/***************************************************************************
 *                                  _   _ ____  _
 *  Project                     ___| | | |  _ \| |
 *                             / __| | | | |_) | |
 *                            | (__| |_| |  _ <| |___
 *                             \___|\___/|_| \_\_____|
 *
 * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
 *
 * This software is licensed as described in the file COPYING, which
 * you should have received as part of this distribution. The terms
 * are also available at https://curl.se/docs/copyright.html.
 *
 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 * copies of the Software, and permit persons to whom the Software is
 * furnished to do so, under the terms of the COPYING file.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 * SPDX-License-Identifier: curl
 *
 ***************************************************************************/
#include "tool_setup.h"

#ifdef HAVE_FCNTL_H
#  include <fcntl.h>
#endif

#ifdef HAVE_LOCALE_H
#  include <locale.h>
#endif

#ifdef HAVE_SYS_SELECT_H
#  include <sys/select.h>
#elif defined(HAVE_UNISTD_H)
#  include <unistd.h>
#endif

#ifdef __VMS
#  include <fabdef.h>
#endif

#ifdef __AMIGA__
#  include <proto/dos.h>
#endif

#define ENABLE_CURLX_PRINTF
/* use our own printf() functions */
#include "curlx.h"

#include "tool_binmode.h"
#include "tool_cfgable.h"
#include "tool_cb_dbg.h"
#include "tool_cb_hdr.h"
#include "tool_cb_prg.h"
#include "tool_cb_rea.h"
#include "tool_cb_see.h"
#include "tool_cb_wrt.h"
#include "tool_dirhie.h"
#include "tool_doswin.h"
#include "tool_easysrc.h"
#include "tool_filetime.h"
#include "tool_getparam.h"
#include "tool_helpers.h"
#include "tool_findfile.h"
#include "tool_libinfo.h"
#include "tool_main.h"
#include "tool_msgs.h"
#include "tool_operate.h"
#include "tool_operhlp.h"
#include "tool_paramhlp.h"
#include "tool_parsecfg.h"
#include "tool_setopt.h"
#include "tool_sleep.h"
#include "tool_urlglob.h"
#include "tool_util.h"
#include "tool_writeout.h"
#include "tool_xattr.h"
#include "tool_vms.h"
#include "tool_help.h"
#include "tool_hugehelp.h"
#include "tool_progress.h"
#include "tool_ipfs.h"
#include "dynbuf.h"

#include "memdebug.h" /* keep this as LAST include */

#ifdef CURLDEBUG
/* libcurl's debug builds provide an extra function */
CURLcode curl_easy_perform_ev(CURL *easy);
#endif

#ifndef O_BINARY
/* since O_BINARY as used in bitmasks, setting it to zero makes it usable in
   source code but yet it doesn't ruin anything */
#  define O_BINARY 0
#endif

#define CURL_CA_CERT_ERRORMSG                                               \
  "More details here: https://curl.se/docs/sslcerts.html\n\n"          \
  "curl failed to verify the legitimacy of the server and therefore "       \
  "could not\nestablish a secure connection to it. To learn more about "    \
  "this situation and\nhow to fix it, please visit the web page mentioned " \
  "above.\n"

static CURLcode single_transfer(struct GlobalConfig *global,
                                struct OperationConfig *config,
                                CURLSH *share,
                                bool capath_from_env,
                                bool *added);
static CURLcode create_transfer(struct GlobalConfig *global,
                                CURLSH *share,
                                bool *added);

static bool is_fatal_error(CURLcode code)
{
  switch(code) {
  case CURLE_FAILED_INIT:
  case CURLE_OUT_OF_MEMORY:
  case CURLE_UNKNOWN_OPTION:
  case CURLE_FUNCTION_NOT_FOUND:
  case CURLE_BAD_FUNCTION_ARGUMENT:
    /* critical error */
    return TRUE;
  default:
    break;
  }

  /* no error or not critical */
  return FALSE;
}

/*
 * Check if a given string is a PKCS#11 URI
 */
static bool is_pkcs11_uri(const char *string)
{
  if(curl_strnequal(string, "pkcs11:", 7)) {
    return TRUE;
  }
  else {
    return FALSE;
  }
}

#ifdef __VMS
/*
 * get_vms_file_size does what it takes to get the real size of the file
 *
 * For fixed files, find out the size of the EOF block and adjust.
 *
 * For all others, have to read the entire file in, discarding the contents.
 * Most posted text files will be small, and binary files like zlib archives
 * and CD/DVD images should be either a STREAM_LF format or a fixed format.
 *
 */
static curl_off_t vms_realfilesize(const char *name,
                                   const struct_stat *stat_buf)
{
  char buffer[8192];
  curl_off_t count;
  int ret_stat;
  FILE * file;

  /* !checksrc! disable FOPENMODE 1 */
  file = fopen(name, "r"); /* VMS */
  if(!file) {
    return 0;
  }
  count = 0;
  ret_stat = 1;
  while(ret_stat > 0) {
    ret_stat = fread(buffer, 1, sizeof(buffer), file);
    if(ret_stat)
      count += ret_stat;
  }
  fclose(file);

  return count;
}

/*
 *
 *  VmsSpecialSize checks to see if the stat st_size can be trusted and
 *  if not to call a routine to get the correct size.
 *
 */
static curl_off_t VmsSpecialSize(const char *name,
                                 const struct_stat *stat_buf)
{
  switch(stat_buf->st_fab_rfm) {
  case FAB$C_VAR:
  case FAB$C_VFC:
    return vms_realfilesize(name, stat_buf);
    break;
  default:
    return stat_buf->st_size;
  }
}
#endif /* __VMS */

#define BUFFER_SIZE (100*1024)

struct per_transfer *transfers; /* first node */
static struct per_transfer *transfersl; /* last node */
static curl_off_t all_pers;

/* add_per_transfer creates a new 'per_transfer' node in the linked
   list of transfers */
static CURLcode add_per_transfer(struct per_transfer **per)
{
  struct per_transfer *p;
  p = calloc(1, sizeof(struct per_transfer));
  if(!p)
    return CURLE_OUT_OF_MEMORY;
  if(!transfers)
    /* first entry */
    transfersl = transfers = p;
  else {
    /* make the last node point to the new node */
    transfersl->next = p;
    /* make the new node point back to the formerly last node */
    p->prev = transfersl;
    /* move the last node pointer to the new entry */
    transfersl = p;
  }
  *per = p;
  all_xfers++; /* count total number of transfers added */
  all_pers++;

  return CURLE_OK;
}

/* Remove the specified transfer from the list (and free it), return the next
   in line */
static struct per_transfer *del_per_transfer(struct per_transfer *per)
{
  struct per_transfer *n;
  struct per_transfer *p;
  DEBUGASSERT(transfers);
  DEBUGASSERT(transfersl);
  DEBUGASSERT(per);

  n = per->next;
  p = per->prev;

  if(p)
    p->next = n;
  else
    transfers = n;

  if(n)
    n->prev = p;
  else
    transfersl = p;

  free(per);
  all_pers--;

  return n;
}

static CURLcode pre_transfer(struct GlobalConfig *global,
                             struct per_transfer *per)
{
  curl_off_t uploadfilesize = -1;
  struct_stat fileinfo;
  CURLcode result = CURLE_OK;

  if(per->uploadfile && !stdin_upload(per->uploadfile)) {
    /* VMS Note:
     *
     * Reading binary from files can be a problem...  Only FIXED, VAR
     * etc WITHOUT implied CC will work. Others need a \n appended to
     * a line
     *
     * - Stat gives a size but this is UNRELIABLE in VMS. E.g.
     * a fixed file with implied CC needs to have a byte added for every
     * record processed, this can be derived from Filesize & recordsize
     * for VARiable record files the records need to be counted!  for
     * every record add 1 for linefeed and subtract 2 for the record
     * header for VARIABLE header files only the bare record data needs
     * to be considered with one appended if implied CC
     */
#ifdef __VMS
    /* Calculate the real upload size for VMS */
    per->infd = -1;
    if(stat(per->uploadfile, &fileinfo) == 0) {
      fileinfo.st_size = VmsSpecialSize(uploadfile, &fileinfo);
      switch(fileinfo.st_fab_rfm) {
      case FAB$C_VAR:
      case FAB$C_VFC:
      case FAB$C_STMCR:
        per->infd = open(per->uploadfile, O_RDONLY | O_BINARY);
        break;
      default:
        per->infd = open(per->uploadfile, O_RDONLY | O_BINARY,
                        "rfm=stmlf", "ctx=stm");
      }
    }
    if(per->infd == -1)
#else
      per->infd = open(per->uploadfile, O_RDONLY | O_BINARY);
    if((per->infd == -1) || fstat(per->infd, &fileinfo))
#endif
    {
      helpf(tool_stderr, "Can't open '%s'", per->uploadfile);
      if(per->infd != -1) {
        close(per->infd);
        per->infd = STDIN_FILENO;
      }
      return CURLE_READ_ERROR;
    }
    per->infdopen = TRUE;

    /* we ignore file size for char/block devices, sockets, etc. */
    if(S_ISREG(fileinfo.st_mode))
      uploadfilesize = fileinfo.st_size;

#ifdef DEBUGBUILD
    /* allow dedicated test cases to override */
    {
      char *ev = getenv("CURL_UPLOAD_SIZE");
      if(ev) {
        int sz = atoi(ev);
        uploadfilesize = (curl_off_t)sz;
      }
    }
#endif

    if(uploadfilesize != -1) {
      struct OperationConfig *config = per->config; /* for the macro below */
#ifdef CURL_DISABLE_LIBCURL_OPTION
      (void)config;
      (void)global;
#endif
      my_setopt(per->curl, CURLOPT_INFILESIZE_LARGE, uploadfilesize);
    }
  }
  per->uploadfilesize = uploadfilesize;
  per->start = tvnow();
  return result;
}

/* When doing serial transfers, we use a single fixed error area */
static char global_errorbuffer[CURL_ERROR_SIZE];

void single_transfer_cleanup(struct OperationConfig *config)
{
  if(config) {
    struct State *state = &config->state;
    if(state->urls) {
      /* Free list of remaining URLs */
      glob_cleanup(state->urls);
      state->urls = NULL;
    }
    Curl_safefree(state->outfiles);
    Curl_safefree(state->uploadfile);
    if(state->inglob) {
      /* Free list of globbed upload files */
      glob_cleanup(state->inglob);
      state->inglob = NULL;
    }
  }
}

/*
 * Call this after a transfer has completed.
 */
static CURLcode post_per_transfer(struct GlobalConfig *global,
                                  struct per_transfer *per,
                                  CURLcode result,
                                  bool *retryp,
                                  long *delay) /* milliseconds! */
{
  struct OutStruct *outs = &per->outs;
  CURL *curl = per->curl;
  struct OperationConfig *config = per->config;
  int rc;

  if(!curl || !config)
    return result;

  *retryp = FALSE;
  *delay = 0; /* for no retry, keep it zero */

  if(per->infdopen)
    close(per->infd);

#ifdef __VMS
  if(is_vms_shell()) {
    /* VMS DCL shell behavior */
    if(global->silent && !global->showerror)
      vms_show = VMSSTS_HIDE;
  }
  else
#endif
    if(!config->synthetic_error && result &&
       (!global->silent || global->showerror)) {
      const char *msg = per->errorbuffer;
      fprintf(tool_stderr, "curl: (%d) %s\n", result,
              (msg && msg[0]) ? msg : curl_easy_strerror(result));
      if(result == CURLE_PEER_FAILED_VERIFICATION)
        fputs(CURL_CA_CERT_ERRORMSG, tool_stderr);
    }
    else if(config->failwithbody) {
      /* if HTTP response >= 400, return error */
      long code = 0;
      curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &code);
      if(code >= 400) {
        if(!global->silent || global->showerror)
          fprintf(tool_stderr,
                  "curl: (%d) The requested URL returned error: %ld\n",
                  CURLE_HTTP_RETURNED_ERROR, code);
        result = CURLE_HTTP_RETURNED_ERROR;
      }
    }
  /* Set file extended attributes */
  if(!result && config->xattr && outs->fopened && outs->stream) {
    rc = fwrite_xattr(curl, per->this_url, fileno(outs->stream));
    if(rc)
      warnf(config->global, "Error setting extended attributes on '%s': %s",
            outs->filename, strerror(errno));
  }

  if(!result && !outs->stream && !outs->bytes) {
    /* we have received no data despite the transfer was successful
       ==> force creation of an empty output file (if an output file
       was specified) */
    long cond_unmet = 0L;
    /* do not create (or even overwrite) the file in case we get no
       data because of unmet condition */
    curl_easy_getinfo(curl, CURLINFO_CONDITION_UNMET, &cond_unmet);
    if(!cond_unmet && !tool_create_output_file(outs, config))
      result = CURLE_WRITE_ERROR;
  }

  if(!outs->s_isreg && outs->stream) {
    /* Dump standard stream buffered data */
    rc = fflush(outs->stream);
    if(!result && rc) {
      /* something went wrong in the writing process */
      result = CURLE_WRITE_ERROR;
      errorf(global, "Failed writing body");
    }
  }

#ifdef _WIN32
  /* Discard incomplete UTF-8 sequence buffered from body */
  if(outs->utf8seq[0])
    memset(outs->utf8seq, 0, sizeof(outs->utf8seq));
#endif

  /* if retry-max-time is non-zero, make sure we haven't exceeded the
     time */
  if(per->retry_numretries &&
     (!config->retry_maxtime ||
      (tvdiff(tvnow(), per->retrystart) <
       config->retry_maxtime*1000L)) ) {
    enum {
      RETRY_NO,
      RETRY_ALL_ERRORS,
      RETRY_TIMEOUT,
      RETRY_CONNREFUSED,
      RETRY_HTTP,
      RETRY_FTP,
      RETRY_LAST /* not used */
    } retry = RETRY_NO;
    long response = 0;
    if((CURLE_OPERATION_TIMEDOUT == result) ||
       (CURLE_COULDNT_RESOLVE_HOST == result) ||
       (CURLE_COULDNT_RESOLVE_PROXY == result) ||
       (CURLE_FTP_ACCEPT_TIMEOUT == result))
      /* retry timeout always */
      retry = RETRY_TIMEOUT;
    else if(config->retry_connrefused &&
            (CURLE_COULDNT_CONNECT == result)) {
      long oserrno = 0;
      curl_easy_getinfo(curl, CURLINFO_OS_ERRNO, &oserrno);
      if(ECONNREFUSED == oserrno)
        retry = RETRY_CONNREFUSED;
    }
    else if((CURLE_OK == result) ||
            ((config->failonerror || config->failwithbody) &&
             (CURLE_HTTP_RETURNED_ERROR == result))) {
      /* If it returned OK. _or_ failonerror was enabled and it
         returned due to such an error, check for HTTP transient
         errors to retry on. */
      const char *scheme;
      curl_easy_getinfo(curl, CURLINFO_SCHEME, &scheme);
      scheme = proto_token(scheme);
      if(scheme == proto_http || scheme == proto_https) {
        /* This was HTTP(S) */
        curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);

        switch(response) {
        case 408: /* Request Timeout */
        case 429: /* Too Many Requests (RFC6585) */
        case 500: /* Internal Server Error */
        case 502: /* Bad Gateway */
        case 503: /* Service Unavailable */
        case 504: /* Gateway Timeout */
          retry = RETRY_HTTP;
          /*
           * At this point, we have already written data to the output
           * file (or terminal). If we write to a file, we must rewind
           * or close/re-open the file so that the next attempt starts
           * over from the beginning.
           *
           * TODO: similar action for the upload case. We might need
           * to start over reading from a previous point if we have
           * uploaded something when this was returned.
           */
          break;
        }
      }
    } /* if CURLE_OK */
    else if(result) {
      const char *scheme;

      curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response);
      curl_easy_getinfo(curl, CURLINFO_SCHEME, &scheme);
      scheme = proto_token(scheme);

      if((scheme == proto_ftp || scheme == proto_ftps) && response / 100 == 4)
        /*
         * This is typically when the FTP server only allows a certain
         * amount of users and we are not one of them.  All 4xx codes
         * are transient.
         */
        retry = RETRY_FTP;
    }

    if(result && !retry && config->retry_all_errors)
      retry = RETRY_ALL_ERRORS;

    if(retry) {
      long sleeptime = 0;
      curl_off_t retry_after = 0;
      static const char * const m[]={
        NULL,
        "(retrying all errors)",
        ": timeout",
        ": connection refused",
        ": HTTP error",
        ": FTP error"
      };

      sleeptime = per->retry_sleep;
      if(RETRY_HTTP == retry) {
        curl_easy_getinfo(curl, CURLINFO_RETRY_AFTER, &retry_after);
        if(retry_after) {
          /* store in a 'long', make sure it doesn't overflow */
          if(retry_after > LONG_MAX/1000)
            sleeptime = LONG_MAX;
          else
            sleeptime = (long)retry_after * 1000; /* milliseconds */

          /* if adding retry_after seconds to the process would exceed the
             maximum time allowed for retrying, then exit the retries right
             away */
          if(config->retry_maxtime) {
            curl_off_t seconds = tvdiff(tvnow(), per->retrystart)/1000;

            if((CURL_OFF_T_MAX - retry_after < seconds) ||
               (seconds + retry_after > config->retry_maxtime)) {
              warnf(config->global, "The Retry-After: time would "
                    "make this command line exceed the maximum allowed time "
                    "for retries.");
              goto noretry;
            }
          }
        }
      }
      warnf(config->global, "Problem %s. "
            "Will retry in %ld seconds. "
            "%ld retries left.",
            m[retry], sleeptime/1000L, per->retry_numretries);

      per->retry_numretries--;
      if(!config->retry_delay) {
        per->retry_sleep *= 2;
        if(per->retry_sleep > RETRY_SLEEP_MAX)
          per->retry_sleep = RETRY_SLEEP_MAX;
      }
      if(outs->bytes && outs->filename && outs->stream) {
        /* We have written data to an output file, we truncate file
         */
        notef(config->global,
              "Throwing away %"  CURL_FORMAT_CURL_OFF_T " bytes",
              outs->bytes);
        fflush(outs->stream);
        /* truncate file at the position where we started appending */
#ifdef HAVE_FTRUNCATE
        if(ftruncate(fileno(outs->stream), outs->init)) {
          /* when truncate fails, we can't just append as then we'll
             create something strange, bail out */
          errorf(config->global, "Failed to truncate file");
          return CURLE_WRITE_ERROR;
        }
        /* now seek to the end of the file, the position where we
           just truncated the file in a large file-safe way */
        rc = fseek(outs->stream, 0, SEEK_END);
#else
        /* ftruncate is not available, so just reposition the file
           to the location we would have truncated it. This won't
           work properly with large files on 32-bit systems, but
           most of those will have ftruncate. */
        rc = fseek(outs->stream, (long)outs->init, SEEK_SET);
#endif
        if(rc) {
          errorf(config->global, "Failed seeking to end of file");
          return CURLE_WRITE_ERROR;
        }
        outs->bytes = 0; /* clear for next round */
      }
      *retryp = TRUE;
      *delay = sleeptime;
      return CURLE_OK;
    }
  } /* if retry_numretries */
noretry:

  if((global->progressmode == CURL_PROGRESS_BAR) &&
     per->progressbar.calls)
    /* if the custom progress bar has been displayed, we output a
       newline here */
    fputs("\n", per->progressbar.out);

  /* Close the outs file */
  if(outs->fopened && outs->stream) {
    rc = fclose(outs->stream);
    if(!result && rc) {
      /* something went wrong in the writing process */
      result = CURLE_WRITE_ERROR;
      errorf(config->global, "curl: (%d) Failed writing body", result);
    }
    if(result && config->rm_partial) {
      struct_stat st;
      if(!stat(outs->filename, &st) &&
         S_ISREG(st.st_mode)) {
        if(!unlink(outs->filename))
          notef(global, "Removed output file: %s", outs->filename);
        else
          warnf(global, "Failed removing: %s", outs->filename);
      }
      else
        warnf(global, "Skipping removal; not a regular file: %s",
              outs->filename);
    }
  }

  /* File time can only be set _after_ the file has been closed */
  if(!result && config->remote_time && outs->s_isreg && outs->filename) {
    /* Ask libcurl if we got a remote file time */
    curl_off_t filetime = -1;
    curl_easy_getinfo(curl, CURLINFO_FILETIME_T, &filetime);
    setfiletime(filetime, outs->filename, global);
  }

  /* Write the --write-out data before cleanup but after result is final */
  if(config->writeout)
    ourWriteOut(config, per, result);

  /* Close function-local opened file descriptors */
  if(per->heads.fopened && per->heads.stream)
    fclose(per->heads.stream);

  if(per->heads.alloc_filename)
    Curl_safefree(per->heads.filename);

  if(per->etag_save.fopened && per->etag_save.stream)
    fclose(per->etag_save.stream);

  if(per->etag_save.alloc_filename)
    Curl_safefree(per->etag_save.filename);

  curl_easy_cleanup(per->curl);
  if(outs->alloc_filename)
    free(outs->filename);
  free(per->this_url);
  free(per->outfile);
  free(per->uploadfile);
  if(global->parallel)
    free(per->errorbuffer);

  return result;
}

/*
 * Return the protocol token for the scheme used in the given URL
 */
static CURLcode url_proto(char **url,
                          struct OperationConfig *config,
                          char **scheme)
{
  CURLcode result = CURLE_OK;
  CURLU *uh = curl_url();
  const char *proto = NULL;
  *scheme = NULL;

  if(uh) {
    if(*url) {
      char *schemep = NULL;

      if(!curl_url_set(uh, CURLUPART_URL, *url,
                       CURLU_GUESS_SCHEME | CURLU_NON_SUPPORT_SCHEME) &&
         !curl_url_get(uh, CURLUPART_SCHEME, &schemep,
                       CURLU_DEFAULT_SCHEME)) {
        if(curl_strequal(schemep, proto_ipfs) ||
           curl_strequal(schemep, proto_ipns)) {
          result = ipfs_url_rewrite(uh, schemep, url, config);
          /* short-circuit proto_token, we know it's ipfs or ipns */
          if(curl_strequal(schemep, proto_ipfs))
            proto = proto_ipfs;
          else if(curl_strequal(schemep, proto_ipns))
            proto = proto_ipns;
          if(result)
            config->synthetic_error = TRUE;
        }
        else
          proto = proto_token(schemep);

        curl_free(schemep);
      }
    }
    curl_url_cleanup(uh);
  }

  *scheme = (char *) (proto? proto: "???");   /* Never match if not found. */
  return result;
}

/* create the next (singular) transfer */
static CURLcode single_transfer(struct GlobalConfig *global,
                                struct OperationConfig *config,
                                CURLSH *share,
                                bool capath_from_env,
                                bool *added)
{
  CURLcode result = CURLE_OK;
  struct getout *urlnode;
  bool orig_noprogress = global->noprogress;
  bool orig_isatty = global->isatty;
  struct State *state = &config->state;
  char *httpgetfields = state->httpgetfields;

  *added = FALSE; /* not yet */

  if(config->postfields) {
    if(config->use_httpget) {
      if(!httpgetfields) {
        /* Use the postfields data for an HTTP get */
        httpgetfields = state->httpgetfields = config->postfields;
        config->postfields = NULL;
        if(SetHTTPrequest(config,
                          (config->no_body?HTTPREQ_HEAD:HTTPREQ_GET),
                          &config->httpreq)) {
          result = CURLE_FAILED_INIT;
        }
      }
    }
    else {
      if(SetHTTPrequest(config, HTTPREQ_SIMPLEPOST, &config->httpreq))
        result = CURLE_FAILED_INIT;
    }
    if(result) {
      single_transfer_cleanup(config);
      return result;
    }
  }
  if(!state->urlnode) {
    /* first time caller, setup things */
    state->urlnode = config->url_list;
    state->infilenum = 1;
  }

  while(config->state.urlnode) {
    static bool warn_more_options = FALSE;
    char *infiles; /* might be a glob pattern */
    struct URLGlob *inglob = state->inglob;
    urlnode = config->state.urlnode;

    /* urlnode->url is the full URL (it might be NULL) */

    if(!urlnode->url) {
      /* This node has no URL. Free node data without destroying the
         node itself nor modifying next pointer and continue to next */
      Curl_safefree(urlnode->outfile);
      Curl_safefree(urlnode->infile);
      urlnode->flags = 0;
      config->state.urlnode = urlnode->next;
      state->up = 0;
      if(!warn_more_options) {
        /* only show this once */
        warnf(config->global, "Got more output options than URLs");
        warn_more_options = TRUE;
      }
      continue; /* next URL please */
    }

    /* save outfile pattern before expansion */
    if(urlnode->outfile && !state->outfiles) {
      state->outfiles = strdup(urlnode->outfile);
      if(!state->outfiles) {
        errorf(global, "out of memory");
        result = CURLE_OUT_OF_MEMORY;
        break;
      }
    }

    infiles = urlnode->infile;

    if(!config->globoff && infiles && !inglob) {
      /* Unless explicitly shut off */
      result = glob_url(&inglob, infiles, &state->infilenum,
                        (!global->silent || global->showerror)?
                        tool_stderr:NULL);
      if(result)
        break;
      config->state.inglob = inglob;
    }

    {
      curl_off_t urlnum;

      if(!state->up && !infiles)
        Curl_nop_stmt;
      else {
        if(!state->uploadfile) {
          if(inglob) {
            result = glob_next_url(&state->uploadfile, inglob);
            if(result == CURLE_OUT_OF_MEMORY)
              errorf(global, "out of memory");
          }
          else if(!state->up) {
            state->uploadfile = strdup(infiles);
            if(!state->uploadfile) {
              errorf(global, "out of memory");
              result = CURLE_OUT_OF_MEMORY;
            }
          }
        }
        if(result)
          break;
      }

      if(!state->urlnum) {
        if(!config->globoff) {
          /* Unless explicitly shut off, we expand '{...}' and '[...]'
             expressions and return total number of URLs in pattern set */
          result = glob_url(&state->urls, urlnode->url, &state->urlnum,
                            (!global->silent || global->showerror)?
                            tool_stderr:NULL);
          if(result)
            break;
          urlnum = state->urlnum;
        }
        else
          urlnum = 1; /* without globbing, this is a single URL */
      }
      else
        urlnum = state->urlnum;

      if(state->up < state->infilenum) {
        struct per_transfer *per = NULL;
        struct OutStruct *outs;
        struct OutStruct *heads;
        struct OutStruct *etag_save;
        struct HdrCbData *hdrcbdata = NULL;
        struct OutStruct etag_first;
        char *use_proto;
        CURL *curl;

        /* --etag-save */
        memset(&etag_first, 0, sizeof(etag_first));
        etag_save = &etag_first;
        etag_save->stream = stdout;

        /* --etag-compare */
        if(config->etag_compare_file) {
          char *etag_from_file = NULL;
          char *header = NULL;
          ParameterError pe;

          /* open file for reading: */
          FILE *file = fopen(config->etag_compare_file, FOPEN_READTEXT);
          if(!file && !config->etag_save_file) {
            errorf(global,
                   "Failed to open %s", config->etag_compare_file);
            result = CURLE_READ_ERROR;
            break;
          }

          if((PARAM_OK == file2string(&etag_from_file, file)) &&
             etag_from_file) {
            header = aprintf("If-None-Match: %s", etag_from_file);
            Curl_safefree(etag_from_file);
          }
          else
            header = aprintf("If-None-Match: \"\"");

          if(!header) {
            if(file)
              fclose(file);
            errorf(global,
                   "Failed to allocate memory for custom etag header");
            result = CURLE_OUT_OF_MEMORY;
            break;
          }

          /* add Etag from file to list of custom headers */
          pe = add2list(&config->headers, header);
          Curl_safefree(header);

          if(file)
            fclose(file);
          if(pe != PARAM_OK) {
            result = CURLE_OUT_OF_MEMORY;
            break;
          }
        }

        if(config->etag_save_file) {
          /* open file for output: */
          if(strcmp(config->etag_save_file, "-")) {
            FILE *newfile = fopen(config->etag_save_file, "wb");
            if(!newfile) {
              warnf(global, "Failed creating file for saving etags: \"%s\". "
                    "Skip this transfer", config->etag_save_file);
              Curl_safefree(state->outfiles);
              glob_cleanup(state->urls);
              return CURLE_OK;
            }
            else {
              etag_save->filename = config->etag_save_file;
              etag_save->s_isreg = TRUE;
              etag_save->fopened = TRUE;
              etag_save->stream = newfile;
            }
          }
          else {
            /* always use binary mode for protocol header output */
            set_binmode(etag_save->stream);
          }
        }

        curl = curl_easy_init();
        if(curl)
          result = add_per_transfer(&per);
        else
          result = CURLE_OUT_OF_MEMORY;
        if(result) {
          curl_easy_cleanup(curl);
          if(etag_save->fopened)
            fclose(etag_save->stream);
          break;
        }
        per->etag_save = etag_first; /* copy the whole struct */
        if(state->uploadfile) {
          per->uploadfile = strdup(state->uploadfile);
          if(!per->uploadfile) {
            curl_easy_cleanup(curl);
            result = CURLE_OUT_OF_MEMORY;
            break;
          }
          if(SetHTTPrequest(config, HTTPREQ_PUT, &config->httpreq)) {
            Curl_safefree(per->uploadfile);
            curl_easy_cleanup(curl);
            result = CURLE_FAILED_INIT;
            break;
          }
        }
        *added = TRUE;
        per->config = config;
        per->curl = curl;
        per->urlnum = urlnode->num;

        /* default headers output stream is stdout */
        heads = &per->heads;
        heads->stream = stdout;

        /* Single header file for all URLs */
        if(config->headerfile) {
          /* open file for output: */
          if(strcmp(config->headerfile, "-")) {
            FILE *newfile;

            /*
             * Since every transfer has its own file handle for dumping
             * the headers, we need to open it in append mode, since transfers
             * might finish in any order.
             * The first transfer just clears the file.
             * TODO: Consider placing the file handle inside the
             * OperationConfig, so that it does not need to be opened/closed
             * for every transfer.
             */
            if(!per->prev || per->prev->config != config) {
              newfile = fopen(config->headerfile, "wb");
              if(newfile)
                fclose(newfile);
            }
            newfile = fopen(config->headerfile, "ab");

            if(!newfile) {
              errorf(global, "Failed to open %s", config->headerfile);
              result = CURLE_WRITE_ERROR;
              break;
            }
            else {
              heads->filename = config->headerfile;
              heads->s_isreg = TRUE;
              heads->fopened = TRUE;
              heads->stream = newfile;
            }
          }
          else {
            /* always use binary mode for protocol header output */
            set_binmode(heads->stream);
          }
        }

        hdrcbdata = &per->hdrcbdata;

        outs = &per->outs;

        per->outfile = NULL;
        per->infdopen = FALSE;
        per->infd = STDIN_FILENO;

        /* default output stream is stdout */
        outs->stream = stdout;

        if(state->urls) {
          result = glob_next_url(&per->this_url, state->urls);
          if(result)
            break;
        }
        else if(!state->li) {
          per->this_url = strdup(urlnode->url);
          if(!per->this_url) {
            result = CURLE_OUT_OF_MEMORY;
            break;
          }
        }
        else
          per->this_url = NULL;
        if(!per->this_url)
          break;

        if(state->outfiles) {
          per->outfile = strdup(state->outfiles);
          if(!per->outfile) {
            result = CURLE_OUT_OF_MEMORY;
            break;
          }
        }

        if(((urlnode->flags&GETOUT_USEREMOTE) ||
            (per->outfile && strcmp("-", per->outfile)))) {

          /*
           * We have specified a file name to store the result in, or we have
           * decided we want to use the remote file name.
           */

          if(!per->outfile) {
            /* extract the file name from the URL */
            result = get_url_file_name(&per->outfile, per->this_url);
            if(result) {
              errorf(global, "Failed to extract a sensible file name"
                     " from the URL to use for storage");
              break;
            }
            if(!*per->outfile && !config->content_disposition) {
              errorf(global, "Remote file name has no length");
              result = CURLE_WRITE_ERROR;
              break;
            }
          }
          else if(state->urls) {
            /* fill '#1' ... '#9' terms from URL pattern */
            char *storefile = per->outfile;
            result = glob_match_url(&per->outfile, storefile, state->urls);
            Curl_safefree(storefile);
            if(result) {
              /* bad globbing */
              warnf(global, "bad output glob");
              break;
            }
            if(!*per->outfile) {
              warnf(global, "output glob produces empty string");
              result = CURLE_WRITE_ERROR;
              break;
            }
          }

          if(config->output_dir && *config->output_dir) {
            char *d = aprintf("%s/%s", config->output_dir, per->outfile);
            if(!d) {
              result = CURLE_WRITE_ERROR;
              break;
            }
            free(per->outfile);
            per->outfile = d;
          }
          /* Create the directory hierarchy, if not pre-existent to a multiple
             file output call */

          if(config->create_dirs) {
            result = create_dir_hierarchy(per->outfile, global);
            /* create_dir_hierarchy shows error upon CURLE_WRITE_ERROR */
            if(result)
              break;
          }

          if((urlnode->flags & GETOUT_USEREMOTE)
             && config->content_disposition) {
            /* Our header callback MIGHT set the filename */
            DEBUGASSERT(!outs->filename);
          }

          if(config->resume_from_current) {
            /* We're told to continue from where we are now. Get the size
               of the file as it is now and open it for append instead */
            struct_stat fileinfo;
            /* VMS -- Danger, the filesize is only valid for stream files */
            if(0 == stat(per->outfile, &fileinfo))
              /* set offset to current file size: */
              config->resume_from = fileinfo.st_size;
            else
              /* let offset be 0 */
              config->resume_from = 0;
          }

          if(config->resume_from) {
#ifdef __VMS
            /* open file for output, forcing VMS output format into stream
               mode which is needed for stat() call above to always work. */
            FILE *file = fopen(outfile, "ab",
                               "ctx=stm", "rfm=stmlf", "rat=cr", "mrs=0");
#else
            /* open file for output: */
            FILE *file = fopen(per->outfile, "ab");
#endif
            if(!file) {
              errorf(global, "Can't open '%s'", per->outfile);
              result = CURLE_WRITE_ERROR;
              break;
            }
            outs->fopened = TRUE;
            outs->stream = file;
            outs->init = config->resume_from;
          }
          else {
            outs->stream = NULL; /* open when needed */
          }
          outs->filename = per->outfile;
          outs->s_isreg = TRUE;
        }

        if(per->uploadfile && !stdin_upload(per->uploadfile)) {
          /*
           * We have specified a file to upload and it isn't "-".
           */
          result = add_file_name_to_url(per->curl, &per->this_url,
                                        per->uploadfile);
          if(result)
            break;
        }
        else if(per->uploadfile && stdin_upload(per->uploadfile)) {
          /* count to see if there are more than one auth bit set
             in the authtype field */
          int authbits = 0;
          int bitcheck = 0;
          while(bitcheck < 32) {
            if(config->authtype & (1UL << bitcheck++)) {
              authbits++;
              if(authbits > 1) {
                /* more than one, we're done! */
                break;
              }
            }
          }

          /*
           * If the user has also selected --anyauth or --proxy-anyauth
           * we should warn them.
           */
          if(config->proxyanyauth || (authbits>1)) {
            warnf(global,
                  "Using --anyauth or --proxy-anyauth with upload from stdin"
                  " involves a big risk of it not working. Use a temporary"
                  " file or a fixed auth type instead");
          }

          DEBUGASSERT(per->infdopen == FALSE);
          DEBUGASSERT(per->infd == STDIN_FILENO);

          set_binmode(stdin);
          if(!strcmp(per->uploadfile, ".")) {
            if(curlx_nonblock((curl_socket_t)per->infd, TRUE) < 0)
              warnf(global,
                    "fcntl failed on fd=%d: %s", per->infd, strerror(errno));
          }
        }

        if(per->uploadfile && config->resume_from_current)
          config->resume_from = -1; /* -1 will then force get-it-yourself */

        if(output_expected(per->this_url, per->uploadfile) && outs->stream &&
           isatty(fileno(outs->stream)))
          /* we send the output to a tty, therefore we switch off the progress
             meter */
          per->noprogress = global->noprogress = global->isatty = TRUE;
        else {
          /* progress meter is per download, so restore config
             values */
          per->noprogress = global->noprogress = orig_noprogress;
          global->isatty = orig_isatty;
        }

        if(httpgetfields || config->query) {
          char *q = httpgetfields ? httpgetfields : config->query;
          CURLU *uh = curl_url();
          if(uh) {
            CURLUcode uerr;
            uerr = curl_url_set(uh, CURLUPART_URL, per->this_url,
                            CURLU_GUESS_SCHEME);
            if(uerr) {
              result = urlerr_cvt(uerr);
              errorf(global, "(%d) Could not parse the URL, "
                     "failed to set query", result);
              config->synthetic_error = TRUE;
            }
            else {
              char *updated = NULL;
              uerr = curl_url_set(uh, CURLUPART_QUERY, q, CURLU_APPENDQUERY);
              if(!uerr)
                uerr = curl_url_get(uh, CURLUPART_URL, &updated,
                                   CURLU_GUESS_SCHEME);
              if(uerr)
                result = urlerr_cvt(uerr);
              else {
                Curl_safefree(per->this_url); /* free previous URL */
                per->this_url = updated; /* use our new URL instead! */
              }
            }
            curl_url_cleanup(uh);
            if(result)
              break;
          }
        }

        if((!per->outfile || !strcmp(per->outfile, "-")) &&
           !config->use_ascii) {
          /* We get the output to stdout and we have not got the ASCII/text
             flag, then set stdout to be binary */
          set_binmode(stdout);
        }

        /* explicitly passed to stdout means okaying binary gunk */
        config->terminal_binary_ok =
          (per->outfile && !strcmp(per->outfile, "-"));

        /* Avoid having this setopt added to the --libcurl source output. */
        result = curl_easy_setopt(curl, CURLOPT_SHARE, share);
        if(result)
          break;

        /* result is only used when for ipfs and ipns, ignored otherwise */
        result = url_proto(&per->this_url, config, &use_proto);
        if(result && (use_proto == proto_ipfs || use_proto == proto_ipns))
          break;

        /* On most modern OSes, exiting works thoroughly,
           we'll clean everything up via exit(), so don't bother with
           slow cleanups. Crappy ones might need to skip this.
           Note: avoid having this setopt added to the --libcurl source
           output. */
        result = curl_easy_setopt(curl, CURLOPT_QUICK_EXIT, 1L);
        if(result)
          break;

        if(!config->tcp_nodelay)
          my_setopt(curl, CURLOPT_TCP_NODELAY, 0L);

        if(config->tcp_fastopen)
          my_setopt(curl, CURLOPT_TCP_FASTOPEN, 1L);

        /* where to store */
        my_setopt(curl, CURLOPT_WRITEDATA, per);
        my_setopt(curl, CURLOPT_INTERLEAVEDATA, per);

        /* what call to write */
        my_setopt(curl, CURLOPT_WRITEFUNCTION, tool_write_cb);

        /* Note that if CURLOPT_READFUNCTION is fread (the default), then
         * lib/telnet.c will Curl_poll() on the input file descriptor
         * rather than calling the READFUNCTION at regular intervals.
         * The circumstances in which it is preferable to enable this
         * behavior, by omitting to set the READFUNCTION & READDATA options,
         * have not been determined.
         */
        my_setopt(curl, CURLOPT_READDATA, per);
        /* what call to read */
        my_setopt(curl, CURLOPT_READFUNCTION, tool_read_cb);

        /* in 7.18.0, the CURLOPT_SEEKFUNCTION/DATA pair is taking over what
           CURLOPT_IOCTLFUNCTION/DATA pair previously provided for seeking */
        my_setopt(curl, CURLOPT_SEEKDATA, per);
        my_setopt(curl, CURLOPT_SEEKFUNCTION, tool_seek_cb);

        {
#ifdef CURLDEBUG
          char *env = getenv("CURL_BUFFERSIZE");
          if(env) {
            long size = strtol(env, NULL, 10);
            if(size)
              my_setopt(curl, CURLOPT_BUFFERSIZE, size);
          }
          else
#endif
          if(config->recvpersecond &&
             (config->recvpersecond < BUFFER_SIZE))
            /* use a smaller sized buffer for better sleeps */
            my_setopt(curl, CURLOPT_BUFFERSIZE, (long)config->recvpersecond);
          else
            my_setopt(curl, CURLOPT_BUFFERSIZE, (long)BUFFER_SIZE);
        }

        my_setopt_str(curl, CURLOPT_URL, per->this_url);
        my_setopt(curl, CURLOPT_NOPROGRESS,
                  global->noprogress || global->silent?1L:0L);
        if(config->no_body)
          my_setopt(curl, CURLOPT_NOBODY, 1L);

        if(config->oauth_bearer)
          my_setopt_str(curl, CURLOPT_XOAUTH2_BEARER, config->oauth_bearer);

        my_setopt_str(curl, CURLOPT_PROXY, config->proxy);

        if(config->proxy && result) {
          errorf(global, "proxy support is disabled in this libcurl");
          config->synthetic_error = TRUE;
          result = CURLE_NOT_BUILT_IN;
          break;
        }

        /* new in libcurl 7.5 */
        if(config->proxy)
          my_setopt_enum(curl, CURLOPT_PROXYTYPE, config->proxyver);

        my_setopt_str(curl, CURLOPT_PROXYUSERPWD, config->proxyuserpwd);

        /* new in libcurl 7.3 */
        my_setopt(curl, CURLOPT_HTTPPROXYTUNNEL, config->proxytunnel?1L:0L);

        /* new in libcurl 7.52.0 */
        if(config->preproxy)
          my_setopt_str(curl, CURLOPT_PRE_PROXY, config->preproxy);

        /* new in libcurl 7.10.6 */
        if(config->proxyanyauth)
          my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
                            (long)CURLAUTH_ANY);
        else if(config->proxynegotiate)
          my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
                            (long)CURLAUTH_GSSNEGOTIATE);
        else if(config->proxyntlm)
          my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
                            (long)CURLAUTH_NTLM);
        else if(config->proxydigest)
          my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
                            (long)CURLAUTH_DIGEST);
        else if(config->proxybasic)
          my_setopt_bitmask(curl, CURLOPT_PROXYAUTH,
                            (long)CURLAUTH_BASIC);

        /* new in libcurl 7.19.4 */
        my_setopt_str(curl, CURLOPT_NOPROXY, config->noproxy);

        my_setopt(curl, CURLOPT_SUPPRESS_CONNECT_HEADERS,
                  config->suppress_connect_headers?1L:0L);

        my_setopt(curl, CURLOPT_FAILONERROR, config->failonerror?1L:0L);
        my_setopt(curl, CURLOPT_REQUEST_TARGET, config->request_target);
        my_setopt(curl, CURLOPT_UPLOAD, per->uploadfile?1L:0L);
        my_setopt(curl, CURLOPT_DIRLISTONLY, config->dirlistonly?1L:0L);
        my_setopt(curl, CURLOPT_APPEND, config->ftp_append?1L:0L);

        if(config->netrc_opt)
          my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_OPTIONAL);
        else if(config->netrc || config->netrc_file)
          my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_REQUIRED);
        else
          my_setopt_enum(curl, CURLOPT_NETRC, (long)CURL_NETRC_IGNORED);

        if(config->netrc_file)
          my_setopt_str(curl, CURLOPT_NETRC_FILE, config->netrc_file);

        my_setopt(curl, CURLOPT_TRANSFERTEXT, config->use_ascii?1L:0L);
        if(config->login_options)
          my_setopt_str(curl, CURLOPT_LOGIN_OPTIONS, config->login_options);
        my_setopt_str(curl, CURLOPT_USERPWD, config->userpwd);
        my_setopt_str(curl, CURLOPT_RANGE, config->range);
        if(!global->parallel) {
          per->errorbuffer = global_errorbuffer;
          my_setopt(curl, CURLOPT_ERRORBUFFER, global_errorbuffer);
        }
        my_setopt(curl, CURLOPT_TIMEOUT_MS, config->timeout_ms);

        switch(config->httpreq) {
        case HTTPREQ_SIMPLEPOST:
          if(config->resume_from) {
            errorf(global, "cannot mix --continue-at with --data");
            result = CURLE_FAILED_INIT;
          }
          else {
            my_setopt_str(curl, CURLOPT_POSTFIELDS,
                          curlx_dyn_ptr(&config->postdata));
            my_setopt(curl, CURLOPT_POSTFIELDSIZE_LARGE,
                      (curl_off_t)curlx_dyn_len(&config->postdata));
          }
          break;
        case HTTPREQ_MIMEPOST:
          /* free previous remainders */
          curl_mime_free(config->mimepost);
          config->mimepost = NULL;
          if(config->resume_from) {
            errorf(global, "cannot mix --continue-at with --form");
            result = CURLE_FAILED_INIT;
          }
          else {
            result = tool2curlmime(curl, config->mimeroot, &config->mimepost);
            if(!result)
              my_setopt_mimepost(curl, CURLOPT_MIMEPOST, config->mimepost);
          }
          break;
        default:
          break;
        }
        if(result)
          break;

        /* new in libcurl 7.81.0 */
        if(config->mime_options)
          my_setopt(curl, CURLOPT_MIME_OPTIONS, config->mime_options);

        /* new in libcurl 7.10.6 (default is Basic) */
        if(config->authtype)
          my_setopt_bitmask(curl, CURLOPT_HTTPAUTH, (long)config->authtype);

        my_setopt_slist(curl, CURLOPT_HTTPHEADER, config->headers);

        if(proto_http || proto_rtsp) {
          my_setopt_str(curl, CURLOPT_REFERER, config->referer);
          my_setopt_str(curl, CURLOPT_USERAGENT, config->useragent);
        }

        if(proto_http) {
          long postRedir = 0;

          my_setopt(curl, CURLOPT_FOLLOWLOCATION,
                    config->followlocation?1L:0L);
          my_setopt(curl, CURLOPT_UNRESTRICTED_AUTH,
                    config->unrestricted_auth?1L:0L);
          my_setopt_str(curl, CURLOPT_AWS_SIGV4, config->aws_sigv4);
          my_setopt(curl, CURLOPT_AUTOREFERER, config->autoreferer?1L:0L);

          /* new in libcurl 7.36.0 */
          if(config->proxyheaders) {
            my_setopt_slist(curl, CURLOPT_PROXYHEADER, config->proxyheaders);
            my_setopt(curl, CURLOPT_HEADEROPT, (long)CURLHEADER_SEPARATE);
          }

          /* new in libcurl 7.5 */
          my_setopt(curl, CURLOPT_MAXREDIRS, config->maxredirs);

          if(config->httpversion)
            my_setopt_enum(curl, CURLOPT_HTTP_VERSION, config->httpversion);
          else if(feature_http2)
            my_setopt_enum(curl, CURLOPT_HTTP_VERSION, CURL_HTTP_VERSION_2TLS);

          /* curl 7.19.1 (the 301 version existed in 7.18.2),
             303 was added in 7.26.0 */
          if(config->post301)
            postRedir |= CURL_REDIR_POST_301;
          if(config->post302)
            postRedir |= CURL_REDIR_POST_302;
          if(config->post303)
            postRedir |= CURL_REDIR_POST_303;
          my_setopt(curl, CURLOPT_POSTREDIR, postRedir);

          /* new in libcurl 7.21.6 */
          if(config->encoding)
            my_setopt_str(curl, CURLOPT_ACCEPT_ENCODING, "");

          /* new in libcurl 7.21.6 */
          if(config->tr_encoding)
            my_setopt(curl, CURLOPT_TRANSFER_ENCODING, 1L);
          /* new in libcurl 7.64.0 */
          my_setopt(curl, CURLOPT_HTTP09_ALLOWED,
                    config->http09_allowed ? 1L : 0L);
          if(result) {
            errorf(global, "HTTP/0.9 is not supported in this build");
            return result;
          }

        } /* (proto_http) */

        if(proto_ftp)
          my_setopt_str(curl, CURLOPT_FTPPORT, config->ftpport);
        my_setopt(curl, CURLOPT_LOW_SPEED_LIMIT,
                  config->low_speed_limit);
        my_setopt(curl, CURLOPT_LOW_SPEED_TIME, config->low_speed_time);
        my_setopt(curl, CURLOPT_MAX_SEND_SPEED_LARGE,
                  config->sendpersecond);
        my_setopt(curl, CURLOPT_MAX_RECV_SPEED_LARGE,
                  config->recvpersecond);

        if(config->use_resume)
          my_setopt(curl, CURLOPT_RESUME_FROM_LARGE, config->resume_from);
        else
          my_setopt(curl, CURLOPT_RESUME_FROM_LARGE, CURL_OFF_T_C(0));

        my_setopt_str(curl, CURLOPT_KEYPASSWD, config->key_passwd);
        my_setopt_str(curl, CURLOPT_PROXY_KEYPASSWD, config->proxy_key_passwd);

        if(use_proto == proto_scp || use_proto == proto_sftp) {
          /* SSH and SSL private key uses same command-line option */
          /* new in libcurl 7.16.1 */
          my_setopt_str(curl, CURLOPT_SSH_PRIVATE_KEYFILE, config->key);
          /* new in libcurl 7.16.1 */
          my_setopt_str(curl, CURLOPT_SSH_PUBLIC_KEYFILE, config->pubkey);

          /* new in libcurl 7.17.1: SSH host key md5 checking allows us
             to fail if we are not talking to who we think we should */
          my_setopt_str(curl, CURLOPT_SSH_HOST_PUBLIC_KEY_MD5,
                        config->hostpubmd5);

          /* new in libcurl 7.80.0: SSH host key sha256 checking allows us
             to fail if we are not talking to who we think we should */
          my_setopt_str(curl, CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256,
              config->hostpubsha256);

          /* new in libcurl 7.56.0 */
          if(config->ssh_compression)
            my_setopt(curl, CURLOPT_SSH_COMPRESSION, 1L);
        }

        if(config->cacert)
          my_setopt_str(curl, CURLOPT_CAINFO, config->cacert);
        if(config->proxy_cacert)
          my_setopt_str(curl, CURLOPT_PROXY_CAINFO, config->proxy_cacert);

        if(config->capath) {
          result = res_setopt_str(curl, CURLOPT_CAPATH, config->capath);
          if(result == CURLE_NOT_BUILT_IN) {
            warnf(global, "ignoring %s, not supported by libcurl",
                  capath_from_env?
                  "SSL_CERT_DIR environment variable":"--capath");
          }
          else if(result)
            break;
        }
        /* For the time being if --proxy-capath is not set then we use the
           --capath value for it, if any. See #1257 */
        if(config->proxy_capath || config->capath) {
          result = res_setopt_str(curl, CURLOPT_PROXY_CAPATH,
                                  (config->proxy_capath ?
                                   config->proxy_capath :
                                   config->capath));
          if((result == CURLE_NOT_BUILT_IN) ||
             (result == CURLE_UNKNOWN_OPTION)) {
            if(config->proxy_capath) {
              warnf(global,
                    "ignoring --proxy-capath, not supported by libcurl");
            }
          }
          else if(result)
            break;
        }

        if(config->crlfile)
          my_setopt_str(curl, CURLOPT_CRLFILE, config->crlfile);
        if(config->proxy_crlfile)
          my_setopt_str(curl, CURLOPT_PROXY_CRLFILE, config->proxy_crlfile);
        else if(config->crlfile) /* CURLOPT_PROXY_CRLFILE default is crlfile */
          my_setopt_str(curl, CURLOPT_PROXY_CRLFILE, config->crlfile);

        if(config->pinnedpubkey)
          my_setopt_str(curl, CURLOPT_PINNEDPUBLICKEY, config->pinnedpubkey);

        if(config->ssl_ec_curves)
          my_setopt_str(curl, CURLOPT_SSL_EC_CURVES, config->ssl_ec_curves);

        if(config->writeout)
          my_setopt_str(curl, CURLOPT_CERTINFO, 1L);

        if(feature_ssl) {
          /* Check if config->cert is a PKCS#11 URI and set the
           * config->cert_type if necessary */
          if(config->cert) {
            if(!config->cert_type) {
              if(is_pkcs11_uri(config->cert)) {
                config->cert_type = strdup("ENG");
              }
            }
          }

          /* Check if config->key is a PKCS#11 URI and set the
           * config->key_type if necessary */
          if(config->key) {
            if(!config->key_type) {
              if(is_pkcs11_uri(config->key)) {
                config->key_type = strdup("ENG");
              }
            }
          }

          /* Check if config->proxy_cert is a PKCS#11 URI and set the
           * config->proxy_type if necessary */
          if(config->proxy_cert) {
            if(!config->proxy_cert_type) {
              if(is_pkcs11_uri(config->proxy_cert)) {
                config->proxy_cert_type = strdup("ENG");
              }
            }
          }

          /* Check if config->proxy_key is a PKCS#11 URI and set the
           * config->proxy_key_type if necessary */
          if(config->proxy_key) {
            if(!config->proxy_key_type) {
              if(is_pkcs11_uri(config->proxy_key)) {
                config->proxy_key_type = strdup("ENG");
              }
            }
          }

          /* In debug build of curl tool, using
           *    --cert loadmem=<filename>:<password> --cert-type p12
           *  must do the same thing as classic:
           *    --cert <filename>:<password> --cert-type p12
           *  but is designed to test blob */
#if defined(CURLDEBUG) || defined(DEBUGBUILD)
          if(config->cert && (strlen(config->cert) > 8) &&
             (memcmp(config->cert, "loadmem=",8) == 0)) {
            FILE *fInCert = fopen(config->cert + 8, "rb");
            void *certdata = NULL;
            long filesize = 0;
            bool continue_reading = fInCert != NULL;
            if(continue_reading)
              continue_reading = fseek(fInCert, 0, SEEK_END) == 0;
            if(continue_reading)
              filesize = ftell(fInCert);
            if(filesize < 0)
              continue_reading = FALSE;
            if(continue_reading)
              continue_reading = fseek(fInCert, 0, SEEK_SET) == 0;
            if(continue_reading)
              certdata = malloc(((size_t)filesize) + 1);
            if((!certdata) ||
                ((int)fread(certdata, (size_t)filesize, 1, fInCert) != 1))
              continue_reading = FALSE;
            if(fInCert)
              fclose(fInCert);
            if((filesize > 0) && continue_reading) {
              struct curl_blob structblob;
              structblob.data = certdata;
              structblob.len = (size_t)filesize;
              structblob.flags = CURL_BLOB_COPY;
              my_setopt_str(curl, CURLOPT_SSLCERT_BLOB, &structblob);
              /* if test run well, we are sure we don't reuse
               * original mem pointer */
              memset(certdata, 0, (size_t)filesize);
            }
            free(certdata);
          }
          else
#endif
          my_setopt_str(curl, CURLOPT_SSLCERT, config->cert);
          my_setopt_str(curl, CURLOPT_PROXY_SSLCERT, config->proxy_cert);
          my_setopt_str(curl, CURLOPT_SSLCERTTYPE, config->cert_type);
          my_setopt_str(curl, CURLOPT_PROXY_SSLCERTTYPE,
                        config->proxy_cert_type);


#if defined(CURLDEBUG) || defined(DEBUGBUILD)
          if(config->key && (strlen(config->key) > 8) &&
             (memcmp(config->key, "loadmem=",8) == 0)) {
            FILE *fInCert = fopen(config->key + 8, "rb");
            void *certdata = NULL;
            long filesize = 0;
            bool continue_reading = fInCert != NULL;
            if(continue_reading)
              continue_reading = fseek(fInCert, 0, SEEK_END) == 0;
            if(continue_reading)
              filesize = ftell(fInCert);
            if(filesize < 0)
              continue_reading = FALSE;
            if(continue_reading)
              continue_reading = fseek(fInCert, 0, SEEK_SET) == 0;
            if(continue_reading)
              certdata = malloc(((size_t)filesize) + 1);
            if((!certdata) ||
                ((int)fread(certdata, (size_t)filesize, 1, fInCert) != 1))
              continue_reading = FALSE;
            if(fInCert)
              fclose(fInCert);
            if((filesize > 0) && continue_reading) {
              struct curl_blob structblob;
              structblob.data = certdata;
              structblob.len = (size_t)filesize;
              structblob.flags = CURL_BLOB_COPY;
              my_setopt_str(curl, CURLOPT_SSLKEY_BLOB, &structblob);
              /* if test run well, we are sure we don't reuse
               * original mem pointer */
              memset(certdata, 0, (size_t)filesize);
            }
            free(certdata);
          }
          else
#endif
          my_setopt_str(curl, CURLOPT_SSLKEY, config->key);
          my_setopt_str(curl, CURLOPT_PROXY_SSLKEY, config->proxy_key);
          my_setopt_str(curl, CURLOPT_SSLKEYTYPE, config->key_type);
          my_setopt_str(curl, CURLOPT_PROXY_SSLKEYTYPE,
                        config->proxy_key_type);
          if(config->insecure_ok) {
            my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L);
            my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0L);
          }
          else {
            my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L);
            /* libcurl default is strict verifyhost -> 2L   */
            /* my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 2L); */
          }

          if(config->doh_insecure_ok) {
            my_setopt(curl, CURLOPT_DOH_SSL_VERIFYPEER, 0L);
            my_setopt(curl, CURLOPT_DOH_SSL_VERIFYHOST, 0L);
          }

          if(config->proxy_insecure_ok) {
            my_setopt(curl, CURLOPT_PROXY_SSL_VERIFYPEER, 0L);
            my_setopt(curl, CURLOPT_PROXY_SSL_VERIFYHOST, 0L);
          }
          else {
            my_setopt(curl, CURLOPT_PROXY_SSL_VERIFYPEER, 1L);
          }

          if(config->verifystatus)
            my_setopt(curl, CURLOPT_SSL_VERIFYSTATUS, 1L);

          if(config->doh_verifystatus)
            my_setopt(curl, CURLOPT_DOH_SSL_VERIFYSTATUS, 1L);

          if(config->falsestart)
            my_setopt(curl, CURLOPT_SSL_FALSESTART, 1L);

          my_setopt_enum(curl, CURLOPT_SSLVERSION,
                         config->ssl_version | config->ssl_version_max);
          if(config->proxy)
            my_setopt_enum(curl, CURLOPT_PROXY_SSLVERSION,
                           config->proxy_ssl_version);

          {
            long mask =
              (config->ssl_allow_beast ?
               CURLSSLOPT_ALLOW_BEAST : 0) |
              (config->ssl_no_revoke ?
               CURLSSLOPT_NO_REVOKE : 0) |
              (config->ssl_revoke_best_effort ?
               CURLSSLOPT_REVOKE_BEST_EFFORT : 0) |
              (config->native_ca_store ?
               CURLSSLOPT_NATIVE_CA : 0) |
              (config->ssl_auto_client_cert ?
               CURLSSLOPT_AUTO_CLIENT_CERT : 0);

            if(mask)
              my_setopt_bitmask(curl, CURLOPT_SSL_OPTIONS, mask);
          }

          {
            long mask =
              (config->proxy_ssl_allow_beast ?
               CURLSSLOPT_ALLOW_BEAST : 0) |
              (config->proxy_ssl_auto_client_cert ?
               CURLSSLOPT_AUTO_CLIENT_CERT : 0) |
              (config->proxy_native_ca_store ?
               CURLSSLOPT_NATIVE_CA : 0);

            if(mask)
              my_setopt_bitmask(curl, CURLOPT_PROXY_SSL_OPTIONS, mask);
          }
        }

        if(config->path_as_is)
          my_setopt(curl, CURLOPT_PATH_AS_IS, 1L);

        if((use_proto == proto_scp || use_proto == proto_sftp) &&
           !config->insecure_ok) {
          char *known = findfile(".ssh/known_hosts", FALSE);
          if(known) {
            /* new in curl 7.19.6 */
            result = res_setopt_str(curl, CURLOPT_SSH_KNOWNHOSTS, known);
            curl_free(known);
            if(result == CURLE_UNKNOWN_OPTION)
              /* libssh2 version older than 1.1.1 */
              result = CURLE_OK;
            if(result)
              break;
          }
          else
            warnf(global, "Couldn't find a known_hosts file");
        }

        if(config->no_body || config->remote_time) {
          /* no body or use remote time */
          my_setopt(curl, CURLOPT_FILETIME, 1L);
        }

        my_setopt(curl, CURLOPT_CRLF, config->crlf?1L:0L);
        my_setopt_slist(curl, CURLOPT_QUOTE, config->quote);
        my_setopt_slist(curl, CURLOPT_POSTQUOTE, config->postquote);
        my_setopt_slist(curl, CURLOPT_PREQUOTE, config->prequote);

        if(config->cookies) {
          struct curlx_dynbuf cookies;
          struct curl_slist *cl;

          /* The maximum size needs to match MAX_NAME in cookie.h */
#define MAX_COOKIE_LINE 8200
          curlx_dyn_init(&cookies, MAX_COOKIE_LINE);
          for(cl = config->cookies; cl; cl = cl->next) {
            if(cl == config->cookies)
              result = curlx_dyn_addf(&cookies, "%s", cl->data);
            else
              result = curlx_dyn_addf(&cookies, ";%s", cl->data);

            if(result) {
              warnf(global,
                    "skipped provided cookie, the cookie header "
                    "would go over %u bytes", MAX_COOKIE_LINE);
              break;
            }
          }

          my_setopt_str(curl, CURLOPT_COOKIE, curlx_dyn_ptr(&cookies));
          curlx_dyn_free(&cookies);
        }

        if(config->cookiefiles) {
          struct curl_slist *cfl;

          for(cfl = config->cookiefiles; cfl; cfl = cfl->next)
            my_setopt_str(curl, CURLOPT_COOKIEFILE, cfl->data);
        }

        /* new in libcurl 7.9 */
        if(config->cookiejar)
          my_setopt_str(curl, CURLOPT_COOKIEJAR, config->cookiejar);

        /* new in libcurl 7.9.7 */
        my_setopt(curl, CURLOPT_COOKIESESSION, config->cookiesession?1L:0L);

        my_setopt_enum(curl, CURLOPT_TIMECONDITION, (long)config->timecond);
        my_setopt(curl, CURLOPT_TIMEVALUE_LARGE, config->condtime);
        my_setopt_str(curl, CURLOPT_CUSTOMREQUEST, config->customrequest);
        customrequest_helper(config, config->httpreq, config->customrequest);
        my_setopt(curl, CURLOPT_STDERR, tool_stderr);

        /* three new ones in libcurl 7.3: */
        my_setopt_str(curl, CURLOPT_INTERFACE, config->iface);
        my_setopt_str(curl, CURLOPT_KRBLEVEL, config->krblevel);
        progressbarinit(&per->progressbar, config);

        if((global->progressmode == CURL_PROGRESS_BAR) &&
           !global->noprogress && !global->silent) {
          /* we want the alternative style, then we have to implement it
             ourselves! */
          my_setopt(curl, CURLOPT_XFERINFOFUNCTION, tool_progress_cb);
          my_setopt(curl, CURLOPT_XFERINFODATA, per);
        }
        else if(per->uploadfile && !strcmp(per->uploadfile, ".")) {
          /* when reading from stdin in non-blocking mode, we use the progress
             function to unpause a busy read */
          my_setopt(curl, CURLOPT_NOPROGRESS, 0L);
          my_setopt(curl, CURLOPT_XFERINFOFUNCTION, tool_readbusy_cb);
          my_setopt(curl, CURLOPT_XFERINFODATA, per);
        }

        /* new in libcurl 7.24.0: */
        if(config->dns_servers)
          my_setopt_str(curl, CURLOPT_DNS_SERVERS, config->dns_servers);

        /* new in libcurl 7.33.0: */
        if(config->dns_interface)
          my_setopt_str(curl, CURLOPT_DNS_INTERFACE, config->dns_interface);
        if(config->dns_ipv4_addr)
          my_setopt_str(curl, CURLOPT_DNS_LOCAL_IP4, config->dns_ipv4_addr);
        if(config->dns_ipv6_addr)
          my_setopt_str(curl, CURLOPT_DNS_LOCAL_IP6, config->dns_ipv6_addr);

        /* new in libcurl 7.6.2: */
        my_setopt_slist(curl, CURLOPT_TELNETOPTIONS, config->telnet_options);

        /* new in libcurl 7.7: */
        my_setopt(curl, CURLOPT_CONNECTTIMEOUT_MS, config->connecttimeout_ms);

        if(config->doh_url)
          my_setopt_str(curl, CURLOPT_DOH_URL, config->doh_url);

        if(config->cipher_list)
          my_setopt_str(curl, CURLOPT_SSL_CIPHER_LIST, config->cipher_list);

        if(config->proxy_cipher_list)
          my_setopt_str(curl, CURLOPT_PROXY_SSL_CIPHER_LIST,
                        config->proxy_cipher_list);

        if(config->cipher13_list)
          my_setopt_str(curl, CURLOPT_TLS13_CIPHERS, config->cipher13_list);

        if(config->proxy_cipher13_list)
          my_setopt_str(curl, CURLOPT_PROXY_TLS13_CIPHERS,
                        config->proxy_cipher13_list);

        /* new in libcurl 7.9.2: */
        if(config->disable_epsv)
          /* disable it */
          my_setopt(curl, CURLOPT_FTP_USE_EPSV, 0L);

        /* new in libcurl 7.10.5 */
        if(config->disable_eprt)
          /* disable it */
          my_setopt(curl, CURLOPT_FTP_USE_EPRT, 0L);

        if(global->tracetype != TRACE_NONE) {
          my_setopt(curl, CURLOPT_DEBUGFUNCTION, tool_debug_cb);
          my_setopt(curl, CURLOPT_DEBUGDATA, config);
          my_setopt(curl, CURLOPT_VERBOSE, 1L);
        }

        /* new in curl 7.9.3 */
        if(config->engine) {
          result = res_setopt_str(curl, CURLOPT_SSLENGINE, config->engine);
          if(result)
            break;
        }

        /* new in curl 7.10.7, extended in 7.19.4. Modified to use
           CREATE_DIR_RETRY in 7.49.0 */
        my_setopt(curl, CURLOPT_FTP_CREATE_MISSING_DIRS,
                  (long)(config->ftp_create_dirs?
                         CURLFTP_CREATE_DIR_RETRY:
                         CURLFTP_CREATE_DIR_NONE));

        /* new in curl 7.10.8 */
        if(config->max_filesize)
          my_setopt(curl, CURLOPT_MAXFILESIZE_LARGE,
                    config->max_filesize);

        my_setopt(curl, CURLOPT_IPRESOLVE, config->ip_version);

        /* new in curl 7.15.5 */
        if(config->ftp_ssl_reqd)
          my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_ALL);

        /* new in curl 7.11.0 */
        else if(config->ftp_ssl)
          my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_TRY);

        /* new in curl 7.16.0 */
        else if(config->ftp_ssl_control)
          my_setopt_enum(curl, CURLOPT_USE_SSL, (long)CURLUSESSL_CONTROL);

        /* new in curl 7.16.1 */
        if(config->ftp_ssl_ccc)
          my_setopt_enum(curl, CURLOPT_FTP_SSL_CCC,
                         (long)config->ftp_ssl_ccc_mode);

        /* new in curl 7.19.4 */
        if(config->socks5_gssapi_nec)
          my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_NEC, 1L);

        /* new in curl 7.55.0 */
        if(config->socks5_auth)
          my_setopt_bitmask(curl, CURLOPT_SOCKS5_AUTH,
                            (long)config->socks5_auth);

        /* new in curl 7.43.0 */
        if(config->proxy_service_name)
          my_setopt_str(curl, CURLOPT_PROXY_SERVICE_NAME,
                        config->proxy_service_name);

        /* new in curl 7.43.0 */
        if(config->service_name)
          my_setopt_str(curl, CURLOPT_SERVICE_NAME,
                        config->service_name);

        /* curl 7.13.0 */
        my_setopt_str(curl, CURLOPT_FTP_ACCOUNT, config->ftp_account);
        my_setopt(curl, CURLOPT_IGNORE_CONTENT_LENGTH, config->ignorecl?1L:0L);

        /* curl 7.14.2 */
        my_setopt(curl, CURLOPT_FTP_SKIP_PASV_IP, config->ftp_skip_ip?1L:0L);

        /* curl 7.15.1 */
        if(proto_ftp)
          my_setopt(curl, CURLOPT_FTP_FILEMETHOD,
                    (long)config->ftp_filemethod);

        /* curl 7.15.2 */
        if(config->localport) {
          my_setopt(curl, CURLOPT_LOCALPORT, config->localport);
          my_setopt_str(curl, CURLOPT_LOCALPORTRANGE, config->localportrange);
        }

        /* curl 7.15.5 */
        my_setopt_str(curl, CURLOPT_FTP_ALTERNATIVE_TO_USER,
                      config->ftp_alternative_to_user);

        /* curl 7.16.0 */
        if(config->disable_sessionid)
          /* disable it */
          my_setopt(curl, CURLOPT_SSL_SESSIONID_CACHE, 0L);

        /* curl 7.16.2 */
        if(config->raw) {
          my_setopt(curl, CURLOPT_HTTP_CONTENT_DECODING, 0L);
          my_setopt(curl, CURLOPT_HTTP_TRANSFER_DECODING, 0L);
        }

        /* curl 7.17.1 */
        if(!config->nokeepalive) {
          my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 1L);
          if(config->alivetime) {
            my_setopt(curl, CURLOPT_TCP_KEEPIDLE, config->alivetime);
            my_setopt(curl, CURLOPT_TCP_KEEPINTVL, config->alivetime);
          }
        }
        else
          my_setopt(curl, CURLOPT_TCP_KEEPALIVE, 0L);

        /* curl 7.20.0 */
        if(config->tftp_blksize && proto_tftp)
          my_setopt(curl, CURLOPT_TFTP_BLKSIZE, config->tftp_blksize);

        if(config->mail_from)
          my_setopt_str(curl, CURLOPT_MAIL_FROM, config->mail_from);

        if(config->mail_rcpt)
          my_setopt_slist(curl, CURLOPT_MAIL_RCPT, config->mail_rcpt);

        /* curl 7.69.x */
        my_setopt(curl, CURLOPT_MAIL_RCPT_ALLOWFAILS,
                  config->mail_rcpt_allowfails ? 1L : 0L);

        /* curl 7.20.x */
        if(config->ftp_pret)
          my_setopt(curl, CURLOPT_FTP_USE_PRET, 1L);

        if(config->create_file_mode)
          my_setopt(curl, CURLOPT_NEW_FILE_PERMS, config->create_file_mode);

        if(config->proto_present)
          my_setopt_str(curl, CURLOPT_PROTOCOLS_STR, config->proto_str);
        if(config->proto_redir_present)
          my_setopt_str(curl, CURLOPT_REDIR_PROTOCOLS_STR,
                        config->proto_redir_str);

        if(config->content_disposition
           && (urlnode->flags & GETOUT_USEREMOTE))
          hdrcbdata->honor_cd_filename = TRUE;
        else
          hdrcbdata->honor_cd_filename = FALSE;

        hdrcbdata->outs = outs;
        hdrcbdata->heads = heads;
        hdrcbdata->etag_save = etag_save;
        hdrcbdata->global = global;
        hdrcbdata->config = config;

        my_setopt(curl, CURLOPT_HEADERFUNCTION, tool_header_cb);
        my_setopt(curl, CURLOPT_HEADERDATA, per);

        if(config->resolve)
          /* new in 7.21.3 */
          my_setopt_slist(curl, CURLOPT_RESOLVE, config->resolve);

        if(config->connect_to)
          /* new in 7.49.0 */
          my_setopt_slist(curl, CURLOPT_CONNECT_TO, config->connect_to);

        /* new in 7.21.4 */
        if(feature_tls_srp) {
          if(config->tls_username)
            my_setopt_str(curl, CURLOPT_TLSAUTH_USERNAME,
                          config->tls_username);
          if(config->tls_password)
            my_setopt_str(curl, CURLOPT_TLSAUTH_PASSWORD,
                          config->tls_password);
          if(config->tls_authtype)
            my_setopt_str(curl, CURLOPT_TLSAUTH_TYPE,
                          config->tls_authtype);
          if(config->proxy_tls_username)
            my_setopt_str(curl, CURLOPT_PROXY_TLSAUTH_USERNAME,
                          config->proxy_tls_username);
          if(config->proxy_tls_password)
            my_setopt_str(curl, CURLOPT_PROXY_TLSAUTH_PASSWORD,
                          config->proxy_tls_password);
          if(config->proxy_tls_authtype)
            my_setopt_str(curl, CURLOPT_PROXY_TLSAUTH_TYPE,
                          config->proxy_tls_authtype);
        }

        /* new in 7.22.0 */
        if(config->gssapi_delegation)
          my_setopt_str(curl, CURLOPT_GSSAPI_DELEGATION,
                        config->gssapi_delegation);

        if(config->mail_auth)
          my_setopt_str(curl, CURLOPT_MAIL_AUTH, config->mail_auth);

        /* new in 7.66.0 */
        if(config->sasl_authzid)
          my_setopt_str(curl, CURLOPT_SASL_AUTHZID, config->sasl_authzid);

        /* new in 7.31.0 */
        if(config->sasl_ir)
          my_setopt(curl, CURLOPT_SASL_IR, 1L);

        if(config->noalpn) {
          my_setopt(curl, CURLOPT_SSL_ENABLE_ALPN, 0L);
        }

        /* new in 7.40.0, abstract support added in 7.53.0 */
        if(config->unix_socket_path) {
          if(config->abstract_unix_socket) {
            my_setopt_str(curl, CURLOPT_ABSTRACT_UNIX_SOCKET,
                          config->unix_socket_path);
          }
          else {
            my_setopt_str(curl, CURLOPT_UNIX_SOCKET_PATH,
                          config->unix_socket_path);
          }
        }

        /* new in 7.45.0 */
        if(config->proto_default)
          my_setopt_str(curl, CURLOPT_DEFAULT_PROTOCOL, config->proto_default);

        /* new in 7.47.0 */
        if(config->expect100timeout_ms > 0)
          my_setopt_str(curl, CURLOPT_EXPECT_100_TIMEOUT_MS,
                        config->expect100timeout_ms);

        /* new in 7.48.0 */
        if(config->tftp_no_options && proto_tftp)
          my_setopt(curl, CURLOPT_TFTP_NO_OPTIONS, 1L);

        /* new in 7.59.0 */
        if(config->happy_eyeballs_timeout_ms != CURL_HET_DEFAULT)
          my_setopt(curl, CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS,
                    config->happy_eyeballs_timeout_ms);

        /* new in 7.60.0 */
        if(config->haproxy_protocol)
          my_setopt(curl, CURLOPT_HAPROXYPROTOCOL, 1L);

        /* new in 8.2.0 */
        if(config->haproxy_clientip)
          my_setopt_str(curl, CURLOPT_HAPROXY_CLIENT_IP,
              config->haproxy_clientip);

        if(config->disallow_username_in_url)
          my_setopt(curl, CURLOPT_DISALLOW_USERNAME_IN_URL, 1L);

        if(config->altsvc)
          my_setopt_str(curl, CURLOPT_ALTSVC, config->altsvc);

        if(config->hsts)
          my_setopt_str(curl, CURLOPT_HSTS, config->hsts);

        /* initialize retry vars for loop below */
        per->retry_sleep_default = (config->retry_delay) ?
          config->retry_delay*1000L : RETRY_SLEEP_DEFAULT; /* ms */
        per->retry_numretries = config->req_retry;
        per->retry_sleep = per->retry_sleep_default; /* ms */
        per->retrystart = tvnow();

        state->li++;
        /* Here's looping around each globbed URL */
        if(state->li >= urlnum) {
          state->li = 0;
          state->urlnum = 0; /* forced reglob of URLs */
          glob_cleanup(state->urls);
          state->urls = NULL;
          state->up++;
          Curl_safefree(state->uploadfile); /* clear it to get the next */
        }
      }
      else {
        /* Free this URL node data without destroying the
           node itself nor modifying next pointer. */
        Curl_safefree(urlnode->outfile);
        Curl_safefree(urlnode->infile);
        urlnode->flags = 0;
        glob_cleanup(state->urls);
        state->urls = NULL;
        state->urlnum = 0;

        Curl_safefree(state->outfiles);
        Curl_safefree(state->uploadfile);
        if(state->inglob) {
          /* Free list of globbed upload files */
          glob_cleanup(state->inglob);
          state->inglob = NULL;
        }
        config->state.urlnode = urlnode->next;
        state->up = 0;
        continue;
      }
    }
    break;
  }
  Curl_safefree(state->outfiles);

  if(!*added || result) {
    *added = FALSE;
    single_transfer_cleanup(config);
  }
  return result;
}

static long all_added; /* number of easy handles currently added */

/*
 * add_parallel_transfers() sets 'morep' to TRUE if there are more transfers
 * to add even after this call returns. sets 'addedp' to TRUE if one or more
 * transfers were added.
 */
static CURLcode add_parallel_transfers(struct GlobalConfig *global,
                                       CURLM *multi,
                                       CURLSH *share,
                                       bool *morep,
                                       bool *addedp)
{
  struct per_transfer *per;
  CURLcode result = CURLE_OK;
  CURLMcode mcode;
  bool sleeping = FALSE;
  char *errorbuf;
  *addedp = FALSE;
  *morep = FALSE;
  if(all_pers < (global->parallel_max*2)) {
    result = create_transfer(global, share, addedp);
    if(result)
      return result;
  }
  for(per = transfers; per && (all_added < global->parallel_max);
      per = per->next) {
    bool getadded = FALSE;
    if(per->added)
      /* already added */
      continue;
    if(per->startat && (time(NULL) < per->startat)) {
      /* this is still delaying */
      sleeping = TRUE;
      continue;
    }
    per->added = TRUE;

    result = pre_transfer(global, per);
    if(result)
      return result;

    errorbuf = malloc(CURL_ERROR_SIZE);
    if(!errorbuf)
      return CURLE_OUT_OF_MEMORY;

    /* parallel connect means that we don't set PIPEWAIT since pipewait
       will make libcurl prefer multiplexing */
    (void)curl_easy_setopt(per->curl, CURLOPT_PIPEWAIT,
                           global->parallel_connect ? 0L : 1L);
    (void)curl_easy_setopt(per->curl, CURLOPT_PRIVATE, per);
    (void)curl_easy_setopt(per->curl, CURLOPT_XFERINFOFUNCTION, xferinfo_cb);
    (void)curl_easy_setopt(per->curl, CURLOPT_XFERINFODATA, per);
    (void)curl_easy_setopt(per->curl, CURLOPT_NOPROGRESS, 0L);

    mcode = curl_multi_add_handle(multi, per->curl);
    if(mcode) {
      DEBUGASSERT(mcode == CURLM_OUT_OF_MEMORY);
      result = CURLE_OUT_OF_MEMORY;
    }

    if(!result)
      result = create_transfer(global, share, &getadded);
    if(result) {
      free(errorbuf);
      return result;
    }
    errorbuf[0] = 0;
    (void)curl_easy_setopt(per->curl, CURLOPT_ERRORBUFFER, errorbuf);
    per->errorbuffer = errorbuf;
    per->added = TRUE;
    all_added++;
    *addedp = TRUE;
  }
  *morep = (per || sleeping) ? TRUE : FALSE;
  return CURLE_OK;
}

static CURLcode parallel_transfers(struct GlobalConfig *global,
                                   CURLSH *share)
{
  CURLM *multi;
  CURLMcode mcode = CURLM_OK;
  CURLcode result = CURLE_OK;
  int still_running = 1;
  struct timeval start = tvnow();
  bool more_transfers;
  bool added_transfers;
  /* wrapitup is set TRUE after a critical error occurs to end all transfers */
  bool wrapitup = FALSE;
  /* wrapitup_processed is set TRUE after the per transfer abort flag is set */
  bool wrapitup_processed = FALSE;
  time_t tick = time(NULL);

  multi = curl_multi_init();
  if(!multi)
    return CURLE_OUT_OF_MEMORY;

  result = add_parallel_transfers(global, multi, share,
                                  &more_transfers, &added_transfers);
  if(result) {
    curl_multi_cleanup(multi);
    return result;
  }

  while(!mcode && (still_running || more_transfers)) {
    /* If stopping prematurely (eg due to a --fail-early condition) then signal
       that any transfers in the multi should abort (via progress callback). */
    if(wrapitup) {
      if(!still_running)
        break;
      if(!wrapitup_processed) {
        struct per_transfer *per;
        for(per = transfers; per; per = per->next) {
          if(per->added)
            per->abort = TRUE;
        }
        wrapitup_processed = TRUE;
      }
    }

    mcode = curl_multi_poll(multi, NULL, 0, 1000, NULL);
    if(!mcode)
      mcode = curl_multi_perform(multi, &still_running);

    progress_meter(global, &start, FALSE);

    if(!mcode) {
      int rc;
      CURLMsg *msg;
      bool checkmore = FALSE;
      do {
        msg = curl_multi_info_read(multi, &rc);
        if(msg) {
          bool retry;
          long delay;
          struct per_transfer *ended;
          CURL *easy = msg->easy_handle;
          CURLcode tres = msg->data.result;
          curl_easy_getinfo(easy, CURLINFO_PRIVATE, (void *)&ended);
          curl_multi_remove_handle(multi, easy);

          if(ended->abort && (tres == CURLE_ABORTED_BY_CALLBACK) &&
             ended->errorbuffer) {
            msnprintf(ended->errorbuffer, CURL_ERROR_SIZE,
                      "Transfer aborted due to critical error "
                      "in another transfer");
          }
          tres = post_per_transfer(global, ended, tres, &retry, &delay);
          progress_finalize(ended); /* before it goes away */
          all_added--; /* one fewer added */
          checkmore = TRUE;
          if(retry) {
            ended->added = FALSE; /* add it again */
            /* we delay retries in full integer seconds only */
            ended->startat = delay ? time(NULL) + delay/1000 : 0;
          }
          else {
            /* result receives this transfer's error unless the transfer was
               marked for abort due to a critical error in another transfer */
            if(tres && (!ended->abort || !result))
              result = tres;
            if(is_fatal_error(result) || (result && global->fail_early))
              wrapitup = TRUE;
            (void)del_per_transfer(ended);
          }
        }
      } while(msg);
      if(wrapitup) {
        if(still_running)
          continue;
        else
          break;
      }
      if(!checkmore) {
        time_t tock = time(NULL);
        if(tick != tock) {
          checkmore = TRUE;
          tick = tock;
        }
      }
      if(checkmore) {
        /* one or more transfers completed, add more! */
        CURLcode tres = add_parallel_transfers(global, multi, share,
                                               &more_transfers,
                                               &added_transfers);
        if(tres)
          result = tres;
        if(added_transfers)
          /* we added new ones, make sure the loop doesn't exit yet */
          still_running = 1;
      }
      if(is_fatal_error(result) || (result && global->fail_early))
        wrapitup = TRUE;
    }
  }

  (void)progress_meter(global, &start, TRUE);

  /* Make sure to return some kind of error if there was a multi problem */
  if(mcode) {
    result = (mcode == CURLM_OUT_OF_MEMORY) ? CURLE_OUT_OF_MEMORY :
      /* The other multi errors should never happen, so return
         something suitably generic */
      CURLE_BAD_FUNCTION_ARGUMENT;
  }

  curl_multi_cleanup(multi);

  return result;
}

static CURLcode serial_transfers(struct GlobalConfig *global,
                                 CURLSH *share)
{
  CURLcode returncode = CURLE_OK;
  CURLcode result = CURLE_OK;
  struct per_transfer *per;
  bool added = FALSE;

  result = create_transfer(global, share, &added);
  if(result)
    return result;
  if(!added) {
    errorf(global, "no transfer performed");
    return CURLE_READ_ERROR;
  }
  for(per = transfers; per;) {
    bool retry;
    long delay_ms;
    bool bailout = FALSE;
    struct timeval start;
    result = pre_transfer(global, per);
    if(result)
      break;

    if(global->libcurl) {
      result = easysrc_perform();
      if(result)
        break;
    }
    start = tvnow();
#ifdef CURLDEBUG
    if(global->test_event_based)
      result = curl_easy_perform_ev(per->curl);
    else
#endif
      result = curl_easy_perform(per->curl);

    returncode = post_per_transfer(global, per, result, &retry, &delay_ms);
    if(retry) {
      tool_go_sleep(delay_ms);
      continue;
    }

    /* Bail out upon critical errors or --fail-early */
    if(is_fatal_error(returncode) || (returncode && global->fail_early))
      bailout = TRUE;
    else {
      /* setup the next one just before we delete this */
      result = create_transfer(global, share, &added);
      if(result) {
        returncode = result;
        bailout = TRUE;
      }
    }

    per = del_per_transfer(per);

    if(bailout)
      break;

    if(per && global->ms_per_transfer) {
      /* how long time did the most recent transfer take in number of
         milliseconds */
      long milli = tvdiff(tvnow(), start);
      if(milli < global->ms_per_transfer) {
        notef(global, "Transfer took %ld ms, waits %ldms as set by --rate",
              milli, global->ms_per_transfer - milli);
        /* The transfer took less time than wanted. Wait a little. */
        tool_go_sleep(global->ms_per_transfer - milli);
      }
    }
  }
  if(returncode)
    /* returncode errors have priority */
    result = returncode;

  if(result)
    single_transfer_cleanup(global->current);

  return result;
}

/* setup a transfer for the given config */
static CURLcode transfer_per_config(struct GlobalConfig *global,
                                    struct OperationConfig *config,
                                    CURLSH *share,
                                    bool *added)
{
  CURLcode result = CURLE_OK;
  bool capath_from_env;
  *added = FALSE;

  /* Check we have a url */
  if(!config->url_list || !config->url_list->url) {
    helpf(tool_stderr, "(%d) no URL specified", CURLE_FAILED_INIT);
    return CURLE_FAILED_INIT;
  }

  /* On WIN32 we can't set the path to curl-ca-bundle.crt
   * at compile time. So we look here for the file in two ways:
   * 1: look at the environment variable CURL_CA_BUNDLE for a path
   * 2: if #1 isn't found, use the windows API function SearchPath()
   *    to find it along the app's path (includes app's dir and CWD)
   *
   * We support the environment variable thing for non-Windows platforms
   * too. Just for the sake of it.
   */
  capath_from_env = false;
  if(!config->cacert &&
     !config->capath &&
     (!config->insecure_ok || (config->doh_url && !config->doh_insecure_ok))) {
    CURL *curltls = curl_easy_init();
    struct curl_tlssessioninfo *tls_backend_info = NULL;

    /* With the addition of CAINFO support for Schannel, this search could find
     * a certificate bundle that was previously ignored. To maintain backward
     * compatibility, only perform this search if not using Schannel.
     */
    result = curl_easy_getinfo(curltls, CURLINFO_TLS_SSL_PTR,
                               &tls_backend_info);
    if(result) {
      curl_easy_cleanup(curltls);
      return result;
    }

    /* Set the CA cert locations specified in the environment. For Windows if
     * no environment-specified filename is found then check for CA bundle
     * default filename curl-ca-bundle.crt in the user's PATH.
     *
     * If Schannel is the selected SSL backend then these locations are
     * ignored. We allow setting CA location for schannel only when explicitly
     * specified by the user via CURLOPT_CAINFO / --cacert.
     */
    if(tls_backend_info->backend != CURLSSLBACKEND_SCHANNEL) {
      char *env;
      env = curlx_getenv("CURL_CA_BUNDLE");
      if(env) {
        config->cacert = strdup(env);
        if(!config->cacert) {
          curl_free(env);
          curl_easy_cleanup(curltls);
          errorf(global, "out of memory");
          return CURLE_OUT_OF_MEMORY;
        }
      }
      else {
        env = curlx_getenv("SSL_CERT_DIR");
        if(env) {
          config->capath = strdup(env);
          if(!config->capath) {
            curl_free(env);
            curl_easy_cleanup(curltls);
            errorf(global, "out of memory");
            return CURLE_OUT_OF_MEMORY;
          }
          curl_free(env);
          capath_from_env = true;
        }
        env = curlx_getenv("SSL_CERT_FILE");
        if(env) {
          config->cacert = strdup(env);
          if(!config->cacert) {
            curl_free(env);
            if(capath_from_env)
              free(config->capath);
            curl_easy_cleanup(curltls);
            errorf(global, "out of memory");
            return CURLE_OUT_OF_MEMORY;
          }
        }
      }

      if(env)
        curl_free(env);
#ifdef _WIN32
      else {
        result = FindWin32CACert(config, tls_backend_info->backend,
                                 TEXT("curl-ca-bundle.crt"));
      }
#endif
    }
    curl_easy_cleanup(curltls);
  }

  if(!result)
    result = single_transfer(global, config, share, capath_from_env, added);

  return result;
}

/*
 * 'create_transfer' gets the details and sets up a new transfer if 'added'
 * returns TRUE.
 */
static CURLcode create_transfer(struct GlobalConfig *global,
                                CURLSH *share,
                                bool *added)
{
  CURLcode result = CURLE_OK;
  *added = FALSE;
  while(global->current) {
    result = transfer_per_config(global, global->current, share, added);
    if(!result && !*added) {
      /* when one set is drained, continue to next */
      global->current = global->current->next;
      continue;
    }
    break;
  }
  return result;
}

static CURLcode run_all_transfers(struct GlobalConfig *global,
                                  CURLSH *share,
                                  CURLcode result)
{
  /* Save the values of noprogress and isatty to restore them later on */
  bool orig_noprogress = global->noprogress;
  bool orig_isatty = global->isatty;
  struct per_transfer *per;

  /* Time to actually do the transfers */
  if(!result) {
    if(global->parallel)
      result = parallel_transfers(global, share);
    else
      result = serial_transfers(global, share);
  }

  /* cleanup if there are any left */
  for(per = transfers; per;) {
    bool retry;
    long delay;
    CURLcode result2 = post_per_transfer(global, per, result, &retry, &delay);
    if(!result)
      /* don't overwrite the original error */
      result = result2;

    /* Free list of given URLs */
    clean_getout(per->config);

    per = del_per_transfer(per);
  }

  /* Reset the global config variables */
  global->noprogress = orig_noprogress;
  global->isatty = orig_isatty;


  return result;
}

CURLcode operate(struct GlobalConfig *global, int argc, argv_item_t argv[])
{
  CURLcode result = CURLE_OK;
  char *first_arg = argc > 1 ? curlx_convert_tchar_to_UTF8(argv[1]) : NULL;

#ifdef HAVE_SETLOCALE
  /* Override locale for number parsing (only) */
  setlocale(LC_ALL, "");
  setlocale(LC_NUMERIC, "C");
#endif

  /* Parse .curlrc if necessary */
  if((argc == 1) ||
     (first_arg && strncmp(first_arg, "-q", 2) &&
      !curl_strequal(first_arg, "--disable"))) {
    parseconfig(NULL, global); /* ignore possible failure */

    /* If we had no arguments then make sure a url was specified in .curlrc */
    if((argc < 2) && (!global->first->url_list)) {
      helpf(tool_stderr, NULL);
      result = CURLE_FAILED_INIT;
    }
  }

  curlx_unicodefree(first_arg);

  if(!result) {
    /* Parse the command line arguments */
    ParameterError res = parse_args(global, argc, argv);
    if(res) {
      result = CURLE_OK;

      /* Check if we were asked for the help */
      if(res == PARAM_HELP_REQUESTED)
        tool_help(global->help_category);
      /* Check if we were asked for the manual */
      else if(res == PARAM_MANUAL_REQUESTED)
        hugehelp();
      /* Check if we were asked for the version information */
      else if(res == PARAM_VERSION_INFO_REQUESTED)
        tool_version_info();
      /* Check if we were asked to list the SSL engines */
      else if(res == PARAM_ENGINES_REQUESTED)
        tool_list_engines();
      else if(res == PARAM_LIBCURL_UNSUPPORTED_PROTOCOL)
        result = CURLE_UNSUPPORTED_PROTOCOL;
      else if(res == PARAM_READ_ERROR)
        result = CURLE_READ_ERROR;
      else
        result = CURLE_FAILED_INIT;
    }
    else {
      if(global->libcurl) {
        /* Initialise the libcurl source output */
        result = easysrc_init();
      }

      /* Perform the main operations */
      if(!result) {
        size_t count = 0;
        struct OperationConfig *operation = global->first;
        CURLSH *share = curl_share_init();
        if(!share) {
          if(global->libcurl) {
            /* Cleanup the libcurl source output */
            easysrc_cleanup();
          }
          result = CURLE_OUT_OF_MEMORY;
        }

        if(!result) {
          curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_COOKIE);
          curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_DNS);
          curl_share_setopt(share, CURLSHOPT_SHARE,
                            CURL_LOCK_DATA_SSL_SESSION);
          curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_CONNECT);
          curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_PSL);
          curl_share_setopt(share, CURLSHOPT_SHARE, CURL_LOCK_DATA_HSTS);

          /* Get the required arguments for each operation */
          do {
            result = get_args(operation, count++);

            operation = operation->next;
          } while(!result && operation);

          /* Set the current operation pointer */
          global->current = global->first;

          /* now run! */
          result = run_all_transfers(global, share, result);

          curl_share_cleanup(share);
          if(global->libcurl) {
            /* Cleanup the libcurl source output */
            easysrc_cleanup();

            /* Dump the libcurl code if previously enabled */
            dumpeasysrc(global);
          }
        }
      }
      else
        errorf(global, "out of memory");
    }
  }

  varcleanup(global);

  return result;
}