blob: 8bddb9a8c6a96db4779fe0b21f478e5ff2e28bf6 [file] [log] [blame]
/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
***************************************************************************/
/*
* Source file for all OpenSSL-specific code for the TLS/SSL layer. No code
* but vtls.c should ever call or use these functions.
*/
/*
* The original SSLeay-using code for curl was written by Linas Vepstas and
* Sampo Kellomaki 1998.
*/
#include "curl_setup.h"
#ifdef USE_OPENSSL
#include <limits.h>
#include "urldata.h"
#include "sendf.h"
#include "formdata.h" /* for the boundary function */
#include "url.h" /* for the ssl config check function */
#include "inet_pton.h"
#include "openssl.h"
#include "connect.h"
#include "slist.h"
#include "select.h"
#include "vtls.h"
#include "strcase.h"
#include "hostcheck.h"
#include "curl_printf.h"
#include <openssl/ssl.h>
#include <openssl/rand.h>
#include <openssl/x509v3.h>
#ifndef OPENSSL_NO_DSA
#include <openssl/dsa.h>
#endif
#include <openssl/dh.h>
#include <openssl/err.h>
#include <openssl/md5.h>
#include <openssl/conf.h>
#include <openssl/bn.h>
#include <openssl/rsa.h>
#include <openssl/bio.h>
#include <openssl/buffer.h>
#include <openssl/pkcs12.h>
#if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_OCSP)
#include <openssl/ocsp.h>
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x0090700fL) && /* 0.9.7 or later */ \
!defined(OPENSSL_NO_ENGINE)
#define USE_OPENSSL_ENGINE
#include <openssl/engine.h>
#endif
#include "warnless.h"
#include "non-ascii.h" /* for Curl_convert_from_utf8 prototype */
/* The last #include files should be: */
#include "curl_memory.h"
#include "memdebug.h"
/* Uncomment the ALLOW_RENEG line to a real #define if you want to allow TLS
renegotiations when built with BoringSSL. Renegotiating is non-compliant
with HTTP/2 and "an extremely dangerous protocol feature". Beware.
#define ALLOW_RENEG 1
*/
#ifndef OPENSSL_VERSION_NUMBER
#error "OPENSSL_VERSION_NUMBER not defined"
#endif
#ifdef USE_OPENSSL_ENGINE
#include <openssl/ui.h>
#endif
#if OPENSSL_VERSION_NUMBER >= 0x00909000L
#define SSL_METHOD_QUAL const
#else
#define SSL_METHOD_QUAL
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x10000000L)
#define HAVE_ERR_REMOVE_THREAD_STATE 1
#endif
#if !defined(HAVE_SSLV2_CLIENT_METHOD) || \
OPENSSL_VERSION_NUMBER >= 0x10100000L /* 1.1.0+ has no SSLv2 */
#undef OPENSSL_NO_SSL2 /* undef first to avoid compiler warnings */
#define OPENSSL_NO_SSL2
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && /* OpenSSL 1.1.0+ */ \
!(defined(LIBRESSL_VERSION_NUMBER) && \
LIBRESSL_VERSION_NUMBER < 0x20700000L)
#define SSLEAY_VERSION_NUMBER OPENSSL_VERSION_NUMBER
#define HAVE_X509_GET0_EXTENSIONS 1 /* added in 1.1.0 -pre1 */
#define HAVE_OPAQUE_EVP_PKEY 1 /* since 1.1.0 -pre3 */
#define HAVE_OPAQUE_RSA_DSA_DH 1 /* since 1.1.0 -pre5 */
#define CONST_EXTS const
#define HAVE_ERR_REMOVE_THREAD_STATE_DEPRECATED 1
/* funny typecast define due to difference in API */
#ifdef LIBRESSL_VERSION_NUMBER
#define ARG2_X509_signature_print (X509_ALGOR *)
#else
#define ARG2_X509_signature_print
#endif
#else
/* For OpenSSL before 1.1.0 */
#define ASN1_STRING_get0_data(x) ASN1_STRING_data(x)
#define X509_get0_notBefore(x) X509_get_notBefore(x)
#define X509_get0_notAfter(x) X509_get_notAfter(x)
#define CONST_EXTS /* nope */
#ifndef LIBRESSL_VERSION_NUMBER
#define OpenSSL_version_num() SSLeay()
#endif
#endif
#ifdef LIBRESSL_VERSION_NUMBER
#define OpenSSL_version_num() LIBRESSL_VERSION_NUMBER
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x1000200fL) && /* 1.0.2 or later */ \
!(defined(LIBRESSL_VERSION_NUMBER) && \
LIBRESSL_VERSION_NUMBER < 0x20700000L)
#define HAVE_X509_GET0_SIGNATURE 1
#endif
#if OPENSSL_VERSION_NUMBER >= 0x10002003L && \
OPENSSL_VERSION_NUMBER <= 0x10002FFFL && \
!defined(OPENSSL_NO_COMP)
#define HAVE_SSL_COMP_FREE_COMPRESSION_METHODS 1
#endif
#if (OPENSSL_VERSION_NUMBER < 0x0090808fL)
/* not present in older OpenSSL */
#define OPENSSL_load_builtin_modules(x)
#endif
/*
* Whether SSL_CTX_set_keylog_callback is available.
* OpenSSL: supported since 1.1.1 https://github.com/openssl/openssl/pull/2287
* BoringSSL: supported since d28f59c27bac (committed 2015-11-19)
* LibreSSL: unsupported in at least 2.7.2 (explicitly check for it since it
* lies and pretends to be OpenSSL 2.0.0).
*/
#if (OPENSSL_VERSION_NUMBER >= 0x10101000L && \
!defined(LIBRESSL_VERSION_NUMBER)) || \
defined(OPENSSL_IS_BORINGSSL)
#define HAVE_KEYLOG_CALLBACK
#endif
/* Whether SSL_CTX_set_ciphersuites is available.
* OpenSSL: supported since 1.1.1 (commit a53b5be6a05)
* BoringSSL: no
* LibreSSL: no
*/
#if ((OPENSSL_VERSION_NUMBER >= 0x10101000L) && \
!defined(LIBRESSL_VERSION_NUMBER) && \
!defined(OPENSSL_IS_BORINGSSL))
#define HAVE_SSL_CTX_SET_CIPHERSUITES
#define HAVE_SSL_CTX_SET_POST_HANDSHAKE_AUTH
#endif
#if defined(LIBRESSL_VERSION_NUMBER)
#define OSSL_PACKAGE "LibreSSL"
#elif defined(OPENSSL_IS_BORINGSSL)
#define OSSL_PACKAGE "BoringSSL"
#else
#define OSSL_PACKAGE "OpenSSL"
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x10100000L)
/* up2date versions of OpenSSL maintain the default reasonably secure without
* breaking compatibility, so it is better not to override the default by curl
*/
#define DEFAULT_CIPHER_SELECTION NULL
#else
/* ... but it is not the case with old versions of OpenSSL */
#define DEFAULT_CIPHER_SELECTION \
"ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH"
#endif
#define ENABLE_SSLKEYLOGFILE
#ifdef ENABLE_SSLKEYLOGFILE
typedef struct ssl_tap_state {
int master_key_length;
unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH];
unsigned char client_random[SSL3_RANDOM_SIZE];
} ssl_tap_state_t;
#endif /* ENABLE_SSLKEYLOGFILE */
struct ssl_backend_data {
/* these ones requires specific SSL-types */
SSL_CTX* ctx;
SSL* handle;
X509* server_cert;
#ifdef ENABLE_SSLKEYLOGFILE
/* tap_state holds the last seen master key if we're logging them */
ssl_tap_state_t tap_state;
#endif
};
#define BACKEND connssl->backend
/*
* Number of bytes to read from the random number seed file. This must be
* a finite value (because some entropy "files" like /dev/urandom have
* an infinite length), but must be large enough to provide enough
* entropy to properly seed OpenSSL's PRNG.
*/
#define RAND_LOAD_LENGTH 1024
#ifdef ENABLE_SSLKEYLOGFILE
/* The fp for the open SSLKEYLOGFILE, or NULL if not open */
static FILE *keylog_file_fp;
#ifdef HAVE_KEYLOG_CALLBACK
static void ossl_keylog_callback(const SSL *ssl, const char *line)
{
(void)ssl;
/* Using fputs here instead of fprintf since libcurl's fprintf replacement
may not be thread-safe. */
if(keylog_file_fp && line && *line) {
char stackbuf[256];
char *buf;
size_t linelen = strlen(line);
if(linelen <= sizeof(stackbuf) - 2)
buf = stackbuf;
else {
buf = malloc(linelen + 2);
if(!buf)
return;
}
memcpy(buf, line, linelen);
buf[linelen] = '\n';
buf[linelen + 1] = '\0';
fputs(buf, keylog_file_fp);
if(buf != stackbuf)
free(buf);
}
}
#else
#define KEYLOG_PREFIX "CLIENT_RANDOM "
#define KEYLOG_PREFIX_LEN (sizeof(KEYLOG_PREFIX) - 1)
/*
* tap_ssl_key is called by libcurl to make the CLIENT_RANDOMs if the OpenSSL
* being used doesn't have native support for doing that.
*/
static void tap_ssl_key(const SSL *ssl, ssl_tap_state_t *state)
{
const char *hex = "0123456789ABCDEF";
int pos, i;
char line[KEYLOG_PREFIX_LEN + 2 * SSL3_RANDOM_SIZE + 1 +
2 * SSL_MAX_MASTER_KEY_LENGTH + 1 + 1];
const SSL_SESSION *session = SSL_get_session(ssl);
unsigned char client_random[SSL3_RANDOM_SIZE];
unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH];
int master_key_length = 0;
if(!session || !keylog_file_fp)
return;
#if OPENSSL_VERSION_NUMBER >= 0x10100000L && \
!(defined(LIBRESSL_VERSION_NUMBER) && \
LIBRESSL_VERSION_NUMBER < 0x20700000L)
/* ssl->s3 is not checked in openssl 1.1.0-pre6, but let's assume that
* we have a valid SSL context if we have a non-NULL session. */
SSL_get_client_random(ssl, client_random, SSL3_RANDOM_SIZE);
master_key_length = (int)
SSL_SESSION_get_master_key(session, master_key, SSL_MAX_MASTER_KEY_LENGTH);
#else
if(ssl->s3 && session->master_key_length > 0) {
master_key_length = session->master_key_length;
memcpy(master_key, session->master_key, session->master_key_length);
memcpy(client_random, ssl->s3->client_random, SSL3_RANDOM_SIZE);
}
#endif
if(master_key_length <= 0)
return;
/* Skip writing keys if there is no key or it did not change. */
if(state->master_key_length == master_key_length &&
!memcmp(state->master_key, master_key, master_key_length) &&
!memcmp(state->client_random, client_random, SSL3_RANDOM_SIZE)) {
return;
}
state->master_key_length = master_key_length;
memcpy(state->master_key, master_key, master_key_length);
memcpy(state->client_random, client_random, SSL3_RANDOM_SIZE);
memcpy(line, KEYLOG_PREFIX, KEYLOG_PREFIX_LEN);
pos = KEYLOG_PREFIX_LEN;
/* Client Random for SSLv3/TLS */
for(i = 0; i < SSL3_RANDOM_SIZE; i++) {
line[pos++] = hex[client_random[i] >> 4];
line[pos++] = hex[client_random[i] & 0xF];
}
line[pos++] = ' ';
/* Master Secret (size is at most SSL_MAX_MASTER_KEY_LENGTH) */
for(i = 0; i < master_key_length; i++) {
line[pos++] = hex[master_key[i] >> 4];
line[pos++] = hex[master_key[i] & 0xF];
}
line[pos++] = '\n';
line[pos] = '\0';
/* Using fputs here instead of fprintf since libcurl's fprintf replacement
may not be thread-safe. */
fputs(line, keylog_file_fp);
}
#endif /* !HAVE_KEYLOG_CALLBACK */
#endif /* ENABLE_SSLKEYLOGFILE */
static const char *SSL_ERROR_to_str(int err)
{
switch(err) {
case SSL_ERROR_NONE:
return "SSL_ERROR_NONE";
case SSL_ERROR_SSL:
return "SSL_ERROR_SSL";
case SSL_ERROR_WANT_READ:
return "SSL_ERROR_WANT_READ";
case SSL_ERROR_WANT_WRITE:
return "SSL_ERROR_WANT_WRITE";
case SSL_ERROR_WANT_X509_LOOKUP:
return "SSL_ERROR_WANT_X509_LOOKUP";
case SSL_ERROR_SYSCALL:
return "SSL_ERROR_SYSCALL";
case SSL_ERROR_ZERO_RETURN:
return "SSL_ERROR_ZERO_RETURN";
case SSL_ERROR_WANT_CONNECT:
return "SSL_ERROR_WANT_CONNECT";
case SSL_ERROR_WANT_ACCEPT:
return "SSL_ERROR_WANT_ACCEPT";
#if defined(SSL_ERROR_WANT_ASYNC)
case SSL_ERROR_WANT_ASYNC:
return "SSL_ERROR_WANT_ASYNC";
#endif
#if defined(SSL_ERROR_WANT_ASYNC_JOB)
case SSL_ERROR_WANT_ASYNC_JOB:
return "SSL_ERROR_WANT_ASYNC_JOB";
#endif
#if defined(SSL_ERROR_WANT_EARLY)
case SSL_ERROR_WANT_EARLY:
return "SSL_ERROR_WANT_EARLY";
#endif
default:
return "SSL_ERROR unknown";
}
}
/* Return error string for last OpenSSL error
*/
static char *ossl_strerror(unsigned long error, char *buf, size_t size)
{
ERR_error_string_n(error, buf, size);
return buf;
}
/* Return an extra data index for the connection data.
* This index can be used with SSL_get_ex_data() and SSL_set_ex_data().
*/
static int ossl_get_ssl_conn_index(void)
{
static int ssl_ex_data_conn_index = -1;
if(ssl_ex_data_conn_index < 0) {
ssl_ex_data_conn_index = SSL_get_ex_new_index(0, NULL, NULL, NULL, NULL);
}
return ssl_ex_data_conn_index;
}
/* Return an extra data index for the sockindex.
* This index can be used with SSL_get_ex_data() and SSL_set_ex_data().
*/
static int ossl_get_ssl_sockindex_index(void)
{
static int ssl_ex_data_sockindex_index = -1;
if(ssl_ex_data_sockindex_index < 0) {
ssl_ex_data_sockindex_index = SSL_get_ex_new_index(0, NULL, NULL, NULL,
NULL);
}
return ssl_ex_data_sockindex_index;
}
static int passwd_callback(char *buf, int num, int encrypting,
void *global_passwd)
{
DEBUGASSERT(0 == encrypting);
if(!encrypting) {
int klen = curlx_uztosi(strlen((char *)global_passwd));
if(num > klen) {
memcpy(buf, global_passwd, klen + 1);
return klen;
}
}
return 0;
}
/*
* rand_enough() returns TRUE if we have seeded the random engine properly.
*/
static bool rand_enough(void)
{
return (0 != RAND_status()) ? TRUE : FALSE;
}
static CURLcode Curl_ossl_seed(struct Curl_easy *data)
{
/* we have the "SSL is seeded" boolean static to prevent multiple
time-consuming seedings in vain */
static bool ssl_seeded = FALSE;
char fname[256];
if(ssl_seeded)
return CURLE_OK;
if(rand_enough()) {
/* OpenSSL 1.1.0+ will return here */
ssl_seeded = TRUE;
return CURLE_OK;
}
#ifndef RANDOM_FILE
/* if RANDOM_FILE isn't defined, we only perform this if an option tells
us to! */
if(data->set.str[STRING_SSL_RANDOM_FILE])
#define RANDOM_FILE "" /* doesn't matter won't be used */
#endif
{
/* let the option override the define */
RAND_load_file((data->set.str[STRING_SSL_RANDOM_FILE]?
data->set.str[STRING_SSL_RANDOM_FILE]:
RANDOM_FILE),
RAND_LOAD_LENGTH);
if(rand_enough())
return CURLE_OK;
}
#if defined(HAVE_RAND_EGD)
/* only available in OpenSSL 0.9.5 and later */
/* EGD_SOCKET is set at configure time or not at all */
#ifndef EGD_SOCKET
/* If we don't have the define set, we only do this if the egd-option
is set */
if(data->set.str[STRING_SSL_EGDSOCKET])
#define EGD_SOCKET "" /* doesn't matter won't be used */
#endif
{
/* If there's an option and a define, the option overrides the
define */
int ret = RAND_egd(data->set.str[STRING_SSL_EGDSOCKET]?
data->set.str[STRING_SSL_EGDSOCKET]:EGD_SOCKET);
if(-1 != ret) {
if(rand_enough())
return CURLE_OK;
}
}
#endif
/* fallback to a custom seeding of the PRNG using a hash based on a current
time */
do {
unsigned char randb[64];
size_t len = sizeof(randb);
size_t i, i_max;
for(i = 0, i_max = len / sizeof(struct curltime); i < i_max; ++i) {
struct curltime tv = Curl_now();
Curl_wait_ms(1);
tv.tv_sec *= i + 1;
tv.tv_usec *= (unsigned int)i + 2;
tv.tv_sec ^= ((Curl_now().tv_sec + Curl_now().tv_usec) *
(i + 3)) << 8;
tv.tv_usec ^= (unsigned int) ((Curl_now().tv_sec +
Curl_now().tv_usec) *
(i + 4)) << 16;
memcpy(&randb[i * sizeof(struct curltime)], &tv,
sizeof(struct curltime));
}
RAND_add(randb, (int)len, (double)len/2);
} while(!rand_enough());
/* generates a default path for the random seed file */
fname[0] = 0; /* blank it first */
RAND_file_name(fname, sizeof(fname));
if(fname[0]) {
/* we got a file name to try */
RAND_load_file(fname, RAND_LOAD_LENGTH);
if(rand_enough())
return CURLE_OK;
}
infof(data, "libcurl is now using a weak random seed!\n");
return (rand_enough() ? CURLE_OK :
CURLE_SSL_CONNECT_ERROR /* confusing error code */);
}
#ifndef SSL_FILETYPE_ENGINE
#define SSL_FILETYPE_ENGINE 42
#endif
#ifndef SSL_FILETYPE_PKCS12
#define SSL_FILETYPE_PKCS12 43
#endif
static int do_file_type(const char *type)
{
if(!type || !type[0])
return SSL_FILETYPE_PEM;
if(strcasecompare(type, "PEM"))
return SSL_FILETYPE_PEM;
if(strcasecompare(type, "DER"))
return SSL_FILETYPE_ASN1;
if(strcasecompare(type, "ENG"))
return SSL_FILETYPE_ENGINE;
if(strcasecompare(type, "P12"))
return SSL_FILETYPE_PKCS12;
return -1;
}
#ifdef USE_OPENSSL_ENGINE
/*
* Supply default password to the engine user interface conversation.
* The password is passed by OpenSSL engine from ENGINE_load_private_key()
* last argument to the ui and can be obtained by UI_get0_user_data(ui) here.
*/
static int ssl_ui_reader(UI *ui, UI_STRING *uis)
{
const char *password;
switch(UI_get_string_type(uis)) {
case UIT_PROMPT:
case UIT_VERIFY:
password = (const char *)UI_get0_user_data(ui);
if(password && (UI_get_input_flags(uis) & UI_INPUT_FLAG_DEFAULT_PWD)) {
UI_set_result(ui, uis, password);
return 1;
}
default:
break;
}
return (UI_method_get_reader(UI_OpenSSL()))(ui, uis);
}
/*
* Suppress interactive request for a default password if available.
*/
static int ssl_ui_writer(UI *ui, UI_STRING *uis)
{
switch(UI_get_string_type(uis)) {
case UIT_PROMPT:
case UIT_VERIFY:
if(UI_get0_user_data(ui) &&
(UI_get_input_flags(uis) & UI_INPUT_FLAG_DEFAULT_PWD)) {
return 1;
}
default:
break;
}
return (UI_method_get_writer(UI_OpenSSL()))(ui, uis);
}
/*
* Check if a given string is a PKCS#11 URI
*/
static bool is_pkcs11_uri(const char *string)
{
return (string && strncasecompare(string, "pkcs11:", 7));
}
#endif
static CURLcode Curl_ossl_set_engine(struct Curl_easy *data,
const char *engine);
static
int cert_stuff(struct connectdata *conn,
SSL_CTX* ctx,
char *cert_file,
const char *cert_type,
char *key_file,
const char *key_type,
char *key_passwd)
{
struct Curl_easy *data = conn->data;
char error_buffer[256];
bool check_privkey = TRUE;
int file_type = do_file_type(cert_type);
if(cert_file || (file_type == SSL_FILETYPE_ENGINE)) {
SSL *ssl;
X509 *x509;
int cert_done = 0;
if(key_passwd) {
/* set the password in the callback userdata */
SSL_CTX_set_default_passwd_cb_userdata(ctx, key_passwd);
/* Set passwd callback: */
SSL_CTX_set_default_passwd_cb(ctx, passwd_callback);
}
switch(file_type) {
case SSL_FILETYPE_PEM:
/* SSL_CTX_use_certificate_chain_file() only works on PEM files */
if(SSL_CTX_use_certificate_chain_file(ctx,
cert_file) != 1) {
failf(data,
"could not load PEM client certificate, " OSSL_PACKAGE
" error %s, "
"(no key found, wrong pass phrase, or wrong file format?)",
ossl_strerror(ERR_get_error(), error_buffer,
sizeof(error_buffer)) );
return 0;
}
break;
case SSL_FILETYPE_ASN1:
/* SSL_CTX_use_certificate_file() works with either PEM or ASN1, but
we use the case above for PEM so this can only be performed with
ASN1 files. */
if(SSL_CTX_use_certificate_file(ctx,
cert_file,
file_type) != 1) {
failf(data,
"could not load ASN1 client certificate, " OSSL_PACKAGE
" error %s, "
"(no key found, wrong pass phrase, or wrong file format?)",
ossl_strerror(ERR_get_error(), error_buffer,
sizeof(error_buffer)) );
return 0;
}
break;
case SSL_FILETYPE_ENGINE:
#if defined(USE_OPENSSL_ENGINE) && defined(ENGINE_CTRL_GET_CMD_FROM_NAME)
{
/* Implicitly use pkcs11 engine if none was provided and the
* cert_file is a PKCS#11 URI */
if(!data->state.engine) {
if(is_pkcs11_uri(cert_file)) {
if(Curl_ossl_set_engine(data, "pkcs11") != CURLE_OK) {
return 0;
}
}
}
if(data->state.engine) {
const char *cmd_name = "LOAD_CERT_CTRL";
struct {
const char *cert_id;
X509 *cert;
} params;
params.cert_id = cert_file;
params.cert = NULL;
/* Does the engine supports LOAD_CERT_CTRL ? */
if(!ENGINE_ctrl(data->state.engine, ENGINE_CTRL_GET_CMD_FROM_NAME,
0, (void *)cmd_name, NULL)) {
failf(data, "ssl engine does not support loading certificates");
return 0;
}
/* Load the certificate from the engine */
if(!ENGINE_ctrl_cmd(data->state.engine, cmd_name,
0, &params, NULL, 1)) {
failf(data, "ssl engine cannot load client cert with id"
" '%s' [%s]", cert_file,
ossl_strerror(ERR_get_error(), error_buffer,
sizeof(error_buffer)));
return 0;
}
if(!params.cert) {
failf(data, "ssl engine didn't initialized the certificate "
"properly.");
return 0;
}
if(SSL_CTX_use_certificate(ctx, params.cert) != 1) {
failf(data, "unable to set client certificate");
X509_free(params.cert);
return 0;
}
X509_free(params.cert); /* we don't need the handle any more... */
}
else {
failf(data, "crypto engine not set, can't load certificate");
return 0;
}
}
break;
#else
failf(data, "file type ENG for certificate not implemented");
return 0;
#endif
case SSL_FILETYPE_PKCS12:
{
BIO *fp = NULL;
PKCS12 *p12 = NULL;
EVP_PKEY *pri;
STACK_OF(X509) *ca = NULL;
fp = BIO_new(BIO_s_file());
if(fp == NULL) {
failf(data,
"BIO_new return NULL, " OSSL_PACKAGE
" error %s",
ossl_strerror(ERR_get_error(), error_buffer,
sizeof(error_buffer)) );
return 0;
}
if(BIO_read_filename(fp, cert_file) <= 0) {
failf(data, "could not open PKCS12 file '%s'", cert_file);
BIO_free(fp);
return 0;
}
p12 = d2i_PKCS12_bio(fp, NULL);
BIO_free(fp);
if(!p12) {
failf(data, "error reading PKCS12 file '%s'", cert_file);
return 0;
}
PKCS12_PBE_add();
if(!PKCS12_parse(p12, key_passwd, &pri, &x509,
&ca)) {
failf(data,
"could not parse PKCS12 file, check password, " OSSL_PACKAGE
" error %s",
ossl_strerror(ERR_get_error(), error_buffer,
sizeof(error_buffer)) );
PKCS12_free(p12);
return 0;
}
PKCS12_free(p12);
if(SSL_CTX_use_certificate(ctx, x509) != 1) {
failf(data,
"could not load PKCS12 client certificate, " OSSL_PACKAGE
" error %s",
ossl_strerror(ERR_get_error(), error_buffer,
sizeof(error_buffer)) );
goto fail;
}
if(SSL_CTX_use_PrivateKey(ctx, pri) != 1) {
failf(data, "unable to use private key from PKCS12 file '%s'",
cert_file);
goto fail;
}
if(!SSL_CTX_check_private_key (ctx)) {
failf(data, "private key from PKCS12 file '%s' "
"does not match certificate in same file", cert_file);
goto fail;
}
/* Set Certificate Verification chain */
if(ca) {
while(sk_X509_num(ca)) {
/*
* Note that sk_X509_pop() is used below to make sure the cert is
* removed from the stack properly before getting passed to
* SSL_CTX_add_extra_chain_cert(), which takes ownership. Previously
* we used sk_X509_value() instead, but then we'd clean it in the
* subsequent sk_X509_pop_free() call.
*/
X509 *x = sk_X509_pop(ca);
if(!SSL_CTX_add_client_CA(ctx, x)) {
X509_free(x);
failf(data, "cannot add certificate to client CA list");
goto fail;
}
if(!SSL_CTX_add_extra_chain_cert(ctx, x)) {
X509_free(x);
failf(data, "cannot add certificate to certificate chain");
goto fail;
}
}
}
cert_done = 1;
fail:
EVP_PKEY_free(pri);
X509_free(x509);
sk_X509_pop_free(ca, X509_free);
if(!cert_done)
return 0; /* failure! */
break;
}
default:
failf(data, "not supported file type '%s' for certificate", cert_type);
return 0;
}
file_type = do_file_type(key_type);
switch(file_type) {
case SSL_FILETYPE_PEM:
if(cert_done)
break;
if(!key_file)
/* cert & key can only be in PEM case in the same file */
key_file = cert_file;
/* FALLTHROUGH */
case SSL_FILETYPE_ASN1:
if(SSL_CTX_use_PrivateKey_file(ctx, key_file, file_type) != 1) {
failf(data, "unable to set private key file: '%s' type %s",
key_file, key_type?key_type:"PEM");
return 0;
}
break;
case SSL_FILETYPE_ENGINE:
#ifdef USE_OPENSSL_ENGINE
{ /* XXXX still needs some work */
EVP_PKEY *priv_key = NULL;
/* Implicitly use pkcs11 engine if none was provided and the
* key_file is a PKCS#11 URI */
if(!data->state.engine) {
if(is_pkcs11_uri(key_file)) {
if(Curl_ossl_set_engine(data, "pkcs11") != CURLE_OK) {
return 0;
}
}
}
if(data->state.engine) {
UI_METHOD *ui_method =
UI_create_method((char *)"curl user interface");
if(!ui_method) {
failf(data, "unable do create " OSSL_PACKAGE
" user-interface method");
return 0;
}
UI_method_set_opener(ui_method, UI_method_get_opener(UI_OpenSSL()));
UI_method_set_closer(ui_method, UI_method_get_closer(UI_OpenSSL()));
UI_method_set_reader(ui_method, ssl_ui_reader);
UI_method_set_writer(ui_method, ssl_ui_writer);
/* the typecast below was added to please mingw32 */
priv_key = (EVP_PKEY *)
ENGINE_load_private_key(data->state.engine, key_file,
ui_method,
key_passwd);
UI_destroy_method(ui_method);
if(!priv_key) {
failf(data, "failed to load private key from crypto engine");
return 0;
}
if(SSL_CTX_use_PrivateKey(ctx, priv_key) != 1) {
failf(data, "unable to set private key");
EVP_PKEY_free(priv_key);
return 0;
}
EVP_PKEY_free(priv_key); /* we don't need the handle any more... */
}
else {
failf(data, "crypto engine not set, can't load private key");
return 0;
}
}
break;
#else
failf(data, "file type ENG for private key not supported");
return 0;
#endif
case SSL_FILETYPE_PKCS12:
if(!cert_done) {
failf(data, "file type P12 for private key not supported");
return 0;
}
break;
default:
failf(data, "not supported file type for private key");
return 0;
}
ssl = SSL_new(ctx);
if(!ssl) {
failf(data, "unable to create an SSL structure");
return 0;
}
x509 = SSL_get_certificate(ssl);
/* This version was provided by Evan Jordan and is supposed to not
leak memory as the previous version: */
if(x509) {
EVP_PKEY *pktmp = X509_get_pubkey(x509);
EVP_PKEY_copy_parameters(pktmp, SSL_get_privatekey(ssl));
EVP_PKEY_free(pktmp);
}
#if !defined(OPENSSL_NO_RSA) && !defined(OPENSSL_IS_BORINGSSL)
{
/* If RSA is used, don't check the private key if its flags indicate
* it doesn't support it. */
EVP_PKEY *priv_key = SSL_get_privatekey(ssl);
int pktype;
#ifdef HAVE_OPAQUE_EVP_PKEY
pktype = EVP_PKEY_id(priv_key);
#else
pktype = priv_key->type;
#endif
if(pktype == EVP_PKEY_RSA) {
RSA *rsa = EVP_PKEY_get1_RSA(priv_key);
if(RSA_flags(rsa) & RSA_METHOD_FLAG_NO_CHECK)
check_privkey = FALSE;
RSA_free(rsa); /* Decrement reference count */
}
}
#endif
SSL_free(ssl);
/* If we are using DSA, we can copy the parameters from
* the private key */
if(check_privkey == TRUE) {
/* Now we know that a key and cert have been set against
* the SSL context */
if(!SSL_CTX_check_private_key(ctx)) {
failf(data, "Private key does not match the certificate public key");
return 0;
}
}
}
return 1;
}
/* returns non-zero on failure */
static int x509_name_oneline(X509_NAME *a, char *buf, size_t size)
{
#if 0
return X509_NAME_oneline(a, buf, size);
#else
BIO *bio_out = BIO_new(BIO_s_mem());
BUF_MEM *biomem;
int rc;
if(!bio_out)
return 1; /* alloc failed! */
rc = X509_NAME_print_ex(bio_out, a, 0, XN_FLAG_SEP_SPLUS_SPC);
BIO_get_mem_ptr(bio_out, &biomem);
if((size_t)biomem->length < size)
size = biomem->length;
else
size--; /* don't overwrite the buffer end */
memcpy(buf, biomem->data, size);
buf[size] = 0;
BIO_free(bio_out);
return !rc;
#endif
}
/**
* Global SSL init
*
* @retval 0 error initializing SSL
* @retval 1 SSL initialized successfully
*/
static int Curl_ossl_init(void)
{
#ifdef ENABLE_SSLKEYLOGFILE
char *keylog_file_name;
#endif
OPENSSL_load_builtin_modules();
#ifdef USE_OPENSSL_ENGINE
ENGINE_load_builtin_engines();
#endif
/* OPENSSL_config(NULL); is "strongly recommended" to use but unfortunately
that function makes an exit() call on wrongly formatted config files
which makes it hard to use in some situations. OPENSSL_config() itself
calls CONF_modules_load_file() and we use that instead and we ignore
its return code! */
/* CONF_MFLAGS_DEFAULT_SECTION introduced some time between 0.9.8b and
0.9.8e */
#ifndef CONF_MFLAGS_DEFAULT_SECTION
#define CONF_MFLAGS_DEFAULT_SECTION 0x0
#endif
#ifndef CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG
CONF_modules_load_file(NULL, NULL,
CONF_MFLAGS_DEFAULT_SECTION|
CONF_MFLAGS_IGNORE_MISSING_FILE);
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && \
!defined(LIBRESSL_VERSION_NUMBER)
/* OpenSSL 1.1.0+ takes care of initialization itself */
#else
/* Lets get nice error messages */
SSL_load_error_strings();
/* Init the global ciphers and digests */
if(!SSLeay_add_ssl_algorithms())
return 0;
OpenSSL_add_all_algorithms();
#endif
#ifdef ENABLE_SSLKEYLOGFILE
if(!keylog_file_fp) {
keylog_file_name = curl_getenv("SSLKEYLOGFILE");
if(keylog_file_name) {
keylog_file_fp = fopen(keylog_file_name, FOPEN_APPENDTEXT);
if(keylog_file_fp) {
#ifdef WIN32
if(setvbuf(keylog_file_fp, NULL, _IONBF, 0))
#else
if(setvbuf(keylog_file_fp, NULL, _IOLBF, 4096))
#endif
{
fclose(keylog_file_fp);
keylog_file_fp = NULL;
}
}
Curl_safefree(keylog_file_name);
}
}
#endif
/* Initialize the extra data indexes */
if(ossl_get_ssl_conn_index() < 0 || ossl_get_ssl_sockindex_index() < 0)
return 0;
return 1;
}
/* Global cleanup */
static void Curl_ossl_cleanup(void)
{
#if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && \
!defined(LIBRESSL_VERSION_NUMBER)
/* OpenSSL 1.1 deprecates all these cleanup functions and
turns them into no-ops in OpenSSL 1.0 compatibility mode */
#else
/* Free ciphers and digests lists */
EVP_cleanup();
#ifdef USE_OPENSSL_ENGINE
/* Free engine list */
ENGINE_cleanup();
#endif
/* Free OpenSSL error strings */
ERR_free_strings();
/* Free thread local error state, destroying hash upon zero refcount */
#ifdef HAVE_ERR_REMOVE_THREAD_STATE
ERR_remove_thread_state(NULL);
#else
ERR_remove_state(0);
#endif
/* Free all memory allocated by all configuration modules */
CONF_modules_free();
#ifdef HAVE_SSL_COMP_FREE_COMPRESSION_METHODS
SSL_COMP_free_compression_methods();
#endif
#endif
#ifdef ENABLE_SSLKEYLOGFILE
if(keylog_file_fp) {
fclose(keylog_file_fp);
keylog_file_fp = NULL;
}
#endif
}
/*
* This function is used to determine connection status.
*
* Return codes:
* 1 means the connection is still in place
* 0 means the connection has been closed
* -1 means the connection status is unknown
*/
static int Curl_ossl_check_cxn(struct connectdata *conn)
{
/* SSL_peek takes data out of the raw recv buffer without peeking so we use
recv MSG_PEEK instead. Bug #795 */
#ifdef MSG_PEEK
char buf;
ssize_t nread;
nread = recv((RECV_TYPE_ARG1)conn->sock[FIRSTSOCKET], (RECV_TYPE_ARG2)&buf,
(RECV_TYPE_ARG3)1, (RECV_TYPE_ARG4)MSG_PEEK);
if(nread == 0)
return 0; /* connection has been closed */
if(nread == 1)
return 1; /* connection still in place */
else if(nread == -1) {
int err = SOCKERRNO;
if(err == EINPROGRESS ||
#if defined(EAGAIN) && (EAGAIN != EWOULDBLOCK)
err == EAGAIN ||
#endif
err == EWOULDBLOCK)
return 1; /* connection still in place */
if(err == ECONNRESET ||
#ifdef ECONNABORTED
err == ECONNABORTED ||
#endif
#ifdef ENETDOWN
err == ENETDOWN ||
#endif
#ifdef ENETRESET
err == ENETRESET ||
#endif
#ifdef ESHUTDOWN
err == ESHUTDOWN ||
#endif
#ifdef ETIMEDOUT
err == ETIMEDOUT ||
#endif
err == ENOTCONN)
return 0; /* connection has been closed */
}
#endif
return -1; /* connection status unknown */
}
/* Selects an OpenSSL crypto engine
*/
static CURLcode Curl_ossl_set_engine(struct Curl_easy *data,
const char *engine)
{
#ifdef USE_OPENSSL_ENGINE
ENGINE *e;
#if OPENSSL_VERSION_NUMBER >= 0x00909000L
e = ENGINE_by_id(engine);
#else
/* avoid memory leak */
for(e = ENGINE_get_first(); e; e = ENGINE_get_next(e)) {
const char *e_id = ENGINE_get_id(e);
if(!strcmp(engine, e_id))
break;
}
#endif
if(!e) {
failf(data, "SSL Engine '%s' not found", engine);
return CURLE_SSL_ENGINE_NOTFOUND;
}
if(data->state.engine) {
ENGINE_finish(data->state.engine);
ENGINE_free(data->state.engine);
data->state.engine = NULL;
}
if(!ENGINE_init(e)) {
char buf[256];
ENGINE_free(e);
failf(data, "Failed to initialise SSL Engine '%s':\n%s",
engine, ossl_strerror(ERR_get_error(), buf, sizeof(buf)));
return CURLE_SSL_ENGINE_INITFAILED;
}
data->state.engine = e;
return CURLE_OK;
#else
(void)engine;
failf(data, "SSL Engine not supported");
return CURLE_SSL_ENGINE_NOTFOUND;
#endif
}
/* Sets engine as default for all SSL operations
*/
static CURLcode Curl_ossl_set_engine_default(struct Curl_easy *data)
{
#ifdef USE_OPENSSL_ENGINE
if(data->state.engine) {
if(ENGINE_set_default(data->state.engine, ENGINE_METHOD_ALL) > 0) {
infof(data, "set default crypto engine '%s'\n",
ENGINE_get_id(data->state.engine));
}
else {
failf(data, "set default crypto engine '%s' failed",
ENGINE_get_id(data->state.engine));
return CURLE_SSL_ENGINE_SETFAILED;
}
}
#else
(void) data;
#endif
return CURLE_OK;
}
/* Return list of OpenSSL crypto engine names.
*/
static struct curl_slist *Curl_ossl_engines_list(struct Curl_easy *data)
{
struct curl_slist *list = NULL;
#ifdef USE_OPENSSL_ENGINE
struct curl_slist *beg;
ENGINE *e;
for(e = ENGINE_get_first(); e; e = ENGINE_get_next(e)) {
beg = curl_slist_append(list, ENGINE_get_id(e));
if(!beg) {
curl_slist_free_all(list);
return NULL;
}
list = beg;
}
#endif
(void) data;
return list;
}
static void ossl_close(struct ssl_connect_data *connssl)
{
if(BACKEND->handle) {
(void)SSL_shutdown(BACKEND->handle);
SSL_set_connect_state(BACKEND->handle);
SSL_free(BACKEND->handle);
BACKEND->handle = NULL;
}
if(BACKEND->ctx) {
SSL_CTX_free(BACKEND->ctx);
BACKEND->ctx = NULL;
}
}
/*
* This function is called when an SSL connection is closed.
*/
static void Curl_ossl_close(struct connectdata *conn, int sockindex)
{
ossl_close(&conn->ssl[sockindex]);
ossl_close(&conn->proxy_ssl[sockindex]);
}
/*
* This function is called to shut down the SSL layer but keep the
* socket open (CCC - Clear Command Channel)
*/
static int Curl_ossl_shutdown(struct connectdata *conn, int sockindex)
{
int retval = 0;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
struct Curl_easy *data = conn->data;
char buf[256]; /* We will use this for the OpenSSL error buffer, so it has
to be at least 256 bytes long. */
unsigned long sslerror;
ssize_t nread;
int buffsize;
int err;
bool done = FALSE;
/* This has only been tested on the proftpd server, and the mod_tls code
sends a close notify alert without waiting for a close notify alert in
response. Thus we wait for a close notify alert from the server, but
we do not send one. Let's hope other servers do the same... */
if(data->set.ftp_ccc == CURLFTPSSL_CCC_ACTIVE)
(void)SSL_shutdown(BACKEND->handle);
if(BACKEND->handle) {
buffsize = (int)sizeof(buf);
while(!done) {
int what = SOCKET_READABLE(conn->sock[sockindex],
SSL_SHUTDOWN_TIMEOUT);
if(what > 0) {
ERR_clear_error();
/* Something to read, let's do it and hope that it is the close
notify alert from the server */
nread = (ssize_t)SSL_read(BACKEND->handle, buf, buffsize);
err = SSL_get_error(BACKEND->handle, (int)nread);
switch(err) {
case SSL_ERROR_NONE: /* this is not an error */
case SSL_ERROR_ZERO_RETURN: /* no more data */
/* This is the expected response. There was no data but only
the close notify alert */
done = TRUE;
break;
case SSL_ERROR_WANT_READ:
/* there's data pending, re-invoke SSL_read() */
infof(data, "SSL_ERROR_WANT_READ\n");
break;
case SSL_ERROR_WANT_WRITE:
/* SSL wants a write. Really odd. Let's bail out. */
infof(data, "SSL_ERROR_WANT_WRITE\n");
done = TRUE;
break;
default:
/* openssl/ssl.h says "look at error stack/return value/errno" */
sslerror = ERR_get_error();
failf(conn->data, OSSL_PACKAGE " SSL_read on shutdown: %s, errno %d",
(sslerror ?
ossl_strerror(sslerror, buf, sizeof(buf)) :
SSL_ERROR_to_str(err)),
SOCKERRNO);
done = TRUE;
break;
}
}
else if(0 == what) {
/* timeout */
failf(data, "SSL shutdown timeout");
done = TRUE;
}
else {
/* anything that gets here is fatally bad */
failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO);
retval = -1;
done = TRUE;
}
} /* while()-loop for the select() */
if(data->set.verbose) {
#ifdef HAVE_SSL_GET_SHUTDOWN
switch(SSL_get_shutdown(BACKEND->handle)) {
case SSL_SENT_SHUTDOWN:
infof(data, "SSL_get_shutdown() returned SSL_SENT_SHUTDOWN\n");
break;
case SSL_RECEIVED_SHUTDOWN:
infof(data, "SSL_get_shutdown() returned SSL_RECEIVED_SHUTDOWN\n");
break;
case SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN:
infof(data, "SSL_get_shutdown() returned SSL_SENT_SHUTDOWN|"
"SSL_RECEIVED__SHUTDOWN\n");
break;
}
#endif
}
SSL_free(BACKEND->handle);
BACKEND->handle = NULL;
}
return retval;
}
static void Curl_ossl_session_free(void *ptr)
{
/* free the ID */
SSL_SESSION_free(ptr);
}
/*
* This function is called when the 'data' struct is going away. Close
* down everything and free all resources!
*/
static void Curl_ossl_close_all(struct Curl_easy *data)
{
#ifdef USE_OPENSSL_ENGINE
if(data->state.engine) {
ENGINE_finish(data->state.engine);
ENGINE_free(data->state.engine);
data->state.engine = NULL;
}
#else
(void)data;
#endif
#if !defined(HAVE_ERR_REMOVE_THREAD_STATE_DEPRECATED) && \
defined(HAVE_ERR_REMOVE_THREAD_STATE)
/* OpenSSL 1.0.1 and 1.0.2 build an error queue that is stored per-thread
so we need to clean it here in case the thread will be killed. All OpenSSL
code should extract the error in association with the error so clearing
this queue here should be harmless at worst. */
ERR_remove_thread_state(NULL);
#endif
}
/* ====================================================== */
/*
* Match subjectAltName against the host name. This requires a conversion
* in CURL_DOES_CONVERSIONS builds.
*/
static bool subj_alt_hostcheck(struct Curl_easy *data,
const char *match_pattern, const char *hostname,
const char *dispname)
#ifdef CURL_DOES_CONVERSIONS
{
bool res = FALSE;
/* Curl_cert_hostcheck uses host encoding, but we get ASCII from
OpenSSl.
*/
char *match_pattern2 = strdup(match_pattern);
if(match_pattern2) {
if(Curl_convert_from_network(data, match_pattern2,
strlen(match_pattern2)) == CURLE_OK) {
if(Curl_cert_hostcheck(match_pattern2, hostname)) {
res = TRUE;
infof(data,
" subjectAltName: host \"%s\" matched cert's \"%s\"\n",
dispname, match_pattern2);
}
}
free(match_pattern2);
}
else {
failf(data,
"SSL: out of memory when allocating temporary for subjectAltName");
}
return res;
}
#else
{
#ifdef CURL_DISABLE_VERBOSE_STRINGS
(void)dispname;
(void)data;
#endif
if(Curl_cert_hostcheck(match_pattern, hostname)) {
infof(data, " subjectAltName: host \"%s\" matched cert's \"%s\"\n",
dispname, match_pattern);
return TRUE;
}
return FALSE;
}
#endif
/* Quote from RFC2818 section 3.1 "Server Identity"
If a subjectAltName extension of type dNSName is present, that MUST
be used as the identity. Otherwise, the (most specific) Common Name
field in the Subject field of the certificate MUST be used. Although
the use of the Common Name is existing practice, it is deprecated and
Certification Authorities are encouraged to use the dNSName instead.
Matching is performed using the matching rules specified by
[RFC2459]. If more than one identity of a given type is present in
the certificate (e.g., more than one dNSName name, a match in any one
of the set is considered acceptable.) Names may contain the wildcard
character * which is considered to match any single domain name
component or component fragment. E.g., *.a.com matches foo.a.com but
not bar.foo.a.com. f*.com matches foo.com but not bar.com.
In some cases, the URI is specified as an IP address rather than a
hostname. In this case, the iPAddress subjectAltName must be present
in the certificate and must exactly match the IP in the URI.
*/
static CURLcode verifyhost(struct connectdata *conn, X509 *server_cert)
{
bool matched = FALSE;
int target = GEN_DNS; /* target type, GEN_DNS or GEN_IPADD */
size_t addrlen = 0;
struct Curl_easy *data = conn->data;
STACK_OF(GENERAL_NAME) *altnames;
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
CURLcode result = CURLE_OK;
bool dNSName = FALSE; /* if a dNSName field exists in the cert */
bool iPAddress = FALSE; /* if a iPAddress field exists in the cert */
const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name :
conn->host.name;
const char * const dispname = SSL_IS_PROXY() ?
conn->http_proxy.host.dispname : conn->host.dispname;
#ifdef ENABLE_IPV6
if(conn->bits.ipv6_ip &&
Curl_inet_pton(AF_INET6, hostname, &addr)) {
target = GEN_IPADD;
addrlen = sizeof(struct in6_addr);
}
else
#endif
if(Curl_inet_pton(AF_INET, hostname, &addr)) {
target = GEN_IPADD;
addrlen = sizeof(struct in_addr);
}
/* get a "list" of alternative names */
altnames = X509_get_ext_d2i(server_cert, NID_subject_alt_name, NULL, NULL);
if(altnames) {
int numalts;
int i;
bool dnsmatched = FALSE;
bool ipmatched = FALSE;
/* get amount of alternatives, RFC2459 claims there MUST be at least
one, but we don't depend on it... */
numalts = sk_GENERAL_NAME_num(altnames);
/* loop through all alternatives - until a dnsmatch */
for(i = 0; (i < numalts) && !dnsmatched; i++) {
/* get a handle to alternative name number i */
const GENERAL_NAME *check = sk_GENERAL_NAME_value(altnames, i);
if(check->type == GEN_DNS)
dNSName = TRUE;
else if(check->type == GEN_IPADD)
iPAddress = TRUE;
/* only check alternatives of the same type the target is */
if(check->type == target) {
/* get data and length */
const char *altptr = (char *)ASN1_STRING_get0_data(check->d.ia5);
size_t altlen = (size_t) ASN1_STRING_length(check->d.ia5);
switch(target) {
case GEN_DNS: /* name/pattern comparison */
/* The OpenSSL man page explicitly says: "In general it cannot be
assumed that the data returned by ASN1_STRING_data() is null
terminated or does not contain embedded nulls." But also that
"The actual format of the data will depend on the actual string
type itself: for example for and IA5String the data will be ASCII"
Gisle researched the OpenSSL sources:
"I checked the 0.9.6 and 0.9.8 sources before my patch and
it always 0-terminates an IA5String."
*/
if((altlen == strlen(altptr)) &&
/* if this isn't true, there was an embedded zero in the name
string and we cannot match it. */
subj_alt_hostcheck(data, altptr, hostname, dispname)) {
dnsmatched = TRUE;
}
break;
case GEN_IPADD: /* IP address comparison */
/* compare alternative IP address if the data chunk is the same size
our server IP address is */
if((altlen == addrlen) && !memcmp(altptr, &addr, altlen)) {
ipmatched = TRUE;
infof(data,
" subjectAltName: host \"%s\" matched cert's IP address!\n",
dispname);
}
break;
}
}
}
GENERAL_NAMES_free(altnames);
if(dnsmatched || ipmatched)
matched = TRUE;
}
if(matched)
/* an alternative name matched */
;
else if(dNSName || iPAddress) {
infof(data, " subjectAltName does not match %s\n", dispname);
failf(data, "SSL: no alternative certificate subject name matches "
"target host name '%s'", dispname);
result = CURLE_PEER_FAILED_VERIFICATION;
}
else {
/* we have to look to the last occurrence of a commonName in the
distinguished one to get the most significant one. */
int j, i = -1;
/* The following is done because of a bug in 0.9.6b */
unsigned char *nulstr = (unsigned char *)"";
unsigned char *peer_CN = nulstr;
X509_NAME *name = X509_get_subject_name(server_cert);
if(name)
while((j = X509_NAME_get_index_by_NID(name, NID_commonName, i)) >= 0)
i = j;
/* we have the name entry and we will now convert this to a string
that we can use for comparison. Doing this we support BMPstring,
UTF8 etc. */
if(i >= 0) {
ASN1_STRING *tmp =
X509_NAME_ENTRY_get_data(X509_NAME_get_entry(name, i));
/* In OpenSSL 0.9.7d and earlier, ASN1_STRING_to_UTF8 fails if the input
is already UTF-8 encoded. We check for this case and copy the raw
string manually to avoid the problem. This code can be made
conditional in the future when OpenSSL has been fixed. Work-around
brought by Alexis S. L. Carvalho. */
if(tmp) {
if(ASN1_STRING_type(tmp) == V_ASN1_UTF8STRING) {
j = ASN1_STRING_length(tmp);
if(j >= 0) {
peer_CN = OPENSSL_malloc(j + 1);
if(peer_CN) {
memcpy(peer_CN, ASN1_STRING_get0_data(tmp), j);
peer_CN[j] = '\0';
}
}
}
else /* not a UTF8 name */
j = ASN1_STRING_to_UTF8(&peer_CN, tmp);
if(peer_CN && (curlx_uztosi(strlen((char *)peer_CN)) != j)) {
/* there was a terminating zero before the end of string, this
cannot match and we return failure! */
failf(data, "SSL: illegal cert name field");
result = CURLE_PEER_FAILED_VERIFICATION;
}
}
}
if(peer_CN == nulstr)
peer_CN = NULL;
else {
/* convert peer_CN from UTF8 */
CURLcode rc = Curl_convert_from_utf8(data, (char *)peer_CN,
strlen((char *)peer_CN));
/* Curl_convert_from_utf8 calls failf if unsuccessful */
if(rc) {
OPENSSL_free(peer_CN);
return rc;
}
}
if(result)
/* error already detected, pass through */
;
else if(!peer_CN) {
failf(data,
"SSL: unable to obtain common name from peer certificate");
result = CURLE_PEER_FAILED_VERIFICATION;
}
else if(!Curl_cert_hostcheck((const char *)peer_CN, hostname)) {
failf(data, "SSL: certificate subject name '%s' does not match "
"target host name '%s'", peer_CN, dispname);
result = CURLE_PEER_FAILED_VERIFICATION;
}
else {
infof(data, " common name: %s (matched)\n", peer_CN);
}
if(peer_CN)
OPENSSL_free(peer_CN);
}
return result;
}
#if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_TLSEXT) && \
!defined(OPENSSL_NO_OCSP)
static CURLcode verifystatus(struct connectdata *conn,
struct ssl_connect_data *connssl)
{
int i, ocsp_status;
const unsigned char *p;
CURLcode result = CURLE_OK;
struct Curl_easy *data = conn->data;
OCSP_RESPONSE *rsp = NULL;
OCSP_BASICRESP *br = NULL;
X509_STORE *st = NULL;
STACK_OF(X509) *ch = NULL;
long len = SSL_get_tlsext_status_ocsp_resp(BACKEND->handle, &p);
if(!p) {
failf(data, "No OCSP response received");
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
rsp = d2i_OCSP_RESPONSE(NULL, &p, len);
if(!rsp) {
failf(data, "Invalid OCSP response");
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
ocsp_status = OCSP_response_status(rsp);
if(ocsp_status != OCSP_RESPONSE_STATUS_SUCCESSFUL) {
failf(data, "Invalid OCSP response status: %s (%d)",
OCSP_response_status_str(ocsp_status), ocsp_status);
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
br = OCSP_response_get1_basic(rsp);
if(!br) {
failf(data, "Invalid OCSP response");
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
ch = SSL_get_peer_cert_chain(BACKEND->handle);
st = SSL_CTX_get_cert_store(BACKEND->ctx);
#if ((OPENSSL_VERSION_NUMBER <= 0x1000201fL) /* Fixed after 1.0.2a */ || \
(defined(LIBRESSL_VERSION_NUMBER) && \
LIBRESSL_VERSION_NUMBER <= 0x2040200fL))
/* The authorized responder cert in the OCSP response MUST be signed by the
peer cert's issuer (see RFC6960 section 4.2.2.2). If that's a root cert,
no problem, but if it's an intermediate cert OpenSSL has a bug where it
expects this issuer to be present in the chain embedded in the OCSP
response. So we add it if necessary. */
/* First make sure the peer cert chain includes both a peer and an issuer,
and the OCSP response contains a responder cert. */
if(sk_X509_num(ch) >= 2 && sk_X509_num(br->certs) >= 1) {
X509 *responder = sk_X509_value(br->certs, sk_X509_num(br->certs) - 1);
/* Find issuer of responder cert and add it to the OCSP response chain */
for(i = 0; i < sk_X509_num(ch); i++) {
X509 *issuer = sk_X509_value(ch, i);
if(X509_check_issued(issuer, responder) == X509_V_OK) {
if(!OCSP_basic_add1_cert(br, issuer)) {
failf(data, "Could not add issuer cert to OCSP response");
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
}
}
}
#endif
if(OCSP_basic_verify(br, ch, st, 0) <= 0) {
failf(data, "OCSP response verification failed");
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
for(i = 0; i < OCSP_resp_count(br); i++) {
int cert_status, crl_reason;
OCSP_SINGLERESP *single = NULL;
ASN1_GENERALIZEDTIME *rev, *thisupd, *nextupd;
single = OCSP_resp_get0(br, i);
if(!single)
continue;
cert_status = OCSP_single_get0_status(single, &crl_reason, &rev,
&thisupd, &nextupd);
if(!OCSP_check_validity(thisupd, nextupd, 300L, -1L)) {
failf(data, "OCSP response has expired");
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
infof(data, "SSL certificate status: %s (%d)\n",
OCSP_cert_status_str(cert_status), cert_status);
switch(cert_status) {
case V_OCSP_CERTSTATUS_GOOD:
break;
case V_OCSP_CERTSTATUS_REVOKED:
result = CURLE_SSL_INVALIDCERTSTATUS;
failf(data, "SSL certificate revocation reason: %s (%d)",
OCSP_crl_reason_str(crl_reason), crl_reason);
goto end;
case V_OCSP_CERTSTATUS_UNKNOWN:
result = CURLE_SSL_INVALIDCERTSTATUS;
goto end;
}
}
end:
if(br) OCSP_BASICRESP_free(br);
OCSP_RESPONSE_free(rsp);
return result;
}
#endif
#endif /* USE_OPENSSL */
/* The SSL_CTRL_SET_MSG_CALLBACK doesn't exist in ancient OpenSSL versions
and thus this cannot be done there. */
#ifdef SSL_CTRL_SET_MSG_CALLBACK
static const char *ssl_msg_type(int ssl_ver, int msg)
{
#ifdef SSL2_VERSION_MAJOR
if(ssl_ver == SSL2_VERSION_MAJOR) {
switch(msg) {
case SSL2_MT_ERROR:
return "Error";
case SSL2_MT_CLIENT_HELLO:
return "Client hello";
case SSL2_MT_CLIENT_MASTER_KEY:
return "Client key";
case SSL2_MT_CLIENT_FINISHED:
return "Client finished";
case SSL2_MT_SERVER_HELLO:
return "Server hello";
case SSL2_MT_SERVER_VERIFY:
return "Server verify";
case SSL2_MT_SERVER_FINISHED:
return "Server finished";
case SSL2_MT_REQUEST_CERTIFICATE:
return "Request CERT";
case SSL2_MT_CLIENT_CERTIFICATE:
return "Client CERT";
}
}
else
#endif
if(ssl_ver == SSL3_VERSION_MAJOR) {
switch(msg) {
case SSL3_MT_HELLO_REQUEST:
return "Hello request";
case SSL3_MT_CLIENT_HELLO:
return "Client hello";
case SSL3_MT_SERVER_HELLO:
return "Server hello";
#ifdef SSL3_MT_NEWSESSION_TICKET
case SSL3_MT_NEWSESSION_TICKET:
return "Newsession Ticket";
#endif
case SSL3_MT_CERTIFICATE:
return "Certificate";
case SSL3_MT_SERVER_KEY_EXCHANGE:
return "Server key exchange";
case SSL3_MT_CLIENT_KEY_EXCHANGE:
return "Client key exchange";
case SSL3_MT_CERTIFICATE_REQUEST:
return "Request CERT";
case SSL3_MT_SERVER_DONE:
return "Server finished";
case SSL3_MT_CERTIFICATE_VERIFY:
return "CERT verify";
case SSL3_MT_FINISHED:
return "Finished";
#ifdef SSL3_MT_CERTIFICATE_STATUS
case SSL3_MT_CERTIFICATE_STATUS:
return "Certificate Status";
#endif
#ifdef SSL3_MT_ENCRYPTED_EXTENSIONS
case SSL3_MT_ENCRYPTED_EXTENSIONS:
return "Encrypted Extensions";
#endif
#ifdef SSL3_MT_END_OF_EARLY_DATA
case SSL3_MT_END_OF_EARLY_DATA:
return "End of early data";
#endif
#ifdef SSL3_MT_KEY_UPDATE
case SSL3_MT_KEY_UPDATE:
return "Key update";
#endif
#ifdef SSL3_MT_NEXT_PROTO
case SSL3_MT_NEXT_PROTO:
return "Next protocol";
#endif
#ifdef SSL3_MT_MESSAGE_HASH
case SSL3_MT_MESSAGE_HASH:
return "Message hash";
#endif
}
}
return "Unknown";
}
static const char *tls_rt_type(int type)
{
switch(type) {
#ifdef SSL3_RT_HEADER
case SSL3_RT_HEADER:
return "TLS header";
#endif
case SSL3_RT_CHANGE_CIPHER_SPEC:
return "TLS change cipher";
case SSL3_RT_ALERT:
return "TLS alert";
case SSL3_RT_HANDSHAKE:
return "TLS handshake";
case SSL3_RT_APPLICATION_DATA:
return "TLS app data";
default:
return "TLS Unknown";
}
}
/*
* Our callback from the SSL/TLS layers.
*/
static void ssl_tls_trace(int direction, int ssl_ver, int content_type,
const void *buf, size_t len, SSL *ssl,
void *userp)
{
struct Curl_easy *data;
char unknown[32];
const char *verstr = NULL;
struct connectdata *conn = userp;
if(!conn || !conn->data || !conn->data->set.fdebug ||
(direction != 0 && direction != 1))
return;
data = conn->data;
switch(ssl_ver) {
#ifdef SSL2_VERSION /* removed in recent versions */
case SSL2_VERSION:
verstr = "SSLv2";
break;
#endif
#ifdef SSL3_VERSION
case SSL3_VERSION:
verstr = "SSLv3";
break;
#endif
case TLS1_VERSION:
verstr = "TLSv1.0";
break;
#ifdef TLS1_1_VERSION
case TLS1_1_VERSION:
verstr = "TLSv1.1";
break;
#endif
#ifdef TLS1_2_VERSION
case TLS1_2_VERSION:
verstr = "TLSv1.2";
break;
#endif
#ifdef TLS1_3_VERSION
case TLS1_3_VERSION:
verstr = "TLSv1.3";
break;
#endif
case 0:
break;
default:
msnprintf(unknown, sizeof(unknown), "(%x)", ssl_ver);
verstr = unknown;
break;
}
/* Log progress for interesting records only (like Handshake or Alert), skip
* all raw record headers (content_type == SSL3_RT_HEADER or ssl_ver == 0).
* For TLS 1.3, skip notification of the decrypted inner Content Type.
*/
if(ssl_ver
#ifdef SSL3_RT_INNER_CONTENT_TYPE
&& content_type != SSL3_RT_INNER_CONTENT_TYPE
#endif
) {
const char *msg_name, *tls_rt_name;
char ssl_buf[1024];
int msg_type, txt_len;
/* the info given when the version is zero is not that useful for us */
ssl_ver >>= 8; /* check the upper 8 bits only below */
/* SSLv2 doesn't seem to have TLS record-type headers, so OpenSSL
* always pass-up content-type as 0. But the interesting message-type
* is at 'buf[0]'.
*/
if(ssl_ver == SSL3_VERSION_MAJOR && content_type)
tls_rt_name = tls_rt_type(content_type);
else
tls_rt_name = "";
if(content_type == SSL3_RT_CHANGE_CIPHER_SPEC) {
msg_type = *(char *)buf;
msg_name = "Change cipher spec";
}
else if(content_type == SSL3_RT_ALERT) {
msg_type = (((char *)buf)[0] << 8) + ((char *)buf)[1];
msg_name = SSL_alert_desc_string_long(msg_type);
}
else {
msg_type = *(char *)buf;
msg_name = ssl_msg_type(ssl_ver, msg_type);
}
txt_len = msnprintf(ssl_buf, sizeof(ssl_buf), "%s (%s), %s, %s (%d):\n",
verstr, direction?"OUT":"IN",
tls_rt_name, msg_name, msg_type);
if(0 <= txt_len && (unsigned)txt_len < sizeof(ssl_buf)) {
Curl_debug(data, CURLINFO_TEXT, ssl_buf, (size_t)txt_len);
}
}
Curl_debug(data, (direction == 1) ? CURLINFO_SSL_DATA_OUT :
CURLINFO_SSL_DATA_IN, (char *)buf, len);
(void) ssl;
}
#endif
#ifdef USE_OPENSSL
/* ====================================================== */
#ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME
# define use_sni(x) sni = (x)
#else
# define use_sni(x) Curl_nop_stmt
#endif
/* Check for OpenSSL 1.0.2 which has ALPN support. */
#undef HAS_ALPN
#if OPENSSL_VERSION_NUMBER >= 0x10002000L \
&& !defined(OPENSSL_NO_TLSEXT)
# define HAS_ALPN 1
#endif
/* Check for OpenSSL 1.0.1 which has NPN support. */
#undef HAS_NPN
#if OPENSSL_VERSION_NUMBER >= 0x10001000L \
&& !defined(OPENSSL_NO_TLSEXT) \
&& !defined(OPENSSL_NO_NEXTPROTONEG)
# define HAS_NPN 1
#endif
#ifdef HAS_NPN
/*
* in is a list of length prefixed strings. this function has to select
* the protocol we want to use from the list and write its string into out.
*/
static int
select_next_protocol(unsigned char **out, unsigned char *outlen,
const unsigned char *in, unsigned int inlen,
const char *key, unsigned int keylen)
{
unsigned int i;
for(i = 0; i + keylen <= inlen; i += in[i] + 1) {
if(memcmp(&in[i + 1], key, keylen) == 0) {
*out = (unsigned char *) &in[i + 1];
*outlen = in[i];
return 0;
}
}
return -1;
}
static int
select_next_proto_cb(SSL *ssl,
unsigned char **out, unsigned char *outlen,
const unsigned char *in, unsigned int inlen,
void *arg)
{
struct connectdata *conn = (struct connectdata*) arg;
(void)ssl;
#ifdef USE_NGHTTP2
if(conn->data->set.httpversion >= CURL_HTTP_VERSION_2 &&
!select_next_protocol(out, outlen, in, inlen, NGHTTP2_PROTO_VERSION_ID,
NGHTTP2_PROTO_VERSION_ID_LEN)) {
infof(conn->data, "NPN, negotiated HTTP2 (%s)\n",
NGHTTP2_PROTO_VERSION_ID);
conn->negnpn = CURL_HTTP_VERSION_2;
return SSL_TLSEXT_ERR_OK;
}
#endif
if(!select_next_protocol(out, outlen, in, inlen, ALPN_HTTP_1_1,
ALPN_HTTP_1_1_LENGTH)) {
infof(conn->data, "NPN, negotiated HTTP1.1\n");
conn->negnpn = CURL_HTTP_VERSION_1_1;
return SSL_TLSEXT_ERR_OK;
}
infof(conn->data, "NPN, no overlap, use HTTP1.1\n");
*out = (unsigned char *)ALPN_HTTP_1_1;
*outlen = ALPN_HTTP_1_1_LENGTH;
conn->negnpn = CURL_HTTP_VERSION_1_1;
return SSL_TLSEXT_ERR_OK;
}
#endif /* HAS_NPN */
#ifndef CURL_DISABLE_VERBOSE_STRINGS
static const char *
get_ssl_version_txt(SSL *ssl)
{
if(!ssl)
return "";
switch(SSL_version(ssl)) {
#ifdef TLS1_3_VERSION
case TLS1_3_VERSION:
return "TLSv1.3";
#endif
#if OPENSSL_VERSION_NUMBER >= 0x1000100FL
case TLS1_2_VERSION:
return "TLSv1.2";
case TLS1_1_VERSION:
return "TLSv1.1";
#endif
case TLS1_VERSION:
return "TLSv1.0";
case SSL3_VERSION:
return "SSLv3";
case SSL2_VERSION:
return "SSLv2";
}
return "unknown";
}
#endif
static CURLcode
set_ssl_version_min_max(long *ctx_options, struct connectdata *conn,
int sockindex)
{
#if (OPENSSL_VERSION_NUMBER < 0x1000100FL) || !defined(TLS1_3_VERSION)
/* convoluted #if condition just to avoid compiler warnings on unused
variable */
struct Curl_easy *data = conn->data;
#endif
long ssl_version = SSL_CONN_CONFIG(version);
long ssl_version_max = SSL_CONN_CONFIG(version_max);
switch(ssl_version) {
case CURL_SSLVERSION_TLSv1_3:
#ifdef TLS1_3_VERSION
{
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
SSL_CTX_set_max_proto_version(BACKEND->ctx, TLS1_3_VERSION);
*ctx_options |= SSL_OP_NO_TLSv1_2;
}
#else
(void)sockindex;
(void)ctx_options;
failf(data, OSSL_PACKAGE " was built without TLS 1.3 support");
return CURLE_NOT_BUILT_IN;
#endif
/* FALLTHROUGH */
case CURL_SSLVERSION_TLSv1_2:
#if OPENSSL_VERSION_NUMBER >= 0x1000100FL
*ctx_options |= SSL_OP_NO_TLSv1_1;
#else
failf(data, OSSL_PACKAGE " was built without TLS 1.2 support");
return CURLE_NOT_BUILT_IN;
#endif
/* FALLTHROUGH */
case CURL_SSLVERSION_TLSv1_1:
#if OPENSSL_VERSION_NUMBER >= 0x1000100FL
*ctx_options |= SSL_OP_NO_TLSv1;
#else
failf(data, OSSL_PACKAGE " was built without TLS 1.1 support");
return CURLE_NOT_BUILT_IN;
#endif
/* FALLTHROUGH */
case CURL_SSLVERSION_TLSv1_0:
case CURL_SSLVERSION_TLSv1:
break;
}
switch(ssl_version_max) {
case CURL_SSLVERSION_MAX_TLSv1_0:
#if OPENSSL_VERSION_NUMBER >= 0x1000100FL
*ctx_options |= SSL_OP_NO_TLSv1_1;
#endif
/* FALLTHROUGH */
case CURL_SSLVERSION_MAX_TLSv1_1:
#if OPENSSL_VERSION_NUMBER >= 0x1000100FL
*ctx_options |= SSL_OP_NO_TLSv1_2;
#endif
/* FALLTHROUGH */
case CURL_SSLVERSION_MAX_TLSv1_2:
#ifdef TLS1_3_VERSION
*ctx_options |= SSL_OP_NO_TLSv1_3;
#endif
break;
case CURL_SSLVERSION_MAX_TLSv1_3:
#ifdef TLS1_3_VERSION
break;
#else
failf(data, OSSL_PACKAGE " was built without TLS 1.3 support");
return CURLE_NOT_BUILT_IN;
#endif
}
return CURLE_OK;
}
/* The "new session" callback must return zero if the session can be removed
* or non-zero if the session has been put into the session cache.
*/
static int ossl_new_session_cb(SSL *ssl, SSL_SESSION *ssl_sessionid)
{
int res = 0;
struct connectdata *conn;
struct Curl_easy *data;
int sockindex;
curl_socket_t *sockindex_ptr;
int connectdata_idx = ossl_get_ssl_conn_index();
int sockindex_idx = ossl_get_ssl_sockindex_index();
if(connectdata_idx < 0 || sockindex_idx < 0)
return 0;
conn = (struct connectdata*) SSL_get_ex_data(ssl, connectdata_idx);
if(!conn)
return 0;
data = conn->data;
/* The sockindex has been stored as a pointer to an array element */
sockindex_ptr = (curl_socket_t*) SSL_get_ex_data(ssl, sockindex_idx);
sockindex = (int)(sockindex_ptr - conn->sock);
if(SSL_SET_OPTION(primary.sessionid)) {
bool incache;
void *old_ssl_sessionid = NULL;
Curl_ssl_sessionid_lock(conn);
incache = !(Curl_ssl_getsessionid(conn, &old_ssl_sessionid, NULL,
sockindex));
if(incache) {
if(old_ssl_sessionid != ssl_sessionid) {
infof(data, "old SSL session ID is stale, removing\n");
Curl_ssl_delsessionid(conn, old_ssl_sessionid);
incache = FALSE;
}
}
if(!incache) {
if(!Curl_ssl_addsessionid(conn, ssl_sessionid,
0 /* unknown size */, sockindex)) {
/* the session has been put into the session cache */
res = 1;
}
else
failf(data, "failed to store ssl session");
}
Curl_ssl_sessionid_unlock(conn);
}
return res;
}
static CURLcode ossl_connect_step1(struct connectdata *conn, int sockindex)
{
CURLcode result = CURLE_OK;
char *ciphers;
struct Curl_easy *data = conn->data;
SSL_METHOD_QUAL SSL_METHOD *req_method = NULL;
X509_LOOKUP *lookup = NULL;
curl_socket_t sockfd = conn->sock[sockindex];
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
long ctx_options = 0;
#ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME
bool sni;
const char * const hostname = SSL_IS_PROXY() ? conn->http_proxy.host.name :
conn->host.name;
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
#endif
long * const certverifyresult = SSL_IS_PROXY() ?
&data->set.proxy_ssl.certverifyresult : &data->set.ssl.certverifyresult;
const long int ssl_version = SSL_CONN_CONFIG(version);
#ifdef USE_TLS_SRP
const enum CURL_TLSAUTH ssl_authtype = SSL_SET_OPTION(authtype);
#endif
char * const ssl_cert = SSL_SET_OPTION(cert);
const char * const ssl_cert_type = SSL_SET_OPTION(cert_type);
const char * const ssl_cafile = SSL_CONN_CONFIG(CAfile);
const char * const ssl_capath = SSL_CONN_CONFIG(CApath);
const bool verifypeer = SSL_CONN_CONFIG(verifypeer);
const char * const ssl_crlfile = SSL_SET_OPTION(CRLfile);
char error_buffer[256];
DEBUGASSERT(ssl_connect_1 == connssl->connecting_state);
/* Make funny stuff to get random input */
result = Curl_ossl_seed(data);
if(result)
return result;
*certverifyresult = !X509_V_OK;
/* check to see if we've been told to use an explicit SSL/TLS version */
switch(ssl_version) {
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
case CURL_SSLVERSION_TLSv1_0:
case CURL_SSLVERSION_TLSv1_1:
case CURL_SSLVERSION_TLSv1_2:
case CURL_SSLVERSION_TLSv1_3:
/* it will be handled later with the context options */
#if (OPENSSL_VERSION_NUMBER >= 0x10100000L)
req_method = TLS_client_method();
#else
req_method = SSLv23_client_method();
#endif
use_sni(TRUE);
break;
case CURL_SSLVERSION_SSLv2:
#ifdef OPENSSL_NO_SSL2
failf(data, OSSL_PACKAGE " was built without SSLv2 support");
return CURLE_NOT_BUILT_IN;
#else
#ifdef USE_TLS_SRP
if(ssl_authtype == CURL_TLSAUTH_SRP)
return CURLE_SSL_CONNECT_ERROR;
#endif
req_method = SSLv2_client_method();
use_sni(FALSE);
break;
#endif
case CURL_SSLVERSION_SSLv3:
#ifdef OPENSSL_NO_SSL3_METHOD
failf(data, OSSL_PACKAGE " was built without SSLv3 support");
return CURLE_NOT_BUILT_IN;
#else
#ifdef USE_TLS_SRP
if(ssl_authtype == CURL_TLSAUTH_SRP)
return CURLE_SSL_CONNECT_ERROR;
#endif
req_method = SSLv3_client_method();
use_sni(FALSE);
break;
#endif
default:
failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION");
return CURLE_SSL_CONNECT_ERROR;
}
if(BACKEND->ctx)
SSL_CTX_free(BACKEND->ctx);
BACKEND->ctx = SSL_CTX_new(req_method);
if(!BACKEND->ctx) {
failf(data, "SSL: couldn't create a context: %s",
ossl_strerror(ERR_peek_error(), error_buffer, sizeof(error_buffer)));
return CURLE_OUT_OF_MEMORY;
}
#ifdef SSL_MODE_RELEASE_BUFFERS
SSL_CTX_set_mode(BACKEND->ctx, SSL_MODE_RELEASE_BUFFERS);
#endif
#ifdef SSL_CTRL_SET_MSG_CALLBACK
if(data->set.fdebug && data->set.verbose) {
/* the SSL trace callback is only used for verbose logging */
SSL_CTX_set_msg_callback(BACKEND->ctx, ssl_tls_trace);
SSL_CTX_set_msg_callback_arg(BACKEND->ctx, conn);
}
#endif
/* OpenSSL contains code to work-around lots of bugs and flaws in various
SSL-implementations. SSL_CTX_set_options() is used to enabled those
work-arounds. The man page for this option states that SSL_OP_ALL enables
all the work-arounds and that "It is usually safe to use SSL_OP_ALL to
enable the bug workaround options if compatibility with somewhat broken
implementations is desired."
The "-no_ticket" option was introduced in Openssl0.9.8j. It's a flag to
disable "rfc4507bis session ticket support". rfc4507bis was later turned
into the proper RFC5077 it seems: https://tools.ietf.org/html/rfc5077
The enabled extension concerns the session management. I wonder how often
libcurl stops a connection and then resumes a TLS session. also, sending
the session data is some overhead. .I suggest that you just use your
proposed patch (which explicitly disables TICKET).
If someone writes an application with libcurl and openssl who wants to
enable the feature, one can do this in the SSL callback.
SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG option enabling allowed proper
interoperability with web server Netscape Enterprise Server 2.0.1 which
was released back in 1996.
Due to CVE-2010-4180, option SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG has
become ineffective as of OpenSSL 0.9.8q and 1.0.0c. In order to mitigate
CVE-2010-4180 when using previous OpenSSL versions we no longer enable
this option regardless of OpenSSL version and SSL_OP_ALL definition.
OpenSSL added a work-around for a SSL 3.0/TLS 1.0 CBC vulnerability
(https://www.openssl.org/~bodo/tls-cbc.txt). In 0.9.6e they added a bit to
SSL_OP_ALL that _disables_ that work-around despite the fact that
SSL_OP_ALL is documented to do "rather harmless" workarounds. In order to
keep the secure work-around, the SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS bit
must not be set.
*/
ctx_options = SSL_OP_ALL;
#ifdef SSL_OP_NO_TICKET
ctx_options |= SSL_OP_NO_TICKET;
#endif
#ifdef SSL_OP_NO_COMPRESSION
ctx_options |= SSL_OP_NO_COMPRESSION;
#endif
#ifdef SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG
/* mitigate CVE-2010-4180 */
ctx_options &= ~SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG;
#endif
#ifdef SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS
/* unless the user explicitly ask to allow the protocol vulnerability we
use the work-around */
if(!SSL_SET_OPTION(enable_beast))
ctx_options &= ~SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS;
#endif
switch(ssl_version) {
case CURL_SSLVERSION_SSLv3:
ctx_options |= SSL_OP_NO_SSLv2;
ctx_options |= SSL_OP_NO_TLSv1;
#if OPENSSL_VERSION_NUMBER >= 0x1000100FL
ctx_options |= SSL_OP_NO_TLSv1_1;
ctx_options |= SSL_OP_NO_TLSv1_2;
#ifdef TLS1_3_VERSION
ctx_options |= SSL_OP_NO_TLSv1_3;
#endif
#endif
break;
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
case CURL_SSLVERSION_TLSv1_0:
case CURL_SSLVERSION_TLSv1_1:
case CURL_SSLVERSION_TLSv1_2:
case CURL_SSLVERSION_TLSv1_3:
/* asking for any TLS version as the minimum, means no SSL versions
allowed */
ctx_options |= SSL_OP_NO_SSLv2;
ctx_options |= SSL_OP_NO_SSLv3;
result = set_ssl_version_min_max(&ctx_options, conn, sockindex);
if(result != CURLE_OK)
return result;
break;
case CURL_SSLVERSION_SSLv2:
ctx_options |= SSL_OP_NO_SSLv3;
ctx_options |= SSL_OP_NO_TLSv1;
#if OPENSSL_VERSION_NUMBER >= 0x1000100FL
ctx_options |= SSL_OP_NO_TLSv1_1;
ctx_options |= SSL_OP_NO_TLSv1_2;
#ifdef TLS1_3_VERSION
ctx_options |= SSL_OP_NO_TLSv1_3;
#endif
#endif
break;
default:
failf(data, "Unrecognized parameter passed via CURLOPT_SSLVERSION");
return CURLE_SSL_CONNECT_ERROR;
}
SSL_CTX_set_options(BACKEND->ctx, ctx_options);
#ifdef HAS_NPN
if(conn->bits.tls_enable_npn)
SSL_CTX_set_next_proto_select_cb(BACKEND->ctx, select_next_proto_cb, conn);
#endif
#ifdef HAS_ALPN
if(conn->bits.tls_enable_alpn) {
int cur = 0;
unsigned char protocols[128];
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2 &&
(!SSL_IS_PROXY() || !conn->bits.tunnel_proxy)) {
protocols[cur++] = NGHTTP2_PROTO_VERSION_ID_LEN;
memcpy(&protocols[cur], NGHTTP2_PROTO_VERSION_ID,
NGHTTP2_PROTO_VERSION_ID_LEN);
cur += NGHTTP2_PROTO_VERSION_ID_LEN;
infof(data, "ALPN, offering %s\n", NGHTTP2_PROTO_VERSION_ID);
}
#endif
protocols[cur++] = ALPN_HTTP_1_1_LENGTH;
memcpy(&protocols[cur], ALPN_HTTP_1_1, ALPN_HTTP_1_1_LENGTH);
cur += ALPN_HTTP_1_1_LENGTH;
infof(data, "ALPN, offering %s\n", ALPN_HTTP_1_1);
/* expects length prefixed preference ordered list of protocols in wire
* format
*/
SSL_CTX_set_alpn_protos(BACKEND->ctx, protocols, cur);
}
#endif
if(ssl_cert || ssl_cert_type) {
if(!cert_stuff(conn, BACKEND->ctx, ssl_cert, ssl_cert_type,
SSL_SET_OPTION(key), SSL_SET_OPTION(key_type),
SSL_SET_OPTION(key_passwd))) {
/* failf() is already done in cert_stuff() */
return CURLE_SSL_CERTPROBLEM;
}
}
ciphers = SSL_CONN_CONFIG(cipher_list);
if(!ciphers)
ciphers = (char *)DEFAULT_CIPHER_SELECTION;
if(ciphers) {
if(!SSL_CTX_set_cipher_list(BACKEND->ctx, ciphers)) {
failf(data, "failed setting cipher list: %s", ciphers);
return CURLE_SSL_CIPHER;
}
infof(data, "Cipher selection: %s\n", ciphers);
}
#ifdef HAVE_SSL_CTX_SET_CIPHERSUITES
{
char *ciphers13 = SSL_CONN_CONFIG(cipher_list13);
if(ciphers13) {
if(!SSL_CTX_set_ciphersuites(BACKEND->ctx, ciphers13)) {
failf(data, "failed setting TLS 1.3 cipher suite: %s", ciphers13);
return CURLE_SSL_CIPHER;
}
infof(data, "TLS 1.3 cipher selection: %s\n", ciphers13);
}
}
#endif
#ifdef HAVE_SSL_CTX_SET_POST_HANDSHAKE_AUTH
/* OpenSSL 1.1.1 requires clients to opt-in for PHA */
SSL_CTX_set_post_handshake_auth(BACKEND->ctx, 1);
#endif
#ifdef USE_TLS_SRP
if(ssl_authtype == CURL_TLSAUTH_SRP) {
char * const ssl_username = SSL_SET_OPTION(username);
infof(data, "Using TLS-SRP username: %s\n", ssl_username);
if(!SSL_CTX_set_srp_username(BACKEND->ctx, ssl_username)) {
failf(data, "Unable to set SRP user name");
return CURLE_BAD_FUNCTION_ARGUMENT;
}
if(!SSL_CTX_set_srp_password(BACKEND->ctx, SSL_SET_OPTION(password))) {
failf(data, "failed setting SRP password");
return CURLE_BAD_FUNCTION_ARGUMENT;
}
if(!SSL_CONN_CONFIG(cipher_list)) {
infof(data, "Setting cipher list SRP\n");
if(!SSL_CTX_set_cipher_list(BACKEND->ctx, "SRP")) {
failf(data, "failed setting SRP cipher list");
return CURLE_SSL_CIPHER;
}
}
}
#endif
if(ssl_cafile || ssl_capath) {
/* tell SSL where to find CA certificates that are used to verify
the servers certificate. */
if(!SSL_CTX_load_verify_locations(BACKEND->ctx, ssl_cafile, ssl_capath)) {
if(verifypeer) {
/* Fail if we insist on successfully verifying the server. */
failf(data, "error setting certificate verify locations:\n"
" CAfile: %s\n CApath: %s",
ssl_cafile ? ssl_cafile : "none",
ssl_capath ? ssl_capath : "none");
return CURLE_SSL_CACERT_BADFILE;
}
/* Just continue with a warning if no strict certificate verification
is required. */
infof(data, "error setting certificate verify locations,"
" continuing anyway:\n");
}
else {
/* Everything is fine. */
infof(data, "successfully set certificate verify locations:\n");
}
infof(data,
" CAfile: %s\n"
" CApath: %s\n",
ssl_cafile ? ssl_cafile : "none",
ssl_capath ? ssl_capath : "none");
}
#ifdef CURL_CA_FALLBACK
else if(verifypeer) {
/* verifying the peer without any CA certificates won't
work so use openssl's built in default as fallback */
SSL_CTX_set_default_verify_paths(BACKEND->ctx);
}
#endif
if(ssl_crlfile) {
/* tell SSL where to find CRL file that is used to check certificate
* revocation */
lookup = X509_STORE_add_lookup(SSL_CTX_get_cert_store(BACKEND->ctx),
X509_LOOKUP_file());
if(!lookup ||
(!X509_load_crl_file(lookup, ssl_crlfile, X509_FILETYPE_PEM)) ) {
failf(data, "error loading CRL file: %s", ssl_crlfile);
return CURLE_SSL_CRL_BADFILE;
}
/* Everything is fine. */
infof(data, "successfully load CRL file:\n");
X509_STORE_set_flags(SSL_CTX_get_cert_store(BACKEND->ctx),
X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL);
infof(data, " CRLfile: %s\n", ssl_crlfile);
}
/* Try building a chain using issuers in the trusted store first to avoid
problems with server-sent legacy intermediates.
Newer versions of OpenSSL do alternate chain checking by default which
gives us the same fix without as much of a performance hit (slight), so we
prefer that if available.
https://rt.openssl.org/Ticket/Display.html?id=3621&user=guest&pass=guest
*/
#if defined(X509_V_FLAG_TRUSTED_FIRST) && !defined(X509_V_FLAG_NO_ALT_CHAINS)
if(verifypeer) {
X509_STORE_set_flags(SSL_CTX_get_cert_store(BACKEND->ctx),
X509_V_FLAG_TRUSTED_FIRST);
}
#endif
/* SSL always tries to verify the peer, this only says whether it should
* fail to connect if the verification fails, or if it should continue
* anyway. In the latter case the result of the verification is checked with
* SSL_get_verify_result() below. */
SSL_CTX_set_verify(BACKEND->ctx,
verifypeer ? SSL_VERIFY_PEER : SSL_VERIFY_NONE, NULL);
/* Enable logging of secrets to the file specified in env SSLKEYLOGFILE. */
#if defined(ENABLE_SSLKEYLOGFILE) && defined(HAVE_KEYLOG_CALLBACK)
if(keylog_file_fp) {
SSL_CTX_set_keylog_callback(BACKEND->ctx, ossl_keylog_callback);
}
#endif
/* Enable the session cache because it's a prerequisite for the "new session"
* callback. Use the "external storage" mode to avoid that OpenSSL creates
* an internal session cache.
*/
SSL_CTX_set_session_cache_mode(BACKEND->ctx,
SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_NO_INTERNAL);
SSL_CTX_sess_set_new_cb(BACKEND->ctx, ossl_new_session_cb);
/* give application a chance to interfere with SSL set up. */
if(data->set.ssl.fsslctx) {
result = (*data->set.ssl.fsslctx)(data, BACKEND->ctx,
data->set.ssl.fsslctxp);
if(result) {
failf(data, "error signaled by ssl ctx callback");
return result;
}
}
/* Lets make an SSL structure */
if(BACKEND->handle)
SSL_free(BACKEND->handle);
BACKEND->handle = SSL_new(BACKEND->ctx);
if(!BACKEND->handle) {
failf(data, "SSL: couldn't create a context (handle)!");
return CURLE_OUT_OF_MEMORY;
}
#if (OPENSSL_VERSION_NUMBER >= 0x0090808fL) && !defined(OPENSSL_NO_TLSEXT) && \
!defined(OPENSSL_NO_OCSP)
if(SSL_CONN_CONFIG(verifystatus))
SSL_set_tlsext_status_type(BACKEND->handle, TLSEXT_STATUSTYPE_ocsp);
#endif
#if defined(OPENSSL_IS_BORINGSSL) && defined(ALLOW_RENEG)
SSL_set_renegotiate_mode(BACKEND->handle, ssl_renegotiate_freely);
#endif
SSL_set_connect_state(BACKEND->handle);
BACKEND->server_cert = 0x0;
#ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME
if((0 == Curl_inet_pton(AF_INET, hostname, &addr)) &&
#ifdef ENABLE_IPV6
(0 == Curl_inet_pton(AF_INET6, hostname, &addr)) &&
#endif
sni &&
!SSL_set_tlsext_host_name(BACKEND->handle, hostname))
infof(data, "WARNING: failed to configure server name indication (SNI) "
"TLS extension\n");
#endif
/* Check if there's a cached ID we can/should use here! */
if(SSL_SET_OPTION(primary.sessionid)) {
void *ssl_sessionid = NULL;
int connectdata_idx = ossl_get_ssl_conn_index();
int sockindex_idx = ossl_get_ssl_sockindex_index();
if(connectdata_idx >= 0 && sockindex_idx >= 0) {
/* Store the data needed for the "new session" callback.
* The sockindex is stored as a pointer to an array element. */
SSL_set_ex_data(BACKEND->handle, connectdata_idx, conn);
SSL_set_ex_data(BACKEND->handle, sockindex_idx, conn->sock + sockindex);
}
Curl_ssl_sessionid_lock(conn);
if(!Curl_ssl_getsessionid(conn, &ssl_sessionid, NULL, sockindex)) {
/* we got a session id, use it! */
if(!SSL_set_session(BACKEND->handle, ssl_sessionid)) {
Curl_ssl_sessionid_unlock(conn);
failf(data, "SSL: SSL_set_session failed: %s",
ossl_strerror(ERR_get_error(), error_buffer,
sizeof(error_buffer)));
return CURLE_SSL_CONNECT_ERROR;
}
/* Informational message */
infof(data, "SSL re-using session ID\n");
}
Curl_ssl_sessionid_unlock(conn);
}
if(conn->proxy_ssl[sockindex].use) {
BIO *const bio = BIO_new(BIO_f_ssl());
SSL *handle = conn->proxy_ssl[sockindex].backend->handle;
DEBUGASSERT(ssl_connection_complete == conn->proxy_ssl[sockindex].state);
DEBUGASSERT(handle != NULL);
DEBUGASSERT(bio != NULL);
BIO_set_ssl(bio, handle, FALSE);
SSL_set_bio(BACKEND->handle, bio, bio);
}
else if(!SSL_set_fd(BACKEND->handle, (int)sockfd)) {
/* pass the raw socket into the SSL layers */
failf(data, "SSL: SSL_set_fd failed: %s",
ossl_strerror(ERR_get_error(), error_buffer, sizeof(error_buffer)));
return CURLE_SSL_CONNECT_ERROR;
}
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
static CURLcode ossl_connect_step2(struct connectdata *conn, int sockindex)
{
struct Curl_easy *data = conn->data;
int err;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
long * const certverifyresult = SSL_IS_PROXY() ?
&data->set.proxy_ssl.certverifyresult : &data->set.ssl.certverifyresult;
DEBUGASSERT(ssl_connect_2 == connssl->connecting_state
|| ssl_connect_2_reading == connssl->connecting_state
|| ssl_connect_2_writing == connssl->connecting_state);
ERR_clear_error();
err = SSL_connect(BACKEND->handle);
/* If keylogging is enabled but the keylog callback is not supported then log
secrets here, immediately after SSL_connect by using tap_ssl_key. */
#if defined(ENABLE_SSLKEYLOGFILE) && !defined(HAVE_KEYLOG_CALLBACK)
tap_ssl_key(BACKEND->handle, &BACKEND->tap_state);
#endif
/* 1 is fine
0 is "not successful but was shut down controlled"
<0 is "handshake was not successful, because a fatal error occurred" */
if(1 != err) {
int detail = SSL_get_error(BACKEND->handle, err);
if(SSL_ERROR_WANT_READ == detail) {
connssl->connecting_state = ssl_connect_2_reading;
return CURLE_OK;
}
if(SSL_ERROR_WANT_WRITE == detail) {
connssl->connecting_state = ssl_connect_2_writing;
return CURLE_OK;
}
else {
/* untreated error */
unsigned long errdetail;
char error_buffer[256]="";
CURLcode result;
long lerr;
int lib;
int reason;
/* the connection failed, we're not waiting for anything else. */
connssl->connecting_state = ssl_connect_2;
/* Get the earliest error code from the thread's error queue and removes
the entry. */
errdetail = ERR_get_error();
/* Extract which lib and reason */
lib = ERR_GET_LIB(errdetail);
reason = ERR_GET_REASON(errdetail);
if((lib == ERR_LIB_SSL) &&
(reason == SSL_R_CERTIFICATE_VERIFY_FAILED)) {
result = CURLE_PEER_FAILED_VERIFICATION;
lerr = SSL_get_verify_result(BACKEND->handle);
if(lerr != X509_V_OK) {
*certverifyresult = lerr;
msnprintf(error_buffer, sizeof(error_buffer),
"SSL certificate problem: %s",
X509_verify_cert_error_string(lerr));
}
else
/* strcpy() is fine here as long as the string fits within
error_buffer */
strcpy(error_buffer, "SSL certificate verification failed");
}
else {
result = CURLE_SSL_CONNECT_ERROR;
ossl_strerror(errdetail, error_buffer, sizeof(error_buffer));
}
/* detail is already set to the SSL error above */
/* If we e.g. use SSLv2 request-method and the server doesn't like us
* (RST connection etc.), OpenSSL gives no explanation whatsoever and
* the SO_ERROR is also lost.
*/
if(CURLE_SSL_CONNECT_ERROR == result && errdetail == 0) {
const char * const hostname = SSL_IS_PROXY() ?
conn->http_proxy.host.name : conn->host.name;
const long int port = SSL_IS_PROXY() ? conn->port : conn->remote_port;
failf(data, OSSL_PACKAGE " SSL_connect: %s in connection to %s:%ld ",
SSL_ERROR_to_str(detail), hostname, port);
return result;
}
/* Could be a CERT problem */
failf(data, "%s", error_buffer);
return result;
}
}
else {
/* we have been connected fine, we're not waiting for anything else. */
connssl->connecting_state = ssl_connect_3;
/* Informational message */
infof(data, "SSL connection using %s / %s\n",
get_ssl_version_txt(BACKEND->handle),
SSL_get_cipher(BACKEND->handle));