connections when using SSL
+     --interface <name> Use network INTERFACE (or address)
+ -4, --ipv4          Resolve names to IPv4 addresses
+ -6, --ipv6          Resolve names to IPv6 addresses
+ -j, --junk-session-cookies Ignore session cookies read from file
+     --keepalive-time <seconds> Interval time for keepalive probes
+     --key <key>     Private key file name
+     --key-type <type> Private key file type (DER/PEM/ENG)
+     --krb <level>   Enable Kerberos with security <level>
+     --libcurl <file> Dump libcurl equivalent code of this command line
+     --limit-rate <speed> Limit transfer speed to RATE
+     --local-port <num/range> Force use of RANGE for local port numbers
+ -L, --location      Follow redirects
+     --location-trusted Like --location, and send auth to other hosts
+ -M, --manual        Display the full manual
+     --max-filesize <bytes> Maximum file size to download
+     --max-redirs <num> Maximum number of redirects allowed
+ -m, --max-time <seconds> Maximum time allowed for the transfer
+     --metalink      Process given URLs as metalink XML file
+     --negotiate     Use HTTP Negotiate (SPNEGO) authentication
+ -n, --netrc         Must read .netrc for user name and password
+     --netrc-file <filename> Specify FILE for netrc
+     --netrc-optional Use either .netrc or URL
+ -:, --next          Make next URL use its separate set of options
+     --no-alpn       Disable the ALPN TLS extension
+ -N, --no-buffer     Disable buffering of the output stream
+     --no-keepalive  Disable TCP keepalive on the connection
+     --no-npn        Disable the NPN TLS extension
+     --no-progress-meter Do not show the progress meter
+     --no-sessionid  Disable SSL session-ID reusing
+     --noproxy <no-proxy-list> List of hosts which do not use proxy
+     --ntlm          Use HTTP NTLM authentication
+     --ntlm-wb       Use HTTP NTLM authentication with winbind
+     --oauth2-bearer <token> OAuth 2 Bearer Token
+ -o, --output <file> Write to file instead of stdout
+ -Z, --parallel      Perform transfers in parallel
+     --parallel-immediate Do not wait for multiplexing (with --parallel)
+     --parallel-max  Maximum concurrency for parallel transfers
+     --pass <phrase> Pass phrase for the private key
+     --path-as-is    Do not squash .. sequences in URL path
+     --pinnedpubkey <hashes> FILE/HASHES Public key to verify peer against
+     --post301       Do not switch to GET after following a 301
+     --post302       Do not switch to GET after following a 302
+     --post303       Do not switch to GET after following a 303
+     --preproxy [protocol://]host[:port] Use this proxy first
+ -#, --progress-bar  Display transfer progress as a bar
+     --proto <protocols> Enable/disable PROTOCOLS
+     --proto-default <protocol> Use PROTOCOL for any URL missing a scheme
+     --proto-redir <protocols> Enable/disable PROTOCOLS on redirect
+ -x, --proxy [protocol://]host[:port] Use this proxy
+     --proxy-anyauth Pick any proxy authentication method
+     --proxy-basic   Use Basic authentication on the proxy
+     --proxy-cacert <file> CA certificate to verify peer against for proxy
+     --proxy-capath <dir> CA directory to verify peer against for proxy
+     --proxy-cert <cert[:passwd]> Set client certificate for proxy
+     --proxy-cert-type <type> Client certificate type for HTTPS proxy
+     --proxy-ciphers <list> SSL ciphers to use for proxy
+     --proxy-crlfile <file> Set a CRL list for proxy
+     --proxy-digest  Use Digest authentication on the proxy
+     --proxy-header <header/@file> Pass custom header(s) to proxy
+     --proxy-insecure Do HTTPS proxy connections without verifying the proxy
+     --proxy-key <key> Private key for HTTPS proxy
+     --proxy-key-type <type> Private key file type for proxy
+     --proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
+     --proxy-ntlm    Use NTLM authentication on the proxy
+     --proxy-pass <phrase> Pass phrase for the private key for HTTPS proxy
+     --proxy-pinnedpubkey <hashes> FILE/HASHES public key to verify proxy with
+     --proxy-service-name <name> SPNEGO proxy service name
+     --proxy-ssl-allow-beast Allow security flaw for interop for HTTPS proxy
+     --proxy-tls13-ciphers <list> TLS 1.3 ciphersuites for proxy (OpenSSL)
+     --proxy-tlsauthtype <type> TLS authentication type for HTTPS proxy
+     --proxy-tlspassword <string> TLS password for HTTPS proxy
+     --proxy-tlsuser <name> TLS username for HTTPS proxy
+     --proxy-tlsv1   Use TLSv1 for HTTPS proxy
+ -U, --proxy-user <user:password> Proxy user and password
+     --proxy1.0 <host[:port]> Use HTTP/1.0 proxy on given port
+ -p, --proxytunnel   Operate through an HTTP proxy tunnel (using CONNECT)
+     --random-file <file> File for reading random data from
+ -r, --range <range> Retrieve only the bytes within RANGE
+     --raw           Do HTTP "raw"; no transfer decoding
+ -e, --referer <URL> Referrer URL
+ -J, --remote-header-name Use the header-provided filename
+ -O, --remote-name   Write output to a file named as the remote file
+     --remote-name-all Use the remote file name for all URLs
+ -R, --remote-time   Set the remote file's time on the local output
+ -X, --request <command> Specify request command to use
+     --request-target Specify the target for this request
+     --resolve <host:port:address[,address]...> Resolve the host+port to this address
+     --retry <num>   Retry request if transient problems occur
+     --retry-connrefused Retry on connection refused (use with --retry)
+     --retry-delay <seconds> Wait time between retries
+     --retry-max-time <seconds> Retry only within this period
+     --service-name <name> SPNEGO service name
+ -S, --show-error    Show error even when -s is used
+ -s, --silent        Silent mode
+     --socks4 <host[:port]> SOCKS4 proxy on given host + port
+     --socks4a <host[:port]> SOCKS4a proxy on given host + port
+     --socks5 <host[:port]> SOCKS5 proxy on given host + port
+     --socks5-basic  Enable username/password auth for SOCKS5 proxies
+     --socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
+     --socks5-gssapi-nec Compatibility with NEC SOCKS5 server
+     --socks5-gssapi-service <name> SOCKS5 proxy service name for GSS-API
+     --socks5-hostname <host[:port]> SOCKS5 proxy, pass host name to proxy
+ -Y, --speed-limit <speed> Stop transfers slower than this
+ -y, --speed-time <seconds> Trigger 'speed-limit' abort after this time
+     --ssl           Try SSL/TLS
+     --ssl-allow-beast Allow security flaw to improve interop
+     --ssl-no-revoke Disable cert revocation checks (Schannel)
+     --ssl-revoke-best-effort Ignore revocation offline or missing revocation list errors (Schannel)
+     --ssl-reqd      Require SSL/TLS
+ -2, --sslv2         Use SSLv2
+ -3, --sslv3         Use SSLv3
+     --stderr        Where to redirect stderr
+     --styled-output Enable styled output for HTTP headers
+     --suppress-connect-headers Suppress proxy CONNECT response headers
+     --tcp-fastopen  Use TCP Fast Open
+     --tcp-nodelay   Use the TCP_NODELAY option
+ -z, --time-cond <time> Transfer based on a time condition
+     --tls-max <VERSION> Set maximum allowed TLS version
+     --tls13-ciphers <list> TLS 1.3 ciphersuites (OpenSSL)
+     --tlsauthtype <type> TLS authentication type
+     --tlspassword   TLS password
+     --tlsuser <name> TLS user name
+ -1, --tlsv1         Use TLSv1.0 or greater
+     --tlsv1.0       Use TLSv1.0 or greater
+     --tlsv1.1       Use TLSv1.1 or greater
+     --tlsv1.2       Use TLSv1.2 or greater
+     --tlsv1.3       Use TLSv1.3 or greater
+     --tr-encoding   Request compressed transfer encoding
+     --trace <file>  Write a debug trace to FILE
+     --trace-ascii <file> Like --trace, but without hex output
+     --trace-time    Add time stamps to trace/verbose output
+     --unix-socket <path> Connect through this Unix domain socket
+ -T, --upload-file <file> Transfer local FILE to destination
+     --url <url>     URL to work with
+ -u, --user <user:password> Server user and password
+ -A, --user-agent <name> Send User-Agent <name> to server
+ -v, --verbose       Make the operation more talkative
+ -V, --version       Show version number and quit
+ -w, --write-out <format> Use output FORMAT after completion
+     --xattr         Store metadata in extended file attributes
+EOF
+            fi
+       exit 0
+       ;;
+
+        ftps-https)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Verbose help TBD
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+These options affect ftps but not https:
+ -B, --use-ascii     Use ASCII/text transfer
+     --ftp-account <data> Account data string
+     --ftp-alternative-to-user <command> String to replace USER [name]
+     --ftp-create-dirs Create the remote dirs if not present
+     --ftp-method <method> Control CWD usage
+     --ftp-pasv      Use PASV/EPSV instead of PORT
+     --ftp-pret      Send PRET before PASV
+     --ftp-skip-pasv-ip Skip the IP address for PASV
+     --ftp-ssl-ccc-mode <active/passive> Set CCC mode
+     --ftp-ssl-ccc   Send CCC after authenticating
+     --ftp-ssl-control Require SSL/TLS for FTP login, clear for transfer
+ -l, --list-only     List only mode
+ -P, --ftp-port <address> Use PORT instead of PASV
+ -Q, --quote         Send command(s) to server before transfer
+EOF
+            fi
+       exit 0
+       ;;
+
+
+
+        output)
+            if [[ -n "$VERBOSE" ]]; then
+                cat <<EOF
+Usage: curl [options...] <url>
+These options are used to modify the local output of the transfer:
+
+--create-dirs
+      When used in conjunction with the -o, --output option, curl will
+      create the necessary local directory hierarchy as  needed.  This
+      option  creates the dirs mentioned with the -o, --output option,
+      nothing else. If the --output file name uses no dir  or  if  the
+      dirs it mentions already exist, no dir will be created.
+
+      To  create remote directories when using FTP or SFTP, try --ftp-
+      create-dirs.
+
+-i, --include
+      Include  the  HTTP  response headers in the output. The HTTP re‐
+      sponse headers can include things  like  server  name,  cookies,
+      date of the document, HTTP version and more...
+
+      To view the request headers, consider the -v, --verbose option.
+
+      See also -v, --verbose.
+
+-N, --no-buffer
+      Disables the buffering of the output stream. In normal work sit‐
+      uations,  curl  will  use a standard buffered output stream that
+      will have the effect that it will output the data in chunks, not
+      necessarily  exactly  when  the data arrives.  Using this option
+      will disable that buffering.
+
+      Note that this is the negated option name  documented.  You  can
+      thus use --buffer to enforce the buffering.
+
+-o, --output <file>
+      Write output to <file> instead of stdout. If you are using {} or
+      []  to  fetch  multiple documents, you can use '#' followed by a
+      number in the <file> specifier. That variable will  be  replaced
+      with the current string for the URL being fetched. Like in:
+
+       curl http://{one,two}.example.com -o "file_#1.txt"
+
+      or use several variables like:
+
+       curl http://{site,host}.host[1-5].com -o "#1_#2"
+
+      You  may use this option as many times as the number of URLs you
+      have. For example, if you specify two URLs on the  same  command
+      line, you can use it like this:
+
+        curl -o aa example.com -o bb example.net
+
+      and  the  order  of  the -o options and the URLs doesn't matter,
+      just that the first -o is for the first URL and so  on,  so  the
+      above command line can also be written as
+
+        curl example.com example.net -o aa -o bb
+
+      See  also  the --create-dirs option to create the local directo‐
+      ries dynamically. Specifying the output as '-' (a  single  dash)
+      will force the output to be done to stdout.
+
+      See  also  -O, --remote-name and --remote-name-all and -J, --re‐
+      mote-header-name.
+
+-J, --remote-header-name
+      (HTTP) This option tells the -O, --remote-name option to use the
+      server-specified  Content-Disposition  filename  instead  of ex‐
+      tracting a filename from the URL.
+
+      If the server specifies a file name and a file  with  that  name
+      already  exists  in the current working directory it will not be
+      overwritten and an error will occur. If the server doesn't spec‐
+      ify a file name then this option has no effect.
+
+      There's  no  attempt to decode %-sequences (yet) in the provided
+      file name, so this option may provide you with rather unexpected
+      file names.
+
+      WARNING:  Exercise  judicious  use of this option, especially on
+      Windows. A rogue server could send you the  name  of  a  DLL  or
+      other  file  that could possibly be loaded automatically by Win‐
+      dows or some third party software.
+
+--remote-name-all
+      This option changes the default action for all given URLs to  be
+      dealt with as if -O, --remote-name were used for each one. So if
+      you want to disable that for a specific URL after --remote-name-
+      all has been used, you must use "-o -" or --no-remote-name.
+
+      Added in 7.19.0.
+
+-O, --remote-name
+      Write  output to a local file named like the remote file we get.
+      (Only the file part of the remote file is used, the path is  cut
+      off.)
+
+      The  file will be saved in the current working directory. If you
+      want the file saved in a  different  directory,  make  sure  you
+      change  the  current working directory before invoking curl with
+      this option.
+
+      The remote file name to use for saving  is  extracted  from  the
+      given  URL,  nothing  else,  and if it already exists it will be
+      overwritten. If you want the server to be  able  to  choose  the
+      file name refer to -J, --remote-header-name which can be used in
+      addition to this option. If the server chooses a file  name  and
+      that name already exists it will not be overwritten.
+
+      There is no URL decoding done on the file name. If it has %20 or
+      other URL encoded parts of the name, they will end up  as-is  as
+      file name.
+
+      You  may use this option as many times as the number of URLs you
+      have.
+
+-R, --remote-time
+      When used, this will make curl attempt to figure out  the  time‐
+      stamp  of the remote file, and if that is available make the lo‐
+      cal file get that same timestamp.
+
+--stderr
+      Redirect all writes to stderr to the specified file instead.  If
+      the file name is a plain '-', it is instead written to stdout.
+
+      If this option is used several times, the last one will be used.
+
+      See also -v, --verbose and -s, --silent.
+
+--styled-output
+      Enables  the automatic use of bold font styles when writing HTTP
+      headers to the terminal. Use --no-styled-output to  switch  them
+      off.
+
+      Added in 7.61.0.
+
+--suppress-connect-headers
+      When  -p,  --proxytunnel  is  used and a CONNECT request is made
+      don't output proxy CONNECT  response  headers.  This  option  is
+      meant  to  be used with -D, --dump-header or -i, --include which
+      are used to show protocol headers in the output. It has  no  ef‐
+      fect  on  debug options such as -v, --verbose or --trace, or any
+      statistics.
+
+      See also -D, --dump-header and -i, --include and -p, --proxytun‐
+      nel.
+
+-B, --use-ascii
+      (FTP LDAP) Enable ASCII transfer. For FTP, this can also be  en‐
+      forced  by  using  a  URL  that ends with ";type=A". This option
+      causes data sent to stdout to be in text mode for win32 systems.
+
+-v, --verbose
+      Makes curl verbose during the operation.  Useful  for  debugging
+      and  seeing  what's  going  on "under the hood". A line starting
+      with '>' means "header data" sent by  curl,  '<'  means  "header
+      data"  received  by  curl  that is hidden in normal cases, and a
+      line starting with '*' means additional info provided by curl.
+
+      If you only want HTTP headers in the output, -i, --include might
+      be the option you're looking for.
+
+      If  you think this option still doesn't give you enough details,
+      consider using --trace or --trace-ascii instead.
+
+      Use -s, --silent to make curl really quiet.
+
+      See also  -i,  --include.  This  option  overrides  --trace  and
+      --trace-ascii.
+
+-V, --version
+      Displays information about curl and the libcurl version it uses.
+
+      The  first  line  includes the full version of curl, libcurl and
+      other 3rd party libraries linked with the executable.
+
+      The second line (starts with "Protocols:") shows  all  protocols
+      that libcurl reports to support.
+
+      The third line (starts with "Features:") shows specific features
+      libcurl reports to offer. Available features include:
+
+      IPv6   You can use IPv6 with this.
+
+      krb4   Krb4 for FTP is supported.
+
+      SSL    SSL versions of various protocols are supported, such  as
+             HTTPS, FTPS, POP3S and so on.
+
+      libz   Automatic  decompression of compressed files over HTTP is
+             supported.
+
+      NTLM   NTLM authentication is supported.
+
+      Debug  This curl uses a libcurl built with Debug.  This  enables
+             more  error-tracking  and memory debugging etc. For curl-
+             developers only!
+
+      AsynchDNS
+             This curl uses asynchronous name  resolves.  Asynchronous
+             name  resolves can be done using either the c-ares or the
+             threaded resolver backends.
+
+      SPNEGO SPNEGO authentication is supported.
+
+      Largefile
+             This curl supports transfers of large files, files larger
+             than 2GB.
+
+      IDN    This curl supports IDN - international domain names.
+
+      GSS-API
+             GSS-API is supported.
+
+      SSPI   SSPI is supported.
+
+      TLS-SRP
+             SRP  (Secure Remote Password) authentication is supported
+             for TLS.
+
+      HTTP2  HTTP/2 support has been built-in.
+
+      UnixSockets
+             Unix sockets support is provided.
+
+      HTTPS-proxy
+             This curl is built to support HTTPS proxy.
+
+      Metalink
+             This curl supports Metalink (both version 3  and  4  (RFC
+             5854)),  which  describes  mirrors and hashes.  curl will
+             use mirrors for failover if there are errors (such as the
+             file or server not being available).
+
+      PSL    PSL  is  short for Public Suffix List and means that this
+             curl has been built with  knowledge  about  "public  suf‐
+             fixes".
+
+      MultiSSL
+             This curl supports multiple TLS backends.
+
+-w, --write-out <format>
+      Make curl display information on stdout after a completed trans‐
+      fer. The format is a string that may contain  plain  text  mixed
+      with  any  number of variables. The format can be specified as a
+      literal "string", or you can have curl read the  format  from  a
+      file  with  "@filename" and to tell curl to read the format from
+      stdin you write "@-".
+
+      The variables present in the output format will  be  substituted
+      by  the  value or text that curl thinks fit, as described below.
+      All variables are specified as %{variable_name} and to output  a
+      normal  % you just write them as %%. You can output a newline by
+      using \n, a carriage return with \r and a tab space with \t.
+
+      The output will be written to standard output, but this  can  be
+      switched to standard error by using %{stderr}.
+
+      NOTE: The %-symbol is a special symbol in the win32-environment,
+      where all occurrences of % must be doubled when using  this  op‐
+      tion.
+
+      The variables available are:
+
+      content_type   The  Content-Type  of  the requested document, if
+                     there was any.
+
+      filename_effective
+                     The ultimate filename that curl  writes  out  to.
+                     This  is only meaningful if curl is told to write
+                     to a file  with  the  -O,  --remote-name  or  -o,
+                     --output  option. It's most useful in combination
+                     with the -J, --remote-header-name option.  (Added
+                     in 7.26.0)
+
+      ftp_entry_path The initial path curl ended up in when logging on
+                     to the remote FTP server. (Added in 7.15.4)
+
+      http_code      The numerical response code that was found in the
+                     last  retrieved  HTTP(S)  or  FTP(s) transfer. In
+                     7.18.2 the alias response_code was added to  show
+                     the same info.
+
+      http_connect   The numerical code that was found in the last re‐
+                     sponse (from a proxy) to a curl CONNECT  request.
+                     (Added in 7.12.4)
+
+      http_version   The  http  version  that  was  effectively  used.
+                     (Added in 7.50.0)
+
+      local_ip       The IP address of the local end of the  most  re‐
+                     cently  done  connection  - can be either IPv4 or
+                     IPv6 (Added in 7.29.0)
+
+      local_port     The local port number of the most  recently  done
+                     connection (Added in 7.29.0)
+
+      num_connects   Number  of new connects made in the recent trans‐
+                     fer. (Added in 7.12.3)
+
+      num_redirects  Number of redirects that were followed in the re‐
+                     quest. (Added in 7.12.3)
+
+      proxy_ssl_verify_result
+                     The result of the HTTPS proxy's SSL peer certifi‐
+                     cate verification that was requested. 0 means the
+                     verification was successful. (Added in 7.52.0)
+
+      redirect_url   When an HTTP request was made without -L, --loca‐
+                     tion to follow redirects (or when --max-redir  is
+                     met),  this  variable  will show the actual URL a
+                     redirect would have gone to. (Added in 7.18.2)
+
+      remote_ip      The remote IP address of the most  recently  done
+                     connection - can be either IPv4 or IPv6 (Added in
+                     7.29.0)
+
+      remote_port    The remote port number of the most recently  done
+                     connection (Added in 7.29.0)
+
+      scheme         The  URL  scheme (sometimes called protocol) that
+                     was effectively used (Added in 7.52.0)
+
+      size_download  The total amount of bytes that were downloaded.
+
+      size_header    The total amount of bytes of the downloaded head‐
+                     ers.
+
+      size_request   The  total  amount of bytes that were sent in the
+                     HTTP request.
+
+      size_upload    The total amount of bytes that were uploaded.
+
+      speed_download The average download speed that curl measured for
+                     the complete download. Bytes per second.
+
+      speed_upload   The  average  upload speed that curl measured for
+                     the complete upload. Bytes per second.
+
+      ssl_verify_result
+                     The result of the SSL peer certificate  verifica‐
+                     tion that was requested. 0 means the verification
+                     was successful. (Added in 7.19.0)
+
+      stderr         From this point on, the  -w,  --write-out  output
+                     will  be  written  to  standard  error. (Added in
+                     7.63.0)
+
+      stdout         From this point on, the  -w,  --write-out  output
+                     will  be written to standard output.  This is the
+                     default, but can be used  to  switch  back  after
+                     switching to stderr.  (Added in 7.63.0)
+
+      time_appconnect
+                     The  time, in seconds, it took from the start un‐
+                     til the SSL/SSH/etc connect/handshake to the  re‐
+                     mote host was completed. (Added in 7.19.0)
+
+      time_connect   The  time, in seconds, it took from the start un‐
+                     til the TCP connect to the remote host (or proxy)
+                     was completed.
+
+      time_namelookup
+                     The  time, in seconds, it took from the start un‐
+                     til the name resolving was completed.
+
+      time_pretransfer
+                     The time, in seconds, it took from the start  un‐
+                     til  the  file  transfer was just about to begin.
+                     This includes all pre-transfer commands and nego‐
+                     tiations that are specific to the particular pro‐
+                     tocol(s) involved.
+
+      time_redirect  The time, in seconds, it took for all redirection
+                     steps including name lookup, connect, pretransfer
+                     and transfer before  the  final  transaction  was
+                     started.  time_redirect shows the complete execu‐
+                     tion time for multiple  redirections.  (Added  in
+                     7.12.3)
+
+      time_starttransfer
+                     The  time, in seconds, it took from the start un‐
+                     til the first byte was just about  to  be  trans‐
+                     ferred.  This  includes time_pretransfer and also
+                     the time the server needed to calculate  the  re‐
+                     sult.
+
+      time_total     The  total time, in seconds, that the full opera‐
+                     tion lasted.
+
+      url_effective  The URL that was fetched last. This is most mean‐
+                     ingful  if  you've  told curl to follow location:
+                     headers.
+
+      If this option is used several times, the last one will be used.
+
+--xattr
+      When saving output to a file, this option tells  curl  to  store
+      certain  file  metadata  in extended file attributes. Currently,
+      the URL is stored in the xdg.origin.url attribute and, for HTTP,
+      the  content  type  is stored in the mime_type attribute. If the
+      file system does not support extended attributes, a  warning  is
+      issued.
+EOF
+            else
+                cat <<EOF
+Usage: curl [options...] <url>
+These options are used to modify the local output of the transfer:
+     --create-dirs   Create necessary local directory hierarchy
+ -i, --include       Include protocol response headers in the output
+ -N, --no-buffer     Disable buffering of the output stream
+ -o, --output <file> Write to file instead of stdout
+ -J, --remote-header-name Use the header-provided filename
+ -O, --remote-name   Write output to a file named as the remote file
+     --remote-name-all Use the remote file name for all URLs
+ -R, --remote-time   Set the remote file's time on the local output
+     --stderr        Where to redirect stderr
+     --styled-output Enable styled output for HTTP headers
+     --suppress-connect-headers Suppress proxy CONNECT response headers
+ -B, --use-ascii     Use ASCII/text transfer
+ -v, --verbose       Make the operation more talkative
+ -V, --version       Show version number and quit
+ -w, --write-out <format> Use output FORMAT after completion
+     --xattr         Store metadata in extended file attributes
+EOF
+            fi
+       exit 0
+       ;;
+
+
+
+        *)
+            cat <<EOF
+No help for --help-$HELP_TYPE. See --help for a help list.
+THIS IS A DEMONSTRATION PROGRAM. The only help options implemented are:
+--help
+--help-basic
+--help-all
+--help-debug
+--help-ftps
+--help-https
+--help-clientauth
+--help-output
+--help-serverauth
+
+as well as the set intersection ones (use both of these at the same time):
+--help-clientauth --help-ftps
+--help-ftps --no-help-https  # i.e. ftp options that aren't also https options
+
+and this demo search queries:
+--help-search epsv
+--help-search sni
+
+as well as the verbose versions:
+--help -v
+--help-all -v
+--help-debug -v
+--help-output -v
+-v --help-search sni
+
+
+Note that some of the help options might not be entirely accurate; this is
+just intended as a quick demo.
+
+This was inspired by the talk "--help me if you can" given at curl://up 2020
+https://github.com/curl/curl-up/wiki/2020#recorded-talks
+EOF
+            exit 1
+       ;;
+    esac
+fi
+exec curl "$@"